AutoVISION Software User Manual Autovisionmanual

2014-03-18

• AutoVISION Software User Manual
  • Table of Contents
  • About AutoVISION Software
  • System Requirements
  • 1 Quick Start
    • AutoVISION Overview
    • Vision HAWK Hardware
    • Vision HAWK C-Mount Hardware
    • Vision MINI Hardware
    • Vision MINI Xi Hardware
    • Select a Device
    • Adjust Camera Settings
    • Edit the Job
    • Run the Job
    • Save the Job
    • Additional Notes: CPU Idle States (C-States)
  • 2 Connect
    • Launch the AutoVISION User Interface
    • Select Device
    • Job Changeover
  • 3 Image
    • Image Overview
    • Image Area
    • Image Control Tools
    • Auto Calibration
  • 4 Edit
    • Edit Overview
    • Tools Overview
    • Camera
    • Locate Tool
    • Decode Tool
    • OCR Tool
    • Count Tool
    • Presence/Absence Tool
    • Measure Tool
    • Match Strings Tool
    • String Format Tool
    • Logic Tool
    • OCV Tool
    • Symbol Quality Verification Tool
    • Inspection Outputs
    • Microscan Link
    • Data Navigator
    • Terminal
    • Serial Commands
  • 5 Run
    • Run Overview
    • Image Display Options
    • Image Saving Options
    • Inspection Statistics
  • 6 Firmware and License Upgrades
    • Updating Firmware
    • Camera License Upgrade
  • 7 Example Job: Gasket Inspection
    • Start Gasket Job
    • Add Measure Tool
    • Add Three Presence/Absence Tools
    • Report Gasket Inspection Status and Gasket Height
    • Run the Gasket Job