QX Hawk Configuration Guide Qxhawkconfigguide
2016-07-13
: Microscan Qxhawkconfigguide qxhawkconfigguide center 30677 RecycleBin
Open the PDF directly: View PDF .
Page Count: 2
Copyright ©2015 Microscan Systems, Inc. P/N 83-217011 Rev F
Hardware Required
Pin Assignments
Standalone Configuration
Item Description Part Number
1QX Hawk Industrial Imager FIS-6801-XXXXG
2QX-1 Interface Device 98-000103-02
3QX Cordset, Common, M12 12-pin Socket to M12 12-pin Plug, 1 m 61-000162-02
4QX Cordset, Host, Serial, M12 12-pin Plug to DB9 Socket, 1 m 61-000152-02
5QX Cordset, Host, Serial, M12 12-pin Socket to DB9 Socket, 1 m 61-000153-02
6QX
Power Supply, 100-240VAC, +24VDC, M12 12-pin Socket
97-000012-01
7QX Cordset, Host, Ethernet, M12 8-pin Plug to RJ45, 1 m (Ultra-Lock or Screw-On) 61-000160-01 or -02
8QX Cordset, M12 12-pin Plug / M12 12-pin Socket to MS-Connect 210, RS-232 or RS-422, 2 m 61-000158-03 or -04
9QX Photo Sensor, M12 4-pin Plug, NPN, Dark On, 2 m 99-000020-02
Note: Additional cordsets available in the Microscan Product Pricing Catalog.
A is a serial M12 12-pin plug. It is the same for all models of the QX Hawk.
B is a serial M12 12-pin socket for serial models and an Ethernet M12 8-pin socket for Ethernet models.
Important: See the QX Hawk Industrial Imager User Manual for a list of the wire colors that correspond to each pin.
+10-28V
Trigger
Ground
Trigger/New Master / Input 1 Common
Ground
Output 3
Output 1
Output 2
New Master Default
Power
Input Common
Output Common
RS-232 (Host) RxD
Trigger
RS-232
(Host) TxD
QX-1 Interface
Device (Top View)
Input
Common
RS-422/485 RxD (–)
RS-232 TxD/
RS-232 RTS
Trigger
RS-232 RxD/
RS-232 CTS
Power
Ground
RS-422/485
RxD (+)
RS-422/485
TxD (+)
RS-422/485 TxD (–)
Input 1 Terminated
A (All Models) M12 12-pin Plug B (Serial) M12 12-pin Socket
QX-1 Trigger Connector (T) 4-pin Socket
Connector T on the QX-1
Interface Device is the
trigger connector.
Connectors 1, 2, and 3
can be used to bus power
and data as required by
the application.
TX (+)
RX (–)
RX (+)
TX (–)
Te r m i na t e d
Te r m i na t e d
B (Ethernet) M12 8-pin Socket
Te r m i n at e d
Terminated
P
T
QX Hawk
Industrial Imager
Configuration Guide
Ethernet with QX-1
Serial with QX-1 Serial with MS-Connect 210
11
1
22
33
5
66
99
8
7
Copyright ©2015 Microscan Systems, Inc.
QX Hawk Configuration
Daisy Chain Configuration
Multidrop Configuration
QX Hawk Accessories
QX Hawk Configurable Part Numbers
Kit, Adapter Plate, QX Hawk 98-000143-01
Kit, Right-Angle Mirror, QX Hawk 98-000144-01
Kit, Window Replacement, QX Hawk 98-000146-01
Kit, 12° Lens, QX Hawk 98-000147-04
Kit, 15° Lens, QX Hawk 98-000147-01
Kit, 30° Lens, QX Hawk 98-000147-02
Kit, 45° Lens, QX Hawk 98-000147-03
Kit, Glass Window with IR Coating, QX Hawk 98-000205-01
Kit, Glass Window, QX Hawk 98-000206-01
Kit, Lexan Window with Metal Bezel, QX Hawk 98-000206-02
Demo Kit, QX Hawk (camera not included) 98-000149-01
Kit, White LED Illumination, QX Hawk 98-000262-01
Kit, Blue LED Illumination, QX Hawk 98-000262-02
Microscan Tools Drive 37-000010-01
Note: Additional accessories are available in the Microscan Product Pricing Catalog.
QX Hawk part numbers follow the format FIS-6801-CLSG:
C (Comm) = 0 for RS-422, 1 for Ethernet;
L (Lens) = 0 for C-Mount, 2 for 30°, 3 for 45°, 4 for 12°; 5 for 15°;
S (Sensor) = 0 for SXGA CCD, 1 for WVGA CMOS;
G = RoHS-Compliant.
Important: Do not attempt to power more than four imagers with a single power supply in a daisy chain configuration. Add a
QX-1 and one power supply for every four additional imagers in the daisy chain.
Serial with QX-1 Ethernet with QX-1
111111
22
33
5
66
99
3333
7
Multidrop Network with MS-Connect 5100
1
1
1
222
333
66
999
333
www.microscan.com