Microsoft HS-25W Wireless Headsett HS-25W User Manual HS 25W UG draft5 5

Microsoft Mobile Oy Wireless Headsett HS-25W HS 25W UG draft5 5

Manual

Nokia Bluetooth Headset BH-900
User Guide
9240373
Issue 1
HS-25W_UG_draft5-5.fm Page 1 Wednesday, January 25, 2006 3:02 PM
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole responsibility that the product HS-25W is
in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of
the Declaration of Conformity can be found at http://www.nokia.com/phones/
declaration_of_conformity/.
The crossed-out wheeled bin means that within the European Union the product
must be taken to separate collection at the product end-of-life. Do not dispose of
these products as unsorted municipal waste.
Copyright © 2006 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other
product and company names mentioned herein may be trademarks or tradenames of their
respective owners.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Nokia operates a policy of continuous development. Nokia reserves the right to make
changes and improvements to any of the products described in this document without prior
notice.
Under no circumstances shall Nokia be responsible for any loss of data or income or any
special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose, are made in relation to the
accuracy, reliability or contents of this document. Nokia reserves the right to revise this
document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer
nearest to you.
Unauthorized changes or modifications to this device may void the user's authority to
operate the equipment.
Export Controls
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
9240373/Issue 1 EN
HS-25W_UG_draft5-5.fm Page 2 Wednesday, January 25, 2006 3:02 PM
3
Contents
1. Introduction ......................... 4
Bluetooth wireless technology .......... 4
2. Get started............................ 5
Overview .................................................. 5
Chargers and batteries......................... 5
Charge the battery................................ 6
Switch the headset on or off ............. 6
Pair the headset with
a compatible phone.............................. 6
Disconnect the headset
from the phone................................... 7
Reconnect the paired headset
to your phone...................................... 7
Troubleshooting ..................................... 7
3. Basic use ............................... 9
Place the headset on the ear ............. 9
The sliding boom ................................... 9
Call handling......................................... 10
Adjust the earphone volume............ 10
Mute or unmute the
microphone ........................................... 10
Push to talk (PTT) calls....................... 10
Switch a call between
phone and headset.............................. 11
Use the headset with
several phones...................................... 11
Clear the settings ................................ 12
4. Battery information ........... 13
Care and maintenance ........... 14
FCC Notice .............................. 15
HS-25W_UG_draft5-5.fm Page 3 Wednesday, January 25, 2006 3:02 PM
Introduction
4
1. Introduction
The Nokia Bluetooth Headset BH-900 allows you freedom to make and
receive calls while on the move or in the office. The headset has a sliding
boom that allows to answer and end calls and to talk at a lower volume
or in a noisy environment.
You can connect the headset to a compatible phone that supports
Bluetooth wireless technology.
Read this user guide carefully before using the headset. Read also the
user guide for your phone, which provides important safety and
maintenance information. Keep the headset out of reach of small
children.
Bluetooth wireless technology
Bluetooth wireless technology makes it possible to connect compatible
communication devices without using cables. A Bluetooth connection
does not require that the phone and the headset be in line of sight, but
both devices should be within 10 meters (30 feet) of each other.
Connections can be subject to interference from obstructions, such as
walls or other electronic devices.
The wireless headset is compliant with Bluetooth Specification 2.0
supporting the following profiles: Headset Profile 1.1 and Handsfree
Profile 1.5. Check with the manufacturers of other devices to determine
their compatibility with this device.
There may be restrictions on using Bluetooth technology in some
locations. Check with your local authorities or service provider.
HS-25W_UG_draft5-5.fm Page 4 Wednesday, January 25, 2006 3:02 PM
Get started
5
2. Get started
Overview
The headset contains the following parts as shown in the figure:
Indicator light (1)
Volume key (2)
Power key (3)
Sliding boom (4)
Answer/end key (5)
Charger connector (6)
Earphone (7)
Microphone (8)
Before you can start using the headset, you must charge the battery and
pair the headset with a compatible phone.
Note: Parts of the headset are magnetic. Metallic materials may be
attracted to the headset. Do not place credit cards or other magnetic
storage media near the headset, because information stored on them
may be erased.
Chargers
Check the model number of any charger before using it with this device. The
Nokia Bluetooth Headset BH-900 is intended for use with the AC-3, AC-4, and
DC-4 chargers.
Warning: Use only chargers approved by Nokia for use with this
particular enhancement. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When
you disconnect the power cord of any enhancement, grasp and pull the plug, not
the cord.
HS-25W_UG_draft5-5.fm Page 5 Wednesday, January 25, 2006 3:02 PM
Get started
6
Charge the battery
This device has an internal, non-removable, rechargeable battery. Do
not attempt to remove the battery from the device as you may damage
the device.
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the
headset as shown in the figure.
The red indicator light is displayed
during charging. If charging does not
start, disconnect the charger, plug it in
again, and retry. Charging the battery fully may take up to 2 hours.
3. When the battery is fully charged, the green indicator light is
displayed. Disconnect the charger from the wall outlet and the
headset.
The fully charged battery has power for up to 8 hours of talk-time or up
to 180 hours of standby time. However, the talk and standby times may
vary when used with different mobile phones or other compatible
Bluetooth devices, usage settings, usage styles, and environments.
When the battery is running out of power, the headset beeps, and the
red indicator light starts to flash.
Switch the headset on or off
To switch on, press and hold the power key. The headset beeps, and the
green indicator light starts to flash. The indicator light turns blue when
the headset is connected to your phone and ready for use.
To switch off, press and hold the power key. The headset beeps, and the
red indicator light is displayed briefly.
Pair the headset with a compatible phone
1. Switch on your phone and the headset.
2. Activate the Bluetooth feature on the phone, and set the phone to
search for Bluetooth devices. See the user guide of your phone for
instructions.
HS-25W_UG_draft5-5.fm Page 6 Wednesday, January 25, 2006 3:02 PM
Get started
7
3. Select the headset (Nokia BH-900) from the list of found devices.
4. Enter the passcode 0000 to pair and connect the headset to your
phone. In some phones you may need to make the connection
separately after pairing. See the user guide of your phone for details.
You only need to pair the headset with your phone once.
5. If the pairing was successful, the headset beeps and appears in the
phone menu where you can view the currently paired Bluetooth
devices.
Disconnect the headset from the phone
To disconnect the headset from your phone (for example, to connect the
phone to another Bluetooth device), do one of the following:
Switch off the headset.
Disconnect the headset in the Bluetooth menu of your phone.
Move the headset more than 10 meters (30 feet) away from the
phone.
You do not need to delete the pairing with the headset to disconnect it.
Reconnect the paired headset to your phone
To connect the headset to your phone, switch on the headset, make the
connection in the Bluetooth menu of your phone, or press and hold the
answer/end key.
You can set your phone to connect with the headset automatically
when the headset is switched on. To do this in Nokia phones, change
your paired device settings in the Bluetooth menu.
Troubleshooting
If you cannot connect the headset to your phone, do as follows:
Ensure that the headset is charged, switched on, and paired with
your phone.
Ensure that the Bluetooth feature is activated on your phone.
HS-25W_UG_draft5-5.fm Page 7 Wednesday, January 25, 2006 3:02 PM
Get started
8
Check that the headset is within 10 meters (30 feet) of your phone
and that there are no obstructions between the headset and the
phone, such as walls or other electronic devices.
To reset the headset if it stops functioning, although it is charged,
plug the headset into a charger, and briefly press the power key and
the middle of the volume key at the same time. This reset does not
clear your settings (for example, pairing settings).
HS-25W_UG_draft5-5.fm Page 8 Wednesday, January 25, 2006 3:02 PM
Basic use
9
3. Basic use
Place the headset on the
ear
Place the headset over your ear into a
comfortable position, and point it toward
your mouth as shown in the figure.
The sliding boom
The sliding boom brings the microphone closer to your mouth, which
improves the audio quality even when you talk at a low volume or in a
noisy environment. You can use the boom to answer, end, or reject a
call.
To use the boom, gently pull it down toward your mouth (1), or push it
up to its initial position (2).
Call handling
To make a call, use your phone in the normal way when the headset is
connected to your phone.
If your phone supports redialing, press the answer/end key twice briefly
when no call is in progress.
If your phone supports voice dialing, press and hold the answer/end key
when no call is in progress, and proceed as described in the user guide of
your phone.
To answer a call, pull the boom down toward your mouth, press the
answer/end key, or use the phone keys. If the automatic answer function
HS-25W_UG_draft5-5.fm Page 9 Wednesday, January 25, 2006 3:02 PM
Basic use
10
is set on, the phone automatically answers the incoming call after one
ring.
To reject an incoming call, pull the boom down and push it immediately
up, or briefly press the answer/end key twice.
To end a call, push the boom up to its initial position, press the answer/
end key, or use the phone keys.
Adjust the earphone volume
Press the volume key up to increase or down to decrease the volume. To
adjust the volume quickly, press and hold the key in the desired
direction.
Mute or unmute the microphone
To mute or unmute the microphone during a phone call, briefly press the
middle of the volume key. A long tone is played. When the microphone is
muted, the blue indicator light flashes continuously. The mute function
cannot be used during a PTT call.
Push to talk (PTT) calls
You can use the headset to make and receive push to talk (PTT) calls. To
use this network service, your phone needs to support it and the
function needs to be set to on in the phone. For general information on
using the PTT function, see the user guide of your compatible phone.
To make a PTT call to the default PTT channel defined in your phone,
press the middle of the volume key (while no call is in progress) and hold
it pressed as long as you speak.
When you receive a PTT call while no call is in progress, the headset
beeps and you start to hear speech from the group. To answer and speak
to the listened channel, press the middle of the volume key within the
time defined by the network operator or service provider, and hold it
pressed as long as you speak. To answer and speak to the default
channel, press the middle of the volume key after the time defined by
the network operator or service provider, and hold it pressed as long as
HS-25W_UG_draft5-5.fm Page 10 Wednesday, January 25, 2006 3:02 PM
Basic use
11
you speak. For details on the time limit, contact your network operator
or service provider.
Switch a call between phone and headset
To switch the phone call or PTT call between the headset and a
compatible Nokia phone, press and hold the answer/end key, or use the
respective function in your phone.
Use the headset with several phones
You can pair the headset with up to eight phones but connect it to only
one phone at a time.
The phone that was first paired with the headset is the default phone. If
the headset is switched on within 10 meters (30 feet) of several paired
phones, the headset tries to connect to the default phone.
If the headset cannot connect to the default phone, the headset tries to
connect to the last used phone. If the headset cannot connect to this
phone either, one of the other six paired phones can be connected to the
headset. See the user guide of your phone for details.
Clear the settings
If you want to clear all the settings from the headset (for example, the
list of paired devices), press and hold the power key and the volume key
up for 10 seconds. After the settings are cleared, the headset beeps
twice, and the red, green, and blue indicator lights alternate for several
seconds.
HS-25W_UG_draft5-5.fm Page 11 Wednesday, January 25, 2006 3:02 PM
Battery information
12
4. Battery information
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times, but it will
eventually wear out. Recharge your battery only with Nokia approved chargers
designated for this device.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave a fully charged battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery will lose its charge over
time.
Never use any charger that is damaged.
Leaving the device in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
HS-25W_UG_draft5-5.fm Page 12 Wednesday, January 25, 2006 3:02 PM
Care and maintenance
13
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
Keep all accessories and enhancements out of the reach of small children.
Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, allow it to dry completely.
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility.
HS-25W_UG_draft5-5.fm Page 13 Wednesday, January 25, 2006 3:02 PM
FCC Notice
14
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: 1. This device may not cause harmful
interference; and 2. This device must accept any interference received,
including interference that may cause undesired operation. This
equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV
technician for help. NOTE: FCC Radiation Exposure Statement: This
equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. NOTE:
Modifications not expressly approved by Nokia could void the user's
authority to operate the equipment.
HS-25W_UG_draft5-5.fm Page 14 Wednesday, January 25, 2006 3:02 PM
Nokia Bluetooth Headset BH-900
User Guide
9240373
Issue 1
HS-25W_UG_draft5-5.fm Page 1 Wednesday, January 25, 2006 3:02 PM
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION declare under our sole responsibility that the product HS-25W is
in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of
the Declaration of Conformity can be found at http://www.nokia.com/phones/
declaration_of_conformity/.
The crossed-out wheeled bin means that within the European Union the product
must be taken to separate collection at the product end-of-life. Do not dispose of
these products as unsorted municipal waste.
Copyright © 2006 Nokia. All rights reserved.
Reproduction, transfer, distribution or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other
product and company names mentioned herein may be trademarks or tradenames of their
respective owners.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Nokia operates a policy of continuous development. Nokia reserves the right to make
changes and improvements to any of the products described in this document without prior
notice.
Under no circumstances shall Nokia be responsible for any loss of data or income or any
special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law, no
warranties of any kind, either express or implied, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose, are made in relation to the
accuracy, reliability or contents of this document. Nokia reserves the right to revise this
document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia dealer
nearest to you.
Unauthorized changes or modifications to this device may void the user's authority to
operate the equipment.
Export Controls
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
9240373/Issue 1 EN
HS-25W_UG_draft5-5.fm Page 2 Wednesday, January 25, 2006 3:02 PM
3
Contents
1. Introduction ......................... 4
Bluetooth wireless technology .......... 4
2. Get started............................ 5
Overview .................................................. 5
Chargers and batteries......................... 5
Charge the battery................................ 6
Switch the headset on or off ............. 6
Pair the headset with
a compatible phone.............................. 6
Disconnect the headset
from the phone................................... 7
Reconnect the paired headset
to your phone...................................... 7
Troubleshooting ..................................... 7
3. Basic use ............................... 9
Place the headset on the ear ............. 9
The sliding boom ................................... 9
Call handling......................................... 10
Adjust the earphone volume............ 10
Mute or unmute the
microphone ........................................... 10
Push to talk (PTT) calls....................... 10
Switch a call between
phone and headset.............................. 11
Use the headset with
several phones...................................... 11
Clear the settings ................................ 12
4. Battery information ........... 13
Care and maintenance ........... 14
FCC Notice .............................. 15
HS-25W_UG_draft5-5.fm Page 3 Wednesday, January 25, 2006 3:02 PM
Introduction
4
1. Introduction
The Nokia Bluetooth Headset BH-900 allows you freedom to make and
receive calls while on the move or in the office. The headset has a sliding
boom that allows to answer and end calls and to talk at a lower volume
or in a noisy environment.
You can connect the headset to a compatible phone that supports
Bluetooth wireless technology.
Read this user guide carefully before using the headset. Read also the
user guide for your phone, which provides important safety and
maintenance information. Keep the headset out of reach of small
children.
Bluetooth wireless technology
Bluetooth wireless technology makes it possible to connect compatible
communication devices without using cables. A Bluetooth connection
does not require that the phone and the headset be in line of sight, but
both devices should be within 10 meters (30 feet) of each other.
Connections can be subject to interference from obstructions, such as
walls or other electronic devices.
The wireless headset is compliant with Bluetooth Specification 2.0
supporting the following profiles: Headset Profile 1.1 and Handsfree
Profile 1.5. Check with the manufacturers of other devices to determine
their compatibility with this device.
There may be restrictions on using Bluetooth technology in some
locations. Check with your local authorities or service provider.
HS-25W_UG_draft5-5.fm Page 4 Wednesday, January 25, 2006 3:02 PM
Get started
5
2. Get started
Overview
The headset contains the following parts as shown in the figure:
Indicator light (1)
Volume key (2)
Power key (3)
Sliding boom (4)
Answer/end key (5)
Charger connector (6)
Earphone (7)
Microphone (8)
Before you can start using the headset, you must charge the battery and
pair the headset with a compatible phone.
Note: Parts of the headset are magnetic. Metallic materials may be
attracted to the headset. Do not place credit cards or other magnetic
storage media near the headset, because information stored on them
may be erased.
Chargers
Check the model number of any charger before using it with this device. The
Nokia Bluetooth Headset BH-900 is intended for use with the AC-3, AC-4, and
DC-4 chargers.
Warning: Use only chargers approved by Nokia for use with this
particular enhancement. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When
you disconnect the power cord of any enhancement, grasp and pull the plug, not
the cord.
HS-25W_UG_draft5-5.fm Page 5 Wednesday, January 25, 2006 3:02 PM
Get started
6
Charge the battery
This device has an internal, non-removable, rechargeable battery. Do
not attempt to remove the battery from the device as you may damage
the device.
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the
headset as shown in the figure.
The red indicator light is displayed
during charging. If charging does not
start, disconnect the charger, plug it in
again, and retry. Charging the battery fully may take up to 2 hours.
3. When the battery is fully charged, the green indicator light is
displayed. Disconnect the charger from the wall outlet and the
headset.
The fully charged battery has power for up to 8 hours of talk-time or up
to 180 hours of standby time. However, the talk and standby times may
vary when used with different mobile phones or other compatible
Bluetooth devices, usage settings, usage styles, and environments.
When the battery is running out of power, the headset beeps, and the
red indicator light starts to flash.
Switch the headset on or off
To switch on, press and hold the power key. The headset beeps, and the
green indicator light starts to flash. The indicator light turns blue when
the headset is connected to your phone and ready for use.
To switch off, press and hold the power key. The headset beeps, and the
red indicator light is displayed briefly.
Pair the headset with a compatible phone
1. Switch on your phone and the headset.
2. Activate the Bluetooth feature on the phone, and set the phone to
search for Bluetooth devices. See the user guide of your phone for
instructions.
HS-25W_UG_draft5-5.fm Page 6 Wednesday, January 25, 2006 3:02 PM
Get started
7
3. Select the headset (Nokia BH-900) from the list of found devices.
4. Enter the passcode 0000 to pair and connect the headset to your
phone. In some phones you may need to make the connection
separately after pairing. See the user guide of your phone for details.
You only need to pair the headset with your phone once.
5. If the pairing was successful, the headset beeps and appears in the
phone menu where you can view the currently paired Bluetooth
devices.
Disconnect the headset from the phone
To disconnect the headset from your phone (for example, to connect the
phone to another Bluetooth device), do one of the following:
Switch off the headset.
Disconnect the headset in the Bluetooth menu of your phone.
Move the headset more than 10 meters (30 feet) away from the
phone.
You do not need to delete the pairing with the headset to disconnect it.
Reconnect the paired headset to your phone
To connect the headset to your phone, switch on the headset, make the
connection in the Bluetooth menu of your phone, or press and hold the
answer/end key.
You can set your phone to connect with the headset automatically
when the headset is switched on. To do this in Nokia phones, change
your paired device settings in the Bluetooth menu.
Troubleshooting
If you cannot connect the headset to your phone, do as follows:
Ensure that the headset is charged, switched on, and paired with
your phone.
Ensure that the Bluetooth feature is activated on your phone.
HS-25W_UG_draft5-5.fm Page 7 Wednesday, January 25, 2006 3:02 PM
Get started
8
Check that the headset is within 10 meters (30 feet) of your phone
and that there are no obstructions between the headset and the
phone, such as walls or other electronic devices.
To reset the headset if it stops functioning, although it is charged,
plug the headset into a charger, and briefly press the power key and
the middle of the volume key at the same time. This reset does not
clear your settings (for example, pairing settings).
HS-25W_UG_draft5-5.fm Page 8 Wednesday, January 25, 2006 3:02 PM
Basic use
9
3. Basic use
Place the headset on the
ear
Place the headset over your ear into a
comfortable position, and point it toward
your mouth as shown in the figure.
The sliding boom
The sliding boom brings the microphone closer to your mouth, which
improves the audio quality even when you talk at a low volume or in a
noisy environment. You can use the boom to answer, end, or reject a
call.
To use the boom, gently pull it down toward your mouth (1), or push it
up to its initial position (2).
Call handling
To make a call, use your phone in the normal way when the headset is
connected to your phone.
If your phone supports redialing, press the answer/end key twice briefly
when no call is in progress.
If your phone supports voice dialing, press and hold the answer/end key
when no call is in progress, and proceed as described in the user guide of
your phone.
To answer a call, pull the boom down toward your mouth, press the
answer/end key, or use the phone keys. If the automatic answer function
HS-25W_UG_draft5-5.fm Page 9 Wednesday, January 25, 2006 3:02 PM
Basic use
10
is set on, the phone automatically answers the incoming call after one
ring.
To reject an incoming call, pull the boom down and push it immediately
up, or briefly press the answer/end key twice.
To end a call, push the boom up to its initial position, press the answer/
end key, or use the phone keys.
Adjust the earphone volume
Press the volume key up to increase or down to decrease the volume. To
adjust the volume quickly, press and hold the key in the desired
direction.
Mute or unmute the microphone
To mute or unmute the microphone during a phone call, briefly press the
middle of the volume key. A long tone is played. When the microphone is
muted, the blue indicator light flashes continuously. The mute function
cannot be used during a PTT call.
Push to talk (PTT) calls
You can use the headset to make and receive push to talk (PTT) calls. To
use this network service, your phone needs to support it and the
function needs to be set to on in the phone. For general information on
using the PTT function, see the user guide of your compatible phone.
To make a PTT call to the default PTT channel defined in your phone,
press the middle of the volume key (while no call is in progress) and hold
it pressed as long as you speak.
When you receive a PTT call while no call is in progress, the headset
beeps and you start to hear speech from the group. To answer and speak
to the listened channel, press the middle of the volume key within the
time defined by the network operator or service provider, and hold it
pressed as long as you speak. To answer and speak to the default
channel, press the middle of the volume key after the time defined by
the network operator or service provider, and hold it pressed as long as
HS-25W_UG_draft5-5.fm Page 10 Wednesday, January 25, 2006 3:02 PM
Basic use
11
you speak. For details on the time limit, contact your network operator
or service provider.
Switch a call between phone and headset
To switch the phone call or PTT call between the headset and a
compatible Nokia phone, press and hold the answer/end key, or use the
respective function in your phone.
Use the headset with several phones
You can pair the headset with up to eight phones but connect it to only
one phone at a time.
The phone that was first paired with the headset is the default phone. If
the headset is switched on within 10 meters (30 feet) of several paired
phones, the headset tries to connect to the default phone.
If the headset cannot connect to the default phone, the headset tries to
connect to the last used phone. If the headset cannot connect to this
phone either, one of the other six paired phones can be connected to the
headset. See the user guide of your phone for details.
Clear the settings
If you want to clear all the settings from the headset (for example, the
list of paired devices), press and hold the power key and the volume key
up for 10 seconds. After the settings are cleared, the headset beeps
twice, and the red, green, and blue indicator lights alternate for several
seconds.
HS-25W_UG_draft5-5.fm Page 11 Wednesday, January 25, 2006 3:02 PM
Battery information
12
4. Battery information
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times, but it will
eventually wear out. Recharge your battery only with Nokia approved chargers
designated for this device.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave a fully charged battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery will lose its charge over
time.
Never use any charger that is damaged.
Leaving the device in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
HS-25W_UG_draft5-5.fm Page 12 Wednesday, January 25, 2006 3:02 PM
Care and maintenance
13
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you protect your warranty
coverage.
Keep all accessories and enhancements out of the reach of small children.
Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, allow it to dry completely.
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility.
HS-25W_UG_draft5-5.fm Page 13 Wednesday, January 25, 2006 3:02 PM
FCC Notice
14
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: 1. This device may not cause harmful
interference; and 2. This device must accept any interference received,
including interference that may cause undesired operation. This
equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. Consult the dealer or an experienced radio/TV
technician for help. NOTE: FCC Radiation Exposure Statement: This
equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. NOTE:
Modifications not expressly approved by Nokia could void the user's
authority to operate the equipment.
HS-25W_UG_draft5-5.fm Page 14 Wednesday, January 25, 2006 3:02 PM

Navigation menu