Microsoft HS-13W Wireless Image Headset User Manual hs 13w en1 draft2

Microsoft Mobile Oy Wireless Image Headset hs 13w en1 draft2

UserManual.wiki >

HS 13W User Manual

users manual

User Guide for Nokia Wireless Image Headset HS-13Whs-13w_en1_draft2.fm Page 1 Thursday, August 5, 2004 7:25 AM

9311901Issue 1DECLARATION OF CONFORMITYWe, NOKIA CORPORATION declare under our sole responsibility that the product HS-13W is in conformity with the provisions of the following Council Directive: 1999/5/EC.A copy of the Declaration of Conformity can be found from http://www.nokia.com/phones/declaration_of_conformity/.Copyright © 2004 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia and Nokia Connecting People are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Bluetooth is a registered trademark of Bluetooth SIG, Inc.Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.9311901 / Issue 1hs-13w_en1_draft2.fm Page 2 Thursday, August 5, 2004 7:25 AM

Contents3ContentsIntroduction ............................. 5Bluetooth wireless technology .......... 5Bluetooth passcode............................... 61. Overview............................... 7Nokia Wireless Image Headset parts 7Standby and image modes.................. 8Essential indicatorsin standby mode................................. 92. Getting started................... 10Charging the battery .......................... 10Switching Nokia Wireless ImageHeadset on and off.............................. 11Switching Nokia Wireless ImageHeadset on for the first time ........ 113. Call functions..................... 13Making a call ........................................ 13Making a conference call............... 14Answering or rejectingan incoming call .................................. 15Call waiting........................................ 15Options during a call .......................... 164. Using the menu.................. 17Accessing a menu function............... 17Using the text editor........................... 18List of menu functions ...................... 205. Menu functions.................. 22Call register .......................................... 22Recent calls lists .............................. 22Call duration ..................................... 23Phone book ........................................... 23Selecting the phone book view ... 24Saving names andphone numbers ................................ 24Editing a name or a number......... 25Deleting names and numbers ...... 25Copying names and numbersfrom the phone’s phone book...... 26Sending and receivinga business card................................. 27Gallery.................................................... 28Images and text files...................... 28Image shows ..................................... 30Receiving and storingnew images ....................................... 32Settings.................................................. 33Bluetooth connections................... 33Time and date settings................... 35Summary after call ......................... 36Language............................................ 36Automatic keyguard ....................... 36Help text activation........................ 37hs-13w_en1_draft2.fm Page 3 Thursday, August 5, 2004 7:25 AM

4Display settings................................ 37Tone settings..................................... 39Voice dial settings........................... 40Device settings ................................. 41Download application push.......... 41Restoring factory settings............. 41Keyguard................................................ 426. Battery information ........... 43Charging and Discharging ................ 43hs-13w_en1_draft2.fm Page 4 Thursday, August 5, 2004 7:25 AM

Introduction6the manufacturers of other devices to determine their compatibility with this device.There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.■Bluetooth passcodeYou need a Bluetooth passcode for pairing Nokia Wireless Image Headset with compatible devices. The passcode is 0000, and you cannot change it.In addition, you can use the passcode to protect Nokia Wireless Image Headset against unauthorised use.hs-13w_en1_draft2.fm Page 6 Thursday, August 5, 2004 7:25 AM

Overview71. Overview■Nokia Wireless Image Headset partsNokia Wireless Image Headset has the following parts and keys:##add picture1. Display2. Clip3. Strap connectors4. Microphone##top right corner5. Buzzer##bottom6. Earpiece7. Power key ##top left sideNote that a short press of the power key turns the display lights on and allows you to turn the audio tones on or off.8. Joystick ##up, ##down, ##left and ##right, ##middleIn standby mode, ##up and #down function as shortcuts to the phone book.The function of ##left and ##right depends on the guiding text shown on the display, for example, Menu and VoiceDial in standby mode.##middle has the same function as ##left, except when inserting data (see page 18).hs-13w_en1_draft2.fm Page 7 Thursday, August 5, 2004 7:25 AM

Overview89. Charger cover ##top right side■Standby and image modesNokia Wireless Image Headset is in standby mode, when it is ready for use and you have not entered the menu.##add picture1. Signal strength of the cellular network at your current location. The higher the bar, the stronger the signal.With certain phones, the signal strength cannot be displayed. In that case, the ##icon shows whether there is a signal without defining the signal strength.2. Battery charge indicator. The higher the bar, the more power in the battery.3. The left selection key in standby mode is Menu.4. The right selection key in standby mode is VoiceDial.Nokia Wireless Image Headset automatically activates the image mode when it has been in the standby mode for 30 seconds, or when the keyguard is activated. See Keyguard on page 42.Note that the image mode is activated only if the Image mode is enabled, see Image mode on page 38.In the image mode, Nokia Wireless Image Headset displays a single image or a image show stored in Nokia Wireless Image Headset. To define the images displayed in the image mode, see Image mode on page 38.Press the joystick to exit the image mode.hs-13w_en1_draft2.fm Page 8 Thursday, August 5, 2004 7:25 AM

Overview9Essential indicators in standby modeYou have missed one or several calls. See Recent calls lists on page 22.The keypad is locked. See Keyguard on page 42.##The connection using Bluetooth wireless technology is activated or disactivated. See Bluetooth connections on page 33.hs-13w_en1_draft2.fm Page 9 Thursday, August 5, 2004 7:25 AM

Getting started102. Getting started■Charging the batteryCheck the model number of any charger before use with this device. This device is intended for use when supplied with power from Nokia ACP-12, ACP-8 and LCH-12 chargers.Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.For availability of approved accessories, please check with your dealer.When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.Your device and its enhancements may contain small parts. Keep them out of reach of small children. 1. ##add picture##Open the charger cover and connect the lead from the charger to the charger connector.2. Connect the charger to an AC wall socket.The text Charging is displayed briefly if Nokia Wireless Image Headset is switched on. The battery charge indicator scrolls on the display until the battery is full. If the battery is completely flat, it may take a few minutes before the indicator appears on the display.hs-13w_en1_draft2.fm Page 10 Thursday, August 5, 2004 7:25 AM

Getting started11You can use Nokia Wireless Image Headset while the charger is connected.■Switching Nokia Wireless Image Headset on and offPress and hold the power key.Note that Bluetooth wireless technology is activated by default when Nokia Wireless Image Headset is turned on.Warning: Do not switch the phonedevice on when wireless phone use is prohibited or when it may cause interference or danger.Switching Nokia Wireless Image Headset on for the first timeWhen you switch Nokia Wireless Image Headset on for the first time, you have to pair it with your phone. The pairing with your phone is important, because in the future, each time you switch Nokia Wireless Image Headset on, it will automatically attempt to connect to the first device with which you have paired it.Create a connection from your phone to Nokia Wireless Image Headset using Bluetooth wireless technology. Follow the instructions in your phone’s user guide. Your Nokia Wireless Image Headset’s passcode is 0000.If the phone does not have the application needed to download (copy) the phone book from the connected phone to Nokia Wireless Image Headset, hs-13w_en1_draft2.fm Page 11 Thursday, August 5, 2004 7:25 AM

Getting started12the device automatically attempts to push it to the phone the first time you connect the phone to Nokia Wireless Image Headset. When the phone displays the Push phonebook download application to connected phone? query, start the push by pressing Yes.If you want to push the application to the phone later, press No. To push the application to the phone later, see Download application push on page 41.hs-13w_en1_draft2.fm Page 12 Thursday, August 5, 2004 7:25 AM

Call functions133. Call functions■Making a callYou can make a call using voice dialling, or the numbers stored in the phone book or call register.During a call, press ##up to increase and ##down to decrease the volume of the call.Making a call using the phone book•Press Menu and select Phone book and Names (or press ##down in the standby mode). Scroll to the name or number you want, press Options and select Call.Making a call using the call register•Press Menu and select Call register and Missed calls, Received calls or Dialled numbers. Scroll to the name or number you want, press Options and select Call.The call register contains the last 10 missed and last 10 received calls, and the last 20 numbers you have called, see Call register on page 22.Making a call using voice dialling•Press VoiceDial. When Nokia Wireless Image Headset displays the Speak now notification and sounds a tone, speak the name of the person you want to call. Nokia Wireless Image Headset plays a voice tag of the name, displays the name and the default number on the display and automatically makes the call after a short delay.hs-13w_en1_draft2.fm Page 13 Thursday, August 5, 2004 7:25 AM

Call functions14During the delay, you can cancel the call (press Cancel) or change the number or person you are calling. If the displayed name is correct, but you want to call a different number (for example the home number instead of the mobile), scroll up or down to select the correct number. If the displayed name is wrong, press Change and select the correct name from a list of similar sounding names.Since Nokia Wireless Image Headset automatically generates a voice tag each time a name is stored in the phone book, you do not need to separately record the voice tags.Note that you can use voice dialling only if the name of the person you want to call is in Nokia Wireless Image Headset’s phone book. Note also that Nokia Wireless Image Headset plays the voice tag only if the voice tag playback is on, see Voice dial settings on page 40.Ending a call•Press End call to end the call or to cancel the call attempt.Note that the End call option may not always be available as a selection key, for example when the call is muted. In that case, press Options and select End call to end the call.Making a conference callConference calling is a network service that allows up to six persons to take part in a conference call.1. Make a call to the first participant. hs-13w_en1_draft2.fm Page 14 Thursday, August 5, 2004 7:25 AM

Call functions152. Make a call to the second participant by pressing Options and selecting New call. The first call is automatically put on hold.3. When the new call has been answered, join the first participant in the conference call. Press Options and select Conference.4. To add a new participant to the call, repeat steps 2 to 3.5. To end the conference call, press Options and select End call.■Answering or rejecting an incoming callPress Answer to answer or Reject to reject the incoming call.Note that the Answer and Reject options may not always be available, for example if you are in the middle of another call. In that case, press Options and select Answer or Reject.Note that when somebody is calling you, Nokia Wireless Image Headset shows the caller’s name, phone number or the text Private number or Call. If more than one name is found in the phone book with the same phone number as the caller’s number, only the phone number will be displayed, if this is available.Call waitingDuring a call, press Answer, or press Options and select Answer to answer the waiting call. The first call is put on hold. Press Options and select End call to end the active call.hs-13w_en1_draft2.fm Page 15 Thursday, August 5, 2004 7:25 AM

Call functions16Note that the Call waiting function must be activated before you can use it. You can activate the function from the phone. For more information, see the phone’s user guide.■Options during a callMany of the options that you can use during a call, are network services. Press Options during a call for some of the following options:Hold or Unhold, Handset or Headset, End call, End all calls, Conference, New call, Menu, Mute or Unmute, Reject and Answer.Save to save the phone number of the on-going call to the phone book, Add to name to save the phone number of the on-going call to the phone book under an existing name.Swap to switch between the active call and the call on hold, Transfer to connect a call on hold to an active call, and disconnect yourself from the calls.hs-13w_en1_draft2.fm Page 16 Thursday, August 5, 2004 7:25 AM

Using the menu174. Using the menuNokia Wireless Image Headset offers you an extensive range of functions which are grouped in menus. Most of the menu functions are provided with a brief help text. To view the help text, scroll to the menu function you want and wait for 14 seconds. To exit the help text, press Back. See Help text activation on page 37.■Accessing a menu function1. To access the menu, press Menu.2. Scroll with or through the menu and select, for example, Settings by pressing Select.3. If the menu contains submenus, select the one you want, for example Display settings.4. If the selected submenu contains further submenus, repeat step 3. Select the next submenu, for example Wallpaper.5. Select the setting of your choice.6. Press Back to return to the previous menu level, and Exit to exit the menu.Note that pressing and holding Back exits the menu regardless of your present menu location.hs-13w_en1_draft2.fm Page 17 Thursday, August 5, 2004 7:25 AM

Using the menu18■Using the text editorWhen you have to insert data to Nokia Wireless Image Headset, it displays a text editor. The main parts of the text editor screen are:##add picture##1. Prompt zonedisplays the objective of the screen.2. Editor zonedisplays the text you have entered.3. Character zonedisplays all the characters you can select from. The content of the list varies. For example, if you are inserting a number, only numbers are available in the character zone.4. Command zonedisplays all the available actions you can take.Press ##up or ##down to move between the zones. Press ##left or ##right to move within one zone.To insert data:1. Select the editing mode, for example ##:1. Press ##up or ##down to access the command zone and then press ##left or ##right until ##ChangeMode is highlighted.2. Press ##middle to select the command.hs-13w_en1_draft2.fm Page 18 Thursday, August 5, 2004 7:25 AM

Using the menu193. Press ##left or ##right in the command zone until the mode you want is highlighted.4. Press ##middle to select the mode.2. Insert the first character:Press ##up to access the character zone and then press ##left or ##right until the correct character is highlighted. Press ##middle to select it.The selected character is added to the editor zone.3. Repeat step 2 until you have inserted all the text you want.4. To save the data, select ##Options in the command zone, press ##middle, select ##Save and press ##middle again.To exit the editor without saving, select ##Back in the command zone and press ##middle. If there is no ##Back command, select ##Options, press ##middle, select ##Exit editor and press ##middle again.hs-13w_en1_draft2.fm Page 19 Thursday, August 5, 2004 7:25 AM

Using the menu20■List of menu functions1. Call register1. Dialled numbers2. Missed calls3. Received calls4. Delete recent call lists5. Call duration1. Last call duration2. Received calls’ duration3. Dialled calls’ duration4. All calls’ duration5. Clear timers2. Phone book1. Names2. Add name3. Edit name4. Delete5. Copy from phone6. Add number7. Phonebook view3. Gallery1. Images2. Texts3. Image shows1. Show all images2. Show all texts3. My Show14. My Show25. Digital clock6. Analog clock4. Settings1. Bluetooth1. Bluetooth2. Search for devices3. View active device4. View paired devices5. Bluetooth settings2. Time and date settings1. Clock2. Date3. Summary after call4. Language5. Automatic keyguard6. Help text activation7. Display settings1. Wallpaper2. Image mode3. Colour schemes4. Display brightness5. Lights8. Tone settingshs-13w_en1_draft2.fm Page 20 Thursday, August 5, 2004 7:25 AM

Using the menu211. Buzzer audio2. Incoming call alert3. Ringing tone4. Ringing volume5. Keypad tones6. Warning tones9. Voice dial settings1. Voice dial language2. Repeat dialled name3. Reset voice dial settings10.Device settings1. Phone book memory status2. Gallery status11.Update phone12.Restore factory settings5. Keyguardhs-13w_en1_draft2.fm Page 21 Thursday, August 5, 2004 7:25 AM

Menu functions225. Menu functions■Call registerNokia Wireless Image Headset registers the phone numbers and the approximate length of the calls that have been missed, received or dialled using Nokia Wireless Image Headset. In addition, the call register contains the calls that have been missed or received using the connected phone.Nokia Wireless Image Headset registers missed and received calls only if the network supports these functions, Nokia Wireless Image Headset and phone are switched on and within the network’s service area, and the Bluetooth connection between the phone and Nokia Wireless Image Headset is active.When you press Options in the Missed calls, Received calls and Dialled numbers menu, you can, for example, view the date and the time of the call, edit or delete the phone number from the list, or save the number in the phone book.Recent calls listsPress Menu, and select Call register and then select•Missed calls to view the list of the last ten phone numbers from which somebody has tried to call you (network service).hs-13w_en1_draft2.fm Page 22 Thursday, August 5, 2004 7:25 AM

Menu functions23Tip: When a note about missed calls is being displayed, press List to access the list of phone numbers. Scroll to the number you would like to call back, press Options and select Call.•Received calls to view the list of the last ten phone numbers from which you have accepted or rejected calls (network service).•Dialled numbers to view the list of the last 20 phone numbers that you have called or attempted to call.•Delete recent call lists to delete the recent calls lists. Select whether you want to delete all the phone numbers in the recent call lists, or only those numbers in the missed calls, received calls or dialled numbers lists. You cannot undo the operation.Call durationPress Menu, and select Call register and Call duration.Scroll to view the approximate duration of your incoming and outgoing calls in hours, minutes and seconds. To clear the timers, the Bluetooth passcode is needed, see Bluetooth passcode on page 6.■Phone bookYou can save names and phone numbers in the phone book in Nokia Wireless Image Headset’s memory.The phone book may save 250 names with at the most 2 numbers for each name.hs-13w_en1_draft2.fm Page 23 Thursday, August 5, 2004 7:25 AM

Menu functions24You can access the phone book by pressing Menu, and selecting Phone book, or by pressing ##up.Selecting the phone book viewPress Menu, and select Phone book and Phone book view to select how the names (and numbers) in the phone book are displayed.Saving names and phone numbers1. Press Menu, and select Phone book and Add name.2. Key in the name and press OK. To key in the letters, see Using the text editor on page 18.3. Key in the phone number, and press OK. To key in the numbers, see Using the text editor on page 18.4. When the name and number are saved, press Done.Nokia Wireless Image Headset automatically creates a voice tag for the new name.Saving multiple numbers per nameYou can save two different types of phone numbers per name in the phone book.The first number saved is automatically set as the default number and it is indicated with a frame around the icon (for example, for the home number, ). When you select a name from the phone book, for example to make a call, the default number is used unless you select another number.hs-13w_en1_draft2.fm Page 24 Thursday, August 5, 2004 7:25 AM

Menu functions25To change the default number, press Menu, and select Phone book and Names. Scroll to the name you want, press Options and select View details. Scroll to the number you want to set as the default number. Press Options, and select Set as default.1. Press Menu, and select Phone book and Add number.2. Scroll to the name to which you want to add a new number, and press Add.3. Select one of the following number types: General, Mobile, Home or Office.4. Key in the number and press OK to save it. To key in the number, see Using the text editor on page 18.5. Press Back and then Exit to return to standby mode.Editing a name or a numberPress Menu, and select Phone book and Names (or press ##down in the standby mode). Scroll to the entry you want to edit, press Options and select Edit name or Edit number. Edit the name or number and press OK. To key in letters or numbers, see Using the text editor on page 18.You can also edit the names by pressing Menu, and selecting Phone book and Edit name. Scroll to the phone book entry you want to edit and press Edit.Deleting names and numbersPress Menu, and select Phone book and Delete.hs-13w_en1_draft2.fm Page 25 Thursday, August 5, 2004 7:25 AM

Menu functions26• To delete names and numbers one by one, select One by one and scroll to the name (and number) you want to delete. Press Delete and OK to confirm.• To delete names and numbers in the phone book all at once, select Delete all. Confirm the deletion and give the Bluetooth passcode, see Bluetooth passcode on page 6.Copying names and numbers from the phone’s phone bookYou can copy names and phone numbers to Nokia Wireless Image Headset from the phone to which it is connected. You can copy either the whole phone book or only selected names and numbers.The name and the first two phone numbers are copied. All text items and additional phone numbers are ignored.If your phone does not support FTP or have the Phonet download application, Nokia Wireless Image Headset has to push the download application to the phone to enable you to copy the phone book. If you have not pushed the download application to the phone when you first connected Nokia Wireless Image Headset to it, see Download application push on page 41.1. Press Menu, and select Phone book and Copy from phone.Note that if Nokia Wireless Image Headset is not connected to a phone or the phone does not support this function, the Copy from phone menu is grey and you cannot select it.hs-13w_en1_draft2.fm Page 26 Thursday, August 5, 2004 7:25 AM

Menu functions272. Select the source memory from which you want to copy: phone’s internal memory (Phone) or the SIM card memory (SIM card).3. Select All entries, Selected entries.If the phone does not support the Selected entries function, that menu item is grey and you cannot select it.If you select Selected entries, Nokia Wireless Image Headset displays the list of all names in the source memory. Scroll through the list and mark all the entries you want to copy by pressing Mark. You can delete a selection by pressing Unmark. When finished, press Done.4. Press OK to start copying. During the copying process, you can stop it by pressing Quit.When the copying is finished Nokia Wireless Image Headset display shows how many entries were copied and how many were not. Press Back to exit the screen. Nokia Wireless Image Headset automatically creates voice tags for all the copied names.Note: If the same name exists both in Nokia Wireless Image Headset and in the source memory, the entry in Nokia Wireless Image Headset is overwritten during the copying process.Sending and receiving a business cardYou can send and receive a person’s contact information (business card) using Bluetooth wireless technology.Receiving a business cardhs-13w_en1_draft2.fm Page 27 Thursday, August 5, 2004 7:25 AM

Menu functions281. When you have received a business card to Nokia Wireless Image Headset, a notification is displayed.2. To view the business card, press Show.To discard the business card, press Exit and OK.3. Press Save to save the business card in Nokia Wireless Image Headset’s phone book.Sending a business card1. Search for the name and phone number you want to send from the phone book, press Options and select Send bus. card.2. Nokia Wireless Image Headset searches for compatible devices and displays them as a list. Select the device to which you want to send the business card.■GalleryYou can save images, image shows and text items in the folders of the Gallery.Images and text files1. Press Menu and select Gallery.2. Select Images or Texts and press Open.The list of files in the selected folder is shown.3. Scroll to the desired file. Press Options and some of the following options are available:hs-13w_en1_draft2.fm Page 28 Thursday, August 5, 2004 7:25 AM

Menu functions29•Open to open the selected file.•Delete to delete the selected file.•Send/Send many (only visible in the Images folder) to send one or several images files to a compatible device using Bluetooth wireless technology. Nokia Wireless Image Headset searches for compatible devices and displays them as a list. Select the device to which you want to send the file(s).If you select Send many, you have to select the images to send. Scroll through the list and mark all the images you want to send by pressing Mark. You can delete a selection by pressing Unmark. When finished, press Send.•Add (only visible in the Texts folder) to create a new text file (maximum length: 160 characters). To key in letters, see Using the text editor on page 18.•Edit (only visible for text files) to edit an existing text file. To key in letters, see Using the text editor on page 18.•Move to change the file order in the folder. In the image shows, the images are displayed in the same order as the image files are listed in the folder.Scroll to the place where you want to move the file and press OK. The file is moved above the cursor position. Press Done.•Rename (only visible in the Images folder) to give a new name to the file.hs-13w_en1_draft2.fm Page 29 Thursday, August 5, 2004 7:25 AM

Menu functions30•Set as wallpaper to have the selected file displayed as wallpaper in standby mode.•Set as image mode to have the selected file displayed in image mode.•Set orientation to set whether the image show is shown to you (1) or to other people (2)##picture.•Change font size (only visible in the Texts folder) to change the font size in the text files.•Details to see the details of the file, for example the name of the file.•Sort (only visible in the Images folder) to sort the files and folders by name, date or size.Image showsNokia Wireless Image Headset contains 4 preset image shows and 2 image shows you can modify:•Show all images shows all the images stored in the Images folder.•Show all texts shows all the text files stored in the Texts folder.•My Show1 and My Show2 are user-definable image shows and you can modify their contents.•Digital clock shows a digital clock with current time.•Analog clock shows an analog clock with current time.hs-13w_en1_draft2.fm Page 30 Thursday, August 5, 2004 7:25 AM

Menu functions31Viewing and managing image shows:1. Press Menu, select Gallery and Image shows and press Open.2. Scroll to the desired image show. Press View to view the image show.Use ##up and ##down to scroll to the next/previous image. Press either selection key to stop the image show.Press Options for some of the following options:•Open to open a list of image show files.•Select images to add new images to a user-definable image show. Scroll through the list and mark all the images you want to add by pressing Mark. You can delete a selection by pressing Unmark. When finished, press Done.•Select texts to add new text files to a user-definable image show. Scroll through the list and mark all the text files you want to add by pressing Mark. You can delete a selection by pressing Unmark. When finished, press Done.•View in sequence to view the image show.•Clear to delete all the images in a user-definable image show.•Set as image mode to have the selected image show displayed in image mode.•Set file change time to define the timeout for each file in the image show (when the next file is displayed). Select one of the predefined timeouts or Other. If you select Other, key in the timeout you want. To key in the numbers, see Using the text editor on page 18.hs-13w_en1_draft2.fm Page 31 Thursday, August 5, 2004 7:25 AM

Menu functions32•Set orientation to set whether the image show is shown to you (1) or to other people (2)##picture.Receiving and storing new imagesYou can receive new images from compatible devices using Bluetooth wireless technology, and save the received images to the Gallery.1. When you receive a file/files to Nokia Wireless Image Headset, a notification is displayed.2. To view the list of received files, press Show.If you want to delete the files without viewing them, press Exit and OK to confirm.3. Scroll to the desired file. Press Options for the following options:•Save to save the received file.Accept the original name or define a new name for the file and press OK. Select the folder where you want to store the file.•Open/Delete to open/delete the received file.•Details to see the details of the received file.hs-13w_en1_draft2.fm Page 32 Thursday, August 5, 2004 7:25 AM

Menu functions33■SettingsBluetooth connectionsFeatures using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduces the battery life. You can use Bluetooth wireless technology to connect Nokia Wireless Image Headset to other compatible devices. Through the connection, you can send and receive images and business cards.Before you can create a connection to a compatible device, you have to pair the device with your Nokia Wireless Image Headset. If required by the device, you have to give the device’s passcode to enable pairing. You can store at the most 10 pairings at the time to your Nokia Wireless Image Headset. When you attempt to connect to a device with which you are already paired, no passcode is required.Note that you can have one active audio and one active data connection at a time. For example, you can at the same time have an audio connection to your phone and form a data connection to your friend’s Nokia Wireless Image Headset to send an image. However, if you want to forward thast image to another friend’s Nokia Wireless Image Headset, you have to disconnect the connection to your first friend’s device before you can activate a connection to your other friend’s device.When you turn Nokia Wireless Image Headset on, it automatically attempts to connect to the default device (the first device Nokia Wireless Image Headset was connected to when it was taken to use for the first hs-13w_en1_draft2.fm Page 33 Thursday, August 5, 2004 7:25 AM

Menu functions34time). If Nokia Wireless Image Headset does not find the default device or the default device rejects the connection, it attempts to connect to the last device it has been connected to.Press Menu, and select Settings, Bluetooth and•Bluetooth to turn the Bluetooth technology function on or off.Note that the function is automatically on when you switch the device on. Even if you turn the function off, it is automatically turned on to transfer images or business cards. The module must be on in case you want to establish a connection from an external device to Nokia Wireless Image Headset.•Search for devices to search for compatible devices and connect to them. Nokia Wireless Image Headset lists the found devices on the display. When you see the device you want, you can stop the search by pressing Stop. Select the device you want.If the device has not been previously paired with Nokia Wireless Image Headset and it requires a passcode, Nokia Wireless Image Headset requests it. Enter the passcode for the device to activate the connection. To key in the numbers, see Using the text editor on page 18.•View active device to view information about the device to which Nokia Wireless Image Headset is currently connected. To disconnect the connection, press Disconnect.•View paired devices to view the list of devices that have been paired with Nokia Wireless Image Headset. You can simultaneously have at the most 10 paired devices.hs-13w_en1_draft2.fm Page 34 Thursday, August 5, 2004 7:25 AM

Menu functions35To delete a pairing, select the pairing to be deleted and press Delete and OK to confirm.•Bluetooth settings. Select•My visibility to define the devices your Nokia Wireless Image Headset is visible to. If you select Shown to all, you are visible to all devices using Bluetooth wireless technology. If you select Hidden, only the devices you are paired with can see you, although you can still see all the compatible devices.•My name to change Nokia Wireless Image Headset name. The name is an identifier for your Nokia Wireless Image Headset and the compatible devices should be able to recognise you from it.When other devices attempt to connect to Nokia Wireless Image Headset:When other devices attempt to connect to your Nokia Wireless Image Headset, a notification is shown on the display. Press Accept to accept and Reject to reject the connection.Time and date settingsClockPress Menu, and select Settings, Time and date settings and Clock.Select Show clock (or Hide clock) to show (or hide) the time on the display in standby mode. Select Set the time to adjust the clock to the correct time (see Using the text editor on page 18), and Time format to select 12-hour or 24-hour time format.hs-13w_en1_draft2.fm Page 35 Thursday, August 5, 2004 7:25 AM

Menu functions36DatePress Menu, and select Settings, Time and date settings and Date.Select Show date (or Hide date) and the date is shown (or hidden) on the display when the phone is in standby mode. Select Set the date to adjust the date, see Using the text editor on page 18. You can also select the date format and separator.Summary after callPress Menu, and select Settings and Summary after call. Select On and, after each call, Nokia Wireless Image Headset briefly displays the duration of the call.LanguagePress Menu, and select Settings and Language. Select the language for the display texts. After you change the language, Nokia Wireless Image Headset asks if you want to change the voice dial language as well.Automatic keyguardYou can set the joystick of Nokia Wireless Image Headset to lock automatically after a preset time delay when Nokia Wireless Image Headset is in standby mode and no functions have been used.Press Menu, and select Settings and Automatic keyguard.hs-13w_en1_draft2.fm Page 36 Thursday, August 5, 2004 7:25 AM

Menu functions37• To activate the automatic keyguard, select On and Nokia Wireless Image Headset displays Set delay:. Key in the time and press OK. To key in numbers, see Using the text editor on page 18.• To deactivate the automatic keyguard, select Off.Refer also Keyguard on page 42.Help text activationTo set Nokia Wireless Image Headset to show or not to show the help texts, press Menu, and select Settings and Help text activation.See also Using the menu on page 17.Display settingsWallpaperYou can set your Nokia Wireless Image Headset to display a background image, wallpaper, when it is in standby mode. Some images are presaved in the Gallery. You can also receive images via Bluetooth wireless technology then save them in the Gallery. Your Nokia Wireless Image Headset supports JPEG and GIF formats.To select a wallpaper picture:1. Press Menu, and select Settings, Display settings and Wallpaper.2. Select Change image and the folder list in the Gallery is shown.3. Open an image folder and scroll to the desired image.hs-13w_en1_draft2.fm Page 37 Thursday, August 5, 2004 7:25 AM

Menu functions38Note that only the images are shown, since text items are not supported as wallpaper.4. To set the image as wallpaper, press Options and select Set as wallpaper.Note that the wallpaper is not displayed when Nokia Wireless Image Headset activates the image mode.To activate or deactivate the wallpaper:Press Menu, and select Settings, Display settings and Wallpaper. To activate/deactivate the wallpaper, select On/Off, respectively.Image modePress Menu, and select Settings, Display settings, Image mode and•On to enable the image mode. When the image mode is enabled, it is activated after the image mode timeout is reached in the standby mode, or when the keyguard is activated.•Off to disable the image mode.•Select image. Nokia Wireless Image Headset displays the Gallery folders. Select a folder and scroll to the image or image show you want, press Options and select Set as image mode.•Image mode timeout to define the timeout in standby mode after which the image mode is activated. Select one of the predefined timeouts or Other. If you select Other, key in the timeout you want. To key in the numbers, see Using the text editor on page 18.hs-13w_en1_draft2.fm Page 38 Thursday, August 5, 2004 7:25 AM

Menu functions39Colour schemesYou can change the colour in some display components, for example, indicators and signal bars.Press Menu, and select Settings, Display settings and Colour schemes. Select the desired colour scheme.Display brightnessYou can change the brightness level of your Nokia Wireless Image Headset display.Press Menu, and select Settings, Display settings and Display brightness. Scroll with and to decrease and increase the brightness level, and press OK to save the new level it.Display light timeoutYou can define how long the display light stays on if the joystick is not pressed.Press Menu, and select Settings, Display settings and Lights. Select one of the predefined timeouts or Other. If you select Other, key in the timeout you want. To key in the numbers, see Using the text editor on page 18.Tone settingsPress Menu, and select Settings, Tone settings and•Buzzer audio to turn Nokia Wireless Image Headset audio tones on or off. If the tones are off, no incoming call alert tones, keypad tones or warning tones are played.hs-13w_en1_draft2.fm Page 39 Thursday, August 5, 2004 7:25 AM

Menu functions40•Incoming call alert to select how the phone notifies you of an incoming voice call. The options are Ringing, Ascending, Ring once, Beep once and Off.•Ringing tone to select the ringing tone for incoming voice calls.•Ringing volume to set the volume for incoming voice calls.•Keypad tones to set Nokia Wireless Image Headset to sound a tone each time a key is pressed.•Warning tones to set Nokia Wireless Image Headset to sound tones, for example, when the battery is running out of power.Voice dial settingsPress Menu, and select Settings, Voice dial settings and•Voice dial language to set the language for voice dialling. The correct language enables Nokia Wireless Image Headset to recognise names with greater accuracy.After you change the language, Nokia Wireless Image Headset asks if you want to change the display text language as well.•Repeat dialled name. Select On if you want Nokia Wireless Image Headset to repeat the name after you have said it to confirm your choice before dialling the number.•Reset voice dial settings to reset the voice dial settings. Note that the language setting does not change.hs-13w_en1_draft2.fm Page 40 Thursday, August 5, 2004 7:25 AM

Menu functions41Device settingsPress Menu, and select Settings, Device settings and•Phone book memory status to see how much memory is used for phone book entries and how much is still free for saving new names and phone numbers.•Gallery status to see how much memory is used for the Gallery files and how much is still free for saving new images and text files.Download application pushTo push the Phonet download application to the phone that is connected to Nokia Wireless Image Headset, press Menu, and select Settings and Update phone. Confirm the push by pressing Yes. For more information, see Switching Nokia Wireless Image Headset on for the first time on page 11.Restoring factory settingsTo reset some of the menu settings to their original values, press Menu, and select Settings and Restore factory settings. Key in the Bluetooth passcode (see page 6) and press OK. Note that the data you have keyed in or copied from a phone, for example, the names and phone numbers saved in the phone book are not deleted.hs-13w_en1_draft2.fm Page 41 Thursday, August 5, 2004 7:25 AM

Menu functions42■KeyguardYou can lock the joystick to prevent it being accidentally used.•Locking the joystickIn standby mode, press Menu and select Keyguard.The image mode is activated.•Unlocking the joystickPress the joystick to any direction to exit the image mode. In standby mode, press Unlock and then OK within 1.5 seconds.If you receive an incoming call when the keyguard is on, the keyguard is automatically deactivated. When you end or reject the call, the joystick will automatically be locked again.For setting the keyguard to automatically activate when the joystick has not been pressed for a while, see Automatic keyguard on page 36.hs-13w_en1_draft2.fm Page 42 Thursday, August 5, 2004 7:25 AM

Battery information436. Battery information■Charging and DischargingYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, buy a new battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.Unplug the charger from the electrical plug and the device when not in use. Do not leave the battery connected to a charger. Overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time. Temperature extremes can affect the ability of your battery to charge.To prolong battery life of NiMh batteries, discharge the battery from time to time by leaving your device switched on until it turns itself off. Do not attempt to discharge the battery by any other means.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for hs-13w_en1_draft2.fm Page 43 Thursday, August 5, 2004 7:25 AM

Battery information44example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire! Dispose of batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.hs-13w_en1_draft2.fm Page 44 Thursday, August 5, 2004 7:25 AM

CARE AND MAINTENANCE45CARE AND MAINTENANCEYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.hs-13w_en1_draft2.fm Page 45 Thursday, August 5, 2004 7:25 AM

CARE AND MAINTENANCE46All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.hs-13w_en1_draft2.fm Page 46 Thursday, August 5, 2004 7:25 AM

CARE AND MAINTENANCE47FCC Notice - Nokia Wireless Image HeadsetThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference; and2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Note: Modifications not expressly approved by Nokia could void the user's authority to operate the equipment.hs-13w_en1_draft2.fm Page 47 Thursday, August 5, 2004 7:25 AM

CARE AND MAINTENANCE48FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.hs-13w_en1_draft2.fm Page 48 Thursday, August 5, 2004 7:25 AM

Navigation menu

Upload a User Manual

Namespaces

Wiki Guide
HTML
PDF
Info

Views

User Manual
Discussion / Help

Navigation

© 2024 UserManual.wiki | Privacy Policy

Contact Us
DMCA