Micro Star MS6804 Wireless 11b Mini PCI User Manual
Micro Star International Co Ltd Wireless 11b Mini PCI Users Manual
Manual
Wireless 11b Mini PCI MS-6804 User’s Guide FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Notice 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Notice 2 Shielded interface cables and A.C. power cord, if any, must be used in order to comply with the emission limits. VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU. FCCID:I4L-MS6804 This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions. (1) This device may not cause harm full interference and (2) This device must accept any interference received. Including interference that may cause undesired operation FCC Requirement This equipment complies with Part 68 of the FCC Rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration Number, Ringer Equivalence Number (REN) and USOC jack type for this equipment.You must, upon request, provide this information to your telephone company. An FCC compliant telephone cord and modular jack is provided with this equipment. This equipment is designed to be connected to the telephone network or premise wiring use a compatible modular jack which is Part 68 compliant. See installation instructions for details. The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those devices ring when your telephone number is called. In most, but not all areas, the sum of the REN of all devices connected to on line should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area. If your telephone equipment causes harm to the telephone network, the Telephone Company may discontinue your service temporarily. If possible, they will notify you in advance, but if advance notice is not practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to you an opportunity to maintain uninterrupted telephone service. If you experience trouble with this telephone equipment, please contact MICROSTAR INTERNATIONAL for information on obtaining service or repairs. The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to stat tariffs. This equipment complies with the FCC RF radiation exposure limits set forth for Uncontrolled environment. This device and its antenna must not be colocated or Operating in conjunction with any other antenna or transmitter. Copyright Notice The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks used in this manual are the sole property of their respective owners. Windows is a registered trademark of Microsoft Corporation. Revision History Revision V1.0 Revision History First Release Date March 2003 Important Safety Precautions Always read and follow these basic safety precautions carefully when handling any piece of electronic component. 1. 2. 3. 4. 5. 6. 7. 8. Keep this User’s Manual for future reference. Keep this equipment away from humidity. Lay this equipment on a reliable flat surface before setting it up. The openings on the enclosure are for air convection hence protects the equipment from overheating. All cautions and warnings on the equipment should be noted. Never pour any liquid into the opening that could damage or cause electrical shock. If any of the following situations arises, get the equipment checked by a service personnel: Liquid has penetrated into the equipment The equipment has been exposed to moisture The equipment has not work well or you can not get it work according to User’s Manual The equipment has dropped and damaged If the equipment has obvious sign of breakage DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDITIONED, STORAGE TEMPERATURE ABOVE 600C OR BELOW -200C, IT MAY DAMAGE THE EQUIPMENT. Table of Contents 1. Introduction ............................................................................................. 1 1.1 What is Wireless 11b Mini PCI ................................................................ 1 1.2 How Wireless 11b Mini PCI works ........................................................... 2 1.3 Specifications ......................................................................................... 4 1.4 System requirements ............................................................................... 6 1.5 Package content ..................................................................................... 6 1.6 Layout ................................................................................................... 7 2. Hardware installation ............................................................................... 8 3. Software installation ................................................................................ 9 3.1 Installing on Windows 98SE/ME/2000/XP ............................................... 9 4. MSI wireless network utility .................................................................... 13 4.1 In wireless network tab ........................................................................... 13 4.2 Encryption ............................................................................................. 18 4.3 In status tab ........................................................................................... 19 4.4 In information tab ................................................................................... 22 4.5 Using Windows XP as Access Point ....................................................... 23 5. Network connection ................................................................................. 27 5.1 Computer identification ........................................................................... 28 5.2 How to install TCP/IP ............................................................................. 29 5.3 Configuring a dynamic IP address ........................................................... 31 5.4 Configuring a static IP address ................................................................ 33 5.5 Checking TCP/IP address ....................................................................... 36 5.6 Checking the connection by pinging ....................................................... 38 5.7 Sharing files ........................................................................................... 39 6. Troubleshooting ....................................................................................... 43 7. Technical Support .................................................................................... 45 Wireless 11b Mini PCI User’s Guide 1. introduction 1.1 What is Wireless 11b Mini PCI Wirelss 11b Mini PCI, compliant with IEEE802.11b, is a high-efficiency wireless adapter for wireless networking at home, in office or in public places. The data transfer rate can be auto-negotiated to 1, 2, 5.5Mbps or up to 11Mbps and is compatible with any existing IEEE802. 11b devices. With Wirelss 11b Mini PCI, you can roam between conference room and office without being disconnected the LAN cables; in addition, sharing files and printers can be easy tasks. The Wirelss 11b Mini PCI is available to Microsoft Windows operating systems (Windows® XP/2000/ME/98SE) and can be integrated into networking with either Ad-hoc mode (without an Access Point) or Infrastructure mode (with an Access Point). Wireless 11b Mini PCI User’s Guide 1.2 How Wireless 11b Mini PCI works Ad -h oc Netwo rki ng Mod e --- An Ad-hoc (or "spontaneous") network is a local area network or other small network, especially one with wireless or temporary plug-in connections, in which some of the network devices are part of the network only for the duration of a communications session. Users on the network can share files, print to a shared printer, and access the Internet with a shared modem. In this kind of network, new devices can be quickly added; however, users can only communicate with other wireless LAN computers that are in the wireless LAN workgroup, and are within range. Internet Cable Modem / DSL wireless Desktop PC with Wireless 11b Mini PCI (The Mini PCI module is optional) Laptop PC with Wireless 11b Mini PCI (The Mini PCI module is optional) Wireless 11b Mini PCI User’s Guide Infrastructure Networking Mode--- Infrastructure networking differs from Ad-hoc networking is that it includes an Access Point. In an Infrastructure networking, the Access Point can manage the bandwidth to maximize bandwidth utilization. Additionally, the Access Point enables users on a wireless LAN to access an existing wired network, allowing wireless users to take advantage of the wired networks resources, such as Internet, email, file transfer, and printer sharing. The scale and range of the Infrastructure networking are larger and wider than that of the Ad-hoc networking. Internet Cable Modem / DSL Access Point Router wireless Desktop PC with Wireless 11b Mini PCI (The Mini PCI module is optional) wireless wireless wireless Laptop PC with Wireless 11b Mini PCI (The Mini PCI module is optional) Laptop PC with Wireless 11b Mini PCI (The Mini PCI module is optional) Laptop PC with Wireless 11b Mini PCI (The Mini PCI module is optional) Wireless 11b Mini PCI User’s Guide 1.3 Specifications Form Factor Mini-PCI Type IIIA Standard IEEE 802.11b Frequency Range 2.4GHz to 2.4835GHz, Direct Sequence Spread Spectrum (DSSS) Data Rate 11, 5.5, 2, 1 Mbps, Auto Fall-Back Operating Channels US & Canada:11 channels, Europe: 1 to 13 channels, France: 4 channels, Spain: 2 channels, Japan: 14 channels Modulation DBPSK @ 1 Mbps, DQPSK @ 2Mbps, CCK @ 5.5 and 11 Mbps Media Access Protocol CSMA/CA with ACK (HalfDuplex) Antenna Internal diversity with connectors Security / Encryption 64-/128-bit WEP key Range Open Space Operation voltage 11 Mbps @ 160m (525ft), 5.5 Mbps @ 270m (885ft), 2 Mbps @ 400m (1300ft), 1Mbps @ 550m (1750ft) 3.3V Wireless 11b Mini PCI User’s Guide Power Consumption Tx Rx Standby 436mA 283mA 84mA Operating Temperature 0 to 550C Operating Humidity 0 to 95% (non-condensing) Operating system Windows® 98SE/ME/2K/XP Dimensions (WxDxH) 59.71 X 51 X 1 mm Weight 12g Wireless 11b Mini PCI User’s Guide 1.4 System requirements Before Installing the Wireless 11b Mini PCI, your PC should meet the following: Laptop PC with mini PCI module or desktop PC with mini PCI module. Windows® 98SE/ME/2000/XP operating system. Minimum 5M bytes free disk space for installing the driver and utilities. CD-ROM drive, double speed or higher. 1.5 Package content Unpack the package and check all the items carefully. If any item contained is damaged or missing, please contact your local dealer as soon as possible. Also, keep the box and packing materials in case you need to ship the unit in the future. The package should contain the following items: Wireless 11b Mini PCI Quick Installation Guide CD title including drivers and utilities Wireless 11b Mini PCI User’s Guide 1.6 Layout External antenna connectors --- Connecting to external antennas for enhanced data transmission and reception. The external antenna is well designed on the desktop computer or the laptop computer. Golden Finger Wireless 11b Mini PCI User’s Guide 2. hardware installation The installation drawing below is suitable for most computers which provide mini PCI module. For more information about the mini PCI module, please refer to your computer manual. To install Wireless 11b Mini PCI in your system: 1. Remove the computer cover. Locate the mini PCI module. The standard mini PCI module is shown as the drawing. Foolproof notch 30 2. Place Wireless 11b Mini PCI over the Mini PCI slot (at an angle of 30 degrees). Then, gently insert it into the slot until the golden finger of the card gets fully inserted. 3. Press down the card, and the retaining clips (on two sides of the slot) will lock onto the notches of the card. To remove Wireless 11b Mini PCI from your system: 1. Press the retaining clips outwards, and the card should bound upwards slightly after being released from the slot. 2. Remove the card from the Mini PCI slot carefully. Do not hold the Wireless 11b Mini PCI on the golden finger because it may cause interference or damage. Wireless 11b Mini PCI User’s Guide 3. software installation This part provides the procedures to install drivers and the utilities. Each installation procedure comes with a drawing and instruction. Follow the instruction step by step to finish the installation. During the installation, Windows® 98SE/ME/2000/XP may need to copy Windows system files from the Windows® 98SE/ME/2000/XP installation disk/CD. Therefore, please prepare a copy of the Windows® 98SE/ME/2000/XP installation disk/CD at hand before installing the driver if possible. 3.1 Installing on Windows® 98SE/ME/ 2000/XP The card should be inserted into your computer while installing the driver. Installation Procedure: 1. Insert the driver CD into your CD-ROM drive, and then the setup program should start automatically. If it doesn’t start, click the Start button at the Taskbar and then select Run. Enter E:\setup.exe if E is your CD-drive. Then click the driver option to continue. Click here to start software installation Wireless 11b Mini PCI User’s Guide 2. Click Next to read the License Agreement. Check the radio box to agree and click Next to continue, or No to end the installation. Enter user’s information and then click Next. Click here Check here Click here Click here 10 Wireless 11b Mini PCI User’s Guide 3. Click Install to start installation, then click Finish to continue as you are notified the installation has been completed. Click here Click here 4. InstallShield Wizard may ask you to restart your computer. Choose Yes to restart your computer. Click here 5. After restarting your PC, you will find an icon indicated MSI Wireless LAN on your taskbar. Just double-click on it for configuration. MSI Wireless LAN icon 11 Wireless 11b Mini PCI User’s Guide Note 12 Wireless 11b Mini PCI User’s Guide 4. msi wireless network utility 4.1 In wireless network tab If you are going to use the wireless network in Infrastructure mode, please follow the steps: 1. Double click the MSI Wireless LAN icon on the task bar to launch the network configuration window. Double click the MSI Wireless LAN icon 2. The window appears. Click Advanced. Enter network key if the wireless administrator has set a network key in advance Click here 13 Wireless 11b Mini PCI User’s Guide 3. All available networks will show in the Available Networks list, and you can click Refresh button to refresh or search for the available networks. Click Configure to configure the existing networks. All available networks list Click here 4. As an administrator, you can change the network name (SSID) and network key which is encoded by 5/13 characters (10/26 hex-adecimal digital). Network name (SSID) Ne twor k k ey settings 14 Wireless 11b Mini PCI User’s Guide 5. You may also choose the networks you prefer from the Available Networks list and use the Move up/Move down to set the priority of your preferred networks. Preferred network list 6. Click OK, and you can use the wireless network in Infrastructure mode. 15 Wireless 11b Mini PCI User’s Guide If you are going to use the wireless network in Ad-hoc mode, please follow the steps: 1. Double click the MSI Wireless LAN icon on the task bar to launch the network configuration window. Double click the MSI Wireless LAN icon 2. The window appears. Click Advanced. Click here 16 Wireless 11b Mini PCI User’s Guide 3. Click Add to add a new network. Add a new network 4. As an administrator, you can change the network name (SSID) and network key which is encoded by 5/13 characters (10/26 hex-adecimal digital). Enter a net work name(SSID) for this ad-hoc network Check Encryption and cancel This key is provided for me automatically to enable web key settings. Also refer to 4.2 Encryption. Check here to enable Ad-hoc network 17 Wireless 11b Mini PCI User’s Guide 5. Click OK to finish the Ad-hoc network for the first computer (administrator). 6. Any one who wants to use the Ad-hoc network should repeat step 1 to 3. In step 3, you will see the network set by the first computer (administrator); then choose it and click OK. You can use the wireless network in Ad-hoc mode. 4.2 Encryption In this window, you can set up 4 sets of WEB keys which can be 5 characters (10 hex-adecimal digital) or 13 characters (26 hex-adecimal digital) and specify one of them to use. †Network key --- Enter a key for the network. †Key format --- You can decide the network key to be encoded by ASCII characters or hexadecimal digitals. †Key length --- In ASCII characters format, it can be 5 or 13 characters. In hexadecimal digitals format, it would be 10 or 26 digitals. †Key index --- There can be up to 4 sets of WEB keys, from 0 to 3. 18 Wireless 11b Mini PCI User’s Guide 4.3 In status tab In Status tab, you can further configure the network settings. Click here Channel: Specify the operating radio frequency channel in “Ad-hoc” mode, which should be set to the same channel as the other points in the wireless network. Speed: This field sets the current transmitting rate. There are four fixed rates: 1 Mbps, 2 Mbps, 5.5 Mbps, and 11 Mbps. The speed should be set to Auto rate to optimize performance and range, which will adjust the transfer speed for best performance and longest range automatically. Radio: Set to On to activate the radio. 19 Wireless 11b Mini PCI User’s Guide SSID: Means Service Set Identifier, an unique name shared among all points in a wireless network. It must be identical for all points in the network. Then the card will be able to connect to an access point with the same SSID. Status: It shows status information about the radio link. †Signal Strengh --- This bar shows the received signal strength level. The higher the blue bar is, the more power the radio signal is received by the the card. †Link Quality --- This bar shows the measured signal level and connection status. The higher the blue bar is, the better the radio signal is received by the card. Click Advance, you can get some information about the LAN traffic status and more detailed settings. 20 Wireless 11b Mini PCI User’s Guide Changing the settings here is not recommended unless you are familiar with those advanced configurations. Fragmentation Threshold: You may set the length of the fragment in this field. Please note that each fragment should not be larger than the Fragmentation Threshold. RTS/CTS Threshold: You may set the length threshold. Preamble Type: You may set the length of preamble in this field. Setting options:Long, Short, Auto. †Long --- It is set to 144 bits. †Short --- It is set to 72 bits. †Auto ---The card supports an auto-detection feature, it automatically selects the Preamble Type depending on the Access Point Preamble Type if this option is selected. Country: Select the country that you are in. Power save: The card will turn into power save mode when idle. 21 Wireless 11b Mini PCI User’s Guide 4.4 In information tab In Information tab, you can get some information about the manufacturer, hardware and software. 22 Wireless 11b Mini PCI User’s Guide 4.5 Using Windows® XP as Access Point Windows® XP provides a feature in the Control Panel to help to link two networks. 1. In the Control Panel, select Network Connections and the window below will appear. 2. Select Wireless Network Connection and Local Area Connection simultaneously, and right click to select Bridge Connections. 23 Wireless 11b Mini PCI User’s Guide 3. Then go to Start -> Run. Enter cmd in the Open box, then click OK. A DOS prompt window appears. 4. Then type net bridge show adapter. 5. T h e n t y p e n e t s h b r i d g e s e t a d a p t e r X forcecompatmode=enable, where X is your ethernet identifier. 6. T h e n t y p e n e t s h b r i d g e s e t a d a p t e r Y forcecompatmode=enable, where Y is your wireless identifier. 24 Wireless 11b Mini PCI User’s Guide 7. Right click the MSI Wireless LAN icon in the right bottom of system bar, choose View Available Wireless Network ---> Advanced. You will get Wireless Network Connection Properties window. Click Add to add a new wireless network connection. Click here 25 Wireless 11b Mini PCI User’s Guide 8. Enter a name for this new network in the Network name (SSID):, and put a check mark next to This is a computer-to-computer (Ad-hoc) network; wireless access point are not used. In this case, this computer will function as an access point, while other computers can use this network name (which is “aaa” in the picture below) to connect to. Once they connect successfully, they could access the ethernet LAN via Network Neighborhood. Enter SSID Check here Please also refer to Windows® XP help files for more information. 26 Wireless 11b Mini PCI User’s Guide 5. network connection This part describes how to prepare for connection to network and some basic outline of networking basics, including sharing files, printing from an computer on the network, or accessing the Internet on multiple computers with one connection. The following in Control Panel -> Network -> Configuration is required for all computers if you want to connect to a network: †Check Client for Microsoft Network is installed. †Check TCP/IP -> MSI NetDancer Wireless Network Adapter is installed. †Check File and printer sharing for Microsoft Networks. Preferred network list 27 Wireless 11b Mini PCI User’s Guide 5.1 Computer Identification Please verify that each computer has a unique name and common workgroup name, if you had previously given your Windows 98SE/ME/2000/XP computers names. 1. On your Desktop, right-click the icon My Network Places select Properties from the context menu. 2. Click the Identification tab in the dialog box. 3. In the Computer name box, type a unique, identifying name for this particular computer. This will be the name of this computer used by other computers on your network to communicate with. Each computer’s name must be unique on a particular network to avoid confusion. Please note that the computer’s name should not be more than 15 characters without space. Enter a name for your computer Your computer will belong to this workgroup Enter some information for reference 28 Wireless 11b Mini PCI User’s Guide 4.Type the workgroup name which this computer will belong to in the Workgroup box. All the computers on your network should have an identical Workgroup name. 5.The Computer Description box is optional. You may enter a description that helps to identify this computer on your network. Then click Close. 6.Repeat this process for each computer on your network to ensure that they all have unique “Computer Name” and identical “Workgroup”. 5.2 How to install TCP/IP By default, Windows® 98SE/ME/2000/XP will install TCP/ IP automatically. 1. Go to Start -> Settings -> Control Panel. 2. Double-click Network icon. 29 Wireless 11b Mini PCI User’s Guide 3. If you do see the TCP/IP network as the following screen, plese select MSI NetDancer Wireless Network Adapter and click Add. Click here 4. Select Protocal, and click Add. Click here 30 Wireless 11b Mini PCI User’s Guide 5. Select Microsort, then scroll down to select TCP/IP. Click Have Disk to install TCP/IP from a spicified drive (for Windows® 98SE/ME) or click OK (for Windows® 2000/XP). Please prepare a copy of the Windows® 98SE/ME/ 2000/XP installation disk/CD at hand if needed. Click here Click here Now TCP/IP installation is finished. 5.3 Configuring a dynamic IP address When the drivers are installed, the default setting here is set to obtain IP dynamically through a DHCP server. If you’d like check or change the settings, please follow the steps below: 1. Go to Start -> Settings -> Control Panel. 31 Wireless 11b Mini PCI User’s Guide 2. Double-click Network icon. 3. Select TCP/IP and then click Properties. Click here 32 Wireless 11b Mini PCI User’s Guide 4. When the TCP/IP Properties window appears, choose IP Address tab and check Obtain an IP Address Automatically. Check here 5. When the Network properties window comes back up, click OK. Then click Yes to reboot the computer. 5.4 Configuring a static IP address 1. Go to Start -> Settings -> Control Panel. 33 Wireless 11b Mini PCI User’s Guide 2. Double-click Network icon. 3. Select TCP/IP and then click Properties. Click here 34 Wireless 11b Mini PCI User’s Guide 4. When the TCP/IP Properties window appears, choose IP Address tab and select Specify an IP Address. Check here Enter static IP address 5. Enter an IP address into the empty field. Suggested IP Range is 172.16.0.2 to 172.16.0.254, and suggested Subnet Mask is 255.255.255.0 Then click OK. When the Network Properties window comes back up, click OK. Then click Yes to reboot the computer. IP Addresses must be signed uniquely to each network adapter. 35 Wireless 11b Mini PCI User’s Guide 5.5 Checking TCP/IP address For Windows® 98SE/ME: 1. Go to Start -> Run. 2. Enter command in the Open box. Click OK. Enter command here 3. A DOS prompt window appears. 4. Enter winipcfg and press Enter. 5. The IP Configuration screen will be displayed, and the IP address will be displayed in the IP Address box. Please make sure the configuration of IP Address, Subnet Mask and Default Gateway is correct. Click here 36 Wireless 11b Mini PCI User’s Guide 6. Click on More Info to display additional IP information. For Windows® 2000/XP: 1. Go to Start -> Run. 2. Enter cmd in the Open box. Click OK. 3. A DOS prompt window appears. 4. Enter ipconfig /all to display IP information. 37 Wireless 11b Mini PCI User’s Guide 5.6 Checking the connection by pinging This operation is for Infrastructure Network only. 1. Go to Start -> Run. 2. Enter command in the Open box. Click OK. 3. A DOS prompt window appears. 4. Type ping www.msi.com.tw (or any URL address), which is the the IP address of the Gateway in this case , and press Enter key. Then you’ll get replies if the pinging is successful. 38 Wireless 11b Mini PCI User’s Guide 5.7 Sharing files You may now open and save files on other computers once your computers are connected together on a network. You will also be able to specify particular folders or disk drives to “share” and even password to protect them. Please verify that each computer has a unique name and common workgroup name, if you had previously given your Windows® 98SE/ME/2000/XP computers names. Follw the steps below to share specific files and folders with other computers on your network. 1. On your Desktop, right-click the My Network Places icon and select Properties from the context menu. 2. You will configure your computers network settings in this dialog mostly. It is also available through the Network icon in the Control Panel. 3. Click File and Print Sharing. Click here 39 Wireless 11b Mini PCI User’s Guide 4. Check the box next to I want to be able to give others acccess to my files. 5. Then click OK on the File and Print Sharing dialog box. Check here 6. Click OK on the Network dialog box. 7. Provide the Windows® 98SE/2000/ME/XP CD or direct Windows to the proper location of the installation files if prompted. Then reboot if prompted. 8. Now you can identify a particular folder or disk drive to share, which means you can share a folder that both you and your family member/colleaque needs to access occassionally. You can also share your CD-ROM drive for others to use if your other computers do not have CD-ROM. Both of these processes are the same. Only the disk drives and folders that you specifically identify as shared will be accessible to other computers on your network. 9. Locate the disk drive or folder you want to share in Windows Explorer or the My Computer icon on your desktop. 10. Right-click the disk drive or folder and select Sharing. 40 Wireless 11b Mini PCI User’s Guide 11. Select Share As: to set the parameters for sharing this particular disk drive or folder. 12. The Share Name: box is used to identify the disk drive or folder you are sharing to other computers on the network, which can be helpful as more resources on your network for others. 13. The Comment: box is optional, which can be used to further describe the disk drive or folder for others on the network. 14. Access Type: allows you to designate how much someone else can do with this disk drive or folder. Read-Only only allows others to look at or open the files on the disk drive or in the folder. Full allows others to read, write, open, save, copy, move, and even delete files on the disk or in the folder. Depends on Password gives other computers access conditional on the password they provide. 41 Wireless 11b Mini PCI User’s Guide 15. Passwords: allow you to apply a level of security to your shared disk drives and folders. Any other computer (user) will be asked to enter the password you designate here before accessing the disk drive or folder. Two passwords are used to give two levels of security (or access) to others on the network using the Depends on Password setting. Leaving the Password boxes empty will give everyone on the network access to the disk drive or folder. 16. Click OK to continue. You will be prompted to enter the password(s) you provided for verification. Type the password(s) just as you entered them again. 17. Now you may access this disk drive or folder from another computer on your network. You may do so by double-clicking the My Network Places icon on your desktop or inside Windows Explorer. 18. Navigate to the computer with the shared disk drive or folder (recognized by the Computer Name you provided) and double-click. Now you should see the disk drive or folder, and double-click. If you specified a password when sharing this disk drive or folder, you will be asked for the password. 19. You can access a disk drive or folder shared over the network from most Windows ® 98/ME/2000/XP applications. You can map these disk drives and folers to a drive letter on another computer to make this process easier. For example, on a computer where you are accessing a shared folder from another computer, inside Windows Explorer right-click and select Map Network Drive. Now you are able to assign an available drive letter. Checking Reconnect at logon allows Windows to map this network drive each time when you start your computer. 42 Wireless 11b Mini PCI User’s Guide 6. troubleshooting This part describes the problems and corresponding solutions of driver installation. To check if the wireless network adapter drivers are loaded properly: 1. Go to Start -> Settings -> Control Panel. 2. Double-click System icon. 43 Wireless 11b Mini PCI User’s Guide 3. Click the Device Manager Tab. 4. Click the “+” symbol in front of Network Adapters. 5. Highlight MSI NetDancer Wireless Network Adapter. 6. Click Properties. 7. Check under Device Status to see if the card is working properly. 44 Wireless 11b Mini PCI User’s Guide 7. technical support Micro-Star International provides free technical support. If a problem arises with your system and no solution can be obtained from this user’s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance. Visit the MSI website for FAQ, technical guide, driver and software updates, and other information: http:// www.msi.com.tw/ Contact our technical staff at: support@msi.com.tw 45 Wireless 11b Mini PCI User’s Guide Index Access Point 1 Ad-hoc 3 Antenna 4 ASCII 18 Available Networks 14 Bridge Connections 23 CCK 4 channel 4 command 36 Computer Identification 28 Country 21 DBPSK 4 Device Manager 44 Device Status 44 DOS 24 DQPSK 4 DSSS 4 dynamic IP address 31 Encryption 4 46 Wireless 11b Mini PCI User’s Guide File and Print Sharing 39 File and printer sharing 27 Fragmentation Threshold 21 Gateway 36 golden finger, 8 hex-adecimal digital 14 IEEE802.11b 1 information 22 Infrastructure 1 InstallShield Wizard 11 interference 8 Internet 2 Key format 18 Key index 18 Key length 18 LAN 20 Link Quality 20 Local Area Connection 23 Mini PCI 1 MP11B 1 47 Wireless 11b Mini PCI User’s Guide MSI Wireless LAN 11 network key 13 Power LED 7 Power save 21 Preamble Type 21 Preferred network list 15 priority 15 Protocol 4 Radio 19 Range 4 RTS/CTS Threshold 21 Service Set Identifier 20 Signal Strengh 20 Speed 19 SSID 14 static IP address 33 Status 19 Subnet Mask 36 support 45 TCP/IP 27 WEP key 4 48 Wireless 11b Mini PCI User’s Guide Windows 1 winipcfg 36 Wireless Network Connection 23 Wireless Network Connection Properties 25 49
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2003:04:08 15:18:54Z Modify Date : 2003:04:09 10:38:19+08:00 Page Count : 55 Creation Date : 2003:04:08 15:18:54Z Author : tommychang Producer : Acrobat PDFWriter 4.0 for Windows Mod Date : 2003:04:09 10:38:19+08:00 Metadata Date : 2003:04:09 10:38:19+08:00 Title : D:\2003DA~1\MANUAL~4\MS6804V1.PDF Creator : tommychang Has XFA : NoEXIF Metadata provided by EXIF.tools