HS 2D Handheld Reader Quick Start Guide Hs2dquickstartguide
Hs2Dquickstartguide hs2dquickstartguide hs2dquickstartguide ec4e88e1-b2fb-4ace-8e31-5765520c694d _att microscan :
Hs2Dquickstartguide hs2dquickstartguide hs2dquickstartguide fad92a3b-1afb-4f17-bdde-f1b697bc4ff4 _att microscan :
2009-06-17
: Microscan Hs2Dquickstartguide hs2dquickstartguide c4af1d43-8a35-4e35-a936-fa64c7e01464 _att
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Quick Start Guide Step 1 — Check Required Hardware HS-2D Handheld Reader Step 2 — Set Up Hardware (USB) Note: The USB interface draws its power from the host. HS-2D USB Hardware 1. HS-2D Handheld Reader 2. 6 ft. USB cable (pre-installed) Hardware for USB HS-2D RS-232 Hardware 1. HS-2D Handheld Reader 2. Cable clip attachment 3. Spacer 4. Two threaded screws 5. 8 ft. coiled RS-232 cable 6. Power supply The RS-232 cable is affixed to the handle with two screws, a spacer, and a cable clip, which can be removed as shown here. 1 HS-2D Handheld Reader 98-000107-01 2 USB Cable Included Installation Steps for USB 1. Connect the USB cable (2) to the HS-2D (1). 2. Connect the USB cable (2) to the host. You do not need to power off your host computer. 3. Open any program in your host computer that can receive keyboard text. 4. Read the Reset to USB Factory Defaults symbol below. 5. Read the Save Settings symbol below. USB Hardware Refer to the HS-2D Handheld Reader User’s Manual for information about changing or adding cables. Reset to USB Factory Defaults Test Symbol (ABCDEFGHIJKLMNOP) Save Settings P/N 83-110002 Rev A Step 2 — Set Up Hardware (RS-232) Hardware for RS-232 1 3 HS-2D Handheld Reader 98-000107-01 RS-232 Interface Kit (USA) 98-000074-04 RS-232 Interface Kit (Europe) 98-000074-05 RS-232 Interface Kit (UK) 98-000074-06 Step 3 — Install ESP ESP Software can be found on the Microscan Tools CD that is packaged with the HS-2D. 1. Follow the prompts to install ESP from the CD. 2. Click on the ESP icon to run the program. Installation Steps for RS-232 1. Power-off the host. 2. Attach the RS-232 cable to the HS-2D. 3. Connect the RS-232 cable to the power supply cable. 4. Plug in the power supply and power-on the host. 5. Open a terminal program (HyperTerminal, for example) and set RS-232 Hardware 57.6K baud rate, 8 data bits, none parity, and 2 stop bits. 6. Read the Reset to RS-232 Factory Defaults symbol below. 7. Read the Save Settings symbol below. Test Symbol (ABCDEFGHIJKLMNOP) Save Settings When you start ESP, the following menu will appear: Note: ESP can also be installed from the Download Center at www.microscan.com. Minimum System Requirements • 166 MHz Pentium processor (Pentium II processor recommended) • Windows Vista, XP, or 2000 operating system • Internet Explorer 5.0 or higher • 64 MB minimum RAM (128+ MB RAM recommended) • 80 MB hard drive space • 800 x 600 minimum 256 color display (1024 x 768 32-bit color recommended) Important: The reader must be in USB or RS-232 Mode to connect to ESP. Read the symbol below that corresponds with your communication interface. Reset to RS-232 Factory Defaults Step 4 — Select Model USB Mode RS-232 Mode 1. Click the HS-2D button and then click OK. If you do not want to make this selection every time you start ESP, uncheck “Show this dialog at startup”. 2. Select the default reader name (HS-2D-1), or type a name of your choice in the Description text field and click OK. 3. Click Yes when this dialog appears: Step 5 — Select Protocol Step 6 — Connect to ESP Select the communications protocol you are using and click Next. USB USB Once you have clicked Connect in the USB reader ID dialog (Step 5), the CONNECTED message will appear in a green box in the status bar at the bottom right of the screen. Click the Show Connect Symbol button Step 7 — Configure the Reader ESP’s EZ Mode is the first view that appears once you are connected. This view features simple instructions as well as tools for decoding symbol data and taking image captures. You are now ready to configure the USB HS-2D using ESP. RS-232 1. You will see the USB Connect Mode symbol. Print and decode this symbol (if you have not already done so in Step 3) to ensure that you are in the correct communications mode. Keep the printed symbol in a convenient place for future use. Click Next when you are finished. 2. You will then see your reader’s ID in the Select Device field. Click Connect. Once you have selected RS-232 settings and COM port and clicked Connect, the CONNECTED message will appear in a green box in the status bar at the bottom right of the screen. Decode symbols and capture images with a single click in EZ Mode. You are now ready to configure the RS-232 HS-2D using ESP. RS-232 Click the Show Connect Symbol button Print and decode the RS-232 Connect Mode symbol (if you have not already done so in Step 3) and decode it with the reader to ensure that you are in the correct communications mode. Keep the printed symbol in a convenient place for future use. Click Next, and then Connect. Step 8 — Practice Targeting The HS-2D features two converging target LEDs to indicate optimal read range. The red and green target LEDs will converge when the reader is held the optimal distance from the symbol. Too far from symbol Too close to symbol Optimal distance – 2.3” (5.8 cm) Test Symbol Copyright ©2009 Microscan Systems, Inc. (ABCDEFGHIJKLMNOP) From here, you can click on App Mode to access tree controls and graphic user interfaces with more comprehensive configuration options.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Page Mode : UseNone XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 8.1.0 (Windows) Creator Tool : FrameMaker 8.0 Modify Date : 2009:06:10 09:19:54-07:00 Create Date : 2005:05:17 07:56:12Z Metadata Date : 2009:06:10 09:19:54-07:00 Format : application/pdf Title : HS-2D Handheld Reader Quick Start Guide Creator : Document ID : uuid:2abfe8d7-4d9c-4049-93bc-dfadec10c036 Instance ID : uuid:19e1f077-438a-4671-90c0-a62eb4af81c6 Page Count : 2 Page Layout : SinglePageEXIF Metadata provided by EXIF.tools