Micron Electronics 1X Tracker User Manual AIR2011 Interface Protocol

Micron Electronics LLC. Tracker AIR2011 Interface Protocol

Contents

User Manual

1CDMA/GPS TrackerPrime One XUser ManualRevision: 1.00Document TitlePrime One X User manualVersion1.00Finale Date2016-03-22StatusReleasedDocument Control IDTRACKER Prime One X
2Contents1 Introduction...................................................................................................................................... 32 Product Overview............................................................................................................................ 32.1 Appearance............................................................................................................................32.2 Buttons/12PIN Interface Description................................................................................... 32.3 LED Description................................................................................................................... 43 Getting Started................................................................................................................................. 53.1 Parts List................................................................................................................................53.2 Battery Charging................................................................................................................... 63.3 Prime One X Data Cable.......................................................................................................63.4 Power on/Power off.............................................................................................................. 63.5 Insert SIM Card.....................................................................................................................73.6 How GPS position Fix.......................................................................................................... 74 Trouble shooting and Safety info.....................................................................................................84.1 Trouble shooting................................................................................................................... 84.2 Safety info............................................................................................................................. 8
31 IntroductionPrime One X is a powerful GPS locator which is designed for vehicle, human, pets and assetstracking , including emergency call function meanwhile(e.g. a wearable product). With superiorreceiving sensitivity, fast CDMA frequencies 850/1900. Its location can be real time or scheduletracked by backend server or specified terminals. Based on the embedded wireless trackingprotocol, Prime One X can communicate with the backend server through CDMA network, andtransfer reports of emergency, Geo-fencing, device status and scheduled GPS position etc…Service provider is easy to setup their tracking platform based on the functional wireless trackingprotocol.2 Product Overview2.1 AppearanceFigure 2-12.2 Buttons/12PIN Interface DescriptionButton /12PIN Interface DescriptionKEY/interfaceDescriptionPower ButtonPower on Prime One XPower off Prime One X (If power key is enabled)
4FunctionButtonGeo-Fence modeLong press the key to enable/disable Geo-Fence ID0Geo-Fence in current position modeLong press the key to enable/disable Geo-Fence ID0. If enable Geo-FenceID0, using the current position as the centre of Geo-Fence 0.SOS mode (default)Long press the key to active SOS alarm12PINinterface(USBport)Connect a 5V DC adapter can power on Prime One X and charge the internalbatteryConnect a 3.7V Li-ion or Li-Polymer battery can power on Prime One XBackend server developer or administrator can use the data cable to configurePrime One X (by RD or engineer not by end user).Reset ButtonClick the key will turn off internal VBAT when OS is abnormal, and thenpress Power Key to restart Prime One X.2.3 LED DescriptionFigure 2-2There are four LED lights in Prime One X device, the description as following.LightEventStateGPS LEDGPS fixedFast flashGPS has been turned offDarkCDMALED(3G)Power on and normalSlow flashPower offDarkWIFI LEDWIFI onSlow flashWIFI offDarkPower LEDPower on and normalDarkFully chargedSolidIn chargingSlow flash
5Figure 2-33 Getting Started3.1 Parts ListNamePictureRemarkPrime One XLocaterThe CDMA/GPS locator.AC-DC PowerAdapterIt is used to charge the internal battery ofPrime One X.Prime One XData and chargerCableIt the data cable which can be used forfirmware upgrading and configuration.It also includes the charger interface on thePrime One X (by RD or engineer not by enduser)..
63.2 Battery ChargingThe following items are suggestion for battery charge, please pay more attention.Please connect AC-DC power adapter with Prime One X device.Insert the AC-DC power adapter into the power socket.During the charging process, the Power LED light will solid. When the battery isfully charged, the Power LED light will be Ever-light.You can also charge the battery using charging cable which connects Prime One Xdevice with the Adapter.Charging will last about 5 hours.Note: If the Prine One X device is firstly used, please make sure the battery is fully charged,which will make the life of battery much longer.3.3 Prime One X Data CablePrime One X Data Cable is a cable with a 12PIN connector.The data cable is used for data download, which will be used for firmware update orconfiguration and can be used for charging at the same time (by RD or engineer not byend user).Figure 3-13.4 Power on/Power offFigure 3-2Power on:Press the Power Button at least 3 seconds and release it to power on Prime One Xdevice. Note that, the Power LED light will fast flash.
7Power off:Press the power button about 3 seconds; Power LED light will fast flash and thenturn off, which indicates that Prime One X device has been powered off.Note: the user can not power off Prime One X if the power key is disabled byprotocol.3.5 Insert SIM CardFigure 3-33.6 How GPS position FixFigure 3-4
84 Trouble shooting and Safety info4.1 Trouble shooting4.2 Safety infoThe following items are suggestion for safety use, please pay more attention.Please do not disassemble the device by yourself.Please do not put the device on the overheating or too humid place, avoid exposureto direct sunlight. Too high temperature will damage the device or even cause thebattery explosion.Please do not use Prime One X on the airplane or near medical equipment.FCC Caution.§ 15.19 Labelling requirements.TroublePossible ReasonSolutionMessages can’t bereported to thebackend server byMobile network.APN is wrong. SomeAPN can not visit theinternet directly.Ask the network operator for the rightAPN.The IP address or port ofthe backend server iswrong.Make sure the IP address for thebackend server is an identified addressin the internet.Unable to poweroff Prime One X.The function of power keywas disabled byAT+GTFKS.Enable the function of power key byAT+GTFKS.Battery can not bechargedThe battery has not beenused for too long time andhas been locked.Using a external power source with 3.6Vto 4.2V DC power supply to active thebattery or apply for after sale help.Prime One X can’tfix GPSsuccessfully.The GPS signal is weak.Please move Prime One X to a placewith open sky.It is better to let the top surface face tothe sky. (The same surface withindication LED)
9This device complies with part 15 of the FCC Rules. Operation is subject to thecondition that this device does not cause harmful interference.§ 15.21 Information to user.Any Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.§ 15.105 Information to the user.Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.-Consult the dealer or an experienced radio/TV technician for help.Specific Absorption Rate (SAR) information:This mobile phone meets the government's requirements for exposure to radio waves.The guidelines are based on standards that were developed by independent scientificorganizations through periodic and thorough evaluation of scientific studies. Thestandards include a substantial safety margin designed to assure the safety of allpersons regardless of age or health.FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue. This device was tested for typical body-wornoperations with the back of the handset kept 0.5cm from the body. To maintaincompliance with FCC RF exposure requirements, use accessories that maintain a0.5cm separation distance between the user's body and the back of the handset. Theuse of belt clips, holsters and similar accessories should not contain metalliccomponents in its assembly. The use of accessories that do not satisfy theserequirements may not comply with FCC RF exposure requirements, and should beavoided.Body-worn OperationThis device was tested for typical body-worn operations. To comply with RF exposurerequirements, a minimum separation distance of 0.5cm must be maintained betweenthe user’s body and the handset, including the antenna. Third-party belt-clips, holsters,and similar accessories used by this device should not contain any metalliccomponents. Body-worn accessories that do not meet these requirements may notcomply with RF exposure requirements and should be avoided. Use only the suppliedor an approved antenna.

Navigation menu