Metabo Bw 600 Users Manual Einleitungsseiten_08_en_Ebene
BW 600 to the manual 2ee6683d-fa7c-4c4b-9e5a-446b72b26151
2015-02-02
: Metabo Metabo-Bw-600-Users-Manual-436917 metabo-bw-600-users-manual-436917 metabo pdf
Open the PDF directly: View PDF 
.
Page Count: 14
| Download | |
| Open PDF In Browser | View PDF |
LOG CUTTING SAWS GARDEN SYSTEMATIC ORGANISATION SPECIAL-PURPOSE MACHINES SAWS COMMON FEATURES Ready mounted Suitable for thickest logs With wheel set and phase inverter Optimum work safety Sturdy welded construction – therefore no corrosion and suitable for tough continuous use For three phase current, 400 V 1.225 x 795 x 1.050 mm 600 mm 210 mm 320 mm 900 mm 540 mm 155 mm 45,5 m/s 400 V 4,2 kW 95 kg 950 x 790 x 1.110 mm 700 mm 240 mm 350 mm 780 mm 500 mm 200 mm 55 m/s 400 V 7,4 kW 127 kg BW 600 0106004200 BW 750 0190707500 Circular saw blade with peg tooth (56 teeth), wheel set Carbide circular saw blade with alternately bevelground tooth (42 teeth), wheel set Circular saw blades Top cutting results thanks to teeth ground on all sides and high accuracy of flatness and concentric running Tungsten carbide blades: long tool life thanks to use of unmixed carbide Can be reground repeatedly Made in Germany Special advantages Optimum pivotal point for easy work Comparative device characteristics Dimensions L x W x H Saw blade diameter Cutting diameter - With reversing tool Working height Balance surface, left Balance surface, right Cutting speed Mains voltage Rated input power Weight Type Order no. Standard equipment Material For BW 600 Chromevanadium steel Tungsten carbide For BW 750 Electro steel Chromevanadium steel Tungsten carbide Dimensions mm Tooth pitch Version Order no. 600 x 2,8 x 30 56 Peg tooth 0910003445 600 x 3,8 x 30 26 Alternately bevel-ground tips 0910003470 700 x 3,2 x 30 56 Peg tooth 0910003399 700 x 3,2 x 30 56 Peg tooth 0910003453 700 x 4,2 x 30 42 Alternately bevel-ground tips 0910003488 WATER-/PUMP TECHNOLOGY Log Cutting Saw BW 750 with wheel set COMPRESSED AIR SYSTEMS Log Cutting Saw BW 600 with wheel set WOOD-PROCESSING TECHNOLOGY BW 750 WELDING TECHNOLOGY BW 600 | 233 LOG SPLITTERS EQUIPMENT FEATURES With mobile stand – for a back-friendly operating height and easy transportation Guide plates directly at the splitting point for better guidance of shorter wooden pieces 5 tonne splitting force for firewood up to 250 mm Ø Motor with 2200 Watt power and for protection with overload switch Optimum protected two-hand safety circuit For single phase alternating current For adjusting to the wood length: stroke adjustable in two steps and additionally adjustable piston length HS 5000 W COMMON FEATURES Easy and safe handling by 2-lever safety circuit Hardened splitting wedge Large recessed safety handles for protection and for maximum safety Wheel set for easy transportation Foldable hoop guard protects the splitting material from breaking apart and falling in an uncontrolled manner Table can be adjusted to three levels for the processing of longer logs Closed lower housing section for more stability. Optimum protection for the hydraulic system Ergonomically located on/off switch HS 6001 W Log Splitter HS 5000 W Comparative device characteristics Splitting force Split length (maximum) Maximum stroke height Feed Return Dimensions L x W x H Mains voltage Rated input power Weight 5t 520 mm 320 mm 4,5 cm/s 9,5 cm/s 1.200 x 260 x 485 mm 230 V 2,2 kW 50 kg 234 | HS 5000 W 0170005000 Log Splitter HS 6001 W Log Splitter HS 6001 D 6t 1.040 mm 480 mm 4 cm/s 14 cm/s 860 x 930 x 1.040 mm 230 V 3 kW 125 kg 6t 1.040 mm 480 mm 5 cm/s 14 cm/s 860 x 930 x 1.040 mm 400 V 3,5 kW 125 kg HS 6001 W 0170006001 HS 6001 D 0170006101 Special advantages phase inverter For single phase alternating current For three phase current Comparative device characteristics Splitting force Split length (maximum) Maximum stroke height Feed Return Dimensions L x W x H Mains voltage Rated input power Weight Type Order no. HS 6001 D Type Order no. LOG SPLITTERS Cross cutters SAWS For pushing onto the splitting blade Number of operating cycles and required time is halved Order no. Cross cutter HS 6000 W/D HS 8000 D Combi Pot-galvanised 0910057570 Cross cutter HS 6001 W/D 0910063936 SPECIAL-PURPOSE MACHINES EQUIPMENT FEATURES Easy and safe handling by 2-lever safety circuit Hardened splitting wedge Large recessed safety handles for protection and for maximum safety Wheel set for easy transportation Foldable hoop guard protects the splitting material from breaking apart and falling in an uncontrolled manner phase inverter Two swivelling splitting tables for 3 stages For three phase current Order no. Splitting wedge width extension HS 6000 W/D - HS 8000 D Combi Pot-galvanised Suitable for: HS 6000 W, HS 6000 D and HS 8000 D Combi 0910058614 SYSTEMATIC ORGANISATION Splitting wedge width extension Order no. 0910011936 WOOD-PROCESSING TECHNOLOGY Hydraulic oil for log splitters 1 litre GARDEN Hydraulic oil WATER-/PUMP TECHNOLOGY HS 8000 D Combi Log Splitter HS 8000 D Combi WELDING TECHNOLOGY 8t 1.085 mm 475 mm 7,3 cm/s 23,7 cm/s 730 x 520 x 1.120 mm 400 V 4 kW 126 kg COMPRESSED AIR SYSTEMS Comparative device characteristics Splitting force Split length (maximum) Maximum stroke height Feed Return Dimensions L x W x H Mains voltage Rated input power Weight Type Order no. HS 8000 D Combi 0170800001 | 235 WOOD PROCESSING TECHNOLOGY CUTTING EDGE PRECISION. Metabo offer a wide range of wood working machinery. The quality is always high and the machines are always professional. We have a range capable of catering for everything from the active bespoke workshop to the small scale batch production facility and on again to the serious specialist user. Built for the job, built to last, built for cutting edge precision. Metabo. Work. Don’t play. 236 | WOOD PROCESSING TECHNOLOGY | 237 CROSSCUT SAWS, CROSSCUT AND MITRE SAWS MORE THAN JUST PRACTICAL. Cross cut and mitre saws are designed for cutting lengths particularly useful for when making quick simple joints, of material to length at 90° angles or with either a mitre for example, housing joints or lap joints. With the right angle or bevel angle or both. These are used for making blade and machine type crosscut and mitre saws are internal / external frames, cutting dado rails, skirting or capable of cutting wood, plastics, coated wood, alu- coving etc. Some models can also be used for trenching, minium extrusion and other soft metals. e.g. KGS 303 Plus Powerful The 1.8 kW centrally mounted universal motor is clear from view and stable even when at full bevel tilt. Comes with soft start. Saw blade stop For the easy change of the saw blade. Flange laser Giving clear view of the cutting line, particularly useful for when making repeat cuts. Integrated cutting depth adjustment For trenching, for example when making housing or lap joints. Turntable range from 50° to the left to 60° to the right. For Mitre cuts High fence profiles For secure and safe support of the work piece. Built-in holder grooves The table width extension is simply hooked in and clamped. Without any tools at all. Light and sturdy Low weight (19 kg) but still sturdy due to aluminium die cast construction. Saw head inclination up to 48° on both sides For all cuts, the coated side of the material is on top thus ensuring cleaner cutting edges. 238 | Infinitely variable adjustment of the turntable The precise degree scale enables the infinitely variable adjustment of the turntable by 50° to the left and 60° to the right. All common angle positions are equipped with a snap-lock function. Precise cuts are ensured in any desired position with the multisupported draw gear. Fixed position during transport or non-use. CROSSCUT SAWS SAWS Continuous graduation, stop points at 15°, 22.5°, 30°, 45° Saw head inclination from 0° to 45° Saw blade stop for easy saw blade change Laser for exact display of the cut Transport lock Assembly of table length extensions without tools Chip collection bag for clean air at the workplace SYSTEMATIC ORGANISATION SPECIAL-PURPOSE MACHINES EQUIPMENT FEATURES For all cutting tasks, ideal for interiors Simple cutting of all angular, bevel and rafter cuts Powerful, universal motor Turntable with precise angle adjustment Die-cast aluminium work bench Low own weight for easy transport Ergonomically shaped handle for comfortable and light working Horizontal angle adjustment, left and right up to 46° Crosscut Saw KS 210 Lasercut Standard equipment Type Order no. Order no. WOOD-PROCESSING TECHNOLOGY 460 x 390 x 485 mm 138 x 390 mm 120 mm 80 mm 65 mm 40 mm 5.000 /min 3.757 /min 46 ° 46 ° 45 ° 1,35 kW 0,62 kW 9 kg Circular saw blades Top cutting results thanks to teeth ground on all sides and high accuracy of flatness and concentric running Tungsten carbide blades: long tool life thanks to use of unmixed carbide Can be reground repeatedly Made in Germany Carbide saw blade with alternately bevel-ground tooth (40 teeth), 2 table length extensions, work clamp, tool for saw blade change, chip extraction connections, dust bag, laser KS 210 Lasercut 0102101000 0910057553 Work clamp For the secure clamping of smaller workpieces, plastic or aluminium profiles WATER-/PUMP TECHNOLOGY 66 m/s Ø 210 x 30 mm WELDING TECHNOLOGY Cutting speed Saw blade Adjustment options - Turntable left (maximum) - Turntable right (maximum) - Saw head left (maximum) Rated input power Output power Weight Accessories Material Dimensions mm Tooth pitch Version Order no. Tungsten carbide 210 x 1,8 x 30 24 6.28008 Tungsten carbide 210 x 2,4 x 30 40 Tungsten carbide 210 x 2,4 x 30 64 Alternately bevel-ground tips Alternately bevel-ground tips, 3° Flat tooth/ trapezoidal tooth, 5° neg. 6.28037 6.28082 | 239 COMPRESSED AIR SYSTEMS Comparative device characteristics Dimensions L x W x H Support surface Cutting width - 90° - 45° Cutting depth - 90° - 45° No load speed Rated load speed GARDEN KS 210 Lasercut CROSSCUT AND MITRE SAWS COMMON FEATURES For cutting wood, coated panels and plastics Simple cutting of all angular, bevel and rafter cuts Powerful, universal motor, stops in 4.5 seconds Stable design, mobile and sturdy Turntable with precise angle adjustment Die-cast aluminium work bench Low own weight for easy transport ... with sliding function Horizontal angle adjustment, left and right up to 47° Saw head inclination from -2° to 47° Precisely supported draw gear for cuts up to max. 255 mm Extensive range of accessories ... with sliding function KGS 255 KGS 255 Plus NEW Crosscut and Mitre Saw KGS 255 Crosscut and Mitre Saw KGS 255 Plus 508 x 747 x 470 mm 272 x 437 mm 1.020 x 508 x 470 mm 272 x 437 mm 255 mm 177 mm 255 mm 177 mm 60 mm 30 mm 5.700 /min 3.041 /min 66 m/s Ø 210 x 30 mm 60 mm 30 mm 5.700 /min 3.041 /min 66 m/s Ø 210 x 30 mm 47 ° 47 ° 47 ° -2 ° 230 V 1,3 kW 0,75 kW 14,5 kg 47 ° 47 ° 47 ° -2 ° 230 V 1,3 kW 0,75 kW 17 kg Carbide saw blade with alternately bevel-ground tooth (20 teeth), tool for saw blade change, chip extraction connections Carbide saw blade with alternately bevel-ground tooth (40 teeth), 2 table length extensions, work clamp, tool for saw blade change, chip extraction connections, dust bag, laser Special advantages Standard-equipped with a flange laser Integrated cutting depth control Transport lock Chip collection bag for clean air at the workplace Comparative device characteristics Dimensions L x W x H Support surface Cutting width - 90° - 45° Cutting depth - 90° - 45° No load speed Rated load speed Cutting speed Saw blade Adjustment options - Turntable left (maximum) - Turntable right (maximum) - Saw head left (maximum) - Saw head right (maximum) Mains voltage Rated input power Output power Weight Standard equipment Type Order no. 240 | KGS 255 0102550000 0102550038 0102550039 GB GB 230 V 110 V KGS 255 Plus 0102550100 0102550138 GB 230 V 0102550139 GB 110 V CROSSCUT AND MITRE SAWS COMMON FEATURES For all cutting tasks, ideal for interiors For cutting wood, coated panels and plastics Induction motor – soft and powerful, maintenance free With electronic motor brake, stops in 3.5 seconds Stable design, mobile and sturdy Die-cast aluminium work bench High precision and good working results ensured by the stable saw head SPECIAL-PURPOSE MACHINES ... with sliding function SYSTEMATIC ORGANISATION ... with sliding function SAWS Saw head inclination from 0° to 45° Turntable adjustable by 45º on both sides Assembly bores for table assembly and positioning laser (accessories) Extensive range of accessories Standard equipment Type Order no. GARDEN Crosscut and Mitre Saw KGS 331 510 x 470 x 490 mm 450 x 480 mm 510 x 470 x 490 mm 450 x 480 mm 300 mm 212 mm 300 mm 212 mm 53 mm 54 mm 3.000 /min 2.800 /min 36,5 m/s Ø 250 x 30 mm 53 mm 54 mm 3.000 /min 2.800 /min 36,5 m/s Ø 250 x 30 mm 45 ° 45 ° 45 ° 1,6 kW 0,6 kW 23 kg 45 ° 45 ° 45 ° 1,6 kW 0,6 kW 23 kg Carbide saw blade with alternately bevelground tooth (24 teeth, 3° negative chipping angle), tool for saw blade change, chip extraction connections Carbide saw blade with alternately bevelground tooth (60 teeth, 5° negative chipping angle), tool for saw blade change, chip and dust extraction unit, chip extraction connections KGS 301 0103001145 KGS 331 0103001153 D A WATER-/PUMP TECHNOLOGY WOOD-PROCESSING TECHNOLOGY Crosscut and Mitre Saw KGS 301 COMPRESSED AIR SYSTEMS Comparative device characteristics Dimensions L x W x H Support surface Cutting width - 90° - 45° Cutting depth - 90° - 45° No load speed Rated load speed Cutting speed Saw blade Adjustment options - Turntable left (maximum) - Turntable right (maximum) - Saw head left (maximum) Rated input power Output power Weight KGS 331 WELDING TECHNOLOGY KGS 301 CH | 241 CROSSCUT AND MITRE SAWS EQUIPMENT FEATURES For cutting wood, coated panels and plastics Simple cutting of all angular, bevel and rafter cuts Powerful, universal motor Soft start with natural dual belt friction braking, stops in 7.5 seconds Stable design, mobile and sturdy Turntable with precise angle adjustment Die-cast aluminium work bench High precision and good working results ensured by the stable saw head Turntable with patented advance angle adjustment for selectable stop points Multi-supported draw gear Integrated cutting depth control Transport lock Integrated and extractable table width extensions Extensive range of accessories If a 315 mm saw blade is used, cutting sizes of 335 x 106 mm are possible EQUIPMENT FEATURES For all cutting tasks, ideal for interiors For cutting wood, coated panels and plastics Simple cutting of all angular, bevel and rafter cuts Powerful, universal motor, stops in 3.5 seconds Turntable with precise angle adjustment Die-cast aluminium work bench Suitable for right-handed and left-handed operators Cutting width increased to 300 mm Saw head can be tilted by up to 48° on both sides Multi-supported draw gear High guide profiles that can be moved at the side, for the improved fixing of the workpiece Standard-equipped with a flange laser Integrated cutting depth control Transport lock Extensive range of accessories Soft start with natural belt & gear friction braking ... with sliding function ... with sliding function KGS 303 Plus KGS 305 Crosscut and Mitre Saw KGS 303 Plus Comparative device characteristics Dimensions L x W x H Support surface Cutting width - 90° - 45° Cutting depth - 90° - 45° No load speed Rated load speed Cutting speed Saw blade Adjustment options - Turntable left (maximum) - Turntable right (maximum) - Saw head left (maximum) - Saw head right (maximum) Rated input power Output power Weight Standard equipment Type Order no. 242 | 575 x 885 x 595 mm 330 x 510 mm 300 mm 200 mm 81 mm 54 mm 5.020 /min 2.580 /min 66 m/s Ø 250 x 30 mm 50 ° 60 ° 48 ° 48 ° 1,8 kW 1,1 kW 19 kg Carbide saw blade with alternately bevel-ground tooth (48 teeth), high guide profiles that can be moved at the sides, tool for saw blade change, chip extraction connections, laser KGS 303 Plus 0103030000 0103030038 GB 230 V 0103030039 GB 110 V Crosscut and Mitre Saw KGS 305 Comparative device characteristics Dimensions L x W x H Support surface Cutting width - 90° - 45° Cutting depth - 90° - 45° No load speed Rated load speed Cutting speed Saw blade Adjustment options - Turntable left (maximum) - Turntable right (maximum) - Saw head left (maximum) - Saw head right (maximum) Rated input power Output power Weight Standard equipment Type Order no. 1.180 x 1.040 x 690 mm 1.040 x 360 mm 320 mm 226 mm 120 mm 60 mm 3.850 /min 2.794 /min 61,5 m/s Ø 305 x 30 mm 50 ° 60 ° 47 ° 47 ° 2 kW 1,24 kW 29 kg Carbide saw blade with alternately bevel-ground tooth (80 teeth), 2 table length extensions, work clamp, tool for saw blade change, chip extraction connections KGS 305 0103050000 0103050038 0103050039 GB GB 230 V 110 V CROSSCUT AND MITRE SAWS Order no. NEW NEW Machine stand For ideal working height and secure base Can also be used on uneven surfaces Collapsible, with height compensation Suitable for: KGS 301, KGS 331 KSU 400 roller supports For long work pieces The cut material can be easily transported using rollers Width: 260 mm 0910064592 KSU 400 support base Additional support base for better support of the KSU 400 when extended 0910064606 Long guide for KSU 400 Length: 615 mm 0910064720 SAWS Order no. 0910003518 SPECIAL-PURPOSE MACHINES Machine stand Order no. 0910057529 Order no. Special accessories for KSU 400 machine stand Order no. NEW 0910064584 Wheel set For easy transportation Can also be used with the stand folded up Table length extension left, steel For the secure supporting of long workpieces With length guide and scale, up to 1,600 mm Dimension slide for repeating accuracy Can be used on left and right with the KGS 255 Length: 1.000 mm Width: 200 mm 0910058827 Table length extension right, steel For the secure supporting of long workpieces With length guide and scale, extractable up to 3,000 mm Dimension slide for repeating accuracy Length: 1.140 mm Width: 200 mm 0910058894 WELDING TECHNOLOGY 0910066110 Machine stand KSU 400 Machine stand and table extension in one sturdy construction Universal end profile makes it suitable for all the conventional crosscut saws of well-known manufacturers Sturdy legs with height adjustment Extensive range of accessories Max. total length 400 cm Max. weight load in central part 250 kg Weight: 25 kg Suitable for: KGT 300, KGS 255, KGS 301, 331, KGS 303, KGS 305, KS 210 C, KS 210 Lasercut, KS 210 0910058886 COMPRESSED AIR SYSTEMS NEW Table length extension right, steel For the secure supporting of long workpieces With length guide and scale, up to 1,600 mm Dimension slide for repeating accuracy Length: 1.140 mm Width: 200 mm WOOD-PROCESSING TECHNOLOGY Table length extensions For KGS 255 and KGS 303 WATER-/PUMP TECHNOLOGY Universal machine stand For ideal working height and secure base Can also be used on uneven surfaces Collapsible, with height compensation Suitable for: KS 210 C, KGS 255, KGS 301, KGS 303, KGS 305, KGS 331, KGT 300, DH 330 0910053230 Table length extension for right and left For the secure supporting of long workpieces With collapsible length guide Length: 350 mm Width: 80 mm GARDEN Table length extensions For KGS 255, KGS 301 and KGS 331 SYSTEMATIC ORGANISATION NEW | 243 CROSSCUT AND MITRE SAWS Order no. Table length extension left, steel For the secure supporting of long workpieces With length guide and scale, extractable up to 3,000 mm Dimension slide for repeating accuracy Can be used on left and right with the KGS 255 Length: 1.000 mm Width: 200 mm 0910058835 Table length extension right, aluminium For the secure supporting of long workpieces With length guide and scale, extractable up to 3,000 mm Dimension slide for repeating accuracy Foldable and heightadjustable support leg Length: 1.130 mm Width: 200 mm 0910057545 Table length extension left, aluminium For the secure supporting of long workpieces With length guide and scale, extractable up to 3,000 mm Dimension slide for repeating accuracy Foldable and heightadjustable support leg Can be used on left and right with the KGS 255 Length: 1.000 mm Width: 200 mm 0910057537 Order no. Table length extensions For KGS 301 and KGS 331 Order no. 0910006525 Table length extension, right For the secure supporting of long workpieces With support surface, scale and supplementary stop for repeating accuracy Collapsible, easy to transport Supporting length 1,660 mm Length: 1.440 mm Width: 165 mm Table length extension, left 0910003500 For the secure supporting of long workpieces Telescope length extension with scale, extractable up to 3,000 mm Two support surfaces with guide for repeating accuracy Collapsible, easy to transport Length: 1.650 mm Width: 165 mm 244 | Table length extensions For KGS 305 Table length extension right, steel For the secure supporting of long workpieces With length guide and scale, up to 1,600 mm Dimension slide for repeating accuracy Length: 1.140 mm Width: 200 mm 0910061895 Table length extension left, steel For the secure supporting of long workpieces With length guide and scale, up to 1,600 mm Dimension slide for repeating accuracy Length: 1.000 mm Width: 200 mm 0910061887 0910061917 Table length extension right, aluminium For the secure supporting of long workpieces With length guide and scale, extractable up to 3,000 mm Dimension slide for repeating accuracy Foldable and heightadjustable support leg Length: 1.130 mm Width: 200 mm Table length extension left, aluminium For the secure supporting of long workpieces With length guide and scale, extractable up to 3,000 mm Dimension slide for repeating accuracy Foldable and heightadjustable support leg Length: 1.000 mm Width: 200 mm 0910061909 Extension profile for table length extension Order no. Extension profile for table length extensions For extending the 1,600 mm table length extension to 3000 mm Suitable for: KGS 255, KGS 303, KGS 305 Length: 1.400 mm 0910058878 CROSSCUT AND MITRE SAWS Order no. 0910009010 NEW Work clamps Order no. Work clamp For the secure clamping of smaller workpieces, plastic or aluminium profiles Suitable for: KGS 301 0910031228 Positioning laser For a perfect preview of the sawing cut Automatic activation by means of tachometric relay The workpiece can be positioned quickly and securely for cutting No more test cuts Battery-powered line laser with 6 spare batteries Suitable for: KGS 305 0910063952 SAWS Length guide For repeating accuracy even when making smaller cuts Suitable for: KGS 301, KGS 331 SYSTEMATIC ORGANISATION 0910059831 0910063553 GARDEN Supplementary stop For the safe and tear-free processing of small workpieces and strips Also particularly suitable for tall workpieces Suitable for: KGS 255, KGS 303, KGT 300 Positioning laser For a perfect preview of the sawing cut Automatic activation by means of tachometric relay The workpiece can be positioned quickly and securely for cutting No more test cuts Battery-powered line laser with 6 spare batteries Suitable for: KGS 303 Roller stands Work clamp For the secure clamping of smaller workpieces, plastic or aluminium profiles Suitable for: KGS 255, KGS 303, KGS 305, KGT 300, KGT 501, KS 210 C, KS 210 Lasercut 0910057553 For supporting long workpieces when sawing, moulding/routing, planing and drilling Sturdy, height-adjustable and foldable Order no. Roller stand RS 420 With smooth-rolling special steel rollers with a high load capacity Width: 400 mm Base weight: 100 kg Height: 640 - 1.015 mm 0910053353 Roller stand RS 420 G With smooth-rolling chromium-plated ball bearings Also permits lateral movements Ideal for panel material Width: 520 mm Base weight: 100 kg Height: 640 - 1.015 mm Roller stand RS 420 W With smooth-rolling chromium-plated ball bearings Adjustable ball bearing gib Also permits lateral movements Ideal for panel material, round or square workpieces Width: 420 mm Base weight: 100 kg Height: 640 - 1.015 mm 0910053345 WOOD-PROCESSING TECHNOLOGY Order no. SPECIAL-PURPOSE MACHINES Supplementary stops 0910064738 0910040553 0910053361 WELDING TECHNOLOGY NEW Positioning laser For a perfect preview of the sawing cut Automatic activation by means of tachometric relay The workpiece can be positioned quickly and securely for cutting No more test cuts Battery-powered line laser with 6 spare batteries Suitable for: KGS 255 Positioning laser For a perfect preview of the sawing cut The workpiece can be positioned quickly and securely for cutting No more test cuts Battery-powered line laser Suitable for: KGS 301, KGS 331, KGT 500, KGT 501 COMPRESSED AIR SYSTEMS Order no. WATER-/PUMP TECHNOLOGY Positioning laser | 245 CROSSCUT AND MITRE SAWS Chip and dust extraction units Spray for maintenance and care Order no. 0910003496 Chip and dust extraction unit For a cleaner work environment and an unobstructed view of the workpiece you want to cut Standard equipment for the KGS 331 Extraction nozzle Ø: 100 mm Suitable for: KGS 301, KGS 331 0910061127 Chip and dust extraction unit For a cleaner work environment and an unobstructed view of the workpiece you want to cut For connection to a chip and dust extraction system or the Metabo multi-purpose vacuum cleaner Suction in two places (the machine's suction connection and the protective cover's extraction nozzle) Consists of suction hose and 2 connectors Extraction nozzle Ø: 100 mm Suitable for: KGS 305 Suction adapter Order no. 44 mm diameter-Ø 35 mm bore-Ø 100 mm diameter-Ø bore-Ø 44 mm 58 mm 58 mm 44 mm diameter-Ø Suction adapter For connecting the crosscut and mitre saws to the Metabo multi-purpose vacuum cleaner Connection option for a Metabo dust bag 6.31289 Suction adapter Multi For KGS 255 / KGS 305 For KGS 303 only with chip and dust extraction unit order no. 0910057561 0910059955 Spray for maintenance and care Ideal for maintenance and care of wood processing machines Contains silicon, prevents saw dust from sticking, e.g. to threaded rods or sliding bearings Increases the sliding quality of the workpieces on the machine table High cleaning capacity Top cutting results thanks to teeth ground on all sides and high accuracy of flatness and concentric running Tungsten carbide blades: long tool life thanks to use of unmixed carbide Can be reground repeatedly Made in Germany Material Dimensions mm Tooth pitch Version Order no. 210 x 1,8 x 30 24 6.28008 Tungsten carbide 210 x 2,4 x 30 40 Tungsten carbide 210 x 2,4 x 30 64 Alternately bevel-ground tips Alternately bevel-ground tips, 3° Flat tooth/ trapezoidal tooth, 5° negative Alternately bevel-ground tips, 3° negative Alternately bevel-ground tips, 5° negative Alternately bevel-ground tips, 5° negative Flat tooth/ trapezoidal tooth, 5° negative 6.28013 Alternately bevel-ground tips Alternately bevel-ground tips Flat tooth/ trapezoidal tooth Alternately bevel-ground tips 6.28054 For KGS 255 Tungsten carbide For KGS 301, KGS 303 and KGS 331 Tungsten 250 x 2,8 x 30 24 carbide Tungsten carbide 250 x 2,4 x 30 48 Tungsten carbide 250 x 2,4 x 30 60 Tungsten carbide 250 x 2,8 x 30 80 305 x 2,4 x 30 60 Tungsten carbide 305 x 2,4 x 30 80 Tungsten carbide 305 x 2,8 x 30 96 Tungsten carbide 315 x 2,8 x 30 84 For KGS 305 Tungsten carbide Order no. Push block For the lateral guiding of the workpiece 0911018691 Circular saw blades 0910058010 Push block 246 | Order no. 0910057200 6.28037 6.28082 6.28047 6.28048 6.28088 6.28055 6.28091 6.28058
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2008:06:27 09:20:35+02:00 Create Date : 2008:06:27 09:19:18+02:00 Metadata Date : 2008:06:27 09:20:35+02:00 Creator Tool : InDesign: pictwpstops filter 1.0 Format : application/pdf Title : Einleitungsseiten_08_en_Ebene.indd Creator : Platz 8 Document ID : uuid:5f265d9f-1476-4b3c-a4b2-59a5ec56b9b4 Instance ID : uuid:cf92764e-5cc4-49b6-99bb-4b497130998c Producer : Acrobat Distiller 7.0.5 (Windows) Page Count : 14 Author : Platz 8EXIF Metadata provided by EXIF.tools