MEILOON RFTRSPIPADRX Bluetooth Speaker User Manual RF TRSPIPAD 11 1052 QSG V2 EN eps

Meiloon Industrial Co., Ltd. Bluetooth Speaker RF TRSPIPAD 11 1052 QSG V2 EN eps

Manual

QUICK SETUP GUIDEBluetooth Speaker for iPad 2RF-TRSPIPADThank you for purchasing this high quality Rocketsh product. Your Bluetooth speaker represents the state-of-the-art in iPad® accessories and is designed to integrate easily into your iPad’s Smart Cover. Charging your speakers fully for the rst timePlug the small end of the included USB cable into the speakers and the other end into an available USB port on your computer. It takes approximately two hours to fully charge your speakers.Note: You can charge your speakers and listen to audio at the same time.Installing the speaker unit into the Smart CoverPlace the highlighted areas of the speaker unit and the Smart Cover together in the orientation illustrated in Step 1, then proceed with the rest of the steps.Turning on and pairing your devicesTurn on the speakers by pushing in on the side with the power on icon. This should turn on the unit and automatically put it in pairing mode. (Repeat the action on the opposite side to pop out the other speaker for better audio quality.) To pair with your iPad:From the Home screen, choose Settings > General > Bluetooth and turn Bluetooth on. iPad searches for nearby Bluetooth accessories.Choose and Accept the Bluetooth accessory. This device is identied as RF-TRSPIPAD.If needed, please refer to your iPad manual for additional pairing information. LED is Constant Green if connection is established with iPad 2.Established connection (Green LED)Charging in Progress indicator(Red blinking LED)Full Charge indicator(Constant green LED)Note: Speakers will work with most Bluetooth audio devices.Speaker unitSmart CoverRF-TRSPIPAD_11-1052_QSG_V2_EN.eps 1 9/19/2011 7:22:16 PMRF-TRSPIPAD_11-1052_QSG_V2_EN.eps 1 9/19/2011 7:22:16 PMV2FINALFOR PRINT
ENGLISH 11-1052LED blinks red and green alternately when no connection is established. Speaker goes into sleep mode after 3 minutes, and LED turns o. Note: Please make sure to disconnect (unpair) the RF-TRSPIPAD speakers from your iPad before attempting to pair your speakers with another Bluetooth device.ResetWhen pairing is not established after 3 minutes repeat the “turning on” sequence, by rst pushing in the side of the speaker unit with the power on icon.Enjoying your speakersTo enjoy your music or videos, place your iPad 2 with speakers in either orientation indicated.LED indicatorsCharge statusFull Charge indicator: Green LEDCharge not Full: Blinking Red LEDPairing statusConnection: Constant Green LEDNo Connection: LED blinking alternately red and greenOut of range: Constant Red LEDLegal noticeFCC and IC information (English version)This device complies with Part 15 of the FCC Rules and Industry license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measure:- Reorient or relocate the receiving antenna- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.Warning: Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.One-year limited warrantyVisit www.rocketshproducts.com for details.Contact Rocketsh:For customer service, call 1-800-620-2790www.rocketshproducts.com© 2011 BBY Solutions, Inc. All Rights Reserved.Distributed by Best Buy Purchasing, LLC7601 Penn Avenue South, Richeld, MN USA 55423-3645ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand names are trademarks of their respective owners.RF-TRSPIPAD_11-1052_QSG_V2_EN.eps 2 9/19/2011 7:22:25 PMRF-TRSPIPAD_11-1052_QSG_V2_EN.eps 2 9/19/2011 7:22:25 PM

Navigation menu