Meru Networks AP832E Dual Radio Access Point User Manual ap832

Meru Networks Inc. Dual Radio Access Point ap832

User Manual

Meru AP832Installation GuideCopyright © Meru Networks, Inc., 2003–2013. All rights reserved.Other names and brands may be claimed as the property of others.April 2013Document Number: 882-70013 Rev A Ver 2 AP832 Installation Guide
Safety Precautions © 2013 Meru Networks, Inc. Installing AP832e iii Chapter 2Installing AP832eThis chapter describes how to install and configure an AP832e. It contains the following sections:Safety PrecautionsUnpack the AP832eInstallation RequirementsInstall the AP832eCheck AP832e LED ActivityWhere to Go From HereSafety PrecautionsIMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating this product.If an optional power supply is used, it must be one supplied by Meru Networks.The AP832e is intended only for installation in Environment A as defined in IEEE 802.3af. All intercon-nected equipment must be contained within the same building, including the interconnected equip-ment's associated LAN connection.Unpack the AP832eConfirm that the AP832e shipping package contains these items:Warning! This product is intended to be supplied by a UL Listed power supply marked Class 2 or LPS and rated minimum 12Vdc, 2A. For Power over Ethernet, an 802.3af or 802.3at connection must be used.
iv Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Installation Requirements AP832eWall mount bracketTwo ceiling mount brackets (for varying sized ceiling structures)Six antennasScrews for the mounting bracketInstallation RequirementsAn array of holes on the mounting bracket allows the AP832e to be mounted on the wall and over junc-tion boxes or molly bolts. There are holes for passing the PoE Ethernet or external power supply cable through the bracket if the bracket is mounted on a junction box.The AP832e has a security cable slot so you can lock the AP832e with a standard security cable, such as those used to secure laptop computers.The AP832e ships with included ceiling and wall mounting brackets to be used for varying types of lcations, such as on T-bars or over junction boxes. For mounting above ceiling tiles, purchase optional mounting kits:Above Suspended Ceiling Mounting Kit (T-Bar Hanger): MNT-ASCMKITAbove hanging ceiling tiles. Suitable for use in environmental air space in accordance with the Section 832e-22(c) of the National Electric Code and Sections 2- 128.12 - 010 (3) and 12 - 100 of the Canadian Electrical Code. Part 1. C22. 1. Note that in order to comply with these standards, the plastic cover on the AP must be removed.Additional EquipmentA power source is needed to power the AP832e. The AP832e requires an 802.3af or 802.3at power source when operating with PoE. If this is not available, 12V DC power (2A rated) must be supplied.Antenna MappingsSee Table 1 to determine which radio is associated with each antenna.
Install the AP832e © 2013 Meru Networks, Inc. Installing AP832e v Table 1: Antenna MappingsInstall the AP832eSelect a LocationAttach the Provided AntennasInstall the Access PointSelect a LocationAll AP832e interconnected equipment, including the associated LAN connection, must be contained within the same building. In addition, the AP832e location should meet the following conditions:Relatively unobstructed access to the stations the AP serves. Select a location with minimal physical obstructions between the AP and the wireless stations. In an office with cubicles, mounting the APs below a hanging ceiling (plenum is supported) or the wall near the ceiling provides the least obstructed communications path. On a wall, orient the AP832e horizontally so that you can read the Meru logo without tilting your head at 90 degrees - this orientation provides optimum MIMO performance. Access to wall outlet or a to a Power over Ethernet (PoE) connection to the network switch servicing the controller. We recommend planning for about 256 clients per radio (or per interference region) if you plan to use Virtual Port and plan to have phones as clients. Refer to the Meru Deployment Guides on the support site for more information.AP832e is designed to provide 360 degree omni-directional coverage as illustrated below. Plan place-ment with this pattern in mind. Antenna Radio/Channel1Radio 12Radio 13Radio 14Radio 25Radio 26Radio 2
vi Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Install the AP832e Figure 1: Coverage Pattern for AP832e When Ceiling MountedMost installations receive the best coverage using the following guidelines:Install APs toward the center of the building.Place APs about 80 feet apart.Do not install APs near metal objects, such as heating ducts, metal doors, or electric service panels.Attach the Provided AntennasAll AP832es have six external antenna ports, labeled 1 - 6. These units operate with six antennas attached, even though some configurations don’t use all six. Instead of attaching an antenna, you can cap unused antenna connectors with 50 ohm Reverse Polarity SMA terminators. (For a list of approved terminators, see http://www.merunetworks.com/merusupport.) To achieve the best performance from your AP832e, position antennas at a 90 degree angle relative to each other. The antennas do not have to be oriented exactly as shown in the figure, but it is important to maintain the relative angles. If for some reason you are unable to maintain those angles, the network still operates, but you may experience up to 20% drop in throughput depending on the antenna orientation. Do not leave any antenna connectors unterminated. All connectors on the AP must be terminated with antennas or with 50 ohm Reverse Polarity SMA terminators. (For a list of approved terminators, see http://www.merunetworks.com/merusupport.The attached antennas must be the same model; if you replace one antenna, replace them all.Install the Access PointAP832e ships several different mounting bracket components to allow for a variety of mounting options. You can mount an AP832e in the following ways:Mount AP832e Horizontally on a Shelf Mount AP832e Vertically on a WallMount AP832e Below a Suspended CeilingMount AP832e on a Dropped Ceiling Bevel TileMount AP832e on an Interlude T-BarNote:When planning to operating multiple radios on the same band (i.e., 2 radios on the 2.4GHz band), it is important that the user reduce the transmit power for each radio by 3dBm from its default setting.ceilingfloor
Install the AP832e © 2013 Meru Networks, Inc. Installing AP832e vii Mount AP832e Above a Suspended CeilingMount AP832e Horizontally on a ShelfWhen mounting an AP832e horizontally, simply place it on the desired surface and connect power and network cables.Mount AP832e Vertically on a WallThe AP832 ships with a metal bracket that can be used to mount it on a wall. This bracket is used in conjunction with the plastic 650-00232 15/16" T-Bar Adapter/Wall Mount bracket to easily lock the AP into place.To mount an AP832e on a wall:1. Place the metal bracket against the wall. It should be oriented such that the indicator text for wall-mounting is pointing upwards (see Figure 2).Figure 2: AP832 Wall Bracket2. Attach the bracket to the wall using screws at the appropriate screw locations as indicated in Figure 2. Recommend #6, #8 (M3, M3.5).3. Locate the 650-00232 15/16" T-Bar Adapter/Wall Mount component and attach it to the raised screw locations on the Wall Mount plate. See Figure 3.Wall-mount screws
viii Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Install the AP832e Figure 3: Attaching the AP Mount to the Wall Mount4. Screw the plastic component into place on the metal bracket.5. Run the Ethernet and power cable (if using one) through the rectangular opening at the bottom of the Wall Mount bracket and connect them to their corresponding ports on the underside of the AP.6. Press the Receiving Slots on the underside of the AP (indicated below) to the corresponding tabs ("Mounting Pins") on the plastic bracket. See Figure 4.
Install the AP832e © 2013 Meru Networks, Inc. Installing AP832e ix Figure 4: Attaching the AP to the Wall Mount7. Slide the AP horizontally to lock the tabs into place.8. If not already connected, you may now connect the Ethernet cable and DC power (if used) and verify that the AP comes online.Mount AP832e Below a Suspended CeilingThe provided ceiling mounting brackets allow the AP832e to attach to suspended ceiling T-rails. The AP ships with two different ceiling mounting bracket options to accomodate varying sizes of ceiling T-rails. Be sure to attach the correctly-sized bracket to your AP prior to attempting to deploy it. Note that each plastic bracket contains descriptive text to indicate the ceiling T-rail size for which it is designed.To mount an AP832e below a suspended ceiling:1. Determine the location on the ceiling rail where the AP will be mounted and remove the ceiling tiles.2. Attach the AP to the mounting bracket by pressing the bracket’s Mounting Pins (shown in Figure 4) to the AP’s Receiving Slots and sliding the bracket until it locks in place.3. Press the AP and bracket against the rail and twist to lock it into place.Note:Figure 4 shows an AP832i model being attached to the bracket, but the process is identical for either AP.
xMeru Access Point Installation Guide © 2013 Meru Networks, Inc. Install the AP832e 4. Connect one end of the CAT5 (or greater) Ethernet cable with PoE to the 100/1000 Ethernet connector on the underside of the AP.5. Verify that the AP comes online and then replace the ceiling tiles removed in Step 1.Mount AP832e on a Dropped Ceiling Bevel TileThe mounting procedure for a ceiling that has recessed supports and lowered tiles is similar to that of mounting on a suspended ceiling. However, this procedure requires a specialized mounting bracket (MNT-SCRMKIT-03), as shown in Figure 5.Figure 5: Dropped Bevel Tile Mounting Bracket1. Remove the ceiling tile alongside which the AP will be mounted.2. Locate the 650-00232 15/16" T-Bar Adapter/Wall Mount and attach the AP to the mounting bracket by pressing the bracket’s Mounting Pins (shown in Figure 4) to the AP’s Receiving Slots and sliding the bracket until it locks in place.3. Push down on the thumbscrews provided on the mounting bracket and clip it to the ceiling bar that will support the AP.4. Tighten the screws to ensure that the mechanism stays locked in place.5. Gently press the underside of the AP (with bracket attached) against the Dropped Bevel Tile Mounting bracket indicated above and twist to lock them together.6. Connect one end of the CAT5 (or greater) Ethernet cable with PoE to the 100/1000 Ethernet connector on the underside of the AP.7. Verify that the AP comes online and then replace the ceiling tiles removed in Step 1.
Install the AP832e © 2013 Meru Networks, Inc. Installing AP832e xi Mount AP832e on an Interlude T-BarThe mounting procedure for a ceiling that has interlude T-Bar supports is similar to that of mounting on a suspended ceiling. However, this procedure requires a specialized mounting bracket (MNT-SCRMKIT-04), as depicted in Figure 6.Figure 6: T-Bar Mounting Bracket1. Remove the ceiling tile alongside which the AP will be mounted.2. Locate the 650-00232 15/16" T-Bar Adapter/Wall Mount and attach the AP to the mounting bracket by pressing the bracket’s Mounting Pins (shown in Figure 4) to the AP’s Receiving Slots and sliding the bracket until it locks in place.3. Push down on the thumbscrews provided on the mounting bracket and clip it to the ceiling bar that will support the AP.4. Tighten the screws to ensure that the mechanism stays locked in place.5. Gently press the underside of the AP (with bracket attached) against the T-Bar Mounting bracket indicated above and twist to lock them together.6. Connect one end of the CAT5 (or greater) Ethernet cable with PoE to the 100/1000 Ethernet connector on the underside of the AP.7. Verify that the AP comes online and then replace the ceiling tiles removed in Step 1.Mount AP832e Above a Suspended CeilingNote:AP832e is not plenum-rated and should only be mounted above ceilings in non-plenum air space, such as a return airflow for air conditioning.
xii Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Install the AP832e Use the optional T-bar box hanger mounting kit to mount AP832e above suspended ceiling T-rails. The installation attaches the T-bar box hanger to the ceiling rails and then the AP832e attaches to the T-bar box hanger. Note that AP832e mounted above the ceiling has about 2-3 dBm less RF coverage than AP832e mounted under the ceiling.You may need to modify thicker tiles to support this installation.To mount an AP832e above the ceiling with the optional T-bar kit, follow these steps:1. Determine the location on the ceiling rails where the AP will be mounted and remove the ceiling tile.2. Unpack the T-bar hanger kit.3. Attach the mounting bar (depicted in Figure 7) to the mounting brace (which looks like a small handle) with the crossbar of the mounting kit sandwiched between them. See Figure 8.Figure 7: Mounting BarWarning! When installed in air-handling spaces, such as above a suspended ceiling, power the AP832e only with a PoE, not a power supply.
Install the AP832e © 2013 Meru Networks, Inc. Installing AP832e xiii Figure 8: Assembled Mounting Bracket4. Locate the 650-00232 15/16" T-Bar Adapter/Wall Mount and attach the AP to the mounting bracket by pressing the bracket’s Mounting Pins (shown in Figure 4) to the AP’s Receiving Slots and sliding the bracket until it locks in place.5. Gently press the underside of the AP against the mounting brace and rotate it into place until the locking mechanism clicks.6. Attach the legs for the mounting kit to the T-Bars in the ceiling by sliding the clips down onto each respective bar.7. Remove the top nut from each leg.8. Lower the crossbar (with the AP attached) onto the legs and screw the nuts back on top of the bar.9. Connect one end of the PoE Ethernet cable to the Ethernet connector on the AP.Check that the AP832e is operating correctly before replacing the ceiling tile to the ceiling. Verify correct operation using the LEDs, as shown in Check AP832e LED Activity.Note:Use a shielded Cat 5e (or greater) Ethernet cable in order to comply with international electromagnetic emissions limits.00624Mounting BraceMounting BarClips attach to T-bar
xiv Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Check AP832e LED Activity Check AP832e LED ActivityWhen AP832e first connects to the controller (and any time the access point is rebooted), the AP initializes and then is programmed by the controller. When the AP first powers up, the LED is green. Thereafter, its color indicates its operating status.Figure 9: AP832e Status LEDAfter the AP832e is connected, check the status of the LED. Its indicator state is described below.00249LEDsStatus
Check AP832e LED Activity © 2013 Meru Networks, Inc. Installing AP832e xv AP832e LED DescriptionChange LED Appearance If you want to change the appearance of the LEDS, follow these steps:1. From the controller, click Configuration > Devices > AP, and then select the AP.2. Select one of these settings for the LED Mode setting:—Normal: LEDs are as described above—Blink: Sets all LEDs flashing; this is useful to locate an AP—Dark: Turns off all LEDs3. Click OK.LED Color State:StatusoffAP is off - either there is no power or the LEDs are set to Off on the controller. Check the LED setting on the controller by clicking Configuration > Devices > AP, selecting the AP and then checking the setting for LED Mode. cyan AP is booting stage 1.green blinking AP is booting stage 2.green/white alternating AP is discovering the controller.green/blue alternating AP is downloading a configuration from the controller. slow blue blinking AP is online and enabled.rapid blue blinking AP is online and enabled and there is activity on one or both radios.red/yellow alternating Some AP failure occurred; check the controller for more details about the alarm by clicking Monitor > Alarms > Pending Alarms.blue/yellow alternating AP is online and enabled and one or both radios are either scanning or an admin has taken the radio(s) down.
xvi Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Where to Go From Here Where to Go From HereNow that the AP832e is installed, go to the Meru System Director Getting Started Guide for instructions on initializing the hardware. Return to this chapter to check the status of the LEDs once the WLAN is operational.
Safety Precautions © 2013 Meru Networks, Inc. Installing AP832i xvii Chapter 3Installing AP832iAP832i is supported by System Director versions 5.3 and greater. This chapter describes how to install and configure an AP832i. It contains the following sections:Safety PrecautionsUnpack the AP832iInstalling AP832iCheck AP832i LED ActivityWhere to Go From HereSafety PrecautionsIMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating this product.If an optional power supply is used, it must be one supplied by Meru Networks.The AP832i is only intended for installation in Environment A as defined in IEEE 802.3af. All intercon-nected equipment must be contained within the same building, including the interconnected equip-ment's associated LAN connection.Warning! This product is intended to be supplied by a UL Listed power supply marked Class 2 or LPS and rated minimum 12Vdc, 2A. For Power over Ethernet, an 802.3af or 802.3at connection must be used.
xviii Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Unpack the AP832i Unpack the AP832iConfirm that the shipping box contains the following:AP832iWall mount bracketTwo ceiling mount brackets (for varying sized ceiling structures)Screws for the mounting bracket12V power adapterAdditional EquipmentA power source is needed to power the AP832i. The AP832i requires an 802.3af or 802.3at power source when operating with PoE. If this is not available, 12V DC power (2A rated) must be supplied.Installing AP832iSelect a LocationAll AP832i interconnected equipment must be contained within the same building, including the inter-connected equipment's associated LAN connection. Ceiling mounting is recommended but wall mounting is also supported. In addition, the AP832i should be mounted in a location that meets the following conditions:Relatively unobstructed access to the stations the AP serves. Select a location with minimal physical obstructions between the AP and the wireless stations. In an office with cubicles, mounting the APs below a hanging ceiling (plenum is supported) or the wall near the ceiling provides the least obstructed communications path. On a wall, orient the AP832i horizontally so that you can read the Meru logo without tilting your head at 90 degrees - this orientation provides optimum MIMO performance. We recommend planning for about 50 clients per radio (or per interference region) if you plan to use Virtual Port and plan to have phones as clients. For a data-only installation, plan up to 128 clients per radio, meaning 256 for AP832i. Refer to the Meru Deployment Guides on the support site for more information. Access to wall outlet or a to a Power over Ethernet (PoE) connection to the network switch servicing the controller. AP832i is designed to provide 180 degree omni-directional coverage as illustrated below. Plan place-ment with this pattern in mind.
Installing AP832i © 2013 Meru Networks, Inc. Installing AP832i xix Figure 10: Coverage Pattern for AP832i When Ceiling MountedMost installations receive the best coverage using the following guidelines:Install APs toward the center of the building.Place APs about 80 feet apart.Do not install APs near metal objects, such as heating ducts, metal doors, or electric service panels.If you install AP832i on a pole, keep in mind that coverage will be 180 degrees. Do not mount two AP832is back to back on a pole to achieve 360 degree coverage, however, because the two units could interfere with each other.Install the Access PointAP832i ships several different mounting bracket components to allow for a variety of mounting options. You can mount an AP832i in the following ways:Mount AP832i Horizontally on a Shelf Mount AP832i Vertically on a WallMount AP832i Below a Suspended CeilingMount AP832i on a Dropped Ceiling Bevel TileMount AP832i on an Interlude T-BarMount AP832i Above a Suspended CeilingMount AP832i Horizontally on a ShelfWhen mounting an AP832i horizontally, simply place it on the desired surface and connect power and network cables.Mount AP832i Vertically on a WallThe AP832 ships with a metal bracket that can be used to mount it on a wall. This bracket is used in conjunction with the plastic 650-00232 15/16" T-Bar Adapter/Wall Mount bracket to easily lock the AP into place.To mount an AP832i on a wall:1. Place the metal bracket against the wall. It should be oriented such that the indicator text for wall-mounting is pointing upwards (see Figure 11).Note:When planning to operating multiple radios on the same band (i.e., 2 radios on the 2.4GHz band), it is important that the user reduce the transmit power for each radio by 3dBm from its default setting.ceilingfloor
xx Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Installing AP832i Figure 11: AP832 Wall Bracket2. Attach the bracket to the wall using screws at the appropriate screw locations as indicated in Figure 11. Recommend #6, #8 (M3, M3.5).3. Locate the 650-00232 15/16" T-Bar Adapter/Wall Mount component and attach it to the raised screw locations on the Wall Mount plate. See Figure 12.Figure 12: Attaching the AP Mount to the Wall Mount4. Screw the plastic component into place on the metal bracket.Wall-mount screws
Installing AP832i © 2013 Meru Networks, Inc. Installing AP832i xxi 5. Run the Ethernet and power cable (if using one) through the rectangular opening at the bottom of the Wall Mount bracket and connect them to their corresponding ports on the underside of the AP.6. Press the Receiving Slots on the underside of the AP (indicated below) to the corresponding tabs ("Mounting Pins") on the plastic bracket. See Figure 13.Figure 13: Attaching the AP to the Wall Mount7. Slide the AP horizontally to lock the tabs into place.8. If not already connected, you may now connect the Ethernet cable and DC power (if used) and verify that the AP comes online.Mount AP832i Below a Suspended CeilingThe provided ceiling mounting brackets allow the AP832i to attach to suspended ceiling T-rails. The AP ships with two different ceiling mounting bracket options to accomodate varying sizes of ceiling T-rails. Be sure to attach the correctly-sized bracket to your AP prior to attempting to deploy it. Note that each plastic bracket contains descriptive text to indicate the ceiling T-rail size for which it is designed.To mount an AP832i below a suspended ceiling:1. Determine the location on the ceiling rail where the AP will be mounted and remove the ceiling tiles.2. Attach the AP to the mounting bracket by pressing the bracket’s Mounting Pins (shown in Figure 13) to the AP’s Receiving Slots and sliding the bracket until it locks in place.3. Press the AP and bracket against the rail and twist to lock it into place.
xxii Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Installing AP832i 4. Connect one end of the CAT5 (or greater) Ethernet cable with PoE to the 100/1000 Ethernet connector on the underside of the AP.5. Verify that the AP comes online and then replace the ceiling tiles removed in Step 1.Mount AP832i on a Dropped Ceiling Bevel TileThe mounting procedure for a ceiling that has recessed supports and lowered tiles is similar to that of mounting on a suspended ceiling. However, this procedure requires a specialized mounting bracket (MNT-SCRMKIT-03), as shown in Figure 14.Figure 14: Dropped Bevel Tile Mounting Bracket1. Remove the ceiling tile alongside which the AP will be mounted.2. Locate the 650-00232 15/16" T-Bar Adapter/Wall Mount and attach the AP to the mounting bracket by pressing the bracket’s Mounting Pins (shown in Figure 13) to the AP’s Receiving Slots and sliding the bracket until it locks in place.3. Push down on the thumbscrews provided on the mounting bracket and clip it to the ceiling bar that will support the AP.4. Tighten the screws to ensure that the mechanism stays locked in place.5. Gently press the underside of the AP (with bracket attached) against the Dropped Bevel Tile Mounting bracket indicated above and twist to lock them together.6. Connect one end of the CAT5 (or greater) Ethernet cable with PoE to the 100/1000 Ethernet connector on the underside of the AP.7. Verify that the AP comes online and then replace the ceiling tiles removed in Step 1.
Installing AP832i © 2013 Meru Networks, Inc. Installing AP832i xxiii Mount AP832i on an Interlude T-BarThe mounting procedure for a ceiling that has interlude T-Bar supports is similar to that of mounting on a suspended ceiling. However, this procedure requires a specialized mounting bracket (MNT-SCRMKIT-04), as depicted in Figure 15.Figure 15: T-Bar Mounting Bracket1. Remove the ceiling tile alongside which the AP will be mounted.2. Locate the 650-00232 15/16" T-Bar Adapter/Wall Mount and attach the AP to the mounting bracket by pressing the bracket’s Mounting Pins (shown in Figure 13) to the AP’s Receiving Slots and sliding the bracket until it locks in place.3. Push down on the thumbscrews provided on the mounting bracket and clip it to the ceiling bar that will support the AP.4. Tighten the screws to ensure that the mechanism stays locked in place.5. Gently press the underside of the AP (with bracket attached) against the T-Bar Mounting bracket indicated above and twist to lock them together.6. Connect one end of the CAT5 (or greater) Ethernet cable with PoE to the 100/1000 Ethernet connector on the underside of the AP.7. Verify that the AP comes online and then replace the ceiling tiles removed in Step 1.Mount AP832i Above a Suspended CeilingNote:AP832i is not plenum-rated and should only be mounted above ceilings in non-plenum air space, such as a return airflow for air conditioning.
xxiv Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Installing AP832i Use the optional T-bar box hanger mounting kit to mount AP832i above suspended ceiling T-rails. The installation attaches the T-bar box hanger to the ceiling rails and then the AP832i attaches to the T-bar box hanger. Note that AP832i mounted above the ceiling has about 2-3 dBm less RF coverage than AP832i mounted under the ceiling.You may need to modify thicker tiles to support this installation.To mount an AP832i above the ceiling with the optional T-bar kit, follow these steps:1. Determine the location on the ceiling rails where the AP will be mounted and remove the ceiling tile.2. Unpack the T-bar hanger kit.3. Attach the mounting bar (depicted in Figure 16) to the mounting brace (which looks like a small handle) with the crossbar of the mounting kit sandwiched between them. See Figure 17.Figure 16: Mounting BarWarning! When installed in air-handling spaces, such as above a suspended ceiling, power the AP832i only with a PoE, not a power supply.
Installing AP832i © 2013 Meru Networks, Inc. Installing AP832i xxv Figure 17: Assembled Mounting Bracket4. Locate the 650-00232 15/16" T-Bar Adapter/Wall Mount and attach the AP to the mounting bracket by pressing the bracket’s Mounting Pins (shown in Figure 13) to the AP’s Receiving Slots and sliding the bracket until it locks in place.5. Gently press the underside of the AP against the mounting brace and rotate it into place until the locking mechanism clicks.6. Attach the legs for the mounting kit to the T-Bars in the ceiling by sliding the clips down onto each respective bar.7. Remove the top nut from each leg.8. Lower the crossbar (with the AP attached) onto the legs and screw the nuts back on top of the bar.9. Connect one end of the PoE Ethernet cable to the Ethernet connector on the AP.Check that the AP832i is operating correctly before replacing the ceiling tile to the ceiling. Verify correct operation using the LEDs, as shown in Check AP832i LED Activity.Note:Use a shielded Cat 5e (or greater) Ethernet cable in order to comply with international electromagnetic emissions limits.00624Mounting BraceMounting BarClips attach to T-bar
xxvi Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Check AP832i LED Activity Check AP832i LED ActivityWhen AP832i first connects to the controller (and any time the access point is rebooted), the AP initial-izes and then is programmed by the controller. When the AP first powers up, the LED is green. There-after, its color indicates its operating status.Figure 18: AP832i Status LEDAfter the AP832i is connected, check the status of the LED. Its indicator state is described below.00249LEDsStatus
Check AP832i LED Activity © 2013 Meru Networks, Inc. Installing AP832i xxvii AP832i LED DescriptionChange LED Appearance If you want to change the appearance of the LEDS, follow these steps:1. From the controller, click Configuration > Devices > AP, and then select the AP.2. Select one of these settings for the LED Mode setting:—Normal: LEDs are as described above—Blink: Sets all LEDs flashing; this is useful to locate an AP—Dark: Turns off all LEDs3. Click OK.LED Color State:StatusoffAP is off - either there is no power or the LEDs are set to Off on the controller. Check the LED setting on the controller by clicking Configuration > Devices > AP, selecting the AP and then checking the setting for LED Mode. cyan AP is booting stage 1.green blinking AP is booting stage 2.green/white alternating AP is discovering the controller.green/blue alternating AP is downloading a configuration from the controller. slow blue blinking AP is online and enabled.rapid blue blinking AP is online and enabled and there is activity on one or both radios.red/yellow alternating Some AP failure occurred; check the controller for more details about the alarm by clicking Monitor > Alarms > Pending Alarms.blue/yellow alternating AP is online and enabled and one or both radios are either scanning or an admin has taken the radio(s) down.
xxviiiMeru Access Point Installation Guide © 2013 Meru Networks, Inc. Where to Go From Here Where to Go From HereNow that the AP832i is installed, go to the Meru System Director Getting Started Guide for instructions on initializing the hardware. Return to this chapter to check the status of the LEDs once the WLAN is operational.
Cautions © 2013 Meru Networks, Inc. Cautions and Warnings xxixAppendix ACautions and WarningsThe cautions and warnings that appear in this manual are listed below in English, German, French, and Spanish. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.CautionsA Caution calls your attention to a possible hazard that can damage equipment. "Vorsicht” weist auf die Gefahr einer möglichen Beschädigung des Gerätes in.Une mise en garde attire votre attention sur un risque possible d'endommagement de l'équipement. Ci-dessous, vous trouverez les mises en garde utilisées dans ce manuel.Un mensaje de precaución le advierte sobre un posible peligro que pueda dañar el equipo. Las siguientes son precauciones utilizadas en este manual.Caution!When changing the orientation of the antennas, be sure to slightly loosen the knurled ring before moving the antenna. Retighten the ring afterward. Otherwise, you might damage the internal cabling in the AP.Vorsicht!Bei einer Neuausrichtung der Antennen muss vor Bewegung der Antenne der Rändelring leicht gelockert werden. Anschließend den Ring wieder festziehen. Anderenfalls können die internen Kabel im AP beschädigt werden.Mise en gardeEn cas de modification d’orientation des antennes, veiller à desserrer légèrement la bague moletée avant de réorienter l’antenne. Resserrer ensuite la bague, faute de quoi le câblage interne du point d’accès pourrait être endommagé.Precaución!Al cambiar la orientación de las antenas, asegúrese de aflojar ligeramente el anillo estriado antes de mover la antena. Luego vuelva a apretar el anillo. De otro modo, podría dañar el cableado interno del punto de acceso.
xxx Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Cautions Caution!Be sure to connect the Ethernet cable to the Ethernet port; the cable can mistakenly be plugged into the Console port.Vorsicht!Darauf achten, dass das Ethernetkabel am Ethernetanschluss und nicht versehentlich am Konsolenanschluss angeschlossen wird.Mise en gardeVeiller à bien connecter le câble Ethernet au port Ethernet et non pas au port Console.Precaución!Asegúrese de conectar el cable Ethernet al puerto Ethernet, porque por error se puede enchufar en el puerto de la consola.Caution!The radiated output power of the access points is well below the FCC radio frequency exposure limits. However, the Meru Access Point should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 20 cm between you (or any other person in the vicinity) and the Access Point antennas.Vorsicht!Die abgestrahlte Ausgangsleistung von Geräten von Meru Networks, Inc. liegt weit unter den Hochfrequenz-Expositionsgrenzwerten der FCC. Die Meru Access Point Zugangspunkte von Meru Networks, Inc. sollten jedoch so verwendet werden, dass das Potenzial für Kontakt mit Menschen während des normalen Betriebs auf ein Mindestmaß beschränkt wird. Um die Möglichkeit einer Überschreitung der FCC-Hochfrequenz-Expositionsgrenzwerte zu vermeiden, ist ein Abstand von mindestens 20 cm zwischen Ihnen (bzw. einer anderen Person in der Nähe) und den Zugangspunkt-Antennen zu wahren.Mise en gardeLa puissance de rayonnement émise par les équipements Meru Networks, Inc. est très inférieure aux limites d'exposition aux fréquences radio définies par la FCC. Toutefois, les points d'accès de la série Meru Access Point de Meru Networks, Inc. doivent être utilisés de façon à éliminer tout risque de contact humain en fonctionnement normal. Pour éviter de dépasser les limites d'exposition aux fréquences radio définies par la FCC, il est impératif de préserver en permanence une distance supérieure ou égale à 20 cm entre l'utilisateur (ou toute personne se trouvant à proximité) et les antennes du point d'accès.Precaución!La potencia de radiación de los dispositivos de Meru Networks, Inc. está muy por debajo de los límites de exposición a radiofrecuencia estipulados por la FCC. No obstante, los puntos de acceso de la serie Meru Access Point de Meru Networks, Inc. deben usarse de tal manera que se minimice la posibilidad de contacto para el usuario durante la operación normal. Para evitar la posibilidad de exceder los límites de exposición a radiofrecuencia establecidos por la FCC, el usuario (o cualquier otra persona en torno) debe mantenerse a una distancia de al menos 20 cm respecto a las antenas del punto de acceso.
Warnings © 2013 Meru Networks, Inc. Cautions and Warnings xxxiWarningsA warning calls your attention to a possible hazard that can cause injury or death. The following are the warnings used in this manual."Achtung" weist auf eine mögliche Gefährdung hin, die zu Verletzungen oder Tod führen können. Sie finden die folgenden Warnhinweise in diesem Handbuch:Un avertissement attire votre attention sur un risque possible de blessure ou de décès. Ci-dessous, vous trouverez les avertissements utilisés dans ce manuel.Una advertencia le llama la atención sobre cualquier posible peligro que pueda ocasionar daños personales o la muerte. A continuación se dan las advertencias utilizadas en este manual.Caution!Exposure to Radio Frequency Radiation.The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit an RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website http://www.hc-sc.gc.ca/rpb. Vorsicht!Exposure to Radio Frequency Radiation.The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit an RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's website http://www.hc-sc.gc.ca/rpb.Mise en gardeExposition aux rayonnements à fréquence radioélectriqueL'installateur de cet équipement radio doit veiller à positionner et orienter l'antenne de telle sorte qu'elle n'émette pas un champ radioélectrique supérieur aux limites définies par Santé Canada pour la population générale. Consulter le Code de sécurité n° 6, disponible sur le site Web de Santé Canada à l'adresse http://www.hc-sc.gc.ca/rpb. Precaución!Exposición a la radiación de radiofrecuencia.El instalador de este equipo de radio debe cerciorarse de que la antena está local-izada u orientada de tal manera que no emita un campo de radiofrecuencia superior a los límites estipulados por Health Canada para la población; consulte el Código de Seguridad 6 que podrá encontrar en el página web de Health Canada, http://www.hc-sc.gc.ca/rpb.
xxxiiMeru Access Point Installation Guide © 2013 Meru Networks, Inc. Warnings Warning! With plastic covers removed, this product is suitable for use in environmental air space in accordance with the Section 300-22(c) of the National Electric Code and Sections 2- 128.12 - 010 (3) and 12 - 100 of the Canadian Electrical Code. Part 1. C22. 1. For other countries, consult local authorities for regulations.Achtung! Bei abgenommener Kunststoffabdeckung ist dieses Produkt zur Verwendung in einem Umgebungsluftraum gemäß Abschnitt 300-22(c) des National Electric Code und Abschnitt 2- 128.12 - 010 (3) und 12 - 100 des Canadian Electrical Code Teil 1. C22.1 geeignet. Die Vorschriften für andere Länder sind bei den örtlichen Behörden erhältlich.AvertissementSous réserve que ses couvercles de plastique soient déposés, cet appareil est adapté à une utilisation dans les vides de construction des bâtiments selon la section 300-22(c) du code NEC (National Electric Code) et les sections 2- 128.12 - 010 (3) et 12 - 100 du Code électrique du Canada, partie 1. C22. 1. Pour tous les autres pays, consulter les organismes de réglementation locaux.AdvertenciaUna vez desprendidas las cubiertas de plástico, este producto es adecuado para su uso en el espacio aéreo circundante en conformidad con la sección 300-22(c) del National Electric Code (Código Eléctrico Nacional de EE.UU.) y las secciones 2- 128.12 - 010 (3) y 12 - 100 del Código Eléctrico de Canadá. Parte 1. C22. 1. En otros países, consulte a las autoridades locales competentes para informarse acerca de las normativas vigentes.Warning! Any Fast Ethernet (FE) cables installed in air-handling spaces should be suitable under NEC Article 800.50 and marked accordingly for use in plenums and air-handling spaces with regard to smoke propagation, such as CL2-P, CL3-P, MPP (Multi Purpose Plenum), or CMP (Communications Plenum).Achtung! Alle Fast-Ethernet (FE)-Kabel, die in Lüftungsräumen installiert werden, sollten gemäß NEC Artikel 800.50 geeignet sein und entsprechend zur Verwendung in Hohlräumen (Plenum) und Lüftungsräumen im Hinblick auf Rauchausbreitung gekennzeichnet sein, z.B. CL2-P, CL3-P, MPP (Multi Purpose Plenum) oder CMP (Communications Plenum).AvertissementLes câbles Fast Ethernet (FE) installés dans un vide d’air doivent correspondre aux critères de l’article 800.50 du code NEC et identifiés en conséquence comme adaptés à une utilisation dans les vides de construction des bâtiments en matière de propagation de la fumée (marquages CL2-P, CL3-P, MPP (Multi Purpose Plenum) ou CMP (Communications Plenum)).AdvertenciaTodos los cables Fast Ethernet (FE) instalados en espacios aéreos deben cumplir con el artículo 800.50 del NEC y estar marcados adecuadamente para su uso en espacios aéreos y plenums en lo concerniente a la propagación de humo, tales como CL2-P, CL3-P, MPP (Plenum multifuncional), o CMP (Plenum de comunicaciones).
Warnings © 2013 Meru Networks, Inc. Cautions and Warnings xxxiiiWarning! Inside antennas must be positioned to observe minimum separation of 20 cm. (~ 8 in.) from all users and bystanders. For the protection of personnel working in the vicinity of inside (downlink) antennas, the following guidelines for minimum distances between the human body and the antenna must be observed. The installation of the indoor antenna must be such that, under normal conditions, all personnel cannot come within 20 cm. (~ 8.0 in.) from any inside antenna. Exceeding this minimum separation will ensure that the employee or bystander does not receive RF-exposure beyond the Maximum Permissible Exposure according to FCC CFR 47, section 1.1310 i.e. limits for General Population/Uncontrolled Exposure.Achtung! Innenantennen müssen so positioniert werden, dass ein Mindestabstand von 20 cm (ca. 8 Zoll) zu allen Benutzern und anderen Personen gewahrt wird. Zum Schutz von Personal, das in der Nähe von Innenantennen (Downlink) arbeitet, sind die folgenden Richtlinien für Mindestabstand zwischen dem menschlichen Körper und der Antenne zu beachten. Die Innenantenne muss so installiert werden, dass sich unter normalen Bedingungen kein Personal bis auf weniger als 20 cm (ca. 8 Zoll) an eine Innenantenne annähern kann. Durch Überschreitung dieses Mindestabstands wird sichergestellt, dass Mitar-beiter oder andere Personen keiner RF-Exposition über die maximal zulässige Expo-sition (MPE; Maximum Permissible Exposure) gemäß FCC CFR 47, Abschnitt 1.1310 (Grenzwerte für die allgemeine Bevölkerung/unkontrollierte Exposition) ausgesetzt werden.AvertissementLes antennes intérieures doivent être positionnées de façon à respecter une distance minimum de 20 cm par rapport aux utilisateurs et aux tiers. Pour la protection du personnel travaillant à proximité des antennes intérieures (liaison descendante), respecter les directives suivantes pour assurer des distances minimales entre les êtres humains et les antennes. Toute antenne intérieure doit être installée de telle sorte que, dans des conditions normales, le personnel ne puisse s'en approcher à moins de 20 cm. Cette distance minimale est destinée à garantir qu'un employé ou un tiers ne sera pas exposé à un rayonnement radioélectrique supérieur à la valeur maximale autorisée, telle qu'elle est définie dans les limites d'exposition non contrôlées pour la population par la réglementation de la FCC CFR 47, section 1.1310.AdvertenciaLas antenas interiores deben colocarse de manera que se observe una separación mínima de 20 cm. (~ 8 pulg.) respecto a todos los usuarios y circunstantes. Para la protección del personal que trabaje en las inmediaciones de las antenas interiores (receptoras), deben observarse las siguientes directrices relativas a la distancia mínima entre el cuerpo humano y la antena. La instalación de la antena interior debe efectuarse de tal modo que, en condiciones normales, ningún miembro del personal pueda acercarse a menos de 20 cm. (~ 8,0 pulg.) de cualquier antena interior. El cumplimiento de este mínimo de separación asegura que el empleado o circunstante no recibirá exposición a radiofrecuencia por encima de la Exposición Máxima Permisible conforme a la normativa FCC CFR 47, sección 1.1310, es decir, los límites asignados a la Exposición Incontrolada/Población Civil.
xxxivMeru Access Point Installation Guide © 2013 Meru Networks, Inc. Warnings
Approved Antennas © 2013 Meru Networks, Inc. Regulatory Information xxxvAppendix BRegulatory InformationThe Meru Access Point (APs) must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. For country-specific approvals, see below. Meru Networks, Inc. is not responsible for any radio or television interference caused by unauthorized modifi-cation of APs, or the substitution or attachment of connecting cables and equipment other than that specified by Meru Networks, Inc. The correction of interference caused by such unauthorized modification, substitution or attachment is the respon-sibility of the user. Meru Networks, Inc. and its authorized resellers or distributors are not liable for any damage or violation of government regulations that may arise from the user failing to comply with these guidelines.Approved AntennasOnly approved antennas may be used in conjunction with AP832 access points. The following antennas are approved for use with the AP832 series.Part Numbers Manufacturer Gain DescriptionMeru ManufacturerANT-ABGN23O-W SOCAA 2/3 Dual-band omnidirectional dipoleANT-ABGN23O-W S24493TS Laird Technologies 3/4 Dual-band ceiling mount omnidirectional 3-leadANT-6ABGN-24 M6025040MO1D3620P Terrawave 2.5/4 dBi Dual-band ceiling mount omnidirectional 6-leadANT-ABGN47O ANT-DB1-RAF-RPS Linx Technologies 4.7/4.7 dBi Dual-band high gain dipole omnidirectionalANT-O6ABGN-0606-O M6060060MO1D3620O Terrawave 6/6 dBi Dual band omnidirectional 6-leadANT-I2ABGN-0304-O M6030040O1D3620DP Terrawave 3/4 dBi Dual-band ceiling mount omnidirectional 2-lead
xxxviMeru Access Point Installation Guide © 2013 Meru Networks, Inc. Regulatory Specifications Regulatory SpecificationsRadioFCC Part 15Canada RSS210EN 300 328 V1.6.1 (11/2004)EN 301 893 V1.3.1 (08/2005)Japan Technical RegulationsEMCFCC Part 15EN 301 489-17 V1.2.1 (08/2002)Japan VCCISafetyProlonged exposure to RF radiation can be hazardous. Switch off unit power before service or installation procedures.Limits for Occupational/Controlled ExposureANT-I3ABGN-0304-O M6030040O1D1820MP Terrawave 3/4 dBi Dual-band ceiling mount omnidirectional 3-leadANT-O4ABGN-0607-PT M6060070P23620 Terrawave 6/7 dBi Dual-band wall-mount patch 4-leadANT-O6ABGN-0607-PT M6060070MP13620 Terrawave 6/7 dBi Dual-band wall-mount patch 6-leadPart Numbers Manufacturer Gain DescriptionFrequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m)Power Density (S) (mW/cm2)Averaging Time |E|2, |H|2 or S (minutes)1500-100,000 5 6
AP832e/i © 2013 Meru Networks, Inc. Regulatory Information xxxviiLimits for General Population/Uncontrolled ExposureFrequencies Blocked for Regulatory Compliance802.11a frequencies 5.25-5.35 GHz and 5.47-5.725 GHz have been blocked for DFS compliance.AP832e/iFrequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m)Power Density (S) (mW/cm2)Averaging Time |E|2, |H|2 or S (minutes)1500-100,000 1.0 30Note:Occupational/controlled limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when an individual is transient through a location where occupational/controlled limits apply provided he or she is made aware of the potential for exposure. Note:General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure.
xxxviiiMeru Access Point Installation Guide © 2013 Meru Networks, Inc. USA USAUnderwriters LaboratoriesUse only with Listed I.T.E. equipment.NoticesThe unit is intended for installation in Environment A as defined in IEEE 802.3.af. All interconnected equipment must be contained within the same building, including the interconnected equipment's associated LAN connection.Suitable for use in environmental air space in accordance with Section 300-22(c) of the National Electrical Code, and Sections 2-128, 12-010(3) and 12-100 of the Cana-dian Electrical Code, Part 1, C22.1.FCC Radiation Exposure StatementRadio Frequency Interference RequirementsInterference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Caution!The radiated output power of the Meru Networks devices is well below the FCC radio frequency exposure limits. However, the Access Point should be used in such a manner that the potential for human contact during normal operation is minimized. When installing and operating these devices, keep a minimum distance of 20 cm (8 inches) between the antennas and any persons/users in the vicinity.Note:Meru Access PointsAll devices except the OAP180 are indoor devices. The FCC requires indoor use for the frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High-power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with or damage to these devices, or both.
Canada. Industry Canada (IC) © 2013 Meru Networks, Inc. Regulatory Information xxxixThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-tion. This equipment generates, uses, and can radiate radio frequency energy. If the equipment is not installed and used in accordance with the instructions, the equip-ment may cause harmful interference to radio communications. There is no guar-antee, however, that such interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encour-aged to try to correct the interference by taking one or more of the following measures:Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device must not be co-located or operating in conjunction with any other antenna or transmitter.For products available in the USA and Canadian markets, only channels 1 through 11 can be operated. Selection of other channels is not authorized.Canada. Industry Canada (IC)The Class B digital portion of this apparatus complies with Canadian standard ICES-003.These devices comply with RSS210 of Industry Canada.Per RSS 210 A9.5 point 7: (i) the device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems; (ii) the maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the e.i.r.p. limit; and (iii) the maximum antenna gain permitted (for devices in the band 5725-5825 MHz) to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appro-priate, as stated in section A9.2(3). In addition, users should also be cautioned to take note that high-power radars are allocated as Note:The Meru Access Point must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. Any other installation or use may violate FCC Part 15 regulations. Modifications not expressly approved by Meru Networks, Inc. could void your authority to operate the equipment.
xl Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Canada. Industry Canada (IC) primary users (meaning they have priority) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.(iv) These devices are not permitted to operate in the 5600 - 5650 MHz band. For products available in the USA and Canadian markets, only channels 1 through 11 can be operated. Selection of other channels is not authorized.Operation is subject to the following two conditions: (1) this device may not cause interfer-ence, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This device and its listed antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitterL’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. The term "IC" before the equipment certification number only signifies that the Industry Canada technical specifications were met. To reduce the potential radio interference to other users, the antenna type and gain should be chosen so that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empecher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit etre utilze a l’interieur et devrait etre place lin des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d’emission) est installe a l’exterieur, il doit faire l’objet d’une licence. Caution!Exposure to Radio Frequency Radiation.The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit an RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website http://www.hc-sc.gc.ca/rpb. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the antennas and any persons/users in the vicinity.
Europe—EU Declaration of Conformity and Restrictions © 2013 Meru Networks, Inc. Regulatory Information xliAccess Points have been designed to operate with the antennas listed below. Antennas not included in this list are strictly prohibited for use with these devices. The required antenna impedance is 50 ohms.AP Antennas with GainTo reduce potential radio interference to other users, the antenna type and its gain should be chosen so that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.Europe—EU Declaration of Conformity and RestrictionsNote:Meru Access PointsThese devices are restricted to indoor use because they operate in the 5.15 to 5.25 GHz frequency range. Industry Canada requires such products to be used indoors for the frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. AP Model Antenna Type Gain (2.4 GHz) Gain (5 GHz)AP300 Dual-Band Omni-Directional MN-ANTabg-W 2 dBi 3 dBiAP300 Dual-Band Omni-DirectionalANT-ABGN-23 2 dBi 3 dBiAP300 High-Gain Dipole Omni-DirectionalANT-ABGN47O 4.7dBi 4.7dBiThis equipment is marked with either the CE Mark, the alert symbol, and the notified body's number and can be used throughout the European Community. This mark indicates compliance with the R&TTE Directive 1999/5/EC and the relevant parts of the following technical speci-fications.This equipment is marked with either the CE Mark, the alert symbol, and the notified body's number and can be used throughout the European Community. This mark indicates compliance with the R&TTE Directive 1999/5/EC and the relevant parts of the following technical speci-fications.
xlii Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Europe—EU Declaration of Conformity and Restrictions EN 300 328. Electromagnetic Compatibility and Radio Spectrum Matters (ERM). Wideband transmission systems, data transmission equipment operating in the 2.4 GHz ISM (Industrial, Scientific, and Medical frequency bands in the range of 902–928 MHz, 2.4–2.485 GHz, and 5.15–5.25 GHz) band and using spread spectrum modulation techniques, harmonized EN standards covering essential requirements under article 3.2 of the R&TTE directive. EN 301 893. Broadband Radio Access Networks (BRAN). 5 GHz high-performance RLAN, harmonized EN standards covering essential requirements of article 3.2 of the R&TTE directive.EN 301 489-17. Electromagnetic Compatibility and Radio Spectrum Matters (ERM). Electromagnetic Compatibility (EMC) Standard for Radio Equipment and Services, Part 17 Specific Conditions for Wideband Data and HIPERLAN Equipment.EN 55022 Statement (applicable to AP201 Rev 2, AP208 Rev 2 only).This is to certify that the above models are shielded against the generation of radio interference in accordance with the application of Council Directive 2004/108/EC, Annex I, 1a. Conformity is declared by the application of EN 55 022 Class B (CISPR 22). Compliance is dependent upon the use of Cat 5e shielded data cables.EN 60950-1. Safety of Information Technology Equipment.EN 50385. Product standard to demonstrate the compliances of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields.Meru Networks, Inc. declares that their Access Points comply with the essential requirements and other relevant provisions of Directive 1999/5/EC. Meru Networks, Inc. vakuuttaa täten että Access Points tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Hierbij verklaart Meru Networks, Inc. dat het toestel Access Points in overeenstem-ming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze verklaart Meru Networks, Inc. dat deze Access Points voldoet aan de essen-tiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.Par la présente, Meru Networks, Inc. déclare que l’appareil Access Points est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Marking by the alert symbol indicates that usage restrictions apply. Marking by the alert symbol indicates that usage restrictions apply.
Europe—EU Declaration of Conformity and Restrictions © 2013 Meru Networks, Inc. Regulatory Information xliiiPar la présente, Meru Networks, Inc. déclare que ce Access Points est conforme aux exigences essentielles et aux autres dispositions de la directive 1999/5/CE qui lui sont applicables. Härmed intygar Meru Networks, Inc. att denna Access Points står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Undertegnede Meru Networks, Inc. erklærer herved, at følgende udstyr Access Points overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Hiermit erklärt Meru Networks, Inc. dass sich dieser/diese/dieses Access Points in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. Hiermit erklärt Meru Networks, Inc. die Übereinstimmung des Gerätes Access Points mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. Con la presente Meru Networks, Inc. dichiara che questo Access Points è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Por medio de la presente Meru Networks, Inc. declara que el Access Points cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Meru Networks, Inc. declara que este Access Points está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Hawnhekk, Meru Networks, Inc. jiddikjara li dan Access Points jikkonforma mal-htigi-jiet essenzjali u ma provvedimenti ohrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Käesolevaga kinnitab Meru Networks, Inc. seadme Access Points vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjako-hastele sätetele. Alulírott, Meru Networks, Inc. nyilatkozom, hogy a Access Points megfelel a vonat-kozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.Meru Networks, Inc. týmto vyhlasuje, e Access Points splna základné poiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Meru Networks, Inc. tímto prohlašuje, e tento Access Points je ve shode se základními poadavky a dalšími príslušnými ustanoveními smernice 1999/5/ES. Šiuo Meru Networks, Inc. deklaruoja, kad šis Access Points atitinka esminius reikala-vimus ir kitas 1999/5/EB Direktyvos nuostatas.
xliv Meru Access Point Installation Guide © 2013 Meru Networks, Inc. Japan Ar šo Meru Networks, Inc. deklare, ka Access Points atbilst Direktivas 1999/5/EK butiskajam prasibam un citiem ar to saistitajiem noteikumiem. Niniejszym, Meru Networks, Inc., deklaruje, ze Access Points spelnia wymagania zasadnicze oraz stosowne postanowienia zawarte Dyrektywie 1999/5/EC.These products are intended to be used in all countries of the European Economic Area with the following restrictions: IEEE 802.11a RestrictionsThese products are for indoor use only (5150–5250 MHz). To ensure compliance with local regulations, be sure to set your Access Point to the country in which you are using the Access Point.The Meru Access Point products can be used only indoors in the following countries: Austria, Belgium, Bulgaria, Czech Republic, Germany, Cyprus, Denmark, Estonia, Finland, France, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, The Netherlands, Norway, Portugal, Poland, Romania, Spain, Slovak Republic, Slovenia, Sweden, Switzerland, Turkey, and United Kingdom. EEE 802.11b/g RestrictionsFrance—In all Metropolitan départements, wireless LAN frequencies can be used under the following conditions, either for public or private use: Indoor use: maximum power (EIRP) of 100 mW for the entire 2400–2483.5 MHz frequency band. JapanEN 55022 Statement (applicable to AP201 Rev 2, AP208 Rev 2 only).This is to certify that the above models are shielded against the generation of radio interference in accordance with the application of Council Directive 2004/108/EC, Annex I, 1a. Conformity is declared by the application of EN 55022 Class B (CISPR 22). Compliance is dependent upon the use of shielded data cables.Model AP300Model AP300 module rev 1 003WWA080094 003GZA080095 003XWA080096
Manufacturing Information © 2013 Meru Networks, Inc. Regulatory Information xlvModel AP150 SingaporeFor the AP201 Rev 2, AP208 Rev 2, and OAP180, the following approval information applies:For the AP300 series, the following approval information applies:Manufacturing InformationThe AP1000 and AP300 are built in Taiwan. Factory information is provided under NDA and upon request.AP Plenum RequirementsWhen installing APs in an air-handling space, as described in Article 300.22(C) of the NEC (2005), the unit should only be powered by the Ethernet port (PoE), not by the AC-powered power supply.When the product is installed in air-handling spaces, the cables employed should be suitable under NEC Articles 300.22 and 725 and marked accordingly, for use in plenums and air-handling spaces with regard to smoke propagation, such as CL2-P, CL3-P, MPP or CMP.003NY06122 0000 003GZ06030 0000 003WY06046 0000 DA103798 IDA Standards Complies with DB102245 IDA Standards Complies with
xlvi Meru Access Point Installation Guide © 2013 Meru Networks, Inc. AP Plenum Requirements The products should be installed in accordance with all applicable, local regulations and practices.Manufacturers Federal Communication Commission Declaration of Conformity StatementManufacturer: Meru Networks, Inc894 Ross drive, Sunnyvale, CA 94089USA This device complies with Part 15 rules. Operation is subject to the following two conditions: 4. This device may not cause harmful interference, and 5. This device must accept any interference received, including interference that may cause undesired operation. This device operates in the 5150-5250MHz and 5470-5725MHz bands and is therefore restricted to indoor operation only per FCC guidance. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and radiates radio frequency energy, and if not installed and used in accordance with the instruc-tions, may cause harmful interference. However, there is no guarantee that interfer-ence will not occur. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures: Access Point Models Certification Number AP832eAP832i 
AP Plenum Requirements © 2013 Meru Networks, Inc. Regulatory Information xlviiReorient or relocate the receiving antenna. Increase separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from which the receiver is connected. Consult the dealer or an experienced radio/TV technician. VCCI Statement for Japan Guidelines for Operating Meru AP832e and AP832i Access pointThis section provides guidelines for avoiding interference when operating Meru access points in Japan. These guidelines are provided in both Japanese and English. This equipment operates in the same frequency bandwidth as industrial, scientific, and medical devices such as microwave ovens and mobile object identification (RF-ID) systems (licensed premises radio stations and unlicensed specified low-power radio stations) used in factory production lines. Caution! The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency when using the integrated antennas. Any changes or modification to the product not expressly approved by Meru could void the user's authority to operate this device.Caution! Within the 5.15 to 5.25 GHz and 5.47-5.725 GHz bands, this device is restricted to indoor operations to reduce any potential for harmful interference to co-channel Mobile Satellite System (MSS) operations. Warning!This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. 
xlviiiMeru Access Point Installation Guide © 2013 Meru Networks, Inc. AP Plenum Requirements 1. Before using this equipment, make sure that no premises radio stations or specified low-power radio stations of RF-ID are used in the vicinity. 2. If this equipment causes RF interference to a premises radio station of RF-ID, promptly change the frequency or stop using the device; contact the number below and ask for recommendations on avoiding radio interference, such as setting partitions. 3. If this equipment causes RF interference to a specified low-power radio station of RF-IDIndustry Canada Canadian Compliance Statement This Class B Digital apparatus meets all the requirements of the Canadian Interfer-ence-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada. This device complies with Class B Limits of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Meru Access Points are certified to the requirements of RSS-210. The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations. For further information, contact your local Industry Canada office. This device has been designed to operate with antennas having a maximum gain of 7 dBi. Antennas having a gain greater than 7 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that permitted for successful communication.Access Point Models Certification Number AP832eAP832i
AP Plenum Requirements © 2013 Meru Networks, Inc. Regulatory Information xlixEU Regulatory ConformanceAccess Point Models: AP832eAP832iThis product is CE marked according to the provisions of the R & TTE Directive (99/5/EC) - CE 2280(!){! In circle}. Meru Networks Inc., hereby declares that this AP832e and AP832i models are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. CE 2280(!)Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC This equipment is in compliance with the essential requirements of other relevant provi-sions of Directive 199/5/ECThe following standards were applied: EMC-EN 301.489-1 v1.8.1; EN 301.489-17 v2.1.1 Health & Safety-EN60950-1: 2005; EN 50385: 2002 Radio-EN 300 328 v 1.7.1; EN 301.893 v 1.5.1 The conformity assessment procedure referred to in Article 10.4 and Annex III of Directive 1999/5/EC has been followed. Declaration of Conformity for RF Exposure This section contains information on compliance with guidelines related to RF expo-sure.Note:This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation.
lMeru Access Point Installation Guide © 2013 Meru Networks, Inc. AP Plenum Requirements This Device Meets International Guidelines for Exposure to Radio Waves The AP832e and AP832i device includes radio transmitters and receivers. It is designed not to exceed the limits for exposure to radio waves (radio frequency elec-tromagnetic fields) recommended by international guidelines. The guidelines were developed by an independent scientific organization (ICNIRP) and include a substan-tial safety margin designed to ensure the safety of all persons, regardless of age and health. As such the systems are designed to be operated as to avoid contact with the antennas by the end user. It is recommended to set the system in a location where the antennas can remain at least a minimum distance as specified from the user in accordance to the regulatory guidelines which are designed to reduce the overall exposure of the user or operator.The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of wireless devices. They recommend that if you are interested in further reducing your exposure then you can easily do so by reorienting antennas away from the user or placing he antennas at a greater separation distance then recommended. This Device Meets FCC Guidelines for Exposure to Radio Waves The AP832e and AP832i include radio transmitters and receivers. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) as referenced in FCC Part 1.1310. The guidelines are based on IEEE ANSI C 95.1 (92) and include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health. As such the systems are designed to be operated as to avoid contact with the antennas by the end user. It is recommended to set the system in a location where the antennas can remain at least a minimum distance as specified from the user in accordance to the regulatory guidelines which are designed to reduce the overall exposure of the user or operator. The device has been tested and found compliant with the applicable regulations as part of the radio certification process. Separation Distance MPE Distance Limit0.63 mW/cm2 20 cm (7.87 inches) 1.00 mW/cm2 Separation Distance MPE Distance Limit0.63 mW/cm2 20 cm (7.87 inches) 1.00 mW/cm2
AP Plenum Requirements © 2013 Meru Networks, Inc. Regulatory Information liThe FCC recommends that if you are interested in further reducing your exposure then you can easily do so by reorienting antennas away from the user or placing the antennas at a greater separation distance then recommended or lowering the trans-mitter power output. This Device Meets the Industry Canada Guidelines for Exposure to Radio Waves The AP832e and AP832i include radio transmitters and receivers. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) as referenced in Health Canada Safety Code 6. The guidelines include a substantial safety margin designed into the limit to ensure the safety of all persons, regardless of age and health. As such the systems are designed to be operated as to avoid contact with the antennas by the end user. It is recommended to set the system in a location where the antennas can remain at least a minimum distance as specified from the user in accordance to the regulatory guidelines which are designed to reduce the overall exposure of the user or operator. Health Canada states that present scientific information does not indicate the need for any special precautions for the use of wireless devices. They recommend that if you are interested in further reducing your exposure you can easily do so by reori-enting antennas away from the user, placing the antennas at a greater separation distance than recommended, or lowering the transmitter power output.Maximum EIRPThe transmit EIRP is the sum of the transmit power and the antenna gain. By default, the EIRP is set lower than the regulator limit with the default rubber duct antenna. For any higher gain antennas, transmit power is reduced via the CLI to keep the EIRP below the regulatory limit.Dual Concurrent Same Band OperationWhen both AP radios are operating on the same band simultaneously, their transmit power is reduced by 3 dBm.Separation Distance MPE Distance Limit0.63 mW/cm2 20 cm (7.87 inches) 1.00 mW/cm2
lii Meru Access Point Installation Guide © 2013 Meru Networks, Inc. AP Plenum Requirements

Navigation menu