Microsoft 1628 Wireless Display Adapter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2375047
Application ID	bdo3wvYXx3rLLRp3cgVjAw==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.62kB (320265 bits)
Date Submitted	2014-09-02 00:00:00
Date Available	2014-10-31 00:00:00
Creation Date	2014-01-09 15:33:44
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2014-02-12 10:35:36
Document Title	User Manual.pdf
Document Creator	Adobe InDesign CS6 (Macintosh)

surface.com/support
surface.com/userguides
PMS 10394C
;
Black
Š 2014 Microsoft Corporation
Set up
Black
Note: You can wirelessly connect your Surface or other Miracast™ enabled device
to a TV or monitor (available HDMI port and USB power required).
1. Connect your Surface Wireless Display Adapter to the HDMI and USB ports on the
side or back of your TV or monitor.
2. On the TV, set the channel to the HDMI source.
Cyan
Black
HDMI
USB
Note: Use the included HDMI cable if you need to extend the Surface Wireless
Display Adapter to fit your TV or monitor.
Pair the adapter to Surface
Black
3. On Surface, swipe in from the right edge of the screen, and tap Devices.
4. Tap Project > Add a wireless display.
5. Tap Surface Wireless Display Adapter in the list.
Connect Surface to your TV
Black
6. Enter the PIN shown on the TV or monitor. The same image should appear on
both screens.
Note:
• If the adapter didn’t connect, swipe in from the right edge of the screen, then
tap Devices > Project > Surface Wireless Display Adapter > Disconnect >
Connect.
Black
Download settings app
Black
•
F or adapter updates and additional settings, download Surface Wireless
Display Adapter from the Windows Store.
Notes:
• For best performance, keep Surface within 20 feet of the TV or monitor.
• The adapter must always be plugged into both the HDMI and USB ports.
The adapter is powered through the USB port.
Set up
Black
Note: You can wirelessly connect your Surface or other Miracast™ enabled device
to a TV or monitor (available HDMI port and USB power required).
1. Branchez l’adaptateur d’affichage sans fil Surface sur les ports HDMI et USB
situés sur le côté ou à l’arrière de votre téléviseur ou de votre moniteur.
2. On the TV, set the channel to the HDMI source.
Cyan
Black
HDMI
USB
Note: Use the included HDMI cable if you need to extend the Surface Wireless
Display Adapter to fit your TV or monitor.
Associer l’adaptateur à Surface
Black
3. Sur la tablette Surface, effectuez un balayage à partir du côté droit de l’écran et
appuyez sur PĂŠriphĂŠriques.
4. Appuyez sur Projection > Ajouter un ĂŠcran sans fil.
5. Appuyez sur Adaptateur d’affichage sans fil Surface à partir de la liste.
Connecter Surface Ă  votre tĂŠlĂŠviseur
Black
6. Saisissez le NIP affiché à l’écran du téléviseur. The same image should appear on
both screens.
Note:
• If the adapter didn’t connect, swipe in from the right edge of the screen, then
tap Devices > Project > Surface Wireless Display Adapter > Disconnect >
Connect.
Black
Télécharger l’application de paramètres
Black
•
 our obtenir des mises à jour et des paramètres supplÊmentaires pour
l’adaptateur, téléchargez l’application Adaptateur d’affichage sans fil Surface
Ă  partir du Windows Store.
Notes:
• For best performance, keep Surface within 20 feet of the TV or monitor.
• The adapter must always be plugged into both the HDMI and USB ports.
The adapter is powered through the USB port.
Set up
Black
Note: You can wirelessly connect your Surface or other Miracast™ enabled device
to a TV or monitor (available HDMI port and USB power required).
1. Conecta el adaptador inalĂĄmbrico Surface a los puertos HDMI y USB ubicados en
la parte lateral o posterior del televisor o monitor.
2. En el televisor, establece el canal en la fuente HDMI.
Cyan
Black
HDMI
USB
Note: Use the included HDMI cable if you need to extend the Surface Wireless
Display Adapter to fit your TV or monitor.
Conectar el adaptador a Surface
Black
3. En Surface, desliza el dedo rĂĄpidamente desde el borde derecho de la pantalla y
pulsa Dispositivos.
4. Pulsa Proyecto > Agregar una pantalla inalĂĄmbrica.
5. Pulsa Surface Wireless Display Adapter en la lista.
Connect Surface to your TV
Black
6. Escribe el cĂłdigo PIN que se muestra en el televisor. The same image should
appear on both screens.
Note:
• If the adapter didn’t connect, swipe in from the right edge of the screen, then
tap Devices > Project > Surface Wireless Display Adapter > Disconnect >
Connect.
Black
Descargar la aplicaciĂłn de configuraciĂłn
Black
•
 ara obtener actualizaciones del adaptador y configuraciones adicionales,
descarga el Surface Wireless Display Adapter desde la Tienda Windows.
Notes:
• For best performance, keep Surface within 20 feet of the TV or monitor.
• The adapter must always be plugged into both the HDMI and USB ports.
The adapter is powered through the USB port.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2014:01:09 15:33:44-08:00
Metadata Date                   : 2014:02:12 10:35:36+08:00
Modify Date                     : 2014:02:12 10:35:36+08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:a1a06eca-40eb-4918-a6e8-48cf4e24b01e
Original Document ID            : xmp.did:932DACFB21E4E211800CF910ACCFD609
Document ID                     : xmp.id:00801174072068118A6D9DBE6C9AAE38
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:FF7F1174072068118A6D9DBE6C9AAE38
Derived From Document ID        : xmp.did:F77F1174072068118C14F255B9655C5A
Derived From Original Document ID: xmp.did:932DACFB21E4E211800CF910ACCFD609
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2014:01:09 15:33:44-08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 19
Creator                         : Adobe InDesign CS6 (Macintosh)

EXIF Metadata provided by EXIF.tools