Memorex Mvd4540 Users Manual

MVD4540 to the manual 78096723-800a-8a74-d16a-e28572636bad

2015-01-24

: Memorex Memorex-Mvd4540-Users-Manual-345483 memorex-mvd4540-users-manual-345483 memorex pdf

Open the PDF directly: View PDF .
Page Count: 61

Download
Open PDF In Browser	View PDF

DVD PLAYER / Hi-Fi VIDEO CASSETE RECORDER
DVD COMPACTOS / VIDEOGRABADOR Hi-Fi ESTEREO

MVD4540

ATTENTION
ATENCION
If you purchase a universal remote control from your local retailer, please contact the
remote manufacturer for the required programming code.
Si usted a comprado un control remoto universal, por favor comunicace con el fabricante
para el codico de programaccion requerido.

TV/CATV MODE SELECTION
SELECCION DE MODO DE TV/CATV
When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable
Television) mode.
If not using CATV (Cable TV), set this menu option to the "TV" mode.
Al salir la unidad de fábrica, la opción de menú de TV/CATV se ajusta al modo de
"CATV" (Televisión por cable).
Si no utiliza CATV, ajuste esta opción de menú al modo de "TV".

Before operating the unit, please read this manual thoroughly.
Antes de usar la unidad, lea detenidadmente este manual de instrucciones.

2A77001AE Cover

8/29/02, 10:52 AM

ESPAÑOL ENGLISH

OWNER’S MANUAL
MANUAL DE INSTRUCCIONES

ENGLISH
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product's enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.

The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
NOTE:
Please keep all packaging material for at least 90 days in case you need to return this product to your place of purchase
or Memorex.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with
the FCC Rules could void the user's authority to operate this equipment.
CAUTION:
THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CAREFULLY AND
RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN
AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE
LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO
BEAM.
Location of the required Marking
The rating sheet and the safety caution are on the rear of the unit.
DVD OUTPUT
DIGITAL AUDIO
OPTICAL

CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.

AUDIO
L

S-VIDEO COMPONENT
Y

VIDEO

PB/CB

L
AUDIO

PR/CR

( ANT. )

OUT
( TV )

CH.
3

2
2A77001AE(02-05)

COAXIAL

8/29/02, 10:51 AM

1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning the exterior cabinet only.
6. ATTACHMENTS
The manufacturer of this unit does not make any recommendations for attachments, as they may cause
hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
PORTABLE CART WARNING
(symbol provided by RETAC)
8. ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury, and serious damage to the unit.
8A. An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
9. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation,
S3125A
to ensure reliable operation of the unit, and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided and/or the manufacturer’s instructions have been adhered to.
10. POWER SOURCES
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equipped
with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet.Do not defeat the safety purpose of the grounding-type plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.

3
2A77001AE(02-05)

8/29/02, 10:51 AM

ENGLISH

IMPORTANT SAFEGUARDS

IMPORTANT SAFEGUARDS
13. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
unit due to lightning and power line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits, as
contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the
National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode.
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f . When the unit exhibits a distinct change in performance, this indicates a need for service.
20. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
22. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
23. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
24. DISC TRAY
Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.
25. CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's
manual of the other equipment carefully and follow the instructions when making any connections.

4
2A77001AE(02-05)

8/29/02, 10:51 AM

IMPORTANT SAFEGUARDS / Power Source
ENGLISH

26. LASER BEAM
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the
laser beam. It may cause sight damage.
27. DISC
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.
28. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

GROUND CLAMP

ELECTRIC SERVICE
EQUIPMENT

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS

NEC-NATIONAL ELECTRICAL CODE
S2898A

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

CONDENSATION
Moisture will form in the operating section of the DVD/VCR if the player is brought from cool surroundings into a
warm room or if the temperature of the room rises suddenly. When this happens, the DVD/VCR's performance
will be impaired.
To prevent this, let the DVD/VCR stand in its new surroundings for about an hour before switching it on, or
make sure that the room temperature rises gradually.
Condensation may also form during the summer if the DVD/VCR is exposed to the breeze from an air
conditioner. In such cases, change the location of the DVD/VCR.

Power Source
AC Outlet
Wider Hole
and Blade

Polarized AC Cord Plug
(One blade is wider than the other.)

TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert
the AC cord plug into a standard 120V 60Hz polarized AC outlet.
NOTES:
• Never connect the AC line cord plug to other than the specified
voltage (120V 60Hz). Use the attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC
outlet, do not attempt to file or cut the blade. It is the user’s
responsibility to have an electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the
unit fails to function, simply unplug the unit from the AC outlet
and plug it back in. The unit should return to normal operation.

5
2A77001AE(02-05)

8/29/02, 10:51 AM

Features
DVD/CD Player/Video Cassette Recorder
• DVD/CD player with Video Cassette Recorder - Unique space saving design combines a DVD/CD player and a Hi-Fi Video
cassette recorder. The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture quality is higher
than Super VHS. Audio quality is higher than audio CD. The DVD PLAYER can play back audio CDs.
• High Quality Picture - More than 500 lines (VCR mode: 230 lines) of Horizontal Resolution. It exceeds Super VHS (400
lines) or Laser Disc (430 lines) in resolution.

VCR Section
• Stereo/SAP Reception - This VCR is designed to receive stereo and separate audio program (SAP) broadcasts where
available.
• 4 Video Heads - Provides optimal picture quality for special effects playback.
• 19µm HEAD - For superior picture quality even in SLP mode, 19micron width technology helps to avoid crosstalk and
boost SLP picture quality to near SP levels. With precision technology, ghosts and color beats are virtually eliminated.
• Hi-Fi Stereo Sound - With a frequency response of 20 to 20,000 Hz and a dynamic range of better than 90dB, this VCR
provides a level of excellence that rivals compact discs.
• One-touch Timer Recording (OTR) - Simply by pressing the REC/OTR button, the VCR can be programmed for up to 5
hours of recording with an immediate start.

DVD Section
• Compatible with a wide range of DVD audio outputs
Digital Audio Jack (Optical or Coaxial):
• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect of
being in a movie theater or a concert hall.
• DTS is a surround sound standard different from Dolby Digital. This format is already in use at many theaters. By
connecting this unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs
recorded in this format can be enjoyed. However, audio will not be output from the analog audio output jacks.
• The MPEG audio of DVD discs recorded in this format can be enjoyed.
• The Linear PCM sound of a 48 kHz/16 bit through 96 kHz/20 bit exceeds audio CD sound.
• Multi-Language - Since this DVD matches with 136 language-subtitles/-soundtracks, you can enjoy selecting a favorite
one. (You can not select the language that is not recorded on the disc.)
• Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc, you
can change the angles during playback. (If a Multi-Angle is not recorded on the disc, you can not change the angle.)
• Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.
• Memory/Random Playback - You can play back tracks, titles or chapters in programmed or random-selected sequences.
• Zoom - You can zoom in on the selected subject on the screen during playback.
• Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor/television on a suitable disc.
• Parental Control - You can limit the playback of scenes or sounds of adult DVD discs which have a parental level rating.

* This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
* Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the
rights of copyright owners and be contrary to copyright laws.

6
2A77001AE(06-11)

8/29/02, 10:48 AM

Before using your unit

Disc playback operation

IMPORTANT SAFEGUARDS .......................... 3
Power Source ................................................... 5
Features ........................................................... 6
Contents ........................................................... 7
Parts and functions .......................................... 8
Display ............................................................. 9
Remote control ............................................... 10
Basic connections .......................................... 12
CATV (CABLE TV) connections ..................... 14
Playback connection ...................................... 16

Disc ................................................................ 35
Setting setup language .................................. 36
Playback procedure ........................................ 37
Special playback ............................................ 38
Zooming ......................................................... 39
Repeat playback ............................................. 40
Memory playback/Random playback ............. 41
MP3 playback ................................................. 42
Changing soundtrack language ..................... 43
Changing subtitles language .......................... 43
Changing angles ............................................ 44
Title selection ................................................. 44
DVD menu ...................................................... 44

Setting up the VCR section
Setting the video channel ............................... 18
Setting the language ...................................... 18
Auto clock setting ........................................... 19
Manual clock setting ....................................... 21
Tuner setting ................................................... 22
To ADD/DELETE channels ............................ 23
Noise elimination ............................................ 23
Loading and Unloading a cassette tape ......... 24

Tape playback operation
Cassette tape playback .................................. 25
Special playback ............................................ 26
ZERO RETURN function ................................ 27
Video index search system ............................ 27

Recording
Recording a TV program ................................ 28
One-touch Timer Recording (OTR) ................ 30
Timer recording .............................................. 31

Advanced function of VCR section
Stereo recording and playback ...................... 33
Separate Audio Program (SAP) ..................... 33
Duplicating a video tape ................................. 34

Advanced function of DVD section
Parental control .............................................. 45
Setting menu language .................................. 47
Setting subtitle language ................................ 48
Setting audio soundtrack language ................ 49
Setting the aspect ratio of TV screen ............. 50
Setting on screen display ............................... 51
Setting Audio .................................................. 52
Setting Operation ........................................... 53
Setting Background ........................................ 54
Setting Screen Saver (DVD only) ................... 54
Setting initial setup ......................................... 55
Output sound conversion table ....................... 55
Status display of disc ..................................... 56
Table of languages ......................................... 57

Additional information
Problems and troubleshooting ....................... 58
Video head cleaning ....................................... 59
Specifications ................................................. 60

7
2A77001AE(06-11)

8/29/02, 10:48 AM

ENGLISH

Contents

Parts and functions
Front
VCR/DVD mode selector button

PLAY button

Cassette Loading Slot

OPEN/CLOSE button

STOP button
Disc tray

EJECT button

VCR

POWER

VIDEO IN

CHANNEL

DVD

VCR/DVD

DVD

L - AUDIO IN - R
VCR

Display window
Remote sensor

POWER
button

CHANNEL

AUDIO (L/R)/
VIDEO IN jacks

buttons

DVD indicator
REC button

REW (Rewind) button

VCR indicator

FF (Fast Forward) button

Rear

AC power cord

DVD OUTPUT
DIGITAL AUDIO
OPTICAL

COAXIAL

AUDIO

S-VIDEO COMPONENT

VIDEO

( ANT. )

PB/CB

L
AUDIO

OUT

PR/CR

RF IN jack

DVD OPTICAL
DIGITAL AUDIO
OUT jack (dust
protection cap)

( TV )

DVD COAXIAL DIGITAL
AUDIO OUT jack
DVD AUDIO (L/R) OUT jacks
DVD S-VIDEO OUT jack

RF OUT jack

CH.
4

3/4 Channel Selector Switch
DVD/VCR common AUDIO (L/R)/VIDEO OUT
jacks
DVD COMPONENT OUT jacks

8
2A77001AE(06-11)

8/29/02, 10:48 AM

Display
Display window
2

ENGLISH

5
6
10

No.
1

Display

7
Description

VCR mode

VCR

Playback (lights) / Auto resume (flashes)

Still picture

DVD

DVD disc is inserted.

CD is inserted.

Display for afternoon (not lit during morning hours)

10 : 00

Clock display (colon[ : ] flashes)

01 : 00

Counter display by hour/minute at VCR/DVD / by minute/second at CD

Track number display for CD

C002

TV channel display for VCR

C036

CATV channel display

External input display

Timer recording display

Video tape is in the unit

TRK

Track display for CD

REC

Normal recording display (flashes during One-touch Timer Recording - OTR)

Note:
Some discs may be displayed wrong or e.g. chapter number, playback time, etc. may not be displayed.

9
2A77001AE(06-11)

8/29/02, 10:48 AM

Remote control
Page
POWER
EJECT
OPEN/CLOSE
VCR/DVD
0-9

POWER

OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

/
TRACKING/SET –/+
/
SELECT/ENTER

CH
TRACKING/
SET
—

TRACKING/
SET

SELECT/
ENTER

CH
DVD MENU

DISPLAY/CALL
INPUT SELECT
CH /

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

DVD MENU
SET UP/VCR MENU
CLEAR/CANCEL
RETURN
ZOOM
TITLE
REPEAT A-B
AUDIO/AUDIO SELECT

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

TV/VCR

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

MEMORY
ZERO RETURN
ANGLE
COUNTER RESET
CLOCK/COUNTER
TIMER REC
SUB TITLE
ATR
PLAY MODE
SPEED
TV/VCR
REW/SEARCH
PLAY
F.FWD/SEARCH
SKIP /
INDEX /
STOP
REC/OTR
SLOW
PAUSE/STILL

Power on/off
18
Eject a cassette tape
24
Open or Close the tray
37
Switch to operate VCR or DVD
18,40
Direct channel selection of TV
23,28
Input setting
41
Enter a password
45
Display VCR or DVD operation status
29,56
Switch the connected TV to external mode
34
Select channel of the connected TV or VCR
28,30
Cursor buttons
36
Setting buttons
31,32
Manual tracking buttons in playback mode
26
Cursor buttons
18
Enter information in the menu
18
Select option in the menu
36
Select menu of a DVD disc
44
Display menu of setup
18,36,45-55
Delete Timer program
32
Cancel input data in the setting mode 21,31,39,41
Remove DVD set up menu
36
Zoom (for DVD playback)
39
Select title of a DVD disc
44
Repeat playback between A and B (DVD/CD) 40
Switches sound between mono, stereo and SAP 33
Change sound track language of DVD
43
Arrange the order of titles, chapters or tracks 41
Stop the tape when the counter reaches 00:00 27
Change playback angle of a DVD disc
44
Reset the counter to 00:00
27
Change the front Display mode
27
Set the unit to start recording at a preset time. 31,32
Set Subtitle of a DVD disc
43
Digital AUTO TRACKING
26
Select playback mode
40,41
Sets the tape speed for recording
28,30
Switches between TV and VCR
18,29
Rewind/Review playback
25,26,38
Playback
25,37
Fast Forward/Forward search playback 25,26,38
Skip chapter to forward or reverse direction
38
Search for the INDEX mark of a tape
27
Stop
25,37
Recording
28,30,34
Slowmotion playback
26,38
Still picture/Recording pause on/off 26,29,34,38

10
2A77001AE(06-11)

8/29/02, 10:48 AM

Remote control

Open the battery
compartment cover in the
direction of the arrow.

two "AAA" batteries (not
2 Install
supplied), paying attention to the

Replace the compartment
cover.

polarity diagram in the battery
compartment.

Battery precautions
The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)

Remote control basics
•
•
•
•
•
•

Press POWER to turn the DVD/VCR on or off.
Make sure VCR/DVD switch is set to VCR/DVD.
Tap CH or CH to move through the channels one channel at a time.
The CH / and SET +/– are also used to navigate on-screen menu system.
You can directly access specific channels using Number keys pad.
Each press of VCR/DVD on the remote control, switches the screen between the VCR screen (VCR mode)
and the DVD screen (DVD mode).

Operation
• Aim the remote control at the remote sensor and press control buttons
to operate.
• Operate the remote control within 30° angle on either side of the remote
sensor, up to a distance of Approx. 5 meters.

Approx. 5 meters

11
2A77001AE(06-11)

8/29/02, 10:48 AM

ENGLISH

Inserting Batteries

Basic connections
If you are using an antenna system, follow these instructions. If you are a cable (CATV) subscriber,skip
ahead to page 14 for the proper connections.

ANTENNA TO DVD/VCR CONNECTION
The DVD/VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV
and connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting
an antenna system to a DVD/VCR. Find the type of antenna system you are using and follow the connection
diagram.

Combination VHF/UHF Antenna with 75 ohm Coaxial Cable
DVD/VCR

IN
(ANT.)

75 ohm Coaxial Cable
OUT
(TV)

Combination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) Wire
DVD/VCR

Matching Transformer
300 ohm Input
75 ohm output
(not supplied)

IN
(ANT.)

OUT
(TV)

300 ohm Twin Lead (Flat) Wire

DVD/VCR

Separate VHF and UHF Antennas
Combiner
75/300 ohm Inputs
75 ohm output
(not supplied)

UHF

VHF

IN
(ANT.)

300 ohm Twin Lead (Flat) Wire

OUT
(TV)

75 ohm Coaxial Cable
NOTE: If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300
ohm inputs and one 75 ohm output.
NOTES: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the
antenna to the DVD/VCR properly.
• For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of
an outdoor type antenna is required.
• If you are not sure about the connection, please refer to qualified service personnel.

2A77001AE(12-15)

8/29/02, 11:03 AM

Basic connections
After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.
Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow
the connection diagram.
This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.

VHF/UHF IN

NOTE: If a VHF or UHF antenna is
used, set the TV/CATV
menu option to the "TV"
mode.

75 ohm Coaxial Cable (supplied)
TV with single 75 ohm VHF/UHF
antenna input

75 ohm Coaxial Cable
(supplied)

Splitter
75 ohm Input
75/300 ohm outputs
(not supplied)

UHF

VHF

NOTE: If a VHF or UHF antenna is
used, set the TV/CATV
menu option to the "TV"
mode.
TV with 300 ohm UHF and 75 ohm VHF
antenna inputs

TV
UHF

75 ohm Coaxial Cable
(supplied)

Splitter
75 ohm Input
300 ohm outputs
(not supplied)

NOTE: If a VHF or UHF antenna is
used, set the TV/CATV
menu option to the "TV"
mode.

VHF

TV with 300 ohm UHF and 300 ohm VHF
antenna inputs

13
2A77001AE(12-15)

8/29/02, 11:03 AM

ENGLISH

DVD/VCR TO TV CONNECTION

CATV (CABLE TV) connections
Many cable companies offer services permitting reception of extra channels including pay or subscription channels.
This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable
company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to
a special channel which is scrambled, you must have a descrambler box for proper reception.

DVD/VCR
TV
IN
(ANT.)

VHF/UHF
IN (ANT)

Incoming Cable
OUT
(TV)

ALLOWS: * Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording of one channel while watching another.

DVD/VCR
Converter/
Descrambler

TV
IN
(ANT.)

Incoming
Cable

VHF/UHF
IN (ANT)

OUT
(TV)

ALLOWS: * Recording of channels through the converter box
(scrambled and unscrambled).
* Using the programmable timer to record only the
channel selected at the converter box.
PREVENTS: * Recording one channel while watching another.
* Using the DVD/VCR tuner to select channels.

NOTE:
To record from converter/descrambler,
DVD/VCR tuner must be tuned to the
converter output channel, usually
channel 3 or 4.

DVD/VCR
TV
IN
(ANT.)

Incoming Cable

Converter/Descrambler

VHF/UHF
IN (ANT)

OUT
(TV)

ALLOWS: * Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording an unscrambled channel while watching
any channel selected at the converter box.
PREVENTS: Recording scrambled channels.

NOTE:
If you are playing a tape or using the
tuner built into the DVD/VCR, the
converter must be set to the video
channel output of the DVD/VCR (either
3 or 4).

NOTE: Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR
to the output of the Converter/Descrambler box, usually channel 3 or 4.

14
2A77001AE(12-15)

8/29/02, 11:03 AM

CATV (CABLE TV) connections
This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled
programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult
your local cable company for more information concerning connection to their descrambler equipment. There are many
ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.

DVD/VCR
TV

Splitter
A/B Switch

Incoming
Cable

ALLOWS: *
*
*
PREVENTS: *
*

IN
(ANT.)

VHF/UHF
IN (ANT)

Converter/Descrambler

OUT
(TV)

Recording of one channel while watching another.
Using the programmable timer to record only the channel selected at the converter box.
Recording of all channels through the converter box.
Watching scrambled channels while recording another channel.
Using the DVD/VCR tuner to select channels.
DVD/VCR
TV

Splitter
IN
(ANT.)

Converter/
Descrambler

Incoming
Cable

OUT
(TV)

A/B Switch

VHF/UHF
IN (ANT)

A
B

ALLOWS: *
*
*
*
PREVENTS:

Recording of nonscrambled channels.
Recording of one channel while watching another.
Watching premium channels through the converter while recording nonscrambled channels.
Using the programmable timer.
Recording scrambled channels.

DVD/VCR
Splitter

Converter/
Descrambler

TV
IN
(ANT.)

Incoming
Cable

Converter/
Descrambler

OUT
(TV)

VHF/UHF
IN (ANT)

A/B Switch
A
B

ALLOWS: * Recording of all channels through the converter box.
* Recording a scrambled or unscrambled channel while watching another (scrambled or
unscrambled) channel.
* Using the programmable timer to record only the channel selected at the converter box.
PREVENTS: Using the DVD/VCR tuner to select channels.

15
2A77001AE(12-15)

8/29/02, 11:03 AM

ENGLISH

IMPORTANT: Make sure the TV/CATV menu option is set to the "CATV" mode.

Playback connection
The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for the
location of video and audio inputs and outputs.

Connect to a TV with Audio/Video Output
Use the supplied AUDIO/VIDEO Cord.
TV
Audio (L) Output Video Output
DVD/VCR

DVD OUTPUT
DIGITAL AUDIO
OPTICAL

AUDIO

COAXIAL

S-VIDEO COMPONENT

VIDEO

PB/CB

L
AUDIO

PR/CR

( ANT. )

OUT
( TV )

CH.
3

To Video
Input

Audio (R) Output

To Audio (R) Input
To Audio (L) Input

AUDIO/VIDEO Cord (supplied)

Connect to a BS TUNER
VHF/UHF
Antenna
Satellite
Antenna

75 ohm Coaxial Cable (not supplied)

To ANT. Input

DVD/VCR

ANT. Input
BS Tuner

DVD OUTPUT
DIGITAL AUDIO
OPTICAL

COAXIAL

AUDIO

S-VIDEO COMPONENT

VIDEO

PB/CB

L
AUDIO

PR/CR

( ANT. )

OUT
( TV )

CH.
3

ANT.
Output

Video Output

ANT. output

75 ohm Coaxial
Cable (supplied)

Audio (L) Output

To ANT.
Input

Audio (R) Output
AUDIO/VIDEO Cord (supplied)

Connect to a TV with S-Video Output
TV
S-Video Cord (not supplied)
DVD/VCR

DVD OUTPUT
DIGITAL AUDIO
OPTICAL

COAXIAL

AUDIO
L

S-VIDEO COMPONENT
Y

VIDEO

PB/CB

L
AUDIO

PR/CR

( ANT. )

OUT
( TV )

CH.
3

S-Video Output

To S-Video Input

Audio (L) Output
Audio (R) Output

To Audio (R) Input
To Audio (L) Input

AUDIO Cord (not supplied)

16
2A77001AE(16-21)

8/29/02, 11:02 AM

Playback connection
If your TV has a COMPONENT VIDEO IN jack, you can connect the DVD/VCR to the TV with a COMPONENT
cable (not supplied) as shown below. COMPONENT VIDEO output jack can send higher quality video signal to a
TV than S-Video output.
COMPONENT VIDEO Cord (not supplied)

To Component
Video Output

AUDIO/VIDEO Cord (supplied)

To
Component
Video Input

To Audio/Video Input

To Audio/Video Output

DVD/VCR

Stereo Amplifier
DVD OUTPUT
DIGITAL AUDIO
OPTICAL

AUDIO

COAXIAL

S-VIDEO COMPONENT

VIDEO

PB/CB

L
AUDIO

PR/CR

( ANT. )

OUT
( TV )

CH.
3

Audio (L) Output
Audio (R) Output

To Audio (L) Input
To Audio (R) Input

AUDIO Cord (not supplied)

Connect to an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems
such as Dolby Digital and DTS by using the Optical or Coaxial Digital Output.
Use this connection to connect an:
• AV amplifier with built-in *Dolby Digital decoder
• AV amplifier with built-in *DTS decoder
Video cord (not supplied)

To Video
Input

DVD/VCR
Video Output
TV

DVD OUTPUT
DIGITAL AUDIO
OPTICAL

COAXIAL

AUDIO
L

S-VIDEO COMPONENT
Y

VIDEO

PB/CB

L
AUDIO

PR/CR

( ANT. )

OUT
( TV )

CH.
3

Coaxial digital
Audio Output

Coaxial digital cable
(not supplied)

AV Amplifier with
built-in various
decoder as above

NOTE:
You may connect to a TV with a
Component video cable(not supplied) or
S-Video cable(not supplied) instead of
a video cable(not supplied).

Connecting the optical digital cable
You may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital
cable.
When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel.
When not using the optical digital cable, attach the dust protection cap to protect against dust.
NOTES:
• The OPTICAL, COAXIAL, DVD AUDIO L/R, S-VIDEO and COMPONENT jacks are useful only for DVD section.
On these connections, VCR functions can not be used and also the VCR MENUs don’t appear.
VHS signal is output only from the composite jack (DVD/VCR VIDEO/AUDIO OUTPUT) and UHF/VHF OUT.
• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV
Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the
speakers to be damaged.
• Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital input
connector) which does not contain a Dolby Digital or DTS decoder. Otherwise, any attempt to play DVDs may
cause such a high level of noise that it may be harmful to your ears and damage your speakers.
• DTS audio will be output only from the COAXIAL or OPTICAL output. To hear DTS audio, DTS-Decoder is
necessary.
When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.
• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.

2A77001AE(16-21)

8/29/02, 11:02 AM

ENGLISH

Connect to a Stereo Amplifier with Audio Output

Setting the video channel / Setting the language
Setting the video channel

When a TV is connected with the 75 ohm coaxial cable only.

To view playback of a recorded tape
or DVD disk, or to watch a program
selected by the VCR's channel
selector, the TV must be set to
channel 3 or 4 (video channel).

1 Press POWER to turn on the DVD/VCR.
VCR/DVD to select the VCR mode. The VCR indicator
2 Press
on the front panel will light.

POWER

OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

4 seconds.

CH
TRACKING/
SET
—

TRACKING/
SET

SELECT/
ENTER

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

the 3/4 Channel selector switch on the rear panel to CH
3 Set
3 or 4.
ON the TV and set to CH 3 or 4 to correspond with the
4 Turn
channel selected in step 3.
TV/VCR to select the VCR position.
5 Press
The VCR indicator will appear in the display.
any channel to receive a TV station in your area.
6 Select
The channel number will appear on the screen for about

PLAY MODE/
SPEED

PLAY

TV/VCR

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned
on your TV, proceed as follows: set the VCR 3/4 channel selector
and the TV to CH 3 or 4, play back a prerecorded tape and tune
the TV to receive a sharp color picture from the video cassette
recorder. Refer to your TV owner's manual for details.

Setting the language
You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
VCR MENU,
1 IfPress
you use the unit for the first time
and press VCR MENU, instead of
the main menu screen on the right
the “SYSTEM SET UP” menu
screen in step 2 may appear.

OFF
OFF

〈+/-/ENTER/MENU〉

PAUSE/STILL

or
to select the
2 Press
“LANGUAGE” option, then press
NOTES:
• If the unit does not operate
properly, or if it does not respond
to commands via the unit and/or
the remote control: Static electricity, etc., may affect the player's operation. Disconnect the AC power cord
once, then connect it again.
• Both the VCR and the DVD have their
own menu option (See page 36).
• If no buttons are pressed for more
than 60 seconds, the MENU screen
will return to normal TV-operation
automatically.

ENTER.

SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/-/ENTER/MENUñ

or
to select the desired
3 Press
language: English (ENGLISH),
Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.

4 Press VCR MENU until the MENU screen is cleared.

18
2A77001AE(16-21)

MENU
TIMER REC SET
AUTO REPEAT ON
ON
SAP
CH SET UP
SYSTEM SET UP

8/29/02, 11:02 AM

The Auto Clock feature enables automatic clock setting and updating, and also automates Time Zone
and Daylight Saving Time settings by receiving XDS (Extended Data Service) information carried on the
channel signal.
Preparation:
You must set the antenna connection before the AC cord plug is
inserted into the AC outlet.

POWER

Auto clock setting

OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

CH
TRACKING/
SET
Ð

TRACKING/
SET

SELECT/
ENTER

After you set the antenna connection and plug the AC cord into an AC
outlet (in that order), you must WAIT 30 MINUTES before turning the
power switch to the on position to prevent interference with the Auto
Clock activation function.
After the clock is set automatically, you may have to set the Time
Zone and Daylight Saving Time.
Press POWER to turn on the DVD/VCR after the Auto Clock operation
is completed.
• When shipped from factory, the AUTO CLOCK option is set to ON position.
• If you turn the DVD/VCR on during Auto Clock setting, the clock is not set.
• With cable box connection, if the Auto Clock Setting is unsuccessful,
please select the PBS channel carrying the XDS information, then
turn the DVD/VCR off. After 30 minutes, turn the DVD/VCR on, and if
the clock is not set automatically, set the clock manually. (See page 21)

Time Zone setting (STANDARD TIME)
In the rare event that you live within broadcast range of two stations
in two different time zones, the DVD/VCR may recognize the
wrong station for the AUTO CLOCK set. To correct the situation:

CH
SET UP/

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

DVD MENU VCR MENU

Preparation:

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER
TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

TV/VCR

PLAY

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

• Turn ON the TV.
• When a TV is connected with an audio/video cable, select the video
input mode on the TV.
• When a TV is connected only with an antenna cable, set to the
video channel 3 or 4. Then select VCR position with TV/VCR.
• Press VCR/DVD to select the VCR mode. (The VCR indicator will
light.)

Press VCR MENU. The VCR menu screen will appear.
1 Press
or
to select the SYSTEM SET UP menu, then
press ENTER.
or
to select the
2 Press
“STANDARD TIME” option, then
press ENTER.

SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK
ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/Ð/ENTER/MENUñ

Press
or
to select your Time
3 Zone,
then press the ENTER.
NOTE:
• After performing the Auto Clock
setting, in some cases the clock may
display an incorrect time zone. You can
correct the clock by selecting your
Time Zone setting per the instructions
above.
• When the clock is not set or you set
the clock manually, Time Zone setting
is not available.

STANDARD TIME
ATLANTIC
CENTRAL
PACIFIC
HAWAII
AUTO

EASTERN
MOUNTAIN
ALASKA

+/Ð/ENTER/MENUñ

4 Press VCR MENU until the MENU screen is cleared.
19

2A77001AE(16-21)

8/29/02, 11:02 AM

ENGLISH

Auto clock setting

Auto clock setting
Daylight saving time setting
You can set the Daylight saving
time automatically or manually.

POWER

OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

Preparation:
• Turn ON the TV.
• When a TV is connected with an audio/video cable, select the
video input mode on the TV.
• When a TV is connected only with an antenna cable, set to the
video channel 3 or 4. Then select VCR position with TV/VCR.
• Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)

the step 1 on page 19 and
1 Repeat
press
or
to select DAYLIGHT
SAVING TIME, then press ENTER.

+/-/ENTER/MENUñ

CH
TRACKING/
SET
Ð

TRACKING/
SET

SELECT/
ENTER

CLEAR/
CANCEL

RETURN

TITLE

REPEAT A-B

ZOOM

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER
TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

or
to select one of
2 Press
the options, then press ENTER.
for manual setting
(forward one hour)
OFF: for manual setting
(back one hour)
AUTO: for automatic setting
(read XDS in the signal)

PLAY MODE/
SPEED

ON
OFF

TV/VCR

PLAY

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

AUTO
+/Ð/ENTER/MENUñ

When you want to set the Daylight Saving Time manually, on
the first Sunday in April you set to “ON”, and on the last
Sunday in October you set to “OFF”.

NOTES:
• When shipped from factory, the DAYLIGHT SAVING TIME
option is set to “AUTO” position.
• When the clock is not set, Daylight Saving Time setting is not
available.
• When there is no Daylight Saving Time in your area, always
select “OFF” position in step 2.

20
2A77001AE(16-21)

DAYLIGHT SAVING TIME

ON:

CH
SET UP/
DVD MENU VCR MENU

SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK
ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME

8/29/02, 11:02 AM

You must set the date and time for
timer recordings.

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)

EXAMPLE: Setting the clock to "8:30 AM" March, 23 (SAT), 2002.
POWER

OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

MENU
TIMER REC SET
AUTO REPEAT ON
ON
SAP
CH SET UP
SYSTEM SET UP

press ENTER.

1 Press VCR MENU. The VCR menu screen will appear.
or
to select the
2 Press
“SYSTEM SET UP” menu, then

〈+/-/ENTER/MENU〉

TRACKING/
SET
Ð

TRACKING/
SET

SELECT/
ENTER

or
to select the
3 Press
“CLOCK SET” option, then press
ENTER.

CH
SET UP/

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

DVD MENU VCR MENU

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/-/ENTER/MENUñ

or
to set the month,
4 Press
then press ENTER.

MONTH
DAY

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

OFF
OFF

SUB TITLE/
ATR

PLAY MODE/
SPEED

TV/VCR

PLAY

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

3
1 (WED)

YEAR

2000

TIME

12 : 00AM

〈+/-/ENTER/CANCEL/MENU〉

To make corrections any time during the process
Press CANCEL repeatedly until the item you want to change
blinks, then press
or
.
the day, year and time as in
5 Set
step 4.

MONTH

DAY

23 (SAT)

YEAR

2002

TIME

8 : 30AM

〈+/-/ENTER/CANCEL/MENU〉

NOTE:
After a power failure or disconnection
of the power, the timer settings will be
lost. In this case, reset the present time.

setting the clock, date and
6 After
time starts functioning

8 : 30AM SAT

automatically.

21
2A77001AE(16-21)

8/29/02, 11:02 AM

ENGLISH

Manual clock setting

Tuner setting
This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to
the next channel set into memory, skipping over unwanted channels. Before selecting channels, they
must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/
VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV
menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.

POWER

OPEN/
CLOSE

EJECT

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)

VCR/DVD

DISPLAY/CALL

INPUT SELECT

The VCR menu screen will appear. Press
1 Pressor VCRto MENU.
select “CH SET UP”, then press ENTER.

CH
TRACKING/
SET
—

TV/CATV selection

TRACKING/
SET

or
2 Press
CATV” option.

to select the “TV/

CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE

SELECT/
ENTER
〈+/—/ENTER/MENU〉

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE

indicates the selected mode.
TV
- VHF/UHF channels
CATV - CABLE TV channels

〈+/—/ENTER/MENU〉

TV/VCR

SEARCH/F.FWD

STOP

press ENTER to select the
3 Then
TV or CATV mode. The arrow

4 Press VCR MENU until the menu screen is cleared.

SKIP/INDEX

SLOW

PAUSE/STILL

Setting channels automatically
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
above step 1 and press
1 Repeat
or
to select “AUTO CH
MEMORY”.

CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE

〈+/-/ENTER/MENU〉

NOTE:
You can’t select “CH SET UP” if you
set the channel to “L”.

press ENTER.
2 Then
The auto tuning will start. The
channel display will count up and
when finished, the screen returns
to normal.

22
2A77001AE(22-27)

8/29/02, 11:01 AM

CH 002

To ADD/DELETE channels / Noise elimination
You can add the channels you want
or delete the channels you do not
want manually.

POWER

OPEN/
CLOSE

EJECT

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)

the step 1 on page 22.
1 Repeat
Then press
or
to select the

VCR/DVD

DISPLAY/CALL

INPUT SELECT

TV CATV
AUTO CH MEMORY
ADD/DELETE

“ADD/DELETE” option and press
ENTER.

〈+/-/ENTER/MENU〉

1
TRACKING/
SET

Press Number keys or /
to select a channel number
you want to add or delete.

ADD

CH 003

SELECT/
ENTER

CH
DVD MENU

CH SET UP

2 To Add or Delete desired channels

CH
TRACKING/
SET
—

ENGLISH

To ADD/DELETE channels

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

To add channels
Press ENTER until “ADD”
appears on the screen to set
to add the unmemorized
channel.

〈+/-/0-9/ENTER/MENU〉

To delete channels
Press ENTER until “DELETE” appears on the screen to
set to delete the channel from memory. The channel
number will blink.

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

3
TIMER REC

REW/SEARCH

INDEX/SKIP

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

SEARCH/F.FWD

STOP

Repeat 1 to 2 to add or delete other channel.

TV/VCR

3 Press VCR MENU until the menu screen is cleared.

SKIP/INDEX

Noise elimination
REC/OTR

SLOW

PAUSE/STILL

When you don't want to receive a weak signal broadcast, the
Blue back screen can be obtained by selecting the NO NOISE
BACKGROUND "ON". When the unit is shipped from the
factory, the NO NOISE BACKGROUND is set to the "ON".
the steps 1~2 on page 21 and press
1 Repeat
“ NO NOISE BACKGROUND” .
Press ENTER to select the “ON”
2 position.

to select

SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/-/ENTER/MENUñ

3 Press VCR MENU until the menu screen is cleared.
23
2A77001AE(22-27)

8/29/02, 11:01 AM

Loading and Unloading a cassette tape
Use only video cassette tapes marked

Loading
Push the center of the tape until it is automatically
inserted.

Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left.
An inverted cassette tape cannot be inserted.

VCR

Erase prevention tab
Automatic power ON
When you insert a cassette tape the VCR power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.

Unloading

Press EJECT on the unit or the Remote.

Remove the cassette tape.

Automatic tape eject
This VCR will automatically rewind the tape when the tape has ended. When the tape is rewound to its
beginning, the cassette tape will be ejected automatically.

To prevent accidental erasure

To record again

Remove the erase prevention tab with a screwdriver.

Cover the hole with a piece of adhesive tape.

Screwdriver

Erase prevention tab

Adhesive tape

Tape speed and maximum recording time
Tape Speed

Video cassette tape
T-160

T-120

T-90

T-60

T-30

SP (Standard Play)

2-2/3 hours

2 hours

1-1/2 hours

1 hour

30 minutes

SLP (Super Long Play)

8 hours

6 hours

4-1/2 hours

3 hours

1-1/2 hours

24
2A77001AE(22-27)

8/29/02, 11:01 AM

Cassette tape playback

POWER

OPEN/
CLOSE

EJECT

a prerecorded tape
1 Load
(When loading a cassette tape

VCR/DVD

DISPLAY/CALL

INPUT SELECT

without the erase prevention
tab, playback will start automatically).
start playback
2 To
Press PLAY.

CH
TRACKING/
SET
—

ENGLISH

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)

TRACKING/
SET

Playback will start.
" will appear on the screen
"
for about 4 seconds.

SELECT/
ENTER

To stop playback

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

Press STOP once.
The tape will stop but remain
fully loaded and ready to play.
" " will appear on the screen
for about 4 seconds.

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

TV/VCR

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

To rewind the tape or forward it rapidly
Stop the playback or recording with STOP.
To rewind the tape:

To forward the tape:

Press REW.

Press F.FWD.

PAUSE/STILL

To stop the tape-winding, press STOP. To switch to playback
directly (without STOP), press PLAY.
NOTES:
• This VCR selects the playback tape
speed SP, LP or SLP automatically.
• The Cassette tape and DVD disc can
be played back simultaneously. If you
press VCR/DVD, the tape playback
and DVD playback alternate with each
other on the screen.
• When you select the VCR mode during
DVD playback, DVD playback will stop
automatically after approx. 5 minutes.

2A77001AE(22-27)

Forward/Reverse picture search mode
When the tape is being wound, you can switch to picture search
mode (see next page). To do this, press REW or F.FWD and hold
it down. The unit will resume the tape winding as soon as the
button is released.

25
8/29/02, 11:01 AM

Special playback
Picture Search

Repeat playback

Reverse picture search function
Press REW x 1 or x 2 during the playback.
Forward picture search function
Press F.FWD x 1 or x 2 during the playback.
To return to playback: Press PLAY.

The entire video tape will be played until its end. The
tape will then automatically rewind to the beginning and
the playback will be repeated.

SPEED SEARCH TIMES
TAPE SPEED

PICTURE SEARCH SPEED
PRESS ONCE PRESS TWICE

SP (Standard Play)

LP (Long Play)

SLP (Super Long Play)

15 X

SETUP MENU. Press
1 Press
AUTO REPEAT.
Then press ENTER to
2 select
[ON] or [OFF].

to select

MENU
TIMER REC SET
AUTO REPEAT ON
ON
SAP
CH SET UP
SYSTEM SET UP

If [ON] is selected, the
playback will be
repeated endlessly.

OFF
OFF

〈+/-/ENTER/MENU〉

Still Picture
Press PAUSE during playback. To resume normal
playback: Press PLAY.

Slow Motion

Press VCR MENU until the menu screen is
3 cleared.
if you press CALL, "

During playback press SLOW.
To return to playback: Press PLAY or SLOW.
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the TRACKING + or – to reduce the noise bars.
If the still picture jitters excessively, press TRACKING
+ or – to stabilize the still picture.

Frame by Frame picture

" will appear on the screen.

the playback, press PLAY.
4 ToThestart
playback will be repeated endlessly.
To cancel repeat mode:
Follow the above step 1, then press ENTER to select
the OFF position. Press VCR MENU to return to the
TV.

Press PAUSE during playback.
Press SLOW repeatedly. The picture advances frame
by frame.
To return to playback: Press PLAY or PAUSE.

Adjusting tracking condition
Automatic tracking adjustment
Whenever you insert a tape and start playback,
automatic tracking starts working and continuously
analyzes the signal to enable optimum picture quality
during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises sufficiently
during playback, press TRACKING +/– to eliminate the
noises.
“MANUAL TR.” will appear. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.
• Press ATR to reactivate automatic tracking again.
“AUTO TR.” will appear.
NOTES:
• The audio output is muted during SPEED SEARCH,
STILL, FRAME ADVANCE and SLOW MOTION.
• During picture search mode there will be noise bars
which are caused by the system.
• The Special Playback will automatically change to
playback after approx. 5 minutes to protect the video
tape against excessive wear.

26
2A77001AE(22-27)

8/29/02, 11:01 AM

ZERO RETURN function
This function makes tape-rewinding
stop at the counter 00:00:00 position
automatically.
1

DISPLAY/CALL

INPUT SELECT

Preparation:
• Turn ON the TV and set it to the video input mode.
• Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)
CALL.
1 Press
The counter display shows the tape

8 : 47AM MON
STEREO SAP

TRACKING/
SET
—

00 : 04 : 38 SP

VCR

CH
TRACKING/
SET

SELECT/
ENTER

COUNTER RESET at the desired
2 Press
tape position. The counter display will be
reset to the "00:00:00" position (e.g. the
begining of recording).

8 : 47AM MON
STEREO SAP

VCR

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

SUB TITLE/
ATR

CH 001

running time during playback or
recording.

PLAY MODE/
SPEED

PLAY

TV/VCR

CH 001

00 : 00 : 00 SP

STOP when playback or recording is finished.
3 Press
Press ZERO RETURN.
The tape will be rewinded or fast forwarded and automatically
stop at the ”00:00:00” position.

The CLOCK/COUNTER-button
Press CLOCK/COUNTER. The clock and tape
counter alternate with each other in the display.

VCR

SEARCH/F.FWD

VCR

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

NOTES for Counter Display:
• If you rewind the tape beyond
“00:00:00”, a minus sign (“–”) will be
displayed in front of the time.
• When you load a tape, the counter will
reset to “00:00:00”.
• The counter does not function on
nonrecorded (blank) sections of the
tape. When you rewind, fast forward or
play tapes through blank sections, the
counter stops.
NOTES for Video index search system:
• When you record an INDEX mark at
the very beginning of the tape, the
mark may not be found.
• During INDEX search, the tape may
stop and begin to play at a slightly
different location.
• INDEX may not function properly with
old or worn out video tapes.
• INDEX marks may not be found if it is
extremely close to the point where the
search began.
• In recording, if you stop recording
temporarily, the INDEX mark is not
recorded on the tape.

2A77001AE(22-27)

Video index search system
This function enables you to locate the beginning of any
recording made on the VCR.
Recording an INDEX MARK
The Index Search function automatically
records an INDEX mark on the tape
whenever a recording is initiated.

CH 001

INDEX

Index Search
Press INDEX
or
during stop or play
+3
mode.
For Succeeding programs: Press INDEX
.
For Preceding programs: Press INDEX
.
(Additional press increases the INDEX NO.
up to 9.)
When the INDEX
or
is pressed, the
or
is displayed
unit starts searching the INDEX NO.
selected and finds the portion, then playback
INDEX NO. (up to 9)
starts automatically.
To stop the Index Search, press STOP.

27
8/29/02, 11:01 AM

ENGLISH

ZERO RETURN function / Video index search system

Recording a TV program
Recording and viewing the
same TV program

POWER

OPEN/
CLOSE

EJECT

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)

VCR/DVD

DISPLAY/CALL

a cassette tape with the erase
1 Load
prevention tab intact.
The VCR will automatically turn on.

INPUT SELECT

0
Press SPEED to select the desired tape
2 speed
SP or SLP.

CH
TRACKING/
SET
—

TRACKING/
SET

SELECT/
ENTER

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

00 : 00 : 00 SP

the TV/CATV option to the appropriate position (See page
3 Set
22).

CH
DVD MENU

The tape counter and SP or SLP will
appear on the screen for about 4
seconds.

PLAY MODE/
SPEED

PLAY

TV/VCR

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

TV
- VHF/UHF channels
CATV - CABLE TV channels
Number keys or CH
4 Press
recorded.

to select the channel to be

1-9

Press 0 twice and then 1-9 as required. Example: To
select 2, Press “002”.
10-12
Press 0 first and then the remaining 2 digits in order
from left to right.
Example: Press 012 for “12”.
CH 110
13-99
Press 2 digits in order.
Example: Press 22 for “22”.
100-125 Press the 3 digits in order.
Example: Press 110 for “110”.

VHF/UHF/CATV CHANNELS
TV
VHF
2-13
UHF
14-69

NOTES:
• If the erase prevention tab is removed,
the tape will eject when REC/OTR is
pressed for recording.
• If you wish to watch the DVD playback
during the normal recording on VCR,
press VCR/DVD to change to DVD
mode and perform the DVD playback
(see page 37).
• You can not record disc material in
DVD, Video CD, Audio CD, etc. onto a
video tape with this DVD/VCR.

CATV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100)(125)
01 (5A)

REC/OTR.
5 Press
" " will appear on the screen for

INDEX

28
2A77001AE(28-33)

CH 110

about 4 seconds and “REC” will
appear on the display.

8/29/02, 11:00 AM

Recording a TV program
To stop recording

POWER

OPEN/
CLOSE

EJECT

To stop recording temporarily

VCR/DVD

DISPLAY/CALL

INPUT SELECT

TRACKING/
SET

SELECT/
ENTER

Recording one program while watching another

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

Press PAUSE/STILL to avoid recording
unwanted material. Press again to continue
the recording.
"
" will appear on screen for about 4
seconds.
NOTES:
• The pause function will be released after 5 minutes to prevent damage
to the tape or the VCR. The VCR will change to the STOP mode.
• You can select a recording channel in the recording pause mode.

CH
TRACKING/
SET
—

ENGLISH

Press STOP to stop recording.
" " will appear on screen for about 4
seconds.

SUB TITLE/
ATR

PLAY MODE/
SPEED

While the VCR is recording, press TV/VCR to select the TV position.
The “VCR” will go off and recording will continue.
Select the TV channel you want to watch by using the TV channel
selector.
NOTE:
Some CATV hookups do not permit viewing one channel while
recording another. See pages 14,15.

TV/VCR

To Display VCR operation Status
REW/SEARCH

INDEX/SKIP

PLAY

SEARCH/F.FWD

STOP

Press CALL. The clock, day of the week and more information will be
indicated.

SKIP/INDEX

While watching TV
DAY OF THE WEEK
REC/OTR

SLOW

PAUSE/STILL

CLOCK

8 : 47AM MON
STEREO SAP

CH 125

CHANNEL

STEREO AND
SEPARATE AUDIO
PROGRAM (SAP)
00 : 00 : 00 SP

TAPE SPEED

REAL TIME COUNTER

While operating a tape

Auto Rewind feature
This VCR will automatically rewind the
tape when the tape has ended (except
during OTR and TIMER REC). It will
also eject the tape.

HI-FI STEREO
AUTO REPEAT

8 : 30AM MON
HI-FI

CH 125

00 : 15 : 12 SP

OPERATING
MODE

TAPE IN

To cancel the display: Press CALL until all indicators disappear.

29
2A77001AE(28-33)

8/29/02, 11:00 AM

One-touch Timer Recording (OTR)
The One-touch Timer Recording
feature provides a simple and
convenient way to make a timed
recording.

POWER

OPEN/
CLOSE

EJECT

Example: One-touch Timer Recording for 30 minutes.

VCR/DVD

DISPLAY/CALL

INPUT SELECT

TRACKING/
SET
—

TRACKING/
SET

SELECT/
ENTER

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

The VCR will automatically turn on.

PLAY MODE/
SPEED

PLAY

The tape counter and SP or SLP will
appear on the screen for about 4
seconds.

TV
- VHF/UHF channels
CATV - CABLE TV channels
Number keys or CH / to
4 Press
select the channel to be recorded.

CH 110

TV/VCR

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

NOTE:
If you wish to watch the DVD playback
during the OTR, press DVD/VCR to
change to DVD mode and perform the
DVD playback (see page 37).

REC/OTR. Press the button again to stop recording after
5 Press
30 minutes. Each additional press of REC/OTR will increase
recording time as shown in the chart below, up to a maximum of
5 hours. The OTR and recording time will appear on the screen
for about 4 seconds. And, REC will keep blinking in the display.

Press Recording time
NORMAL REC
once
0:30
twice
1:00
3 times
1:30
4 times
2:00
5 times

Press Recording time
3:00
6 times
4:00
7 times
5:00
8 times
9 times NORMAL REC

To cancel OTR
Press STOP or turn off the power.
" " will appear on screen for about 4
seconds.

30
2A77001AE(28-33)

00 : 00 : 00 SP

the TV/CATV option to the appropriate position (See page
3 Set
22).

TIMER REC

a cassette tape with the erase
1 Load
prevention tab intact.

Press SPEED to select the desired tape
2 speed
SP or SLP.

DVD MENU

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)

8/29/02, 11:00 AM

OTR 0 : 30
CH 125

INDEX

Timer recording can be programmed
on-screen with the remote control.
The built-in timer allows automatic
unattended recording of up to 8
programs within 1 month.

POWER

OPEN/
CLOSE

EJECT

Preparation:
• Press VCR/DVD to select the VCR mode.
Load a cassette tape with the erase prevention tab intact.
• Press the CALL button to verify that the time and date are
correct (see page 29).
Example: Program a timer recording for the 26th day, channel 125
(CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: SLP).

VCR/DVD

DISPLAY/CALL

INPUT SELECT

Press VCR MENU. Select the
1 “TIMER
REC SET” option , then
press ENTER.

MENU
TIMER REC SET
AUTO REPEAT ON
ON
SAP
CH SET UP
SYSTEM SET UP

OFF
OFF

〈+/—/ENTER/MENU〉
TRACKING/
SET
—

TRACKING/
SET

SET + or – to select one of the
2 Press
program line, then press ENTER.

SELECT/
ENTER

DATE

START END

—

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

〈+/—/ENTER/CANCEL/MENU〉

SET + or – to select the date,
3 Press
then press ENTER.

DATE

START END

26(SU)

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

SUB TITLE/
ATR

PLAY MODE/
SPEED

〈+/—/ENTER/CANCEL/MENU〉

TV/VCR

the start time, end time, channel
4 Set
and tape speed as in step 3.
NOTES:
• If the clock symbol( ) blinks when the
timer recording ended, the TV program
has not been completely recorded
because of an insufficient tape supply.
Press TIMER REC to cancel the timer
program or press EJECT to remove
the cassette tape.
• During timer recording standby mode,
the VCR mode cannot be selected. To
use the VCR, press TIMER REC at
first, then press VCR/DVD to change
to VCR mode. After you use the VCR,
press TIMER REC again to put the VCR
into timer recording standby mode.
• If you press TIMER REC during timer
recording, the recording operation will
be interrupted. If you press TIMER
REC again within the programmed time,
the recording operation will start again.
• After a power failure or disconnection
of the power plug, all programmed
recording settings and time display
will be lost upon resumption of power.
In this case, reset the clock (see page
21) and reprogram any timer
recordings.

2A77001AE(28-33)

DATE

START END

26(SU)

11:00PM 11:30PM 125 SLP

NOTES:
• Press CANCEL to move cursor backward
for correction.
• To record from external source set the
channel to "L". "L" will appear next to CH
125 (or 69).

enter other programs, repeat step
5 To
2 through 4.
• To return to the normal screen,
press VCR MENU twice.

〈+/—/ENTER/CANCEL/MENU〉

DATE

START END

26(SU)

11:00PM 11:30PM 125 SLP

〈+/—/ENTER/CANCEL/MENU〉

TIMER REC. The clock symbol( ) will appear on the
6 Press
display and the VCR stands by for recording. At the same
time, VCR mode will change to DVD mode automatically. You
can use DVD even if the VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.
The timer recording will start at 5 seconds before the time you
predetermined.
NOTES:
• If the clock symbol( ) does not appear on the display in spite
of the pressing of TIMER REC, the cassette may not have been
loaded yet. (see page 24)
• If the cassette is ejected in spite of the pressing of TIMER REC,
the erase prevention tab of the cassette may have been
removed. (see page 24)

8/29/02, 11:00 AM

ENGLISH

Timer recording

Timer-recording
Timer recording special case
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.
MO-SA: Monday to Saturday) Timer recording
Follow the procedure of timer recording on the previous
page. At picture 3 press SET + or – repeatedly until the
desired setting appears. Then press ENTER.
When you press SET – repeatedly, the indicator at
DATE will change as follows, in this case the day is
Friday.
The current day (Friday)

SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)

One month later
minus one day

MO-FR (Monday to Friday)

WKL-WE
(Weekly Wednesday)

WKL-TH (Weekly Thursday)

DATE

START END

Confirmation / Cancellation of the Timer
recording
Timer has been activated, press TIMER REC
1 Iftothedeactivate
the Timer. The clock symbol( ) will
disappear. Then press VCR/DVD to change to
VCR mode.
Timer program:
2 AtTo confirm
picture 1 on the
previous page select the
“TIMER REC SET” option
and press ENTER.
Then the timer program
list as right will appear on
the screen.
cancel Timer program:
3 To
Press SET + or – to

WKL-WE

select the unnecessary
program, then press
CANCEL to cancel the
program.

〈+/—/ENTER/CANCEL/MENU〉

DATE

START END

26(SU)

11:00PM 11:30PM 125 SLP

〈+/—/ENTER/CANCEL/MENU〉

DATE

START END

—

〈+/—/ENTER/CANCEL/MENU〉

VCR MENU repeatedly until the TV-picture
4 Press
appears.

In case Timer programs-overlap
• Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.

8 : 00

9 : 00

10 : 00

11 : 00

Program 1
Program 2
Deleted Parts
Program 3
Non Recorded Portion Parts

Recording
Control Settings

Prog.2

Prog.1

Prog.3

NOTES:
• If there are other timer record programs remaining,
TIMER REC must be pressed to reactivate the timer,
otherwise the remaining timer record programs will be
ignored.
• You cannot confirm the Timer program during timer
recording operation.
• You can correct or cancel a programmed setting in
program confirm mode.

NOTES:
• The daily/weekly recording can be made continuously until the recording is canceled or the tape
reaches the end.
• During timer recording the automatic rewinding
mechanism does not function.

32
2A77001AE(28-33)

8/29/02, 11:00 AM

Stereo recording and playback / Separate Audio Program (SAP)
The VHS Hi-Fi audio system permits high
fidelity recording of MTS STEREO TV
broadcasts.

POWER

OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

9
CH

TRACKING/
SET
—

TRACKING/
SET

SELECT/
ENTER

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

When a MTS STEREO broadcast is
received, the word STEREO will appear on the screen and the program can
be viewed or recorded in stereo.
The Hi-Fi STEREO recording procedure
is the same as for normal recordings.

STEREO

NOTE:
When using a CATV system, stereo TV programs may be transmitted
over a mono cable channel. In this case the word "STEREO" will not
appear and the sound will be in mono.

Output selection
When viewing an MTS STEREO TV program, or playing a prerecorded
VHS Hi-Fi STEREO videotape, press AUDIO SELECT to select how
the audio will be heard through the speakers. Normally set to the Hi-Fi
STEREO position, this button can be set to the MONO position if the
stereo broadcast or videotape audio is of poor quality. The "R" and "L"
positions allow the audio from the Right or Left Hi-Fi channel to be heard
over both TV speakers. This button has no effect when viewing a MONO
videotape or TV program. Each time when you press the button, OUTPUT
SELECTION display appears on the screen for several seconds. Refer
to the chart below.
OUTPUT
SELECTION

SOUND HEARD ON BOTH
SPEAKERS

STEREO
L CH
R CH
MONO

STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

TV/VCR

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

Separate Audio Program (SAP)
Your VCR is fitted with a SAP broadcast system which enables
you to switch to a separate audio program when viewing a
selected channel.
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.

1 Press VCR MENU. Then press or
2 Then press ENTER to select [ON].
Then press VCR MENU until the
menu screen is cleared.

to select "SAP".
MENU
TIMER REC SET
AUTO REPEAT ON
ON
SAP
CH SET UP
SYSTEM SET UP

OFF
OFF

〈+/—/ENTER/MENU〉

NOTES:
• When playing back a tape that is not
recorded in Hi-Fi stereo mode, the
audio will automatically be monaural.
• When listening to a VHS Hi-Fi video
tape or MTS broadcast through the
VHF/UHF jack (Audio/Video cord not
connected), the sound will be
monaural.

Listening to SAP
When the VCR is turned on or a channel selection is made, make
certain the letters "SAP" appears on the screen. This means that the
"Separate Audio Program" broadcasting is available.

STEREO SAP

SAP

33
2A77001AE(28-33)

8/29/02, 11:00 AM

ENGLISH

Stereo recording and
playback

Duplicating a video tape
Duplicating a video tape
If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
a blank cassette tape with the erase prevenREC/OTR on the recording VCR, then press
1 Load
4 Press
tion tab intact into the recording VCR.
PAUSE/STILL.
Load a previously recorded tape into the playback
VCR or CAMCORDER.

PLAY on the playback VCR or CAMCORDER,
5 Press
SPEED to select the desired tape speed SP
then press PAUSE/STILL.
2 orPress
SLP.
It is recommended that you set the Speed to the
SP mode on the recording VCR for best results.
INPUT SELECT to select AUDIO/VIDEO
3 Press
input position. "L" will appear in

the recording pause and the playback still
6 Release
simultaneously to begin the duplicating process.

the display.

Connection with second Video recorder

Connection with Video camera

Playback VCR

Playback Camcorder

To AV Jack

To VIDEO OUT

To AUDIO (R) OUT
Recording VCR
To AUDIO (L) OUT

AUDIO/VIDEO Cord (supplied)
Recording VCR
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
To VIDEO IN

To AUDIO (R) IN
To AUDIO (L) IN

AUDIO/VIDEO Cord (not supplied)

For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup
is shown above.

34
2A77001AE(34-39)

8/29/02, 10:55 AM

This unit applies to DVD discs from Region 1 only.
The loaded Disc (DVD, Audio-CD and MP3-CD) will be recognized automatically.
The suitable Disc-formats are: DVD, CD-R and CD-RW.
Some CD-R/RW discs may be incompatible.
Do not play DVD-ROM, DVD-Audio, CDV, Video-CD, CD-G or Photo CD to prevent accidental erasure of prerecorded material.
This unit cannot record disc material in DVD, Audio CD etc. onto a video tape.
" will appear on the screen for aprox.4

If you press the REC/OTR during DVD playback, a symbol mark "
seconds.

DVD DISC

Title
When two or more movies are recorded on a disc,
the disc is divided into two or more sections. Each
section is called a “TITLE”.

TITLE1
CHAPTER 1

TITLE2

CHAPTER 2

CHAPTER 1

CHAPTER 2

CHAPTER 3

TRACK 4

TRACK 5

Chapter
The titles can be subdivided into many sections.
Each section is called a “CHAPTER”.
Audio-CD
CD

Track

TRACK 1

TRACK 2

TRACK 3

An Audio CD can contain several items.
These are assigned to the tracks.

Removing Disc from Case
Be sure to hold the edge of disc. Do not touch the surface of the disc.
Pick up the disc gently from the case.
• Do not scratch the disc.
• Do not get dirt on the surface of the disc.
• Do not stick a label or adhesive tape on the disc.
• Do not drop or bend the disc.

Storing Disc
• Store the disc in the case to avoid risk of scratches, dirt or damage.
• Do not leave disc exposed to direct sunlight or in hot or humid places.

Cleaning Disc
Wipe the disc with a clean, dry cloth from center to edge.
• Do not wipe the disc round.
• Do not use liquid or aerosol cleaners.

35
2A77001AE(34-39)

8/29/02, 10:55 AM

ENGLISH

Disc

Setting setup language
The setup language can be selected.

POWER

OPEN/
CLOSE

EJECT

Preparation:
• Turn ON the TV and set to the video input mode.
• When using an amplifier, switch on the amplifier.

VCR/DVD to select the
1 Press
DVD mode. (The DVD indicator

VCR/DVD

DISPLAY/CALL

INPUT SELECT

will light.)
“No Disc” will appear on the
screen. (If a DVD disc has already
loaded, the playback will start
automatically.)
SET UP in the stop mode.
2 Press
The SETUP MENU of DVD will

CH
TRACKING/
SET
—

TRACKING/
SET

SELECT/
ENTER

appear on the screen.
Then press
or
to select
“Language”.

AB C

Picture
TV Shape 4:3LB

: Select

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

ZOOM

TITLE

RETURN

Press / to select On-Screen
3 Language,
then press ENTER.

AB C

Language
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
ENG
Subtitle Language ENG

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

SKIP/INDEX

SLOW

: Select

: Enter

TV/VCR

SEARCH/F.FWD

STOP

: Enter

/
to select desired
4 Press
language: English (English),
French (Français) or Spanish
(Español), then press ENTER.

AB C

Language
On-Screen Language ENG English
Dsc Menu Language ENG Fran ais
Audio Language
ENG Espa ol
Subtitle Language ENG

PAUSE/STILL

: Select

: Enter

NOTE: To make the SETUP screen disappear, press SET UP
(or RETURN).

If the DVD/VCR does not operate
properly: Static electricity, etc., may
affect the player's operation. Disconnect
the AC power cord once, then connect
it again.

36
2A77001AE(34-39)

8/29/02, 10:55 AM

Playback procedure
OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

OPEN/CLOSE.
1 Press
The disc tray will open.

a disc onto the tray.
2 Place
Hold the disc, position it with the
printed label side up, align it with
the guides, and place it in its
proper position.

CH
TRACKING/
SET
—

TRACKING/
SET

PLAY or OPEN/CLOSE.
3 Press
The disc tray closes automati-

SELECT/
ENTER

cally.
On the screen,
changes to
” and then playback will
“
commence.

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

• A menu screen may appear on
the TV screen, if the disc has
a menu feature. In this case,

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

ENGLISH

POWER

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

SEARCH/F.FWD

STOP

,
,
,
or
press
ENTER to operate a menu
feature.

TV/VCR

STOP to end playback.
4 Press
• The DVD/VCR memorizes the stopped point, depending on

SKIP/INDEX

SLOW

PAUSE/STILL

the disc. “To Return To The Last Scene Viewed, Press Play.
To Disable This Operation, Press STOP Again.” appears on
the screen for approx. 4 seconds. “ ” will continue blinking
in the display until the playback is stopped completely. Press
PLAY to resume playback (from the scene point).
• If you press STOP again (“ ” appears on the screen) or
unload the disc, the DVD/VCR will clear the stopped point.
Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and DVD/VCR turns off.

NOTES:
• If a non-compatible disc is loaded, "Please Check Disc", "Disc playback unauthorized Consult owners manual
for further information" or "Parental Lock" will appear on the TV screen according to the type of loaded disc. In
this case, check your disc again (See pages 35 and 45).
• Some discs may take a minute or so to start playback.
• A “Prohibition” symbol
may appear at the upper right of the screen. This symbol means either the feature you
tried is not available on the disc, or the DVD/VCR can not access the feature at this time. This does not indicate
a problem with the DVD/VCR.
• When you set a single-faced disc label downwards (ie. the wrong way up) and press PLAY or OPEN/CLOSE,
"
" will appear and remain on the screen for approx. 40 seconds and then it will change to "Please Check Disc".
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this DVD/VCR plays
DVDs according to the disc contents the software producers designed, some playback features may not be
available. Also refer to the instructions supplied with the DVDs.
• When playing DTS-encoded Audio CDs, excessive noise will be heard from the analog stereo outputs. To avoid
possible damage to the audio system, the consumer should take proper precautions when the analog stereo
outputs of the DVD/VCR are connected to an amplification system.

2A77001AE(34-39)

8/29/02, 10:55 AM

Special playback
Note: There may be a slight delay
between pressing the button and the
function activation.

POWER

OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

Review Playback
Press REW during normal playback.
Each press of REW will increase the speed of the search x2 ( ), x8
(
), x30 (
), x100 (
). (in case of Audio-CD: x4 ( ) and x8
(
) are available)
• To resume normal playback, press PLAY.

DVD MENU

Press F.FWD during normal playback.
Each press of F.FWD will increase the speed of the search x2 ( ),
x8 (
), x30 (
), x100 (
). (in case of Audio-CD: x4 ( ) and
x8 (
) are available)
• To resume normal playback, press PLAY.

INPUT SELECT

TRACKING/
SET
—

Fast Forward Playback

Still Playback
TRACKING/
SET

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

Press PAUSE/STILL during normal
playback.
To resume normal playback, press
PLAY.

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

SUB TITLE/
ATR

PLAY MODE/
SPEED

TV/VCR

Frame Advance
REW/SEARCH

INDEX/SKIP

REC/OTR

PLAY

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

Press PAUSE/STILL during still playback.
One frame is advanced each time
you press PAUSE/STILL.
To resume normal playback, press
PLAY.

Slow-motion Playback
NOTES:
• The unit is capable of holding a still
video image or On screen display image
on your television screen indefinitely. If
you leave the still video image or On
screen display image displayed on your
TV for an extended period of time, you
risk permanent damage to your
television screen. Projection televisions
are very susceptible.
• Some titles may not display chapter
numbers.
• When you set “Title Stop” to “Off” (See
page 53), you can access chapter in
another title. If you go back to the
preceding title by pressing the SKIP, the
DVD/VCR locates the first chapter of the
title. When “Title Stop” is set to “On”.
you can access chapters only within the
current title.

38
2A77001AE(34-39)

Press SLOW during normal playback or still playback.
Each press of SLOW will change the speed of the slow x1/2, x1/4,
x1/8.
• To resume normal playback, press PLAY.
• To resume the still playback, press PAUSE/STILL.

Locating a chapter or track
T 1C 1
Press SKIP (
) Forward or SKIP
(
) Reverse during playback to
locate a chapter or track that you
want to watch.
Each time you press the button, a
“C (chapter)” number or “T (track)”
number is skipped.
When you press SKIP (
), playback starts from the beginning
of the current chapter or track.
) twice, playback starts from the
When you press SKIP (
beginning of the preceding chapter or track.

8/29/02, 10:55 AM

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)

POWER

Zooming

OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

This unit will allow you to zoom in on the frame image. You can
then make selections by switching the position of the frame.
ZOOM during playback.
1 Press
The center part of the image will
be zoomed in.
As you repeatedly press the
ENTER or ZOOM while “ZOOM”
is selected, the magnification level
changes. Variation of the levels Zoom Off
: Select
: Change
includes image reduction.
• If you select “EXIT” and press
the ENTER, you can turn off the symbol mark, keeping the
current magnification level.
ZOOM
EXIT

CH
TRACKING/
SET
—

TRACKING/
SET

SELECT/
ENTER

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

Press
/
or
/
to view a different part of the frame.
2 You
may move the frame from the center position to UP,
DOWN, LEFT or RIGHT direction.
• Press CLEAR to restore the zoom point to the center of the
picture.

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

TV/VCR

SEARCH/F.FWD

STOP

“ZOOM” is selected, press ZOOM repeatedly to return to
3 While
a 1:1 view.

SKIP/INDEX

SLOW

PAUSE/STILL

39
2A77001AE(34-39)

8/29/02, 10:55 AM

ENGLISH

Zooming

Repeat playback

POWER

OPEN/
CLOSE

EJECT

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)
VCR/DVD

DISPLAY/CALL

INPUT SELECT

REPEAT PLAYBACK
PLAY MODE repeatedly to select “Chapter Repeat”,
1 Press
“Title Repeat” or “ALL Repeat”. (In case of CD, select “Track
Repeat” or “ ALL Repeat”.)

DVD

Chapter Repeat
TRACKING/
SET
—

Track Repeat

TRACKING/
SET

SELECT/
ENTER

playback repeat playback will start automatically.
2 During
During stop mode press PLAY within about 5 seconds after
CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

TV/VCR

SEARCH/F.FWD

you press PLAY MODE to start repeat playback.
• To resume normal playback, select Off.

A-B Repeat Playback
A-B repeat playback allows you to repeat material between two
selected points.
REPEAT A-B during
1 Press
playback.
The start point is selected.
A-

INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

Press REPEAT A-B again.
2 The
end point is selected.
Playback starts at the point that
you selected. Playback stops at
the end point, returns to Point A
automatically, then starts again.
To resume normal playback,
press REPEAT A-B again.
“Repeat Off” appears on the screen.

A-B

NOTES:
• Some discs may not work with the
repeat operation.
• In A-B repeat mode, subtitles near
point A or B may not appear.
• During the A-B Repeat Playback the
ANGLE feature will not operate.
• You may not be able to set A-B Repeat, depending on the scenes of the
DVD.
• A-B repeat does not work with an interactive DVD and MP3-CD.
• Random playback can not be combined with Repeat playback.

40
2A77001AE(40-45)

8/29/02, 11:07 AM

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)

Memory playback
POWER

OPEN/
CLOSE

EJECT

You can arrange the order of titles, chapter or tracks on the disc.

VCR/DVD

DISPLAY/CALL

INPUT SELECT

1 Press MEMORY.
1 T:- 2 T:- 3 T:- 4 T:- 5 T:- 6 T:- 7 T:- -

CT:- - CT:- - CT:- - CT:- - CT:- - CT:- - CT:- - -

Memory
: Select 0-9 : Input

Press
/
to
2 select
“T” or “CT”.

TRACKING/
SET
—

1 T:- - CT:- - -

Memory

CH
TRACKING/
SET

SELECT/
ENTER

Use Number keys
to Input the
favorite number.

: Play

1 T:01
2 T:- 3 T:- 4 T:- 5 T:- 6 T:- 7 T:- -

CT:002
CT:- - CT:- - CT:- - CT:- - CT:- - CT:- - -

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

TV/VCR

1 T:01 CT:002

or ENTER.
3 Press
Set the “T” and
“CT” to bar that
you want to enter
as in step 2.

In stop mode

1 T:01
2 T:02
3 T:- 4 T:- 5 T:- 6 T:- 7 T:- -

CT:002
CT:004
CT:- - CT:- - CT:- - CT:- - CT:- - -

REC/OTR

SLOW

PAUSE/STILL

: Play

In play back

2 T:02 CT:004

Memory
: Select 0-9 : Input

SKIP/INDEX

: Select 0-9 : Input

T : Title number
CT : Chapter number or track number
• If you input a large number than the number that is recorded
on the disc, the bar will be skipped.
• The input number into "T" for CD or MP3 is not effective.

SEARCH/F.FWD

STOP

In play back

: Play

Memory

INDEX/SKIP

: Play

Memory
: Select 0-9 : Input

DVD MENU

: Select 0-9 : Input

In stop mode

Memory

In play back

In stop mode

: Play

: Select 0-9 : Input

: Play

• When you select another chapter in the same title, you do
not need to select the title number.
• To cancel the programmed selection, press CANCEL.

4 Press PLAY to start MEMORY playback.

• To resume normal playback, press CANCEL.

Random playback
PLAY MODE repeatedly to select “ Chapter Random”
1 Press
or “Title Random”.(In case of CD, select Track Random)
NOTES:
• The memory playback is cancelled
when press STOP during memory
playback.
• Random playback can not be
combined with Repeat playback.
• You can program up to 30 selections
into the memory.
• Depending on the DVD, Chapter
Random operation may not work
during playback.
• You cannot use the random playback
with memory playback.

2A77001AE(40-45)

DVD

Chapter Random

Track Random

playback random playback will start automatically.
2 During
During stop mode press PLAY within about 5 seconds after
you press PLAY MODE to start random playback.
• To resume normal playback, select Off.

41
8/29/02, 11:07 AM

ENGLISH

Memory playback/Random playback

MP3 Playback
This player can play back the MP3-data
which has been recorded on CD-R or CDRW. To produce the MP3-data, you need a
Windows-PC with CD-ROM drive and a MP3encoding Software (not supplied).
The Apple-HFS-System can not be played.

MP3 CD Information
Limitations on MP3 CD playback
• MP3 CD is the disc that is standardized by
ISO9660, its file name must include 3-digits
extension letters, “mp3”.
• The directory and file names of the MP3
CD must correspond to the ISO
standardized files.
• This unit can read 200 files per disc. If
one directory has more than 200 files, it
reads up to 200 files, the remaining files will
be omitted.
• As for multi-session disc, only the first
session can be played.
• If the CD has both audio tracks and MP3
files, only audio tracks are played.
• It may take more than one minute for this
unit to read MP3 files depending on its
structure.
• Music recorded by “Joliet Recording
Specification” can be played back, the file
name is displayed (within 8 letters) on the
screen. Long file names will be condensed.
• The music files recorded by “Hierarchical
File System” (HFS) cannot be played.
Limitations on display
• The maximum number for display is 8
letters. Available letters for display are the
following: capital or small alphabets of A
through Z, numbers of 0 through 9, and _
(under score).
• Other characters than those above are
replaced in hyphen.
Notes on MP3 files
To play back MP3 CD in the recorded order,
1. Use MP3 software that records data
alphabetically or numerically.
2. Name each file including a two-digit or threedigit number (e.g. “01” “02” or “001” “002”).
3. Refrain from making too many sub-folders.
CAUTION:
• Some MP3 CDs can not be played back
depending on the recording conditions.
• The CD-R/RW that has no music data or
non-MP3 files can not be played back.

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD
indicator will light.)

Press OPEN/CLOSE.
1 The
disc tray will open.
Place a disc onto the tray.

PLAY or OPEN/CLOSE.
2 Press
The disc tray closes automatically.

Press DISPLAY.
3 Then
/
press
MP3

to select
and press ENTER.

T 1

MP3

000:23
EAM

PCM

: Select

: Enter

Press / or / to select the desired track, then press
4 ENTER.
Track is selected and play commences.
• In case the folder includes more than 9 tracks, press
/
to display next track list.
• To remove track list, press CANCEL.
• Press / to select “T” and press Number keys your
desired to input.
T 1

MP3

000:23

1. \ CRYINI~1
2. \ DANGER~1
3. \ GITARREN
4. \ LILYWA~1
5. \ MERCYS~1
6. \ OBSESS~1
7. \ PINKPA~1
8. \ RUNNIN~1

: Select

EAM

PCM

: Search

STOP to end playback.
5 Press
• The unit records the stopped track.
Press PLAY to resume playback (from the beginning of
track).
• If you press STOP again or unload the disc, the unit will
clear the stopped track.
Press OPEN/CLOSE.
6 The
disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and DVD/VCR turns off.
NOTES:
• During MP3-Playback, you can not use SEARCH, A-B
Repeat functions.
• You can use Repeat(Track or All) and Random functions for
MP3 CD Playback.(See page 40 and 41)

42
2A77001AE(40-45)

On the TV-screen, “
” and then
reading file number will appear.
Reading will take as much
time as the number of file.

8/29/02, 11:07 AM

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)
POWER

OPEN/
CLOSE

EJECT

VCR/DVD

Changing soundtrack language

DISPLAY/CALL

INPUT SELECT

You can select the language when you play a multilingual disc.
AUDIO during playback.
1 Press
The current soundtrack language
is displayed.

ENG1
ENG2
FRE1

Audio:FRE1
: Select

CH
TRACKING/
SET
—

TRACKING/
SET

SELECT/
ENTER

CH
DVD MENU

2CH
5.1CH
2CH

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

2CH
: Return

2CH

AUDIO repeatedly until
2 Press
the desired language is selected.
The on-screen display will disappear after a few seconds.
• To turn off the soundtrack
setting display,press the
CLEAR or ENTER.

ENG1
ENG2
FRE1

2CH
5.1CH
2CH

Audio:ENG1
: Select

2CH
: Return

2CH

Changing Subtitles language
AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

TV/VCR

SEARCH/F FWD

NOTES:
• If the desired language is not heard after
pressing AUDIO several times, the
language is not recorded on the disc.
• Changing soundtrack or subtitle
language is cancelled when you open the
disc tray or turn the power off. The initial
default language or available language
will be heard and seen if the disc is
played back again.
• Depending on the DVD you may be
unable to turn on, turn off, or change the
subtitles, even if they are recorded on the
disc. While playing the DVD, the subtitle
may change while opening or closing the
disc tray, or while changing the title.
• During some scenes, the subtitles may not
appear immediately after you select “On”.
• The abbreviation of the language
appears instead of the language name.
Refer to the list of languages and their
abbreviations. (See on page 57.)

You can select the language when playing back a disc recorded
with multi-lingual subtitles.
SUB TITLE during
1 Press
playback.
Then press
/
to select the
desired language.
• To turn off the subtitle setting
display, press the CLEAR or
ENTER.
• To turn the subtitles off, select
“Off”.
Press SUB TITLE or
2 turn
Subtitles on or off.

Off
ENG 1
SPA 1
FRE 1

Subtitle:- - - Off
: Select
: Return

to
Off
ENG 1
SPA 1
FRE 1

Subtitle:ENG1 On
: Select
: On/Off

: Return

43
2A77001AE(40-45)

8/29/02, 11:07 AM

ENGLISH

Changing soundtrack language / Changing Subtitles language

Changing angles / Title selection / DVD menu
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)

POWER

OPEN/
CLOSE

EJECT

Changing Angles

VCR/DVD

DISPLAY/CALL

INPUT SELECT

When playing back a disc recorded with multi-angle facility, you
can change the angle that you are viewing the scene from.
ANGLE during playback.
1 Press
The current angle will appear.
1
2
3

Angle :1
: Select

CH
TRACKING/
SET
—

TRACKING/
SET

SELECT/
ENTER

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

TV/VCR

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

repeatedly until the desired angle is

• To turn off the angle number display, press the CLEAR.
• You can change the camera angle directly by pressing the
number keys corresponding to its angle number instead of
using the
/ .

CH
DVD MENU

ANGLE or
2 Press
selected.

: Return

PAUSE/STILL

Title Selection
Two or more titles are recorded on some discs. If the title menu
is recorded on the disc, you can select the desired title.
TITLE during playback.
1 Press
Title menu appears on the screen.
• Press TITLE again to resume playback at the scene
when you pressed TITLE.

2 Press / or / to select the desired title.
ENTER or PLAY.
3 Press
The playback of the selected title will start.
DVD Menu
Some DVDs allow you to select the disc contents using the
menu.
When you play back these DVDs, you can select the subtitle
language and sound-track language,etc. using the DVD menu.
Press DVD MENU during playback.
1 The
DVD menu appears on the screen.

NOTE:
Depending on the DVD, you may not
be able to change the angles even if
multi-angles are recorded on the disc,
or you may be unable to select the title,
and a “title menu” may simply be called
a “menu” or “title” in the instructions
supplied with the disc.

• Press DVD MENU again to resume playback at
the scene when you pressed DVD MENU.

2 Press

to select the desired item.

Press ENTER.
3 The
menu continues to another screen. Repeat steps 2 and 3 to
set the item completely.

44
2A77001AE(40-45)

8/29/02, 11:07 AM

Parental control
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)

ENGLISH

Some discs are specified not suitable
for children. Such discs can be
prevented from play back with the
unit.

Parental control setting
POWER

OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

SET UP in the stop mode.
1 Press
Press or to select “Operation”.

AB C

Picture
TV Shape 4:3LB

: Select

or
to select “Parental Lock”,
2 Press
then press ENTER.

CH
TRACKING/
SET
—

TRACKING/
SET

3 Press

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

REW/SEARCH

INDEX/SKIP

REC/OTR

Auto Off
Off On
Off

: Select

TIMER REC

AB C

Operation
Pause/Still
Parental Lock
Title Stop

SELECT/
ENTER

DVD MENU

: Enter

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

SKIP/INDEX

SLOW

to select Off or On.
AB C

Operation
Off: The parental lock feature does
Pause/Still
Auto Off
Parental Lock
Off On
not function.
Title Stop
Off
After pressing the ENTER, follow
step 4 below.
: Select
: Enter
On: To activate the parental lock feature or change the setting, press the ENTER button and
follow steps 4-6 below.

TV/VCR

SEARCH/F.FWD

STOP

: Enter

Number keys to input a 4-digits
4 Press
password then press the ENTER
button.
• If you input a wrong number, press
CANCEL.

Auto Off
Off On
Off Security Code ----

: Select

PAUSE/STILL

NOTES:
• If each setup (page 45~55) has been
completed, the unit can always be
worked under the same conditions
(especially with DVD discs).
Each setup will be retained in the
memory if you turn the power off.
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with
specific rating level information though
its disc jacket says "adult". For those
discs, the age restriction will not work.
• Do not forget the password. If you forget
the password, contact customer service.

AB C

Operation
Pause/Still
Parental Lock
Title Stop

the code of a country/area whose
5 Enter
standards were used to rate the DVD
disc. (See the list on the page 46.)

: Enter

AB C

Operation
Pause/Still
Parental Lock
Title Stop

Auto Off
Off On
Off Area Code

: Select

: Enter

45
2A77001AE(40-45)

8/29/02, 11:08 AM

Parental control (Continued)

POWER

OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

CH
TRACKING/
SET
Ð

TRACKING/
SET

SELECT/
ENTER

Country/Area
AUSTRALIA
BELGIUM
CANADA
CHINA
CHINA HONG KONG
DENMARK
FINLAND
FRANCE
GERMANY
INDONESIA
ITALY
JAPAN
MALAYSIA

Code
AU
BE
CA
CN
HK
DK
FI
FR
DE
ID
IT
JP
MY

Country/Area
NETHERLANDS
NORWAY
PHILIPPINES
RUSSIAN FEDERATION
SINGAPORE
SPAIN
SWEDEN
SWITZERLAND
TAIWAN
THAILAND
UNITED KINGDOM
UNITED STATES

Code
NL
NO
PH
RU
SG
ES
SE
CH
TW
TH
GB
US

a) Press
/
to select the first character.
b) Press the / to shift and press / to select the second
character.
c) Press ENTER.

6 Press

to select the parental lock level, then press ENTER.
AB C

CH
SET UP/

DVD MENU VCR MENU

CLEAR/
CANCEL

RETURN

TITLE

REPEAT A-B

ZOOM

Operation
Pause/Still
Parental Lock
Title Stop

Auto Off
Off On
Off Area Code
Level

: Select
AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER
TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

TV/VCR

PLAY

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

US
7

: Enter

You cannot play DVD discs rated higher than the level you selected
unless you cancel the parental lock function.
For example, when you select level 7, discs rated higher than level
7 are locked out and cannot be played.
The parental lock level is equivalent to following the USA movie ratings.
Level 7: NC-17 17 years old and above
Level 6: R
Under 17 years old Parental guidance suggested
Level 4: PG 13
Parental guidance less than 13 years old
Level 3: PG
Parental guidance
Level 1: G
All ages
The parental lock levels for other countries/areas other than the U.S.
are included for future use. Check the appropriate parental lock level
when you buy a DVD disc equipped with the parental lock feature in
the future.

7 To make the SETUP screen disappear, press SET UP.
To change the parental lock level
Follow steps 4- 6.
To change your 4-digit security code
1) After selecting “On” or “Off” press STOP four times, then press
ENTER.
The 4-digit security code is cleared.
2) Press Number Keys to create a new 4-digit security code.
3) Press ENTER.

46
2A77001AE(46-51)

8/29/02, 11:06 AM

Setting menu language

POWER

OPEN/
CLOSE

EJECT

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)
SET UP in the stop mode.
1 Press
Press
or
to select

VCR/DVD

DISPLAY/CALL

INPUT SELECT

AB C

Picture
TV Shape 4:3LB
VIDEO OUT SELECT

“Language”.

: Select

or
to select “Disc
Press
2 Menu
Language”.

CH
TRACKING/
SET
—

ENGLISH

You can select the language of the
disc menu messages of DVDs.

: Enter

AB C

Language
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
ENG
Subtitle Language ENG

TRACKING/
SET

SELECT/
ENTER

: Select

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

ZOOM

TITLE

RETURN

REPEAT A-B

Press ENTER.
3 Press
or

to select your
desired language, then press
ENTER.

: Enter

AB C

Language
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
ENG
Subtitle Language ENG

English
French
Spanish
Others
Code E S

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

TV/VCR

: Select

: Enter

English, French, Spanish
The selected language is the first-priority Menu language.

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

Others: Other languages can be selected (See the Table of
languages on page 57).

4 To make the SETUP screen disappear, press SET UP.

47
2A77001AE(46-51)

8/29/02, 11:06 AM

Setting subtitle language
The same subtitle language can
always be selected even if you replace
the disc or turn the power off.

POWER

OPEN/
CLOSE

EJECT

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)
SET UP in the stop mode.
1 Press
Press
or
to select

VCR/DVD

DISPLAY/CALL

INPUT SELECT

AB C

Picture
TV Shape 4:3LB
VIDEO OUT SELECT

“Language”.

: Select

: Enter

or
2 Press
Language”.

CH
TRACKING/
SET
—

to select “Subtitle
AB C

Language
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
ENG
Subtitle Language ENG

TRACKING/
SET

SELECT/
ENTER

: Select

: Enter

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

ZOOM

TITLE

RETURN

REPEAT A-B

Press ENTER.
3 Press
or

AB C

to select your
desired language, then press
ENTER.

Language
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
ENG
Subtitle Language ENG

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

: Select
TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

: Enter

TV/VCR

SEARCH/F.FWD

STOP

English
French
Spanish
No Subtitle
Others
Code E S

English, French, Spanish
The subtitle is displayed with the selected language if it is
recorded on the disc.

SKIP/INDEX

SLOW

PAUSE/STILL

Others: If you want to select another language, enter the
language code (See the Table of languages on page 57).

No Subtitle:
Subtitles do not appear.

4 To make the SETUP screen disappear, press SET UP.
NOTES:
• If the selected language is not recorded
on the disc, the first-priority language is
selected.
• Some DVD discs may be set to display
Subtitles in a different language than
you selected. A prior subtitle language
may be programmed on the disc.

48
2A77001AE(46-51)

8/29/02, 11:06 AM

Setting audio soundtrack language
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)
SET UP in the stop mode.
1 Press
or
to select
Press

OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

: Select

or
2 Press
Language”.

to select “Audio

: Enter

AB C

Language
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
ENG
Subtitle Language ENG

CH
TRACKING/
SET
—

AB C

Picture
TV Shape 4:3LB
VIDEO OUT SELECT

“Language”.
POWER

ENGLISH

The same audio soundtrack language
can always be selected by your unit
even if you replace the disc or turn
the power off.

: Select

TRACKING/
SET

: Enter

SELECT/
ENTER

Press ENTER.
3 Press
or
to select your
CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

desired Audio Language, then
press ENTER.

AB C

Language
On-Screen Language ENG
Disc Menu Language ENG
Audio Language
ENG
Subtitle Language ENG

English
French
Spanish
Others
Code E S

: Select

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

TV/VCR

SEARCH/F.FWD

STOP

: Enter

English, French, Spanish
The language you have selected will play if it is recorded on
the disc.
Others: If you want to select another language, enter the
language code (See the Table of languages on page 57).

SKIP/INDEX

SLOW

PAUSE/STILL

4 To make the SETUP screen disappear, press SET UP.
NOTES:
• If the selected language is not recorded on the disc, the original
language will be heard.
• Some DVD discs may be played in a
different language than you selected.
A prior language may be programmed
on the disc.

49
2A77001AE(46-51)

8/29/02, 11:06 AM

Setting the aspect ratio of TV screen
You can select the aspect ratio for
your TV.

POWER

OPEN/
CLOSE

EJECT

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)
SET UP in the stop mode.
1 Press
or
to select
Press

VCR/DVD

DISPLAY/CALL

INPUT SELECT

AB C

Picture
TV Shape 4:3LB
VIDEO OUT SELECT

“Picture”.

: Select

Press ENTER.
2 Press
or

CH
TRACKING/
SET
—

TRACKING/
SET

to select your
desired screen type, then press
ENTER.

: Enter

AB C

Picture
TV Shape 4:3LB

SELECT/
ENTER

: Select

4:3 Letterbox
4:3 Normal
16:9 Widescreen

: Enter

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
ANGLE/
CLOCK/
MEMORY/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

SUB TITLE/
ATR

PLAY MODE/
SPEED

TV/VCR

PLAY

NOTES:
• The displayable picture size is preset on
the DVD video disc. Therefore, the
playback picture of some DVD video
discs may not conform to the picture size
you select.
• When you play DVD video discs
recorded in the 4:3 picture size only, the
playback picture always appears in the
4:3 picture size regardless of the TV
shape setting.
• If you select “16:9 widescreen” and you
own a 4:3 TV set, the DVD playback
picture will be horizontally distorted
during playback. Images will appear to
be horizontally compressed. Always be
sure that your TV shape conforms to the
actual TV in use.

You have the following screen sizes to choose from:
4:3 Letterbox:
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars above and below
the picture.
4:3 Normal:
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen. Either or both
sides of the picture are cut off.
16:9 Widescreen:
Select this mode when connecting to a wide-screen TV.
A wide screen picture is displayed full size.

3 To make the SETUP screen disappear, press SET UP.

50
2A77001AE(46-51)

8/29/02, 11:06 AM

Setting on Screen display

POWER

OPEN/
CLOSE

EJECT

VCR/DVD

DISPLAY/CALL

INPUT SELECT

Press SET UP in the stop mode.
1 Press
or
to select “Display”

AB C

Picture
TV Shape 4:3LB
VIDEO OUT SELECT

: Select

or
Press
2 Screen
Display”.

CH
TRACKING/
SET
—

ENGLISH

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)

: Enter

to select “OnAB C

Display
On-Screen Display On
Background
Picture
Screen Saver
On

TRACKING/
SET

SELECT/
ENTER

: Select

: Enter

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

ZOOM

TITLE

RETURN

REPEAT A-B

Press ENTER.
3 Press
or
to select “On” or
“Off”, then press ENTER.

AB C

Display
Off
On-Screen Display Off
Background
Picture On
Screen Saver
On

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

: Select
TIMER REC

SUB TITLE/
ATR

PLAY MODE/
SPEED

On:
REW/SEARCH

PLAY

SEARCH/F.FWD

Off:
INDEX/SKIP

REC/OTR

STOP

SKIP/INDEX

SLOW

: Enter

TV/VCR

PAUSE/STILL

Operational modes (e.g. “ ”, “
”) appear when you
press the buttons (factory setting).
Operational modes (e.g. “ ”, “
”) do not appear when
you press any buttons.

4 To make the SETUP screen disappear, press SET UP.

51
2A77001AE(46-51)

8/29/02, 11:06 AM

Setting Audio

POWER

1
4
7

OPEN/
CLOSE

EJECT

2
5
8

VCR/DVD

DISPLAY/CALL

INPUT SELECT

CH
TRACKING/
SET

SELECT/
ENTER

CH
SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

SUB TITLE/
ATR

Press
or
to select “Audio Out
or
Select”, then press ENTER. Press
to select your desired output sound,
then press ENTER.

PLAY MODE/
SPEED

: Select

Bitstream
Analog 2ch
PCM

: Enter

PLAY

Select when connected to an amplifier equipped with a Dolby
Digital, DTS, MPEG1 or MPEG2 decoder. The DVD/VCR outputs
digital audio information in the bitstream format when you play a
DVD video disc recorded on the Dolby Digital, DTS, MPEG1 or
MPEG2 recording system.
Analog 2ch: Select when connected to a TV, Dolby Pro Logic or stereo system
via the analog audio jacks.
PCM:
Select when connected to a 2 channel digital stereo amplifier.
The DVD/VCR outputs sounds in the PCM 2ch format when you
play a DVD video disc recorded on the Dolby Digital. MPEG1 or
MPEG2 recording system.

3 To make the SETUP screen disappear, press SET UP.
Dynamic Range Control
Turn on or off a function that makes faint sounds easier to hear
even if you lower the volume during late hours playback.

TV/VCR

SEARCH/F.FWD

NOTES:
• The Dynamic Range Control function
works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Control
may differ depending on the DVD video
disc.
• The vocal output feature is used during
playback of Dolby Digital (multi-channel)
recorded DVD KARAOKE discs. This
feature allows you to turn off vocal audio
tracks, or restore them for background
accompaniment.
• When playing KARAOKE, connect the
appropriate audio equipment such as an
amplifier to the DVD player.

SET UP in the stop mode.
1 Press
or
to select “Audio”.
Press
or
to select “Dynamic
2 Press
Range Control”, then press ENTER.
or
to select “On” or “Off”,
Press
then press ENTER.

Off:
On:

: Select

Off
On

: Enter

Full dynamic range is maintained.
Dynamic range is reduced.

Karaoke Vocal
Turn on or off the vocal output during DVD KARAOKE disc playback.
Press SET UP in the stop mode.
1 Press
or
to select “Audio”.
or
to select “Karaoke
2 Press
Vocal”, then press ENTER.
or
to select “On” or “Off”,
Press
then press ENTER.
The primary vocal is not output.
The primary vocal is output when
it is recorded on the disc.

make the SETUP screen disappear,
3 To
press SET UP.

AB C

Audio
Audio Out Select
Bitstream
Dynamic Range Control On
Karaoke Vocal
Off

make the SETUP screen disappear,
3 To
press SET UP.

Off:
On:

2A77001AE(52-57)

AB C

Audio
Audio Out Select
Bitstream
Dynamic Range Control On
Karaoke Vocal
On

Bitstream:

TRACKING/
SET
—

DVD MENU

SET UP in the stop mode.
1 Press
or
to select “Audio”.
Press

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)
Audio Out Select
Select the output sound format corresponding to your system
connection.
For details of sound recording systems, see on page 55.

8/29/02, 11:05 AM

AB C

Audio
Audio Out Select
Bitstream
Dynamic Range Control On
Karaoke Vocal
Off

: Select

Off
On

: Enter

Setting Operation

POWER

OPEN/
CLOSE

EJECT

ENGLISH

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)
Pause/Still
Select the resolution of still pictures.

VCR/DVD

DISPLAY/CALL

INPUT SELECT

Press SET UP in the stop mode.
1 Press
or
to select
“Operation”.

AB C

Picture
TV Shape 4:3LB
VIDEO OUT SELECT

: Select

: Enter

CH
TRACKING/
SET
—

TRACKING/
SET

or
to select “Pause/
2 Press
Still”, then press ENTER. Press
or
to select “Auto” or
“Frame”, then press ENTER.

SELECT/
ENTER

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

Operation
Pause/Still
Auto
Parental Lock Off
Title Stop
Off

Auto
Frame

: Select

CH
DVD MENU

AB C

PLAY MODE/
SPEED

PLAY

TV/VCR

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

: Enter

Auto: For normal use. Still and fast motion images can be
paused.
Frame: The resolution of still pictures is improved, so that you
can make a motionless picture clearer when you pause
it.

3 To make the SETUP screen disappear, press SET UP.
Title Stop
Turn on or off a feature that automatically stops playback after a
title has been viewed.
SET UP in the stop mode.
1 Press
Press or to select “Operation”.

AB C

Picture
TV Shape 4:3LB
VIDEO OUT SELECT

: Select

ENTER, then press
or
2 Pressto select
“Title Stop”, then
press ENTER.
or
to select “On” or
Press
“Off”, then press ENTER.
Off:
On:

The DVD/VCR continues
after playback of a title is
completed.
The DVD/VCR stops after
playback of a title is completed.

: Enter

AB C

Operation
Pause/Still
Auto
Parental Lock Off
Title Stop
Off

Off
On

: Select

: Enter

3 To make the SETUP screen disappear, press SET UP.
53
2A77001AE(52-57)

8/29/02, 11:05 AM

Setting Background/Setting Screen Saver
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)
POWER

OPEN/
CLOSE

EJECT

Setting Background
Select the background color or background picture.

VCR/DVD

DISPLAY/CALL

INPUT SELECT

SET UP in the stop mode.
1 Press
Press or to select “Display”.

AB C

Picture
TV Shape 4:3LB
VIDEO OUT SELECT

: Select

: Enter

CH
TRACKING/
SET
—

TRACKING/
SET

SELECT/
ENTER

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

AUDIO/
MEMORY/
ANGLE/
CLOCK/
AUDIO SELECT ZERO RETURN COUNTER RESET COUNTER

TIMER REC

REW/SEARCH

INDEX/SKIP

REC/OTR

SUB TITLE/
ATR

PLAY MODE/
SPEED

PLAY

TV/VCR

or
to select
2 Press
“Background”, then press

AB C

ENTER. Press
or
to
select your desired background,
then press ENTER.

Display
On-Screen Display On

Blue

Background Picture

Gray

Screen Saver

Picture

Jacket

Blue:
Blue background.
: Select
: Enter
Gray:
Gray background.
Picture: Use the picture which appears when you turn on the
DVD/VCR as a background.
Jacket: Use the jacket picture included on some discs as a
background. If it is not included, a gray background will
be substituted.

3 To make the SETUP screen disappear, press SET UP.

SEARCH/F.FWD

STOP

SKIP/INDEX

SLOW

PAUSE/STILL

Setting Screen Saver (DVD only)
To turn the screen saver on or off.
Press SET UP in the stop mode.
1 Press
or
to select
“Display”.

AB C

Picture
TV Shape 4:3LB
VIDEO OUT SELECT

: Select

or
to select “Screen
2 Press
Saver”, then press ENTER.
or
to select “On” or
Press
“Off”, then press ENTER.

: Enter

AB C

Display
On-Screen Display On
Background Picture
Screen Saver On

Off: The screen saver is disengaged.
On: The screen saver operates
in 10 minutes after you press
PAUSE/STILL.

Off
On

: Select

: Enter

3 To make the SETUP screen disappear, press SET UP.
54
2A77001AE(52-57)

8/29/02, 11:05 AM

Setting initial setup/output sound conversion table
You can install the initial system
setting.

Setting initial setup

OPEN/
CLOSE

EJECT

• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)

ENGLISH

POWER

Preparation:

VCR/DVD

DISPLAY/CALL

Press SET UP in the stop mode.
1 Press
or
to select “Initial
Setup”.

INPUT SELECT

: Select

CH
TRACKING/
SET
—

AB C

Picture
TV Shape 4:3LB

ENTER, then press
2 Pressto select
“On-Screen

TRACKING/
SET

AB C

Initial Setup
On-Screen Language ENG
TV Shape
4:3LB
Audio Out Select
Bitstream

Language”, “TV Shape” or
“Audio Out Select”.

SELECT/
ENTER

: Enter

: Select

English
Fran ais
Espa ol

: Enter

CH
DVD MENU

SET UP/
VCR MENU

CLEAR/
CANCEL

RETURN

ZOOM

TITLE

REPEAT A-B

On-Screen Language:
TV Shape:
Audio Out Select:

See on page 36.
See on page 50.
See on page 52.

3 To make the SETUP screen disappear, press SET UP.
Output sound conversion table (sampling frequency/quantization bit)
You can select the output sound format corresponding to your system connection (see page 52).
ÒBitstreamÓ
Discs

Recording system

OUT jack

Bitstream

48 kHz/20 bit

Bitstream

48 kHz/20 bit

48 kHz/16 bit

48 kHz/20 bit

48 kHz/16 bit

48 kHz/20 bit

48 kHz/16 bit

48 kHz/20 bit

48 kHz/16 bit

48 kHz/20 bit

48 kHz/16 bit

48 kHz/20 bit

48 kHz/24 bit

48 kHz/16 bit

48 kHz/24 bit

48 kHz/16 bit

48 kHz/24 bit

48 kHz/16 bit

48 kHz/24 bit

96 kHz/16 bit

48 kHz/16 bit

96 kHz/16 bit

48 kHz/16 bit

96 kHz/20 bit

48 kHz/16 bit

48 kHz/20 bit

96 kHz/20 bit

48 kHz/16 bit

48 kHz/20 bit

96 kHz/24 bit

48 kHz/16 bit

48 kHz/24 bit

96 kHz/24 bit

48 kHz/16 bit

48 kHz/24 bit

DTS

Bitstream

MPEG1, MPEG2

Bitstream

48 kHz/16 bit

DVD video

Audio CDs

ÒPCMÓ

48 kHz/16 bit

Dolby Digital

discs

ÒAnalog 2chÓ

DIGITAL AUDIO ANALOG AUDIO DIGITAL AUDIO ANALOG AUDIO DIGITAL AUDIO ANALOG AUDIO

Linear PCM

Linear PCM 44.1 kHz/16 bit
DTS

48 kHz/16 bit

44.1 kHz/16 bit 44.1 kHz/16 bit
Bitstream

(Noise)

44.1 kHz/16 bit 44.1 kHz/16 bit 44.1 kHz/16 bit
Bitstream

(Noise)

Bitstream

44.1 kHz/16 bit
(Noise)

55
2A77001AE(52-57)

8/29/02, 11:06 AM

Status display of Disc
You can view information on the operation status and access the settings.

With each press of DISPLAY, the status of the disc will appear on the screen and change as follows.
Symbol mark of the feature
you selected is displayed.

DVD
T 2C 3

T 2C 3

0:08:16

-0:21:28

EAM
ZOOMEPM

EAM

T 1

PCM

OFF
BIT
RATE

T 1

T 2C3

9.2Mbps

EAM

2CH

IOOM
X

Press

EPM

EAM

2CH
IOOM
X

EAM

PCM

2CH

OFF
0:08:16

-03:38

EAM

IOOM
X

T 2C 3

T 1

00:30

EAM

T 1

01:14

----- CD TEXT ----Disc Title:
No Text
Track Title:
No Text

EAM

PCM

to select the desired symbol mark, then press ENTER.

T : Title number (Track number)
/
or Number keys to locate a title or
Press
track, then press PLAY.
: Elapsed (remaining) time of the current title
Press Number keys to locate a desired Location,
then press PLAY.
: Subtitle setting
See page 43.

C : Chapter number
/
or Number keys to locate a Chapter,
Press
then press PLAY.
Audio setting
See page 43.
: Angle setting
See page 44.

ZOOM

: To zoom a picture
See page 39.

: Audio Out Select setting
BST: Bitstream 2CH:Analog 2ch PCM:PCM
See page 52.

: To stop playback
See page 37.

: Playback starts from the beginning of the
current chapter or track.
See page 38.

: Fast reverse playback
See Page 38.

: To start playback
See page 37.

: Fast forward playback
See page 38.

: To locate succeeding chapters or tracks.
See page 38.

: To begin slow motion playback
See page 38.

: To pause playback
See page 38.

: To turn off the display
CD TEXT
Displays CD text data if included on the audio
CDs. (Some letters may not be displayed
properly depending on the disc.)

Data transfer rate (Mbit/s)
Amount of picture, sound and subtitle data in the DVD
video disc transferred per second.
The larger the value is, the more data processed, but
this does not necessarily insure better picture quality.

56
2A77001AE(52-57)

8/29/02, 11:06 AM

Table of languages
Abbreviation
–––
CHI (ZH)
DUT (NL)
ENG (EN)
FRE (FR)
GER (DE)
ITA (IT)
JPN (JA)
KOR (KO)
MAY (MS)
SPA (ES)
AA
AB
AF
AM
AR
AS
AY
AZ
BA
BE
BG
BH
BI
BN
BO
BR
CA
CO
CS
CY
DA
DZ
EL
EO
ET
EU
FA
FI
FJ
FO
FY
GA
GD
GL

Language
No alternate
language
Chinese
Dutch
English
French
German
ltalian
Japanese
Korean
Malay
Spanish
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Belorussian
Bulgarian
Bihari
Bislama
Bengali, Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Greek
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
Frisian
Irish
Scottish Gaelic
Galician

Abbreviation Language
GN
GU
HA
HI
HR
HU
HY
IA
IE
IK
IN
IS
IW
JI
JW
KA
KK
KL
KM
KN
KS
KU
KY
LA
LN
LO
LT
LV
MG
MI
MK
ML
MN
MO
MR
MT
MY
NA
NE
NO
OC
OM
OR
PA
PL
PS

Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Hebrew
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laotian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
(Afan) Oromo
Oriya
Panjabi
Polish
Pashto, Pushto

Abbreviation Language
PT
QU
RM
RN
RO
RU
RW
SA
SD
SG
SH
SI
SK
SL
SM
SN
SO
SQ
SR
SS
ST
SU
SV
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
TT
TW
UK
UR
UZ
VI
VO
WO
XH
YO
ZU

Portuguese
Quechua
Rhaeto-Romance
Kirundi
Rumanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sango
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tongan
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu

57
2A77001AE(52-57)

8/29/02, 11:06 AM

ENGLISH

Enter the appropriate code for the initial settings "Audio", "Subtitle" and/or "Menu" (see pages 47-49).

Problems and troubleshooting
Use the following check list for troubleshooting when you have problems with your unit. Consult your local
dealer or service outlet if problems persist.
Be sure all connections are properly made when using with other units.
SYMPTOMS

POSSIBLE SOLUTIONS

PAGE

DVD/VCR

DVD/VCR does not operate.

• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
• Select the DVD or VCR mode before operating.

5
–
–
5
18,36

No picture.

• Antenna connection is not correct or antenna cable is disconnected. 12~15
• The video channel is not in the correct position or the TV is not
18
set to the video channel 3 or 4.
• Check the unit is connected correctly.
12~17
• The video input selector of the TV is not set to VIDEO. Set to
–
VIDEO (or equivalent).
• Channel is set to the external mode.
–

No sound.

• Check the unit is connected correctly.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.

The remote control does not
function.

• Aim at the remote control at the remote sensor.
• Operate within Approx. 5 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
• Check the frequency code is set correctly.

No CATV reception

• Check all CATV connections.
• Station or CATV system problems, try another station.

14,15

TV recording does not work.

• The erase prevention tab of the video cassette is broken off.
• The unit is in the external input mode.

24,28

Timer recording does not work.

• The time is not set correctly.
• The recording start/end time is not set correctly.
• The TIMER has not been pressed ( is not lit).

19
31
31
26

Noise bars on screen.

• Tracking adjustment beyond range of automatic tracking circuit.
Try Manual tracking adjustment.
• Video heads are dirty.
• The tape is worn or damaged.

Display is not shown in your
language.

• Select proper language in the menu options.

Playback doesn’t start.

• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play DVD-ROMs, etc.

37
35
35

Stopping playback, slow-motion
play, repeat play, or memory play,
etc. cannot be performed.

• Some discs may not do some of the functions.
• When you press VCR MENU while watching a DVD with the
connections of the DVD exclusive terminal (S-VIDEO cable or
COMPONENT cable) to a TV, you cannot perform all the DVD
functions. In this case, wait for approx. 60 seconds with no
pressing of any buttons.

–
–

12~17
–
26,38

VCR

59
–

DVD

58
2A77001AE(58-BACK)

8/29/02, 11:05 AM

Problems and troubleshooting / Video head cleaning
POSSIBLE SOLUTIONS

PAGE

No 4:3 (16:9) picture

• The setup does not match your TV.

No on-screen display

• Select Display On.

No surround sound

• The setup does not match your stereo system.

The unit or remote operation key
is not functioning.

• Turn off the unit and unplug the AC power cord for several
minutes, then replug it.

–

• Check the Parental setup.

Playback does not start when the
title is selected.
Audio soundtrack and/or subtitle
language is not changed when
you play back a DVD.

• Multilingual language is not recorded on the DVD disc.

48,49

No subtitle

• Some discs have no subtitles.
• Subtitles are cleared. Press SUB TITLE.

Angle cannot be changed.

• Multi-angles are not recorded on the DVD disc.

• The function is prohibited with the unit or the disc.

–

appears on the screen.

ENGLISH

SYMPTOMS

Video head cleaning
Video head clogging
The video heads are the means by which the DVD/VCR reads
the picture from the tape during playback. In the unlikely event
that the heads become dirty enough to be clogged, no picture
will be played back. This can easily be determined if, during
playback of a known good tape, there is good sound, but no
picture (picture is extremely snowy). If this is the case, have
the DVD/VCR checked by qualified service personnel.

Good Picture

Snowy Picture

NOTES: • DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE
REAR COVER.
• Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
• To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.

FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMCORPINC.COM OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS
PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INT'L AT 1-800-321-6993.

59
2A77001AE(58-BACK)

8/29/02, 11:05 AM

Specifications
GENERAL
Power supply:
Power consumption:
Weight:
Dimensions:

AC 120V 60Hz
Operation: 20W
Stand by: 3W
9.9lbs (4.5 kg)
Width : 16-15/16 inches (430 mm)
Height : 3-7/8 inches (99 mm)
Depth : 12-3/8 inches (314.5 mm)

Inputs/Outputs:
Video:

In: 1Vp-p/75 ohm
Out: 1Vp-p/75 ohm
Audio:
In: –8dBm/50K ohm
Out: –8dBm/1K ohm
Antenna:
UHF/VHF IN/OUT: 75 ohm coaxial
Hi-Fi Frequency Response: 20Hz to 20,000Hz
Hi-Fi Dynamic Range:
More than 90dB
VCR section
Video Head:
Audio Track:
Tuner:

4 Rotary Heads
Hi-Fi Sound - 2 Tracks / MONO Sound - 1 Track
181 Channel Freq. Synthesized
VHF
2-13
UHF
14-69
CATV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
RF Channel Output:
Channel 3 or 4, Switchable
F.FWD/REW Time at 25˚C (77˚F): Approx. 1minute and 48 seconds (with T-120 Cassette Tape)
DVD section
Signal system:
Applicable disc:
Audio characteristics:
Frequency response:
S/N Ratio:
Harmonic distortion:
Wow and flutter:
Dynamic range:
Output:

Pickup:

ACCESSORIES:

NTSC
DVD (12cm, 8cm), CD (12cm, 8cm)
DVD: 4Hz - 22KHz
CD: 4Hz - 20KHz
90dB
0.01%
Below Measurable Level
90dB
Video : (RCA) 1 Vp-p/75ohm
Audio : (RCA) –8 dBm/1Kohm
Digital Audio : 0.5Vp-p/75 ohm
CD : Wavelength: 775 - 805 nm
Maximum output power: 0.5 mW
DVD : Wavelength: 640 - 660 nm
Maximum output power: 1.0 mW
Remote control x 1
75 ohm Coaxial Cable x 1
AUDIO/VIDEO Cable x 1

60
2A77001AE(58-BACK)

8/29/02, 11:05 AM

○

2A77001AE(58-BACK)

8/29/02, 11:05 AM

61
○

ENGLISH

Memo

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:08:29 11:26:05
Producer                        : Acrobat Distiller 3.0 for Power Macintosh
Modify Date                     : 2002:08:29 11:38:08+07:00
Page Count                      : 61

EXIF Metadata provided by EXIF.tools

Memorex Mvd4540 Users Manual

MVD4540 to the manual 78096723-800a-8a74-d16a-e28572636bad

Navigation menu

Versions of this User Manual:

Views

Navigation