Micro Star MS6855C2 Notebook User Manual F 2007 Communication 6855C EMI

Micro Star International Co Ltd Notebook F 2007 Communication 6855C EMI

Manual

iMP54GBT3 (MS-6855C)Wireless 11g + Bluetooth Combo MiniPCI CardUser’s GuidePDF created with pdfFactory Pro trial version www.pdffactory.com
FCC Caution 1. The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. FCC Statement This device is intended only for OEM integrators under the following RF exposure warning · This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. SAR Value: Max. SAR Measurement (1g) 802.11b: 0.331 W/kg 802.11g: 0.223 W/kg Important Note In the event that these conditions can not be example certain laptop configurations or colocation with another transmitter), then the FCC authorization is no longer considered valid the FCC ID can not be used on the final product. In these circumstances, OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. ii
iiiEnd Product LabelingThis transmitter module is authorized only for use in device where antenna may beinstalled such that 2.5cm may be maintained between antenna and users (for exampleaccess points, routers, wireless ADSL and similar equipment). The final end productmust be labeled in a area with the following: “ Contains TX FCC ID: I4L-MS6855C2”.Manual Information for End UsersThe end user must not have manual instructions to remove or install device. The usermanual for end users must include the following information in a prominent location:“IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements,the antenna used for this transmitter must be installed to provide a separation distance ofat least 20 cm from all persons and must not be co-located operating in conjunction withany other antenna or transmitter.” as a result of e-mail transmission.”Important Safety PrecautionsAlways read and follow these basic safety precautions carefully when handling anypiece of electronic component.1. Keep this User’s Guide for future reference.2. Keep this equipment away from humidity.3. Lay this equipment on a reliable flat surface before setting it up.4. The openings on the enclosure are for air convection hence protects theequipment from overheating.5. All cautions and warnings on the equipment should be noted.6. Never pour any liquid into the opening that could damage or cause electricalshock.7. If any of the following situations arises, get the equipment checked by aservice personnel:Liquid has penetrated into the equipmentThe equipment has been exposed to moistureThe equipment has not work well or you can not get it work according to User’s ManualThe equipment has dropped and damagedIf the equipment has obvious sign of breakage8. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENTUNCONDITIONED, STORAGE TEMPERATURE ABOVE 60O C ORBELOW -20OC, IT MAY DAMAGE THE EQUIPMENT.PDF created with pdfFactory Pro trial version www.pdffactory.com
1IntroductionMSI MP54GBT3, the Wireless 11g + Bluetooth Combo miniPCICard, is a Type IIIB card, which can be used to integrate withsuch systems as notebook, mini-barebone, PDA, portable PC.With MSI MP54GBT3 embedded inside, a system could pro-vide users with the ability and flexibility to connect up to Internetwirelessly via 802.11g with speed up to 54Mbps, and to linkwith peripherals wirelessly through BluetoothTM v2.0 and ad-vanced EDR (Enhanced Data Rate) technology. BluetoothTMv2.0 technology increases the data rate of BluetoothTM v1.1/1.2from 1.0Mbps to 2.1Mbps.MSI MP54GBT3 is taking advantage of leading technologiesfrom Ralink and CSR. It addresses the co-existence issues inPAN (Personal Area Network) and WLAN (Wireless Local AreaNetwork) markets by providing true simultaneous connectivitywhile deploying IEEE 802.11g and Bluetooth v2.0 Along withthis combo solution, a system installed with a single card is ableto offer dual mode capability of WiFi and BluetoothTM. It willbenefit system vendors in miniaturization of system dimensionand BOM cost reduction, as well as also make users happy withthe all-in-one functionality.>>> 1.1 MP54GBT3 (MS-6855C) - Wireless 11g + Bluetooth Combo MiniPCI CardPDF created with pdfFactory Pro trial version www.pdffactory.com
General Introductions Chapter 1 Getting Started Chapter 2 Customizing this Notebook Chapter 3 BIOS setup Chapter 4 Preface G52-10581X1
II Preface Regulations Information FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: w Reorient or relocate the receiving antenna. w Increase the separation between the equipment and receiver. w Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. w Consult the dealer or an experienced radio TV technician for help. NOTE 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Shield interface cables and AC power cord, if any must be used in order to comply with the emission limits.
III Preface FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
IV Preface Safety Guideline for Using Lithium Battery (Danish) ADVARSEL! Lithiumbatteri --- Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af same fabrikat og type. Levé det brugte batteri tilbage til leverandøren. (Deutsch) VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. (English) CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer’s instructions. (Finnish) VAROITUS: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan valmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. (French) ATTENTION: II y a danger d’ex;losion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du meme type ou d’un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usages conformément aux instructions du fabricant. (Norwegian) ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. Benytt same batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres I henhold til fabrikantens instruksjoner. (Swedish) VARNING: Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruction.
V Preface Caution on Using Modem 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 3. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. 4. Use caution when installing or modifying telephone lines. 5. Avoid using the telephone function (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 6. Do not use the telephone function to report a gas leak in the vicinity of the leak. Optical Disc Drive Notice CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.” To prevent direct exposure to the laser beam, do not try to open the enclosure.
VI Preface Macrovision Notice This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Safety Instructions 1. Read the safety instructions carefully and thoroughly. 2. Save this User Guide for possible use later. 3. Keep this equipment away from humidity and high temperature. 4. Lay this equipment on a stable surface before setting it up. 5. The openings on the enclosure are used for air convection and to prevent the equipment from overheating. Do not cover the openings. 6. Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the equipment to the power inlet. 7. Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. 8. Always unplug the power cord before inserting any add-on card or module. 9. All cautions and warnings on the equipment should be noted.
VII Preface 10. If any of the following situations arises, get the equipment checked by a service personnel: w The power cord or plug is damaged. w Liquid has penetrated into the equipment. w The equipment has been exposed to moisture. w The equipment has not worked well or you can not get it work according to User’s Manual. w The equipment was dropped and damaged. w The equipment has obvious signs of breakage. 11. Never pour any liquid into the opening that could damage the equipment or cause an electrical shock. 12. Do not leave the equipment in an unconditioned environment with a storage temperature of 60OC (140OF) or above, which may damage the equipment. 13. To prevent explosion caused by improper battery replacement, use the same or equivalent type of battery recommended by the manufacturer only.
VIII Preface WEEE Statement (English) Under the European Union ("EU") Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of "electrical and electronic equipment" cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. (Deutsch) Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden, die sich auf 13.August, 2005 wirken. Und der Hersteller von bedeckt Elektronik-Altgeräte gesetzlich zur gebrachten Produkte am Ende seines Baruchbarkeitsdauer zurückzunehmen. (Français) Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer certains produits en fin de vie. (Русский) В соответствии с директивой Европейского Союза (ЕС) по предотвращению загрязнения окружающей среды использованным электрическим и электронным оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13 августа 2005 года, изделия, относящиеся к электрическому и электронному оборудованию, не могут
IX Preface рассматриваться как бытовой мусор, поэтому производители вышеперечисленного электронного оборудования обязаны принимать его для переработки по окончании срока службы. (Español) Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como "eléctricos y equipos electrónicos" no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. (Nederlands) De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus.. (Srpski) Po Direktivi Evropske unije ("EU") o odbačenoj ekektronskoj i električnoj opremi, Direktiva 2002/96/EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi koji spadaju pod "elektronsku i električnu opremu" ne mogu više biti odbačeni kao običan otpad i proizvođači ove opreme biće prinuđeni da uzmu natrag ove proizvode na kraju njihovog uobičajenog veka trajanja. (Polski) Zgodnie z Dyrektywą Unii Europejskiej ("UE") dotyczącą odpadów produktów elektrycznych i elektronicznych (Dyrektywa 2002/96/EC), która wchodzi w życie 13 sierpnia 2005, tzw. “produkty oraz wyposażenie elektryczne i elektroniczne " nie mogą być traktowane jako śmieci komunalne, tak więc producenci tych produktów będą zobowiązani do odbierania ich w
X Preface momencie gdy produkt jest wycofywany z użycia. (TÜRKÇE) Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır. (ČESKY) Podle směrnice Evropské unie ("EU") o likvidaci elektrických a elektronických výrobků 2002/96/EC platné od 13. srpna 2005 je zakázáno likvidovat "elektrické a elektronické výrobky" v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti. (MAGYAR) Az Európai Unió („EU") 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. (Italiano) In base alla Direttiva dell’Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita..
XI Preface Trademarks All trademarks are the properties of their respective owners. w Microsoft is a registered trademark of Microsoft Corporation. Windows®98/ME, 2000/XP are registered trademarks of Microsoft Corporation. w AMI® is a registered trademark of American Megatrends Inc. Release History Version Revision Note Date 1.0 First Release April 2006
XII Preface Preface Regulations Information.....................................................................................II FCC-B Radio Frequency Interference Statement........................................II FCC Conditions............................................................................................III Safety Guideline for Using Lithium Battery....................................................IV Caution on Using Modem...................................................................................V Optical Disc Drive Notice...................................................................................VI Macrovision Notice.............................................................................................VI Safety Instructions.............................................................................................VI WEEE Statements.............................................................................................VIII Trademarks..........................................................................................................XI Release History...................................................................................................XI Introductions How to Use This Manual..................................................................................1-2 Unpacking..........................................................................................................1-4 Table of Content
XIII Preface Getting Started Specification......................................................................................................2-2 Product View.....................................................................................................2-6 Top-open View............................................................................................2-6 Front View...................................................................................................2-8 Right-side View.........................................................................................2-10 Left-side View...........................................................................................2-12 Rear View.................................................................................................2-14 Bottom View..............................................................................................2-15 Power Management........................................................................................2-17 AC Adapter................................................................................................2-17 Battery Pack.............................................................................................2-19 Using the Battery Pack.............................................................................2-22 Basic Operations............................................................................................2-24 Safety and Comfort Tips...........................................................................2-24 Have a Good Work Habit.........................................................................2-25 Knowing the Keyboard.............................................................................2-26 Knowing the Touchpad.............................................................................2-31 About Hard Disk Drive..............................................................................2-35 Using the Optical Storage........................................................................2-36
XIV Preface Customizing this Notebook Connecting the External Devices...................................................................3-2 Connecting the Peripheral Devices...........................................................3-3 Connecting the Communication Devices...................................................3-6 Express PC Card Installation..........................................................................3-7 Installing the Express card.........................................................................3-7 Removing the Express card.......................................................................3-7 Safely Remove Hardware.................................................................................3-8 BIOS Setup About BIOS Setup.............................................................................................4-2 When to Use BIOS Setup..........................................................................4-2 How to Run BIOS Setup.............................................................................4-2 Control Keys...............................................................................................4-3 BIOS Setup Menu..............................................................................................4-4 Main menu..................................................................................................4-5 Advanced menu..........................................................................................4-7 Security menu.............................................................................................4-8 Boot menu.................................................................................................4-10 Exit menu..................................................................................................4-11
General Introductions Chapter 1 Getting Started Chapter 2 Customizing this Notebook Chapter 3 BIOS setup Chapter 4 Preface
1-2 General Introductions Congratulations on becoming a new user of this notebook, the finely designed notebook. This brand-new exquisite notebook will give you a delightful and professional experience in using notebook. We are proud to tell our users that this notebook is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction. How to Use This Manual This User’s Manual provides instructions and illustrations on how to operate this notebook. It is recommended to read this manual carefully before using this notebook. Chapter 1, General Introductions, includes the descriptions of all the accessories of this notebook. It is recommended to check out that if you have all the accessories included when you open the packing box. If any item is damaged or missing, please contact the vendor where you purchased this notebook. Chapter 2, Getting Started, provides the specification of this notebook, and introduces the function buttons, quick launch buttons, connectors, LEDs and externals of this notebook. Also, this chapter instructs the correct procedure of installing or uninstalling the battery pack, and the brief ideas on how to use this notebook. Chapter 3, Customizing this Notebook, gives instructions not only in
1-3 General Introductions connecting the mouse, keyboard, webcam, printer, external monitor, IEEE 1394 devices, and communication devices, but also in installing and removing the PC card. Chapter 4, BIOS setup, provides information on BIOS Setup program and allows you to configure the system for optimum use.
1-4 General Introductions Unpacking First, unpack the shipping carton and check all items carefully. If any item contained is damaged or missing, please contact your local dealer immediately. Also, keep the box and packing materials in case you need to ship the unit in the future. The package should contain the following items: w Notebook w User’s Manual or Quick Start Guide w All-in-one software DVD containing the drivers and utilities and optional recovery function. w High-capacity Li-ion battery pack w AC adapter and power cord w Phone cable/Phone jack (optional) w Notebook carry bag (optional) These accessories listed above may change without notice.
General Introductions Chapter 1 Getting Started Chapter 2 Customizing this Notebook Chapter 3 BIOS setup Chapter 4 Preface
2-2 Getting Started Specification Physical Characteristic Dimension 303mm(L) x 225mm(D) x 28-30mm(H) Weight 1.9 kg CPU Processor Type Socket S1 (638pins, uPGA) Support Processor Turion 64 bit Taylor Processor Sampron single core L1 Cache 64KB L2 Cache 512K/1M FSB Speed 800MHz Core Chips North Bridge ATI RS485M South Bridge ATI SB460 Memory Technology DDR II 400/533/667 MHz Memory DDRII SO-DIMM X 2 slots 256/512/1024MB DDR SDRAM Maximum 2GB (1024MB DDR SO-DIMM X 2) Power AC Adapter 90W, 19 Volt Battery Type 4 cells (Li-lon)(2200mAh)(standard) 8 cells (Li-lon)(4400mAh)(optional)
2-3 Getting Started Storage HDD form factor 2..5”, 9.5mm(H), 40/60/80/100/120GB HDD PATA IDE Controller SB460 Optical Device COMBO/DVD dual/Super Multi I/O Port Monitor(VGA) 15 pin Mini D-Sub x 1 USB x 3 (USB version 2.0) Headphone Out/ SPDIF Out x 1 IEEE1394 x 1 Mic-in x 1 RJ11 x 1 RJ45 x 1 Card Reader 3-in-1 (MMC,SD,MS) Express Card x 1 Communication Port 56K Fax/MODEM MDC1.5 (Azalia) I/F --- Azalia modem Wake on Ring --- Support on S3/S4 (AC Mode) state PTT Approval --- Yes (FCC/CTR21/JATE) LAN GigaLan (10/100/1000) PCIE LAN Controller --- Realtek 8111B Wake on LAN --- Support on S3/S4/S5 state
2-4 Getting Started Wfm 2.0 support Wireless LAN MS-6833B or MS-6855B BG Mini PCI-E card Display LCD Type 12.1” WXGA (Glare type) Brightness Brightness controlled by K/B hot-keys Video Controller UMA ATI RS485M VRAM Shared System Memory LCD 1280 x 800 WXGA CRT Support 640x480, max, 32bit color 800x600, max, 32bit color 1024x768, max, 32bit color 1152x768, max, 32bit color 1280x800, max, 32bit color 1400x1050, max, 32bit color 1600x1200, max, 32bit color Display Detect System auto detect LCD or CRT: 1. Display to CRT - only if LCD lid is closed; 2. Display to LCD - only if no CRT detected; 3. Display can scan CRT & LCD simultaneously if both are detected and activate. Audio
2-5 Getting Started Sound Codec chip Azalia interface, ALC 882 Sound Controller Embedded in South Bridge Internal Speaker 2 Speakers (1.5W) with housing Sound Volume Adjust by volume button, K/B hot-key & SW Software & BIOS USB Flash Boot Yes, USB floppy boot up DOS only BIOS Fast Boot Support --- Yes Others Kensington Lock Hole x 1 Compliance WHQL --- Windows XP/Windows Vista
2-6 Getting Started Product Overview This section provides you the description of basic aspects of your Notebook. It will help you to know more about the appearance of this Notebook before using it. Top-open View Press the Cover Latch to open the top cover (LCD Panel). The figure of top-open view and description showing below will lead you to browse the main operating area of your NOTEBOOK. 2 1 3 4 5 6
2-7 Getting Started 1. Cover Latch (Internal View) It is a bounce-back device to lock the cover with the deck when closing your Notebook. 2. Rubber Pads Protect your Notebook from random closing. 3. Stereo Speakers Make high quality sound blaster with stereo system and Hi-Fi function supported. 4. Quick Launch Buttons and Power Button Power Button: To turn your Notebook power ON and OFF. Quick Launch Buttons: Simply click the quick launch buttons to speed up the starting of the programs in common use. It helps you to do works more efficiently. 5. Keyboard The built-in keyboard provides all the functions of a full-sized 86-key (US-defined) keyboard. 6. Touchpad It is the pointing device of the Notebook. .
2-8 Getting Started Front View 1. Cover Latch (External View) Press Cover Latch rightward and lift the cover. The Cover Latch will bounce back when loosing it. 2. IEEE 1394 The IEEE 1394 port is a high-speed bus that allows you to connect high-end digital devices such as the DV (digital video camera). 3. Audio Port Connectors Make high quality sound blaster with stereo system and Hi-Fi function supported. Line In: Used for external CD player, tape recorder or other audio devices. Line Out: A connector for speakers or headphones. 2 1 3 4
2-9 Getting Started 4. Status LED Num Lock: Glowing Blue when the Num Lock function is activated. Caps Lock: Glowing Blue when the Caps Lock function is activated. Scroll Lock: Glowing Blue when the Scroll Lock function is activated. Hard Disk In-use: Blinking Blue when Notebook is accessing the hard disk drive. AC Power On: Glowing Blue when the AC Power is activated and blinking Blue when Notebook is getting into sleep mode. Battery Status: Blinking Green when the battery is being charged and blinking red when the battery is in LLB status (Low Low Battery status). Wireless LAN & Bluetooth: Glowing blue when wireless LAN function of the Notebook is enabled. Glowing green when bluetooth function of the Notebook is enabled. When wireless LAN & Bluetooth functions are enabled in the same time, green light & blue light blink in turn.
2-10 Getting Started Right-side View 1. USB Port The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the mouse, keyboard, modem, portable hard disk module, printer and more. 2. RJ-11 Connector The Notebook provides a built-in modem that allows you to connect an RJ-11 telephone line through this connector. With the 56K V.90 modem, you can make a dial-up connection. 3. RJ-45 Connector The 10/100/1000 Ethernet connector is used to connect a LAN cable for network connection. 4. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 2 1 3 4 5 6
2-11 Getting Started 5. VGA Port The 15-pin-D-sub VGA port allows you to connect an external monitor or other standard VGA-compatible device (such as a projector) for a great view of the Notebook display. 6. Power Connector To connect the AC adapter and supply power for the Notebook.
2-12 Getting Started Left-side View 1. Optical Storage Device A slim DVD Combo, DVD Dual drive and Super Multi Drive is available in the Notebook, depending on the model you purchased. The optical device allows you to use the CD/DVD disc for installing software, accessing data and playing music/movie on the Notebook. 2. USB Port The USB 2.0 port allows you to connect USB-interface peripheral devices, such as the mouse, keyboard, modem, portable hard disk module, printer and more. 3. Express Card Slot The computer provides an Express Card slot. The new Express Card interface is smaller and faster than PC Card interface. The Express Card technology takes advantage of the scalable, high-bandwidth serial PCI Express and USB 2.0 interfaces. 2 1 3 4
2-13 Getting Started 4. 3 in 1 Card Reader The built-in card reader supports MMC (multi-media card), SD (secure digital) and MS (memory stick) cards
2-14 Getting Started Rear View 1. Kensington Lock Hole This is used to lock the Notebook to location for security 2. Battery Pack (Rear View) To supply power to your Notebook when the AC adapter is not connected 2 1
2-15 Getting Started Bottom View 1. Battery Lock/Unlock Button Battery cannot be moved when the button is positioned on lock status. Once the button is pushed to unlock position, the battery is removable. 2. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 2 1 3 4 5 2
2-16 Getting Started 3. Battery Release Button It is a bounce-back device as a preparation for releasing the battery pack. Press it with one hand and pull the battery pack carefully with the other. 4. Battery Pack Supply power to your Notebook when the AC adapter is not connected. 5. Screw Box for releasing Optical Device Use screwdriver to remove Optical Device from the Notebook.
2-17 Getting Started Power Management AC Adapter Please be noted that it is strongly recommended to connect the AC adapter and use the AC power while using this Notebook for the first time. When the AC adapter is connected, the battery is being charged immediately. NOTE that the AC adapter included in the package is approved for your Notebook; using other adapter model may damage the Notebook or other devices on the Notebook. Connecting the AC Power 1. Unpack the package to find the AC adapter and power cord. 2. Attach the power cord to the connector of the AC adapter. 3. Plug the DC end of the adapter to the Notebook, and the male end of the power cord to the electrical outlet. 2 3 3
2-18 Getting Started Disconnecting the AC Power When you disconnect the AC adapter, you should: 1. Unplug the power cord from the electrical outlet first. 2. Unplug the connector from the Notebook. 3. Disconnect the power cord and the connector of AC adapter. 4. When unplugging the power cord, always hold the connector part of the cord. Never pull the cord directly!
2-19 Getting Started Battery Pack This Notebook is equipped with a high-capacity 4-cell/8-cell Li-ion Battery pack. The rechargeable Li-ion battery pack is an internal power source of the Notebook. Releasing the Battery Pack It’s a better way to have extra battery for enough power supply, so you don’t have to worry about the lack of battery power. It’s recommended to buy a battery pack from your local dealer. To remove the battery pack: 1. Make sure the Notebook is turned off. 2. Check the Lock/Unlock button is in unlocked status. 3. Locate the Battery Release Button on the bottom side. 4. Push the Release Button to the direction of arrow showing below the button. 5. Slide the left side of the battery pack first out of the compartment and then pull the right side of the battery pack.
2-20 Getting Started Replacing the Battery Pack 1. Insert the right side of battery pack into the compartment. 2. Slightly slide and press the battery pack into the right place. 3. After the right side of the battery pack fitting the right track, then slightly press the left side of battery pack into the battery chamber. 4. Make sure the Lock/Unlock Button is in lock position. 2 3 5 4 5
2-21 Getting Started 1. Do not try to disassemble THE BATTERY PACK. 2. Please follow your local laws and regulations to recycle the unused battery pack. 1 4
2-22 Getting Started Using the Battery Pack Battery Safety Tips Replacing or handling the battery incorrectly may present a risk of fire or explosion, which could cause serious injury. w Only replace the main battery pack with the same or equivalent type of battery. w Do not disassemble, short-circuit or incinerate batteries or expose them to temperatures above +60° C (+140° F). w Do not temper with batteries. Keep them away from children. w Do not use rusty or damaged batteries. w Dispose of batteries according to local regulations. Check with your local solid waste officials for details about recycling options or for proper disposal in your area. Conserving Battery Power Efficient battery power is critical to maintain a normal operation. If the battery power is not managed well, the saved data and customized settings may be lost. Follow these tips to help optimizing battery life and avoid a sudden power loss. w Suspend system operation if the system will be idle for a while or shorten the Suspend Timer’s time period. w Turn off the system if you won’t be using it for a period of time. w Disable unneeded settings or remove idle peripherals to conserve power. w Connect an AC adapter to the system whenever possible.
2-23 Getting Started Charging the Battery Pack The battery pack can be recharged while it is installed in the Notebook. Please pay attention to the following tips before recharging the battery: w If a charged battery pack is not available, save your work and close all running programs and shut down the system or Save-to-Disk. w Plug in an external AC/DC power source. w You can use the system, suspend system operation or shut down and turn off the system without interrupting the charging process. w The battery pack uses Lithium-ion battery cells that have no “memory effect.” You do not need to discharge the battery pack before you begin charging. However, to optimize the life of battery, we suggest that consuming the battery power completely once a month is necessary. w If you do not use the Notebook for a long time, it is suggested to remove the battery pack from your Notebook. This may be helpful to extend your battery life. w The actual charging time will be determined by the applications in use.
2-24 Getting Started Basic Operations If you are a beginner to the Notebook, please read the following tips to make yourself safe and comfortable during the operations. Safety and Comfort Tips The Notebook is a portable platform that allows you to work anywhere. However, choosing a good workspace is important if you have to work with your Notebook for long periods of time. w Your work area should have enough illumination. w Choose the proper desk and chair and adjust their height to fit your posture when operating. w When sitting on the chair and adjust the chair’s back (if available) to support your back comfortably. w Place you feet flat and naturally on the floor, so that your knees and elbows have the proper position (about 90-degree) when operating. w Put your hands on the desk naturally to support your wrists. w Adjust the angle/position of the LCD panel, so that you can have the optimal view. w Avoid using your Notebook in the space where may cause your discomfort (such as on the bed). w The Notebook is an electrical device; please treat it with great care to avoid personal injury.
2-25 Getting Started Have a Good Work Habit Have a good work habit is important if you have to work with your Notebook for long periods of time; otherwise, it may cause discomfort or injury to you. Please keep the following tips in mind when operating. w Change your posture frequently. w Stretch and exercise you body regularly. w Remember to take breaks after working for a period of time. Adjust the angle and position of LCD panel. Adjust the desk’s height. Keep your hands and feet with optimal comfort. Sit straight and keep a good posture. Adjust the chair’s height.
2-26 Getting Started Knowing the Keyboard The Notebook’s keyboard provides all the functions of a full-sized 86-key keyboard and an additional [Fn] key for specific functions on the Notebook. The keyboard can be divided into four categories: Typewriter keys, Cursor keys, Numeric keys and Function keys.
2-27 Getting Started Typewriter Keys The function of these Typewriter keys is the major function of the keyboard, which is similar to the keys on a typewriter. It also provides several keys for special purposes, such as the [Ctrl], [Alt] and [Esc] key. When the lock keys are pressed, the corresponding LEDs will light up to indicate their status: n Num Lock: Press and hold the [Fn] key and press this key to toggle the Num Lock on and off. When this function is activated, you can use the numeric keys that are embedded in the typewriter keys. n Caps Lock: Press this key to toggle the Caps Lock on and off. When this function is activated, the letters you type are kept in uppercase. n Scroll Lock: Press and hold the [Fn] key and press this key to toggle the Scroll Lock on and off. This function is defined by individual programs, and it is usually used under DOS. Typewriter Keys
2-28 Getting Started Cursor Keys The keyboard provides four cursor (arrow) keys and [Home], [PgUp], [PgDn], [End] keys at the lower right corner, which are used to control the cursor movement. Move the cursor left for one space. Move the cursor right for one space. Move the cursor up for one line. Move the cursor down for one line. Move to the previous page. Move to the next page. Move to the beginning of the line (or document). Move to the end of the line (or document). Cursor Keys
2-29 Getting Started The Backspace key, [Ins] and [Del] keys at upper right corner are use for editing purpose. This key is used to switch the typing mode between “insert” and “overtype” modes. Press this key to delete one character to the right of the cursor and move the following text left for one space. Press this key to delete one character to the left of the cursor and move the following text left for one space. Numeric Keys The keyboard provides a set of numeric keypad, which is embedded in the typewriter keys. When the Num Lock is activated, you can use these numeric keys to enter numbers and calculations. Numeric Keys
2-30 Getting Started Function Keys n Windows Keys You can find the Windows Logo key ( ) and one Application Logo key () on the keyboard, which are used to perform Windows-specific functions, such as opening the Start menu and launching the shortcut menu. For more information of the two keys, please refer to your Windows manual or online help. n [Fn] Key + Switch the display output mode between the LCD, external monitor and Both. + Increase the LCD brightness. + Decrease the LCD brightness. + Decrease the built-in speaker’s volume. + Increase the built-in speaker’s volume. + Disable the Notebook’s audio function. + Force the Notebook into suspend mode (depending on the system configuration).
2-31 Getting Started Knowing the Touchpad The touchpad integrated in your Notebook is a pointing device that is compatible with standard mouse, allowing you to control the Notebook by pointing the location of the cursor on the screen and making selection with its two buttons. 1. Cursor Movement Area This pressure-sensitive area of the touchpad, allows you to place your finger on it and control the cursor on the screen by moving your finger. 2. Right Button Acts as the mouse’s right button. 3. Left Button Acts as the mouse’s left button. 2 1 3
2-32 Getting Started Using the Touchpad Read the following description to learn how to use the touchpad: n Positioning and Moving Place your finger on the touchpad (usually using the forefinger), and the rectangular pad will act as a miniature duplicate of your display. When you move your fingertip across the pad, the cursor on the screen will move simultaneously in the same direction. When your finger reaches the edge of the pad, lift your finger and replace it on a proper location of the touchpad. n Point and Click When you have moved and placed the cursor over an icon, a menu item or a command that you want to execute, simply tap slightly on the touchpad or press the left button to select. This procedure, called as point and click is the basics of operating your Notebook. Unlike the traditional pointing device such as the mouse, the whole touchpad can act as a left button, so that your each tap on the touchpad is equivalent to pressing the left button. Tapping twice more rapidly on the touchpad is to execute a double-click. n Drag and Drop You can move files or objects in your Notebook by using drag-and-drop. To do so, place the cursor on the desired item and slightly tap twice on the touchpad, and then keep your fingertip in contact with the touchpad on the second tap. Now, you can drag the selected item to the desired location by moving your finger on the touchpad, and then lift your finger from the touchpad to drop the item into place. Alternately, you can press and hold the left button when you select an item, and then move your finger to the
2-33 Getting Started desired location; finally, release the left button to finish the drag-and-drop operation. Move the cursor by sliding your fingertip. Put your wrist on the desk comfortably. Using the Touchpad
2-34 Getting Started n Configuring the Touchpad You can customize the pointing device to meet your personal needs. For example, if you are a left-hand user, you may want to swap the functions of the two buttons. In addition, you can change the size, shape, moving speed and other advanced features of the cursor on the screen. To configure the touchpad, you can use the standard Microsoft or IBM PS/2 driver in your Windows operating system. The Mouse Properties in Control Panel allows you to change the configuration. Mouse Properties Window
2-35 Getting Started About Hard Disk Drive Your Notebook is equipped with a 2.5-inch IDE (Integrated Drive Electronics) hard disk drive. The hard disk drive is a storage device with much higher speed and larger capacity than other storage devices, such as the floppy disk drive and optical storage devices. Therefore, it is usually used to install the operating system and software applications. The hard disk drive is a non-removable storage device in your computer. However, you can upgrade it by replacing a lager capacity hard disk drive. 1. To avoid unexpected data loss in your system, please backup your critical files regularly. 2. Do not turn off the Notebook when the Hard Disk In-use LED is on. 3. Do not remove or install the hard disk drive when the Notebook is turned on. The replacement of hard disk drive should be done by an authorized retailer or service representative.
2-36 Getting Started Using the Optical Storage Your Notebook is equipped with an optical storage device, which is known as the DVD Combo, DVD Dual drive and Super Multi Drive. The actual device installed in your Notebook depends on the model you purchased. n DVD Combo Drive: A cost-effective solution that can work both as a DVD-ROM drive and a CD-RW drive. n DVD Dual Drive: A dual format recorder, allows you to record both the –R/RW and +R/RW formats. n Super Multi Drive: A multi format recorder, allows you to record the –R/RW, +R/RW, -RAM, CDR and CD-RW formats. 1. The optical storage devices are classified as a Class 1 Laser products. Use of controls or adjustments or performance of procedures other than those specified here in may result in hazardous radiation exposure. 2. Do not touch the lens inside the drive.
2-37 Getting Started Eject Button Inserting the CD The following instruction describes the general procedure when operating the optical storage device, including the DVD-ROM drive. 1. Confirm that the Notebook is turned on. 2. Press the Eject Button on the drive’s panel and the CD tray will slide out partially. Then, gently pull the tray out until fully extended. 3. Place your CD in the tray with its label facing up. Slightly press the center of the CD to secure it into place. 4. Push the tray back into the drive.
2-38 Getting Started Removing the CD 1. Press the Eject Button on the drive’s panel and the CD tray will slide out partially. Then, gently pull the tray out until fully extended. 2. Hold the CD by its edge with your fingers and lift it up from the tray. 3. Push the tray back into the drive. 1. Confirm that the CD is placed correctly and securely in the tray before closing the tray. 2. Do not leave the CD tray open.
General Introductions Chapter 1 Getting Started Chapter 2 Customizing this Notebook Chapter 3 BIOS setup Chapter 4 Preface
3-2 Customizing this Notebook Connecting the External Devices The I/O (input/output) ports on the Notebook allow you to connect peripheral devices. Mouse/ Keyboard Printer IEEE 1394 Device Monitor Television Microphone Speakers/ Earphones Modem LAN Webcam
3-3 Customizing this Notebook Connecting the Peripheral Devices Connecting the Mouse You can connect a mouse to your Notebook through the PS/2 port or USB port. If there is no PS/2 port available on your Notebook, but you only have mouse of PS2 connector, please purchase a PS/2-USB connector first. To connect the mouse: 1. Turn on the Notebook and install the mouse driver. 2. Connect your mouse to the Notebook. 3. The Notebook may auto detect your mouse driver and enable the mouse function. If there is no detection of you mouse you can manually enable the mouse by going to Start Menu à Control Panel à Add Hardware to add the new device. Connecting the Keyboard You can connect a keyboard to your Notebook through the PS/2 port or USB port. If there is no PS/2 port available on your Notebook, but you only have mouse of PS2 connector, please purchase a PS/2-USB connector first. To connect the keyboard: 1. Turn on the Notebook and install the keyboard driver. 2. Connect your keyboard to the Notebook. 3. The Notebook may auto detect your keyboard driver and enable the keyboard function. If there is no detection of you keyboard you can manually enable the keyboard by going to Start Menu à Control Panel à Add Hardware to add the new device.
3-4 Customizing this Notebook Connecting the WebCam You can connect a WebCam to your Notebook through the USB port. To connect the WebCam: 1. Turn on the Notebook and install the WebCam driver. 2. Connect your WebCam to the Notebook. 3. The Notebook may auto detect your WebCam driver and enable the WebCam function. If there is no detection of you WebCam you can manually enable the WebCam by going to Start Menu à Control Panel à Add Hardware to add the new device. Connecting the Printer If your printer has a USB interface, you can then use the USB port on the Notebook to connect the printer. The following instruction describes the general procedure to connect a printer: 1. Turn off the Notebook. 2. Connect one end of the printer cable to the Notebook’s USB port and the other end to the printer. 3. Connect the power cord and turn on the printer. 4. Turn on the Notebook and the system will detect a new device. Install the required driver. For further instructions, please refer to your printer’s manual.
3-5 Customizing this Notebook Connecting the External Monitor or TV You can connect an external monitor to your Notebook through the VGA port for a larger view with higher resolution. To connect the monitor: 1. Make sure that the Notebook is turned off. 2. Plug the monitor’s D-type connector into the Notebook’s VGA port. 3. Connect the monitor’s power cord and turn on the monitor. 4. Turn on the Notebook and the monitor should respond by default. If not, you can switch the display mode by pressing [Fn]+[F2]. Alternately, you can change the display mode by configuring the settings in Display Properties of Windows operating system. Connecting the IEEE 1394 devices The IEEE 1394 port of your Notebook is a next-generation serial bus that features a high-speed transfer rate and the connection of up to 63 devices, allowing you to connect many high-end peripheral devices and consumer electronic appliances, such as the DV (digital video camera). The IEEE 1394 standard interface supports “plug-and-play” technology, so that you can connect and remove the IEEE 1394 devices without turning off the Notebook. To connect the IEEE 1394 device, simply connect the cable of the device to the IEEE 1394 port of your Notebook.
3-6 Customizing this Notebook Connecting the Communication Devices Using the LAN The RJ-45 connector of the Notebook allows you to connect the LAN (local area network) devices, such as a hub, switch and gateway, to build a network connection. This built-in 10/100/1000 Base-T LAN module supports data transfer rate up to 1000Mbps. For more instructions or detailed steps on connecting to the LAN, please ask your MIS staff or network manager for help. Using the Modem The built-in 56Kbps fax/data modem allows you to use a telephone line to communicate with others or to dial-up to connect the Internet. For more instructions or detailed steps on dialing-up through the modem, please consult your MIS staff or Internet service provider (ISP) for help. 1. To reduce the risk of fire, use only No. 26 AWG or larger telecommunication lone cord. 2. You are strongly recommended to install the modem driver included in the software CD of your Notebook to take full advantage of the modem feature.
3-7 Customizing this Notebook Express PC Card Installation This computer provides an Express Card slot. The new Express Card interface is smaller and faster than PC Card interface. The Express Card technology takes advantage of the scalable, high-bandwidth serial PCI Express and USB 2.0 interfaces. The following instruction provides you with a basic installation for the Express Card, including how to install and remove it. For more information, please refer to the manual of your Express Card. Installing the Express Card 1. Locate the Express Card slot on your notebook. If there is the dummy card in the slot, remove it first. 2. Insert the Express Card into the slot (usually with its label facing up) and push it until it is firmly seated. Removing the Express Card 1. Press the edge of the Express card to make the card stretch out a bit. 2. Pull the Express card out of the slot. 3. Reattach the dummy card back to the slot.
3-8 Customizing this Notebook Safely Remove Hardware If you connect any peripheral device to your system, the Safely Remove Hardware icon ( ) will appear on the taskbar. Double-click the icon to bring up the Safely Remove Hardware dialog box. You can see all connected peripheral devices here. If you want to remove any of the devices, move the cursor to the device and click Stop. Select
General Introductions Chapter 1 Getting Started Chapter 2 Customizing this Notebook Chapter 3 BIOS setup Chapter 4 Preface
4-2 BIOS Setup About BIOS Setup When to Use BIOS Setup? You may need to run the BIOS Setup when: w An error message appears on the screen during the system booting up and requests you to run SETUP. w You want to change the default settings for customized features. w You want to reload the default BIOS settings. How to Run BIOS Setup? To run the BIOS Setup Utility, turn on the Notebook and press the [Del] key during the POST procedure. If the message disappears before you respond and you still wish to enter Setup, restart the system by turning it OFF and ON, or simultaneously pressing [Ctrl]+[Alt]+[Delete] keys to restart. The screen snaps and setting options in this chapter are for your references only. The actual setting screens and options on your Notebook may be different because of BIOS update.
4-3 BIOS Setup Control Keys You can use only the keyboard to control the cursor in the BIOS Setup Utility. Press left arrow to select one menu title. Press right arrow to select one menu title. Press up arrow to select one item under the menu title. Press down arrow to select one item under the menu title. + Increase the setting value or make changes. Decrease the setting value or make changes. 1) Open the selected item to change setting options. 2) Bring up a sub-menu when available. In some items, press this key to change setting field. Bring up help screen providing the information of control keys. 1) Exit the BIOS Setup Utility. 2) Return to the previous screen in a sub-menu.
4-4 BIOS Setup BIOS Setup Menu Once you enter the BIOS Setup Utility, the Main menu will appear on the screen. The Main menu displays the system information, including the basic configuration. Main menu Show System Overview information about BIOS version, CPU features, Memory size and setting of System Time and Date. Advanced menu Configure IDE and USB settings. Boot menu Set up Boot Type and Boot Sequence. Security menu Install or clear Supervisor’s and User’s Password settings. Exit menu Choose decided status before leaving the BIOS menu.
4-5 BIOS Setup Main menu System Overview System Overview will show you BIOS version and other information about its build date and update notes. Following is CPU’s information about its Type and Speed. The variable settings in Main menu are System Date and System Time, Primary IDE Master/Slave. System Memory This item indicates the information of System Memory. System Time This item allows you to set the system time. The system clock will go on no matter you shut down the PC or get into sleep mode. The set format is [hour:minute:second].
4-6 BIOS Setup System Date This item allows you to set the system date. The date format is [day:month:date:year]. Day Day of the week, from Sun to Sat, which is determined by BIOS (read-only). Month The month from 01 (January) to 12 (December). Date The date from 01 to 31. Year The year can be adjusted by users. Primary IDE Master/Slave The two items display the types of the primary IDE master/slave devices installed in the Notebook. Press [Enter] to bring up a window showing the detailed information of the device, including the device name, vendor, LBA mode, PIO mode and more. System Information This item indicates the information of firmware, processor, and system memory.
4-7 BIOS Setup Advanced menu Advanced Settings PCI Latency Timer Value in units of PCI clocks for PCI device latency timer register. Legacy USB Support If you want to use USB device, such as mouse, keyboard, portable disk, in DOS system or boot your system by USB device, you should enable this function by selecting Enabled. Chipset Configuration This item allows you to enable automatically or disable HD audio Azalia device.
4-8 BIOS Setup Security menu Security Settings Change Supervisor Password When you select the function, a message box will appear on the screen as below: Type the password you want, up to six characters in length and press [Enter]. The password typed now will replace any previously set password from CMOS memory. You may also press [ESC] to abort the selection and not enter a password. Enter New Password
4-9 BIOS Setup When the Supervisor Password is set, the new item User Access Level and Password Check will be added in the menu. You can make further settings of access right in the User Access Level item. Setting options: No Access, View Only, Limited and Full Access. The Password Check item is used to specify the type of BIOS password protection that is implemented. Settings are described below: Setup The password prompt appears only when end users try to run Setup. Always A password prompt appears every time when the Notebook is powered on or when end users try to run Setup. To clear a set password, just press [Enter] when you are prompted to enter the password. A message box will show up confirming the password will be disabled. Once the password is disabled, the system will boot and you can enter Setup without entering any password. About Supervisor Password and User Password Supervisor Password allows the user to enter and change the settings of the setup menu; User Password only allows the user to enter the setup menu, but do not have the right to make changes.
4-10 BIOS Setup Boot menu Boot Settings Configuration Configure settings during system boot. Boot Device Priority --1st, 2nd, and 3rd Boot Device The three items allow you to set the sequence of boot devices where BIOS attempts to load the disk operating system.
4-11 BIOS Setup Exit menu Exit & Save Changes Save the changes you have made and exit the utility. Exit & Discard Changes Exit the utility without saving the changes you have made. Discard Changes Abandon your changes and reload the previous configuration before running the utility. Load Setup Defaults Select this item to load the setup defaults for optimal system performance.
4-12 BIOS Setup

Navigation menu