Microlab Electronics CHAIRMAN BLUETOOTH SPEAKER User Manual 1

Microlab Electronics Co.,Ltd. BLUETOOTH SPEAKER 1

User Manual

ChairmanFCCID:OR8-CHAIRMANIC:21231-CHAIIRMAN80-B77BT-97-0001(US)-01 2017-11-2
DU When apparatus operation and installation instructions contain instructions contain instructions for use by service personnel, such instructions shall be separate in format from other instructions and preceded by the word “CAUTION” and the following or the equivalent. “These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained is the operating instructions unless you are qualified to do so”15. The highest environmental temperature suitable for this product is 0℃ to 35℃ for indoor use only .16. Appliable to altitude below 2000 metersETL certification declaration
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.FCC and Canada EMC Compliance InformationChairmanThe device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. L'appareil peut être utilisé dans une condition d'exposition portable sans restriction.
音频输音频输音频输音频输音频输音频输音频输音频输“Chairman”ACIN:100 240V 50/60Hz1.5A- ~

Navigation menu