IB 3PC Keyboard Wedge Quick Start Guide Ib3pcquickstartguide
2016-08-18
: Microscan Ib3Pcquickstartguide ib3pcquickstartguide center
Open the PDF directly: View PDF .
Page Count: 1
Download | |
Open PDF In Browser | View PDF |
Quick Start Guide, IB-3 PC MS-3 Laser Scanner Setup Required Hardware Setup for Keyboard Wedge 1. 2. 3. 4. 1. Scan the configuration symbols in frame 4 in order, pausing for a second or two on each until you hear a beep (except for step 4, “Enable all Symbologies,” which does not generate a beep). 2. Mount your scanner in the position that is suitable for your application and begin operations. When scanning, you have five seconds to read a symbol and move on before it is read again. IB-3 PC, P/N FIS-0001-0030G MS-3 Laser Scanner Customer-supplied keyboard Host computer Steps for Connection and Startup SCANNER IB-3PC 1 SERIAL COMM. 2 CONFIG. 3 KEYBOARD WEDGE 3 2 1 98-000049-01 SCANNER IB-3PC 1 SERIAL COMM. 2 CONFIG. 3 KEYBOARD WEDGE 3 2 1 4 HOST/SERIAL 3 98-000049-01 KEYBRD OUT/ POWER IN HOST/SERIAL 2 KEYBOARD IN Note: Setup symbols for the MS-3 Laser Scanner in the next two frames are presented at right angles to each other in order to prevent accidental scanning of the wrong command. KEYBRD OUT/ POWER IN 1 1. Power-off your host computer. 2. Set the IB-3 PC switch to position 1. 3. Connect the scanner (2) and the keyboard (3) to the IB-3 PC as shown. 4. Plug the IB-3 PC cable directly into the host computer’s (4) keyboard port. 5. Power-on host computer. 6. Open a word processor or text editor to see scanned Position 1 data. KEYBOARD IN 2 3 83-210039 Rev C MS-3 Laser Scanner Configuration Symbols 1. Enable configuration mode. MS- CCD Setup The two symbols to the right will setup the MS-2 CCD for reading with the IB-3 PC. Note: There is no beeper on the MS-2 CCD but whenever a good read occurs the reader’s LED will momentarily turn OFF and then ON and the Good Read lamp will flash ON and OFF. 2. Enable Continuous Read 1. 3. Set 5 second timeout. Test Symbol MS-2 CCD Symbols The following bar code symbol can be used to test the operation of the setup: Enable all Symbologies Set Read Mode 1234 Note: Download a copy of the IB-3 PC User Manual, P/N 83-210037, for a complete description of the IB-3 PC and its capabilities. Note: Also see the MS-3 Laser Scanner User Manual, P/N 83-000003. 4. Enable all symbologies (no beep on this one). 5. Save for power-on. 4 5 6
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Create Date : 2003:10:03 15:01:50Z Modify Date : 2015:04:23 15:18:55-07:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 4.05 for Windows Metadata Date : 2015:04:23 15:18:55-07:00 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:64ad1216-f48e-4185-97b6-9e3c0994fdb0 Instance ID : uuid:3bec79f7-d11a-4e89-b20c-68de71ad76aa Format : application/pdf Creator : Title : IB-3PC Keyboard Wedge Quick Start Guide Page Layout : SinglePage Page Count : 1EXIF Metadata provided by EXIF.tools