MicroPower Technologies 370-00012-01 Wireless RF Module User Manual
MicroPower Technologies, Inc. Wireless RF Module Users Manual
Users Manual
Mono Camera Module Installation Guide This document outlines requirements and guidelines for installing the Mono Camera Module P/N 370-00012-01 into MicroPower equipment. The Mono Camera Module is not approved for individual sale, and must always be installed and operated according to the following requirements. Labeling. The equipment into which the Mono Camera Module is installed must contain an external label. The label shall contain the following information: Contains FCC ID: ZHX-370-00012-01 This device complies with Part 15 of the FCC rules subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept all interference received, including interference that may cause undesired operation. Antennas: The equipment into which the Mono Camera Module is installed must satisfy the following antenna requirements: 1) Only antennas listed in the current FCC filing may be used with the equipment. 2) The antennas must be attached to the equipment with unique connectors, or the equipment must be professionally installed by trained personnel such that compliance with the FCC filing is maintained. Shielding: The enclosure for the Mono Camera Module shall not be modified or removed. 4225 Executive Square, Suite 430 La Jolla, CA 92037 www.micropowerapp.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 1 Producer : GPL Ghostscript 8.15 Create Date : 2011:03:15 21:09:58 Modify Date : 2011:03:15 21:09:58 Title : Microsoft Word - Mono Camera Module Installation Guide.doc Creator : PScript5.dll Version 5.2.2 Author : msapperEXIF Metadata provided by EXIF.tools