Microsoft NHL-4J GSM PCS 1900 Cellular Telephone User Manual en7250ug

Microsoft Mobile Oy GSM PCS 1900 Cellular Telephone en7250ug

UserManual.wiki >

Microsoft >

NHL 4J User Manual

Users Manual

Nokia 7250i User Guide 1 Copyright © Nokia 2003Nokia 7250i User GuideD R A F T

2 Copyright © Nokia 2003Phone notesMy Nokia 7250i information Information sourceMy number Wireless providerVoicemail number Wireless providerWireless providercustomer careWireless providerMessage center number Wireless providerDefault recipient number(e-mail gateway number) Wireless providerInternational Mobile Equipment Identifier (IMEI)On back of your phone, beneath the batteryModel number 7250iPhone type NHL-4J

Nokia 7250i User Guide 3 Copyright © Nokia 2003The wireless phone described in this guide is approved for use in GSM 900, 1800, and 1900 networks.LEGAL INFORMATIONPart No. 9355971, Issue No. 1 DRAFT No. 4Copyright ©2003 Nokia. All rights reserved.Nokia, Nokia 7250i, Xpress-on Color Covers, Pop-Port, Nokia Connecting People, and the Nokia Original Accessories logos are trademarks or registered trademarks of Nokia Corporation.Printed in Canada 9/2002US Patent No 5818437 and other pending patents. T9 text input software Copyright ©1999-2002. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java is a trademark of Sun Microsystems, Inc.The information contained in this user guide was written for Nokia model 7250i phone. Nokia operates a policy of on-going development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior noticeUNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLSThis product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited.FCC/INDUSTRY CANADA NOTICEYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be

4 Copyright © Nokia 2003eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Nokia 7250i User Guide 7 Copyright © Nokia 2003Call settings 112Phone settings 115Display settings 119Tone settings 121Enhancement settings 121Security settings 122Restore factory settings 122Turn the radio on and off 123Use the radio 123Save a radio channel 124Camera settings 126Take a photo 127Open the Gallery 128View folders 129Alarm clock 130Calendar 131Make a to-do list 136Launch a game 139Games 140Launch an application 141Application options 142Download applications 142Converter II 143Calculator 145countdown timer 147stopwatch 148Wallet 151Synchronize 156Use the voice recorder 160Use voice commands 162Infrared 166GPRS, HSCSD, CSD 167Nokia PC Suite 169Download PC Suite software 170Notes on wireless Internet access 171

8 Copyright © Nokia 2003Set up for browsing 172Sign on to the wireless Internet 172Use browser options 173Navigate the wireless Internet 173Use bookmarks 176Enhancements 179About enhancements 179Power 180Audio 182Data 184Car 185Covers and Carrying 186Reference information 187Batteries and chargers 187Important safety information 189Care and maintenance 195Frequently Asked Questions 196Glossary 200Technical information 202Nokia One-Year Limited Warranty 203

[ 9 ]For your safety1 For your safetyRead these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual.Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTDon't use a hand-held phone while driving.INTERFERENCEAll wireless phones may get interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any regulations or rules. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTWireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELINGDon't use the phone at a refuelling point. Don't use near fuel or chemicals.SWITCH OFF NEAR BLASTINGDon't use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.USE SENSIBLYUse only in the normal position. Don't touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair phone equipment.

[ 10 ]OBSERVE INFRARED PRECAUTIONSDo not point the IR beam at anyone’s eyes or allow it to interfere with other IR devices.ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatible products.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user's guide for detailed safety instructions. Do not connect incompatible products. BACKUP COPIESRemember to make backup copies of all important data.WATER-RESISTANCEYour phone is not water-resistant. Keep it dry.CALLINGEnsure the phone is switched on and in service. Enter the phone number, including the area code, then press the Talk key. To end a call, press the End key. To answer a call, press the Talk key.EMERGENCY CALLSEnsure the phone is switched on and in service. Press the End key as many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Enter the emergency number, then press the Talk key. Give your location. Do not end the call until told to do so.

[ 11 ]Overview of functions2 Overview of functions Certain features use shared memory. Please see “Shared memory” on page 24 for more information. • CAMERAYour phone has a built-in camera that can be used for taking pictures. After you have taken a picture, you can attach it to a multimedia message and send it with the Multimedia Messaging Service (MMS). And, you can use a picture as wallpaper in standby mode. And, you can save your pictures in a compatible PC using Nokia PC Suite software. See “Camera (Menu 7)” on page 126 for more information. • FM STEREO RADIOYour phone has an integrated FM stereo radio. You can listen to the radio through a headset or the handsfree speaker (with the headset attached). See “Radio (Menu 6)” on page 123 for more information. • MULTIMEDIA MESSAGING SERVICE (MMS)Your phone is able to send and receive multimedia messages made up of text and pictures, and to receive messages containing text, a picture, and sound such as polyphonic ringing tones. You can save pictures and ringing tones to personalize your phone. In addition, you can easily send text messages and multimedia messages to multiple recipients! See “Multimedia Messages” on page 71 and see “Message options” on page 65. • SPEAKERPHONEYou can use your phone as a speakerphone during a call. See “Use the loudspeaker” on page 46.

[ 12 ] • GENERAL PACKET RADIO SERVICE (GPRS)GPRS technology allows mobile phones to send and receive data over a mobile network. Applications such as web browsers, MMS, text messaging, and JavaTM use GPRS. Your phone supports up to three simultaneous GPRS connections. For more information on GPRS, see “GPRS, HSCSD, CSD” on page 167. Also, consult the PC Connectivity Guide. The PC Connectivity Guide, Nokia PC Suite, and all related software can be downloaded from the U.S. Mobile Phone products section of www.nokia.com.Before you can use GPRS technology• Contact your network operator or service provider for availability and subscription to the GPRS service.• Save the GPRS settings for each of the applications used over GPRS.PRICING FOR GPRS AND APPLICATIONSYour wireless provider may charge for GPRS services. For more information on pricing, contact your wireless provider. • OVER THE AIR (OTA) SETTINGS SERVICETo use web browsers, MMS, GPRS, and other wireless services, you must have the proper settings on your phone. If you receive the settings directly as an OTA message, then you need only to save the settings on your phone. For more information about the availability of the settings, contact your service provider or nearest authorized Nokia dealer. • IMPROVED WEB BROWSERThe built-in web browser on your phone can display both WAP-based and xHTML-based content. For more information, please see “Services (Menu 14)” on page 171.

[ 13 ]Overview of functions • MIDP JAVATM APPLICATIONSYour phone supports JavaTM and includes some Java applications and games that have been specially designed for mobile phones. You may be able to download new applications and games to your phone from a PC with Java installer software or from some Mobile Internet services. See “Applications (Menu 11)” on page 141 for more information. • POLYPHONIC SOUND (MIDI)Polyphonic sounds are used in ringing tones, gaming sounds, and message alert tones. They consist of several sound components played at the same time, like an actual melody through a speaker. Your phone has sound components from over 40 instruments that can be used for polyphonic sounds and the phone can play four instruments simultaneously. The phone supports Scalable Polyphonic MIDI (SP-MIDI) format.You can receive polyphonic ringing tones via multimedia service, (see “Read and reply to a multimedia message” on page 76), or download them via the gallery menu, see “Gallery (Menu 8)” on page 128 for more information. • SPECIAL MENU FEATURES• Full-color animated images introduce every menu on your phone. • With the My Menu feature, you can create a convenient Go to menu available through the Right selection key that lists the functions that you use most often. For more informatio about My Menu, please see “Right selection key settings” on page 109.• Quick keys from the Start screen take you instantly to frequently-accessed functions. Please see “Quick keys” on page 28.

[ 15 ]Welcome and quick guide • NOKIA 7250I PHONE AT A GLANCEPower keyEarpieceVolume keysDisplay screenEnd keyScroll up keyRightselection keyScroll down keyNumber keysTalk keyLeft selection keyPound keyStar key+-MicrophoneConnection portsIR PortCamera (back)

[ 16 ] • GET THE MOST OUT OF THIS GUIDEThe “Nokia 7250i phone at a glance” diagram illustrates the various components of your phone. Familiarize yourself with the diagram to help you better understand the instructions that follow. Understand the termsThis guide uses certain terms for the steps that you are asked to perform. •Press means to press and release a key quickly. For example, Press 7 means press the key on the keypad that is labeled with the number 7 and the letters “p, q, r, s”.•Press and hold means to press and hold a key for two to three seconds (depending on the feature you are using), then release the key.•Highlighted options on the screen are enclosed within a dark bar. The selection keys are used to act on the highlighted option.•Selection keys are used to select a menu option. To select an option, press the selection key below the menu item on the phone’s screen. In the example to the right, to select Details you would press the left selection key. To Exit the phonebook, press the right selection key.•Scroll keys are used to move up and down in the menus. With some features, such as the calendar monthly view, text messages, and special characters, you can move the screen cursor up and down as well as left and right. For example, if instructed to scroll to another phonebook entry, this means press the Scroll up key or the Scroll down key. •Talk and End keys: Press the Talk key to place a call or to answer an incoming call. Press the End key to end a call or press and hold to return to the idle screen.Scroll upScrollleftScrollrightScrolldown

[ 17 ]Welcome and quick guideObserve text cluesThis user guide provides text clues to make instructions easy to follow.Follow graphic cluesThis guide uses graphic clues (icons) to alert you to important information.Tip: Provides a shortcut or an alternate method to do something.Note: Explains a feature or points out an important concept.Important: Explains information critical to use a feature correctly.Caution! Helps you to avoid information loss.Warning! Helps you avoid personal injury, damage to the phone, or property damage.Text clue What it meansbold Indicates one of the following items:• A word or phrase on the phone’s screen.• Special text such as Notes and Warnings.bold and blue Indicates the text is an address on the World Wide Web.italic Indicates emphasis. Pay close attention to any information in italics.

[ 18 ]Quick guide to functionsMake a call Enter a phone number, press the Talk key.Answer a call Press the Talk key or select Answer.Answer a call while already on another call (call waiting)Press the Talk key.End a call Press the End key.Decline a call Press the End key. This sends the call directly to voice mail.Mute a call Select Mute during a call.Redial Press the Talk key twice.Adjust call volume Press the Volume keys during a call.Use in-call menu Select Options while in a call.Save a name and numberEnter a number, press Save, then enter a name and press OK.Use 1-touch dialing Press and hold key 2 through 8. You must first assign a number in the phonebook to a key.Look up a name or numberSelect Names then select Search.Check voice mail Press and hold the 1 key OR call your voice mailbox number (contact your service provider for complete details).Send text messagesPress Menu 01-1. Select Write new. Add the recipient’s phone number and press OK. Press Options again and scroll to Edit message. Write the message. Press Options, scroll to Send, press Select. Note: Messaging services are dependent on your service provider.Read new message If “New Message” appears on the display, select Read, then select Read again when the message is highlighted.Reply to a message After reading the message, select Options, select Reply, write the reply, select Options, select Send.

[ 19 ]Welcome and quick guideConnection ports and other tools• Charger connector (1)• Pop-PortTM connector for headsets and data cables (2)• Infrared (IR) port (3)• Camera lens on the back cover of the phone (4)Use the antennaYour phone has a built-in antenna. As with any other radio transmitting device, avoid touching the antenna while the phone is powered up.Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than necessary. Hold the phone as you would any other telephone with the antenna area pointed up and over your shoulder.

[ 20 ]Use the batteryCHARGE THE BATTERY1Plug the charger transformer in to a standard AC outlet.2Insert the charger output jack into the round connector at the bottom end of the phone.After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely flat, it may take a few minutes before the charging indicator appears on the display or any calls can be made.Tip: You can use the phone while the charger is connected.REMOVE THE BACK COVER1With the back of the phone facing you, push the back cover release button.2Lift the bottom of the back cover to remove.REMOVE THE BATTERY3After you have removed the back cover, insert your finger into the finger grip and lift the battery from its compartment.Install the SIM cardWarning: Keep all SIM cards out of reach of small children.• The SIM card and its contacts can easily be damaged by scratches or bending, so be careful when handling, inserting or removing the card.

[ 21 ]Welcome and quick guide• Before installing the SIM card, always make sure that the phone is switched off and that you have removed the cover and battery.1Slide the SIM card holder toward the bottom end of the phone until it unlocks.2Swing the SIM card holder open.3Insert the SIM card into the holder, (beveled corner last) and the gold contacts facing toward the top end of the phone.4Close the SIM card holder.5Slide the SIM card holder toward the top end of the phone until it locks into place.

[ 22 ]REPLACE THE BATTERYThe SIM card must be installed before installing the battery.1Position the battery so the gold contacts match up with those on the phone. The battery label should be facing away from the phone.2Insert the battery, contact end first into the battery slot.3Snap the other end of the battery into place.REPLACE THE BACK COVER1Place the top of the back cover to the locking catch in the top of the phone. 2Position the back cover over the locking catches on the both sides of the phone and press down to lock the cover into place.

[ 23 ]Welcome and quick guideConnect and wear the stereo headsetAfter you connect the stereo headset (HDS-3) to the Pop-Port connector of your phone, you can wear the headset as shown in the picture..Thread a wrist strapThread a strap as shown in the picture, and then tighten it.

[ 24 ]Shared memoryThe following features in your phone use shared memory: Phone book, text and multimedia messages, images and ringing tones in gallery, calendar and to-do notes, Wallet notes, and JavaTM games and applications. Using any of these features leaves less memory for other features. This is especially true with heavy use of any of the features. For example, saving many images may take all of the shared memory and your phone may display that the memory is full. In this case, delete some of the information or entries reserving the shared memory.The following functions share dynamic memory that is dependent on the data quantity per item and shared memory available at a time in the Nokia 7250i.• Phone book (up to 500 entries)• Phone book images (up to 100 average size 2 kB images)• Camera images (up to 25 average size 27 kB images)• SMS (up to 150 text messages or 50 picture/concatenated messages)• MMS (up to 30 max size 30 kB MMS messages)• Ringing tones (31 preset, 20 removable, up to 60 average size 5 kB ringing tones)• Images (10 preset, up to 50 average size 10 kB images)• Calendar notes (up to 500 entries)• To-do list (up to 30 entries)•JavaTM applications (3 preset, up to 15 max size 64 kB per app)Static memoryThe following features in your phone use static memory:• Browser cache (up to 20 entries)• Browser bookmarks (up to 30 entries)• Browser security cache and certificates (up to 20 entries)

[ 25 ]Welcome and quick guide •GET HELPFind your phone’s labelIf you need help, Nokia Customer Care is available for assistance. Before calling, however, please read “Frequently Asked Questions” on page 196.We also recommend that you write down the following information and have it available if you call. The information can be found on back of the phone, beneath the battery.• The International Mobile Equipment Identifier (IMEI)• We also ask that you write down your zip code.Contact NokiaPlease have your phone or enhancement with you when contacting either of the numbers below.Nokia Customer Care Center, USA Customer Interaction Center, CanadaNokia, Inc.7725 Woodland Center Boulevard Suite #150Tampa, Florida 33614Tel: 1-888-NOKIA2U (1-888-665-4228)Fax: 1-813-249-9619TTY: 1-800-24NOKIA (hearing impaired only) (1-800-246-6542)Nokia Products Ltd.601 Westney Road SouthAjax, Ontario L1S 4N7Tel: 1-888-22NOKIA (1-888-226-6542)Fax: 1-905-427-1070Information label

[ 27 ]Welcome and quick guide • SWITCH YOUR PHONE ON OR OFFWarning:Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.1To turn your phone on or off, press and hold the power key on top of the phone for at least 3 seconds.If the phone displays Insert SIM card even though the SIM card is properly inserted, or SIM card not supported, contact your wireless provider.2Enter the PIN code if necessary and press OK.3Enter the security code if necessary and press OK.Note: If the language that appears in your display is not correct, see “Set the display language” on page 115 for information on changing your phone’s display language.

[ 28 ] • CHECK THE START SCREENThe Start screen is “home base” and indicates your phone is in idle mode.Quick keysFrom the Start screen, each scroll key takes you instantly to frequently-accessed menus. Item DescriptionHOME The name of your wireless provider may appear hereSignal strength A higher bar indicates a stronger network signal.Battery level A higher bar indicates more power in the battery.Menu Press the Left selection key to select this option.Names Press the Right selection key to select this option.Key FunctionScroll up Turn on the cameraScroll left Create a message.Scroll down Go to the phone bookScroll right View the calendarBattery levelNamesSignal strengthMenu

[ 32 ]3Scroll to On or Off and press Select. A confirmation message appears in the display indicating your selection. • MENU SHORTCUTSTo access a menu quickly, press “Menu,” then enter the shortcut. For example, to view calls that you missed, select Menu, press the 2 key, then press the 1 key (menu 2-1 is the Call log - Missed calls menu).1 MESSAGESTEXT MESSAGES. . . . . . . . 01-1Create message. . . . . . . 01-1-1Inbox . . . . . . . . . . . . . . . 01-1-2Create e-mail . . . . . . . . 01-1-3Sent items . . . . . . . . . . . 01-1-4Archive. . . . . . . . . . . . . . 01-1-5Templates . . . . . . . . . . . 01-1-6My folders . . . . . . . . . . . 01-1-7Delete messages . . . . . . 01-1-8MULTIMEDIA MSGS . . . . . . 01-2Create message. . . . . . . 01-2-1Inbox . . . . . . . . . . . . . . . 01-2-2Outbox. . . . . . . . . . . . . . 01-2-3Sent items . . . . . . . . . . . 01-2-4Saved items. . . . . . . . . . 01-2-5Delete messages . . . . . . 01-2-6CHAT. . . . . . . . . . . . . . . . . . 01-3VOICE MESSAGES . . . . . . . . 01-4Listen to voice messages . . . . . . . 01-4-1Voice mailbox number . 01-4-2INFO MESSAGES. . . . . . . . . 01-5Info service . . . . . . . . . . 01-5-1Topics. . . . . . . . . . . . . . . 01-5-2Language . . . . . . . . . . . . 01-5-3Info topics saved on SIM card . . . . 01-5-4MESSAGE SETTINGS . . . . . . 01-6Text messages . . . . . . . . 01-6-1

[ 34 ]Data sent in last session 2-7-1Data received in last session . . . . . . . . . 2-7-2All sent data . . . . . . . . . . 2-7-3All received data . . . . . . . 2-7-4Clear counters. . . . . . . . . 2-7-5GPRS CONNECTION TIMER . . 2-8Duration of last session . 2-8-1Duration of all sessions . 2-8-2Clear timers. . . . . . . . . . . 2-8-33 PHONE BOOKFIND . . . . . . . . . . . . . . . . . . . 3-1ADD ENTRY . . . . . . . . . . . . . . 3-2DELETE . . . . . . . . . . . . . . . . . 3-3One by one . . . . . . . . . . . 3-3-1Delete all . . . . . . . . . . . . . 3-3-2COPY. . . . . . . . . . . . . . . . . . . 3-4From phone to SIM card 3-4-1From SIM card to phone 3-4-2SETTINGS . . . . . . . . . . . . . . . 3-5Memory in use . . . . . . . . 3-5-1Phone book view. . . . . . . 3-5-2Memory status . . . . . . . . 3-5-31-TOUCH DIALING . . . . . . . . 3-6SERVICE NUMBERS . . . . . . . . 3-7OWN NUMBERS . . . . . . . . . . 3-8CALLER GROUPS . . . . . . . . . . 3-9Family . . . . . . . . . . . . . . . 3-9-1VIP . . . . . . . . . . . . . . . . . . 3-9-2Friends . . . . . . . . . . . . . . . 3-9-3Business. . . . . . . . . . . . . . 3-9-4Other . . . . . . . . . . . . . . . . 3-9-54PROFILESNORMAL. . . . . . . . . . . . . . . . 4-1Select. . . . . . . . . . . . . . . . 4-1-1Customize . . . . . . . . . . . . 4-1-2Ringing options . . . . 4-1-2-1

[ 35 ]Welcome and quick guideRinging tone . . . . . . .4-1-2-2Ringing volume. . . . .4-1-2-3Vibrating alert. . . . . .4-1-2-4Message alert tone. .4-1-2-5Keypad tones. . . . . . .4-1-2-6Warning tones . . . . .4-1-2-7Alert for. . . . . . . . . . .4-1-2-8Timed. . . . . . . . . . . . . . . . .4-1-3SILENT . . . . . . . . . . . . . . . . . 4-2Select . . . . . . . . . . . . . . . .4-2-1Customize . . . . . . . . . . . . .4-2-2Ringing options. . . . .4-2-2-1Ringing tone . . . . . . .4-2-2-2Ringing volume. . . . .4-2-2-3Vibrating alert. . . . . .4-2-2-4Message alert tone. .4-2-2-5Keypad tones. . . . . . .4-2-2-6Warning tones . . . . .4-2-2-7Alert for. . . . . . . . . . .4-2-2-8Profile name . . . . . . .4-2-2-9Timed. . . . . . . . . . . . . . . . .4-2-3Submenus for Meeting, Outdoor, and Pager are the same as SilentMEETING . . . . . . . . . . . . . . . 4-3OUTDOOR . . . . . . . . . . . . . . 4-4PAGER. . . . . . . . . . . . . . . . . . 4-55 SETTINGSRIGHT SELECTION KEY . . . . . 5-1Select options. . . . . . . . . .5-1-1Organize . . . . . . . . . . . . . .5-1-2TIME AND DATE . . . . . . . . . . 5-2Clock . . . . . . . . . . . . . . . . .5-2-1Date. . . . . . . . . . . . . . . . . .5-2-2Auto-update of date and time. . . . . . . .5-2-3CALL SETTINGS . . . . . . . . . . . 5-3Call forwarding. . . . . . . . .5-3-1

[ 37 ]Welcome and quick guideCall restrictions . . . . . . . .5-8-2Fixed dialing . . . . . . . . . . .5-8-3Closed user group. . . . . . .5-8-4Security level . . . . . . . . . .5-8-5Access codes. . . . . . . . . . .5-8-6RESTORE FACTORY SETTINGS . . . . . . . 5-96RADIOOPTIONS . . . . . . . . . . . . . . . . 6-1Turn off . . . . . . . . . . . . . . .6-1-1Save channel . . . . . . . . . .6-1-2Automatic tuning. . . . . . .6-1-3Manual tuning . . . . . . . . .6-1-4Set frequency . . . . . . . . . .6-1-5Delete channel . . . . . . . . .6-1-6Loudspeaker . . . . . . . . . . .6-1-7Mono output . . . . . . . . . .6-1-87CAMERASTANDARD PHOTO . . . . . . . . 7-1PORTRAIT PHOTO . . . . . . . . . 7-2SELF-TIMER . . . . . . . . . . . . . 7-3Standard photo. . . . . . . . .7-3-1Portrait photo . . . . . . . . . .7-3-2SETTINGS . . . . . . . . . . . . . . . 7-4Image quality . . . . . . . . . .7-4-1High . . . . . . . . . . . . . .7-4-1-1Normal. . . . . . . . . . . .7-4-1-2Basic . . . . . . . . . . . . .7-4-1-3Camera sounds. . . . . . . . .7-4-2Default title . . . . . . . . . . .7-4-3Automatic . . . . . . . . .7-4-3-1My title . . . . . . . . . . .7-4-3-28 GALLERYOPTIONS . . . . . . . . . . . . . . . . 8-1

[ 38 ]Open. . . . . . . . . . . . . . . . . 8-1-1Details . . . . . . . . . . . . . . . 8-1-2Name . . . . . . . . . . . . 8-1-2-1Size. . . . . . . . . . . . . . 8-1-2-2Date . . . . . . . . . . . . . 8-1-2-3Time . . . . . . . . . . . . . 8-1-2-4Sort . . . . . . . . . . . . . . . . . 8-1-3By name. . . . . . . . . . 8-1-3-1By date. . . . . . . . . . . 8-1-3-2By format. . . . . . . . . 8-1-3-3By size . . . . . . . . . . . 8-1-3-4Add folder . . . . . . . . . . . . 8-1-4Gallery downloads . . . . . 8-1-5Image downloads . . . . . . . . . Tone downloads. . . . . . . . . . . 9 ORGANIZERALARM CLOCK . . . . . . . . . . . 9-1CALENDAR . . . . . . . . . . . . . . 9-2View Day . . . . . . . . . . . . . 9-2-1Make a note . . . . . . . . . . 9-2-2Go to date . . . . . . . . . . . . 9-2-3Settings . . . . . . . . . . . . . . 9-2-4Set the date. . . . . . . 9-2-4-1Set the time. . . . . . . 9-2-4-2Date format . . . . . . . 9-2-4-3Date separator. . . . . 9-2-4-4Time format . . . . . . . 9-2-4-5Week starts . . . . . . . 9-2-4-6Auto-delete . . . . . . . 9-2-4-7Go to to-do list . . . . . . . . 9-2-5TO-DO LIST . . . . . . . . . . . . . . 9-310 GAMESSELECT GAME . . . . . . . . . . . 10-1Bounce. . . . . . . . . . . . . . 10-1-1Triple Pop. . . . . . . . . . . . 10-1-2GAME DOWNLOADS . . . . . . 10-2

[ 39 ]Welcome and quick guideClub Nokia . . . . . . . . . . .10-2-1Software Market . . . . . .10-2-2More bookmarks. . . . . . .10-2-3MEMORY . . . . . . . . . . . . . . 10-3SETTINGS . . . . . . . . . . . . . . 10-4Game sounds . . . . . . . . .10-4-1Game lights . . . . . . . . . .10-4-2Shakes. . . . . . . . . . . . . . .10-4-311 APPLICATIONSSELECT APPLICATION . . . . . 11-1Converter . . . . . . . . . . . .11-1-1Open . . . . . . . . . . . .11-1-1-1Delete . . . . . . . . . . .11-1-1-2Web access . . . . . . .11-1-1-3Check version . . . . .11-1-1-4Details . . . . . . . . . . .11-1-1-5APP. DOWNLOADS . . . . . . . 11-2Club Nokia . . . . . . . . . . .11-2-1Software Market . . . . . .11-2-2More bookmarks. . . . . . .11-2-3MEMORY . . . . . . . . . . . . . . 11-312 EXTRASCALCULATOR . . . . . . . . . . . 12-1Exchange rate. . . . . . . . 12-1-1Foreign unitsin home units . . . . 12-1-1-1Home unitsin foreign units . . . 12-1-1-2COUNTDOWN TIMER . . . . . 12-2STOPWATCH . . . . . . . . . . . . 12-3Split timing. . . . . . . . . . 12-3-1Lap timing. . . . . . . . . . . 12-3-2WALLET . . . . . . . . . . . . . . . 12-4Cards . . . . . . . . . . . . . . . 12-4-1Personal notes . . . . . . . 12-4-2Settings. . . . . . . . . . . . . 12-4-3

[ 40 ]Code request . . . . . 12-4-3-1Charge code. . . . . . 12-4-3-2SYNCHRONIZE . . . . . . . . . . 12-5Synchronize. . . . . . . . . . 12-5-1Settings . . . . . . . . . . . . . 12-5-2Active . . . . . . . . . . . 12-5-2-1Custom. . . . . . . . . . 12-5-2-2VOICE RECORDER . . . . . . . . 12-6VOICE COMMANDS. . . . . . . 12-713 CONNECTIVITYINFRARED . . . . . . . . . . . . . . 13-1GPRS. . . . . . . . . . . . . . . . . . 13-2GPRS modem settings . 13-2-2GPRS connection . . . . . 13-2-1When needed. . . . . 13-2-1-1Always online . . . . 13-2-1-214 SERVICESHOME . . . . . . . . . . . . . . . . . 14-1BOOKMARKS . . . . . . . . . . . 14-2SERVICE INBOX. . . . . . . . . . 14-3SETTINGS . . . . . . . . . . . . . . 14-4Active service settings . 14-4-1Edit active service settings . . . . . . . 14-4-2Settings’ name. . . . 14-4-2-1Homepage . . . . . . . 14-4-2-2Session mode. . . . . 14-4-2-3Connection security14-4-2-4Data bearer . . . . . . 14-4-2-5GPRS access point. 14-4-2-6IP address. . . . . . . . 14-4-2-7Authentication type14-4-2-8Login type . . . . . . . 14-4-2-9User name . . . . . . 14-4-2-10Password . . . . . . . 14-4-2-11

[ 41 ]Welcome and quick guideAppearance settings. . . 14-4-3Text wrapping . . . . 14-4-3-1Show images. . . . . 14-4-3-2Cookie settings. . . . . . . 14-4-4Certificates . . . . . . . . . . 14-4-5Security module settings14-4-6Service inbox settings . 14-4-7GO TO ADDRESS . . . . . . . . . 14-5CLEAR THE CACHE . . . . . . . 14-6

[ 42 ]4 Basic operations • SET THE CLOCKBefore many functions such as call timers and other features will operate properly, you need to set the clock.1At the Start screen, press Menu 5-2-1 (Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Scroll to Set the time and press Select.3Enter the time (in hh:mm format) and press OK.4Scroll to am or pm and press Select. The time is set. • MAKE AND ANSWER CALLSNote: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Use the keypad1Enter the phone number (including the area code), and press the Talk key.• To delete a character to the left of the cursor, press Clear.2Press the End key to end the call or to cancel the call attempt.Make an international callTo make an international call, press the Star key twice for the international prefix. A plus (+) sign replaces the international access code. Then, key in the country code, the area code without a leading zero (if necessary), and the phone number.

[ 43 ]Basic operationsUse the phone book1At the Start screen, press the Scroll up key or the Scroll down key and scroll to the entry you wish to view.2Press the Talk key to make the call or press Details to view details of the entry.Tip: To search the list of entries in your Phone book quickly, press any key in which the letters match the first letter of the name for which you are searching.Answer or reject an incoming call• Press the Talk key to answer the call• Press the End key to reject the call; the call is diverted to your voicemailIf you press Silence, only the ringing tone is muted. You can then either answer or reject the incoming call.Tip: If the HDB-4 or HDS-3 headset is connected, you can answer or end a call by pressing the key on the headset.Answer a call with the keypad lockedTo answer a call with keyguard on, simply press the Talk key. During the call, all features function as normal. When you end or reject the call, the keypad automatically re-locks.Note: When Keyguard is on, calls may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press the Talk key. The number is displayed only after you have keyed in its last digit. Redial the last number1At the Start screen, press the Talk key to display the last 20 numbers you have dialed. 2Press the Talk key to redial the last number, or scroll to the number (or name) you wish to redial and press the Talk key.

[ 44 ]Adjust the earpiece volume• To increase the volume of a call, press the volume up key on the left side of the phone.• To decrease the volume of a call, press the volume down key on the left side of the phone. • When adjusting the volume, a bar chart appears in the display indicating the volume level. • CALL AND SETUP YOUR VOICEMAIL1Once you have saved the voice mailbox number, press and hold the 1 key. 2When you connect and the pre-recorded greeting begins, follow the automated instructions to setup your voicemail.Listen to your voice messagesOnce you have setup voicemail, you can dial the number one of 3 ways:• Dial the number using the keypad• Press and hold the 1 key• Press Listen if there’s a notification message in the displayWhen you connect and the pre-recorded greeting begins, follow the automated instructions to listen to your voice messages. • OPTIONS DURING A CALLMany of the options that you can use during a call, are network services. Press Options during a call to display those listed in the following table.

[ 45 ]Basic operationsScroll to an option and press Select to activate the option or enter its submenu. Press Swap to switch between the active call and the call on hold, Transfer to connect a call on hold, and the End key to disconnect yourself from all calls.Option FunctionMute Mute your voice; you can hear the other party but they cannot hear youUnmute Return to normal from mute statusEnd call End the callEnd all calls End all calls within a conference callPhone book Open the Phone book menuMenu Display the main menusHold Place the current call on holdUnhold Remove the current call from hold statusNew call Place a new call; the first call is put on holdConference Call another party and invite them into the callPrivate Have a private conversation with one participant in a conference callAnswer Answer another incoming callReject Reject a call; the calling party receives a busy signalLoudspeaker Enable the handsfree feature in your phoneHandset Disable handsfree and return to normal use (earpiece)Touch tones Send touch tones generated by your phones keypadSwap Switch between the active call and the call on hold

[ 46 ]Make a conference callConference calling is a network service that allows up to six persons to take part in a conference call.1Make a call to the first participant.2To call a new participant, press Options, scroll to New call, and press Select.3Enter the phone number of the new participant (or press Find to retrieve a number from your Phone book) and press Call. The first call is put on hold.4When the new call picks up, press Options, scroll to Conference, and press Select to connect the calls.5To add a new participant to the call, repeat steps 2 through 4.HAVE A PRIVATE CONVERSATION WITH ONE PARTICIPANT6Press Options, select Private and select the desired participant. Rejoin the conference call as described in step 4.7To end the conference call, press the End key.Use the loudspeakerYou can use your phone as a loudspeaker during a call. Do not hold the phone to your ear during the loudspeaker operation.• To activate the loudspeaker, press Options and select Loudspeaker.• To deactivate the loudspeaker during a call, press Options and select Handset.• The loudspeaker is deactivated automatically when a call (or a call attempt) ends or when certain enhancements are connected. • SET UP YOUR PHONEUse the optional boom headsetThe HDB-4 may be purchased with your phone or separately as an enhancement.

[ 47 ]Basic operationsConnect the headset1Plug the headset jack into the Pop-PortTM connector at the bottom end of your phone.2Position the headset on your ear as it appears in the illustration to the right.With the headset connected, you can make, answer, and end calls as usual.• Use the keypad to enter numbers• Press the Talk key to place a call• Press the End key to end a callAdjust display brightness1Press Menu 4-4-5 (Settings - Display settings - Display brightness).After a brief pause, a bar chart appears in the display indicating the current brightness level.2Press the Left selection key or the Right selection key to adjust the brightness to your preference.Change the Xpress-onTM coversImportant: Before changing covers, ensure the phone is powered off and disconnected from the charger or any other device. Always store and use the phone with the covers attached.REMOVE THE BACK COVER AND THE BATTERYThis procedure is illustrated in the section “Use the battery” on page 20.1Push the back cover release toward the top of the phone.2Lift the back cover away from the phone to remove.

[ 48 ]3After you have removed the back cover, insert your finger into the finger grip and lift the battery from its compartment.REMOVE THE FRONT COVER4Press the front cover latch on the top of the phone while gently pulling the top of the front cover away from the rest of the phone. INSTALL THE KEYMAT AND NEW FRONT COVER5Remove the key mat from the old front cover and place it into the new front cover as shown.6Insert the latches from the bottom of the new front cover into the matching holes at the bottom of the phone.7Gently push the latches from the middle of the front cover into the matching holes in the middle of the phone.8Gently push the cover latch on the top of the front cover through the locking hole in the top of the phone, and snap the cover into place.

[ 49 ]Basic operations9Install the battery, and then match the top of the back cover to the locking catch in the top of the phone. 10 Position the back cover over the locking catches on both sides of the phone, and press down to lock the cover into place.

[ 50 ]5 Text entryYou can use two methods for entering text and numbers.•Standard mode is the only way to enter names into such things as the Phone book, calendar notes, and to rename caller groups•Predictive text input is a quick and easy method for writing messages • STANDARD MODEEnter text (Abc)• Press a key once to insert the first letter on the key, twice for the second letter, and so on. If you pause briefly, the last letter in the display is accepted and your phone awaits the next entry.• Press the 0 key to enter a space thereby accepting a completed word• Press the 1 key to enter a period (.)• Press the Star key to display special characters. See more about special characters on the following pagesEnter numbers (123)To switch to 123 mode from Abc mode, press and hold the Pound key at any message entry screen until the icon in the upper left corner of the display switches from Abc to 123 (or vice versa).CLEAR THE SCREEN• Press Clear to backspace the cursor and delete a character• Press and hold Clear to backspace continuously and delete

$[ 51 ]Text entryEnter punctuation and special charactersWhile at any text entry screen, press the Star key to display special characters (press and hold the Star key if predictive text is on). The following special characters are available:Use four-way scrollingYou can navigate through a list of special characters by using the four-way scroll keys like a joystick. Once a character is highlighted, press Insert to insert the character into your message. Please see “Understand the terms” on page 16. • PREDICTIVE TEXT INPUTPredictive text input allows you to write messages quickly using your keypad and the phone’s built-in dictionary. It is much faster than using the traditional “multi-tap” method. For each letter of the word that you are spelling, you only need to press the corresponding key on your keypad once. You can use predictive text to write a message, create a calendar note, make a to-do list, and more.Activate/deactivate predictive text• At any text entry screen, press and hold Options. Predictive text is turned on and off, depending on its previous mode.OR1At a text entry screen, press Options, scroll to Predictive text, and press Select..,‘?!“-()@/:_ ; +&%*=<>£$¥¤[]{}\~^¡¿ §# l$

[ 52 ]2Scroll to the language of your choice and press Select.Predictive text is turned on. The predictive text icon ( ) appears in the upper left corner of the display.Note: The Language setting affects the time and date formats of the Clock, Alarm clock, and Calendar.Use predictive textFor example, to write Nokia with predictive text on and with the English dictionary selected, press each of the following keys once: the 6 key the 6 key the 5 key the 4 key the 2 keyThe illustration above simulates your display each time a key is pressed.• Press the 0 key to enter a space and begin writing the next word.• If a displayed word is not correct, press the Star key to see other matches. To return to the previous word in the list of matches, press Previous.•If ? appears after a word, press Spell to add the word to the dictionary.• Press the 1 key to insert a period into your message.• Press and hold the Star key to display special characters. Press the Star key again to cycle through all available characters. See “Use four-way scrolling” in the following section for more information on special characters.

[ 53 ]Text entryNote: Press the Pound key to switch predictive text on or off and to use predictive text in various modes. As you press the Pound key, the following icons (not the descriptions) appear in the upper left of the display:Add new words to the dictionaryIf you encounter a word that predictive text does not recognize, a question mark (?) follows the word and Spell appears in the lower left of the display.• Press Spell, enter your new word using the keypad, and press Save.The word is added to the dictionary as well as the message you are writing.NOTES ABOUT ADDING WORDS• New words that you accept by pressing Select, the 0 key, or deleting the space between two words are saved to the dictionary.• Depending on the language and the length of the words, you may be able to add hundreds of words to the dictionary.• When the dictionary is full, the most recent addition replaces the first. Uppercase textPredictive text is Off Sentence case textPredictive text is On Lowercase textPredictive text is Off Lowercase textPredictive text is On

[ 54 ]6 Phone securityWith keyguard, you can lock the keypad to prevent keys from being pressed accidentally. And with access codes, you can keep your private information safe. • KEYGUARDRemember to lock your phone’s keypad to prevent accidental calls.If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically reactivates.Lock the keypad1Select Menu with the Right selection key.2Press the Star key.Unlock the keypad1Select Unlock with the Right selection key.2Press the Star key.Important: When Keyguard is on, calls may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press the Talk key. The number appears in the display after you have keyed in the last digit.

[ 55 ]Phone security • SECURITY LEVELSThe security level determines your access to features when a “non-owner” SIM card is used. A “non-owner” SIM card is one (other than the original) that is inserted after you power off the phone. There are 3 security levels:Set your security level1At the Start screen, press Menu 5-8-5 (Settings - Security settings - Security level). 2After a brief pause, you are prompted to enter the security code. The default code is 12345. Enter the security code and press OK. 3Scroll to Off, Memory, or Phone and press Select. A message appears in the display confirming your selection • RESTRICT CALLSThis network service lets you restrict the calls your phone can make and receive. Check with your service provider for details.Note: When calls are restricted, calls may be possible to certain emergency numbers in some networks (such as 911 or other official emergency number).Turn on call restrictions1Press Menu 5-8-2 (Settings > Security settings > Call restrictions).Security levelsOff Owner and Non-owner cards are treated the sameMemoryNon-owner cards can access SIM memory. Any changes to the memory setting requires the security code.The owner card has access to all features, but the security code is required to change a memory settingPhone The security code is required upon power-up

[ 56 ]2Scroll through the types of calls you can restrict, and press Select when you see the one you want.Outgoing calls: Calls cannot be made.International calls: Calls cannot be made to foreign countries.International except to home country: When abroad, calls can be made only within the current country and to your home country (that is, the country where your home network operator is located).Incoming calls: Calls cannot be received.Incoming calls if roaming: Calls cannot be received outside your home area.Cancel all call restrictions: Turns off all call restrictions. Calls can be made and received in the usual way.Note: If you selected Cancel all call restrictions, the following steps are not available. Also, you can cancel call restrictions on each option, allowing restrictions on other options to stay in force.3Scroll to one of the following options:Activate: Enter the restriction password and press OK.Cancel: Enter the restriction password and press OK.Check status: The phone lists the call types with call restriction active.4Press OK.About your restriction passwordContact your service provider for the restriction password. Change your restriction password1Press Menu 4-7-6 (Settings > Security settings > Change access codes).2Scroll to Change restriction password, then press Select.3Enter your new password, then press OK.

[ 57 ]Phone security • FIXED DIALINGOnce you setup and activate a fixed dialing list, your phone can make calls only to those numbers that you have defined in the fixed dialing list. Fixed dialing is a network feature and must be supported by your wireless provider.Note: When fixed dialing is set on, calls may be possible to certain emergency numbers in some networks (such as 911 or other official emergency numbers).Set up and activate a fixed dialing list1At the Start screen, press Menu 5-8-3 (Settings - Security Settings - Fixed dialing). After a brief pause, the options in the following table appear in the display.Note: If you activate fixed dialing and the number list is empty, all outgoing calls, except for emergency numbers such as 911, require entry of the PIN2 code.2Scroll to Number list and press Select. Fixed dialing not active and then Fixed dialing list empty appear in the display.3You are prompted to enter the PIN2 code. Enter the PIN2 code and press OK.4Enter the fixed dialing number, or press Find to retrieve a number from your Phone book and press OK.5Enter a name for the number and press OK. A confirmation note appears in the display and you are returned to the fixed dialing number list.Fixed dialing optionsOn Activate fixed dialing (see note above)Off Deactivate fixed dialingNumber list View the numbers in your fixed dialing list

[ 58 ]6Press Back, scroll to On, and press Select to activate fixed dialing.View or edit the fixed dialing list1At the Start screen, press Menu 5-8-3 (Settings - Security Settings - Fixed dialing).2Scroll to Number list and press Select.3You are prompted to enter the PIN2 code. Enter the PIN2 code and press OK.4Any numbers which you have assigned to fixed dialing appear in the display.5Scroll to a number and press Options. 6The options in the following table appear in the display.• Use the scroll keys to highlight an option• Press Select to activate or enter an option’s submenuNotes about fixed dialing• If a SIM card with fixed dialing that is activated is inserted into a phone that does not support fixed dialing, the SIM card is rejected• If you try to add a name (without a number) to the fixed dialing list, you’ll receive an error message• If you try to browse the fixed dialing list, but have not stored any Fixed dialing number optionsView number View the number for an entryAdd Add a number to your fixed dialing listEdit Edit the highlighted entryDelete Delete the highlighted entryDelete all Delete all entries in your fixed dialing list

[ 59 ]Phone securitynumbers, Fixed dialing list empty appears in the display• You cannot access SIM memory manually (view or copy numbers on the SIM card) while fixed dialing is active • ACCESS CODESWith the following access codes, you can keep your information safe:• Security code (4 to 8 digits)• PIN code and PIN2 code (4 to 8 digits)• PUK code and PUK2 code (8 digits)• Call barring password (4 digits)• Wallet code (4 to 10 digits)Note: Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.Security codeThe security code controls access to features such as the security level and is supplied with the phone. The preset code is 12345.Note: If you enter the wrong security code five times in succession, you will not be able to enter a code for five minutes, even if you power off the phone between incorrect entries.CHANGE YOUR SECURITY CODEOnce you change the security code from its preset of 12345, keep the new code secret, and in a safe place separate from your phone.1Press Menu 5-8-6-1 (Settings - Security settings - Access codes - Change security code).After a brief pause, you are prompted to enter the current security code (default is 12345).2Enter the current security code and press OK. You are prompted to enter the new security code.3Enter the new security code (up to 10 characters) and press OK.

[ 60 ]You are asked to re-enter the new security code for verification.4Enter the new security code again and press OK. A message appears in the display confirming your security code has been changed.PIN codeThe PIN code protects the SIM card from unauthorized access. The PIN code can be 4- 8 digits in length. After three successive incorrect entries the PIN code is blocked and you’ll be asked to enter the personal unblocking key (PUK) code.Note: The PIN code must be obtained from your wireless provider. The PIN code is typically provided with your SIM card.PIN CODE REQUESTEnable your phone to request the PIN code upon power-up. This provides extra security in case your phone is lost or stolen.1Press Menu 5-8-1 (Settings - Security settings - PIN code request).2After a brief pause, you are prompted to enter the current PIN code. Enter the PIN code and press OK.3Scroll to On and press OK. A message appears in the display confirming your selection.CHANGE YOUR PIN CODEBefore you can change your PIN code, you’ll need to enable PIN code request. See “PIN code request” immediately preceding this section.1Press Menu 5-8-6-2 (Settings - Security settings - Access codes - Change PIN code).2After a brief pause, you are prompted to enter the current PIN code. Enter the PIN code and press OK. 3You are prompted to enter the new PIN code. Enter the new PIN code and press OK.4You are prompted to re-enter the new PIN code for verification. Enter the new PIN code again and press OK.

[ 61 ]Phone securityA message appears in the display confirming your PIN code has been changed.PIN2 CodeThe PIN2 code is required for features such as Fixed dialing. If you enter an incorrect PIN2 code three times in succession, the PIN2 code is blocked and you’ll have to enter the PUK2 code.Note: The original PIN2 code must be obtained from your wireless provider.CHANGE YOUR PIN2 CODE1Press Menu 5-8-6-3 (Settings - Security settings - Access codes - Change PIN2 code). You are prompted to enter the current PIN2 code.2Enter the current PIN2 code and press OK. You are prompted to enter the new PIN2 code.3Enter the new PIN2 code and press OK. You are asked to verify the new PIN2 code by entering it again.4Enter the new PIN2 code again and press OK. A message appears in the display confirming you have changed the PIN2 code.Personal unblocking key (PUK) codesPUK and PUK2 codes are used to restore blocked PIN and PIN2 codes. Both PUK and PUK2 codes are eight characters in length and cannot be changed. PUK and PUK2 codes must be obtained from your wireless provider.Important: If you enter an incorrect PUK or PUK2 code 10 times in succession, the message SIM rejected appears in the display and the SIM card can no longer be used. You must contact your wireless provider for a new SIM card.

[ 62 ] • SET UP A CLOSED USER GROUPThis network service specifies the group of people whom you can call and who can call you. Default resets the phone to use a user group that the SIM card owner has agreed upon with the service provider.Note: When calls are limited to closed user groups, calls may be possible to certain emergency numbers in some networks (such as 911 or other official emergency number).Turn on closed user groups1Press Menu 5-8-4 (Settings >Security settings > Closed user group).2Scroll to On, enter the group number, then press Select.Turn off closed user groups1Press Menu 5-8-4 (Settings >Security settings > Closed user group).2Scroll to Off, then press OK.Call barring password for closed user groupsA closed user group is a network service that specifies the group of people whom you can call and who can call you. For more information, contact your service provider.Wallet codeThe wallet code is needed to access the wallet services. If you key in a wrong wallet code several times, the wallet application is blocked for five minutes. See “Wallet” on page 151 for more information.

[ 63 ]Menu functions7 Menu functionsMessages (Menu 1)If you have subscribed to a message service, you can send and receive messages to compatible phones that are also subscribed to a message service. You can also send and receive picture messages, multimedia messages, and e-mail if supported by your network. Composed messages can be up to 450 characters in length.Note: Please see “Text entry” on page 50 for more information.Note: When your phone is dedicated to a call in progress, a JavaTM application (such as a game), or an active web browser connection, then the phone cannot receive multimedia messages.Linked messagesYour phone can send and receive long messages (up to 450 characters) in sequences. While receiving linked messages, you can start reading the first part before the phone has received the entire message.While viewing the message, you may see *some text missing* on the display. This is normal, and the message content will be updated as soon as the missing sequence arrives.If the memory is full, you may have to delete a message from your inbox or outbox before your phone can update the missing text.Before you can send and receive messagesYou’ll need the following to send and receive messages:• A messaging service through your wireless provider• A message center number, which must be saved to your phone (if your wireless provider has not done so already)

[ 66 ] • WRITE AND SEND A TEXT MESSAGENote: This feature uses shared memory. Please see “Shared memory” on page 24 for more information.1At the Start screen, press Menu 01-1-1 (Messages - Text messages > Create message).Tip: To go quickly to the Create message display, press the Left selection key at the Start screen.2After a brief pause, the message entry screen appears in the display.3Compose a message using the keypad and press Options.4Scroll to Send and press Select.5Enter the recipient’s phone number, or press Find to retrieve a number from your Phone book, and press OK. Your message is sent.Read messagesWhen you receive a message, your phone beeps and Message received appears in the display as well as the unopened letter icon ( ).1Press Show to read the message, or Exit to move it to your inbox.Note: When you have unopened messages in your inbox, is shown in the upper left corner of the Start screen as a reminder.2Use the scroll keys (the Scroll up key or the Scroll down key) to view the whole message if necessary. Tip: Keep scrolling to view other information, such as the sender number and time the message was sent.Exit editor Save the message to your archive automatically and leave the message editor.Predictive textStart the predictive text utility.Option Function

[ 67 ]Menu functions3Press Back to move the message to the Inbox, or press Options for other choices, such as Reply or Forward.Read linked messagesYour phone can receive one long message (up to 450 characters) in sequences. You can start reading the first part before the phone has received the entire message.While viewing the message, you may see *some text missing* on the display. This is normal, and the message content will be updated as soon as the missing sequence arrives.If the memory is full, you may have to delete a message from your inbox or outbox before your phone can update the missing text.Reply to a message1While viewing a message, press Options, scroll to Reply, and press Select.2Compose your reply using the keypad, then press Options, scroll to Send, and press Select. 3The number of the original sender appears in the display. Press OK and your reply is sent.Forward a message1While viewing a message, press Options. 2Scroll to Forward and press Select.3Enter the recipient’s phone number, or press Find to retrieve a number from your Phone book.4Press OK. The message is forwarded. • PICTURE MESSAGESNote: This feature uses shared memory. Please see “Shared memory” on page 24 for more information.

[ 68 ]Your phone comes with 10 pre-loaded pictures. You can, however, over-write any of the 10 pictures that come with your phone. Pictures can be attached to a message and sent via text message to compatible phones. Picture messages behave the same as text messages, but pictures take up more space than text. Pictures are stored in the “Templates” folder under Messages - Templates.Note: You cannot send a picture message via e-mail.Download picturesYour phone can download pictures, or receive them from compatible phones via text messaging to use in messages. You can also create pictures and send them to your phone or other compatible phones using Nokia PC Suite.Note: This function can be used only if it is supported by your wireless provider. Only phones that offer picture message features can receive and display picture messages. Contact your wireless provider for details.When you receive a picture messageWhen you receive a picture message, your phone beeps and Message received appears in the display as well the message icon ( ).1Press Show to view the picture message, or press Exit to move it to your inbox.2If you have more than one picture message, scroll to the message of your choice and press Select to view the message.Note: When you have unopened picture messages in your inbox, is shown in the upper left corner of the Start screen as a reminder.3Use the scroll keys to view the whole picture if necessary. Tip: Keep scrolling to view other information, such as the sender number and time the message was sent.4Once you are finished, press Back to move the picture message to the

[ 69 ]Menu functionsInbox, or press Options for other choices, such as Reply or Forward.TO SAVE THE PICTUREIf you’d like to save the picture to your Templates folder for later use:1Press Options, scroll to Save picture, and press Select. You can then enter a title for the picture and press OK.Note: If your templates folder is full of pictures, just scroll to the picture you’d like to replace and press Select.Compose and send a picture messageOne picture message is equivalent in size to 3 text messages. When you insert a picture into a message, you’ll have enough remaining space for about 121 characters in the message. If you try and insert a picture into a message that is almost full of text, a beep sounds and you are prompted to delete some text before proceeding.1At the Start screen, press Menu 01-1-1 (Messages - Text messages - Create message). After a brief pause, the message edit screen appears in the display.2Write a message using the keypad (or enter nothing if you choose to just send a picture), and press Options.Tip: Insert pictures before adding text. You can then check remaining space for text in the upper right corner of the display.3Scroll to Insert picture and press Select. A list of pictures appears in the display.4Scroll to a picture and press View.5Press Insert to insert the picture into your message, otherwise:a) Press Back, scroll to another picture, and press View again.b) Press Insert to insert the picture into your message.6To send the picture message, press Options, scroll to Send, and press Select.7Enter the phone number for your recipient (or press Find to retrieve a

[ 71 ]Menu functionsfrom your Phone book, and press OK.3Enter a subject for the e-mail and press OK.4Compose your e-mail using the keypad and press Options.Tip: Be sure and leave enough space in the total character count (160) for the e-mail address.5Scroll to Send e-mail, if necessary, and press Select. Your e-mail is sent.Reply to a message or e-mailWhen you have received a text message or e-mail, , the number of new messages and ___ Message(s) received appears in the display.Note: The blinking indicates that the message memory is full. Before you can receive new messages, delete some of your old messages. See “Delete messages” on page 84 for more information.• Press Show to view the message now, or Exit to view it later.READING THE MESSAGE LATER1Press Menu, and select Messages, Text messages and Inbox.2If more than one message is received, select the message you want to read and press Select.An unread text message is indicated by in front of the message, and an unviewed picture message by . • MULTIMEDIA MESSAGESNote: This feature uses shared memory. Please see “Shared memory” on page 24 for more information.A multimedia message (MMS) can contain text, sound, and a picture. Your phone supports multimedia messages that are up to 3045 KB. If the maximum size is exceeded, the phone may not be able to receive the message. Depending upon your network, you may receive a message that

[ 72 ]includes an Internet address where you can go to view the multimedia message. Pictures are scaled to fit the display area of the phone. Your phone has a multimedia message viewer for playing messages and a multimedia inbox for storing saved messages. Once you save the multimedia message, you can use the image as a screen saver or the sound as a ringing tone.Note: This function can be used only if it is supported by your wireless provider. Only compatible devices can receive and display multimedia messages.Note: The default setting of the multimedia message service is on, and your wireless provider may charge for messages received.Multimedia messaging supports the following formats:• Picture: JPEG, GIF, PNG, OTA-BMP and WBMP.• Sound: SP-MIDI and monophonic ringing tones.Note: If a received message contains unsupported elements, they may be replaced with the text Object format not supportedDefine MMS settingsBefore you can use the multimedia message feature, you need to first define the way you want to receive the messages.ALLOW MULTIMEDIA RECEPTIONYou can choose to receive all messages or to receive messages only when you are in the service provider’s home network.1At the Start screen, press Menu 01-6-2-2 (Messages - Message settings - Multimedia msgs. - Allow multimedia reception). After a brief pause, a list of options appears in the display.•Yes to allow all incoming messages•In home system to allow incoming messages only if you are in the service provider’s home system.2After selecting one of the reception options, scroll to Incoming multimedia messages, then press Select.

[ 73 ]Menu functions3Scroll to Retrieve, then press Select.BLOCK MULTIMEDIA RECEPTION1At the Start screen, press Menu 01-6-2-2 (Messages - Message settings - Multimedia msgs. - Allow multimedia reception). After a brief pause, a list of options appears in the display.2Scroll to No and press Select. ALLOW OR NOT ALLOW ADVERTISEMENTSNote: This setting is not available if multimedia reception is blocked.1At the Start screen, press Menu 01-6-2-5 (Messages - Message settings - Multimedia msgs. - Allow advertisements). After a brief pause, Yes and No appear in the display.2Scroll to the setting of your choice and press Select. Other MMS settingsOther multimedia settings include saving your messages to the Sent items folder and editing your connection settings.1At the Start screen, press Menu 01-6-2 (Messages - Message settings - Multimedia msgs.). After a brief pause, a list of options appears in the display.2Scroll to an option. Press Select to activate the option or to enter its submenu.MessageSetting FunctionSave sent messagesSaves sent multimedia messages to the Sent items folderAllow multimedia receptionChooses Yes, No, or In home network for your multimedia service. In home network cannot receive multimedia messages outside the home network.

[ 74 ]Edit multimedia connection settings1At the Start screen, press Menu 01-6-2-4 (Messages - Message settings - Multimedia msgs. - Connection settings).2Scroll to Edit active multimedia settings and press Select.Incoming multimedia messagesSelect Retrieve to receive multimedia messages, or Reject if you do not wish to receive multimedia messages.Connection settingsDefine web browser settings for retrieving multimedia messages. Activate the set where you want to save the connection settings and then edit the settings.Allow advertisementsAllows you to enable or disable reception of automatic multimedia advertisementsMessageSetting Function

[ 75 ]Menu functions3The connection settings in the following table appear in the display. Scroll to a setting. Press Select to enter the setting’s submenu.ABOUT CONNECTION SETTINGSYou may be able to receive multimedia connection settings as a text message from your wireless provider. For more information, contact your wireless provider.SELECT A FONT SIZE FOR YOUR MESSAGES1Press Menu 01-6-3-1 (Messages - Message settings - Other settings - Font size). After a brief pause a list of choices appear in the display.2Scroll to Small font or Large font and press Select. A message appears in the display confirming your selection.Connection setting FunctionSettings’ name Rename the setting to your preferenceHomepage Enter the homepage where your browser retrieves multimedia messagesSession mode Select session modes Temporary or PermanentData bearer Select the data bearerGPRS access pointDefine the access pointIP address Enter or change the IP addressAuthentication typeSelect from Normal or SecureUser name Edit or enter your user namePassword Edit or enter a password

[ 76 ]Write and send a multimedia messageFor availability and subscription to the multimedia messaging service, contact your wireless provider.1At the Start screen, press Menu 01-2-1 (Messages - Multimedia messages - Write message). After a brief pause, the message entry screen appears in the display.2Enter the text of your message and press Options.3Scroll to Insert image or Insert sound clip and press Select.4Choose your image or sound clip from the list and press Select.5Scroll to Send to number or Send to e-mail and press Select.Note:If you have attached a picture or sound clip to the message, you cannot send the message via e-mail.6Enter the number of the recipient, or the e-mail address and press Select. The message is sent.Read and reply to a multimedia messageWhen a multimedia message is being received, appears (blinking) in the display. Once the message has been fully downloaded, and Multimedia message received appears in the display.1To view the message, press Show. To view the message later, press Exit (and then No when asked to discard).2While viewing the message, press Options. Some or all of the following options may appear in the display. Scroll to an option and press Select to activate the option or enter its submenu.Option FunctionDelete messageDelete a saved messageReply Reply to the message. Press Options and then Send. The sender’s phone number or e-mail is used as the defaultForward to no. Forward the message to another number

[ 77 ]Menu functionsNote: If blinks and Multimedia memory full, view waiting msg. appears in the display, memory for multimedia messages is full. You need to delete some of your old messages. See “Delete messages” on page 84 for more information.ChatYou can have a conversation with another person using this “faster text messaging” application. You cannot save messages, but you can view them while chatting. Chat messages costs about the same as text messages.START A CHAT SESSION1At the Start screen, press Menu 01-3 (Messages - Chat). After a brief pause, you are prompted to enter the recipient’s phone number.2Enter the recipient’s number or press Find to retrieve a number from the phone book, and press OK.3Enter your Chat name (up to 5 characters) and press OK.Another way to start a chat: When you have received a message, press Show to read it. To start a chat, press Options and select Chat.4Enter your chat message using the keypad. For faster ways to write a message, see “Predictive text input” on page 51.Forward to e-mailForward the message to an e-mail addressEdit Edit the message. You can only edit messages that you have writtenDetails View the message subject, size, and classPlay Listen to a sound clip in the message, if one is includedSave tone Save a ringing tone, if included, to the galleryZoom in Enlarge the pictureSave image Save any picture that is attached to your picture galleryOption Function

[ 79 ]Menu functionsTip: Save yourself the trouble of entering the mailbox codes each time you dial voicemail. See “Automate voicemail” later in this section for more information.Call and setup your voicemail1Once you have saved the voice mailbox number, press and hold the 1 key. 2When you connect to voicemail and the pre-recorded greeting begins, follow the service’s automated instructions to setup your voicemail.Listen to your voice messagesOnce you have setup voicemail, you can dial the number in one of 4 ways:• Dial the number using the keypad• Press and hold the 1 key• Press Listen if there’s a notification message in the display• Press Menu 01-4-1 (Messages - Voice messages - Listen to voice messages). After a brief pause, your phone dials the voicemail number.Once you connect and the pre-recorded greeting begins, follow the automated instructions to listen to your voice messages. • AUTOMATE VOICEMAILYou can insert special characters called “dialing codes” into phone numbers such as voicemail and then save the number to a 1-touch dialing location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string.Note: Each voicemail service can vary. The examples and steps that follow are for clarification. Check with your wireless provider if you have specific questions about your voicemail service.Write down some information1Write down your voice mailbox number.

[ 80 ]2Call and check your voicemail as you normally would.3Write down your interaction with the recorded prompts step-by-step. Keep in mind that each voicemail service may vary. However, it should look something like this:Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press pound key.Important: Be precise, you’ll need this information in “Setup voicemail with dialing codes” later in this section.LEARN HOW TO INSERT DIALING CODESPress the Star key repeatedly to cycle through dialing codes. Once the desired code appears in the display, pause briefly and the code is inserted into the dialing string.For example, press the Star key four times to display the “w” (wait character). Pause briefly and the wait character is inserted into the dialing string. Available dialing codes are as follows:Setup voicemail with dialing codes1At the Start screen, press Names, scroll to 1-touch dialing, and press Select.2Scroll to an empty 1-touch dialing slot and press Assign.3Enter your voice mailbox number, including the area code.4Refer to the table entitled “dialing codes,” and enter any codes as necessary using the information that you wrote down earlier.Dialing codes*Bypasses a set of instructions+Precedes an international telephone numberpPauses for 2.5 seconds before sending any numbers that followwWait. Your phone waits for you to press the Talk key before it sends any numbers or codes that follow.

[ 81 ]Menu functionsFor example, if you pause for 5 seconds after connecting to voicemail, enter p twice after the voice mailbox number, such as 2145551212pp.5Enter any remaining pauses, PIN codes, and other information that allows you to listen to your messages, then press OK.6Enter a name (such as Voicemail) and press OK. A message appears in the display confirming your 1-touch dialing location has been saved.Now, to dial and listen to your voicemail, just press and hold the assigned 1-touch dialing key at the Start screen. No other keypresses should be necessary to connect and listen to your messages. • MESSAGE OPTIONSSome or all of the options in the following table are available for text messages, picture messages, multimedia messages, and e-mail.1While viewing a text, picture, multimedia message, or e-mail press Options.2Scroll to highlight an option. Press Select to activate the option or enter its submenu.Option FunctionDelete Delete the message you are viewingReply Reply to the message; you have the option to include the Original text in the reply, a template, or empty screenUse detail Extract numbers, e-mail addresses and website addresses from the current messageForward Forward the message to another recipientEdit Edit the message

[ 82 ] • ORGANIZE MESSAGES WITH FOLDERSSave messages to foldersYou can save messages to an existing folder or to a folder that you have created.1Press Menu 01-1-1 (Messages - Text message - Create message). After a brief pause, the message entry screen appears in the display.2Write your message and press Options.3Scroll to Save message and press Select.4Scroll to the Archive, Templates, or My folders (if you have created a folder of your own) and press Select. The message is saved.View saved messages1At the Start screen, press Menu 01-1 (Messages - Text messages).2After a brief pause, scroll to the folder containing the message you wish to view and press Select.3Once the folder opens, scroll to the message you wish to view and press Select.Move Move the message to a folder you specifyRename Rename the message before it is saved to a folderCopy to CalendarCopy text from the beginning of the message to your phone’s calendar as a reminder note for the current day.Message detailsView the sender’s name and phone number, the message center used, reception date and time.Option Function

[ 83 ]Menu functionsInbox folderMessages are automatically stored in the inbox after they have been read or if you press Back when Message received appears on the Start screen.Outbox folderMessages that you have created but have not sent are automatically stored in the outbox.Archive folderStore messages that have been read in the Archive folder.Templates folderPictures and pre-written templates are stored in the Templates folder. Pre-loaded templates can be edited/customized.My foldersKeep your messages organized by creating custom folders and saving some of your messages there.ADD A FOLDER OF YOUR OWN1At the Start screen, press Menu 01-1-7 (Messages - Text messages - My folders). After a brief pause, the folder opens. 2Press Options. Scroll to Add folder and press Select.3Enter a name for the new folder and press OK. The folder is added.REMOVE A FOLDEROnly folders created in My folders can be deleted. The Inbox, Outbox, Archive, and Template folders are protected. When you delete a folder, all messages in the folder are also deleted.1At the Start screen, press Menu 01-1-7 (Messages - Text messages - My folders). After a brief pause, the folder opens.2Any folders that you have created appear in the display. Scroll to the folder you wish to remove and press Options. 3Scroll to Delete folder and press Select. You are asked to confirm the

[ 84 ]deletion.4Press OK to delete or Back to exit.Move a message to a folder1While viewing the message, press Options.2Scroll to Move and press Select.3Scroll to the destination folder and press Select. • DELETE MESSAGESIf your message memory is full and you have more messages waiting at the network, blinks in on Start screen. You can do the following to create more space:• Read some of the unread messages and then delete them• Delete messages from some of your foldersDelete a single messageTo delete a single message, you need to open it first.1Press Menu 01-1 (Messages - Text messages). After a brief pause, a list of options appears in the display.2Scroll to the folder containing the message you wish to delete and press Select. A list of messages, if you have any, appears in the display.3Scroll to the message you wish to delete and press Select. The message opens.4Press Options, scroll to Delete, and press Select.5You are asked to confirm the erasure. Press OK to delete the message or Back to exit.

[ 87 ]Menu functionsits submenu.RECEIVE MULTIMEDIA CONNECTION SETTINGS AS A TEXT MESSAGEYou may be able to receive multimedia connection settings as a text message from your wireless provider. For more information, contact your wireless provider.SELECT A FONT SIZE1Press Menu 01-6-3-1 (Messages - Message settings - Other settings - Font size). After a brief pause, a list of choices appear in the display.2Scroll to Small font or Large font and press Select. A message appears in the display confirming your selection.Use the info message serviceWith the info message network service, you can receive short text messages on various topics, such as weather and traffic conditions, from your wireless provider. 1At the Start screen, press Menu 01-5 (Messages - Info messages). After a brief pause, the list of options in the following table appears in the display.Message setting FunctionSave sent messagesSaves sent multimedia messages to the Sent items folderAllow multimedia receptionChooses Yes, No, or In home network for your multimedia service. In home network cannot receive multimedia messages outside the home networkIncoming multimedia messagesSelect Retrieve to receive multimedia messages, or Reject if you do not wish to receive multimedia messagesAllow advertisementAllows you to enable or disable reception of automatic multimedia advertisements

[ 88 ]2Scroll to an option. Press Select to activate the option or to enter its submenu.Note: For more information on topics, contact your wireless provider.Use service commandsUse the Service commands editor to enter and send service requests (also known as USSD commands) to your wireless provider. Contact your wireless provider for information about specific service commands.1At the Start screen, press Menu 01-7 (Messages - Service commands).2Enter a service request, such as an activation command for a specific network service, and press Send.Message setting FunctionInfo service Select On or Off to activate or deactivate the serviceTopics Options for selecting, adding, editing, and deleting info topicsLanguage Select the language in which info messages are received. The language you select does not affect the language you select under the Phone settings menuInfo topics saved on SIM cardSelect one or more info topics to save to your SIM card

[ 89 ]Menu functionsCall log (Menu 2) Call log stores information about the last 10 missed, 10 received, or 20 dialed calls. It also adds the total duration of all calls. When the number of calls exceed the maximum, the most recent call replaces the oldest. For Call log to work properly:• Your wireless provider must support caller ID, and it must be enabled• Your calls cannot be blocked• Your phone must be on and within the service area • CALL LOG OPTIONSWhether you are viewing missed, received, or dialed calls, each of the menu options will be the same. Please refer to the following table regarding menu options for these features.Missed, received, and dialed call optionsCall time Display the date and time of the callSend message Send a message to the numberView number Display the numberEdit number Edit the number and associate a name with the numberSave Enter a name for the number and save it to your Phone bookAdd to name Add the number to an existing entry in your Phone book, if the number is not associated with a nameDelete Clear the number from memoryCall Call the number

[ 90 ] • VIEW MISSED CALLSMissed calls are calls that were never answered. You can check for missed calls in two ways:Note: The Missed calls feature does not function while your phone is off or outside of the service area.1If # missed call appears in the display, press List. The phone number appears in the display.2Press Options to display the options listed in the table on page 89.3Scroll to an option, press Select to activate the option or to enter its submenu.OR1At the Start screen, press Menu 2-1 (Call log - Missed calls).After a brief pause, a list of missed calls appears in the display (if any exist).2Scroll to a name or number and press Options to display the options listed in the table on page 89.3Scroll to an option, press Select to activate the option or to enter its submenu. • VIEW RECEIVED CALLSReceived calls are calls that have been answered.1At the Start screen, press Menu 2-2 (Call log - Received calls).After a brief pause, a list of received calls appears in the display (if any exist).2Scroll to a name or number and press Options to display the options listed in the table on page 89.3Scroll to an option, press Select to activate the option or enter its submenu.

[ 91 ]Menu functions • VIEW DIALED NUMBERSYou can view dialed numbers in one of two ways:1At the Start screen, press the Talk key. Your most recently dialed numbers appear in the display.OR2At the Start screen, press Menu 2-3 (Call log - Dialed numbers). After a brief pause, your most recently dialed numbers appear in the display.3Scroll to a name or number and press Options to display the options listed in the table on page 89.4Scroll to an option, press Select to activate the option or enter its submenu.Call timesYou can receive up to five calls from the same number and view the time each call occurred. Your clock must be set for this feature to work accurately. See “Set the clock” on page 42 for instructions on setting your clock.1While viewing a missed or received call, press Options, scroll to Call time, and press Select.2The time that the last call occurred appears in the display. 3Press the Scroll down key to view other call times from this number. Press Back to return to the options list. • CLEAR CALL LISTSTo clear any missed, dialed, or received calls from your phone’s memory:1At the Start screen, press Menu 2-4 (Call log - Delete recent call lists).After a brief pause, All, Missed, Received and Dialed appear in the display.2Scroll to the call type you’d like to clear and press Select.

[ 92 ] • VIEW CALL DURATION1Duration of last call. At the Start screen, press Menu 2-5-1 (Call log - Call timers - Duration of last call). The duration of your last call appears in the display.2Duration of dialed calls. At the Start screen, press Menu 2-5-3 (Call log - Call timers - Duration of dialed calls). The duration of all dialed calls appears in the display.3Duration of received calls. At the Start screen, press Menu 2-5-2 (Call log - Call timers - Duration of received calls). The duration of all received calls appears in the display.4Duration of all calls. At the Start screen, press Menu 2-5-4 (Call log - Call timers - Duration of all calls). The duration of all calls (missed, dialed, and received) appears in the display.

[ 93 ]Menu functionsPhone book (Menu 3)Your phone book can save up to 500 names, with multiple numbers and text notes for each name. The amount of numbers and text entries that you can save may vary, depending on their length and the total number of entries in the Phone book.Note: This feature uses shared memory. Please see “Shared memory” on page 24 for more information. • VIEW THE PHONE BOOK MENU1At the Start screen, press the Right selection key under Names. The menu items in the left column of the following table appear in the display.2Scroll to an item. Press Select to activate the feature or enter its submenu.Menu item FunctionFind Find a name or select from a listAdd entry Add a name to your Phone bookEdit name Edit an existing nameDelete Delete a name and its associated numbersCopy Copy entries from Phone memory to SIM and vice versaAdd number Add a number to an existing nameSettings Set memory in use (Phone or SIM), change your Phone book view, and check the memory status of your Phone and SIM card

[ 94 ] • SAVE NAMES AND NUMBERSYou can save names and numbers to phone memory or to SIM memory.Quickly save a name and number1At the Start screen, enter the phone number you wish to save.2Press Options, ensure Save is highlighted, and press Select.3Enter a name for the number and press OK. A confirmation message appears in the display indicating your entry has been saved.Quickly save (only) a numberYou can save a phone number as a stand-alone entry in your phonebook.1At the Start screen, enter the number you wish to save.2Press and hold Options. A message appears in the display confirming your number is saved. Save an entry using the Phone book menu1At the Start screen, press Names, scroll to Add entry and press Select.2Enter a name using the keypad and press OK.3Enter a number and press OK.1-touch dialingDisplay the list of 1-touch dialing numbers saved to memoryService numbersDisplay a list of numbers related to your wireless providerOwn numbers View the numbers (line 1, line 2, data) in use by your SIM cardCaller groups View and edit the properties (such as the ring tone) for any of the caller groupsMenu item Function

[ 95 ]Menu functions4Press Done to return to the Start screen.Save addresses and notesTo save an email address, you’ll need to add it to an existing entry (name). 1Find the entry (name) in your Phone book to which you’d like to add an address or note.2With the entry highlighted, press Details.3Press Options, scroll to Add detail and press Select.4Scroll to the address or note of your choice and press Select.5Enter the text for the note or address and press OK.Select your Phone book view and memory1Press Names, scroll to Settings, and press Select. 2Scroll to any of the options in the following table. Press Select to enter the option’s submenu.Option FunctionMemory in useSelect the memory you wish to use. Options are Phone, SIM card, or Phone and SIM combined. With Phone and SIM selected, names and numbers are saved to phone memory but entries saved to both memories appear in the displayPhone book viewSelect the Name list, Name and number, or Name only viewMemory statusView the amount of phone or SIM memory used as well as the amount of phone or SIM memory available

[ 96 ]Save multiple numbers and text items per nameYou can save different types of phone numbers and short text items per name to the Phone book. The first number you save for any entry is automatically set as the default, or primary number.1At the Start screen, press the Scroll up key or the Scroll down key and scroll to the entry to which you wish to add a number or text item.2Press Details, and then press Options.3Scroll to Add number or Add detail and press Select.4Scroll to one of the following types and press Select: 5Enter the number or text for the type you have selected and press OK.• To change the type, select Change type in the options list.CHANGE THE DEFAULT (PRIMARY) NUMBER1At the Start screen, press the Scroll up key or the Scroll down key, scroll to the entry you wish to change and press Details. 2Scroll to the number you wish to set as default and press Options.3Scroll to As primary no. and press Select.Search for a name in the Phone book1At the Start screen, press the Scroll up key or the Scroll down key to display the contents of your Phone book.2Press the key which corresponds to the first letter of the name for which you are performing a search.3Press the Scroll up key or the Scroll down key to scroll up and down through names in the list. Press the Left selection key or the Right selection key to move the General Mobile Home Work Fax E-mail address Web address Street address Note

[ 97 ]Menu functionscursor left or right in the search window at the bottom of the display, if necessary.4Press Details to view the details of the selected name.Edit a name, number or text item1Search for the entry as described in the previous section and press Details.2Scroll to the name, number or text item you wish to edit and press Options. 3Scroll to Edit name, Edit number, or Edit detail and press Select. 4Edit the name, number, or detail to your preference and press OK.Delete names and numbers1At the Start screen, press Names, scroll to Delete, and press Select.2To delete individual names and numbers, scroll to One by one and press Select. 3Scroll to the entry you wish to delete, press Delete, and press OK to confirm the deletion.4To delete the entire contents of your Phone book, scroll to Delete all, then scroll to the phone book you wish to delete (Phone or SIM card).5Press Delete, then press OK to confirm. You are asked to enter the security code.6Enter the security code and press OK.Add an image to a name or numberYou can add an image to a name or number saved in the Phone book.1At the Start screen, press Names, scroll to an entry, and press Details.2Press Options and select Add image to open the Gallery.3Scroll to an image in the Gallery and press Options.4Select Save to phone book to add the image to a name or number.

[ 98 ] • COPY PHONE BOOK ENTRIES1At the Start screen, press Names, scroll to Copy, and press Select.2Scroll to From phone to SIM card or From SIM card to phone and press Select. The following options appear in the display:3Scroll to the copy method of your choice and press Select. a) If you selected One by one, go to step 4.b) If you selected All or Primary nos., go to step 6.4Scroll to the entry you wish to copy and press Copy.5Scroll to Keep original or Move original and press Select. The entry is copied and you are returned to the list of Phone book entries.6If you selected All or Primary nos. in step 3, scroll to Keep original or Move original and press Select.7Press OK to confirm your choice. All entries are copied to the selected destination. Press Back to return to the list of Phone book entries, or press the End key to exit and return to the Start screen.Caution: Select Keep original if you are unsure of which copy method to use. This ensures original entries are merely copied to the new location. Move original deletes files after copying.Send and receive business cardsYou can send and receive an entry in your Phone book via IR or text message, if supported by your wireless provider.RECEIVE A BUSINESS CARD VIA IR1Press Menu 13-1 (Connectivity - Infrared) to ensure IR is activated.When you receive the business card, your phone beeps and a message One by one Select and copy entries one by oneAll Copies all entries from the SIM card or Phone*Primary nos. Copies only primary numbers. This appears only if you select From phone to SIM.

[ 99 ]Menu functionsappears in the display. 2Select Save to save the business card in the phone’s memory, or press Exit (or OK) to discard the business card.SEND A BUSINESS CARDYou can send a business card via IR or as an text message to a compatible phone or other handheld device.1Highlight an entry from the Phone book that you wish to send and press Details.2Press Options, scroll to Send bus. card and press Select.• To send the business card via IR, make sure the receiving device is set up to receive data via its IR port and select Via infrared.• To send the business card as a message, select Via text message.3If you selected Via infrared (and the entry has multiple sub-entries) scroll to Primary no. or All details and press Select. Your business card is sent.4If you selected Via text message (and the entry has multiple sub-entries), scroll to Primary no. or All details and press Select.5Enter the number for your recipient or press Find to retrieve a number from your Phone book.6Press OK and the business card is sent. • 1-TOUCH DIALINGYou can associate any entry in your Phone book with the 2 key through the 9 key and then dial those entries by pressing and holding the assigned key.Assign a key to 1-touch dialing1At the Start screen, press Names, scroll to 1-touch dialing and press Select.

[ 100 ]2Scroll to any empty slot and press Assign.3Enter the number (including the area code) and press OK, or press Find to retrieve a number from your Phone book.4Enter a name for the number and press OK. • If 1-touch dialing is off, the phone displays a prompt asking if you’d like to turn 1-touch dialing on. Press Yes to activate 1-touch dialing. 5The entry appears in the slot you have assigned.Make a call with 1-touch dialing• Press and hold the key to which an entry has been assigned. Your phone dials the entry assigned to the key.CHANGE 1-TOUCH DIALING NUMBERS1At the Start screen, press Names, scroll to 1-touch dialing and press Select.2Scroll to the 1-touch dialing entry you wish to change and press Options.3Scroll to Change and press Select.4Enter the new number, or press Find to retrieve a number from your Phone book, and press OK.5Enter a name for the entry and press OK. DELETE 1-TOUCH DIALING NUMBERS1At the Start screen, press Names, scroll to 1-touch dialing and press Select.2Scroll to the 1-touch dialing location you wish to delete and press Options.3Scroll to delete and press Select. You are asked to confirm the deletion.4Press OK to delete the key assignment.

[ 101 ]Menu functions • VOICE DIALING You can dial up to 10 stored numbers in your phone book using the voice dialing feature. Before you can place a call using voice dialing, you must first assign a voice ‘tag’ to the number.Note: Your phone must be on to use this function. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.Assigning a voice tag to a phone numberYou can create a voice tag (such as a person’s name) for up to 10 phone book entries, then dial the number using the voice dialing feature. See “Dial a number using voice dialing” on page 101 for more information. It is easier for the phone to differentiate between long, unique voice tags. For example, you might want to record a person’s first and last names rather than only the first name.ASSIGNING A VOICE TAG TO AN ENTRY1At the Start screen, scroll to the name you want to give a voice tag.2Press Details, then Options, and scroll to Add voice tag. 3Press Select. The phone displays Press Start, then speak after tone.4Press Start. You hear several beeps, and Please speak now appears. 5Speak clearly into the microphone.Note: Do not press Quit unless you want to cancel the recording.The phone automatically stops recording and then saves and replays the voice tag.If recording is not successful, your phone displays Voice system error. Press Options, scroll to Add voice tag, and repeat Steps 3-5.DIAL A NUMBER USING VOICE DIALINGBefore using voice dialing, note that:

[ 102 ]• Voice tags are not language-dependent. A voice tag depends on the speaker’s voice.• Voice tags are sensitive to background noise. For best results, record them and make calls in a quiet environment.• When recording a voice tag or making a call by saying a voice tag, hold the phone in the normal position near to your ear.• Very short names are not accepted. Use long names and avoid similar names for different numbers.• Voice tags must be shorter than 2 seconds. Record them and make calls in a quiet environment.Note: You must say the name exactly as you said it when you recorded it. This may be difficult in, for example a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.1Press and hold the Contacts selection key.When you hear several beeps and Please speak now appears, release the button.Note: If you have the optional headset attached, press and hold the headset button. When the phone beeps and Please speak now appears, release the button.2Pronounce the voice tag clearly into the microphone. When the phone finds the voice tag, Found appears, and the phone automatically dials the number.If the phone does not locate a number, No match found appears. If you are using the headset and the phone does not locate the number, you will hear an error tone and No match found appears. To start voice dialing again, press and hold the headset button immediately after the error tone.WORK WITH AN EXISTING VOICE TAGAfter you have associated a voice tag to a command, you can choose one of the following options:

[ 103 ]Menu functionsPlay back a voice tag1Press Contacts and scroll to Voice tags.2Press Select, then scroll to the name with the voice tag you want to hear.3Press Options, scroll to Playback, and press Select.Change a voice tag1Press Contacts and scroll to Voice tags.2Press Select, then scroll to the name with the voice tag you want to change.3Press Options, scroll to Change, and press Select.4The phone displays Press Start, then speak after tone.5Press Start.6The phone repeats your voice tag, and Voice tag saved appears.Delete a voice tag1Press Contacts and scroll to Voice tags.2Press Select, then scroll to the name with the voice tag you want to erase.3Press Options, scroll to Delete, and press Select. Delete voice tag? appears. 4Press OK to erase the voice tag. • VIEW INFO, SERVICE, AND OWN NUMBERSYour wireless provider may have saved your phone’s operating number, as well as various information and service numbers to your SIM card.Note: This feature may not be supported by your SIM card. If so, contact your wireless provider for more information.

[ 105 ]Menu functionsSetup a caller group1At the Start screen, press the Scroll up key or the Scroll down key to display a list of entries in your Phone book.Tip: Perform a “quick find” when Phone book entries are displayed by entering the first letter of a name. appears at the bottom of the display to indicate you are performing a search.2Scroll to a name you’d like to add to a caller group and press Details.3Press Options, scroll to Caller groups, and press Select.4Scroll to the caller group to which you’d like to add the name and press Select. A confirmation message appears in the display.

[ 109 ]Menu functionsSettings (Menu 5)Use this menu to set or change the Right selection key (My Menu) settings, time and date settings, call settings, phone settings, display settings, tone settings, enhancement settings, security settings, and to restore factory settings. • RIGHT SELECTION KEY SETTINGSYou can change the function of the Right selection key on your phone so that your most frequently used functions can be quickly accessed from the Start screen. Choose functions1At the Start screen, press Menu 5-1 (Settings - Right selection key settings).2After a brief pause, Options is highlighted in the display. Press Select.3Use the Scroll up key and the Scroll down key to highlight the desired function from the list of available functions.4Press Mark. A mark appears in the box next to the selected function indicating that you have selected the function. Use Unmark to remove a function from the list.Note: The Names function cannot be Unmarked from the list.5Repeat steps 3 and 4 to select as many functions as you wish.6Press Done when you have added all desired functions.7Save changes? appears in the display. Select Yes.At the Start screen, Go to is now the option for the Right selection key on your phone. Select Go to to display a list of the functions that you selected in steps 4 and 5.

[ 110 ]Organize functions1At the Start screen, press Menu 5-1 (Settings - Right selection key settings).2Scroll to Organize and press OK. The list of functions is displayed.3Use the Scroll up key and the Scroll down key to highlight the function you wish to rearrange and select Move.4Highlight Move up, Move down, Move to top, or Move to bottom from the list of choices and press Select.The list of right selection key functions is displayed in the new order. • TIME AND DATESet the clock1At the Start screen, press Menu 5-2-1 (Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Scroll to Set the time and press Select.3Enter the time (in hh:mm format) and press OK.4Scroll to am or pm and press Select. The time is set.Show/hide the clockYou have the option of displaying (or not displaying) the clock on the Start screen.1At the Start screen, press Menu 5-2-1 (Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Press Select.

[ 111 ]Menu functions• If your clock was previously “hidden,” (not shown on the display), it will now appear in the upper right corner of the Start screen.• If your clock was previously shown in the display, it will now be hidden from view.Change the time formatYou can set the time format for am/pm or 24 hour format (military time).1At the Start screen, press Menu 5-2-1 (Settings - Time and date settings - Clock). After a brief pause, Show clock (or Hide clock) Set the time, and Time format appear in the display with Show clock (or Hide clock) highlighted.2Scroll to Time format and press Select.3Scroll to 24-hour or am/pm and press Select. A message appears in the display confirming your selection.Set the date1At the Start screen, press Menu 5-2-2 (Settings - Time and date settings - Date). After a brief pause, a list of options appears in the display.2Scroll to Set the date and press Select.3Enter the date and press OK. The date is set.Set or change the date format1At the Start screen, press Menu 5-2-2 (Settings - Time and date settings - Date). 2Scroll to Date format and press Select. 3Scroll to the format of your choice and press Select.4Scroll to the date separator of your choice (period, slash, hyphen, or space) and press Select. A message appears in the display confirming your selection.

[ 112 ] • CALL SETTINGSCall forwardingCall forwarding tells your network to redirect incoming calls to another number.Note: Call forwarding is network-dependent and may not work the same in all networks. Contact your wireless provider for availability.ACTIVATE CALL FORWARDINGNote: This is a network-dependent feature. All options listed in the following table may not appear in the display. Contact your wireless provider for more information.1At the Start screen, press Menu 5-3-1 (Settings - Call settings - Call forwarding).2After a brief pause, the forwarding options listed in the following table appear in the display.Forward all voice callsForward all calls to the number you specifyForward if busy Forward incoming calls when you are in a callForward if not answeredForward incoming calls to another number if you are unable to answer. You can also set a delay before forwarding takes placeForward if out of reachForward incoming calls when your phone is offForward when not able to take callsForward calls that are not picked up. You can also set a delay before forwarding takes placeForward all fax calls Forward all fax calls to a fax mailboxForward all data calls Forward all data calls to a data mailboxCancel all call forwardingCancel any call forwarding options you may have set

[ 113 ]Menu functions3Scroll to the option of your choice and press Select.4Scroll to Activate and press Select.5Scroll to the destination to which your calls will be forwarded (such as To other no.) and press Select.6Enter the number to which your calls, data, or other information will be forwarded and press OK.Your phone calls the network to activate the feature you have requested. The network sends a confirmation note when the feature has been activated successfully.CANCEL CALL FORWARDING• At the Start screen, press Menu 4-2-1-8 (Settings - Call settings - Call forwarding - Cancel all call forwarding).Note: Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your wireless provider for specific details.Anykey answerAnykey answer allows you to answer an incoming call by briefly pressing any key except the power key, the Left selection key, the Right selection key, and the End key.1At the Start screen, press Menu 4-2-2 (Settings - Call settings - Anykey answer). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select.Automatic redialOccasionally, your network may experience heavy traffic, resulting in a “fast” busy signal when you dial. With automatic redial activated, your phone redials the number up to 10 times, and notifies you once the network becomes available.ACTIVATE OR DEACTIVATE AUTOMATIC REDIAL1At the Start screen, press Menu 5-3-3 (Settings - Call settings - Automatic redial). After a brief pause, On and Off appear in the display.

[ 114 ]2Scroll to your choice and press Select.1-touch dialingYou can turn the 1-touch dialing feature on and off. For more information, please see “1-touch dialing” on page 99.Call waitingIf supported by your wireless provider, call waiting notifies you of an incoming call even while you are in a call. You can then accept, reject, or ignore the incoming call.ACTIVATE CALL WAITING1Press Menu, scroll to Settings, and press Select.2Scroll to Call settings and press Select. 3Scroll to Call waiting and press Select.4Scroll to Activate and press Select.USE CALL WAITING• During a call, press the Talk key to answer the waiting call. The first call is put on hold. • Press the End key to end the active call.Activate/deactivate summary after callYour phone can display the time spent on a call when you hang up. TURN ON SUMMARY AFTER CALL1At the Start screen, press Menu 5-3-6 (Settings - Call settings - Summary after call). After a brief pause, On and Off appear in the display. 2Scroll to On and press Select.TURN OFF SUMMARY AFTER CALL1At the Start screen, press Menu 5-3-6 (Settings - Call settings - Summary after call). After a brief pause, On and Off appear in the display.

[ 115 ]Menu functions2Scroll to Off and press Select.Send my caller identity with next callYou can prevent your number from being displayed on the receiving party’s caller ID. This feature is network-dependent and works on a call-by-call basis. Contact your wireless provider for more information.1At the Start screen, press Menu 4-2-7 (Settings - Call settings - Send my caller identity). After a brief pause, Default, Yes, and No appear in the display.2Scroll to the selection of your choice and press Select. A message appears in the display confirming your selection.Select a line for outgoing callsNote: This is a network-dependent feature. Check with your wireless provider for availability and a description of the feature.1At the Start screen, press Menu 4-2-8 (Settings - Call settings - Line for outgoing calls). After a brief pause, Line 1 and Line 2 appear in the display.Important: If you select Line 2 and have not subscribed to this network service, you will not be able to place calls. However, calls on both lines can be answered regardless of the selected line.2Scroll to Line 1 or Line 2 and press Select. A message appears in the display confirming your selection.Tip: If supported by your SIM card, you can prevent the line selection by using the Lock option. • PHONE SETTINGSSet the display language1At the Start screen, press Menu 4-3-1 (Settings - Phone settings - Language).After a brief pause, Automatic, English, Português, Español, and

[ 116 ]Français appear in the display.2Scroll to the language of your choice and press Select.Note: The Language setting affects the time and date formats of the Clock, Alarm clock, and Calendar.ACTIVATE OR DEACTIVATE AUTOMATIC KEYGUARDImportant: When keyguard is on, it may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press the Talk key. The number is displayed only after you have keyed in its last digit.You can set the keypad of your phone to lock automatically after a preset time delay (from 10 seconds to 60 minutes). When the preset delay expires, the keypad locks automatically.1At the Start screen, press Menu 5-4-3 (Settings - Phone settings - Automatic keyguard). After a brief pause, On and Off appear in the display.2Scroll to On (or Off to deactivate) and press Select. 3If you selected On, Set delay appears in the display. 4Enter the delay (in minutes and seconds) and press OK.Cell info displayNote: Cell info display is network-dependent and may not work the same in all networks. Contact your wireless provider for availability.When this function is selected, your phone will indicate when it is used in a system cell based on Micro- Cellular Network technology. MCN technology increases the capacity of wireless networks in urban areas. The setting will remain in effect even if the SIM card is changed or the phone is switched off.1Press Menu 5-4-4 (Settings - Phone settings - Cell info display). After a brief pause, On and Off appear in the display.2Scroll to On (or Off) and press Select. A message appears in the

[ 117 ]Menu functionsdisplay confirming your selection.Note: If the GPRS connection is set to Always online, info messages may not be received. In that case, set the GPRS connection to When needed, see “GPRS, HSCSD, CSD” on page 167 for more information.Welcome noteYou can write a welcome note which shows up briefly on your display whenever you power up your phone.Note: Predictive text input is unavailable for entering Welcome note text.1At the Start screen, press Menu 5-4-5 (Settings - Phone settings - Welcome note). After a brief pause, the message edit screen appears in the display awaiting text input.2Enter a note (up to 44 characters). • Press the Star key to display and select from available special characters. For more information on special characters, “Enter punctuation and special characters” on page 51.3When you are finished, press Options, scroll to Save, and press Select.Scroll to Delete and press Select if you want to delete the previous text and begin writing another note.System selectionYou may be able to manually search for another network which has a roaming agreement with your home wireless provider.1At the Start screen, press Menu 4-3-5 (Settings - Phone settings - System selection). After a brief pause, Automatic and Manual appear in the display.

[ 118 ]2Scroll to Automatic or Manual and press Select.Note: If No system access appears in the display, you’ll need to switch to Automatic mode, or insert another SIM card into the phone.Confirm SIM service actionsThis option allows you to request notification when your service provider makes changes to SIM-related services (such as activating GPRS service).1Press Menu 5-4-7 (Settings - Phone settings - Confirm SIM service actions). After a brief pause, Yes and No appear in the display.2Scroll to the selection of your choice and press Select. A message appears in the display confirming your selection.Help textYour phone displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 10 seconds. Use the scroll keys to page through the full help text, if necessary.ACTIVATE/DEACTIVATE HELP TEXTThe default setting for Help text is On. However, you can turn help text on or off by doing the following from the Start screen.1Press Menu 5-4-8 (Settings - Phone settings - Help text activation). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select. A message appears in the display confirming your selection.Option FunctionAutomatic Your phone defaults to those settings which have been preset by your wireless providerManual Your phone searches for a network which has a roaming agreement with your wireless provider

[ 119 ]Menu functionsYou can set your phone to play (or not to play) a start-up tone when the phone is switched on.1At the Start screen, press Menu 5-4-9 (Settings - Phone settings - Start-up tone). After a brief pause, On and Off appear in the display.2Scroll to your choice and press Select. A message appears in the display confirming your selection. • DISPLAY SETTINGSWallpaperYou can set your phone to display a background picture (wallpaper) on the Start screen. Some pictures are pre-saved in the Gallery menu. You can also receive pictures via multimedia message, download them from web browser pages or transfer them with PC Suite from your PC and then save them in the Gallery. Your phone supports JPEG, GIF, BMP, PNG, and WBMP formats.SELECT WALLPAPER1Press Menu 5-5-1 (Settings - Display settings - Wallpaper). After a brief pause, On, Off, and Change image appear in the display.2Scroll to Change image and press Select to browse the gallery for another image. 3Use the scroll keys (the Scroll up keythe Scroll down key) to browse the image gallery. When you arrive at the image of your choice, press Options, scroll to Set as wallpaper, and press Select.4If Replace current wallpaper? appears in the display, press OK. A message appears in the display confirming your selection.ACTIVATE/DEACTIVATE WALLPAPER1Press Menu 5-5-1 (Settings - Display settings - Wallpaper). After a brief pause, On, Off, and Change image appear in the display.2Scroll to On or Off and press Select.

[ 120 ]Color schemesYou can change the color of some display components in your phone, such as indicators and signal bars.1At the Start screen, press Menu 5-5-2 (Settings - Display settings - Color Schemes). After a brief pause, a list of color schemes appear in the display.2Scroll to the color scheme of your choice and press Select. A message appears in the display confirming your selection.Screen saverThe screen saver is activated when no function of the phone is used after a preset period of time. Press any key to deactivate the screen saver. The screen saver is also deactivated when the phone is out of the network coverage area.You can set your phone to display a screen saver after a preset time or after a custom time (up to 60 minutes) of your choosing.1At the Start screen, press Menu 5-5-3 (Settings - Display settings - Screen saver timeout). After a brief pause, 2 minutes, 5 minutes, and Other appear in the display.2Scroll to 2 minutes or 5 minutes and press Select. 3If you want to set a custom time (up to 60 minutes), scroll to Other and press Select. Enter the custom time and press OK. A message appears in the display confirming your selection.Display brightnessYou can change the brightness of your phone’s display.1Press Menu 4-4-5 (Settings - Display settings - Display brightness). After a brief pause, a bar chart appears in the display indicating the current brightness level.2Use the left and right scroll keys (the Left selection key and the Right selection key) or the side volume keys to adjust the contrast level to your preference.

[ 123 ]Menu functionsRadio (Menu 6)To listen to the FM radio on your phone connect the DT-1 music stand, HDS-3 stereo headset, HDB-4 boom headset to the connector on the bottom of the phone. The leads of the headset function as the antenna, so let it hang freely.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Note: The quality of a radio broadcast depends on coverage of the radio station in that particular area. • TURN THE RADIO ON AND OFF• At the Start screen, press Menu 6 (Radio). • To turn off the radio, press and hold the End key. • USE THE RADIONote: When you place or receive a call, the radio automatically mutes. Once the call is ended, the radio automatically switches back on.With the radio on, press Options to choose from the options listed in the following table. Press the Scroll up key or the Scroll down key to scroll to an option. Press Select to activate the option or enter its submenu.Option FunctionTurn off Turn off the radioSave channel Save the current station to one of 20 locationsAutomatic tuningBriefly press either scroll key to start the channel search up or down. Press OK when a channel is found.

[ 124 ]Tip: To set the radio frequency, press the Star key with the radio on.Tip: To tune the radio manually, press the Pound key with the radio on.Note: When an application using a GPRS connection is sending or receiving data, it may interfere with the radio. • SAVE A RADIO CHANNELYou can save a preset station to any one of 20 locations in memory, and then tune to that station by simply pressing the Scroll up key or the Scroll down key with the radio on.1With the radio on, press and hold the Scroll up key or the Scroll down key to start the channel search. Searching stops when a channel is found. 2To save the channel, press Options, scroll to Save channel, and press Select.3Enter a name for the channel and press OK. 4Next, scroll to an (empty) location to save the channel and press Select.Manual tuning Press the Scroll up key or the Scroll down key to search in increments of 0.1 MhzSet frequency Manually enter the frequency of a known radio stationDelete channelDelete a saved channelLoudspeaker Listen to the radio through the speakerphoneMono output/Stereo outputListen to the radio in monaural mode. If already in manual mode, Stereo output appears in the displayOption Function

[ 125 ]Menu functionsTip: To quickly save an FM station to a memory location from 1 to 9, press and hold the corresponding number key while the radio is playing. Then, enter the name of the channel and press OK.

[ 126 ]Camera (Menu 7)In this menu you can take photos with the phone’s built-in camera and adjust its settings. The camera lens is on the back of the phone, and the display of the phone works as a viewfinder. The camera produces JPEG images.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Note: This feature uses shared memory. Please see “Shared memory” on page 24 for more information.If there is not enough memory to take a new photo, you need to free some by deleting old photos or other files in the gallery.Note: Obey all laws governing the taking of pictures. Do not use this feature illegally. • CAMERA SETTINGS• At the Start screen, press Menu 8 (Camera), then select Settings. After a brief pause, the submenus in the following table appear in the display.Option FunctionImage quality Defines how much the photo file will be compressed when saving the image. Select High, Normal, or Basic. High provides the best image quality but takes more memory.Camera sounds Sets the shutter sound and the self timer tone to On or Off.

[ 127 ]Menu functions • TAKE A PHOTO1Press Menu, and select Camera and Standard photo or Portrait photo.Tip:To open the camera viewfinder quickly with standard photo view, press the Scroll up key at the Start screen.2The live image appears on the display, and you can use the display as a viewfinder.3To take a photo, press Capture. When taking a photo, a shutter sound is heard. The phone saves the photo in the Photos folder of the Gallery menu. The saved photo will be shown on the display.4Select Back to take another photo, or press Options and select, for example, an option to delete or rename the saved photo, send it as a multimedia message, or access the gallery. Tip:To activate the self timer of the camera, press Menu, and select Camera, Self-timer, and Standard photo or Portrait photo. Press Start, and after the timeout, the camera takes the photo and saves it in the Gallery menu. While the self timer is running, a beeping sound is heard. Default title Defines the title that will be used when saving a photo. If you select Automatic, the default title will be used, or if you select My title, you can key in or edit a new title. Option Function

[ 128 ]Gallery (Menu 8)You can save pictures and ringing tones to folders in the gallery, or create folders of your own and save them there. You can download images and tones via MMS, web sites, or Nokia PC Suite.Note: This feature uses shared memory. Please see “Shared memory” on page 24 for more information.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. • OPEN THE GALLERYAt the Start screen, press Menu 8 (Gallery). After a brief pause, the submenus in the following table appear in the display.Note: The phone tries to connect to the Internet using your web browser and the currently active set of gallery downloads. If the connection fails, you may need to activate another set or change the current settings. See “Set up for browsing” on page 172 for more information.Option FunctionView folders Explore the folders in the gallery menu. See “View folders” in the following section for more infoDelete folder Delete a folder you have createdRename folder Rename a folder you have createdAdd folder Add a folder of your ownGallery downloads Use the image and tone downloads in your phone; see the following for more information

[ 130 ]Organizer (Menu 9)Your phone has many useful features for organizing your everyday life, including an alarm clock, a calendar and a to-do list.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. • ALARM CLOCKThe alarm clock is based on your phone’s internal clock. It sounds an alert any time you specify and even works if the phone is off.IF AN ALARM HAS NOT BEEN SET1At the Start screen, press Menu 9-1 (Organizer - Alarm clock). After a brief pause, you are prompted to enter a time for the alarm.2Enter the time for the alarm in hh:mm format and press OK. 3Scroll to am or pm and press Select. Alarm on appears briefly in the display and appears on the Start screen.IF AN ALARM HAS PREVIOUSLY BEEN SET1At the Start screen, press Menu 9-1 (Organizer - Alarm clock). After a brief pause, On and Off appear in the display.2Scroll to On and press Select. You are prompted to set the alarm time.3Enter the time for the alarm in hh:mm format and press OK. 4Scroll to am or pm and press Select. Alarm on appears briefly in the display and appears on the Start screen.

[ 131 ]Menu functionsWhen the alarm soundsYour phone beeps, vibrates, and the display lights up. Stop and Snooze appear in the bottom of the display.WITH THE PHONE ONPress Stop to shut the alarm off.OR Press Snooze. The alarm stops for 10 minutes and Snoozing appears in the display.Note: If you do not press a key, the alarms stops (snoozes) for 5 minutes, and then sounds again.WITH THE PHONE OFF1The alarm sounds. If you press Stop the following appears in the display:Switch the phone on?Note: The phone will only power up if you select Yes when Switch the phone on? appears in the display.2Press Yes to power up the phone. Press No to keep it switched off.Warning: Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Turn off an alarm that has been set1At the Start screen, press Menu 9-1 (Organizer - Alarm clock). After a brief pause, On and Off appear in the display.2Scroll to Off and press Select. Alarm off appears briefly in the display. • CALENDARThe calendar keeps track of reminders, calls you need to make, meetings, and birthdays. It can even sound an alarm for any of these events.Note: This feature uses shared memory. Please see “Shared memory” on page 24 for more information.

[ 132 ]OPEN THE CALENDARAt the Start screen, press Menu 9-2 (Organizer - Calendar). After a brief pause, the Monthly view appears in the display with the current date highlighted by a black box.Tip:To open the Calendar quickly, press the Right selection key at the Start screen.USE FOUR-WAY SCROLLING You can move the cursor in some calendar views by using the four-way scroll keys like a joystick. Please see “Understand the terms” on page 16.Monthly viewMonthly view provides an overview of the selected month and weeks. It also allows you to jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder.Go to a date1Press Menu 9-2 (Organizer - Calendar). After a brief pause, the monthly view appears in the display.2Press Options, scroll to Go to date, and press Select.3Enter the date (for example 12/15/2002) and press OK. The monthly view appears in the display with the “jump date” highlighted.Make a note for a specific dateYou can choose from five types of notes; Meeting, Call, Birthday, Memo, and Reminder. Your phone asks for further information depending on which note you choose. You also have the option to set an alarm for any note that you select.Note: This feature uses shared memory. Please see “Shared memory” on page 24 for more information.Monthly view

[ 133 ]Menu functions1Go to the date for which you want to set a reminder. See “Go to a date” in the previous section if you need more information. 2From the monthly view (with the go to date highlighted), press Options.3Scroll to Make a note, and press Select.4Scroll to one of the following note types and press Select5Enter your note, press Options, scroll to Save, and then press Select.•For a Meeting note, you are prompted to enter a subject, location, and then a start/end time. You are then given the option to set an alarm.•For a Call note, you are prompted to enter a phone number, a name, and the time. You are then given the option to set an alarm.•For a Birthday note, you are prompted to enter the person’s name, and year of birth. You are then given the option to set an alarm.•For a Memo note, you are prompted to enter a subject and then an end date. You are then given the option to set an alarm.•For a Reminder note, you are prompted to enter the subject you wish to be reminded about, you are then given the option to set an alarm.View calendar notes - the Day viewAfter you have created some calendar notes, you can view them as follows:1At the Start screen, press Menu 9-2 (Organizer - Calendar).After a brief pause, the monthly view appears in the display with the current date highlighted. Any dates that contain calendar notes will be in bold font.2Use four-way scrolling to go to the date containing the note.3Press Options, scroll to View day, and press Select. Any notes you have for the day will appear in a list format. Meeting Call Birthday Memo Reminder

[ 134 ]4To view the body of a highlighted note, press Options, scroll to View and press Select.Options while viewing a list of notes1Press Options while viewing a day’s notes to display those options listed in the following table.2Scroll to an option. Press Select to activate the option or to enter its submenu.*Indicates an option that is available only while viewing the body of a note (not the header).Calendar note optionsView View the full noteMake a note Make another note for the selected date*Delete Delete the note*Edit Edit the note*Move Move the note to another date on your calendar*Repeat Enable the note to recur on a regular basis (daily, weekly, bi-weekly, monthly, and yearly)Go to date Jump to another date on your calendar*Send note Send the note to another device via Infrared or as a text message or in vCal format*Copy Copy the note. You can then “paste” the note to another date*SettingsSet the date and time, date and time format, the day each week starts, and whether you want your notes to auto-delete after a specified timeGo to to-do listTakes you to the to-do list for today’s date

[ 135 ]Menu functionsSend a Calendar note to another deviceSEND A NOTE VIA INFRARED OR TEXT MESSAGENote: If sending via IR (infrared), ensure the other device is set to receive data via IR. For more information on enabling the receiving device’s IR, refer to the user guide for the receiving device.1At the Start screen, press Menu 9-2 (Organizer - Calendar). After a brief pause, the monthly view appears in the display. 2Jump, or scroll to the date containing the note you wish to send. Tip: Any days containing notes will be in bold font.3Press Options, scroll to View day, and press Select. 4Scroll to the note you wish to send and press Options.5Scroll to Send note and press Select.6Scroll to Via Infrared, As note, or As text message, and press Select.7If you selected Via Infrared, align the infrared ports of both devices and press Select. The note is sent.8If you selected As note, enter the number for the recipient (or press Find to retrieve a number from your Phone book), and press OK. The note is sent.If you selected As text message, the note appears in the display. 9Press Options, scroll to Send, and press Select.10 Enter the number for the recipient (or press Find to retrieve a number from your Phone book), and press OK. The note is sent.RECEIVE CALENDAR NOTES FROM ANOTHER DEVICEWhen you receive a Calendar note, your phone displays Calendar note received. You can then save the note in your Calendar and set an alarm for any date and time.

[ 136 ]VIEW RECEIVED CALENDAR NOTES1When your phone displays Calendar note received, press Show.2The text of your note appears in the display. Use the scroll keys to view the entire message, if necessary.SAVE RECEIVED CALENDAR NOTES1After viewing the Calendar note, press Options.2Scroll to Save and press Select.DISCARD VIEWED CALENDAR NOTES1After viewing the Calendar note, press Options.2Scroll to Discard and press Select. • MAKE A TO-DO LISTNote: This feature uses shared memory. Please see “Shared memory” on page 24 for more information.You can keep track of your tasks with the to-do list feature. You may be able to save up to 30 notes, depending on their length.Note: To-do notes are not related to specific dates.Add a to-do note1At the Start screen, press Menu 9-3 (Organizer - To-do list).2After a brief pause, press Options. If this is your first time to use the to-do list, Add is highlighted. You can also go to the Calendar.3Press Select, enter your to-do note and press Options.4Scroll to Save and press Select.5Scroll to High, Medium, or Low priority and press Select. The to-do note is saved.Options while viewing notesPress Options while viewing the header or body of a particular note and the following options appear in the display.Header view Option Body view Option

[ 137 ]Menu functionsView View the body of a note Edit Edit the content of a noteAdd Add another note Set deadlineSet a deadline for the noteDelete Delete the note Mark note as doneMark a note or task as complete; no more reminders will followSort by deadlineSort the notes according to their deadlineDelete Delete the noteSend Send the note as a text messageEdit priorityChange the priority to high, medium, or lowGo to calendarLeave the to-do list and go to the calendarSend Send the note as a text message Save to calendarSave the to-do note to a date on your calendarGo to calendarLeave the to-do list and go to the calendarN/A N/A Save to calendarSave the to-do note to a date on your calendar

[ 138 ]Games (Menu 10)Challenge yourself or a friend to one of the two fun games in your phone: Bounce and Triple Pop!Note: Your phone must be switched on to use this function. Donot switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. 1At the Start screen, press Menu 10 (Games). After a brief pause, the list of game submenus in the following table appear in the display.2Scroll to a submenu. Press Select to enter the submenu and choose other settings.Note: Some menus listed in the following table are network-dependent. Contact your wireless provider for more information.Use the Game downloads menu• At the Start screen, press Menu 10-2 (Games - Game downloads). After a brief pause, your phone connects to the web pages using the currently active set of web browser settings.Submenu FunctionSelect game Select a game or enter a game’s option list. See “Game options” on page 139 for more info on game optionsGame downloadsConnect to game downloads on the Internet using your web browserMemory Check the available memory for games and game related applicationsSettings Turn game sounds, lights, and shakes on or off

[ 139 ]Menu functionsNote: If the connection fails, you may enter the Services menu and activate another set of service settings. See “Use browser options” on page 173 for more info on browser settings. • LAUNCH A GAME1Press Menu 9-1 (Games - Select game). After a brief pause, a list of games appears in the display.2Scroll to a game and press the Talk key. If the selection is a single game it will launch. Otherwise, a list of games within the selected game set appears in the display. To launch a single game, scroll to the desired game and press the Talk key.Tip: If a game uses the whole display area, selection keys such as Options or Back will not appear in the display. Press the Left selection key or the Right selection key to show the options keys Select or Back (returns to the game).Game options• While viewing the games list, press Options to display those listed in the following table. Scroll to an option and press Select to activate the option or enter its submenu.Option FunctionOpen Play the gameDelete Delete the gameWeb access Options for restricting network accessCheck version Display the version of the highlighted gameDetails Display details of the game

[ 140 ] • GAMESBounceGuide the ball past many obstacles to pass through all the hoops and open the door to the next level. Use key 4 to move the ball left, key 6 to move the ball right, and key 2 to bounce the ball. Watch out for spikes! Use deflators to shrink the ball and inflators to return to normal size. Large balls float in water, small balls do not. Collect crystals for extra points and to store your game position. Collect crystal balls to give your ball an extra life. Jump and speed boosts temporarily boost your powers while rubber floors give you extra bounce. Triple PopYou are in control of a circular heap of bubbles which has a black stone at its center. During the game, bubbles appear from all around, moving towards the center and sticking to the heap. The heap can be rotated by using keys 1 and 3. The heap grows until it crosses the circular boundary at which point the game is over.There are four different colors of bubbles. Chains of three or more bubbles of the same color pop and vanish. Each popped bubble is worth five points. Watch out for white bubbles later on in the game! White bubbles will not pop if you line up three or more of them, but they will burst if bubbles of another color pop next to them. Bubbles stuck in the heap for too long will turn to stone. Stone bubbles cannot be popped with anything except a special bonus bubble. The bonus bubble gauge is filled by popping long chains of bubbles. The longer the chain, the bigger the bonus. There are four different bonus bubbles that can be launched by pressing key 2. The first bonus bubble pops bubbles adjacent to where it hits the heap. The second bonus bubble pops a ring of bubbles around the heap at the level it hits. The third bonus bubble pops bubbles from where it hits to the center stone. The last bonus bubble pops all bubbles in and above the ring that it hits.

[ 141 ]Menu functionsApplications(Menu 11)You will find useful JavaTM utilities pre-installed on your phone. Also, you can manage and download new applications that may be offered by your wireless provider. The phone must be switched on to use this function. Do not switch on the phone when the use of a wireless phone is prohibited or when it may cause interference or danger.Note: This feature uses shared memory. Please see “Shared memory” on page 24 for more information.Note: For currency conversion, please see “Use the currency converter” on page 146 for more information. • LAUNCH AN APPLICATION1At the Start screen, press Menu 11 -1 (Applications - Select application). After a brief pause, one or more applications appear in the display.2Scroll to an application or an application set and press Options, or press the Talk key.3If the selection is a single application it will be launched. Otherwise, a list of applications in the selected application set is displayed. • To launch a single application within the set, scroll to the desired application and press Options, then press Select or the Talk key.

[ 142 ] • APPLICATION OPTIONSNote: An application may require a few seconds to load. When you open an application, please wait for the launch screen to disappear. At that point, the application is ready. • DOWNLOAD APPLICATIONSYou can download new JavaTM applications in different ways.Use Application downloads1At the Start screen, press Menu 11-2 (Applications - App. downloads). After a brief pause, the list of available web browser bookmarks appears in the display.Note: This feature is network-dependent. Contact your wireless provider for more information.Option FunctionOpen Opens the selected application or application setDelete Delete the application or application set from your phone.Web access Provides options for restricting network access Ask first (ask for net access)Allowed (allow net access)Not allowed (to not allow net access)Check version Check if a new version of the application is available for downloadWeb page Provides further information or data for the application from an Internet page; this feature is network-dependent and only appears if an Internet address has been provided with the applicationDetails Shows additional information about the application

[ 143 ]Menu functions• Scroll to More bookmarks (if necessary) and press Select to access the list of web browser bookmarks in your Services menu.2Scroll to the appropriate bookmark that contains the application you wish to download, and press Select to connect to the web page. See “Navigate the wireless Internet” on page 173 for information on browsing web pages.Note: If the connection fails, you may enter the Services menu and activate another set of service settings. See “Use browser options” on page 173 for more info on browser settings.Use PC SuiteUse the JavaTM Application installer from PC Suite to download the applications in your phone. Note: Nokia does not warrant for applications from non-Nokia sites. If you choose to download Java applications from non-Nokia sites, take precautions for security or content.Note: When you download a game or an application, it may be saved in the Games menu instead of the Applications menu.Memory status for applicationsYou can view the size of memory available for game and application installations.At the Start screen, press Menu 11-3 (Applications - Memory). After a brief pause, the amount of free memory appears in the display. • CONVERTER IIThis application converts many common unit types. • Switch the conversion direction with the Scroll up key and the Scroll down key. • Press the Star key for the minus (-) sign. Press the Pound key for the decimal point.

[ 144 ]• Change the type of unit conversion, or create new conversion types, with the Configure command.Option FunctionChange sign Toggles the value of the unit from positive (+) to negative (-) and vice versa.Instructions Displays instructions for use.Configure Provides options for unit conversion.Set conv. Sets a unit conversion to a certain state that will always occur when you enter the application:• Temperature (Fahrenheit, Celsius, Kelvin).• Currency (Dollar (USD), Euro (EUR), Pound (GBP), Swiss franc (CHF), Yen (JPY)).• Weight (Ounce, pound, carat, Troy oz., Stone, gram, kilo).• Length (Inch, foot, yard, mile, Nautical mile, mm, cm, meter, km).• Area (square inch, foot, yard, mile, cm, meter, km, and Hectare, Acre).• Volume (cubic inch, foot, yard, cm, meter).• Other (create a new conversion type).Reverse conv. Toggles the unit conversion.Clear all Resets the application.

[ 145 ]Menu functionsExtras (Menu 12)Extras include a calculator with currenc y exchange rate converter, countdown timer, stopwatch, mobile wallet, synchronize tool, voice recorder, and voice commands. Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger. • CALCULATORThe calculator in your phone adds, subtracts, multiplies, divides, counts the square and the square root and converts currency values.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Note: Calculator has a limited accuracy and rounding errors may occur, especially in long division.1Press Menu 12-1 (Extras - Calculator). After a brief pause, the calculator screen appears in the display.2Enter the first number in the calculation. Press the Pound key for a decimal point if necessary.3Press the Star key to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the displayed character.Note: To perform a square or square root calculation, press Options, scroll to Square or Square root and press Select. 4Enter the second number in your calculation.5Press Options. Equals is highlighted. Press Select. The sum of your

[ 146 ]calculation appears in the display.Use the currency converterYou can convert foreign currency to domestic, or vice versa directly from the Start screen.1At the Start screen, enter a currency amount to convert.2Press Options, scroll to one of the following and press Select:If you have not done so already, you are prompted to enter the exchange rate.3Enter the exchange rate and press OK. Press the Pound key to insert a decimal. The converted amount appears in the display.Edit the exchange rate1At the Start screen, press Menu 12-1 (Extras > Calculator). After a brief pause, the calculator screen appears in the display.2Press Options (Exchange rate is highlighted), then press Select and scroll to highlight or display one of the following options:3Press Select to edit your choice. 4Enter the exchange rate and press OK. The exchange rate is saved.To home Converts foreign currency to domestic currencyTo foreign Converts domestic currency to foreign currencyForeign units in home units Enter the number of home units it takes to make one unit of foreign currencyHome units in foreign units Enter the number of foreign units it takes to make one unit of your home currency

[ 147 ]Menu functions • COUNTDOWN TIMER The countdown timer is like an egg-timer or the timer on your microwave oven. You can enter a specified time (up to 99 hours and 59 minutes), and when the time runs out, your phone sounds an alarm.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Note: The countdown timer only works when the phone is on. Once you turn off your phone, the timer is no longer active.Set the countdown timer1At the Start screen, press Menu 12-2 (Extras - Countdown timer).2After a brief pause, you are prompted to enter the time. Enter 2 digits for hours, 2 digits for minutes, then press OK.3Enter a note for the timer, then press OK. The timer begins running.CHANGE THE TIMEAfter you have set the timer, you can change the time. 1At the Start screen, press Menu 12-2 (Extras - Countdown timer).After a brief pause, Change time and Stop timer appear in the display.2Scroll to Change time and press Select.3Enter the new time and press OK.4Leave the note as it was, or enter a new note and press OK. The timer begins running.WHEN THE ALARM SOUNDSWhen the time runs out, your phone sounds an alarm, displays the timer note, and flashes its lights. • Press any key during the alarm to stop the timer. • After 30 seconds the timer alert expires automatically.

$[ 148 ]STOP THE TIMER BEFORE THE ALARM SOUNDS1At the Start screen, press Menu 12-2 (Extras - Countdown timer).After a brief pause, Change time and Stop timer appear in the display.2Scroll to Stop timer and press Select. Timer stopped appears in the display. • STOPWATCHYour phone has a stopwatch that can be used to track time at sporting events or other occasions. The stopwatch displays time in hours, minutes, seconds and fractions of a second. 00:00:00:0Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Note about stopwatch operationUsing the stopwatch consumes the battery and the phone's operating time will be reduced. Be careful not to let it run in the background when performing other operations with your phone. If you press the End key and return to the Start screen, the clock continues to run in the background and the icon appears in the upper left corner of the screen.To return to the Stopwatch screen, take the following steps:1Press Menu 12-3 (Extras - Stopwatch). After a brief pause, a list of options appear in the display.2Scroll to Continue and press Select.• To stop the clock, press Stop.Measure time1Press Menu 12-3 (Extras - Stopwatch). After a brief pause, a list of options appear in the display.2Scroll to Split timing and press Select.$

Microsoft NHL-4J GSM PCS 1900 Cellular Telephone User Manual en7250ug

Microsoft Mobile Oy GSM PCS 1900 Cellular Telephone en7250ug

Users Manual

Navigation menu

Namespaces

Views

Navigation