Microsoft NPW-3 Dual Band Tri-Mode Cellular Telephone User Manual 8265 1
Microsoft Mobile Oy Dual Band Tri-Mode Cellular Telephone 8265 1
Contents
- 1. Users Guide
- 2. 8265 Accessory List
Users Guide
Nokia 8265
User Guide
Phone Notes
Notes Where to get information
My number Wireless service provider
Voice mail number Wireless service provider
Wireless provider’s
number Wireless service provider
Provider’s
customer care Wireless service provider
Model number 8265 Type label. Located under
the battery inside the
phone’s back cover.
Phone type NPW-3 Type label. Located under
the battery inside the
phone’s back cover.
ESN (Electronic
serial number) Type label. Located under
the battery inside the
phone’s back cover.
8265_1.BOOK Page i Friday, October 19, 2001 3:06 PM
The wireless phone described in this guide is approved for use in TDMA and AMPS
networks.
Legal information
Part No. 9353859, Issue 1
© 2001 Nokia Mobile Phones. All rights reserved.
Nokia is a registered trademark of Nokia Corporation.
Printed in Canada 11/2001
Nokia, Nokia Connecting People, and the Original Accessories logos are trademarks
of Nokia Corporation and/or its affiliates.
US Patent No 5818437 and other pending patents.
T9 text input software Copyright © 1999-2001. Tegic Communications, Inc. All
rights reserved.
Includes RSA RSAFE cryptographic or security protocol software
from RSA Security.
The information contained in this user guide was written for Nokia phone 8265.
The right to make changes and improvements to any of the products described in
this guide without prior notice is reserved.
Export Controls
This product contains commodities, technology or software exported from the
United States in accordance with the Export Administration regulations. Diversion
contrary to U.S. law is prohibited.
FCC/Industry Canada Notice
Your phone may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry Canada
can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility.
This device complies with part 15 of the FCC rules. Operation is subject to the
condition that this device does not cause harmful interference.
8265_1.BOOK Page ii Friday, October 19, 2001 3:06 PM
[ i ]
Contents
1Safety first. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
2Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Get the most out of this guide. . . . . . . . . . . . . . . . . . .3
Understand wireless network services. . . . . . . . . . . . .5
Find information about your phone. . . . . . . . . . . . . . .6
Contact Nokia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Contact your service provider . . . . . . . . . . . . . . . . . . .7
Learn about Accessibility solutions . . . . . . . . . . . . . . .8
3Phone setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Install the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Charge the battery . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Remove the battery. . . . . . . . . . . . . . . . . . . . . . . . . . .11
4Phone basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Your Nokia 8265 phone . . . . . . . . . . . . . . . . . . . . . . .12
About the antenna . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Learn the keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Navigation keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
icons and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . .16
Review phone symbols . . . . . . . . . . . . . . . . . . . . . . . .17
5Phone calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
6Phone menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Navigate menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Phone book menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
8265_1.BOOK Page i Friday, October 19, 2001 3:06 PM
[ ii ]
7Letters and numbers entry. . . . . . . . . . . . . . . . . . . . . 28
Enter letters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Enter numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
8Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
About the phone book . . . . . . . . . . . . . . . . . . . . . . . . 31
Use phone book menus . . . . . . . . . . . . . . . . . . . . . . . 31
Add names and numbers . . . . . . . . . . . . . . . . . . . . . .33
Change a stored telephone number . . . . . . . . . . . . . 33
Recall and redial numbers . . . . . . . . . . . . . . . . . . . . . 34
Erase stored names and numbers . . . . . . . . . . . . . . . 35
Erase the entire phone book . . . . . . . . . . . . . . . . . . .35
Check memory status. . . . . . . . . . . . . . . . . . . . . . . . . 36
9Voice mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
When you have a message . . . . . . . . . . . . . . . . . . . . 37
Set up your voice mailbox . . . . . . . . . . . . . . . . . . . . . 37
Set greetings and passwords. . . . . . . . . . . . . . . . . . .38
Listen to your voice messages. . . . . . . . . . . . . . . . . . 38
10 Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Check the call log. . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Check call timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
11 Advanced calling features . . . . . . . . . . . . . . . . . . . . . 44
Set in-call options . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Use call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
call forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Redial automatically . . . . . . . . . . . . . . . . . . . . . . . . . 49
Use a calling card. . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
8265_1.BOOK Page ii Friday, October 19, 2001 3:06 PM
[ iii ]
Send your own number in caller ID . . . . . . . . . . . . . .52
Select a phone number. . . . . . . . . . . . . . . . . . . . . . . .53
Set touch tones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
12 Personalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
What is a profile? . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Select a different profile. . . . . . . . . . . . . . . . . . . . . . .57
Customize a profile. . . . . . . . . . . . . . . . . . . . . . . . . . .57
Rename profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Restore factory settings . . . . . . . . . . . . . . . . . . . . . . .62
Set the display language . . . . . . . . . . . . . . . . . . . . . .63
Set and display the clock . . . . . . . . . . . . . . . . . . . . . .63
Set automatic date and time . . . . . . . . . . . . . . . . . . .65
Add a welcome note . . . . . . . . . . . . . . . . . . . . . . . . . .66
Use 1-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . .66
Use emergency key 9 . . . . . . . . . . . . . . . . . . . . . . . . .68
Use caller groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
13 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Change your security code. . . . . . . . . . . . . . . . . . . . .72
Protect your phone with the
Lock code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
Lock the keypad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75
Restrict calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
14 Network services features . . . . . . . . . . . . . . . . . . . . .79
Set up how your phone selects a system . . . . . . . . .79
Roaming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
15 Text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
8265_1.BOOK Page iii Friday, October 19, 2001 3:06 PM
[ iv ]
About writing messages. . . . . . . . . . . . . . . . . . . . . . . 82
Write and send a text message. . . . . . . . . . . . . . . . .86
Receive a text message . . . . . . . . . . . . . . . . . . . . . . . 87
When your phone’s memory is full . . . . . . . . . . . . . . 89
Erase a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Reply to a message. . . . . . . . . . . . . . . . . . . . . . . . . . .90
Forward a message. . . . . . . . . . . . . . . . . . . . . . . . . . .90
16 E-mail messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Save e-mail addresses . . . . . . . . . . . . . . . . . . . . . . . . 91
Send an e-mail message . . . . . . . . . . . . . . . . . . . . . . 92
Receive an e-mail message . . . . . . . . . . . . . . . . . . . . 94
Reply to or forward an e-mail message . . . . . . . . . . 96
17 Personal assistant. . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Use the calendar. . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Send and receive business cards. . . . . . . . . . . . . . . 104
Download ringing tones. . . . . . . . . . . . . . . . . . . . . . 105
Alarm clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
18 Fun and games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Space Impact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Pairs 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Snake 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
19 Wireless Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Notes on wireless Internet access. . . . . . . . . . . . . . 113
Set up for browsing . . . . . . . . . . . . . . . . . . . . . . . . . 114
Sign on to the Internet . . . . . . . . . . . . . . . . . . . . . . 114
8265_1.BOOK Page iv Friday, October 19, 2001 3:06 PM
[ v ]
Use browser options (Services Menu) . . . . . . . . . . .115
Sign off the Internet. . . . . . . . . . . . . . . . . . . . . . . . .115
Navigate the wireless Internet. . . . . . . . . . . . . . . . .115
Use bookmarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
20 Reference information . . . . . . . . . . . . . . . . . . . . . . .119
Batteries and chargers . . . . . . . . . . . . . . . . . . . . . . .119
Important safety information. . . . . . . . . . . . . . . . . .120
Emergency calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Certification information (SAR). . . . . . . . . . . . . . . .125
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
Chargers and other accessories . . . . . . . . . . . . . . . .130
21 Frequently asked questions (FAQ) . . . . . . . . . . . . . .133
22 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
23 Technical information. . . . . . . . . . . . . . . . . . . . . . . .141
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
24 NOKIA One-Year Limited Warranty . . . . . . . . . . . . .143
8265_1.BOOK Page v Friday, October 19, 2001 3:06 PM
[ vi ]
8265_1.BOOK Page vi Friday, October 19, 2001 3:06 PM
[ 1 ]
Safety first 1
1Safety first
Read these simple guidelines before you use your phone. Failure to comply
with these guidelines may be dangerous or illegal. For more detailed safety
information, see “Important safety information” on page 120.
Following are important safety precautions for phone use.
Switch off phone when use prohibited
Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
Road safety comes first
Do not use a wireless phone while driving.
Be aware of interference
All wireless phones may get interference that could affect
performance.
Switch off in hospitals
Follow any regulations or rules. Switch your wireless phone off
near medical equipment.
Switch off in aircraft
Wireless devices can cause interference in aircraft.
Switch off when refueling
Do not use your wireless phone at a refueling point. Do not use
it near fuel or chemicals.
8265_1.BOOK Page 1 Friday, October 19, 2001 3:06 PM
[ 2 ]
1Switch off near blasting
Do not use your wireless phone where blasting is in progress.
Observe restrictions, and follow any regulations or rules.
Keep out of water
Your wireless phone is not water-resistant. Keep it dry.
Make emergency calls
Make sure your wireless phone is switched on and in service.
Press at any time to clear the screen. Enter the emergency
number, then press . Give your location. Do not end the call
until told to do so.
Note: If the emergency key 9 feature is activated, you can
press and hold the 9 key to make an emergency call.
Use your phone sensibly
Use your wireless phone only in the normal position (next to the
ear). Do not touch the antenna unnecessarily.
Use only qualified service personnel
Equipment must be installed or repaired only by qualified service
personnel.
Use approved accessories and
batteries
Use only approved accessories and batteries. Do not connect
incompatible products.
Make phone calls
Make sure your wireless phone is switched on and in service. Enter
the phone number, including the area code, then press . To
end a call, press . To answer a call, press .
8265_1.BOOK Page 2 Friday, October 19, 2001 3:06 PM
[ 3 ]
Welcome 2
2Welcome
Congratulations on your purchase of a Nokia
8265 mobile phone, a new tool for the mobile
information society.
Nokia recommends that you read this chapter
before you use your new phone. You will find
useful information about:
•How to use this guide
•Cellular network services
•How to contact Nokia
• GET THE MOST OUT OF THIS GUIDE
The tips that follow can help you get peak performance from this guide as
you learn to use your phone.
Understand the terms
This guide provides instructions for certain actions.
•Press means to briefly press and release a key. For example,
press means press the zero key for 1 second and release.
•Press Menu means to press the key located below the word Menu on
the phone’s screen ().
•Press and hold means to press and hold a key for 1 to 3 seconds
(depending on the feature being used), then release the key.
•Highlighted means that an option on the screen is enclosed in a black
box. When an option is highlighted, it can be activated by pressing
the left selection key ().
8265_1.BOOK Page 3 Friday, October 19, 2001 3:06 PM
[ 4 ]
2Notice text conventions
This user guide provides text clues to help make instructions clear and easy
to follow. These clues are called conventions.
Follow graphic clues
This guide uses icons (small pictures) to alert you to important information.
Tip: Provides information about a shortcut or an alternate method
for performing an action.
Note: Explains a feature or points out an important concept.
Important: Alerts you to information critical to using a feature
correctly.
Caution: Warns you when you may lose information.
Warning: Helps you avoid personal injury, damage to the phone, or
property damage.
Convention What it means
bold The word or phrase appears on the phone’s screen.
bold and blue The word is an address on the World Wide Web.
bold, blue,
and italic A definition for the word or phrase appears in the
glossary. Refer to “Glossary” on page 137.
italic Italics indicate emphasis. Pay close attention to any
information in italics.
8265_1.BOOK Page 4 Friday, October 19, 2001 3:06 PM
[ 5 ]
Welcome 2
Look for updates
From time to time, Nokia updates this user guide to reflect changes or
corrections. The latest version may be available at the Nokia site on the
World Wide Web (www):
http://www.nokia.com
1On the home page, click Nokia Phones, scroll to the section about
your phone, and click Phone details.
2Click an item to download the user guide, quick guide, or interactive
guide (if available).
An interactive user guide that provides step-by-step instructions for any of
your phone features is available at:
http://www.nokiahowto.com
• UNDERSTAND WIRELESS NETWORK SERVICES
A wireless network service provides the
connections you need to use your mobile phone.
The network also can give you access to special
wireless services, including:
•Voice mail and voice privacy
•Call waiting, call forwarding, and caller ID
•Text messages
•Ability to send your own number
•News and information services
•Selected Internet access services
Sign up with a service provider
Before you can take advantage of any of the network services, you must
sign up with a wireless service provider. Your service provider will make
available descriptions of its services and instructions for using them.
Make sure your provider offers the services you need.
8265_1.BOOK Page 5 Friday, October 19, 2001 3:06 PM
[ 6 ]
2Before you sign up, make sure that your provider offers the services you
want because wireless network providers do not offer the same type of
services. For example, some networks may not support all language-
dependent characters.
• FIND INFORMATION ABOUT YOUR PHONE
If you need to call Nokia Customer Service or your cellular service provider,
you will need to provide specific information about your phone. This
information is provided on the phone’s type label. The label is located under
the battery inside the phone’s back cover. It contains the model and serial
numbers and other important information about your phone. Please do not
remove or deface the label.
Nokia recommends that you record this information in the Phone notes
table on the first page of this guide.
• CONTACT NOKIA
When you need help, the Nokia Customer Service department can provide
information about Nokia products.
Have the right information available
We recommend that you have the following information available before
contacting the Nokia Customer Service department:
•Your model number: 8265
•ESN (Electronic serial number). Refer to the type label located under
the battery inside the phone’s back cover.
•Your ZIP code
8265_1.BOOK Page 6 Friday, October 19, 2001 3:06 PM
[ 7 ]
Welcome 2
Have the phone or accessory available
Whether calling about your phone or an accessory, have the equipment
with you when you call. If a Nokia representative asks a specific question
about the product, it will be available for quick reference.
• CONTACT YOUR SERVICE PROVIDER
Some service providers program a one-key customer support number into
the phone. This number can be useful if you’re having trouble dialing a
number, especially when you’re traveling outside your home area.
This one-key feature might not be available on your system. Contact your
service provider for availability.
When you need to get in touch with your wireless service provider:
•Press and hold the key (or the key that your service provider
instructed you to use) for 2 seconds.
•Your phone will automatically dial the provider’s customer support
number if your provider offers this feature.
If your service provider determines that the problem is Nokia-related, the
provider’s representative will direct you to the Nokia Customer Care Center
(USA), or Nokia Customer Service (Canada).
Nokia Customer Care Center, USA Customer Service, Canada
Nokia Mobile Phones, Inc.
7725 Woodland Center Boulevard,
Suite #150
Tampa, Florida 33614
Tel: 1-888-NOKIA-2U
(1-888-665-4228)
Fax: 1-813-249-9619
Nokia Products Ltd.
575 Westney Rd. South
Ajax, Ontario L1S 4N7
Tel: 1-888-22-NOKIA
(1-888-226-6542)
Fax: 1-905-427-1070
8265_1.BOOK Page 7 Friday, October 19, 2001 3:06 PM
[ 8 ]
2 • LEARN ABOUT ACCESSIBILITY SOLUTIONS
Nokia is committed to making mobile phones easy to use for all individuals,
including those with disabilities. Nokia maintains a site on the World Wide
Web that is dedicated to accessibility solutions. For more information about
phone features, accessories, and other Nokia products designed with your
needs in mind, visit the Nokia web site at:
http://www.nokiaaccessibility.com
Accessible features
The 8265 has many accessible features, including:
•Nibs are on the key for quick reference to the keypad
•Tactile feedback when a you press a key
•Adjustable display contrast
•Ability to send and receive short text messages
•Convenience of one-touch dialing
•Vibrating alert for incoming calls and messages
LPS-3 Mobile Inductive Loopset
The LPS-3 Loopset is a Nokia accessory designed to make the 8200 series
phone more accessible to hearing-aid users. The LPS-3 Loopset is also
compatible with the Nokia 3300 and 8800 series digital phones.
The Nokia Loopset gives hearing-impaired wireless customers clear access
to digital telephony for the first time. With the loopset, people who use a
T-coil equipped hearing aid can make and receive calls without noise
interference.
8265_1.BOOK Page 8 Friday, October 19, 2001 3:06 PM
[ 9 ]
Welcome 2
HOW THE LOOPSET WORKS
The LPS-3 Loopset uses inductive technology to
transmit sound to a hearing aid equipped with a
T-coil. With inductive technology, the sound from
the phone is amplified more efficiently and background
noise is eliminated.
The loopset is easy to use. You wear the loopset around
your neck, connect it to your phone, and speak directly
toward the microphone.
For detailed instructions on using the loopset, refer to the booklet that
comes with the LPS-3.
Note: The Loopset is sold as an accessory to the phone.
Alternate format user guides
This user guide is available in alternate formats:
•Braille
•Large print
•Audiocassette
•E-text (electronic documents on a 3.5-inch disk, in Microsoft Word or
WordPerfect format).
To request any format, call Nokia Customer Care:
Customer Care Center Hearing-impaired, TTY
Tel: 1-888-NOKIA-2U
(1-888-665-4228)
Fax: 1-813-249-9619
Tel: 1-800-24-NOKIA
(1-888-246-6542)
8265_1.BOOK Page 9 Friday, October 19, 2001 3:06 PM
[ 10 ]
33Phone setup
• INSTALL THE BATTERY
First step, remove the back cover
To insert or remove the battery, remove the
phone’s back cover.
1Press down on the tab on the bottom of
the cover.
2Slide the cover down and lift it off.
Next step, insert the battery
Before you can use your phone, you must
insert the battery.
1Place the top of the battery on the
phone, with the gold contacts toward
the top of the phone.
2Press down on the bottom of the
battery until it is secure in place.
Last step, replace the back cover
1Place the cover on top of the battery so that none of the battery is
showing.
2Slide the cover up until it clicks into place.
• CHARGE THE BATTERY
Before you use your phone, you need to charge it.
1Connect the lead from the charger to the bottom of the phone.
2Connect the charger to an AC wall outlet.
8265_1.BOOK Page 10 Friday, October 19, 2001 3:06 PM
[ 11 ]
Phone setup 3
If the phone is turned on, the messages, Charger connected and
Charging appear. The battery power indicator bar starts to scroll up
and down (see diagram on page17).
•You can use the phone while the battery is charging.
Important: If the phone becomes hot while you’re making a call,
disconnect your phone from the charger.
•If the battery is discharged, it will take a few minutes before the
charging indicator appears on the screen. The time it takes to
charge the battery depends on the charger you use.
•The battery is fully charged when the battery indicator bar stops
scrolling and the battery full message appears (if the phone is on).
3Disconnect the charger from the AC outlet and the phone.
When the charger is not in use
When the charger is not in use, disconnect it from the power source.
Do not leave the battery connected to the charger for longer than a week.
Overcharging the battery could shorten its lifespan. If a fully-charged
battery is not used, it will discharge itself over time.
• REMOVE THE BATTERY
To remove the battery:
1 Make sure the phone is off.
2 Remove the phone’s back cover.
3Grasp the ridge at the base of the
battery and lift it out.
8265_1.BOOK Page 11 Friday, October 19, 2001 3:06 PM
[ 12 ]
44Phone basics
This section gives a brief introduction to the phone and shows quick steps
for making, answering, and managing your calls. The rest of this guide
provides complete details on phone use.
• YOUR NOKIA 8265 PHONE
End key
Earpiece
Right selection key
Volume key
Talk key
Microphone
Screen
Up scroll key
Down scroll key
Power key
Keypad
Left selection key
8265_1.BOOK Page 12 Friday, October 19, 2001 3:06 PM
[ 13 ]
Phone basics 4
• ABOUT THE ANTENNA
Your phone has a built-in antenna.
As with any other radio transmitting
device, do not touch the antenna
unnecessarily when the phone is
switched on. Contact with the antenna
affects call quality and may cause the
phone to operate at a higher power level than otherwise needed.
Note: Watch for possible overheating. It is normal for your phone
to become hot during use. If the phone becomes too hot, it
automatically drops the current call and returns to the Start screen.
You will not be able to make or receive calls until the phone cools.
• LEARN THE KEYS
Below is a table of your wireless phone keys and what they do.
Key What it does
Power: Press and hold this key to switch the phone on
or off. Also, briefly press this key to display a list of
profiles.
Selection: Press left or right to choose the option shown
by the word above the key. Your phone has one selection
key with a right and a left arrow. This guide refers to
these arrows as if they were two separate keys: (
and )
Talk: Press this key to make a call to the name or
number shown on the screen, or to answer a call.
When this key is pressed, the first of seven names or
numbers you’ve most recently dialed appears. Scroll
through the list. Press this key again to call a name or
number shown on the list.
Back
of phone
8265_1.BOOK Page 13 Friday, October 19, 2001 3:06 PM
[ 14 ]
4
End: Press this key to end a call or silence the ring from
an incoming call. Also, press this key to return to the
Start screen from any location.
0 key: Press this key to insert a blank space while
entering text.
1 Key: Press and hold this key to call your voice mailbox.
- Numbers and Letters: Use keys 2 through 9 to enter
numbers and letters.
Symbols: Press this key to enter special characters, such
as punctuation marks.
Symbols: Press this key to enter special characters.
Scroll keys: Press this key to scroll up or down through
a list of options.
Your phone has one scroll key with an up and a down
arrow. This guide refers to these arrows as if they were
two separate keys: and .
Key What it does
8265_1.BOOK Page 14 Friday, October 19, 2001 3:06 PM
[ 15 ]
Phone basics 4
Power Key
To turn the phone on or off, press and hold the Power key. The Power key is
on the upper-right, top portion of the phone.
Warning: Do not switch on the phone where wireless phone use
is prohibited, or where the use of a phone might cause
interference or could be a danger.
Start screen
When you turn on your phone, a Nokia welcome
and the Start screen appears. The Start screen is
the “home base" for your phone.
To return to home base from any screen,
press.
• NAVIGATION KEYS
Selection keys
Use the selection keys to navigate through and select phone options.
At the Start screen, two options appear: Menu and Names.
The left and right selection keys are just below these options.
•The left selection key is located under Menu.
•The right selection key is located under Names.
Note: Your phone has one selection key with a
right and a left arrow. This guide refers to these
arrows as if they were two separate keys:
and .
When you press the left selection key at the Start screen, the word
Messages appears. The text above the left selection key changes to Select
and the text above the right selection key changes to Exit.
Left
Right
8265_1.BOOK Page 15 Friday, October 19, 2001 3:06 PM
[ 16 ]
4When you press the right selection key at the start screen, options for the
Names feature list appear. The text above the left selection key changes to
Select and the text above the right selection key changes to Exit.
Note: This guide refers to the selection keys by the names that
appear above them. For example, Press Menu means to press the
key located below the word Menu on the phone’s screen ().
Scroll bar
When you press Menu, a scroll bar appears on the right side of the screen.
This scroll bar has a tab which indicates your location in the menu (see
diagram below).
As you progress through the menu, the tab moves down to the next position
on the scroll bar. If you scroll back through the menu, the tab moves up.
• ICONS AND INDICATORS
You have two types of identifiers on your phone: icons and indicators.
Icons are graphical representations of a specific item or situation. For
example, an icon appears when you have a voice message in your mailbox.
Indicators show the status of something. The phone uses three types of
indicators: signal strength, battery power, and handset volume.
Scroll bar: This view shows the scroll bar
down three tab positions from the
beginning of the menu list. The number 3
appears above the scroll bar, showing the
Tab
8265_1.BOOK Page 16 Friday, October 19, 2001 3:06 PM
[ 17 ]
Phone basics 4
1Signal strength. This indicator shows the signal strength of the
wireless network at your current location. The higher the bar, the
stronger the signal.
2Battery power. This indicator shows the battery charge level. The
higher the bar, the more power in the battery.
3Handset volume. This indicator appears only when you press the
volume keys. It illustrates the volume level during a call.
• REVIEW PHONE SYMBOLS
The table below shows what each icon means.
Key What it means
You have an active call.
The phone is waiting for you to enter a response.
You have selected Silent as the current profile.
The keyguard has been activated to prevent any accidental
key presses.
You have one or more voice messages waiting.
You have one or more unread text messages waiting.
Signal
strength
indicator
Battery
power
indicator
8265_1.BOOK Page 17 Friday, October 19, 2001 3:06 PM
[ 18 ]
4
Digital service is available.
Any alpha characters you enter will be uppercase (capital
letters). Press to switch between upper and
lowercase letters.
Any alpha characters you enter will be lowercase. Press
to switch between upper and lowercase letters.
You are in predictive text mode. You can enter words by
pressing each number key only once for each letter.
This appears when you press and hold while storing
names. After switching to this numbers mode, you cannot
enter any alpha characters. You can enter only numbers.
This appears when you press while storing names.
You are in special character mode. You can select a special
character by pressing Insert.
The alarm clock is set.
You have a reminder in your calendar to do something.
(Appears only on Calendar display.)
You have a birthday reminder in your calendar (Appears
only on Calendar display).
You have a reminder in your calendar to call someone.
(Appears only on Calendar display.)
You have a reminder in your calendar of a meeting.
(Appears only on Calendar display.)
Key What it means
8265_1.BOOK Page 18 Friday, October 19, 2001 3:06 PM
[ 19 ]
Phone calls 5
5Phone calls
Adjust the earpiece volume
You can adjust the earpiece volume during a call, or at any time, by pressing
the volume keys on the upper left side of the phone.
•Press the top portion of the key increase the volume.
•Press the bottom portion to decrease the volume.
Feature What to do
Turn off
Keyguard
Deactivates the keyguard if it is on.
Nokia recommends that you use the feature called
Keyguard. Keyguard locks your key pad to prevent you
from making calls unintentionally. To deactivate or
activate Keyguard, pressand.
Make a call
Hold the phone as you would any other telephone,
with the earpiece over your ear and the microphone
near your mouth. Enter the phone number—including
the area code—and press.
End a call Press to end the call or to cancel the call
attempt.
Answer a
call
When your phone rings, press any key to answer, or
press .
Tip: You can mute the ringing of an incoming
call by pressing, or press the power key
quickly.
Redial last
dialed
number
Presstwo times.
If the number is not there, return to the Start screen
by pressing.
8265_1.BOOK Page 19 Friday, October 19, 2001 3:06 PM
[ 20 ]
5Use caller ID
Caller ID is a network service that identifies incoming calls. Contact your
service provider to find out how to get this feature.
When Caller ID is active, your phone shows the caller’s phone number
during an incoming call, as long as this number is a part of your service
provider’s wireless network.
The wireless network lets you know if it doesn’t recognize the calling
number. The wireless network will also let you know if the calling party has
blocked the Caller ID feature.
If you have stored the name and number of the calling party in your phone
book and that number is supported by the wireless network, the caller’s
name might also appear.
Get a strong signal
Your phone operates on radio waves. The quality of radio reception depends
on the strength of the radio signal in your area. This radio coverage is
maintained by a wireless network, and the quality of calls on a wireless
phone depends on the strength of the wireless radio signal.
Check signal strength
When you are at the Start screen or on a call, the strength of the radio
signal is indicated by the signal indicator on the left side of your phone’s
screen. The signal indicator move up as the strength of the signal increases
and down as it decreases. Increasing your phone’s signal may be easy. Try
moving your phone slightly, or move toward a window if you’re calling from
inside a building.
This phone is optimized for digital service in a compact size. Therefore,
when your phone is operating in analog mode, the service area in which you
can place and receive calls may be limited.
Keep calls private
The voice privacy feature encrypts the voice channel so that people cannot
eavesdrop on your phone conversations.
8265_1.BOOK Page 20 Friday, October 19, 2001 3:06 PM
[ 21 ]
Phone calls 5
Voice privacy is a network service, so you must contact your service provider
to obtain access to the feature.
To turn on Voice Privacy:
1Press Menu >Settings > Network services > Voice privacy.
2Scroll to On and press .
During a call, voice privacy becomes active and notifies you with a beep. The
message Voice privacy active also appears on the screen.
To turn off Voice Privacy:
1Press Menu >Settings > Network services > Voice privacy.
2Scroll to Off and press .
Note: If you turn this feature on and voice privacy becomes
inactive for any reason, your phone beeps and displays the
message Voice privacy not active.
8265_1.BOOK Page 21 Friday, October 19, 2001 3:06 PM
[ 22 ]
66Phone menus
• NAVIGATE MENUS
A menu is a list of choices you can make. Your phone has 9 main menus.
Each main menu contains numerous submenus that allow you to use the
phone book, change the ringing tone, and so on. You can use menus and
submenus two ways: by scrolling or by using shortcuts.
Scroll through menus
1From the Start screen, press Menu, then scroll through the menus
using the and keys.
2Press,to select the desired option and submenus.
3Pressto return to the Start screen from any location.
Use a shortcut
Options are numbered so that you can quickly key press your way to an
option. The numbers appear in the top right corner of the screen and show
your location in the menu. For example, if you want to customize a ringing
option, from the Start screen, press:
For Shortcut: Menu 3-1-2-1
For Scrolling: Menu > Profiles > Customize > Ringing Options
When the ringing options appear, scroll to your selection and press.
Note: Don’t pause too long between numbers. The phone
remembers the last key pressed for only about 2 seconds.
Exit menu levels
•To return to the previous menu level, press Back or Exit.
•To return to the Start screen, press . If you leave a menu in this
manner, no menu setting changes are saved.
•Some menus may not appear. Ask your service provider for details.
8265_1.BOOK Page 22 Friday, October 19, 2001 3:06 PM
[ 23 ]
Phone menus 6
Get help
For most of the menu items in your phone, a brief help text is provided. To
view the help text of a menu item, scroll to an item and wait 5 seconds.
Your phone menu may differ from the following list, depending on the
network services to which you have subscribed and the accessories you are
using. If you have any questions, call your service provider.
• SHORTCUTS
Text messages . . . . . . . . . . . . . . . . . . 1-1
Inbox . . . . . . . . . . . . . . . . . . . . . . . . . 1-1-1
Saved . . . . . . . . . . . . . . . . . . . . . . . . . 1-1-2
Write message. . . . . . . . . . . . . . . . . . 1-1-3
Outbox. . . . . . . . . . . . . . . . . . . . . . . . 1-1-4
Write e-mail . . . . . . . . . . . . . . . . . . . 1-1-5
Erase all . . . . . . . . . . . . . . . . . . . . . . . 1-1-6
All read. . . . . . . . . . . . . . . . . . . . . . 1-1-6-1
All in inbox. . . . . . . . . . . . . . . . 1-1-6-2
All saved. . . . . . . . . . . . . . . . . . 1-1-6-3
All in outbox . . . . . . . . . . . . . . 1-1-6-4
Voice messages. . . . . . . . . . . . . . . . . . 1-2
Listen to voice messages . . . . . . . . . 1-2-1
Voice mailbox number . . . . . . . . . . . 1-2-2
Welcome Note . . . . . . . . . . . . . . . . . . 1-3
Missed calls . . . . . . . . . . . . . . . . . . . . 2-1
Dialed calls. . . . . . . . . . . . . . . . . . . . . 2-2
Received calls. . . . . . . . . . . . . . . . . . . 2-3
Clear call lists. . . . . . . . . . . . . . . . . . . 2-4
Call timers . . . . . . . . . . . . . . . . . . . . . 2-5
1MESSAGES
2CALL LOG
8265_1.BOOK Page 23 Friday, October 19, 2001 3:06 PM
[ 24 ]
6
Normal. . . . . . . . . . . . . . . . . . . . . . . . 3-1
Select . . . . . . . . . . . . . . . . . . . . . . . . . 3-1-1
Customize. . . . . . . . . . . . . . . . . . . . . . 3-1-2
Ringing options . . . . . . . . . . . .3-1-2-1
Ringing volume . . . . . . . . . . . .3-1-2-2
Ringing tone. . . . . . . . . . . . . . .3-1-2-3
Vibrating alert . . . . . . . . . . . . .3-1-2-4
Keypad tones . . . . . . . . . . . . . .3-1-2-5
Warning and game tones . . . .3-1-2-6
Message alert tone . . . . . . . . .3-1-2-7
Lights . . . . . . . . . . . . . . . . . . . .3-1-2-8
Automatic answer . . . . . . . . . .3-1-2-9
Rename a profile. . . . . . . . . . . . . . . . 3-1-3
Silent . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Meeting . . . . . . . . . . . . . . . . . . . . . . . 3-3
Outdoor . . . . . . . . . . . . . . . . . . . . . . . 3-4
Pager . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Car . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Headset . . . . . . . . . . . . . . . . . . . . . . . 3-7
Call settings. . . . . . . . . . . . . . . . . . . . 4-1
Emergency key 9 . . . . . . . . . . . . . . . . 4-1-1
Automatic redial . . . . . . . . . . . . . . . . 4-1-2
Calling card . . . . . . . . . . . . . . . . . . . . 4-1-3
Phone settings. . . . . . . . . . . . . . . . . . 4-2
Clock. . . . . . . . . . . . . . . . . . . . . . . . . . 4-2-1
Alarm clock . . . . . . . . . . . . . . . . . . . . 4-2-2
Touch tones . . . . . . . . . . . . . . . . . . . . 4-2-3
Manual touch tones. . . . . . . . .4-2-3-1
3PROFILES
4SETTINGS
8265_1.BOOK Page 24 Friday, October 19, 2001 3:06 PM
[ 25 ]
Phone menus 6
Touch tone length . . . . . . . . . . 4-2-3-2
Restore factory settings. . . . . . . . . . 4-2-4
Language . . . . . . . . . . . . . . . . . . . . . 4-2-5
English . . . . . . . . . . . . . . . . . . . 4-2-5-1
French. . . . . . . . . . . . . . . . . . . . 4-2-5-2
Spanish. . . . . . . . . . . . . . . . . . . 4-2-5-3
Portuguese. . . . . . . . . . . . . . . . 4-2-5-4
Russian. . . . . . . . . . . . . . . . . . . 4-2-5-5
Hebrew. . . . . . . . . . . . . . . . . . . 4-2-5-6
Traditional Chinese . . . . . . . . . 4-2-5-7
Security settings. . . . . . . . . . . . . . . . . 4-3
Restrict calls . . . . . . . . . . . . . . . . . . . 4-3-1
Restrict outgoing calls . . . . . . 4-3-1-1
Restrict incoming calls . . . . . . 4-3-1-2
Access codes . . . . . . . . . . . . . . . . . . . 4-3-2
Phone book . . . . . . . . . . . . . . . 4-3-2-1
Unlocked phone number. . . . . 4-3-2-2
Change lock code . . . . . . . . . . 4-3-2-3
Change security code . . . . . . . 4-3-2-4
Hidden voice mailbox password4-3-2-5
8265_1.BOOK Page 25 Friday, October 19, 2001 3:06 PM
[ 26 ]
6Auto update of date and time . . . . . . 4-4
On. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4-1
Confirm first. . . . . . . . . . . . . . . . . . . . 4-4-2
Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4-3
Network services . . . . . . . . . . . . . . . . 4-5
Voice privacy . . . . . . . . . . . . . . . . . . .4-5-1
Call forwarding . . . . . . . . . . . . . . . . . 4-5-2
Call waiting . . . . . . . . . . . . . . . . . . . . 4-5-3
Send own number . . . . . . . . . . . . . . .4-5-4
Network feature setting . . . . . . . . . . 4-5-5
Own number selection . . . . . . . . . . .4-5-6
Public system selection. . . . . . . . . . .4-5-7
Digital/analog selection . . . . . . . . . . 4-5-8
Automatic . . . . . . . . . . . . . . . . . . . . . 5-1
Manual. . . . . . . . . . . . . . . . . . . . . . . . 5-2
New Search . . . . . . . . . . . . . . . . . . . . 5-3
5SYSTEM
6ORGANIZER
7CALCULATOR
8GAMES
9SERVICES
10 KEYGUARD
8265_1.BOOK Page 26 Friday, October 19, 2001 3:06 PM
[ 27 ]
Phone menus 6
• PHONE BOOK MENU
For access to the phone book and its menus:
•Return to the Start screen.
•Press Names.
These options are available:
Find . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Add entry. . . . . . . . . . . . . . . . . . . . . . . . 2
Edit Name . . . . . . . . . . . . . . . . . . . . . . . 3
Add number . . . . . . . . . . . . . . . . . . . . . . 4
Erase . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
One by one. . . . . . . . . . . . . . . . . . . .5-1
Erase all . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Options . . . . . . . . . . . . . . . . . . . . . . . . . 6
Phone book view. . . . . . . . . . . . . . . . . . 6-1
Name list . . . . . . . . . . . . . . . . . . . 6-1-1
Name only . . . . . . . . . . . . . . . . . . 6-1-2
Name+number. . . . . . . . . . . . . . . 6-1-3
Memory status . . . . . . . . . . . . . . . . . . . 6-2
1-touch dialing . . . . . . . . . . . . . . . . . . . 7
8265_1.BOOK Page 27 Friday, October 19, 2001 3:06 PM
[ 28 ]
77Letters and numbers entry
Note: For text messages and calendar notes, you can use
predictive text input. This method is covered in “Write with
predictive text input” on page 83.
• ENTER LETTERS
When you want to add new names or view names in the phone book, your
phone automatically switches to the ABC mode and displays the icon.
Press the key containing your letter until it appears on the screen. For
example, press three times to enter the letter C.
Key Characters Key Characters
1. , ’ ? ! @ - 1 7PQRS7
2ABC2 8TUV8
3DEF3 9WXYZ9
4GHI4 0Enters an empty space or 0
5JKL5 *Special characters
6MNO6 #Changes letter case; long
press toggles between ABC/
abc and 123 mode
8265_1.BOOK Page 28 Friday, October 19, 2001 3:06 PM
[ 29 ]
Letters and numbers entry 7
Edit names
To edit a name in the phone book:
•Use the scroll key to move the cursor to the left or right.
•Press Clear to correct any mistakes.
Change from capital (uppercase) letters
To switch between capital letters (uppercase) and lowercase letters:
•Press the key.
The icon switches to , indicating that you are using
lowercase.
•To switch back to uppercase, press the key again.
Use punctuation and special characters
When in ABC mode, you can enter special characters. To do so, press the
key. The following special characters appear:
. , @ ? ! : ; - + # * ( ) ‘ “ _ & $ % / < > =
•Use the scroll key to move to the character and press Insert.
•Press to move quickly up and down between rows of characters.
Tip: If you want to access a special character that appears toward
the end of this list, press for quicker access.
• ENTER NUMBERS
You use the 123 mode to enter numbers only. When you’re in 123 mode, the
screen shows the icon.
Note: You cannot enter special characters in mode from the
special characters list. If you are in mode, press and hold the
key for 2 seconds. The icon appears, enabling you to
enter numbers.
•To return to mode, press and hold the key again for two
8265_1.BOOK Page 29 Friday, October 19, 2001 3:06 PM
[ 30 ]
7seconds.
List of special characters
Your phone provides special characters you can use to insert "wait" times
into a number.
•To insert the following characters into a number, press the key
several times.
•Continue entering the rest of the number as usual.
pUse to create a pause when a number is dialed.
The numbers you enter after this special character
are automatically sent as touch tones after a
2.5-second pause.
wUse to create a “wait” when a number is dialed.
This means that your phone waits for you to press before it
sends the number as touch tones.
8265_1.BOOK Page 30 Friday, October 19, 2001 3:06 PM
[ 31 ]
Phone book 8
8Phone book
• ABOUT THE PHONE BOOK
Your phone includes a phone book that can store up to 250 names and
associated phone numbers. Stored numbers can be up to 32 digits long.
Stored names can be up to 26 characters long.
MAKE ENTRIES UNIQUE
You cannot store identical names in your phone.
Example: You can’t have one entry for John Jones with a home number
and another entry for John Jones with a work number. Store the
names as John Jones Work and John Jones Home.
If you enter a name that’s already in your phone book, the message
Replace? appears, followed by the currently stored name.
Press Back to end this sequence without replacing the name.
• USE PHONE BOOK MENUS
The phone book has several menus from which you can choose. These
menus appear when you press Names. Use the scroll keys to move to the
menu you want to use.
Menu Name What it does
Search Allows you to search for a specific name.
Add new Allows you to enter new names and numbers.
Options Allows you to choose your scrolling view and to
show the memory status.
1-touch dialing Allows you to assign up to seven 1-touch dial
locations.
8265_1.BOOK Page 31 Friday, October 19, 2001 3:06 PM
[ 32 ]
8
Change views
You can view your phone book in three different ways:
1Name list. Shows all the names that are stored in your phone book.
Three names appear on the screen at a time.
2Name + number. Shows individual names and numbers. Only one
name appears on the screen at a time, with its corresponding phone
number. Name + number is the default setting.
3Name only. Displays individual names only. You can view the
corresponding phone number by pressing Details and scrolling up or
down.
In all views, you can use the scroll keys to move up and down through the
list of names.
Select a scrolling view
1Press Names.
2Scroll to Options, then press Select.
3At Scrolling view, press Select.
4Scroll to the view you want and press OK.
Caller groups Allows you to rename or change the ringing tone
for a caller group, as well as turn the group
graphic on or off.
Erase all Allows you to erase all names and numbers in the
phone book. To erase only one name and number
at a time, while viewing a name in the phone book
press Details or Options, then scroll to Erase and
press Select.
Menu Name What it does
8265_1.BOOK Page 32 Friday, October 19, 2001 3:06 PM
[ 33 ]
Phone book 8
• ADD NAMES AND NUMBERS
1Press Names.
2Scroll to Add new and press Select.
3Using the keypad, enter the name.
4Use the key to switch between upper
and lowercase letters.
5Press OK.
6Enter the phone number and press OK.
SHORTCUT
You can also enter numbers by using a shortcut from the Start screen.
1Enter a phone number and press Save.
2Enter a name at Name (optional).
3Press OK.
• CHANGE A STORED TELEPHONE NUMBER
You can change a number without changing its associated name.
1Press Names.
2At Search, press Select.
3Enter the first few letters of the first name of the person for whom
you are searching and press OK.
4If you chose Name only or Name list as your scrolling view, continue
to step 4. If you chose Name+number as your scrolling view, go to
step 5.
5Press Details to view the number.
6Press Options.
7If Edit is not highlighted, scroll to Edit and press Select.
8Press OK.
8265_1.BOOK Page 33 Friday, October 19, 2001 3:06 PM
[ 34 ]
89The associated number appears.
10 Press Clear to erase one number at a time, or press and hold Clear to
erase all the numbers on the screen.
11 Use the scroll key to move within the digits in the number.
12 Enter the new number.
13 Press OK to save the new number.
• RECALL AND REDIAL NUMBERS
You can recall and dial numbers using one of three methods:
1At the Start screen, scroll to display the names and associated
numbers that are stored in your phone book.
Scroll to the appropriate name and press to dial the associated
number.
OR
2At the Start screen, press Names.
Begin entering the first few letter of the name you want to call.
When the appropriate name/number appears on the screen, press
to dial this number.
OR
3At the Start screen, press Names.
At Search, press Select.
Enter the name of the person you want to call and press OK.
When the appropriate name/number appears on the screen, press
to dial this number.
8265_1.BOOK Page 34 Friday, October 19, 2001 3:06 PM
[ 35 ]
Phone book 8
• ERASE STORED NAMES AND NUMBERS
Caution:You cannot undo Erase functions.
1Using one of the methods described in “Recall and redial numbers” on
page 34, recall the stored name and its associated number.
If you chose Name only as your scrolling view, go to step 2.
If you chose Name+number as your scrolling view, go to step 3.
2Press Details.
3Press Options.
4Scroll to Erase, then press Select.
5The Erase? message appears.
6Press OK to erase this name and associated number.
• ERASE THE ENTIRE PHONE BOOK
You can erase the contents of your phone book. This action cannot be
reversed. After you have performed this procedure, all the stored
information in your phone book is erased.
To erase all the contents of your phone book:
1Press Names.
2Scroll to Erase all and press Select.
3The message Are you sure? appears.
4To erase the entire contents of your phone book, press OK.
5The Security code field appears.
6Enter your security code and press OK.
8265_1.BOOK Page 35 Friday, October 19, 2001 3:06 PM
[ 36 ]
8 • CHECK MEMORY STATUS
You can check to see how many free and in-use memory locations are in
your directory.
1Press Names and scroll to Options.
2Press Select.
3Scroll to Memory status and press Select
again.
A message appears, Phone: xx free, xx in use.
The xx indicates the number percentage of
memory locations (phone entries) available and
in use.
Under
Construction
8265_1.BOOK Page 36 Friday, October 19, 2001 3:06 PM
[ 37 ]
Voice mail 9
9Voice mail
Voice mail is a network services feature. Colleagues who miss you when
they call can leave a voice message that you can retrieve later.
• WHEN YOU HAVE A MESSAGE
•Your phone beeps when you receive a voice message. Also, the message
New voice message appears on your phone’s screen, along with the
icon.
•If you have received more than one voice mail message, depending on
your wireless network your phone may display the number of messages
that you have received.
Note: To use voice mail, you need to learn the voice mail system’s
various greetings, passwords, and prompts. Your service provider
can provide instructions.
• SET UP YOUR VOICE MAILBOX
As part of your network’s voice mail feature, your service provider gives you
a voice mailbox phone number. Save this number in your phone to make
getting your voice messages quick and convenient.
1Press Menu 1-2-2 (Messages > Voice messages > Voice mailbox
number).
2Enter your voice mailbox phone number.
3Press OK.
•Press Yes to save a hidden voice mailbox password in your phone.
Enter your security code.
•Press No if you don’t.
4Press OK.
5Enter your voice mailbox password and press OK.
8265_1.BOOK Page 37 Friday, October 19, 2001 3:06 PM
[ 38 ]
9Your voice mailbox number can be up to 32 digits long and is used until it’s
changed. Therefore, if your phone number changes, you may need to change
your voice mailbox number along with it.
• SET GREETINGS AND PASSWORDS
These may vary in different wireless systems. If you need information about
how to record your greeting or how to store your password, contact your
service provider.
Note: If you store your voice mailbox password in your phone, the
phone immediately sends the password after you dial your voice
mailbox number.
• LISTEN TO YOUR VOICE MESSAGES
Note: The way you listen to your voice messages may vary
depending upon your service provider. Call your service provider if
you have any questions.
1When your phone alerts you to new voice messages, press Listen and
follow the instructions given on the phone.
2If you prefer to listen to your messages later, press Exit.
3To listen to your voice messages at a later time:
Press and hold the 1 key.
OR
Press Menu 1-2-1 (Messages < Voice messages < Listen to voice
messages).
The message Calling voice mailbox appears on the screen. Follow the
prompts to access your messages.
8265_1.BOOK Page 38 Friday, October 19, 2001 3:06 PM
[ 39 ]
Call log 10
10 Call log
The call log keeps track of:
•Missed calls
•Numbers you’ve dialed
•Numbers from which you’ve received calls
•The amount of time you’ve spent on calls
• CHECK THE CALL LOG
Press Menu 2 to access Call log, then press Select.
The following submenus are available:
•Missed calls
•Dialed calls
•Received calls
•Clear call lists
•Call timers
To select an option, press the Select key while the option is displayed on
the screen. Missed calls, Dialed calls, and Received calls menus include
the following options (available when you press the Options key):
Option What it does
Call time Shows the date and time when the call was
connected—if the clock has been set.
Edit number Allows you to edit the number shown on the
screen.
Save Allows you to save the displayed number into your
phone book.
8265_1.BOOK Page 39 Friday, October 19, 2001 3:06 PM
[ 40 ]
10
Tip: You can dial any numbers that appear on the phone screen
by pressing.
Check missed calls
Your phone stores up to the last 10 numbers associated with calls you have
missed. When you miss a call(s), the message Missed calls appears on your
phone’s screen, along with the number of calls missed.
You are notified of missed calls only if your phone was turned on in the
original service area of your service provider.
To check missed calls:
1Press List. The phone shows the numbers of the calls you missed.
2Scroll through the list until you reach a number to be dialed.
3Press to start dialing, or
4Press Back to return to the Start screen.
Tip: Use the shortcut by pressing Menu 2-1 (Call log > Missed
calls), then scroll through the list of numbers.
Note: If you selected Forward if not answered option in Call
Forwarding, then your phone treats these forwarded calls as
missed calls.
Erase Allows you to erase the displayed number from
the call log.
View number Allows you to view a number when an associated
name appears on the screen.
Note: This option works only if you have stored
the associated number in the phone book.
Option What it does
8265_1.BOOK Page 40 Friday, October 19, 2001 3:06 PM
[ 41 ]
Call log 10
Check previously dialed calls
Your phone stores the last 10 numbers that you have
dialed. To check this list of numbers:
1Press Menu 2-2 (Call log > Dialed calls).
2Scroll through the dialed numbers list.
3When you reach the number you want to dial, press.
You can also access previously dialed numbers by pressing and
, or scroll through the list.
Check received calls
Your phone stores up to the last 10 numbers associated with calls that you
have answered. To check this list of numbers:
1Press Menu 2-3 (Call log > Received calls).
2Scroll through the list of received numbers.
3When you reach the number you want to dial, press .
Clear call lists
You can erase some or all of the numbers that appear in your phone’s call
log. You can erase dialed numbers, received call numbers, or missed call
numbers.
Warning: You cannot undo this operation.
To erase some or all of the numbers listed in your call logs:
1Press Menu 2-4 (Call log > Clear call lists).
2Scroll through the options list, which includes the following options:
All, Missed, Dialed, and Received.
3Stop at the appropriate option and press OK.
Note: The All option clears every number in every list, whereas the
other options clear only the numbers associated with that option.
For example, the Dialed option clears only the numbers associated
with calls you previously dialed.
8265_1.BOOK Page 41 Friday, October 19, 2001 3:06 PM
[ 42 ]
10 • CHECK CALL TIMERS
Your phone tracks the amount of time you spend
on each call. To obtain information about time
spent on phone calls:
1Press Menu 2-5 (Call log > Call timers).
2Scroll through the options described in the
following list:
Warning: If you select the Clear timers option, the action
cannot be undone. If you use the call timers to log or track the
amount of time you are using your phone, you might want to
record the information in the call timers before you erase them.
Turn on a current call timer
You can set your phone to display the running elapsed time while a call is
active. To do so:
Option What it does
Last call Shows the call duration of the last call made.
Dialed calls Shows the duration of all outgoing calls since you
reset the timers.
All calls Shows the call duration of all calls that have been
made and received since you reset the timers.
Life timer Shows the duration of all calls for the life of your
phone. This option cannot be reset.
Clear timers Clears all call timers for the currently selected
phone number. Your phone includes separate
timers for each number used, with the exception
of the Life timer.
8265_1.BOOK Page 42 Friday, October 19, 2001 3:06 PM
[ 43 ]
Call log 10
1Press Menu 2-5 (Call log > Call timers).
2Press Details. Current call timer appears.
3Press Select.
4Scroll to On.
5Press OK.
From this point on, each call you make or receive will be timed. After a
call has ended, press any key on your phone to clear the screen.
Clear call timers
1Press Menu 2-5-5 (Call log > Call timers > Clear timers).
The security code field appears.
2Enter your security code
3Press OK.
8265_1.BOOK Page 43 Friday, October 19, 2001 3:06 PM
[ 44 ]
11 11 Advanced calling features
• SET IN-CALL OPTIONS
Your phone allows you to use a number of features
during a call. These features are known as in-call
options.
Note: Many in-call options are network
services features. To use these options, you must contact your
service provider.
You cannot use all options at all times. This section tells you when you can
use a certain option.
1To access an option during a call, press Options.
2Choose from some or all of the following options:
Option What it does
Lock keys Locks your phone’s keypad. This option appears first if
your phone is connected to a headset. if it is not
connected to a headset, the Mute option appears first.
Mute Mutes the phone’s microphone. If the microphone has
already been muted, End mute appears instead of
Mute.
Press OK to choose either of these options.
These options can affect the microphones of any
accessories connected to the phone.
Touch tones Allows you to enter a touch tone string manually or
search for a string in your phone.
New call Allows you to make a call while you have a call in
progress. Refer to “Make a conference call” on page 46
for additional information.
8265_1.BOOK Page 44 Friday, October 19, 2001 3:06 PM
[ 45 ]
Advanced calling features 11
• USE CALL WAITING
If you have call waiting, your phone beeps during a call to let you know that
someone else is calling you. Depending on your caller ID setup, the phone
might also display the number of the incoming call.
Before you can use call waiting, you must first store its feature code.
Then you must activate the call waiting feature.
Note: Call waiting may not be available in all wireless systems.
Contact your service provider for details and availability.
Store the call waiting feature code
1Press Menu 4-5-5 (Settings > Network services > Network feature
setting). The Feature code box appears.
2Enter the feature code issued by your service provider and
press OK.
3Scroll to Call waiting and press Select.
4Make sure that Activate is highlighted and press OK.
Activate call waiting
1Press Menu 4-5-3 (Settings > Network services > Call waiting).
2Scroll to Activate and press OK.
Your phone calls the network to confirm the feature code you entered. After
the network confirms the feature code, call waiting is activated.
Menu Allows you to access the Menu.
Names Allows you to access the phone book.
Option What it does
8265_1.BOOK Page 45 Friday, October 19, 2001 3:06 PM
[ 46 ]
11 Manage calls
Call waiting works with both local and long distance calls.
•To answer an incoming call, press .
•To switch from one call to another, press .
•To end both calls, press .
Make a conference call
While in a call, you can call another number and "conference in" (add) a
third party to the call.
The conference call feature varies based on wireless systems. Contact your
service provider for details.
1While in a call, you can either dial the number you want to conference
in and press .
OR
You can press Options, scroll to New call, press OK, enter the phone
number, and press OK again.
If you don’t remember the number of the party you want to include in
the conference, and the number is in your phone book, you can recall
the number.
2When the third party answers, press to connect all three parties.
Note: To place one of the parties on hold, press again. If
you press a third time, the party you placed on hold
rejoins the call, and the second party is placed on hold. Once
you place one of the parties on hold, you are unable to rejoin
all three parties.
3To drop all parties, press .
8265_1.BOOK Page 46 Friday, October 19, 2001 3:06 PM
[ 47 ]
Advanced calling features 11
Recall a number from the phone book during a
conference call
If you don’t remember a number that you need to dial while on another
call and this number is in your phone book, you can recall the number
without having to quit your current call.
1During the call, press Options.
2Scroll to Names and press OK.
3Press Select at Search.
4Enter name and press OK, or scroll through the phone book.
5Press OK.
• CALL FORWARDING
With call forwarding, you can forward incoming calls to another number.
If you are unavailable to receive calls on your phone, all incoming calls
can be forwarded to another phone.
Before you can use call forwarding, you must first store its feature code.
Then you must activate the call forwarding feature.
Note: The call forwarding feature may not be available in all
wireless systems. Contact your service provider for details and
availability.
You can use the call forwarding feature code manually as opposed to
storing it. Each time you need to forward phone calls, you must enter the
feature code before the phone number (for example, *72 555 1212).
Store the call forwarding feature code
1Press Menu 4-5-5 (Settings > Network services > Network feature
setting).
The Feature code field appears.
2Enter the feature code your service provider gave you and press .
3Scroll to Call forwarding and press Select.
8265_1.BOOK Page 47 Friday, October 19, 2001 3:06 PM
[ 48 ]
11 Activate call forwarding
1Press Menu 4-5-2 (Settings > Network services > Call forwarding).
2Scroll to the desired call forwarding option, as described in the
following table, and press Select.
3Highlight Activate and press OK.
4At the Number field, either enter the number to which you want your
calls forwarded or press Search to find this number in the phone book
(if the number is indeed in your phone book).
5Press OK.
Option Description
Forward if busy Forwards calls only when you’re on your phone and do
not have voice mail.
Forward all calls Forwards all incoming calls.
Forward if not
answered Forwards calls if you don’t answer. This option is handy
if you want to give your phone to someone for a short
period of time, but you don’t want them to answer the
phone.
For example, you could use this option if you give your
child the phone to take out, in case of an emergency,
but you still want to receive any incoming calls made
to this phone.
Forward if out
of reach Forwards calls if you are out of the serving wireless
network, or if your phone is turned off.
Cancel call
forwarding Cancels all forwarding options that are currently
active.
8265_1.BOOK Page 48 Friday, October 19, 2001 3:06 PM
[ 49 ]
Advanced calling features 11
Your phone calls the network to confirm the feature code that you entered
in Menu 4-5-5. After the network confirms the feature code, call
forwarding is activated.
• REDIAL AUTOMATICALLY
Automatic redial enables your phone to continue trying to call a number
that was busy due to wireless network problems.
When you call a number and get a busy signal because of network problems,
your phone redials this number up to three times. If you want to stop the
automatic redialing process prior to the last attempt, press .
Before you can use the Automatic Redial feature, you must activate it.
1Press Menu 4-1-2 (Settings > Call settings > Automatic redial).
2Scroll to On.
3Press OK.
• USE A CALLING CARD
You can use a calling card when you dial long distance calls. You must first
store your calling card information in the phone. Your phone can store
information for a maximum of four calling cards.
Save calling card information (step 1)
1Press Menu 4-1-3 (Settings > Call settings > Calling card).
2Scroll to the A, B, C, or D calling card and press Options.
3Scroll to Edit and press OK. The Security code field appears.
4Enter your security code and press OK. The Dialing sequence screen
appears.
5Press Select.
6Scroll through the list of dialing sequences, as described in the
following table.
8265_1.BOOK Page 49 Friday, October 19, 2001 3:06 PM
[ 50 ]
11 7Press Select.
The calling cards shown in the table below are frequently used with the
dialing sequences listed in the first column. However, this information may
vary and it is subject to change at the phone companies’ discretion..
Save calling card information (step 2)
The order of the following steps may vary, depending on which dialing
sequence your card uses.
1Enter the number and, when prompted for the calling card’s access
number, enter the number and press OK. This number is usually the
1-800 number that is listed on the back of the calling card.
You can also retrieve the access number from your phone book if it is
stored. Press Search, then scroll to find the number.
2When prompted to enter a calling card number (usually shown on
the front of the calling card) and PIN number, enter the numbers, and
press OK.
3Press OK again when the Save changes? message appears.
Dialing sequence Cards that require you to: Associated cards
1. Access no.
2. Phone no.
3. Card no.
Dial 1-800 access number, then
phone number, then card number
(+ PIN if required).
MCI, Sprint
Canada, Unitel
1. Access no.
2. Card no.
3. Phone no.
Dial 1-800 access number, then
card number (+ PIN if required),
then phone number.
networkMCI,
WorldPhone
MCI, AT&T
1. Prefix
2. Phone no.
3. Card no.
Dial the prefix (any numbers that
must precede the phone number)
and phone number you want to
dial, then card number (+ PIN, if
required).
Verizon, PacBell,
AT&T, Stentor
8265_1.BOOK Page 50 Friday, October 19, 2001 3:06 PM
[ 51 ]
Advanced calling features 11
4Scroll to Card name, press Select, and enter the card name using your
phone’s keypad.
5Press OK.
Choose a calling card to use
If you have more than one calling card, you’ll need to choose one before
making a call.
1Press Menu 4-1-3 (Settings > Call settings > Calling card).
2Scroll to the desired card and press Options.
3Scroll to highlight Select and press OK.
4The Security code field appears.
5Enter your security code and press OK.
6The message Card ready for use appears.
Make a calling card call
To make a calling card call:
1Enter the phone number, including any prefix (such as 0 or 1) your
calling card might require when you make a calling card call. See your
calling card for instructions.
2Press and hold until your phone displays the message Card call
and shows Wait for tone, press OK again.
3After the second tone, press OK again.
4Your phone displays Card call.
Note: This procedure might not apply to all the calling card
options that are programmed into your phone. Check the back of
your calling card for more information, or contact your long
distance company.
8265_1.BOOK Page 51 Friday, October 19, 2001 3:06 PM
[ 52 ]
11 • SEND YOUR OWN NUMBER IN CALLER ID
You can determine, for each call you make, whether your telephone number
appears on another phone’s caller ID.
In most service areas, when you call others, your name is presented to their
caller ID (if they subscribe). With Send Own Number, you can block (or not)
the display of your number to others’ caller ID when you call them.
Before you can use Send Own Number, you must first store its feature code.
Otherwise, this feature might not appear on your phone’s menu.
Note: Send Own Number might not be available in all wireless
systems. Contact your service provider for details and availability.
Also note that this feature is effective only when you call a number
that is equipped with caller ID.
Store the Send Own Number feature code
1Press Menu 4-5-5 (Settings > Network services > Network feature
setting). The Feature code box opens.
2Enter the feature code your service provider gave you and press OK.
3Scroll to Send own number and press Select.
Your phone calls the network to confirm the feature code that you entered
in Menu 4-5-5. After the network confirms the feature code, Send Own
Number is activated.
Set whether or not your number will appear
1Press Menu 4-5-4 (Settings > Network services > Send own
number).
2Scroll to and select Yes (to show your number), or No (not to show it).
3Press OK.
4Enter the number you wish to call (or press Search to retrieve the
number from the phone book), and press OK.
8265_1.BOOK Page 52 Friday, October 19, 2001 3:06 PM
[ 53 ]
Advanced calling features 11
• SELECT A PHONE NUMBER
Your service provider programs your phone number and system information
into your phone’s memory when your phone is first activated. Your phone
can hold up to three numbers. This means that your phone can be activated
in three different service areas. For example, your phone could be activated
in Dallas, Chicago, and New York. Each service area would assign a different
phone number or account to your phone.
You must select a phone number for your home system. Only one phone
number can be active at a time. If you travel outside your home system, you
can choose another number.
Note: One phone number is enough if your service provider has
service or roaming agreements for each area in which you wish to
use your phone. Contact your service provider for details.
Select the phone number
1Press Menu 4-5-6 (Settings > Network services > Own number
selection).
2Scroll to the phone number you want to use and press OK.
Note: The first phone number on this list is the currently selected
number. You need at least one active number to make calls. You
cannot change from one phone number to another during a call.
Select digital or analog
Your phone can work in both digital and analog modes. The default mode is
digital and analog, which appears on your phone as Digit. & analog when
you press Menu 4-5-8 (Settings > Network services > Digital/analog
selection).
Note: This feature is available only for certain phones. Contact
your service provider for more information.
8265_1.BOOK Page 53 Friday, October 19, 2001 3:06 PM
[ 54 ]
11 This means that your phone uses both digital and analog voice channels.
The phone always tries to find a digital voice channel first, but if a digital
voice channel is not available, the phone looks for an analog voice channel.
• SET TOUCH TONES
Touch tones are sounds that are produced when
you press the keys on your phone’s keypad.
Sometimes, touch tones are called DTMF tones, but
this guide calls them touch tones.
You can use touch tones for many automated over-the-phone services such
as checking bank balances and airline schedules and using your voice
mailbox. Touch tones can be sent only when a call is active.
Set manual touch tones
1Press Menu 4-2-3-1 (Settings > Phone settings > Touch
tones > Manual touch tones).
2Select one of the following options:
Continuous. The tone sounds for as long as you press and hold a key.
Fixed. Sets the tone length to 0.1 second, regardless of how long you
press a key.
Off. Turns off the tones. No tones are sent when you press a key.
3Press OK.
Set touch tone length
You can also set the length of each touch tone:
1Press Menu 4-2-3-2 (Settings > Phone settings > Touch
tones > Touch tone length).
2Scroll to Short or Long. Short sets the tone length to .1 second. Long
sets the tone length to .5 second.
3Press OK.
8265_1.BOOK Page 54 Friday, October 19, 2001 3:06 PM
[ 55 ]
Advanced calling features 11
Store touch tone sequences (strings)
You store touch tone strings the same way that you store names and
numbers in your phone book. You can store an entire digit sequence and
send it as touch tones for frequently used strings of numbers.
STORE TOUCH TONE STRINGS WITH PHONE NUMBERS
1Enter the phone number that you want associated with a touch tone.
2Press w or p where needed.
w (wait): When you dial this phone number,
your phone first dials the number, then waits
(because of the w character) for you to press
Send. The phone sends your touch tone when
you press Send.
p (pause): If you include a p character instead of a w, your phone
pauses for 2.5 seconds, then automatically sends your touch tone.
3Enter the touch tone string.
4Store the number as you normally would.
SEND A TOUCH TONE STRING
1Press Menu 4-2-3-1 (Settings > Phone settings > Touch
tones > Manual touch tones).
2Make sure that the setting is not set to Off.
3If the setting is set to Off, scroll to another option and
press OK.
4During your call, press Options, scroll to Touch tones and
press OK.
5Enter the touch tone string or recall the string from the phone book,
and press OK.
Warning: If you send touch tones while in the analog mode, be
careful not to send confidential information.
8265_1.BOOK Page 55 Friday, October 19, 2001 3:06 PM
[ 56 ]
12 12 Personalization
• WHAT IS A PROFILE?
A profile is a "set of settings" you can use to
customize the way your phone works. Your phone
comes with seven profiles:
1Normal (default setting)
2Silent
3Meeting
4Outdoor
5Pager
6Car (available only with car kit)
7Headset (available only with headset)
You can customize any of the profiles and set your own preferences for the
following:
•Ringing options
•Ringing volume
•Ringing tone
•Vibrating alert
•Keypad tones
•Warning & game tones
•Message alert tone
You can return to the original settings at any time by using the normal
profile.
8265_1.BOOK Page 56 Friday, October 19, 2001 3:06 PM
[ 57 ]
Personalization 12
• SELECT A DIFFERENT PROFILE
1Quickly press the Power key.
2Scroll to the profile you want to use. Profile names are highlighted
(selected) as you scroll through them.
3Press OK to select a highlighted profile.
Note: To select a different profile, your phone cannot be
connected to a car kit or a headset, and your phone must be at the
Start screen.
• CUSTOMIZE A PROFILE
1Press Menu 3 (Profiles).
2Scroll to the desired profile in the list.
Note: The Car and Headset profiles do not
appear unless your phone has been connected to these accessories.
If you connect your phone to a car kit or to a headset, these
profiles remain in the menu, unless you choose to restore your
phone’s factory settings.
3Press Options to view the options for the selected profile.
4Select one of the following options, then press OK.
Select. Activates the currently highlighted profile.
Customize. Enables you to customize a profile by changing the
current settings. Press OK to choose from several lists.
Rename. Enables you to rename the profile. This option does not
appear in the Normal, Headset, or Car kit profiles.
Note: When you change a setting in the current profile, it affects
only that profile. Your phone’s normal settings do not change.
8265_1.BOOK Page 57 Friday, October 19, 2001 3:06 PM
[ 58 ]
12 Set ringing options
You can choose the tone that your phone uses to notify you of an incoming
call. This setting does not affect any incoming text message alert tones.
1Press Menu 3 (Profiles). Your phone lists each profile.
2Scroll to the desired profile in the list for which you want to set the
ringing options, and press Options.
3Highlight Customize and press OK.
4Scroll to Ringing options and press Select.
5Scroll to one of the ringing options listed below, and press OK.
Set the ringing volume
You can set the default ringing volume for
incoming voice calls and message alert tones.
1Press Menu 3 (Profiles).
2Scroll to the profile for which you want to set
Option What it does
Ring The phone rings until it is answered.
Ascending Ringing volume increases (gets louder) if the phone
is not answered.
Ring once The phone rings once to indicate an incoming call.
Beep once The phone beeps once to indicate an incoming call.
Caller groups Sets the ring to a silent ring, unless a call comes
from a number within a caller group.
Scroll to the desired caller group(s), then press Mark
to select or Unmark to deselect them.
Silent The phone makes no sound.
8265_1.BOOK Page 58 Friday, October 19, 2001 3:06 PM
[ 59 ]
Personalization 12
the ringing volume, and press Options.
3Highlight Customize and press OK.
4Scroll to Ringing volume and press Select.
5Scroll through the options. When you hear the volume level you wish
to use, press OK.
Note: As you scroll through the ringing options, you can listen to
a sample of each. Although the ringing sample for level 4 and level
5 are the same, ringing level 5 will produce very loud ringing.
The ringing volume setting is stored individually for the handsfree car kit
and the headset.
Set the ringing tone
You can set your phone’s ringing tone to a specific sound—or tune—for
incoming voice calls.
Note: If you have already selected Silent or Beep once in “Set
ringing options” on page 58, the ringing tones are already turned
off.
1Press Menu 3 (Profiles).
Your phone lists each profile.
2Scroll to the profile for which you want to set the ringing tones.
3Press Options.
4Highlight Customize and press OK.
5Scroll to Ringing tone and press Select.
6Scroll through the options, and, when you hear the tone you want to
use, press OK.
Set a vibrating alert
You can set your phone to vibrate to indicate an incoming call.
1Press Menu 3 (Profiles).
2Scroll to the profile for which you want to set the vibrating alert, and
8265_1.BOOK Page 59 Friday, October 19, 2001 3:06 PM
[ 60 ]
12 press Options.
3Highlight Customize and press OK.
4Scroll to Vibrating alert and press Select again.
5Scroll to On and press OK.
The phone does not vibrate when it is connected to or placed in any
charging device.
Set keypad tones
Keypad tones are the sounds you hear when you press your phone’s keys.
You can set the volume for those tones.
1Press Menu 3 (Profiles).
2Scroll to the profile for which you want to set the keypad tones, and
press Options.
3Highlight Customize and press OK.
4Scroll to Keypad tones and press Select.
5Scroll to one of the levels and press OK. (If you choose Off, no keypad
tones are heard.)
If you chose the Silent profile in step 2, the keypad tones are turned off.
Set warning and game tones
You can set warning tones and the tones used for the games in your phone.
Warning tones include the sounds your phone makes during error
conditions, during confirmations, when a battery is low, and when you need
to recharge the battery.
1Press Menu 3 (Profiles).
2Scroll to the desired profile to set the warning tones, press Options.
3Highlight Customize and press OK.
4Scroll to Warning and game tones, and press Select.
5Scroll to On and press OK.
8265_1.BOOK Page 60 Friday, October 19, 2001 3:06 PM
[ 61 ]
Personalization 12
To turn warning or game tones off, scroll to Off and press OK.
Set the message alert tone
You can set your phone to use a certain tone to indicate an incoming
text message.
1Press Menu 3 (Profiles).
2Scroll to the profile for which you want to set the message alert tone,
and press Options.
3Highlight Customize and press OK.
4Scroll to Message alert tone, then press Select.
5Scroll through your choices.
6The phone plays samples of each choice as you scroll to it.
7When you find the tone you want, press OK.
Set your phone to answer automatically
You can set your phone to answer incoming voice calls after one ring.
This feature can be used only when your phone is connected to a headset
or to an approved handsfree car kit that is equipped with the ignition sense
option, with the ignition on.
1Press Menu 3 (Profiles).
2Scroll to either the Car or Headset profile and press Options.
3Car and Headset do not appear unless your phone has already been
connected to a car kit or headset at least one time.
4Highlight Customize and press OK.
5Scroll to Automatic answer and press Select.
6Scroll to On and press OK.
Set the lights (car kit only)
While your phone is connected to a car kit, you can either set its lights to
be on only when you use it, or you can have the lights on continuously.
8265_1.BOOK Page 61 Friday, October 19, 2001 3:06 PM
[ 62 ]
12 This feature works only when your phone is connected to a car kit.
1Press Menu 3 (Profiles).
2Scroll to Car and press Options.
Note: Car does not appear in the list unless the phone is connected
to a car kit.
3Highlight Customize and press OK.
4Scroll to Lights and press Select.
5Scroll through your choices, which are listed and described in the
table below, and press OK.
Automatic. Turns off the lights within 15 seconds if no keys are
pressed.
On. Lights remain on the entire time your phone is connected to the car
kit.
• RENAME PROFILES
1Press Menu 3 (Profiles).
2Scroll to the desired profile and press Options.
3Scroll to Rename and press OK.
4Enter the new name and press OK.
Note: You cannot rename the Normal, Headset, and Car kit
profiles.
• RESTORE FACTORY SETTINGS
If you have made changes to your phone’s profiles (settings), you can
restore them to their original or factory settings. You must enter a security
code to reset your phone’s factory settings.
8265_1.BOOK Page 62 Friday, October 19, 2001 3:06 PM
[ 63 ]
Personalization 12
Note: The memory, timers, language selection, security code, and
lock codes are not reset. However, any profiles you have modified
are reset.
1Press Menu 4-2-4 (Settings > Phone settings > Restore factory
settings).
2Enter your security code and press OK.
• SET THE DISPLAY LANGUAGE
You can set your phone to display a certain
language.
1Press Menu 4-2-5 (Settings > Phone
Settings > Language).
2Scroll to the language you want to use and
press OK.
You can choose from English, French, Spanish, Portuguese, Russian, and
Hebrew.
• SET AND DISPLAY THE CLOCK
Your phone has an internal clock that you can set to
display on the Start screen.
The clock is connected to an alarm clock. Refer to
“Alarm clock” on page 106 for additional
information.
8265_1.BOOK Page 63 Friday, October 19, 2001 3:06 PM
[ 64 ]
12 Set the clock
To set the clock to the appropriate time:
1Press Menu 4-2-1 (Settings > Phone settings > Clock).
2Scroll to Adjust time and press Select.
The Time field appears.
3Enter the time using an xx:xx format and press OK.
For example, to set your clock to 9:30, enter 09:30. If you set the time
format for 24-hour time, enter the number the same way: 09:30 or
23:12.
•If you set time format to am/pm, scroll to am or pm and press OK.
•If you set the time format to 24-hour, the time is set when you
press OK.
Display or hide the clock
After the clock is set, it appears on the Start screen.
1Press Menu 4-2-1 (Settings > Phone settings > Clock).
2To hide the clock, with Hide clock highlighted, press Select.
Only one of these options appears at a time.
3To display the clock once it has been hidden, press Menu 4-2-1
(Settings > Phone settings > Clock). With Display clock highlighted,
press OK.
Select the time format
You can change the way your clock shows the time, whether in am/pm
format or using a 24-hour clock.
1Press Menu 4-2-1 (Settings > Phone settings > Clock).
2Scroll to Time format and press Select.
3Scroll to either am/pm or 24-hour and press OK.
8265_1.BOOK Page 64 Friday, October 19, 2001 3:06 PM
[ 65 ]
Personalization 12
• SET AUTOMATIC DATE AND TIME
You can set your phone to automatically update the date and time from the
network. If the clock in your phone is 2 minutes or more off the network
time, the phone will automatically update the time to reflect the network.
Note: Auto update of date and time may not be available in all
wireless systems. Contact your service provider for details and
availability.
You need to display the clock on the phone’s screen before you turn on the
automatic date and time update. Refer to “Display or hide the clock” on
page 64.
Turn on automatic update of date and time
When you activate the automatic date and time update, the phone updates
both from the network when you turn the phone on.
Press Menu 4-4-1 (Settings > Phone settings > Auto update of date
and time).
Confirm automatic update of date and time
You can set your phone to ask for a confirmation before it automatically
updates the date and time. You can accept or decline the update.
Press Menu 4-4-2 (Settings > Phone settings > Auto update of date
and time).
Turn off automatic update of date and time
When you turn off the date and time update, the phone uses the date and
time that you have manually entered instead of getting the information
from the network.
Press Menu 4-4-3 (Settings > Phone settings > Auto update of date
and time).
To set the time manually, refer to “Set the clock” on page 64.
8265_1.BOOK Page 65 Friday, October 19, 2001 3:06 PM
[ 66 ]
12 • ADD A WELCOME NOTE
You can set your phone to display a welcome note
each time you switch on your phone. This note
could say, for example: Hello. It could include your
name, a reminder, or more. The maximum length of
this note is 36 characters.
1Press Menu 1-3 (Messages > Welcome note).
2Enter the text of the welcome note.
As you enter characters, they appear to the left of the cursor. Press Clear
to delete characters to the left of the cursor. Press to move
cursor to the right; press to move it to the left.
3Press Options.
4Scroll to Save and press OK.
To erase the welcome note, press Menu 1-3 (Options > Erase > OK).
• USE 1-TOUCH DIALING
You must store names and numbers in your phone book before you can use
1-touch dialing.
You can assign a name from the phone book to a 1-touch dial location,
using your phone’s keys 2 through 8. When you press the key, the associated
number is automatically dialed.
•Keys 1 and 9: The 1 key is used exclusively to dial your voice mailbox.
The 9 key is used exclusively to make calls to the emergency number
that is programmed into your phone.
•Key 2: You can use the 2 key to dial a customer care operator. Refer to
“Contact your service provider” on page 7. You can overwrite this
feature and assign a 1-touch dial location to the 2 key.
8265_1.BOOK Page 66 Friday, October 19, 2001 3:06 PM
[ 67 ]
Personalization 12
Assign a name or number to1-touch dial key
1Press Names and scroll to 1-touch dialing.
2Press Select.
3Scroll to the first number that includes the message (empty) and
press Assign.
4Scroll to the name and number to which you want to assign this key
and press Select.
Repeat these steps as many times as necessary.
5To call a number using 1-touch dialing, press and hold the appropriate
key for a few seconds.
The phone dials the number.
Change 1-touch dialing numbers
After you have assigned 1-touch dialing numbers to a key, you can change
key and number associations at any time.
1Press Names.
2Scroll to 1-touch dialing and press Select.
3Scroll to the key you want to change and press Options.
4Scroll to Change and press Select.
5Scroll to through phone book.
6When you reach the new number, press Select.
Erase 1-touch dialing numbers
You can erase 1-touch dialing key assignments at any time.
1Press Names.
2Scroll to 1-touch dialing and press Select.
3Scroll to the key you want to erase and press Options.
4Scroll to Erase and press Select.
8265_1.BOOK Page 67 Friday, October 19, 2001 3:06 PM
[ 68 ]
12 5Press OK.
• USE EMERGENCY KEY 9
When the emergency key feature is turned on, the phone attempts to make
an emergency call when you press 9 and OK. The phone dials the emergency
number preprogrammed into your phone.
Note: If you have activated the emergency key 9 feature, you can
also dial an emergency call by pressing and holding 9 until the
phone indicates it is attempting to make an emergency call. This
method does not work, however, when Keyguard is active.
Activate the emergency key 9
Before you can use the emergency key feature, you must first activate it.
1Press Menu 4-1-1 (Settings > Call settings > Emergency key 9).
2Scroll to On and press OK.
3If you ever want to deactivate this feature, press Menu 4-1-1 and
scroll to Off.
Warning: Official emergency numbers vary by location. Only one
emergency number is programmed into your phone, and this is the
number that is dialed when you press key 9. However, this might
not be the proper number in all circumstances.
Make an emergency call
Press 9 and . For more details, refer to “Emergency calls” on page 124.
• USE CALLER GROUPS
You can create groups of names in your phone book and give each group a
different ringing tone. This allows you to recognize who is calling you by the
way your phone rings.
To use the caller group feature, you must also have access to caller ID. Caller
ID is a network services feature (contact your service provider).
8265_1.BOOK Page 68 Friday, October 19, 2001 3:06 PM
[ 69 ]
Personalization 12
Add names to a caller group
Before you can create a caller group, you must include the names that will
make up a caller group in your phone book.
1At the Start screen, press until you see the name or number
you want to assign to a caller group.
2Press Details if shown; if not, press Options.
3Scroll to Caller groups and press Select.
4Scroll to the caller group to which you want to add this name and
press Select.
Assign a ringing tone to a caller group
After you have created a caller group, you can assign a specific ringing tone
to this group. When someone from that group calls you, you’ll be able to
identify a friend, a family member, or other caller from the ringing tone.
1At the Start screen, press Names.
2Scroll to Caller groups and press Select.
3Scroll to the group you want and press Select.
4Scroll to Group ringing tone, and press Select.
5Scroll to the tone that you want to assign and
press OK.
Tip: You can set your phone to ring only when people from certain
caller groups call you. Otherwise, the phone is silent.
Rename a caller group
1At the Start screen, press Names.
2Scroll to Caller groups and press Select.
3Scroll to the group you want and press Select.
4Scroll to Rename group and press Select.
5Enter the group name and press OK.
8265_1.BOOK Page 69 Friday, October 19, 2001 3:06 PM
[ 70 ]
12 Remove names from a caller group
1In the phone book, scroll to select the name you want to remove, and
press Options.
2Scroll to Caller groups and press Select.
3Scroll to No group and press Select.
The name is removed from the group.
Display caller group graphics
When someone calls you from a particular caller group, your phone can
display a picture to identify that person’s caller group.
1Press Names.
2Scroll to Caller groups and press Select.
3Scroll to the caller group for which you want to display a graphic and
press Select.
4Scroll to Group graphic and press Select.
5Scroll to On.
The graphic associated with that caller group is now set to appear.
Receive a downloaded graphic
If you have this service, your phone may receive a downloaded caller-group
graphic. The screen shows the message Group graphic received.
View the new graphic
Note: If you press Exit at any time before saving the graphic, the
new graphic will be deleted!
1 When your phone shows Group graphic received, press Options.
2Show is selected.
3Press OK.
The new group of graphics appears.
8265_1.BOOK Page 70 Friday, October 19, 2001 3:06 PM
[ 71 ]
Personalization 12
Save a received graphic
1After previewing the group graphic, press Back.
2Scroll to Save, then press OK.
3Choose the caller group graphic you want to replace (Family, Friends,
VIP, and so on).
4Press OK.
The phone saves the group graphic with the caller group you selected.
Discard a received graphic
To discard a group graphic:
Press Exit.
OR
Scroll to Discard and press OK.
8265_1.BOOK Page 71 Friday, October 19, 2001 3:06 PM
[ 72 ]
13 13 Security
Your phone is equipped with a versatile security system that prevents the
unauthorized use of the phone.
You must successfully enter your security code to activate and use certain
phone features.
•The default security code is 12345.
•Nokia highly recommends that you immediately change this code.
Then, write down and store the new code in a safe place, away from
your phone.
When entering your security code, a * appears on the screen each time you
press a number key. This prevents others from seeing your code.
If you incorrectly enter a security code five times in a row, your phone won’t
accept any entries for the next 5 minutes. However, if you realize that
you’ve entered the code incorrectly before pressing OK, you can use Clear
to erase the code, digit by digit, beginning with the last digit.
When this guide describes an action that requires the entry of your security
code, each step necessary to this action is provided.
• CHANGE YOUR SECURITY CODE
1Press Menu 4-3-2-4 (Settings > Security settings > Access codes
> Change security code).
2The Security code field appears.
3Enter the default security code and press OK.
4At the message Enter new security code, enter your new security
code and press OK.
5At the message Verify new security code, enter your new security
code again and press OK.
The message Security code changed appears.
8265_1.BOOK Page 72 Friday, October 19, 2001 3:06 PM
[ 73 ]
Security 13
If you have changed your security code and don’t remember the new code,
contact your service provider. When you change your security code, the
default setting is no longer valid.
• PROTECT YOUR PHONE WITH THE
LOCK CODE
You can prevent unauthorized use of your phone by locking it. When your
phone is locked, it is not possible to navigate the menu or the phone book.
Calls can be received, but can only be made to the unlocked phone number.
•The default lock code is 1234.
•Nokia recommends that you change this code immediately.
You can save an unlocked phone number and make calls to that number
without entering the lock code. For additional information, refer to “Store
an unlocked phone number” on page 74.
Note: If you enter an incorrect lock code five times in a row, your
phone prompts you for the security code.
Lock the phone
1Press Menu 4-3-2-1 (Settings > Security settings > Access codes
> Phone lock).
2Enter the lock code and press OK.
3Scroll to On and press OK.
Complete the phone lock activation by turning your phone off and back on.
Once you turn the phone back on, Phone locked appears on the Start
screen, and you are prompted to enter the lock code when you press Menu
or Names.
With phone lock activated, it may still be possible to make emergency calls,
such as 911 or any other official emergency numbers. This means it may be
possible to either enter the emergency number and press OK , or to press
and hold 9 if the emergency key 9 has been activated.
8265_1.BOOK Page 73 Friday, October 19, 2001 3:06 PM
[ 74 ]
13 Store an unlocked phone number
1Press Menu 4-3-2-2 (Settings > Security settings > Access codes
> Unlocked phone number).
2Enter the lock code and press OK.
3The Number box opens.
4Enter a phone number or press Search and scroll through the phone
book until the number you want to store appears.
5Press OK or Options.
6Scroll to Save and press OK.
Call the unlocked phone number
Press or once, then .
OR
Manually enter the phone number and press .
Answer a call with phone lock on
To answer a call while using a lock code, press any key except
and .
Change your lock code
1Press Menu 4-3-2-3 (Settings > Security
settings > Access codes > Change lock
code).
The Enter lock code box opens.
2Enter the lock code and press OK.
Only numeric characters are accepted.
3Enter the new lock code and press OK.
4Verify the new lock code, and press OK.
8265_1.BOOK Page 74 Friday, October 19, 2001 3:06 PM
[ 75 ]
Security 13
When you change your lock code, make sure you store it in a safe
place, away from your phone. Avoid entering access codes similar
to emergency numbers to prevent accidental emergency calls.
Turn off phone lock
1Press Menu.
The Enter lock code box opens.
2Enter the lock code and press OK.
Phone unlocked appears briefly, and you are returned to the Start screen.
3Press Menu 4-3-2-1 (Settings > Security settings > Access codes
> Phone lock).
The Enter lock code box opens again.
4Enter the lock code and press OK.
5Scroll to Off and press OK again.
Phone lock deactivated appears briefly.
• LOCK THE KEYPAD
When you lock the keypad, you prevent accidental key presses—for example,
when your phone is in a pocket or purse. This feature is called keyguard.
Activate keyguard
There are three different ways to activate the
keyguard:
At the Start screen:
•Press and hold .
•Press Menu .
•Press Menu 9 (Keyguard).
8265_1.BOOK Page 75 Friday, October 19, 2001 3:06 PM
[ 76 ]
13 When Keyguard is turned on, you might be able to make calls to the
emergency number that is programmed into your phone. For example,
dial 911 and press . However, when Keyguard is on, you cannot use
the emergency 9 key.
Note: Keyguard is automatically turned off when the phone is
connected to a car kit.
Deactivate keyguard
1Press Unlock.
2Press .
OR
1Press and hold until the message Unlock keys? appears.
2Press OK.
Answer a call while keyguard is active
During an incoming call, the keypad automatically unlocks.
Press to answer the call.
After you end the call, keyguard automatically becomes active again. Press
the Power key to quickly switch the lights on for 15 seconds.
• RESTRICT CALLS
You can restrict incoming and outgoing calls. To restrict outgoing calls, you
create a list of restrictions and apply the appropriate restriction.
Before you define restrictions for outgoing calls, only one restriction option
is available: Add restriction.
Add restriction enables you to create your own list of outgoing call
restrictions. The maximum number of call restrictions you can define is ten.
8265_1.BOOK Page 76 Friday, October 19, 2001 3:06 PM
[ 77 ]
Security 13
After you have used the Add restriction option to add at least one
restriction, the following options are then available:
•Select: Allows you to select call restrictions from the outgoing
calls list.
•Edit: Allows you to edit an existing outgoing call restriction.
•Erase: Erases any existing outgoing call restrictions.
When calls are restricted, you might be able to make calls to the emergency
number that is programmed into your phone. For example, you could dial
911 and press . However, emergency key 9 might not work, depending
on the type of restriction you choose.
Restrict outgoing calls
1Press Menu 4-3-1 (Settings > Security settings > Restrict calls).
2Press Select.
3Enter your security code and press OK.
4Scroll to Add restriction and press OK.
5Enter the number you want to restrict and press OK.
The Name field appears.
For example: If you want to restrict all calls that begin with 1, enter
1. This will restrict all outgoing long distance phone calls. If you want
to restrict all calls that begin with 972, enter 972.
•If you want to add a name for the call restriction, enter the name
using your phone’s keypad and press OK.
•If you don’t want to add a name, press OK.
8265_1.BOOK Page 77 Friday, October 19, 2001 3:06 PM
[ 78 ]
13 Restrict incoming calls
To restrict incoming calls:
1Press Menu 4-3-1 (Settings > Security settings > Restrict calls).
2Scroll to Restrict incoming calls and press Select.
3Enter your security code and press OK.
4Scroll to All calls and press Mark.
Press Unmark to remove incoming call restrictions.
5Press Back.
The Save changes? message appears.
6Press Yes.
Press No to exit without saving changes.
8265_1.BOOK Page 78 Friday, October 19, 2001 3:06 PM
[ 79 ]
Network services features 14
14 Network services features
The following network services can be obtained from your service provider.
These services are not available from all providers or in all areas.
•Voice privacy
•Call waiting
•Call forwarding
•Sending own number
When you subscribe to any of these services, your service provider gives you
a feature code that activates each service. Deactivation codes are used to
deactivate each service.
After you store the appropriate code in your phone, the code is sent to the
network to verify that you’re using the correct feature code. The voice privacy
feature does not require you to store a feature code before using it.
More than one number? If your phone has more than one phone number
assigned to it, any stored feature codes apply only to your primary phone
number.
After you store a feature code, the respective service appears as a menu
option on your phone’s screen. You can use these menus to activate and
deactivate the network services.
• SET UP HOW YOUR PHONE SELECTS A SYSTEM
Your phone is capable of working in residential, private, and public systems
(such as your home system). You can choose how your phone selects a
network to use. Your phone may not show the options described here. For
information, contact your service provider.
Set up the way your phone selects a network
Press Menu 5. The following three options appears on the screen:
8265_1.BOOK Page 79 Friday, October 19, 2001 3:06 PM
[ 80 ]
14 1Automatic: Your phone automatically searches for available networks
and chooses the appropriate one each time you turn on your phone
on.
2Manual: The phone searches for networks and displays a listing of all
of the possible networks on your phone’s screen. Next to each
network, one of the following appears: Available or Not available. If
a network is designated as Not available, you cannot use it.
3New Search: Your phone begins a new search for both private and
residential systems. When it finds the best system available, your
phone displays it on its screen. You can then select this system or start
another search by pressing Next.
Scroll through the options and press OK when your option is highlighted.
If you have two phone numbers, the Manual and New search features are
used only with your primary phone number.
Switch from a private system to a public system
1Press and hold Menu while you are not in a call.
Your phone displays the message Search public systems?
2Press OK and your phone uses the public system for the next (and only
the next) outgoing call.
After you complete this call, your phone returns to the Automatic
system selection.
Select a public system
When you take your phone outside its home system, the phone is said to be
"roaming." The phone can search for home-type systems—systems that are
the same type as your home system. Or, the phone can search for non-
home-type systems.
Note: The options described here may not be available for your
phone. Contact your service provider for information.
8265_1.BOOK Page 80 Friday, October 19, 2001 3:06 PM
[ 81 ]
Network services features 14
Your service provider maintains system roaming agreements and programs
a list of preferred systems into your phone. Your phone looks for these
systems when you’re roaming.
1Press Menu 4-5-7 to tell your phone how to choose a public system
(network). Your selection remains active until you change it.
•Any system: When service is not available in your home system,
the phone searches for a home-type system. Then it searches for a
non-home-type system until your phone finds a usable system.
•Home-type: When service is not available in your home system,
the phone searches for a home-type system first. However, if a
non-home-type system is found, then your phone will use this
system.
•Non-home type: The phone searches only for a non-home-type
system.
•Home only: The phone uses only its home system. It will not roam.
2Scroll to the option you want and press OK.
• ROAMING
The term roaming indicates that your phone is not in its home area. Calls
made or received while you are roaming are usually more expensive.
In some systems, your phone may not be recognized by the host system. You
may not be able to place a call.
ROAMING INDICATORS
When your phone begins roaming, the phone beeps once and may display
the word ROAM on your phone’s screen. If your phone is not roaming, it
either displays the word HOME or the name of your service provider.
Contact your service provider for more specific information on how roaming
works with your phone and for information about coverage limitations.
8265_1.BOOK Page 81 Friday, October 19, 2001 3:06 PM
[ 82 ]
15 15 Text messages
With the text message network service, you can send and receive short text
messages. You can also send and receive messages that contain a person’s
name and number called a "business card".
To get your messages, other phones must have text message capability.
Or, you can ask the service provider to convert the message to other
formats, such as e-mail.
The maximum length of a text message is 160 characters. Your phone
has space for up to 80 text messages, depending on the length of each
message.
Note: The maximum length of a text message differs, depending
on the capabilities of the network from which it originated. Also,
text messages may appear different at different times because
messages can originate in networks other than your own.
Contact your service provider for more information about the availability of
text messages.
• ABOUT WRITING MESSAGES
You can write a message in one of two ways: 1) use standard text input or
2) use predictive text input.
Write with standard text input
Standard text input is the default mode for text entry. When you use
standard text input, the icon appears in the upper left corner of your
phone’s screen.
1Find the key that is below the letter you want to enter.
2Press the key until your letter appears on the screen.
8265_1.BOOK Page 82 Friday, October 19, 2001 3:06 PM
[ 83 ]
Text messages 15
For example, to enter the name John:
Write with predictive text input
With predictive text input, press each number key only once for each letter.
For example, to write Nokia with the English dictionary selected:
Since the word shown on the screen changes after each key stroke,
disregard the word until you have keyed in all the characters.
Turn on predictive text input
1Press Menu, then Select.
2When Text messages appears, press OK.
3Scroll to Write message and press OK‘
4Enter a character using the keypad.
5Press Options, scroll to Dictionary and press OK.
6Scroll to the dictionary you want (for example, English).
7Press OK.
Press J
Press O
Press H
Press N
Press N
Press O
Press K
Press I
Press A
8265_1.BOOK Page 83 Friday, October 19, 2001 3:06 PM
[ 84 ]
15 T9 dictionary activated appears. "T9" is the technical name for
predictive text input. This means you can use predictive text input to
enter messages.
The T9 icon is also visible in the text message window when
the feature is activated.
Keys and tools for predictive text input
Key Purpose
- Use for word entry. Press each key only once for each
letter.
Press to view the next matching word if the underlined
word is not correct. To change the underlined word,
press repeatedly until the word you want appears.
To insert a special character or punctuation, press and
hold .
Spell If the dictionary doesn’t recognize a word, you will see
Spell above the left selection key. Press Spell, type the
word and press OK.
Press once to accept a word and add a space.
Press once quickly to switch the character case.
indicates uppercase. indicates lowercase.
Press and hold to enter a number. indicates 123
mode. Press and hold again to write text letters.
Clear Press once to delete the character to the left of the cursor.
Press and hold to delete all text.
Press once to add a period.
Maximum number of characters available. The character
counter appears in the top right corner of the display
and counts down for each character added.
160
8265_1.BOOK Page 84 Friday, October 19, 2001 3:06 PM
[ 85 ]
Text messages 15
Turn off predictive text input
1Repeat steps 1 through 7 in “Turn on predictive text input” on
page83.
2Scroll to Dictionary off and press OK.
Or, press to toggle between predictive and standard text input.
Press until the icon in the upper left corner indicates the desired
input type.
Notes about predictive text input
To insert a symbol, press and hold . The symbol screen appears,
showing the following characters:
. , @ ? ! : ; - + # * ( ) ‘ “ _ & $ % / < > =
•Scroll to the desired symbol and press Insert.
•When the entry is complete, the word inserted will be underlined.
IF THE WORD IS CORRECT
•Press to confirm the change and enter a space.
•Start writing the next word.
IF THE WORD IS NOT CORRECT
Press repeatedly until the desired word appears, then press to
confirm it, OR
•Press Options, scroll to Matches, then press OK. Scroll to the correct
word and press Use.
•Start writing the next word.
ADD A DESIRED WORD TO THE MATCH LIST
If the ? character appears after a word, the word you intended to write is
not in the dictionary. You can add the word to the dictionary.
1Press until Spell appears in place of Options.
2Press Spell and enter the word(s) using standard text input.
3Press OK to save the word(s).
8265_1.BOOK Page 85 Friday, October 19, 2001 3:06 PM
[ 86 ]
15 INSERT NUMBERS
1To add a number to the message, press and hold until
appears. You can also press Options and scroll to Insert number.
2Enter the desired numbers, then press and hold to return to
ABC mode.
INSERT SYMBOLS
1To put a symbol in the message, press and hold until the symbol
screen appears (or press Options and scroll to Insert symbol).
2Select the desired symbol (use the scroll keys to move the selection)
and press Insert.
WRITE COMPOUND WORDS
1Write the first part of the word and press to accept it.
Then press Clear once to remove the space.
2Write the last part of the compound word and press to enter
the word in memory.
• WRITE AND SEND A TEXT MESSAGE
1Press Menu 1-1-3 (Messages > Text messages > Write message).
The message screen appears.
2Enter a message of up to 160 characters.
To learn how to enter text quickly. Refer to “Write with predictive text
input” on page 83.
3When you’ve finished writing, press Options, scroll to Send, then
press OK.
4Enter or recall from your phone book the recipient’s 10-digit phone
number, then press Send.
Sending message appears.
When the message is successfully sent, Message sent appears.
8265_1.BOOK Page 86 Friday, October 19, 2001 3:06 PM
[ 87 ]
Text messages 15
If you need to exit while writing the message, press at any time.
Later, press Menu 1-1-3 to return and finish writing the message. If
you turn off the phone without saving the message, the message will
be lost.
Save a message in the saved folder
When writing a text message, it’s a good idea to save it in the saved folder.
Then if there is a message delivery problem, you can easily resend the
message.
1While writing the message, press Options.
2Scroll to Save, then press OK.
Resend a message from the outbox
Messages in the outbox show one of two icons.
The icon shows that an attempt to send the message to the text
message center has been made.
OR
The icon shows that no attempt has been made to send the message.
1Scroll to the message, then press Read.
2Press Options.
3Scroll to Forward, select As a message, and press OK.
4With Send highlighted, press OK.
5Enter or find the number where you want to send the message, then
press Send.
• RECEIVE A TEXT MESSAGE
When you receive a text message, the phone sounds a message alert tone
and the text message icon appears, along with one of the following
messages:
8265_1.BOOK Page 87 Friday, October 19, 2001 3:06 PM
[ 88 ]
15 •Message received: Indicates that you have an unread message or
page. If you have more than one message or page, the appropriate
number is listed before this message.
When you receive the above message along with another message
Call, followed by a name or number, the message is a page. Only the
names of people who are stored in your phone book appear.
•New emergency message: Means that an emergency message or page
was sent by someone via the service provider. Emergency messages
are sent only in situations where life or property are in immediate
danger. Emergency messages are listed first and override all other
messages.
•Urgent: Means the message has a high priority.
Read a text message
1Press Read.
This takes you to the Inbox, with the new message selected.
2Press Read again to read the message.
3Press Options for a list of choices you have while reading the message
(see the table following this section).
4Press OK when the option you want is highlighted.
In your inbox, text messages are shown in the order in which they
were received, unless one is an emergency message. An emergency
message overrides any order and appears first.
8265_1.BOOK Page 88 Friday, October 19, 2001 3:06 PM
[ 89 ]
Text messages 15
Choose options for a text message
When you press Options while reading a message, the following choices are
available:
• WHEN YOUR PHONE’S MEMORY IS FULL
When your phone’s message memory is full, one or more messages of the
lowest priority are automatically deleted. These messages are usually
deleted from your phone’s outbox. An incoming emergency message could
force a deletion from your phone’s Saved folder.
If the memory is still full after deleting messages, the message No space:
message waiting: appears. Clear the notification by pressing OK.
Option What it does
Read next Takes you to the next message.
Erase Erases the current message.
Save Saves this message to the Saved folder.
Call back Calls the person who sent you the text message, if
their phone number is included in the message.
You can also press the start key while the message
is displayed to dial the number.
If more than one number is on the screen, the
numbers appear in a list. Scroll to the phone number
you want to call and press the start‘ key.
Forward Forwards the message to another person. That
person must have the appropriate message service.
Reply Provides a screen where you can write a reply.
8265_1.BOOK Page 89 Friday, October 19, 2001 3:06 PM
[ 90 ]
15 • ERASE A MESSAGE
1While reading a message, press Options.
2Scroll to Erase, then press OK.
Your phone asks you to confirm that you want to erase the message.
3Press OK.
• REPLY TO A MESSAGE
1While reading a message, press Options.
2Scroll to Reply, then press OK and choose whether your message will
be sent as a text message or as e-mail.
3Enter your message, then press Options.
4Scroll to Send, then press OK.
The phone displays the return number.
5Edit the number, or press Send.
• FORWARD A MESSAGE
1While reading a message, press Options.
2Scroll to Forward, then press OK and choose whether your message
will be sent as a text message or as e-mail.
3Press Options, or edit the message and press Options.
4Scroll to Send, then press OK.
5Enter or find the recipient’s phone number, then press Send.
8265_1.BOOK Page 90 Friday, October 19, 2001 3:06 PM
[ 91 ]
E-mail messages 16
16 E-mail messages
You can use your phone to send and receive e-mail messages. This means
you no longer need to be at your computer to send or receive messages.
Note: Email messages may not be available in all wireless systems.
Contact your service provider for details and availability.
• SAVE E-MAIL ADDRESSES
You can add an e-mail address to a name you’ve already saved in the phone
book. Or, you can add a name and address as a new entry.
Save an e-mail address for an existing name
1At the Start screen, press Names; at Search, press Select.
The Name box opens.
2Enter the first two letters of the name you want to find and press OK.
3Press Options (or press Details if the Name list view is selected in
your phone book), scroll to E-mail address, and press Select.
The E-mail address box opens.
4Enter the address.
Press once to insert a dot. Press 6 times to insert the @
sign.
5After the address is entered, press OK.
The message Saved appears briefly, confirming your action.
Add a new e-mail address
1At the Start screen, press Names, scroll to Add new, and press Select.
The Name box opens.
2Enter the name and press OK.
The Number box opens.
8265_1.BOOK Page 91 Friday, October 19, 2001 3:06 PM
[ 92 ]
16 3Enter the phone number and press OK.
The message Saved appears briefly, confirming your action.
Press Details, then Options, scroll to E-mail address, and press Select.
The E-mail address box opens.
4Enter the address.
Press once to insert a dot (.). Press 6 times to insert the
@ sign.
5Press OK.
The message Saved appears briefly, confirming your action.
Edit an e-mail address
1To find the name for the e-mail address you want to edit, follow steps
1 through 3 in “Save an e-mail address for an existing name” on page
91.
2Enter any changes, using the scroll keys to move the insertion point
backward and forward in the address.
3When the address is the way you want it, press OK.
The message Saved appears briefly, confirming your action.
• SEND AN E-MAIL MESSAGE
1Press Menu 1-1-5 (Messages > Text messages > Write e-mail).
The E-mail address box opens. If your phone asks for an e-mail
gateway number, contact your service provider.
2Enter the e-mail address, or press Search.
•e-mail address. Press OK when you've finished.
The Subject box opens.
•Search. The phone lists only those names in your phone book that
are saved with corresponding e-mail addresses. Scroll through the
names and press OK.
8265_1.BOOK Page 92 Friday, October 19, 2001 3:06 PM
[ 93 ]
E-mail messages 16
3Enter a subject and press OK.
The subject line can hold a maximum of 26 characters. The subject line
is not required.
4When the message screen appears, enter your message.
Note: The maximum number of characters for message length
varies; contact your service provider for details.
To turn on predictive text input, refer to “Write with predictive text input”
on page 83.
After you complete the message, press Options, select Send, and press OK.
A status message tells you the mail is being sent.
Options for a completed e-mail message
d Visible only when dictionary activated
Option What it does
Send Sends the message.
Save Saves the message in the Saved folder.
Clear text Erases the message.
Exit Returns to the previous screen.
Dictionary Activates or deactivates the dictionary (predictive
text input).
Spell modedAdds a new word to the dictionary.
Insert numberdInserts a number in the message.
Insert symboldInserts a special character in the message.
MatchesdChecks spelling options in the dictionary.
8265_1.BOOK Page 93 Friday, October 19, 2001 3:06 PM
[ 94 ]
16 • RECEIVE AN E-MAIL MESSAGE
When you receive an e-mail message, the phone sounds a message alert
tone and the text message icon appears, along with one of the
following messages:
•Message received: Indicates that you have an unread e-mail message,
text message or page. If you have more than one new e-mail message,
text message or page, the appropriate number is listed before this
message. For additional information on text messages and pages, refer
to “Receive a text message” on page 87.
•New emergency message: Means that an emergency message or page
was sent by someone by the service provider. Emergency messages are
sent only in situations where life or property are in immediate danger.
Emergency messages are listed first and override all other messages.
•Urgent: Means the message has a high priority.
Read an e-mail message
1When you receive an e-mail message, press Read.
The Inbox appears with the new e-mail message selected.
OR
From the Start screen, press Menu 1-1-1 (Message > Text messages >
Inbox). Select the e-mail message and press Read.
2Press Read again to read the e-mail message.
3Press Options for the following options available while reading
the e-mail message.
4Scroll to the option you want, then press OK.
In your inbox, e-mail messages are shown in the order in which they
were received, unless one is an emergency message. An emergency
message overrides any order and appears first.
8265_1.BOOK Page 94 Friday, October 19, 2001 3:06 PM
[ 95 ]
E-mail messages 16
Option What it does
Read next Takes you to the next e-mail message.
Erase Erases the current e-mail message.
Save Saves this e-mail message to the Saved folder.
Call back Calls the person who sent you the e-mail message,
if their phone number is included in the message.
You can also press the start key while the message
is displayed to dial the number.
If more than one number is on the screen, the
numbers appear in a list. Scroll to the phone number
you want to call and press the start key.
Forward Forwards the e-mail message to another person.
That person must have the appropriate message
service.
Reply Provides a screen where you can write a reply.
8265_1.BOOK Page 95 Friday, October 19, 2001 3:06 PM
[ 96 ]
16 • REPLY TO OR FORWARD AN E-MAIL MESSAGE
1If the message is not on the screen, press Menu 1-1-1 (Message >
Text messages > Inbox).
2Scroll to the message you received and press Read.
3Press Options, scroll to Forward or Reply, and press OK.
4Scroll to As e-mail and press Select.
If your phone asks for an e-mail gateway number, contact your service
provider.
If forwarding an e-mail message, go on to step 5. If replying to an
e-mail message, skip to step 6.
5Enter the recipient's e-mail address or press Search to find the name
if it has been saved in your phone book.
•If you press Search, enter the first few letters of the name you
want and press OK when you find the name. The address appears
in the Recipient address box. Press OK.
•The phone lists all the names from your phone book. If you select
a name for which there is no email address, your phone displays the
message, No e-mail address for this name.
•If you enter the e-mail address, press OK when you've finished.
6Enter a subject and press OK.
You can leave the line blank if you wish.
7When the message box opens, write your reply or any message you
want to add when you forward the mail.
To turn on predictive text input, refer to “Write with predictive text
input” on page 83.
8When you finish your message, press Options, scroll to Send, and
press OK.
8265_1.BOOK Page 96 Friday, October 19, 2001 3:06 PM
[ 97 ]
Personal assistant 17
17 Personal assistant
Your phone can be your personal assistant. It can wake you up in the
morning and remind you of meetings, birthdays, and tasks. You can check
the current time, calculate a tip at dinner, and convert currencies.
With a calendar, clock, alarm clock, and phone book, you have everything
you need to keep track of your life.
• USE THE CALENDAR
The calendar keeps track of birthdays, meetings,
reminders, and calls you need to make. It can even
sound an alarm when it’s time for you to make a
call or go to a meeting.
View the calendar
1Press Menu 8 (Calendar).
If the date is not set, the phone prompts you to do so.
If the date has been set, go to step 3.
2Set the date using the mm/dd/yyyy format.
For example: Type 05042001for 04 May 2001. The numbers entered
overwrite existing numbers.
3Press OK.
The current day and date appear.
Move from day to day
After you set the date, whenever you press Menu 8, your phone displays the
current date and day.
1Use the scroll key to move forward or backward through the calendar.
2When the desired date appears, press Options and scroll to highlight
the option.
8265_1.BOOK Page 97 Friday, October 19, 2001 3:06 PM
[ 98 ]
17 Create a calendar note
This option enables you to create a note and associate it with one of the
following categories: Reminder, Call, Meeting, or Birthday. You can also
set an alarm for any calendar note.
1Scroll to the desired day and press Options.
2Scroll to Make note and press Select.
The list of categories appears.
3Scroll to the desired category and press OK.
REMINDER
The Subject field appears.
1Enter the information and press OK. The current date appears.
•If you want to change the date for this reminder, do so and
press OK.
•If you do not want to change the date, just press OK. The message
Set alarm for the note? appears.
2Press Yes or No.
•If you don’t want to set an alarm, press No. The message Calendar
note saved appears.
•If you press Yes, the Alarm date field appears.
3Enter the date on which you want the alarm to sound and press OK.
The Alarm time field appears.
4Enter the time at which you want the alarm to sound using the
hh:mm format and press OK.
5Select either am or pm and press OK.
The message Calendar note saved appears.
Note: Step 5 appears only if you have selected the am/pm format.
8265_1.BOOK Page 98 Friday, October 19, 2001 3:06 PM
[ 99 ]
Personal assistant 17
CALL
The Number field appears.
1Either enter the number and press OK, or press Search and scroll
through your phone book until you find the number you want.
Press OK.
The Date field appears.
2Enter the date on which you need to make this call and press OK.
The Time field appears.
3Enter the time that you need to make this call using the hh:mm
format and press OK.
4Select am or pm and press OK.
The message Set alarm for the note? appears.
Note: Step 4 appears only if you have selected the am/pm format.
5Press Yes or No.
•If you don’t want to set an alarm, press No.
•The message Calendar note saved appears.
•If you press Yes, the Alarm date field appears.
6Enter the date on which you want the alarm to sound and press OK.
The Alarm time field appears.
7Enter the time at which you want the alarm to sound using the
hh:mm format and press OK.
8Select am or pm and press OK.
The message Calendar note saved appears.
Note: Step 8 appears only if you selected the am/pm format.
8265_1.BOOK Page 99 Friday, October 19, 2001 3:06 PM
[ 100 ]
17 MEETING
The Subject field appears.
1Enter the information and press OK.
The current date appears.
•If you do not want to change the date, press OK.
The Time field appears.
•If you want to change the date for this reminder, do so and
press OK.
2Enter the time of the meeting using the hh:mm format and press OK.
Select am or pm and press OK.
The message Set alarm for the note? appears.
Note: Step 2 appears only if you selected the am/pm format.
3Press Yes or No.
•If you don’t want to set an alarm, press No.
The message Calendar note saved appears.
•If you press Yes, the Alarm date field appears.
4Enter the date on which you want the alarm to sound and press OK.
The Alarm time field appears.
5Enter the time at which you want the alarm to sound using the
hh:mm format and press OK.
6Select either am or pm and press OK.
The message Calendar note saved appears.
Note: Step 6 appears only if you selected the am/pm format.
8265_1.BOOK Page 100 Friday, October 19, 2001 3:06 PM
[ 101 ]
Personal assistant 17
BIRTHDAY
The Name field appears.
1Enter the person’s name whose birthday you want to be reminded of
and press OK.
The Date field appears.
2Enter the month and day of this person’s birthday and press OK.
The Year of birth field appears.
3Enter the year using the yyyy format and press OK.
The message Set alarm for the note? appears.
4Press Yes or No.
•If you don’t want to set an alarm, press No.
The message Calendar note saved appears.
•If you press Yes, the Alarm date field appears.
5Enter the date on which you want the alarm to sound and press OK.
The Alarm time field appears.
6Enter the time at which you want the alarm to sound using the
hh:mm format and press OK.
7Select either am or pm and press OK.
The message Calendar note saved appears.
Note: Step 7 appears only if you selected the am/pm format.
View the day’s notes
You can review notes you’ve written for certain days. To review notes for a
certain day:
1Open the calendar and scroll to the day you want.
2Press Options, scroll to View Day and press Select.
3Press Options.
8265_1.BOOK Page 101 Friday, October 19, 2001 3:06 PM
[ 102 ]
17 The following options are available:
Erase notes
This option enables you to erase notes. You can choose from the following
categories: Of chosen day, One by one, or All at once.
•After you choose a category, press Erase to delete the associated
notes, or press Back.
•If you choose All at Once, your phone deletes every note that is saved
in the calendar. When you’re asked to confirm, press Yes or No.
Option What it does
Erase Clears a note from your calendar. An Erase note?
message appears to confirm your choice. Press OK.
Edit Displays the note in the Subject/Name field, when
you’re writing. Make the changes you want and press
OK.
The date appears. Press OK again.
The Set alarm for the note? message appears. Press
Yes or No. The message Calendar note saved
appears.
Move Enables you to move the note to another date. When
you press this option, the Date field appears.
Enter the date to which you want to move this note
and press OK. The message Calendar note saved
appears.
Send note Sends the note to another person’s phone.
8265_1.BOOK Page 102 Friday, October 19, 2001 3:06 PM
[ 103 ]
Personal assistant 17
When a calendar alarm goes off
When an alarm goes off, you have two choices: you can either 1) press OK
or 2) press Postpone.
•If you press OK, the alarm is silenced.
•If you press Postpone, the following message appears: Alarm postponed
for 10 min.
After 10 minutes, the alarm once again goes off. The alarm can be
postponed in increments of 10 minutes for up to 90 minutes.
You can either:
•Press Postpone again
OR
•Press OK to stop the alarm.
Send or receive calendar notes
When someone sends you a calendar note, your phone displays Calendar
note received. You can save the note in your calendar and work with it in
the same way as any other note in your calendar, including setting an alarm.
SEND A CALENDAR NOTE
You can send a note to another phone user if the person has a phone that
can receive calendar notes.
1Create a new note, or scroll to the day where a note is stored.
2Press Options, scroll to Send note and press OK.
3In the Number box, enter the number to send the note.
If the number is in your phone book, enter the name and press Search
to find the number.
4Press Send.
The phone sends your message.
RECEIVE A CALENDAR NOTE
Caution: If you press Exit, the calendar note will be deleted!
8265_1.BOOK Page 103 Friday, October 19, 2001 3:06 PM
[ 104 ]
17 1When your phone shows Calendar note received, press Options.
Show is selected.
2Press OK and scroll through the note to read it.
SAVE A RECEIVED CALENDAR NOTE
1After viewing the calendar note, press Back.
2Scroll to Save, then press OK.
DISCARD VIEWED CALENDAR NOTES
After viewing the calendar note:
1Press Back.
2Scroll to Discard and press OK.
• SEND AND RECEIVE BUSINESS CARDS
Your phone can send or receive electronic business cards consisting of a
name and phone number. You can save received business cards in your
phone book.
Send a business card
1Find the name in your phone book.
2Press Options and scroll to Send bus. card.
3Press Select.
4Enter or recall the phone number to which you want to send the
business card, and press Send.
View a received business card
When you receive a business card, the phone displays Business card
received.
Note: If you press Exit at any time before saving the business card,
the business card will be deleted!
8265_1.BOOK Page 104 Friday, October 19, 2001 3:06 PM
[ 105 ]
Personal assistant 17
1When your phone displays Business card received, press Options.
2Show is selected. Press OK.
3Scroll through the available information.
Save a viewed business card
1After viewing the business card, press Back, scroll to Save, then
press OK.
2At the Name: prompt, edit the name if you want to, then press OK.
3At the Number: prompt, edit the number if you want to, then press
OK.
Delete a viewed business card
After viewing the business card, press Back, then press Exit. To discard,
press Discard, then press OK.
• DOWNLOAD RINGING TONES
You can download up to five ringing tones to replace the Personal entries in
your list of ringing tones. For details about this network service, contact
your wireless service provider.
Notification of received ringing tone
If you have this service and your phone receives a downloaded ringing tone,
it notifies you with an alert tone and displays Ringing tone received.
Listen to received ringing tones
Note: If you press Exit at any time before saving the ringing tone,
the ringing tone will be deleted!
1When your phone shows Ringing tone received, press Options.
Playback is selected.
2Press OK.
The phone plays the ringing tone.
8265_1.BOOK Page 105 Friday, October 19, 2001 3:06 PM
[ 106 ]
17 Save received ringing tones
1After listening to the ringing tone, press Quit.
2Scroll to Save tone, then press OK.
3Choose which ringing tone you want to replace — either an empty
Personal placeholder (if any are remaining), or a previously
downloaded tone.
4Press OK.
The phone saves the new tone in the list of ringing tones.
Discard received ringing tones
To discard a ringing tone without saving:
Press Exit.
OR
Scroll to Discard tone and press OK.
• ALARM CLOCK
The alarm clock operates off your phone’s clock.
You can set the alarm clock to ring at any time,
even if your phone is turned off. The alarm clock’s
volume is determined by the current ringing
volume and tone settings.
If you have selected the Silent or Beep once ringing tone, then your alarm
clock quietly beeps once. Your phone will also vibrate if you’ve activated this
feature in the current profile.
To set the time, refer to “Set and display the clock” on page 63.
8265_1.BOOK Page 106 Friday, October 19, 2001 3:06 PM
[ 107 ]
Personal assistant 17
Set the alarm clock
1Press Menu 4-2-2 (Settings > Phone settings > Alarm clock).
The Set alarm time message appears.
2Enter the time for which you want to set the alarm using the hh:mm
format and press OK.
Any existing numbers are replaced with the newly entered numbers.
3Select either am or pm and press OK.
The Alarm on message appears.
Note: Step 3 appears only if you have selected the am/pm format.
8265_1.BOOK Page 107 Friday, October 19, 2001 3:06 PM
[ 108 ]
17 Turn off the alarm clock when it rings
When the alarm clock rings:
•Press Stop to turn it off. The phone asks if you want to keep the phone
on. Press Yes or No.
•Press Snooze to set the alarm to go off again in 10 minutes.
If you let the alarm ring for 1 minute or more without pressing a key,
it stops ringing, waits 10 minutes and rings again. This continues until
you press Stop.
Deactivate the alarm clock
To turn the alarm off setting:
1Press Menu 4-2-2 (Settings > Phone settings > Alarm clock).
2Scroll to Off and press OK.
If you have selected the Silent or Meeting profile, your alarm beeps
only once. The best profile to use when using the alarm clock is
Normal or Outdoor, unless these profiles have been modified from
their original settings.
Warning: Do not switch on the phone where wireless phone use
is prohibited or where it might cause interference or danger.
• CALCULATOR
Your phone’s calculator adds, subtracts, multiplies,
divides, and converts currencies.
Use the calculator
1Press Menu 7 (Calculator).
2Enter the first number in the calculation.
If you need to enter a number with a decimal point, press to
indicate it.
8265_1.BOOK Page 108 Friday, October 19, 2001 3:06 PM
[ 109 ]
Personal assistant 17
3Based upon the type of calculation, use the following:
Or, you can press Options, scroll to Equals, Add, Subtract, Multiply,
Divide, To home, To visited, or Exchange rate. Then press OK.
4Enter the second number in the calculation and press Options.
5Scroll to Equals and press OK.
Press Clear to erase any mistakes.
Note: Repeat steps 4 and 5 as many times as necessary.
Convert currency
You can use the calculator to first set the exchange rate and calculate the
exchange rate.
SET THE EXCHANGE RATE
1Press Menu 7 (Calculator), then press Options.
2Scroll to Exchange rate and press OK.
Select the exchange rate: How many home units to a visited unit, or
How many visited units to a home unit.
3Press OK.
The exchange rate box opens with the number 1.
4Enter the appropriate number and press OK.
If you want to... Press...
add ∗ (for + symbol)
subtract ∗∗ twice (for - symbol)
multiply ∗∗∗ (for * symbol)
divide ∗∗∗∗ (for / symbol)
8265_1.BOOK Page 109 Friday, October 19, 2001 3:06 PM
[ 110 ]
17 The number 1 is overwritten by the number you entered. To enter a
decimal point, press .
5Press OK.
The Rate saved message appears.
CALCULATE CURRENCY USING THE EXCHANGE RATE
1Press Menu 7 (Calculator).
2Enter number of units comprising the exchange rate.
3Press Options and scroll to To home or To visited.
To home converts visited units of currency to home units using the
exchange rate.
To visited converts home units of currency to visited units using the
exchange rate.
4Press OK.
8265_1.BOOK Page 110 Friday, October 19, 2001 3:06 PM
[ 111 ]
Fun and games 18
18 Fun and games
Not only can you use your phone for communication but also for some
serious fun. Your phone offers three games: Space Impact, Pairs 2, and
Snake 2.
Warning: Do not switch on the phone when wireless phone use is
prohibited or when it may cause interference or danger. Even when
you’re playing a game, the phone is active.
Start a new game
1Scroll to the Games menu, and press Select.
2Highlight Select game, and press Select.
3Scroll to the desired game, and press Select.
4Select New game, and press Select.
Use the option Instructions to learn how to play the game. With the option
Level you can choose the difficulty level of the game.
Please visit Nokia games services on the Internet for more hints and tips:
http://www.nokia.com
• SPACE IMPACT
Use your weapons to survive alien attacks. When you defeat all the enemies,
you progress to the next level. Use and to move up and
down, and to move left and right. Key or fires the
main weapons, and key or fires bonus weapons.
• PAIRS 2
Uncover pictures to find pairs, but use as few tries as possible. In Arcade
mode, you must find all the pairs before the bomb explodes. Move the
cursor with keys , , , and . Press to reveal the
pictures. To advance to the next level, you must match all the pairs before
the dynamite fuse runs out.
8265_1.BOOK Page 111 Friday, October 19, 2001 3:06 PM
[ 112 ]
18 • SNAKE 2
Feed the snake with as many goodies as possible and watch it grow.
Use keys , , , and to turn the snake toward the
food. The longer the snake’s tail grows, the higher your score. You can
choose to have a clear field, or select from five different mazes. If the snake
runs into its own tail or the surrounding wall, the game is over.
8265_1.BOOK Page 112 Friday, October 19, 2001 3:06 PM
[ 113 ]
Wireless Internet 19
19 Wireless Internet
Your phone has a built-in browser you can use
to connect to selected services on the Internet. You
can view weather reports, check news or flight
times, view financial information, and
much more.
You can also save the address of any Internet site
as a bookmark, much the same way you bookmark a Web page on your
personal computer.
Important: To use the browser, you may need to subscribe to
additional services, if available. Also, your service provider may need
to configure your phone for browsing after you’ve subscribed.
Contact your service provider for more information.
• NOTES ON WIRELESS INTERNET ACCESS
This section gives a brief overview of wireless Internet access and provides
some notes that may be useful in understanding wireless access.
Technology background
A technology called Wireless Application Protocol (WAP) is to mobile
devices what the World Wide Web (www) is to desktop computers. The
mobile community began developing WAP several years ago to provide
access to the Internet for mobile users.
Today, most WAP sites consist of text and hyperlinks, and some sites can
accept text input. Some pages even contain low-resolution graphics. Your
service provider and others are free to design WAP sites as they choose, so
the sites are as variable as Web pages on the Internet.
8265_1.BOOK Page 113 Friday, October 19, 2001 3:06 PM
[ 114 ]
19 Important: Internet content received over a secure connection and
stored in your browser’s cache may be reused over nonsecure
connections and may create security issues. Nokia recommends that
you check with your service provider to determine if emptying your
browser’s cache after each browsing session or some other method
should be used to avoid security issues.
The service provider’s role
Because wireless Internet content is designed to be viewed from your
phone, your wireless service provider now becomes your “wireless Internet
service provider“ as well.
It’s likely that your service provider has created a home page and set up your
browser to go to this page when you connect to the Internet. On your
service provider’s home page, you’ll find links to a number of other sites that
offer wireless access.
• SET UP FOR BROWSING
Your service provider usually modifies the appropriate settings when you
subscribe to the feature. You should not need to do anything to set up your
phone for browsing. Contact your service provider if you have problems
using the browser.
• SIGN ON TO THE INTERNET
To connect to the Internet.
1At the Start screen, press Menu 10 (Menu > Services).
2At the Services menu, press Select.
3Select Home.
Your phone connects to the Internet and to your service provider’s
home page.
•The message Connecting to service appears on the screen until
the connection is complete.
8265_1.BOOK Page 114 Friday, October 19, 2001 3:06 PM
[ 115 ]
Wireless Internet 19
•If you see the message Check homepage address, the phone may
not be set up for browsing. Contact your service provider to make
sure that your phone is configured properly.
• USE BROWSER OPTIONS (SERVICES MENU)
The Services menu gives you the options shown in the following list.
Some service providers may have customized the options on the Services
menu. Contact your service provider for more information if any of the
options shown here are not available.
• SIGN OFF THE INTERNET
Press at any time (or press Exit).
• NAVIGATE THE WIRELESS INTERNET
The following pictures show most of the elements you may find on a
wireless Internet site. These are examples only.
Option What it does
Clear cache Empties the browser’s temporary memory and frees
up space. It’s advisable to empty your cache at the
end of each session.
Home Starts the browser and takes you to your service
provider’s home page.
Settings Provides options for changing connection settings,
appearance settings, and security certificate.
8265_1.BOOK Page 115 Friday, October 19, 2001 3:06 PM
[ 116 ]
19
Edit a data entry field
To enter information, perform the steps below:
1Scroll to highlight the data entry field.
2Use the phone’s keypad to enter the text in the data entry field
(for example, Miami), and press Options and select OK.
The text you entered now appears between the brackets in the field.
3Scroll to the link you want (for example, Get forecast?) and press
Options and select Open link.
Header line: The current Internet site.
Active hyperlink: Highlighted option ready
to be chosen.
Inactive hyperlink: Scroll to select a link and
press OK to switch to other pages on the
current site or to other sites.
Scroll through the list of links ( and
).
Selection list: Brackets [ ] mean you can press
the link to show additional choices or links.
Options/Back: Press Options to go to the
site’s menu and/or the browser menu.
Press Back to return to the previous page.
Data entry field: Brackets [ ] around three
dots appear when you need to enter
information. For example, you might enter a
city name, an airline name or flight number, or
a stock symbol.
8265_1.BOOK Page 116 Friday, October 19, 2001 3:06 PM
[ 117 ]
Wireless Internet 19
Choose browser options (while connected)
While you’re connected to the Internet, the phone’s browser provides the
options described in the following list.
Tip: Developers of wireless Internet sites may add options to the
browser menu that are specific to their Web sites. These options are
often links to other areas within the site. As in any other menu, scroll
to the link you want and press Select.
• USE BOOKMARKS
You can save addresses for your favorite sites as bookmarks. A bookmark
helps you find a site again, just as a slip of paper in a book helps you find a
page.
•If a wireless Internet site has a title, it will appear in the bookmark list
(for example, Yahoo! News, ebay on WAP, Mapquest).
Option What it does
Home Takes you back to the service provider’s home page.
Bookmarks Shows a list of all saved bookmarks.
Edit or Select Allows you to edit the currently selected browser
element (for example, a checklist or text entry field),
or selects the active (highlighted) hyperlink.
Go to address Accepts an address you enter.
Use Number Captures a phone number shown on the screen to
add to the phone book or place a call.
Clear cache Empties the browser’s temporary memory.
Exit Exits the current session and returns to the Start
screen.
8265_1.BOOK Page 117 Friday, October 19, 2001 3:06 PM
[ 118 ]
19 •If the site has no title, the site’s address will appear in the list of
bookmarks (for example, http://www.yahoo.com/news.wml).
SAVE AN ADDRESS AS A BOOKMARK
1Navigate to the site you want to bookmark and press Options.
2Scroll to Add Bookmark and press Select.
ENTER A BOOKMARK MANUALLY
1At the Services menu, press Select.
2Scroll to Bookmarks and press Select.
3Press Options.
4Highlight New bookmark and press Select.
5Enter the site’s address (example: my.yahoo.com) and press OK.
You don’t need to enter the http:// characters. They are added
automatically.
6Enter a name for the new bookmark and press OK.
RETURN TO A BOOKMARKED SITE
1At the Services menu, press Options.
2Scroll to Bookmarks and press Select.
3Scroll to the bookmark you want and press OK.
If you are not currently browsing, the phone will connect to the
Internet.
8265_1.BOOK Page 118 Friday, October 19, 2001 3:06 PM
[ 119 ]
Reference information 20
20 Reference information
• BATTERIES AND CHARGERS
This section provides information about the phone’s batteries, accessories,
and chargers. Be aware that the information in this section is subject to
change as the batteries, chargers, and accessories change.
This phone is intended for use when supplied with power from an ACP-7U,
an ACP-8U, LCH-8, or an LCH-9. Other usage could invalidate any approval
given to this apparatus and might be dangerous.
Warning! When you purchase batteries, chargers, and accessories
for your phone, use only batteries, chargers, and accessories that
have received approval from the phone’s manufacturer. The use of
any other type of phone-related hardware will invalidate any approval or
warranty applying to the phone, and could also be dangerous. For
availability of approved batteries, chargers, and accessories, check with
your dealer.
•When the battery is fully charged, the indicator will tell you that the
battery is fully charged.
•When you are not using a charger, disconnect it from the power source.
Do not leave the battery connected to a charger for more than a week,
since overcharging could shorten its lifespan. If left unused, a fully
charged battery will discharge itself over time.
Temperature extremes can affect the ability of your battery to charge.
Therefore, allow it to cool down or warm up before trying to charge it.
When the battery is running out of power and your phone only has a few
minutes of talk time remaining, a warning tone sounds and the battery low
message appears briefly. When no more talk time is left, a warning tone is
sounded and the phone switches itself off.
8265_1.BOOK Page 119 Friday, October 19, 2001 3:06 PM
[ 120 ]
20 Do not short-circuit the battery. Accidental short-circuiting can occur when
a metallic object, like a coin, a clip, or a pen causes a direct connection of
the + and - terminals of the battery, which are metal strips on the edge of
the battery.
An example of short-circuiting could occur if you carry a spare battery in
your pocket or purse, where the battery could come into contact with such
objects like a coin. Short-circuiting could damage either the battery or the
connecting object.
Leaving the battery in hot or cold places, such as in a closed car in either
summer or winter conditions, will reduce the capacity and lifetime of
the battery. Always try to keep the battery between 15° C and 25° C
(59° F and 77° F).
A phone with a hot or cold battery might not work temporarily, even if the
battery is fully charged. The performance of Li-Ion batteries is particularly
limited in temperatures below 0° C (32° F).
The following list provides a guideline that you can follow:
•When the operating time (talk time and standby time) is noticeably
shorter than normal, buy a new battery.
•Use the battery only for its intended purpose.
•Never use any charger or battery that is damaged or worn out.
•Batteries must be recycled or disposed of properly. Do not dispose of
batteries by putting them in the fire!
•When you disconnect the power cord of any accessory, grasp and pull
the plug, not the cord.
• IMPORTANT SAFETY INFORMATION
This section provides additional safety information. A brief overview of
safety can be found in “Safety first” on page 1.
8265_1.BOOK Page 120 Friday, October 19, 2001 3:06 PM
[ 121 ]
Reference information 20
Traffic safety
Do not use a wireless phone while driving a vehicle. Always park the vehicle
before using the phone. Always secure the phone into its holder; do not
place the phone on the passenger seat or where it can break loose in a
collision or during a sudden stop.
Remember: Safety—Your most important call. Road safety always comes
first.
Operating environment
Remember to follow any special regulations that are in force in any area,
and always switch off your phone wherever it is forbidden to use it.
Otherwise, the use of your phone could cause interference or danger.
When connecting the phone or any accessory to another device, read the
associated user guide first and obtain detailed safety instructions.
Note: Do not connect incompatible products.
As with other mobile radio transmitting equipment, you are advised that,
for the satisfactory operation of the equipment and for the safety of
personnel, it is recommended that the phone should only be used in the
normal operating position. This position is when the phone is held to your
ear with the antenna pointing over your shoulder.
Electronic devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, certain electronic equipment might not be shielded
against the RF signals from your wireless phone. The following four
subsections provide more information about this topic.
PACEMAKERS
Pacemaker manufacturers recommend that a minimum separation of six
inches (20 cm.) should be maintained between a handheld wireless phone
and a pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with
pacemakers:
8265_1.BOOK Page 121 Friday, October 19, 2001 3:06 PM
[ 122 ]
20 •should always keep the phone more than six inches (20 cm) from their
pacemaker when the phone is switched on
•should not carry the phone in a breast pocket
•should use the ear opposite the pacemaker to minimize the potential
for interference
Note: If you have any reason to suspect that interference is taking
place, switch off your p hone immediately.
HEARING AIDS
Some digital wireless phones could interfere with some hearing aids. In the
event of such interference, you might want to consult your service provider.
OTHER MEDICAL DEVICES
Operation of any radio transmitting equipment, including cellular phones,
could interfere with the functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of the medical device to
determine if they are adequately shielded from external RF energy. Also
contact these authorities if you have any questions.
Switch off your phone in health care facilities or where any posted
regulations instruct you to do so. Hospitals or health care facilities could be
using equipment that is sensitive to external RF energy.
VEHICLES
RF signals could improperly affect installed or inadequately shielded
electronic systems in motor vehicles. These could include electronic fuel
injection systems, electronic anti-skid (anti-lock) braking systems, electronic
speed control systems, or air bag systems.
Check with the manufacturer or its representative regarding your vehicle.
You should also consult the manufacturer of any equipment that has been
added to your vehicle.
POSTED FACILITIES
Switch your phone off in any facility where posted notices so require.
8265_1.BOOK Page 122 Friday, October 19, 2001 3:06 PM
[ 123 ]
Reference information 20
Potentially explosive atmospheres
Switch off your phone if you are in any area that has a potentially explosive
atmosphere, and obey all signs and instructions. Sparks in such areas could
cause an explosion or fire, resulting in bodily injury or even death.
You are advised to switch off the phone while at a refueling point (service
station). And, you are reminded of the need to observe restrictions regarding
the use of radio equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often—but not always—
clearly marked. These areas include the following: below deck on boats;
chemical transfer or storage facilities; vehicles using liquefied petroleum
gas (such as propane or butane); areas where the air contains chemicals or
particles, such as grain, dust or metal powders; and any other area where
you would normally be advised to turn off your vehicle engine.
Vehicles
Only qualified personnel should service the phone or install the phone in a
vehicle. Faulty installation or service could be dangerous and might
invalidate any warranty that could apply to the unit.
Regularly check that all wireless phone equipment in your vehicle is
mounted and operating properly.
Do not store or carry flammable liquids, gases or explosive materials in the
same compartment as the phone, its parts, or accessories.
For vehicles equipped with an air bag, remember that an air bag inflates
with great force. Do not place objects, including both the installed or the
portable wireless equipment, in the area over the air bag or in the air bag
deployment area. If the in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
Switch off your phone before boarding an aircraft. The use of wireless
telephones in an aircraft may be dangerous to the operation of the aircraft,
disrupt the wireless telephone network and may be illegal.
8265_1.BOOK Page 123 Friday, October 19, 2001 3:06 PM
[ 124 ]
20 Failure to observe these instructions could lead to the suspension or the
denial of telephone services to the offender, or it could result in legal action,
or both scenarios could apply.
• EMERGENCY CALLS
IMPORTANT!
This phone, like any wireless phone, operates using radio signals,
wireless and landline networks, and user-programmed functions.
Because of this, connections in all conditions cannot be guaranteed.
Therefore, you should never rely solely on any wireless phone for
essential communications (for example, medical emergencies).
Remember, to make or receive any calls, the phone must be switched on and
be used in a service area that has adequate signal strength. Emergency calls
might not be possible on all wireless phone networks or when certain
network services and/or phone features are in use. Check with local service
providers.
Always ensure that your phone is properly charged before attempting any
emergency calls. If you allow your battery to become empty, you will be
unable to receive or make calls, including emergency calls. You must then
wait a few minutes after the charging begins to place any emergency calls.
Make an emergency call
1If the phone is not on, switch it on.
2Enter the emergency number for your present location (for example,
911 or any other official emergency number—emergency numbers
vary by location).
3Press .
You can also use the emergency key . Refer to “Use emergency
key 9” on page 68.
8265_1.BOOK Page 124 Friday, October 19, 2001 3:06 PM
[ 125 ]
Reference information 20
If certain features are in use (Keyguard, fixed dialing, restrict calls, and so
on), you might first need to turn those features off before you can make an
emergency call. Consult this guide and your local cellular service provider.
When making an emergency call, remember to give all of the necessary
information as accurately as possible. Remember that your wireless phone
might be the only means of communication at the scene of an accident—do
not terminate the call until given permission to do so.
• CERTIFICATION INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of
the U.S. Government. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using
standard operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power
level, the actual SAR level of the phone while operating can be well below
the maximum value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna,
the lower the power output.
8265_1.BOOK Page 125 Friday, October 19, 2001 3:06 PM
[ 126 ]
20 Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by
the government-adopted requirement for safe exposure. The tests are
performed in positions and locations (for example, at the ear and worn on
the body) as required by the FCC for each model. The highest SAR value
for this model phone as reported to the FCC when tested for use at the
ear is ______ W/kg and when worn on the body, as described in this user
guide, is _______ W/kg. (Body-worn measurements differ among phone
models, depending upon available accessories and FCC requirements).
While there may be differences between the SAR levels of various phones
and at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model phone with
all reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model phone is on file
with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID ______________.
For body worn operation, to maintain compliance with FCC RF exposure
guidelines, use only Nokia-approved accessories. When carrying the
phone while it is on, use the specific Nokia belt-clip that has been tested
for compliance.
Use of non-Nokia-approved accessories may violate FCC RF exposure
guidelines and should be avoided.
*In the United States and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kilogram (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements. SAR values may vary depending on national reporting
requirements and the network band. For SAR information in other regions
please look under product information at http://www.nokia.com.
8265_1.BOOK Page 126 Friday, October 19, 2001 3:06 PM
[ 127 ]
Reference information 20Care and maintenance
Your phone is a product of superior design and craftsmanship and should
be treated with care. The suggestions below will help you to fulfill any
warranty obligations and allow you to enjoy this product for many years.
When using your wireless phone, battery, charger, or any accessory:
•Keep the phone and all its parts and accessories out of the reach of
small children.
•Keep the phone dry. Precipitation, humidity, and all types of liquids
contain minerals that will corrode electronic circuits.
•Do not use or store the phone in dusty, dirty areas as its moving parts
can be damaged.
•Do not store the phone in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries, and warp or melt
certain plastics.
•Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the electronic circuit boards.
•Do not attempt to open the phone. Non-expert handling may cause
damage.
•Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
•Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean the phone.
•Do not paint the phone. Paint can clog the moving parts and prevent
proper operation.
•Use only the supplied or approved replacement antenna.
Unauthorized antennas, modifications, or attachments could damage
the phone and may violate regulations governing radio devices.
•If the phone, battery, charger, or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
8265_1.BOOK Page 127 Friday, October 19, 2001 3:06 PM
[ 128 ]
20 • ACCESSORIES
If you want to enhance your phone’s functionality, a range of accessories is
available for you. You can select any of these items to help accommodate
your specific communication needs. For availability of these and other
accessories, contact your service provider.
A FEW PRACTICAL RULES FOR ACCESSORY OPERATION
•Keep all accessories out of reach of small children.
•When you disconnect the power cord of any accessory, grasp and pull
the plug, not the cord.
•Check regularly that any vehicle-installed accessories are mounted
and are operating properly.
•Installation of any complex car accessories must be made by qualified
personnel only.
•Use only batteries, chargers, and accessories that have been approved
by the phone manufacturer. The use of any other types could
invalidate any approval or warranty applying to the phone could be
dangerous.
8265_1.BOOK Page 128 Friday, October 19, 2001 3:06 PM
[ 129 ]
Reference information 20
• BATTERY
This section provides information about the phone’s battery. Be aware that
the information in this section is subject to change.
Note: This is a lithium ion (Li-Ion) battery. Dispose of used
batteries in accordance with any local regulations.
The tables shown in this section provide information about battery
options that are available for your phone, charging times with the Rapid
Travel Charger (ACP-8U), the Standard Travel Charger (ACP-7U), talk times,
and standby times. Consult your service provider for more information.
Note: The charging times listed in the next section are
approximate.
CHARGING TIMES
The times displayed above allow your battery to obtain approximately 80%
of its capacity. When this happens, the battery scroll bars on your phone’s
screen stop scrolling.
If you want to obtain 100% battery capacity, allow another 2 hours for a
“trickle” or “maintenance” charge.
STANDBY AND TALK TIMES
The above times are approximate. Battery operation times vary according to
signal conditions, network parameters that are set by the service provider,
and how you use your phone.
Battery Option ACP-7U Charger ACP-8U Charger
BLB-3 Li-Ion 1000 mAh 3 hrs 40 min 2 hrs 30 min
Battery Option Digital Talk
Time Analog Talk
Time Standby Time
BLB-3 Li-Ion
1000 mAh 120 min to
200 min 60 min to
112 min 96 to 200 hrs (dig)
37 to 60 hrs (ana)
8265_1.BOOK Page 129 Friday, October 19, 2001 3:06 PM
[ 130 ]
20 • CHARGERS AND OTHER ACCESSORIES
This section provides information about the phone’s chargers and
accessories. Be aware that the information in this section is subject to
change as the chargers and accessories change.
The chargers and accessories that are described in this section are available
for your phone. Contact your dealer for details. Also, refer to the accessories
brochure that was included in your sales package for the entire line of Nokia
Original Accessories.
Standard Travel Charger (ACP-7U)
This is a lightweight (187g) and durable AC charger.
To use the Standard Travel Charger, plug it into a
wall outlet and connect the lead from the charger
to the base of your phone.
Rapid Travel Charger (ACP-8U)
This is a lightweight (110g) and durable AC charger.
Calls can be made during charging, even with a fully
discharged battery.
To use the Rapid Travel Charger (ACP-8U), plug it into
a standard 120V or 220V AC wall outlet, and connect
the lead from the charger to the base of your phone.
Approximate charging times for discharged batteries
are shown in “Charging times” on page 129.
8265_1.BOOK Page 130 Friday, October 19, 2001 3:06 PM
[ 131 ]
Reference information 20
Rapid Mobile Charger (LCH-8/LCH-9)
You can charge your phone’s battery from
your vehicle battery by using the Rapid
Mobile Charger (LCH-8/LCH-9).
Calls are possible during charging. A green
light indicates that the charger is ready for
charging. The battery charging times are the
same as those for the Rapid Travel Charger (ACP-8U).
The input voltage range is from 10.8 Vdc to 32 Vdc, negative grounding.
Avoid prolonged charging with the Rapid Mobile Charger (LCH-8/LCH-9)
when the car engine is not running; this could cause your car battery to
drain. Note also, that in some cars, the cigarette lighter plug is not provided
with electricity if the ignition is not switched on.
Nokia Xpress-on™ color covers
Your phone’s Xpress-on™ cover is available in several fashion colors. Extra
covers may be purchased from your authorized Nokia dealer.
Note: Always store the phone with cover attached.
REMOVE THE BACK COVER
1Switch off the power and disconnect the
phone from the charger or any other device.
2Push in the release button on the back of the
phone (1), slide the cover toward the top of
the phone (2 and 3), and remove it.
UPDATE SECTION FOR GIOVANNI
8265_1.BOOK Page 131 Friday, October 19, 2001 3:06 PM
[ 132 ]
20
REMOVE THE FRONT COVER
1Use the finger rests on each side of
the phone and hold the phone face
down.
2While holding the phone, place your
finger on the grove between the
phone and the cover.
3Gently pry the front cover away
from the phone and lift the phone out
of the cover.
REMOVE THE KEYPAD
1Lift the keypad from the inside of the front cover.
2Place the keypad into the new front cover.
REPLACE THE FRONT COVER
1Slide the top of the phone into the top of the front cover. Be careful
to align the power key with its place in the top of the front cover.
2Gently push the bottom of the phone into the bottom of the front
cover until it snaps into place.
REPLACE THE BACK COVER
1Insert the two catches of the back cover in the
corresponding slots in the phone.
2Slide the cover towards the bottom of the
phone until it locks into place.
UPDATE PAGE FOR GIOVANNI
8265_1.BOOK Page 132 Friday, October 19, 2001 3:06 PM
[ 133 ]
Frequently asked questions (FAQ) 21
21 Frequently asked questions
(FAQ)
This section lists and answers the questions phone users most frequently
ask.
Some of the answers tell you to use menu shortcuts. For a complete listing
of these shortcuts, refer to “Shortcuts” on page 23.
Q. How do I lock my phone?
A. Press Menu 4-3-2-1 (Menu > Settings > Security settings > access
codes), enter your lock code, scroll to On, and press OK.
Q. How do I unlock my phone?
A. Press Menu 4-3-2-1 (Menu > Settings > Security settings > access
codes), enter your lock code, scroll to Off, and press OK.
Q. What is my lock code?
A. The lock code enables you to lock your phone, thus preventing
someone else from using it. The default lock code is 1234. However,
it is suggested that you change this code immediately.
Q. What is my security code?
A. The default security code is 12345. However, it is suggested that you
change this code immediately. Certain features can be used only after
the correct security code has been successfully entered.
Q. How do I lock the keypad?
A. There are three ways you can lock the keypad: 1) press and hold ,
2) press Menu , or 3) from the Start screen, press Menu 9
(Menu > Keyguard). The term Keyguard is also used in connection
with this feature.
8265_1.BOOK Page 133 Friday, October 19, 2001 3:06 PM
[ 134 ]
21 Q. How do I unlock the keypad?
A. There are two ways you can unlock the keypad: press and hold
and press OK, or press Unlock and . The term Keyguard is also
used in connection with this feature.
Q. How do I make the ringing louder?
A. Press Menu 3-1-2-2 (Menu > Profiles > Normal >
Customize > Ringing volume), then choose a volume level.
Q. How do I change the ringing tone?
A. Press Menu 3 (Menu > Profiles) and scroll through the list of profiles
until you find the one for which you want to set the ringing tone, then
press Options.
•Highlight Customize and press OK.
•Scroll to Ringing tones, then press Select.
•Scroll through the options. After you hear the tone you want to
use, press OK.
Q. How do I store my voice mailbox number?
A. Press Menu 1-2-2, enter your voice mailbox phone number, and press
OK. The screen tells you that the number is saved. Then the following
message appears: Save hidden voice mailbox password? Press Yes to
save this number.
This voice mailbox number is valid unless your phone number changes.
If your phone number changes, you will have to save a new voice
mailbox number.
Q. How do I call my voice mailbox number (retrieve voice messages)?
A. When your phone alerts you to new voice messages, press Listen and
follow the instructions on the phone. If you’d rather listen to your
messages later, press Exit.
8265_1.BOOK Page 134 Friday, October 19, 2001 3:06 PM
[ 135 ]
Frequently asked questions (FAQ) 21
To listen to your voice messages at a later time, perform one of the
following actions:
1Press and hold the 1 key.
2Press Menu 1-2-1 (Messages > Voice messages > Listen to voice
messages). The message Calling voice mailbox appears on the screen.
Follow the prompts to access your messages.
Q. How do I find my phone’s model number?
A. A type label is located under the phone’s battery and contains model
number. Turn your phone off, then remove the battery from the back
of the phone.
Q. How do I redial the last-dialed number.
A. Press twice, quickly.
Q. How do I assign a key to 1-touch dialing?
A. Press Names and scroll to 1-touch dialing.
Press Select.
Scroll to the first number that includes the message (empty) and press
Assign.
Scroll to the name or number to be assigned this key and press Select.
Repeat these steps as many times as necessary.
Q. How do I find out how many memory locations the phone has?
A. Press Names and scroll to Options.
Press Select.
Scroll to Memory status and press Select again. A message appears
that says Phone: xx free, xx in use where xx indicates the amount of
memory locations.
8265_1.BOOK Page 135 Friday, October 19, 2001 3:06 PM
[ 136 ]
21 Q. How do I find my phone’s ESN (electronic serial number)?
A. Turn your phone off. Remove the phone’s back cover, grasp the ridge
at the end of the battery and lift the battery out. On the inside of the
phone, on the sticker that was beneath the battery, after the letters
ESN, your phone’s ESN appears.
Q. How can I change the contrast of my phone’s display?
A. The contrast of your phone’s display is fixed and cannot be changed.
Q. How do I clear my call timers?
A. WARNING: The clearing of call timers cannot be undone.
Press Menu 2-5-5 and when the Security code field appears, enter
your security code and press OK.
8265_1.BOOK Page 136 Friday, October 19, 2001 3:06 PM
[ 137 ]
Glossary 22
22 Glossary
This section lists various terms and provides definitions.
antenna The transmitting device that sends or receives radio
signals to and from your phone.
battery The power source for the phone.
call forwarding A network services feature you use to forward
incoming calls to another number.
call waiting A network services feature that enables your phone
to beep while you are in the middle of a call. The
beep lets you know that someone else is calling you.
caller ID A network services feature that identifies incoming
calls.
digital/analog
selection A network services feature that enables you to
switch your phone between digital and analog
modes. This feature is available only for certain
phones.
electronic serial
number (ESN) The identification number that is assigned to the
phone.
home system The system in which your phone works without
having to roam.
icons Small pictures that appear on your phone’s screen
and are representative of something.
For example, the icon indicates that you can
enter alphabetic text into a specific field.
keypad tones See tones.
8265_1.BOOK Page 137 Friday, October 19, 2001 3:06 PM
[ 138 ]
22 message alert
tone See tones.
microphone The place on your phone into which you speak.
mobile-
originated short
message service
(MO-SMS)
A short messaging service that allows you to send
text messages from your phone, as well as receive
them.
network services Special services to which your wireless service
provider can give you access. Services include:
•Call forwarding
•Call waiting
•Caller ID
•Digital/analog selection
•Public system selection
•Send own number
•Selecting a phone number
•Voice mail
•Voice privacy
public system
selection A network services feature you can use to switch from
the default public system (home system) your phone
uses to either a private or a residential system.
ringing tone See tones.
ringing volume The volume level at which your phone rings. You can
set the phone to ring softer or louder.
roaming Occurs when you take your phone to an area that is
outside of your home system.
8265_1.BOOK Page 138 Friday, October 19, 2001 3:06 PM
[ 139 ]
Glossary 22
scrolling Moving through a list that is displayed on your phone,
such as a menu list or a listing of phone numbers.
sending own
number A network services feature that enables you to
determine, on a per-call basis, whether you want
your telephone number to display on another
phone’s caller ID.
selecting a
phone number A network services feature that enables you to switch
between phone numbers if you have more than one.
start screen The window on your phone on which information is
displayed—phone numbers, text messages, icons,
menu options, and more.
system A wireless network in which your phone works. There
are three types of systems: residential, private, and
public.
The public system is also known as a home system,
and it is in this system that your phone works. If you
take your phone outside of this system, roaming
occurs.
tones Sounds that the phone uses to indicate the sound:
•When you press a key—keypad tone
•When you receive a text message—message
alert tone
•When you receive a call—ringing tone
•When a warning condition occurs (such as when
a battery runs low) or when you’re playing a
game—warning and game tones
You can choose the way the tone sounds. For example,
you can choose a short ring, an ascending ring, or a
beep.
8265_1.BOOK Page 139 Friday, October 19, 2001 3:06 PM
[ 140 ]
22 voice channel A channel on which a voice conversation occurs and
on which brief digital messages may be sent from a
base station to a mobile station or from a mobile
station to a base station.
voice mail A network services feature that enables people who
call and miss you to leave a voice message on your
phone. You can then retrieve these messages from
your voice mailbox.
voice mailbox The area of the phone that collects and saves the
voice messages left by those who call and miss you.
voice privacy A network services feature that encrypts the voice
channel so that people cannot eavesdrop on your
phone conversations.
volume The volume level you set for the earpiece. This
controls how loud the sound is in the earpiece.
You can adjust the volume (while in a call or at any
time) by pressing the volume keys on the upper left
side of the phone.
warning and
game tones See tones.
8265_1.BOOK Page 140 Friday, October 19, 2001 3:06 PM
[ 141 ]
Technical information 23
23 Technical information
Feature Specification
Weight 3.8 oz with standard battery
(BLB-3 1000 mAh Li-Ion)
Size 88 cc
Frequency Range Lowband 824.04 - 848.97 MHz (TX)
869.04 - 893.97 MHz (RX)
Highband1850.04 - 1909.92 MHz (TX)
1930.08 - 1989.96 MHz (RX)
Transmitter Output Power Up to 600mW
Battery Voltage 3.6 V nominal
Operating Temperature -4°F to + 104°F
(-20°C to + 40°C)
Number of Channels 832 lowband
1997 highband
Phone numbers 3
Memory Locations 200
Memory Capacity Alpha: 26 digits per location
Numeric: 32 digits per location
8265_1.BOOK Page 141 Friday, October 19, 2001 3:06 PM
[ 142 ]
23 • TROUBLESHOOTING
The table below lists some of the most commonly-encountered problems
and provides possible solutions.
Problem Possible cause Possible solution
My phone isn’t
charging. The charger and the
phone are not properly
connected.
Securely connect the
charger to the phone.
The charger is not
properly plugged in. Ensure that the charger
is plugged in correctly.
My phone isn’t making
or answering calls. The battery is not
charged. Charge the battery.
The signal strength is
poor. If you are indoors, move
toward a window.
I can’t listen to my voice
messages. You don’t have voice
mail service. Call your wireless
service provider.
You have not set up
your voice mailbox with
your service provider.
Call your wireless
service provider.
You have not saved your
voice mail number in
your phone.
Refer to “Set up your
voice mailbox” on page
37.
The voice mail number
you have saved is
incorrect.
Call your wireless
service provider.
You have forgotten your
password or are entering
it incorrectly.
Call your wireless
service provider.
8265_1.BOOK Page 142 Friday, October 19, 2001 3:06 PM
[ 143 ]
NOKIA One-Year Limited Warranty 24
24 NOKIA One-Year Limited
Warranty
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free
from defects in material and workmanship that result in Product failure
during normal usage, according to the following terms and conditions:
1The limited warranty for the Product extends for ONE (1) year
beginning on the date of the purchase of the Product.
2The limited warranty extends to the original purchaser of the Product
(“Consumer”) and is not assignable or transferable to any subsequent
purchaser/end-user.
3The limited warranty extends only to Consumers who purchase the
Product in the United States.
4During the limited warranty period, Nokia will repair, or replace, at
Nokia's option, any defective parts, or any parts that will not properly
operate for their intended use with new or factory rebuilt
replacement items if such repair or replacement is needed because of
product malfunction or failure during normal usage. No charge will
be made to the Consumer for any such parts. Nokia will also pay for
the labor charges incurred by Nokia in repairing or replacing the
defective parts. The limited warranty does not cover defects in
appearance, cosmetic, decorative or structural items, including
framing, and any non-operative parts. Nokia's limit of liability under
the limited warranty shall be the actual cash value of the Product at
the time the Consumer returns the Product for repair, determined by
the price paid by the Consumer for the Product less a reasonable
amount for usage. Nokia shall not be liable for any other losses or
damages. These remedies are the Consumer’s exclusive remedies for
breach of warranty.
5Upon request from Nokia, the Consumer must prove the date of the
original purchase of the Product by a dated bill of sale or dated
itemized receipt.
8265_1.BOOK Page 143 Friday, October 19, 2001 3:06 PM
[ 144 ]
24 6The Consumer shall bear the cost of shipping the Product to Nokia in
Melbourne, Florida. Nokia shall bear the cost of shipping the Product
back to the Consumer after the completion of service under this
limited warranty.
7The Consumer shall have no coverage or benefits under this limited
warranty if any of the following conditions are applicable:
a) The Product has been subject to abnormal use, abnormal conditions,
improper storage, exposure to moisture or dampness, unauthorized
modifications, unauthorized connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper installation, or other
acts which are not the fault of Nokia, including damage caused by
shipping.
b) The Product has been damaged from external causes such as
collision with an object, or from fire, flooding, sand, dirt, windstorm,
lightning, earthquake or damage from exposure to weather conditions,
an Act of God, or battery leakage, theft, blown fuse, or improper use
of any electrical source, or damage caused by the connection to other
products not recommended for interconnection by Nokia.
c) Nokia was not advised by the Consumer in writing of the alleged
defect or malfunction of the Product within fourteen (14) days after
the expiration of the applicable limited warranty period.
d) The Product serial number plate or the accessory data code has
been removed, defaced or altered.
e) The defect or damage was caused by the defective function of the
cellular system or by inadequate signal reception by the external
antenna.
8If a problem develops during the limited warranty period, the
Consumer shall take the following step-by-step procedure:
a) The Consumer shall return the Product to the place of purchase for
repair or replacement processing.
8265_1.BOOK Page 144 Friday, October 19, 2001 3:06 PM
[ 145 ]
NOKIA One-Year Limited Warranty 24
b) If “a” is not convenient because of distance (more than 50 miles)
or for other good cause, the Consumer shall ship the Product prepaid
and insured to:
Nokia Inc.
Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL. 32901
c) The Consumer shall include a return address, daytime phone
number and/or fax number, complete description of the problem,
proof of purchase and service agreement (if applicable). Expenses
related to removing the Product from an installation are not covered
under this limited warranty.
d) The Consumer will be billed for any parts or labor charges not
covered by this limited warranty. The Consumer will be responsible for
any expenses related to reinstallation of the Product.
e) Nokia will repair or authorize the repair of the Product under the
limited warranty within 30 days after receipt of the Product by Nokia
or an Nokia authorized service center. If Nokia cannot perform repair
covered under this limited warranty within 30 days, or after a reasonable
number of attempts to repair the same defect, Nokia at its option, will
provide a replacement Product or refund the purchase price of the
Product less a reasonable amount for usage.
f) If the Product is returned to Nokia during the limited warranty
period, but the problem with the Product is not covered under the
terms and conditions of this limited warranty, the Consumer will be
notified and given an estimate of the charges the Consumer must pay
to have the Product repaired, with all shipping charges billed to the
Consumer. If the estimate is refused, the Product will be returned
freight collect. If the Product is returned to Nokia after the expiration
of the limited warranty period, Nokia's normal service policies shall
apply and the Consumer will be responsible for all shipping charges.
9The Product consists of newly assembled equipment that may contain
used components that have been reprocessed to allow machine
8265_1.BOOK Page 145 Friday, October 19, 2001 3:06 PM
[ 146 ]
24 compliance with Product performance and reliability specifications.
10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION
OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE
FOREGOING LIMITED WARRANTY IS THE CONSUMER'S SOLE AND
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT
LIMITED TO, LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF
SAVINGS OR REVENUE, PUNITIVE DAMAGES, LOSS OF USE OF THE
PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST
OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE
CLAIMS OF ANY THIRD PARTIES, INCLUDING CONSUMERS, AND
INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM BREACH OF THE WARRANTY,
BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER
LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE
LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR
DELAY IN RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR
LOSS OF USE DURING THE PERIOD THAT THE PRODUCT IS BEING
REPAIRED.
11 Some states do not allow limitation of how long an implied warranty
lasts, so the above one-year warranty limitation may not apply to you
(the Consumer). Some states do not allow the exclusion or limitation
of incidental and consequential damages, so certain of the above
limitations or exclusions may not apply to you (the Consumer). This
limited warranty gives the Consumer specific legal rights and the
Consumer may also have other rights which vary from state to state.
12 Nokia neither assumes nor authorizes any authorized service center
or any other person or entity to assume for it any other obligation or
liability beyond that which is expressly provided for in this limited
warranty including the provider or seller of any extended warranty or
service agreement.
8265_1.BOOK Page 146 Friday, October 19, 2001 3:06 PM
[ 147 ]
NOKIA One-Year Limited Warranty 24
13 This is the entire warranty between Nokia and the Consumer, and
supersedes all prior and contemporaneous agreements or
understandings, oral or written, and all communications relating to
the Product, and no representation, promise or condition not
contained herein shall modify these terms.
14 This limited warranty allocates the risk of failure of the Product
between the Consumer and Nokia. The allocation is recognized by
the Consumer and is reflected in the purchase price of the Product.
15 Any action or lawsuit for breach of warranty must be commenced
within eighteen (18) months following delivery of the Product.
16 Questions concerning this limited warranty may be directed to:
Nokia Customer Care Center
7725 Woodland Center Blvd., Ste. 150
Tampa, FL33614
Telephone: 1-888-NOKIA-2U (1-888-665-4228)
Facsimile: 1-813-249-9619
For the hearing-impaired only (TTY):
1-800-24-NOKIA (1-800-246-6542)
17 The limited warranty period for Nokia supplied attachments and
accessories is specifically defined within their own warranty cards
and packaging.
8265_1.BOOK Page 147 Friday, October 19, 2001 3:06 PM
[ 148 ]
24
8265_1.BOOK Page 148 Friday, October 19, 2001 3:06 PM
[ 149 ]
Numerics
1-touch dialing 66
A
ABC text entry mode 28
accessibility
alternate formats 9
features 8
mobile inductive loopset 8
solutions 8
TTY contact 9
website 8
accessories 128
accessories, operating 128
adding names and numbers 33
alarm
snoozing a calendar alarm 103
alarm clock 106
setting 107
turn off altogether 108
turning off or snoozing 108
alternate formats
audiocassette 9
e-text 9
large print 9
requesting 9
answering calls automatically 61
antenna
contact with 13
location 13
automatic answer 61
automatic update of date and time
confirm first 65
turn off 65
turn on 65
B
battery 129
chargers 130
charging 10
installing 10
standby and talk times 129
bookmarks
entering manually 118
returning to 118
saving 118
using 117
braille user guides 9
browser
options 115
set up 114
business cards 104
C
calculator 108
calendar 97
creating a note 98
erasing notes 102
turning off alarms 103
viewing 97
calendar notes
receiving 103
sending 103
calendar notes, viewing 101
call forwarding 47
activating 48
store the feature code 47
call lists, clearing 41
call log
checking 39
call timer
clearing 43
8265_1.BOOK Page 149 Friday, October 19, 2001 3:06 PM
[ 150 ]
turning on 42
call timers, checking 42
call waiting 45
activating 45
storing the feature code 45
using 46
caller groups
adding names 69
assigning ringing tone 69
display graphics 70
rename 69
caller groups with caller ID 68
caller ID 20
Send own number or block 52
calling cards 49
choosing 51
using 51
calls
restricting incoming and outgoing
76
chargers 130
clock
changing time format (am/pm,
24-hour) 64
display on screen 64
set 63
set automatic update of time 65
color covers 131
conference calls 46
contacting Nokia 6
contacting your service provider 7
currency conversion 109
Customer Care 7, 9
D
data entry, internet 116
digital/analog selection 53
E
earpiece volume 19
e-mail messages
forwarding 96
reading 94
receiving 94
saving an e-mail address in the
phone book 91
sending 92
emergency calls 124
emergency key 9 68
erasing stored numbers 35
ESN number 6
exchange rate, calculating 110
G
game tones 60
games
pairs 2 111
playing 111
snake 2 112
space impact 111
starting 111
glossary of terms 137
H
hearing impaired solutions 8
I
icons 4
icons on the screen 18
in-call options 44
interactive user guide 5
interference 1
internet access 113
internet, connecting to 113, 114
8265_1.BOOK Page 150 Friday, October 19, 2001 3:06 PM
[ 151 ]
K
keyguard 75
keypad tones, setting 60
keypad, locking 75
keys
Power 13
selection 15
keys, learning 13
L
label 6
language, setting the phone 63
letters
ABC entry method 28
enter 28
uppercase and lowercase 29
lights, setting (car kit only) 61
listening to voice messages 38
lock code 73
loopset 8
how it works 9
LPS-3 8
M
maintenance 127
memory 89
memory status, checking 36
menus
navigate 22
phone book 31
scroll 22
shortcuts 22
Menus, navigating using the scroll
method 22
message alert tone 61
missed calls, checking 40
model number 6
N
names
editing 29
network services
setting 79
numbers
enter 29
O
one-touch dialing 66
P
personal assistant 97
phone
accessories 128
maintenance 127
protecting with lock code 73
reference information 119
safety guidelines 120
security 72
phone book
adding an e-mail address 91
adding names and numbers 33
changing stored numbers 33
erasing entries 35
erasing whole 35
menus 31
unique entries 31
use number 117
views 32
phone book menu 27
phone book menu options 27
phone number, selecting 53
phone system
selecting 79
selecting automatically 80
selecting different 79
8265_1.BOOK Page 151 Friday, October 19, 2001 3:06 PM
[ 152 ]
selecting manually 80
selecting public 80
switching from private to public
80
Power key 15
predictive text
character counter 84
predictive text input
keys and tools 84
turning off 85
turning on 83
using 83
previously dialed calls, checking 41
profiles
customizing 57
list 56
renaming 62
selecting different 57
punctuation 29
Q
questions, frequently asked 133
R
received calls, checking 41
redialing automatically 49
redialing same number 34
reference information 119
restoring factory settings 62
restricting incoming and outgoing
calls 76
ringing options 58
ringing tone 59
ringing tones, downloading 105
ringing volume 58
roaming 81
HOME 81
indicators 81
S
scroll bar 16
Scrolling method 22
security 72
security code 72
changing 72
preset (default) 72
serial number 6
service provider
signing up 5
service provider, contacting 7
services menu 115
settings
restoring factory defaults 62
shortcut
method 22
special characters 29
Start screen 15
T
terms 3
terms used in this guide 137
text conventions 4
text messages
erasing 90
forwarding 90
receiving 87, 94
resending from the outbox 87
sending 86
touch tones
setting 54
setting length 54
storing sequences (strings) 55
troubleshooting (FAQs) 133
8265_1.BOOK Page 152 Friday, October 19, 2001 3:06 PM
[ 153 ]
U
understanding wireless network ser-
vices 5
updates to this guide 5
V
vibrating alert 59
voice mail 37
greetings and passwords 38
listening to messages 38
message received 37
setting up 37
voice privacy 20
W
WAP 113
warning tones 60
web address for updates 5, 111
welcome note, adding 66
wireless network services 5
X
Xpress-on color covers 131
8265_1.BOOK Page 153 Friday, October 19, 2001 3:06 PM
[ 154 ]
NOTES
8265_1.BOOK Page 154 Friday, October 19, 2001 3:06 PM
[ 155 ]
NOTES
8265_1.BOOK Page 155 Friday, October 19, 2001 3:06 PM
[ 156 ]
Para obtener un manual del usuario en español favor de
llamar o enviar un fax al teléfono 1-888-NOKIA-2U,
fax 813-249-9619.
8265_1.BOOK Page 156 Friday, October 19, 2001 3:06 PM