Micron Electronics PME Tracker User Manual 15 Prime ME UserMan r3

Micron Electronics LLC. Tracker 15 Prime ME UserMan r3

15_Prime ME UserMan,r3

1 Tracker Prime ME User Manual Revision: 1.00
2Contents 1 Introduction....................................................................................................................................3 2 Product Overview ..........................................................................................................................3 2.1 Appearance..........................................................................................................................3 2.2 Buttons/Micro USB Interface Description..........................................................................3 2.3 LED Description .................................................................................................................4 3 Getting Started ...............................................................................................................................5 3.1 Parts List .............................................................................................................................5 3.2 Battery Charging.................................................................................................................5 3.3 Prime-ME Data Cable.........................................................................................................6 3.4 Power on/Power off.............................................................................................................6 4 Trouble shooting and Safety info...................................................................................................7 4.1 Trouble shooting .................................................................................................................7 4.2 Safety info...........................................................................................................................7
31 Introduction Prime-ME is a powerful GPS locator which is designed for vehicle, pets and assets tracking. With superior receiving sensitivity, fast TTFF and GSM frequencies 850/900/1800/1900, and WiFi hotspot aiding position function. Its location can be real time or schedule tracked by backend server or specified terminals. Based on the embedded wireless tracking protocol, Prime-ME can communicate with the backend server through GPRS/GSM network, and transfer reports of device status and scheduled GPS position, WiFi hotspot aiding position etc… Service provider is easy to setup their tracking platform based on the functional wireless tracking protocol. 2 Product Overview 2.1 Appearance Figure 1-1 2.2 Buttons/Micro USB Interface Description Button /Micro USB Interface Description KEY/interface Description Power Key Power on Prime-ME Power off Prime-ME (If SIM card is not inserted)
4Micro USB interface Connect a 5V DC adapter can power on Prime-ME and charge the internal battery Backend server developer or administrator can use the data cable to configure Prime-ME Reset Key Click the key will turn off internal VBAT when OS is abnormal, and then press Power Key to restart Prime-ME. 2.3 LED Description Figure 1-2 There are three LED lights in Prime-ME device, the description as following. Light Event State GPS fixed Fast flash GPS has been turned off Dark BLUE LED Device standby Slow flash per 30 seconds Power on and normal Dark Power on and low battery voltage Slow flash RED LED Power off process solid Power on and normal Dark Fully charged Solid GREEN LED In charging Slow flash
53 Getting Started 3.1 Parts List Name Picture Remark Prime-ME Locater The GSM/GPRS/GPS locator. AC-DC Power Adapter It is used to charge the internal battery of Prime-ME. Prime-ME Data and charger Cable It the USB data cable which can be used for firmware upgrading and configuration. It also includes the charger interface on the Prime-ME. 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention.  Please connect AC-DC power adapter with Prime-ME device.  Insert the AC-DC power adapter into the power socket.  During the charging process, the GREEN LED light will flash slow. When the battery is fully charged, the GREEN LED light will be Ever-light.  You can also charge the battery using USB cable which connects Prime-ME device with the PC.  Charging will last about 2 hours. Note: If the Prime-ME device is firstly used, please make sure the battery is fully charged, which will make the life of battery much longer.
63.3 Prime-ME Data Cable Prime-ME Data Cable is a cable with a Micro USB connector. The USB data cable is used for data download, which will be used for firmware update or configuration and can be used for charging at the same time. Figure 2-1 3.4 Power on/Power off Figure 2-2 Power on:  Press the Power key at least 3 seconds and release it to power on Prime-ME device. Note that, the three LED lights will flash in turn. Power off (if SIM card is not inserted):  Press the power key about 3 seconds; RED LED light will be solid and then turn off, which indicates that Prime-ME device has been powered off. Note: the user can not power off Prime-ME by power key if SIM card is inserted.
74 Trouble shooting and Safety info 4.1 Trouble shooting 4.2 Safety info The following items are suggestion for safety use, please pay more attention.  Please do not disassemble the device by yourself.  Please do not put the device on the overheating or too humid place, avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion.  Please do not use Prime-ME on the airplane or near medical equipment. Trouble Possible Reason Solution Messages can’t be reported to the backend server by Mobile network. The IP address or port of the backend server is wrong. Make sure the IP address for the backend server is an identified address in the internet. Battery can not be charged The battery has not been used for too long time and has been locked. Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help. Please move Prime-ME to a place with open sky. Prime-ME can’t fix GPS successfully. The GPS signal is weak. It is better to let the top surface face to the sky. (The same surface with indication LED)
8FCC Notice: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation. This equipment generates us es and can radiate radio frequency energy and, if not install ed and used in accordance with the instructions, may ca use harmful interference to radio communication s. However, there is no guar antee that interference will not occur in a particular installation. If this equipment does c ause harmful i nterference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authorit y to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This devic e may not cause harmful interference. (2) This device must accept any interf erence received, including interference that may cause undesired operation. RF Radiation Exposure Statement: 1. This Transmitter has been demonstrated co-location compliance requirements as documented in this filing. 2. This equipment compliance with FCC RF radiation exposure limits set forth for an uncontrolled environment for body-worn configuration, it must be used for the distance minimum 5mm from the body. 3. The maximum summation of SAR was 1.33W/Kg(1g) for Body.
9 WARNINGS: BATTERY AND CHARGERS: Unplug the charger from the electrical plug and the device when not in use. Use the AC power s upply defined in the specifications of the charger. An improper power voltage may cause a fire or a malfunction of the charger. If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using the cable at once. Otherwise, it may lead to an electric shock, a short circuit of the charger, or a fire. Adapter shall be installed near the equipment and shall be easily accessible. CAUTION: RISK OF EXPLOSION IF AN INCORR ECT TYPE OF BATTERY IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. DO NOT disassemble or replace the battery. If you suspect there is something wrong with the battery, please carry the unit to the service centre for help. The battery should not be disposed together with other waste. The battery has to be disposed at an authorized place for re cycling of electrical and electroni c appliances. By collecting and recycli ng waste, you help save natural resources, and make sure the product is disposed in an environmental friendly and healthy way. Keep the device away from source of heat and fire, such as a heater, microwave oven, stove, water heater, radiator, or candle. Stop using your device or applications for a while if the device is overheated. If skin is exposed to an overheated devic e for an extended period, low temperature burn symptoms, such as red spots and darker pigmentation, may occur. Do not allow children or pet s to bite or suck the dev ice or accessories. Doing so may result in damage or explosion. Observe local laws and regulations, and respect the privacy and legal rights of others.
10EU Regulatory Conformance Hereby, we dedares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Certification Information (SAR) This devic e meets guidelines for exposur e to radio waves. Your device is a low-power radio transmitter and receiv er. As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves. These guidelines were dev eloped by the i ndependent scientific organization International Commission on Non-Ionizing Radiation Protection (ICNIRP) and include safety measures designed to ensure safety for all users, regardless of age and health. The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a device. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the device when being operated can be well below the value. This is becaus e the device is designed to use the minimum power required to reach the network. The SAR limit also adopted by Europe is 2.0/4.0 W/kg averaged over 10 grams of tissue. The highest SAR value for this device type when properly worn on the body is 0.707W/kg. Operation Environment Keep the ambient temper ature between -10°C and 50°C while the device working.

Navigation menu