Microelectronics Technology RU-865 RFID Mini PCI-E Card Module User Manual DFQW5A84ZAT FZ G1mk3 8 1Update OI M indb

Microelectronics Technology Inc RFID Mini PCI-E Card Module DFQW5A84ZAT FZ G1mk3 8 1Update OI M indb

Manual_for_FZ-G1mk3

ContentsOPERATING INSTRUCTIONSRead Me FirstTablet ComputerModel No. FZ-G1 seriesGetting StartedFirst-time Operation .....................................17Read Me FirstSafety Precautions .........................................2Regulatory Information ...................................8A2A1Please read these instructions carefully before using this product, and save this manual for future use.Getting Started Read Me FirstIn these instructions, the names and terms are referred as follows.: Conditions that may result in minor or moderate injury.: Useful and helpful information. “Windows® 8.1 Update Pro 64-bit” as “Windows” or “Windows 8.1” “Windows® 7 Professional 32-bit Service Pack 1” and “Windows® 7 Professional 64-bit Ser-vice Pack 1” as “Windows” or “Windows 7”  indicates Windows® 8.1 Operating System.  indicates Windows® 7 Operating System.Refer to the OPERATING INSTRUCTIONS - Basic Guide by downloading from the following URL.URL Øhttp://pc-dl.panasonic.co.jp/itn/manual/menu_en.htmln Terms and illustrations in these instructionsCAUTIONNOTE
2Read Me FirstSafety PrecautionsTo reduce the risk of injury, loss of life, elec-tric shock, re, malfunction, and damage to equipment or property, always observe the following safety precautions.Explanation of symbol word panelsThe following symbol word panels are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed. DANGERDenotes a potential hazard that will result in serious injury or death. WARNINGDenotes a potential hazard that could result in serious injury or death. CAUTIONDenotes a hazard that could result in minor injury.NOTICEDenotes a hazard that could result in prop-erty damage.The following symbols are used to classify and describe the type of instructions to be observed.This symbol is used to alert users to a specic operating procedure that must not be performed.This symbol is used to alert users to a specic operating procedure that must be followed in order to operate the unit safety. DANGERPrecautions on the Battery PackElectrolyte leakage, generation of heat, ignition or rupture of the Battery Pack may result. nDo Not Throw the Battery Pack into a Fire or Expose It to Exces-sive Heat nDo Not Deform, Disassemble, or Modify the Battery Pack nDo Not Short the Positive (+) and Negative (-) Contacts ÖDo not place the battery pack together with articles such as necklaces or hairpins when carry-ing or storing. nDo Not Apply Shocks to the Product by Dropping It, Applying Strong Pressure to It, etc. ÖIf this product is subjected to a strong impact, damaged or deformed, stop using it immedi-ately. nDo Not Charge the Battery Using Methods Other Than Those Spec-ied nDo Not Use the Battery Pack with Any Other Product•  The battery pack is rechargeable and was intended for the specied product. nDo Not Use This Product with a Battery Pack Other Than the One Specied ÖUse only the specied battery pack with your product. nWhen the Battery Pack Has De-teriorated, Replace It With a New One ÖDo not continue to use a dam-aged battery pack. nAvoid Extreme Heat (Near the Fire, in Direct Sunlight, for Ex-ample)
3Read Me First DANGERPrecautions on the Built-in Bridge Battery (for disposal)<Only for model with Built-in Bridge Bat-tery>When disposing the battery, generation of heat, ignition or rupture of the Built-in Bridge Battery may result.Handling This Computer nDo Not Disassemble the Com-puter Except When DisposingHandling the Built-in Bridge Battery nDo Not Short the Positive (+) and Negative (-) Contacts nDo Not Throw the Battery into a Fire or Expose It to Excessive Heat nDo Not Apply Shocks to the Built-in Bridge Battery by Dropping It, Applying Strong Pressure to It, etc. nDo Not Charge nDo Not Use nDo Not Deform, Disassemble, or Modify the Built-in Bridge Battery   nAvoid Extreme Heat (Near the Fire, in Direct Sunlight, for Ex-ample) WARNING<Only for model with Built-in Bridge Bat-tery>Generation of heat, ignition or rupture of the Built-in Bridge Battery may result. nDo Not Throw This Product Into a Fire or Expose It to Excessive Heat nDo Not Deform, Disassemble, or Modify This Product nDo Not Apply Shocks to the Product by Dropping It, Applying Strong Pressure to It, etc. nDo Not Charge the Battery Using Methods Other Than Those Spec-ied nAvoid Extreme Heat (Near the Fire, In Direct Sunlight, for Ex-ample) nWhen the Battery Has Deteriorat-ed, Contact Your Technical Sup-port Ofce to Replace the Battery
4Read Me FirstSafety Precautions WARNINGFire or electric shock may result. nDo Not Do Anything That May Damage the AC Cord, the AC Plug, or the AC Adaptor Do not damage or modify the cord, place it near hot tools, bend, twist, or pull it forcefully, place heavy objects on it, or bundle it tightly. ÖDo not continue to use a dam-aged AC cord, AC plug and AC adaptor.•  Contact your technical support ofce for repair. nDo Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet ÖConnecting to a DC/AC converter (inverter) may damage the AC adaptor. On an airplane, only connect the AC adaptor/charger to an AC outlet specically ap-proved for such use. nDo Not Pull or Insert the AC Plug If Your Hands Are Wet nDo Not Disassemble This Prod-uct nDo Not Touch This Product In a Thunderstorm If Connected with the AC Cable or Any Other Cables nIf a Malfunction or Trouble Oc-curs, Immediately Stop Use If the Following Malfunction Oc-curs, Immediately Unplug the AC Plug and the Battery Pack•  This product is damaged•  Foreign object inside this prod-uct•  Smoke emitted•  Unusual smell emitted•  Unusually hot ÖAfter the above procedure, con-tact your technical support ofce for repair. nClean Dust and Other Debris of the AC Plug Regularly•  If dust or other debris accumu-lates on the plug, humidity, etc. may cause a defect in the insula-tion. nInsert the AC Plug Completely ÖDo not use a damaged plug or loose AC outlet. nClose the Connector Cover Tightly When Using This Product Where is a Lot of Water, Mois-ture, Steam, Dust, Oily Vapors, etc. ÖIf foreign matter has found its way inside, immediately turn the power off and unplug the AC cord, and then remove the battery pack. Then contact your technical support ofce.
5Read Me First WARNINGBurns or low-temperature burns may result. nDo Not Use This Product in Close Contact With Your Body For a Long Period of Time ÖDo not use this product with its heat-emitting parts in close contact with your body for long periods of time.•  Low-temperature burns may re-sult. nDo Not Expose Yourself or Other Persons to the Hot Wind from the Ventilation Hole (Exhaust) For a Long Period of Time•  Depending on the direction of the computer or the way you hold the computer, your hands and body will be more exposed to the hot wind.•  Covering the ventilation hole (exhaust) with your hand or other object can cause heat to build up inside, possibly resulting in burns. nDo Not Touch The Surface of The AC Adaptor Continuously While Using/Charging•  Burns may result.•  Do Not Place the Product in a Bag or Case While It is Turned On•  Doing so may cause the product to overheat and result in burns.Detrimental health effects on your body may result. nDo Not Turn the Volume Up To Loud When Using Headphones•  Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing. CAUTIONFire or electric shock may result. nDo Not Move This Product While the AC Plug Is Connected ÖIf the AC cord is damaged, un-plug the AC plug immediately. nDo Not Subject the AC Adaptor To Any Strong Impact ÖDo not continue to use the AC adaptor after a strong impact such as being dropped. ÖContact your technical support ofce for repair.<Only for model with LAN> nDo Not Connect a Telephone Line, or a Network Cable Other Than the One Specified, Into the LAN Port ÖDo not connect to a network such as the ones listed below.•  Networks other than 1000BASE-T, 100BASE-TX or 10BASE-T•  Phone lines (IP phone (Internet Protocol Telephone), Telephone lines, internal phone lines (on-premise switches), digital public phones, etc.) nDo Not Leave This Product in High Temperature Environment for a Long Period of Time•  Leaving this product where it will be exposed to extremely high temperatures such as near re or in direct sunlight may deform the cabinet and/or cause trouble in the internal parts. nDo Not Block the Ventilation Hole (Exhaust/Intake) ÖDo not use this product wrapped in cloth or on top of bedding or a blanket.
6Read Me FirstSafety Precautions CAUTIONFire or electric shock may result. nHold the Plug When Unplugging the AC Plug nUse Only the Specified AC Adap-tor With This Product ÖDo not use an AC adaptor other than the one supplied (supplied with the unit or one sold sepa-rately as an accessory).This product may fall over or drop, result-ing in an injury. nDo Not Place This Product on Unstable Surfaces nAvoid StackingDetrimental health effects on your body may result. nTake a Break Of 10-15 Minutes Every Hour•  Using this product for long peri-ods of time may have detrimen-tal health effects on the eyes or hands.Burns, low-temperature burns, or frost-bite may result. nDo Not Expose the Skin To This Product When Using the Product In A Hot Or Cold Environment ÖWhen it is necessary to expose the skin to this product such as to scan a ngerprint, perform the operation in the shortest time possible.NOTICEl  Do not place the computer near a televi-sion or radio receiver.l  Keep the computer away from magnets. Data stored on the ash memory may be lost.l  This computer is not intended for the dis-play of images for use in medical diagno-sis.l  This computer is not intended for a use with connection of medical equipment for the purpose of medical diagnosis.l  Panasonic shall not be liable for loss of data or other incidental or consequential damages resulting from the use of this product.l  Do not touch the terminals on the battery pack. The battery pack may no longer function properly if the contacts are dirty or damaged.l  Do not expose the battery pack to water, or allow it to become wet.l  If the battery pack will not be used for a long period of time (a month or more), charge or discharge (use) the battery pack until the remaining battery level becomes 30% to 40% and store it in a cool, dry place.l  This computer prevents overcharging of the battery by recharging only when the remaining power is less than approx. 95% of capacity.l  The battery pack is not charged when the computer is rst purchased. Be sure to charge it before using it for the rst time. When the AC adaptor is connected to the computer, charging begins automatically.l  Should the battery leak and the uid get into your eyes, do not rub your eyes. Im-mediately ush your eyes with clear water and see a doctor for medical treatment as soon as possible.
7Read Me First NOTE l The battery pack may become warm dur-ing recharging or normal use. This is com-pletely normal.l Recharging will not commence if internal temperature of the battery pack is outside of the allowable temperature range (0 °C to 50 °C {32 °F to 122 °F}). (  Reference Manual “Battery Power”) Once the allow-able range requirement is satised, charg-ing begins automatically. Note that the recharging time varies based on the usage conditions. (Recharging takes longer than usual when the temperature is 10 °C {50 °F} or below.)l If the temperature is low, the operating time is shortened. Only use the computer within the allowable temperature range.l This computer has a high temperature mode function that prevents the degra-dation of the battery in high temperature environments. (   Reference Manual “Battery Power”) A level corresponding to a 100% charge for high temperature mode is approximately equivalent to an 80% charge level for normal temperature mode.l The battery pack is a consumable item. If the amount of time the computer can be run by using a particular battery pack becomes dramatically shorter and re-peated recharging does not restore its performance, the battery pack should be replaced with a new one.l When transporting a spare battery inside a package, briefcase, etc., it is recommend-ed that it be placed in a plastic bag so that its contacts are protected.l Always power off the computer when it is not in use. Leaving the computer on when the AC adaptor is not connected will ex-haust the remaining battery capacity.l <Only for model with Built-in Bridge Battery> To minimize deterioration of the built-in bridge battery, connect the computer to the AC adaptor and recharge it for approxi-mately 2 hours about once every year.THIS PRODUCT IS NOT INTENDED FOR USE AS, OR AS PART OF, NUCLEAR EQUIPMENT/SYSTEMS, AIR TRAFFIC CONTROL EQUIPMENT/SYSTEMS, AIR-CRAFT COCKPIT EQUIPMENT/SYSTEMS*1, MEDICAL DEVICES OR ACCESSORIES*2, LIFE SUPPORT SYSTEMS OR OTHER EQUIPMENTS/DEVICES/SYSTEMS THAT ARE INVOLVED WITH ENSURING HUMAN LIFE OR SAFETY. PANASONIC WILL NOT BE RESPONSIBLE FOR ANY LIABILITY RE-SULTING FROM THE USE OF THIS PROD-UCT ARISING OUT OF THE FOREGOING USES. *1  AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Sys-tems and Class1 EFB Systems when used dur-ing critical phases of ight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are dened by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaets) No.36. *2  As dened by the European Medical Device Directive (MDD) 93/42/EEC.Panasonic cannot guarantee any specica-tions, technologies, reliability, safety (e.g. Flammability/Smoke/Toxicity/Radio Fre-quency Emission, etc.) requirements related to aviation standards that exceed the speci-cations of our COTS (Commercial-Off-The-Shelf) products.
8Read Me FirstInformation to the User / Informations destinées aux utilisateurs<Only for model with wireless LAN/Bluetooth>This product and your HealthThis product, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by this product how-ever is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones.Because this product operates within the guidelines found in radio frequency safety standards and recommendations, we be-lieve this product is safe for use by consum-ers. These standards and recommendations reect the consensus of the scientic com-munity and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.In some situations or environments, the use of this product may be restricted by the propri-etor of the building or responsible represen-tatives of the organization. These situations may for example include:l  Using this product on board of airplanes, orl  In any other environment where the risk of interference to other devices or services is perceived or identied as harmful.If you are uncertain of the policy that applies on the use of wireless devices in a specic or-ganization or environment (e.g. airports), you are encouraged to ask for authorization to use this product prior to turning on the product.Regulatory InformationWe are not responsible for any radio or tele-vision interference caused by unauthorized modication of this product. The correction of interference caused by such unauthorized modication will be the responsibility of the user. We and its authorized resellers or dis-tributors are not liable for damage or violation of government regulations that may arise from failing to comply with these guidelines. 26-M-1<Uniquement pour les modèles avec réseau local sans l et/ou Bluetooth>Ce produit et votre santéCe produit, comme tout autre appareil radio, émet de  l’énergie radioélectrique. Toutefois, la quantité d’énergie émise par ce produit est beaucoup moins importante que l’énergie radioélec-trique émise par des appareils sans l tels que les téléphones portables. L’utilisation de ce produit ne comporte aucun risque pour le consommateur du fait que cet appareil opère dans les limites des directives concernant les normes et les recommendations de sécu-rité sur les fréquences radio. Ces normes et recommandations reètent le consensus de la communauté scientique et résultent de délibérations de jurys et comités de scienti-ques qui examinent et interprètent continuel-lement les nouveautés de la vaste littérature sur les recherches effectuées. Dans certaines situations ou environnements, l’utilisation de ce produit peut être restreinte par le proprié-taire du bâtiment ou par les représentants responsables de l’organisation. Ces situations peuvent être les suivantes par exemple :l  A bord d’un avion, oul  Dans tout autre environnement où les risques d’interférence sur d’autres appa-reils ou services sont perçus ou identi-ables comme dangereux.Si vous n’êtes pas sûr de la réglementation applicable à  l’utilisation d’appareils sans l dans une orga-nization ou un environnement spécique, (par exemple dans un aéroport) nous vous invitons à demander l’autorisation  d’utiliser ce produit avant sa mise en marche.Informations concernant la réglementationNous déclinons toute responsabilité pour toute interférence radio ou télévision causée par des modications non autorisées appor-tées à ce produit. La correction  d’interférences causées par de telles modi-cations non autorisées sera la seule respon-sabilité de son utilisateur. Nousmêmes, les revendeurs ofciels et les distributeurs ne sommes pas responsable de tout dégât ou de toute violation des règlements de l’État pou-vant découler du non-respect de ces direc-tives. 26-F-1Regulatory Information
9Read Me FirstLithium Battery / Pile au lithiumLithium Battery!This computer contains a lithium battery to enable the date, time, and other data to be stored. The battery should only be exchanged by authorized service personnel.Warning!A risk of explosion from incorrect installation or misapplication may possibly occur. 15-E-1Pile au lithium!Le micro-ordinateur renferme une pile au lithium qui permet de sauvegarder certaines données, notamment la date et l’heure. La pile ne doit être remplacée que par un techni-cien qualié.Danger ! Risque d’explosion en cas de non respect de cette mise en garde! 15-F-1Information for Users on Collection and Disposal of Old Equip-ment and used BatteriesThese symbols are only valid in the European Union.If you wish to discard this product, please contact your local authori-ties or dealer and ask for the correct method of disposal. 53-M-1Energy StarAs an ENERGY STAR® Partner, Panasonic Corporation has determined that this product meets ENERGY STAR® guidelines for energy efciency. By enabling available power management settings, Panasonic computers enter a low-power sleep mode after a period of inactivity, saving the user energy.<For U.S.A.>To learn more about power management, please visit the web site:www.energystar.gov/index.cfm?c=power_mgt.pr_power_managementOutline of the International ENERGY STAR® Ofce Equipment ProgramThe international ENERGY STAR® Ofce Equipment Program is an international program that promotes energy saving through the use of computers and other ofce equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted products are ofce equip-ment such as computers, displays, printers, facsimiles, and copiers. Their standards and logos are uniform among participating nations.<For U.S.A.>For information about ENERGY STAR®, refer to the following web site:Web Site: www.energystar.gov22-M-1
10Read Me FirstRegulatory InformationSafety Precautions<Only for model with wireless WAN>The following safety precautions must be observed during all phases of the operation, usage, ser-vice or repair of any Personal Computer or Tablet Computer incorporating wireless WAN modem. Manufacturers of the cellular terminal are advised to convey the following safety information to users and operating personnel and to incorporate these guidelines into all manuals supplied with the product. Failure to comply with these precautions violates safety standards of design, manu-facture and intended use of the product. Panasonic assumes no liability for customer failure to comply with these precautions.  When in a hospital or other health care facility, observe the restrictions on the use of mobiles. Switch Personal Computer or Tablet Computer incorporating wireless WAN modem off, if instructed to do so by the guidelines posted in sensitive areas. Medical equipment may be sensitive to RF energy.   The operation of cardiac pacemakers, other implanted medical equipment and hear-ing aids can be affected by interference from Personal Computer or Tablet Computer incorporating wireless WAN modem placed close to the device. If in doubt about po-tential danger, contact the physician or the manufacturer of the device to verify that the equipment is properly shielded. Pacemaker patients are advised to keep their Personal Computer or Tablet Computer incorporating wireless WAN modem away from the pace-maker, while it is on.  Switch off Personal Computer or Tablet Computer incorporating wireless WAN modem before boarding an aircraft. Make sure it cannot be switched on inadvertently. The operation of wireless appliances in an aircraft is forbidden to prevent interference with communications systems. Failure to observe these instructions may lead to the suspen-sion or denial of cellular services to the offender, legal action, or both. For details on usage of this unit in aircrafts please consult and follow instruction pro-vided by the airline.  Do not operate Personal Computer or Tablet Computer incorporating wireless WAN modem in the presence of ammable gases or fumes. Switch off the cellular terminal when you are near petrol stations, fuel depots, chemical plants or where blasting op-erations are in progress. Operation of any electrical equipment in potentially explosive atmospheres can constitute a safety hazard.  Your Personal Computer or Tablet Computer incorporating wireless WAN modem re-ceives and transmits radio frequency energy while switched on. Remember that interfer-ence can occur if it is used close to TV sets, radios, computers or inadequately shielded equipment. Follow any special regulations and always switch off Personal Computer or Tablet Computer incorporating wireless WAN modem wherever forbidden, or when you suspect that it may cause interference or danger. Road safety comes rst! Do not use a Personal Computer or Tablet Computer incor-porating wireless WAN modem while driving a vehicle. Do not place the computer with wireless WAN modem in an area where it could cause personal injury to the driver or passengers. It is recommended to stow the unit in the boot or secure stowage area while driving.   Do not place the computer with wireless WAN modem in an area over an air bag or in the vicinity where an air bag may deploy.   Air bags inate with great force and if the computer with wireless WAN modem is placed in the air bag deployment area may be propelled with great force and cause serious injury to occupants of the vehicle.
11Read Me First IMPORTANT! Personal Computer or Tablet Computer incorporating wireless WAN modem operate using radio signals and cellular networks cannot be guaranteed to connect in all condi-tions. Therefore, you should never rely solely upon any wireless device for essential communications, for example emergency calls.Remember, in order to make or receive calls, Personal Computer or Tablet Computer incorporating wireless WAN modem must be switched on and in a service area with adequate cellular signal strength.Some networks do not allow for emergency calls if certain network services or phone features are in use (e.g. lock functions, xed dialing etc.). You may need to deactivate those features before you can make an emergency call.Some networks require that a valid SIM card be properly inserted in Personal Computer or Tablet Computer incorporating wireless WAN modem.CAUTION:Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions.58-E-1ATTENTION:Il y a risque d’explosion si la batterie est remplacée par une batterie de type incorrect.Mettre au rebut les batteries usagées conformément aux instructions.58-F-1Camera Light<For model with rear camera>CAUTION- The light from the LED is strong and can injure human eyes. Do not look directly at the LEDs    with naked eyes.57-E-1
12Read Me FirstRegulatory InformationFederal Communications Commission Radio Frequency Interference StatementNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in-terference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com-munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television re-ception, which can be determined by turning the equipment off and on, the user is encour-aged to try to correct the interference by one or more of the following measures:l  Reorient or relocate the receiving antenna.l  Increase the separation between the equipment and receiver.l  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.l  Consult the Panasonic Service Center or an experienced radio/TV technician for help.WarningTo assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equip-ment.FCC RF Exposure Warning:l  This equipment is provided with PC Card slot that could be used with wireless trans-mitters, which will be specically recom-mended when they become available.Other third-party wireless transmitters have not been RF exposure evaluated for use with this computer and may not com-ply with FCC RF exposure requirements.<Only for model with wireless LAN/wireless WAN/Bluetooth>l  This equipment complies with FCC radia-tion exposure limits set forth for an uncon-trolled environment.For U.S.A.Laser Devices Caution / Précautions pour le Dispositifs Laser<Only for model with the following label on the computer>CAUTION!THIS PRODUCT UTILIZES A LASER.USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.REFER SERVICING TO QUALIFIED PERSONNEL.12-E-1<Uniquement pour le modèle avec l’étiquette suivante sur l’ordinateur>AVERTISSEMENT!CET APPAREIL UTILISE UN LASER.L’UTILISATION DE COMMANDES OU DE RÉGLAGES OU L’EXÉCUTION DE PROCÉDURES AUTRES QUE CELLES SPÉCIFIÉES ICI PEUVENT PROVOQUER UNE EXPOSITION À DES RADIATIONS DANGEREUSES.NE PAS OUVRIR LES COUVERCLES NI ESSAYER DE RÉPARER SOI-MÊME.CONFIER TOUT TRAVAIL D’ENTRETIEN À UN PERSONNEL QUALIFIÉ.12-F-1The following label is put on the computer.L’étiquette suivant est mis sur de l’ordinateur.
13Read Me Firstl  This equipment may not be co-located or operated with any other antenna or trans-mitter.l  This device meets the government’s re-quirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for expo-sure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.l  The exposure standard for wireless device employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is  1.6 W/kg.*  Tests for SAR are conducted using stan-dard operating positions accepted by the FCC with the device transmitting at its highest certied power level in all tested frequency bands. Although the SAR is determined at the highest certied power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.<Only for model with wireless LAN>This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz fre-quency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harm-ful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product. 25-M-W-1This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful inter-ference, and(2) This device must accept any interference received, including interference that may cause undesired operation.Responsible Party: Panasonic Corporation of North AmericaTwo Riverfront PlazaNewark, NJ 07102Support Contact: http://www.panasonic.com/contactinfo 6-M-1FCC RF Exposure Warning:l  This equipment is provided with external antenna connector(s) for connection to optional Car Mounter or Port Replicator for mobile external mounted antenna(s). External antenna(s) must be professionally installed and cannot exceed recommended maximum antenna gain as described in individual provided supplement instructions for wireless transmitters. The Car Mounter is provided with Radiall/Larsen WLAN whip antenna, type NMO5E2400BKTNC with 5dBi antenna gain. The maximum allow-able antenna gain for the external WWAN base whip antenna for the cellular band is 4 dBi, PCS band is 3 dBi, LTE Band 4 is 3 dBi, LTE Band 17 is 9 dBi and 10 dBi for LTE Band 13. Also, user must maintain minimum 20 cm spacing between external antenna(s) and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.32-M-1USA Only: Disposal may be regulated in your community due to environmental consider-ations. For disposal or recycling information, please visit Panasonic website:  http://www.panasonic.com/environmental  or call 1-888-769-0149 65-M-2<For USA-California Only>This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply.See www.dtsc.ca.gov/hazardouswaste/per-chlorate/38-M-1A lithium ion battery that is recyclable powers the prod-uct you have purchased.Please call  1-800-8-BATTERY  for information on how to recycle this battery.L’appareil que vous vous êtes procuré est alimen-té par une batterie au lithium-ion.Pour des renseignements sur le recyclage de la batte-rie, veuillez composer le 1-800-8-BATTERY.48-M-1
14Read Me FirstRegulatory InformationFor CanadaCanadian ICES-003CAN ICES-3(B)/NMB-3(B) 7-M-2<Only for model with wireless LAN/Bluetooth>Industry CanadaThis product complies with RSS210 Industry Canada.Operation is subject to the following two con-ditions;(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause un-desired operation of the device.<Ne s’applique qu’aux modèles avec techno-logie Bluetooth/LAN sans l>Industrie CanadaCet équipement est conforme à la norme CNR-210  d’Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes :(1) ce dispositif ne peut produire de brouillage, et(2) ce dispositif doit accepter le brouillage, y compris le brouillage pouvant entraîner le fonctionnement non désiré de l’appareil.30-Ca-1-1<Only for model with wireless LAN>This product (local network devices) for the band 5150-5250 MHz is only indoor usage to reduce potential for harmful interference to co-channel Mobile Satellite systems.High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650-5850 MHz and these radars could cause interference and/or dam-age to LELAN devices.<Ne s’applique qu’aux modèles avec techno-logie LAN sans l>Cet appareil (pour réseaux locaux radioé-lectriques) dans les bandes de fréquences 5150-5250 MHz est réservé à une utilization à l’intérieur an de réduire le risque d’inter-férence avec les systèmes satellites mobiles bicanaux.Les radars forte puissance sont désignés comme étant les premiers utilisateurs (c’est-à-dire qu’ils ont la priorité) des bandes de fré-quences 5250-5350 MHz et 5650-5850 MHz. Ces stations radars peuvent provoquer des interférences et/ou des dommages à ce péri-phérique. 30-Ca-2-1<Only for model with wireless LAN/wireless WAN/Bluetooth>l  This computer complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.l  This PC with WLAN and/or Bluetooth transmitters installed, has been approved for portable operation and does not require any minimum spacing be provided be-tween antennas and all person’s body.<Ne s’applique qu’aux modèles avec techno-logie Bluetooth/LAN sans l/WAN sans l>l  Cet équipement est conforme aux limites d’exposition aux rayonnements d’Industrie Canada établies pour un environnement non contrôlé.l  Ce PC avec émetteurs WLAN et/ou  Bluetooth a été approuvé à des ns d’opé-ration mobile; aucun espace minimum entre les antennes et le corps de l’utilisa-teur n’est requis.For Used in Motor Vehicle /Pour L’utilisation Dans Un Véhi-cule MotoriséWarning: Notebook Computer may be installed in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle information, system control, rear or side observation and navigation. If used for entertain-ment purpose, such as television reception or video play, it must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Check with individual state/provincial laws to determine lawful use of this product while operating within a motor vehicle.Avertissement : L’ordinateur bloc-notes peut être installé dans un véhicule motorisé et dans le champ de vision du conducteur uniquement en tant que dispositif d’aide aux fonctions du véhi-cule, comme par ex-emple pour fournir des informations sur le véhicule, comme dispositif de contrôle de système, pour l’ob-servation à l’arrière ou sur les côtés du véhicule, ainsi que pour fournir de l’information routière. Pour toute utilisation à n dedivertissement, comme par exemple pour regarder la télévision ou jouer à des jeux vidéo, il doit être installé à l’arrière du siège du conducteur, en un emplacement où il ne sera pas visible, ni directe-ment ni indirectement, pour le conducteur du véhicule motorisé. Vériez les lois fédérales et nationales qui régissentl’utilisation légale de cet appareil à l’intérieur d’un véhicule mo-torisé.35-M-1
15Read Me FirstThis device has been designed to operate with the Radiall/Larsen whip antenna, typeNMO5E2400BKTNC WLAN antenna having a maximum gain of 5dB. A WLAN Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The Required antenna impedance is 50 ohms.To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.Cet appareil est conçu pour opérer avec l’antenne-fouet Radiall/Larsen, type WLAN NMO5E2400BKTNC, ayant un gain maximum de 5 dB. Les règlements d’Industrie Canada interdisent l’utilisation d’une antenne WLAN dont le gain serait supérieur à cette limite. L’antenne doit avoir une impédance de 50 ohms.An de réduire le risque d’interférence ra-dioélectrique aux autres utilisateurs des bandes de fréquences, le type d’antenne et son gain doivent être tels que la puissance isotrope rayonnée équivalente (PIRE) n’est pas plus élevée que le niveau requis pour as-surer la communication. 25-Ca-1-1<Only for model with wireless LAN/wireless WAN/Bluetooth>*  This computer complies with Industry   Canada radiation exposure limits set forth   for an uncontrolled environment.*  This PC with WLAN and/or Bluetooth   transmitters installed, has been approved   for portable operation and does not require   any minimum spacing be provided between   antennas and all person’s body.<Ne s’applique qu’aux modèles avec tech-nologie Bluetooth/LAN sans l/WAN sans l>*  Cet équipement est conforme aux limites   d’exposition aux rayonnements d’Industrie   Canada établies pour un environnement non  contrôlé.*  Ce PC avec émetteurs WLAN et/ou   Bluetooth a été approuvé à des ns   d’opération mobile; aucun espace minimum   entre les antennes et le corps de l’utilisateur   n’est requis.This device has been designed to operate with the WWAN antenna having a maxi-mum gain of 4 dBi for Cellular band, 3 dBi for the PCS band and 5.5 dBi for LTE Band 4. WWAN Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The Required antenna impedance is 50 ohms.To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.<Utilisation au Canada>Cet appareil est conçu pour opérer avec une antenne WWAN (réseau étendu sans l) dont le gain maximum est xé à [X1] pour la bande cellulaire 4 dBi, 3 dBi pour la bande PCS et 5.5 dBi pour la bande LTE Band 4. Les règlements d’Industrie Canada interdisent l’utilisation d’une antenne WWAN dont le gain serait supérieur à cette limite. L’antenne doit avoir une impédance de 50 ohms.An de réduire le risque d’interférence ra-dioélectrique aux autres utilisateurs des bandes de fréquences, le type d’antenne et son gain doivent être tels que la puissance isotrope rayonnée équivalente (PIRE) n’est pas plus élevée que le niveau requis pour as-surer la communication. 32-Ca-1-1FOR USE WITH MODEL NO. : CF-AA64B3CPOUR UTILISER AVEC MODÈLE : CF-AA64B3C20-Ca-1
16Read Me FirstRegulatory InformationFor Europe<Only for model with a “CE” mark on the bottom of the computer>Declaration of Conformity (DoC)“Hereby, Panasonic declares that this Personal Computer is in compliance with the es-sential requirements and other relevant provisions of the Directive 1999/5/EC.”Hint:If you want to get a copy of the original DoC of our above mentioned products, please contact our web ad-dress:http://www.ptc.panasonic.euAuthorised Representative:Panasonic Testing CentrePanasonic Marketing Europe GmbHWinsbergring 15, 22525 Hamburg, Germany18-E-0For IndiaDeclaration of Conformity with the requirements of the e-waste (Management and Handling) Rules, 2011. (adopted by Notication S.O.1035(E) of Ministry of Environment and Forests)The Product is in conformity with the requirements of Rule 13 of the e-waste Rules.The content of hazardous substance with the exemption of the applications listed in SCHEDULE II of the  e-waste Rules:1. Lead (Pb) - not over 0.1% by weight;2. Cadmium (Cd) - not over 0.01% by weight;3. Mercury (Hg) - not over 0.1% by weight;4. Hexavalent chromium (Cr6+) - not over 0.1% by weight;5. Polybrominated biphenyls (PBBs) - not over 0.1% by weight;6.   Polybrominated diphenyl ethers (PBDEs) - not over 0.1% by weight.For the purpose of recycling to facilitate effective utilization of resources, please return this product to a nearby authorized collection center, registered dismantler or recycler, or Panasonic service center when disposing of this product.Please see the Panasonic website for further information on collection centers, etc.http://www.panasonic.com/in/corporate/sustainability/panasonic-india-i-recycle-program.html68-M-2
17Getting Startedn PreparationA Check and identify the supplied accessories. If you do not nd the described accessories, contact your support ofce.• AC Adaptor .. 1Model No:  CF-AA6413C• AC Cord .... 1 • Battery Pack  ..... 1Model No:  FZ-VZSU84U or FZ-VZSU88U• Digitizer pen ...... 1è    Reference Manual “Screen Input Operation”• Tether ...... 1 • Soft Cloth ... 1è  Reference Manual “Screen Input Operation”• OPERATING INSTRUCTIONS - Read Me First (This book) .....1We recommend that “OPERATING INSTRUCTIONS - Basic Guide” be downloaded. (è cover) “OPERATING INSTRUCTIONS - Basic Guide” is described the basic operation when using this computer.To download above from this product, you need to setup connecting a network.(è  Connect to a network)1  Inserting the Battery Pack.Turn over the computer and insert the battery pack until it touch to the secured position.l  Make sure no foreign objects are under the computer. CAUTION l  Make sure the latch is securely locked. Otherwise the battery pack may fall when you carry the computer.l  Do not touch the terminals of the battery pack and the computer. Doing so can make the terminals dirty or damaged, and may cause malfunction of the battery pack and the computer. NOTE l  Note that the computer consumes electricity even when the com-puter power is off. If the battery pack is fully charged, the battery will fully discharge in the following period of time:*1Status Discharge periodFZ-VZSU84U  FZ-VZSU88UWhen power is offApprox. 6 weeks Approx. 12 weeksIn hibernation Approx. 10 days Approx. 20 daysIn sleep*2 Approx. 7 days  Approx. 14 days*1 <Only for model with Built-in Bridge Battery> The period of time is the value when the built-in bridge battery is fully charged.*2 <Only for model with LAN> If “Wake Up from wired LAN” is enabled, the period of time will be shorter.1ABFirst-time Operation
18Getting StartedFirst-time Operation2  Attaching the pen (included) to the computer.A  Pass one of the loops through the hole.㪈㪉㪊 㪋B Pass one of the loops through another loop.㪈㪉㪊 㪋C Thread the second loop on the tether through the hole as illustrated.㪊D Pass the pen and tether through the second loop.㪋 CAUTION l  Do not pull the tether with excessive force. The pen (included) may hit the computer, person’s body or other objects when re-leased.3  Connect your computer to a power outlet.The battery charging starts automatically. CAUTION l  Do not disconnect the AC adaptor until the rst-time operation procedure is completed.l  When using the computer for the rst time, do not connect any peripheral device  (including wired LAN cable) except the battery pack and AC adaptor.l  Handling the AC adaptor Problems such as sudden voltage drops may arise during pe-riods of thunder and lightning. Since this could adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless running from the battery pack alone.4  Turn on the computer.Press and hold the power switch   (B) until the power indicator  (A) lights. CAUTION l  Do not press the power switch repeatedly or do not hold the power switch for four seconds or longer.㻞㻝3㻭㻮4
19Getting Started5  Setup Windows.Follow the on-screen instructions.l  The computer restarts several times. Do not touch the screen or tablet buttons, and wait until the drive indicator   has turned off.l  After the computer is turned on, the screen remains black or unchanged for a while, but this is not a malfunction. Wait for a moment until the Windows setup screen appears.l  Setup of Windows will take approximately    5 minutes /   20 minutes.  Go to the next step, conrming each message on the display.l   Follow the steps below.A  When “Enable sensors” is displayed, touch [Enable this sensor].B  When the [User Account Control] screen is displayed, touch [Yes].C   At the [Display Rotation Tool] conrmation screen, touch [Yes].The computer restarts automatically, and the setting is enabled.l   You can set the Wireless Network after the setup of Windows is complete. If “Get online” is displayed, select “Skip this step”. “Join a wireless network” screen may not appear. CAUTION l  You can change the user name, password, image and security setting after setup of Windows.l  Remember your password. If you forget the password, you can-not use Windows. Creating a password reset disk beforehand is recommended.l  Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @, &, space. In particular, if you create a user name (account name) that includes the “@” mark, a password will be requested at the log-on screen, even if no password has been set. If you try to log on without entering a password, “The user name or pass-word is incorrect.” may be displayed and you will not be able to  sign in /   log on to Windows  (è OPERATING INSTRUCTIONS - Basic Guide).6   Update the on-screen manualA Connect to the internet. Log on to Windows as an administrator.  For further information, refer to   Connect to a network.B  Update the on-screen manual. On the Start screen, click the [Manual Selector] tile. Double-click [Manual Selector] on the desktop.Follow the on-screen instructions.7  Create a recovery disc.A recovery disc allows you to install OS and restore its factory de-fault condition, in case, the recovery partition of the ash memory is damaged. We recommend creating a recovery disc before you begin using the computer. Refer to è  Reference Manual “Recovery Disc Creation Utility” about creating the disc.
Panasonic System Communications  Company of North AmericaTwo Riverfront Plaza,Newark NJ 07102Panasonic Australia Pty. LimitedACN 001 592 187 ABN 83 001 592 1871 Innovation Road, Macquarie Park NSW 2113Web Site : http://panasonic.net/Panasonic Canada Inc.5770 Ambler Drive, Mississauga,Ontario L4W 2T3© Panasonic Corporation 2014Printed in TaiwanHS1214-0DFQW5A84ZAT

Navigation menu