Mesa Laboratories VPT900 VPt Sensor User Manual 13 VPt Sensor

Download:
Mirror Download [FCC.gov]
Document ID	4016335
Application ID	PlTH4Zqdlm7D1o0R4C2syg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23.55kB (294376 bits)
Date Submitted	2018-09-24 00:00:00
Date Available	2018-09-24 00:00:00
Creation Date	2018-08-08 11:16:11
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2018-08-08 11:16:11
Document Title	Microsoft Word - 13 - VPt Sensor User Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Kyle

VPt Sensor User Manual
VPt Sensor User Manual
Document Number DVXXXX
01-May-18
Rev. A
Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
Tel: 303‐565‐2724
monitoring.mesalabs.com
techsupport@mesalabs.com
VPt Sensor User Manual
Contents
1.0
Safety ................................................................................................................................................ 3
2.0
Introduction ...................................................................................................................................... 3
3.0
Features ............................................................................................................................................ 5
4.0
How To .............................................................................................................................................. 6
5.0
Specifications .................................................................................................................................... 9
Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
Tel: 303‐565‐2724
monitoring.mesalabs.com
techsupport@mesalabs.com
VPt Sensor User Manual
1.0 Safety
FOR SAFE BATTERY USE:
Keep the batteries out of children’s reach
Any battery may leak battery acid if mixed with a different battery type, if inserted incorrectly (put
in backwards) or if all batteries are not replaced or recharged at the same time. Do not mix old
and new batteries. Don not mix alkaline, standard (carbon-zinc), rechargeable (nickel-metal
hydride, nickel-cadmium), or Lithium (Thionyl Chloride) batteries.
Any battery may leak battery acid or explode if disposed of in fire or any attempt is made to
charge a battery not intended to be recharged. Never recharge a cell of one type in a recharger
mad for a cell of another type.
Discard leaky batteries immediately. Leaky batteries can cause skin burns or other personal
injury. When discarding batteries, be sure to dispose of them in the proper manner, according to
your state and local regulations.
Remove batteries before storing product for a prolonged period of time. Batteries let in the unit
may leak and cause damage.
Recommended type batteries – 3.6V lithium disposables, Thionyl Chloride (Li-SOCI2). NEVER
mix battery types. Change batteries when product ceases to operate satisfactorily.
DO NOT use the AC adapter if it has been exposed to liquids, has been dropped, or is
damaged.
Protect the power cord. Place it so it is not walked on or pinched by appliance or other items.
Warning: this product is not explosion proof and is not rated for intrinsically safe installations.
2.0 Introduction
The VPt sensor integrates with Mesa’s ViewPoint software version 1.X or above. The VPt 900
MHz sensor operated in the 902 to 928 ISM band.
This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
Tel: 303‐565‐2724
monitoring.mesalabs.com
techsupport@mesalabs.com
VPt Sensor User Manual
2.1 FCC NOTICE
WARNING
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
* Consult the dealer or an experienced radio/TV technician for help.
In order to maintain compliance with FCC regulations, shielded cables must be used with this
equipment. Operation with non‐approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications made to
the equipment without the approval of manufacturer could void the user's authority to operate this
equipment. RF
Exposure Notice: To satisfy RF exposure requirements, this device and its antennas must operate with a
separation distance of at least 20 cm from all persons and must not be co‐located or operating in
conjunction with any other antenna or transmitter.
2.2 Industry Canada
This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
Tel: 303‐565‐2724
monitoring.mesalabs.com
techsupport@mesalabs.com
VPt Sensor User Manual
3.0 Features
3.1 Button and LED Sequences
VPt has a single button and corresponding LED sequence(s) to be use in order to turn on, connect, and
check the status of the VPt sensor. VPts button is located on the top right of the ViewPoint Monitoring
System label, just to the right of the LED.
Status
Power Up/Connect
Button Press
Two button presses within one
second
Status Check (Normal)
Single button press for < 3
seconds
Status Check (Broken Link)
Singe button press for < 3
seconds
Single button press for < 3
seconds
Status Check (Deep Sleep)
Fast Transmit Mode
Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
Two button presses within one
second (while linked)
Description
LED will display short pulses
showing the sensor is turned
on and looking for
connections. As VPt assesses
link partners the LED pulses
will become shorter until the
LED goes solid for 10 seconds
indicating a connection has be
established.
LED will display solid for 10
seconds indicating that the
sensor is connected.
LED will pulse a single time
indicating a broken link state
LED will pulse twice indicating
the sensor is in Deep Sleep
mode. Follow Power
Up/Connect process to wake
sensor up.
Transmit current reading and
engage fast transmit mode
Tel: 303‐565‐2724
monitoring.mesalabs.com
techsupport@mesalabs.com
VPt Sensor User Manual
Reconnect
Two button presses within one
second (broken link)
where readings will be
transmitted ever minute for
15 minutes
Resets link state and restarts
the connection process
4.0 How To
4.1 Connect, Disconnect, and Replace Probe
VPt utilizes a hirose connector to simplify and streamline the process to connect, disconnect, and or
replace the probe(s) utilized with the VPt sensor. The female portion or the hirose connector has a
specific pin‐out that matches that of the male connector located on the VPt sensor.
Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
Tel: 303‐565‐2724
monitoring.mesalabs.com
techsupport@mesalabs.com
VPt Sensor User Manual
4.1.1 Connect Probe
In order to connect a probe (or extension cable) to the VPt sensor, match the arrow located on the
probe connector with the triangle on the sensor connector and press down until seeded.
4.1.2 Disconnect Probe
In order to disconnect/remove a probe (or extension cable) from the VPt sensor, pull up slightly on the
ridged portion of the probe connector (it will slide up slightly) and disconnect from the sensor
connector.
4.2 Battery Replacement
To Replace the (2) 1.5V alkaline batteries in the VPt sensor, remove the screw on the top right corner of
the sensor and pull back the faceplate to open the unit.
Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
Tel: 303‐565‐2724
monitoring.mesalabs.com
techsupport@mesalabs.com
VPt Sensor User Manual
After replacing the batteries, place the front and rear faceplates back together, replace the screw and
hold button for < 3 seconds.
Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
Tel: 303‐565‐2724
monitoring.mesalabs.com
techsupport@mesalabs.com
VPt Sensor User Manual
5.0 Specifications
5.1 Input Types
Type
3” Stainless Steel (Temperature)
Temperature/Humidity
Air Probe
Product Code
72105‐SS‐12
72112
72107
Application Range
‐30 °C to +60°C
+10°C to +40°C and 10% RH to 90%RH
‐30°C to +60°C
5.2 Sensor
Power
Memory
Installation
Size
Mesa Labs, Inc.
12100 W. 6th Avenue
Lakewood, CO 80228 USA
2 x AA Alkaline Battery
??
Velcro, Screw, or Tape
2.6in W, 4.2in L, 1.6in H
Tel: 303‐565‐2724
monitoring.mesalabs.com
techsupport@mesalabs.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Kyle
Create Date                     : 2018:08:08 11:16:11-07:00
Modify Date                     : 2018:08:08 11:16:11-07:00
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - 13 - VPt Sensor User Manual
Creator                         : Kyle
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:ecc2941f-0994-4410-809c-0a56a7b2cb52
Instance ID                     : uuid:3cfb9730-fd09-4a94-ad18-cd1eebd2edec
Page Count                      : 9

EXIF Metadata provided by EXIF.tools