Mettler Toledo EASYSCANUSB RFID Reader/Writer User Manual EasyScan USB

Mettler-Toledo GmbH RFID Reader/Writer EasyScan USB

Installation Manual

EasyScan USBfor reading and writing RFID tagsAdditional languages available online.u www.mt.com/EasyScan-USB-INI1 Installation12Optional: The EasyScan USB can also be used as a laboratory equipment with the LabX interface viaa USB connection to a computer.For a detailed description of how to use the EasyScan USB (connecting a USB device, using an RFIDreader), see the balance Reference Manual (RM).u www.mt.com/XPR-analytical-RM30419764B12/13/2018 3:46 PM- Schema ST4 PDF engine -Layout by Victor MahlerInstallation Instructions
22 Technical Data2.1 General technical dataEasyScan USBElectrical data: 5V DC, 0.3A, 1.5W max.Weight (without packaging): 295 gProtection and standardsOvervoltage category: IIDegree of pollution: 2Range of application: For use in closed interior rooms onlyEnvironmental conditionsHeight above mean sea level: Up to 5000mAmbient temperature: +5 – +40°CRelative air humidity: 20 – 80%, non-condensingStorage conditions (in packaging)Ambient temperature: -25 – +70 °CRelative air humidity: 10 – 90%, non-condensingMaterialsHousing: Lacquered aluminum; anodized glass; plastic2.2 DimensionsDimensions in mm.85321163 CleaningThe EasyScan USB is made from high quality materials and can be cleaned with a commercially available, mildcleaning agent.The cleaning interval depends on your standard operating procedure (SOP). WARNINGElectric shock1 Disconnect the EasyScan USB from the balance prior to cleaning.2 Prevent liquid from entering the instrument.3 Do not open the EasyScan USB.
34 Compliance InformationUnited States of AmericaThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference when theequipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequencyenergy and, if not installed and used in accordance with the instruction manual, may cause harmful interference toradio communications. Operation of this equipment in a residential area is likely to cause harmful interference in whichcase the user will be required to correct the interference at his own expense.CanadaThis device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and EconomicDevelopment Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:1. This device may not cause interference.2. This device must accept any interference, including interference that may cause undesired operation of the device.5 DisposalIn conformance with the European Directive 2012/19/EU on Waste Electrical and ElectronicEquipment (WEEE) this device may not be disposed of in domestic waste. This also applies tocountries outside the EU, per their specific requirements. Please dispose of this product in accordance with local regulations at the collecting point specifiedfor electrical and electronic equipment. If you have any questions, please contact the responsibleauthority or the distributor from which you purchased this device. Should this device be passed onto other parties, the content of this regulation must also be related.6 ServiceDo not open the EasyScan USB. It contains no user-serviceable parts. Contact a METTLER TOLEDO representative tolearn more about the service options available.
Mettler-Toledo GmbHIm Langacher 448606 Greifensee, Switzerlandwww.mt.com/contactSubject to technical changes.© Mettler-Toledo GmbH 12/201830419764Ben30419764

Navigation menu