Meisida Electronic Toys MSD09021990 STUNT ROLLING CAR User Manual MSD0902

Meisida Electronic Toys Co., Ltd STUNT ROLLING CAR MSD0902

Users Manual

Download: Meisida Electronic Toys MSD09021990 STUNT ROLLING CAR User Manual MSD0902
Mirror Download [FCC.gov]Meisida Electronic Toys MSD09021990 STUNT ROLLING CAR User Manual MSD0902
Document ID1316315
Application IDsjKAHLRmnqnto7USOkdkrw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize3.59kB (44825 bits)
Date Submitted2010-07-22 00:00:00
Date Available2010-07-22 00:00:00
Creation Date2010-07-21 17:28:03
Producing SoftwarepdfFactory Pro 3.35 (Windows XP Professional Chinese)
Document Lastmod2010-07-21 11:54:54
Document TitleMSD0902user manual.doc
Document CreatorpdfFactory Pro www.fineprint.cn
Document Author: a

NOTE:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with limits for a Class B
digital-device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
1, Reorient or relocate the receiving antenna.
2, Increase the separation between the equipment and receiver.
3, Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
4, Consult the dealer or an experienced radio / TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
INSTRUCTION MANUALS
As with all electrical products, precautions should be observed during handling
and use to reduce the risk of electric shock.
The charger be periodically examined for conditions that may result in the risk of
fire, electric shock, or injury to persons and that, in an event such conditions, the
charger should not be used until properly repaired.
1. Our product, item no MSD0902 Super Rolling Car, contains“ CAR
BODY”,“TRANSMITTER”
2. Put a 9.0v alkaline battery into the transmitter and 4 X1.5V AA batteries
into the car body
3. Pull out the antenna, and turn on the power switch, then you can use the
controllers to move the car.
4. Single movement: if you press the left switch of the controller to “GO”, the
car goes forward; and to “ BACK ”,the car moves in reverse. if you press the
switch at the right to “STEERING” and move it to to the left or to the
right ,the car turns left or right.
5. Advanced movement:
A. If you press the left switch to “ GO ” and, at the same time ,the right
switch to “ ROLL ”, the car goes forward, accelerating, rolling, or
turning left or right.
B. If you press the left switch to “ BACK ”,and the right switch to
“ ROLL ”the car reverses, accelerating, rolling, or turning left or right.
6. The charger can be used for more than 20 minutes after 4 or 6 hours charging.
to take the battery out, press the red button.
ATTENTION.
1. The car can be dismantled. make sure children do not put the parts in their mouth.
2. For proper functioning and longer service life of the car. you should use the battery
pack produced only by our company.
3. Charge the battery till it is cool. take the batteries out when it is not in use.
4. Should the battery pack rust, do not open or charge it.
5. Do not place the battery near fire or heat.
6. Keep the plastic parts bags away from children.
7. Cast the packing in the waste bin when it is removed from the unit.
8. The battery pack included should be charged before use.
BATTERY SAFETY INSTRUCTIONS
Ensure the battery compartments are secure.
Only use the batteries recommended.
Ensure correct fit of batteries, observing the polarity.
Replace a full set of batteries at one time.
Store unused batteries in their packaging and keep away from metal objects
that may cause a short circuit.
Remove dead batteries from equipment.
Remove batteries from appliances that will not be used again for a long time.
Supervise children with batteries at all times.
Remember to keep small button cell and AAA batteries away from small
children as they can easily be swallowed.
Seek medical attention if batteries are swallowed.
Do not mix old and new batteries.
Do not mix different types of batteries.
Never dispose of batteries in a fire.
Do not attempt to recharge ordinary batteries.
WARNING!
Not suitable for children under 3 years due to small
components which may cause a choking hazard.
PLEASE KEEP THE PACKAGING FOR FUTURE USE
WARNINGS
Please retain information for future reference.
Made in China
Adult supervision required at all times.
Colour and contents may vary from those illustrated.
All packaging materials such as tape, plastic bags, plastic sheets, wire ties
and tags are not part of the toy and should be discarded for childrens’ safety.
Use on a flat surface only.
Do not play in car parks or on roads or crowded places.
Do not try to catch the car while it is running.
Avoid getting the car wet and do not play while it is raining or snowing.
Keep away from high temperatures.
Keep objects such as fingers, hair and material away from the wheels.
You may experience some interference with similar frequencies, avoid
using this product near items that cause interference.
Do not aim the car at people or animals.
The crossed out wheelie bin symbol on this item indicates that this
appliance needs to be disposed of in an environmentally friendly way
when it becomes of no further use or has worn out. Contact your local
authority for details of where to take this item for re-cycling.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 3
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:a5e3c1e1-67fd-40d3-8b7f-01a1070f3ee7
Producer                        : pdfFactory Pro 3.35 (Windows XP Professional Chinese)
Create Date                     : 2010:07:21 17:28:03+08:00
Creator Tool                    : pdfFactory Pro www.fineprint.cn
Modify Date                     : 2010:07:21 11:54:54-07:00
Metadata Date                   : 2010:07:21 11:54:54-07:00
Document ID                     : uuid:26bcff16-69d4-4034-be26-2a2500795914
Format                          : application/pdf
Title                           : MSD0902user manual.doc
Creator                         : a
Author                          : a
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PV5MSD09021990

Navigation menu