Micro Star MS6824 Wireless 11g Residential Gateway User Manual 01

Micro Star International Co Ltd Wireless 11g Residential Gateway 01

manual

Wireless 11g Residential Gateway MS-6824
FCC Caution 1. This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. FCC RF Radiation Exposure Statement: This equipment complies with the FCC RF radiation exposure limits set forth for uncontrolled environment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter." 3. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 4. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. 5. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
The material in this document is the intellectual property of MICRO-STARINTERNATIONAL. We take every care in the preparation of this document, but noguarantee is given as to the correctness of its contents. Our products are undercontinual improvement and we reserve the right to make changes without notice.Copyright NoticeTrademarksAll trademarks used in this manual are the sole property of their respective owners.Windows is a registered trademark of Microsoft Corporation.Revision Revision HistoryDateV 1.0First ReleaseMarch 2003Revision History
Important Safety PrecautionsAlways read and follow these basic safety precautions carefully when handling anypiece of electronic component.1. Keep this User’ s Manual for future reference.2. Keep this equipment away from humidity.3. Lay this equipment on a reliable flat surface before setting it up.4. The openings on the enclosure are for air convection hence protects theequipment from overheating.5. All cautions and warnings on the equipment should be noted.6. Never pour any liquid into the opening that could damage or causeelectrical shock.7. If any of the following situations arises, get the equipment checked by aservice personnel:Liquid has penetrated into the equipment.The equipment has been exposed to moisture.The equipment has not work well or you can not get it work according to User’ s Manual.The equipment has dropped and damaged.If the equipment has obvious sign of breakage.8. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-TIONED, STORAGE TEMPERATURE ABOVE 60O C OR BELOW -20OC, ITMAY DAMAGE THE EQUIPMENT.
Table of Contents1. Introduction.....................................................................................11.1 MSI RG54G - Wireless 11g Residential Gateway ................................................... 11.2 Networking Options ................................................................................................. 21.3 Features and Benefits ............................................................................................... 31.4 Package Contents ...................................................................................................... 41.5 System Requirements ............................................................................................... 41.6 Specifications ............................................................................................................ 52. Hardware installation .....................................................................62.1 Product View ............................................................................................................62.2 Connections .............................................................................................................. 72.3 LEDs ......................................................................................................................... 82.2 Installing Your RG54G ............................................................................................. 93. Configuration ..................................................................................103.1 Configuration Utility ................................................................................................ 103.2 Typical Configuration ............................................................................................... 133.3 Customized Configuration ........................................................................................ 17 3.3.1 System .............................................................................................................18 3.3.2 Internet ............................................................................................................ 20 3.3.3 LAN ................................................................................................................. 22 3.3.4 Wireless ...........................................................................................................24 3.3.5 NAT ................................................................................................................. 26 3.3.6 Firewall ............................................................................................................ 274. Technical Support ...........................................................................29Appendix ...............................................................................................30Assigning a Fixed IP Address .......................................................................................... 30
1Wireless 11g Residential Gateway RG54G User’s GuideMSI RG54G - Wireless 11g Residential GatewayMSI RG54G Residential Gateway (hereafter calledRG54G), compliant with IEEE802.11g, is designed forhigh throughput and fully function that leads you intothe wireless network environment. In the rapidgrowing network environment, MSI RG54G acts as ahome-end device that connects your computer to theWAN service (e.g. the Internet). With the RG54G,networking and sharing information throughout thehouse/office becomes an easy and flexible task. Inaddition, the RG54G is also a switching device as anaggregating point of the wireless LAN and wired LANclients, and as a router between LAN and WAN traffic.MSI RG54G combines the basic firewall, wireless AccessPoint, and LAN switch into one compact and stylishpackage to provide security and IP sharing function.These features build the RG54G as a cutting-edge, cost-effective device that fits to SOHO/home application.>>> 1.1Introduction
2Wireless 11g Residential Gateway RG54G User’s Guide>>> 1.2To build your network, you will need: - One MSI RG54G. - One or more network adapters/wireless networkadapters for computers. - One ISP (Internet Service Provider) account forconnecting to the Internet.Typical Configuration of Wireless LANNetworking OptionsMSI RG54G is a Base Station that bridges communica-tion between computers (via wireless networking), andconnects the computers to the Internet.You can use the RG54G in the following applications:Home connectivityA stand-alone wireless network.Broadband accessA wireless/wired Internet access via xDSL/Cable Modemor Ethernet.
3Wireless 11g Residential Gateway RG54G User’s GuideFeatures and BenefitsWith MSI RG54G, your network can immediatelyupgrade to a wireless network, providing wirelessaccess to the LAN and WLAN, and sharing informa-tion and printers in the network.54 Mbps Data Rate (max.)/150-500 ft. Indoor RangeThe RG54G runs with data-intensive applications likeMP3, multimedia, gaming and streaming video/audio -even through walls, floors and ceilings. You can getEthernet quality networking without wires and cables -ideal for standard networking requirements.Superior Antenna DesignDual dipole antennas provide superior polarized recep-tion and diversity transmission for the best signal quality.Interoperable with any 802.11g Compliant DeviceThe RG54G complies with IEEE 802.11g standard andWi-Fi, allowing full interoperability with any Wi-Fi certifiedwireless product.Easy to Install and UseThe Setup Wizard with user-friendly and Windows-basedinterface provides step-by-step instructions, making theRG54G fast and easy to be installed and used in thenetwork.WEP Security to Ensure PrivacySupports 64-/128-bit WEP encryption, which ensures thatyour network signal is secure and private inband andoutband of your home and office.ScalabilityThe RG54G can be configured in every way to meet yourneeds of specific applications and installations. It alsoprovides Flash memory for easy firmware upgrade.>>> 1.3
4Wireless 11g Residential Gateway RG54G User’s GuidePackage ContentsUnpack the package and check all the items carefully.If any item contained is damaged or missing, pleasecontact your local dealer immediately. Also, keep thebox and packing materials in case you need to shipthe unit in the future. The package should contain thefollowing items:One Wireless 11g Residential Gateway.One AC Power Adapter, 5VDC/2A output.One Ethernet cable (RJ-45).One Quick Installation Guide.One CD title including drivers, utilities, user’s manualand quick guide.System RequirementsAfter installing the RG54G, you need the followings toconfigure respective network settings:A Computer with Windows operating system and in-stalled with Ethernet adapter.A JavaScript-enabled web browser, such as InternetExplorer 6.0 and later.>>> 1.4>>> 1.5
5Wireless 11g Residential Gateway RG54G User’s GuideSpecification>>> 1.6Standards - IEEE802.11g.LAN Connection - Four auto-negotiating 10/100Mbps RJ-45 ports.WAN Connection - One 10Mbps Ethernet port for connecting to thexDSL/Cable Modem.Internet Protocol Support - TCP/IP, NAT, DHCP, HTTP, FTP, PPPoE, DDNS.Operating System Support - Microsoft Windows 98SE/Me/2000/XP.LEDs - Power, LAN (1~4), WAN, Wireless network.Environmental and Physical - Dimension: 180 x 127.2 x 32.2mm (L x W x H). - Weight: TBDg. - Operating Temperature: 0OC to 50OC. - Storage Temperature: -25OC to 70OC. - Humidity: 5% to 95%, non-condensing.EMI Compliance - FCC Class B, CE Class B.
6Wireless 11g Residential Gateway RG54G User’s GuideHardware InstallationThis chapter provides a quick introduction to yourRG54G, including product view, installation and powerup.Product View>>> 2.1Front ViewRear View
7Wireless 11g Residential Gateway RG54G User’s GuideReset Button 1. Press and hold* this button longer than 5 secondsto restart the RG54G. 2. Press and hold* this button longer than 8 seconds,the system will reload the factory default settings.LAN Ports 1~4The RG54G provides four 10/100 Mbps RJ-45 ports,allowing connection to the computers and other networkdevices.WAN PortThis 10 Mbps Ethernet port provides connection to yourxDSL/Cable Modem or Ethernet connection.Power ConnectorConnect the enclosed power adapter and provide powerto the RG54G.Connections>>> 2.2LAN Ports 1~4 DMZ Port PowerReset WAN Port USB Port* Use a pointed object (e.g. a stretched clip)
8Wireless 11g Residential Gateway RG54G User’s GuidePowerA steady Blue light glows to indicate the power adapter isconnected.LAN 1~4The Green light glows when there is a computer/deviceconnected to respective port.WANA Green light glows when the system connects to thexDSL/Cable Modem or Ethernet connection, and it willblink when receiving/transmitting data on the link.Wireless StatusA Green light glows to indicate the status of RG54G’swireless networking.LEDs>>> 2.3
9Wireless 11g Residential Gateway RG54G User’s Guide>>> 2.4 Installing Your RG54GPositioningThe RG54G can be put on a flat surface or can bemounted on the wall. Before connecting the RG54G toyour devices, please note that the it should be placed in alocation where is: - Easy to access; so that you can convenientlyconnect it to the xDSL/Cable Modem through theWAN port, and to the computers/devices through theLAN ports. - Allows you to observe the LEDs clearly; so that youmay monitor the real-time networking status andtake instant measures as problems arise.Connecting Cables 1. Plug the DC end of the power adapter into thepower connector of the RG54G (see page 7, Con-nections), and the AC end to the wall outlet later. 2. To connect the Internet, use the suitable cable toconnect the RG54G’s WAN port to your xDSL/CableModem. 3. For wired connection, connect your computers/devices to the LAN ports (1~4) on the RG54G (seepage 7, Connections). 4. For wireless connection, install the wireless adapt-ers onto your computers, and you have to configuresettings to take full advantages of the RG54G.Power UpWhen the DC end of the power cable is connected to theRG54G, plug the AC end to the wall outlet. The RG54G ispowered up immediately.
10Wireless 11g Residential Gateway RG54G User’s Guide>>> 3.1 Configuration UtilityThe MSI RG54G provides you a convenient utility tocustomize the network settings. Whenever you wantto configure the respective settings, open your webbrowser (e.g. Internet Explorer), and type the default IPaddress 192.168.1.254 in the Address bar and press[Enter]. Then, type admin in the User Name box andadmin in the Password box*, and click OK.* admin is the defaultpassword of the wirelessgateway, and can bechanged in the Configu-ration Utility. See section3.3.1 for details.Check this option tosave the settingsClickEnter the User Nameand PasswordOpen the web browser and enter theIP Address of the wireless gatewayConfiguration
11Wireless 11g Residential Gateway RG54G User’s GuideThe Home window of the configuration utility willappear as below, which provides two options toselect: Typical Configuration and Customized Con-figuration.Typical Configurationprovides a step-by-step Setup Wizard to guide youthrough the basic settings of the gateway. Generally,after completing the four steps in this option, yourgateway can connect to the ISP and your client compu-ter can access to the Internet without any problem.Customized Configurationallows you to customize the network settings of yourgateway for some specific purposes, such as chang-ing password, updating firmware, and other networksettings.Home Window of the Configuration Utility
12Wireless 11g Residential Gateway RG54G User’s GuideBefore you beginIt’s best to use a computer (with an Ethernet adapterinstalled) that connected to a switch for configuringyour RG54G. Also, you will need to assign a fixed IPaddress to this computer within the IP address rangeof the RG54G. For example, you can assign a fixed IPaddress of 192.168.1.253 with a Subnet Mask of255.255.255.0. (For more instruction, please refer toAppendix, Assigning a Fixed IP Address.)Factory Default Settings of the RG54GSSID RG54GChannel 7User Name adminPassword adminIP Address 192.168.1.254Subnet Mask 255.255.255.0Encryption Disable
13Wireless 11g Residential Gateway RG54G User’s GuideTypical ConfigurationClick Typical Configuration, and the Setup Wizardappears from Step 1 to guide you through the configu-ration.Setting the Time ZoneFirst, you should set the Time Zone. For system man-agement purpose, a correctly time zone setting will letyou have accurate time stamps on the system log.If you are in the area that within the daylight saving period,please also check the Daylight Saving option.When completed, click Next to continue step 2.Step 1.The Menu BarDuring the Setup Wizard, whenever you click HOME inthe menu bar will make you return to the Homewindow; click Logout to exit the Configuration Utility.Step 1. Setting the Time ZoneThe Menu BarThe Menu Bar>>> 3.2
14Wireless 11g Residential Gateway RG54G User’s GuideSetting the Broadband TypeAccording to the connection type your are using, click therespective option to configure the settings.Step 2.Step 2. Setting the Broadband TypeIn case your ISP provides you a Host Name or alocked MAC Address, you should enter these informa-tion in the respective fields.Setting the Broadband Type (continue)Cable ModemIf your broadband access is through a cable modem,select this option.Step 3Note: If you are notsure on these settings,please ask your ISPfor assistance.
15Wireless 11g Residential Gateway RG54G User’s GuideFixed-IP ADSLIf your broadband access is through an ADSL modemand your ISP assigned you a static IP address, selectthis option.Enter the necessary information such as IP address,Subnet Mask, Default Gateway and DNS serverprovided by your ISP in the respective fields.ADSLIf your broadband access is through an ADSL modemand your ISP did not assign you a static IP address,select this option.Enter the necessary information such as user nameand password provided by your ISP in the respectivefields. In case your ISP gave you a service name, youshould put it to the respective field.When completed, click Next to continue step 4.Note: If you are notsure on these settings,please ask your ISPfor assistance.
16Wireless 11g Residential Gateway RG54G User’s GuideSetting the Wireless Network SettingsYou could set the SSID (Network Name) and channel foryour wireless gateway.Step 4.When completed, click Finish to save your settings. TheApply window appears on the screen, click Continue toclose the configuration utility and return to the Homewindow.
17Wireless 11g Residential Gateway RG54G User’s GuideCustomized ConfigurationTypically your wireless gateway will have no problemto connect to your ISP and let internal clients toaccess to the Internet without any problem after goingthrough all steps in Typical Configuration. If you wantto customize your wireless gateway for some specificpurposes, you may perform the configuration here.Click Customized Configuration, and the main windowappears as below.Main Window of Customized ConfigurationThe Menu BarThere is a menu bar in the top of the CustomizedConfiguration window, where contains two options toexit the configuration window (HOME and Logout, asdescribed in page 15); and seven options for ad-vanced configuration: System, Internet, LAN, Wire-less, NAT, and Firewall, each one allows you toconfigure the respective settings and view the systemstatus.The Menu Bar>>> 3.3
18Wireless 11g Residential Gateway RG54G User’s GuideSystemThis page includes all the basic configuration tools suchas options to control management access, upgradesystem firmware and restart system.3.3.1Time ZoneFor system management purpose, a correctly time zonesetting will let you have accurate time stamps on thesystem log. If you uses the wireless gateway in thecountry adopting the Daylight Saving Time, please checkthe Daylight Saving option.Password SettingThe wireless gateway is shipped with default passwordadmin. This option allows you to use other password toreplace the old password. First, enter the old password,and then enter the new password twice to confirm thepassword changed. Then, click Apply to save thesettings.This window includes:Time ZonePassword SettingRemote ManagementFirmware UpgradeRestartFactory DefaultSystem StatusStatisticsEvent LogOld PasswordNew PasswordChanging the passwordTip: Once you havechanged the settingsin each option, clickApply to save thesettings, or Cancel toabandon. ClickingHelp can bring up thehelp window.
19Wireless 11g Residential Gateway RG54G User’s GuideRemote ManagementSetting to Enable allows you to manage your wirelessgateway through WAN connection (via port 8080).Firmware UpgradeOnce you obtained a new version of firmware (e.g.downloading form the MSI website), you can update thefirmware of your wireless gateway. Click Browse to pointto the firmware file, and then click Upgrade to start.RestartYou may restart your gateway through the ConfigurationUtility without unplugging the power cable or pressing theReset button longer than 5 seconds.Factory DefaultYou may re-load the factory settings of your gateway. Thisfunction is the same as pressing the Reset button longerthan 8 seconds.System StatusThis option contains detail information of your wirelessgateway, including general information and respectivenetwork settings.StatisticsThis option contains the statistics of your gateway, suchas respective networking statistics, allowing you tomonitor the device clearly. Click Refresh to re-load thestatistics.Event LogYou can enable or disable logging function of yourgateway. Once enabled, click View can bring up theSession Event Log window to display the log file.Click to view the logEnable this function
20Wireless 11g Residential Gateway RG54G User’s Guide3.3.2This window includes:Connection TypeMAC CloneConnection TypeThis option allows you to configure the way to connect toyour ISP. The wireless gateway can be connected to yourISP in any of the following ways: DHCP Client, PPPoE,and Fixed IP.DHCP Client - If your ISP gives you a host name, selectthis option to enter the respective information.InternetIn the Internet settings window, you can configure the wayyour wireless gateway used to connect to your ISP. Also,we support DDNS for you to run your domain over achanging IP.Enter the Host nameSetting the Host NamePPPoE - If you use xDSL modem to connect to the ISP,select this option and enter the necessary information,including the Username, Password, Connect Option, andDisconnect Option. If your ISP gives you a service name,you should put it to the related field.
21Wireless 11g Residential Gateway RG54G User’s GuideFixed IP - If your ISP assigns a fixed IP Address, selectthis option and enter the necessary information, includingIP Address, Subnet Mask, Default Gateway, Primary DNS,and Secondary DNS.Connecting SettingsIP Address SettingsMAC CloneIf your ISP restricts to PCs only, use this function to copy aPC Media Access Control (MAC) address to your wirelessgateway. This procedure will cause the wireless gatewayto appear as a single PC.PPPoE Settings InformationSetting fixed IP Address
22Wireless 11g Residential Gateway RG54G User’s GuideLANIn the LAN settings window, you can configure the IPaddress and DHCP server for your wireless gateway.3.3.3IP SettingYou can setup IP address* information for the LAN portsof your gateway.DHCP ServerYour wireless gateway can act as a DHCP server, andassigns IP addresses to your clients automatically. Theassigned IP addresses will be within the range of IP poolthat you have specified in this option. For example, notincluding the default IP address 192.168.1.254 of theLAN port, you can configure the range from 192.168.1.1 to192.168.1.253.This window includes:IP SettingDHCP ServerDHCP Client ListMAC FilterUPNP Setting* The default IP Address for the LAN Port is 192.168.1.254; and for DMZ port is 192.168.2.254. See Appendix B for details.
23Wireless 11g Residential Gateway RG54G User’s GuideDHCP Client ListThis option is used to display the DHCP clients assignedby the DHCP server, including the LAN port and DMZ port.Click Refresh to re-load the statistics.MAC FilterThis option is used to setup the Proxy DNS, which is as aDNS server for the Internal and DMZ networks.UPNP SettingSetting to Enable allows your wireless gateway to be anUPNP manageable device.
24Wireless 11g Residential Gateway RG54G User’s GuideWirelessIn this section, you can configure all wireless relatedsettings for your wireless gateway.3.3.4SSID & ChannelThis option is used to set the SSID (Network Name) andchannel for your wireless gateway. If you have changedthe SSID or Channel settings, click Apply to save thesettings.This window includes:SSID & ChannelRadio SettingEncryptionAssociated Client ListAssociation Control* These settings are for advanced users or MIS staff only. If you do not know how to set these parameters, it is recommended to use the default value.Radio SettingThis option allows you to configure the operation param-eters of the AP radio settings*.The wirelessgateway’s SSIDSelect the Channelsetting from thedrop-down list box. Setting SSID and Channel
25Wireless 11g Residential Gateway RG54G User’s GuideAssociated Client ListThis option is to display information of stations that arecurrently associating to your wireless gateway.Association ControlThis option allows you to control which PC can connect tothe wireless LAN. If you enabled this feature, only PCswith MAC address located in Association Control List canconnect to the wireless LAN.Setting WEPEnable WEPEncryptionThis option allows you to configure the setting of dataencryption. WEP key must be set before the dataencryption is enforced.
26Wireless 11g Residential Gateway RG54G User’s GuideNATNAT (Network Address Translation) allows multiple usersat your local site to access the Internet over a single-useraccount. It can also prevent hacker attacks by mappinglocal addresses to public addresses for key services,such as Web or FTP.3.3.5Virtual ServerYou can configure the wireless gateway as a virtualserver, so that remote users can access the services(e.g. Web or FTP) at your local site via public IP ad-dresses. It also includes a list of Virtual Server if youhave setup (maximum 12 entries).Special ApplicationsSome special applications, such as Internet gaming,video conference and Internet telephony, require multipleconnections. This feature allows these applications towork properly. It also includes a list of Special Applica-tions if you have setup (maximum 12 entries).This window includes:Virtual ServerSpecial Applications
27Wireless 11g Residential Gateway RG54G User’s GuideFirewallThe wireless gateway provides extensive firewall protec-tion by restricting connection parameters to limit the riskof hacker attacks, and defending against a wide array ofcommon hacker attacks. However, for applications thatrequire unrestricted access to the Internet, you canconfigure a specific client/server as a demilitarized zone.3.3.6This window includes:Firewall ControlFiltersIP BlockVirtual DMZFirewall ControlYou can enable or disable the firewall function in thisoption.FiltersYou can use this window to create and apply filters thatcan selectively block traffic to pass in and out of yournetwork according to Protocol Type or Port Number. Italso includes a list of Filters if you have setup (maximum36 entries).IP BlockYou can use this window to create and apply filters thatcan selectively allow traffic to pass in and out of yournetwork according to the IP addresses. It also includes alist of Filters if you have setup (maximum 6 entries).Virtual DMZIf you have a local client PC that cannot run an Internetapplication properly from behind the NAT firewall, you canopen the client up to unrestricted two-way Internet accessby defining a virtual DMZ. It also includes a list of DMZ ifyou have setup (maximum 6 entries).
28Wireless 11g Residential Gateway RG54G User’s GuideIP BlockYou can use this window to create and apply filters thatcan selectively allow traffic to pass in and out of yournetwork according to the IP addresses. It also includes alist of Filters if you have setup (maximum 6 entries).Virtual DMZIf you have a local client PC that cannot run an Internetapplication properly from behind the NAT firewall, you canopen the client up to unrestricted two-way Internet accessby defining a virtual DMZ. It also includes a list of DMZ ifyou have setup (maximum 6 entries).
29Wireless 11g Residential Gateway RG54G User’s GuideVisit the MSI website for FAQ, technical guide, driver andsoftware updates, and other information:http://www.msi.com.tw/Contact our technical staff at: support@msi.com.twTechnical Support
30Wireless 11g Residential Gateway RG54G User’s GuideAppendix- Assigning a Fixed IP AddressTo configure the RG54G, you will need to assign afixed IP address to this computer within the IP ad-dress range of the RG54G.Under Windows 98SE/ME 1. Go to Start -> Settings -> Control Panel. 2. Double-click the Network icon. 3. The Network window appears as below. SelectTCP/IP item, and click Properties to bring up theTCP/IP Properties window.Select thisClick
31Wireless 11g Residential Gateway RG54G User’s Guide 4. Choose IP Address tab and check Specify anIP Address. Then, enter an IP address into theempty field. Suggested IP Address Range is192.168.1.1 to 192.168.1.253, and suggestedSubnet Mask is 255.255.255.0.Check thisEnter a fixed IPaddress andSubnet Mask 5. Click OK. Then, click Yes when prompted toreboot the computer.
32Wireless 11g Residential Gateway RG54G User’s GuideUnder Windows 2000/XP 1. Click Start and choose Control Panel to openthe Control Panel window. 2. Double-click the Network Connection icon toopen the Network Connection window. 3. Right-click the Network Adapter icon and clickProperties from the shortcut menu.Click 4. When the Connection Properties windowappears, choose General tab and selectInternet Protocol [TCP/IP], and click Proper-ties to bring up the Internet Protocol [TCP/IP] Properties window. 5. Check Use the following IP address. Then,enter an IP address into the empty field. Sug-gested IP Address Range is 192.168.1.1 to192.168.1.253, and suggested Subnet Mask is255.255.255.0.
33Wireless 11g Residential Gateway RG54G User’s GuideSelect thisClickCheck thisEnter a fixed IPaddress andSubnet Mask 6. Click OK to complete the configuration.Configuring a fixed IP address

Navigation menu