Microsoft NHL-10 GSM 900/1800/1900 Cellular Phone with Bluetooth User Manual r1013 en

Download:
Mirror Download [FCC.gov]
Document ID	354936
Application ID	J48Qpa57rpUzyWoKNjMS5A==
Document Description	Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	151.36kB (1892025 bits)
Date Submitted	2003-09-09 00:00:00
Date Available	2003-09-09 00:00:00
Creation Date	2003-09-02 07:09:26
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2003-09-05 15:05:39
Document Title	r1013_en.book
Document Creator	PScript5.dll Version 5.2
Document Author:	cheer

r1013_en.book Page 81 Tuesday, September 2, 2003 8:07 AM
Tools
To prevent line selection, select Line change→ Disable if supported by
your SIM card. To change this setting, you need the PIN2 code.
Connection settings
General information about data connections and
access points
Access point - The point where your phone connects to the Internet by
way of a data call or packet data connection. An access point can be
provided, for example, by a commercial Internet service provider (ISP),
service provider, or network operator.
To define settings for access points, go to Settings→ Connection→
Access points.
A data connection is required to connect to an access point. Your phone
supports three kinds of data connections:
• a GSM data call ( ),
• GSM high-speed data call (
), or
• packet data (GPRS) connection ( ).
There are three different kinds of access points that you can define:
MMS access point, browser access point, and Internet access point (IAP).
Check with your service provider what kind of an access point is needed
for the service you wish to access. You need to set access point settings,
if you want to, for example,
• send and receive multimedia messages,
• send and receive e-mail,
• download Java™ applications,
• use Image upload, or
• browse pages.
See ‘Data connection indicators’, p. 15.
GSM data calls
A GSM data call enables data transmission rates to a maximum of 14.4
kbps. For availability and subscription to data services, contact your
network operator or service provider.
81
r1013_en.book Page 82 Tuesday, September 2, 2003 8:07 AM
Tools
High speed data call (High Speed Circuit Switched Data, HSCSD)
For availability and subscription to high-speed data services, please
contact your network operator or service provider.
The Settings wizard included in the PC Suite can help you to configure
access point and mailbox settings. You can also copy existing settings,
for example, from your computer to your phone. See the CD-ROM
supplied in the sales package.
Note: Sending data in HSCSD mode may drain the phone’s battery faster
than normal voice or data calls, as the phone may send data more frequently to
the network.
Packet data (General Packet Radio Service, GPRS)
Minimum settings needed to make a packet data connection
• You need to subscribe to the GPRS service. For availability and
subscription to GPRS, contact your network operator or service
provider.
• Go to Settings→ Connection→ Access points and select Options→
New access point→ Use default settings. Fill in the following: Data
bearer: GPRS and Access point name: enter the name given to you by
your service provider. See ‘Creating an access point’, p. 82.
Pricing for packet data and applications
Both the active GPRS connection and the applications used over GPRS
require a fee, for example, using services, sending and receiving data,
and short messages. For more detailed information on fees, contact your
network operator or service provider.
See ‘Viewing the general log’, p. 26. See ‘GPRS data counter’, p. 26.
Creating an access point
Options in the Access points list: Edit, New access point, Delete, Help, and
Exit.
You may have preset access point settings in your phone. Or, you may
receive access point settings over the air from a service provider. See
‘Receiving smart messages’, p. 64.
If there are no access points defined when you open Access points, you
will be asked if you want to create one.
82
r1013_en.book Page 83 Tuesday, September 2, 2003 8:07 AM
Tools
If there already are access points defined, to create a new access point,
select Options→ New access point and select:
• Use default settings to use the default settings. Make the needed
changes and press Back to save the settings.
• Use existing settings to use existing setting information as the basis
for the new access point settings. A list of existing access points is
opened. Select one and press OK. Access point settings are opened
with some fields already filled.
Editing an access point
When you open Access points, the list of
already available access points opens. Scroll
to the access point you want to edit, and
press
Options when editing access point
settings: Change, Advanced settings, Help, and
Exit.
Access points
Here you can see a short explanation for
every setting that may be needed for different data connections and
access points.
Start to fill in the settings from the top because depending on what data
connection you select (Data bearer) only certain setting fields are
available.
• Connection name - Give a descriptive name for the connection.
• Data bearer - The options are GPRS, Data call, and High speed (GSM).
Depending on what data connection you select, only certain setting
fields are available. Fill in all fields marked with Must be defined, or
with an asterisk. Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
Note: To be able to use a data connection, the network service provider
must support this feature, and if necessary, activate it for your SIM card.
• Access point name (for packet data only) - The access point name is
needed to establish a connection to the GPRS network. You obtain
83
r1013_en.book Page 84 Tuesday, September 2, 2003 8:07 AM
Tools
the access point name from your network operator or service
provider.
• Dial-up number (for Data call and High speed (GSM) only) - The
modem telephone number of the access point.
• User name - Write a user name if required by the service provider.
The user name may be needed to make a data connection, and is
usually provided by the service provider. The user name is often casesensitive.
• Prompt password - If you must key in a new password every time you
log on to a server, or if you do not want to save your password to the
phone, choose Yes.
• Password - A password may be needed to make a data connection,
and is usually provided by the service provider. The password is often
case-sensitive. When you are writing the password, the characters
you enter are shown briefly and then changed to asterisks (*). The
easiest way to enter numbers is to press and hold the digit you want
to enter, and then continue entering letters.
• Authentication - Normal / Secure.
• Homepage - Depending on what you are setting up, write either:
• the service address, or
• the address of the multimedia messaging centre.
• Data call type (for GSM data and high speed data only) - Analogue,
ISDN v.110, or ISDN v.120 defines whether the phone uses an
analogue or digital connection. This setting depends on both your
GSM network operator and Internet service provider (ISP), because
some GSM networks do not support certain types of ISDN
connections. For details, contact your ISP. If ISDN connections are
available, they establish connections more quickly than analogue
methods.
• Maximum data speed (for GSM data and high speed data only) - The
options are Automatic / 9600 / 14400 / 19200 / 28800 / 38400 /
43200, depending on what you have chosen in Data call type. This
option allows you to limit the maximum connection speed when
high speed data is used. Higher data rates may cost more, depending
on the service provider.
84
r1013_en.book Page 85 Tuesday, September 2, 2003 8:07 AM
Tools
Note: The speeds above represent the maximum speed at which your
connection will operate. During the connection, the operating speed may be less,
depending on network conditions.
Options→ Advanced settings
• Phone IP address - The IP address of your phone.
• Primary name server - The IP address of the primary DNS server.
• Second. name server - The IP address of the secondary DNS server.
• Proxy serv. address - The IP address of the proxy server.
• Proxy port number - The port number of the proxy server.
If you need to enter these settings, contact your Internet service
provider.
The following settings are shown if you have selected data call and high
speed data as the connection type:
• Use callback - This option allows a server to call you back once you
have made the initial call. Contact your service provider to subscribe
to this service.
Note: Charges may apply for certain types of received calls, such as
roaming and high speed data calls. Contact your GSM network operator for more
information.
Note: The phone expects the callback call to use the same data call
settings that were used in the callback-requesting call. The network must
support that type of call in both directions, to and from the phone.
• Callback type - The options are Use server no. / Use other no.. Ask
your service provider for the correct setting to use; it will depend on
the service provider’s configuration.
• Callback number - Key in your phone’s data phone number which the
dial back server uses. Usually, this number is the data call phone
number of your phone.
• Use PPP compression - When set to Yes, this option speeds up the
data transfer, if supported by the remote PPP server. If you have
problems with establishing a connection, try setting this to No.
Contact your service provider for guidance.
• Use login script - The options are Yes / No.
• Login script - Insert the login script.
85
r1013_en.book Page 86 Tuesday, September 2, 2003 8:07 AM
Tools
• Modem initialisation (Modem initialisation string)- Controls your
phone using modem AT commands. If required, enter characters
specified by your service provider or Internet service provider.
GPRS
Go to Settings→ Connection→ GPRS.
The GPRS settings affect all access points using a packet data
connection.
GPRS connection - If you select When available and you are in a
network that supports packet data, the phone registers to the GPRS
network and sending short messages will be done via GPRS. Also,
starting an active packet data connection, for example, to send and
receive e-mail, is quicker. If you select When needed, the phone will use
a packet data connection only if you start an application or action that
needs it. The GPRS connection can be closed after it is not used by any
application.
If there is no GPRS coverage and you have chosen When available, the
phone will periodically try to establish a packet data connection.
Access point - The access point name is needed when you want to use
your phone as a packet data modem to your computer. See ‘Using
your phone as a modem’, p. 129.
Data call
Go to Settings→ Connection→ Data call.
The Data call settings affect all access points using a data call and high
speed data call.
Online time - If there are no actions the data call is dropped
automatically after a time-out period. The options are User defined, in
which case you enter a time, or Unlimited.
Date and time
The Date and time settings allow you to define the date and
time used in your phone, as well as change the date and time format and
separators.
• Clock type→ Analogue or Digital - to change the clock shown in
standby mode. See ‘Clock’, p. 107.
86
r1013_en.book Page 87 Tuesday, September 2, 2003 8:07 AM
Tools
• Clock alarm tone - to change the tone played when the clock alarm
time is reached.
• Auto time update - to allow the network to update time, date, and
time zone information to your phone (network service). For the Auto
time update setting to take effect, the phone needs to be restarted.
Check any alarms as these may be affected by Auto time update.
• GMT offset - to change the time zone for the clock time.
• Daylight-saving - to set daylight saving time on or off.
Security
Phone and SIM
Explanations for the different security codes that may be needed:
• PIN code (4 to 8 digits) - The PIN (Personal Identification Number)
code protects your SIM card against unauthorised use. The PIN code
is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the PIN code is
blocked. If the PIN code is blocked, you need to unblock the PIN code
before you can use the SIM card again. See the information about
the PUK code.
• PIN2 code (4 to 8 digits) - The PIN2 code, supplied with some SIM
cards, is required to access some functions.
• Lock code (5 digits) - The lock code can be used to lock the phone
and keypad to avoid unauthorised use.
Note: The factory setting for the lock code is 12345. To avoid
unauthorised use of your phone, change the lock code. Keep the new code secret
and in a safe place separate from your phone.
• PUK and PUK2 codes (8 digits) - The PUK (Personal Unblocking Key)
code is required to change a blocked PIN code. The PUK2 code is
required to change a blocked PIN2 code. If the codes are not supplied
with the SIM card, contact the operator whose SIM card is in your
phone for the codes.
You can change the following codes: lock code, PIN code, and PIN2
code. These codes can only include the numbers from 0 to 9.
87
r1013_en.book Page 88 Tuesday, September 2, 2003 8:07 AM
Tools
Note: Avoid using access codes similar to emergency numbers, such as
112, to prevent accidental dialling of the emergency number.
PIN code request - When the PIN code request is active, the code is
requested each time the phone is switched on. Note that deactivating
the PIN code request may not be allowed by some SIM cards.
PIN code / PIN2 code / Lock code - Open this setting if you want to
change the code.
Autolock period - You can set an autolock period, a time-out after which
the phone is automatically locked and can be used only if the correct
lock code is entered. Key in a number for the time-out in minutes or
select None to turn off the autolock period.
• To unlock the phone, key in the lock code.
Note: When the phone is locked, calls may be possible to the emergency
number programmed into your phone (e.g. 112 or other official emergency
number).
Lock if SIM changed - Select Yes if you want the phone to ask for the
lock code when an unknown, new SIM card is inserted into your phone.
The phone maintains a list of SIM cards that are recognised as the
owner’s cards.
Fixed dialling - You can restrict your outgoing calls to selected phone
numbers, if supported by your SIM card. You need the PIN2 code for this
function. When this function is active, you can only call those phone
numbers that are included in the fixed dialling list or which begin with
the same digit(s) as a phone number on the list.
• Press
to set Fixed dialling on.
Options in the Fixed dialling view: Open, Call, Activ. fixed dialling/Deact.
fixed dialling, New contact, Edit, Delete, Add to Contacts, Add from Contacts,
Find, Mark/Unmark, Help, and Exit.
Note: When Fixed Dialling is set on, calls may be possible to certain
emergency numbers in some networks (e.g. 112 or other official emergency
number).
• To add new numbers to the Fixed dialling list, select Options→ New
contact or Add from Contacts.
Closed user group (network service) - You can specify a group of people
to whom you can call and who can call you. For more information,
88
r1013_en.book Page 89 Tuesday, September 2, 2003 8:07 AM
Tools
contact your network operator or service provider. Select: Default to
activate the default group agreed on with the network operator, On if
you want to use another group (you need to know the group index
number), or Off.
Note: When calls are limited to Closed User Groups, calls may be possible
to certain emergency numbers in some networks (e.g. 112 or other official
emergency number).
Confirm SIM services (network service) - To set the phone to display
confirmation messages when you are using a SIM card service.
Delete server - To reset your connection settings allowing you to receive
new settings from your service provider.
Certif. management
In the Certificate management main view, you can see a list of authority
certificates that have been stored in your phone. Press
to see a list
of personal certificates, if available.
Authority certificates are used by some browser services, such as
banking services, for checking signatures or server certificates or other
authority certificates.
Digital certificates are used to verify the origin of browser pages and
installed software. However, they can only be trusted if the origin of the
certificate is known to be authentic.
Options in the certificate management main view: Certificate details,
Delete, Trust settings, Mark/Unmark, Help, and Exit.
Digital certificates may be needed when you, for example:
• want to connect to an online bank or another site or remote server
for actions that involve transferring confidential information, or
• want to decrease the risk of viruses or other malicious software and
be sure of the authenticity of software when downloading and
installing software.
Important: Even if the use of certificates makes the risks involved in
remote connections and software installation considerably smaller, they must be
used correctly in order to benefit from increased security. The existence of a
certificate does not offer any protection by itself; the certificate manager must
contain correct, authentic, or trusted certificates for increased security to be
available.
89
r1013_en.book Page 90 Tuesday, September 2, 2003 8:07 AM
Tools
Important: Certificates have a restricted lifetime. If Expired certificate or
Certificate not valid yet is shown even if the certificate should be valid, check
that the current date and time in your phone are correct.
Changing the trust settings of an authority certificate
• Scroll to an authority certificate and select Options→ Trust settings.
Depending on the certificate, a list of the applications that can use
the selected certificate is shown. For example:
Application manager / Yes - the certificate is able to certify the
origin of new software.
Internet / Yes - the certificate is able to certify e-mail and imaging
servers.
Important: Before changing these settings, you must make sure that you
really trust the owner of the certificate and that the certificate really belongs to
the listed owner.
Call barring (network service)
Call barring allows you to restrict the making and receiving of
calls with your phone. For this function, you need the barring
password, which you can obtain from your service provider.
1. Scroll to one of the barring options.
2. Select Options→ Activate to request the network to set call
restriction on, Cancel to set the selected call restriction off, or Check
status to check if the calls are barred or not.
• Select Options→ Edit barrings passw. to change the barring
password.
• Select Options→ Cancel all barrings to cancel all active call barrings.
Note: When calls are barred, calls may be possible to certain emergency
numbers in some networks (e.g. 112 or other official emergency number).
Note: Call barring affects all calls, including data calls.
Note: You cannot have barring of incoming calls and call diverting or
fixed dialling active at the same time. See ‘Settings for call diverting’, p. 24. See
‘Security’, p. 87.
90
r1013_en.book Page 91 Tuesday, September 2, 2003 8:07 AM
Tools
Network
Operator selection
• Choose Automatic to set the phone to automatically search for and
select one of the cellular networks available in your area, or
• Choose Manual, if you want to select the desired network manually
from a list of networks. If the connection to the manually selected
network is lost, the phone will sound an error tone and ask you to
select a network again. The selected network must have a roaming
agreement with your home network, that is, the operator whose SIM
card is in your phone.
Cell info display
• Select On to set the phone to indicate when it is used in a cellular
network based on Micro Cellular Network (MCN) technology and to
activate cell info reception.
Enhancement settings
Indicators shown in standby mode:
- a headset is connected.
- a loopset is connected.
Scroll to an enhancement folder and open the settings:
• Select Default profile to select the profile you want to be activated
each time when you connect a certain enhancement to your phone.
See ‘Changing the profile’, p. 96.
• Select Automatic answer to set the phone to answer an incoming
call automatically after five seconds time. If the Incoming call alert is
set to Beep once or Silent, automatic answer cannot be used, and you
must answer the phone manually.
Note: If you are using a loopset, you need to activate it separately.If you
have activated a loopset, the headset will use the same settings as the loopset.
■ File manager
Go to Menu→ Tools→ File manager
91
r1013_en.book Page 92 Tuesday, September 2, 2003 8:07 AM
Tools
In File manager you can browse, open, and
manage files and folders in the phone
memory or on the memory card, if you use
one.
Open File manager to see a list of the folders
in the phone memory. Press
to see the
folders on the memory card, if you use one.
Options in the File manager main view:
Open, Send, Delete, Move to folder, Copy to folder,
New folder, Mark/Unmark, Rename, Find, Receive
via infrared, View details, Memory details, Help, and Exit.
You can browse, open, and create folders, mark, copy and move items to
folders. See ‘Actions common to all applications’, p. 17.
Finding files
You can search for files and folders in the phone memory or memory
card, if you use one, by entering a search text. See ‘Searching for items’,
p. 18.
Receiving files via Infrared
Files are automatically received to the root level of the folder structure.
Move or copy them to other folders.
• Select Options→ Receive via infrared. See ‘Sending and receiving
data via infrared’, p. 126.
Viewing memory consumption
If you have a memory card installed on your phone, you will have a
choice of two memory views, one for the phone memory and one for the
memory card.
Press
or
to move from one memory tab to another.
• To check memory consumption of the current memory select
Options→Memory details.
The phone calculates the approximate amount of free memory for
storing data and installing new applications.
92
r1013_en.book Page 93 Tuesday, September 2, 2003 8:07 AM
Tools
In the memory views, you can view the memory consumption of the
different data groups: Calendar, Contacts, Documents, Messages,
Images, Sound files, Video clips, Applications, Mem. in use, and Free
memory.
Note: If the phone memory is getting low, remove some files, or move
them to the memory card. See ‘Troubleshooting’, p. 132.
■ Voice commands
Go to Menu→ Tools→ Voice commands.
You can use Voice commands to start applications and
profiles, and to dial numbers from Contacts, without having to look at
your phone’s display. You record a word, or words, (voice command) and
then say this voice command to open an application, activate a profile,
or dial a number.
Note: You can have only one voice command per item.
Options in the Voice commands main view: Add voice command, Open,
New application, Playback, Change, Delete, Delete all, Help, and Exit.
Any spoken word(s) can be a voice command.
• When recording, hold the phone at a short distance away from your
mouth. After the starting tone, say clearly the word, or words, you
want to record as a voice command.
Before using voice commands, note that:
• Voice commands are not language dependent. They are dependent on the
speaker's voice.
• Voice commands are sensitive to background noise. Record and use them in a
quiet environment.
• Very short voice commands are not accepted. Use longer words and avoid
similarities between different voice commands.
Note: You must say the voice command exactly as you said it when you
recorded it. This may be difficult in, for example, a noisy environment or during
an emergency, so you should not rely solely upon voice commands in all
circumstances.
93
r1013_en.book Page 94 Tuesday, September 2, 2003 8:07 AM
Tools
Adding a voice command to an application
1. In the Voice commands main view, scroll
to the application that you want to add a
voice command to, and select Options→
Add voice command.
Note: To add a voice command to a
profile, the Profiles folder must be opened and
a specific profile selected.
2. The text Press ’Start’, then speak after
tone is displayed.
• Press Start to record a voice
command. The phone sounds a starting tone and the note Speak
now is displayed.
3. Say the voice command. The phone will stop recording after
approximately 5 seconds.
4. After recording, the phone plays the recorded command and the note
Playing voice command is displayed. If you do not want to save the
recording, press Quit.
5. When the voice command has been successfully saved, the note
Voice command saved is displayed and a beep sounds. A symbol
can be seen next to the application.
Adding an application to the list
Assign voice commands to other applications that are not listed in the
Voice commands main view.
1. In the Voice commands main view, select Options→ New
application.
2. Available applications are displayed. Scroll to the application that
you want to add and press Select.
3. Add a voice command to the new application. See ‘Adding a voice
command to an application’, p. 94.
Starting an application using a voice command
1. In standby mode, press and hold
note Speak now is displayed.
94
. A short tone is played and the
r1013_en.book Page 95 Tuesday, September 2, 2003 8:07 AM
Tools
2. When you are starting an application by saying a voice command,
hold the phone at a short distance away from your mouth and say
the voice command clearly.
3. The phone plays the original voice command and starts the
application.
• If the phone plays the wrong voice command, press Retry.
Replaying, erasing, or changing a voice command
To replay, erase, or change a voice command, scroll to the item that has
a voice command (indicated by ), select Options, and then either:
• Playback - to listen to the voice command again, or
• Delete - to erase the voice command, or
• Change - to record a new voice command. Press Start to record.
95
r1013_en.book Page 96 Tuesday, September 2, 2003 8:07 AM
Personalisation
7. Personalisation
■ Profiles
Go to Menu→ Profiles.
In Profiles, you can adjust and customise the
phone tones for different events,
environments, or caller groups. There are five
preset profiles: General, Silent, Meeting,
Outdoor, and Pager, which you can
customise to meet your needs.
You can see the currently selected profile at
the top of the display in standby mode. If the
General profile is in use, only the current
date is shown.
The tones can be default ringing tones, tones recorded in Recorder,
tones received in a message, or transferred to your phone via infrared,
Bluetooth, or a PC connection and then saved to your phone or memory
card, if you use one.
Changing the profile
1. Go to Menu→ Profiles. A list of profiles opens.
2. In the Profiles list, scroll to a profile and select Options→ Activate.
To change the profile in standby mode, press
you want to activate and press OK.
96
, scroll to the profile
r1013_en.book Page 97 Tuesday, September 2, 2003 8:07 AM
Personalisation
Customising profiles
1. To modify a profile, scroll to the profile in
the Profiles list and select Options→
Personalise. A list of profile settings
opens.
2. Scroll to the setting you want to change
and press
to open the choices:
• Ringing tone - To set the ringing tone for
voice calls, choose a ringing tone from
the list. When you scroll through the list,
you can stop on a tone to listen to it
before you make your selection. Press any key to stop the sound. If a
memory card is used, tones stored on it have the
icon next to the
tone name. Ringing tones use shared memory. See ‘Shared memory’,
p. 20. You can also change ringing tones in Contacts. See ‘Adding a
ringing tone for a contact card or group’, p. 32.
• Ringing type - When Ascending is selected, the ringing volume starts
from level one and increases level by level to the set volume level.
• Ringing volume - To set the volume level for the ringing and message
alert tones.
• Message alert tone - To set the tone for messages.
• Chat alert tone - To set the tone for instant messages.
• Vibrating alert - To set the phone to vibrate at incoming voice calls
and messages.
• Keypad tones - To set the volume level for keypad tones.
• Warning tones - The phone sounds a warning tone, for example,
when the battery is running out of power.
• Alert for - To set the phone to ring only upon calls from phone
numbers that belong to a selected contact group. Phone calls coming
from people outside the selected group will have a silent alert. The
choices are All calls / (list of contact groups, if you have created
them). See ‘Creating contact groups’, p. 33.
• Profile name - You can rename a profile and give it any name you
want. The General profile cannot be renamed.
97
r1013_en.book Page 98 Tuesday, September 2, 2003 8:07 AM
Personalisation
■ Themes
Go to Menu→ Themes
In Themes you can change the look of your
phone’s display by activating a theme. A
theme can include the idle screen wallpaper,
colour palette, screen saver, and icons and
background image in ’Go to’. Edit a theme
for more detailed personalisation.
When you open Themes you will see a list of
the available themes. The currently active
theme is indicated by a check mark. Press
to see the themes on the memory card,
if you use one.
Options in the Themes main view: Preview, Apply, Edit, Copy to mem.
card, Copy to phone mem., Theme downloads, Help, and Exit.
• To preview a theme, scroll to the theme and select Options→
Preview to view the theme. Press
to activate the theme. You can
activate the theme without previewing it by selecting Options→
Apply from the main view.
Editing themes
Group together elements from other themes, or images from the Gallery
to personalise themes further.
1. Scroll to a theme, select Options→ Edit, and select:
• Wallpaper - To select an image from one of the available themes,
or select your own image from the Gallery, to use as a background
image in standby mode.
• Colour palette - To change the colour palette used on the display.
98
r1013_en.book Page 99 Tuesday, September 2, 2003 8:07 AM
Personalisation
• Screen saver - To select what is shown
on the screen saver bar: the time and
date or a text you have written
yourself. The location and background
colour of the screen saver bar changes
in one minute intervals. Also, the
screen saver changes to indicate the
number of new messages or missed
calls. You can set the time that
elapses before the screen saver is
activated. See ‘Phone settings’, p. 78.
• Icons- To select a different icon set from any one of the themes.
Note: All pre-installed themes have the same icon set.
• Image in ’Go to’ - To select an image from one of the available
themes, or select your own image from the Gallery, to use as a
background image in Go to.
2. Scroll to the element to edit and select Options→ Change.
3. Select Options→ Set to select the current setting. You can also
preview the selected element by selecting Options→ Preview. Note
that you cannot preview all elements.
Restoring themes
To restore the currently selected theme back to its original settings,
select Options→ Restore orig. theme when editing a theme.
■ Go to
Press Go to in standby mode or go to Menu→ Go to.
99
r1013_en.book Page 100 Tuesday, September 2, 2003 8:07 AM
Personalisation
Use Go to for storing shortcuts, links to your
favourite photos, video clips, notes, Recorder
sound files, browser bookmarks, and saved
browser pages.
The default shortcuts:
- opens the Notes
editor,
- opens the Calendar to the
current date,
- opens the Messaging
Inbox.
Options in the Go to main view: Open, Edit
shortcut name, Shortcut icon, Delete shortcut,
Move, List view / Grid view, Help, and Exit.
Adding shortcuts
Shortcuts can be added only from pre-installed applications and
functions. Not all applications have this functionality.
1. Open the application and scroll to the item that you want to add as a
shortcut to Go to.
2. Select Options→ Add to ’Go to’ and press OK.
Note: A shortcut in Go to is automatically updated if you move the item
it is pointing to, for example, from one folder to another.
Using shortcuts:
• To open a shortcut, scroll to the icon and press
opened in the corresponding application.
. The file is
• To delete a shortcut, scroll to the shortcut you want to remove and
select Options→ Delete shortcut. Removing a shortcut does not
affect the file it is referring to.
• To change the shortcut name, select Options→ Edit shortcut name.
Write the new name. This change affects only the shortcut, not the
file or item the shortcut refers to.
100
r1013_en.book Page 101 Tuesday, September 2, 2003 8:07 AM
Extras
8. Extras
■ Wallet
Go to Menu→ Extras→ Wallet.
Wallet provides you with a storage area for
your personal information, such as credit
and debit card numbers, addresses and other
useful data, for example, user names and
passwords.
The information stored in the wallet can be
easily retrieved while browsing to
automatically fill in online forms on browser
pages, for example, when the service asks for
credit card details. Data in the wallet is
encrypted and protected with a wallet code that you define.
You can group wallet data into profiles that can be accessed, for
example for making purchases online.
Due to the nature of the wallet, it will automatically close after 5
minutes. Enter the wallet code to regain access to the contents. You can
change this automatic time-out period, if required. See ‘Wallet settings’,
p. 104.
Options in the wallet main view:Open, Settings, Help, and Exit.
Entering the wallet code
Each time you open the wallet you will be prompted for a wallet code.
Enter the code that you have created and press OK.
When you open the wallet for the first time, you must create your own
access code:
1. Enter a code of your choice (4 - 10 alphanumeric characters), and
press OK.
2. You will be prompted to verify the code. Enter the same code and
press OK. Do not give your wallet code to anyone else.
101
r1013_en.book Page 102 Tuesday, September 2, 2003 8:07 AM
Extras
Note: If you enter the wallet code incorrectly on three consecutive
occasions, the wallet application is blocked for five minutes. The block time
increases if further incorrect wallet codes are entered.
Important: If you forget your wallet code, you will have to reset the code,
and you will lose all information stored in the wallet. See ‘Resetting the wallet
and wallet code’, p. 104.
Storing personal card details
1. Select the Cards category from the main wallet menu and press
2. Select a type of card from the list and press
• Payment cards - Credit and debit cards
• Loyalty cards - Membership and store cards
• Online acc. cards - Personal user names and passwords to online
services
• Address cards - Basic contact details for home/office
• User info cards - Customised personal preferences for online
services
3. Select Options→ Create new. An empty form opens.
4. Fill in the fields and press Done.
You can also receive card information directly to the phone from a card
issuer or service provider (if they offer this service). You will be notified
which category the card belongs to. Save or discard the card. You can
view and rename a saved card, but you cannot edit it.
You can open, edit or delete the fields in the card. Any changes will be
saved upon exiting.
Options when viewing or editing card details: Delete, Help, and Exit.
Creating personal notes
Personal notes are a means of storing sensitive information, for
example, a bank account number. You can access the data in a personal
note from the browser. You can also send a note as a message.
• Select the Personal notes category from the main wallet menu and
press
102
r1013_en.book Page 103 Tuesday, September 2, 2003 8:07 AM
Extras
• Select Options→ Create new. An empty note opens.
• Press
to start writing. Press
Press Done to save.
to clear characters.
Creating a wallet profile
Once you have stored your personal details, you can combine them
together into a wallet profile. Use a wallet profile to retrieve wallet data
from different cards and categories to the browser.
1. Select the Wallet profiles category from the main wallet menu and
press
2. Select Options→ Create new. A new wallet profile form opens.
3. Fill in the fields as indicated below and press Done.
Some of the fields must contain data selected from the wallet. You
must save the data under the relevant category before creating a
wallet profile, or the profile cannot be created.
• Profile name - Choose and enter a name for the profile.
• Payment card - Select a card from the Payment card category.
• Loyalty card - Select a card from the Loyalty card category.
• Online access card - Select a card from the Online acc. card
category.
• Shipping address - Select an address from the Address card
category.
• Billing address - By default this is the same as the Shipping
address. If you require a different address, select one from the
Address card category.
• User info card - Select a card from the User info card category.
• Receive e-receipt - Select a destination from the Address card
category.
• Deliver e-receipt - Select To phone, To e-mail, or To pho. & e-mail.
• Phone ID sending - Set to On or Off. Defines whether, or not, your
unique phone identification is sent with the wallet profile (for
future development dependent on RFID-based ticketing).
103
r1013_en.book Page 104 Tuesday, September 2, 2003 8:07 AM
Extras
Retrieving information from wallet to your browser
When using online mobile services supporting the wallet functionality,
you can upload the data stored in your wallet to automatically enter
your details into an online form. For example, by uploading your
payment card details you do not need to key in the card number and
expiry date each time you need them (depending on the content being
browsed). Also, you can retrieve your user name and password stored as
an access card when connecting to a mobile service that requires
authentication. See ‘Purchasing an item’, p. 116.
Viewing ticket details
You can receive notifications of tickets purchased online via the
browser. Received notifications are stored in the wallet. To view the
notifications:
1. Select the Tickets category from the main wallet menu and press
2. Select Options→ View.
Note: None of the fields within the notification can be modified.
Wallet settings
Select Options→ Settings from the main wallet menu:
• Wallet code - Change your wallet code. You will be prompted to
enter the current code, create a new code, and verify the new code.
• Phone ID - Set the phone ID code, type, and sending options (for
future development dependent on RFID-based ticketing).
• Automatic close - Change the automatic time-out period (1 - 60
minutes). After the time-out period has elapsed, the wallet code
must be re-entered to gain access to the contents.
Resetting the wallet and wallet code
To reset both the contents of the wallet and the wallet code:
1. Key in *#7370925538# in standby mode.
2. Enter the phone’s lock code, and press OK. See ‘Security’, p. 87.
104
r1013_en.book Page 105 Tuesday, September 2, 2003 8:07 AM
Extras
3. You will be asked to confirm the erasing of data. Press OK.
Note: This operation erases all contents of the wallet.
When opening the wallet again, you must enter a new wallet code. See
‘Entering the wallet code’, p. 101.
■ Calculator
Go to Menu→ Extras→ Calculator
Options in Calculator: Last result, Memory, Clear screen, Help,
and Exit.
1. Enter the first number of your calculation. Press
mistake in the number.
2. Scroll to an arithmetic function and press
to erase a
to select it.
3. Enter the second number.
4. To execute the calculation, scroll to
and press
Note: The Calculator has limited accuracy and rounding errors may
occur, especially in long divisions.
• To add a decimal, press
• Press and hold
• Use
sheet.
and
to clear the result of the previous calculation.
to view previous calculations and move in the
■ Converter
Go to Menu→ Extras→ Converter.
In Converter, you can convert measures such as Length from
one unit to another, for example, Yards to Metres.
Note: The Converter has limited accuracy and rounding errors may occur.
Converting units
Options in Converter : Conversion type, Currency rates (not applicable to
other units), Help, and Exit.
Note: To make currency conversion you must first set the exchange
rate..See ‘Setting a base currency and exchange rates’, p. 106.
105
r1013_en.book Page 106 Tuesday, September 2, 2003 8:07 AM
Extras
1. Scroll to the Type field and press
to open a list of measures.
Scroll to the measure you want to use and press OK.
2. Scroll to the first Unit field and press
to open a list of available
units. Select the unit from which you want to convert and press OK.
3. Scroll to the next Unit field and select the unit to which you want to
convert.
4. Scroll to the first Amount field and key in the value you want to
convert. The other Amount field changes automatically to show the
converted value.
Press
to add a decimal and press
and E (exponent) symbols.
for the +, - (for temperature),
Note: The conversion order changes if you write a value in the second
Amount field. The result is shown in the first Amount field.
Setting a base currency and exchange rates
Before you can make currency conversions, you need to choose a base
currency (usually your domestic currency) and add exchange rates.
Note: The rate of the base currency is always 1. The base currency
determines the conversion rates of the other currencies.
1. Select Currency as the measure type and select Options→ Currency
rates. A list of currencies opens and you can see the current base
currency at the top.
2. To change the base currency, scroll to the currency (usually your
domestic currency), and select Options→ Set as base curr..
Important: When you change the base currency, all previously set
exchange rates are set to 0 and you need to key in new rates.
3. Add exchange rates, scroll to the currency, and key in a new rate,
that is, how many units of the currency equal one unit of the base
currency you have selected.
4. After you have inserted all the needed exchange rates, you can make
currency conversions. See ‘Converting units’, p. 105.
■ Notes
Go to Menu→ Extras→ Notes.
106
r1013_en.book Page 107 Tuesday, September 2, 2003 8:07 AM
Extras
You can link notes to Go to and send them to other devices. Plain text
files (TXT format) you receive can be saved to Notes.
• Press
Done to save.
to start to write. Press
to clear letters. Press
■ Clock
Go to Menu→ Extras→ Clock.
Changing clock settings
Options in Clock: Set alarm, Reset alarm, Remove alarm, Settings, Help,
and Exit.
• To change the time or date, select Options→ Settings in Clock.
Setting an alarm
1. To set a new alarm, select Options→ Set alarm.
2. Enter the alarm time and press OK. When the alarm is active, the
indicator is shown.
• To cancel an alarm, go to clock and select Options→ Remove alarm.
Turning off the alarm
• Press Stop to turn off the alarm.
• Press any key or Snooze to stop the alarm for five minutes, after
which it will resume. You can do this a maximum of five times.
If the alarm time is reached while the phone is switched off, the phone switches
itself on and starts sounding the alarm tone. If you press Stop, the phone asks
whether you want to activate the phone for calls. Press No to switch off the
phone or Yes to make and receive calls.
Note: Do not press Yes when wireless phone use is prohibited or when it
may cause interference or danger.
Personalising the alarm tone
1. To personalise the alarm tone, select Options→ Settings.
2. Scroll to Clock alarm tone and press
107
r1013_en.book Page 108 Tuesday, September 2, 2003 8:07 AM
Extras
3. When you scroll through the list of tones, you can stop on a tone to
listen to it before you make your selection. Press Select to select the
current tone.
■ Recorder
Go to Menu→ Extras→ Recorder.
The voice recorder allows you to record telephone
conversations and voice memos. If you are recording a telephone
conversation, both parties will hear a tone every five seconds during
recording.
Recorded files are stored in the Gallery. See ‘Gallery’, p. 47.
Options in Recorder: Record sound clip, Delete, Rename sound clip, Send,
Go to Gallery, Settings, Add to ’Go to’, Help, and Exit.
Note: Obey all local laws governing recording of calls. Do not use this
feature illegally.
• Select Options→ Record sound clip and scroll to a function and press
to select it. Use:
- to record,
- to pause,
- to stop,
- to fast forward,
- to fast rewind, or
- to play an
opened sound file.
■ Games
Go to Menu→ Games.
• To start a game, scroll to the game icon and press
. For
instructions on how to play the game, press Options→ Help.
■ Memory card
For details on inserting a memory card into the phone, see the
Getting Started guide.
Details of how you can use the memory card with other
features and applications of your phone are given in the sections
describing these features and applications.
Options in the memory card: Backup phone mem., Restore from card,
Format mem. card, Memory card name, Set password, Change password, Remove
password, Unlock memory card, Memory details, Help, and Exit.
108
r1013_en.book Page 109 Tuesday, September 2, 2003 8:07 AM
Extras
If you have a memory card, you can use it to store your multimedia files
such as video clips and sound files, photos, messaging data, and to
backup information from your phone’s memory.
Important: Keep all memory cards out of the reach of small children.
Note: Not all memory cards are compatible with this phone. Data stored
on a memory card using another device may be corrupted when you try to use it
in this phone.
Format memory card
Important: All data stored on the memory card will be permanently
deleted when you format it.
You must format a new memory card before you can use it for the first
time.
• Select Options→ Format mem. card.
You will be asked to confirm your request and once you confirm,
formatting starts.
Backing up and restoring information
To back up information from your phone’s memory to the memory card,
select Options→ Backup phone mem..
To restore information from the memory card to the phone’s memory,
select Options→ Restore from card.
Note: You can only backup the phone memory and restore it to the same
model of phone.
Memory card password
To set a password to lock your memory card against unauthorised use,
select Options→ Set password.
You will be asked to enter and confirm your password. The password can
be up to eight characters long.
Note: The password is stored in your phone and you don’t have to enter it
again while you are using the memory card on the same phone. If you want to use
the memory card on another phone, you will be asked for the password.
109
r1013_en.book Page 110 Tuesday, September 2, 2003 8:07 AM
Extras
Unlocking a memory card
If you insert another password protected memory card in your phone,
you will be prompted to enter the password of the card. To unlock the
card:
• Select Options→ Unlock memory card.
Note: Once the password is removed, the memory card is unlocked and
can be used on another phone without a password.
Checking memory consumption
You can check the memory consumption of different data groups and
the available memory for installing new applications or software on
your memory card:
• Select Options→ Memory details.
110
r1013_en.book Page 111 Tuesday, September 2, 2003 8:07 AM
Services and Applications
9. Services and Applications
■ Services (Mobile browser)
Go to Menu→ Services or press and hold
mode.
in standby
Various service providers maintain pages specifically
designed for mobile phones, offering services that can be, for example,
news, weather reports, banking, travel information, entertainment, and
games. With the mobile browser you can view these services as WAP
pages written in WML, XHTML pages written in XHTML, or a mixture of
both.
Note: Check the availability of services, pricing, and tariffs with your
network operator and/or service provider. Service providers will also give you
instructions on how to use their services.
Basic steps for accessing
• Save the settings that are needed to
access the browser service that you want
to use. See ‘Setting up the phone for the
browser service’, p. 111.
• Make a connection to the service. See
‘Making a connection’, p. 112.
• Start browsing the web pages. See
‘Browsing’, p. 114.
• End the connection to the service. See
‘Ending a connection’, p. 117.
Setting up the phone for the browser service
Receiving settings in a smart message
You may receive service settings in a special text message, a so-called
smart message, from the network operator or service provider that
offers the service. See ‘Receiving smart messages’, p. 64. For more
111
r1013_en.book Page 112 Tuesday, September 2, 2003 8:07 AM
Services and Applications
information, contact your network operator or service provider, or visit
Nokia.com (www.nokia.com).
Settings may be available, for example, on the website of a network
operator or service provider.
Keying in the settings manually
Follow the instructions given to you by your service provider.
1. Go to Settings→ Connection settings→ Access points and define the
settings for an access point. See ‘Connection settings’, p. 81.
2. Go to Services→ Options→ Add bookmark. Write a name for the
bookmark and the address of the browser page defined for the
current access point.
Making a connection
Once you have stored all the required connection settings, you can
access browser pages.
There are three different ways to access browser pages:
• Select the homepage (
) of your service provider,
• Select a bookmark from the Bookmarks view, or
• Press the keys
to start to write the address of a browser
service. The Go to field at the bottom of the display is immediately
activated and you can continue writing the address there.
After you have selected a page or written the address, press
to start
to download the page. See ‘Data connection indicators’, p. 15.
Viewing bookmarks
Note: Your phone may have some pre-installed bookmarks for sites not
affiliated with Nokia. Nokia does not warrant or endorse these sites. If you
choose to access them, you should take the same precautions, for security or
content, as you would with any site.
In the Bookmarks view, you can see bookmarks pointing to different
kinds of browser pages. Bookmarks are indicated by the following icons:
112
r1013_en.book Page 113 Tuesday, September 2, 2003 8:07 AM
Services and Applications
- The starting page defined for the browser access point. If you use
another browser access point for browsing, the starting page is changed
accordingly.
- The last visited page. When the phone is disconnected from the
service, the address of the last visited page is kept in memory until a
new page is visited during the next connection.
- A bookmark showing the title.
When you scroll through bookmarks, you can see the address of the
highlighted bookmark in the Go to field at the bottom of the display.
Options in the Bookmarks view (when a bookmark or folder is selected): Open,
Download, Back to page, Send, Go to web address / Find bookmark, Add bookmark,
Edit, Delete, Read service msgs., Disconnect, Move to folder, New folder, Mark/
Unmark, Rename, Clear cache, Details, Add to ’Go to’, Settings, Help, and Exit.
Adding bookmarks manually
1. In the Bookmarks view, select Options→
Add bookmark.
2. Start to fill in the fields. Only the address
must be defined. The default access point
is assigned to the bookmark if no other
one is selected. Press
to enter special
characters such as /, ., :, and @. Press
to clear characters.
3. Select Options→ Save to save the
bookmark.
113
r1013_en.book Page 114 Tuesday, September 2, 2003 8:07 AM
Services and Applications
Browsing
On a browser page, new links appear
underlined in blue and previously visited
links in purple. Images that act as links have
a blue border around them.
Options when browsing: Open, Service options,
Bookmarks, History, Go to web address, View
image, Read service msgs., Save as bookmark, Send
bookmark, Reload, Disconnect, Normal display/
Vertical display, Show images, Clear cache, Save
page, Find, Details, Settings, Help, and Exit.
Keys and commands used in browsing
• To open a link, press
• To scroll the view, use the joystick.
• To enter letters and numbers in a field, press the keys
Press
to enter special characters such as /, ., :, and @. Press
to clear characters.
• To go to the previous page while browsing, press Back. If Back is not
available, select Options→ History to view a chronological list of the
pages you have visited during a browsing session. The history list is
cleared each time a session is closed.
• To check boxes and make selections, press
• To retrieve the latest content from the server, select Options→
Reload.
• To open a sublist of commands or actions for the currently open
browser page, select Options→ Service options.
• Press and hold
browsing.
to disconnect from a browser service and to quit
Saving bookmarks
• To save a bookmark while browsing, select Options→ Save as
bookmark.
• To save a bookmark received in a smart message, open the message
in the Inbox in Messaging and select Options→ Save to bookmarks.
See ‘Receiving smart messages’, p. 64.
114
r1013_en.book Page 115 Tuesday, September 2, 2003 8:07 AM
Services and Applications
Viewing saved pages
Options in the Saved pages view: Open, Back to page, Reload, Delete, Read service
msgs., Disconnect, Move to folder, New folder, Mark/Unmark, Rename, Clear
cache, Details, Add to ’Go to’, Settings, Help, and Exit.
If you regularly browse pages containing information which doesn’t
change very often, you can save and then browse them when offline.
• To save a page, while browsing select Options→Save page.
Saved pages are indicated by the following icon:
- The saved browser page.
In the saved pages view you can also create folders to store your
saved browser pages.
Folders are indicated by the following icon:
- Folder containing saved browser pages.
• To open the Saved pages view, press
in the Bookmarks view. In the Saved
pages view, press
to open a saved
page.
To start a connection to the browser service
and to retrieve the page again, select
Options→ Reload.
Note: The phone stays online after you
reload the page.
Downloading
You can download items such as ringing tones, images, operator logos,
software, and video clips through the mobile browser. These items can
be provided free or you can purchase them.
Once downloaded, items are handled by the respective applications on
your phone, for example a downloaded photo will be saved in the
Gallery.
Note: Only install software from sources that offer adequate protection
against viruses and other harmful software.
Note: The information or services you have accessed are stored in the
cache memory of the phone. A cache is a buffer memory that is used to store data
115
r1013_en.book Page 116 Tuesday, September 2, 2003 8:07 AM
Services and Applications
temporarily. If you have tried to access or have accessed confidential information
requiring passwords (for example, your bank account), empty the cache of your
phone after each use. To empty the cache, select Options→ Clear cache.
Purchasing an item
To download the item:
1. Scroll to the link and select Options→ Open.
2. Choose the appropriate option to purchase the item, for example,
Buy.
Carefully read all the information provided.
If the online content is compatible, you can use your wallet information
to make the purchase:
1. Select Open wallet. You will be prompted for your wallet code. See
‘Entering the wallet code’, p. 101.
2. Select the appropriate card category from your wallet.
3. Select Fill in. This will upload the selected wallet information.
If the wallet does not contain all infomation necessary for the purchase,
you will be requested to enter the remaining details manually.
Note: Copyright protections may prevent some images, ringtones and
other content from being copied, modified, transferred, or forwarded.
Checking an item before downloading
You can see details about an item before you
download it. Details about an item may
include the price, a brief description and
size.
• Scroll to the link and select Options→
Open.
Details about the item are displayed on
your phone.
• If you want to continue with the
downloading, press Accept, or if you want
to cancel the download, press Cancel.
116
r1013_en.book Page 117 Tuesday, September 2, 2003 8:07 AM
Services and Applications
Ending a connection
• Select Options→ Disconnect, or
• Press and hold
to quit browsing and to return to standby mode.
Browser settings
Select Options→ Settings:
• Default access point - If you want to change the default access point,
press
to open a list of available access points. The current default
access point is highlighted. See ‘Connection settings’, p. 81.
• Show images - Choose if you want to view pictures when you are
browsing. If you choose No, you can later load images during
browsing by selecting Options→ Show images.
• Text wrapping - Choose Off if you don’t want the text in a paragraph
to automatically wrap, or On if you do. If text is not wrapped, the
ends of lines may be truncated.
• Font size - You can choose five text sizes in the browser: Smallest,
Small, Normal, Large, and Largest.
• Default encoding - To make sure your browser pages display text
characters correctly, select one of the following: West. Europ. (ISO)
for Western European languages, Unicode (UTF-8), ISO8859-2 for
Central European languages, ISO8859-4 for Baltic languages,
ISO8859-5 for Cyrillic based languages, ISO8859-7 for Greek
language, ISO8859-9 for Turkish language, Hebr. (ISO-Visual) for
Hebrew language, and Arabic (ISO) for Arabic language.
• Cookies - Allow /Reject. You can enable or disable the receiving and
sending of cookies (a means of content providers to identify users
and their preferences for frequently used content).
• Conf. DTMF sending - Always / First time only. Choose whether you
want to confirm before the phone sends DTMF tones during a voice
call. See ‘Options during a call’, p. 23. For example, you can make a
voice call while you are viewing a browser page, send DTMF tones
while a voice call is in progress, and save in Contacts a name and
phone number from a browser page.
117
r1013_en.book Page 118 Tuesday, September 2, 2003 8:07 AM
Services and Applications
• Wallet - Choose On if want the wallet to open automatically when a
compatible browser page is opened.
■ Application manager
Go to Menu→ App. manager
In Application manager you can install new Symbian
operating system applications (SIS files) and Java™ applications (Java
MIDlets and MIDlet suites). You can also update and uninstall
applications from the phone, and monitor the installation history.
Applications in Application manager use shared memory. See ‘Shared
memory’, p. 20.
Options in the Application manager main view: Install, View details, View
certificate, Update, Go to web address, Remove, View log, Send log, Settings, App.
downloads, Help, and Exit.
When you open Application manager, you
can see a list of:
• applications saved in Application
manager,
• partially installed applications (indicated
by ), and
• fully installed applications that you can
remove (indicated by ).
Note: You can only use Symbian operating
system applications with a .SIS extension.
Note: Your phone supports J2ME™Java applications. Do not download
PersonalJava™ applications to your phone as they cannot be installed.
Installing applications - general information
You can install applications that are specifically intended for this phone
and suitable for the Symbian operating system.
Note: If you install an application that is not intended specifically for this
phone, it may function and look different from what was originally intended.
Applications may be downloaded to your phone during browsing,
received as attachments in multimedia messages or e-mails, or recevied
118
r1013_en.book Page 119 Tuesday, September 2, 2003 8:07 AM
Services and Applications
via Bluetooth or via infrared from another device, for example a phone
or a compatible PC. If you are using PC Suite to transfer the application,
place it in the Installs folder in the File manager.
Important: Only install applications from sources that offer adequate protection
against viruses and other harmful software.
To increase protection, the application installation system uses digital
signatures and certificates for applications. Do not install the
application if Application manager gives a security warning during
installation.
Important: If you install an application that contains an update or repair to an
existing application, you can only restore the original application if you have the
original application or a full back-up copy of the removed application. To restore
the original application, first remove the updated or repaired application and
then install again from the original application or the back-up copy.
During installation, the phone checks the integrity of the application to
be installed. The phone shows information about the checks being
carried out and you are given options whether to continue or cancel the
installation. Once the phone has checked the integrity of the
application, it is installed on your phone.
Installing applications
• Open Application manager, scroll to the application, and select
Options→ Install to start the installation.
• Alternatively, search the phone memory or the memory card, select
the application, and press
to start the installation.
Some applications may give the option of partial installation allowing
you to select the particular components of an application that you want
to install.
If you are installing an application without a digital signature or a
certificate, the phone warns you of the risks. Continue installation only
if you are absolutely sure of the origin and contents of the application.
Installing Java™
The .JAR file is required for installation. If it is missing, the phone may
ask you to download it. If there is no access point defined for
Application manager, you will be asked to select one. When you are
downloading the .JAR file, you may need to enter a user name and
119
r1013_en.book Page 120 Tuesday, September 2, 2003 8:07 AM
Services and Applications
password to access the server. You obtain these from the supplier or
manufacturer of the application.
• To start a data connection and to view extra information about the
application, scroll to it and select Options→ Go to web address.
• To start a data connection and to check if there is an update
available for the application, scroll to it and select Options→
Update.
Java settings
• To change the default access point that a Java application uses for
downloading extra data, select Options→Settings→Access point.
See ‘Access points’, p. 83.
• To change the security settings that determine the actions that a
Java application is permitted to do, select Options→Settings.
Note: Not all Java applications permit you to change the security
settings.
Removing an application
1. To remove an application, scroll to it and select Options→ Remove.
2. Press Yes to confirm the removal.
Important: If you remove an application, you can only re-install it if you have the
original application or a full backup of the removed application. If you remove an
application, you may no longer be able to open documents created with that
application. If another application depends on the application that you removed,
the other application may stop working. Refer to the documentation of the
installed application for details.
120
r1013_en.book Page 121 Tuesday, September 2, 2003 8:07 AM
Connectivity
10. Connectivity
■ Bluetooth connection
Go to Menu → Connectivity→ Bluetooth
You can transfer data from your phone to
another compatible device, for example, a
phone, a headset using Bluetooth technology,
or a computer, via Bluetooth or infrared.
Note: This phone is designed to be
compliant with and to adopt Bluetooth
Specification 1.1. However, interoperability
between the phone and other products with
Bluetooth wireless technology depends also on the
profiles and protocols used. For more information
on the compatibility between Bluetooth devices,
please consult your dealer.
Bluetooth technology enables cost-free wireless connections between
electronic devices within a maximum range of 10 metres. A Bluetooth
connection can be used to send images, videos, texts, business cards,
calendar notes, or to connect wirelessly to devices using Bluetooth
technology, such as computers.
Since devices using Bluetooth technology communicate using radio
waves, your phone and the other devices do not need to be in direct
line-of-sight.
The two devices only need to be within a maximum of 10 metres of each
other, although the connection can be subject to interference from
obstructions such as walls or from other electronic devices.
Using Bluetooth technology consumes the battery and the phone's
operating time will be reduced. Take this into account when performing
other operations with your phone.
There may be restrictions on using devices using Bluetooth technology.
Check with your local authorities.
121
r1013_en.book Page 122 Tuesday, September 2, 2003 8:07 AM
Connectivity
Activating Bluetooth application for the first time
When you activate Bluetooth for the first time, you are asked to give a
name to your phone.
Note: After you have set Bluetooth to be active and changed My phone's
visibility to All, your phone and this name can be seen by other users with devices
using Bluetooth technology.
• Write a name (max. 30 letters). If you send data via a Bluetooth
connection before you have given an individual name to your phone,
the default name will be used.
Bluetooth settings
To modify Bluetooth settings, scroll to the
setting you want to change and press
• Bluetooth - Select On if you want to use
Bluetooth. If you select Off, all active
Bluetooth connections are ended, and
Bluetooth cannot be used for sending or
receiving data.
• My phone's visibility - If you select Shown
to all, your phone can be found by other
devices during device search. If you select
Hidden, your phone cannot be found by other devices during device
search.
• My phone’s name - Define a name for your phone. After you have set
Bluetooth to be active and changed My phone's visibility to All, this
name can be seen by other devices.
Sending data via Bluetooth
Note: There can be only one active Bluetooth connection at a time.
122
r1013_en.book Page 123 Tuesday, September 2, 2003 8:07 AM
Connectivity
1. Open an application where the item you
wish to send is stored. For example, to
send a photo to another device, open the
Gallery application.
2. Scroll to the item you want to send and
select Options→ Send→ Via Bluetooth.
3. The phone starts to search for devices
within range. Devices using Bluetooth
technology that are within range start to
appear on the display one by one. You
can see a device icon, the device’s name, the device type, or a short
name. Paired devices are shown with
. A paired device is one
where a Bluetooth connection already exists between your phone
and the other device.
• To interrupt the search, press Stop. The device list freezes and you
can start to form a connection to one of the devices already
found.
Note: When searching for devices, some devices may show only
the unique device addresses. To find out the unique address of your
phone, enter the code *#2820# in standby mode.
Note: If you have searched for devices earlier, a list of the devices
that were found previously is shown first. To start a new search, select
More devices. If you switch off the phone, the list of devices is cleared and
the device search needs to be started again before sending data.
4. Scroll to the device you want to connect with and press Select. The
item you are sending is copied to Outbox and the note Connecting is
shown.
5. Pairing (if not required by the other device, go to step 6.)
• If the other device requires pairing before data can be
transmitted, a tone sounds and you are asked to enter a passcode.
• Create your own passcode (1-16 characters long, numeric) and
agree with the owner of the other device to use the same code.
This passcode is used only once and you do not have to memorise
it.
• After pairing, the device is saved to the Paired devices view.
123
r1013_en.book Page 124 Tuesday, September 2, 2003 8:07 AM
Connectivity
6. When the connection has been successfully established, the note
Sending data is shown.
Data received via Bluetooth can be found in the Inbox folder in
Messaging. See ‘Inbox - receiving messages’, p. 62.
Note: Pairing means authentication. The users of the devices using
Bluetooth technology should agree together what the passcode is, and use the
same passcode for both devices in order to pair them. Devices that do not have a
user interface have a preset passcode.
Icons for different devices:
- Computer,
- Phone,
device.
- Audio/video, and
- Bluetooth
Note: If sending fails, the message or data will be deleted. The Drafts
folder in Messaging does not store messages sent via Bluetooth.
Checking the status of the Bluetooth connection
• When is shown in standby mode, Bluetooth is active.
• When
device.
is blinking, your phone is trying to connect to the other
• When
is shown continuously, the Bluetooth connection is active.
Paired devices view
Pairing with a device makes device searches easier and quicker. Paired
devices are easier to recognise, they are indicated by
in the search
result list. In the Bluetooth main view, press
to open a list of paired
devices (
).
Options in the paired devices view: New paired device, Assign short
name, Set as authorised / Set as unauthorised, Delete, Delete all, Help, and Exit.
Pairing with a device
1. Select Options→ New paired device in the Paired devices view. The
phone starts to search for devices within range. Or, if you have
searched for devices earlier, a list of the devices that were found
previously is shown first. To start a new search, select More devices.
2. Scroll to the device you want to pair with and press Select.
3. Exchange passcodes, see step 5. (Pairing) in the previous section. The
device is added to the Paired devices list.
124
r1013_en.book Page 125 Tuesday, September 2, 2003 8:07 AM
Connectivity
Cancelling pairing
• In the Paired devices view, scroll to the device whose pairing you
want to cancel and press
or select Options→ Delete. The device
is removed from the Paired devices list and the pairing is cancelled.
• If you want to cancel all pairings, select Options→ Delete all.
Note: If you are currently connected to a device, and delete the pairing
with that device, the pairing is removed and the device connection is terminated,
but the Bluetooth connection remains active.
Setting a device to be authorised or unauthorised
After you have paired with a device, you can
set it to be authorised or unauthorised:
Unauthorised (default) - Connection
requests from this device need to be
accepted separately every time.
Authorised - Connections between your
phone and this device can be made without
your knowledge. No separate acceptance or
authorisation is needed. Use this status for
your own devices, for example, your PC, or
devices that belong to someone you trust. The icon
authorised devices in the Paired devices view.
is added next to
• In the Paired devices view, scroll to the device and select Options→
Set as authorised / Set as unauthorised.
Receiving data via Bluetooth
When you receive data via Bluetooth, a tone sound is played and you are
asked if you want to accept the message. If you accept, the item is
placed in the Inbox folder in Messaging. Messages received via
Bluetooth are indicated by
. See ‘Inbox - receiving messages’, p. 62.
Closing the Bluetooth connection
A Bluetooth connection is disconnected automatically after sending or
receiving data.
125
r1013_en.book Page 126 Tuesday, September 2, 2003 8:07 AM
Connectivity
■ Infrared connection
Go to Menu→ Connectivity→ Infrared
Via infrared, you can send or receive data such as business cards and
calendar notes to and from a compatible phone or data device.
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with
other IR devices. This device is a Class 1 Laser product.
Sending and receiving data via infrared
All items which are received via infrared are placed in the Inbox folder in
Messaging. New infrared messages are indicated by
. See ‘Inbox receiving messages’, p. 62.
1. Make sure that the infrared ports of the sending and receiving
devices are pointing at each other and that there are no obstructions
between the devices. The preferable distance between the two
devices is one metre at most. To find the infrared port, see the Keys
and parts section in the Getting Started guide.
2. The user of the receiving device activates the infrared port.
To activate the infrared port of your phone to receive data via
infrared, go to Menu→ Connectivity→ Infrared and press
3. The user of the sending device selects the desired infrared function
to start data transfer.
To send data via infrared, select Options→ Send→ via infrared in an
application.
If data transfer is not started within one minute after the activation of
the infrared port, the connection is cancelled and must be started again.
Note: Windows 2000: To be able to use infrared to transfer files between
your phone and a compatible computer, go to Control Panel and select Wireless
Link. In the Wireless Link File Transfer tab check the Allow others to send files to
your computer using infrared.
Checking the status of the infrared connection
• When
blinks, your phone is trying to connect to the other
device or a connection has been lost.
• When
is shown continuously, the infrared connection is active
and your phone is ready to send and receive data via its infrared port.
126
r1013_en.book Page 127 Tuesday, September 2, 2003 8:07 AM
Connectivity
■ Connection manager
Go to Menu→ Connectivity→ Connection manager
In Connection manager you can identify the
status of multiple data connections, view
details on the amount of data sent and
received, for example, and end unused
connections.
Note: You can view details of data
connections only. Voice calls are not listed.
When you open Connection manager, you
can see a list of:
• open data connections,
- Data call,
- High sp. GSM,
- GPRS
• the status of each connection, or
• amount of data uploaded and downloaded for each connection
(GPRS connections only), or
• the duration of each connection (GSM and high-speed data
connections only).
Note: The actual time invoiced for calls by your service provider may vary,
depending upon network features, rounding-off for billing, and so forth.
Options in the Connection manager main view when there are one or
more connections: Details, Disconnect, Disconnect all, Help and Exit.
Viewing connection details
To view the details of a connection, scroll to a connection and select
Options→ Details The following is displayed:
Name - the name of the Internet access point (IAP) in use, or ’Modem
connection’ if the connection is a dial-up connection.
Bearer - the type of data connection: Data call, High sp. GSM, or GPRS.
Status - the current status of the connection.
Received - the amount of data, in bytes, received to the phone.
Sent - the amount of data, in bytes, sent from the phone.
Duration - the length of time that the connection has been open.
127
r1013_en.book Page 128 Tuesday, September 2, 2003 8:07 AM
Connectivity
Speed - the current speed of both sending and receiving data in kB/s
(kilobytes per second).
Dial-up (GSM) - the dial-up number used, or Name (GPRS) - access
point name used.
Shared (not displayed if the connection is not shared)- the number of
applications using the same connection.
Ending connections
• Scroll to a connection and select Options→ Disconnect to end that
connection only, or
• Select Options→ Disconnect all to close all currently open
connections.
■ Connecting your phone to a compatible
computer
For further information on how to make a connection to a compatible
computer via infrared or Bluetooth, and how to install PC Suite, see the
Installation Guide for PC Suite on the CD-ROM in the ‘Install’ section.
For further information on how to use PC Suite, see the help function on
PC suite.
Using the CD-ROM
The CD-ROM should launch itself after you have inserted it into the CDROM drive of your compatible PC. If not, proceed as follows:
1. Click the Window Start button and select Programs→ Windows
Explorer.
2. On the CD-ROM drive, locate a file called setup.exe and double-click
it. The CD-ROM interface opens.
3. You can find PC Suite in the ‘Install’ section. Double-click ‘PC Suite
for Nokia 6600’. The installation wizard will guide you through the
installation process.
128
r1013_en.book Page 129 Tuesday, September 2, 2003 8:07 AM
Connectivity
Using your phone as a modem
Use your phone as a modem to connect to the Internet with
a compatible PC, or to send and receive faxes.
Detailed installation instructions can be found in Quick guide for
Modem Options for Nokia 6600 on the CD-ROM supplied with the
phone.
■ Sync - remote synchronisation
Go to Menu→ Connectivity→ Sync
The Sync application enables you to
synchronise your calendar or contacts with
various calendar and address book
applications on a compatible computer or on
the Internet. Synchronisation takes place
over a GSM data call or packet data
connection.
The synchronisation application uses
SyncML technology for synchronisation. For
information on SyncML compatibility, please
contact the supplier of the calendar or address book application you
want to synchronise your phone data with.
Creating a new synchronisation profile
Options in the Remote sync main view: Synchronise, New sync profile,
Edit sync profile, Delete, View log, Help, and Exit.
1. If no profiles have been defined, the phone asks you if you want to
create a new profile. Select Yes.
To create a new profile in addition to existing ones, select Options→
New sync profile. Choose whether you want to use the default
setting values or copy the values from an existing profile to be used
as the basis for the new profile.
2. Define the following:
Sync profile name - Write a descriptive name for the profile.
129
r1013_en.book Page 130 Tuesday, September 2, 2003 8:07 AM
Connectivity
Access point - Select an access point you want to use for the data
connection.
Host address - Contact your service provider or system administrator
for the correct values.
Port - Contact your service provider or system administrator for the
correct values.
User name - Your user ID for the synchronisation server. Contact
your service provider or system administrator for your correct ID.
Password - Write your password. Contact your service provider or
system administrator for the correct value.
Press
to select:
Calendar - Select Yes if you want to synchronise your calendar.
Remote calendar - Enter a correct path to the remote calendar on
the server. Must be defined if the previous setting Calendar has been
set to Yes.
Contacts - Select Yes if you want to synchronise your contacts.
Remote contacts - Enter a correct path to the remote address book
on the server. It must be defined if the previous setting Contacts has
been set to Yes.
3. Press Done to save the settings.
Synchronising data
In the Sync main view, you can see the different profiles, and what kind
of data will be synchronised: Calendar, Contacts, or both.
1. In the main view, scroll to a profile and select Options→
Synchronise. The status of the synchronisation is shown at the
bottom of the screen.
To cancel synchronisation before it is finished, press Cancel.
2. You are notified when the synchronisation has been completed.
• After synchronisation is complete, press View log or select
Options→ View log to open a log file showing the synchronisation
status (Complete or Incomplete) and how many calendar or contact
130
r1013_en.book Page 131 Tuesday, September 2, 2003 8:07 AM
Connectivity
entries have been added, updated, deleted, or discarded (not
synchronised) in the phone or on the server.
131
r1013_en.book Page 132 Tuesday, September 2, 2003 8:07 AM
Troubleshooting
11. Troubleshooting
Memory low
When one of the following notes is shown, the phone memory is low and
you must delete some data: Not enough memory to perform operation.
Delete some data first. or Memory low. Delete some data. To view what
kind of data you have and how much memory the different data groups
consume, go to File manager and select Options→Memory details.
You may want to delete the following items regularly to avoid
memory getting low:
• messages from the Inbox, Drafts, and Sent folders in Messaging,
• retrieved e-mail messages from the phone memory,
• saved browser pages, and
• images, video clips and sound clips in the Gallery.
If you want to delete contact information, calendar notes, call timers,
call cost timers, game scores, or any other data, go to the respective
application to remove the data.
If you are deleting multiple items and one of the following notes is
shown again: Not enough memory to perform operation. Delete some
data first. or Memory low. Delete some data., try deleting items one by
one (starting from the smallest item).
Clearing calendar memory - To remove more than one event at a time,
go to the Month view and select Options→ Delete entry→ and either:
• Before date - to delete all calendar notes which take place before a
certain date. Enter the date before which all calendar notes will be
deleted, or
• All entries - to delete all calendar notes.
Erasing log information - To erase all the log contents, Recent calls
register, and Messaging delivery reports permanently, go to Logs, press
, and select Options→ Clear log or go to Settings→ Log duration→
No log.
Different ways to store data:
132
r1013_en.book Page 133 Tuesday, September 2, 2003 8:07 AM
Troubleshooting
• Use PC Suite to take a backup copy of all data to your computer. See
‘Connecting your phone to a compatible computer’, p. 128.
• Send images to your e-mail address and then save the images to your
computer (network service).
• Send data via infrared or Bluetooth to another compatible device.
• Store data on a compatible memory card.
■ Q&A
Camera
• Q: Why do images look smudgy?
A: Check that the camera lens protection window is clean. See ‘Care
and maintenance’, p. 138.
Bluetooth
• Q: Why can’t I end a Bluetooth connection?
A: If another device is pairing with your phone but not sending data,
and leaves the device connection open, then the only way to
disconnect it is to deactivate the Bluetooth link altogether. Go to
Bluetooth and select the setting Bluetooth→ Off.
• Q: Why can’t I find a device using Bluetooth technology.
A: Check that both have activated Bluetooth.
Check that the distance between the two devices is not over 10
metres or that there are no walls or other obstructions between the
devices.
Check that the other device is not in ‘Hidden’ mode.
Check that both devices are compatible.
Multimedia messaging
• Q: What should I do when the phone tells me that it cannot receive a
multimedia message because memory is full?
A: The amount of memory needed is indicated in the error message:
Not enough memory to retrieve message. Delete some data first. To
view what kind of data you have and how much memory the
133
r1013_en.book Page 134 Tuesday, September 2, 2003 8:07 AM
Troubleshooting
different data groups consume, go to File manager and select
Options→Memory details.
• Q: How can I end the data connection when the phone starts a data
connection again and again? The notes: Retrieving message or Trying
to retrieve message again are shown briefly. What is happening?
A: The phone is trying to retrieve a multimedia message from the
multimedia messaging centre.
Check that the settings for multimedia messaging have been defined
correctly and that there are no mistakes in phone numbers or
addresses. Go to Messaging and select Options→ Settings→
Multimedia message.
To stop the phone from making a data connection, you have the
following options. Go to Messaging and select Options→ Settings→
Multimedia message, and then:
• Select On receiving msg. → Defer retrieval if you want the
multimedia messaging centre to save the message to be retrieved
later, for example, after you have checked the settings. After this
change, the phone still needs to send information notes to the
network. When you want to retrieve the message , select Retr.
immediately.
• Select On receiving msg. → Reject message - if you want to reject
all incoming multimedia messages. After this change, the phone
needs to send information notes to the network and the
multimedia messaging centre will delete all multimedia messages
that are waiting to be sent to you.
• Select Multimedia reception→ Off - if you want to ignore all
incoming multimedia messages. After this change the phone will
not make any network connections related to multimedia
messaging.
Messaging
• Q: Why can’t I select a contact?
A: If you cannot select a contact in the Contacts directory, the
contact card does not have a phone number or an e-mail address.
Add the missing information to the contact card in the Contacts
application.
134
r1013_en.book Page 135 Tuesday, September 2, 2003 8:07 AM
Troubleshooting
Calendar
• Q: Why are the week numbers missing?
A: If you have changed the Calendar settings so that the week starts
on a day other than Monday, then the week numbers will not be
shown.
Browser services
• Q: No valid access point defined. Define one in Services settings.
A: Insert the proper browser settings. Contact your service provider
for instructions. See ‘Setting up the phone for the browser service’,
p. 111.
Log
• Q: Why does the log appear empty?
A: You may have activated a filter, and no communication events
fitting that filter have been logged. To see all events, select Options
→ Filter→ All communication.
PC connectivity
• Q: Why do I have problems in connecting the phone to my PC?
A: Make sure that PC Suite is installed and running on your PC. See
the Installation guide for PC Suite on the CD-ROM in the ’Install’
section. For further information on how to use PC Suite, see the help
function of PC suite.
Access codes
• Q: What is my password for the lock code, PIN code, or PUK code?
A: The default lock code is 12345. If you forget or lose the lock code,
contact your phone dealer.
If you forget or lose a PIN or PUK code, or if you have not received
such a code, contact your service provider.
For information about passwords, contact your access point provider,
for example, a commercial Internet service provider (ISP), service
provider, or network operator.
Application not responding
• Q: How do I close an application that is not responding?
135
r1013_en.book Page 136 Tuesday, September 2, 2003 8:07 AM
Troubleshooting
A: Open the application switching window by pressing and holding
. Then scroll to the application, and press
to close the
application.
136
r1013_en.book Page 137 Tuesday, September 2, 2003 8:07 AM
Battery information
12. Battery information
■ Charging and Discharging
Your phone is powered by a rechargeable battery.
Note that a new battery's full performance is achieved only after two or three
complete charge and discharge cycles!
The battery can be charged and discharged hundreds of times but it will
eventually wear out. When the operating time (talk-time and standby time) is
noticeably shorter than normal, it is time to buy a new battery.
Use only batteries approved by the phone manufacturer and recharge your
battery only with the chargers approved by the manufacturer. Unplug the
charger when not in use. Do not leave the battery connected to a charger for
longer than a week, since overcharging may shorten its lifetime. If left unused a
fully charged battery will discharge itself over time.
Temperature extremes can affect the ability of your battery to charge.
Use the battery only for its intended purpose.
Never use any charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object (coin, clip or pen) causes direct connection of the + and terminals of the battery (metal strips on the battery) for example when you carry
a spare battery in your pocket or purse. Short- circuiting the terminals may
damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A phone with a hot
or cold battery may temporarily not work, even when the battery is fully charged.
Battery’s performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire!
Dispose of batteries according to local regulations (e.g. recycling). Do not dispose
of as household waste.
Remove the battery only when the phone is switched off.
137
r1013_en.book Page 138 Tuesday, September 2, 2003 8:07 AM
Care and maintenance
Care and maintenance
Your phone is a product of superior design and craftsmanship and should be
treated with care. The suggestions below will help you to fulfil any warranty
obligations and to enjoy this product for many years.
• Keep the phone and all its parts and enhancements out of the reach of small
children.
• Keep the phone dry. Precipitation, humidity and all types of liquids or
moisture can contain minerals that will corrode electronic circuits.
• Do not use or store the phone in dusty, dirty areas. Its moving parts can be
damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When it warms up (to its normal
temperature), moisture can form inside, which may damage electronic circuit
boards.
• Do not attempt to open the phone. Non-expert handling may damage it.
• Do not drop, knock or shake the phone. Rough handling can break internal
circuit boards.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the phone.
• Do not paint the phone. Paint can clog the moving parts and prevent proper
operation.
• Use a soft, clean and dry cloth to clean the camera lens.
• Use only the supplied or an approved replacement antenna. Unauthorised
antennas, modifications or attachments could damage the phone and may
violate regulations governing radio devices.
All of the above suggestions apply equally to your phone, battery, charger or any
enhancement. If any of them are not working properly, take it to your nearest
qualified service facility. The personnel there will assist you and, if necessary,
arrange for service.
138
r1013_en.book Page 139 Tuesday, September 2, 2003 8:07 AM
Important safety information
Important safety information
■ Traffic Safety
Do not use a hand-held telephone while driving a vehicle. Always secure the
phone in its holder; do not place the phone on the passenger seat or where it can
break loose in a collision or sudden stop.
Remember road safety always comes first!
■ Operating environment
Remember to follow any special regulations in force in any area and always
switch off your phone whenever it is forbidden to use it, or when it may cause
interference or danger.
Use the phone only in its normal operating positions.
To maintain compliance with RF exposure guidelines only use Nokia approved
enhancements. When the phone is on and being worn on the body, always use a
Nokia approved carrying case.
Parts of the phone are magnetic. Metallic materials may be attracted to the
phone, and persons with a hearing aid should not hold the phone to the ear with
the hearing aid. Always secure the phone in its holder, because metallic materials
may be attracted by the earpiece. Do not place credit cards or other magnetic
storage media near the phone, because information stored on them may be
erased.
■ Electronic devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF
signals from your wireless phone.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of 20 cm (6
inches) be maintained between a handheld wireless phone and a pacemaker to
avoid potential interference with the pacemaker. These recommendations are
consistent with the independent research by and recommendations of Wireless
Technology Research. Persons with pacemakers:
• Should always keep the phone more than 20 cm (6 inches) from their
pacemaker when the phone is switched on;
• Should not carry the phone in a breast pocket;
139
r1013_en.book Page 140 Tuesday, September 2, 2003 8:07 AM
Important safety information
• Should use the ear opposite the pacemaker to minimise the potential for
interference.
• If you have any reason to suspect that interference is taking place, switch off
your phone immediately.
Hearing aids
Some digital wireless phones may interfere with some hearing aids. In the event
of such interference, you may want to consult your service provider.
Other medical devices
Operation of any radio transmitting equipment, including cellular phones, may
interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if
they are adequately shielded from external RF energy or if you have any
questions. Switch off your phone in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care facilities may
be using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles (e.g. electronic fuel injection systems, electronic antiskid (anti-lock) braking systems, electronic speed control systems, air bag
systems). Check with the manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted facilities
Switch your phone off in any facility where posted notices so require.
■ Potentially explosive atmospheres
Switch off your phone when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Sparks in such areas could cause an explosion
or fire resulting in bodily injury or even death.
Users are advised to switch off the phone when at a refuelling point (service
station). Users are reminded of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and distribution areas), chemical
plants or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats; chemical transfer or storage facilities;
vehicles using liquified petroleum gas (such as propane or butane); areas where
140
r1013_en.book Page 141 Tuesday, September 2, 2003 8:07 AM
Important safety information
the air contains chemicals or particles, such as grain, dust or metal powders; and
any other area where you would normally be advised to turn off your vehicle
engine.
■ Vehicles
Only qualified personnel should service the phone, or install the phone in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty which may apply to the unit.
Check regularly that all wireless phone equipment in your vehicle is mounted and
operating properly.
Do not store or carry flammable liquids, gases or explosive materials in the same
compartment as the phone, its parts or enhancements.
For vehicles equipped with an air bag, remember that an air bag inflates with
great force. Do not place objects, including both installed or portable wireless
equipment in the area over the air bag or in the air bag deployment area. If invehicle wireless equipment is improperly installed and the air bag inflates,
serious injury could result.
Using your phone while in the air is prohibited. Switch off your phone before
boarding an aircraft. The use of wireless telephones in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network and may be illegal.
Failure to observe these instructions may lead to suspension or denial of
telephone services to the offender, or legal action or both.
■ Emergency calls
Important:
This phone, like any wireless phone, operates using radio signals, wireless and
landline networks as well as user-programmed functions. Because of this,
connections in all conditions can not be guaranteed. Therefore you should never
rely solely upon any wireless phone for essential communications (e.g. medical
emergencies).
Emergency calls may not be possible on all wireless phone networks or when
certain network services and/or phone features are in use. Check with local
service providers.
To make an emergency call:
1. If the phone is not on, switch it on. Check for adequate signal strength.
Some networks may require that a valid SIM card is properly inserted in the
phone.
141
r1013_en.book Page 142 Tuesday, September 2, 2003 8:07 AM
Important safety information
2. Press as many times as needed (e.g. to exit a call, to exit a menu, etc.) to
clear the display and ready the phone for calls.
3. Key in the emergency number for your present location (e.g. 112 or other
official emergency number). Emergency numbers vary by location.
4. Press the
key
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. Consult this guide and your local cellular
service provider.
When making an emergency call, remember to give all the necessary information
as accurately as possible. Remember that your wireless phone may be the only
means of communication at the scene of an accident - do not cut off the call
until given permission to do so.
■ Certification information (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are based
on standards that were developed by independent scientific organizations
through periodic and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by
the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating
positions accepted by the FCC with the phone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the phone while operating
can be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna, the
lower the power output.
Before a phone model is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the limit established by the
government-adopted requirement for safe exposure. The tests are performed in
positions and locations (for example, at the ear and worn on the body) as
142
r1013_en.book Page 143 Tuesday, September 2, 2003 8:07 AM
Important safety information
required by the FCC for each model. The highest SAR value for this model phone
as reported to the FCC when tested for use at the ear is 0.50 W/kg, and when
worn on the body, as described in this user guide, is 1.25 W/kg. (Body-worn
measurements differ among phone models, depending upon available accessories
and FCC requirements).
While there may be differences between the SAR levels of various phones and at
various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model phone is on file with the FCC and can
be found under the Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID QVVNHL-10.
For body worn operation, this phone has been tested and meets the FCC RF
exposure guidelines for use with an accessory that contains no metal and that
positions the handset a minimum of 5/8 inch (1.5 cm) from the body. Use of other
accessories may not ensure compliance with the FCC RF exposure guidelines. If
you do not use a body-worn accessory and are not holding the phone at the ear,
position the handset at a minimum of 5/8 inch (1.5 cm) from your body when the
phone is switched on.
* In the United States and Canada, the SAR limit for mobile phones used by the
public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in measurements. SAR
values may vary depending on national reporting requirements and the network
band. For SAR information in other regions please look under product
information at www.nokia.com/us
143
r1013_en.book Page 144 Tuesday, September 2, 2003 8:07 AM
Index
Access codes 87
Access points 81
Settings 83
Access points, glossary explanation 81
Activating loudspeaker 19
Alarm clock 107
Snooze 107
Animations 42
Answering a call 23
Automatic 91
Application manager 118
Applications
Adding voice commands 94
Installing 119
Java application settings 120
Removing files 120
Attachments
Retrieving 68
Viewing 68
Automatic answer 91
Background images 48
Barring calls 90
Battery information 137
Bluetooth 121
Cancelling pairing 125
Closing the connection 125
Connection requests 123
Connection status indicators 124
Device icons 124
Pairing 123
Pairing requests 123
Passcode, glossary explanation
124
Preset passcode 124
Receiving data 125
144
Sending data 122
Settings 122
Unique device address 123
Browser
Browser access points, see Access
points
Connecting 112
Ending connections 117
Icons 113
Service message settings 76
Service messages 65, 66
WAP pages 111
XHTML pages 111
Browsing 114
Calculator 105
Calendar 33
Alarm 36
Alarm tone 36
Calendar entry fields 34
Deleting many entries
simultaneously 132
Remote synchronisation 130
Settings 36
Stopping alarms 37
Views 35
Call barring 90
Call register
See Log
Calling 21
Calls
Answering 23
Conference calls 22
Dialled 26
Diverting 23
Duration 26
International 21
r1013_en.book Page 145 Tuesday, September 2, 2003 8:07 AM
Missed 25
Options during a call 23
Received 25
Rejecting 23
Settings 80
Settings for diverting 24
Speed dialling 22
Transferring 24
Using the Contacts directory 21
Camera 39
Image types 41
Memory consumption 41
Self-timer 40
Settings 40
CD-ROM 128
Cell broadcast messages 71
Cell info display 91
Certificates 89
Trust settings 90
Charges
Packet data 82
Clearing memory
Calendar entries 132
Log information 132
Clip
See Video recorder
Clock 107
Alarm 107
Settings 107
Computer connections 128
Conference calls 22
Connecting to a PC 128
Connection
Viewing 127
Connection indicators
Bluetooth 124
Data connections 15
Infrared 126
Connection Manager 127
Connection settings 81
Contact cards
Adding voice tags 30
Assigning default numbers and
addresses 29
Assigning speed dialling numbers
31
Attaching ringing tones 32
Changing voice tags 31, 95
Deleting voice tags 31, 95
Inserting images 29
Listening to voice tags 31, 95
Remote synchronisation 130
Removing ringing tones 32
Voice tags 30
Contact groups 32
Adding ringing tones 32
Contacts
Data Import 38
Converter 105
Adding exchange rates 106
Converting currencies 106
Converting units 105
Copying
Contacts between the SIM card
and phone memory 28
Text 55
Creating
Contact cards 28
Cutting
Text 56
Data connections
Indicators 15
Settings 81
Data connections to network
Ending 128
Viewing 127
Data Import
Contacts 38
Date, settings 86
Deleting
Calendar entries 34
145
r1013_en.book Page 146 Tuesday, September 2, 2003 8:07 AM
Delivery reports 51
Dialled numbers 26
Digital rights management 116
Display settings 79
Diverting calls 23
Downloading files to the Gallery 48
Editing
Calendar entries 34
Contact cards 29
Text 52
Themes 98
E-mail 60
Attachments 68
Deleting 70
Offline 67
Online 66
Opening 68
Remote mailbox 66
Retrieving from mailbox 67
Saving attachments 69
Settings 74
Emergency calls 141
Enhancements
Settings 91
Erasing
Log 27
Recent calls register 26
Favourites
Adding a shortcut 100
File formats
RealOne Player 45
SIS file 118
File manager 91
Files
Finding 92
Opening 48
Fixed dialling 88
Folders
146
Creating 18
Opening 48
Organising 18
Gallery 47
Downloading files from the
Internet 48
Folders 48
Picture messages 48
Uploading images 49
Games 108
General settings 78
GIF animations 42
Go to 99
GPRS
See Packet data
GPRS connections 127
GSM data connections 127
Handsfree
See Loudspeaker
Headset 20
Help 17
Idle state
See Standby mode
Image modes 41
Image server 49
Images 48
Adding to a contact card 29
Full screen 43
Keyboard shortcuts when viewing
images 43
Memory consumption 41
Moving the focus 43
Rotating 43
Wallpapers folder 48
Zooming 43
Importing data from other Nokia
phones 38
r1013_en.book Page 147 Tuesday, September 2, 2003 8:07 AM
in 35
Indicators 14
Data connections 15
Info service 71
Infrared 126
Installing applications 119
Installing Java files 119
Internet access points (IAP)
See Access points
ISP
See Internet service provider
Java
Installing Java applications 119
See Applications.
Keyguard 20
Language
for writing 78
Listening to messages 22
Lock code 87
Log
Erasing contents 27
Filtering 27
Recent calls 25
Settings 27
Loopset
Activating 91
Loudspeaker 19
Activating 19
Turning off 20
Mailbox 66
Disconnecting 68
Making calls 21
Media files
File formats 45
Mute 46
Playing 46
Seek 46
Media gallery 47
Background images 48
Memory
Viewing memory details 92
Memory card 109
Backup 109
Consumption 110
Format 109
Password 109
Restore 109
Unlock 110
Video clips 109
Memory low
Troubleshooting 132
Viewing memory consumption
110
Menu 15
Menu key 15
Rearranging the main Menu 16
Messaging
Delivery reports 51
Inbox 62
Main view 50
Messages on the SIM card 71
Multimedia messages 58
My folders 65
Outbox 70
Picture messages 58
Sent folder settings 76
Settings 72
Text messages 57
Writing e-mail 60
Writing text 52
Missed calls 25
Mobile browser 111
Modem
Using your phone as a modem 129
Multimedia messages 58
Creating 59
Playing sounds 63
147
r1013_en.book Page 148 Tuesday, September 2, 2003 8:07 AM
Viewing 63
Multimedia presentation
Viewing 63
Music files
See Media files
Mute 46
My folders 65
Notes 106
Playing media files 46
Predictive text input 53
Tips 54
Turning off 55
Prices for packet data 82
Profiles 96
Adding voice tags 94
Renaming 97
Settings 97
Offline 67
Online 66
Opening 48
Organising
Menu 16
Outbox 70
Packet data 82
Connection timer 27
Data counter 27
Pricing 82
Settings 86
Pairing, glossary explanation 124
Password
Memory card 109
Pasting
Text 56
PC Suite 128
Personal notes 102
Personalisation 98
Personalise 98
Alarm 107
Calendar alarm tone 36
Phonebook
See Contacts
Picture messages 48
Pictures 48
Taking 39
PIN code 87
Unblocking 87
148
RealOne Player 45
File formats 45
Playing media files 46
Settings 46
Streaming 46
Received calls 25
Receiving
Data via Bluetooth 125
Data via infrared 126
Ringing tones, Operator logos, and
settings, see Smart messages
Recent calls register 25
Call duration 26
Dialled numbers 26
Erasing call lists 26
Missed calls 25
Received calls 25
Recorder, recording sounds 108
Recording video 44
Recording voice commands 94
Recording voice tags 30
Rejecting calls 23
Remote mailbox 66
Disconnecting 68
Remote synchronisation 129
Removing an application 120
Removing software 120
Reports 51
Ringing tones 96
Adding a personal ringing tone 32
Muting 23
r1013_en.book Page 149 Tuesday, September 2, 2003 8:07 AM
Receiving in a smart message 64
Settings 97
Safety information
Care and maintenance 138
Electronic devices 139
Emergency calls 141
Operating environment 139
Potentially explosive atmospheres
140
Traffic safety 139
Vehicles 141
Saving wallpapers 48
Screen saver
Settings 79
Search
Files 92
Search field 18
Security
Access codes 87
Security certificates 89
Settings 87
Seek 46
Self-timer (camera) 40
Sending
Data via Bluetooth 122
Data via infrared 126
Service command editor 71
Service provider for data connections,
glossary explanation 81
Services (Mobile browser) 111
Settings 78
Access codes 87
Applications (Java™) 120
Bluetooth 122
Browser service messages 76
Calendar 36
Call barring 90
Call diverting 24
Camera 40
Certificates 89
Clock 107
Connection 81
Date and time 86
Device settings 78
Display 79
E-mail 74
Enhancements 91
Fixed dialling 88
General 78
Info service 76
Lock code 87
Log 27
Messaging 72
Messaging, Sent folder 76
PIN code 87
RealOne Player 46
Security 87
Sounds 97
Text messages 72
Video recorder 44
Wallet 104
Shared memory 20
Shortcuts
in Favourites 100
in Images 43
SIM card
Copying names and numbers 28
Messages 71
SIS file 118
Smart messages
Receiving 64
Snooze 107
Software
Removing 120
Transferring a .SIS file to your
phone 119
Sound clips 48
Sound files
See Media files
Sounds 96
Removing a personal ringing tone
149
r1013_en.book Page 150 Tuesday, September 2, 2003 8:07 AM
32
Speed dialling 31
Making calls 22
Standby mode 13
Indicators 14
Settings 79
Stopping
Alarm clock 107
Calendar alarm 37
Storing data 132
Switching between applications 16
Synchronisation
See Remote synchronisation.
SyncML
See Remote synchronisation.
Taking pictures 39
Text input 52
Text messages 57
Writing and sending 57
Text templates 65
Themes 98
Editing 98
Restoring 99
Thumbnails
In a contact card 29
Tickets 104
Time, settings 86
To do 37
To-do 37
Tones 96
Traditional text input 52
Transferring calls 24
Troubleshooting 132
Unit converter 105
Uploading images 49
USSD commands 71
Video clips 48
150
See Media files
Video player
See RealOne Player
Video recorder 43
Memory card 45
Saving video clips 44
Settings 44
Viewing
Connection details 127
GIF animations 42
Multimedia presentations 63
Network data connection details
127
Voice commands 93
Adding 94
Starting applications 94
Voice dialling 30
Voice mailbox 22
Changing the number 22
Diverting calls to voice mailbox 24
Voice messages 22
Voice recorder 108
Voice tags 30
Adding 30
Changing 31, 95
Deleting 31, 95
Listening 31, 95
Making calls 31
Volume control 19
Wallet 101
Creating a wallet profile 103
Creating personal notes 102
Entering the Wallet code 101
Reset 104
Retrieving data into browser 104
Settings 104
Storing card details 102
Viewing ticket details 104
Wallet code 101
Reset 104
r1013_en.book Page 151 Tuesday, September 2, 2003 8:07 AM
Wallet profile 103
WAP pages
Browser 111
Writing 52
Predictive text input 53
Predictive text input, turning off
55
Traditional text input 52
XHTML pages
Browser 111
Zooming 43
151

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2003:09:02 07:09:26Z
Modify Date                     : 2003:09:05 15:05:39+09:00
Page Count                      : 71
Creation Date                   : 2003:09:02 07:09:26Z
Mod Date                        : 2003:09:05 15:05:39+09:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : cheer
Metadata Date                   : 2003:09:05 15:05:39+09:00
Creator                         : cheer
Title                           : r1013_en.book
Has XFA                         : No

EXIF Metadata provided by EXIF.tools