MS 890 Wiring Box Connection Instructions Ms890wiringboxguide

: Microscan Ms890Wiringboxguide ms890wiringboxguide a497f1fb-fbab-4996-95d8-80fa65963bb9 _att

Open the PDF directly: View PDF .
Page Count: 1

CONNECTION INSTRUCTIONS

1. Mount the IB-890 Wiring Box.

2. Remove the Wiring Box Plug, and connect

the wiring as required.

3. Apply power to the wiring box and confirm that the

LED lamp next to the right side power terminal is green.

The lamp is green if polarity is correct, red if reversed.

4. Turn off power, then plug in the flex strip to scanner

as shown below.

MS-890

Scanner

Flex Strip

Wiring Box

5. Set the scanner squarely on wiring box,

as shown below.

6. Then, tighten four (4) retaining screws to

secure scanner to wiring box.

Scanner Mounting

Screws (4)

Wiring Box Plug

CONNECTION INSTRUCTIONS

MS-890 Scanner

with IB-890 Wiring Box

Microscan Corporate Office

Tel 425 226 5700

Fax 425 226 8250

Microscan Europe

Tel 31 172 423360 / Fax 31 172 423366

Microscan Asia Pacific RO

Tel 65 6846 1214 / Fax 65 6846 4641

www.microscan.com

© 2007 Microscan Systems, Inc.

P/N 83-210057 Rev A