Microchip Technology ATWINC1500 Wireless Module User Manual ATWINC1500 10 29 14 1

Download:
Mirror Download [FCC.gov]
Document ID	2448093
Application ID	ddlXHKmqhDWGEUhQE5J5Fg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.89kB (23644 bits)
Date Submitted	2014-11-18 00:00:00
Date Available	2014-11-18 00:00:00
Creation Date	2014-10-29 15:14:25
Producing Software	GPL Ghostscript 9.10
Document Lastmod	2014-11-14 17:56:56
Document Title	ATWINC1500 User Manual 10_29_14_1
Document Creator	PDFCreator Version 1.7.3
Document Author:	iradutnuy

ATWINC1500 DESIGN-IN GUIDLINES
Atmel ATWINC1500 module provides Wi-Fi capabilities to a Host Processor.
The following connections are required for the proper operation:
3.3V power supply,
VDDIO,
CHIP_EN, RESET control signals,
SPI or SDIO interface.
It is recommended to install 75 Ohm series resistors on interface traces to filter our interference from the
Host Processor in “Receive” mode.
Module can be installed on a product’s carrier board; in this case carrier board must have 20 x 7 (mm)
clearance area (no traces or copper on any layer) under module’s printed antenna. Clearance area 20
mm dimension must be along the carrier board edge.
Each module has label with FCC ID, however product User Manual must contain the following statement:
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation”.
Module must be installed into the end product to provide a separation distance of at least 6.5 cm from all
persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
If module’s label is not visible when installed, then an additional permanent label referring to the enclosed
module: “Contains Transmitter Module FCC ID: VW4ATWINC1500” must be used.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the module/product.
- Increase the separation between the equipment and module/product.
- Consult the dealer or an experienced radio/TV technician for help.
Changes and modifications made to the equipment without the approval of manufacturer could void the
user's authority to operate this equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Author                          : iradutnuy
Create Date                     : 2014:10:29 15:14:25-07:00
Modify Date                     : 2014:11:14 17:56:56-08:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : GPL Ghostscript 9.10
Keywords                        : 
Creator Tool                    : PDFCreator Version 1.7.3
Metadata Date                   : 2014:11:14 17:56:56-08:00
Document ID                     : uuid:747a32a0-6214-11e4-0000-8b1f04b00e46
Instance ID                     : uuid:2df0ff9c-0612-4feb-b082-b2427041f15f
Format                          : application/pdf
Title                           : ATWINC1500 User Manual 10_29_14_1
Creator                         : iradutnuy
Description                     : 
Description (x-repair)          : 
Page Count                      : 1

EXIF Metadata provided by EXIF.tools