Microchip Technology RKE4331 Wireless Remote Control Kit Key Fob User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1958662
Application ID	bx4u9hqb3zD7lDsHd48QEQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.61kB (95159 bits)
Date Submitted	2013-05-06 00:00:00
Date Available	2013-05-07 00:00:00
Creation Date	2013-04-29 20:31:23
Producing Software	Acrobat Distiller 9.5.3 (Windows)
Document Lastmod	2013-05-01 08:59:13
Document Title	Microsoft Word - Wireless Security Remote Control Development Kit Information Sheet.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	C11131

Wireless Security Remote Control Development Kit Information Sheet
Overview
The Wireless Security Remote Control Development Kit is a demonstration and development platform for wireless
security remote control applications. The kit demos two security protocols, KeeLoq® Classic and KeeLoq® AES.
The kit contains a four button key fob transmitter based on the PIC12LF1840T39A, receiver PICtail™
daughterboard, and Embedded Security Development Board. The kits can be purchased in one of three transmit
frequencies: 433.92, 868, and 915 MHz.
Contents
The Wireless Security Remote Control Development Kits have three frequency choices:



Wireless Security Remote Control Development Kit – 433.92 MHz (DM182017‐1)
Wireless Security Remote Control Development Kit – 868 MHz (DM182017‐2)
Wireless Security Remote Control Development Kit – 915 MHz (DM182017‐3)
Each Kit contains:




PIC12LF1840T39A Wireless Remote Key Fob
SX1239 Receiver PICtail
Embedded Security Development Board
USB Cable
User's Guide
The Wireless Security Remote Control Development Kit User's Guide is available for download from the Microchip
web site: http://www.microchip.com/security.
Getting Started
For more information on using the Wireless Security Remote Control Development Kit, refer to the section
“Getting Started” in the “Wireless Security Remote Control Development Kit User's Guide”.
Software
The Wireless Security Remote Control Development Kit is preprogrammed with two security protocols, KeeLoq
Classic and KeeLoq AES. Wireless Security Remote Control Development Kit software and firmware updates can be
downloaded from the Microchip web site: http://www.microchip.com/security.
Regulatory Information
United States
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Canada
This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : C11131
Create Date                     : 2013:04:29 20:31:23-07:00
Modify Date                     : 2013:05:01 08:59:13-04:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : Microsoft Word - Wireless Security Remote Control Development Kit Information Sheet.docx
Creator                         : C11131
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:05:01 08:59:13-04:00
Producer                        : Acrobat Distiller 9.5.3 (Windows)
Document ID                     : uuid:7a58abee-eec1-4fc2-a5a9-47ebc779de99
Instance ID                     : uuid:abcfdf61-68dc-41e6-bb40-a8300b52c46e
Page Count                      : 2

EXIF Metadata provided by EXIF.tools