Meisida Electronic Toys 090727 1:18 Aflac Monster Truck User Manual Instrustion Sheet02

Meisida Electronic Toys Co., Ltd 1:18 Aflac Monster Truck Instrustion Sheet02

User Manual

Operation Manual: Please read this manual carefully before operation. Please keep this manual for any needed future reference.FOR AGE GROUP 8+WARNINGS！WARNINGS！Improper use of battery may lead to dangers such as heat, breakageor leakage, Note the following itemsStrictly observe the methods and cautions of the operation manualLeakage from the battery may cause skin irritation. Recommendation isto immediately and thoroughly cleanse the irritated area with soap and water.Do not place battery into water or fire or puncture the battery.Dispose of any exhausted batteries properly.Leakage from the battery that has come in contact with the eye may causeblindness. Cleanse the polluted eye immediately and consult doctor’sadvice on further treatmentDo not use, charge, or store batteries in places that are in close proximityto fire, heat, or moisture.Not recommended for children under 8years of age. As with all electrical products, precautions should beobserved during handling and used to reduce the risk of electric shock:--CAUTION ELECTRIC TOYLoading & Unloading of the Battery of Remote Controller1.Using 9V battery2.Follow the arrow direction to remove the battery cover.3.See below illustration. Install the 9V battery after checkingthe positive and negative polarity, replace the battery cover.4.The duration for continuous operation of the remote controllerbattery is 8 hours..Method of Taking the Car out from the Foam.Illustration I Illustration II1 Use a pair of scissorsto snip the string underthe foam. (See Illustration I.)2 Take the Car out fromthe foam. (See Illustration II.)..CAUTIONS!CAUTIONS!a.-..-...-, .,.,:../M ke sure to switch off after playNon rechargeable batteries are not to be rechargedRechargeable batteries are to be removed from the toy before charging.Rechargeable batteries are only to be charged under adult supervisionDifferent types of batteries or new and used batteries are not to be mixedas it may affect operation of the R/C.Batteries are to be inserted with the correct polarity.Exhausted batteries are to be removed from the toy and disposed ofproperly.The supply terminals are not to be short circuitedChanges or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority to operatethe equipmentThe toy is not to be connected to more than the recommended numberof power suppliesThe antenna is not to be inserted into any light sockets or wall outlets.This equipment has been tested and found to comply with the limitsfor a Class B digital device pursuant to Part15 of the FCC RulesThese limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction, may causeharmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installationIf this equipment does cause harmful interference to radio or televisionwhich can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of thefollowing measuresReorient or relocate the receiving antennaIncrease the separation between the equipment and receiverConnect the equipment into an outlet on a circuit different fromthat to which the receive is connectedConsult the dealer or an experienced radio TV technician for help.Main power switchONOFFLoading & Unloading of the Batteries of Toy Car1 Using x 1.5V AA alkalinebatteries.23 See above illustration. Remove the battery cover by loosening screw,install the 6pcs AA batteries inside the battery grooves following the positiveand negative polarity as shown on each battery groove, replace the batterycover over the battery compartment and affix the cover by re-tighteningthe screw.4 When the AA batteries are exhausted, Turn “OFF” the switch, loosen thescrew on the battery cover, remove the battery cover, take out the exhaustedAA batteries, and dispose of exhausted batteries properly. Reinstall newAA batteries.....Turn the switch “OFF”6Remarks: 1. Don't connect the toy to the voltage which is higher than recommended.2. Make sure the loading & unloading of the batteries of the toy caris under adult supervision.3. Remove batteries before storing car for extended period of time.Cautions in OperationCaution: Don’t insert fingers or other objectsinto the gaps between the wheel and car body.Operation should only be performed underclose adult supervision. Don’t touch thewheels or the front frame joining when the carswitch is turned “ON”.Caution: Don’t brandish the antenna or pointthe antenna toward anyone’s face as accidentalinjury could occur in the event the antenna tipwent into the eye. Should the antenna bedamaged in any way, please be sure to replaceit due to the possibility of injury. Do not placethe antenna into any socket so as to avoidelectric shock.Caution: Don’t play with the car on roads orin crowded places to avoid accident or injury.Also, don’t run the car on the restive placessuch as a wet or sandy surface as this shalllead to breakdown of the toy.Indication for the Function of Remote ControllerForwardForward LeftBackward Left Backward RightForward RightBackwardCautions:1. The car runs in fast speed, please make sure to keepothers away to avoid crash or damage to car.2. Make sure not to insert fingers or other objects into the gapsbetween wheels & axles when playing to avoid any accidental injury.For more information, visitwww.1BADDRIDE.com© 2009 Professional Collectibles Ltd.Made in China
Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu