Micron Electronics PLC Tracker User Manual AIR2011 Interface Protocol

Micron Electronics LLC. Tracker AIR2011 Interface Protocol

Contents

User Manual

1CDMA/GPS TrackerAT PLUS_CDMA(3G)User ManualRevision: 1.00Document TitleAT PLUS_CDMA(3G) User manualVersion1.00Finale Date2016-03-11StatusReleasedDocument Control IDTRACKER AT PLUS_CDMA(3G)
2Contents1 Introduction...................................................................................................................................... 32 Product Overview............................................................................................................................ 32.1 Appearance............................................................................................................................32.2 Buttons/12PIN Interface Description................................................................................... 32.3 LED Description................................................................................................................... 43 Getting Started................................................................................................................................. 53.1 Parts List................................................................................................................................53.2 Battery Charging................................................................................................................... 53.3 AT PLUS_CDMA(3G) Data Cable.......................................................................................53.4 Power on/Power off.............................................................................................................. 64 Trouble shooting and Safety info.....................................................................................................74.1 Trouble shooting................................................................................................................... 74.2 Safety info............................................................................................................................. 7
31 IntroductionAT PLUS_CDMA(3G) is a powerful GPS locator which is designed for vehicle and assetstracking. With superior receiving sensitivity, fast CDMA frequencies 800/1900. Its location can bereal time or schedule tracked by backend server or specified terminals. Based on the embeddedwireless tracking protocol, AT PLUS_CDMA(3G) can communicate with the backend serverthrough CDMA network, and transfer reports of emergency, Geo-fencing, device status andscheduled GPS position etc… Service provider is easy to setup their tracking platform based onthe functional wireless tracking protocol.2 Product Overview2.1 AppearanceFigure 1-12.2 Buttons/12PIN Interface DescriptionButton /12PIN Interface DescriptionKEY/interfaceDescriptionPower KeyPower on AT PLUS_CDMA(3G)Power off AT PLUS_CDMA(3G) (If power key is enabled)Function KeyGeo-Fence modeLong press the key to enable/disable Geo-Fence ID0Geo-Fence in current position modeLong press the key to enable/disable Geo-Fence ID0. If enable Geo-FenceID0, using the current position as the centre of Geo-Fence 0.SOS mode (default)Long press the key to active SOS alarm
412PINinterfaceConnect a 3.7V Li-ion or Li-Polymer battery can power on ATPLUS_CDMA(3G)Backend server developer or administrator can use the data cable to configureAT PLUS_CDMA(3G) (by RD or engineer not by end user).Reset KeyClick the key will turn off internal VBAT when OS is abnormal, and thenpress Power Key to restart AT PLUS_CDMA(3G).2.3 LED DescriptionFigure 1-2There are four LED lights in AT PLUS_CDMA(3G) device, the description as following.LightEventStatePower LEDPower on and normalDarkFully chargedSolidIn chargingSlow flashCDMA LEDPower on and normalSlow flashPower offDarkWIFI LEDWIFI onSlow flashWIFI offDarkGPS LEDGPS fixedFast flashGPS has been turned offDark
53 Getting Started3.1 Parts ListNamePictureRemarkATPLUS_CDMA(3G) LocaterThe CDMA/GPS locator.ATPLUS_CDMA(3G) Data and chargerCableIt the data cable which can be used forfirmware upgrading and configuration (byRD or engineer not by end user).It also includes the charger interface on theAT PLUS_CDMA(3G).3.2 Battery ChargingThe following items are suggestion for battery charge, please pay more attention.During the charging process, the Power LED light will solid. When the battery isfully charged, the Power LED light will be Ever-light.You can charge the battery using charging cable which connects ATPLUS_CDMA(3G) device with the Adapter.Charging will last about 5 hours.Note: If the AT PLUS_CDMA(3G) device is firstly used, please make sure the battery isfully charged, which will make the life of battery much longer.3.3 AT PLUS_CDMA(3G) Data CableAT PLUS_CDMA(3G) Data Cable is a cable with a 12PIN connector.The data cable is used for data download, which will be used for firmware update orconfiguration and can be used for charging at the same time (by RD or engineer not byend user). .
6Figure 2-13.4 Power on/Power offFigure 2-2Power on:Press the Power key at least 3 seconds and release it to power on ATPLUS_CDMA(3G) device. Note that, the Power LED light will fast flash.Power off:Press the power key about 3 seconds; Power LED light will fast flash and then turnoff, which indicates that AT PLUS_CDMA(3G) device has been powered off.Note: the user can not power off AT PLUS_CDMA(3G) if the power key isdisabled by protocol.
74 Trouble shooting and Safety info4.1 Trouble shooting4.2 Safety infoThe following items are suggestion for safety use, please pay more attention.Please do not disassemble the device by yourself.Please do not put the device on the overheating or too humid place, avoid exposureto direct sunlight. Too high temperature will damage the device or even cause thebattery explosion.Please do not use AT PLUS_CDMA(3G) on the airplane or near medicalequipment.FCC Caution.§ 15.19 Labelling requirements.This device complies with part 15 of the FCC Rules. Operation is subject to thecondition that this device does not cause harmful interference.§ 15.21 Information to user.TroublePossible ReasonSolutionMessages can’t bereported to thebackend server byMobile network.APN is wrong. SomeAPN can not visit theinternet directly.Ask the network operator for the rightAPN.The IP address or port ofthe backend server iswrong.Make sure the IP address for thebackend server is an identified addressin the internet.Unable to power offATPLUS_CDMA(3G).The function of power keywas disabled byAT+GTFKS.Enable the function of power key byAT+GTFKS.Battery can not bechargedThe battery has not beenused for too long time andhas been locked.Using a external power source with 3.6Vto 4.2V DC power supply to active thebattery or apply for after sale help.ATPLUS_CDMA(3G)can’t fix GPSsuccessfully.The GPS signal is weak.Please move AT PLUS_CDMA(3G) to aplace with open sky.It is better to let the top surface face tothe sky. (The same surface withindication LED)
8Any Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.§ 15.105 Information to the user.Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.-Consult the dealer or an experienced radio/TV technician for help.This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operated withminimum distance 20cm between the radiator & your body.

Navigation menu