| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3102182 |
| Application ID | Cy9KaoaQ3C/XIfcGXAHKMg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 398.61kB (4982677 bits) |
| Date Submitted | 2016-08-17 00:00:00 |
| Date Available | 2016-10-01 00:00:00 |
| Creation Date | 2017-12-12 18:50:32 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-12 18:50:32 |
| Document Title | MC601V.cdr |
| Document Creator | CorelDRAW |
| Document Author: | Administrator |
‘2 ®
merrg’rgk
Lighting Control Switch
MCBOiV
North America Version / Dimming Function
l Automatic switching or dimming when used in combination
wilh1-10Vdimmable LED drivers or ballasts.
I Built-in daylight sensor.
I 1 -1 OV Interface can match up with Merrytek stand-alone
daylight sensor M801 and achieve daylight harvesting.
l Compact slze makes It suitable to fix within most Iumlnalres.
l Detection area. time delay and daylight threshold can be
The MCGUiV innovative and active motion detectors with
HF system 5.86Hz. Motion can be detected through
plastic, glass and thin non-melal materials.
The sensors allow energy saving without compromising
comfort. When used In combination with i-lOV dimmable
LED drivers or ballasts. they can achieve 3-step dlmmlng
function. which Is perlect for use In some areas that
precisely set via DIP switch. requires a light change notice before totally switch off.
' Wide de‘ec‘im‘ area. range “9 ‘0 16’“ i” diameter. Also. the 1-10V interlace in the sensors can match up with
lSuoporthigher mounting hei9h|15m Max. Merryiek stand-alone daylight sensor M801. and
lOplionalsurtace mounting and base mounting implement daylight harvesting. means the lighting system
has automated controls that either turn off or dlm artificial
light In response to the available daylight In the space.
As it uses the third generation Merrytektechnology, normal
5.8GHZ microwave module can easily reach high mounting
high up to 15m and long detection area 10m in radius.
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user‘s authority to operate the equipment.
This device complies with part 15 ofthe FCC Rules. Operation is subject to the following two conditions:
(1 ) This device may not cause harmful interference,
(2) this device must accept any interference received. including interference that may cause
undesired operation.
IC RSS warning
This device complies with Industry Canada licence—exempt RSS standard (5). Operation is subject to
the following two conditions:
(1 ) this device may not cause interference
(2) this device must accept any interferencejncluding interference that may cause undesired
operation of the device.
Le present areil est conforme aux CNR d'lndustrie Canada Iicables aux areils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) I‘areil ne doit pas produire de brouillage, et
(2) I'utilisateur de I'appareil doit accepter tout brouillage radioéiectrique subi. méme si Ie brouillage
est susceptible d'en compromettre Ie fonctionnement.
R&TTE C € @
um»
Lighting Control Switch
‘2 ®
merrg’rgk
3—step dimming function
Lamps in corridor are controlled by several sensors. Once any motion is detected by one of sensors, the motion
slgnal will be transmltted to other sensors connected together, Then, all lamps swltch on at the same time, Instead
of switching on the lamps In the area where motlon Is detected.
No motlon detected,
all lamps switch off.
a Any movement is detected
from any dlrectlon. all lamps
synchronously switch on,
No motlon ls detected In
detection area, all lamps
synchronously dlm to a low
light level after hold time,
an After stand-by period. the
lamps switch off if no
movement ls detected In
the detection zone.
ltDAD ADAD
Elm DD UDEIEI mum on DUDE]
: H;- LN 7 «N- LN
luv r—wv
LED driver LED driver
Lighting Control Switch
‘2 ®
merrg’rgk
Motlon sensor MCSOIV + LED drlver or ballast (Any brand)
MCGO1V Is an Innovatlve motlon sensor, swltoh on the Ilghl on deteotlon of movement, and swltch off after a hold
tlme when there Is no motlon detected. As bulIt-In dayllght sensor can read brlghtness value, the sensor does not
swltch on the light If wlth surflclent natural Ilght.
With sultlclent light, the lamp Wlth Insufficlent amblent light, After held time, the sensor
doesn ‘t swltcn on, the sensor switches on the lamp switches oft the lamp when
when motion ”5 detected. no motlon ls detected.
Wlnng 5 me
7 0
Conllalqsar Controlueal mummy “aw
LL III?
E / m / , E
\m \m
ll ll
H rvest mg
When used In oomblnatlon with Merrytek dayllght sensor M801, the system has automated controls that elther
turn 0" or dim artlflclal light In response to the avallable dayllght In the space.
I i
Ambisnt light Waterman Ambient light below than The lamp Ilghts un100% lllumlnetlan er dlms to melnteln the preset lllumlnellun
press! Illumlnstlun Isvel press! Illumlnstlun level, have. 393m, me We. 0, Emma,“ "gm
(Set by l -1ov dayllgm the lamp swltches on
sensor), the lamp keeps when motlon Is detected.
on.
Lighting Control Switch
‘2 ®
merrg’rgk
If with sufficient ambient If with insufficient ambient light, the lamp dims to stand-by dimming level (Set in the motion
light, the lamp turns off sensor)when no motion detected ofterhold time, and then switches off after stand-by period.
at once.even with motion
trigger.
g scheme
._
i.
i.n
m.
z-
x.
r.
c .N
MIT ADAD ltDAD
mum on UL‘lDD
E if" L N
LED driver LED driver
etect on Patt
Wall mounting pattern (Unit: m) Ceiling mounting pattern (Unit: m)
Suggested Installation height: 1-1.8m Suggested Installation height: 2.5-10m
‘2 ®
merrg’rgk
Lighting Control Switch
Wm ignr zmwm
mum BMW“
use
M0601
Operating voltage 120-277Vae. souyeon
Rated capacitive load 1zovwoowma-240v¢soow;277vm ooow
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.6
Linearized : Yes
Encryption : Standard V4.4 (128-bit)
User Access : Print, Extract, Print high-res
Author : Administrator
Create Date : D:20160803090855Z
Modify Date : 0000:01:01 00:00:00
XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creation Date--Text :
Producer : Corel PDF Engine Version 14.0.0.653
Mod Date--Text :
Format : application/pdf
Creator : Administrator
Title : MC601V.cdr
Creator Tool : CorelDRAW
Metadata Date : 2016:08:15 22:22:26-07:00
Document ID : uuid:564961ee-1326-4fe3-a798-64fc4fd063cc
Instance ID : uuid:d4af2707-a2fd-4709-88b7-4831843fed67
Page Count : 5
EXIF Metadata provided by EXIF.tools