Microsoft NHM-10 Dual Band Bluetooth Enabled Imaging Phone User Manual Draft Manual

Microsoft Mobile Oy Dual Band Bluetooth Enabled Imaging Phone Draft Manual

UserManual.wiki >

Microsoft >

NHM 10 User Manual

Draft Manual

The wireless phones described in this guide are approved for use in the GSM network.LEGAL INFORMATIONPart No. 9356743, Issue No. 1a 1 1Copyright ©2003 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nokia 3600, Nokia 3650, and the Nokia Original Accessories logos are trademarks or registered trademarks of Nokia Corporation. All other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Printed in Canada May 2003US Patent No 5818437 and other pending patents.T9 text input software Copyright ©1999-2003. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security.Java is a trademark of Sun Microsystems, Inc.Bluetooth is a registered trademark of Bluetooth SIG, Inc.The information in this user guide was written for the Nokia 3600 and Nokia 3650 phones. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLSThis product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited.FCC/INDUSTRY CANADA NOTICEYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. This device contains a radio transceiver and digital circuitry that supports its features. Operation of the digital device circuitry is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications to this device not authorized by Nokia may void the authority granted for operation of this device and should not be made.

[ iii ]Contents1 For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 General information . . . . . . . . . . . . . . . . . . . . . . . . . 5Register your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Understand your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Options lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Navigation bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Actions common to all applications . . . . . . . . . . . . . . . . . . . . . . 16Volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Shared memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Access alternate formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193 Your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Make a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Answer a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Log - Call log and general log . . . . . . . . . . . . . . . . . . . . . . . . . . . 25SIM folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 304 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Change general settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Connection settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Access points. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

[ iv ]Date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Call restriction (system service). . . . . . . . . . . . . . . . . . . . . . . . . . 47System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Accessory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 485 Contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Create contact cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Copy between SIM card and phone memory . . . . . . . . . . . . . . . 49Edit contact cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50View a contact card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Manage contact groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55Import data from other Nokia phones . . . . . . . . . . . . . . . . . . . . 566 Camera and images . . . . . . . . . . . . . . . . . . . . . . . . 57Take pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57Store pictures in images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 617 Video recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Record a video clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Watch a video clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 668 RealOne Player™. . . . . . . . . . . . . . . . . . . . . . . . . . . 67Play media files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Send media files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Change the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 699 Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Messaging - General information . . . . . . . . . . . . . . . . . . . . . . . . 73

[ vi ]13 Extras. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114Composer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Converter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119Memory card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11914 Services (XHTML) . . . . . . . . . . . . . . . . . . . . . . . . . 122Basic steps for accessing the web. . . . . . . . . . . . . . . . . . . . . . . 122Phone browser service settings . . . . . . . . . . . . . . . . . . . . . . . . . 123Browsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125View saved pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Download through the browser. . . . . . . . . . . . . . . . . . . . . . . . . 127End a connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Browser settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12915 Java™ Applications . . . . . . . . . . . . . . . . . . . . . . . . 130Install a Java application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Java application settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13216 Manager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133Install applications and software . . . . . . . . . . . . . . . . . . . . . . . 133Install software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134Remove software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135View memory consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

[ vii ]17 Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137Bluetooth connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137Infrared connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143Connect your phone to a computer . . . . . . . . . . . . . . . . . . . . . 144Use your phone as a modem . . . . . . . . . . . . . . . . . . . . . . . . . . . 14518 PC Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146Software and hardware requirements . . . . . . . . . . . . . . . . . . . 146Install PC Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147Connect your phone to the PC. . . . . . . . . . . . . . . . . . . . . . . . . . 148Start PC Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151Online and offline modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152Connection status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152Main window information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153PC Suite applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154Remove PC Suite from your PC . . . . . . . . . . . . . . . . . . . . . . . . . 15619 Reference information. . . . . . . . . . . . . . . . . . . . . . 158Battery statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158Use proper care and maintenance. . . . . . . . . . . . . . . . . . . . . . . 159Understand important safety information . . . . . . . . . . . . . . . . 160Certification information (SAR). . . . . . . . . . . . . . . . . . . . . . . . . 164Use accessories safely . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170Nokia 3600 technical information . . . . . . . . . . . . . . . . . . . . . . 172Nokia 3650 technical information . . . . . . . . . . . . . . . . . . . . . . 173Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174Frequently asked questions (FAQ) . . . . . . . . . . . . . . . . . . . . . . . 175

[ viii ]Message from the CTIA . . . . . . . . . . . . . . . . . . . . 185Message from the FDA . . . . . . . . . . . . . . . . . . . . . 189Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

[ 1 ]For your safety1 For your safetyRead these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this User guide.Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTDon’t use a hand-held phone while driving.INTERFERENCEAll wireless phones may get interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any regulations or rules. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTWireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELINGDon’t use the phone at a refuelling point. Don’t use near fuel or chemicals.SWITCH OFF NEAR BLASTINGDon’t use the phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.USE SENSIBLYUse only in the normal position. Don’t touch the antenna unnecessarily.

[ 2 ]QUALIFIED SERVICEOnly qualified personnel may install or repair phone equipment.ACCESSORIES AND BATTERIESUse only approved accessories and batteries. Do not connect incompatible products.WATER-RESISTANCEYour phone is not water-resistant. Keep it dry.BACKUP COPIESRemember to make backup copies of all important data.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user’s guide for detailed safety instructions. Do not connect incompatible products.CALLINGEnsure the phone is switched on and in service. Enter the phone number, including the area code, then press . To end a call, press . To answer a call, press .EMERGENCY CALLSEnsure the phone is switched on and in service. Press as many times as needed (e.g. to exit a call, to exit a menu, etc.) to clear the display. Enter the emergency number, then press . Give your location. Do not end the call until told to do so.

[ 4 ]Contact NokiaTo help Nokia promptly answer your questions, please have the following information available before contacting the Nokia Customer Care Center:• Your phone model number:Nokia 3600 (dual-band)Nokia 3650 (tri-band)• Type number•IMEI number• Your local zip code• The phone or accessory in questionNote: The model, type, and IMEI numbers are located on the back of your phone under the battery and memory card.Nokia Customer Care Center, USA Customer Care,CanadaNokia Mobile Phones7725 Woodland Center Blvd. Suite #150Tampa, Florida 33614Tel: 1-888-NOKIA-2U(1-888-665-4228)Fax: 1-813-249-9619For TTY/TDD users: 1-800-24-NOKIA(1-800-246-6542)Nokia Products Ltd.601 Westney Road SouthAjax, Ontario L1S 4N7Tel: 1-888-22-NOKIA (1-888-226-6542)Website: www.nokia.ca

[ 6 ]1Open the cover with the back of the phone facing you. Press the locking catch (1) in the direction of the arrow and slide the cover (2).2Remove the battery and find the SIM card slot (3). 3Place the SIM card carefully into the slot. Make sure that the beveled corner on the SIM card faces the bottom of the phone and that the golden contact area on the card faces downward.4Slide the silver catch over the SIM card tosecure it. (4). 5Replace the battery (5). Align the golden contacts of the battery with the corresponding connectors on the phone, and push the opposite end of the battery until it snaps into place. Replace the cover.Camera lens12345

[ 7 ]General informationCharge the battery1Connect the lead to the charger. You will hear it click into place.2Connect the charger to an AC wall outlet. 3Connect the lead from the charger to the base of the phone (6). The battery indicator bar starts scrolling. Note, that you can use the phone while charging.4When the battery is fully charged, the bar stops scrolling. Disconnect the charger from the AC outlet and then from the phone. See also “Battery statements” on p. 158 in the User Guide.Note: Remove the battery only when the phone is switched off.Switch the phone on or offPress and hold the power key located on top of the phone.Warning: Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.6

[ 8 ]AntennaYour phone has a built-in antenna (gray area in picture). As with any other radio transmitting device, do not touch the antenna unnecessarily when the phone is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Not touching the antenna area during a phone call optimizes the antenna performance and the talk time of your phone.PIN codeThe PIN code is usually supplied with the SIM card. If you are requested to enter a PIN code, Key in the code (displayed as ****) and press OK.Security codeIf you are requested to enter a security code, key in the security code (displayed as *****) and press OK.The factory setting for the security code is 12345. For more information on the access codes, see “Security” on p. 43.Time and dateUse the number keys to to key in the current time and then the date. Press OK to accept the settings.Use the Scroll keyPress the scroll key on the top , bottom , left and right (shown with blue arrows 1 to 4) to move in the Menu. Scroll to an application or a folder and press the scroll key in the middle (shown with blue arrow 5) to open it. For example:123 45

[ 9 ]General information1To open an Options list, press Options. The small arrow at the bottom of the display (1) indicates if the list contains more items. The lighter the arrow, the fewer the items left in the list.2To scroll down the Options list, press . A small arrow to the right (2) indicates a sublist. To open a sublist, press .To start an action, scroll to a command and press .3Press to go to a tab (3), a new page, or view in an application.Make a call1In standby mode, key in the phone number, including the area code. If you make a mistake, press to clear numbers.2Press and wait for the answer.3Press to finish the call (or to cancel the call attempt). Copy from a SIM card to phone memoryIf you have stored names and phone numbers on a SIM card, you can copy them to the phone memory.1Press to open the main Menu.2Use the scroll key to move to Contacts.3Press to open Contacts.4When you open Contacts for the first time, the phone asks you if you want to copy all your contact data from the SIM card to the phone memory. Press OK. See also “Copy between SIM card and phone memory” on p. 49.213

[ 13 ]General informationDATA CONNECTION INDICATORS• When an application is establishing a data connection, one of the indicators below blinks in standby mode. • When an indicator is shown continuously, the connection is active.Note: Check with your service provider for availability of high-speed data calls.ACCESSORY INDICATORSThe following icons indicate that an accessory is connected to your phone:Indicates that all calls to the phone are forwarded. Indicates that all calls to the phone are forwarded to a voice mailbox. See “Settings for call forwarding” on p. 24. If you have two phone lines, the forward indicator for the first line is and for the second line . See “Line in use (system service)” on p. 34.Indicates that you can make calls using phone line 2 only (system service). See “Line in use (system service)” on p. 34.for a data callfor a high-speed data callshown instead of the antenna symbol when there is an active GPRS connectionfor when the GPRS connection is put on hold during voice callsfor a fax callfor a Bluetooth connectionfor an infrared connectiona headset is connecteda loopset is connected

[ 14 ] •MENUPress (Menu key) to open the main Menu. In the Menu, you can access all the applications in your phone.Options in the Menu are: Open, List view / Grid view, Move, Move to folder, New folder, Help, and Exit.• Move in the Menu - Press the scroll key on the top , bottom , left and right (shown with blue arrows 1 to 4) to move in the Menu.• Open applications or folders - Scroll to an application or a folder and press the scroll key in the middle (shown with blue arrow 5) to open it.• Close applications - Backstep by pressing Back or Exit as many times as is needed to return to standby mode or select Options→ Exit.If you press and hold , the phone returns to standby mode and the application is left open in the background.Pressing always ends a call, even if another application is active and displayed.When you switch the phone off, applications are closed and any unsaved data is saved automatically.Tip: Select Options→ List view if you want to view the applications in a list.31425Use the scroll key to move

[ 15 ]General informationRearrange the MenuYou can rearrange the Menu in any order you like. You can move applications that you use more often from a folder to the Menu, and place applications you use less often in folders. You can also create new folders.1Scroll to the item you want to move and select Options→ Move. A check mark is placed beside the application.2Move the selection where you want the application to be and press OK. Switch between applicationsIf you have several applications open and want to switch from one application to another press and hold (Menu key). The application switching window opens showing a list of open applications. Scroll to an application and press .Note: If memory is getting low, the phone may close some applications. The phone saves any unsaved data before an application is closed. • OPTIONS LISTSIn this user guide, you can see the Options list commands that tell you what commands are available in different views and situations. The available commands change depending on the view you are in. In some situations, when you press the scroll key, a shorter options list appears showing only the main commands available in the view.Online helpYour phone has a help function that you can access from any application or view. Press Options→ Help to access the online help.

[ 16 ] • NAVIGATION BARIn the navigation bar, you can see:• Small arrows or tabs which tell you if there are more views, folders, or files you can move to.• Editing indicators, see “Write text” on p. 74.• Other information, for example, 2/14 in the following figure means that the current picture is the second of 14 pictures in the folder. Press to see the next picture. • ACTIONS COMMON TO ALL APPLICATIONSOpen items for viewingIf you want to open an item when you are viewing a list of files or folders, scroll to the item and press the scroll key, or select Options→ Open.Edit itemsTo open an item for editing, you sometimes need to first open it for viewing and then select Options→ Edit, if you want to change its contents.Rename itemsTo give a new name to a file or folder, scroll to it and select Options→ Rename. Remove, delete itemsScroll to the item and select Options→ Delete or press . To delete many items at a time, you first need to mark them.Mark an itemThere are several ways to select items when you are in a list. • To select one item at a time, scroll to it and select Options→ Mark/Unmark→ Mark or press and the scroll key at the same time. A check mark is placed next to the item.• To select all items in the list, select Option→ Mark/Unmark→ Mark all.

[ 17 ]General informationTip: For information on how to insert text and numbers, see “Write text” on p. 74.Mark multiple itemsPress and hold and at the same time move the scroll key down or up. As the selection moves, a check mark is placed next to the items. To end the selection, stop the scrolling with the scroll key and then release .• After you have selected all the items you want, you can move or delete them by selecting Options→ Move to folder or Delete.• To unmark an item, scroll to it and select Options→ Mark/Unmark→ Unmark or press and the scroll key at the same time.Create foldersTo create a new folder, select Options→ New folder. You are asked to give a name to the folder (max. 35 letters).Move items to a folderTo move items to a folder or between folders, select Options→ Move to folder (not shown if there are no folders available). When you select Move to folder, a list of available folders opens and you can also see the root level of the application (for moving an item out of a folder). Select the location you want the item to be moved to and press OK. Search for itemsYou can search for a name, file, folder, or shortcut by using the search field. In some situations the search field is not visible automatically, and you can activate it by selecting Options→ Find or just by starting to key in letters. 1To search for an item, start to key in text in the search field. The phone immediately starts to search for matches and moves the selection to the best match.

[ 18 ]To make the search more accurate, key in more letters and the selection moves to the item that best matches the letters.2When the correct item is found, press to open it. • VOLUME CONTROLWhen you have an active call or are listening to a sound, press to increase or to decrease the volume level.LoudspeakerYour phone has a loudspeaker for handsfree use. The loudspeaker allows you to speak and listen to the phone from a short distance without having to hold the phone to your ear. The loudspeaker can be used during a call, with sound applications, and when viewing multimedia messages. RealOne Player™ uses the loudspeaker by default when you watch a video. Using the loudspeaker makes it easier to use other applications during a call.Voice volume icons: - for earpiece mode, - for loudspeaker mode. ACTIVATE THE LOUDSPEAKERTo use the loudspeaker during an already active call, select Options→ Activate loudsp. or press Loudsp.. A tone is played, is shown in the navigation bar, and the volume indicator changes. Volume indicators for earpiece and loudspeaker modes are shown in the navigation bar.Note: The loudspeaker cannot be activated when you have a headset connected to the phone.Important: Do not hold the phone near your ear when the loudspeaker is in use because the volume may be extremely loud.The loudspeaker needs to be activated separately each time for phone calls, but the sound applications such as Composer and Recorder use the loudspeaker by default.

[ 19 ]General informationTURN OFF THE LOUDSPEAKERWhen you have an active call or a sound is playing, select Options→ Activate handset or press Handset.Headset modeTo adjust the volume level when a headset is connected to your phone, press or or use the headset’s keys. • SHARED MEMORYThe following features in your phone use shared memory: contacts, text, text messages, multimedia messages, images and ringing tones, video recorder and player, calendar and to-do notes, and downloaded applications. Using any of these features leaves less memory for other features. This is especially true with heavy use of any of the features. For example, saving many images may take all of the shared memory and your phone may display that the memory is full. In this case, delete some of the information or entries reserving the shared memory. • ACCESS ALTERNATE FORMATSThis user guide is available in alternate formats. Contact Nokia at www.nokiaaccessibility.com or call 1-888-665-4228 for more information.TTY/TDD users can contact Nokia at 1-800-246-6542.

[ 20 ]3 Your phone • MAKE A CALL1In standby mode, key in the phone number, including the area code. Press or to move the cursor. Press to remove a number.For international calls, press twice for the international prefix (the + character replaces the international access code) and then key in the country code, the area code without 0, and the phone number.Tip: To adjust the volume during a call, press to increase and to decrease the volume level.Note: Calls described here as international may, in some cases, be made between regions of the same nation.2Press to call the number.3Press to end the call (or to cancel the call attempt).Normal position: Hold the phone as you would hold any other telephone.Note: Pressing will always end a call, even if another application is active and displayed on the display.Make a call using the Contacts directory1To open the Contacts directory, go to Menu→ Contacts.2 To find a contact, scroll to the desired name, or key in the first letters of the name. The Search field opens automatically and matching contacts are listed. 3 Press to start the call.If the contact has more than one phone number, scroll to the number and press to start the call.

[ 21 ]Your phoneCall your voice mailboxThe voice mailbox (system service) is an answering machine where callers who are unable to reach you can leave you voice messages.• To call your voice mailbox, press and in standby mode.• If the phone asks for the voice mailbox number, key it in and press OK. You can obtain this number from your service provider.See also “Settings for call forwarding” on p. 24.Each phone line may have its own voice mailbox number, see “Line in use (system service)” on p. 34.Tip: If your voice mail requires you to enter a password every time you call to listen to your voice messages, you may want to add a touch tone number after the voice mailbox number. This way the password is given automatically every time you call your voice mail. For example, 1234567p1234# where 1234 is the password and ‘p’ inserts a pause.Change the voice mailbox numberTo change the phone number of your voice mailbox, go to Menu→ Tools→ Voice mail and select Options→ Change number. Key in the number (obtained from your service provider) and press OK.1-touch dialingTo view the 1-touch dialing grid, go to Menu→ Tools→ 1-touch dial.• Assign a phone number to one of the 1-touch dialing keys ( to ), see “Assign 1-touch dialing keys” on p. 54.• To call the number: In standby mode, press the corresponding 1-touch dialing key and . If the 1-touch dialing function is set to On, press and hold the corresponding 1-touch dialing key until the call is started. Make a conference callConference calling is a system service that allows you to make a conference call with a maximum of six participants, including yourself.1Make a call to the first participant.

[ 22 ]2To make a call to a new participant, select Options→ New call. Key in or search the memory for the phone number of the participant and press OK. The first call is automatically put on hold.3When the new call has been answered, join the first participant in the conference call. Select Options→Conference.4To add a new person to the call, repeat step 2 and then select Options→ Conference→ Add to conference.• To have a private conversation with one of the participants: Select Options→ Conference→ Private. Scroll to the desired participant and press Private. The conference call is put on hold in your phone, and the other participants can still continue talking with each other while you have a private discussion with one participant only. Once you have finished the private conversation, select Options→ Add to conference to return to the conference call.• To drop one participant from the conference call, select Options→ Conference→ Drop participant, then scroll to the participant and press Drop. 5To end the active conference call, press .A conference call with two participants is shown.Tip: The quickest way to make a new call is to dial the number and press to start the call. The existing call is automatically put on hold.

[ 23 ]Your phone • ANSWER A CALL• To answer an incoming call, press .• To end the call, press .If you do not want to answer a call, press . The caller will be directed to voice mail.Note: If you have activated the Call forward→ If busy function to forward calls, for example, to your voice mailbox, rejecting an incoming call will also forward the call. See “Settings for call forwarding” on p. 24.When a call comes in, press Silence to quickly mute the ringing tone. If you then want the call to be directed to voice mail, press again for Decline.Tip: To adjust the ringing tones for different environments and events, for example, when you want your phone to be silent, see “Profiles” on p. 104.Note: It is possible that the phone assigns a wrong name for the phone number. This happens if the phone number of the caller is not stored in Contacts but the seven last digits of the number match another number that is stored in Contacts. In this case, call identification is not correct.Call waiting (system service)If you have activated the Call waiting service, the system will notify you of a new incoming call while you have a call in progress. See “Call waiting (system service)” on p. 34.1 During a call, press to answer the waiting call. The first call is put on hold.To switch between the two calls, press Swap.2 To end the active call, press .Tip: To end both calls at the same time, select Options→ End all calls and press OK.

[ 24 ]Options during a callMany options that you can use during a call are system services. Press Options during a call for some of the following options:Mute or Unmute, End active call, End all calls, Hold or Unhold, Handset, BT handsfree, New call, Conference, Private, Drop participant, Answer, and Decline.Swap is used to switch between the active call and the call on hold.Transfer is used to connect an incoming call or a call on hold with an active call and to disconnect yourself from both calls.Send touch tones is used to send touch tone strings, for example, passwords or bank account numbers. 1Key in the digits with to . Each keystroke generates a touch tone, which is transmitted while the call is active. Press repeatedly to produce: *, p (inserts a pause of about two seconds before, or between touch tone characters.), and w (if you use this character, the remaining sequence is not sent until you press Send again during the call). Press to produce #.2To send the tone, press OK.Tip: You can also store a sequence of touch tones for a contact card. When you make a call to the contact, you can retrieve the sequence. Add touch tones to the phone number or Touch tone fields in a contact card. Glossary: Touch tones are the tones you hear when you press the number keys on the phone keypad. Touch tones allow you to communicate with voice mailboxes and computerized telephony systems, for example.Settings for call forwardingWhen call forwarding is activated, you can direct your incoming calls to another number, for example, to your voice mailbox number. For details, contact your service provider.Go to Menu→ Tools→ Call forward.

[ 25 ]Your phone• Select one of the forward options, for example, select If busy to forward voice calls when your number is busy or when you decline incoming calls.• Select Options→ Activate to set the forward setting on, Cancel to set the forward setting off, or Check status to check whether the forward is activated or not.• To cancel all active forwards, select Options→ Cancel all forwards.For information about the forward indicators, see “Activity indicators” on p. 12.Note: Rejection of incoming calls and call forwarding cannot be active at the same time. See “Call restriction (system service)” on p. 47. • LOG - CALL LOG AND GENERAL LOGGo to Menu→ Log.In the log you can monitor phone calls, text messages, packet data connections, and fax and data calls registered by the phone. You can filter the log to view just one type of event and create new contact cards based on the log information.Note: The Log does not track sent messages. To view a list of sent messages, go to Messaging→ Sent.Note: Connections to your remote mailbox, multimedia messaging center, or browser pages are shown as data calls or packet data connections in the general communications log.Recent calls logGo to Menu→ Log→ Recent calls.The phone registers the phone numbers of missed, received, and dialed calls. The phone registers missed and received calls only if the system supports these functions, and the phone is switched on and within the system’s service area.

[ 26 ]Options in the Missed, Received, Dialed views are: Call, Use number, Delete, Clear list, Add to Contacts, Help, and Exit.Missed calls and received callsTo view the phone numbers of the last 20 missed calls, go to Log→ Recent calls→ Missed calls.When you see a note in standby mode about missed calls, press Show to access the list of missed calls. To call back, scroll to the number or name you want and press .To view a list of the 20 numbers or names from which you have most recently accepted calls (system service), go to Log→ Recent calls→ Received calls.Dialed numbersPress in standby mode to open the Dialed numbers view.To view the 20 phone numbers that you have most recently called or attempted to call, go to Log→ Recent calls→ Dialed numbers.Erasing recent call lists• To clear all recent call lists, select Options→ Clear recent calls in the Recent calls main view.• To clear one of the call registers, open the log you want to erase and select Options→ Clear list. • To clear an individual event, open a log, scroll to the event, and press .Iconsfor missed callsfor received callsfor dialed numbers

[ 27 ]Your phoneCall timersGo to Menu→ Log→ Call timers.Allows you to view the duration of your incoming and outgoing calls. If you want the call duration timer to be displayed during your active calls, select Log→ Call timers, and then select Options→ Settings→ Show call duration→ Yes.Note: Some timers, including the life timer, may be reset during service or software upgrades.Erasing call duration timers - Select Log→ Call timers, and then select Options→ Clear timers. For this you need the lock code. See “Security” on p. 43. To clear an individual event, scroll to it and press .Call costs (system service)Go to Log→ Call costs.Call costs allows you to check the cost of the last call or all calls. The call costs are displayed separately for each SIM card. Note: The actual invoice for calls and services from your service provider may vary, depending upon system features, rounding-off for billing, taxes, and so forth.CALL COSTS LIMITYour service provider can limit the cost of your calls to a certain amount of charging units or units of currency. When the limited charging mode is active, calls can be made only as long as the preset credit limit (call cost limit) is not exceeded and you are in a system that supports call cost limit. The number of remaining units is shown during a call and in standby mode. When the charging units have expired, the note Call cost limit reached is displayed. Contact your service provider for information on the limited charging mode and charging unit prices.

[ 28 ]COST SHOWN AS CHARGING UNITS OR CURRENCYYou can set the phone to show the remaining talk-time in charging units or units of currency. For this, you may need the PIN2 code. See “Security” on p. 43.1Select Options→ Settings→ Show costs in. The options are Currency and Units.2If you choose Currency, a note requesting you to write the unit price is shown. Key in the cost of your home system charging or credit unit and press OK. 3Write a name for the currency. Use a three-letter abbreviation, for example, USD.Note: When no more charging units or currency units are left, calls may only be possible to the emergency number programmed into your phone (such as 911 or other official emergency numbers).SET A CALL COST LIMIT1Select Options→ Settings→ Call cost limit→ On.2The phone requests you to enter the limit in units. For this you may need the PIN2 code. Depending on the Show costs in setting, enter either the amount of charging units or currency.When the charging limit you have set yourself is reached, the counter stops at its maximum value and the note Reset all calls' cost counter is displayed. To be able to make calls, go to Options→ Settings→ Call cost limit→ Off. For this you need the PIN2 code. See “Security” on p. 43.Note: The actual invoice for calls and services from your service provider may vary, depending upon system features, rounding-off for billing, taxes and so forth.ERASE CALL COST COUNTERSSelect Options→ Clear counters. For this you need the PIN2 code. To clear an individual event, scroll to it and press .GPRS data counterGo to Log→ GPRS counter.

[ 29 ]Your phoneAllows you to check the amount of data sent and received during packet data (GPRS) connections. Check with your service provider for information on how you will be charged.View the general logGo to Menu→ Log and press .In the general log, for each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point.Note: Sub-events, such as a text message sent in more than one part and packet data connections, are logged as one communication event.FILTER THE LOG1Select Options→ Filter. A list of filters opens. 2Scroll to a filter and press Select.Note: You cannot get to the Filter option unless there are already calls in the log.Note: Erase the contents of the logTo permanently erase all the log contents, recent calls log, and messaging delivery reports permanently, select Options→ Clear log. Confirm by pressing OK.PACKET DATA COUNTER AND CONNECTION TIMERTo view how much data, measured in kilobytes, has been transferred and how long a certain GPRS connection has lasted, scroll to an Incoming or Outgoing event with the access point icon and select Options→ View details. Iconsfor incoming for outgoing for missed communication events

[ 30 ]LOG SETTINGSSelect Options→ Settings. The list of settings opens.•Log duration - The log events remain in the phone memory for a set number of days after which they are automatically erased to free memory. If you select No log, all the log contents, Recent calls log, and Messaging delivery reports are permanently deleted.•For Call duration, Show costs in, Call cost limit, see “Call timers” on p. 27 and “Call costs (system service)” on p. 27. • SIM FOLDERGo to Menu→ SIM.Your SIM card may provide additional services that you can access in this folder. See also “Copy between SIM card and phone memory” on p. 49, “Confirm SIM service actions” on p. 45, “Fixed dialing” on p. 44, and “View messages on a SIM card” on p. 96.In the SIM directory, you can see the names and numbers stored on the SIM card, you can add or edit them, and you can make calls. To view the SIM directory, go to Go to Menu→ SIM→ SIM direct.Options in the SIM directory are: Open, Call, New SIM Contact, Edit, Delete, Mark/Unmark, Copy to Contacts, Own numbers, SIM details, Help, and Exit.Note: For availability, rates and information on using SIM services, contact your SIM card vendor, e.g. system operator, service provider, or other vendor.

[ 31 ]Settings4 Settings • CHANGE GENERAL SETTINGSGo to Menu→ Tools→ Settings.1Scroll to a setting group and press to open it.2Scroll to a setting you want to change and press to• switch between options if there are only two (On/Off). • open a list of options or an editor.• open a settings slider such as the Contrast setting. Press or to increase or decrease the value.Note: You may be able to receive some settings from your service provider in a text message. • PHONE SETTINGSGeneral•Phone language - You can change the language for the display texts in your phone. This change will also affect the format used for date and time and the separators used, for example, in calculations. There are three languages installed in your phone. If you select Automatic, the phone selects the language according to the information on your SIM card. After you have changed the display text language, you must restart the phone. Note: Changing the settings for Phone language or Writing language affects every application in your phone and the change remains effective until you change these settings again.

[ 33 ]SettingsStandby mode•Background image - You can select any image to be used as a background image in standby mode. Select Yes to select an image from Images. •Left selection key and Right selection key - You can change the shortcuts that appear over the left and right selection keys in standby mode. In addition to the applications, you can have the shortcut point to a function, for example, New message. Note: You cannot have a shortcut to an application that you have installed.Display •Contrast - To change the contrast of the display to lighter or darker. •Color palette - To change the color palette used on the display.•Screen saver timeout - The screen saver is activated when the screen saver time-out period is over. When the screen saver is active, the display is cleared and you can see the screen saver bar. To deactivate the screen saver press any key. •Screen saver - Select what is shown on the screen saver bar: time and date or a text you have written yourself. The location and background color of the screen saver bar changes in one minute intervals. Also, the screen saver changes to indicate the number of new messages or missed calls. • CALL SETTINGSNote: To change the settings for call forwarding, go to Menu→ Tools→ Call forward.Send my caller IDThis system service allows you to set your phone number to be displayed (Yes) or hidden (No) from the person to whom you are calling. Or, the value may be set by your service provider when you make a subscription (default).

[ 34 ]Call waiting (system service)The system will notify you of a new incoming call while you have a call in progress. Select Activate to request the system to activate call waiting, Cancel to request the system to deactivate call waiting, or Check status, to check if the function is active or not.Automatic redialWhen this setting is activated, your phone will make a maximum of ten attempts to connect the call after an unsuccessful call attempt. Press to stop automatic redialing.Summary after callActivate this setting if you want the phone to briefly display the duration and cost of the last call. To show costs, the Call cost limit must be activated for your SIM card.1-touch dialingSelect On and the numbers assigned to the 1-touch dialing keys ( to ) can be dialed by pressing and holding the key.Anykey answerSelect On, and you can answer an incoming call by briefly pressing any key except , , and .Line in use (system service)This setting is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line (Line 1 or Line 2) you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line.Note: You will not be able to make calls if you select Line 2 and have not subscribed to this system service.To prevent line selection, select Line change→ Disable if supported by your SIM card. To change this setting, you need the PIN2 code.Tip: To switch between the phone lines, press and hold in standby mode.Voice message indicators: , , or is shown if you have one or more voice messages.

[ 35 ]Settings • CONNECTION SETTINGSData connections and access pointsTo define settings for access points, go to Settings→ Connection settings→ Access points. A data connection is required to connect to an access point. Your phone supports three kinds of data connections:• GSM data call ( )• GSM high-speed data call ( )• Packet data (GPRS) connection ( )There are three different kinds of access points that you can define: MMS access point, browser access point, and Internet access point (IAP). Check with your service provider for the kind of access point needed for the service you wish to access. You need to define access point settings, if you want to perform the following actions:• Send and receive multimedia messages• Send and receive e-mail• Browse pages• Download Java applications• Use Image upload• Use your phone as a modemGlossary: Access point - The point where your phone connects to the Internet by way of a data call or packet data connection. An access point can be provided, for example, by a commercial Internet service provider (ISP), or service provider.GSM DATA CALLSA GSM data call enables data transmission rates to a maximum of 14.4 kb/s. For availability and subscription to data services, contact your service provider.

[ 36 ]Minimum settings needed to make a data callTo insert a set of basic GSM data call settings, go to Settings→ Connection→ Access points and select Options→ New access point. Fill in the following:•Data bearer: GSM data•Dial-up number: User defined•Session mode: Permanent•Data call type: Analog•Maximum data speed: AutomaticSee “Access points” on p. 37 for further information on how to create, delete, and edit an access point.High-speed data call (High-Speed Circuit Switched Data, HSCSD)Glossary: High-speed data enables data transmission rates to a maximum of 43.2 kb/s, which is three times faster than the standard data rates of the GSM system. HSCSD is comparable to the speed of many computer modems that communicate with today’s fixed telephone systems. For availability and subscription to high-speed data services, please contact your service provider.Note: Sending data in HSCSD mode may drain the phone’s battery faster than normal voice or data calls, as the phone may send data more frequently to the system.Tip: The Settings wizard program included in the PC Suite can help you configure access point and mailbox settings. You can also copy existing settings, for example, from your computer to your phone. See the CD-ROM supplied in the sales package.GPRS PACKET DATAGlossary: Packet data, or General Packet Radio Service (GPRS), uses packet data technology where information is sent in short bursts of data over the mobile system. The benefit of sending data in packets is that the system is occupied only when sending or receiving data. Because GPRS uses the system efficiently, it allows for quick data connection set up and fast data transmission speeds.

[ 38 ]Delete an access pointIn the list of access points, scroll to the access point you want to remove and select Options→ Delete.Edit an access pointWhen you open Access points, the list of already available access points opens. Scroll to the access point you want to edit, and press .Options when editing access point settings are: Change, Advanced settings, Help, and Exit.Here you can see a short explanation for every setting that may be needed for different data connections and access points.Note: Start entering settings on Connection name and go down the list from there because depending on which data connection you select (Data bearer) or whether you need to insert a Gateway IP address, only certain setting fields are available.Note: Follow the instructions given to you by your service provider very carefully.•Connection name - Give a descriptive name for the connection.•Data bearer - The options are GSM data, High speed GSM, and GPRS. Depending on what data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined, or marked with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider.Tip: See also “Settings for multimedia messages” on p. 99, “Settings for e-mail” on p. 101, and “Phone browser service settings” on p. 123.Note: To use a data connection, the system service provider must support this feature, and if necessary, activate it for your SIM card.•Access point name (for packet data only) - The access point name is needed to establish a connection to the GPRS system. You obtain the access point name from your service provider.

[ 39 ]Settings•Dial-up number (for GSM data and high-speed data only) - The modem telephone number of the access point.•User name - Write a user name if required by the service provider. The user name may be needed to make a data connection, and is usually provided by the service provider. The user name is often case-sensitive.Tip: When you are writing, press to open the special characters table. Press to enter a space.•Prompt password - If you must key in a new password every time you log on to a server, or if you do not want to save your password to the phone, choose Yes.•Password - A password may be needed to make a data connection, and is usually provided by the service provider. The password is often case-sensitive. When you are writing the password, the characters you enter are shown briefly and then changed to asterisks (*). The easiest way to enter numbers is to press and select Insert number and then continue entering letters.•Authentication - Normal / Secure.•Gateway IP address - The IP address used by required browser gateway.•Homepage - Depending on what you are setting up, enter one of the following: • the service address• the address of the multimedia messaging centerGlossary: ISDN connections are a way to establish a data call between your phone and your access point. ISDN connections are digital from end to end and as such offer quicker set-up times and faster data rates than analog connections. In order to use an ISDN connection, both your service provider and your Internet service provider must support it.•Connection security - Choose whether Transport Layer Security (TLS) is used for the connection. Follow the instructions from your service provider.

[ 41 ]SettingsNote: Charges may apply for certain types of received calls, such as roaming and high-speed data calls. Contact your GSM service provider for more information.Note: The phone expects the callback call to use the same data call settings that were used in the callback-requesting call. The system must support this type of call in both directions, to and from the phone.•Callback type - The options are Use server no. / Use other no. Ask your service provider for the correct setting; it will depend on the service provider’s configuration.•Callback number - Key in your phone’s data phone number which the dial back server uses. Usually, this number is the data call phone number of your phone.•Use PPP compression - When set to Yes, this option speeds up the data transfer, if supported by the remote PPP server. If you have problems with establishing a connection, try setting this to No. Contact your service provider for guidance.Glossary: PPP (Point-to-Point Protocol) - a common networking software protocol that enables any computer with a modem and a phone line to connect directly to the Internet.•Use login script - The options are Yes / No.•Login script - Insert the login script.•Modem initialization - (Modem initialization string) - Controls your phone using modem AT commands. If required, enter characters specified by your GSM system service provider or Internet service provider.

[ 42 ]GPRSGo to Settings→ Connection settings→ GPRS.The GPRS settings affect all access points using a packet data connection.GPRS connection - If you select When available and you are in a system that supports packet data, the phone registers to the GPRS system and sending text messages will be done via GPRS. Also, starting an active packet data connection, for example, to send and receive e-mail, is quicker. If you select When needed, the phone will use a packet data connection only if you start an application or action that needs it. The GPRS connection is closed after it is not used by any application. Note: If there is no GPRS coverage and you have chosen When available, the phone will periodically try to establish a packet data connection.Access point - The access point name is needed when you want to use your phone as a packet data modem to your computer.Data callGo to Settings→ Connection settings→ Data call.The Data call settings affect all access points using a data call and high-speed data call.Online time - If there are no actions the data call is dropped automatically after a time-out period. The options are User defined, in which case you enter a time, or Unlimited. • DATE AND TIMEThe date and time settings allow you to define the date and time used in your phone, as well as change the date and time format and separators. Choose Clock type→ Analog or Digital to change the clock shown in standby mode. Choose Auto time update if you want the mobile phone system to update time, date, and time zone information to your phone (system service). Tip: For the Auto time update setting to take effect, the phone needs to be restarted.

[ 43 ]Settings • SECURITYPhone and SIMExplanations for the different security codes that may be needed:•PIN code (4 to 8 digits) - The PIN (Personal Identification Number) code protects your SIM card against unauthorized use. The PIN code is usually supplied with the SIM card. After three consecutive incorrect PIN code entries, the PIN code is blocked. If the PIN code is blocked, you need to unblock the PIN code before you can use the SIM card again. See the information about the PUK code.•PIN2 code (4 to 8 digits) - The PIN2 code, supplied with some SIM cards, is required to access some functions, such as call cost counters.•Lock code (5 digits) - The lock code can be used to lock the phone and keypad to avoid unauthorized use. Note: The factory setting for the lock code is 12345. To avoid unauthorized use of your phone, change the lock code. Keep the new code secret and in a safe place separate from your phone.•PUK and PUK2 codes (8 digits) - The PUK (Personal Unblocking Key) code is required to change a blocked PIN code. The PUK2 code is required to change a blocked PIN2 code. If the codes are not supplied with the SIM card, contact the operator whose SIM card is in your phone for the codes.You can change the following codes: lock code, PIN code, and PIN2 code. These codes can only include the numbers from 0 to 9. Note: Avoid using access codes similar to the emergency numbers, such as 911, to prevent accidental dialing of the emergency number.PIN code request - When the PIN code request is active, the code is requested each time the phone is switched on. Note that deactivating the PIN code request may not be allowed by some SIM cards.PIN code / PIN2 code / Lock code - Open this setting if you want to change the code.Tip: To lock the phone manually, press . A list of commands opens. Select Lock phone.

[ 44 ]Autolock period - You can set an autolock period, a time-out after which the phone is automatically locked and can be used only if the correct lock code is entered. Key in a number for the time-out in minutes or select None to turn off the autolock period. To unlock the phone, key in the lock code.Note: When the phone is locked, calls may be possible to the emergency number programed into your phone (e.g. 911 or other official emergency number).Lock if SIM changed - Select Yes if you want the phone to ask for the lock code when an unknown, new SIM card is inserted into your phone. The phone maintains a list of SIM cards that are recognized as the owner’s cards.Fixed dialing - You can restrict your outgoing calls to selected phone numbers, if supported by your SIM card. You need the PIN2 code for this function. When this function is active, you can only call those phone numbers that are included in the fixed dialing list or which begin with the same digit(s) as a phone number on the list.To view the list of Fixed dialing numbers, go to Menu→ SIM→ Fixed dialing.Options in the Fixed dialing view are: Open, Call, New contact, Edit, Delete, Add to Contacts, Add from Contacts, Help and Exit.Note: When Fixed Dialing is set on, calls may be possible to certain emergency numbers programmed into your phone (911 or other official emergency numbers).To add new numbers to the Fixed dialing list, select Options→ New contact or Add from Contacts. Closed user group (system service) - You can specify a group of people to whom you can call and who can call you. For more information, contact your service provider. Select Default to activate the default group agreed on with the service provider, On if you want to use another group (you need to know the group index number), or Off.Note: When calls are limited to Closed User Groups, calls may be possible to certain emergency numbers programmed into your phone (911 or other official emergency numbers).

[ 45 ]SettingsConfirm SIM services (network service) - You can set the phone to display confirmation messages when you are using a SIM card service.Certificate managementIn the Certificate management main view, you can see a list of authority certificates that have been stored in your phone. To manage certificates, go to Menu→ Settings→ Security→ Certif. management. Press to see a list of user certificates, if available.Options in the certificate management main view are: Certificate details, Delete, Trust settings, Mark/Unmark, Help, and Exit.Glossary: Digital certificates are used to verify the origin of browser pages and installed software. However, they can only be trusted if the origin of the certificate is known to be authentic. Digital certificates are needed if you:• want to connect to an online bank, another site, or remote server for actions that involve transferring confidential information, or• want to minimize the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software.Glossary: Authority certificates are used by some services, such as banking services, for checking signatures or server certificates or other authority certificates.Important: Although the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available.Glossary: User certificates are issued to users by a Certifying Authority.

[ 46 ]Viewing certificate details - checking authenticityYou can only be sure of the correct identity of a browser gateway or a server when the signature and the period of validity of a browser gateway or server certificate have been checked. You will be notified on the phone’s display • if the identity of the browser server or gateway is not authentic or • if you do not have the correct security certificate in your phone. To check certificate details, scroll to a certificate and select Options→ Certificate details. When you open certificate details, Certificate management checks the validity of the certificate and one of the following notes may appear:•Certificate not trusted - You have not set any application to use the certificate. For more information, see “Change the trust settings of an authority certificate” on p. 46.•Expired certificate - The period of validity has ended for the selected certificate.•Certificate not valid yet - The period of validity has not yet begun for the selected certificate.•Certificate corrupted - The certificate cannot be used. Contact the certificate issuer.Important: Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your phone are correct.Change the trust settings of an authority certificateScroll to an authority certificate and select Options→ Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. For example:Services / Yes - the certificate is able to certify sites. Application manager / Yes - the certificate is able to certify the origin of new software.Internet / Yes - the certificate is able to certify e-mail and imaging servers.

[ 47 ]SettingsImportant: Before changing these settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner. • CALL RESTRICTION (SYSTEM SERVICE)Call restriction allows you to restrict the making and receiving of calls with your phone. For this function, get the restriction password from your service provider.1Scroll to one of the restriction options.2Select Options→ Activate to request the system to set call restriction on, Cancel to set the selected call restriction off, or Check status to check if the calls are restricted or not. • Select Options→ Edit restriction passw. to change the restriction password.• Select Options→ Cancel all restrictions to cancel all active call restrictions.Note: When calls are restricted, calls may be possible to certain emergency numbers programmed into your phone (911 or other official emergency numbers). Call restricting affects all calls, including data calls. You cannot have restriction of incoming calls and call forwarding or fixed dialing active at the same time. •SYSTEMSystem selectionChoose Automatic to set the phone to automatically search for and select one of the cellular systems available in your area, orChoose Manual if you want to select the desired system manually from a list of systems. If the connection to the manually selected system is lost, the phone will sound an error tone and ask you to select a system again. The selected system must have a roaming agreement with your home system, that is, the operator whose SIM card is in your phone.

[ 49 ]Contacts5ContactsTo open Contacts, press in standby mode or go to Menu→ Contacts.In Contacts, you can store and manage contact information, such as names, phone numbers, and addresses.Contacts use shared memory. See “Shared memory” on p. 19.You can also add a personal ringing tone, voice tag, or a thumbnail image to a contact card. You can create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. • CREATE CONTACT CARDS1Open Contacts and select Options→ New contact. An empty contact card opens. 2Fill in the fields you want and press Done. The contact card is saved and closed, and appears in the Contacts directory. • COPY BETWEEN SIM CARD AND PHONE MEMORY• To copy names and numbers from a SIM card to your phone, go to Menu→ SIM→ SIM directory. Select the name(s) you want to copy and select Options→ Copy to Contacts.• If you want to copy a phone, fax, or pager number from Contacts to your SIM card, go to Contacts, open a contact card, scroll to the number, and select Options→ Copy to SIM direct.

[ 50 ] • EDIT CONTACT CARDSOptions in the Contacts directory are: Open, Call, Create message, New contact, Edit, Delete, Duplicate, Add to group, Belongs to groups, Mark/Unmark, Send business card, Contacts info, Help, and Exit.Options when editing a contact card are: Add thumbnail / Remove thumbnail, Add detail, Delete detail, Edit label, Help, and Exit.1In the Contacts directory, scroll to the contact card you want to edit and press to open it.2To change the information on the card, select Options→ Edit.3To save your changes and to return to the contact card view, press Done.Delete contact cardsIn the Contacts directory, scroll to the contact card you want to delete and select Options→ Delete.To delete many contact cards1Mark the cards to be deleted. Scroll to a contact you want to delete and select Options→ Mark. A check mark is placed next to the contact card. 2When you have marked all the contacts you want to delete, select Options→ Delete. Tip: You can also mark many items if you press and hold and simultaneously press . See also “Actions common to all applications” on p. 16.Add and remove contact card fields1Open a contact card and select Options→ Edit.2To add an extra field, select Options→ Add detail.To delete a field you do not need, select Options→ Delete detail.To rename a contact card field label, select Options→ Edit label.

[ 51 ]ContactsAdd a picture to a contact cardThere are two different types of pictures you can add to a contact card. See “Camera and images” on p. 57 for more information on how to take and store pictures.• To attach a small thumbnail image to a contact card, open a contact card, select Options→ Edit and then select Options→ Add thumbnail. The thumbnail image is also shown when the contact is calling you.Note: After you attach a thumbnail image to a contact card, you can select Add thumbnail to replace the image with a different thumbnail or Remove thumbnail to remove the thumbnail from the contact card.• To add an image to a contact card, open a contact card, and press to open the image view ( ). To attach an image, select Options→ Add image. • VIEW A CONTACT CARDContact information view ( ) shows all information inserted in the contact card. Press to open the Image view .Note: Only fields that have information are displayed in the contact information view. Select Options→ Edit if you want to see all fields and add more data to the contact.Options when viewing a contact card (when the selection is on a phone number) are: Call, Create message, Edit, Delete, Defaults, Add voice tag / Voice tags, Assign 1-touch dial / Remove 1-touch dial, Ringing tone, Copy to SIM direct., Send business card, Help, and Exit.Assign default numbers and addressesIf a contact has several phone numbers or e-mail addresses, to speed up calling and sending messages, you can define certain numbers and addresses to be used as the default.

[ 52 ]Open a contact card and select Options→ Defaults. A pop-up window opens, listing the different options.Example: Scroll to Phone number and press Assign. A list of phone numbers in the selected contact card is shown. Scroll to the one you want to have as the default and press . When you return to the contact card view, you can see the default number underlined.Voice dialingYou can make a phone call by saying a voice tag that has been added to a contact card. Any spoken word(s) can be a voice tag. Before using voice dialing, note that:• Voice tags are not language dependent. They are dependent on the speaker's voice.• Voice tags are sensitive to background noise. Record them and make calls in a quiet environment.• Very short names are not accepted. Use long names and avoid similar names for different numbers.Example: You can use a person’s name for a voice tag, for example, “John’s cell”.Note: You must say the name exactly as you said it when you recorded it. This may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.ADD A VOICE TAG TO A PHONE NUMBERGlossary: Voice tags can be any spoken words, for example, a person’s first name. Voice tags allow you to make phone calls by simply saying the word aloud.Note: You can have only one voice tag per contact card. Voice tags can only be added to phone numbers stored in phone memory. See “Copy between SIM card and phone memory” on p. 49. 1In the Contacts directory, scroll to the contact to which you want to add a voice tag and press to open the contact card.

[ 53 ]Contacts2Scroll to the number to which you want to add the voice tag and select Options→ Add voice tag. Press Start, then speak after tone is displayed.3Press Start to record a voice tag. The phone sounds a starting tone and Speak now is displayed.When recording, hold the phone a short distance from your mouth. After the starting tone, say clearly the word(s) you want to record as a voice tag.4After recording, the phone plays the recorded tag and Playing voice tag is displayed. If you do not want to save the recording, press Quit.5When the voice tag has been successfully saved, Voice tag saved is displayed and a beep sounds. A symbol can be seen next to the number in the contact card. Note: Your phone may have 30 phone numbers to which voice tags are attached. If the memory becomes full, delete some of the voice tags. Tip: To view a list of voice tags you have defined, select Options→ Contacts info→ Voice tags in the Contacts directory.MAKE A CALL BY SAYING A VOICE TAGNote: You must say the voice tag exactly as you said it when you recorded it.1In standby mode, press and hold . A short tone is played and the note Speak now is displayed.2When you are making a call by saying a voice tag, the loudspeaker is in use. Hold the phone at a short distance away from your mouth and face and say the voice tag clearly.3The phone plays the original voice tag, displays the name and number, and after 1.5 seconds dials the number of the recognized voice tag.If the phone plays the wrong voice tag or to retry voice dialing, press Retry.Note: When an application using a data call or GPRS connection is sending or receiving data, you cannot make a call by using voice dialing. To make a call by using a voice tag, end all active data connections.

[ 54 ]REPLAY, ERASE, OR CHANGE A VOICE TAG1To replay, erase, or change a voice tag, open the Contacts directory and select Options→ Contacts info→ Voice tags. A list of contacts with voice tags is displayed. 2Scroll to a contact, select Options, and then select one of the following:Playback - to listen to the voice tag again, orDelete - to erase the voice tag, orChange - to record a new voice tag instead of the old one. Press Start to record.Assign 1-touch dialing keys1-touch dialing is a quick way to call frequently used numbers. You can assign 1-touch dialing keys to eight phone numbers. Number 1 is reserved for the voice mailbox. 1Open the contact card for which you want a 1-touch dialing key and select Options→ Assign 1-touch no. The 1-touch dialing grid opens, showing you the numbers from 1-9.2Scroll to a number and press Assign. When you return to the contact information view, you can see the 1-touch dial icon next to the number.To call the contact by 1-touch dialing, go to standby mode and press the 1-touch dialing key and .Add a ringing tone for a contact card or groupYou can set a ringing tone for each contact card and group. When that contact or group member calls you, the phone plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your phone recognizes it).1Press to open a contact card or go to the Groups list and select a contact group.2Select Options→ Ringing tone. A list of ringing tones opens.

[ 55 ]Contacts3Use the scroll key to select the ringing tone you wish to use for the contact or group and press Select.To remove the ringing tone, select No personal tone from the list of ringing tones.Note: For an individual contact, the phone will always use the ringing tone that was assigned last. So, if you first change a group ringing tone and then the ringing tone of a single contact that belongs to that group, the ringing tone of the single contact will be used when the contact calls you the next time.Tip: To listen to a ringing tone, go to Recorder.Send contact informationYou can send contact information via text message, e-mail, Bluetooth connection, or infrared connection.1In the Contacts directory, scroll to the card you want to send.2Select Options→ Send then select the method; the choices are: Via text message, Via e-mail (available only if the correct e-mail settings are in place), Via Bluetooth, or Via Infrared. For further information, see the ‘Messaging’ chapter, “Send and receive data via infrared” on p. 143, and “Send data via Bluetooth connection” on p. 139.You can add received contact cards to your Contacts directory. See “Receive smart messages” on p. 88 for further information.Glossary: When you send or receive contact information, the term ‘business card’ is used. A business card is a contact card in a format suitable to be sent in a text message, usually in ‘vCard’ format. • MANAGE CONTACT GROUPSOptions in the Groups list view are: Open, New group, Delete, Rename, Ringing tone, Contacts info, Help, and Exit.You can create contact groups that can, for example, be used as distribution lists for sending text messages and e-mail. See “Add a ringing tone for a contact card or group” on p. 54.

[ 56 ]Create contact groups1In the Contacts directory, press to open the Groups list.2Select Options→ New group.3Write a name for the group or use the default name Group and press OK. Add members to a group1In the Contacts directory, scroll to the contact you want to add to a group and select Options→ Add to group:. A list of available groups opens. 2Scroll to the group to which you want to add the contact and press .ADD MULTIPLE MEMBERS AT A TIME1In the Groups list, open a group and select Options→ Add members.2Scroll to a contact and press to mark it. Repeat this action on all the contacts you want to add and press OK to add them to the selected group.Remove members from a group1Go to the Groups list, scroll to the group you want to modify, and press .2Scroll to the contact you want to remove and select Options→ Remove from group.3Press Yes to remove the contact from the group. • IMPORT DATA FROM OTHER NOKIA PHONESYou can move calendar, contacts, and to-do data from many different Nokia phones to your Nokia 3600 or Nokia 3650 using the PC Suite Data Import application. Instructions for using the application can be found in the PC Suite online help on the CD-ROM.

[ 57 ]Camera and images6 Camera and imagesWith the camera you can take pictures of people or events while on the move. The pictures are automatically saved in the Images application, where you can rename them and organize them in folders. You can also send photos to your friends in a multimedia message, as an e-mail attachment, or via a Bluetooth or infrared connection. The camera produces JPEG pictures.Press Camera in standby mode or go to Menu→ Camera.Options before taking a picture are: Capture, Go to Images, Settings, Help, and Exit.Glossary: JPEG is a standardized image compression format. JPEG files can be viewed with the most common image viewers, image editors, and Internet browsers. You can recognize these files by their *.jpg extension, for example, boats.jpg • TAKE PICTURESNote: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.1Press Camera in standby mode. The Camera application opens and you can see the view to be captured. You can see the viewfinder and the cropping lines, which show you the image area to be captured. You can also see the image counter, which shows you how many images, depending on the selected image quality, fit in the memory of your phone.2To take a picture, press .

[ 58 ]Note: Do not move the phone before the Camera application starts to save the photo. The photos are saved automatically in the Images application. The Camera goes into battery saving mode within a minute if there have been no key presses. To continue taking pictures, press .After the image has been saved:• If you do not want to save the photo in Images, select Options→ Delete.• To return to the viewfinder to take a new picture, press .Options after a picture has been taken are: New image, Delete, Send, Rename image, Go to Images, Settings, Help, and Exit.Important: Obey all local laws governing the taking of pictures. Do not use this feature illegally.SettingsIn the Camera application settings, you can adjust the image quality setting and change the default image name. 1Select Options→ Settings.2Scroll to the setting you want to change:•Image quality - High, Normal, and Basic. The better the image quality, the more memory the image consumes. See also “Images and memory consumption” on p. 60.•Default image name - By default, the Camera names photos in the JPEG format (for example, ‘Image.jpg’). Default image name allows you to set a name for the pictures taken.•Memory in use - Select whether you want to store your images in the phone memory or the memory card, if you use one.Example: If you set ‘Beach’ as the default image name, Camera will name all the pictures you take ‘Beach’, ‘Beach(01)’, ‘Beach(02)’, and so on, until you change the setting.

[ 59 ]Camera and imagesCamera modesWith the different Camera modes, you can affect the size and orientation of the picture to be taken. When you are taking a picture, press or to change between the different modes. Choose:•Standard when you want to take normal landscape pictures•Portrait when you want to take a smaller icon-sized, vertical picture, which can be added to a contact card•Night when the lighting is dim and the Camera needs a longer exposure time for the picture to be of good quality. Note that, in dim conditions, any movement while taking a picture may cause it to get blurred. The image size and orientation is the same for Standard and NightTip: Try out the different Camera modes to see how they affect the picture taken.IMAGE RESOLUTIONS• When you are taking a picture in Standard or Night mode, the viewfinder resolution is 160x120 pixels and 80x96 for Portrait mode. • The images taken in Standard or Night mode are saved in 640x480 pixel (VGA) format and those taken in Portrait mode are saved in 80x96 pixel format.

[ 60 ]• When you are viewing images, they are scaled to fit the display, which has 176x208 pixels. This means that Standard and Night mode pictures will appear more detailed when viewed on a higher resolution screen, for example, a computer or when zoomed in Images. Glossary: Resolution - A measure for the sharpness and clarity of an image. Resolution refers to the number of dots (pixels) in an image or a display. The more pixels there are, the more detailed the picture is. Resolution is usually measured in pixels, for example, 640x480=300 kilopixels (kpix)=0.3 megapixels (Mpix).IMAGES AND MEMORY CONSUMPTIONYour phone has approximately 3 MB (megabytes) of free memory for images, contact information, calendar, messages, and so on. See “Shared memory” on p. 19. Portrait images (always taken in High quality) are so small that they take up very little memory. Images taken using the High quality setting and those taken in Night mode take up the most memory.If 1 MB of memory is used for images only, it would fit approximately 22 Normal quality images taken in Standard mode. In the table below, you can see approximately how many images would fit in 1 MB of memory.Tip: By using a memory card with your phone you can increase the number of images you can store. To see how much memory is available on your phone and memory card, see “Check memory consumption” on p. 121.Image qualityImage type Basic Normal HighStandard 55 22 15Night 50 25 18Portrait -->300

[ 61 ]Camera and images • STORE PICTURES IN IMAGESGo to Menu→ Images.Images allows you to view, organize, delete, and send photos and pictures stored in your phone. In Images you can organize photos: • Taken with the camera.• Sent to your Inbox in a multimedia or a picture message, as an e-mail attachment, via an infrared or Bluetooth connection. After receiving the image in Inbox, you need to save it in Images.In the Images main view, you can see a list of photos and folders. The list shows:• The date and time a photo or an image was taken or saved.• A small thumbnail picture, a preview of the image.• The number of images inside a folder.• A tab showing whether the photos or folders are located in the phone’s memory or the memory card, if you use one.Options in Images are: Open, Send, Image uploader, Delete, Move to folder, New folder, Mark/Unmark, Rename, Receive via infrared (only from a digital camera that supports the IrTran-P protocol, otherwise use the Infrared application, see “Send and receive data via infrared” on p. 143), View details, Add to Favorites, Help, and Exit.View imagesNote: When you open Images and you use a memory card, the starting tab is determined by which memory is selected as the Memory in use.1Press or to move from one memory tab to another.

[ 62 ]2To browse the images, press and . 3Press to open an image. When the image is open, you can see the name of the image and the number of images in the folder on the top of the display.When you are viewing an image, pressing or takes you to the next or previous picture in the current folder.You can view animated GIF files in the same way as other images. Animations are played only once. When an animation stops, you will see a fixed image. To view the animation again, you must close it and then reopen it.Options when viewing an image are: Send, Rotate, Zoom in, Zoom out, Full screen, Delete, Rename, View details, Add to Favorites, Help, and Exit.ZOOM IN OR ZOOM OUT1Select Options→ Zoom in or Zoom out. You can see the zooming ratio at the top of the display. See also the section ‘Keyboard shortcuts’ later in this chapter.2Press Back to return to the initial view.Note: The zoom ratio is not stored permanently. You cannot zoom in on GIF animations while they are playing.Full screenWhen you select Options→ Full screen, the panes around the picture are removed so that you can see more of the image. Press to go back to the initial view. Move the focal pointWhen you are zooming or viewing an image in full screen mode, use the scroll key to move the focal point to the left, right, up, or down, so that you can take a closer look at one part of the picture, for example, its upper right corner.

[ 63 ]Camera and imagesRotateSelect Options→ Rotate→ Left to rotate an image 90 degrees counterclockwise or Right to rotate the image clockwise. The rotation status is not stored permanently.KEYBOARD SHORTCUTS• Rotate: - counterclockwise, - clockwise.• Scroll: - up, - down, - left, - right.• Zoom - zoom in, - zoom out. Press and hold to return to the normal view.• - change between full screen and normal view.IMAGE DETAILS VIEWTo view the detailed information about an image, scroll to the image and select Options→ View details. A list of image information appears:Format - JPEG, GIF, PNG, TIFF, MBM, BMP, WBMP, OTA, WMF, Unsupported, or Unknown.Date and Time - when the image was created or saved, n x n- the size of the image in pixels, see the glossary explanation, p. 60.Resolutn. - the size of the image in pixels. See “Image resolutions” on p. 59.Size - in bytes or kilobytes (kB),Color - True color, 65536 colors, 4096 colors, 256 colors, 16 colors, Grayscale, or Black/white.Arrange images and folders• To remove an image or folder, scroll to it and select Options→ Delete.• To rename an image or a folder, scroll to the image or folder you want to rename and select Options→ Rename. Write the new name and press .See “Actions common to all applications” on p. 16 for further information on how to create folders and mark and move items to folders.

[ 64 ]Send imagesYou can send photos or images via different messaging services.1Scroll to the image you want to send and select Options→ Send. 2Then select the method. The choices are Via multimedia, Via e-mail, Via infrared, or Via Bluetooth.• If you select to send the image in an e-mail or a multimedia message, an editor opens. Press to select the recipient(s) from the Contacts directory or write the phone number or e-mail address of the recipient in the To: field. Add text or sound and select Options→ Send. For more information, see “Create and send new messages” on p. 78.• If you want to send the image via infrared or Bluetooth, see “Send data via Bluetooth connection” on p. 139, and “Send and receive data via infrared” on p. 143 for more information.Picture messages folderOptions in the Picture messages folder are: Open, Send, Delete, Mark/Unmark, Rename, View details, Help, and Exit.In the Picture messages folder, you can find graphics sent to you in picture messages.If you want to save a graphic you have received in a picture message, go to Messaging→ Inbox, open the message, and select Options→ Save picture. VIEW PICTURES1Scroll to the picture you want to view and press . The picture opens. Press to view the next picture in the folder.2Press Back to return to the Pictures main view.

[ 65 ]Video recorder7 Video recorderGo to Menu→ Video recorder.Note: Obey all local laws governing the taking of videos. Do not use this feature illegally. Your phone must be switched on to use the Video recorder. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.With the Video recorder you can record video clips, and play video clips stored on your phone or on a memory card. Also, the Video recorder is integrated with the messaging features allowing you to easily send created clips.Video recorder uses shared memory. See “Shared memory” on p. 19. • RECORD A VIDEO CLIPGlossary: 3GPP file format (.3gp) is the standard video file format for Multimedia Messaging.You can record video clips up to 95 KB in size, or approximately 10 seconds in duration. Recorded video clips are in the .3gp format. 1To begin recording open the Video recorder and select Options→ Record and you can see the view to record. 2To start recording press .The progress bar on the bottom of the screen shows you how much recording time remains. To pause recording at any time press .To immediately play the video clip you just recorded, press .The video clip is saved to either the phone’s memory or the memory card, depending on the setting of your Memory in use. See “Set up your Video recorder” on p. 66.

[ 66 ]Options in video clip view of Video recorder are: Play, Record, Send, Delete, Rename, Settings, About product, Help, and Exit. • WATCH A VIDEO CLIPTo watch a video clip from the Video recorder video clip list:1Open the Video recorder.2Scroll to a video clip and select Options→ Play.Once a video clip is playing, you have similar options available to you as when playing a video clip in RealOne Player™. See “RealOne Player™” on p. 67.Send video clipsYou can send video clips by using the Send option from your video clip list.1Scroll to the video clip you want to send and select Options→ Send.2Select Via multimedia, Via e-mail, Via Bluetooth, or Via infrared.Set up your Video recorderYou can define whether you store your video clips in the phone’s memory or on the memory card, if you have one, and how to name your video clips. Select Options→ Settings and one of the following:•Memory in use - Choose between Phone memory and Memory card.•Default video name - Define the default name of your video clips.Example: If you set ‘Holiday’ as the default video clip name, Video recorder will name all the video clips you take ‘Holiday’, ‘Holiday(01)’, ‘Holiday(02)’, and so on, until you change the setting again.

[ 67 ]RealOne Player™8 RealOne Player™Go to Menu→ RealOne Player.With the RealOne Player you can play media files stored in the phone’s memory or on a memory card, play music and video files, or stream live content from the internet. Options in list view are: Play, Open, Rename, Delete, Move to folder, New folder, Mark/Unmark, Send, Add to Favorites, Settings, Help, About product, and Exit.RealOne Player uses shared memory. See “Shared memory” on p. 19.Glossary: Streaming is playing sound or video in real time as it is downloaded from the internet, as opposed to storing it in a local file first. • PLAY MEDIA FILESYou can play any music or video file from the list shown when you start the RealOne Player, or directly from the internet.To play a media file stored in your phone’s memory or memory card, open RealOne Player, scroll to the file and select Options→ Play. Glossary: Media files are video, music or audio clips that you can play on a media player like the RealOne Player. Files with extensions .3gp, .amr, .rm, .ram, .ra, and .rv are supported by the RealOne Player.

[ 68 ]To play a media file directly from the internet:1Select Options→ Open→ URL address.2Enter the URL of the site from which you want to play or stream content.Before your media file or stream begins playing, your phone will connect to the site and load the file.Glossary: Buffering is the temporary storage of a part of your streaming content into the phone’s memory before it is played.Media guideYou can open a browser page that allows you to access a media guide with links to streaming media sites and files.To stream from the Internet:1Configure your RealOne Player default access point (see “Default Access Point setting”, p. 70).2From the main Menu, open Services (XHTML browser). 3In the Bookmarks view, open the Mobile Media Guide bookmark.Note: In the RealOne Player, you can only open an rstp://url address. You cannot open an http://url address.4Find a link to a streaming site that interests you, and select the link.If you are not connected to the server, you will be prompted to connect. Press Yes. Your streaming session begins.· Note: You cannot stream from a site unless you have correctly configured an Access Point in RealOne Player, see “Default Access Point setting”, p. 70. Many service providers require you to use an Internet Access Point (IAP) for your Default Access Point in RealOne Player. Other service providers allow you to use a WAP access point. Contact your service provider for advice and availability.

[ 69 ]RealOne Player™For information about setting up your Nokia 3600 or Nokia 3650 phone for streaming with RealOne Player, please visit http://www.nokia.com/phones/3650/support. This support site is available for the Nokia 3600 as well as the Nokia 3650.Volume control• To increase the volume press , or to decrease the volume press .• To mute the sound press and hold until the indicator is displayed.• To turn on the sound press and hold until you see the indicator. • SEND MEDIA FILESYou can send media files by using the Send option from your video clip list.1Scroll to the file you want to send and select Options→ Send.2Select Via infrared, Via Bluetooth, Via multimedia or Via e-mail. • CHANGE THE SETTINGSTo change the Video settings, select Options→ Video to open the following list of settings:•Video quality - Choose Sharp images to have better picture quality, but slower framerate, or High framerate for faster framerate, but lower picture quality.•Automatic scaling - Choose On to have automatic resizing of the video image.To change the Playback settings, select Options→ Playback to open the following setting: •Repeat - Choose On to have the playing video or audio file restart automatically once it has finished.

[ 70 ]To change the Network settings, select Options→ Network to open the following list of settings:•Default Access Point - As defined in Connection settings, see “Access points” on p. 37.•Bandwidth - Choose Automatic to have the best delivery rate available.•Maximum bandwidth - Choose the maximum bandwidth for streaming content.•Connection time-out - Open the slider view to change the waiting time for the initial server connection on a streaming session.•Server time-out - Open the slider view to change the time allowed for no response from the server.•Highest Port and Lowest Port - Enter the port numbers for streaming. If you are not sure of the numbers, contact your service provider. To change the Proxy settings, select Options→ Proxy to open the following list of settings:•Use Proxy / Host address / Port - Choose whether a proxy is used.Tip: When you select one of the settings a tab view is opened. Press or to move between the different setting tabs. The following icons indicate which setting you are in: for Video for Playback for Network for Proxy

[ 71 ]Messaging9 MessagingGo to Menu→ Messaging.Options in the Messaging main view: Create message, Connect (shown if you have defined settings for the mailbox), or Disconnect (shown if there is an active connection to mailbox), SIM messages, Cell broadcast, Service command, Settings, Help, and Exit.In Messaging you can create, send, receive, view, edit, and organize: • text messages• multimedia messages• e-mail messages• smart messages (special text messages containing data)In addition to these, you can receive messages and data via an infrared or Bluetooth connection, receive service messages, cell broadcast messages, as well as send service commands.Text and multimedia messages use shared memory. See “Shared memory” on p. 19.Note: Before you can create a multimedia message, write an e-mail, or connect to your remote mailbox, you must have the correct connection settings in place. See “Settings for e-mail” on p. 101 and “Settings for multimedia messages” on p. 99.When you open Messaging, you can see the Create message function and a list of default folders:Inbox - contains received messages except e-mail and cell broadcast messages. E-mail messages are stored in the Mailbox. You can read cell broadcast messages by selecting Options→ Cell broadcast.

[ 72 ]My folders - for organizing your messages into folders.Tip: Organize your messages by adding new folders under My folders.Tip: When you have opened one of the default folders, for example, Sent, you can easily move between the folders by pressing to open the next folder (Outbox), or by pressing to open the previous folder (Drafts). Mailbox - When you open this folder, you can either connect to your remote mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See “View e-mail messages when online” and “View e-mail messages when offline” on p. 91 for further information. After you have defined settings for a new mailbox, the name given to that mailbox will replace Mailbox in the main view. See “Settings for e-mail” on p. 101. Drafts - stores draft messages that have not been sent.Outbox - is a temporary storage place for messages waiting to be sent.Sent - stores the last 15 messages that have been sent. To change the number of messages to be saved, see “Settings for the Sent folder” on p. 103.Reports - you can request the system to send you a delivery report of the text messages, smart messages, and multimedia messages you have sent. To turn on delivery report reception, select Options→ Settings→ Text message or Multimedia message, scroll to Receive report, and select Yes.Note: Receiving a delivery report of a multimedia message that has been sent to an e-mail address might not be possible.

[ 73 ]Messaging • MESSAGING - GENERAL INFORMATIONThe message status is always either draft, sent, or received. Messages can be saved to the Drafts folder before they are sent. Messages are temporarily placed to Outbox to wait for sending. After a message has been sent, you can find a copy of the message in the Sent folder. Received and sent messages are in read-only state until you select Reply or Forward, which copies the message to an editor. Note that you cannot forward e-mail messages sent by you.Note: Messages or data that have been sent via an infrared or Bluetooth connection are not saved in the Draft or Sent folders.Open a received messageWhen you receive a message, and the note 1 new message is shown in standby mode. Press Show to open the message. If you have more than one new message, press Show to open the Inbox to see the message headings. To open a message in Inbox, scroll to it and press .Add a recipient to a messageWhen you create a message, there are several ways to add a recipient: • Add recipients from the Contacts directory. To open the Contacts directory, press or in the To: or Cc: fields, or select Options→ Add recipient. Scroll to a contact and press to mark it. You can mark several recipients at a time. Press OK to return to the message. The recipients are listed in the To: field and automatically separated with a semicolon (;).• Write the phone number or e-mail address of the recipient in the To: field.• Copy the recipient information from another application and then paste it to the To: field. See “Copy text” on p. 78.Press to the left of the cursor if you want to delete a recipient.

[ 74 ]Note: If you write many phone numbers or e-mail addresses in the To: field, you must remember to add a semicolon (;) between each item to separate them from each other. When you retrieve recipients from the Contacts directory, the semicolon is added automatically.Example: 214 123 456; 972 456 876Sending optionsTo change how a message is sent, select Options→ Sending options when you are editing a message. When you save the message, its sending settings are also saved. • WRITE TEXTYou can key in text in two different ways, using the method traditionally used in mobile phones or another method called predictive text input.Icons: and indicate the selected case. means that the first letter of the next word is written in uppercase, and all other letters are automatically written in lowercase. indicates number mode.Use traditional text inputThe indicator is shown on the top right of the display when you are writing text using traditional text input.• Press a number key ( to ), repeatedly until the desired character appears. Note, that there are more characters available for a number key than are printed on the key.• To insert a number, press and hold the number key. • To switch between letter and number mode, press and hold .• If the next letter is located on the same key as the present one, wait until the cursor appears (or press to end the time-out period), and then key in the letter.• If you make a mistake, press to remove a character. Press and hold to clear more than one character.

[ 75 ]Messaging• The most common punctuation marks are available under . Press repeatedly to reach the desired punctuation mark.• Press to open a list of special characters. Use the scroll key to move through the list and press OK to select a character.• To insert a space, press . • To move the cursor to the next line, press three times.• To switch between upper and lower case, press . Use predictive text inputTip: To set predictive text input on or off, press twice quickly when writing text.To activate predictive text input, press and select Predictive text on. This will activate predictive text input for all editors in the phone. The indicator is shown at the top of the display.Write the desired word by pressing the keys to . Press each key only once for one letter. The word changes after every key press.Note: Do not pay attention to what appears on the display. The word match is evolving. Wait until you have keyed in the whole word before you check the result.For example, to write ‘Nokia’ when English dictionary is selected, press: for N for o for k for i for aAs you can see, the word suggestion changes after each key press. When you have finished the word, check that it is correct.

[ 76 ]• If the word is correct, you can confirm it by pressing or by pressing to insert a space. The underlining disappears and you can begin to write a new word.• If the word is not correct, you have the following options:• Press repeatedly to view the matching words the dictionary has found one by one.• Press and select Predictive text→ Matches to view a list of matching words. Scroll to the word you want to use and press to select it.•If the ? character is shown after the word, the word you intended to write is not in the dictionary. To add a word to the dictionary, press Spell, key in the word (max. 32 letters) using traditional text input, and press Save. The word is added to the dictionary. When the dictionary becomes full, a new word replaces the oldest added word.•To remove the ? and clear characters one by one from the word, press .TIPS ON USING PREDICTIVE TEXT INPUT• To erase a character, press . Press and hold to clear more than one character.• To change between the different character cases Abc, abc, and ABC, press . Note that if you press quickly twice the predictive text input is turned off.• To insert a number in letter mode, press and hold the desired number key, or press and select Insert number, key in the numbers you want, and press OK.To switch between letter and number mode, press and hold .• The most common punctuation marks are available under . Press and then repeatedly to reach the desired punctuation mark.• Press and hold to open a list of special characters. Use the scroll key to scroll through the list and press OK to select a character. Or press and select Insert symbol.

[ 77 ]MessagingTip: The predictive text input will try to guess which commonly used punctuation mark (.,?!‘) is needed. The order and availability of the punctuation marks depend on the language of the dictionary.• Press repeatedly to view the matching words the dictionary has found one by one.You can also press , select Predictive text and select:•Matches - to view a list of words that correspond to your key presses. Scroll to the desired word and press the .•Insert word - to add a word (max. 32 letters) to the dictionary by using traditional text input. When the dictionary becomes full, a new word replaces the oldest added word.•Edit word - to open a view where you can edit the word, available only if the word is active (underlined).Write compound wordsWrite the first half of a compound word and confirm it by pressing . Write the last part of the compound word and complete the compound word by pressing to add a space.Turn off predictive textPress and select Predictive text→ Off to turn predictive text input off for all editors in the phone.Editing optionsWhen you press , the following options appear (depending on the editing mode and situation you are in): •Predictive text (predictive text input), Alpha mode (traditional text input), Number mode•Cut, Copy - available only if text has been selected first. •Paste - available only when text has been either cut or copied to the clipboard.•Insert number, Insert symbol.•Writing language - changes the input language for all editors in the phone. See “Phone settings” on p. 31.

[ 78 ] •COPY TEXTIf you want to copy text to the clipboard, the following are the easiest methods: 1To select letters and words, press and hold . At the same time, press or . As the selection moves, text is highlighted.To select lines of text, press and hold . At the same time press or . 2To end the selection, stop pressing the scroll key.3To copy the text to clipboard, while still holding , press Copy. 4Or, release and then press it once to open a list of editing commands, for example, Copy or Cut.5If you want to remove the selected text from the document, press .6To insert the text into a document, press and hold and press Paste. Or, press once and select Paste. • CREATE AND SEND NEW MESSAGESYou can start to create a message in two ways:• Select New message→ Create:→ Text message, Multimedia message, or E-mail in the Messaging main view.• Start to create a message from an application that has the option Send. In this case the file that was selected (such as an image or text) is added to the message.Note: When sending messages, your phone may display the words Message Sent. This is an indication that the message has been sent by your phone to the message center programmed into your phone. This is not an indication that the message has been received at the intended destination. For more details about the messaging services, check with your service provider.

[ 79 ]Messaging • TEXT MESSAGESOptions in the text message editor are: Send, Add recipient, Insert, Delete, Message details, Sending options, Help, and Exit.1Select New message. A list of message options opens.2Select Create:→ Text message. The editor opens with the cursor in the To: field. 3Press to select recipient(s) from the Contacts directory or write the phone number of the recipient. Press to add a semicolon (;) to separate each recipient. Press to move to the message field.4Write the message. Note: Your phone supports sending multiple text messages at the same time; therefore, the normal 160 characters limit for one text message can be exceeded. If your text exceeds 160 characters, it will be sent in two or more messages and message sending may cost you more.In the navigation bar, you can see the message length indicator counting backwards from 160. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages.5To send the message, select Options→ Send or press .Smart messagesSmart messages are special text messages that can contain data. You can send smart messages such as:• Picture messages• Business cards containing contact information in generic (vCard) format• Calendar notes (vCalendar format)From the text message editor, you may crate a smart message containing a picture (see “Create and send picture messages” on p. 80). For other types of smart messages, see “Send contact information” on p. 55, “Send calendar entries” on p. 112, and “Send bookmarks” on p. 125.Tip: You can also receive ringing tones, operator logos, or settings from service providers. See “Receive smart messages” on p. 88.

[ 80 ]Create and send picture messagesYour phone allows you to send and receive picture messages. Picture messages are text messages that contain small black-and-white graphics. There are several default pictures available in the Picture msgs. folder in Images. Note: This function can be used only if it is supported by your service provider. Only phones that offer picture message features can receive and display picture messages.To send a picture message:1There are two possibilities. Choose one of the following:• Select Messaging→ New message→ Create:→ Text message, and then select Options→ Insert→ Picture.•Go to Images→ Picture msgs. and select a picture to be sent. Select Options→ Send.2Enter recipient information and add text.3Select Options→ Send or press .Note: Each picture message is made up of several text messages. Therefore, sending one picture message may cost more than sending one text message. • MULTIMEDIA MESSAGESA multimedia message can contain text, images, and either video or sound clips.Note: This function can be used only if it is supported by your service provider. Only devices that offer compatible multimedia message or e-mail features can receive and display multimedia messages. Devices that don’t have these features may receive details of a link to a web page.

[ 81 ]MessagingSettings needed for multimedia messagingOptions in the multimedia message editor are: Send, Add recipient, Insert, Preview message, Objects, Remove, Delete, Message details, Sending options, Help, and Exit.You may receive the settings as a smart message from your service provider. See “Receive smart messages” on p. 88. For availability of and subscription to data services, please contact your service provider.1Go to Settings→ Connection settings→ Access points and define the settings for a multimedia messaging access point:Connection name - Give a descriptive name for the connection.Session mode - Select a data connection type: GSM data, High speed GSM, or GPRS.Gateway IP address - enter the address.Example: Domain names such as www.nokia.com can be translated into IP addresses like 192.100.124.195.Homepage - enter the address of the multimedia messaging center.• If you selected GSM data or High speed GSM, fill in Dial-up number - a phone number for the data call. • If you selected GPRS, fill in Access point name - the name given to you by your service provider.For further information on different data connections, see also “Connection settings” on p. 35.2Go to Messaging→ Options→ Settings→ Multimedia message. 3Open Preferred connection and select the access point you created to be used as the preferred connection. See also “Settings for multimedia messages” on p. 99.

[ 82 ]Set up the messaging storeThe messaging store defines whether the phone’s memory or the memory card are used as default. To define the messaging store:Messaging→ Options→ Settings→ Messaging store and select either the phone’s memory or the memory card, if one is used.Create multimedia messagesWhen you are sending a multimedia message to any phone other than the Nokia 3600 or Nokia 3650, it is recommended to use a smaller image size and a sound clip that is no longer than 15 seconds. The default setting is Image size: Small. If you want to check the image size setting, go to Messaging→ Options→ Settings→ Multimedia message or select Options→ Sending options when you are creating a multimedia message. When you are sending a multimedia message to an e-mail address or another Nokia 3600 or Nokia 3650, select Options→ Sending Options→ Image size →Large when you are creating a multimedia message.1In Messaging, select New message→ Create:→ Multimedia message and press .2Press to select the recipient(s) from the Contacts directory or write the phone number or e-mail address of the recipient in the To: field. Add a semicolon (;) to separate each recipient. Press to move to the next field.3You can add the different objects of the multimedia message in any order you want:• To add an image, select Options→ Insert→ Image or New image.• To add a sound, select Options→ Insert→ Sound clip or New sound clip. When sound has been added, the icon is shown in the navigation bar.• To add video, select Options→ Insert→ Video clip.• To write text, press .

[ 83 ]Messaging• If you select Insert→ Image, Sound clip, Video clip, or Template, a list of items opens. Scroll to the item you wish to add and press Select.Note: If you chose Image, first you need to select whether the image is stored in the phone’s memory or the memory card, if one is used.• If you select Insert→ New image, Camera opens and you can take a new picture. Press Remove to remove the picture and take another instead.• If you select Insert→ New sound clip, Recorder opens and you can record a new sound. The new photo or sound is automatically saved and a copy is inserted in the message.Note: A multimedia message can contain only one photo and one sound or video clip.4To send the message, select Options→ Send or press .Preview a multimedia messageTo see what the multimedia message will look like, select Options→ Preview message.Remove object from a multimedia messageTo remove a multimedia object, select Options→ Remove→ Image Video clip or Sound clip. Press to remove text.Work with different multimedia objectsTo see all the different media objects included in a multimedia message, open a multimedia message and select Options→ Objects to open the Objects view. In the Objects view, you can change the order of the different objects, delete objects, or open an object in a corresponding application. Options in the Objects view are: Open, Insert, Place image first / Place text first, Remove, Help, and Exit.

[ 84 ] • E-MAIL MESSAGESBefore you can send, receive, retrieve, reply to, and forward e-mail messages, you must:• Configure an Internet Access Point (IAP) correctly. See “Connection settings” on p. 35.• Define your e-mail settings correctly. See “Settings for e-mail” on p. 101.Note: Follow the instructions given by your remote mailbox and Internet Service Provider.Write and send e-mail messagesOptions in the e-mail editor are: Send, Add recipient, Insert, Attachments, Delete, Message details, Sending options, Help, and Exit.1Select New message→ Create:→ E-mail. The editor opens.2Press to select the recipient(s) from the Contacts directory or write the e-mail address of the recipient in the To: field. Add a semicolon (;) to separate each recipient. 3If you want to send a copy of your e-mail to someone, write the address in the Cc: field. Press to move to the next field. 4Write the message. 5If you want to add an attachment to the e-mail, select Options→ Insert→ Image, Sound clip, Video clip, or Note. • will appear in the navigation bar to indicate that the e-mail has an attachment. Template adds pre-written text to the e-mail.• You can also add an attachment to an e-mail by selecting Options→ Attachments in an open e-mail. The Attachments view opens where you can add, view, and remove attachments.• To remove an attachment, scroll to the attachment and select Options→ Remove.Note: If you choose to attach an Image, first you need to select whether the image is stored in the phone’s memory or the memory card, if one is used.

[ 85 ]Messaging6To send the e-mail, select Options→ Send or press . Note: E-mail messages are automatically placed in Outbox before sending. In case something goes wrong while the phone is sending the e-mail, the e-mail is left in Outbox with the status Failed.Tip: If you want to send files other than photos, sounds, and notes as attachments, open the appropriate application and select the option Send→ Via e-mail, if available.Attachment view - add and remove attachmentsTo add an attachment to an e-mail, select Options→ Attachments in an open e-mail. The Attachments view opens where you can add, view, and remove attachments.• To add an attachment, select Options→ Insert→ Image, Sound clip, Video clip, or Note. A list of items opens. Scroll to the one you want to add and press OK. will appear in the navigation bar to indicate that the e-mail has an attachment.Note: If you choose Image, first you need to select whether the image is stored in the phone’s memory or the memory card, if one is used.• To remove an attachment, scroll to the attachment and select Options→ Remove. •INBOXOptions in Inbox are: Open, Create message, Delete, Message details, Move to folder, Move to phone memory (shown if you have defined the memory card as the messaging store), Move to memory card (shown if you have defined the phone’s memory as the messaging store), Mark/Unmark, Help, and Exit.Messages and data can be received via text message, multimedia service, infrared connection, or Bluetooth connection. When there are unread messages in Inbox, the icon changes to .

[ 86 ]In Inbox, unread messages appear in bold. The message icons tell you what kind of a message it is. Here are some of the icons that you may see:View messagesTo open a message, scroll to the message and press . Use the scroll key to move up and down in the message. Press or to move to the previous or next message in the folder. Options in different message viewersThe available options depend on the type of message you have opened for viewing:•Save picture - saves the picture to Images→ Picture msgs.•Reply - copies the address of the sender to the To: field. Select Reply→ To all - copies the address of the sender and Cc field recipients to the new message.•Forward - copies the message contents to an editor.•Call - call by pressing .•View image - allows you to view and save the image.•Play sound clip - allows you to listen to the sound in the message.•Objects - shows you a list of all the different multimedia objects in a multimedia message.•Attachments - shows you a list of files sent as e-mail attachments.for an unread text messagefor an unread smart messagefor an unread multimedia messagefor an unread service messagefor data received via infraredfor data received via Bluetoothfor an unknown message type

[ 87 ]Messaging•Message details - shows detailed information about a message.•Move to folder /Copy to folder - allows you to move or copy message(s) to My folders, Inbox, or other folders you have created. See “Move items to a folder” on p. 17.•Add to Contacts - allows you to copy the phone number or e-mail address of the message sender to the Contacts directory. Choose whether you want to create a new contact card or add the information to an existing contact card.•Find - Searches the message for phone numbers, e-mail addresses, and Internet addresses. After the search, you can make a call or send a message to the found number or e-mail address, or save the data to Contacts or as a bookmark.View multimedia messagesYou can recognize multimedia messages by their icon .To open a multimedia message, scroll to it and press . You can see an image, read a message and hear a sound, simultaneously. If sound is playing, press or to increase or decrease the sound volume. If you want to mute the sound, press Stop.MULTIMEDIA MESSAGE OBJECTSOptions in the Objects view are: Open, Save, Send, Call, and Exit.To see what kinds of media objects have been included in the multimedia message, open the message and select Options→ Objects. In the Objects view you can view files that have been included in the multimedia message. You can choose to save the file in your phone or to send it, for example, via infrared to another device.To open a file, scroll to it and press the .Warning: Multimedia message objects may contain viruses or otherwise be harmful to your phone or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender. For more information, see “Certificate management” on p. 45.

[ 90 ]VIEWING SERVICE MESSAGES IN INBOX1In Inbox, scroll to a service message ( ) and press .2To download or view the service, press Download message. The note Downloading message is displayed. The phone starts to make a data connection, if needed. 3Press Back to return to Inbox.VIEWING SERVICE MESSAGES IN THE BROWSERWhen you are browsing, select Options→ Read service msgs. to download and view new service messages. •MY FOLDERSOptions in My folders are: Open, New message, Delete, Message details, Move to folder, New folder, Rename, Help, and Exit.In My folders you can organize your messages into folders, create new folders, and rename and delete folders. Select Options→ Move to folder, New folder, or Rename folder. For more information, see “Move items to a folder” on p. 17. Templates folderYou can use text templates to avoid rewriting messages that you send often. To create a new template, select Options→ New template. • REMOTE MAILBOXSelect New message→ Create:→ E-mail or Mailbox in the Messaging main view. If you have not set up your e-mail account, you will be prompted to do so. See “Settings for e-mail” on p. 101.When you open this folder, you can connect to your remote mailbox to:• Retrieve new e-mail headings or messages. • View your previously retrieved e-mail headings or messages offline. Tip: The Settings wizard program included in the PC Suite can help you configure access point and mailbox settings. You can also copy existing settings, for example, from your computer to your phone. See the CD-ROM supplied in the sales package.

[ 91 ]MessagingWhen you create a new mailbox, the name you give to the mailbox automatically replaces Mailbox in the Messaging main view. You can have several mailboxes (max. six).Open the mailboxWhen you open the mailbox, you can choose whether you want to view the previously retrieved e-mail messages and e-mail headings offline or connect to the e-mail server. When you scroll to your mailbox and press , the phone asks you if you want to Connect to mailbox?. Select Yes to connect to your mailbox or No to view previously retrieved e-mail messages offline.Another way to start a connection is to select Options→ Connect.VIEW E-MAIL MESSAGES WHEN ONLINEWhen you are online, you are continuously connected to a remote mailbox via a data call or a packet data connection. See also “Data connection indicators” on p. 13, “GSM data calls” on p. 35, and “GPRS Packet data” on p. 36.Note: If you are using the POP3 protocol, e-mail messages are not updated automatically in online mode. To see the newest e-mail messages, you need to disconnect and then make a new connection to your mailbox.Options when viewing e-mail headings are: Open, New message, Connect /Disconnect, Retrieve, Delete, Message details, Copy, Mark/Unmark, Help, and Exit.VIEW E-MAIL MESSAGES WHEN OFFLINEWhen you view e-mail messages offline, your phone is not connected to the remote mailbox. This mode may help you to save on connection costs.To view e-mail messages offline, you must first retrieve e-mail messages from your mailbox, see the next section. After you have retrieved the e-mail messages to your phone, to end the data connection, select Options→ Disconnect.

[ 92 ]Now you can continue reading the retrieved e-mail headings and/or the retrieved e-mail messages offline. You can write new e-mail messages, reply to the retrieved e-mail messages, and forward e-mail messages. You can order the e-mail messages to be sent the next time you connect to the mailbox. When you open Mailbox the next time and you want to view and read the e-mail messages offline, answer No to the Connect to mailbox? query.Retrieve e-mail messages from the mailboxIf you are offline, select Options→ Connect to start a connection to a remote mailbox.The remote mailbox view is similar to the Inbox folder in Messaging. You can move up and down in the list by pressing or . The following icons are used to show the status of the e-mail: - new e-mail (offline or online mode). The content has not been retrieved from the mailbox to your phone (the arrow in the icon is pointing outwards). - new e-mail, the content has been retrieved from the mailbox (arrow pointing inwards). - for e-mail messages that have been read. - for e-mail headings that have been read and the message content has been deleted from the phone.1When you have an open connection to a remote mailbox, select Options→ Retrieve, •New - to retrieve all new e-mail messages to your phone.•Selected - to retrieve only the e-mail messages that have been selected. Use the Mark/Unmark→ Mark / Unmark commands to select messages one by one. See “Mark multiple items” on p. 17 for information on how to select many items at the same time.

[ 93 ]Messaging•All - to retrieve all messages from the mailbox. To cancel retrieving, press Cancel.After you have retrieved the e-mail messages, you can continue viewing them online. 2Select Options→ Disconnect to close the connection and to view the e-mail messages offline.COPY E-MAIL MESSAGES TO ANOTHER FOLDER If you want to copy an e-mail from the remote mailbox to a folder under My folders, select Options→ Copy. Select a folder from the list and press OK.Open e-mail messagesWhen you are viewing e-mail messages either in online or offline mode, scroll to the e-mail you want to view and press to open it. If the e-mail message has not been retrieved (arrow in the icon is pointing outwards) and you are offline and select Open, you will be asked if you want to retrieve this message from the mailbox. Note that the data connection is left open after the e-mail has been retrieved. Select Options→ Disconnect to end the data connection.Options when viewing an e-mail message are: Reply, Forward, Delete, Attachments, Message details, Move to folder, Add to Contacts, Find, Help, and Exit.Disconnect from mailboxWhen you are online, select Options→ Disconnect to end the data call or GPRS connection to the remote mailbox. See also “Data connection indicators” on p. 13.View e-mail attachmentsOptions in the Attachments view are: Open, Retrieve, Save, Send, Delete, Help, and Exit.

[ 94 ]Open a message that has the attachment indicator and select Options→ Attachments to open the Attachments view. In the Attachments view, you can retrieve, open, or save attachments. You can also send attachments via infrared or Bluetooth.Warning: E-mail attachments may contain viruses or otherwise be harmful to your phone or PC. Do not open any attachment if you are not sure of the trustworthiness of the sender. For more information, see “Certificate management” on p. 45.Retrieve attachments to the phoneIf the attachment has a dimmed indicator, it has not been retrieved to the phone. To retrieve the attachment, scroll to it and select Options→ Retrieve.Note: If your mailbox uses the IMAP 4 protocol, you can decide whether to retrieve e-mail headings only, messages only, or messages and attachments. With the POP3 protocol, the options are e-mail headings only or messages and attachments. For further information, see “Settings for e-mail” on p. 101.Tip: To save memory, you can remove attachments from an e-mail while retaining them on the e-mail server. Select Options→ Delete in the Attachments view.Open an attachment1In the Attachments view, scroll to an attachment and press to open it. • If you are online, the attachment is retrieved directly from the server and opened in the corresponding application.• If you are offline, the phone asks if you want to retrieve the attachment to the phone. If you answer Yes, a connection to the remote mailbox is started.2Press Back to return to the e-mail viewer.Tip: Supported image formats are listed on p. 57. To see a list of other file formats supported by the Nokia 3600 and Nokia 3650, see the product information at www.nokia.com.

[ 95 ]MessagingSAVE ATTACHMENTS SEPARATELYTo save an attachment, select Options→ Save in the Attachments view. The attachment is saved in the corresponding application. For example, sounds can be saved in Recorder and text files (.TXT) in Notes. Attachments such as images can be saved on a memory card, if one is used.Delete e-mail messagesTo delete an e-mail from the phone while still retaining it in the remote mailbox, select Options→ Delete → Phone only.Note: The phone mirrors the e-mail headings in the remote mailbox. So, although you delete the message content, the e-mail heading stays in your phone. If you want to remove the heading as well, you have to first delete the e-mail message from your remote mailbox and then make a connection from your phone to the remote mailbox again to update the status.To delete an e-mail from both the phone and the remote mailbox, select Options→ Delete→ Phone and server.Note: If you are offline, the e-mail will be deleted first from your phone. During the next connection to the remote mailbox, it will be automatically deleted from the remote mailbox. If you are using the POP3 protocol, messages marked to be deleted are removed only after you have closed the connection to the remote mailbox.UNDELETE E-MAIL MESSAGES WHEN OFFLINETo cancel deleting an e-mail from both the phone and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options→ Undelete. • OUTBOXThe Outbox is a temporary storage place for messages waiting to be sent. Status of the messages in Outbox is displayed as follows:•Sending - A connection is being made and the message is being sent.•Waiting/Queued - For example, if there are two similar types of messages in Outbox, one of them is waiting until the first one is sent.

[ 97 ]Messaging• the topic number, topic name, and whether it has been flagged ( ) for follow-up. You will be notified when messages belonging to a flagged topic have arrived.Note: A packet data (GPRS) connection may prevent cell broadcast reception. Contact your service provider for the correct GPRS settings. For further information on the GPRS settings, see “GPRS Packet data” on p. 36. • SERVICE COMMAND EDITORIn the Messaging main view, select Options→ Service command.You can send service requests, such as activation commands for system services (also known as USSD commands), to your service provider. For more information, contact your service provider. To send a request:• in standby mode or when you have an active call, key in the command number(s) and press Send, or• if you need to enter letters as well as numbers, select Messaging→ Options→ Service command. • MESSAGING SETTINGSThe Messaging settings are divided into groups according to the different message types. Scroll to the settings you want to edit and press .Settings for text messagesOptions when editing text message center settings are: New msg. center, Edit, Delete, Help, and Exit.Go to Messaging and select Options→ Settings→ Text message to open the following list of settings:•Message centers - Lists all the text message service centers that have been defined. See “Add a new text message center” on p. 98.•Msg. center in use (Message center in use)- Defines which message center is used for delivering text messages and smart messages such as picture messages.

[ 98 ]•Receive report (delivery report)- When this system service is set to Yes, the status of the sent message (Pending, Failed, Delivered) is shown in the Log. •Message validity - If the recipient of a message cannot be reached within the validity period, the message is removed from the text message service center. Note that the system must support this feature. Maximum time is the maximum amount of time allowed by the system.•Message sent as - The options are Text, Fax, Paging, and E-mail. For further information, contact your service provider.Note: Change this option only if you are sure that your service center is able to convert text messages into these other formats.•Preferred connection - You can send text messages via the normal GSM system or via GPRS, if supported by the system. See “GPRS Packet data” on p. 36.•Reply via same ctr. (system service) - By setting this option to Yes, if the recipient replies to your message, the return message is sent using the same text message service center number. Note that this may not work between all operators.ADD A NEW TEXT MESSAGE CENTER1Open Message centers and select Options→ New msg. center.2Press , write a name for the service center and press OK.3Press , press and write the number of the text message service center (Must be defined). Press OK. You need the message center number to send text and picture messages. You can get the number from your service provider. To use the new settings, go back to the settings view and scroll to Msg. center in use. Press and select the new service center.

[ 99 ]MessagingSettings for multimedia messagesGo to Messaging and select Options→ Settings→ Multimedia message to open the following list of settings:•Preferred connection (Must be defined) - Select which access point is used as the preferred connection for the multimedia message center. See “Settings for multimedia messages” on p. 99.Note: If you receive multimedia message settings in a smart message and save them, the received settings are automatically used for the Preferred connection. See “Receive smart messages” on p. 88.•Secondary conn. - Select which access point is used as the secondary connection for the multimedia message center. Note: Both Preferred connection and Secondary conn. must have the same Homepage setting pointing to the same multimedia service center. Only the data connection is different.Example: If your preferred connection uses a packet data connection, you may want to use high-speed data or data call for the secondary connection. This way you are able to send and receive multimedia messages even when you are not in a system that supports packet data. For availability of and subscription to data services, please contact your service provider. See also “Data connections and access points” on p. 35.•Multimedia reception - Select:•Only in home net. - if you want to receive multimedia messages only when you are in your home system. When you are outside your home system, multimedia message reception is turned off.•Always on - if you want to receive multimedia messages always. •Off - if you do not want to receive multimedia messages or advertisements at all.Note: When you are outside your home system, sending and receiving multimedia messages may cost more. If the settings Only in home net. or Always on have been selected, your phone can make an active data call or GPRS connection without your knowledge.

[ 100 ]•On receiving msg. - Select: •Retr. immediately - if you want the phone to retrieve multimedia messages instantly. If there are messages with Deferred status, they will be retrieved as well.•Defer retrieval - if you want the multimedia messaging center to save the message to be retrieved later. To retrieve the message later, set On receiving msg. to Retr. immediately.•Reject message - if you want to reject multimedia messages. The multimedia messaging center will delete the messages.•Allow anon. messages - Select No, if you want to reject messages coming from an anonymous sender.•Receive adverts - Define whether you want to receive multimedia message advertisements or not.•Reports - Set to Yes, if you want the status of the sent message (Pending, Failed, Delivered) to be shown in the Log. When set to No, only the status Delivered is shown in the Log. See “Log - Call log and general log” on p. 25.•Deny report sending - Choose Yes, if you do not want your phone to send delivery reports of received multimedia messages.•Message validity - If the recipient of a message cannot be reached within the validity period, the message is removed from the multimedia messaging center. Note that the system must support this feature. Maximum time is the maximum amount of time allowed by the system.•Image size - Define the size of the image in a multimedia message. The options are: Small (max. of 160*120 pixels) and Large (max. 640*480 pixels). •Speaker - Choose Loudspeaker or Normal, if you want the sounds in a multimedia message to be played through the loudspeaker or the earpiece. For more information, see “Loudspeaker” on p. 18.

[ 101 ]MessagingSettings for e-mailGo to Messaging and select Options→ Settings→ E-mail. Options when editing e-mail settings are: Editing options, New mailbox, Delete, Call, and Exit.Open Mailbox in use to select which mailbox you want to use.Settings for MailboxesSelect Mailboxes to open a list of mailboxes that have been defined. If no mailboxes have been defined, you will be prompted to do so. The following list of settings is shown:•Mailbox name - Write a descriptive name for the mailbox.•Access point in use (Must be defined) - The Internet Access Point (IAP) used for the mailbox. Choose an IAP from the list. For more information on how to create an IAP, see also “Connection settings” on p. 35.•My mail address (Must be defined) - Write the e-mail address given to you by your service provider. The address must contain the @ symbol. Replies to your messages are sent to this address.•Outgoing mail server (Must be defined) - Write the IP address or host name of the computer that sends your e-mail.•Send message - Define how e-mail is sent from your phone. Immediately - A connection to the mailbox is started immediately after you have selected Send. During next conn. - E-mail is sent when you connect to your remote mailbox the next time.•Send copy to self - Select Yes to save a copy of the e-mail to your remote mailbox and to the address defined in My mail address.•Include signature - Select Yes if you want to attach a signature to your e-mail messages and to start to write or edit a signature text.•User name: - Write your user name, given to you by your service provider.•Password: - Write your password. If you leave this field blank, you will be prompted for the password when you try to connect to your remote mailbox.

[ 102 ]•Incoming mail server: (Must be defined) - The IP address or host name of the computer that receives your e-mail.•Mailbox type: - Defines the e-mail protocol your remote mailbox service provider recommends. The options are POP3 and IMAP4.Note: This setting can be selected only once and cannot be changed if you have saved or exited from the mailbox settings.•Security - Used with the POP3, IMAP4, and SMTP protocols to secure the connection to the remote mailbox.•APOP secure login - Used with the POP3 protocol to encrypt the sending of passwords to the remote e-mail server. Not shown if IMAP4 is selected for Mailbox type:.•Retrieve attachment (not shown if the e-mail protocol is set to POP3) - To retrieve e-mail with or without attachments.•Retrieve headers - To limit the number of e-mail headers you want to retrieve to your phone. The options are All and User defined. Used with IMAP4 protocol only.Settings for service messagesWhen you go to Messaging and select Options→ Settings→ Service message, the following list of settings opens:•Service messages - Choose whether or not you want to receive service messages.•Authentic. needed - Choose if you want to receive service messages only from authorized sources. Settings for Cell broadcastCheck with your service provider to see if Cell broadcast is available and what topics and numbers are available. Go to Messaging→ Options→ Settings→ Cell broadcast to change the settings: Reception - On or Off. •Language - All allows you to receive cell broadcast messages in every possible language. Selected allows you to choose in which languages you wish to receive cell broadcast messages. If the language you want could not be found in the list, select Other.

[ 103 ]Messaging•Topic detection - If you receive a message that does not belong to any of the existing topics, Topic detection→ On allows you to save the topic number automatically. The topic number is saved to the topic list and shown without a name. Choose Off if you do not want to save new topic numbers automatically. Settings for the Sent folderGo to Messaging and select Options→ Settings→ Sent folder to open the following list of settings:•Save sent messages - Choose if you want to save a copy of every text message, multimedia message, or e-mail that you have sent to the Sent items folder.•No. of saved msgs. - Define how many sent messages will be saved to the Sent items folder at a time. The default limit is 20 messages. When the limit is reached, the oldest message is deleted.•Memory in use - Define memory store. Choices are phone’s memory or memory card, if one is used.

[ 106 ]11 Fav ori tesGo to Menu→ Favorites.You can use Favorites to store shortcuts, links to your favorite photos, video clips, notes, Recorder sound files, browser bookmarks, and saved browser pages.The default shortcuts are: - opens the Notes editor - opens the Calendar with the current date selected - opens the Messaging Inbox Options in the Favorites main view are: Open, Edit shortcut name, Delete shortcut, Move, List view / Grid view, Help, and Exit. • ADD SHORTCUTSShortcuts can be added only from the individual applications. Not all applications have this functionality. 1Open the application and scroll to the item that you want to add as a shortcut to Favorites.2Select Options→ Add to Favorites and press OK.Note: A shortcut in Favorites is automatically updated if you move the item it is pointing to, for example, from one folder to another.

[ 107 ]Favorites • SHORTCUT OPTIONS•To open a shortcut, scroll to the icon and press . The file is opened in the corresponding application.•To delete a shortcut, scroll to the shortcut you want to remove and select Options→ Delete shortcut. Removing a shortcut does not affect the file it is referring to.•To change the shortcut heading, select Options→ Edit shortcut name. Write the new name. This change affects only the shortcut, not the file or item the shortcut refers to.

[ 108 ]1 2 C a l e n d a r a n d T o - d o Go to Menu→ Calendar.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Options when editing a calendar entry are: Delete, Send, Help, and Exit.In Calendar, you can keep track of your appointments, meetings, birthdays, anniversaries, and other events. You can also set a calendar alarm to remind you of upcoming events.Calendar uses shared memory. See “Shared memory” on p. 19. • CREATE CALENDAR ENTRIES1Select Options→ New entry and select from the following options: •Meeting to remind you of an appointment that has a specific date and time. •Memo to write a general entry for a day. •Anniversary to remind you of birthdays or special dates. Anniversary entries are repeated every year.2Fill in the fields, see the “Calendar entry fields” on p. 109. Use the scroll key to move between fields. Press to change between upper and lower case.3To save the entry, press Done.Edit calendar entries1In the Day view, scroll to the entry and press to open it.2Edit the entry fields and press Done.

[ 109 ]Calendar and To-do• If you are editing a repeated entry, choose how you want the changes to take effect: All occurrences - all repeated entries are changed / This entry only - only the current entry will be changed.Delete calendar entries• In the Day view, scroll to the entry you want to delete and select Options→ Delete or press . Press OK to confirm.• If you are deleting a repeated entry, choose how you want the change to take effect: All occurrences - all repeated entries are deleted / This entry only - only the current entry will be deleted.Example: Your weekly class has been cancelled. You have set the calendar to remind you every week. Choose This entry only and the calendar will remind you again next week.Calendar entry fields•Subject / Occasion - Write a description of the event. •Location - the place of a meeting, optional.•Start time, End time, Start date, and End date.•Alarm - Press to activate the fields for Alarm time and Alarm date.•Repeat - Press to change the entry to be repeating. Shown with in the Day view.Example: The repeat function is handy if you have a recurring event, a weekly class, a biweekly meeting, or a daily routine you need to remember.• Repeat until - You can set an ending date for the repeated entry, for example, the ending date of a weekly course you are taking. This option is shown only if you have selected to repeat the event.• Synchronization - If you select Private, after synchronization the calendar entry can be seen only by you and it will not be shown to others with online access to view the calendar. This is useful when, for example, you synchronize your calendar on a compatible computer at work. If you select Public, the calendar entry is shown to others who have access to view your calendar online. If you select None, the calendar entry will not be copied to your PC when you synchronize your calendar.

[ 110 ]Calendar viewsMONTH VIEWIn the Month view, one row equals one week. The current date is underlined. Dates that have calendar entries are marked with a small triangle at the right bottom corner. There is a frame around the currently selected date. • To open the Day view, scroll to the date you want to open and press • To go to a certain date, select Options→ Go to date. Write the date and press OK.Tip: If you press in Month, Week, or Day views, the current date is automatically highlighted.Calendar entry icons in Day and Week viewsSynchronization icons in Month viewMeeting Private Memo PublicAnniversary NoneThe day has more than one view

[ 111 ]Calendar and To-doWEEK VIEWIn the Week view, the calendar entries for the selected week are shown in seven day boxes. The current day of the week is underlined. Memos and Anniversaries are placed before 8 AM. Meeting entries are marked with colored bars according to starting and ending times.To view or edit an entry, scroll to the cell that has an entry and press to open the Day view, then scroll to the entry and press to open it.Options in the different calendar views are: Open, New entry, Week view/Month view, Delete, Go to date, Send, Settings, Help, and Exit.DAY VIEWIn the Day view, you can see the calendar entries for the selected day. The entries are grouped according to their starting time. Memos and Anniversaries are placed before 8 AM. • To open an entry for editing, scroll to it and press .• Press to go to the next day or press to go to the previous day.SETTINGS FOR CALENDAR VIEWSSelect Options→ Settings and select:•Default view - To select the view that is shown first when you open Calendar.•Week starts on - To change the starting day of the week.•Week view title - To change the title of the Week view to be the week number or the week dates.Shortcut: To create a calendar entry, press any key ( to ) in any calendar view. A Meeting entry is opened and the characters you keyed in are added to the Subject field. • SET CALENDAR ALARMS1Create a new Meeting or Anniversary entry, or open a previously created entry.2Scroll to Alarm and press to open the Alarm time and Alarm date fields.

[ 112 ]3Set the alarm time and date.4Press Done. An alarm indicator is shown next to the entry in the Day view.Stop a calendar alarmThe alarm duration is one minute. When the alarm time expires, press Stop to end the calendar alarm. If you press any other key, the alarm is set to snooze. • SEND CALENDAR ENTRIESIn the Day view, scroll to the entry you want to send and select Options→ Send. Then select the method, the choices are: Via text message, Via e-mail (available only if the correct e-mail settings are in place), Via Bluetooth, or Via infrared. For further information, see the “Messaging” on p. 71, “Send and receive data via infrared” on p. 143, and “Send data via Bluetooth connection” on p. 139. • TO-DOGo to Menu→ To-do.In To-do you can keep a list of tasks that you need to do.The To-do list uses shared memory. See “Shared memory” on p. 19.1To start to write a to-do note, press any key ( to ). The editor opens and the cursor blinks after the letters you have keyed in.2Write the task in the Subject field. Press to add special characters.• To set the due date, scroll to the Due date field and key in a date. • To set a priority, scroll to the Priority field and press . 3To save the to-do note, press Done.

[ 113 ]Calendar and To-doNote: If you remove all characters and press Done, the previously saved note will be deleted.•To open a to-do note, scroll to it and press .•To delete a to-do note, scroll to it and select Options→ Delete or press .•To mark a to-do note as completed, scroll to it and select Options→ Mark as done. •To restore a to-do note, select Options→ Mark as not done. • IMPORT DATA FROM OTHER NOKIA PHONESYou can move calendar, contacts, and to-do data from many different Nokia phones to your Nokia 3600 or Nokia 3650 using the PC Suite Data Import application. Instructions for using the application can be found in the PC Suite online help on the CD-ROM.Priority icons HighLowno icon NormalStatus iconstask completedtask not completed

[ 114 ]13 Extras • CALCULATORNote: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Go to Menu→ Extras→ Calculator.Options in Calculator are: Last result, Memory, Clear screen, Help, and Exit.1Enter the first number of your calculation. Press to erase any mistakes.2Scroll to a function and press to select it.Use to add, to subtract, to multiply, or to divide. 3Enter the second number.4To execute the calculation, scroll to and press .Note: The Calculator has limited accuracy and rounding errors may occur, especially in long divisions.• To add a decimal, press .• Press and hold to clear the result of the previous calculation.• Use and to view previous calculations and move in the sheet.• Select to save a number to the memory, indicated by M. To retrieve the number from the memory, select .• To retrieve the result of the last calculation, select Options→ Last result.Tip: Press repeatedly to scroll the functions. You can see the selection change between the functions.

[ 115 ]Extras • COMPOSERGo to Menu→ Extras→ Composer.Options in the Composer main view are: Open, New tone, Delete, Mark/Unmark, Rename, Duplicate, Help, and Exit.Composer allows you to create your own, customized ringing tones. Note that it is not possible to edit a default ringing tone.1Select Options→ New tone to open the editor and to start composing.• Use the keys to add notes and rests. See the table. Or, select Options→ Insert symbol to open a list of notes and rests. The default duration for a note is 1/4.• To listen to the tone, press or select Options→ Play. The playback is always started from the beginning of the tone. To stop playing, press Stop.• To adjust the volume while a tone is playing, press to increase or press to decrease it. Or, select Options→ Volume before you start to play the tone.• To adjust the tempo, select Options→ Tempo. To increase or decrease the tempo gradually, press and hold or , respectively. Tempo is measured in beats per minute. The maximum is 250 beats, the default tempo for a new tone is 160 beats, and the minimum is 50 beats.• To select many notes or rests at the same time, press and hold and press and hold or at the same time. • To apply different playing styles, select two or more notes and then select Options→ Style→ Legato (notes are played in a smooth and even manner) or select one or more notes and then select Staccato (notes are played separately to produce short sharp sounds).• To move note(s) up or down on the staff by a half step, scroll to the note and press or .• For example, press and hold together with to produce C#.

[ 116 ]2Select Back to save.Options when composing are: Play, Insert symbol, Style, Tempo, Volume, Help and Exit. •CONVERTERIn Converter, you can convert measures such as Length from one unit (Yards) to another (Meters). Go to Menu→ Extras → Converter. Options in Converter are: Select unit /Change currency, Conversion type, Currency rates, Help, and Exit.Note: The Converter has limited accuracy and rounding errors may occur.Convert units1Scroll to the Type field and press to open a list of measures. Scroll to the measure you want to use and press OK.Key Note Key and functionC Shortens the duration of the selected note(s)/rest(s) in steps.D Lengthens the duration of the selected note(s)/rest(s) in steps.E Inserts a rest.FPress to open a list of notes and rests.G Switches octaves, all selected note(s) or rest(s) is/are moved to the next octave.A Deletes selected note(s).BA long press of keys to produces a lengthened (dotted) note or rest or shortens a lengthened note.

[ 117 ]Extras2Scroll to the first Unit field and press to open a list of available units. Select the unit from which you want to convert and press OK.Scroll to the next Unit field and select the unit to which you want to convert.3Scroll to the first Amount field and key in the value you want to convert. The other Amount field changes automatically to show the converted value.Press to add a decimal and press for the +, - (for temperature), and E (exponent) symbols.Note: The conversion order changes if you write a value in the second Amount field. The result is shown in the first Amount field.Tip: To rename a currency, go to the Currency rates view, scroll to the currency, and select Options→ Rename currency.Set a base currency and exchange ratesBefore you can make currency conversions, you need to choose a base currency (usually your domestic currency) and add exchange rates.Note: The rate of the base currency is always 1. The base currency determines the conversion rates of the other currencies.Example: If you set the United States Dollar (USD) as the base currency, a Euro is 1.00. Thus, you would write 1.00 as the exchange rate for the Euro.1Select Currency as the measure type and select Options→ Currency rates. A list of currencies opens and you can see the current base currency at the top.2To change the base currency, scroll to the currency (usually your domestic currency), and select Options→ Set as base curr..Important: When you change the base currency, all previously set exchange rates are set to 0 and you need to key in new rates.3Add exchange rates (see example), scroll to the currency, and key in a new rate, that is, how many units of the currency equal one unit of the base currency you have selected.4After you have inserted all the needed exchange rates, you can make currency conversions. See “Convert units” on p. 116.

[ 118 ] •NOTESGo to Menu→ Extras→ Notes.You can link notes to Favorites and send them to other devices. Plain text files (TXT format) you receive can be saved to Notes.Press ( to ) to start to write. Press to clear letters. Press Done to save. •CLOCKGo to Menu→ Extras→ Clock.Options in Clock are: Set alarm, Reset alarm, Remove alarm, Settings, Help, and Exit.Change clock settingsTo change the time or date, select Options→ Settings in Clock. To change the clock shown in standby mode, scroll down in the Date and time settings and select Clock type→ Analog or Digital.Set an alarm1To set a new alarm, select Options→ Set alarm.2Enter the alarm time and press OK. When the alarm is active, the indicator is shown.The alarm clock works even if the phone is switched off.To cancel an alarm, go to clock and select Options→ Remove alarm.Turn off an alarm•Press Stop to turn off the alarm. • When the alarm tone sounds, press any key or Snooze to stop the alarm for five minutes, after which it will resume. You can do this a maximum of five times.If the alarm time is reached while the phone is switched off, the phone switches itself on and starts sounding the alarm tone. If you press Stop, the phone asks whether you want to activate the phone for calls. Press No to switch off the phone or Yes to make and receive calls.

[ 119 ]ExtrasNote: Do not press Yes when wireless phone use is prohibited or when it may cause interference or danger. •RECORDERGo to Menu→ Extras→ Recorder.Options in Recorder are: Open, Record sound clip, Delete, Move to phone mem, Move to mem. card, Rename sound clip, Send, Add to Favorites, Help, and Exit.The voice recorder allows you to record telephone conversations and voice memos. If you are recording a telephone conversation, both parties will hear a tone every five seconds during recording.Note: When using this feature, obey all laws and respect the privacy and legitimate rights of others. Select Options→ Record sound clip and scroll to a function and press to select it. Use: - to record, - to pause, - to stop, - to fast forward, - to fast rewind, or - to play an opened sound file.Note: Recorder cannot be used when a data call or a GPRS connection is active. • MEMORY CARDOptions in the memory card are: Backup phone mem., Restore from card, Format mem. card, Memory card name, Set password, Change password, Remove password, Unlock memory card, Mem. in use, Help and Exit.If you have a memory card you can use it to store your multimedia files like video clips and sound files, photos, messaging information, and to backup information from your phone’s memory.Important: Keep all memory cards out of the reach of small children.Note: Details of how you can use the memory card with other features and applications of the Nokia 3600 and Nokia 3650 are given in the sections describing these features and applications.

[ 120 ]Insert the memory card1Make sure the phone is switched off.2With the back of the phone facing you, slide open the cover and remove the battery, see Quick start ‘Insert the SIM card’ for instructions on removing the cover.3Position the memory card in its slot. Make sure that the gold contacts of the card are facing down.4Slide the silver catch over the memory card to secure it.5When you have secured the card in place, replace the battery, then replace the cover by sliding it back into place.Important: If you are installing an application to the memory card and need to reboot the phone, do not remove the card until the reboot is complete. Otherwise the application files may be lost.Format the memory cardYou must format the memory card before you can use it for the first time.

[ 121 ]ExtrasSelect Options→ Format mem. card.You will be asked to confirm your request and once you confirm, formatting starts.Back up and restore phone memoryYou can backup information from your phone’s memory to the memory card. Select Options→ Backup phone mem.You can restore information from the memory card to the phone’s memory. Select Options→ Restore from card.Memory card passwordYou can set a password to protect your memory card against unauthorized use.Note: The password is stored in your phone and you do not have to enter it again while you are using the memory card on the same phone. If you want to use the memory card on another phone, you will be asked for the password.To set up, change, or remove your password select Options→ Set password, Change password, or Remove password.The password can be up to eight characters long.Important: Once the password is removed, the memory card can be used on any phone without a password.UNLOCK A MEMORY CARDIf you insert another password protected memory card in your phone, you will be prompted to enter the password of the card. To unlock the card, select Options→ Unlock memory card.Check memory consumptionUsing the Mem. in use option, you can check the memory consumption of different data groups and the available memory for installing new applications or software on your memory card. Select Options→ Mem. in use.

[ 122 ]14 Services (XHTML)Go to Menu→ Services or press and hold in standby mode.Tip: The key is marked with an internet symbol so that you can easily locate it and use it to connect to the internet.Note: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Glossary: XHTML browser supports pages written in the Hypertext Markup Language (XHTML) and the Wireless Markup Language (WML). Various service providers on the Internet maintain pages specifically designed for mobile phones, offering services such as news, weather reports, banking, travel information, entertainment, and games. With the XHTML browser you can view these services as WAP pages written in WML, XHTML pages written in XHTML, or a mixture of both.Note: Check the availability of services, pricing, and tariffs with your network operator and/or service provider. Service providers will also give you instructions on how to use their services. • BASIC STEPS FOR ACCESSING THE WEB• Save the settings that are needed to access the web service that you want to use. See “Phone browser service settings” on p. 123. • Connect to the service. See “Make a connection” on p. 123.• Start browsing the web pages. See “Browsing” on p. 125.• Disconnect from the service. “End a connection” on p. 128.

[ 123 ]Services (XHTML) • PHONE BROWSER SERVICE SETTINGSReceiving settings in a smart messageTip: Settings may be available, for example, on the site of a network operator or service provider.You may receive service settings in a special text message called a “smart message” from the network operator or service provider that offers the service. See “Receive smart messages” on p. 88. For more information, contact your network operator or service provider.Key in the settings manuallyFollow the instructions given to you by your service provider.1Go to Settings→ Connection settings→ Access points and define the settings for an access point. See “Connection settings” on p. 35.2Go to Services→ Options→ Add bookmark. Write a name for the bookmark and the address of the browser page defined for the current access point.Make a connectionTip: To access the Bookmarks view while browsing, press and hold down . To return to the browser view again, select Options→ Back to page.Once you have stored all the required connection settings, you can access browser pages.There are three different ways to access browser pages:• Select the homepage ( ) of your service provider. • Select a bookmark from the Bookmarks view.• Press the keys to to start to write the address of a browser service. The Go to field at the bottom of the display is immediately activated and you can continue writing the address there.After you have selected a page or written the address, press to start to download the page. See also “Data connection indicators” on p. 13.

[ 124 ]Connection securityIf the security indicator is displayed during a connection, the data transmission between the phone and the browser gateway or server is encrypted and secure.Note: The security icon does not indicate that data transmission between the gateway and the content server (the place where the requested resource is stored) is secure. It is up to the service provider to secure data transmission between the gateway and the content server. View bookmarksOptions in the Bookmarks view (selection on a bookmark or folder) are: Open, Download, Back to page, Send, Go to URL address / Find bookmark, Add bookmark, Edit, Delete, Read service msgs., Disconnect, Move to folder, New folder, Mark/Unmark, Rename, Clear cache, Details, Add to Favorites, Settings, Help, and Exit.Glossary: A bookmark consists of an Internet address (mandatory), bookmark title, WAP access point, and if the service requires, a user name and password.Note: Your phone may have some pre-installed bookmarks for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any site.In the Bookmarks view, you can see bookmarks pointing to different kinds of web pages. Bookmarks are indicated by the following icons: - The starting page defined for the browser access point. If you use another web access point for browsing, the starting page is changed accordingly. - The last visited page. When the phone is disconnected from the service, the address of the last visited page is kept in memory until a new page is visited during the next connection.

[ 125 ]Services (XHTML) - A bookmark showing the title.When you scroll through bookmarks, you can see the address of the highlighted bookmark in the Go to field at the bottom of the display. See the bookmarks figure in “Keys and commands used in browsing” on p. 125.Options when browsing are: Open, Service options, Bookmarks, History, Go to URL address, View images, Read service msgs., Save as bookmark, Send bookmark, Reload, Disconnect, Show images, Clear cache, Save page, Find, Details, Session, Security, Settings, Help, and Exit.Add bookmarks1In the Bookmarks view, select Options→ Add bookmark.2Start to fill in the fields (see the bookmarks figure in “Keys and commands used in browsing” on p. 125). Only the address must be defined. The default access point is assigned to the bookmark if no other one is selected. Press to enter special characters such as / , . , : , and @. Press to clear characters.3Select Options→ Save to save the bookmark.Send bookmarksTo send a bookmark, scroll to it and select Options→ Send→ Via text message. • BROWSINGOn a browser page, new links appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them.Keys and commands used in browsing• To open a link, press .

[ 126 ]• To scroll the view, use the scroll key.• To enter letters and numbers in a field, press the keys to . Press to enter special characters such as /, ., :, and @. Press to clear characters.• To go to the previous page while browsing, press Back. If Back is not available, select Options→ History to view a chronological list of the pages you have visited during a browsing session. The history list is cleared each time a session is closed.• To check boxes and make selections, press .• To retrieve the latest content from the server, select Options→ Reload.• To open a sublist of commands or actions for the currently open web page, select Options→ Service options.• Press to disconnect from a web service and to quit browsing.VIEWING NEW SERVICE MESSAGES WHILE BROWSINGTo download and view new service messages while browsing:1Select Options→ Read service msgs. (shown only if there are new messages).2Scroll to the message and press to download and open it.For more information about service messages, see “Service messages” on p. 89.SAVING BOOKMARKS• To save a bookmark while browsing, select Options→ Save as bookmark.• To save a bookmark received in a smart message, open the message in the Inbox in Messaging and select Options→ Save to bookmarks. See also “Receive smart messages” on p. 88.

[ 127 ]Services (XHTML) • VIEW SAVED PAGESOptions in the Saved pages view are: Open, Back to page, Reload, Remove, Read service msgs., Disconnect, Move to folder, New folder, Mark/Unmark, Rename, Clear cache, Details, Add to Favorites, Settings, Help, and Exit.If you regularly browse pages containing information that doesn’t change very often, for example a train timetable, you can save and then browse them when offline. If you have a memory card, you can save web pages on it instead of the phone’s memory.To save a page, while browsing select Options→Save page. • Saved web pages are indicated by the icon.• In the saved pages view you can also create folders to store your saved web pages. Folders containing saved web pages are indicated by the icon.• To open the Saved pages view, press in the Bookmarks view (see the saved pages figure on p. 127). In the Saved pages view, press to open a saved page. • If you want to start a connection to the web service and to retrieve the page again, select Options→ Reload. You can also arrange the pages into folders.Note: The phone stays online after you reload the page. • DOWNLOAD THROUGH THE BROWSERYou can download items such as ringing tones, images, operator logos and video clips through the mobile browser. These items can be provided free or for a price.Once downloaded, items are handled by the respective applications on your phone, for example a downloaded photo will be saved in the Images.

[ 128 ]Download directly from the web pageTo download the item directly from a web page scroll to the link and select Options→ Open.Purchase an itemGlossary: Digital Rights Management (DRM) is a system for protecting the copyright of digital content that is distributed online.Note: Copyright protections may prevent some images, ringtones and other content from being copied, modified, transferred or forwarded.To download the item:• Scroll to the link and select Options→ Open.• Select Buy if you want to buy the item.Check an item before downloadingYou can see details about an item before you download it. Details about an item may include the price, brief description and size. Note: Check with your service provide to see if they offer this service.• Scroll to the link and select Options→ Open.Details about the item are displayed on your phone.• If you want to continue with the downloading, press Accept or if you want to cancel the download, press Cancel. • END A CONNECTIONTo end a connection, select Options→ Disconnect. You can also press and hold to quit browsing and to return to standby mode.

[ 129 ]Services (XHTML)Empty the cacheThe information or services you have accessed are stored in the cache memory of the phone.If you have tried to access or have accessed confidential information requiring passwords (for example, your bank account), empty the cache of your phone after each use. To empty the cache, select Options→ Clear cache.Glossary: A cache is a buffer memory that is used to store data temporarily. • BROWSER SETTINGS•Default access point - If you want to change the default access point, press to open a list of available access points. The current default access point is highlighted. For more information, see “Connection settings” on p. 35.•Show images - Choose if you want to view pictures when you are browsing. If you choose No, you can later load images during browsing by selecting Options→ Show images.•Font size - You can choose five text sizes in the browser: Smallest, Small, Normal, Large and Largest.•Cookies - Allow /Reject. You can enable or disable the receiving and sending of cookies.•Confirm touch tones - Always / First sending only. The browser supports functions you can access while browsing. You can make a voice call while you are on a browser page, send touch tones while a voice call is in progress, and save in Contacts a name and phone number from a browser page. Choose whether you want to confirm before the phone sends touch tones during a voice call. •Text wrapping - Choose Off if you don’t want the text in a paragraph to automatically wrap, or On if you do.

[ 130 ]15 Java™ ApplicationsNote: Your phone must be switched on to use this function. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Go to Menu→ Applications.Options in the Applications main view are: Open, View details, Settings, Remove, Go to URL address, Update, Help, and Exit.In the Applications main view you can open installed Java applications or remove them. In the Install view you can install new Java applications (file extensions .jad or .jar).Note: Your phone supports J2ME Java applications. Do not download PersonalJava applications to your phone as they cannot be installed.When you open Applications, you can see a list of Java applications that have been installed to your phone. Scroll to an application and select Options→ View details to view:•Status - Installed, Running, or Downloaded (shown only in Install view) •Version - the application version number•Supplier - the supplier or manufacturer of the application•Size - the size of the application file in kilobytes•Type - a brief description of the application •URL - an address of an information page on the Internet •Data - the size of application data such as high scores, in kilobytesTo start a data connection and to view extra information about the application, scroll to it and select Options→ Go to URL address.To start a data connection and to check if there is an update available for the application, scroll to it and select Options→ Update.Applications uses shared memory. See “Shared memory” on p. 19.

$[ 131 ]Java™ Applications • INSTALL A JAVA APPLICATIONOptions in the Install view are: Install, View details, Delete, Help, and Exit.Installation files may be transferred to your phone from a computer, downloaded during browsing, or sent to you in a multimedia message as an e-mail attachment using a Bluetooth connection or infrared connection. If you are using PC Suite to transfer the file, place it in the c:\nokia\installs folder in your phone.Warning: Only install software from sources that offer adequate protection against viruses and other harmful software.1In the Applications main view, to view the installation packages, press to open the Downloaded view.Note: In the Install view, you can only install Java software installation files with the extension .jad or .jar.2To install an application, scroll to an installation file and select Options→ Install.Alternatively, search the phone memory for the installation file, select the file, and press to start the installation. See the example on the side of the page.Example: If you have received the installation file as an e-mail attachment, go to your mailbox, open the e-mail, open the Attachments view, scroll to the installation file, and press to start the installation.1Press Yes to confirm the installation.The .jar file is required for installation. If it is missing, the phone may ask you to download it. If there is no access point defined for Applications, you will be asked to select one. When you are downloading the JAR file, you may need to enter a user name and password to access the server. You obtain these from the supplier or manufacturer of the application.During installation, the phone checks the integrity of the package to be installed. The phone shows information about the checks being carried out, and you are given options whether to continue with or cancel the installation. Once the phone has checked the integrity of the software package, the application is installed on your phone.$

[ 132 ]2The phone informs you when installation is complete.To open the Java application after installation, you must go to the Applications main view.Tip: When you are browsing WAP or browser pages, you can download an installation file and install it immediately. Note, however, that the connection is left running in the background during installation.Opening a Java application• Scroll to an application in the Applications main view and press to open it.Uninstalling a Java application• Select the application in the Applications main view and select Options→ Remove. • JAVA APPLICATION SETTINGSTo define a default access point for downloading missing application components, select Options→ Settings→ Default access point. For more information on creating access points, see the “Access points” on p. 37.Select an application and select Options→ Settings, and then select one of the following:•Access point - Select an access point to be used by the application for downloading extra data.•Network connection - Some Java applications may require a data connection to be made to a defined access point. If no access point has been selected, you will be asked to select one. The options are:Allowed - The connection is created immediately without a notification.Ask first - You will be asked before the application makes the connection.Not allowed - Connections are not allowed.

[ 133 ]Manager16 Manager • INSTALL APPLICATIONS AND SOFTWARENote: Your phone must be switched on to use the functions in the Tools folder. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Go to Menu→ Tools→ Manager.In Manager you can install new applications and software packages, and remove applications from your phone. You can also check the memory consumption.Options in the Manager main view are: View details, View certificate, Install, Remove, View log, Send log, Memory details, Help, and Exit.When you open Manager, you can see a list of:• installation packages that have been saved to Manager.• partially installed applications (indicated by ). • fully installed applications that you can remove (indicated by ).Note: In Manager, you can only use device software installation files with an .sis extension.Tip: To install Java applications (file extension .jad or .jar), go to Applications. For further information, see “Java™ Applications” on p. 130.Scroll to an installation file and select Options→ View details to view the Name, Version, Type, Size, Supplier, and Status of the software package.Scroll to a software package and select Options→ View certificate to display the security certificate details of a software package. See “Certificate management” on p. 45.Warning: Only install software from sources that offer adequate protection against viruses and other harmful software.

$[ 134 ]To help you, the software installation system uses digital signatures and certificates on software packages. Do not install the application if Manager gives a security warning during installation.Tip: Select Options→ View log to see what software packages have been installed or removed and when. • INSTALL SOFTWAREYou can install applications that are specifically intended for the Nokia 3600 and Nokia 3650 phones or suitable for the Symbian operating system. A software package is usually one large compressed file containing many component files.Note: If you install a program that is not intended specifically for the Nokia 3600 and Nokia 3650 phones, it may function and look very different from the usual Nokia 3600 and Nokia 3650 phone applications.Warning: If you install a file that contains an update or repair to an existing application, you can only restore the original application if you have the original installation file or a full back-up copy of the removed software package. To restore the original application, first remove the application and then install the application again from the original installation file or the back-up copy.Installation packages may be transferred to your phone from a computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, via Bluetooth, or via infrared. If you are using PC Suite to transfer the file, place it in the c:\nokia\installs folder on your phone.Example: If you have received the installation file as an e-mail attachment, go to your mailbox, open the e-mail, open the Attachments view, scroll to the installation file, and press to start the installation.Start the installation:To start the installation, open Manager, scroll to the installation package, and select Options→ Install.$

[ 135 ]ManagerAlternatively, search the phone memory or the memory card for the installation file, select the file, and press to start the installation. If you are installing software without a digital signature or a certificate, the phone warns you of the risks of installing software. Continue installation only if you are absolutely sure of the origin and contents of the software package. During installation, the phone checks the integrity of the package to be installed. The phone shows information about the checks being carried out and you are given options whether to continue or cancel the installation. Once the phone has checked the integrity of the software package, the application is installed on your phone.Tip: To send your installation log to a help desk so that they can see what has been installed or removed, select Options→ Send log→ Via text message or Via e-mail (available only if the correct e-mail settings are in place). • REMOVE SOFTWARE1To remove a software package, scroll to it and select Options→ Remove.2Press Yes to confirm the removal.Warning: If you remove software, you can only re-install it if you have the original software package or a full back-up of the removed software package. If you remove a software package, you may no longer be able to open documents created with that software. If another software package depends on the software package that you removed, the other software package may stop working. Refer to the documentation of the installed software package for details.

[ 136 ] • VIEW MEMORY CONSUMPTION• To open the memory view select Options→ Memory details.Note: If you have a memory card installed on your phone, you will have a choice of two memory views, one for the phone or Phone memory and one for the Memory card. If not, you will only have the Phone memory view.When you open either of the memory views, the phone calculates the amount of free memory for storing data and installing new software. In the memory views, you can view the memory consumption of the different data groups: Calendar, Contacts, Documents, Messages, Images, Sound files, Video clips, Applications, Mem. in use, and Free memory.Tip: If the phone memory is getting low, remove some documents, or move them to the memory card. See also the “Troubleshooting” on p. 174.

[ 137 ]Connectivity17 ConnectivityNote: Your phone must be switched on to use the functions in the Connectivity folder. Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.You can transfer data from your phone to another compatible device, for example, a phone or a computer, via a Bluetooth connection or infrared. • BLUETOOTH CONNECTIONGo to Menu→ Connect.→ Bluetooth.Bluetooth connectivity enables cost-free wireless connections between electronic devices within a maximum range of 30 feet. A Bluetooth connection can be used to send images, texts, business cards, and calendar notes. It can also be used to connect wirelessly to products with or using Bluetooth wireless technology, such as computers. Since Bluetooth devices communicate using radio waves, your phone and the other Bluetooth device do not need to be in direct line-of-sight. The two devices only need to be within a maximum of 30 feet (10 meters) of each other, although the connection can be subject to interference from obstructions such as walls or from other electronic devices. Using the Bluetooth application consumes the battery and the phone’s operating time will be reduced. Take this into account when performing other operations with your phone.There may be restrictions on using Bluetooth devices. Check with your local authorities.

[ 139 ]ConnectivityTip: To send text via a Bluetooth connection (instead of text messages), go to Notes, write the text, and select Options→ Send→ via Bluetooth.Bluetooth application settingsTo modify the Bluetooth application settings, scroll to the setting you want to change and press .•Bluetooth - Select On if you want to use Bluetooth wireless technology. If you set the Bluetooth application Off all active Bluetooth connections are ended and the Bluetooth application cannot be used for sending or receiving data.•My phone's visibility - If you select Shown to all, your phone can be found by other Bluetooth devices during device search. If you select Hidden, your phone cannot be found by other devices during device search. •My Bluetooth name - Define a Bluetooth name for your phone. After you have set the Bluetooth application to be active and changed My phone's visibility to All, this name can be seen by other Bluetooth device users.Tip: When searching for devices, some Bluetooth devices may show only the unique Bluetooth addresses (device addresses). To find out what the unique Bluetooth address of your phone is, enter the code *#2820# in standby mode.Send data via Bluetooth connectionNote: There can be only one active Bluetooth connection at a time.1Open an application where the item you wish to send is stored. For example, to send a photo to another device, open the Images application. 2Scroll to the item you want to send, for example, a photo and select Options→ Send→ Via Bluetooth.

[ 140 ]3The phone starts to search for devices within range. Bluetooth enabled devices that are within range start to appear on the display one by one. You can see a device icon, the device’s Bluetooth name, the device type, or a short name. Paired devices are shown with .Note: If you have searched for Bluetooth devices earlier, a list of the devices that were found previously is shown first. To start a new search, select More devices. If you switch off the phone, the list of devices is cleared and the device search needs to be started again before sending data.To interrupt the search, press Stop. The device list freezes and you can start to form a connection to one of the devices already found.4Scroll to the device you want to connect with and press Select. The item you are sending is copied to Outbox and the note Connecting is shown.5If required to pair with the other device, consider the following:• If the other device requires pairing before data can be transmitted, a tone sounds and you are asked to enter a passcode.• Create your own passcode (1-16 characters long, numeric) and agree with the owner of the other Bluetooth device to use the same code. This passcode is used only once and you do not have to memorize it.• After pairing, the device is saved to the Paired devices view (see “Paired devices view” on p. 141).Glossary: Pairing means authentication. The users of the Bluetooth enabled devices should agree on the passcode and use the same passcode for both devices in order to pair them. Devices that do not have a user interface have a factory set passcode.When the connection has been successfully established, the note Sending data is shown.Note: Data received by a Bluetooth connection can be found in the Inbox folder in Messaging. See “Inbox” on p. 85 for further information.

[ 141 ]ConnectivityNote: If sending fails, the message or data will be deleted. The Drafts folder in Messaging does not store messages sent by a Bluetooth connection.Check the status of the Bluetooth connection• When is shown in standby mode, the Bluetooth application is active.• When is blinking, your phone is trying to connect to the other device.• When is shown continuously, the Bluetooth connection is active.Paired devices viewOptions in the paired devices view are: New paired device, Connect / Disconnect, Assign short name, Delete, Delete all, Set as authorized / Set as unauthorized, Help, and Exit.Pairing with a device makes device searches easier and quicker. Paired devices are easier to recognize; they are indicated by in the search result list. In the Bluetooth application main view, press to open a list of paired devices ( ).PAIR WITH A DEVICE1Select Options→ New paired device in the Paired devices view. The phone starts to search for devices within range. Or, if you have searched for Bluetooth devices earlier, a list of the devices that were found previously is shown first. To start a new search, select More devices. 2Scroll to the device you want to pair with and press Select. 3Exchange passcodes. See “Send data via Bluetooth connection” on p. 139. The device is added to the Paired devices list.Tip: You can also play phone-to-phone games via a Bluetooth connection.Icons for different Bluetooth enabled devicesComputerPhoneOtherUnknown

[ 142 ]CANCEL PAIRING• In the Paired devices view, scroll to the device whose pairing you want to cancel and press or select Options→ Delete. The device is removed from the Paired devices list and the pairing is cancelled.• If you want to cancel all pairings, select Options→ Delete all.Note: If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately but the connection will remain active.ASSIGN SHORT NAMES FOR PAIRED DEVICESYou can define a short name (nickname, alias) to help you recognize a certain device. This name is stored in the phone memory and cannot be seen by other Bluetooth device users.Example: Give a short name to your friend’s Bluetooth enabled device or to your own computer to be able to recognize it more easily.To assign a short name, scroll to the device and select Options→ Assign short name. Write the short name and press OK.Note: Choose a name which is easy to remember and recognize. Later when you are searching for devices or a device is requesting a connection, the name you have chosen will be used to identify the device.SET A DEVICE TO BE AUTHORIZED OR UNAUTHORIZEDAfter you have paired with a device, you can set it to be authorized or unauthorized:Unauthorized (default) - Connection requests from this device need to be accepted separately every time.Authorized - Connections between your phone and this device can be made without your knowledge. No separate acceptance or authorization is needed. Use this status for your own devices, for example, your PC, or devices that belong to someone you trust. The icon is added next to authorized devices in the Paired devices view.

[ 143 ]ConnectivityIn the Paired devices view, scroll to the device and select Options→ Set as authorized / Set as unauthorized.Receive data via a Bluetooth connectionWhen you receive data via a Bluetooth connection, a tone sounds and you are asked if you want to accept the Bluetooth message. If you accept, is shown and the item is placed in the Inbox folder in Messaging. Bluetooth messages are indicated by . See “Inbox” on p. 85 for further information.Disconnect a Bluetooth connectionA Bluetooth connection is disconnected automatically after sending or receiving data. • INFRARED CONNECTIONTo start infrared, go to Menu→ Connect.→ InfraredVia infrared, you can send or receive data such as business cards and calendar notes to and from a compatible phone or data device.Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 Laser product.Send and receive data via infraredNote: All items which are received via infrared are placed in the Inbox folder in Messaging. New infrared messages are indicated by . See “Inbox” on p. 85 for further information.1Make sure that the infrared ports of the sending and receiving devices are pointing at each other and that there are no obstructions between the devices. The preferable distance between the two devices is three feet at most. To find the infrared port, see the picture of the different keys in the General information section of this guide.2The user of the receiving device activates the infrared port. To activate the infrared port of your phone to receive data via infrared, go to Menu→ Connect.→ Infrared and press .

[ 144 ]3The user of the sending device selects the desired infrared function to start data transfer. To send data via infrared, select Options→ Send→ Via infrared in an application.If data transfer is not started within two minutes after the activation of the infrared port, the connection is cancelled and must be started again.Tip: You can also play phone-to-phone games via infrared.Example: To send a contact card via infrared: (1) Ask the receiver to activate the infrared port in his/her device. (2) Go to Contacts, scroll to a card and select Options→ Send→ Via infrared.Note: Windows 2000: To be able to use infrared to transfer files between your Nokia 3600 or Nokia 3650 and a compatible computer, go to “Control Panel” and select “Wireless Link”. In the “Wireless Link” “File Transfer” tab check the “Allow others” to send files to your computer using infrared.Check the status of the infrared connection• When blinks, your phone is trying to connect to the other device or a connection has been lost.• When is shown continuously, the infrared connection is active and your phone is ready to send and receive data via its infrared port. • CONNECT YOUR PHONE TO A COMPUTERFor further information on how to make a connection to a compatible computer via infrared or a Bluetooth connection and how to install PC Suite, see the Installation Guide for PC Suite on the CD-ROM in the ‘Install’ section. For further information on how to use the PC Suite, see the PC Suite online help.

[ 145 ]ConnectivityUse the CD-ROMNote: Although this user guide, the CD-ROM, the PC Suite software, and the Nokia website may use file names that include only the Nokia 3650 model number, the files and software are fully compatible with both the Nokia 3600 and the Nokia 3650 phone models.The CD-ROM should launch itself after you have inserted it into the CD-ROM drive of your compatible PC. If not, proceed as follows:1Click the Window Start button and select Programs→ Windows Explorer.2On the CD-ROM drive, locate a file called Nokia3650.exe and double-click it. The CD-ROM interface opens.3You can find PC Suite in the ‘Install’ section. Double-click ‘PC Suite for Nokia 3650’. The installation wizard will guide you through the installation process. • USE YOUR PHONE AS A MODEMDetailed installation instructions can be found in Quick guide for Modem Options for Nokia 3650 on the CD-ROM supplied with the phone.

[ 146 ]18 PC SuiteNote: Although this user guide, the CD-ROM, and the Nokia website may use PC Suite file names that include only the Nokia 3650 model number, the 3600 Series PC Suite software is fully compatible with both the Nokia 3600 and the Nokia 3650 phone models.Please refer to other sections of this user guide for instructions on operation, care, and maintenance, including important safety information.This section explains how to install PC Suite on a compatible PC, how to connect your phone to the PC, and how to start using PC Suite. For more detailed information on the use of PC Suite, please refer to the online help of the PC Suite applications.With PC Suite you can:• Share information between your PC and phone.• Make back-up copies of the phone files to protect data in case of loss or damage.• Synchronize your calendar, contacts, and tasks with Microsoft and Lotus applications.• Copy and move files between your PC and phone.• Copy contacts and calendar information from another Nokia mobile phone, Nokia communicator, or Palm device to your Nokia 3600 or Nokia 3650 phone.• Configure phone settings.• Install software on your phone. • SOFTWARE AND HARDWARE REQUIREMENTSTo install and run PC Suite, you need:• A compatible PC running Windows 98, Windows ME, Windows 2000 with Service Pack 2, or Windows XP.• At least 110 MB of free disk space.

[ 148 ]Note: In the File Transfer Video and Audio Converters dialog box it is recommended that you leave the Install Video and Audio Converters check box selected. When the converters are installed, video and audio format files that you copy from the PC to your Nokia 3600 or Nokia 3650 are automatically converted to the video and audio format used by the phone. If you do not have the CD-ROM:1Download the installation file (Nokia_3650_PC_Suite_en-US.exe).2Go to the directory where you downloaded the file and double-click it.3Follow the instructions on the screen. • CONNECT YOUR PHONE TO THE PCWhen you use PC Suite for the first time, you must connect your phone to the PC. Thereafter, you can use PC Suite whether or not your phone is connected to your PC.You can connect your phone to the PC via an infrared or Bluetooth connection.See the Connecting your Nokia 3650 to a PC and Disconnecting and reconnecting your Nokia 3650 online help topics for details.Note: When you connect your phone to your PC, PC Suite automatically synchronizes the clock on the phone with the PC. Therefore, you need to make sure that the clock on your PC is correct. Tip: Check the icons on the taskbar to see the connection status. The connection icon changes to when your phone is connected to the PC.Use an infrared connection1Check that an infrared driver is already installed on the PC. Go to the Windows Control Panel. If the Infrared icon is visible, the driver has been installed. 2Check that infrared is enabled on the PC. Note that in Windows 2000 the infrared connection is called Wireless Link.

[ 150 ]2Establish a serial port connection between your phone and your PC. For information on how to do this, refer to the user documentation of the Bluetooth software.3Double-click the PC Suite Connection icon on the taskbar to open the Connection Properties dialog box. Make sure that the correct port is selected for the Bluetooth connection. If no port is selected, select the COM port with Bluetooth as the connection type. Note that you can select more than one COM port. Note: If you cannot select the port you want to use, another PC application is using that port. To use PC Suite with that port, you must either close the other application or disable it temporarily.4If you are connecting your phone to your PC using a Bluetooth connection for the first time, you need to pair the devices. To pair the devices, you need to enter a passcode in both devices. Create your own passcode (1-16 characters long, numeric) and enter the same passcode in both the phone and the PC when requested. This passcode is used only once and you do not need to memorize it. For further information, refer to the chapter on connectivity in this user guide.5Authorize the connection between your phone and your PC. Select Yes when a connection request appears on the phone’s display. You can set your PC as authorized, which means that the connection between your phone and your PC is made without separate authorization. To do this, go to the Paired devices view on your phone, scroll to the device, and select Options→ Set as authorized.Since Bluetooth devices communicate using radio waves, your phone and the other Bluetooth device do not need to be in line-of-sight. The two devices only need to be within a maximum of about 30 feet (10 meters) of each other, although the connection can be subject to interference from obstructions such as walls or from other electronic devices.There may be restrictions on using Bluetooth devices. Check with your local authorities.

[ 151 ]PC SuiteThe Bluetooth connection does not close automatically. You must close it from the Bluetooth software on your PC. Close the Bluetooth connection when you stop using PC Suite in online mode. Tip: You can find the online help from the Windows Start button. Point to Programs, and select PC Suite for Nokia 3650 and PC Suite for 3650 Help.Note: If you have problems connecting your phone to the PC, check to see if both your phone and your PC are switched on and that you have selected the correct communications port. See the Connecting your Nokia 3650 to a PC and Disconnecting and reconnecting your Nokia 3650 online help topics for details. • START PC SUITEYou can start PC Suite from the Start menu: click the Start button, select Programs and point to PC Suite for Nokia 3650, and then click PC Suite for Nokia 3650.If you are connecting your phone to the PC for the first time, after starting PC Suite you are asked to do two things:• Name your phone.You can use more than one Nokia 3600 or Nokia 3650 phone with PC Suite. To be able to identify individual phones, you must give a name to each phone.• Select tasks to be created.To be able to back up and synchronize information between your phone and PC, you must have the appropriate tasks created. During the first connection, PC Suite lists tasks that can be created automatically. You do not have to create these tasks at this point, if you do not want to. However, if you create the tasks, you can edit them later.

[ 152 ]To create these tasks, proceed as follows:1When the first connection is established, the Welcome to PC Suite for Nokia 3650 dialog box appears. Type a name for your phone in the box and click OK.2Next, you will be asked for tasks that you want to perform with PC Suite. In the Create Tasks dialog box, select the tasks that you want PC Suite to create and click OK. You can edit these tasks later, if you want.Note: Making or answering phone calls during a PC connection is not recommended. It might disrupt operation.Tip: The folders on your PC that contain information about your phone will also be named according to the name you give your phone at this point. • ONLINE AND OFFLINE MODESYou can use PC Suite either in online mode or in offline mode. You have the following options:• Work online - Connect your phone to the PC and let PC Suite identify it. In online mode your phone is connected to your compatible PC, and you can work with the information stored on the phone.• Work offline - Leave your phone disconnected and choose the name of your phone from a list of named devices. The menus and other available options in offline mode differ from those of online mode. • CONNECTION STATUSThe icon on the right-hand side of the status bar and on the Windows taskbar displays the connection status as follows: Disconnected Connected Transferring data (animated icon)

[ 153 ]PC Suite • MAIN WINDOW INFORMATIONThe main window of PC Suite displays the following information and controls:application bartoolbar shortcuts for menu commandsmenu commands the name of the application that is currently openinformation about the selected commandthe name of the connected phone connection status

[ 154 ] • PC SUITE APPLICATIONSA number of icons are displayed on the left-hand side of the PC Suite window - this area is known as the application bar. To use an application, click its icon. For information on using an application, see the online help.Backup/RestoreWith Backup/Restore, you can back up information on your phone. If you ever lose information from your phone (for example, through accidental deletion), or need to refer to an earlier, backed up version, you can restore it to your phone. Backup/Restore supports Memory cards.Note: Operator logos, ringing tones (polyphonic ringing tones (MIDI) and single tones) and Java-applications that you have installed on your phone after you first started using it are not saved during backup. Therefore these items cannot be restored. Only the original Nokia 3600 and Nokia 3650 ringing tones are saved.Control PanelYou can use Control Panel to change some of the general settings of PC Suite. The following features are included in Control Panel:•Connection enables you to specify the port that PC Suite uses when attempting to connect to a phone.•Data Location enables you to specify where you want to store backups and synchronization files.•Device Manager enables you to see which phones have been connected to your PC, and to remove details of phones that you no longer want to connect.Important: You cannot restore information that you have removed using Device Manager.•File Transfer Converters enables you to select which, if any, video and audio converters are used when files are copied to the phone using File Transfer.

[ 155 ]PC SuiteData ImportWith Data Import, you can transfer contacts and calendar data to your Nokia 3600 or Nokia 3650 from the Nokia 3320, Nokia 3360, Nokia 3600, Nokia 3650, Nokia 6210, Nokia 6250, Nokia 6310, Nokia 6310i, Nokia 6320, Nokia 6340, Nokia 6360, Nokia 6370, Nokia 6385, Nokia 6510, Nokia 6590, Nokia 6610, Nokia 6650, Nokia 7110, Nokia 7160, Nokia 7190, Nokia 7210, Nokia 8210, Nokia 8290, Nokia 8310, Nokia 8390, Nokia 8810, Nokia 8850, Nokia 8890, Nokia 8910, Nokia 9210 Communicator, Nokia 9290 Communicator, or Palm device.SynchronizeWith Synchronize, you can synchronize your phone contacts and calendar data with Microsoft and Lotus applications. To be able to synchronize, you must have tasks created for synchronization. When you connect your phone to your PC for the first time, PC Suite identifies your phone and creates a number of tasks. You can modify these tasks and create other tasks if you want. You can also schedule tasks to be run at regular intervals, every time you connect your phone to your PC, or on command only.The animated icon appears on the Windows taskbar when synchronization is in progress. The icon indicates that the data on your phone is being synchronized with the data on the PC.File TransferWith File Transfer, you can copy files between your phone and your PC, as well as delete and rename selected files. With the Multimedia converters, video and audio format files that you copy from the PC to your phone are automatically converted to the video and audio format used by the phone. Image TransferWith Image Transfer, you can copy, move, rename, and delete image files on your phone and your PC. You can also view image files if there is an associated viewer application.

$[ 156 ]Settings wizardWith the Settings wizard, you can configure the e-mail account, remote connection, message center, and multimedia message center settings of your phone. For example, you can manage settings manually or copy a working configuration from the PC to the phone. You can also back up your phone settings to a file.Install software on your phoneWith PC Suite, you can install Java and device software on your phone. These applications do not have an icon on the application bar. Instead, you can start these applications from the Tools menu. See the Installing device software online help topic for details.Note: Installation packages can be received in a multimedia message, as an e-mail attachment, via Bluetooth, or via infrared and downloaded to your phone. If you are using PC Suite to transfer the file, save it to the c:\nokia\installs folder.Note: You can only use Java installation files with the extension .jad or .jar, and device software installation files with the extension .sis.Important: Only install software from sources that offer adequate protection against viruses and other harmful software. • REMOVE PC SUITE FROM YOUR PCUninstalling PC Suite removes all files and folders that were added by the PC Suite installation program, but does not remove backed-up and archived files or synchronization information. Therefore, if you reinstall PC Suite you can back up, restore, and synchronize using the same settings as before.Note: If you want to remove backed-up files, synchronizations, and other information relating to the phones you have connected, you must do this before removing PC Suite. For further information, see the Viewing and removing details of a Nokia 3650 online help topic.$