Microsoft NHL-4 GSM PCS1900 Cellular Telephone User Manual

Microsoft Mobile Oy GSM PCS1900 Cellular Telephone Users Manual

Contents

Users Manual 1

Nokia 7210 User Guideen7210.1ug9354677.book Page 1 Tuesday, August 20, 2002 1:03 PM
Phone notesMy Nokia 7210 information Information sourceMy number Wireless providerInternational Mobile Equipment Identifier (IMEI)On back of your phone, beneath the batteryVoicemail number Wireless providerWireless provider customer care Wireless providerMessage center number Wireless providerDefault recipient number (e-mail gateway number) Wireless provideren7210.1ug9354677.book Page 2 Tuesday, August 20, 2002 1:03 PM
The wireless phone described in this guide is approved for use in GSM 900, 1800, and 1900 networks.LEGAL INFORMATIONPart No. 9354676, Issue No. 1Copyright ©2002 Nokia Corporation. All rights reserved.Nokia, Nokia Connecting People, and the Nokia Original Accessories logos are trademarks or registered trademarks of Nokia.Printed in Canada 9/2002US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-2002. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java is a trademark of Sun Microsystems, Inc.The information contained in this user guide was written for Nokia model 7210 phone. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior noticeUNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLSThis product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited.FCC/INDUSTRY CANADA NOTICEYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be en7210.1ug9354677.book Page 3 Tuesday, August 20, 2002 1:03 PM
eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.en7210.1ug9354677.book Page 4 Tuesday, August 20, 2002 1:03 PM
[ i ]Contents1Safety first . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1About accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22An overview of functions. . . . . . . . . . . . . . . . . . . . . . . . . . .4Multimedia messaging service (MMS). . . . . . . . . . . . . . . . . . . . . . . . . . . .4Polyphonic sound (MIDI). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4General Packet Radio Service (GPRS). . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Speakerphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5MIDP JavaTM applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5FM stereo radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53Welcome and quick guide . . . . . . . . . . . . . . . . . . . . . . . . . .6Get the most out of this guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Understand wireless network services. . . . . . . . . . . . . . . . . . . . . . . . . . . .7Register your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7E-Newsletters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Understand your phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Get started with the Quick Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Menu shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Get help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Switch your phone on or off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17Check the start screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Use the selection and scroll keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Browse phone menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .214Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Set the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Make and answer calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Call and setup your voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Options during a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Set up your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .305Text entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Standard mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33en7210.1ug9354677.book Page i Tuesday, August 20, 2002 1:03 PM
[ ii ]predictive text input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 346Manage phone security . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Security levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Fixed dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Access codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 407The Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43View the Phone book menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Save names and numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Copy Phone book entries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 471-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49View Info, Service, and Own numbers . . . . . . . . . . . . . . . . . . . . . . . . . . 508Menu functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Messages menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Tips for composing a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Write and send a text message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Picture messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Multimedia messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Automate voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Message options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Organize messages with folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Delete messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Call log (Menu 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Call log options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80View missed calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81View received calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81View dialed numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Clear call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82View call duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Profiles (Menu 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84en7210.1ug9354677.book Page ii Tuesday, August 20, 2002 1:03 PM
[ iii ]Select a profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84Customize a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84Set a timed profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85Settings (Menu 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96Tone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98Alarm clock (Menu 5) . . . . . . . . . . . . . . . . . . . . . . . . . . .101Set an alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101Turn off an alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102Radio (Menu 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103Turn the radio on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103Use the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103Save a radio channel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104Gallery (Menu 7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105Open the Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105View folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106Organizer (Menu 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107The Monthly view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107Go to a date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108Send a Calendar note to another device . . . . . . . . . . . . . . . . . . . . . . . .110Make a to-do list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111Games (Menu 9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113Launch a game. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113Applications (Menu 10). . . . . . . . . . . . . . . . . . . . . . . . . .115Launch an application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115Application options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116Download applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116en7210.1ug9354677.book Page iii Tuesday, August 20, 2002 1:03 PM
[ iv ]Extras (Menu 11) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Use the calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Use the currency converter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Use the countdown timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Use the stopwatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Connectivity (Menu 12) . . . . . . . . . . . . . . . . . . . . . . . . . 124Infrared. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124GPRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125Nokia PC Suite™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Download PC Suite software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Services (Menu 13). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Notes on wireless Internet access . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Set up for browsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Sign on to the wireless Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Use browser options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130Navigate the wireless Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130Use bookmarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132GPRS icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1339Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13610 Referenceinformation. . . . . . . . . . . . . . . . . . . . . . . . . . . 139Batteries and chargers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139Important safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14111 Care and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . 147Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14812 Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . 14913 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15214 Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . 15415 Nokia One-Year Limited Warranty. . . . . . . . . . . . . . . . . . 155en7210.1ug9354677.book Page iv Tuesday, August 20, 2002 1:03 PM
[ v ]Appendix A (A message from the CTIA) . . . . . . . . . . . . . . . .161Appendix B (A message from the FDA). . . . . . . . . . . . . . . . .165Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172en7210.1ug9354677.book Page v Tuesday, August 20, 2002 1:03 PM
[ vi ]en7210.1ug9354677.book Page vi Tuesday, August 20, 2002 1:03 PM
1[ 1 ]1Safety firstRead these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual.Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTDon't use a hand-held phone while driving.INTERFERENCEAll wireless phones may get interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any regulations or rules. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTWireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELLINGDon't use the phone at a refuelling point. Don't use near fuel or chemicals.SWITCH OFF NEAR BLASTINGDon't use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.USE SENSIBLYUse only in the normal position. Don't touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair phone equipment.en7210.1ug9354677.book Page 1 Tuesday, August 20, 2002 1:03 PM
[ 2 ]1OBSERVE INFRARED PRECAUTIONSDo not point the IR beam at anyone’s eyes or allow it to interfere with other IR devices.ACCESSORIES AND BATTERIESUse only approved accessories and batteries. Do not connect incompatible products.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user's guide for detailed safety instructions. Do not connect incompatible products.BACKUP COPIESRemember to make backup copies of all important data.WATER-RESISTANCEYour phone is not water-resistant. Keep it dry.CALLINGEnsure the phone is switched on and in service. Enter the phone number, including the area code, then press t. To end a call, press e. To answer a call, press t.EMERGENCY CALLSEnsure the phone is switched on and in service. Press e as many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Enter the emergency number, then press t. Give your location. Do not end the call until told to do so. • ABOUT ACCESSORIESCheck the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-12 and LCH-9.en7210.1ug9354677.book Page 2 Tuesday, August 20, 2002 1:03 PM
1[ 3 ]Safety firstWarning: Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. The use of any other types may invalidate any approval or warranty applying to the phone, and may be dangerous.For availability of approved accessories, please check with your dealer.When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.en7210.1ug9354677.book Page 3 Tuesday, August 20, 2002 1:03 PM
[ 4 ]22An overview of functions • MULTIMEDIA MESSAGING SERVICE (MMS)Your phone is able to send and receive multimedia messages made up of text and pictures. You may also be able to receive polyphonic ringing tones. You can also save pictures and ringing tones to personalize your phone. See “Multimedia messages” on page63 for more information. • POLYPHONIC SOUND (MIDI)Polyphonic sounds are used in ringing tones and message alert tones. They consist of several sound components played at the same time, like an actual melody through a speaker. Your phone has sound components from over 40 instruments that can be used for polyphonic sounds but the phone can play four instruments simultaneously. The phone supports Scalable Polyphonic MIDI (SP-MIDI) format.You can receive polyphonic ringing tones via multimedia service, (see “Read and reply to a multimedia message” on page67), or download them via the gallery menu, see “Gallery (Menu 7)” on page105 for more information. • GENERAL PACKET RADIO SERVICE (GPRS)GPRS technology allows mobile phones to send and receive data over a mobile network. Applications such as WAP, MMS, text messaging, and JavaTM use GPRS. Your phone supports up to three simultaneous GPRS connections.For more information on GPRS, see “GPRS” on page125. Also, consult the PC Connectivity Guide. The PC Connectivity guide, Nokia PC Suite, and all related software can be downloaded from the U.S. Mobile Phone products section of www.nokia.com.en7210.1ug9354677.book Page 4 Tuesday, August 20, 2002 1:03 PM
2[ 5 ]An overview of functionsBefore you can use GPRS technology•Contact your network operator or service provider for availability and subscription to the GPRS service.•Save the GPRS settings for each of the applications used over GPRS.PRICING FOR GPRS AND APPLICATIONSYour wireless provider may charge for GPRS services. For more information on pricing, contact your wireless provider. • SPEAKERPHONEYou can use your phone as a speakerphone during a call.•To activate the speakerphone, press Loudsp.•To deactivate the speakerphone during a call Handset.The speakerphone deactivates when you end the call or call attempt or when you connect a headset. • MIDP JAVATM APPLICATIONSYour phone supports JavaTM and includes some Java applications and games that have been specially designed for mobile phones. You may be able to download new applications and games to your phone from a PC with a Java installer software or from some Mobile Internet services. See “Applications (Menu 10)” on page115 for more information. • FM STEREO RADIOYour phone has an integrated FM stereo radio. You can listen to the radio through a headset or the handsfree speaker (with the headset attached). See “Radio (Menu 6)” on page103 for more information.en7210.1ug9354677.book Page 5 Tuesday, August 20, 2002 1:03 PM
[ 6 ]33Welcome and quick guideCongratulations on your purchase of the Nokia 7210 mobile phone. Your phone provides many functions which are practical for daily use, such as a Calendar, Radio, Alarm clock, Calculator, and more. A variety of Xpress onTM color covers is also available. Your phone can also connect to a PC, laptop, or other device using the data cable or built-in IR port. For more information on connectivity, refer to the PC Connectivity Guide. The PC Connectivity guide, Nokia PC Suite, and all related software can be downloaded from the U.S. Mobile Phone products section of www.nokia.com. • GET THE MOST OUT OF THIS GUIDEThe tips that follow can help you get the most from this guide as you learn to use your phone.Learn text conventionsThis user guide provides text clues to help make instructions clear and easy to follow. These clues are called conventions.Follow graphic cluesThis guide uses certain icons to alert you to important information.Tip: Indicates a shortcut or alternate method of doing something.Note: Explains a feature or points out an important concept.Convention What it meansbold The word or phrase appears on the phone’s displaybold and blue The text refers to an address on the world wide webitalics Indicates emphasis. Pay close attention to any information in italicsen7210.1ug9354677.book Page 6 Tuesday, August 20, 2002 1:03 PM
3[ 7 ]Welcome and quick guideImportant:Indicates critical information on using a feature.Caution: Warns when you may lose information.Warning:Helps you avoid personal injury, damage to the phone, or property damage.59Access alternate formatsThis user guide is available in alternate formats, such as Braille, Large print, Audiocassette, and E-text (documents on disk, in Microsoft Word or WordPerfect format).Look for updatesFrom time to time, Nokia updates this guide to reflect changes. The latest version may be available at www.nokia.com.Also, an interactive tutorial may be available at www.nokiahowto.com. • UNDERSTAND WIRELESS NETWORK SERVICESThe wireless phone described in this guide is approved for use on the GSM 900, GSM 1800 and GSM 1900 network.A number of features in this guide are called Network Services. These are special services that you arrange through your wireless service provider. Before you can take advantage of any of these Network Services, you must subscribe to them through your wireless provider and obtain instructions for their use from your service provider. • REGISTER YOUR PHONEMake sure to register your phone at www.warranty.nokiausa.com or 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should need to call the center or have your phone repaired. • E-NEWSLETTERSWhen you register your phone, you can sign up for Nokia's e-newsletter Nokia Connections if you would like. You will receive tips and tricks on using your phone, accessory information, and special offers.en7210.1ug9354677.book Page 7 Tuesday, August 20, 2002 1:03 PM
[ 8 ]3 • UNDERSTAND YOUR PHONEPower keyVolume keys4-way scroll keysLeft select key Right select keyEnd keyTalk keyDisplay screenEarpieceNumber keysIR PortMicrophonePop-PortTM connectorCharger jack4-way scroll keys+-en7210.1ug9354677.book Page 8 Tuesday, August 20, 2002 1:03 PM
3[ 9 ]Welcome and quick guideUse the antennaYour phone has a built-in antenna. As with any other radio transmitting device, avoid touching the antenna while the phone is powered up.Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than necessary. Hold the phone as you would any other telephone with the antenna area pointed up and over your shoulder.Use the batteryCHARGE THE BATTERY1Plug the charger transformer in to a standard AC outlet.2Insert the charger output jack into the round connector at the bottom end of the phone.After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely flat, it may take a few minutes before the charging indicator appears on the display or any calls can be made.Tip: You can use the phone while the charger is connected.IMPORTANT BATTERY INFORMATIONImportant:Your phone is powered by a rechargeable battery.Use only batteries approved by Nokia and recharge your battery only with the chargers approved by Nokia. Never use any charger or battery which is damaged.The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery.The BLD-3 battery doesn't need a full discharge before recharging.en7210.1ug9354677.book Page 9 Tuesday, August 20, 2002 1:03 PM
[ 10 ]3PROLONG THE BATTERYUse the following guidelines to obtain the best performance from your battery:•With your phone turned off, charge your new battery for three hours before its first use. Use the battery until it is fully discharged. Repeat this procedure twice for a total of three charging cycles.•Note that a new battery's full performance is achieved only after two or three complete charge and discharge cycles. Battery operation time may be less than the estimated times during the first charges. This condition is normal.•You can use your phone while the battery is charging. However, if the battery is completely empty, it may need to recharge a few minutes before you can make or receive calls or the battery indicator appears.•After the first charge, you can make and receive calls during the charging cycle, but the calls interrupt the charge. When the phone call ends, the charge will resume.•The bars on the screen stop scrolling and remain constant when the phone is fully charged. If you leave the phone connected to the charger, the battery receives an additional charge. If you switch the phone on when charging is complete, the message Battery full momentarily appears in the display.Note: The battery will accept a "trickle charge" for an additional two hours.Charging time depends on the charger and the battery used. For example, charging a BLD-3 battery with the ACP-12 charger takes about one hour and 30 minutes in standby mode.en7210.1ug9354677.book Page 10 Tuesday, August 20, 2002 1:03 PM
3[ 11 ]Welcome and quick guideREMOVE THE BACK COVER1With the back of the phone facing you, push the back cover release button.2Lift the bottom of the back cover to remove.REMOVE THE BATTERY3After you’ve removed the back cover, insert your finger into the finger grip and lift the battery from its compartment.Install the SIM cardWarning: Keep all SIM cards out of reach of small children.•The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting or removing the card.•Before installing the SIM card, always make sure that the phone is switched off and that you’ve removed the cover and battery.1Slide the SIM card holder toward the bottom end of the phone until it unlocks.2Swing the SIM card holder open.1212en7210.1ug9354677.book Page 11 Tuesday, August 20, 2002 1:03 PM
[ 12 ]33Insert the SIM card into the holder, (beveled corner last) and the gold contacts facing toward the top end of the phone.4Close the SIM card holder.5Slide the SIM card holder toward the top end of the phone until it locks into place.REPLACE THE BATTERYThe SIM card must be installed before installing the battery.1Position the battery so the gold contacts match up with those on the phone. The battery label should be facing away from the phone.2Insert the battery, contact end first into the battery slot.3Snap the other end of the battery into place.REPLACE THE BACK COVER1Place the top of the back cover to the locking catch in the top of the phone. 2Position the back cover over the locking catches on the both sides of the phone and press down to lock the cover into place.345en7210.1ug9354677.book Page 12 Tuesday, August 20, 2002 1:03 PM
3[ 13 ]Welcome and quick guideShared memorySome features in your Nokia 7210 phone, including Calendar notes, To-do list, WAP cache, WAP bookmarks, and WAP security cache and certificates use a common pool of memory (storage capacity) called shared memory. When any of these features are used, there is less available memory for other features which are also dependent on shared memory. This is especially true with heavy use. For example, entering 250 calendar notes, saving multiple WAP bookmarks and entering several items in your To-do list may consume most of the available shared memory. Consequently, if you attempt to download a WAP bookmark into your phone, a message saying Memory full may appear. To proceed, you would need to delete some of the items/information occupying the available dynamic memory.en7210.1ug9354677.book Page 13 Tuesday, August 20, 2002 1:03 PM
[ 14 ]3 • GET STARTED WITH THE QUICK GUIDE Make a call Enter phone number, press tAnswer a call Press Answer or tAnswer a call with a call waiting Press t or Options and select Answer callEnd a call Press eIgnore a call Press Silence when your phone ringsRedial last number Press t twiceAdjust call volume Press up or down on the side volume keyUse the in-call menu While in a call, press OptionsUse 1-touch dialing Press and hold any key 2 through 9 Save a name and number Enter a number, press Options and select Save, then enter a name and press OKRecall a name/number Press Names, select Find. Enter name and press Find or ListCheck voice mail Press and hold 1 OR dial your voice mailbox numberWrite and send a text message Press Menu 01-1-1. After a pause, write the message.Press Options, scroll to Send, press Select, enter the recipient’s number, press OKWrite and send an E-mail message Press Menu 01-1-2. After a pause, enter the recipient’s e-mail address. Press OK, enter a subject, and press OK. Write your e-mail message, press Options, scroll to Send e-mail and press Select. Enter the e-mail server number if necessary and press OK. Your e-mail is sent.Read a new message Press Show, then press SelectReply to a message Press Options, select Reply, write the reply, press Options, select Send, and press OKReply to an E-mail message Press Options, scroll to Reply, and press Select. Compose your message and press Options. Scroll to Sending options and press Select. Scroll to Sending profile and press Select. Highlight your email profile and press Select. Press Options, Accept, enter the e-mail address, press OK.Send a business card Recall a name from the phone book. Press Details, then press Options, scroll to Send bus. card, scroll to Via text message and press Select. Enter the recipient’s number or press Find to retrieve a number from the Phone book. Press OK. The business card is sent.en7210.1ug9354677.book Page 14 Tuesday, August 20, 2002 1:03 PM
3[ 15 ]Welcome and quick guide • MENU SHORTCUTS1MESSAGES Text messages. . . . . . . . . . .01-1-1Multimedia messages. . . . . . 01-2Chat. . . . . . . . . . . . . . . . . . . . 01-3Voice messages. . . . . . . . . . . 01-4Info messages. . . . . . . . . . . . 01-5Message settings . . . . . . . . . 01-6Service commands . . . . . . . . 01-72CALL LOG Missed calls. . . . . . . . . . . . . . . 2-1Received calls . . . . . . . . . . . . . 2-2Dialed numbers. . . . . . . . . . . . 2-3Delete recent call lists . . . . . . 2-4Call timers. . . . . . . . . . . . . . . . 2-5Call costs. . . . . . . . . . . . . . . . . 2-6GPRS Data counter. . . . . . . . . 2-7GPRS Connection timer . . . . . 2-83PROFILES Normal . . . . . . . . . . . . . . . . . . 3-1Silent. . . . . . . . . . . . . . . . . . . . 3-2Meeting. . . . . . . . . . . . . . . . . . 3-3Outdoor. . . . . . . . . . . . . . . . . . 3-4Pager . . . . . . . . . . . . . . . . . . . . 3-54SETTINGS Time and date settings. . . . . . 4-1Call settings . . . . . . . . . . . . . . 4-2Phone settings . . . . . . . . . . . . 4-3Display settings . . . . . . . . . . . 4-4Tone settings. . . . . . . . . . . . . . 4-5Security settings. . . . . . . . . . . 4-6Restore factory settings. . . . . 4-85ALARM CLOCK 6RADIO 7GALLERY View folders. . . . . . . . . . . . . . . 7-1Delete folder . . . . . . . . . . . . . . 7-2Rename folder. . . . . . . . . . . . . 7-3Add folder . . . . . . . . . . . . . . . . 7-4Gallery services . . . . . . . . . . . . 7-58ORGANIZER Calendar. . . . . . . . . . . . . . . . . . 8-1To-do list . . . . . . . . . . . . . . . . . 8-29GAMES Select game. . . . . . . . . . . . . . . 9-1Game services . . . . . . . . . . . . . 9-2Memory . . . . . . . . . . . . . . . . . . 9-3Settings . . . . . . . . . . . . . . . . . . 9-410 APPLICATIONS Select application . . . . . . . . . 10-1App. services . . . . . . . . . . . . . 10-2Memory . . . . . . . . . . . . . . . . . 10-311EXTRAS Calculator . . . . . . . . . . . . . . . 11-1Countdown timer . . . . . . . . . 11-2Stopwatch . . . . . . . . . . . . . . . 11-312 CONNECTIVITY Infrared . . . . . . . . . . . . . . . . . 12-1GPRS. . . . . . . . . . . . . . . . . . . . 12-213 SERVICES Home . . . . . . . . . . . . . . . . . . . 13-1Bookmarks . . . . . . . . . . . . . . . 13-2Service inbox. . . . . . . . . . . . . 13-3Settings . . . . . . . . . . . . . . . . . 13-4 Go to address. . . . . . . . . . . . . 13-5Clear the cache . . . . . . . . . . . 13-6en7210.1ug9354677.book Page 15 Tuesday, August 20, 2002 1:03 PM
[ 16 ]3 • GET HELPFind your phone’s labelIf you need help, Nokia Customer Care is available for assistance. Before calling, however, please read “Frequently Asked Questions” on page149.We also recommend that you write down the following information and have it available if you call. The information can be found on back of the phone, beneath the battery.•The International Mobile Equipment Identifier (IMEI)•We also ask that you write down your zip code.Contact NokiaPlease have your phone or accessory with you when contacting either of the numbers below.Nokia Customer Care Center, USA Customer Interaction Center, CanadaNokia, Inc.7725 Woodland Center Boulevard Suite #150Tampa, Florida 33614Tel: 1-888-NOKIA2U (1-888-665-4228)Fax: 1-813-249-9619TTY: 1-800-24NOKIA (hearing impaired only) (1-800-246-6542)Nokia Products Ltd.601 Westney Road SouthAjax, Ontario L1S 4N7Tel: 1-888-22NOKIA (1-888-226-6542)Fax: 1-905-427-1070Information labelen7210.1ug9354677.book Page 16 Tuesday, August 20, 2002 1:03 PM
3[ 17 ]Welcome and quick guideContact your service providerTo use the network services available in your phone, you’ll need to sign up with a wireless provider. In many cases, the wireless provider will make available descriptions of their services and instructions for using features such as:•Voice mail and voice privacy•Call waiting, call forwarding, and caller ID•Messaging•News and information services•Selected Internet servicesWireless providers may differ in their support of features. Before you sign up, make sure a wireless provider supports the features that you need.Receive accessibility informationNokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information, visit the Nokia World Wide Web site www.nokiaaccessibility.com. • SWITCH YOUR PHONE ON OR OFFWarning:Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.1To turn your phone on or off, press and hold the power key on top of the phone for at least 3 seconds.If the phone displays Insert SIM card even though the SIM card is properly inserted, or SIM card not supported, contact your wireless provider.2Enter the PIN code if necessary and press OK.3Enter the security code if necessary and press OK.en7210.1ug9354677.book Page 17 Tuesday, August 20, 2002 1:03 PM
[ 18 ]3Note: If the language that appears in your display is not correct, see “Set the display language” on page93 for information on changing your phone’s display language. • CHECK THE START SCREENThe Start screen is “home base” and indicates your phone is in idle mode.What’s on the Start screenHOME Your wireless provider’s name may appear hereSignal strength A higher bar indicates a stronger network signalBattery level A higher bar indicates more power in the batteryLLeft selection key; press this key when Menu is on the Start screen to enter the menu listRRight selection key; press this key when Names is on the Start screen to enter the Phone booku or d Scroll keys; press either of these keys at the Start screen to display any entries in your Phone bookBattery levelNamesSignal strengthMenuen7210.1ug9354677.book Page 18 Tuesday, August 20, 2002 1:03 PM
3[ 19 ]Welcome and quick guideUnderstand indicators and iconsIcon Indicates...You have one or more text or picture messages. See “Reply to a message or e-mail” on page62.You have one or more multimedia messages. See “Read and reply to a multimedia message” on page67You have one or more voice messages. See “Voice messages” on page69Your phone’s keypad is locked, see “Lock the keypad (Keyguard)” on page37.Your phone is set to the Silent profile. “Profiles (Menu 3)” on page84The alarm clock is set to On. See “Alarm clock (Menu 5)” on page101The countdown timer is running. See “Use the countdown timer” on page119The stopwatch timing is running in the background, see “Use the stopwatch” on page121A GPRS dial-up connection is established, see “GPRS dial-up connections” on page126You have an incoming or outgoing call during a GPRS dial-up connection. GPRS is suspended IR connection indicator, see “Infrared” on page124Forward all voice calls. All calls are forwarded to another number. If you have two phone lines, the indicator for line 1 is and for line 2 or If you have two phone lines, indicates the selected phone line. See “Phone settings” on page93en7210.1ug9354677.book Page 19 Tuesday, August 20, 2002 1:03 PM
[ 20 ]3 • USE THE SELECTION AND SCROLL KEYSBelow each corner of the display are the selection keys. Press L when Menu appears above it to show the first of numerous menus. Page through the rest of the menus using the up and down scroll keys (ud). Press R when Names appears above it to enter the Phone book.Tip: Press an up or down scroll key (ud) from the Start screen to view any entries in your Phone book.Use four-way scrollingIn features, such as the calendar monthly view, text messages, and special characters, you can move the cursor up and down as well as left and right. To move the cursor:Integrated handsfree is active, see “Speakerphone” on page5Calls are limited to a closed user group; see “Closed user groups” on page42The timed profile is selected, see “Profiles (Menu 3)” on page84, or A headset, handsfree or loopset accessory is connected to the phone.Left, press lUp, press uDown, press dRight, press rIcon Indicates...RightselectLeftselecten7210.1ug9354677.book Page 20 Tuesday, August 20, 2002 1:03 PM
3[ 21 ]Welcome and quick guide • BROWSE PHONE MENUSYour phone's features are grouped according to function and are accessed through your phone's main menus. Each main menu contains submenus and lists from which you can select or view items, and customize your phone's features. You can access these menus and submenus by using the scroll method or by using a shortcut.Note: Some features may not be available, depending on your network. For more information, contact your wireless provider.Use the scroll method1At the Start screen, press Menu, then scroll through the main menus using the up and down scroll keys (ud).As you scroll through the menus, the menu number appears in the upper right corner of the display. Below the menu number is a scroll bar with a tab. The tab moves up or down as you scroll through the menus, providing a visual representation of your current position in the menu structure2When you arrive at a menu, press Select (L) to enter that menu’s submenus.•Press Back (R) to return to the previous menu•Press e to return to the Start screen from any menu or submenuUse a shortcutYou can go directly to almost any menu or submenu, as well as activate most features by using a shortcut.•Press Menu, then within 3 seconds, press the key or keys associated with the menu function you’d like to view or activate.For example, to select the Meeting profile, press Menu 3-3-1 from the Start screen (Menu - 3Profiles - 3Meeting - 1Select). After a brief en7210.1ug9354677.book Page 21 Tuesday, August 20, 2002 1:03 PM
[ 22 ]3pause, the Meeting profile is activated.A complete list of shortcuts begins on the following page.Check in-phone helpMany features have brief descriptions (help text) which can be viewed on the display. To view these descriptions, scroll to a feature and wait for about 10 seconds. Press More to view all of the description (if necessary), or press Back to exit.ACTIVATE OR DEACTIVATE HELP TEXT1At the Start screen, press Menu 4-3-7 (Settings > Phone settings > Help text activation).2After a brief pause, On and Off appear in the display.3Scroll to On or Off and press Select. A confirmation message appears in the display indicating your selection.en7210.1ug9354677.book Page 22 Tuesday, August 20, 2002 1:03 PM
3[ 23 ]Welcome and quick guideMenu shortcuts1MESSAGESTEXT MESSAGES. . . . . . . .01-1Write message . . . . . . . .01-1-1Write e-mail. . . . . . . . . .01-1-2Inbox . . . . . . . . . . . . . . . .01-1-3Sent items. . . . . . . . . . . .01-1-4Archive . . . . . . . . . . . . . .01-1-5Templates . . . . . . . . . . . .01-1-6My folders. . . . . . . . . . . .01-1-7Delete messages. . . . . . .01-1-8MULTIMEDIA MSGS . . . . . . 01-2Write message . . . . . . . .01-2-1Inbox . . . . . . . . . . . . . . . .01-2-2Outbox . . . . . . . . . . . . . .01-2-3Sent items. . . . . . . . . . . .01-2-4Saved items . . . . . . . . . .01-2-5Delete messages. . . . . . .01-2-6CHAT . . . . . . . . . . . . . . . . . 01-3VOICE MESSAGES. . . . . . . . 01-4Listen to voice messages. . . . . . . .01-4-1Voice mailbox number. .01-4-2INFO MESSAGES. . . . . . . . . 01-5Info service . . . . . . . . . . .01-5-1Topics . . . . . . . . . . . . . . .01-5-2Language . . . . . . . . . . . .01-5-3Info topics saved on SIM card . . . . .01-5-4Read (if received only). .01-5-5MESSAGE SETTINGS . . . . . . 01-6Text messages. . . . . . . . .01-6-1Multimedia msgs.. . . . . .01-6-2Other settings. . . . . . . . .01-6-3SERVICE COMMANDS. . . . . 01-72CALL LOGMISSED CALLS . . . . . . . . . . . . . . . . . 2-1RECEIVED CALLS . . . . . . . . . 2-2DIALED NUMBERS . . . . . . . . 2-3DELETE RECENTCALL LISTS. . . . . . . . . . . . . . 2-4All. . . . . . . . . . . . . . . . . . . 2-4-1Missed . . . . . . . . . . . . . . . 2-4-2Received. . . . . . . . . . . . . . 2-4-3Dialed. . . . . . . . . . . . . . . . 2-4-4CALL TIMERS. . . . . . . . . . . . 2-5Duration of last call . . . . 2-5-1Duration of dialed calls . 2-5-2Duration of received calls2-5-3All calls’ duration . . . . . . 2-5-4Clear timers. . . . . . . . . . . 2-5-5CALL COSTS. . . . . . . . . . . . . 2-6Last call units . . . . . . . . . 2-6-1All calls’ units . . . . . . . . . 2-6-2Call cost settings. . . . . . . 2-6-3GPRS DATA COUNTER . . . . . 2-7Data sent in last session. 2-7-1Data received in last session . . . . . . . . . 2-7-2All sent data . . . . . . . . . . 2-7-3All received data. . . . . . . 2-7-4Clear counters. . . . . . . . . 2-7-5GPRS CONNECTION TIMER. . 2-8Duration of last session . 2-8-1Duration of all sessions . 2-8-2Clear timers. . . . . . . . . . . 2-8-3en7210.1ug9354677.book Page 23 Tuesday, August 20, 2002 1:03 PM
[ 24 ]33PROFILESNORMAL. . . . . . . . . . . . . . . . 3-1Select. . . . . . . . . . . . . . . . 3-1-1Customize . . . . . . . . . . . . 3-1-2Ringing options. . . . 3-1-2-1Ringing tone . . . . . . 3-1-2-2Ringing volume . . . . 3-1-2-3Vibrating alert. . . . . 3-1-2-4Message alert tone . 3-1-2-5Keypad tones. . . . . . 3-1-2-6Warning tones. . . . . 3-1-2-7Alert for . . . . . . . . . . 3-1-2-8Timed. . . . . . . . . . . . . . . . 3-1-3SILENT . . . . . . . . . . . . . . . . . 3-2Select. . . . . . . . . . . . . . . . 3-2-1Customize . . . . . . . . . . . . 3-2-2Ringing options. . . . 3-2-2-1Ringing tone . . . . . . 3-2-2-2Ringing volume . . . . 3-2-2-3Vibrating alert. . . . . 3-2-2-4Message alert tone . 3-2-2-5Keypad tones. . . . . . 3-2-2-6Warning tones. . . . . 3-2-2-7Alert for . . . . . . . . . . 3-2-2-8Profile name . . . . . . 3-2-2-9Timed. . . . . . . . . . . . . . . . 3-2-3Submenus for Meeting, Outdoor, and Pager are the same as SilentMEETING. . . . . . . . . . . . . . . . 3-3OUTDOOR . . . . . . . . . . . . . . 3-4PAGER. . . . . . . . . . . . . . . . . . 3-54SETTINGSTIME AND DATE SETTINGS . . 4-1Clock. . . . . . . . . . . . . . . . .4-1-1Date . . . . . . . . . . . . . . . . .4-1-2Auto-update of date & time. . . . . . . . .4-1-3CALL SETTINGS . . . . . . . . . . 4-2Call forwarding . . . . . . . .4-2-1Anykey answer. . . . . . . . .4-2-2Automatic redial . . . . . . .4-2-41-touch dialling. . . . . . . .4-2-4Call waiting . . . . . . . . . . . 4-2-5Summary after call . . . . .4-2-6Send my caller identity. .4-2-7Line for outgoing calls1. .4-2-8PHONE SETTINGS. . . . . . . . . 4-3Language . . . . . . . . . . . . .4-3-1Automatic keyguard . . . .4-3-2Cell info display. . . . . . . .4-3-3Welcome note . . . . . . . . .4-3-4System selection . . . . . . . 4-3-5Confirm SIM service actions. . . . . . . . .4-3-6Help text activation. . . . .4-3-7Start-up tone. . . . . . . . . .4-3-8DISPLAY SETTINGS. . . . . . . . 4-4Wallpaper. . . . . . . . . . . . .4-4-1Color schemes . . . . . . . . .4-4-2Screen saver timeout. . . .4-4-3Operator logo. . . . . . . . . .4-4-4Display brightness . . . . . .4-4-5TONE SETTINGS . . . . . . . . . . 4-5Ringing options . . . . . . . .4-5-1Ringing tone . . . . . . . . . .4-5-2Ringing volume . . . . . . . .4-5-3Vibrating alert . . . . . . . . .4-5-41For availability, contact your wireless provider.en7210.1ug9354677.book Page 24 Tuesday, August 20, 2002 1:03 PM
3[ 25 ]Welcome and quick guideMessage alert tone. . . . . .4-5-5Keypad tones . . . . . . . . . .4-5-6Warning tones . . . . . . . . .4-5-7Alert for. . . . . . . . . . . . . . .4-5-8SECURITY SETTINGS . . . . . . . 4-6PIN code request . . . . . . .4-6-1Call restrictions . . . . . . . .4-6-2Fixed dialing . . . . . . . . . . .4-6-3Closed user group. . . . . . .4-6-4Security level . . . . . . . . . .4-6-5Access codes. . . . . . . . . . .4-6-6RESTORE FACTORY SETTINGS . . . . . . . 4-85ALARM CLOCK6RADIOOPTIONS. . . . . . . . . . . . . . . . 6-17GALLERYVIEW FOLDERS . . . . . . . . . . . 7-1DELETE FOLDER . . . . . . . . . . 7-2RENAME FOLDER . . . . . . . . . 7-3ADD FOLDER. . . . . . . . . . . . . 7-4GALLERY SERVICES. . . . . . . . 7-58ORGANIZERCALENDAR . . . . . . . . . . . . . . 8-1TO-DO LIST. . . . . . . . . . . . . . 8-29GAMESSELECT GAME. . . . . . . . . . . . 9-1GAME SERVICES. . . . . . . . . . 9-2MEMORY . . . . . . . . . . . . . . . 9-3SETTINGS . . . . . . . . . . . . . . . 9-4Game sounds. . . . . . . . . . 9-4-1Game lights. . . . . . . . . . . 9-4-2Shakes . . . . . . . . . . . . . . . 9-4-3Club Nokia ID . . . . . . . . . 9-4-410 APPLICATIONSSELECT APPLICATION. . . . . .10-1APP. SERVICES. . . . . . . . . . .10-2MEMORY. . . . . . . . . . . . . . .10-311EXTRASCALCULATOR. . . . . . . . . . . .11-1COUNTDOWN TIMER . . . . . .11-2STOPWATCH . . . . . . . . . . . .11-312 CONNECTIVITYINFRARED . . . . . . . . . . . . . 12-1GPRS . . . . . . . . . . . . . . . . . 12-2GPRS modem settings . 12-2-1GPRS connection. . . . . . 12-2-213 SERVICESHOME . . . . . . . . . . . . . . . . 13-1BOOKMARKS. . . . . . . . . . . 13-2SERVICE INBOX . . . . . . . . . 13-3SETTINGS. . . . . . . . . . . . . . 13-4Active service settings . 13-4-1Edit active service settings . . . . . . . 13-4-2Appearance settings. . . 13-4-3Cookie settings . . . . . . . 13-4-4Authority certificates . . 13-4-5Service inbox settings. . 13-4-6GO TO ADDRESS . . . . . . . . 13-5CLEAR THE CACHE. . . . . . . 13-6en7210.1ug9354677.book Page 25 Tuesday, August 20, 2002 1:03 PM
[ 26 ]44Basic operations • SET THE CLOCKBefore many functions such as call timers and other features will operate properly, you need to set the clock.1At the Start screen, press Menu 4-1-1 (Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Scroll to Set the time and press Select.3Enter the time (in hh:mm format) and press OK.4Scroll to am or pm and press Select. The time is set. • MAKE AND ANSWER CALLSUse the keypad1Enter the phone number (including the area code), and press t.•To delete a character to the left of the cursor, press Clear.2Press e to end the call or to cancel the call attempt.Use the phone book1At the Start screen, press u or d and scroll to the entry you wish to view.2Press t to make the call or press Details to view details of the entry.Tip: To quickly search the list of entries in your Phone book, press any key in which the letters match the first letter of the name for which you’re searching.en7210.1ug9354677.book Page 26 Tuesday, August 20, 2002 1:03 PM
4[ 27 ]Basic operationsAnswer or reject an incoming call•Press t to answer the call•Press e to reject the call; the caller receives a busy signalIf you press Silence, only the ringing tone is muted. You can then either answer or reject the incoming call.Tip: If the HDB-4 or HDS-3 headset is connected, you can answer or end a call by pressing the key on the headset.Answer a call with the keypad lockedTo answer a call with keyguard on, simply press t. During the call, all features function as normal. When you end or reject the call, the keypad automatically re-locks.Note: When Keyguard is on, calls may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press t. The number is displayed only after you have keyed in its last digit. Redial the last number1At the Start screen, press t to display the last 20 numbers you have dialed. 2Press t to redial the last number, or scroll to the number (or name) you wish to redial and press t.Adjust the earpiece volume•To increase the volume of a call, press the volume up key on the left side of the phone.•To decrease the volume of a call, press the volume down key on the left side of the phone. When adjusting the volume, a bar chart appears in the display indicating the volume level.Volume keyen7210.1ug9354677.book Page 27 Tuesday, August 20, 2002 1:03 PM
[ 28 ]4 • CALL AND SETUP YOUR VOICEMAIL1Once you’ve saved the voice mailbox number, press and hold 1. 2When you connect and the pre-recorded greeting begins, follow the automated instructions to setup your voicemail.Listen to your voice messagesOnce you’ve setup voicemail, you can dial the number one of 3 ways:•Dial the number using the keypad•Press and hold 1•Press Listen if there’s a notification message in the displayWhen you connect and the pre-recorded greeting begins, follow the automated instructions to listen to your voice messages.Make a conference callConference calling is a network service that allows up to six persons to take part in a conference call.1Make a call to the first participant.2To call a new participant, press Options, scroll to New call, and press Select.3Enter the phone number of the new participant (or press Find to retrieve a number from your Phone book) and press Call. The first call is put on hold.4When the new call picks up, press Options, scroll to Conference, and press Select to connect the calls.5To add a new participant to the call, repeat steps 2 through 4.HAVE A PRIVATE CONVERSATION WITH ONE OF THE PARTICIPANTS:6Press Options, select Private and select the desired participant. Rejoin the conference call as described in step 4.7To end the conference call, press e.en7210.1ug9354677.book Page 28 Tuesday, August 20, 2002 1:03 PM
4[ 29 ]Basic operations • OPTIONS DURING A CALLMany of the options that you can use during a call, are network services. Press Options during a call to display those listed in the following table.•Scroll to an option and press Select to activate the option or enter its submenu Option FunctionMute Mute your voice; you can hear the other party but they can’t hear youUnmute Return to normal from mute statusEnd call End the callEnd all calls End all calls within a conference callPhone book Open the Phone book menuMenu Display the main menusHold Place the current call on holdUnhold Remove the current call from hold statusNew call Place a new call; the first call is put on holdConference Call another party and invite them into the callPrivate Have a private conversation with one participant in a conference callAnswer Answer another incoming callReject Reject a call; the calling party receives a busy signalLoudspeaker Enable the handsfree feature in your phoneHandset Disable handsfree and return to normal use (earpiece)Lock keypad Activate keyguardSend DTMF Send touch tones generated by your phones keypadSwap Switch between the active call and the call on holden7210.1ug9354677.book Page 29 Tuesday, August 20, 2002 1:03 PM
[ 30 ]4Press Swap to switch between the active call and the call on hold, Transfer to connect a call on hold, and e to disconnect yourself from all calls. • SET UP YOUR PHONEUse the Optional headsetThe HDB-4 may be purchased with your phone or separately as an accessory. Connect the headset1Plug the headset jack into the Pop-PortTM connector at the bottom end of your phone.2Position the headset on your ear as it appears in the illustration to the right.With the headset connected, you can make, answer, and end calls as usual.•Use the keypad to enter numbers•Press t to place a call•Press e to end a callAdjust display brightness1Press Menu 4-4-5 (Settings - Display settings - Display brightness).After a brief pause, a bar chart appears in the display indicating the current brightness level.2Press l or r to adjust the brightness to your preference.en7210.1ug9354677.book Page 30 Tuesday, August 20, 2002 1:03 PM
4[ 31 ]Basic operationsChange the Xpress onTM coversImportant: Before changing covers, ensure the phone is powered off and disconnected from the charger or any other device. Always store and use the phone with the covers attached.REMOVE THE BACK COVER1Push the back cover release toward the top of the phone.2Lift the back cover away from the phone to remove.REMOVE THE BATTERY3After you’ve removed the back cover, insert your finger into the finger grip and lift the battery from its compartment.REMOVE THE FRONT COVER4Press the front cover latch on the top of the phone while gently pulling the top of the front cover away from the rest of the phone.en7210.1ug9354677.book Page 31 Tuesday, August 20, 2002 1:03 PM
[ 32 ]4INSTALL THE KEYMAT AND NEW FRONT COVER5Remove the key mat from the old front cover and place it into the new front cover as shown.6Insert the latches from the bottom of the new front cover into the matching holes at the bottom of the phone.7Gently push the latches from the middle of the front cover into the matching holes in the middle of the phone.8Gently push the cover latch on the top of the front cover through the locking hole in the top of the phone, and snap the cover into place.9Install the battery, and then match the top of the back cover to the locking catch in the top of the phone. 10 Position the back cover over the locking catches on the both sides of the phone, and press down to lock the cover into place.en7210.1ug9354677.book Page 32 Tuesday, August 20, 2002 1:03 PM
5[ 33 ]Text entry5Text entryYou can use two methods for entering text and numbers.•The standard mode is the only way to enter names into such things as the Phone book, calendar notes, and renaming caller groups•Predictive text input is a quick and easy method for writing messages • STANDARD MODEEnter text (Abc)•Press a key once to insert the first letter on the key, twice for the second letter, and so on. If you pause briefly, the last letter in the display is accepted and your phone awaits the next entry.•Press 0 to enter a space thereby accepting a completed word•Press 1 to enter a period (.)•Press a to display special characters. More about special characters on the following pagesEnter numbers (123)To switch to 123 mode from Abc mode, press and hold # at any message entry screen until the icon in the upper left corner of the display switches from Abc to 123 (or vice versa).CLEAR THE SCREEN•Press Clear to backspace the cursor and delete a character•Press and hold Clear to backspace continuously, and deleteen7210.1ug9354677.book Page 33 Tuesday, August 20, 2002 1:03 PM
[ 34 ]5Enter punctuation and special charactersWhile at any text entry screen, press a to display special characters. The following special characters are availableUse four-way scrollingNavigate special characters using the scroll keys much as you would a joystick. Once a character is highlighted press Insert to insert the character into your message. • PREDICTIVE TEXT INPUTPredictive text input allows you to quickly write messages using your keypad and the phone’s built-in dictionary. You can use predictive text to write messages, create a calendar notes, make a to-do lists, and more.Activate/deactivate predictive text•At a text entry screen, press and hold Options. T9 prediction off or T9 prediction on appears (depending on the prior mode).OR1If predictive text is off, press Options, scroll to Predictive text, and press Select.2Scroll to the language of your choice and press Select.Predictive text is turned on. The predictive text icon () appears in ., ‘ ?!“-()@/:_;+&%*=<>£$¥¤[ ] { } \~^¡¿§#lUpDownLeft Righten7210.1ug9354677.book Page 34 Tuesday, August 20, 2002 1:03 PM
5[ 35 ]Text entrythe upper left corner of the display next.Note: The Language setting in predictive text affects the time and date formats of the Clock, Alarm clock, and Calendar.Write with predictive textFor example, to write Nokia with the English dictionary selected, press each of the following keys only once: (with predictive text on). The illustration below simulates your display each time a key is pressed. 6 6 5 4 2PREDICTIVE TEXT TIPS•Press 0 to enter a space and begin writing the next word•If a displayed word is not correct, press a to see other matches•If ? appears after a word, press Spell to add the word to the dictionary•Press 1 to insert a period into your message•Press and hold Options to turn predictive text on and off•Press and hold a to display special characters. See “Enter punctuation and special characters” and “Use four-way scrolling” on the previous page for the easiest way to enter special charactersNote: Press # to switch predictive text on and off or to cycle through the various modes available. As you press #, the following icons (not descriptions) appear in the display: Uppercase textPredictive text is Off Sentence case textPredictive text is On Lowercase textPredictive text is Off Lowercase textPredictive text is Onen7210.1ug9354677.book Page 35 Tuesday, August 20, 2002 1:03 PM
[ 36 ]5Add new words to the dictionaryIf you encounter a word that predictive text doesn’t recognize, a question mark (?) follows the word and Spell appears in the lower left of the display.•Press Spell, enter your new word using the keypad, and press Save.The word is added to the dictionary as well as the message you’re writing.NOTES ABOUT ADDING WORDS•New words that you accept by pressing Select, 0, or deleting the space between two words are saved to the dictionary.•Depending on the language and the length of the words, you may be able to add hundreds of words to the dictionary.•When the dictionary is full, the most recent addition replaces the first.en7210.1ug9354677.book Page 36 Tuesday, August 20, 2002 1:03 PM
6[ 37 ]Manage phone security6Manage phone securityLock the keypad (Keyguard)Remember to lock your phone’s keypad to prevent accidental calls. If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically reactivates.Important: When Keyguard is on, calls may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press t. The number appears in the display after you’ve keyed in the last digit.•To lock the keypad, press Menu a.Unlock the keypad•At the Start screen, press Unlock a. • SECURITY LEVELSThe security level determines your access to features when a “non-owner” SIM card is used. A “non-owner” SIM card is one (other than the original) that is inserted after you power off the phone. There are 3 security levels:Set your security level1At the Start screen, press Menu 4-6-5 (Settings - Security settings - Security level). Security levelsOff Owner and Non-owner cards are treated the sameMemoryNon-owner cards can access SIM memory. Any changes to the memory setting requires the security code.The owner card has access to all features, but the security code is required to change a memory settingPhone The security code is required upon power-upen7210.1ug9354677.book Page 37 Tuesday, August 20, 2002 1:03 PM
[ 38 ]62After a brief pause, you’re prompted to enter the security code. The default code is 12345. Enter the security code and press OK. 3Scroll to Off, Memory, or Phone and press Select. A message appears in the display confirming your selection • FIXED DIALINGOnce you setup and activate a fixed dialing list, your phone can make calls only to those numbers that you’ve defined in the fixed dialing list. Fixed dialing is a network feature and must be supported by your wireless provider.Note: When fixed dialing is set on, calls may be possible to certain emergency numbers in some networks (such as 911 or other official emergency numbers).Set up and activate a fixed dialing list1At the Start screen, press Menu 4-6-3 (Settings - Security Settings - Fixed dialing). After a brief pause, the options in the following table appear in the display.Note: If you activate fixed dialing and the number list is empty, all outgoing calls, except for emergency numbers such as 911, require entry of the PIN2 code.2Scroll to Number list and press Select. Fixed dialing not active and then Fixed dialing list empty appear in the display.3You’re prompted to enter the PIN2 code. Enter the PIN2 code and press OK.Fixed dialing optionsOn Activate fixed dialing (see note above)Off Deactivate fixed dialingNumber list View the numbers in your fixed dialing listen7210.1ug9354677.book Page 38 Tuesday, August 20, 2002 1:03 PM
6[ 39 ]Manage phone security4Enter the fixed dialing number, or press Find to retrieve a number from your Phone book, and press OK.5Enter a name for the number and press OK. A confirmation note appears in the display and you’re returned to the fixed dialing number list.6Press Back, scroll to On and press Select to activate fixed dialing.View or edit the fixed dialing list1At the Start screen, press Menu 4-6-3 (Settings - Security Settings - Fixed dialing).2Scroll to Number list and press Select.3You’re prompted to enter the PIN2 code. Enter the PIN2 code and press OK.4Any numbers which you’ve assigned to fixed dialing appear in the display.5Scroll to a number and press Options. 6The options in the following table appear in the display.•Use the scroll keys to highlight an option•Press Select to activate or enter an option’s submenuFixed dialing number optionsView number View the number for an entryAdd Add a number to your fixed dialing listEdit Edit the highlighted entryDelete Delete the highlighted entryDelete all Delete all entries in your fixed dialing listen7210.1ug9354677.book Page 39 Tuesday, August 20, 2002 1:03 PM
[ 40 ]6Notes about fixed dialing•If a SIM card with fixed dialing that is activated is inserted into a phone that doesn’t support fixed dialing, the SIM card is rejected•If you try to add a name (without a number) to the fixed dialing list, you’ll receive an error message•If you try to browse the fixed dialing list, but haven’t stored any numbers, Fixed dialing list empty appears in the display•You cannot access SIM memory manually (view or copy numbers on the SIM card) while fixed dialing is active • ACCESS CODESUse access codes to change your security code, PIN code, and PIN2 code.Note: Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.The security codeThe security code controls access to features such as the security level and is supplied with the phone. The preset code is 12345.Note: If you enter the wrong security code five times in succession, you won’t be able to enter a code for five minutes, even if you power off the phone between incorrect entries.CHANGE YOUR SECURITY CODEOnce you change the security code from its preset of 12345, keep the new code secret, and in a safe place separate from your phone.1Press Menu 4-7-4-1 (Settings - Security settings - Access codes - Change security code).After a brief pause, you’re prompted to enter the current security code (default is 12345).2Enter the current security code and press OK. You’re prompted to enter the new security code.3Enter the new security code (up to 10 characters) and press OK. en7210.1ug9354677.book Page 40 Tuesday, August 20, 2002 1:03 PM
6[ 41 ]Manage phone securityYou’re asked to re-enter the new security code for verification.4Enter the new security code again and press OK. A message appears in the display confirming your security code has been changed.The PIN codeThe PIN code protects the SIM card from unauthorized access. The PIN code can be 4- 8 digits in length. After three successive incorrect entries the PIN code is blocked and you’ll be asked to enter the personal unblocking key (PUK) code.Note: The PIN code must be obtained from your wireless provider. The PIN code is typically provided with your SIM card.PIN CODE REQUESTEnable your phone to request the PIN code upon power-up. This provides extra security in case your phone is lost or stolen.1Press Menu 4-6-1 (Settings - Security settings - PIN code request).2After a brief pause, you’re prompted to enter the current PIN code. Enter the PIN code and press OK.3Scroll to On and press OK. A message appears in the display confirming your selection.CHANGE YOUR PIN CODEBefore you can change your PIN code, you’ll need to enable PIN code request. See “PIN code request” immediately preceding this section.1Press Menu 4-7-6-2 (Settings - Security settings - Access codes - Change PIN code).2After a brief pause, you’re prompted to enter the current PIN code. Enter the PIN code and press OK. 3You’re prompted to enter the new PIN code. Enter the new PIN code and press OK.4You’re prompted to re-enter the new PIN code for verification. Enter the new PIN code again and press OK. en7210.1ug9354677.book Page 41 Tuesday, August 20, 2002 1:03 PM
[ 42 ]6A message appears in the display confirming your PIN code has been changed.The PIN2 CodeThe PIN2 code is required for features such as Fixed dialing. If you enter an incorrect PIN2 code three times in succession, the PIN2 code is blocked and you’ll have to enter the PUK2 code.Note: The original PIN2 code must be obtained from your wireless provider.CHANGE YOUR PIN2 CODE1Press Menu 4-7-6-3 (Settings - Security settings - Access codes - Change PIN2 code). You’re prompted to enter the current PIN2 code.2Enter the current PIN2 code and press OK. You’re prompted to enter the new PIN2 code.3Enter the new PIN2 code and press OK. You’re asked to verify the new PIN2 code by entering it again.4Enter the new PIN2 code again and press OK. A message appears in the display confirming you’ve changed the PIN2 code.Personal unblocking key (PUK) codesPUK and PUK2 codes are used to restore blocked PIN and PIN2 codes. Both PUK and PUK2 codes are eight characters in length and cannot be changed. PUK and PUK2 codes must be obtained from your wireless provider.Important: If you enter an incorrect PUK or PUK2 code 10 times in succession, the message SIM rejected appears in the display and the SIM card can no longer be used. You must contact your wireless provider for a new SIM card.Closed user groupsA closed user group is a network service that specifies the group of people whom you can call and who can call you. For more information contact your network operator or service provider.en7210.1ug9354677.book Page 42 Tuesday, August 20, 2002 1:03 PM
7[ 43 ]The Phone book7The Phone bookYour Phone book can save up to 300 names, with multiple numbers and text notes for each name. The amount of numbers and text entries that you can save may vary, depending on their length and the total number of entries in the Phone book. • VIEW THE PHONE BOOK MENU1At the Start screen, press the right selection key (R) under Names. The menu items in the left column of the following table appear in the display.2Scroll to an item. Press Select to activate the feature or enter its submenu.Menu item FunctionFind Find a name or select from a listAdd entry Add a name to your Phone bookEdit name Edit an existing nameDelete Delete a name and its associated numbersCopy Copy entries from Phone memory to SIM and vice versaAdd number Add a number to an existing nameSettings Set memory in use (Phone or SIM), change your Phone book view, and check the memory status of your Phone and SIM card1-touch dialing Display the list of 1-touch dialing numbers saved to memoryen7210.1ug9354677.book Page 43 Tuesday, August 20, 2002 1:03 PM
[ 44 ]7 • SAVE NAMES AND NUMBERSYou can save names and numbers to phone memory or to SIM memory.Quickly save a name and number1At the Start screen, enter the phone number you wish to save.2Press Options, ensure Save is highlighted, and press Select.3Enter a name for the number and press OK. A confirmation message appears in the display indicating your entry has been saved.Quickly save (only) a numberYou can save a phone number as a stand-alone entry in your phonebook.1At the Start screen, enter the number you wish to save.2Press and hold Options. A message appears in the display confirming your number is saved. Save an entry using the Phone book menu1At the Start screen, press Names, scroll to Add entry and press Select.2Enter a name using the keypad and press OK.3Enter a number and press OK.4Press Done to return to the Start screen.Service numbers Display a list of numbers related to your wireless providerOwn numbers View the numbers (line 1, line 2, data) in use by your SIM cardCaller groups View and edit the properties (such as the ring tone) for any of the caller groupsMenu item Functionen7210.1ug9354677.book Page 44 Tuesday, August 20, 2002 1:03 PM
7[ 45 ]The Phone bookSave addresses and notesTo save an email address, you’ll need to add it to an existing entry (name). 1Find the entry (name) in your Phone book to which you’d like to add an address or note.2With the entry highlighted, press Details.3Press Options, scroll to Add detail and press Select.4Scroll to the address or note of your choice and press Select.5Enter the text for the note or address and press OK.Select your Phone book view and memory1Press Names, scroll to Settings, and press Select. 2Scroll to any of the options in the following table. Press Select to enter the option’s submenu.Save multiple numbers and text items per nameYou can save different types of phone numbers and short text items per name to the Phone book. The first number you save for any entry is automatically set as the default, or primary number.Option FunctionMemory in use Select the memory you wish to use. Options are Phone, SIM card, or Phone and SIM combined. With Phone and SIM selected, names and numbers are saved to phone memory but entries saved to both memories appear in the displayPhone book viewSelect the Name list, Name and number, or Name only viewMemory status View the amount of phone or SIM memory used as well as the amount of phone or SIM memory availableen7210.1ug9354677.book Page 45 Tuesday, August 20, 2002 1:03 PM
[ 46 ]71At the Start screen, press u or d and scroll to the entry to which you wish to add a number or text item.2Press Details, and then press Options.3Scroll to Add number or Add detail and press Select.4Scroll to one of the following types and press Select: 5Enter the number or text for the type you’ve selected and press OK.•To change the type, select Change type in the options list.CHANGE THE DEFAULT (PRIMARY) NUMBER1At the Start screen, press u or d, scroll to the entry you wish to change and press Details. 2Scroll to the number you wish to set as default and press Options.3Scroll to As primary no. and press Select.Search for a name in the Phone book1At the Start screen, press u or d to display the contents of your Phone book.2Press the key which corresponds to the first letter of the name for which you are performing a search.3Press u or d to scroll up and down through names in the list. Press l or r to move the cursor left or right in the search window at the bottom of the display, if necessary.4Press Details to view the details of the selected name. General Mobile Home Work Fax E-mail address Web address Street address Noteen7210.1ug9354677.book Page 46 Tuesday, August 20, 2002 1:03 PM
7[ 47 ]The Phone bookEdit a name, number or text item1Search for the entry as described in the previous section and press Details.2Scroll to the name, number or text item you wish to edit and press Options. 3Scroll to Edit name, Edit number, or Edit detail and press Select. 4Edit the name, number, or detail to your preference and press OK.Delete names and numbers1At the Start screen, press Names, scroll to Delete, and press Select.2To delete individual names and numbers, scroll to One by one and press Select. 3Scroll to the entry you wish to delete, press Delete, and press OK to confirm the deletion.4To delete the entire contents of your Phone book, scroll to Delete all, then scroll to the phone book you wish to delete (Phone or SIM card).5Press Delete, then press OK to confirm. You’re asked to enter the security code.6Enter the security code and press OK. • COPY PHONE BOOK ENTRIES1At the Start screen, press Names, scroll to Copy, and press Select.2Scroll to From phone to SIM card or From SIM card to phone and press Select. The following options appear in the display:One by one Select and copy entries one by oneAll Copies all entries from the SIM card or Phone*Primary nos. Copies only primary numbers. This appears only if you select From phone to SIM.en7210.1ug9354677.book Page 47 Tuesday, August 20, 2002 1:03 PM
[ 48 ]73Scroll to the copy method of your choice and press Select. a) If you selected One by one, go to step 4.b) If you selected All or Primary nos., go to step 6.4Scroll to the entry you wish to copy and press Copy.5Scroll to Keep original or Move original and press Select. The entry is copied and you’re returned to the list of Phone book entries.6If you selected All or Primary nos. in step 3, scroll to Keep original or Move original and press Select.7Press OK to confirm your choice. All entries are copied to the selected destination. Press Back to return to the list of Phone book entries, or press e to exit and return to the Start screen.Caution: Select Keep original if you’re unsure of which copy method to use. This ensures original entries are merely copied to the new location. Move original deletes files after copying.Send and receive business cardsYou can send and receive an entry in your Phone book via IR or text message, if supported by your wireless provider.RECEIVE A BUSINESS CARD VIA IR1Press Menu 12-1 (Connectivity - Infrared) to ensure IR is activated.When you receive the business card, your phone beeps and Show appears in the display. 2Select Save to save the business card in the phone’s memory, or press Exit (or OK) to discard the business card.SEND A BUSINESS CARDYou can send a business card via IR or as an text message to a compatible phone or other handheld device.1Highlight an entry from the Phone book that you wish to send and press Details.2Press Options, scroll to Send bus. card and press Select.en7210.1ug9354677.book Page 48 Tuesday, August 20, 2002 1:03 PM
7[ 49 ]The Phone book•To send the business card via IR, make sure the receiving device is set up to receive data via its IR port and select Via infrared.•To send the business card as a message, select Via text message.3If you selected Via infrared (and the entry has multiple sub-entries) scroll to Primary no. or All details and press Select. Your business card is sent.4If you selected Via text message (and the entry has multiple sub-entries), scroll to Primary no. or All details and press Select.5Enter the number for your recipient or press Find to retrieve a number from your Phone book.6Press OK and the business card is sent. • 1-TOUCH DIALINGYou can associate any entry in your Phone book with keys 2 through 9 and then dial those entries by pressing and holding the assigned key.Assign a key to 1-touch dialing1At the Start screen, press Names, scroll to 1-touch dialing and press Select.2Scroll to any empty slot and press Assign.3Enter the number (including the area code) and press OK, or press Find to retrieve a number from your Phone book.4Enter a name for the number and press OK. •If 1-touch dialing is off, the phone displays a prompt asking if you’d like to turn 1-touch dialing on. Press Yes to activate 1-touch dialing. 5The entry appears in the slot you’ve assigned.Make a call with 1-touch dialing•Press and hold the key to which an entry has been assigned. Your phone dials the entry assigned to the key.en7210.1ug9354677.book Page 49 Tuesday, August 20, 2002 1:03 PM
[ 50 ]7CHANGE 1-TOUCH DIALING NUMBERS1At the Start screen, press Names, scroll to 1-touch dialing and press Select.2Scroll to the 1-touch dialing entry you wish to change and press Options.3Scroll to Change and press Select.4Enter the new number, or press Find to retrieve a number from your Phone book, and press OK.5Enter a name for the entry and press OK. DELETE 1-TOUCH DIALING NUMBERS1At the Start screen, press Names, scroll to 1-touch dialing and press Select.2Scroll to the 1-touch dialing location you wish to delete and press Options.3Scroll to delete and press Select. You’re asked to confirm the deletion.4Press OK to delete the key assignment. • VIEW INFO, SERVICE, AND OWN NUMBERSYour wireless provider may have saved your phone’s operating number, as well as various information and service numbers to your SIM card.Note: This feature may not be supported by your SIM card. If so, contact your wireless provider for more information.1Press Names at the Start screen, scroll to one of the number types in the following table, and press Select.Number type Used this number to...Info numbers Contact your wireless provider to obtain informationService numbers Contact your wireless provider to obtain serviceOwn numbers Display the operating number, or numbers which have been assigned to your phone by your wireless provideren7210.1ug9354677.book Page 50 Tuesday, August 20, 2002 1:03 PM
7[ 51 ]The Phone book2To view details of any of the number types in the previous table, press Details when the number type appears in the display.Caller groupsYou can add Phone book entries to any of 5 caller groups, and then assign a unique ringing tone or graphic to that group. This enables you to identify callers from the group by their unique ringing tone or graphic. A caller group can be as small as one person or as large as your entire Phone book. Caller groups can be renamed to suit your preference.CALLER GROUP OPTIONS1At the Start screen, press Names, scroll to Caller groups, and press Select. The following Caller groups are available.2Use the scroll keys (ud) to highlight a group. Press Select to display the following caller group options:Setup a caller group1At the Start screen, press u or d to display a list of entries in your Phone book.Tip: Perform a “quick find” when Phone book entries are displayed by entering the first letter of a name. appears at the bottom of the display to indicate you’re performing a search.2Scroll to a name you’d like to add to a caller group and press Details.3Press Options, scroll to Caller groups, and press Select.4Scroll to the caller group to which you’d like to add the name and press Select. A confirmation message appears in the display.Family VIP Friends Business OtherRename group Rename the group to your preferenceGroup ringing tone Set the ringing tone for the groupGroup logo Turn the graphic for the caller group on or offGroup members Add or remove members from the caller groupen7210.1ug9354677.book Page 51 Tuesday, August 20, 2002 1:03 PM
[ 52 ]88Menu functionsMessages menuIf you’ve subscribed to a message service, you can send and receive messages to compatible phones that are also subscribed to a message service. You can also send and receive picture messages, multimedia messages, and e-mail if supported by your network. Composed messages can be up to 450 characters in length.Linked messagesYour phone can send and receive long messages (up to 450 characters) in sequences. While receiving linked messages, you can start reading the first part before the phone has received the entire message.While viewing the message, you may see *some text missing* on the display. This is normal, and the message content will be updated as soon as the missing sequence arrives.If the memory is full, you may have to delete a message from your inbox or outbox before your phone can update the missing text.Before you can send and receive messagesYou’ll need the following to send and receive messages:•A messaging service through your wireless provider•A message center number, which must be saved to your phone (if your wireless provider hasn’t done so already)Message iconsIcons that precede the title of a message indicate the following:The message has not been readThe message has been readen7210.1ug9354677.book Page 52 Tuesday, August 20, 2002 1:03 PM
8[ 53 ]Menu functionsChoose your message typeYou can choose the type of message sent by your phone. Types include Text and Fax.Note:The default message type is Text.Note: This feature must be supported by your wireless provider.1At the Start screen, press Menu 01-6 (Messages - Message settings).2After a brief pause, Text messages appears highlighted. Press Select.3Sending profile is highlighted. Press Select.4Default profile is highlighted. Press Select. 5Scroll to Messages sent as and press Select.6Scroll to the message type of your choice and press Select. A message appears in the display confirming your selection.Save your message center numberMessages sent by your phone are routed through your wireless provider’s message center. Normally, this number is saved to your phone by your wireless provider. To save the number manually, do the following:1At the Start screen, press Menu 01-6 (Messages - Message settings).2Text messages is highlighted. Press Select.3Sending profile is highlighted. Press Select.4Default profile is highlighted. Press Select.5If the box in the display is empty, enter the number given by your wireless provider and press OK.A message (which you’ve composed) has not been sentiThe message is a delivery reportThe message is a MMS (multimedia message)en7210.1ug9354677.book Page 53 Tuesday, August 20, 2002 1:03 PM
[ 54 ]86If the box is in the display is full, edit the number only if you are sure the number is incorrect, or you’d like to change the number, and press OK. A message appears in the display confirming your number is saved. • TIPS FOR COMPOSING A MESSAGEPredictive text inputPredictive text allows you to write messages using a built-in dictionary. It’s much faster than using the traditional “multi-tap” method. For each letter of the word that you’re spelling, you only need to press the corresponding key on your keypad once. You can use predictive text to write a message, create a calendar note, make a to-do list, and more.Activate/deactivate predictive text•At any text entry screen, press and hold Options. Predictive text is turned on (or off), depending on its previous mode.OR1At a text entry screen, press Options, scroll to Predictive text, and press Select.2Scroll to the language of your choice and press Select.Predictive text is turned on. The predictive text icon () appears in the upper left corner of the display.Note: The Language setting affects the time and date formats of the Clock, Alarm clock, and Calendar.Use predictive textFor example, to write Nokia, with the English dictionary selected, press each of the following keys once: (with predictive text on):6 6 5 4 2en7210.1ug9354677.book Page 54 Tuesday, August 20, 2002 1:03 PM
8[ 55 ]Menu functionsThe illustration above simulates your display each time a key is pressed.•Press 0 to enter a space and begin writing the next word.•If a displayed word is not correct, press a to see other matches. To return to the previous word in the list of matches, press Previous.•If ? appears after a word, press Spell to add the word to the dictionary.•Press 1 to insert a period into your message.•Press and hold a to display special characters. Press a again to cycle through all available characters. See “Use special characters” in the following section for more information on special characters.Note: Press # to switch predictive text on or off and to use predictive text in various modes. As you press #, the following icons (not the descriptions) appear in the upper left of the display:Add new words to the dictionaryIf you encounter a word that predictive text doesn’t recognize, a question mark (?) follows the word and Spell appears in the lower left of the display.•Press Spell, enter your new word using the keypad, and press Save.The word is added to the dictionary as well as the message you’re writing.NOTES ABOUT ADDING WORDS•New words that you accept by pressing Select, 0, or deleting the space between two words are saved to the dictionary.•Depending on the language and the length of the words, you may be able to add hundreds of words to the dictionary. Uppercase textPredictive text is Off Sentence case textPredictive text is On Lowercase textPredictive text is Off Lowercase textPredictive text is Onen7210.1ug9354677.book Page 55 Tuesday, August 20, 2002 1:03 PM
[ 56 ]8•When the dictionary is full, the most recent addition replaces the first.Use special charactersWhile entering text, press and hold a to display the following special characters. Press a again to cycle through all available characters:Use four-way scrollingIn features, such as the calendar monthly view, text messages, and special characters, you can move the cursor up and down as well as left and right. • WRITE AND SEND A TEXT MESSAGE1At the Start screen, press Menu 01-1-1 (Messages - Text messages > Create message).Tip: To go quickly to the Create message display, press l at the Start screen.2After a brief pause, the message entry screen appears in the display.3Compose a message using the keypad and press Options.4Scroll to Send and press Select.., ‘ ?!“-()@/:_;+&%*=<>£$¤[ ] { } \~^¡¿§#Left, press lUp, press uDown, press dRight, press ren7210.1ug9354677.book Page 56 Tuesday, August 20, 2002 1:03 PM
8[ 57 ]Menu functions5Enter the recipient’s phone number, or press Find to retrieve a number from your Phone book, and press OK. Your message is sent.Read messagesWhen you receive a message, your phone beeps and Message received appears in the display as well as the unopened letter icon ( ).1Press Show to read the message, or Exit to move it to your inbox.Note: When you have unopened messages in your inbox, is shown in the upper left corner of the Start screen as a reminder.2Use the scroll keys (u or d) to view the whole message if necessary. Tip: Keep scrolling to view other information, such as the sender number and time the message was sent.3Press Back to move the message to the Inbox, or press Options for other choices, such as Reply or Forward.Read linked messagesYour phone can receive one long message (up to 459 characters) in sequences. You can start reading the first part before the phone has received the entire message.While viewing the message, you may see *some text missing* on the display. This is normal, and the message content will be updated as soon as the missing sequence arrives.If the memory is full, you may have to delete a message from your inbox or outbox before your phone can update the missing text.Reply to a message1While viewing a message, press Options, scroll to Reply, and press Select.2Compose your reply using the keypad, then press Options, scroll to Send, and press Select. 3The number of the original sender appears in the display. Press OK and your reply is sent.en7210.1ug9354677.book Page 57 Tuesday, August 20, 2002 1:03 PM
[ 58 ]8Forward a message1While viewing a message, press Options. 2Scroll to Forward and press Select.3Enter the recipient’s phone number, or press Find to retrieve a number from your Phone book.4Press OK. The message is forwarded. • PICTURE MESSAGESYour phone comes with 10 pre-loaded pictures. You can, however, over-write any of the 10 pictures that come with your phone. Pictures can be attached to a message and sent via text message to compatible phones. Picture messages behave the same as text messages, but pictures take up more space than text. Pictures are stored in the “Templates” folder under Messages - Templates.Note: You cannot send a picture message via e-mail.Download picturesYour phone can download pictures, or receive them from compatible phones via text messaging to use in messages. You can also create pictures and send them to your phone or other compatible phones using Nokia PC Suite.Note: This function can be used only if it is supported by your wireless provider. Only phones that offer picture message features can receive and display picture messages. Contact your wireless provider for details.When you receive a picture messageWhen you receive a picture message, your phone beeps and Message received appears in the display as well the message icon ( ).1Press Show to view the picture message, or press Exit to move it to your inbox.2If you have more than one picture message, scroll to the message of en7210.1ug9354677.book Page 58 Tuesday, August 20, 2002 1:03 PM
8[ 59 ]Menu functionsyour choice and press Select to view the message.Note: When you have unopened picture messages in your inbox, is shown in the upper left corner of the Start screen as a reminder.3Use the scroll keys to view the whole picture if necessary. Tip: Keep scrolling to view other information, such as the sender number and time the message was sent.4Once you’re finished, press Back to move the picture message to the Inbox, or press Options for other choices, such as Reply or Forward.TO SAVE THE PICTUREIf you’d like to save the picture to your Templates folder for later use:1Press Options, scroll to Save picture, and press Select. You can then enter a title for the picture and press OK.Note: If your templates folder is full of pictures, just scroll to the picture you’d like to replace and press Select.Compose and send a picture messageOne picture message is equivalent in size to 3 text messages. When you insert a picture into a message, you’ll have enough remaining space for about 121 characters in the message. If you try and insert a picture into a message that is almost full of text, a beep sounds and you’re prompted to delete some text before proceeding.1At the Start screen, press Menu 01-1-1 (Messages - Text messages - Create message). After a brief pause, the message edit screen appears in the display.2Write a message using the keypad (or enter nothing if you choose to just send a picture), and press Options.Tip: Insert pictures before adding text. You can then check remaining space for text in the upper right corner of the display.3Scroll to Insert picture and press Select. A list of pictures appear in the display.en7210.1ug9354677.book Page 59 Tuesday, August 20, 2002 1:03 PM
[ 60 ]84Scroll to a picture and press View.5Press Insert to insert the picture into your message, otherwise:a) Press Back, scroll to another picture, and press View again.b) Press Insert to insert the picture into your message.6To send the picture message, press Options, scroll to Send, and press Select.7Enter the phone number for your recipient (or press Find to retrieve a number from your Phone book) and press OK. The message is sent.PREVIEW, CHANGE, OR DELETE A PICTURE MESSAGE1After a picture has been inserted into your message, press Options at the message edit screen.2Scroll to one of the following options and press Select.a) Preview - Previews the inserted message before sending. Press Back to return to the list of options.b) Change picture - Takes you back to the picture list.Scroll to highlight a new picture, press View and then press Insert to replace the previous picture in your message.c) Delete picture - Press OK to delete the picture from your message, or press Back to return to the list of options. • E-MAILYou can send e-mail up to 160 characters in length to anyone with an e-mail address. First, you’ll need to setup an e-mail profile and modify a few other settings. It takes just a few minutes, and you only need to do this once.Important: The e-mail address is included in the total character count for an e-mail message, which is 160 characters.Note: You cannot insert pictures with e-mail.en7210.1ug9354677.book Page 60 Tuesday, August 20, 2002 1:03 PM
8[ 61 ]Menu functionsNote: Wireless providers may customize the text message settings interface. For more details about text message services, please contact your wireless provider.Write down the e-mail server numberWrite down your e-mail server number (also known as the “e-mail gateway” number) in the following table. You’ll need this number when setting up an e-mail profile in the next section. You can get this number from your wireless provider.Setup an e-mail profile1At the Start screen, press Menu - 01-6 (Messages - Message settings). After a brief pause, a list of options appear in the display.2Scroll to Text messages, if necessary, and press Select. 3Scroll to Sending profile (if necessary) and press Select. If only one profile is available, go directly to step 5.4Scroll to any empty profile slot and press Select. 5Scroll to Messages sent as and press Select.6Scroll to E-mail and press Select. A confirmation message appears in the display and you’re returned to the previous menu.7Scroll to E-mail server and press Select.8Enter the e-mail server number (sometimes referred to as a “gateway” number). You can obtain this number from your wireless provider.9Scroll to Accept and press Select. A message appears confirming the e-mail server number has been saved. Number Where to find it Write the number belowe-mail server number Your wireless provider 121en7210.1ug9354677.book Page 61 Tuesday, August 20, 2002 1:03 PM
[ 62 ]8Select again.Next, we recommend you rename this sending profile to “e-mail,” which will simplify things later when you’re ready to send e-mail.10 Scroll until Rename sending profile appears in the display and press Select.11Enter a name for the profile (such as e-mail) and press OK.Write and send e-mailNote: See “Tips for composing a message” on page54 for ways to write messages faster.1At the Start screen, press Menu 01-1-2 (Messages - Text messages - Write e-mail).After a brief pause, you’re prompted to enter the e-mail address.2Enter the e-mail address, or press Find to retrieve an e-mail address from your Phone book, and press OK.3Enter a subject for the e-mail and press OK.4Compose your e-mail using the keypad and press Options.Tip: Be sure and leave enough space in the total character count (160) for the e-mail address.5Scroll to Send e-mail (if necessary) and press Select. Your e-mail is sent.If you haven’t saved your e-mail server number, you’re prompted to enter the number. See “Setup an e-mail profile” in the previous section for more information on the e-mail server number.Reply to a message or e-mailWhen you have received a text message or e-mail, , the number of new messages and ___ Message(s) received appears in the display.en7210.1ug9354677.book Page 62 Tuesday, August 20, 2002 1:03 PM
8[ 63 ]Menu functionsNote: The blinking indicates that the message memory is full. Before you can receive new messages, delete some of your old messages. See “Delete messages” on page75 for more information.•Press Show to view the message now, or Exit to view it later.READING THE MESSAGE LATER:1Press Menu, and select Messages, Text messages and Inbox.2If more than one message is received, select the message you want to read and press Select.An unread text message is indicated by in front of the message, and an unviewed picture message by . • MULTIMEDIA MESSAGESA multimedia message (MMS) can contain text, images, and sounds. Your phone has a multimedia message viewer for playing messages and a multimedia inbox for storing saved messages. Once you save the multimedia message, you can use the image as a screen saver or the sound as a ringing tone.Note: This function can be used only if it is supported by your wireless provider. Only compatible devices can receive and display multimedia messages.A multimedia message can contain text, images and sounds. Your phone supports multimedia messages of up to 30 KB. Once you save the multimedia message, you can use the image as a screen saver or the sound as a ringing tone.If the maximum size is exceeded, the phone may not be able to receive the message. Depending upon your network, you may receive a message that includes an Internet address where you can go to view the multimedia message.Pictures included in multimedia messages are scaled down to fit the size of your display.en7210.1ug9354677.book Page 63 Tuesday, August 20, 2002 1:03 PM
[ 64 ]8Note: The default setting of the multimedia message service is on, and your wireless provider may charge for messages received.Multimedia messaging supports the following formats:•Picture: JPEG, GIF, PNG, OTA-BMP and WBMP.•Sound: MIDINote: If a received message contains unsupported elements, they may be replaced with the text Object format not supportedDefine MMS settingsBefore you can use the multimedia message feature, you need to first define the way you want to receive the messages.ALLOW MULTIMEDIA RECEPTIONYou can choose to receive all messages or to receive messages only when you are in the service provider’s home network.1At the Start screen, press Menu 01-6-2-2 (Messages - Message settings - Multimedia msgs. - Allow multimedia reception). After a brief pause, a list of options appear in the display.•Yes to allow all incoming messages•In home system to allow incoming messages only if you are in the service provider’s home system.2After selecting one of the reception options, scroll to Incoming multimedia messages, then press Select.3Scroll to Retrieve, then press Select.BLOCK MULTIMEDIA RECEPTION1At the Start screen, press Menu 01-6-2-2 (Messages - Message settings - Multimedia msgs. - Allow multimedia reception). After a brief pause, a list of options appear in the display.2Scroll to No and press Select. en7210.1ug9354677.book Page 64 Tuesday, August 20, 2002 1:03 PM
8[ 65 ]Menu functionsALLOW OR NOT ALLOW ADVERTISEMENTS1At the Start screen, press Menu 01-6-2-5 (Messages - Message settings - Multimedia msgs. - Allow advertisements). After a brief pause, Yes and No appear in the display.2Scroll to the setting of your choice and press Select.Other MMS settingsOther multimedia settings include saving your messages to the Sent items folder and editing your connection settings.1At the Start screen, press Menu 01-6-2 (Messages - Message settings - Multimedia msgs.). After a brief pause, a list of options appear in the display.2Scroll to an option. Press Select to activate the option or to enter its submenu.Edit multimedia connection settings1At the Start screen, press Menu 01-6-2-4 (Messages - Message settings - Multimedia msgs. - Connection settings).MessageSetting FunctionSave sent messages Saves sent multimedia messages to the Sent items folderAllow multimedia receptionChooses Yes, No, or In home network for your multimedia service. In home network can’t receive multimedia messages outside the home network.Incoming multimedia messagesSelect Retrieve to receive multimedia messages, or Reject if you don’t wish to receive multimedia messages.Connection settings Define WAP settings for retrieving multimedia messages. Activate the set where you want to save the connection settings and then edit the settings.Allow advertisements Allows you to enable or disable reception of automatic multimedia advertisementsen7210.1ug9354677.book Page 65 Tuesday, August 20, 2002 1:03 PM
[ 66 ]82Scroll to Edit active multimedia settings and press Select.3The connection settings in the following table appear in the display. Scroll to a setting. Press Select to enter the setting’s submenu.ABOUT CONNECTION SETTINGSYou may be able to receive multimedia connection settings as a text message from your wireless provider. For more information, contact your wireless provider.SELECT A FONT SIZE FOR YOUR MESSAGES1Press Menu 01-6-3-1 (Messages - Message settings - Other settings - Font size). After a brief pause a list of choices appear in the display.2Scroll to Small font or Large font and press Select. A message Connection setting FunctionSettings’ name Rename the setting to your preferenceHomepage Enter the homepage where your browser retrieves multimedia messagesSession mode Select session modes Temporary or PermanentData bearer Select the data bearerGPRS access point Define the access pointIP address Enter or change the IP addressAuthentication type Select from Normal or SecureUser name Edit or enter your user namePassword Edit or enter a passworden7210.1ug9354677.book Page 66 Tuesday, August 20, 2002 1:03 PM
8[ 67 ]Menu functionsappears in the display confirming your selection.Write and send a multimedia messageFor availability and subscription to the multimedia messaging service, contact your wireless provider.1At the Start screen, press Menu 01-2-1 (Messages - Multimedia messages - Write message). After a brief pause, the message entry screen appears in the display.2Enter the text of your message and press Options.3Scroll to Insert image or Insert sound clip and press Select.4Choose your image or sound clip from the list and press Select.5Scroll to Send to number or Send to e-mail and press Select.Note:If you’ve attached a picture or sound clip to the message, you cannot send the message via e-mail.6Enter the number of the recipient, or the email address and press Select. The message is sent.Read and reply to a multimedia messageWhen a multimedia message is being received, appears (blinking) in the display. Once the message has been fully downloaded, and Multimedia message received appears in the display.1To view the message, press Show. To view the message later, press Exit (and then No when asked to discard).2While viewing the message, press Options. Some or all of the following options may appear in the display. Scroll to an option and press Select to activate the option or enter its submenu.Option FunctionDelete message Delete a saved messageen7210.1ug9354677.book Page 67 Tuesday, August 20, 2002 1:03 PM
[ 68 ]8Note: If blinks and Multimedia memory full, view waiting msg. appears in the display, memory for multimedia messages is full. You need to delete some of your old messages. See “Delete messages” on page75 for more information.ChatYou can have a conversation with another person using this “faster text messaging” application. You can’t save messages, but you can view them while chatting. Chat messages costs about the same as text messages.START A CHAT SESSION1At the Start screen, press Menu 01-3 (Messages - Chat). After a brief pause, you’re prompted to enter the recipient’s phone number.2Enter the recipient’s number or press Find to retrieve a number from the phone book, and press OK.3Enter your Chat name (up to 5 characters) and press OK.Another way to start a chat: When you have received a message, press Show to read it. To start a chat, press Options and select Chat.Reply Reply to the message. Press Options and then Send. The sender’s phone number or e-mail is used as the defaultForward to no. Forward the message to another numberForward to e-mail Forward the message to an e-mail addressEdit Edit the message. You can only edit messages that you’ve writtenDetails View the message subject, size, and classPlay Listen to a sound clip in the message, if one is includedSave tone Save a ringing tone, if included, to the galleryZoom in Enlarge the pictureSave image Save any picture that is attached to your picture galleryOption Functionen7210.1ug9354677.book Page 68 Tuesday, August 20, 2002 1:03 PM
8[ 69 ]Menu functions4Enter your chat message using the keypad. For faster ways to write a message, see “Write with predictive text” on page35.5When you’re ready to send the message, press Options, scroll to Send, and press Select.6When you receive a reply, the message from the other person is shown above your original message.7To reply to the message, press OK and repeat the steps 4 and 5.8To end the chat session, press OK and select Quit.•To view the latest messages of the current chat session, press Options and select Chat history. The message that you have sent are indicated by "<" and your nickname. The messages from your chat partner are indicated by ">" and that sender’s nickname. •Press Back to return to the message you are writing. To edit your nickname, press Options, scroll to Chat name and press Select. • VOICE MESSAGESIf you subscribe to voicemail, your wireless provider will furnish you with a voice mailbox number. You need to save this number to your phone to use voicemail. When you receive a voice message, your phone lets you know by beeping, displaying a message, or both. If you receive more than one message, your phone shows the number of messages received.Save your voice mailbox numberYour wireless provider may have already saved your voice mailbox number to your phone. If so, the number will appear in the display in step 2. Press OK to leave the number unchanged.1At the Start screen, press Menu 01-4-2 (Messages - Voice messages - Voice mailbox number).2After a brief pause, the Voice mailbox number screen appears in the display.3If the box is empty, enter the voice mailbox area code and number.en7210.1ug9354677.book Page 69 Tuesday, August 20, 2002 1:03 PM
[ 70 ]84Press OK. Your phone confirms the number has been saved.Tip: Save yourself the trouble of entering the mailbox codes each time you dial voicemail. See “Automate voicemail” later in this section for more information.Call and setup your voicemail1Once you’ve saved the voice mailbox number, press and hold 1. 2When you connect to voicemail and the pre-recorded greeting begins, follow the service’s automated instructions to setup your voicemail.Listen to your voice messagesOnce you’ve setup voicemail, you can dial the number one of 4 ways:•Dial the number using the keypad•Press and hold 1•Press Listen if there’s a notification message in the display•Press Menu 01-4-1 (Messages - Voice messages - Listen to voice messages). After a brief pause, your phone dials the voicemail number.Once you connect and the pre-recorded greeting begins, follow the automated instructions to listen to your voice messages. • AUTOMATE VOICEMAILYou can insert special characters called “dialing codes” into phone numbers such as voicemail and then save the number to a 1-touch dialing location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string.Note: Each voicemail service can vary. The examples and steps that follow are for clarification. Check with your wireless provider if you have specific questions about your voicemail service.Write down some information1Write down your voice mailbox number.en7210.1ug9354677.book Page 70 Tuesday, August 20, 2002 1:03 PM
8[ 71 ]Menu functions2Call and check your voicemail as you normally would.3Write down your interaction with the recorded prompts step-by-step. Keep in mind that each voicemail service may vary. However, it should look something like this:Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press pound key.Important: Be precise, you’ll need this information in “Setup voicemail with dialing codes” on page71.LEARN HOW TO INSERT DIALING CODESPress a repeatedly to cycle through dialing codes. Once the desired code appears in the display, pause briefly and the code is inserted into the dialing string.For example, press a four times to display the “w” (wait character). Pause briefly and the wait character is inserted into the dialing string. Available dialing codes are as follows:Setup voicemail with dialing codes1At the Start screen, press Names, scroll to 1-touch dialing, and press Select.2Scroll to an empty 1-touch dialing slot and press Assign.3Enter your voice mailbox number, including the area code.4Refer to the table entitled “dialing codes,” and enter any codes as necessary using the information that you wrote down earlier.Dialing codes*Bypasses a set of instructions+Precedes an international telephone numberpPauses for 2.5 seconds before sending any numbers that followwWait. Your phone waits for you to press t before it sends any numbers or codes that follow.en7210.1ug9354677.book Page 71 Tuesday, August 20, 2002 1:03 PM
[ 72 ]8For example, if you pause for 5 seconds after connecting to voicemail, enter p twice after the voice mailbox number, such as 2145551212pp.5Enter any remaining pauses, PIN codes, and other information that allows you to listen to your messages, then press OK.6Enter a name (such as Voicemail) and press OK. A message appears in the display confirming your 1-touch dialing location has been saved.Now, to dial and listen to your voicemail, just press and hold the assigned 1-touch dialing key at the Start screen. No other keypresses should be necessary to connect and listen to your messages. • MESSAGE OPTIONSSome or all of the options in the following table are available for text messages, picture messages, multimedia messages, and e-mail.1While viewing a text, picture, multimedia message, or e-mail press Options.2Scroll to highlight an option. Press Select to activate the option or enter its submenu.Option FunctionDelete Delete the message you’re viewingReply Reply to the message; you’ve the option to include the Original text in the reply, a template, or empty screenUse detail Extract numbers, e-mail addresses and website addresses from the current messageForward Forward the message to another recipientEdit Edit the messageMove Move the message to a folder you specifyen7210.1ug9354677.book Page 72 Tuesday, August 20, 2002 1:03 PM
8[ 73 ]Menu functions • ORGANIZE MESSAGES WITH FOLDERSSave messages to foldersYou can save messages to an existing folder or to a folder that you’ve created.1Press Menu 01-1-1 (Messages - Text message - Create message). After a brief pause, the message entry screen appears in the display.2Write your message and press Options.3Scroll to Save message and press Select.4Scroll to the Archive, Templates, or My folders (if you’ve created a folder of your own) and press Select. The message is saved.View saved messages1At the Start screen, press Menu 01-1 (Messages - Text messages).2After a brief pause, scroll to the folder containing the message you wish to view and press Select.3Once the folder opens, scroll to the message you wish to view and press Select.Inbox folderMessages are automatically stored in the inbox after they’ve been read or if you press Back when Message received appears on the Start screen.Rename Rename the message before it’s saved to a folderCopy to Calendar Copy text from the beginning of the message to your phone’s calendar as a reminder note for the current day.Message details View the sender’s name and phone number, the message center used, reception date and time.Option Functionen7210.1ug9354677.book Page 73 Tuesday, August 20, 2002 1:03 PM
[ 74 ]8Archive folderStore messages that have been read in the Archive folder.Templates folderPictures and pre-written templates are stored in the Templates folder. Pre-loaded templates can be edited/customized.My foldersKeep your messages organized by creating custom folders and saving some of your messages there.ADD A FOLDER OF YOUR OWN1At the Start screen, press Menu 01-1-7 (Messages - Text messages - My folders). After a brief pause, the folder opens. 2Press Options. Scroll to Add folder and press Select.3Enter a name for the new folder and press OK. The folder is added.REMOVE A FOLDEROnly folders created in My folders can be deleted. The Inbox, Outbox, Archive, and Template folders are protected. When you delete a folder, all messages in the folder are also deleted.1At the Start screen, press Menu 01-1-7 (Messages - Text messages - My folders). After a brief pause, the folder opens.2Any folders that you’ve created appear in the display. Scroll to the folder you wish to remove and press Options. 3Scroll to Delete folder and press Select. You’re asked to confirm the deletion.4Press OK to delete or Back to exit.Move a message to a folder1While viewing the message, press Options.2Scroll to Move and press Select.3Scroll to the destination folder and press Select. en7210.1ug9354677.book Page 74 Tuesday, August 20, 2002 1:03 PM
8[ 75 ]Menu functions • DELETE MESSAGESIf your message memory is full and you have more messages waiting at the network, blinks in on Start screen. You can do the following to create more space:•Read some of the unread messages and then delete them•Delete messages from some of your foldersDelete a single messageTo delete a single message, you need to open it first.1Press Menu 01-1 (Messages - Text messages). After a brief pause, a list of options appear in the display.2Scroll to the folder containing the message you wish to delete and press Select. A list of messages, if you have any, appears in the display.3Scroll to the message you wish to delete and press Select. The message opens.4Press Options, scroll to Delete, and press Select.5You’re asked to confirm the erasure. Press OK to delete the message or Back to exit.Delete all messages in a folder1At the Start screen, press Menu 01-1-8 (Messages - Text messages - Delete messages). After a brief pause, a list of your folders appears in the display.2Scroll to the folder containing the messages you wish to delete and press Select. You’re asked to confirm your erasure.Important: If you select All read, it deletes any messages which have been read in all of the folders.3Press OK to empty the folder.en7210.1ug9354677.book Page 75 Tuesday, August 20, 2002 1:03 PM
[ 76 ]8Change text, e-mail and picture message settings1At the Start screen, press Menu 01-6-1-1 (Messages - Message Settings - Text messages - Sending profile).2If more than one message profile set is supported by your SIM card, scroll to the set you wish to change and press Select. MessageSetting FunctionMessage center numberSave the phone number of the message center, which is necessary for sending text messages; obtain this number is from your wireless providerDefault recipient numberFor text messages, the default number used to send messagesUse GPRS Set GPRS as the preferred method of sending text messagesReply via same center Allow the recipient of your message to send you a reply message via your message center (network service).Messages sent as Select the message type Text, E-mail, Page, or FaxMessage validity Define how long the network attempts to send your messages before it gives upE-mail server number For e-mail messages, the default number used to send e-mailDelivery reports Request the network to send delivery reports on your messagesRename sending profileChange the name of the selected sending profile; the sending profile sets display only if your SIM card supports more than one seten7210.1ug9354677.book Page 76 Tuesday, August 20, 2002 1:03 PM
8[ 77 ]Menu functionsOVERWRITE SETTINGS FOR TEXT, E-MAIL, AND PICTURE MESSAGESWhen the message memory is full, your phone can’t send or receive any new messages. However, you can set your phone to automatically replace old messages in the Inbox and Outbox folders when new ones arrive.1Press Menu, 01-6-1 (Messages - Message settings - Text messages). After a brief pause, a list of options appear in the display.2Scroll to Overwriting in sent items or Overwriting in inbox and press Select. 3Scroll to Allowed and press Select to replace the old messages with new ones in the Sent items or Inbox folder, respectively.Change multimedia message settings1At the Start screen, press Menu 01-6-2 (Messages - Message settings - Multimedia msgs.). After a brief pause, a list of options appear in the display.2Scroll to an option. Press Select to activate the option or to enter its submenu.Message setting FunctionSave sent messages Saves sent multimedia messages to the Sent items folderAllow multimedia receptionChooses Yes, No, or In home network for your multimedia service. In home network can’t receive multimedia messages outside the home networkIncoming multimedia messagesSelect Retrieve to receive multimedia messages, or Reject if you don’t wish to receive multimedia messagesAllow advertisement Allows you to enable or disable reception of automatic multimedia advertisementsen7210.1ug9354677.book Page 77 Tuesday, August 20, 2002 1:03 PM
[ 78 ]8RECEIVE MULTIMEDIA CONNECTION SETTINGS AS A TEXT MESSAGEYou may be able to receive multimedia connection settings as a text message from your wireless provider. For more information, contact your wireless provider.SELECT A FONT SIZE1Press Menu 01-6-3-1 (Messages - Message settings - Other settings - Font size). After a brief pause, a list of choices appear in the display.2Scroll to Small font or Large font and press Select. A message appears in the display confirming your selection.Use the info message serviceWith the info message network service, you can receive short text messages on various topics, such as weather and traffic conditions, from your wireless provider. 1At the Start screen, press Menu 01-5 (Messages - Info messages). After a brief pause, the list of options in the following table appear in the display.2Scroll to an option. Press Select to activate the option or to enter its submenu.Message setting FunctionInfo service Select On or Off to activate or deactivate the serviceTopics Options for selecting, adding, editing, and deleting info topicsLanguage Select the language in which info messages are received. The language you select does not affect the language you select under the Phone settings menuInfo topics saved on SIM cardSelect one or more info topics to save to your SIM carden7210.1ug9354677.book Page 78 Tuesday, August 20, 2002 1:03 PM
8[ 79 ]Menu functionsNote:For more information on topics, contact your wireless provider.Use service commandsUse the Service commands editor to enter and send service requests (also known as USSD commands) to your wireless provider. Contact your wireless provider for information about specific service commands.1At the Start screen, press Menu 01-7 (Messages - Service commands).2Enter a service request, such as an activation command for a specific network service, and press Send.en7210.1ug9354677.book Page 79 Tuesday, August 20, 2002 1:03 PM
[ 80 ]8Call log (Menu 2) Call log stores information about the last 10 missed, 10 received, or 20 dialed calls. It also adds the total duration of all calls. When the number of calls exceed the maximum, the most recent call replaces the oldest. For Call log to work properly:•Your wireless provider must support caller ID, and it must be enabled•Your calls can’t be blocked•Your phone must be on and within the service area • CALL LOG OPTIONSWhether you are viewing missed, received, or dialed calls, each of the menu options will be the same. Please refer to the following table regarding menu options for these features.Missed, received, and dialed call optionsCall time Display the date and time of the callSend message Send a message to the numberView number Display the numberEdit number Edit the number and associate a name with the numberSave Enter a name for the number and save it to your Phone bookAdd to name Add the number to an existing entry in your Phone book, if the number is not associated with a nameDelete Clear the number from memoryCall Call the numberen7210.1ug9354677.book Page 80 Tuesday, August 20, 2002 1:03 PM
8[ 81 ]Menu functions • VIEW MISSED CALLSMissed calls are calls that were never answered. You can check for missed calls two ways:1If # missed call appears in the display, press List. The phone number appears in the display.2Press Options to display the options listed in the table on page80.3Scroll to an option, press Select to activate the option or to enter its submenu.OR1At the Start screen, press Menu 2-1 (Call log - Missed calls).After a brief pause, a list of missed calls appear in the display (if any exist).2Scroll to a name or number and press Options to display the options listed in the table on page80.3Scroll to an option, press Select to activate the option or to enter its submenu. • VIEW RECEIVED CALLSReceived calls are calls that have been answered.1At the Start screen, press Menu 2-2 (Call log - Received calls).After a brief pause, a list of received calls appears in the display (if any exist).2Scroll to a name or number and press Options to display the options listed in the table on page80.3Scroll to an option, press Select to activate the option or enter its submenu. • VIEW DIALED NUMBERSYou can view dialed numbers one of two ways:en7210.1ug9354677.book Page 81 Tuesday, August 20, 2002 1:03 PM
[ 82 ]81At the Start screen, press t. Your most recently dialed numbers appear in the display.OR2At the Start screen, press Menu 2-3 (Call log - Dialed numbers). After a brief pause, your most recently dialed numbers appear in the display.3Scroll to a name or number and press Options to display the options listed in the table on page80.4Scroll to an option, press Select to activate the option or enter its submenu.Call timesYou can receive up to five calls from the same number, and view the time each call occurred. Your clock must be set for this feature to work accurately. See “Set the clock” on page26 for instructions on setting your clock.1While viewing a missed or received call, press Options, scroll to Call time, and press Select.2The time that the last call occurred appears in the display. 3Press d to view other call times from this number. Press Back to return to the options list. • CLEAR CALL LISTSTo clear any missed, dialed, or received calls from your phone’s memory:1At the Start screen, press Menu 2-4 (Call log - Delete recent call lists).After a brief pause, All, Missed, Received and Dialed appear in the display.2Scroll to the call type you’d like to clear and press Select.en7210.1ug9354677.book Page 82 Tuesday, August 20, 2002 1:03 PM
8[ 83 ]Menu functions • VIEW CALL DURATION1Duration of last call. At the Start screen, press Menu 2-5-1 (Call log - Call timers - Duration of last call). The duration of your last call appears in the display.2Duration of dialed calls. At the Start screen, press Menu 2-5-2 (Call log - Call timers - Duration of dialed calls). The duration of all dialed calls appears in the display.3Duration of received calls. At the Start screen, press Menu 2-5-3 (Call log - Call timers - Duration of received calls). The duration of all received calls appears in the display.4Duration of all calls. At the Start screen, press Menu 2-5-4 (Call log - Call timers - Duration of all calls). The duration of all calls (missed, dialed, and received) appears in the display.en7210.1ug9354677.book Page 83 Tuesday, August 20, 2002 1:03 PM
[ 84 ]8Profiles (Menu 3)Profiles define how your phone reacts when you receive a call or a message, how your keypad sounds when you press a key, and more. Ringing options, keypad tones, and other settings for each of the 5 available profiles can be left at their default setting, or customized to suit your needs. Select and customize the most suitable profile for your situation, such as when you are in a meeting or outdoors. The following profiles are available:Note: Profiles are also available for accessories such as a headset and car kit. See “Accessory settings” on page98 for more information about accessory profiles. • SELECT A PROFILE1At the Start screen, press Menu 3 (Profiles).After a brief pause, the list of profiles appear in the display.2Scroll through the available profiles and press Select once the profile of your choice is highlighted. 3Scroll to Select and press Select. • CUSTOMIZE A PROFILEYou can customize any of the profiles a variety of ways.1At the Start screen, press Menu 3 (Profiles).After a brief pause, the list of profiles appears in the display.2Scroll to the profile you wish to customize and press Select.3Scroll to Customize and press Select.•Normal •Silent •Meeting •Outdoor •Pageren7210.1ug9354677.book Page 84 Tuesday, August 20, 2002 1:03 PM
8[ 85 ]Menu functions4Use the scroll keys to display each of the options in the following table. Once you arrive at the option you’d like to customize, press Select.Note: You cannot rename the Normal profile. • SET A TIMED PROFILETimed profiles can be used to prevent missed calls. For example, suppose you attend an event that requires your phone be set to Silent before the event starts, but you forget to return it to Normal until long after the event. During this time, you’ve missed several calls because the ringing tone was silent. A timed profile can prevent this by automatically returning your phone to the default profile at a time you specify.Note: Timed profiles can be set up to 24 hours in advance.Custom profile optionsRinging options Select the ringing tone styleRinging tone Select the ringing tone for incoming callsRinging volume Set the volume of your ringing toneVibrating alert Turn the vibrating alert on or offMessage alert tone Select the tone for received messagesKeypad tones Set the volume of your keypad tones (or turn them off)Warning tones Turn warning and confirmation tones on or offAlert for Define which caller groups the selected profile will accept or decline. See “Caller groups” on page51 for more information.Profile name Rename the profile (up to 16 characters)en7210.1ug9354677.book Page 85 Tuesday, August 20, 2002 1:03 PM
[ 86 ]81At the Start screen, press Menu 3 (Profiles).After a brief pause, the list of profiles appears in the display.2Scroll to the profile you wish to activate and set for timed expiration, then press Select.3Scroll to Timed and press Select.4Enter the time for the profile to expire and press OK. The profile you’ve set for expiration is now active and appears in the Start screen along with a small “clock” icon en7210.1ug9354677.book Page 86 Tuesday, August 20, 2002 1:03 PM
8[ 87 ]Menu functionsSettings (Menu 4)Set the clock1At the Start screen, press Menu 4-1-1 (Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Scroll to Set the time and press Select.3Enter the time (in hh:mm format) and press OK.4Scroll to am or pm and press Select. The time is set.Show/hide the clockYou have the option of displaying (or not displaying) the clock on the Start screen.1At the Start screen, press Menu 4-1-1 (Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Press Select.•If your clock was previously “hidden,” (not shown on the display), it will now appear in the upper right corner of the Start screen.•If your clock was previously shown in the display, it will now be hidden from view.Change the time formatYou can set the time format for am/pm or 24 hour format (military time).1At the Start screen, press Menu 4-1-1 (Settings - Time and date settings - Clock). en7210.1ug9354677.book Page 87 Tuesday, August 20, 2002 1:03 PM
[ 88 ]8After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Scroll to Time format and press Select.3Scroll to 24-hour or am/pm and press Select. A message appears in the display confirming your selection.Set the date1At the Start screen, press Menu 4-1-2 (Settings - Time and date settings - Date). After a brief pause, a list of options appear in the display.2Scroll to Set the date and press Select.3Enter the date and press OK. The date is set.Set or change the date format1At the Start screen, press Menu 4-1-2 (Settings - Time and date settings - Date). 2Scroll to Date format and press Select. 3Scroll to the format of your choice and press Select.4Scroll to the date separator of your choice (period, slash, hyphen, or space) and press Select. A message appears in the display confirming your selection. • CALL SETTINGSCall forwardingCall forwarding tells your network to redirect incoming calls to another number.Note: Call forwarding is network-dependent and may not work the same in all networks. Contact your wireless provider for availability.en7210.1ug9354677.book Page 88 Tuesday, August 20, 2002 1:03 PM
8[ 89 ]Menu functionsACTIVATE CALL FORWARDINGNote: This is a network dependent feature. All options listed in the following table may not appear in the display. Contact your wireless provider for more information.1At the Start screen, press Menu 4-2-1 (Settings - Call settings - Call forwarding).2After a brief pause, the forwarding options listed in the following table appear in the display.3Scroll to the option of your choice and press Select.4Scroll to Activate and press Select.5Scroll to the destination to which your calls will be forwarded (such as To other no.) and press Select.6Enter the number to which your calls, data, or other information will be forwarded and press OK.Forward all voice calls Forward all calls to the number you specifyForward if busy Forward incoming calls when you’re in a callForward if not answered Forward incoming calls to another number if you’re unable to answer. You can also set a delay before forwarding takes placeForward if out of reach Forward incoming calls when your phone is offForward when not able to take calls Forward calls that aren’t picked up. You can also set a delay before forwarding takes placeForward all fax calls Forward all fax calls to a fax mailboxForward all data calls Forward all data calls to a data mailboxCancel all call forwarding Cancel any call forwarding options you may have seten7210.1ug9354677.book Page 89 Tuesday, August 20, 2002 1:03 PM
[ 90 ]8Your phone calls the network to activate the feature you’ve requested. The network sends a confirmation note when the feature has been activated successfully.CANCEL CALL FORWARDING•At the Start screen, press Menu 4-2-1-8 (Settings - Call settings - Call forwarding - Cancel all call forwarding).Note:Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your wireless provider for specific details.Anykey answerAnykey answer allows you to answer an incoming call by briefly pressing any key except the power key, L, R, and e.1At the Start screen, press Menu 4-2-2 (Settings - Call settings - Anykey answer). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select.Automatic redialOccasionally, your network may experience heavy traffic, resulting in a “fast” busy signal when you dial. With automatic redial activated, your phone redials the number up to 10 times, and notifies you once the network becomes available.ACTIVATE OR DEACTIVATE AUTOMATIC REDIAL1At the Start screen, press Menu 4-2-3 (Settings - Call settings - Automatic redial). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select.1-touch dialingYou can assign any entry in your Phone book to keys 2 through 9, and then dial those entries by pressing and holding the assigned key.ASSIGN A KEY TO 1-TOUCH DIALING1At the Start screen, press Names, scroll to 1-touch dialing and press Select.en7210.1ug9354677.book Page 90 Tuesday, August 20, 2002 1:03 PM

Navigation menu