Microsoft 1YH Bluetooth Headset User Manual HS 79W en1 draft2

Microsoft Mobile Oy Bluetooth Headset HS 79W en1 draft2

Contents

Manual 2

Nokia Bluetooth Headset BH-303???????/1HS-79W_en1_draft2.fm Page 1 Monday, November 13, 2006 4:31 PM
ENGLISHDECLARATION OF CONFORMITYHereby, NOKIA CORPORATION declares that this HS-79W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/.The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. Do not dispose of these products as unsorted municipal waste. For more information, see product Eco-Declaration or country specific information at www.nokia.com.© 2007 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Bluetooth is a registered trademark of Bluetooth SIG, Inc.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.0434HS-79W_en1_draft2.fm Page 2 Monday, November 13, 2006 4:31 PM
ENGLISHThe availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.Unauthorized changes or modifications to this device may void the user's authority to operate the equipment.Export ControlsThis device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.IntroductionThe Nokia Bluetooth Headset BH-303 allows you to make and receive calls while on the move. You can use the headset with compatible phones that support Bluetooth wireless technology.Read this user guide carefully before using the headset. Also read the user guide for your phone, which provides important safety and maintenance information. Keep the headset out of reach of small children.Bluetooth wireless technologyBluetooth wireless technology allows you to connect compatible devices without cables. The phone and the headset do not need to be in line of sight, but they should be within 10 meters (30 feet) of each other. Connections may be subject to interference from obstructions, such as walls, or other electronic devices.The headset complies with the Bluetooth Specification 2.0 + EDR that supports the Headset Profile 1.1 and Hands-Free Profile 1.5. Check with the manufacturers of other HS-79W_en1_draft2.fm Page 3 Monday, November 13, 2006 4:31 PM
ENGLISHdevices to determine their compatibility with this device.There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.Get startedThe headset contains the following parts shown on the title page: indicator light (1), power key (2), volume key (3), microphone (4), charger connector (5), answer/end key (6), and earloop (7).Before using the headset, you must charge the battery and pair the headset with a compatible phone.Parts of the headset are magnetic. Metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased.ChargersCheck the model number of any charger before using it with this device. The headset is intended for use with the AC-3, AC-4, and DC-4 chargers.Warning: Use only chargers approved by Nokia for use with this particular enhancement. The use of any other types may invalidate any approval or warranty and may be dangerous.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.HS-79W_en1_draft2.fm Page 4 Monday, November 13, 2006 4:31 PM
ENGLISHCharge the batteryThe headset has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device, as you may damage the device.1. Connect the charger to a wall outlet. 2. Connect the charger cable to the charger connector. The red indicator light is on while charging. It may take a while before charging starts. If charging does not start, disconnect the charger, plug it in again, and retry. Charging the battery fully may take up to 1 hour and 30 minutes.3. When the battery is fully charged, the indicator light turns to green. Disconnect the charger from the headset and the wall outlet.The fully charged battery has power for up to 6 hours and 30 minutes of talk-time or up to 150 hours of standby time. However, the talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments.When battery power falls low, the headset beeps and the red indicator light starts to flash.Switch the headset on or offTo switch on, press and hold the power key until the headset beeps and the green indicator light is displayed.To switch off, press and hold the power key until the headset beeps and the red indicator light is displayed briefly.Pair the headset1. Ensure that your phone is switched on and the headset is switched off.HS-79W_en1_draft2.fm Page 5 Monday, November 13, 2006 4:31 PM
ENGLISH2. Press and hold the power key until the green indicator light starts to flash quickly.3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices.4. Select the headset from the list of found devices.5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. You only need to pair the headset with your phone once.If the pairing is successful, the headset beeps and appears in the phone menu where you can view the currently paired Bluetooth devices. The headset is now ready for use.Basic usePlace the headset on the earTo use the headset without the earloop, detach it (8), and plug the earpiece into your ear.To use the headset with the earloop, place the earloop around your ear (9), rotate the earloop for the best fit, and point the headset toward your mouth. If you wear an earring, ensure that it is not accidentally attached to the earloop.To attach the carrying strap, plug the clip at the end of the strap to the headset (10).Call handlingTo make a call, use your phone in the normal way when the headset is connected to your phone.HS-79W_en1_draft2.fm Page 6 Monday, November 13, 2006 4:31 PM
ENGLISHIf your phone supports last number redialing with the headset, press the answer/end key twice while no call is in progress.If your phone supports voice dialing with the headset, press and hold the answer/end key when no call in progress, and proceed as described in the user guide of your phone.To answer or end a call, press the answer/end key. To reject an incoming call, press the answer/end key twice.To adjust the headset volume, press the volume key up or down. To mute or unmute the microphone, press the middle of the volume key.To switch the call between the headset and a compatible phone, press and hold the answer/end key.Clear settings or resetTo clear all the pairing settings from the headset, switch off the headset, and press and hold the power key and the answer/end key until the red and green indicator lights start to alternate.To reset the headset if it stops functioning, although it is charged, plug the headset into a charger, and press the power key and the answer/end key at the same time.Battery informationYour device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device.Unplug the charger from the electrical plug and the device when not in use. Do HS-79W_en1_draft2.fm Page 7 Monday, November 13, 2006 4:31 PM
ENGLISHnot leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.Never use any charger that is damaged.Leaving the device in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverage.• Keep all accessories and enhancements out of the reach of small children.• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.HS-79W_en1_draft2.fm Page 8 Monday, November 13, 2006 4:31 PM
ENGLISH• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.FCC/IndustryCanada noticeThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference; and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause HS-79W_en1_draft2.fm Page 9 Monday, November 13, 2006 4:31 PM
ENGLISHharmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: Changes or modifications not expressly approved by Nokia could void the user's authority to operate the equipment.HS-79W_en1_draft2.fm Page 10 Monday, November 13, 2006 4:31 PM

Navigation menu