Micro Star MS6874 VFD COMBO User Manual Microsoft PowerPoint MS 6874 eng 1

Micro Star International Co Ltd VFD COMBO Microsoft PowerPoint MS 6874 eng 1

Contents

USERS MANUAL 1

Page 1
Confidential
MS-6874 User Manual
Page 2
Confidential
Equipment
•Access Point (AP) ＊1
•PC*1 With Win XP OS / Vista
•Bluetooth device(cellphone)＊1
•The software you have to install in PC as below
– Ralink Wireless LAN driver
– IVT Bluesoleil / Toshiba Bluetooth software
–VFD driver
Page 3
Confidential
• PC connect to MS-6874
• Setup Access Point on the area which
MS-6874 RF reachable, and turn on
the DHCP function without
encryption.
• Turn the Bluetooth device function on,
and execute the Bluetooth software.
• Pair the 2 Bluetooth devices.
Page 4
Confidential
MS-6874 cable
Height: 143.8 mm
Width: 36.6 mm
Depth: 12mm
Weight (include cables and inverter): 102.5 g
Page 5
Confidential
VFD Panel button def.
Page 6
Confidential
For WLAN Connection
Click the button in the tray
1.Seach the AP in Site
Survey page.
2.Click the AP you
want to connect to,
and click Connect
button.
3.It will appear shack
hand icon after you
connect success.
Page 7
Confidential
For Bluetooth connection
Click the button in the tray
Click the centre ball on
the windows. It will
search all Bluetooth
devices in the
reachable area.
Double click the device
you want to connect to.
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must not be
co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu