Micron Electronics ATC CDMA/GPS Tracker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2518721
Application ID	ZQgA90R9yBQIDy9e6CuItQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.64kB (320560 bits)
Date Submitted	2015-01-30 00:00:00
Date Available	2015-01-30 00:00:00
Creation Date	2015-01-29 11:54:41
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2015-01-29 11:54:41
Document Title	Microsoft Word - Prime ATC User Manual V1.00-FCC_0129.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	administrator

CDMA/GPS Tracker
Prime ATC
User Manual
Revision: 1.00
Document Title
Prime ATC User manual
Version
1.00
Finale Date
2014-12-29
Status
Released
Document Control ID
TRACKER Prime ATC
Contents
1 Introduction....................................................................................................................................3
2 Product Overview ..........................................................................................................................3
2.1 Appearance..........................................................................................................................3
2.2 Buttons/Micro USB Interface Description..........................................................................3
2.3 LED Description .................................................................................................................4
3 Getting Started ...............................................................................................................................5
3.1 Parts List .............................................................................................................................5
3.2 Battery Charging .................................................................................................................5
3.3 Prime ATC Data Cable ........................................................................................................6
3.4 Power on/Power off.............................................................................................................6
4 Trouble shooting and Safety info ...................................................................................................7
4.1 Trouble shooting .................................................................................................................7
4.2 Safety info ...........................................................................................................................7
1 Introduction
Prime ATC is a powerful GPS locator which is designed for vehicle, pets and assets tracking.
With superior receiving sensitivity, fast TTFF and CDMA frequencies 800/1900. Its location can
be real time or schedule tracked by backend server or specified terminals. Based on the embedded
wireless tracking protocol, Prime ATC can communicate with the backend server through CDMA
network, and transfer reports of emergency, Geo-fencing, device status and scheduled GPS
position etc… Service provider is easy to setup their tracking platform based on the functional
wireless tracking protocol.
2 Product Overview
2.1 Appearance
Figure 1-1
2.2 Buttons/Micro USB Interface Description
Button /Micro USB Interface Description
KEY/interface
Description
Power Key
Power on Prime ATC
Power off Prime ATC (If power key is enabled)
Function Key
Geo-Fence mode
Long press the key to enable/disable Geo-Fence ID0
Geo-Fence in current position mode
Long press the key to enable/disable Geo-Fence ID0. If enable Geo-Fence
ID0, using the current position as the centre of Geo-Fence 0.
SOS mode (default)
Long press the key to active SOS alarm
Micro USB
interface
Connect a 5V DC adapter can power on Prime ATC and charge the internal
battery
Connect a 3.7V Li-ion or Li-Polymer battery can power on Prime ATC
Backend server developer or administrator can use the data cable to configure
Prime ATC
Reset Key
Click the key will turn off internal VBAT when OS is abnormal, and then
press Power Key to restart Prime ATC.
Note: Reset key is invalid when external battery is used.
2.3 LED Description
Figure 1-2
There are three LED lights in Prime ATC device, the description as following.
Light
Event
State
GPS LED
GPS fixed failed
Slow flash (blue)
GPS has been turned off
Dark
Network has been registered
Slow flash (green)
Power off
Dark
Power on and normal
Dark
Fully charged
Slow flash (green)
In charging
Slow flash (red)
CDMA LED
Power LED
Power key was pressed and prepare to
power off
Fast flash (red)
Power key was pressed and prepare to
power on
Fast flash (green)
3 Getting Started
3.1 Parts List
Name
Picture
Remark
Prime ATC
Locater
The CDMA/GPS locator.
AC-DC Power
Adapter
It is used to charge the internal battery of
Prime ATC.
Prime ATC Data
and charger Cable
It the USB data cable which can be used for
firmware upgrading and configuration.
It also includes the charger interface on the
Prime ATC.
3.2 Battery Charging
The following items are suggestion for battery charge, please pay more attention.
‹ Please connect AC-DC power adapter with Prime ATC device.
‹ Insert the AC-DC power adapter into the power socket.
‹ During the charging process, the Power LED light will flash fast. When the battery is
fully charged, the Power LED light will be Ever-light.
‹ You can also charge the battery using USB cable which connects Prime ATC
device with the PC.
‹ Charging will last about 5 hours.
Note: If the Prime ATC device is firstly used, please make sure the battery is fully charged,
which will make the life of battery much longer.
3.3 Prime ATC Data Cable
Prime ATC Data Cable is a cable with a Micro USB connector.
The USB data cable is used for data download, which will be used for firmware update
or configuration and can be used for charging at the same time.
Figure 2-1
3.4 Power on/Power off
Figure 2-2
Power on:
‹ Press the Power key at least 3 seconds and release it to power on Prime ATC
device. Note that, the Power LED light will fast flash.
Power off:
‹ Press the power key about 3 seconds; Power LED light will fast flash and then turn
off, which indicates that Prime ATC device has been powered off.
Note: the user can not power off Prime ATC if the power key is disabled by
protocol.
4 Trouble shooting and Safety info
4.1 Trouble shooting
Trouble
Possible Reason
Solution
Messages can’t be
reported to the
backend server by
GPRS.
APN is wrong. Some
APN can not visit the
internet directly.
Ask the network operator for the right
APN.
The IP address or port of
the backend server is
wrong.
Make sure the IP address for the
backend server is an identified address
in the internet.
Unable to power
off Prime ATC.
The function of power key
was disabled by
AT+GTFKS.
Enable the function of power key by
AT+GTFKS.
Battery can not be
charged
The battery has not been
used for too long time and
has been locked.
Using a external power source with 3.6V
to 4.2V DC power supply to active the
battery or apply for after sale help.
Prime ATC can’t
fix GPS
successfully. GPS
LED flashes
slowly.
The GPS signal is weak.
Please move Prime ATC to a place with
open sky.
It is better to let the top surface face to
the sky. (The same surface with
indication LED)
4.2 Safety info
The following items are suggestion for safety use, please pay more attention.
‹ Please do not disassemble the device by yourself.
‹ Please do not put the device on the overheating or too humid place, avoid exposure
to direct sunlight. Too high temperature will damage the device or even cause the
battery explosion.
‹ Please do not use Prime ATC on the airplane or near medical equipment.
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This CDMA/GPS tracker meets the government's requirements for exposure to radio
waves. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific studies.
The standards include a substantial safety margin designed to assure the safety of all
persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6
W/kg averaged over one gram of tissue. Device types: ATC (FCC ID: ZKQ-ATC)
has also been tested against this SAR limit. The highest SAR value reported under
this standard during product certification when properly worn on the body is
1.12W/kg. This device was tested for typical body-worn operations with the back of
the handset kept 0 cm from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a 0 cm separation distance between the
user's body and the back of the handset. The use of belt clips, holsters and similar
accessories should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance of 0 cm must be maintained between the
user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and
similar accessories used by this device should not contain any metallic components.
Body-worn accessories that do not meet these requirements may not comply with RF
exposure requirements and should be avoided. Use only the supplied or an approved
antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2015:01:29 11:54:41+08:00
Create Date                     : 2015:01:29 11:54:41+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Prime ATC User Manual V1.00-FCC_0129.doc
Creator                         : administrator
Document ID                     : uuid:734aa6a9-44de-4ee1-b20a-f3e217ec488b
Instance ID                     : uuid:14154e15-9d4f-4060-b02d-0ff1b24f072c
Page Count                      : 9
Author                          : administrator

EXIF Metadata provided by EXIF.tools