Microsoft HF-22 Bluetooth Car Kit User Manual CK 100 QUG with FCC IC en1
Microsoft Mobile Oy Bluetooth Car Kit CK 100 QUG with FCC IC en1
Contents
- 1. Manual 1
- 2. Manual 2
Manual 1
CK-100_QUG_with_FCC&IC_en1.fm Page 1 Wednesday, April 30, 2008 12:26 PM Nokia Car Kit CK-100 9210123/1 CK-100_QUG_with_FCC&IC_en1.fm Page 2 Wednesday, April 30, 2008 12:26 PM ENGLISH Š 2008 Nokia. All rights reserved. Nokia, Nokia Connecting People, Navi and the Nokia Original Accessories logo are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Export controls This device may contain commodities, technology or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited. For your safety Read these simple guidelines. Not following them may be dangerous or illegal. This product may contain small parts. Keep them out of the reach of small children. SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety. INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance. CK-100_QUG_with_FCC&IC_en1.fm Page 3 Wednesday, April 30, 2008 12:26 PM ENGLISH SWITCH OFF IN RESTRICTED AREAS Follow any restrictions. Switch the device off near fuel, chemicals, or blasting areas. QUALIFIED SERVICE Only qualified personnel may install or repair this product. ENHANCEMENTS Use only approved enhancements. Do not connect incompatible products. Introduction This quick user guide describes the basic features of the car kit. Read carefully the complete user and installation guide on the CD that is supplied with the car kit. It contains, for example, troubleshooting tips and important safety and maintenance information. Have the car kit installed by a qualified service technician. To use the car kit, you must pair and connect it with your compatible device using Bluetooth wireless technology. See the user and installation guide for details. Read the user and installation guide To view the user and installation guide, you need a PC that has the Windows XP or Vista operating system and a compatible CD or DVD drive. You also need to have the Adobe Reader application on the PC. Place the CD in the drive on your PC. Wait until the installation program starts automatically (if the CD-ROM CK-100_QUG_with_FCC&IC_en1.fm Page 4 Wednesday, April 30, 2008 12:26 PM ENGLISH autorun feature is enabled in Windows). Select your language and the user and installation guide. Get started Input device You can operate the car kit using the input device CU-11 shown at the start of this guide. The device is provided with the NaviTM wheel that you can turn or press. Turn the wheel to adjust the volume when you are using the mobile phone or music device connected to the car kit. Press the wheel for other tasks, for example, to handle calls. If the ignition sense wire is not connected, press and hold the Navi wheel for about 2 seconds. Alternatively, turn on the ignition, start driving, and wait until the builtin motion sensor switches the car kit on automatically. Switch off If the ignition sense wire is connected, turn off the car ignition. If the ignition sense wire is not connected and you are not using your phone connected to the car kit for Switch on calling, close the Bluetooth If the ignition sense wire is connected, connection to your phone and music turn on the car ignition. device. CK-100_QUG_with_FCC&IC_en1.fm Page 5 Wednesday, April 30, 2008 12:26 PM ENGLISH After you turn off the car ignition, do not leave your mobile phone or music device connected to the car kit to prevent accidental draining of the car battery. Operation Calls To make a call, use your mobile phone in the normal way when the car kit is connected to it. To redial the number you last called (if your phone supports this feature with the car kit), press the Navi wheel twice when no call is in progress. To activate voice dialling (if your phone supports this feature with the car kit), press and hold the Navi wheel for about 2 seconds when no call is in progress, and proceed as described in the user guide of your phone. To answer or end a call, press the Navi wheel. To reject a call, press and hold the Navi wheel for about 2 seconds. To switch an active call between the car kit and your compatible phone, press and hold the Navi wheel for about 2 seconds. Adjust volume To adjust the volume when you use the mobile phone or music device connected to the car kit, turn the Navi wheel to left or right. CK-100_QUG_with_FCC&IC_en1.fm Page 6 Wednesday, April 30, 2008 12:26 PM ENGLISH FCC/Industry Canada notice NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: Changes or modifications not expressly approved by Nokia could void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2008:04:30 12:27:12+03:00 Modify Date : 2008:04:30 12:27:12+03:00 Page Count : 6 Creation Date : 2008:04:30 09:27:12Z Mod Date : 2008:04:30 09:27:12Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : rjp Metadata Date : 2008:04:30 09:27:12Z Creator : rjp Title : CK-100_QUG_with_FCC&IC_en1.fmEXIF Metadata provided by EXIF.tools