Microsoft HS-72W Nokia Bluetooth Stereo Headset User Manual HS 72W UG en1
Microsoft Mobile Oy Nokia Bluetooth Stereo Headset HS 72W UG en1
Users Manual
![](/img.php?id=867317&img=bg1.png)
Nokia Bluetooth Stereo
Headset BH-903 User Guide
9205806
Issue 1 EN
HS-72W_UG_en1.fm Page 1 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg2.png)
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this HS-72W product is
in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC. A copy of the Declaration of
Conformity can be found at http://www.nokia.com/phones/
declaration_of_conformity/.
© 2007 Nokia. All rights reserved.
Nokia and Nokia Connecting People are registered trademarks of
Nokia Corporation. Other product and company names mentioned
herein may be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the
contents in this document in any form without the prior written
permission of Nokia is prohibited.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Nokia operates a policy of ongoing development. Nokia reserves the
right to make changes and improvements to any of the products
described in this document without prior notice.
To the maximum extent permitted by applicable law, under no
circumstances shall Nokia or any of its licensors be responsible for
any loss of data or income or any special, incidental, consequential
or indirect damages howsoever caused.
HS-72W_UG_en1.fm Page 2 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg3.png)
The contents of this document are provided "as is". Except as
required by applicable law, no warranties of any kind, either express
or implied, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose, are made in
relation to the accuracy, reliability or contents of this document.
Nokia reserves the right to revise this document or withdraw it at
any time without prior notice.
The availability of particular products may vary by region. Please
check with your Nokia dealer for details.
Export Controls
This device may contain commodities, technology or software
subject to export laws and regulations from the US and other
countries. Diversion contrary to law is prohibited.
9205806 / Issue 1 EN
HS-72W_UG_en1.fm Page 3 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg4.png)
Contents
4
Contents
1. Introduction .............................................................. 6
Bluetooth wireless technology............................................................... 7
2. Get started................................................................. 9
Keys and parts............................................................................................. 9
Chargers..................................................................................................... 11
Charge the battery.................................................................................. 12
Switch on or off....................................................................................... 13
Switch on .............................................................................................. 13
Switch off.............................................................................................. 14
Pair and connect the headset.............................................................. 14
Pair and connect the headset with a phone ............................... 14
Pair and connect the headset with a music device................... 16
Disconnect the headset..................................................................... 16
Reconnect the headset...................................................................... 17
Display........................................................................................................ 18
3. Basic use.................................................................. 21
Wear the headset.................................................................................... 21
Adjust the headset volume................................................................... 22
Lock or unlock the keys......................................................................... 23
View current time ................................................................................... 23
Make a call................................................................................................ 24
Answer a call............................................................................................ 24
Mute or unmute the microphone....................................................... 25
HS-72W_UG_en1.fm Page 4 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg5.png)
Contents
5
Switch the call between headset and phone.................................. 25
Call waiting............................................................................................... 25
Clear settings or reset............................................................................ 26
Troubleshooting....................................................................................... 27
4. Menu functions....................................................... 28
Music player ............................................................................................. 29
FM radio..................................................................................................... 31
Search for a radio station................................................................. 31
Listen to radio ...................................................................................... 32
Recent calls............................................................................................... 33
Settings...................................................................................................... 34
Brightness.............................................................................................. 34
Connections.......................................................................................... 34
Automatic keylock .............................................................................. 35
Language ............................................................................................... 35
Reset ....................................................................................................... 36
5. Battery information ................................................ 37
Care and maintenance ................................................ 39
HS-72W_UG_en1.fm Page 5 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg6.png)
Introduction
6
1. Introduction
With the Nokia Bluetooth Stereo Headset BH-903, you can
listen to music and handle calls hands-free on your
compatible mobile device. The headset also has a built-in
FM radio. You can use the headset with compatible devices
that support Bluetooth wireless technology.
Read this user guide carefully before using the headset. Also
read the user guide for your mobile device. It provides
important safety and maintenance information.
Check www.nokia.com/support or your local Nokia website
for the latest version of the user guide and additional
information related to your Nokia product.
Keep the headset and its accessories out of the reach of
small children.
HS-72W_UG_en1.fm Page 6 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg7.png)
Introduction
7
■Bluetooth wireless technology
Bluetooth wireless technology
allows you to connect
compatible devices without
cables. A Bluetooth connection
does not require that the mobile
device and the headset are in
line of sight, but the maximum
distance between the devices is
10 metres (33 feet). The closer
the mobile device and the headset are to each other, the
better is the performance. The optimal operating range is
shown in dark grey in the picture. The connection is subject
to interference from distance and obstructions (shown in
light grey) or other electronic devices.
The headset is compliant with the Bluetooth Specification
2.0 + EDR supporting the following profiles: Headset Profile
1.1, Hands-Free Profile (HFP) 1.5, Phone Book Access Profile
(PBAP) 1.0, Advanced Audio Distribution Profile (A2DP) 1.0,
and Audio Video Remote Control Profile (AVRCP) 1.0. Check
<10m
HS-72W_UG_en1.fm Page 7 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg8.png)
Introduction
8
with the manufacturers of other devices to determine their
compatibility with this device.
HS-72W_UG_en1.fm Page 8 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg9.png)
Get started
9
2. Get started
■Keys and parts
The headset contains the following parts:
1. Earphones
1
2
4
8
7
9
11
6
3
10
12
13
5
8
9
14
HS-72W_UG_en1.fm Page 9 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bga.png)
Get started
10
2. Controller with a microphone on the back, a mute key
on the side, and an answer/end key on the front.
3. Charger connector
4. Neckstrap
5. Power key
6. Display
7. Rewind key
8. Scroll keys
9. Stop key
10. Menu key
11. Selection key
12. Forward key
13. Play/pause key
14. Answer/end key
The symbols for the rewind key, forward key, stop key, play/
pause key, and answer/end key (14) are shown if the keys
HS-72W_UG_en1.fm Page 10 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bgb.png)
Get started
11
can be used and the headset is not in the power saving
mode or the keys are not locked.
Before you can start using the headset, you must charge the
battery and pair the headset with a compatible device.
Parts of the headset are magnetic. Metallic materials may
be attracted to the headset. Do not place credit cards or
other magnetic storage media near the headset, because
information stored on them may be erased.
■Chargers
This device is intended for use when supplied with power
from the following chargers: AC-3, AC-4, AC-5, and DC-4.
Warning: Use only chargers approved by Nokia for
use with this particular enhancement. The use of
any other types may invalidate any approval or warranty,
and may be dangerous.
When you disconnect the power cord of any enhancement,
grasp and pull the plug, not the cord.
HS-72W_UG_en1.fm Page 11 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bgc.png)
Get started
12
■Charge the battery
Before charging the battery, read “Battery information,”
p. 37.
1. Connect the charger to a wall outlet.
2. Connect the charger
cable to the charger
connector on the headset.
When the charging starts,
Charging is briefly
displayed on the headset.
During charging, a
battery animation is displayed.
It may take a while before charging starts. If charging
does not start, disconnect the charger, and plug it in
again. Charging the battery fully may take up to 1 hour.
3. When the battery is fully charged, is displayed.
Disconnect the charger from the headset and the wall
outlet.
HS-72W_UG_en1.fm Page 12 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bgd.png)
Get started
13
The fully charged battery has power for up to 15 hours of
talk time, up to 250 hours of standby time, up to 15 hours of
music playing time, or up to 15 hours of radio playing time.
However, the talk and standby times may vary with
different compatible Bluetooth devices, usage settings,
usage styles, and environments.
When battery power is low, the headset beeps every 5
minutes and flashes on the display. Recharge the
battery.
■Switch on or off
Switch on
To switch on, press and hold the power key until the headset
beeps and the Nokia logo is displayed.
The headset tries to connect to one of the four most
recently used devices that support the Hands-Free
Bluetooth profile or the most recently used device that
supports the A2DP Bluetooth profile.
HS-72W_UG_en1.fm Page 13 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bge.png)
Get started
14
If the headset has not been paired with a device, it enters
the pairing mode. See “Pair and connect the headset,” p. 14.
Switch off
To switch off, press and hold the power key until the
headset beeps and Switching off is displayed.
The headset switches off automatically if it is not
connected to a paired device and the headset is not used
within about 30 minutes.
■Pair and connect the headset
Pair and connect the headset with a phone
If your mobile phone supports the A2DP Bluetooth profile
and has a music player, you can also use the headset to
operate the player.
1. Ensure that your phone is switched on.
HS-72W_UG_en1.fm Page 14 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bgf.png)
Get started
15
2. If the headset has not been previously paired with a
device, switch on the headset. The headset
automatically enters the pairing mode.
If the headset has been previously paired with another
device, switch off the headset, and press and hold the
power key until a text about pairing is displayed. You
can also start pairing using the Pairing function
described in “Connections,” p. 34.
To cancel pairing, press the selection key.
3. Activate the Bluetooth feature on the phone, and set it
to search for Bluetooth devices.
4. Select the headset (Nokia BH-903) from the list of
found devices on your phone.
5. Enter the passcode 0000 to pair and connect the
headset to your phone. With some phones, you may
need to make the connection separately after pairing.
You only need to pair the headset with your phone once.
If pairing succeeds, Pairing OK is displayed, and the headset
appears in the menu of the phone where you can view the
currently paired Bluetooth devices.
HS-72W_UG_en1.fm Page 15 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg10.png)
Get started
16
Pair and connect the headset with a music
device
If your phone does not support the A2DP Bluetooth profile,
you can separately pair the headset with the phone and a
music device that supports this profile.
If you have paired and connected the headset with your
phone, disconnect the headset from it before pairing the
headset with a music device.
To pair the headset with a music device, follow the
instructions in “Pair and connect the headset with a phone,”
p. 14. If your music device does not have a keypad, it may
use the Bluetooth passcode 0000 by default. If this is not
the case, see the user guide of your music device to change
the default Bluetooth passcode to 0000.
If pairing succeeds, Pairing OK is displayed.
Disconnect the headset
To disconnect the headset from your mobile phone or music
device, do one of the following:
HS-72W_UG_en1.fm Page 16 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg11.png)
Get started
17
• Switch off the headset.
• Press the menu key, and select > Connection and
Call connections or Music connections. For details, see
“Connections,” p. 34.
• Disconnect the headset in the Bluetooth menu of your
device.
You do not need to delete pairing with the headset to
disconnect it.
Reconnect the headset
If the headset loses the connection to a paired device, you
can connect the headset manually to the device. Switch on
the headset, and do one of the following:
• Make the connection in the Bluetooth menu of the
paired device.
• Press the menu key, and select > Connection and
Call connections or Music connections. For details, see
“Connections,” p. 34.
HS-72W_UG_en1.fm Page 17 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg12.png)
Get started
18
• Press and hold the answer/end key to connect to a
device that supports the Hands-Free Bluetooth profile,
or press and hold the play/pause key to connect to a
device that supports the A2DP Bluetooth profile.
You may be able to set your device so that the headset
connects to it automatically when the headset is switched
on. To do this in a Nokia device, change your paired device
settings in the Bluetooth menu.
■Display
When the headset is on but not used for about 10 seconds,
the display goes to the power saving mode. In this mode,
the display turns off for about 5 seconds and turns on for
about 1 second at regular intervals.
To activate the display when it is in the power saving mode,
press any key.
To activate the display and keys if the keys are locked,
briefly press the power key. See also “Lock or unlock the
keys,” p. 23.
HS-72W_UG_en1.fm Page 18 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg13.png)
Get started
19
The following indicators can be shown on the display:
The headset is connected to a compatible device
and ready for use.
The headset is not connected to a compatible
device.
A call is in progress.
A call is active and another call is on hold.
You have missed calls. This indicator is not shown
in the radio and music player modes.
The microphone is muted (during a call).
The battery is fully charged.
The battery charge is low.
The headset keys are locked.
The headset is in the radio mode.
HS-72W_UG_en1.fm Page 19 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg14.png)
Get started
20
The headset is in the music player mode.
HS-72W_UG_en1.fm Page 20 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg15.png)
Basic use
21
3. Basic use
■Wear the headset
The headset comes with a pair of earphones with rubber
earpads. If the earpads are too small or not suitable for your
ears, you can replace them with the supplied foam earpads.
You can also place the foam earpads over the rubber ones.
To install the earpads, push them onto the earphones.
To wear the headset, place the
strap around your neck, and
put the earphones into your
ears.
To adjust the length of the
earphone cables, pull the
cables toward or away from the
earphones.
Adjust the microphone as close to your mouth as possible
for optimal audio quality.
HS-72W_UG_en1.fm Page 21 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg16.png)
Basic use
22
Warning: When you use the headset, your ability
to hear outside sounds may be affected. Do not
use the headset where it can endanger your
safety.
■Adjust the headset volume
To adjust the headset volume, move
your finger around the selection key
on the touch sensitive area clockwise
to increase or anticlockwise to
decrease the volume.
Alternatively, use the keys of your
compatible mobile phone or music
device.
You can adjust the volume during a call or when you listen
to the music player or radio.
HS-72W_UG_en1.fm Page 22 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg17.png)
Basic use
23
■Lock or unlock the keys
To lock or unlock the headset keys (also during a call),
briefly press the power key. When the keys are locked,
is displayed.
When you make or receive a call, the key lock remains off
until the call is ended, if you do not manually lock the keys
during the call.
When the key lock is on, the headset cannot be switched
off, and the following key symbols are not shown: answer/
end key, rewind key, forward key, stop key, and play/pause
key.
To set the headset to automatically lock the keys, see
“Automatic keylock,” p. 35.
■View current time
The time is shown only if the headset is connected to a
compatible Nokia device that provides the time to the
headset and the time display is enabled in the device.
HS-72W_UG_en1.fm Page 23 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg18.png)
Basic use
24
To view the time, press the menu key, and press and hold
the selection key in the main menu.
To view the time when the keys are locked, press and hold
the selection key.
■Make a call
To make a call, use your mobile phone in the normal way
when the headset is connected to it.
If your phone supports last number redialling with the
headset, press the answer/end key twice when no call is in
progress. See also “Recent calls,” p. 33.
If your device supports voice dialling with the headset, press
and hold the answer/end key when no call is in progress,
and proceed as described in the phone user guide.
To end a call, press the answer/end key.
■Answer a call
To answer a call, press the answer/end key. To reject a call,
press the answer/end key twice.
HS-72W_UG_en1.fm Page 24 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg19.png)
Basic use
25
■Mute or unmute the microphone
To mute or unmute the microphone, press the mute key
during a call.
■Switch the call between headset and
phone
To switch the call from the headset to the connected phone,
press and hold the power key (the headset switches off), or
use the keys of your phone.
To switch the call back to the headset, switch on the
headset, or press and hold the answer/end key (when the
headset is on).
■Call waiting
Call waiting is a network service. To use call waiting, your
mobile phone must support the Bluetooth Hands-Free
profile 1.5, and call waiting must be set to on in the phone.
HS-72W_UG_en1.fm Page 25 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg1a.png)
Basic use
26
To answer a waiting call and put the current call on hold,
press and hold the answer/end key.
To answer a waiting call and end the current call, press the
answer/end key.
To reject a waiting call and continue the current call, press
the answer/end key twice.
To switch between the active call and the call on hold, press
and hold the answer/end key.
To end the active call and make the call on hold active, press
the answer/end key.
■Clear settings or reset
To restore the original settings of the headset, use the
Setup > Reset function (see “Reset,” p. 36). Alternatively,
switch off the headset, press and hold the power key and
answer/end key at the same time, and press the selection
key to confirm the operation.
To reset the headset if it stops functioning, although it is
charged, plug the headset into a charger, and press the
HS-72W_UG_en1.fm Page 26 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg1b.png)
Basic use
27
power key and answer/end key at the same time. The reset
does not delete the headset settings.
■Troubleshooting
If you cannot connect the headset to your compatible
mobile phone or music device, do the following:
• Ensure that the headset is charged, switched on, and
paired with your device.
• Ensure that the Bluetooth feature is enabled on your
device.
• Ensure that the headset is within 10 metres (33 feet) of
your device and that there are no obstructions between
the headset and the device, such as walls, or other
electronic devices.
If the name of the person calling is not shown on the
headset display, even though it is saved in the mobile phone
connected to the headset, the phone may not be fully
compatible with the headset.
HS-72W_UG_en1.fm Page 27 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg1c.png)
Menu functions
28
4. Menu functions
The headset has a menu facility that contains the following
functions: (music player), (FM radio), (recent
calls), and (settings).
To access the list of menu functions, press the menu key
when no call is in progress. To scroll through the functions,
press either scroll key. To select a function, press the
selection key.
To scroll through settings or setting options, press either
scroll key. If all the settings do not fit on the display, or
is displayed. The active option is indicated by a filled
circle. To select an option, press the selection key.
To return to the previous menu level (or exit the list of menu
functions), press the menu key.
HS-72W_UG_en1.fm Page 28 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg1d.png)
Menu functions
29
■Music player
To use the headset keys to operate your compatible music
device or mobile phone that supports the A2DP Bluetooth
profile, press the menu key, and select . If you have been
listening to the FM radio of the headset, the radio stops.
Tip: To access the music player quickly, press and
hold the menu key.
When the headset is in the music player mode, is
displayed. The available music functions depend on the
device connected to the headset.
To select the next track, press the forward key. To play the
current track from the start, press the rewind key. To select
the previous track, press the rewind key twice.
To listen to the selected track, press the play/pause key.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage
your hearing.
To scroll through the current track, press and hold the
forward or rewind key.
HS-72W_UG_en1.fm Page 29 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg1e.png)
Menu functions
30
To pause or resume playing, press the play/pause key.
To stop playing, press the stop key. To play the current track
from the start when the player is stopped, press the play/
pause key.
To exit the music player, press the stop key twice.
You can also use other functions of the headset, except the
radio, while listening to music. Press the menu key, and
select the desired function.
The following indicators can be shown in the music player:
The music player is playing.
The music player is paused.
The music player is stopped.
The music player is fast-forwarding the tracks or
opening the next track.
The music player is rewinding the tracks or
opening the previous track.
HS-72W_UG_en1.fm Page 30 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg1f.png)
Menu functions
31
■FM radio
To turn on the FM radio of the headset, press the menu key,
and select . If you have been listening to the music
player, the player stops.
When the headset is in the radio mode, is displayed.
The headset cable acts as an antenna for the radio.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage
your hearing.
Search for a radio station
To search for radio stations available at your location, press
and hold the forward or rewind key for about 2 seconds. (To
stop the search, press the stop key.)
When the headset finds a station, the station starts to play,
and the name, frequency, and signal strength of the station
are displayed. The station name is displayed only if the
station supports the RDS (Radio Data Systems) technology.
HS-72W_UG_en1.fm Page 31 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg20.png)
Menu functions
32
To save the station in the headset, press and hold the play/
pause key, press the forward or rewind key to scroll to the
desired memory location, and press and hold the play/pause
key.
Listen to radio
To scroll through saved radio stations, press the forward or
rewind key repeatedly.
To pause listening to the radio, press the stop key. To resume
listening, press the play/pause key.
To stop listening to the radio and exit the radio, press the
stop key twice.
You can also use other functions of the headset, except the
music player, while listening to the radio. Press the menu
key, and select the desired function.
The following indicators can be displayed in the radio mode:
The radio is stopped.
You are searching forwards for radio stations.
HS-72W_UG_en1.fm Page 32 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg21.png)
Menu functions
33
You are searching backwards for radio stations.
The bars beside this indicator show the signal
strength of the radio station. The more bars there
are, the stronger the signal.
■Recent calls
To view recent calls, press the menu key, and select and
the desired submenu. You can view the most recently
dialled, received, and missed calls. When you connect the
headset to your mobile phone, the call information is
transferred from the phone to the headset if the phone
supports this feature.
The phone registers missed and received calls only if the
network supports these functions and the phone is switched
on and within the network service area.
To call a number, scroll to it, and press the answer/end key.
HS-72W_UG_en1.fm Page 33 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg22.png)
Menu functions
34
■Settings
To change headset settings, press the menu key, and select
and the desired submenu.
Brightness
To set the display brightness, select Brightness. Press either
scroll key to scroll to the desired level, and press the
selection key.
Connections
To manage the Bluetooth devices paired with the headset,
select Connection.
To pair the headset with a compatible device, select Pairing
(to cancel the pairing, press the selection key). When Start
pairing? is displayed, press the selection key, and proceed as
instructed in “Pair and connect the headset,” p. 14. If you
start pairing while the headset is connected to a device, the
connection is cancelled.
HS-72W_UG_en1.fm Page 34 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg23.png)
Menu functions
35
To view the currently paired mobile phones that support the
Hands-Free Bluetooth profile, select Call connections; to
view the currently paired music devices that support the
A2DP Bluetooth profile, select Music connections. The
currently connected device is indicated by a filled circle. To
connect the headset to a device or disconnect the headset
from it, scroll to the device, and press the selection key.
Automatic keylock
To turn the automatic key lock on or off, select Auto
keylock. When the automatic key lock is on, the keys are
locked after 30 seconds (when no call is in progress) if the
keys are not pressed during that time. See also “Lock or
unlock the keys,” p. 23.
Language
To select the language for the texts shown on the headset
display, select Language. Scroll to the desired language, and
press the selection key. The language is automatically
HS-72W_UG_en1.fm Page 35 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg24.png)
Menu functions
36
updated from the connected Nokia device if the device
provides the language setting.
Reset
To restore the original settings, select Reset, and press the
selection key to confirm the operation. All the settings that
you have saved (such as radio stations and paired devices)
are deleted. See also “Clear settings or reset,” p. 26.
HS-72W_UG_en1.fm Page 36 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg25.png)
Battery information
37
5. Battery information
This device has an internal, nonremovable, rechargeable
battery. Do not attempt to remove the battery from the
device as you may damage the device. The battery can be
charged and discharged hundreds of times, but it will
eventually wear out. Recharge your battery only with Nokia
approved chargers designated for this device. Use of an
unapproved charger may present a risk of fire, explosion,
leakage, or other hazard.
If a battery is being used for the first time or if the battery
has not been used for a prolonged period, it may be
necessary to connect the charger, then disconnect and
reconnect it to begin charging the battery. If the battery is
completely discharged, it may take several minutes before
the charging indicator appears on the display.
Unplug the charger from the electrical plug and the device
when not in use. Do not leave a fully charged battery
connected to a charger, since overcharging may shorten its
HS-72W_UG_en1.fm Page 37 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg26.png)
Battery information
38
lifetime. If left unused, a fully charged battery will lose its
charge over time.
Always try to keep the battery between 15°C and 25°C (59°F
and 77°F). Extreme temperatures reduce the capacity and
lifetime of the battery. A device with a hot or cold battery
may not work temporarily. Battery performance is
particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode.
Batteries may also explode if damaged.
Never use any charger that is damaged.
HS-72W_UG_en1.fm Page 38 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg27.png)
Care and maintenance
39
Care and maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
following suggestions will help you protect your warranty
coverage.
• Keep the device dry. Precipitation, humidity, and all
types of liquids or moisture can contain minerals that
will corrode electronic circuits. If your device does get
wet, allow it to dry completely.
• Do not use or store the device in dusty, dirty areas. Its
moving parts and electronic components can be
damaged.
• Do not store the device in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device
returns to its normal temperature, moisture can form
inside the device and damage electronic circuit boards.
HS-72W_UG_en1.fm Page 39 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg28.png)
Care and maintenance
40
• Do not attempt to open the device.
• Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device.
• Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
These suggestions apply equally to your device, battery, or
charger. If any device is not working properly, take it to the
nearest authorised service facility for service.
Disposal
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you that all
electrical and electronic products, batteries, and
accumulators must be taken to separate collection at the
end of their working life. This requirement applies to the
European Union and other locations where separate
collection systems are available. Do not dispose of these
products as unsorted municipal waste.
HS-72W_UG_en1.fm Page 40 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg29.png)
Care and maintenance
41
By returning the products to collection you help prevent
uncontrolled waste disposal and promote the reuse of
material resources. More detailed information is available
from the product retailer, local waste authorities, national
producer responsibility organizations, or your local Nokia
representative. For the product Eco-Declaration or
instructions for returning your obsolete product, go to
country-specific information at www.nokia.com.
HS-72W_UG_en1.fm Page 41 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg2a.png)
FCC/Industry Canada notice
42
FCC/Industry Canada notice
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: 1. This
device may not cause harmful interference; and 2. This
device must accept any interference received, including
interference that may cause undesired operation. This
equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
HS-72W_UG_en1.fm Page 42 Wednesday, September 12, 2007 1:48 AM
![](/img.php?id=867317&img=bg2b.png)
FCC/Industry Canada notice
43
of the following measures: Reorient or relocate the
receiving antenna. Increase the separation between the
equipment and receiver. Connect the equipment into an
outlet on a circuit different from that to which the receiver
is connected. Consult the dealer or an experienced radio/TV
technician for help. NOTE: FCC Radiation Exposure
Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. NOTE:
Modifications not expressly approved by Nokia could void
the user's authority to operate the equipment.
HS-72W_UG_en1.fm Page 43 Wednesday, September 12, 2007 1:48 AM