Microsoft PD-17 Portable Navigation Device User Manual PD 17 UG en1 with FCC IC notice

Microsoft Mobile Oy Portable Navigation Device PD 17 UG en1 with FCC IC notice

Manual revised

Download: Microsoft PD-17 Portable Navigation Device User Manual PD 17 UG en1 with FCC IC notice
Mirror Download [FCC.gov]Microsoft PD-17 Portable Navigation Device User Manual PD 17 UG en1 with FCC IC notice
Document ID861399
Application ID0tOFvjWBKVagnrRg88F0AQ==
Document DescriptionManual revised
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize50.65kB (633115 bits)
Date Submitted2007-10-30 00:00:00
Date Available2007-10-26 00:00:00
Creation Date2007-08-20 00:58:03
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2007-10-24 09:27:22
Document TitlePD-17_UG_en1_with_FCC&IC_notice.fm
Document CreatorFrameMaker 7.2
Document Author: cfilion

Nokia 500 Auto Navigation
User Guide
9206144
Issue 1
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this PD-17 product is in compliance
with the essential requirements and other relevant provisions of Directive 1999/
5/EC.
The product is in conformity with the limits defined in Directive 2004/104/EC
(amending Directive 72/245/EEC), Annex I, paragraph 6.5, 6.6, 6.8 and 6.9.
A copy of the Declaration of Conformity can be found at http://www.nokia.com/
phones/declaration_of_conformity/.
At the time of production of this document, the FM transmitter part of this
product is intended for use in the following countries: Belgium, Czech Republic,
Denmark, Estonia, Finland, Germany, Iceland, Liechtenstein, Luxembourg,
Portugal, Spain, Switzerland, Sweden, Turkey, United Kingdom. For the latest
information, refer to http://www.nokia.com.
© 2007 Nokia. All rights reserved.
Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation. Other
product and company names mentioned herein may be trademarks or tradenames of their
respective owners.
Portions of the Nokia Maps software are © 1996-2002 The FreeType Project. All rights
reserved.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document
in any form without the prior written permission of Nokia is prohibited.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and
noncommercial use in connection with information which has been encoded in compliance
with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial
activity and (ii) for use in connection with MPEG-4 video provided by a licensed video
provider. No license is granted or shall be implied for any other use. Additional information,
including that related to promotional, internal, and commercial uses, may be obtained from
MPEG LA, LLC. See .
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes
and improvements to any of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES
SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY
APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR
WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
The availability of particular products and applications and services for these products may
vary by region. Please check with your Nokia dealer for details, and availability of language
options.
This device complies with Directive 2002/95/EC on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Export Controls
This device may contain commodities, technology or software subject to export laws and
regulations from the US and other countries. Diversion contrary to law is prohibited.
9206144 / Issue 1 EN
Contents
For your safety ........... 6
Copy files to the card..................... 19
1.Introduction............. 7 3.Basic operation ...... 21
Bluetooth wireless technology........... 7
Global Positioning System (GPS)....... 7
DVD ............................................................ 8
2.Get started............. 10
Keys and parts...................................... 10
Front, right, and top view ............. 10
Back, left, and base view............... 11
Chargers................................................. 11
Charge the battery.............................. 11
First use ................................................. 12
Switch on or off and standby mode 13
Switch on or off............................... 13
Standby mode................................... 13
Bluetooth connection at startup 14
Set up Bluetooth connection........... 14
Connect manually or change the
connected device............................. 15
Connect automatically................... 15
Delete pairings ................................. 15
Disconnect a device ........................ 15
Turn Bluetooth connectivity on or off
15
Install the device in a car ................. 16
General safety instructions........... 16
Attach mobile holder to mounting
device.................................................. 17
Attach mounting device to
windscreen ........................................ 17
Place navigation device into holder..
18
Set navigation device to desired
position............................................... 18
Memory card ........................................ 18
Insert the card .................................. 19
Touch screen ........................................ 21
Open applications from map screen 21
Adjust the volume............................... 22
Adjust device settings........................ 22
Audio volume and key tones ........ 22
Language............................................ 22
Backlight ............................................ 22
Time and date................................... 23
System ................................................ 23
FM transmitter ................................. 24
Reset....................................................... 24
4.Navigator .............. 25
Map......................................................... 25
Tracking mode .................................. 26
Browsing mode ................................ 27
Navigate to a destination................. 28
Navigation screen ........................... 29
Functions available in navigation
screen.................................................. 30
Navigate to an address .................. 30
Navigate to a point of interest.... 31
Favourites .......................................... 31
Recent locations .............................. 32
Plan a route .......................................... 33
Traffic information (TMC)................. 34
Navigation settings ............................ 34
General settings............................... 34
Map settings ..................................... 35
Route settings .................................. 35
Volume................................................ 36
5.Call handling.......... 37
Make a call ............................................ 37
Tap a number using dial pad......... 37
Call a saved contact........................
Call register........................................
Voice dialling.....................................
Speed dialling (Favourites) ............
Answer or reject a call .......................
Call waiting........................................
In-call options ......................................
Adjust phone settings ........................
Phone connections ..........................
Bluetooth............................................
Contacts download..........................
Sort order of contacts.....................
Ringing tone......................................
Ringing volume.................................
38
38
38
39
39
39
40
40
40
41
41
41
41
41
Listen to music..................................... 43
Exit to navigation screen ................... 44
7.Video player ........... 45
Watch video clips ................................. 45
8.Image viewer.......... 47
View images........................................... 47
9.Battery
information
49
Care and
6.Music player .......... 42 maintenance............. 50
Use FM transmitter or headphones 42
FM transmitter.................................. 42 FCC/Industry Canada
Headphones ....................................... 43 notice........................ 52
Contents
For your safety
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should
be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could
affect performance.
Introduction
1. Introduction
You can use the Nokia 500 Auto Navigation device for GPS navigation in
a car and outdoors. You can also make calls, view photos, watch videos,
and listen to music.
Read this user guide carefully before using the device. Also read the user
guide for your mobile phone. It provides important safety and
maintenance information.
Check www.nokia.com/support or your local Nokia website for the latest
version of the user guide, additional information, software updates, and
services related to your Nokia product.
Your device and its accessories may contain small parts. Keep all
accessories and enhancements out of the reach of small children.
■ Bluetooth wireless technology
Bluetooth wireless technology allows you to connect compatible
devices without cables. A Bluetooth connection does not require that
the two devices be in line of sight, but the devices should be within
10 metres (33 feet) of each other. The connection is subject to
interference from obstructions, such as walls, or other electronic
devices.
The navigation device is compliant with Bluetooth Specification 2.0
supporting the following profiles: Handsfree Profile 1.5 and Phone Book
Access Profile (PBAP) 1.0. Check with the manufacturers of other
devices to determine their compatibility with this navigation device.
■ Global Positioning System (GPS)
The GPS is a worldwide satellite-based radio navigation system. The
internal GPS receiver can calculate the location of the device to an
accuracy of 10 metres. The accuracy depends, for example, on the
number of satellites, the signals of which the GPS module receives. In
optimal conditions, the accuracy may be within a few metres.
Introduction
The GPS antenna is located at the top of the navigation device. Some car
windscreens and windows may contain metal, that may block or weaken
the satellite signals.
If you stand still, GPS cannot detect which way you are facing because it
determines your direction on the basis of your movement.
Almost all digital cartography is inaccurate and incomplete to some
extent. Never rely solely on the cartography provided for use with the
GPS application.
The Global Positioning System (GPS) is operated by the government of the United
States, which is solely responsible for its accuracy and maintenance. The
accuracy of location data can be affected by adjustments to GPS satellites made
by the United States government and is subject to change with the United States
Department of Defense civil GPS policy and the Federal Radionavigation Plan.
Accuracy can also be affected by poor satellite geometry. Availability and quality
of GPS signals may be affected by your location, buildings, natural obstacles, and
weather conditions. The GPS receiver should only be used outdoors to allow
reception of GPS signals.
Any GPS should not be used for precise location measurement, and you should
never rely solely on location data from the GPS receiver and cellular radio
networks for positioning or navigation.
■ DVD
The navigation device comes with a DVD. You can do the following:
• Restore data from the DVD to your memory card.
• Copy new content from the DVD to the memory card. The content
can be, for example, maps, points of interest (POI) databases, and
languages.
• Copy content from the DVD to another memory card.
• Read the user guide available on the DVD in several languages.
Before copying data to the memory card, check that the card is not
locked. To copy content from the DVD to the memory card, ensure that
the card is inserted in the navigation device, and connect the device
with the supplied USB cable to your compatible PC. Alternatively, insert
the memory card into the memory card reader on your PC. Insert the
Introduction
DVD into the compatible DVD drive on your PC. The setup wizard starts
automatically (if allowed in the settings of the DVD drive) and guides
you through the setup.
If you want to change the contents of the memory card, select all the
maps, POI databases, and languages that you want to add to the card.
When the wizard copies these files to the memory card, the old files of
the same type are deleted from the card.
The Cities folder on the memory card is needed for the use of the
Navigator application. Do not modify or delete it manually. If needed,
you can restore the folder from the DVD using the wizard.
You can only select the device language from the languages that you
have chosen for Navigator. See also “Language,” p. 23.
To copy files to the memory card from a compatible PC, see “Memory
card,” p. 19.
10
Get started
2. Get started
■ Keys and parts
Parts of the device are magnetic. Metallic materials may be attracted to the
device. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
Front, right, and top view
10
1. Cover of connector for an optional external GPS antenna
2. Power key
3. Cover of stereo audio-out connector
4. Indicator light
5. Touch screen
6. Volume down key
7. Menu key
8. Volume up key
9. Memory card with adapter
10.Memory card slot
11
Get started
Back, left, and base view
1. Loudspeaker
2. Main power switch
3. Mini USB port/charger connector
4. Reset key
5. Microphone
■ Chargers
This device is intended for use when supplied with power from the DC-1001
charger.
Warning: Use only chargers approved by Nokia for use with this
particular device. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
When you disconnect the power cord of any enhancement, grasp and pull the
plug, not the cord.
■ Charge the battery
Before charging the battery, carefully read “Battery information,” p. 50.
12
Get started
1. Connect the charger to the mini USB port on the navigation device,
and insert the charger plug into the cigarette lighter socket of your
car.
Power must be supplied by the 12 V car battery. Ensure that the
charger is properly inserted in the cigarette lighter socket and does
not interfere with the normal operation of the car.
In some car models, the cigarette lighter socket is powered by the car
battery even when you remove the ignition key. In those cases, the
car battery might be discharged if the navigation device is left on, or
if the device is turned off but connected to the cigarette lighter
socket for a long time. Contact the vehicle manufacturer for more
information.
The indicator light is orange during charging. If charging does not
start, disconnect the charger, and plug it in again.
2. When the battery is fully charged, the indicator light turns green.
Disconnect the charger from the cigarette lighter socket.
If you use the TMC (traffic message channel) service with the
navigation device, keep the charger connected to the navigation
device as the charger includes the TMC antenna.
When battery power is low, the indicator light is red, the battery icon
shows one bar or no bars, and a text about low battery is displayed.
■ First use
To switch on the navigation device for the first time, slide the main
power switch to the right.
When you are asked to calibrate the screen, tap and briefly press the
displayed crosshair with your finger. Repeat this as the crosshair moves
around the screen. To calibrate the screen later, see “System,” p. 24.
When you are asked to select the language, tap the desired language
and . The language is used for display texts and spoken navigation
instructions.
Carefully read and accept the displayed safety notice, and tap the right
arrow. (To hide this screen in the future, tap the related selection box.)
13
Get started
The Navigator application starts and the map view is displayed. Now you
can start to use the device.
Next, set the time and date. See “Adjust device settings,” p. 23.
To pair and connect the navigation device with a compatible mobile
phone using Bluetooth wireless technology, see steps 2 to 5 in “Set up
Bluetooth connection,” p. 15.
When you are asked to download the contacts from your phone to the
navigation device, tap Yes to start the download. If you select No, you
cannot use the contacts saved in your phone with the navigation device.
In this case, to download the contacts later, press the menu key, and tap
Phone > Contacts > Yes.
■ Switch on or off and standby mode
The navigation device has a main power switch to turn the device on or
off and a power key to set the device into the standby mode.
In daily use, use the standby mode instead of switching the device off.
This way the device starts up faster.
You only need to switch off the device when you do not intend to use it
for a longer time.
Switch on or off
To switch on, slide the main power switch to the right.
To switch off, slide the main power switch to the left.
Standby mode
To save battery power when you are not using the device, set it to the
standby mode. Press and hold the power key for about 3 seconds. The
screen turns off.
To exit the standby mode, press and hold the power key for about 3
seconds.
14
Get started
Bluetooth connection at startup
When you switch on the device or exit the standby mode, you are asked
whether you want to connect the device to the previous mobile phone.
To connect to the previous phone, tap its name. The map screen is
displayed.
To connect to some other device, tap Other. The Phone connections
screen is displayed. Tap the desired device and Connect. To download
the contacts saved in the other device, tap Yes.
To pair with a new device, in Phone connections, tap Pair new, and
proceed as instructed in steps 4 to 5 in “Set up Bluetooth connection,”
p 15.
■ Set up Bluetooth connection
You can connect the navigation device to a compatible mobile phone
using Bluetooth wireless technology.
To pair and connect the navigation device with your device, do as
follows:
1. Switch on the navigation device and your mobile phone.
2. Activate the Bluetooth feature on your phone. See the user guide of
your phone for instructions.
3. On the navigation device, press the menu key, and tap Phone.
If the Bluetooth feature is not active in your phone, you are asked if
you want to activate it. Tap Yes.
4. When the device asks you to start pairing from your phone, set your
phone to search for Bluetooth devices, and select the navigation
device (Nokia PND) from the list of found devices on your phone.
5. Enter the passcode 0000 on your phone to pair and connect the
navigation device to it.
In some phones you may need to make the connection separately
after pairing. See the user guide of your phone for details.
You only need to pair the navigation device with your phone once.
15
Get started
If the navigation device was connected to your phone, the Bluetooth
name of the device is displayed. You can define the Bluetooth name in
your phone. The navigation device is shown in the menu of your phone
where you can view the currently paired Bluetooth devices.
You can pair the navigation device with up to eight mobile phones but
connect it to only one phone at a time.
Connect manually or change the connected device
To connect the navigation device manually to a paired phone or change
the connected phone, press the menu key, and tap Phone > Settings >
Phone connections. Tap the desired device and Connect.
Connect automatically
You can set your paired phone to allow an automatic connection with
the navigation device when the navigation device is switched on. To do
this in Nokia devices, change your paired device settings in the
Bluetooth menu.
Delete pairings
To delete a device from the paired devices list, press the menu key, and
tap Phone >
. Tap the desired device and Delete > Yes. To delete all
devices, tap Delete all > Yes.
Disconnect a device
To disconnect a device from the navigation device, press the menu key,
and tap Phone >
. Tap the desired device and Disconnect.
Alternatively, you can do one of the following:
• End the connection in the Bluetooth menu of your phone.
• Turn off Bluetooth connectivity in the navigation device.
• Switch off the navigation device.
Turn Bluetooth connectivity on or off
To turn off Bluetooth connectivity when no device is connected to the
navigation device, press the menu key, and tap Phone > Cancel >
16
Get started
To turn off Bluetooth connectivity when a device is connected to the
navigation device, press the menu key, and tap Phone >
> > Yes.
To turn on Bluetooth connectivity, press the menu key, and tap Phone >
> > Yes.
■ Install the device in a car
To install the navigation device in a car, attach the HH-12 mounting
device to the CR-91 mobile holder, attach the mounting holder to the
windscreen, and place the navigation device into the mobile holder.
It is advised that you do not leave the mounting device or the mobile
holder visible in the car to prevent theft when you exit the car.
General safety instructions
Obey all local laws. Always keep your hands free to operate the vehicle
while driving. Your first consideration while driving should be road
safety. Only operate the mounting device, mobile holder, or navigation
device if it is safe to do so under all driving conditions.
When you install the mounting device or mobile holder, ensure that they
do not interfere with or hinder the steering or braking systems or other
systems used in the operation of the vehicle (for example, airbags) or
disturb your field of vision while driving.
Check that the deployment of the airbag is not blocked or impaired in
any way.
Ensure that the mounting device or mobile holder is not installed where
you might come in contact with it in the event of an accident or
collision.
Periodically check that the suction cup at the bottom of the mounting
device is firmly attached to the windscreen, especially if the ambient
temperature changes a lot.
Do not leave the product parts inside the vehicle in direct sunlight or in
excessive heat. The product may be damaged if the operating
temperature falls below -25°C (-13°F) or exceeds +55°C (131°F) or if the
17
Get started
storage temperature falls below -40°C (-40°F) or exceeds + 100°C
(212°F).
Attach mobile holder to mounting device
Attach the mobile holder to the mounting device using the supplied
screw (1), and snap the supplied protection plate with the "Nokia" text
over the screw.
Attach mounting device to windscreen
Locate a safe mounting surface on the windscreen, and clean the
surface thoroughly with a glass cleaner and a clean towel. If the
ambient temperature is low, you may need to warm the windscreen to
improve the grip.
Press the suction cup firmly on the windscreen, and carefully push the
locking lever above the cup toward the cup to create a vacuum between
18
Get started
the cup and the windscreen (2). Check that the suction cup is firmly
attached.
If you want to detach the mounting device from the windscreen,
carefully push the locking lever toward the top of the mounting device,
and pull the strap located on the edge of the suction cup.
Place navigation device into holder
To place the navigation device into the mobile holder, insert the catches
at the bottom of the holder into the recesses at the bottom of the device
(3).
Press the navigation device toward the back of the holder so that the
catches on the two arms of the holder click into the corresponding slots
at the sides of the device (4). Ensure that the screen is clearly visible for
the user.
If you want to release the navigation device from the mobile holder,
push the arms of the holder.
Set navigation device to desired position
Do not adjust the mounting device while driving.
To set the navigation device to the desired vertical position, loosen the
two screws at the sides of the mounting device, turn the navigation
device to the desired position, and tighten the screws (5).
To set the navigation device to the desired horizontal position, loosen
the screw below the mounting device, turn the navigation device to the
desired position, and tighten the screw (6).
Ensure that the navigation device is firmly locked into place.
■ Memory card
The device comes with a memory card and an adapter. You can only use
memory cards formatted with the FAT or FAT32 file system with this
device.
The device supports the SDHC (SD High-Capacity) standard that allows
for the use of memory cards of up to 16 gigabytes.
19
Get started
Use only compatible SD cards approved by Nokia for use with this device. Nokia
uses approved industry standards for memory cards, but some brands may not be
fully compatible with this device. Incompatible cards may damage the card and
the device and corrupt data stored on the card.
Insert the card
Slide the memory card into the adapter in the direction marked on the
card so that the label sides of the card and adapter point up.
Insert the memory card into the memory card slot so that the bevelled
corner points to the top of the device. Carefully push the memory card
into the slot until it locks into place.
To remove the memory card, switch off the device, and push the card
until it pops out from the slot.
Important: Do not remove the memory card in the middle of an
operation when the card is being accessed. Removing the card in the
middle of an operation may damage the memory card as well as the
device, and data stored on the card may be corrupted.
Copy files to the card
To play music, view photos, watch videos, or use maps with the
navigation device, you must copy these files to the memory card from a
compatible PC. You can do this while the card is inserted in the
navigation device or the PC. Before copying data to the memory card,
check that the card is not locked.
The Cities folder on the memory card is needed for the use of the
Navigator application. Do not modify or delete it manually. If needed,
you can restore the folder from the supplied DVD.
To copy files to the memory card from the supplied DVD, see “DVD,” p. 9.
To copy files to the memory card from a PC, do either of the following:
• To copy files to the memory card inserted in the navigation device,
first check that the operating system in your PC supports USB mass
storage devices. Such operating systems are, for example, Microsoft
Windows 2000, Windows XP, and Windows Vista.
20
Get started
Plug one end of the supplied DKE-2 USB data cable to the mini USB
port on the device and the other end to a compatible USB port on the
PC.
The operating system detects the navigation device as a mass
storage device, and Mass storage mode is displayed on the
navigation device. Copy the files from the PC to the navigation
device as instructed in the documentation of the operating system.
When the navigation device is connected to the PC with the DKE-2
cable, the battery of the device is charged from the PC.
• To copy files to the memory card inserted in a PC, remove the card
from the navigation device, and insert it into the memory card reader
on your PC. Copy the files as instructed in the documentation of the
PC and its operating system. Remove the card from the PC, and insert
it into the navigation device.
21
Basic operation
3. Basic operation
■ Touch screen
To use most features of the device, tap the screen with your finger.
Important: Avoid scratching the touch screen. Never use a pen or
pencil or other sharp objects to write on the touch screen.
■ Open applications from map screen
When you switch on the device, the map screen is displayed. This screen
shows the map view of the Navigator application.
The device includes the following applications:
• Navigator (
) for GPS navigation (see p. 26)
• Phone ( ) to make and answer calls using the mobile phone
connected to the device (see p. 38)
• Music (
) to play songs saved on the memory card (see p. 43)
• Gallery ( ) to view photos and watch video clips saved on the
memory card (see p. 46)
• Setup ( ) to adjust settings and view information about the device
(see “Adjust device settings,” p. 23, and “Adjust phone settings,”
p. 41).
To show or hide the main application menu, press the menu key. To open
an application from the menu, tap its icon.
To return to Navigator from other applications, press the menu key.
To return to the previous screen in any application, tap
The following indicators are shown in the map screen:
The signal strength of the GPS antenna is good.
The signal strength of the GPS antenna is not sufficient for
navigation.
The battery is fully charged.
22
Basic operation
The battery charge is low.
If this indicator is blue, Bluetooth connectivity is turned on but
the navigation device is not connected to a compatible device.
If this indicator is grey, Bluetooth connectivity is turned off.
The navigation device is connected to a compatible device.
■ Adjust the volume
To adjust the volume for the current application, press (or press and
hold) the volume up (+) or down (-) key.
■ Adjust device settings
To adjust device settings, press the menu key, and tap Setup.
Audio volume and key tones
To set the volume for navigation instructions, calls, or entertainment
features (music player and video player) or to turn the key tones on or
off, tap Audio volume. To set the volume, tap + or - in the desired field;
to turn the key tones on or off, tap and the current key tone setting.
When you have made the settings, tap .
Language
To select the language for the display texts of the device, tap Language.
Tap or to scroll through the languages. Tap the desired language
and .
To install a new language to the device, see “DVD,” p. 9. You can only
select the device language from the languages that you have chosen for
Navigator.
Backlight
To adjust the screen backlight or turn the energy saver on or off, tap
Backlight.
• To set the backlight level, in Backlight, tap + or -.
23
Basic operation
• To set the time after which the backlight turns off if the device is not
used, in Energy saver (battery), tap + or -. If you select Never, the
backlight does not automatically turn off.
Time and date
To define the time and date settings, tap Time & date. Tap
scroll through the settings.
or
to
• To set the time, tap the time in Time. Tap the hour, minute, or second
field at the top of the displayed keypad. To enter the time, tap the
digits, or tap + or -, and tap
to save the setting.
• To set the date, tap the date in Date. Tap the year, month, or day field
at the top of the keypad. To enter the date, tap the digits or + or -,
and tap .
• To select the time zone, tap the current setting in Time zone, the
desired region according to your location, and .
• To turn daylight saving on or off, in Daylight saving, tap the current
setting until the desired option is displayed.
• To select the 12 or 24 hour time format, in Time format, tap the
current setting until the desired option is displayed.
• To select the date format, in Date format, tap the current setting. Tap
the desired format and .
System
To calibrate the screen, to restore the original settings, or to view
information about the device, tap System.
• To calibrate the screen, for example, if it responds inaccurately, tap
Screen calibration. Tap and briefly press the displayed crosshair.
Repeat this as the crosshair moves around the screen.
• To restore the original settings, tap Restore factory settings.
• To view information about the device, tap About. Tap
scroll through the information.
24
or
to
Basic operation
FM transmitter
The device has an FM transmitter that you can use to listen to music
from the Music application through your FM car radio system. The FM
transmitter can also be used for phone calls. To use the FM transmitter
with Music, see p. 43.
To define the settings for the FM transmitter, tap FM transmitter. You
can access the settings also in the Music application by tapping .
• To turn the FM transmitter on or off, tap the current setting in
Activate, and tap the current setting until the desired option is
displayed.
• To save the frequencies that you want to use with the transmitter,
tap the current setting in Adjust channels. Tap the desired memory
location (channel) and . Enter the frequency using the displayed
keypad, or tap + or -. Tap
to save the setting.
• To select the frequency that you want to use with the transmitter,
tap the current setting in Adjust channels and the desired channel.
Due to legal requirements, the FM transmitter automatically turns off if
there is no music or a call active for 1 minute. To use the transmitter,
turn it on.
Some countries may have restrictions on the use of FM transmitters.
Check with your local authorities for more information. You may also
find related information at www.nokia.com or on your local Nokia
website.
■ Reset
To reset the device if it stops functioning, although it is charged, press
the reset key at the base of the device. The reset does not delete the
device settings.
25
Navigator
4. Navigator
The navigation device has an internal GPS receiver that you can use to
detect your current position and for turn-by-turn navigation.
When you switch on the device, the map view of the Navigator
application is displayed. To use navigation, press the menu key, and tap
Navigator. Alternatively, tap .
The device receives signals from a number of GPS satellites to determine
your current position. For GPS satellite navigation, place the device in a
location with an unobstructed view to the sky.
Establishing a GPS connection may take from a couple of seconds to
several minutes. The connection time depends on how well the GPS
receiver can receive satellite signals. Establishing the connection takes
longer if you have not used GPS for several days or are very far away
from the last location you used it.
If the quality of the GPS connection is good, is displayed. If the
connection is not good enough for navigation, is displayed; in this
case, check that the device has an unobstructed view to the sky.
To copy navigation files to the memory card, see “DVD,” p. 9. Copy all the
navigation files to the Cities folder.
■ Map
When the device has a GPS connection, Navigator shows your current
location on a map. The map has two modes: tracking mode and
browsing mode.
26
Navigator
Tracking mode
In the tracking mode, the map follows your GPS position and displays
the following information:
1. Current speed
2. Time
3. Elevation above mean sea level
4. Geographic coordinates
5. Number of GPS satellites to which the device is connected
6. Compass rose
7. Name of the current position
8. Current GPS position
9. Zoom out
10.Zoom in
To browse the map, tap the map to go to the browsing mode.
27
Navigator
Browsing mode
In the browsing mode, the bottom of the screen is orange, and north is
on the top. The map displays the following information:
1. Compass rose
2. Name of the current position
3. Current GPS position
4. Cursor
5. Zoom out
6. Zoom in
To select a location on the map, zoom the map in or out if necessary, and
move the map with your finger until the cursor points to the desired
location. Tap
and the desired option. You can navigate to the
location, add it to a route (Via), save it as a bookmark, or search for
points of interest around it. You can also change the map settings.
To select a point of interest on the map, move the cursor over the point
of interest with your finger. The icon for the point of interest is displayed
within brackets, and the name and phone number of the point of
interest are shown. Tap
for the available options.
To return to the tracking mode or the navigation screen, tap
28
Navigator
■ Navigate to a destination
To navigate to a destination, press the menu key, and tap Navigator >
Destination and one of the following:
• Address — you can enter the address of the destination. See “Navigate
to an address,” p. 31.
• Recent — you can navigate to a recently visited location. See “Recent
locations,” p. 33.
• Favourites — you can navigate to a location that you have saved as a
favourite. See “Favourites,” p. 32.
• Contacts — you can navigate to an address saved with a name in
your phonebook (if it contains addresses). Tap the first few letters of
the desired name using the displayed keypad. A list of the first
corresponding names are shown at the top. Tap
or the list. Tap
the desired name and Navigate.
• POI search — you can search for the desired point of interest. See
“Navigate to a point of interest,” p. 31.
After you have set up the destination, tap
calculates the route to the destination.
and Navigate. The device
29
Navigator
Navigation screen
After the device has calculated the route to the destination, the
navigation screen is displayed:
1. Next street
2. Route
3. Next turn and distance to it
4. Current speed
5. Estimated time of arrival to the destination
6. Distance to the destination
7. Average speed (if this function is set to on)
8. Compass rose
9. Current street
10.Current position and direction
11.Zoom out
12.Zoom in
When you come to a turn or other manoeuvre, you hear a related voice
instruction. Turns and other manoeuvres are indicated with red arrows
on the map.
30
Navigator
For one-way streets, the allowed direction is indicated with a blue
arrow.
To browse the map, tap it. To stop the navigation, tap
Functions available in navigation screen
To use the functions available during navigation, tap
the following:
. You can do
• To block the calculated route for the desired distance and force an
alternative route, tap Alt. route.
• To view the manoeuvres along your route as a waypoint list, tap
Waylist.
• To save your current position as a bookmark, tap Save. See also
“Bookmarks,” p. 33.
• To mute or set the volume for voice instructions, tap Volume.
• To view a list of relevant traffic incidents, tap Traffic info. See also
“Traffic information (TMC),” p. 35.
• To search for a point of interest, tap Search. See also “Navigate to a
point of interest,” p. 32.
• To adjust some navigation settings, tap Settings (see “Navigation
settings,” p. 35). To switch from the map view to the icon-based
view, tap Map settings > Map (Arrows is displayed). When Arrows is
active, the navigation screen displays a big next turn icon, distance
to the destination, and a progress bar that indicates the distance to
the next turn.
• To turn the speed limit warner on or off, tap Start or Stop.
Navigate to an address
To search for an address to which you want to navigate, press the menu
key, and tap Navigator > Destination > Address. To select the country,
city (or postal code), street, and house number (optional), tap the fields
one by one, and enter the information in this order using the displayed
keypad.
31
Navigator
When you use the keypad, you can only tap the keys that lead to a
search result; other keys are inactive. To delete the last character, tap
Clr. You can enter characters until you have narrowed down the search
to only one result, or you can tap
and the desired address on the list.
To scroll through the list, tap the up or down arrow. To narrow down the
search, tap .
When you have found the address, tap
in the Find address screen,
and tap the desired option. You can navigate to the address, add it to a
route (Via), save it as a bookmark, or view it on the map.
Navigate to a point of interest
You can search for a point of interest located near the desired location.
To navigate to a point of interest, press the menu key, and tap
Navigator > Destination > POI search. The start point (usually your
current location) of the search is shown at the top of the screen. To
change the start point, tap Where? and then Address to enter the
address, Favourites to select a previously saved address, or GPS position
to set your current location as the start point.
Tap the category and subcategory for the point of interest. Alternatively,
tap , enter the name of the point of interest, and tap .
A list of found points of interest is displayed. The list is sorted by the
distance to the start point. Tap the desired point of interest and option.
Favourites
To navigate to or manage destinations that you have saved as
favourites, press the menu key, and tap Navigator > Destination >
Favourites and one of the following: Home and work (your home or work
address), Bookmarks (previously saved addresses), or Trips.
Home and work addresses
To define a home or work address, in Favourites, tap Home and work. Tap
the desired field and option. You can enter the address, set your current
position as the address, or select the address from the list of recent
locations.
32
Navigator
To edit an address, tap the address and Edit.
To use other available options, tap the address and the desired option.
You can navigate to the address, add it to a route (Via), view it on the
map, delete it, or delete all the addresses.
Bookmarks
To manage the destinations that you have saved as bookmarks, in
Favourites, tap Bookmarks.
Tap a destination on the bookmark list and the desired option. You can
navigate to the destination, add it to a route, view it on the map, delete
or rename it, or sort or clear the bookmark list.
Trips
A trip is a list of 2 to 6 destinations (stopovers). When you select a trip
for navigation, you are guided through the stopovers in the specified
order. To create or manage trips, in Favourites, tap Trips.
To create a new trip, in Manage trip, tap Create a new trip. You do not
need to set up a start point for the trip because the trip is started from
your current GPS position.
• To add a stopover to the trip, tap + and the desired option. To add a
location shown on the map, tap Map, zoom the map in or out if
necessary, drag the map with your finger until the cursor points to
the desired location, and tap . After you have added at least two
stopovers, tap
and the desired option (see the option list in “Plan
a route,” p. 34).
• To delete a stopover from the trip, tap the stopover on the list and
• To move a stopover on the list, tap the stopover, and tap the up or
down arrow.
To edit or use a saved trip, in Manage trip, tap the trip, and select the
desired option. You can start navigation to the first stopover of the trip,
edit the trip, rename or delete the trip, or delete all the saved trips.
Recent locations
To view recently visited locations, press the menu key, and tap
Navigator > Destination > Recent.
33
Navigator
To navigate to a location, add it to a route (Via), tap the location and the
desired option.
■ Plan a route
You can plan your route in advance, also without GPS connection.
To plan a route, press the menu key, and tap Navigator > Destination.
Select the start point for the route in the same way as a destination, and
add it to the route (Via). When you tap Via, Destination list is displayed.
To add a waypoint to the route, tap +, and select the location in the
same way as a destination. To delete a waypoint, tap the desired
location and . The start point of the route is shown at the top of the
list, and the end point is shown at the bottom. To change the order of
the list, tap the waypoint that you want to move and tap the up or down
arrow.
After you have set up the route, tap
for the following options:
• To calculate the route, tap Routing. When the route is calculated, the
start and end points are displayed on the map. After the calculation,
a route summary with the selected waypoints is displayed, with an
estimated travel time and distance for each waypoint and the entire
route. To view a detailed waylist, tap the right arrow. To delete a
waypoint from the waylist, tap it. To view the waypoints on the map,
tap the right arrow. The route is displayed on the map, and the name
of the current waypoint is displayed at the top. To move to the
previous or next waypoint, tap the arrow at the left or right side of
the waypoint name. To return to the previous screen, tap the left
arrow.
• To view a simulation of the route on the map with voice instructions,
tap Simulate.
• To save the waypoint list as a trip, tap Save or Save as. When you
later select the trip for navigation, you are first guided to the first
waypoint of the trip. If you are close to the start point and do not
want to be guided to it, delete the start point before saving the trip.
• To navigate to the first waypoint of the route, tap Navigate.
34
Navigator
■ Traffic information (TMC)
To view a list of traffic incidents along your route during navigation or in
the tracking mode, tap
> Traffic info.. The list is sorted by the
distance to your current position. The list is based on TMC (Traffic
Message Channel) messages that you may receive through the internal
TMC receiver from the local TMC operator. The availability and accuracy
of traffic information depends on the provider of the TMC service. To use
the service, keep the charger connected to the navigation device as the
charger includes the TMC antenna.
The incidents on your route are displayed in red on the list. The following
information can be displayed: the name of the street where the incident
occurred, the incident type, and the distance of the incident place from
your current position. To view the incident place on the map, tap the
incident.
■ Navigation settings
To access the Navigator settings, press the menu key, and tap
Navigator > Settings and one of the following: General settings, Map
settings, Route settings, or Volume.
After you have selected the desired settings in a screen, tap
the settings.
to save
General settings
You can define how the device reacts to TMC messages, set the average
speed for the speed limit warner, select a voice for navigation
instructions (VoiceSkin), select the distance unit, and view the version of
the Navigator application.
To define how the device reacts to TMC messages, tap the TMC icon
until the desired option is displayed. If you select Automatic, the device
automatically guides you to the suggested alternate route around the
traffic incidents on your route. If you select Manual, the device alerts
you about traffic incidents and asks if you want to use an alternate
route. If you select Off, the device shows traffic information but does
35
Navigator
not suggest an alternate route. See also “Traffic information (TMC),”
p. 35.
To select a male or female voice for navigation instructions, tap
VoiceSkin and the desired voice. (To select the language, see
“Language,” p. 23.) In some languages, you can select a text-to-speech
skin (indicated with "TTS") that allows you to hear street names, house
numbers, names of motorway exits, and city names during navigation.
When you select a text-to-speech skin, voice instructions are longer.
Map settings
To select which categories for points of interests can be displayed as
icons on the map, tap Info layers, the desired categories, and .
To select the day or night mode or to set the device to automatically
select the mode, tap the corresponding icon until the desired option is
displayed. If you select Automatic, the mode is selected depending on
the current time.
To select a map, tap Maps. If you have maps for several regions on your
memory card, tap the name of the map that you want to use. To use the
map for navigation, you need a license for it. If you do not have the
license, you can browse the map, view your position on it, search for a
destination (but not navigate to it), and use routing.
To use 2D or 3D effects for the map, tap the corresponding icon.
To set the map to point to the current direction (Track up) or to the top
of the screen (North up), tap the corresponding icon.
Route settings
You can select the mode of transportation or the fastest or shortest
route, and allow or avoid toll roads, motorways, or ferries. To select an
option, tap the corresponding icon.
The selected mode of transportation determines which types of roads
the device suggests for navigation. You can select from the following
modes:
• Fast — assumes fast driving on highways.
36
Navigator
• Slow — assumes slower driving.
• Bike — takes into account bike paths and restricts highways where
bikes are prohibited. There are no voice instructions.
• Van — takes into account van restrictions.
• Motorbike — takes into account motorbike restrictions.
• Pedestrian — takes into account pedestrian routing, including access
to one-way streets and pedestrian zones. There are no voice
instructions.
• Scooter — takes into account scooter restrictions.
Volume
To select the default volume for voice instructions, tap + or -. To mute
the instructions, tap . To unmute, tap .
37
Call handling
5. Call handling
If you answer a call when you use the Navigator application, the spoken
navigation instructions are muted until you end the call. To view the
map and minimise the in-call options screen, press the menu key. is
displayed in the top right corner of the screen. To open the in-call
options screen, tap .
If you answer a call when you use the Music application, the current
song is paused until you end the call. If the FM transmitter is turned on,
it is also used for call audio. You can turn on the FM transmitter during
or immediately before a call.
To go to Navigator, press the menu key. If navigation is not active, the
left part of the screen shows two shortcut buttons to Navigator. To
search for an address for navigation, tap Go to. To go to the map view,
tap Map.
■ Make a call
You can use the navigation device for calling if it is connected to a
compatible mobile phone and no call is in progress.
Tap a number using dial pad
1. Press the menu key, and tap Phone > Dial pad.
2. To enter a phone number including the area code, tap the digits one
by one. (To delete the last digit, tap Clr.)
For international calls, tap + for the international prefix (the +
character replaces the international access code), enter the country
code, the area code without the leading 0, if necessary, and the
phone number.
3. To call the number, tap
4. To end the call, or to cancel the call attempt, tap
38
Call handling
Call a saved contact
To call a contact that you have downloaded from your mobile phone,
press the menu key, and tap Phone > Contacts.
Tap the first few letters of the desired name using the displayed keypad.
(To delete the last character, tap Clr.) The first matching names are
shown at the top. To view all the matching names, tap
or the list. If
the list is long, tap or , or tap
to enter more letters. To view the
phone numbers saved with a name, tap the name. To call a phone
number, tap it.
Call register
To view the 20 most recent calls that you have missed, received, or
dialled while using the navigation device with your compatible mobile
phone, press the menu key, and tap Phone > Call register and the desired
option. To scroll through the numbers, tap or . To dial a number,
tap it.
To call the last dialled number, press the menu key, and tap Phone > Dial
pad >
, or tap Phone > Call register > Redial.
To clear the lists of recent calls, tap press the menu key, and tap Phone >
Call register > Clear lists > Clear.
The navigation device registers missed and received calls only if the
network supports these functions and your phone is switched on and
within the network service area.
Voice dialling
To voice dial a number saved in the phonebook of your phone, press the
menu key, and tap Phone > Voice dial. This feature can be used only if
you are not in a call and if your phone supports its use with the
navigation device.
Say the voice tag when you are prompted to do so. For details, see the
user guide of your phone.
39
Call handling
Speed dialling (Favourites)
To speed dial a phone number, press the menu key, and tap Phone >
Favourites when you are not in a call. To make a call, tap the desired
contact.
Assign a speed dialling number
To add a contact to the Favourites view, tap an unassigned button
(indicated with ) and do one of the following:
• To add a contact downloaded from your mobile phone, tap the first
few letters of the desired name, , and the desired name and phone
number.
• To add a phone number by entering it, tap
number, and .
, the digits of the phone
Manage speed dialling numbers
To delete a contact or all contacts from Favourites, tap
desired contact and delete option.
and the
To change a contact in Favourites, tap , the contact that you want to
change, and Replace. Assign a new contact.
■ Answer or reject a call
To answer an incoming call, tap
If you do not answer a call, view the caller’s name or phone number by
tapping Show after the call, if this is allowed by the caller. To call a
number on the list, tap it.
To reject the call, tap
Call waiting
Call waiting is a network service. To use call waiting, your mobile phone
must support the Bluetooth Hands-Free profile 1.5, and call waiting
must be set to on in your phone
To answer a waiting call and put the current call on hold, tap
To switch between the calls, tap Swap. To end both calls, tap End all
calls.
40
Call handling
If you press the menu key to view the map and minimise the in-call
options screen, the number of calls is shown beside .
■ In-call options
You can use some call functions during a call. The available functions
are shown in an in-call options screen that is displayed when you start a
call.
To minimise the in-call options screen, for example, to view the map,
press the menu key during a call. To open the in-call options screen, tap
You can use the following functions during a call:
• To mute the microphone during a call, tap Micro off. To unmute, tap
Micro on.
• To switch a call from the navigation device to your compatible
mobile phone, tap To phone. Some devices may close the Bluetooth
connection until the call ends.
To switch the call back to the navigation device, tap To handsfree, or
use the relevant function on your phone.
• To send DTMF tones (for example, a password) during a call, tap
DTMF. Tap the characters that you want to send as tones. This is a
network service. For availability, contact your service provider.
■ Adjust phone settings
To adjust settings related to Bluetooth connections, contacts, or calls,
press the menu key, and tap Phone > Settings. Tap or to scroll
through the settings.
Phone connections
To connect the navigation device to a paired mobile phone, tap the
current setting in Phone connections. Tap the desired device, or tap Pair
new to pair the navigation device with a new device.
41
Call handling
Bluetooth
To turn the Bluetooth feature on or off, in Bluetooth, tap the current
setting until the desired option is displayed.
Contacts download
To download contacts from the currently connected mobile phone, tap
the download status in Contacts download and Yes.
The download status can be Not done (contacts have not been
downloaded from the device), In progress (contacts are being
downloaded), or Finished (contacts have been downloaded).
Sort order of contacts
To set the sort order of contacts, in Sort order of contacts, tap the
current setting until the desired option is displayed.
Ringing tone
To select the ringing tone for incoming calls, in Ringing tone, tap the
current setting. A list of available tones is displayed. Tap the desired
tone and Play to listen to it or Set as ringtone to activate it.
Some mobile phones play their own ringing tone instead of the one that
you select here.
Ringing volume
To set the volume for the ringing tone, in Ringing volume, tap + or -.
42
Music player
6. Music player
To play songs that you have saved on the memory card, press the menu
key, and tap Music.
To copy files to the memory card, see “Memory card,” p. 19. To easily
find the songs in the Music application, copy them to the Music folder.
The application supports the MP3, WMA, AAC, and eAAC+ file formats.
However, the application does not necessarily support all the variations
of these formats.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
■ Use FM transmitter or headphones
You can listen to the music player from your car radio system or
compatible headphones. To listen to music through your car radio
system, use the built-in FM transmitter.
FM transmitter
To hear the played songs from your car radio system, tap
in the
player screen. If the transmitter is off, turn it on. To select the
transmission channel, tap Adjust channels and the desired channel.
Select the same FM frequency on your car radio, and set the car radio
43
Music player
volume to the desired level. You should hear the music from your car
radio system.
The use of the FM transmitter increases the demand on battery power
and reduces the battery life.
Headphones
The navigation device has a stereo audio-out connector for compatible
headphones with a 3.5-mm plug. The connector is compatible with 32ohm or higher impedance headphones.
■ Listen to music
To open a music folder, tap
the songs, tap or .
and the desired folder. To scroll through
To select a song to play, tap it. You can select several songs if you want.
(To deselect a song, tap it.) To select all the songs in the current folder
and its subfolders, tap . (To deselect, tap .) To return to the upper
menu level, tap .
To play the selected song or songs, tap
Warning: Listen to music at a moderate level. Continuous
exposure to high volume may damage your hearing.
To pause playing, tap
. To resume playing, tap
To skip to the next selected song, tap . To skip to the previous song or
the beginning of the current song, tap .
To mute the music, tap
key.
. To unmute, tap
, or press either volume
To scroll through the song, move the slider shown below the song title.
To adjust the volume, press either volume key.
To play the song continuously, tap . The icon turns green. To play the
song only once, tap the same icon. The icon turns white.
To play the songs in a random order, tap
. The icon turns green. To
play the songs in the normal order, tap the same icon. The icon turns
white.
44
Music player
To delete a song from the memory card, tap
song that you want to delete, and .
To close the music player, tap
in the player screen, the
■ Exit to navigation screen
To go to Navigator while listening to music, press the menu key, or tap
. The music continues to play in the background. To return to the
music player, press the menu key, and tap Music.
If navigation is not active, the left part of the screen shows two shortcut
buttons to Navigator. To search for an address for navigation, tap Go to.
To go to the map view, tap Map.
45
Video player
7. Video player
To watch video clips that you have saved on the memory card, press the
menu key, and tap Gallery > Videos.
To copy files to the memory card, see “Memory card,” p. 19. To easily
find the video clips in the Videos application, copy them to the Video
folder.
The application supports the MPEG-4, 3GP, and WMV file formats.
However, the application does not necessarily support all the variations
of these formats.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
■ Watch video clips
To open a video folder, tap
the videos, tap or .
and the desired folder. To scroll through
To select a video to watch, tap it. You can select several videos if you
want. (To deselect a video, tap it.) To select all the videos in the current
folder and its subfolders, tap . (To deselect, tap .) To return to the
upper menu level, tap .
To watch the selected video or videos, tap
When the video is playing, you can do the following:
46
Video player
• To pause playing, tap
tap .
. To resume playing, tap
• To play the next or previous video, tap
or
. To stop playing,
• To view the video in full screen or to return to normal view, tap the
video.
• To play the video continuously, tap . The icon turns green. To play
the video only once, tap the same icon. The icon turns white.
To return to the previous screen, tap
To close the video player, tap
To go to Navigator, press the menu key.
47
Image viewer
8. Image viewer
To view images that you have saved on the memory card, press the menu
key, and tap Gallery > Images.
To copy files to the memory card, see “Memory card,” p. 19. To easily
find the images in the Images application, copy them to the Photos
folder.
The application supports the JPEG, BMP, PNG, and GIF file formats.
However, the application does not necessarily support all the variations
of these formats.
■ View images
To open an image folder, tap
the images, tap
or .
and the desired folder. To scroll through
To select an image to view, tap it. You can select several images if you
want. (To deselect an image, tap it.). To select all the images in the
current folder and its subfolders, tap . (To deselect, tap .) To return
to the upper menu level, tap .
To view the selected image or images, tap
When the image is displayed, you can do the following:
• To zoom in the image, tap
48
. To zoom out, tap
Image viewer
• To view the image in full screen, tap
. Tap the left side of the
image to view the previous image or the right side to view the next
image.
To return to normal view, tap the middle of the image.
• To rotate the image by 90 degrees, tap
• To view images as a slide show, select several images, and tap
return to normal view, tap the displayed image.
To delete an image from the memory card, tap
the image that you want to delete, and .
To return to the previous screen, tap
To close the image viewer, tap
. To
in the image screen,
To go to Navigator, press the menu key.
49
Battery information
9. Battery information
This device has an internal, nonremovable, rechargeable battery. Do not attempt
to remove the battery from the device as you may damage the device. The battery
can be charged and discharged hundreds of times, but it will eventually wear out.
Recharge your battery only with Nokia approved chargers designated for this
device. Use of an unapproved charger may present a risk of fire, explosion,
leakage, or other hazard.
If a battery is being used for the first time or if the battery has not been used for a
prolonged period, it may be necessary to connect the charger, then disconnect
and reconnect it to begin charging the battery. If the battery is completely
discharged, it may take several minutes before the charging indicator appears on
the display.
Unplug the charger from the electrical plug and the device when not in use. Do
not leave a fully charged battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery will lose its charge over
time.
Always try to keep the battery between 15°C and 25°C (59°F and 77°F). Extreme
temperatures reduce the capacity and lifetime of the battery. A device with a hot
or cold battery may not work temporarily. Battery performance is particularly
limited in temperatures well below freezing.
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged.
Never use any charger that is damaged.
50
Care and maintenance
Care and maintenance
Your device is a product of superior design and craftsmanship and should be
treated with care. The following suggestions will help you protect your warranty
coverage.
• Keep the device dry. Precipitation, humidity, and all types of liquids or
moisture can contain minerals that will corrode electronic circuits. If your
device does get wet, allow it to dry completely.
• Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
• Do not attempt to open the device.
• Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
• Do not paint the device. Paint can clog the moving parts and prevent proper
operation.
• Unauthorised modifications or attachments could damage the device and
may violate regulations governing radio devices.
These suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorised service facility for service.
Disposal
The crossed-out wheeled-bin symbol on your product, literature, or
packaging reminds you that all electrical and electronic products,
batteries, and accumulators must be taken to separate collection at the
end of their working life. This requirement applies to the European Union and
other locations where separate collection systems are available. Do not dispose
of these products as unsorted municipal waste.
By returning the products to collection you help prevent uncontrolled waste
disposal and promote the reuse of material resources. More detailed information
51
Care and maintenance
is available from the product retailer, local waste authorities, national producer
responsibility organizations, or your local Nokia representative. For the product
Eco-Declaration or instructions for returning your obsolete product, go to
country-specific information at www.nokia.com.
52
FCC/Industry Canada notice
FCC/Industry Canada notice
NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter. NOTE: Changes or modifications not expressly approved by Nokia
could void the user's authority to operate the equipment.
Your device may cause TV or radio interference (for example, when using
a telephone in close proximity to receiving equipment). The FCC or
Industry Canada can require you to stop using your device if such
interference cannot be eliminated. If you require assistance, contact
your local service facility.
This Class B digital apparatus complies with Canadian ICES-003.
53

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2007:08:20 00:58:03Z
Creator Tool                    : FrameMaker 7.2
Modify Date                     : 2007:10:24 09:27:22-04:00
Metadata Date                   : 2007:10:24 09:27:22-04:00
Format                          : application/pdf
Creator                         : cfilion
Title                           : PD-17_UG_en1_with_FCC&IC_notice.fm
Document ID                     : uuid:8f462cd8-29b9-48f2-a2cf-efa166645454
Instance ID                     : uuid:199974a5-af9f-45d8-a50f-005574b99409
Page Count                      : 53
Author                          : cfilion
EXIF Metadata provided by EXIF.tools
FCC ID Filing: OW3PD-17

Navigation menu