Microsoft LD-3W Bluetooth GPS Receiver User Manual LD 3W en1 with FCC Notice

Microsoft Mobile Oy Bluetooth GPS Receiver LD 3W en1 with FCC Notice

Manual

Download: Microsoft LD-3W Bluetooth GPS Receiver User Manual LD 3W en1 with FCC Notice
Mirror Download [FCC.gov]Microsoft LD-3W Bluetooth GPS Receiver User Manual LD 3W en1 with FCC Notice
Document ID629171
Application IDLRetBbu/9AiNseeBbrB4fQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize33.11kB (413926 bits)
Date Submitted2006-02-16 00:00:00
Date Available2006-02-15 00:00:00
Creation Date2006-01-16 12:57:25
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2006-02-15 15:48:19
Document TitleLD-3W_en1_with_FCC_Notice.fm
Document CreatorPScript5.dll Version 5.2
Document Author: rjp

LD-3W_en1_with_FCC_Notice.fm Page 1 Monday, January 16, 2006 2:56 PM
Nokia Wireless GPS Module
LD-3W User Guide
9246134/1
LD-3W_en1_with_FCC_Notice.fm Page 2 Monday, January 16, 2006 2:56 PM
ENGLISH
DECLARATION OF CONFORMITY
We, NOKIA CORPORATION, declare under
our sole responsibility that the product
LD-3W is in conformity with the
provisions of the following Council
Directive: 1999/5/EC.
A copy of the Declaration of Conformity
can be found from
http://www.nokia.com/phones/
declaration_of_conformity/.
The crossed-out wheeled bin
means that within the European
Union the product must be taken
to separate collection at the
product end-of-life. Do not
dispose of these products as
unsorted municipal waste.
Copyright © 2006 Nokia. All rights
reserved.
Reproduction, transfer, distribution or
storage of part or all of the contents in
this document in any form without the
prior written permission of Nokia is
prohibited.
Nokia is a registered trademark of Nokia
Corporation. Other product and company
names mentioned herein may be
trademarks or tradenames of their
respective owners.
Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Nokia operates a policy of continuous
development. Nokia reserves the right to
make changes and improvements to any
of the products described in this
document without prior notice.
Under no circumstances shall Nokia be
responsible for any loss of data or income
or any special, incidental, consequential or
indirect damages howsoever caused.
The contents of this document are
provided "as is". Except as required by
applicable law, no warranties of any kind,
either expressed or implied, including, but
not limited to, the implied warranties of
merchantability and fitness for a
particular purpose, are made in relation to
the accuracy, reliability or contents of this
document. Nokia reserves the right to
revise this document or withdraw it at any
time without prior notice.
LD-3W_en1_with_FCC_Notice.fm Page 3 Monday, January 16, 2006 2:56 PM
ENGLISH
The availability of particular products may
vary by region. Please check with the
Nokia dealer nearest to you.
Export Controls
This device may contain commodities,
technology or software subject to export
laws and regulations from the US and
other countries. Diversion contrary to law
is prohibited.
For your safety
Read these simple guidelines. Not
following them may be dangerous or
illegal. Read the complete user guide for
further information.
Interference
All wireless devices may be
susceptible to interference,
which could affect performance.
Batteries and chargers
Use only approved batteries and
chargers. Do not connect
incompatible products.
Connecting to other devices
When connecting to any other
device, read its user guide for
detailed safety instructions. Do
not connect incompatible
products.
Qualified service
Only qualified personnel may
repair this device.
Introduction
With the Nokia Wireless GPS Module, you
can determine your current position and
direction easily. The GPS module is a
battery-operated device that uses
Bluetooth wireless technology to
communicate positioning information to
LD-3W_en1_with_FCC_Notice.fm Page 4 Monday, January 16, 2006 2:56 PM
ENGLISH
compatible mobile phones, PCs, PDAs, and
other devices.
To use the GPS module, you need a
compatible software application on the
device that you connect to it.
Read this user guide carefully before using
the GPS module. Check also http://
www.nokia.com/support or your local
Nokia Web site for the latest version of
this guide, additional information,
downloads, and services related to your
Nokia product.
Global positioning system (GPS)
The GPS (global positioning system) is a
worldwide satellite-based radio
navigation system.
A GPS terminal can calculate its location
to an accuracy of 10 meters. The accuracy
depends on the number of satellites, the
signals of which the GPS module receives.
In optimal conditions, the accuracy may
be within a few meters.
The antenna of the GPS module is located
under the Nokia logo, and it should face
upwards. Some car windshields and
windows may contain metal, which may
block or weaken the satellite signals.
If you stand still, GPS cannot detect which
way you are facing, because it determines
your direction on the basis of your
movement.
Note:
The GPS (global positioning
system) is operated by the
United States government, which is solely
responsible for accuracy and maintenance
of the system. The accuracy of location
data can be affected by adjustments to
GPS satellites made by the United States
government and is subject to change with
the United States Department of Defense
civil GPS policy and the Federal
Radionavigation Plan. Accuracy can also
be affected by poor satellite geometry.
Availability and quality of GPS signals may
be affected by buildings and natural
obstacles, as well as weather conditions.
The GPS receiver should only be used
outdoors to allow reception of GPS
signals.
GPS should not be used for precise
location measurement, and you should
never rely solely on location data from the
GPS receiver. This GPS receiver does not
LD-3W_en1_with_FCC_Notice.fm Page 5 Monday, January 16, 2006 2:56 PM
ENGLISH
support location of the phone by
emergency operators.
Get started
Your device may contain small parts. Keep
them out of reach of small children.
Before you can start to use the GPS
module, you must do the following:
• Install a compatible software
application on the phone.
• Charge the battery of the GPS module
fully.
• Pair the compatible phone with the
GPS module.
Some Nokia phone models, such as the
Nokia 9500 Communicator, have a
location privacy setting. To provide GPS
location data to software applications in
the Nokia 9500 Communicator, select
Tools → Control panel → Extras →
Location privacy → Verification policy
→ Accept all.
GPS module parts
The GPS module contains the following
parts shown in Figure 1 at the start of this
guide:
1 - GPS indicator light
2 - Bluetooth indicator light
3 - Battery charge indicator light
4 - Power key
5 - Release button of the back cover
6 - Charger connector
Batteries and chargers
The GPS module has a removable and
rechargeable BL-5C battery. For
availability of approved batteries and
chargers, check with your local dealer.
Check the model number of any charger
before use with this device. This device is
intended for use when supplied with
power from the AC-3, AC-4, and DC-4
chargers.
LD-3W_en1_with_FCC_Notice.fm Page 6 Monday, January 16, 2006 2:56 PM
ENGLISH
Warning! Use only batteries and
chargers approved by Nokia for
use with this particular device.
The use of any other types may
invalidate any approval or
warranty, and may be
dangerous.
When you disconnect the power cord of
any enhancement, grasp and pull the plug,
not the cord.
Install the battery
See Figure 2 at the start of this guide.
1. To open the back cover of the GPS
module, press the release button (1),
and slide the cover away from the
device (2).
2. Insert the battery (3).
3. Close the back cover (4), and slide it in
the direction of the arrow (5) until it
locks into place.
Charge the battery
1. Plug the charger into its connector on
the GPS module.
2. Connect the charger to a power outlet.
During charging, the green or red
indicator light blinks, depending on
whether the GPS module is on (green)
or off (red).
When the battery is fully charged and
the power is on, the green light is
displayed continuously. When the
battery is fully charged and the power
is off, the red light stops to blink.
3. Disconnect the charger from the
power outlet and the GPS module.
When the battery is running out of power,
the red indicator light on the GPS module
starts to blink every 15 seconds. Recharge
the battery.
Basic use
The GPS module should only be used
outdoors to allow reception of GPS
signals.
GPS should not be used for precise
location measurement, and you should
never rely solely on location data from the
LD-3W_en1_with_FCC_Notice.fm Page 7 Monday, January 16, 2006 2:56 PM
ENGLISH
GPS module. Almost all digital
cartography is inaccurate and incomplete
to some extent. Never rely solely on the
cartography provided for use with this
device.
The use of this GPS module requires your
mobile phone to be switched on. Do not
switch on your mobile phone where it may
cause interference or danger.
Switch the GPS module on and off
To switch the GPS module on or off, press
the power key for one second.
When you turn on the GPS module, it
takes some time for the device to position
itself, depending on how long the GPS
module has been turned off, and how well
it can receive the satellite signals. The
start-up time is also longer if the battery
has been removed. In optimal conditions,
the start-up takes about one minute.
Connect with Bluetooth wireless
technology
There may be restrictions on using
Bluetooth technology in some locations.
Check with your local authorities or
service provider.
See the user guide of your phone for a
more detailed description of Bluetooth
wireless technology.
Pair with a compatible phone
Before you can use the GPS module, you
must pair it with a compatible phone.
With some GPS applications, you can pair
and connect the GPS module within the
application without using the Bluetooth
menu of your phone. See the user guide of
the GPS application. If you have previously
connected other GPS devices to your
phone, remove their pairings from the
phone before pairing the GPS module.
To pair the GPS module in the Bluetooth
menu:
1. Make sure the phone and the GPS
module are switched on.
2. Switch on the Bluetooth feature in
your phone, and set the phone to
search for Bluetooth devices as
instructed in the user guide of the
phone.
3. Select the GPS module (Nokia LD-3W)
from the list of found devices.
4. Enter the Bluetooth passcode 0000 to
pair the GPS module with the phone.
LD-3W_en1_with_FCC_Notice.fm Page 8 Monday, January 16, 2006 2:56 PM
ENGLISH
5. Start using the GPS application.
You can pair the GPS module with up to
eight compatible phones, but you can
connect it to only one at a time.
Disconnect the GPS module
To disconnect the GPS module, do one of
the following:
• Disconnect the GPS module in the
application that you used to establish
the connection.
• Switch off the GPS module.
• Disconnect the GPS module in the
Bluetooth menu of the phone.
Check the GPS module status in
the night mode
In some GPS applications, you can set the
GPS module into the night mode. In the
night mode, the indicator lights are only
lit if the GPS module cannot determine its
position, or if the Bluetooth connection is
lost.
To check the GPS module status in the
night mode, press the power key quickly.
The indicator lights appear briefly.
Support for WAAS/EGNOS
The GPS module supports the WAAS/
EGNOS system. To use the system, your
GPS application needs to support it as
well. For details, see the user guide for
your GPS application.
Reset the GPS module
To reset the GPS module, press the power
key for 10 seconds. During resetting, the
green and red indicator lights blink
alternately.
Troubleshooting
If you cannot connect the GPS module to
a compatible phone, proceed as follows:
• Ensure that the Bluetooth feature is
activated on the compatible phone.
• Ensure that the GPS module is
switched on and paired with a
compatible phone.
• Ensure that you ended the previous
Bluetooth connection from the phone.
• Check that the GPS module is within
10 meters of the phone and that there
are no obstructions or electronic
devices between the two.
LD-3W_en1_with_FCC_Notice.fm Page 9 Monday, January 16, 2006 2:56 PM
ENGLISH
Battery information
• Your GPS module is powered by a
rechargeable battery. The full
performance of a new battery is
achieved only after two or three
complete charge and discharge cycles.
The battery can be charged and
discharged hundreds of times, but it
will eventually wear out. When the
talk and standby times are noticeably
shorter than normal, replace the
battery. Use only Nokia approved
batteries, and recharge your battery
only with Nokia approved chargers
designated for this device.
• Unplug the charger from the electrical
plug and the device when not in use.
Do not leave a fully charged battery
connected to a charger, since
overcharging may shorten its lifetime.
If left unused, a fully charged battery
will lose its charge over time.
• Use the battery only for its intended
purpose. Never use any charger or
battery that is damaged.
• Do not short-circuit the battery.
Accidental short-circuiting can occur
when a metallic object, such as a coin,
a clip or a pen, causes direct
connection of the positive (+) and
negative (-) terminals of the battery.
(These look like metal strips on the
battery.) This might happen, for
example, when you carry a spare
battery in your pocket or purse. Shortcircuiting the terminals may damage
the battery or the connecting object.
• Leaving the battery in hot or cold
places, such as in a closed car in
summer or winter conditions, will
reduce the capacity and lifetime of the
battery. Always try to keep the battery
between 15°C and 25°C (59°F and
77°F). A device with a hot or cold
battery may not work temporarily,
even when the battery is fully charged.
Battery performance is particularly
limited in temperatures well below
freezing.
LD-3W_en1_with_FCC_Notice.fm Page 10 Monday, January 16, 2006 2:56 PM
ENGLISH
• Do not dispose of batteries in a fire as
they may explode. Batteries may also
explode if damaged. Dispose of
batteries according to local
regulations. Please recycle when
possible. Do not dispose as household
waste.
Care and maintenance
Your GPS module is a product of superior
design and craftsmanship and should be
treated with care. The suggestions below
will help you protect your warranty
coverage.
• Do not use or store the GPS module in
dusty, dirty areas. Its moving parts and
electronic components can be
damaged.
• Do not store the GPS module in hot
areas. High temperatures can shorten
the life of electronic devices, damage
batteries, and warp or melt certain
plastics.
• Do not store the GPS module in cold
areas. When the device returns to its
normal temperature, moisture can
form inside the device and damage
electronic circuit boards.
• Do not attempt to open the GPS
module other than as instructed in this
guide.
• Do not drop, knock, or shake the GPS
module. Rough handling can break
internal circuit boards and fine
mechanics.
• Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean
the GPS module.
• Do not paint the GPS module. Paint
can clog the moving parts and prevent
proper operation.
If the GPS module is not working properly,
take it to the nearest authorized service
facility for service.
LD-3W_en1_with_FCC_Notice.fm Page 11 Monday, January 16, 2006 2:56 PM
ENGLISH
FCC Notice
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: 1. This device
may not cause harmful interference; and
2. This device must accept any
interference received, including
interference that may cause undesired
operation. This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures: Reorient or relocate
the receiving antenna. Increase the
separation between the equipment and
receiver. Connect the equipment into an
outlet on a circuit different from that to
which the receiver is connected. Consult
the dealer or an experienced radio/TV
technician for help. NOTE: FCC Radiation
Exposure Statement: This equipment
complies with FCC radiation exposure
limits set forth for an uncontrolled
environment. This transmitter must not be
co-located or operating in conjunction
with any other antenna or transmitter.
NOTE: Modifications not expressly
approved by Nokia could void the user's
authority to operate the equipment.
LD-3W_en1_with_FCC_Notice.fm Page 12 Monday, January 16, 2006 2:56 PM
ENGLISH
C Notice
IC
Notice
Operation
is complies
subject to with
the following
This device
Part 15 two
of the
conditions:
FCC Rules. Operation is subject to the
1)this
device
may
not cause 1.
interference
following
two
conditions:
This deviceand
2)this
device
must
accept interference;
any interference,
may not
cause
harmful
and
including
interference
that may
2. This device
must accept
anycause
undesired
operation
of the
device
interference
received,
including
interference that may cause undesired
This
equipment
with
CANADA
operation.
This complies
equipment
has
been tested
RSS-102 Radio Frequency Exposure Limit
and found to comply with the limits for a
set forth for an uncontrolled environment.
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed
This transmitter must not be co-located or
to provide reasonable protection against
operation in conjunction with any other
harmful interference in a residential
antenna or transmitter.
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures: Reorient or relocate
the receiving antenna. Increase the
separation between the equipment and
receiver. Connect the equipment into an
a circuit different from that to
which the receiver is connected. Consult
the dealer or an experienced radio/TV
technician for help. NOTE: FCC Radiation
Exposure Statement: This equipment
complies with FCC radiation exposure
limits set forth for an uncontrolled
environment. This transmitter must not be
co-located or operating in conjunction
with any other antenna or transmitter.
NOTE: Modifications not expressly
approved by Nokia could void the user's
authority to operate the equipment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2006:01:16 12:57:25Z
Modify Date                     : 2006:02:15 15:48:19+08:00
Page Count                      : 12
Creation Date                   : 2006:01:16 12:57:25Z
Mod Date                        : 2006:02:15 15:48:19+08:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : rjp
Metadata Date                   : 2006:02:15 15:48:19+08:00
Creator                         : rjp
Title                           : LD-3W_en1_with_FCC_Notice.fm
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PYALD-3W

Navigation menu