Microsoft NSD-5FX PCS Band Cellular Transceiver User Manual EN8270ug
Microsoft Mobile Oy PCS Band Cellular Transceiver EN8270ug
Revised Manual
Nokia 8270
User Guide
Manufactured or sold under one or more of the following U.S. patents:
5737323, 5758278, 6076181, 5889770, 5802465, 5491718, 5859843, 6078570,
99162, 07278, 6088342, 6167038, 6148290, 5444816, 5699482, 4969192,
5754976, 5701392, 5793744, 5596571, 6009129, 6005889, 6055264, 6084471,
5990740, 6154455, 5854978, 5790957, 6205325, 6253075, 5440597, 5796757,
6292474, 6029065, 5887250, 5821891, 5887252, 5708656, 6047071, 5929813,
6025802, 5642377, D405445, D406583, D414189, D405784, D423515. Others:
4558302, 4901307, 5056109, 5101501, 5109390, 5265119, RE 32580.
The wireless phone described in this guide is approved for use in CDMA
1900 networks.
LEGAL INFORMATION
Part No. XXXXXX, Issue 1
Copyright 2002 Nokia Mobile Phones. All rights reserved.
Nokia is a registered trademark of Nokia Corporation.
Printed in Canada 4/2002
Nokia, Nokia Connecting People and the Original Accessories logos are
trademarks of Nokia Corporation and/or its affiliates.
US Patent No 5818437 and other pending patents.
T9 text input software Copyright 1999-2001. Tegic Communications, Inc.
All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software
from RSA Security.
The information contained in this user guide was written for Nokia phone
3280. The right to make changes and improvements to any of the products
described in this guide without prior notice is reserved.
EXPORT CONTROLS
This product contains commodities, technology or software exported from
the United States in accordance with the Export Administration regulations.
Diversion contrary to U.S. law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your phone may cause TV or radio interference (for example, when using a
telephone in close proximity to receiving equipment). The FCC or Industry
Canada can require you to stop using your telephone if such interference
cannot be eliminated. If you require assistance, contact your local service
facility. This device complies with part 15 of the FCC rules. Operation is
subject to the condition that this device does not cause harmful
interference.
[ 9 ]
1
1 FOR YOUR SAFETY
Read these simple guidelines. Breaking the rules may be dangerous or
illegal. Further detailed information is given in this manual.
SWITCH OFF WHERE PROHIBITED
Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
ROAD SAFETY COMES FIRST
Don't use a wireless phone while driving.
INTERFERENCE
All wireless phones may get interference, which could affect
performance.
SWITCH OFF IN HOSPITALS
Follow any regulations or rules. Switch the wireless phone off
near medical equipment.
SWITCH OFF IN AIRCRAFT
Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Don't use the wireless phone at a refueling point. Don't use near
fuel or chemicals.
SWITCH OFF NEAR BLASTING
Don't use the wireless phone where blasting is in progress.
Observe restrictions, and follow any regulations or rules.
USE SENSIBLY
Use only in the normal position. Don't touch the antenna
unnecessarily.
[ 10 ]
1
QUALIFIED SERVICE
Only qualified personnel may install or repair phone equipment.
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do not connect
incompatible products.
ACCESSORIES
Use only approved accessories. Do not connect incompatible
products.
WATER-RESISTANCE
Your wireless phone is not water-resistant. Keep it dry.
CALLING
Ensure the phone is switched on and in service. Enter the phone
number, including the area code, then press [handset up]. To end
a call, press [handset down]. To answer a call, press [handset
up].
EMERGENCY CALLS
Ensure the phone is switched on and in service. Press [handset
down] as many times as needed (for example, to exit a call, to
exit a menu) to clear the display. Enter the emergency number,
then press [handset up]. Give your location. Do not end the call
until told to do so.
Note:You can also press and hold the 9 key to make an
emergency call, if the emergency key 9 feature is activated.
[ 11 ]
2
2) Welcome
• BEFORE YOU BEGIN
This section provides information needed before you use your phone.
This guide describes the Nokia 8270 phone, which is approved for use in
CDMA 1900 networks.
• UNDERSTAND NETWORK SERVICES
This guide describes a number of features known as network services. You
must arrange for these special services through your wireless service provider.
Before you can use these network services features, you must subscribe
to them through your service provider. Your service provider will instruct
you on the use of these services. This guide informs you when you need
to contact your service provider for more step-by-step information.
Note:Some networks may not support all language-dependent
characters and/or services.
• VISIT NOKIA ON THE WEB
The latest version of this manual may be available on Nokia’s World Wide
Web site at:
www.nokia.com
2
[ 12 ]
• CONTACT NOKIA
To help Nokia promptly answer your questions, please have your phone’s
model number, ESN number, and your local zip code ready when you call
Customer Service. The ESN and model number are on the back of your
phone under the battery. If you’re calling about an accessory, please have
it available for reference.
Nokia Customer Care Center
7725 Woodland Center Boulevard, Suite 150
Tampa, FL 33614
Tel: 1-888-NOKIA-2U (1-888-665-4228)
Fax: 1-813-249-9619
TTY:1-800-24-NOKIA (1-800-246-6542)
Customer Care, Canada
Nokia Products Ltd.
601 Westney Rd. South
Ajax, Ontario L1S 4N7
Tel:1-888-22-NOKIA (1-888-226-6542)
Fax:1-905-427-1070
[ 13 ]
3
3) Prepare your phone for use
• INSTALL THE BATTERY
Place the battery in the grooves on the back
of your phone, then slide the battery
upward until it clicks.
• CHARGE THE BATTERY
Before you use your phone and when the battery runs down, you need to
charge it.
1Connect the lead from the charger to the bottom of the phone.
2Connect the charger to an AC wall outlet.
If the phone is turned on, the messages Charger
connected and then Charging appear. Then
the battery power indicator bar starts to flash
up and down (scroll).
• You can use the phone while the
battery is charging.
•Important: Disconnect your phone from the charger if the phone
becomes hot while you’re making a call.
• If the battery is totally empty, it might take a few minutes before
the charging indicator appears on the screen.
• The time to charge the battery depends on the charger you use.
• The battery is fully charged when the battery indicator bar stops
scrolling and the Battery full message appears (if phone is on).
3
[ 14 ]
3Disconnect the charger from the AC outlet and the phone:
• When a charger is not in use, disconnect it from the power source.
• Do not leave the battery connected to a charger for longer than
a week. Overcharging the battery could shorten its life span. If left
unused, a fully charged battery will discharge itself over time.
• REMOVE THE BATTERY
Note:Make sure the phone is off.
1Press and hold the button at the top of the battery.
2Slide the battery toward the bottom of the phone.
3Lift the battery off the phone.
[ 15 ]
4
4) Get to know your phone
• KEYS AND SCREEN
Power key
Selection keys
End key
Number
keys
Special
character
keys
Voice mail
Scroll keys
Talk key
Screen
Earpiece
Microphone
4
[ 16 ]
Keys
Power key
Switch the phone on or off (press and hold for more
than one second
Selection keys
Perform the function indicated by the text on the
screen above the key
Scroll keys
• Scroll menu items and move the highlighter line
up and down in a list of displayed items
• Move the cursor to enter numbers and text
• Display the phone book
Talk key
• Make a call (enter phone number and press key)
•Answer a call
• Display a list of recently-dialed numbers
(display the Start screen, then press this key)
End key
•End a call
• Silence the ringing for an incoming call (you
can still answer the call by pressing )
• Return to the Start screen at any time
[ 17 ]
4
Warning: Do not switch on the phone where wireless phone use is
prohibited, or where the use of a phone might cause interference or could
be a danger. For more information, see “Important safety information” on
page 111.
To turn the phone on or off, press and hold the power key for a few
seconds. To turn off the phone, you can also quickly press the power key
then press OK.
Start screen
When you turn on your phone, a service provider
screen (or a welcome note, if you have created
one) appears for a moment, then the Start screen
appears. The Start screen is the “home base” for
your phone. To return to this screen, press at
any time except during a call (unless you want to
hang up).
- Number keys
Enter numbers and letters
Enter a space while entering text, press .
Call your voice mailbox, press and hold .
Make an emergency call, press .
Make a call using one-touch dialing (press and
hold the appropriate number key)
Star key - Insert special characters
Pound key
• Change modes when entering text
• Type of text input (multitap/predictive)
• Letter case (upper/lower)
• Character type (letters/numbers)
4
[ 18 ]
Tip:While entering characters into your phone, if you press ,
the characters are not saved.
• NAVIGATION KEYS
Selection keys
Use the selection keys to navigate through and select
the phone’s many options. At the Start screen, two
options appear: Menu and Names. The selection keys
are just below these options:
• The left selection key ( ) appears below Menu.
• The right selection key ( ) appears below Names.
At the Start screen, when you press the left selection key ( ), the menu
item, Messages, appears. The text above the left selection key changes to
Select and the text above the right selection key changes to Exit.
At the Start screen, when you press the right selection key ( ), a list of
options for the Names (phone book) feature appears, along with the same
Select and Exit options that appear when you select Menu.
This guide refers to the selection keys by the names that appear above them.
Example: “Press Menu” means to press the selection key below the word
Menu.
Scroll keys
Use the scroll keys ( and ) to:
• Scroll the menu items and move the highlighter line up and down in
a list of displayed items
• Move the cursor (flashing, vertical line) when entering letters and
numbers
• Display the phone book (at the Start screen, press to view a list
of phone book entries)
[ 19 ]
4
Scroll bar
When you press Menu, a scroll bar appears on the
far right side of the Start screen. This bar appears
as a straight line with one tab, and it indicates
your location in the menu.
As you progress through the menu, the tab moves
lower on the scroll bar. If you move backward through the menu, the tab
moves up.
• INDICATORS AND ICONS
Indicators
Signal strength - The signal strength of the
wireless network at your current location. The
greater the number of bar segments, the stronger the
signal.
Battery charge status - While the battery charges, the bar segments on
the indicator move upward to show that the battery is charging. While the
phone is not connected to a charger, the greater the number of bar
segments, the greater the level of charge.
Earpiece volume - Appears when you adjust the earpiece volume (
and ) during a call.
Icons
Active call - A call is in progress.
Alarm - The alarm clock is set.
Keyguard - Keyguard is activated. This prevents accidental key
presses. To deactivate it, press Unlock, then .
4
[ 20 ]
Letter mode (lower case) - Characters are entered as lower
case letters. To switch to upper case letter mode, press .
To switch to number mode, press and hold .
Letter mode (upper case) - Characters are entered as upper
case letters. To switch to lower case letter mode, press .
Number mode - Characters entered are numbers. When you
are entering letters, you can switch to the number mode by
pressing and holding .
Reminder (To Do) - You have a calendar reminder to do
something.
Reminder (Birthday) - You have a calendar reminder calendar
that someone’s birthday is on that date.
Reminder (Call) - You have a calendar reminder to call someone.
Reminder (Meeting) - You have a calendar reminder of a meeting.
Roaming - Your phone is roaming outside its home system.
Silent tones - You selected the Silent profile (tones are off).
Special characters - Highlight a special character, then press
Insert. To switch to this mode while you are entering letters,
press .
Text entry (predictive, lower case) - The phone is ready for
you to enter lower case letters in the predictive text input
mode.
Text entry (predictive, sentence case) - The phone is ready for
you to enter letters in the predictive text input mode. The first
letter of the first word in each sentence will be upper case.
[ 21 ]
4
Text message - You have one or more new text messages.
Voice message - You have one or more new voice messages. To
call your voicemail box, press and hold .
5
[ 22 ]
5) Make and answer calls
• MAKE A CALL
1If keyguard is active, press Unlock, then the
star key to deactivate it.
2Enter the phone number (if necessary, enter a
1 and the area code).
If you make a mistake while entering the
number, press to move the cursor to the left and to move
it to the right. To delete the character to the left of the cursor, press
Clear. To delete all characters, press and hold Clear.
3Press . To end the call or to cancel the call, press .
Notes
• For information about blocking caller ID, See “Choose to block caller
ID” on page 49.
• Your phone does not have a dial tone.
• For best signal reception, fully extend the antenna.
• Hold the phone as you would any other telephone, with the earpiece
over your ear and the microphone near your mouth.
• It is normal for your phone to become warm during use. If the phone
becomes too warm, it automatically drops the current call and returns
to the Start screen. Until the phone cools, you will be unable to receive
or make calls.
• END A CALL
To end a call or to cancel the call, press . To clear any characters
from the screen, press again.
[ 23 ]
5
Answer a call
To answer a call, press . To end the call, press .
NOTES
• If the Anykey answer feature (Menu 4 - 1 - 4) is set to On, you can
answer the call by pressing any key except or . However,
if Keyguard is active, you must press to answer the call, even
if the Anykey answer feature is set to On.
• If the wireless network cannot identify the caller’s phone number or
if the caller has chosen to block caller ID, the message Caller ID
unavailable or Caller ID blocked may appear. If two entries in your
phone book have the same phone numbers for both entries, the caller’s
name does not appear when they call.
• If you want to stop your phone quickly from ringing (for example, if
you’re in a public place), press the End key . As long as the
caller’s phone number (or name) remain on the screen, you can still
answer the call.
Adjust the earpiece volume
During a phone call, you can adjust the volume for your phone’s earpiece:
• The top volume key increases volume, and the bottom one decreases
the volume. The volume keys only adjust volume during phone calls.
• If an accessory, such as a headset or a handsfree device or one with
its own loudspeaker, is connected to your phone, the volume keys will
adjust the volume for that accessory as well.
Redial the last-dialed number
To return to the Start screen (press ), then press two times.
Get a strong signal
Your phone operates on radio waves, and the reception quality depends
on the radio signal strength in your area. A wireless network maintains
the radio coverage, and the quality of calls on a wireless phone depends
on the wireless radio signal strength.
5
[ 24 ]
Tip:For best results, fully extend the antenna. As with all radio
transmitting devices, do not touch the antenna unnecessarily when
the phone is on. Contact with the antenna affects call quality and
may cause the phone to operate at a higher power level.
An indicator on the left of the Start screen displays the radio signal strength.
More segments mean a stronger signal. To improve reception, move your
phone slightly; if you’re indoors, move toward a window.
Your phone is optimized for digital service in a compact size. When your
phone operates in analog mode, the service area where you can make and
receive calls may be smaller.
Keep calls private
The Voice Privacy feature encrypts the voice channel so that no one can
eavesdrop on your phone conversations. Voice Privacy is a network service,
so you must contact your service provider to access the feature.
By default, the voice privacy setting on your phone is set to Off. To turn
it on:
1Press Menu 4 - 4 -1 (Settings - Network services - Voice privacy).
2Scroll to On, then press OK.
During a call, Voice Privacy notifies you that it is active with a beep and
the message Voice privacy active on the screen. During a call, your phone
sounds two short beeps and displays the message Voice privacy not active
if voice privacy is lost.
[ 25 ]
6
6) Use phone menus
• NAVIGATE MENUS
A menu lists choices that appear on your phone’s screen. To navigate menus,
you can scroll or use shortcuts.
Scroll through menus
You can navigate menus by scrolling through them:
•Menu appears above the left selection key only while the Start screen
is displayed. To display the Start screen, press .
• To scroll through menus, select Menu, and press and .
• To select an item, press the selection key (Select, OK, or Options).
• To return to the previous screen, press Back or Exit.
• To return to the Start screen, press .
• If you highlight an item and return to a previous screen or the Start
screen, the highlighted menu item will not be selected.
• If you use your keypad to enter characters and then return to the
previous screen or the Start screen, the characters will not be saved.
Use a shortcut
To navigate to a menu item quickly without scrolling, use a menu shortcut.
A shortcut number for each menu item appears in the upper right corner
of the screen. For example, to adjust the ringing volume, display the Start
screen by pressing , then press Menu 3 - 1 - 2 - 2. Don’t pause
for more than two seconds between key presses.
Note:The number of main menus in your phone, determines
whether you may need to press the 0 key before you enter
a shortcut that begins with “1” and is followed by the 1 key
and any other key(s). For example, to display the Inbox menu (1 -
1 - 2), press Menu .
Most menu items in your phone have a brief help message. To view
the help message for a menu item, scroll to an item and wait for
10 seconds.
6
[ 26 ]
• LIST OF MENU SHORTCUTS
Your phone’s menu may differ from the following list. The list depends on
the network services to which you subscribed and the accessories you are
using. If you have any questions, call your service provider.
MESSAGES
Text messages (0-1-1)
Write new* (0-1-1-1)
Inbox (0-1-1-2)
Outbox* (0-1-1-3)
Saved (0-1-1-4)
Erase (0-1-1-5)
All read (0-1-1-5-1)
All in inbox (0-1-1-5-2)
All in outbox (0-1-1-5-3)
All saved (0-1-1-5-4)
Voice messages (0-1-2)
Listen to voice messages (0-1-2-1)
Voice mailbox number (0-1-2-2)
Welcome note (0-1-3)
Minibrowser messages* (0-1-4)
* Availability depends on your arrangement with your service provider.
CALL LOG
Missed calls (2-1)
Received calls (2-2)
Dialed calls (2-3)
Clear call lists (2-4)
All (2-4-1)
Missed (2-4-2)
Received (2-4-3)
Dialed (2-4-4)
Call timers (2-5)
Last call (2-5-1)
All calls (2-5-2)
Life timer (2-5-3)
Clear timers (2-5-4)
[ 27 ]
6
PROFILES
Normal* (3-1)
Select (3-1-1)
Customize (3-1-2)
Ringing options (3-1-2-1)
Ringing volume (3-1-2-2)
Ringing tone (3-1-2-3)
Vibrating alert (3-1-2-4)
Keypad tones (3-1-2-5)
Warning and game tones (3-1-2-6)
Message alert tone (3-1-2-7)
Lights** (3-1-2-8)
Automatic answer** (3-1-2-9)
Silent (3-2)
Meeting (3-3)
Outdoor (3-4)
Pager (3-5)
Handsfree **
Headset **
* Menu items that appear under the Normal profile also appear under all
other profiles, but the second digit of the shortcut differs. For example,
the shortcut for the Ringing options menu item for the Normal profile is
3-1-2-1; for the Silent profile, the shortcut is 3-2-2-1.
** This menu item does not appear until the phone has been connected to
a handsfree/headset device at least once.
SETTINGS
Call settings (4-1)
Emergency key 9 (4-1-1)
Automatic redial (4-1-2)
Calling card (4-1-3)
Anykey answer (4-1-4)
Minibrowser confirmation* (4-1-5)
Phone settings (4-2)
Clock (4-2-1)
Alarm clock (4-2-2)
Touch tones (4-2-3)
6
[ 28 ]
Restore factory settings (4-2-4)
Language (4-2-5)
Security settings (4-3)
Restrict calls (4-3-1)
Access codes (4-3-2)
Network services (4-4)
Voice privacy* (4-4-1)
Call forwarding** (4-4-2)
Call waiting** (4-4-3)
Send own caller ID with next call** (4-4-4)
Network feature setting (4-4-5)
NAM selection (4-4-6)
NAM update* (4-4-7)
Automatic update of service* (4-4-8)
* Availability depends on your arrangement with your service provider.
** This menu item will not appear until the feature has been activated. See
“Choose to block caller ID” on page 49.
SYSTEM*
Home area (5-1)
Automatic A (5-2)
Automatic B (5-3)
* The list of menu items may differ according to service provider.
GAMES
Memory/Pairs (6-1) (may vary by service provider)
Snake (6-2)
Logic (6-3)
Dice (6-4)
CALCULATOR
CALENDAR
MINIBROWSER*
* Availability depends on your arrangement with your service provider.
KEYGUARD
[ 29 ]
7
7) Enter characters into your
phone
Note:To enter characters quickly into a mobile message, see
“Working with predictive text input” on page 76.
• ENTER CHARACTERS (EXCEPT IN A PHONE
NUMBER FIELD)
Use the following guidelines when entering characters into any field except
a phone number field (for example, the Name field in your phone book, a
note in your calendar, or a mobile message):
Enter letters
To enter a letter that appears on a key, press the key as many times as
necessary until the letter appears. For example, to enter the letter “a”, press
the 2 key ( ) once. To enter the letter “c”, press the 2 key ( ) three
times.
Change letter case mode
To change the mode that controls whether letters you enter are upper case
(capital) or lower case , press the pound key ( ).
Enter numbers
To enter one or just a few numbers, press the appropriate number key as
many times as necessary until the number appears. To enter many numbers,
it is easier to change to number entry mode (press and hold the pound key
().
Erase characters
To erase one character, position the cursor to the right of the character,
then press Clear. To erase all displayed characters, press and hold Clear.
Change between letter entry mode and number entry mode.
7
[ 30 ]
To change between letter entry mode ( / ) and number entry mode
(123), press and hold the pound key ( ).
Enter a space
To enter a space, press the ( ).
Enter special characters
To quickly enter one of the most common special characters, press ( )
several times until the character appears. To see a list of all special
characters, press ( ). Scroll until the character you want to insert is
highlighted, then press Insert. To move up and down quickly between
rows of characters, press ( ). To move quickly to the last character in
the last row, press .
• ENTER CHARACTERS INTO A PHONE NUMBER FIELD
While entering numbers into a phone number field, press the star key
( ) as many times as necessary until one of the following special
characters appears:
*Bypass an automated attendant.
+Precede an international telephone number.
pCreate a pause when a number is dialed. The numbers you enter after
this special character are automatically sent as touch tones after a
2.5-second pause. For example, the characters after the “p” could be
a PIN number that you are required to enter when you call the phone
number.
wCreate a wait when a number is dialed. Your phone “waits” for you to
press before it sends the string of numbers as touch tones. The
difference between “p” and “w” is that if you use “w”, you can control
when the touch tones are sent.
[ 31 ]
8
8) Use the phone book
Note:Your phone book stores up to 250 names with phone
numbers. Numbers can contain 32 digits; names can contain 26
characters. Make entries unique; you cannot store identical names in
your phone.
Example: You can’t have one entry for John Jones with a home number
and another entry for John Jones with a work number. You need to store
the names as John Jones Work and John Jones Home.
If you enter a name that is already in your phone book, the message
Replace? appears, followed by the stored name. Press Back to end this
sequence without replacing the name.
• USE PHONE BOOK MENUS
The phone book has several menus. These menus appear when you press
Names. Use the scroll keys to move to the menu you want to use.
Search Search for a specific name.
Add new Enter new names and numbers.
Options Choose a scrolling view and show the memory status.
One-touch
dialing
Assign one to one-touch dial locations (speed dialing).
See “Use one-touch dialing” on page 62.
Erase all
Erase all names and numbers. To erase one name and
number at a time, while viewing the name press Details
or Options. Scroll to Erase. Press Select.
Own
number
Display your own phone number.
8
[ 32 ]
Change views
You can view your phone book in three different ways:
In all views, use the scroll keys to move through the list of names.
Select a scrolling view
You can select the scrolling view that you prefer:
1From the menu, press Names.
2Scroll to Options. Press Select.
3Highlight Scrolling view, and press Select.
4Scroll until the name of the desired view appears. Press OK.
• ADD NAMES AND NUMBERS
You can add names and numbers to your names list:
1Press Names.
2Scroll to Add new, and press Select.
3Using the keypad, enter the name. Use the key to switch
between upper and lowercase letters.
4Press OK.
5Enter the phone number. Press OK.
Name list Shows all the names that are stored in your phone
book. Three names appear on the screen at a time.
Name+number
Shows individual names and numbers. One name
appears on the screen with its corresponding phone
number. Name + number is the default setting.
Name only Displays individual names. To view the phone number,
press Details and scroll up or down.
[ 33 ]
8
You can also enter numbers by using a shortcut from the Start screen:
1Enter a phone number, and press Save.
2Enter a name at Name.
Note:Step 2 is optional.
3Press OK.
• CHANGE A STORED PHONE NUMBER
You can change a number without changing its associated name.
1Press Names.
2When Search appears, press Select.
3Enter the first few letters of the name of the phone book entry you
want to change, and press OK.
If you chose Name only or Name list as your scrolling view, continue
to step 4. If you chose Name+number as your scrolling view, proceed
to step 5.
4Press Details to view the number.
5Press Options.
6If Edit is not highlighted, scroll to it. Press Select.
7Press OK. The associated number appears. To move the cursor, scroll
up and down. To erase one character, press Clear. To erase all
characters, press and hold Clear.
8Enter the new number, and press OK.
• RECALL AND REDIAL NUMBERS
You can recall and dial numbers using one of four methods.
To recall and dial a number:
8
[ 34 ]
1At the Start screen, press or to display the names and
associated numbers that are stored in your phone book.
2Scroll to the appropriate name. Press to dial the associated
number.
OR
1At the Start screen, press Names.
2Enter the first few letters of the name you want to call.
3When the appropriate name/number appears on the screen, press
to dial this number.
OR
1At the Start screen, press Names.
2At Search, press Select.
3Enter the name of the person you want to call, and press OK.
4When the appropriate name/number appears on the Start screen,
press to dial this number.
OR
1Or press and scroll through the dialed calls list and press the
Talk key again to dial the desired number
• ERASE STORED NAMES AND NUMBERS
Note:You cannot undo Erase functions, so be careful!
1Using one of the methods described in “Recall and redial numbers” on
page 33, recall the stored name and its associated number.
If you chose Name only as your scrolling view, continue to step 2.
If you chose Name+number as your scrolling view, proceed to step 3.
2Press Details.
[ 35 ]
8
3Press Options.
4Scroll to Erase. Press Select. (Erase? appears.)
5Press OK to erase the name and associated number.
• ERASE THE ENTIRE PHONE BOOK
You can erase the contents of your phone book. Note that this action
cannot be reversed! Once you have performed this procedure, all the
stored information in your phone book is erased.
To erase all the contents of your phone book:
1Press Names.
2Scroll to Erase all. Press Select.
The message Are you sure? appears.
3If you truly want to erase the entire contents of your phone book,
press OK.
The Security code field appears.
4Enter your security code, and press OK.
• CHECK MEMORY STATUS
You can check to see how many free and in-use memory locations are in
your phone book:
1Press Names, and scroll to Options. Press Select.
2Scroll to Memory status. Press Select.
A message appears that says Phone: xx free, xx in use, where xx
indicates the number of memory locations (phone book entries.)
9
[ 36 ]
9) Use voice mail
Voice mail is a network services feature. Colleagues who miss you when
they call can leave a voice message, which you can retrieve later.
• RETRIEVE A MESSAGE
You will be notified when a voice message is available:
• Your phone beeps when you receive a voice message. The message
New voice message appears on the screen, along with the icon.
• If you receive more than one voice mail message, your phone may
display the number of messages that you received. This feature is
dependent on your wireless network provider.
Note:To use voice mail, you need to learn the voice mail system’s
various greetings, passwords, and prompts. Your service provider
can furnish instructions.
• SET UP YOUR VOICE MAILBOX
As part of your network’s voice mail feature, your service provider gives
you a voice mailbox phone number. Save this number in your phone to
make getting your voice messages quick and convenient.
1Press Menu 0 -1 - 2 - 2 (Messages - Voice messages - Voice
mailbox number).
2Enter your voice mailbox phone number.
3Press OK.
•Press Yes if you want to save a hidden voice mailbox password in
your phone.
•Press No if you don’t.
4If you selected Yes, enter your security code.
[ 37 ]
9
5Press OK.
6Enter your voice mailbox password, and press OK.
Your voice mailbox number can be up to 32 digits long and is used until
it’s changed. Therefore, if your phone number changes, you may need to
change your voice mailbox number along with it.
• SET GREETINGS AND PASSWORDS
The greetings and passwords may vary in different wireless systems. If you
need information about how to record your greeting or how to store your
password, contact your service provider.
Note:If you store your voice mailbox password in your phone, the
phone immediately sends the password after you dial your voice
mailbox number.
• LISTEN TO YOUR VOICE MESSAGES
Note:The way you listen to your voice messages may vary
depending upon your service provider. Call your service provider if
you have any questions.
1When your phone alerts you to new voice messages, press Listen and
follow the instructions given on the phone.
2If you prefer to listen to your messages later, press Exit.
3To listen to your voice messages at a later time:
Press and hold the 1 key.
OR
Press Menu 0 -1 - 2 - 1 (Messages - Voice messages - Listen to
voice messages).
The message Calling voice mailbox appears on the screen. Follow the
prompts to access your messages.
9
[ 38 ]
Voice message notification
A caller who leaves a voice message can specify a priority level if your
network supports this feature:
•New voice message: This normal priority message can be sent by anyone.
•Urgent voice mail: The person who sends an urgent message is
requesting an immediate reply. The urgent message can be sent by
anyone.
•Emergency voice mail: The emergency message can only be sent by
a network operator or person in authority when life or property is
threatened.
New voice message notifications overwrite older ones, regardless of the
priority level. For example, if Emergency voice mail appears and you
receive a new voice message of normal priority, the emergency message
notification disappears and New voice message appears.
Clearing the voice message icon
In most networks, the voice message icon is automatically cleared a few
seconds after you listen to your last new message. If the network where
you are using your phone does not automatically clear the voice message
icon, you can manually clear the icon:
Press Menu 0 - 1 - 2 - 3 (Messages - Voice messages - Clear voice
message icon), then press Clear.
[ 39 ]
10
10) Work with the call log
The Call log (Menu 2) records information about
the last 10 calls made, received, or missed:
• Phone number associated with the call
• Date and time when the call connected
The call log records the length of the most recent
call you made or received, the total of all calls you made or received during
a time period (Call timer), and the total duration of all calls you make or
receive during the lifetime of your phone (Life timer).
NOTES
• The call log records missed calls only if the phone was on and in your
service provider’s area when you received the call.
• If you chose the Forward if not answered option in “Use call
forwarding” on page 46, the call log records the call as missed.
• VIEW INFORMATION ABOUT RECENT CALLS
Use the menu shortcuts to display the type of recent call list to view:
•Missed calls - Menu 2 - 1
•Received calls - Menu 2 - 2
•Dialed calls - Menu 2 - 3
To view dialed calls, you can also press , then scroll.
Note:If necessary, scroll the list until the number (or name)
appears. To call the number for the displayed item quickly, press
.
1Press Options, and scroll to the appropriate option:
•Call time - Shows the date and time of day when the call was
connected. (Appears only if the clock has been set.)
1
[ 40 ]
•Edit number - Allows you to edit the number on the screen.
•Save - Allows you to add the phone number to your phone book.
•Erase - Allows you to erase the entry from the call log.
•View number - Allows you to view the associated phone number
in your phone book. (Appears only if a name from your phone book
appears on the screen.)
2Press Select.
• CLEAR THE RECENT CALLS LIST
Note:Logged calls that were cleared from a call list cannot be
recovered.
1Press Menu 2 - 4 (Call log - Clear call lists).
2Scroll to All to clear the logged calls from all lists: Missed, Received,
or Dialed.
Note:When you clear the Dialed calls list, the list that appears
when you press and a scroll key is also cleared.
3Press OK. If you chose All, enter your security code, then press OK.
The logged calls are cleared from the chosen list(s).
• VIEW THE DURATION OF CALLS
View the duration of the last call
Press Menu 2 - 5 (Call log - Call timers). The duration of the last call
appears. (If you choose to show the current call timer on the Start screen,
you can see it during your call. To show it, see “Show/hide the current call
timer” on page 41.)
[ 41 ]
10
View the total duration of all calls
Your phone uses two timers to record the total duration of all calls:
CALL TIMER
The call timer can be cleared (reset to zero), so it is useful for monitoring
how much talk time you have used. It records the total time of all calls since
the timer was last cleared. To view the call timer value:
1Press Menu 2 - 5 (Call log - Call timers).
2Scroll to All calls. The call timer value is displayed.
Note:Your phone has a separate timer for each NAM assigned to
your phone. The timer values apply to the currently-selected NAM.
LIFE TIMER
The life timer records the total duration of all calls for the entire life of
your phone. This timer cannot be reset. To view the call timer value:
1Press Menu 2 - 5 (Call log - Call timers).
2Scroll to Life timer. The life timer value is displayed.
• CLEAR (RESET) THE CALL TIMER
Note:After this call timer is cleared, the value cannot be
recovered. Before you clear the call timer, record the value.
1Press Menu 2 - 5 - 4 (Call log - Call timers - Clear timers).
2Enter your security code, and press OK. The timer value is cleared.
• SHOW/HIDE THE CURRENT CALL TIMER
You can show the current call timer on the screen to view during a call.
1Press Menu 2 - 5 (Call log - Call timers).
2Press Details, and press Select.
3Scroll to On (show) or Off (hide). Press OK.
11
[ 42 ]
11) Use advanced calling features
• SET IN-CALL OPTIONS
Your phone allows you to use several features uring
a call. dThese features are in-call options.
Note:Many in-call options are network
services features that may require a subscription from your service
provider.
You cannot use all options at all times. This section explains when you can
use a certain option.
1To access an option during a call, press Options.
2Choose from some or all of the following options:
Touch
tones
Allows you to enter a touch tone string manually or search
for a string in your phone book.
New call
Allows you to place the call to the third party when
making a conference call. See “Make a conference call” on
page 45.
Menu Allows you to access the Menu.
Mute Allows you to mute the microphone. If your microphone is
already muted, Mute will change to End mute.
Names Allows you to access the phone book.
[ 43 ]
11
• USE NETWORK FEATURE CODES
Call forwarding, Call waiting, and Send own caller ID with next call are
network services available through your service provider. When you subscribe
to these services, your service provider gives you a feature code that you
store in your phone to activate the service. Your service provider may have
stored feature codes in your phone. A separate deactivation code is used
to deactivate the service.
The network service name will not appear in the menu until you store the
activation code. After you store the activation and deactivation codes, you
can use the menu to activate and deactivate the service.
Note:If your phone has more than one phone number
programmed into the NAM, stored feature codes apply only to
your primary phone number, or NAM 1.
Store network feature codes
1Press Menu 4 - 4 - 5 (Settings - Network services - Network
feature setting).
2Enter the feature code (for example, ), and press OK.
3Scroll to the service name for that code, and press Select.
For example, enter the call forwarding feature code, scroll until the
call forwarding option you want to select appears, then press Select.
Activate network features
Note:Before you can activate a network feature, you must store
the appropriate feature code in your phone.
1Use the appropriate menu shortcut for the feature you want to activate
(Settings - Network services - feature name):
• Call forwarding - Menu 4 - 4 - 2
• Call waiting - Menu 4 - 4 - 3
• Caller ID - Menu 4 - 4 - 4
2Scroll to Activate, and press OK.
11
[ 44 ]
The phone calls the network to confirm activation of the feature. After
network confirmation, the feature is available for use.
Deactivate network features
1Use the appropriate menu shortcut for the feature you want to deactivate
(Settings - Network services - feature name):
• Call forwarding - Menu 4 - 4 - 2
• Call waiting - Menu 4 - 4 - 3
• Caller ID - Menu 4 - 4 - 4
2Scroll to Cancel, and press OK.
Your phone calls the network to confirm deactivation of the feature. After
the network confirms deactivation, the feature is no longer available for
use until you activate it again.
• USE CALL WAITING
Note:Call waiting is a network services feature that may require a
subscription from your service provider.
During a call, if you receive another call, the call waiting feature causes
your phone to beep. Before you can use call waiting, you must store the
call waiting feature code and activate the feature. See “Use network feature
codes” on page 43.
Note:Call waiting may not be available in all wireless systems.
Contact your service provider for details and availability.
• To answer an incoming call, press .
• To switch from one call to another, press .
• To end both calls, press .
[ 45 ]
11
• USE CALLER ID
This network service helps identify incoming calls. Contact your service
provider for details.
When Caller ID is active, your phone may display the caller’s phone number.
The caller’s name may also display if their name and number has been
stored in the phone book or if the wireless network supports it.
Call or Call-caller ID unavailable will display when the wireless network
doesn’t recognize the calling number. Also, Call-caller ID blocked may
display if the calling party has blocked caller ID.
Note:If you have stored a number more than once in your phone
book, and that number is stored each time with a different name,
then a name will not appear when someone calls from that
number. See “Use the phone book” on page 31 for details on your
phone book.
• MAKE A CONFERENCE CALL
You can add a third party to a call (conference call). During a call:
• Dial the phone number of the third party, then press , OR...
• Scroll to the third party’s phone number in your phone book, then
press , OR...
•Press Options. Scroll to New call. Press OK. Enter the phone number.
Press OK.
When the third party answers, press to connect all parties. To end
the call with both parties, press .
Note:To place one party on hold, press again. (If you place a
party on hold, you cannot rejoin all three parties in the same
conversation.) If you press a third time, the party you placed
on hold rejoins the call, and the second party is placed on hold.
11
[ 46 ]
• USE CALL FORWARDING
You can forward incoming calls to another number. Call forwarding is a
network services feature that may require a subscription through your
service provider.
This procedure assumes that you stored the Call forwarding feature code
in your phone and activated the feature. If you have not completed these
steps, you may be able to enter the code manually when you forward your
calls. Just enter the feature code (for example, ) followed
by the phone number where you will forward your calls, then press .
1Press Menu 4 - 4 - 2 (Settings - Network services - Call forwarding).
2Scroll to the desired call forwarding option:
•Forward all calls - Forwards all incoming calls.
•Forward if busy - Forwards calls only when you’re on your phone
and do not have voice mail.
•Forward if not answered - Forwards calls if you don’t answer.
Use this option when you want to give your phone to someone for
a short period of time, but you don’t want them to answer the
phone. For example, you could use this option if you give your
child the phone to take out, in case of an emergency, but you still
want to receive any incoming calls made to this phone.
•Forward if out of reach - Forwards calls if you are out of the
serving wireless network or if your phone is turned off.
•Cancel call forwarding - Cancels call forwarding.
3Press Select.
4If you chose an option other than Cancel call forwarding, enter the
phone number where your calls are to be forwarded (or press Search
to find the number in your phone book). Press OK.
Wait for your phone to call the network and confirm your choice. If
your choice is confirmed, the feature is available for use.
[ 47 ]
11
• REDIAL AUTOMATICALLY
If you make a call and the line is busy because of problems in the wireless
network, your phone can automatically redial the number three times. Press
Menu 4 - 1 - 2 (Settings - Call settings - Automatic redial). Scroll to
On. Press OK. To stop a series of redialing attempts, press Quit or .
• USE A CALLING CARD
The calling card feature allows you to store calling card information in
your phone, making it easy for you to make a calling card call quickly. Your
phone can store information for four calling cards.
Determine the dialing sequence for your card
Before you store the calling card information in your phone, determine
the dialing sequence for your calling card. This sequence should be printed
on your card. If it is not, contact the calling card company:
• Access no. + phone no. + card no.
• Access no. + card no. + phone no.
• Prefix + phone no. + card no.
NOTES
•Access no. - This number is usually a 1-800 number that is listed on
the back of the calling card.
•Phone no. - The phone number of the party you are calling.
•Card no. - The unique number for your card. The card may also specify
that you enter a PIN number after your card number.
•Prefix - Any number(s) that must precede the phone number of the
party you are calling.
Store calling card information in your phone
1Press Menu 4 - 1 - 3 (Settings - Call settings - Calling card).
2Scroll until the name of the card you want to enter or edit appears.
11
[ 48 ]
By default, the card names are A, B, C, and D, but you can change the
names. Press Options.
3Scroll to Edit, and press OK.
4Enter your security code, and press OK.
Dialing sequence appears.
5Press Select.
6Determine the dialing sequence for your card. Scroll the list of dialing
sequences until the one you want appears, then press Select.
7When you are prompted, enter the information (access number, card
number, or prefix number). After entering each number, press OK.
At the access number prompt, if your access number is entered in your
phone book, press Search to retrieve it quickly.
8When you finish entering the calling card information, Save
changes? appears. Press OK.
9Scroll to Card name, press Select, and enter a card name.
10 Press OK.
Choose a calling card to use
Note:If information for only one calling card is stored in your
phone, you are not required to choose a calling card.
1Press Menu 4 - 1 - 3 (Settings - Call settings - Calling card).
2Scroll until the name of the calling card appears, and press Options.
3Scroll to Select, and press OK.
4Enter your security code, and press OK.
The message Card ready for use appears.
Make a calling card call
Note:This procedure may not apply to all calling card options. For
more information, refer to your calling card or contact your calling
card company.
[ 49 ]
11
1At the Start screen, enter the phone number of the party you are calling.
Include any necessary prefix, such as 0 or 1, that is specified by your
calling card.
2Press and hold until the message Card call appears.
3When the message Wait for tone, then press OK appears, listen for
the tone from your calling card service, then press OK. When the
message Wait for tone, press OK again appears, listen for the tone,
then press OK.
• CHOOSE TO BLOCK CALLER ID
In most service areas, when you call someone, their caller ID system allows
them to see your name and phone number. Your phone is set to allow this
information to be seen automatically. Before you make a call, you can
choose to block caller ID and prevent the recipient from seeing your name
and phone number.
NOTES
• This feature works on a per-call basis, so you must perform this procedure
before each call where you want to block caller ID.
• While roaming, you may not be able to block caller ID.
• The following procedure assumes that you have stored the Send own
caller ID feature code in your phone and activated the feature. If you
have not completed these two steps, you may be able to block caller
ID manually. To block caller ID manually, enter the code (for example,
followed by the phone number that you’re calling,
then press .
1Press Menu 4 - 4 - 4 (Settings - Network services - Send own
caller ID with next call).
2Highlight Yes (to show your number) or No (not to show your number).
Press OK.
3Enter the number you are calling (or press Search to retrieve the number
from the phone book), and press OK. Press OK again.
11
[ 50 ]
Your phone makes the call and requests that the network block caller ID
to prevent the recipient of your call from seeing your name and phone
number.
• SELECT A PHONE NUMBER
You can use two different phone numbers with your phone. Each phone
number is used for a different service area.
• When activating your phone, the service provider sets up your phone
with account information (phone number and system information).
• However, your phone can be activated in up to two different service
areas. For example, your phone could be activated in Dallas and New
York. Each service area assigns a different phone number or account
to your phone.
You must select a phone number for your home system. If you travel outside
your home system, you can choose another number. Only one phone number
can be active at a time.
Note:You may not need two numbers for your phone if your
service provider has service or roaming agreements for each area
where you use your phone. Contact your service provider for
details.
Select the phone number
1Press Menu 4 - 4 - 6 (Settings - Network services - Own number
selection).
2Scroll to the phone number you will use, and press OK.
Note:The first phone number on this list is the currently selected
number. You need at least one active number to make calls. You
cannot change from one phone number to another during a call.
[ 51 ]
11
• SET TOUCH TONES
Touch tones are sounds produced when you press the phone keys. Sometimes,
touch tones are called DTMF tones.
You can use touch tones for many automated services such as checking
bank balances and airline schedules and using your voice mailbox. Touch
tones can be sent only when a call is active.
Set manual touch tones
1Press Menu 4 - 2 - 3 - 1 (Settings - Phone settings - Touch
tones - Manual touch tones).
2Select one of the following options, then press OK:
Set touch tone length
You can also set the length of each touch tone:
1Press Menu 4 - 2 - 3 - 2 (Settings - Phone settings - Touch
tones - Touch tone length).
2Scroll to Short (0.1 second) or Long (0.5 second).
3Press OK.
Store touch tone sequences (strings)
You store touch tone strings the same as you store names and numbers.
You can store a digit sequence to send as touch tones.
Continuous The tone sounds as long as you press and hold a key.
Fixed Sets the tone length to 0.1 second, regardless of
how long you press a key.
Off Turns off tones; no tone is sent when you press a
key.
11
[ 52 ]
STORE TOUCH TONE STRINGS WITH PHONE NUMBERS
1Enter the phone number that you want associated with a touch tone.
2Press w (wait) or p (pause) where needed.
w (wait): When you specify wait, your phone dials the number, then
waits (because you chose w) for you to press Send. When you press
Send, the phone sends your touch tone.
p (pause): If you include a p character, your phone pauses for 2.5
seconds, then automatically sends your touch tone.
3Enter the touch tone string.
4Store the number as you normally would.
SEND A TOUCH TONE STRING
1Press Menu 4 - 2 - 3 - 1 (Settings - Phone settings - Touch
tones - Manual touch tones).
2Verify that the setting is not set to Off. (If so, select a different option.
Press OK.)
3During your call, press Options. Scroll to Touch tones. Press OK.
4Enter or recall the touch tone string from the phone book. Press OK.
[ 53 ]
12
12) Customize your phone
• UNDERSTAND PROFILES
A profile is a “set of settings” you can use to
customize the way your phone works. You can set
your preferences for these items:
• Ringing options
• Ringing volume
•Ringing tone
• Vibrating alerts
• Warning game tones
• Message alert tone
Your phone comes with seven profiles:
•Normal (default setting)
• Silent
•Meeting
• Outdoor
•Pager
•Handsfree (available only when used with a handsfree device)
•Headset (available only when used with headset)
You can customize any of the profiles. If at any time you want to return
to the original settings, you can do so.
1
[ 54 ]
• SELECT A PROFILE
Quickly press Power Key . Scroll to highlight a profile. Press OK. (To
select a profile, your phone cannot be connected to a handsfree device,
and the screen must be displayed.)
• CUSTOMIZE A PROFILE
1Press Menu 3 (Profiles).
2Scroll to highlight a profile.
Note:The Handsfree and Headset profiles do not appear unless
your phone has been connected to these accessories. If you connect
your phone to a handsfree device, these profiles remain in the
menu, unless you choose to restore your phone’s factory settings.
3Press Options to view the options for the selected profile.
4Select one of the following options, then press OK.
Note:When you change a current profile setting, it affects only
that profile. Your phone’s normal settings do not change.
Set ringing options
You can choose the tone that notifies you of an incoming call. This setting
does not change the alert tone for when you receive a mobile message.
1Press Menu 3 (Profiles).
2Scroll to the profile where you want to set the ringing options, and
Select Activates the currently highlighted profile.
Customize Enables you to customize a profile by changing the
current settings. Press OK to choose from several lists.
Rename Enables you to rename the profile. This option is not
available for Normal, Headset, or Handsfree profiles.
[ 55 ]
12
press Options.
3Highlight Customize, and press OK.
4Scroll to Ringing options, and press Select.
5Scroll to highlight the desired ringing option, then press OK.
•Ring - This is the normal ring.
•Ascending - The ringing volume increases (gets louder) with each
ring.
•Ring once - The phone rings once (helps prevent disturbing others).
•Beep once - The phone beeps once (helps prevent disturbing
others).
•Silent - The phone makes no sound.
Set the ringing volume
You can set the default ringing volume for
incoming voice calls and message alert tones.
1Press Menu 3 (Profiles).
2Scroll to the profile where you want to set the
ringing volume. Press Options.
3Highlight Customize, and press OK.
4Scroll to Ringing volume, and press Select.
5Scroll through the options. When you hear the volume level you wish
to use, press OK.
Note:As you scroll through the ringing options, you can listen to
a sample of each. Although the sample for level 4 and level 5 are
the same, ringing level 5 produces very loud ringing.
The ringing volume setting is stored individually for the handsfree device
and the headset.
1
[ 56 ]
Set the ringing tone
You can set your phone’s ringing tone to a specific sound—or tune—for
incoming voice calls.
Note:If you have already chosen a ringing option of either Silent
or Beep once, the ringing tones are already turned off.
1Press Menu 3 (Profiles).
Your phone lists each profile.
2Scroll to the profile where you want to set the ringing tones.
3Press Options.
4Highlight Customize, and press OK.
5Scroll to Ringing tone, and press Select.
6Scroll to the ringing tone you want to use, and press OK.
Set a vibrating alert
You can set your phone to vibrate when you receive a voice call. This
feature is one of the settings in your phone’s profiles:
1Press Menu 3 (Profiles).
2Scroll to the profile to be set the vibrating alert. Press Options.
3Highlight Customize, and press OK.
4Scroll to Vibrating alert, and press Select.
5Scroll to On, and press OK.
The phone does not vibrate if it is connected to or in a charging device.
Set keypad tones
You can set the volume of the tone you hear when you press the keys on
your phone.
1Press Menu 3 (Profiles).
2Scroll to the profile for which you want to set the keypad tones.
Press Options.
[ 57 ]
12
3Scroll to Customize, and press OK.
4Scroll to Keypad tones, and press Select.
5Scroll to highlight the desired level (or Off), and press OK.
Set warning and game tones
You can set warning tones and game tones used in your phone:
Warning tones include the sounds for error conditions, confirmations, low
battery, and need to recharge. Game tones are the sounds made during
game play.
To turn warning tones on and off:
1Press Menu 3 (Profiles).
Your phone lists each profile.
2Scroll to the profile you want to change, and press Options.
3Scroll to Customize, and press OK.
4Scroll to Warning and game tones, then press Select.
5Scroll to On or Off and press OK.
Set the message alert tone
You can set your phone to use a certain tone to indicate an incoming text
message.
1Press Menu 3 (Profiles).
2Scroll to the profile for which you want to set the message alert tone.
Press Options.
3Highlight Customize, and press OK.
4Scroll to Message alert tone, and press Select.
5Scroll through your choices. The phone plays a sample of each choice
as you scroll to it.
6When you find the tone you want, press OK.
1
[ 58 ]
Set your phone to answer automatically
You can set your phone to answer incoming voice calls after one ring while
the phone is connected to an approved handsfree device.
Note:The Handsfree profile will not appear in your phone until you
have connected a handsfree device to your phone at least once.
1Press Menu 3 (Profiles).
2Scroll to the Handsfree or Headset profile, and press Options.
3Scroll to Customize, and press OK.
4Scroll to Automatic answer, and press Select.
5Scroll to On, and press OK.
Set the lights (handsfree device only)
While your phone is connected to a handsfree device, you can specify either
of two settings for the lights:
• Lights on only when you use the phone
• Lights on the entire time the phone is connected to the device
Note: This feature works only when your phone is connected to a
handsfree device.
1Press Menu 3 (Profiles).
2Scroll to Handsfree profile, then press Options.
3Highlight Customize, and press OK.
4Scroll to Lights, and press Select.
5Scroll to Automatic or On, and press OK.
•Automatic - If no keys are pressed, the lights go off after 30
seconds.
•On - The lights stay on the entire time that your phone is connected
to the handsfree device.
[ 59 ]
12
• RENAME PROFILES
Note:You cannot rename the Normal and Headset profiles.
1Press Menu 3 (Profiles).
2Scroll to the desired profile, and press Options.
3Scroll to Rename, and press OK.
4Enter the new name, and press OK.
• RESTORE FACTORY SETTINGS
You can change the default (factory) settings for your phone. Later, you
can restore the original settings when needed.
Note:The memory, timers, language selection, security code, and
lock codes are not reset. However, any profiles you modified are
reset when you restore your settings.
1Press Menu 4 - 2 - 4 (Settings - Phone settings - Restore factory
settings).
2Enter your security code, and press OK.
• CHOOSE A DISPLAY LANGUAGE
You can choose which language is displayed on
your phone.
1Press Menu 4 - 2 - 5 (Settings - Phone
Settings - Language).
2Select the language to use, and press OK.
1
[ 60 ]
• SET AND DISPLAY THE CLOCK
Your phone contains a real-time clock that can be
set two different ways:
• To use the time and date provided by the
wireless system
• To be set manually
You can display the time and date on the Start screen as described in “Set
the alarm clock” on page 105.
Choose the format of the displayed time
You can choose to display the clock in 24-hour or am/pm format.
1Press Menu 4 - 2 - 1 (Settings - Phone settings - Clock).
2Scroll to Time format, and press Select.
3Scroll to the desired time format (24-hour or am/pm). Press OK.
Note:For am/pm format, a small square appears to the right of the
displayed time. Square at top = am, square at bottom = pm.
Allow the network to set the clock
1Press Menu 4 - 2 - 1 (Settings - Phone settings - Clock).
2Scroll to Time settings, and press Select.
3Scroll to Set by network, and press Select.
NOTES
• If you are outside your network and allow the network to set the clock,
you will be prompted to set the clock manually. When you re-enter
your network, the network automatically sets the date and time.
• If you are outside your network and you remove the battery (or battery
becomes discharged), you will be prompted to set the clock manually
when you install or recharge the battery.
[ 61 ]
12
Manually set the clock
By default, the clock is automatically set by the wireless network. You can
override the network and set the clock manually.
1Press Menu 4 - 2 - 1 (Settings - Phone settings - Clock).
2Scroll to Time settings, and press Select.
3Scroll to Set clock, and press Select.
4Enter the current time.
For example, to enter 7:30, enter 0730. Press OK.
5Scroll to am or pm, and press OK.
Display or hide the clock
1Press Menu 4 - 2 - 1 (Settings - Phone settings - Clock).
Depending on the current setting, either Hide time/day or Show
time/day will be highlighted.
2Press Select.
• ADD A WELCOME NOTE
You can set your phone to display a welcome note each time you switch on
your phone. This note could say, for example: Hello. It could include your
name, a reminder, or more. The maximum length of this note is 36 characters.
1Press Menu 0 - 1 - 3 (Messages - Welcome note).
2Enter the text of the welcome note.
Characters you enter are added to the left of the cursor.
• To delete characters to the left of the cursor, press Clear.
• To move the cursor, press or .
3Press Options.
4Scroll to Save, and press OK.
To delete (erase) the welcome note, press Menu 0 - 1 - 3
(Options - Erase - OK).
1
[ 62 ]
USE ONE-TOUCH DIALING
You must store names and numbers before using one-touch dialing. You
can assign a name from the phone book to one-touch dialing, using keys
2 through 8. When you press the key, the number is automatically dialed.
•Keys 1 and 9: The 1 key is used exclusively to dial your voice mailbox.
The 9 key is used exclusively to make calls to the emergency number
that is programmed into your phone.
•Key 2: Some service providers designate this key to dial a customer
care operator. Your service provider can tell you if this service is
available to you. You can assign a one-touch dial location to the 2
key.
Assign a name or number to a one-touch dial key
1Press Names and scroll to one-touch dialing.
2Press Select.
3Scroll to a number that has the message (empty), and press Assign.
4Scroll to the name and number to which you want to assign this key.
Press Select. Repeat these steps as many times as necessary.
To call a number using one-touch dialing, press and hold the
appropriate key for a few seconds. The phone dials the number.
Change one-touch dialing numbers
After you have assigned a one-touch dialing number to a key, you can
change key and number associations at any time.
1Press Names.
2Scroll to one-touch dialing, and press Select.
3Scroll to the key you want to change, and press Options.
4Scroll to Change, and press Select.
5Scroll through the phone book.
6When you reach the new number, press Select.
[ 63 ]
12
Erase one-touch dialing numbers
You can erase one-touch dialing key assignments at any time.
1Press Names.
2Scroll to one-touch dialing, and press Select.
3Scroll to the key you want to erase, and press Options.
4Scroll to Erase, and press Select.
5Press OK.
• USE EMERGENCY KEY 9
The emergency key 9 feature allows you to dial the official emergency number
quickly (for example, 911) that is programmed into your phone. Before you
can use this feature, you must activate it.
NOTES
• Depending on your service provider, it may not be possible to use the
emergency key 9 feature to make an emergency call if: the feature
has not been activated; Keyguard is active (see “Activate keyguard” on
page 68 .); your phone is locked (see “Lock and unlock your phone”
on page 67.); or you set up a call restriction that will not allow the call
(see “Restrict outgoing calls” on page 70.).
• Depending on your service provider, you may be able to make an
emergency call manually by entering the emergency number at the
screen and then pressing , regardless of your phone settings.
• For more safety information about making emergency calls, see
“Emergency calls” on page 114.
Activate or deactivate emergency key 9
1Press Menu 4 - 1 - 1 (Settings - Call settings - Emergency key 9).
2Scroll to On (activate) or Off (deactivate). Press OK.
1
[ 64 ]
Make an emergency call
There are two ways to use the emergency key 9 feature to make an
emergency call:
•Press , then .
• Press and hold until the phone indicates it is attempting to
make an emergency call.
When you make an emergency call, your phone changes to emergency call
mode. If you exit this mode, emergency operators may not be able to
contact you. Keep your phone in emergency call mode until emergency
personnel arrive on the scene.
In emergency call mode, some menu items may not be available. To exit
emergency call mode, at the Start screen, press Exit. When the question
Restore normal service? appears, press OK.
• IDENTIFY CALLERS BY CUSTOM RINGING TONES
You can assign a ringing tone to an entry in your phone book, allowing you
to identify the caller by the tone you hear when they call.
To use this feature, you must subscribe to the Caller ID service that is
available from your service provider.
If a caller blocks Caller ID, your phone will use the Normal ringing tone
instead of the custom tone. If the ringing option for the current profile is
set to Silent, your phone will not ring with a normal tone or a custom tone.
Fifty of the entries in your phone book can have a custom tone assigned
to them. Assign these custom tones with this procedure:
1In your phone book, find the entry where you will assign the custom
ringing tone.
2Press Details, then Options (or, if the scrolling view for your phone
book is set to Name+number, just press Options).
3Scroll to Custom tone, and press Select.
4Scroll through the ringing tones list until the desired tone is highlighted.
[ 65 ]
12
• If you wait a moment while a tone is highlighted, your phone will
play the tone.
• To remove assignment of the custom tone from the entry, select
Default.
5Press OK.
• PRESS ANY KEY TO ANSWER A CALL
1This feature allows you to answer an incoming call by pressing any
key except the End key or the Power key . The default
setting for this feature is On. To enable or disable Anykey answer,
press Menu 4-1-4.
1
[ 66 ]
13) Security
A security code, a phone lock feature, and a call restriction feature prevent
unauthorized use of your phone. A keypad lock prevents unintended key
presses, such as when your phone is in your purse or pocket.
• CHANGE YOUR SECURITY CODE
Important:
The default security code is 12345. Nokia highly recommends that you
immediately change this code, write down the new code, and store it in a
safe place, away from your phone. You cannot activate or use certain phone
features until you successfully enter your security code.
When you enter your security code, an asterisk (*) appears on the screen
each time you press a number key, preventing others from seeing your
code. If you enter the wrong code five times in a row, your phone won’t
accept any entries for the next 5 minutes.
1Press Menu 4 - 3 - 2 - 4 (Settings - Security settings - Access
codes - Change security code).
2Enter the security code. (The default code is 12345.) Press OK.
3Enter the new code. To prevent accidental emergency calls, don’t enter
a code that is similar to an emergency number. Press OK.
4To verify your new security code, enter it again. Press OK. The
message Security code changed appears. Store your new code in a
safe place, away from your phone.
• PROTECT YOUR PHONE WITH PHONE LOCK
You can lock your phone to prevent others from using it. When someone
tries to use it, they will be required to enter a lock code.
Tip:If you save an unlocked phone number, you can make calls to
that number without entering the lock code.
[ 67 ]
13
Important:
The default lock code is
1234
(or the last four digits of
your phone number, depending on your service provider). Nokia highly
recommends that you immediately change this code, write down the
new code, and store it in a safe place, away from your phone.
When you enter your lock code, an asterisk (*) appears on the screen each
time you press a number key, preventing others from seeing your code. If
you enter the wrong code five times in a row, your phone will prompt you
for the security code.
Lock and unlock your phone
1Press Menu 4 - 3 - 2 - 1 (Settings - Security settings - Access
codes - Phone lock).
2Enter the lock code, and press OK.
3Scroll to On (lock) or Off (unlock). Press OK. If you choose to lock your
phone, it will be locked when you switch it off. When you turn it back
on, you must enter the lock code before you can use the phone.
Note:When your phone is locked, it may not be possible to make an
emergency call. (See “Make an emergency call” on page 64.)
Store an unlocked phone number
If you store an unlocked phone number, you can make calls to that number
without entering the lock code.
1Press Menu 4 - 3 - 2 - 2 (Settings - Security settings - Access
codes - Unlocked phone number).
2Enter the lock code. Press OK. The Number field appears.
3Enter a phone number (or press Search to find the number).
4Press Options.
5Scroll to Save, then press OK.
1
[ 68 ]
Call an unlocked phone number
• Press or once, then , OR...
• At the Start screen, enter the phone number. Press .
Answer a call while the phone is locked
Press any key except or .
Change your lock code
1Press Menu 4 - 3 - 2 - 3 (Settings - Security settings - Access
codes - Change lock code).
The message Enter lock code appears.
2Enter the lock code. (The default lock code is 1234, or the last four digits
of your phone number, depending on your service provider.) Press OK.
3Enter the new lock code. Only numeric characters are accepted. To
prevent accidental emergency calls, don’t enter a code that is similar
to an emergency number.
4Press OK.
5Verify the new lock code, and press OK. Store your new code in a safe
place, away from your phone.
• USE KEYGUARD TO LOCK THE KEYPAD
The Keyguard feature lets you lock the keypad to prevent accidental key
presses while your phone is in a pocket or purse. If you press a key while
Keyguard is activated, a message appears: Press Unlock and then *.
Activate keyguard
• Press and hold until Keys locked appears. (If you do this
during a call, the call will end.), OR...
• At the Start screen, press Menu , OR...
• At the Start screen, press Menu 1 - 0, OR...
• At the Start screen, press Menu. Scroll to Keyguard, and press Select.
[ 69 ]
13
Deactivate keyguard
•Press Unlock., then , OR...
• Press and hold until Unlock keys? appears. Press OK.
Answer a call while keyguard is active
•Press , OR...
• If Anykey answer is set to On, press any key except or .
(During an incoming call, Keyguard is automatically deactivated.
When you end the call, Keyguard is automatically activated again.)
NOTES ABOUT KEYGUARD
• While Keyguard is active, depending on your service provider, it might
not be possible to use the Emergency key 9 feature to make an
emergency call. However, it may be possible to make the call by
manually entering the number and then pressing . While
entering the number, none of the characters will appear on the screen
until you enter the last one.
• When you connect your phone to a handsfree device other than a
headset, keyguard is automatically deactivated. When disconnected
from the device, it is automatically activated.
• Before you turn off your phone, you must deactivate Keyguard.
• While Keyguard is active, press the Power key to switch the lights
on quickly for 30 seconds.
• RESTRICT CALLS
You can restrict incoming and outgoing calls. To restrict outgoing calls, you
create a list of restrictions and apply the appropriate restriction.
For outgoing calls, only one restriction option is available:
Add restriction, which enables you to create your own list of outgoing call
restrictions. The maximum number of call restrictions you can define is ten.
1
[ 70 ]
After you have used the Add restriction option to add at least one
restriction, the following options are then available:
•Select: Allows you to set call restrictions from the outgoing calls list.
•Edit: Allows you to edit an existing outgoing call restriction.
•Erase: Erases any existing outgoing call restrictions.
The All calls option cannot be erased; therefore, this option does not appear
in the list of restrictions to be deleted.
Depending on the type of restriction, you may not be able to use the
emergency key 9 feature to make an emergency call. However, you may
be able to make the call manually by entering the emergency number and
then pressing .
Restrict outgoing calls
1Press Menu 4 - 3 - 1 (Settings - Security settings - Restrict calls).
2Press Select.
3Enter your security code, and press OK.
4Scroll to Add restriction, and press OK.
5Enter the number you want to restrict, and press OK.
For example: If you want to restrict all calls that begin with 1, enter 1.
This will restrict all outgoing long distance phone calls. If you want to
restrict all calls that begin with 972, enter 972, and so forth.
After you perform step 5, the Name field appears.
• If you want to add a name for the call restriction, enter the name
using your phone’s keypad. Press OK.
• If you don’t want to add a name, simply press OK.
[ 71 ]
13
Restrict incoming calls
To restrict incoming calls:
1Press Menu 4 - 3 - 1 (Settings - Security settings - Restrict calls).
2Scroll to Restrict incoming calls, and press Select.
3Enter your security code, and press OK.
4Scroll to All calls, and press Mark.
Press Unmark to remove an already-set restriction.
5Press Back.
The Save changes? message appears.
6Press Yes.
Press No if you do not want to save the changes.
1
[ 72 ]
14) Select System
The System menu (Menu 5) allows you to customize the way your phone
chooses a system in which to operate while you are “roaming” (using your
phone outside your primary or “home” system). Your choice of a system
affects the type and amount of charges you incur. By default, your phone
is set to automatically search for the most cost-effective system while
roaming. If your phone can’t find a preferred system, it uses a system based
on the option you choose in the System menu.
Note:Before selecting an item in the System menu, contact your
service provider to find out how your selection will affect your
service charges.
Roaming
Roaming occurs when you use your phone outside its home area. While
roaming, another service provider’s system handles your call, so the service
rate for the call is usually higher than the rate for calls made within your
home area. While roaming, the word Roaming and the roaming indicator
( ) appear on the Start screen.
Note: In some systems, you may need to have a roaming agreement to
place a call. If no roaming agreement has been arranged, a network
operator may interrupt and request information on how you intend to pay
for the call.
Service types
In each wireless service area there are usually two service providers, referred
to as type A and type B. When you first set up your wireless service account,
your service provider will inform you of which system you will be using
(usually type B). This is your home system. The other system (for example,
type A) is known as a non-home-type system.
[ 73 ]
14
System choices
If you have more than one phone number (NAM), your choice affects only
the currently selected number. Select Menu 5 and select from the following
choices.
Note:System choices may differ, depending on service provider.
•Home area: Your phone cannot roam. This means you can make
and receive calls in your home area only. While roaming, No
Service appears and you will not be able to make or receive calls.
•Automatic A: Your phone searches for system A.
•Automatic B: For most service providers, this is the default selection.
Your phone searches for system B.
1
[ 74 ]
15) Send and receive mobile
messages
When you have mobile (text) messaging service, you can receive messages
on the screen and send messages to e-mail addresses and phone numbers.
Note:Before you send or receive mobile messages, you may need
to subscribe to the messaging service offered by your service
provider. Some networks may not support mobile messaging.
The message types vary by service provider. Your phone automatically creates
the types of messages supported by your service provider:
•Text: A text message can include text and a call-back number.
•Number only: A number-only message is like a numeric page. A call-
back number (the sender’s phone number) appears on the recipient’s
pager or phone screen.
A message contains both a header and the body. The header may have the
sender’s phone number or e-mail address and the date and time of the
message. If you have a phone book entry that matches the sender’s phone
number, the sender’s name also appears. The body contains the main part
of the message. If you receive a message sent by e-mail, the subject (title)
may appear at the beginning of the message body.
• ABOUT WRITING MESSAGES
Traditional or Predictive Input
You can write text messages with standard input or predictive text input.
•Traditional (multitap) input method: This is the default mode. This
method requires that you press some keys more than once (multitap).
For example, to enter the letter c, you must press three times.
See “Enter characters (except in a phone number field)” on page 29.
[ 75 ]
15
•Predictive text input method: In the predictive text mode, your phone
“guesses” which word you are entering. This mode requires that you
press a key only once for each letter you enter.
Note:To learn more about using Predictive Text when creating
messages, see “Working with predictive text input”
Write a new message
1Press Menu 0 - 1 - 1 - 1 (Messages - Text messages - Write new).
If Text and Number only appear in a list of menu items, scroll to Text,
press Select, and go to the next step.
If these items are not on your menu, proceed to the next step.
2You may address your message or write it first and address it later.
• To address your message, scroll to Add e-mail or Add number,
then press Select.
• To begin writing your message, scroll to Edit message, then press
Select. The terms writing and editing refer to the process of
entering text into a text message.
After you have written your message, you can:
• Address and send it.
• Save the message in the Outbox and address and send it later.
(Press Options, scroll to Save, then press Select).
Enter text into a message
A counter in the top right corner of the screen indicates the number of
remaining characters that you can enter into your message.
Caution:While editing a message, if you accidentally press and hold
Clear, all text within your message will be deleted.
To exit the message editor at any time without saving your text, press
Options, scroll to Exit, then press Select.
1
[ 76 ]
Change the text input method
To switch (toggle) between predictive and traditional text input modes
while you are editing a message, press the Pound key several times
until the icon indicates the mode you want to use. You must activate
predictive text before you will be able to toggle between the two modes.
Tip:If you don’t want to use predictive text input mode at all,
deactivate it. You can reactivate it later.
• WORKING WITH PREDICTIVE TEXT INPUT
The predictive text feature is based on a built-in dictionary to which you
can add words. Your phone includes several different language versions of
this dictionary. Although your phone can display a given language on the
screen, it may not have a predictive-text dictionary of that same language.
By default, your phone is set in the traditional text input mode. Before you
can use the predictive text input method, you must first activate the
predictive text mode.
Activate predictive text mode
Predictive text mode is active when the predictive text icon ( ) is
present at the top of the screen. If the icon does not appear, predictive
text mode has been deactivated.
1. , @ ’ ? ! -1 7PQRS7
2ABC28 TUV8
3DEF3 9WXYZ9
4GHI40 Enters an empty space or 0
5JKL5 *Special characters
6 MNO6 # Changes letter case; long press toggles
between ABC/abc & 123 mode
[ 77 ]
15
To activate the predictive text mode while editing a message:
1Press Options.
2Scroll to Predictive text.
3Press Select.
4Scroll until the language you want appears, then press OK.
Deactivate predictive text mode
To return to the traditional text input mode, you must deactivate the
predictive text input mode:
1While editing a message, press Options.
2Scroll to Predictive text. The language list displays.
3On the language list, scroll to Prediction off and press OK. Your
phone is now in traditional (multitap) mode.
4You can also use multitap on the pound key (#) to go to traditional
text in a message.
Add words to the dictionary
1If the ? character appears after the word, press Spell, or at any time
while you are editing, press Options, scroll to Insert word, then press
Select.
2Enter the word using traditional text input, and press OK. If the
dictionary is full, the new word replaces the oldest added word.
Change the dictionary language
You can change the dictionary language while you are editing a message:
1While editing a message, press Options.
2Scroll to Predictive text, then press Select.
3Scroll to a language, then press OK. The selected language is active.
1
[ 78 ]
• WRITE WITH PREDICTIVE TEXT INPUT
Enter words
1Press each key only once for each letter of the word. For example, to
write hello, press 4 - 3 - 5 - 5 - 6. The characters that you enter appear
underlined. The word changes after each keystroke, so only check the
word after you press all the appropriate keys.
2When you finish the word, check to make sure that the word is correct.
3If the word is correct, enter a space (press the 0 key) and write
the next word.
4If the word is incorrect and is underlined, press the Star key ( )
repeatedly until the desired word appears. OR, press Options, scroll to
Matches, then press Select. Your phone shows a list of words. Choose
a word from the list, then press Use, or press Back to exit and return
to the message editor.
5If the ? character appears after the word, there are no more words in
the dictionary that correspond to your key presses. At this point, you
can add the word to the dictionary by pressing Spell.
Writing compound words
To write a compound word quickly (for example, bluejay):
1Write the first part of the word (blue).
2Press (do not enter a space). The underline disappears from the
first part.
3Write the second part of the word (jay).
Deleting characters
When you need to delete characters use one of these methods:
• To delete one character to the left of the cursor, press Clear.
• To delete all characters in the message, press and hold Clear.
[ 79 ]
15
Changing letter case modes
You can switch (toggle) between uppercase and lowercase
letter mode by pressing the Pound key .
If the predictive text mode is active and you don’t wait at least 1.5
seconds between key presses, the text input mode will also be switched
between traditional and predictive text.
If predictive text mode is active when you create a new message, the first
letter of the first word that you enter will be uppercase.
Entering numbers
When you enter numbers, use either of these methods:
• For one or a few numbers, press and hold the respective number key.
• For many numbers, change to number entry mode (press and hold
the Pound key ) and enter the numbers as usual.
Inserting special characters
• To insert a special character (such as a punctuation mark), press and
hold the Star key , or press Options, scroll to Insert symbol,
then press Select.
• To insert a period (.) quickly, press . To insert double hyphens (-
-) quickly or three dots (an ellipsis...), press a few times.
Templates
Note:Templates are available in English only.
A template is a predefined, commonly used sentence that you can quickly
insert into a message:
1While you are editing a message, press Options.
2Scroll to Add template, then press Select.
3Scroll to the template you want to use. For example:
1. Call me at [ ]. <phone number/time/place-
2. I’ll call you at [ ]. <time/place-
1
[ 80 ]
Brackets ([ ]) in a template represent a value that you can specify. The
value is not retained for future use; you enter the value each time you use
the template. If you select a template that contains brackets, you will be
prompted to enter a value. You can edit the template text after you insert
it into your message.
• RECEIVE A MOBILE MESSAGE
When you receive a mobile message, the mobile message icon
appears and Message received (or New emergency message) displays.
If you have a message alert tone set, a tone may sound.
When you receive notification, you can:
1Press Clear to dismiss the notification and read the message later
from your Inbox.
OR
Press Read to read the message now.
The Inbox opens with the new message selected.
If No space: message waiting or a similar message appears, your
phone’s memory is full. You must make room for the message. Press
Read again.
If necessary, scroll to read the entire message.
2At the end of the message, scroll further to view the sender’s name or
phone number and the date and time the message was received.
When you’ve seen the last new message, the icon disappears.
• MESSAGE OPTIONS
While reading a message, you have several options. Some of these options
may not be available for some types of messages:
Erase deletes the message. Press OK to confirm the deletion or Clear to
cancel.
[ 81 ]
15
Reply allows you to send a return message to the sender.
Save sends the message to the Saved folder.
Use number allows you to call quickly or save a phone number included
in the message. If more than one number was included, a list of numbers
displays.
To save the number:
a) Read the message and scroll until the number you want to save
is visible.
b) Press Options, scroll to Use number, and press Select.
If one phone number appears on the screen, press Call (or press ,
then Save).
If a list of numbers appears, scroll to a number, press OK, then press Call
(or press , then Save).
Save address extracts one or more e-mail addresses from the message (if
it contains any) and allows you to save the addresses in your phone book.
Forward allows you to send the message to another recipient. For more
information about forwarding a message, see “Forward a message” on
page 87 .
Reply w/ copy allows you to send a message back to the sender. Your
message will include a copy of the message you received.
• MESSAGE STORAGE
Your phone can store about 80 messages. All folders share the memory, so
the actual number of stored messages depends on the message length.
Three folders store your messages:
•Inbox: All messages that you received and have not erased or saved.
•Outbox: Messages that you sent or created and saved to send later.
•Saved: Messages that you saved from the Inbox or Outbox.
If the memory is full when you receive a mobile message:
1
[ 82 ]
• Non-emergency Message: The oldest sent message in the Outbox
folder is deleted. Drafts or unsent messages are not deleted. If there
are no sent messages in the Outbox folder, the oldest read message
in the Inbox folder is deleted. If there are no read messages in the
Inbox, No space: message waiting or a similar message appears. This
message prompts you to delete messages from one of the folders. The
network resends the message later.
• Emergency Message: An emergency message, sent only by a network
operator, follows the procedure for a nonemergency message and adds
an additional safeguard. For the emergency message, other messages
in the Inbox, Outbox, and Saved folders may also be automatically
deleted if your phone’s memory is full.
• CREATE A TEXT MESSAGE
Address a text message
Use this procedure to address your message to one or more recipients:
1You must be editing the message that you want to address:
•If you are in Edit message, press Options, then go to the next step.
•If you are not in Edit message (for example, you wrote the
text message and saved it to send later), open the Outbox
(Menu 0 - 1 - 1 - 3). Scroll to the message you want to address.
Press Options. Scroll to Resend. Press Select. Go to the next step.
2Scroll to Add e-mail (to add an e-mail address) or Add number
(to add a phone number), then press Select.
3Enter the e-mail address or phone number, then press OK.
Notes about addresses
• You can address a text message to as many as 10 e-mail addresses, phone
numbers, or a combination of both. To see a list of all recipients to whom
your message is addressed, scroll to List recipients, then press Select.
• The maximum number of characters allowed in a phone number is 32.
[ 83 ]
15
The maximum number of characters allowed in an mail address is 48.
• While entering a phone number or e-mail address, press and release
Clear to delete one character, or press and hold Clear to delete all
characters.
• If a recipient’s e-mail address or phone number is in your phone book,
you can quickly enter it by searching for the recipient’s name. To search,
press Search. To jump to an entry in your phone book quickly, press the
appropriate key. For example, if the entry is John (j), press . To
jump to Kim (k), press twice. If an e-mail address or phone
number is not associated with the entry that you select, a message will
appear: No e-mail address found or No numbers found.
• When entering an e-mail address manually, you can quickly enter the
@ symbol by pressing repeatedly until the @ symbol appears.
Note:To address a number-only message, see “Send a number-
only message” later in this section.
• SEND A MESSAGE
This procedure assumes that you have addressed your text message and
entered some text into it (or have entered a callback number). Before you
send your message, you can select one or more options. While you’re editing
the message, press Options, scroll to Settings, then press Select. To select
an option, Mark it. To deselect an option, Unmark it.
•Urgent: Sets the priority level of your message to “urgent”. Urgent
message or a similar notification will appear on the screen of the
recipient’s phone or other device.
•Delivery note: When the recipient receives your message, the network
will send you a delivery note. If you address the message to more than
one recipient, you will receive a separate delivery note for each recipient.
•Callback no.: Allows you to enter a phone number at which the
recipient can call you.
1
[ 84 ]
After you mark and unmark the options, press Back. The message Save
changes? appears. To accept the changes that you made to the settings,
press Yes. To discard the changes, press No.
To send the message, press Options, scroll to Send, then press Select.
If the network can’t send your message, a warning note should appear.
Try to resend the message later.
Message delivery notification
When you send a message, you can ask to be notified when the message
is received. This notification is called a delivery note. When the recipient
gets your message, the network sends you a delivery note. You will receive
a separate delivery note for each recipient.
Urgent mobile messages
You can assign an urgent priority level to a mobile message. When you
receive an urgent mobile message, Urgent appears in the message header.
When you send an urgent mobile message, a similar notification appears
on the recipient’s phone or other device if it supports this feature.
There are four ways to create a text message:
• Write a new, blank message
• Reply to a received message
• Resend a message
• Forward a message
Send a number-only message
To create a text message, see “Create a text message” on page 82. For
information about types of messages, see “Send and receive e-mail
messages” on page 88.
Press Menu 0 - 1 - 1 - 1 (Messages - Text messages - Write new).
Note:If Text and Number only appear in a list of menu items,
scroll to Number only, then press Select.
[ 85 ]
15
Use the following guidelines when addressing your message and specifying
a callback number:
•Use Add number to specify a recipient’s phone number. The maximum
number of characters allowed in a phone number is 32.
• When prompted to enter a recipient’s phone number, you can manually
enter it or search for it.
• When searching, the list of entries in your phone book is displayed.
To jump to an entry quickly, press the appropriate key. For example, if
the entry is John (j), press . To jump to Kim (k), press twice.
• You can address your message to as many as 10 recipients. You can
see a list of recipients who will receive your message (List recipients).
• You can create a message, save it in your Outbox, then address it and
send it later (Save).
The callback number (Callback no.) is the phone number at which you want
the recipient to call you. When prompted to enter a callback number, the
default callback number (your mobile phone number) may appear in the
field. You can use this number or enter a different number.
Resend a message
1Open your Outbox (Menu 0 - 1 - 1 - 3). Scroll until the message you
want to resend is highlighted.
2Press Options. Scroll to Resend. Press Select.
• Before you resend your message, you can edit it. You can also edit
the recipients list (Add e-mail, Add number, or List recipients).
•Settings (Urgency, Delivery note, and Callback no.) for the
message are kept unless you edit them (Options - Settings).
3To send the message, press Options, scroll to Send, then press Select.
1
[ 86 ]
• ERASE MESSAGES
You can erase the message you’re reading or several messages at once.
Erase the current message
Press Options, scroll to Erase, then press Select.
Erase multiple messages
1Press Menu 0 - 1 - 1 - 5 (Messages - Text messages - Erase).
2Scroll until the message is highlighted, then press Select. Depending
on your service provider, you may be need to confirm your choice or
enter your security code to prevent accidental deletion of messages.
•All read: Erases all read messages in the Inbox (unread messages
are not erased); erases all messages in the Outbox and Saved
folders (these folders cannot contain unread messages).
•All in inbox: Erases all messages (read or unread) in the Inbox.
•All in outbox: Erases all messages (sent or unsent) in the Outbox.
•All saved: Erases all messages in the Saved folder.
• REPLY TO A MESSAGE
1Read the message to which you want to reply.
• If you just received the message and the Start screen is currently
displayed, press Read.
• If the message is in the Inbox folder, press Menu 0 - 1 - 1 - 2.
• If the message is in the Saved folder, press Menu 0 - 1 - 1 - 4.
2Scroll to the message, press Read, and then press Options.
3Scroll to Reply (or Reply w/ copy if you want to include a copy of the
original message in your reply).
If you reply with copy, your message could be long. In some networks,
a long message is shortened and the recipient may not see all of it.
[ 87 ]
15
4Press Select.
After you write your message, you can:
• Address and send it.
• Save the message in the Outbox, and address and send it later
(Press Options, scroll to Save, then press Select).
• FORWARD A MESSAGE
1In the Inbox or Saved folder, read the message that you want to
forward.
2Press Options, scroll to Forward, then press Select.
3Prepare your message as you would any other message that you create.
• If the message you are forwarding is a text message, you can edit
the message before you send it.
• If your phone is configured to be able to send a number-only
message, you can forward a callback number as a number-only
message, provided the original message was also a number-only
message.
4After you prepare your message, you can:
• Address it, then send it.
• Save it to the Outbox (press Options, scroll to Save, then press
Select), then address it and send it later.
1
[ 88 ]
16) Send and receive e-mail
messages
You can use your phone to send and receive e-mail messages. You no longer
need to be at your computer to send or receive messages. The e-mail feature
is not available from all service providers.
• SAVE E-MAIL ADDRESSES
You can add an e-mail address to a name you’ve already saved in the phone
book. You can also add a name and address as a new entry.
Save an e-mail address for an existing name
1At the Start screen, press Names, then at Search, press Select.
The Names box opens.
2Enter the first two letters of the name you want to find. Press OK.
3Press Options (or press Details if the Name list view is selected in your
phone book), and scroll to E-mail address. Press Select.
The e-mail address box opens.
4Enter the address.
Press once for a dot (.). Press repeatedly until the @
appears. Press OK when you see the correct character.
5When you finish entering the address, press OK.
The message Saved appears briefly, confirming your action.
Add a new e-mail address
1At the Start screen, press Names. Scroll to Add new. Press Select.
The Names box opens.
2Enter the name. Press OK.
[ 89 ]
16
The Number box opens.
3Enter the phone number. Press OK.
The message Saved appears briefly, confirming your action.
4Press Options, scroll to E-mail address. Press Select.
The e-mail address box opens.
5Enter the address. Insert special characters such as the “dot” and @
signs by pressing .
6Press OK.
The message Saved appears briefly, confirming your action.
Edit an e-mail address
1At the Start screen, press Names, then at Search, press Select.
The Names box opens.
2Enter the first two letters of the name you want to find. Press OK.
3Press Options (or press Details if the Name list view is selected in your
phone book), and scroll to E-mail address. Press Select.
The e-mail address box opens.
4Enter any changes, using the scroll keys to move the insertion point
backward and forward in the address.
5When the address is correct, press OK.
The message Saved appears briefly, confirming your action.
• SEND AN E-MAIL MESSAGE
1At the Start screen, press Menu and then, at Messages, press Select.
At Text messages, press Select. Scroll to Write e-mail. Press Select.
The e-mail address box opens.
If your phone asks for an e-mail gateway number, see your service
provider.
1
[ 90 ]
2Enter the e-mail address, or press Search.
•If you press Search, enter the first few letters of the name you want.
Press OK when you find the name. The address appears in the
Recipient address box. Press OK.
• The phone lists all the names from your phone book. If you select
a name for which there is no e-mail address, your phone displays
the message, No e-mail address for this name.
• If you enter the e-mail address, press OK when you’ve finished.
The Subject box opens.
3Enter a subject. Press OK.
The subject line can hold a maximum of 26 characters. You can leave
the line blank if you wish.
4When the message screen appears, enter your message.
Note:The maximum number of characters for message length
varies; check with your service provider for details.
You can turn on predictive text input if you wish. For information, see
“Working with predictive text input” on page 76.
5When you finish the message, press Options, select Send. Press OK.
A status message tells you the mail is being sent.
Other options for a completed message
Save Saves the message in the saved folder until you send it.
Erase Erases the message and returns you to the Recipient
address box.
Quit Erases the message and returns you to the Start screen.
[ 91 ]
16
• REPLY TO OR FORWARD AN E-MAIL MESSAGE
1If the message is not on the screen, press Menu, Message, Text
messages and Inbox (Menu 0 - 1 - 1 - 1).
2Select the message you received. Press Read.
3Press Options. Scroll to Forward or Reply. Press OK.
4Scroll to As e-mail. Press Select.
If the phone needs an e-mail gateway number, see your provider.
5Enter the recipient’s e-mail address or press Search to find the name.
•If you press Search, enter the first few letters of the name you want.
Press OK when you find the name. The address appears in the
Recipient address box. Press OK.
• The phone lists all the names from your phone book. If you select
a name for which there is no e-mail address, your phone displays
the message, No e-mail address for this name.
• If you enter the e-mail address, press OK when you’ve finished.
6Enter a subject line. Press OK. The subject line holds up to 26 characters.
You can leave it blank.
7When the message box opens, write your reply or message you want
to add when you forward the mail. You can use predictive text input.
8When you’ve finished your message, press Options. Scroll to Send.
Press OK.
1
[ 92 ]
17) Minibrowser
Note:This feature is available only if your service provider’s
network supports wireless internet access. Your service provider
may also require that you subscribe to this additional service. For
more information, contact your service provider.
• ABOUT THE MINIBROWSER
Warning: Your phone must be switched on to use the
Minibrowser. Do not switch on the phone when wireless phone use
is prohibited. See “For your safety” on page 9.
Warning: Emergency Key 9 is disabled while you are in a
Minibrowser session.
The Minibrowser lets you browse the internet for information such as stock
quotes and weather. Browsing via the phone is not like browsing using a
PC. Site providers usually present only the critical aspects of their site to
wireless phone users, so they have removed most graphics.
When you start the Minibrowser and connect to a network, two icons appear
on the screen:
• Minibrowser icon (you are in a Minibrowser session)
• Active call icon (you are being billed accordingly)
After a certain period of inactivity, the Minibrowser disconnects from the
network. For this reason, you may find that you are billed for several network
connections within a single session. This is normal and is designed to
minimize your bill. Rates will vary according to your billing plan.
When the Minibrowser disconnects from the network, the active call icon
( ) disappears, but the Minibrowser icon ( ) remains. While you are
in the Minibrowser you can still access pages stored in memory without
[ 93 ]
17
being connected to the Internet. However, if you navigate to a page that
is not stored in memory, a new Minibrowser session begins and you’ll be
billed accordingly.
• LAUNCHING THE MINIBROWSER
The first time you launch the Minibrowser, you go through a security
setup process that takes 3 to 5 minutes (follow the on-screen prompts).
1From the start screen, press Menu, then scroll to Minibrowser. The
following message appears to remind you that you may be billed for
the connection time. (You can disable this message. See “Disable
minibrowser confirmations” on page 97.)
Browsing may incur charges. Continue? (Yes) (No)
2Press Yes. After a few seconds, the Home Page appears. (Your menu
may vary according to your service provider.)
Home Page
1 News
2 Yahoo!
3 Weather
4 Finance
5 Web site
Note:To end a Minibrowser session, press and hold .
• MINIBROWSER MENU
While in the Minibrowser, press and release the Power key to display
the Minibrowser menu:
•Help: Show a help page for the current site (accessible from some
pages).
•Home: Return to the Home page.
•Bookmark page: Set a bookmark for the current page.
•Show URL: Show the web address (Uniform Resource Locator) for
1
[ 94 ]
the current page.
•Restart: Return to the Home page and delete all stored pages.
•Version: Show the version of Minibrowser software.
•Advanced: Change server and encryption settings.
•Exit Minibrowser: Exit the Minibrowser.
•Switch off!: Turn off the phone.
About web page content
The following items may appear on web pages:
• numbered options (some options may not be numbered)
• links (embedded in content)
• input fields for text or numbers
• simple text
• NAVIGATING IN THE MINIBROWSER
SCROLL THROUGH THE MENUS AND CONTENTS OF A PAGE
Press the scroll keys ( and ) to scroll through the menus and
contents of a page and to see the content of pages that do not fit on one
screen. To scroll quickly, press and hold the scroll key.
GO BACK (PREVIOUS PAGE)
To go back to a previous page, press the End key .
GO TO THE HOME PAGE
• Press the End key repeatedly to move back through
previously viewed pages until the Home Page appears.
• OR, press and release the Power key to display the
Minibrowser menu, scroll to Home, then press OK.
[ 95 ]
17
ACTIVATE AN ITEM (FOR EXAMPLE, A LINK)
• Press the appropriate number key on your phone’s keypad (if the
item on the page is numbered).
• OR, scroll to the item, then press the appropriate selection key
(for example, to activate a link).
SELECTION KEYS
To navigate to different screens or select special functions, use the selection
keys. The function of each selection key can change with each page and
depends on each highlighted item.
• (Left selection key) - Usually selects the highlighted item, but
its function may change depending on what you are doing.
• (Right selection key) - Usually selects a secondary option or
displays a menu of secondary options.
•LINKS
Links usually appear as items in a numbered list. Depending on its type,
when activated, a link will:
• Take you to another page or site
• Make a phone call (Some sites support this feature. When you make
the call, the browser connection terminates, but the page you were
viewing is stored in memory. After you end the call, the page you
were viewing is displayed again and you can continue browsing.)
To activate a link:
1Move the cursor until the desired link is highlighted.
2Press the appropriate selection key. (If the link is a phone number, in
some cases, you can also press the Talk key to make the call.)
1
[ 96 ]
• BOOKMARKS
You can set a bookmark for a web page so that you can quickly go to that
page later. (You may also be able to set bookmarks via a personal account
at your service provider’s web site.)
SET A BOOKMARK
1Go to the page for which you want to set a bookmark.
2Press and release the Power key . The Minibrowser menu appears.
3Scroll to Bookmark page, then press Select. (A message may appear
asking you to confirm this action.)
GO TO A BOOKMARKED PAGE
1From the Home Page, scroll to Bookmarks, then press Select. A list
of your bookmarks appears.
2Select the bookmark that represents the page you want go to, then
press Select.
Tip: A number is associated with each bookmark in the bookmark list. To
quickly go to a bookmark, press and hold the appropriate number key.
• RECEIVING MESSAGES VIA THE MINIBROWSER
Depending on your service provider, you may be able to receive messages
via the Minibrowser. The procedure you use to read a Minibrowser message
varies depending on your service provider. For more information, contact
your service provider. (This information may also be available at your
service provider’s web site.)
• ENDING THE MINIBROWSER SESSION
•Press and hold .
•OR, Display the Home Page (If the Home Page is not currently
displayed, press repeatedly until it is displayed.) Press .
Exit Minibrowser? appears. Press Exit.
[ 97 ]
17
• OR, press and release the Power key . Select Exit Minibrowser.
• DISABLE MINIBROWSER CONFIRMATIONS
You can specify whether or not you want your phone to confirm your choice
to connect to the web or exit the Minibrowser session.
1Press Menu 4-1-5 (Settings - Call settings - Minibrowser
confirmations). The following options appear:
•Both: Your phone prompts you to confirm your choice before
connecting to the web and before exiting the Minibrowser session.
•None: Your phone never prompts you to confirm your choice.
•On connection: Before connecting to the web, your phone prompts
you to confirm your choice.
•On exit: Before exiting the Minibrowser session, your phone prompts
you to confirm your choice.
2Scroll to the appropriate option, then press OK.
Tip:To prevent unintentional exiting of the Minibrowser session
(such as when pressing repeatedly to move back through
previously viewed pages), select Both or On exit. This will ensure
that a confirmation message appears before exiting.
Note:If you press and hold , the Minibrowser session ends
without confirmation, regardless of the Minibrowser confirmation
setting.
1
[ 98 ]
18) Use your personal assistant
Your phone can be your personal assistant. It can wake you up in the
morning, or remind you of meetings, birthdays, and tasks. Check the current
time and calculate a tip at dinner. It’s a calendar, clock, alarm clock,
calculator, and phone book -- everything you need to keep track of your life.
• USE THE CALENDAR
The calendar keeps track of birthdays, meetings, or
calls you need to make. The calendar can sound an
alarm to remind you to make call or go to a meeting.
Note:Unlike the alarm clock, if your phone
is turned off, it will not automatically wake up and sound the
alarm for a calendar note. For the alarm to sound for a calendar
note, your phone must be turned on.
View the calendar
To view the calendar, press Menu 8 (Calendar). You may be prompted to
set the date and time.
• Set the date using the mm/dd/yyyy format.
For example, if the date is May 31, 2002, enter 05312002. Existing
characters are overwritten.
• Set the time using the mm:hh format.
For example, if the time is 7:00, enter 0700. Existing characters are
overwritten. If your phone is set to display the am/pm time format,
scroll to am or pm. Press OK.
Move from day to day
• Use the scroll keys to move through the calendar, OR...
•Press Options, scroll to Go to date, and press Select. Enter the date,
and press OK.
Exit
7
Select
Calendar
[ 99 ]
18
Create a calendar note
This option lets you create a note with one of four categories: Reminder,
Call, Meeting, or Birthday. You can set an alarm for any calendar note.
1Go to the day you want, and press Options.
2Scroll to Make note, and press Select.
3Scroll to the type of note you want to create (Reminder, Call, Meeting,
or Birthday). Press OK.
REMINDER
The Subject field appears.
1Enter the information, and press OK. The current date appears.
• If you want to change the date for this reminder, do so. Press OK.
• If you do not want to change the date, press OK.
The message Set alarm for the note? appears.
2To answer the Set alarm for the note? question, press Yes or No.
•Press No to specify no alarm. Calendar note saved appears.
•If you press Yes, the Alarm date field appears.
3Enter the date on which you want the alarm to sound, and press OK.
The Alarm time field appears.
4Enter the time when you want the alarm to sound. Use the hh:mm
format. Press OK.
5Select either am or pm, and press OK.
The message Calendar note saved appears.
Note:Step 5 appears only if you have selected the am/pm format.
1
[ 100 ]
CALL
The Number field appears.
1Enter a number or press Search and find the number, then press OK.
The Date field appears.
2Enter the date when you need to make this call, and press OK. The
Time field appears.
3Enter the time when you need to make this call. Using the hh:mm
format. Press OK.
4Select am or pm, and press OK. Set alarm for the note? appears.
Note: Step 4 appears only if you have selected the am/pm format.
5To answer the Set alarm for the note? question, press Yes or No.
• If you don’t want to set an alarm, press No.
• The message Calendar note saved appears.
•If you press Yes, the Alarm date field appears.
6Enter the date when you want the alarm to sound, and press OK. The
Alarm time field appears.
7Enter the time (hh:mm format) for the alarm to sound. Press OK.
8Select am or pm, and press OK. Calendar note saved appears.
Note: Step 8 appears only if you selected the am/pm format.
MEETING
The Subject field appears.
1Enter the information, and press OK.
The current date appears. To use the current date, just press OK.
The Time field appears. You may enter a different date, and press OK.
2Enter the time when you need to go to this meeting using the hh:mm
format. Press OK. Select am or pm. Press OK. Set alarm for the note?
appears.
Note: Step 2 appears only if you selected the am/pm format.
[ 101 ]
18
3Answer the Set alarm for the note? question, press Yes or No.
• If you do not want to set an alarm, press No.
• The message Calendar note saved appears.
•If you press Yes, the Alarm date field appears.
4Enter the date when you want the alarm to sound, and press OK.
The Alarm time field appears.
5Enter the time when you want the alarm to sound. Use the hh:mm
format. Press OK.
6Select either am or pm, and press OK.
Note:Step 6 appears only if you selected the am/pm format.
The message Calendar note saved appears.
BIRTHDAY
The Name field appears.
1Enter the name of the person having a birthday, and press OK. The
Date field appears.
2Enter the month and day of the person’s birthday, and press OK. The
Year of birth field appears.
3Enter the year using the yyyy format. Press OK. Set alarm for the
note? appears.
4Press Yes or No.
• If you don’t set an alarm, Calendar note saved appears.
•If you press Yes, the Alarm date field appears.
5Enter the date when you want the alarm to sound, and press OK. The
Alarm time field appears.
6Enter the time for the alarm to sound. Use hh:mm format. Press OK.
7Select either am or pm, and press OK. Calendar note saved appears.
Note:Step 7 appears only if you selected the am/pm format.
1
[ 102 ]
View the day’s notes
To view your notes for a given day, display that day in the calendar.
1Press Options.
2Scroll to View day notes.
3Press Select.
If you have more than one note for the day, scroll the list. You have several
Options:
•Erase - Erase the note.
•Edit - Edit the note.
•Move - Move the note to a different date.
View all notes
To view all notes in your calendar, press Options. Scroll to View all notes.
Press Select. If your calendar has more than one note, scroll the list.
Erase notes
You must choose which notes to erase. Select from these erase options:
ERASE THE NOTE YOU’RE VIEWING
Press Options. Scroll to Erase. Press OK.
ERASE THE NOTES FOR A GIVEN DAY
While viewing the day in your calendar, press Options. Scroll to Erase
notes and press Select. Scroll to Of chosen day, and press OK. Scroll the
list of notes. When a note you want to erase appears, press Erase.
ERASE ONE NOTE AT A TIME FOR EACH NOTE IN YOUR CALENDAR
While viewing any day in your calendar, press Options. Scroll to Erase
notes. Press Select. Scroll to One by one., and press OK. Scroll the list of
notes. When a note you want to erase appears, press Erase.
[ 103 ]
18
ERASE ALL NOTES IN YOUR CALENDAR
To erase all notes in your calendar while viewing any day in your calendar:
1Press Options.
2Scroll to Erase notes.
3Press Select.
4Scroll to All at once, and press OK.
When a calendar alarm goes off
• To shut off the alarm, press OK.
• To shut off the alarm for 10 minutes, press Postpone. The alarm can
be postponed 10-minute increments for up to 90 minutes.
Set the calendar date
1Press Options.
2Scroll to Set the date.
3Press Select.
4Enter the date using the mm/dd/yyyy format.
For example, if the date is May 31, 2002, enter 05312002. Existing
characters are overwritten.
5Press OK.
• DOWNLOAD RINGING TONES
Depending on your service provider, you can download (over the air) ringing
tones and save them in your phone.
Note:Methods for downloading ringing tones vary with service
providers. Some allow you to send a ringing tone to the phone
from Internet web pages. Contact your service provider for details.
The names of tones that you download and save appear in the list that
appears when you press Menu 3 -1 - 2 - 3 (Profiles - Normal -
Customize - Ringing tone).
1
[ 104 ]
Note:The list also appears if you press Menu 3 - 2 - 2 - 3, Menu
3 - 3 - 2 - 3, etc., when you want to customize a profile other
than the Normal profile.
In addition to the 40 default ringing tones that come with your phone,
you can save 10 downloaded ringing tones.
Notification of received ringing tone
When a ringing tone has been downloaded to your phone, the message
Ringing tone received appears.
• To listen to the tone, press Options, scroll to Playback, then press OK.
The phone plays the tone. To stop playing the tone, press Quit or
.
• To discard the tone immediately after you receive it (before you press
Options), press Exit or . Or, to discard the tone after you have
pressed Options, scroll to Discard, then press OK.
• To save the tone after you listen to it, scroll to Save, then press OK. If
space in your phone’s memory exists for the tone, the phone prompt
asks if you want to put the tone in a space. If you choose to put it in
a space, the tone at first will be called Personal. If space does not exist,
scroll until the name of the tone you want to replace is highlighted,
then press Replace. To view the list of tones, press Menu 3 - 1 - 2 - 3
(or Menu 3 - 2 - 2 - 3, etc.).
• ALARM CLOCK
The alarm clock operates off the phone clock. If
you turn your phone off after you set the alarm, it
will automatically wake up and sound the alarm at
the specified time. The alarm volume is determined
by the current ringing volume and tone settings.
[ 105 ]
18
If you selected the Silent or Meeting profile or the Beep once or Silent
ringing option, your alarm will quietly beep once. The best profile to use
with the alarm clock is Normal or Outdoor unless you modified their original
settings or renamed them. Your phone will vibrate if you’ve activated this
feature in the current profile.
Set the alarm clock
1Press Menu 4 - 2 - 2 (Settings - Phone settings - Alarm clock).
The Set alarm time message appears.
2Enter the alarm time.
For example, to set the alarm for 7:00, press .
Existing characters are overwritten.
3Press OK. If the time format is am/pm, scroll to am or pm, and press OK.
The Alarm on message appears. On the Start screen, the alarm icon
( ) appears, indicating that the alarm is set.
Turn off the alarm clock when it rings
When the alarm clock rings:
• Press Stop to turn it off. If the phone was off when the alarm sounded,
the phone asks if you want to keep the phone on. Press Yes or No.
•Press Snooze to set the alarm to go off again in 10 minutes.
If you don’t turn off the alarm, it sounds for one minute. Ten minutes later
it will sound again for one minute. This continues until you press Stop.
Warning: Do not switch on the phone where wireless phone use
is prohibited or where it might cause interference or danger.
Turn off the alarm clock altogether
If you never use the alarm, turn it completely off. Press Menu 4 - 2 - 2
(Settings - Phone settings - Alarm clock). Scroll to Off and press OK.
1
[ 106 ]
• CALCULATOR
The calculator adds, subtracts, multiplies, and
divides.
1Press Menu 7 (Calculator).
2Enter the first number in the equation.
(To enter a decimal point, press . To clear
one digit, press Clear. To clear all digits, press and hold Clear.)
3Enter the symbol: (+ add), (- subtract), (* multiply), or(/ divide):
• Press as many times as necessary, OR...
•Press Options. Scroll to Add, Subtract, Multiply, or Divide. Press
OK.
4Enter the second number in the equation.
5Calculate the result:
•Press , OR...
•Press Options. Scroll to Equals. Press OK.
[ 107 ]
19
19) Games
Your phone includes four games: Memory/Pairs*, Snake, Logic, and Dice.
1Press Menu 6 (Games).
2Scroll until the name of the game you want to play is highlighted.
Press Select.
3Scroll to the appropriate menu item. Press Select:
•New game - a new game
•Top score - Display the top score (only for Pairs and Snake)
•Instructions - Learn how to play the game
•Level - Set the level of difficulty (for Dice, choose the number of
dice to use)
•Continue - Return to a game in progress
*Name for this game may vary depending on your service provider.
•PAIRS*
A picture appears under each black box. Find pairs of pictures as quickly
as possible in as few tries as possible. The pairs found stay visible. A higher
level of play increases the number of boxes.
• , , , and - Move the highlighter to a square.
• - Reveal a picture.
• - Jump to the left over revealed pictures or move from top left
to bottom right.
• - Jump to the right over revealed pictures or move from bottom
right to top left.
•SNAKE
At the beginning of the game, a piece of food appears in the middle of the
screen, and the snake (line) is moving at the bottom of the screen. Use
, , and to direct the snake toward the food and watch the
1
[ 108 ]
snake grow longer. If the snake hits its own tail or the wall, the game is
over. The longer the snake, the higher the score. If you choose a higher
level of play, the snake moves faster.
•LOGIC
At the beginning of the game, several pictures appear at the top left corner
of the screen. The cursor is a pair of flashing brackets. Find the secret
combination of pictures for each column.
• (up), (left), and (down) - Move the cursor.
• - Insert a picture.
When you think you have the right combination of pictures in a column,
press . The result is presented as a set of marks over the column:
•Rectangle - The correct picture is in the right place.
•Line - The correct picture is in the wrong place.
To copy a picture from a previously accepted column, press to move
the cursor to the desired picture, then press to accept the selection.
When all figures are correct and in the right place in each column, the
game ends. A higher level of play gives more pictures for you to work with.
•DICE
Use this game to play other games that require a set of dice, if one isn’t
available. Before you choose New game, use the Level option to choose
the number of dice (as many as six) that you will use. When you start a
new game, the dice roll for a couple of seconds and then stop.
• (left) and (right) - If you chose to use more than one die,
use these keys to select a die before you roll it, lock it, or unlock it.
• - To lock or unlock a die, select it, then press this key. The border
of a locked die is thick.
• - Roll the unlocked dice again.
You can roll, lock, and unlock each die as many times as you wish.
[ 109 ]
20
20) Reference information
• BATTERIES, CHARGERS, AND ACCESSORIES
This section provides information about the phone’s batteries, accessories,
and chargers. Be aware that the information in this section is subject to
change as the batteries, chargers, and accessories change.
This phone is intended for use when supplied with power from an ACP-7U,
an ACP-8U, LCH-8, or an LCH-9. Other usage could invalidate any approval
given to this apparatus and might be dangerous.
Warning: When you purchase batteries, chargers, and accessories
for your phone, use only batteries, chargers, and accessories that
have received approval from the phone’s manufacturer. The use of
any other type of phone-related hardware will invalidate any
approval or warranty applying to the phone, and could also be
dangerous. For availability of approved batteries, chargers, and
accessories, check with your dealer.
• When the battery is fully charged, the indicator will tell you that the
battery is fully charged.
• When you are not using a charger, disconnect it from the power source.
Do not leave the battery connected to a charger for more than a week,
since overcharging could shorten its life span. If left unused, a fully
charged battery will discharge itself over time.
Temperature extremes can affect the ability of your battery to charge.
Therefore, allow it to cool down or warm up before trying to charge it.
When the battery is running out of power and your phone only has a few
minutes of talk time remaining, a warning tone sounds and the Battery
low message appears briefly. When no talk time is left, a warning tone is
sounded and the phone switches itself off.
2
[ 110 ]
Do not short-circuit the battery. Accidental short-circuiting can occur when
a metallic object, like a coin, a clip, or a pen causes a direct connection of
the + and - terminals of the battery, which are metal strips on the edge
of the battery.
An example of short-circuiting could occur if you carry a spare battery in
your pocket or purse, where the battery could come into contact with
such objects like a coin. Short-circuiting could damage either the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in either
summer or winter conditions, will reduce the capacity and lifetime of the
battery. Always try to keep the battery between 15°C and 25°C (59°F and
77°F).
A phone with a hot or cold battery might not work temporarily, even if the
battery is fully charged. The performance of Li-Ion batteries is particularly
limited in temperatures below 0°C (32°F).
The following list provides a guideline that you can follow:
• When the operating time (talk time and standby time) is noticeably
shorter than normal, buy a new battery.
• Use the battery only for its intended purpose.
• Never use any charger or battery that is damaged and/or worn out.
• Batteries must be recycled or disposed of properly. Do not dispose of
batteries by putting them in fire!
• When you disconnect the power cord of any accessory, grasp and pull
the plug, not the cord.
[ 111 ]
20
• IMPORTANT SAFETY INFORMATION
This section provides additional safety information. A brief overview of
safety can be found in “For your safety” on page 9.
Traffic safety
Do not use a hand-held telephone while driving a vehicle. If you are using
a hand-held phone, park the vehicle before conversing. Always secure the
phone in its holder; do not place the phone on the passenger seat or where
it can break loose in a collision or sudden stop. The use of an alert device
to operate a vehicle’s lights or horn on public roads is not permitted.
Remember, road safety always comes first!
Operating environment
Remember to follow any special regulations in force in any area and always
switch off your phone whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to another device, read the
associated user guide first and obtain detailed safety instructions.
Note:Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that
for the satisfactory operation of the equipment and for the safety of
personnel, it is recommended that the equipment should only be used in
the normal operating position (held to your ear with the antenna pointing
over your shoulder).
Electronic devices
Most modern electronic equipment is shielded from radio frequency (RF)
signals. However, certain electronic equipment may not be shielded against
the RF signals from your wireless phone.
The following subsections provide more information about this topic.
2
[ 112 ]
PACEMAKERS
Pacemaker manufacturers recommend that a minimum separation of six
inches (20 cm.) should be maintained between a handheld wireless phone
and a pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with the independent research by and
recommendations of Wireless Technology Research. Persons with pacemakers:
• Should always keep the phone more than 6 inches (20 cm) from their
pacemaker when the phone is switched on;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the pacemaker to minimize the potential
for interference.
If you have any reason to suspect that interference is taking place, switch
off your phone immediately.
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the
event of such interference, you may want to consult your service provider.
OTHER MEDICAL DEVICES
Operation of any radio transmitting equipment, including cellular phones,
may interfere with the functionality of inadequately protected medical
devices. Consult a physician or the manufacturer of the medical device to
determine if they are adequately shielded from external RF energy or if you
have any questions. Switch off your phone in health care facilities when
any regulations posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be sensitive to
external RF energy.
VEHICLES
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles (for example, electronic fuel injection systems,
electronic anti-skid (anti-lock) braking systems, electronic speed control
systems, air bag systems). Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.
[ 113 ]
20
POSTED FACILITIES
Switch your phone off in any facility where posted notices so require.
Potentially explosive atmospheres
Switch off your phone if you are in any area that has a potentially explosive
atmosphere, and obey all signs and instructions. Sparks in such areas
could cause an explosion or fire, resulting in bodily injury or even death.
You are advised to switch off the phone while at a refueling point (service
station). You are also reminded of the need to observe restrictions regarding
the use of radio equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often—but not always—
clearly marked. These areas include the following: below deck on boats;
chemical transfer or storage facilities; vehicles using liquefied petroleum
gas (such as propane or butane); areas where the air contains chemicals
or particles, such as grain, dust or metal powders; and any other area
where you would normally be advised to turn off your vehicle engine.
Vehicles
Only qualified personnel should service the phone, or install the phone in
a vehicle. Faulty installation or service may be dangerous and may invalidate
any warranty which may apply to the unit.
Check regularly that all wireless phone equipment in your vehicle is mounted
and operating properly.
Do not store or carry flammable liquids, gases or explosive materials in the
same compartment as the phone, its parts or accessories.
For vehicles equipped with an air bag, remember that an air bag inflates
with great force. Do not place objects, including both installed or portable
wireless equipment, in the area over the air bag or in the air bag deployment
area. If in-vehicle wireless equipment is improperly installed and the air
bag inflates, serious injury could result.
2
[ 114 ]
Switch off your phone before boarding an aircraft. The use of wireless
telephones in an aircraft may be dangerous to the operation of the aircraft,
disrupt the wireless telephone network and may be illegal.
Failure to observe these instructions may lead to the suspension or denial
of telephone services to the offender, or legal action, or both.
• EMERGENCY CALLS
Important:This phone, like any wireless phone, operates using
radio signals, wireless and land line networks as well as user-
programmed functions which cannot guarantee connection in all
conditions. Therefore, you should never rely solely upon any
wireless phone for essential communications (for example, medical
emergencies).
Remember, to make or receive any calls the phone must be switched on and
in a service area with adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when certain network services
and/or phone features are in use. Check with local service providers.
If the battery is almost fully discharged when you connect a charger to
your phone, it might be necessary to wait a few minutes before you will
be able to make or receive calls.
Emergency numbers vary by location. If the official emergency number
that has been programmed into your phone differs from the number that
is used in your current location, do not use the emergency key 9 feature
(“Use emergency key 9” on page 63) to make the call. Instead, manually
enter the official number that is used in your current location, then press
.
If you’re playing a game, using the calculator, or editing (such as when
using the Minibrowser or editing a phone book entry), press to
return to the Start screen before you make an emergency call.
[ 115 ]
20
Depending on your provider, you may not be able to use the emergency
key 9 feature if any of the following conditions exist:
• Emergency key 9 feature is not activated (“Use emergency key 9” on
page 63).
• Keyguard is active (“Use Keyguard to lock the keypad” on page 68).
• Phone is locked (“Protect your phone with phone lock” on page 66).
• Call restriction that prevents the call is active (“Restrict calls” on
page 69).
Note:You may need to turn those features off before you can
make an emergency call. Consult this document and your local
service provider.
Make an emergency call
Depending on your phone settings, you may be able to use the emergency
key feature to make the call. (See “Use emergency key 9” on page 63.)
1If the phone is not on, switch it on.
2Enter the emergency number for your present location (emergency
numbers vary by location).
3Press the Talk key .
When making an emergency call, remember to give all the necessary
information as accurately as possible. Remember that your wireless phone
may be the only means of communication at the scene of an accident -
do not end the call until you have permission to do so.
Note:When you make the call, your phone changes to emergency
call mode. If you choose to exit this mode, emergency operators
may not be able to contact you.
Keep your phone in emergency call mode until emergency personnel arrive
on the scene. In emergency call mode, some menu items may not be available.
To exit emergency call mode, at the Start screen, press Exit. When the
question Restore normal service? appears, press OK.
2
[ 116 ]
Certification information
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of
the U.S. Government. These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed to
assure the safety of all persons, regardless of age and health. The exposure
standard for wireless mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC
is 1.6W/kilogram.* Tests for SAR are conducted using standard operating
positions accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR level of
the phone while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels so as
to use only the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by
the government-adopted requirement for safe exposure. The tests are
performed in positions and locations (for example, at the ear and worn on
the body) as required by the FCC for each model. The highest SAR value for
this model phone as reported to the FCC when tested for use at the ear is
1.17 W/kilogram and when worn on the body, as described in this user
guide, is 0.49 W/kilogram. (Body-worn measurements differ among phone
models, depending upon available accessories and FCC requirements). While
there may be differences between the SAR levels of various phones and at
various positions, they all meet the government requirement.
[ 117 ]
20
The FCC has granted an Equipment Authorization for this model phone
with all reported SAR levels evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this model phone is on file
with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID:GMLNSD-5FX.
For body worn operation, to maintain compliance with FCC RF exposure
guidelines, use only Nokia approved accessories. When carrying the phone
while it is on, place the phone in the specific Nokia belt-clip that has been
tested for compliance.
Use of non-Nokia-approved accessories may violate FCC RF exposure
guidelines and should be avoided.
* In the United States and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kilogram (W/kilogram) averaged over one gram
of tissue. The standard incorporates a substantial margin of safety to give
additional protection for the public and to account for any variations in
measurements. SAR values may vary depending on national reporting
requirements and the network band. For SAR information in other regions
please look under product information at http://www.nokia.com.
2
[ 118 ]
Care and maintenance
Your phone is a product of superior design and craftsmanship and should
be treated with care. The suggestions below will help you to fulfill any
warranty obligations and allow you to enjoy this product for many years.
When using your phone, battery, charger, OR any accessory:
• Keep it and all its parts and accessories out of small children’s reach.
• Keep it dry. Precipitation, humidity and liquids contain minerals that
will corrode electronic circuits.
• Do not use or store it in dusty, dirty areas as its moving parts can be
damaged.
• Do not store it in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp/melt certain plastics.
• Do not store it in cold areas. When the phone warms up (to its normal
operating temperature), moisture can form inside the phone, which
may damage the phone’s electronic circuit boards.
• Do not attempt to open it. Non-expert handling of the device may
damage it.
• Do not drop, knock or shake it. Rough handling can break internal
circuit boards.
• Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean it. Wipe it with a soft cloth slightly dampened in a mild soap-
and-water solution.
• Do not paint it. Paint can clog the device’s moving parts and prevent
proper operation.
• Use only the supplied antenna. Removal or replacement of the
antenna by anyone other than a Nokia authorized service center is an
unauthorized modification and invalidates the warranty, can damage
the phone, and may violate regulations governing radio devices.
• If the phone, battery, charger, or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
[ 119 ]
20
• ACCESSORIES
If you want to enhance your phone’s functionality,
an extensive range of accessories is available for
you. You can select any of these items to help
accommodate your specific communication needs.
For availability of these and other accessories,
contact your service provider.
A few practical rules for accessory operation:
• Keep all accessories out of reach of small children.
• When you disconnect the power cord of any accessory, grasp and pull
the plug, not the cord.
• Check regularly that any vehicle-installed accessories are mounted
and are operating properly.
• Installation of any complex car accessories must be made by qualified
personnel only.
• Use only batteries, chargers, and accessories that have been approved
by the phone manufacturer for use with this particular phone model.
The use of any other types may invalidate any approval or warranty
applying to the phone, and may be dangerous.
Note:For availability of approved accessories, please check with
your authorized Nokia dealer.
2
[ 120 ]
• BATTERY
This section provides information about the phone’s battery. Be aware
that the information in this section is subject to change.
Several rechargeable batteries are available for use in your phone. The
battery model number is on the battery label which is visible when the
battery is removed from the phone.
Charging time
Note:Times are approximate. Charging for the specified time will
charge the battery to about 80% capacity. At 80% capacity, the
battery scroll bars on your phone’s screen stop scrolling. To obtain
100% charge, allow another two hours to “trickle-charge” the
battery.
Standby and Talk Times
Note:Dispose of used batteries in accordance with local
regulations.
[ 121 ]
20
• CHARGERS AND OTHER ACCESSORIES
This section provides information about the phone’s chargers and accessories.
Be aware that the information in this section is subject to change as the
chargers and accessories change.
The chargers and accessories that are described in this section are available
for your phone. Contact your dealer for details. Also, refer to the accessories
brochure that was included in your sales package for the entire line of
Nokia Original Accessories.
Standard Travel Charger (ACP-7U)
This lightweight (187g) and durable AC charger
can be used with all battery options.
To use the Standard Travel Charger, plug it into a
wall outlet and connect the lead from the charger
to the base of your phone.
Rapid Travel Charger (ACP-8U)
This lightweight (110g) AC charger can be used
with all battery options. Calls can be made during
charging, even with a fully discharged battery.
To use the Rapid Travel Charger (ACP-8U), plug it
into a standard 120V AC wall outlet, and connect
the lead from the charger to the base of your phone.
The charger can also be used together with the
optional Compact Desktop Charging Stand (DCH-8).
Approximate charging times for discharged
batteries are shown at the beginning of this section.
2
[ 122 ]
Desktop Charging Stand (DCH-8)
Used together with the Standard Travel Charger
(ACP-7U) or the Rapid Travel Charger (ACP-8U),
the Compact Desktop Charging Stand (DCH-8) is
an economical choice when you need your phone
close at hand.
With the battery still attached, place your phone
in the charging stand to begin charging your phone’s battery.
Charging is indicated by the scrolling battery bars on the right side of your
phone’s display. When the scrolling stops, the battery is approximately
80% charged.
To get a fully charged battery, leave your phone in the charging stand for
a couple of hours after the scrolling stops.
Rapid Cigarette Lighter Charger (LCH-9)
You can charge your phone’s battery from
your vehicle battery by using the Rapid
Cigarette Lighter Charger (LCH-9).
Calls are possible during charging. A green
light indicates the charger is ready for charging
(when not charging) or finished charging (if it
has been charging). The battery charging times
are the same as those for the Rapid Travel Charger (ACP-8U).
The input voltage range is from 11 to 32V DC, negative grounding. Avoid
prolonged charging with the Rapid Cigarette Lighter Charger (LCH-9) when
the car engine is not running; this may cause the battery of your car to
drain. In some cars the cigarette lighter plug is not provided with electricity
if the ignition is not switched on.
[ 123 ]
20
Rapid Mobile Charger (LCH-8)
You can charge your phone’s battery from
your vehicle battery by using the Rapid
Mobile Charger (LCH-8).
Calls are possible during charging. A green
light indicates the charger is ready for
charging (when not charging) or finished
charging (if it has been charging).
The input voltage range is from 10.8 to 32V DC, negative grounding. Avoid
prolonged charging with the Rapid Mobile Charger (LCH-8) when the car
engine is not running; this may cause the battery of your car to drain. In
some cars the cigarette lighter plug is not provided with electricity if the
ignition is not switched on.
Compact Desktop Charging Stand (DCH-9)
Compatible with all battery options, the Compact Desktop Charging Stand
can be used with the Standard Travel Charger (ACP-7U) or the Rapid
Travel Charger (ACP-8U).
The Compact Desktop Charging Stand provides mounting for both the
phone and a spare battery. Plug the charger into a wall outlet and connect
the connector to the back of the Compact Desktop Charging Stand. Place
your phone and/or a spare battery in the stand to begin battery charging.
When the phone is charging, no lights are displayed on the stand (unless
a spare battery is being charged, too); check the charging status of the
phone battery on your phone’s screen.
2
[ 124 ]
Note:The battery in the rear slot will not begin charging until the
battery in the front slot is fully charged.
When the spare battery is charging, check the status indicator on the left
side of the charging stand. A red light indicates that the battery is charging;
a green light indicates that the battery is charged to at least 80% of its
capacity.
The phone has the built-in intelligence to maintain the battery, so there
is no need for a discharge feature on the stand.
• TROUBLESHOOTING
This section provides a table that lists some of the most commonly-
encountered problems and provides possible solutions.
My phone
isn’t
charging.
The charger and the phone
are not properly connected.
Securely connect the charger
to the phone.
The charger is not properly
plugged in.
Ensure that the charger is
plugged in correctly.
The battery may be too hot
or cold.
Allow the battery to return
to room temperature before
charging.
My phone
isn’t
making/
answering
calls.
The battery is not charged. Charge the battery.
The signal strength is poor. If you are indoors, move
toward a window.
I can’t
listen to my
voice
messages.
You don’t have voice mail
service.
Call your wireless service
provider.
[ 125 ]
20
I can’t
listen to my
voice
messages.
(continued)
You have not set up your
voice mailbox with your
service provider.
Call your wireless service
provider.
You have not saved your
voice mail number in your
phone.
Refer to “Set up your voice
mailbox” on “Set up your
voice mailbox” on page 36.
The voice mail number you
have saved is incorrect.
Call your wireless service
provider.
You have forgotten your
password or are entering it
incorrectly.
Call your wireless service
provider.
My call
does not go
through.
Your phone may be turned
off.
Verify that your phone is on.
You may be outside your
service area. No Service
appears on the screen.
Verify that you are in your
service area.
You may have call
restrictions set on that
phone number.
Verify that the number does
not have any restrictions on
it. See “Restrict calls” on
page 69.
Your phone may be locked. Refer to “Protect your phone
with phone lock” on page 66.
You may need to dial a’1’
and/or an area code with
the number.
Call your wireless service
provider for dialing rules.
2
[ 126 ]
21) Frequently Asked Questions
(FAQ)
This section provides answers questions users frequently ask. Some answers
tell you to use shortcuts, refer to “Navigate menus” on page 25.
Q. How do I lock my phone?
A. Press Menu 4 - 3 - 2 - 1 (Menu - Settings - Security settings -
access codes), enter your lock code, scroll to On. Press OK.
Q. How do I unlock my phone?
A. Press Menu 4 - 3 - 2 - 1 (Menu - Settings - Security settings -
access codes), enter your lock code, scroll to Off. Press OK.
Q. What is my lock code?
A. The lock code enables you to lock your phone, thus preventing someone
else from using it. The default lock code is 1234. However, it is suggested
that you change this code immediately.
Q. What is my security code?
A. The default security code is 12345. However, it is suggested that you
change this code immediately. Certain features can be used only after
the correct security code has been successfully entered.
Q. How do I lock the keypad?
A. There are three ways you can lock the keypad:
•Press and hold .
•Press Menu, scroll to Keguard, press Select.
•From the Start screen, press Menu - 1 - 0 (Menu - Keyguard).
This feature is called Keyguard.
[ 127 ]
21
Q. How do I unlock the keypad (Keyguard)?
A. There are two ways to unlock the keypad:
• Press and hold , then press OK, OR...
•Press Unlock and .
Q. How do I make the ringing louder?
A. Press Menu 3 - 1 - 2 - 2 (Menu - Profiles - Normal - Customize -
Ringing volume), then choose a volume level.
Q. How do I change the ringing tone?
A. Press Menu 3 (Menu - Profiles). Scroll the list until you find the one
where you will set the ringing tone. Press Options, and select Customize.
Press OK, and scroll to Ringing tones. Press Select, and scroll to the
tone you will use, and press OK.
Q. How do I store my voice mailbox number?
A. Press Menu 0 - 1 - 2 - 2, enter your voice mailbox phone number.
Press OK. The screen tells you that the number is saved. Then the
following message appears: Save hidden voice mailbox password?
Press Yes to save this number.
This mailbox number is valid until your phone number changes.
Q. How do I call my voice mailbox number (retrieve voice messages)?
A. When your phone alerts you to new voice messages, press Listen and
follow the instructions on the phone. If you’d rather listen to your
messages later, press Exit.
To listen to your voice messages at a later time, perform one of the
following actions:
• Press and hold the 1 key.
•Press Menu 0 - 1 - 2 - 1 (Messages - Voice messages - Listen
to voice messages). The message Calling voice mailbox appears
on the screen. Follow the prompts to access your messages.
[ 128 ]
21
Q. How do I find my phone’s model number?
A. Turn your phone off, then remove the battery from the back of the
phone. Your phone’s model number is listed on the sticker that
appears on the back of the phone, after the word “Model”.
Q. How do I redial the last-dialed number.
A. Press the talk key twice, quickly.
Q. How do I assign a key to one-touch dialing?
A. Press Names. Scroll to one-touch dialing. Press Select. Scroll to the
first key that includes the message (empty). (Or, you can overwrite an
existing key.) Press Assign. Scroll to the name or number to which you
want to assign to this key. Press Select.
Q. How do I find out how many memory locations the phone has?
A. Press Names and scroll to Options. Press Select. Scroll to Memory
status. Press Select.
Q. How do I find my phone’s ESN (electronic serial number)?
A. Turn your phone off. Press and hold the button at the top of the battery
as you slide the battery toward the bottom of the phone. Lift the battery
off the phone. Your phone’s ESN is listed on a sticker on the back of
the phone, after the letters “ESN”.
Q. How can I change the contrast of my phone’s display?
A. The contrast of your phone’s display is fixed and can not be changed.
Q. How do I clear my call timers?
Warning: The clearing of call timers cannot be undone.
A. Press Menu 2 - 5 - 4 and when the Security code field appears,
enter your security code. Press OK.
[ 129 ]
21
Q. Can I receive a data or fax call while a voice call is in progress?
A. Yes. Your phone will display either Data call or Fax call to indicate
the type of call. If the cable is not connected, the phone will display
Fax call, connect data cable or Data call, connect data cable. If you
have Caller ID, the caller’s name or number will also be displayed.
You must first terminate the voice call, then launch the appropriate data
or fax software and allow the software to accept the incoming call.
Q. Can I receive voice calls (or other types of calls) while a data or
fax call is in progress?
A. No. The caller will receive a busy signal.
Q. Can I make a voice call while a data or fax call is in progress?
A. No. If a voice call is attempted while a data or fax call is in progress,
the phone will display End data call?
• End the data or fax call from your computer’s software, or
•Press Back to return to the data or fax call in progress.
Q. Can I place or receive a data or fax call while in analog mode?
A. Yes, but it requires a special data cable and modem. Contact your
service provider.
[ 130 ]
22
22) Technical Information
Weight 83 g (2.92 oz.) with BLB-2 Battery
Size 69 cc (4.21 cu. in.)
Frequency Range 1851.25 - 1908.75 MHz MHz (TX)
1931.25 - 1988.75 MHz (RX)
Transmitter Output Power 23.5 dBm
Operating Temperature -30°C to +60°C
(-22°F to +140°F)
Number of Channels 832
Number of NAMs 2
Memory Capacity Up to 200 numbers
[ 131 ]
23
23 NOKIA One Year Limited
Warranty
Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free
from defects in material and workmanship that result in Product failure
during normal usage, according to the following terms and conditions:
1The limited warranty for the Product extends for ONE (1) year beginning
on the date of the purchase of the Product. This one year period is
extended by each whole day that the Product is out of your possession
for repair under this warranty.
2The limited warranty extends only to the original purchaser (“Consumer”)
of the Product and is not assignable or transferable to any subsequent
purchaser/end- user.
3The limited warranty extends only to Consumers who purchase the
Product in the United States of America.
4During the limited warranty period, Nokia will repair, or replace, at
Nokia’s sole option, any defective parts, or any parts that will not
properly operate for their intended use with new or refurbished
replacement items if such repair or replacement is needed because
of product malfunction or failure during normal usage. No charge
will be made to the Consumer for any such parts. Nokia will also
pay for the labor charges incurred by Nokia in repairing or replacing
the defective parts. The limited warranty does not cover defects in
appearance, cosmetic, decorative or structural items, including
framing, and any non-operative parts. Nokia’s limit of liability under
the limited warranty shall be the actual cash value of the Product at
the time the Consumer returns the Product for repair, determined by
the price paid by the Consumer for the Product less a reasonable
amount for usage. Nokia shall not be liable for any other losses or
damages. These remedies are the Consumer’s exclusive remedies for
breach of warranty.
[ 132 ]
23
5Upon request from Nokia, the Consumer must prove the date of the
original purchase of the Product by a dated bill of sale or dated
itemized receipt.
6The Consumer shall bear the cost of shipping the Product to Nokia in
Melbourne, Florida. Nokia shall bear the cost of shipping the Product
back to the Consumer after the completion of service under this
limited warranty.
7The Consumer shall have no coverage or benefits under this limited
warranty if any of the following conditions are applicable:
a) The Product has been subjected to abnormal use, abnormal
conditions, improper storage, exposure to moisture or dampness,
unauthorized modifications, unauthorized connections,
unauthorized repair, misuse, neglect, abuse, accident, alteration,
improper installation, or other acts which are not the fault of
Nokia, including damage caused by shipping.
b) The Product has been damaged from external causes such as
collision with an object, or from fire, flooding, sand, dirt,
windstorm, lightning, earthquake or damage from exposure to
weather conditions, an Act of God, or battery leakage, theft,
blown fuse, or improper use of any electrical source, damage
caused by computer or internet viruses, bugs, worms, Trojan
Horses, cancelbots or damage caused by the connection to other
products not recommended for interconnection by Nokia.
c) Nokia was not advised in writing by the Consumer of the alleged
defect or malfunction of the Product within fourteen (14) days
after the expiration of the applicable limited warranty period.
d) The Product serial number plate or the accessory data code has
been removed, defaced or altered.
e) The defect or damage was caused by the defective function of the
cellular system or by inadequate signal reception by the external
antenna, or viruses or other software problems introduced into
the Product.
[ 133 ] 23
8Nokia does not warrant uninterrupted or error-free operation of the
Product. If a problem develops during the limited warranty period, the
Consumer shall take the following step-by-step procedure:
a) The Consumer shall return the Product to the place of purchase
for repair or replacement processing.
b) If “a” is not convenient because of distance (more than 50 miles)
or for other good cause, the Consumer shall ship the Product
prepaid and insured to:
Nokia Inc., Attn: Repair Department
795 West Nasa Blvd.
Melbourne, FL 32901
c) The Consumer shall include a return address, daytime phone
number and/or fax number, complete description of the problem,
proof of purchase and service agreement (if applicable). Expenses
related to removing the Product from an installation are not
covered under this limited warranty.
d) The Consumer will be billed for any parts or labor charges not
covered by this limited warranty. The Consumer will be
responsible for any expenses related to reinstallation of the
Product.
e) Nokia will repair the Product under the limited warranty within
30 days after receipt of the Product. If Nokia cannot perform
repairs covered under this limited warranty within 30 days, or
after a reasonable number of attempts to repair the same defect,
Nokia at its option, will provide a replacement Product or refund
the purchase price of the Product less a reasonable amount for
usage. In some states the Consumer may have the right to a
loaner if the repair of the Product takes more than ten (10) days.
Please contact the Customer Service Center at Nokia at the
telephone number listed at the end of this warranty if you need
a loaner and the repair of the Product has taken or is estimated
to take more than ten (10) days.
f) If the Product is returned during the limited warranty period, but
[ 134 ]
23
the problem with the Product is not covered under the terms and
conditions of this limited warranty, the Consumer will be notified
and given an estimate of the charges the Consumer must pay to
have the Product repaired, with all shipping charges billed to the
Consumer. If the estimate is refused, the Product will be returned
freight collect. If the Product is returned after the expiration of
the limited warranty period, Nokia’s normal service policies shall
apply and the Consumer will be responsible for all shipping charges.
9YOU (THE CONSUMER) UNDERSTAND THAT THE PRODUCT MAY CONSIST
OF REFURBISHED EQUIPMENT THAT CONTAINS USED COMPONENTS,
SOME OF WHICH HAVE BEEN REPROCESSED. The used components
comply with Product performance and reliability specifications.
10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A
PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION
OF THE FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE
FOREGOING LIMITED WARRANTY IS THE CONSUMER’S SOLE AND
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL,
INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING
BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS,
LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES,
LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT,
COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR
FACILITIES, DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES,
INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM
BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE,
STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF
NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL
NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE
LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE
PRODUCT IS BEING REPAIRED.
11 Some states do not allow limitation of how long an implied warranty
lasts, so the one year warranty limitation may not apply to you (the
[ 135 ]
23
Consumer). Some states do not allow the exclusion or limitation of
incidental and consequential damages, so certain of the above
limitations or exclusions may not apply to you (the Consumer). This
limited warranty gives the Consumer specific legal rights and the
Consumer may also have other rights which vary from state to state.
12 Nokia neither assumes nor authorizes any authorized service center
or any other person or entity to assume for it any other obligation or
liability beyond that which is expressly provided for in this limited
warranty including the provider or seller of any extended warranty or
service agreement.
13 This is the entire warranty between the Nokia and the Consumer, and
supersedes all prior and contemporaneous agreements or understandings,
oral or written, relating to the Product, and no representation,
promise or condition not contained herein shall modify these terms.
14 This limited warranty allocates the risk of failure of the Product
between the Consumer and Nokia. The allocation is recognized by
the Consumer and is reflected in the purchase price.
15 Any action or lawsuit for breach of warranty must be commenced
within eighteen (18) months following purchase of the Product.
16 Questions concerning this limited warranty may be directed to:
Nokia Inc.
Attn: Customer Service
7725 Woodland Center Blvd., Ste. 150
Tampa, FL 33614
Telephone: 1-888-NOKIA-2U (1-888-665-4228)
Facsimile: (813) 287-6612
TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6452)
17 The limited warranty period for Nokia supplied attachments and
accessories is specifically defined within their own warranty cards
and packaging.
*Nokia is a registered trademark of Nokia Corporation.
[ 136 ]
23
[ 137 ] 23
[ 138 ]
23
[ 139 ] 23