Microsoft RH-13 Dual Band, 5-Mode Cellular Telephone User Manual 831 Exhibit08 01

Microsoft Mobile Oy Dual Band, 5-Mode Cellular Telephone 831 Exhibit08 01

UserManual.wiki >

Microsoft >

RH 13 User Manual

Set up photos

Nokia 6340iUser GuidePhone notesMy Nokia 6340i information Information sourceMy number Wireless providerPhone serial number (ESN) On back of your phone, beneath the batteryInternational Mobile Equipment Identifier (IMEI)Voicemail number Wireless providerWireless provider customer care Wireless providerMessage center number Wireless providerDefault recipient number (e-mail gateway number) Wireless provider

The wireless phone described in this guide is approved for use in GSM 850/1900, TDMA 800/1900, and AMPS networks.LEGAL INFORMATIONPart No. 9355059, Issue No. 1Copyright ©2002 Nokia. All rights reserved. Nokia, Nokia Connecting People, the Nokia Original Accessories logos, Nokia 6340i, Snake II, Pass ‘n Rush, Bumper, and Pairs II are trademarks or registered trademarks of Nokia Corporation. All other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Printed in Canada 09/2002US Patent No 5818437 and other pending patents.T9 text input software Copyright ©1999-2002. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security.The information contained in this user guide was written for the Nokia model 6340i phone. Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLSThis product contains commodities, technology or software exported from the United States in accordance with the Export Administration regulations. Diversion contrary to U.S. law is prohibited.FCC/INDUSTRY CANADA NOTICEYour phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you

require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

[ ii ]5 Your phone’s keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Enter characters and numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276 The Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Open the Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Customize the Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Your phone’s memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Copy Phone book entries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38View service numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 397 Call log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40Call log options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408 Use voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Save your voice mailbox number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Call and setup your voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Automate voicemail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 459 Advanced features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47In-call options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49Send own caller ID with next call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Call forwarding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Voice dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Voice commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54Voice recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 561-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58International dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5910 Customize your phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Set the display language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60USE A SCREEN SAVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Accessibility options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Optional headsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67Download a ringing tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

[ iii ]11 Manage phone security . . . . . . . . . . . . . . . . . . . . . . . . . . .70Lock and unlock the keypad (Keyguard) . . . . . . . . . . . . . . . . . . . . . . . . .70Security levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70Fixed dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71Access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7312 Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76Tips for composing a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77Write and send a text message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80Read messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80E-mail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82Picture messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86Organize messages with folders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88Erase messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9013 Your personal organizer . . . . . . . . . . . . . . . . . . . . . . . . . . .91Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91Make a to-do list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96Wallet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97Create a Wallet card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100Set the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105Use the Calculator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10614 Your phone and other devices . . . . . . . . . . . . . . . . . . . . .109Infrared basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109Send and receive information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110Business cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110PC Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11215 The wireless Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . .114The Services menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114WAP settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115Launch the browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115On-line purchases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

[ iv ]16 Fun and games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Games main menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Start a game. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12317 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12418 Reference information. . . . . . . . . . . . . . . . . . . . . . . . . . . 127Batteries and chargers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127Important safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12919 Care and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . 135Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13620 Frequently Asked Questions (FAQ)13721 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13922 Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . 14323 Nokia One-Year Limited Warranty. . . . . . . . . . . . . . . . . . 144Appendix A Message from the CTIA. . . . . . . . . . . . . . . . . . . . . . . . . . 149Appendix B Message from the FDA . . . . . . . . . . . . . . . . . . . . . . . . . . 153Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160

1[ 1 ]Safety first1 Safety firstRead these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this manual.Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger. ROAD SAFETY COMES FIRSTDon't use a hand-held phone while driving. INTERFERENCEAll wireless phones may get interference, which could affect performance.SWITCH OFF IN HOSPITALSFollow any regulations or rules. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTWireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELINGDon't use the phone at a refuelling point. Don't use near fuel or chemicals.SWITCH OFF NEAR BLASTINGDo not use your phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.USE SENSIBLYUse only in the normal position. Don't touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair phone equipment.OBSERVE INFRARED PRECAUTIONSDo not point the IR beam at anyone’s eyes or allow it to interfere with other IR devices.

[ 2 ]1ACCESSORIES AND BATTERIESUse only approved accessories and batteries. Do not connect incompatible products.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user's guide for detailed safety instructions. Do not connect incompatible products.BACKUP COPIESRemember to make backup copies of all important data.WATER-RESISTANCEYour phone is not water-resistant. Keep it dry.CALLINGEnsure the phone is switched on and in service. Enter the phone number, including the area code, then press . To end a call, press . To answer a call, press .EMERGENCY CALLSMake sure the phone is switched on and in service. Press and hold to return to the Start screen where an emergency call can be made. Enter the emergency number and press . Give your location. Do not end the call until told to do so. • ABOUT ACCESSORIESCheck the model number of any charger before use with this device. This device is intended for use when supplied with power from ACP-7U and ACP-8U chargers.Warning: Use only batteries, chargers and accessories approved by the phone manufacturer for use with this particular phone model. The use of any other types may invalidate any approval or warranty applying to the phone, and may be dangerous. For availability of approved accessories, please check with your dealer. When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.

[ 3 ]Quick guide22 Quick guide Make a call Enter phone number, press Answer a call Press Answer a call with call waiting Press or Options and select Answer callEnd a call Press Ignore a call Press Silence when your phone ringsRedial Press twiceAdjust call volume Press up or down on the side volume keyUse the in-call menu While in a call, press OptionsUse 1-touch dialing Press and hold any key 2 through 9 Save a name and number Enter a number, press Options and select Save, then enter a name and press OKRecall a name/number Press Names,select Find. Enter name and press Find or ListRecall a name/number during a call Press Options, scroll to New call, press Select, press Find,enter the first letter of the name to findCheck voice mail Press and hold OR dial your voice mailbox numberSend a text message Press Menu 01-1. After a pause, write the message.Press Options, scroll to Send, press Select, enter the recipient’s number, press OKSend an e-mail message Press Menu 01-2. Select Write e-mail, enter the recipient’s address, press OK, enter the subject, press OK,write the message, press Options, select Send e-mail,enter the Gateway number, press OKRead new message Press Show, then press SelectReply to a message Press Options, select Reply, write the reply, press Options,select Send, and press OKReply to an e-mail message Press Options, scroll to Reply, press OK, choose As e-mail, press Select, then follow instructions for sending an e-mailSend a business card Recall a name from the Phone book. Press Details, then press Options, select Send bus. card, select Via text msg.Enter the recipient’s number or press Find to retrieve a number from the Phone book. Press OK.

[ 5 ]Welcome to Nokia33Welcome to NokiaCongratulations on your purchase of the Nokia 6340i mobile phone. The Nokia 6340i can be connected to a PC, laptop, or other device using the data cable or built-in IR port. For more information, please refer to the PC Connectivity Guide.The PC Connectivity Guide, Nokia PC Suite, and all related software can be downloaded from the U.S. Mobile Phone products section of www.nokia.com. • GET THE MOST OUT OF THIS GUIDEThe tips that follow can help you get the most from this guide as you learn to use your phone.Follow graphic cluesIcons appear throughout this guide to alert you of important information or to provide useful tips.Tip: Indicates a shortcut or alternate method of doing something.Note: Explains a feature or points out an important concept.Important: Indicates critical information on using a feature.Caution: Warns you when you may lose information.Warning: Helps you avoid personal injury, damage to the phone, or property damage.Look for updatesFrom time to time, this guide is updated to reflect changes. The latest version may be available at the U.S. Mobile Phone products section of www.nokia.com.Also, an interactive version of this guide may be available at www.nokiahowto.com.

[ 7 ]Welcome to Nokia3 • BEFORE YOU CONTACT NOKIAIf you need help, Nokia Customer Care is available for assistance. Before calling, however, please read “Frequently Asked Questions (FAQ)” on page 137.We also recommend that you write down the following information on the inside cover of this guide and have it available if you call. The information can be found on your phone’s label, which is on back of the phone, beneath the battery.• The International Mobile Equipment Identifier (IMEI)• The Electronic Serial Number (ESN)We also ask that you write down your zip code.Have your phone or accessory handyPlease have your phone or accessory with you when contacting either of the numbers below.Nokia Customer Care Center, USA Customer Interaction Center, CanadaNokia, Inc.7725 Woodland Center Boulevard Suite #150Tampa, Florida 33614Tel: 1-888-NOKIA-2U (1-888-665-4228)Fax: 1-813-249-9619TTY/TDD Users Only:1-800-24-NOKIA (1-800-246-6542)Nokia Products Ltd.601 Westney Road SouthAjax, Ontario L1S 4N7Tel: 1-888-22-NOKIA (1-888-226-6542)Fax: 1-905-427-1070Informationlabel

3[ 8 ] • DYNAMIC MEMORY USESome features in your Nokia 6340i phone use a common pool of memory (storage capacity) called shared memory. When any of these features is used, there is less available memory for other features, which are also dependent on shared memory. This is especially true with heavy use.For example, entering a large number of Phone book entries may use most of the available shared memory. Consequently, if you attempt to create a calendar note or save a business card, your phone may display a message saying Memory full. To proceed, you would need to delete some of the information or entries occupying the available dynamic memory. • ABOUT THE ANTENNAYour phone has a built-in antenna. As with any other radio transmitting device, avoid touching the antenna while the phone is powered up.Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than necessary.Internal antennaExternal antenna connection

[ 9 ]The Nokia 6340i at a glance44 The Nokia 6340i at a glanceDisplay screenSelection keysEnd keyTalk keyNumber keysEarphoneVolume controlCharger jackScroll keysIR PortPower key+-Headset/TTY/Data cableHDA-8 ConnectorMicrophone

4[ 10 ] • REMOVE THE BACK COVER1With the phone facing away from you, grip the bottom end with one thumb while pressing the cover release with the other.2Slide the cover toward the bottom end of the phone (about 1/4 inch) until it stops. Lift the cover to remove. • INSTALL THE SIM CARDThe SIM slot is between the battery compartment and the bottom end of the phone.Warning: If the battery is in the phone, remove the battery before attempting to install the SIM card. See “Remove the battery” on page 13 for battery removal instructions.Note: The SIM card should be inserted beveled corner first with the gold contacts facing down.• Slide the SIM card into the empty SIM slot until the SIM card retaining latch closes behind the SIM card.Cover release (press in)Empty batterycompartment

[ 11 ]The Nokia 6340i at a glance4 • INSTALL THE BATTERYNote: The SIM card must be installed beforeinstalling the battery.1Position the battery so the gold contacts match up with those on the phone. The battery label should be facing away from the phone.2Insert the battery, contact end first into the battery slot.3Press the other end of the battery into place.4Replace the cover and slide it toward the top of the phone until it locks into place. • CHARGE THE BATTERY1Plug the charger transformer into a standard AC outlet.

4[ 12 ]2With your phone on or off, insert the charger’s output into the round connector at the bottom end of the phone.• After a few seconds, the battery indicator in the display starts to scroll from bottom to top.• When the battery is 80% full, the bar on in the display stops scrolling and Battery full appears (if the phone is on).• Unplug the phone and charger once charging is complete.IMPORTANT BATTERY INFORMATIONImportant:Your phone is powered by a rechargeable battery.Use only batteries approved by Nokia and recharge your battery only with the chargers approved by Nokia. Never use any charger or battery which is damaged.The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery.The BLB-3 battery doesn't need a full discharge before recharging.PROLONG THE BATTERYUse the following guidelines to obtain the best performance from your battery:• With your phone turned off, charge your new battery for three hours before its first use. Use the battery until it is fully discharged. Repeat this procedure twice for a total of three charging cycles.• Note that a new battery's full performance is achieved only after two or three complete charge and discharge cycles. Battery operation time may be less than the estimated times during the first charges. This condition is normal.

[ 13 ]The Nokia 6340i at a glance4• You can use your phone while the battery is charging. However, if the battery is completely empty, it may need to recharge a few minutes before you can make or receive calls or the battery indicator appears.• After the first charge, you can make and receive calls during the charging cycle, but the calls interrupt the charge. When the phone call ends, the charge will resume.• The bars on the screen stop scrolling and remain constant when the phone is fully charged. If you leave the phone connected to the charger, the battery receives an additional charge. If you switch the phone on when charging is complete, the message Battery fullmomentarily appears in the display.Note: The battery will accept a "trickle charge" for an additional two hours.Charging time depends on the charger and battery. For example, charging time for the BLB-3 battery with the ACP-7U charger is about 4 hours. • REMOVE THE BATTERY1Remove the back cover as described on page 10.2Pull the battery out with your fingers from the top end, as shown in the illustration.Warning: Only use your hands to remove the battery. Don’t use an object such as a coin or knife, as either can damage both the phone and the battery.

4[ 14 ] • REMOVE THE SIM CARD1Remove the back cover and battery as described on page 10 and page 13.2Push the SIM card out of the slot as far as you can (about 1/4 of an inch) with your thumb.Note: Keep your thumb in place to prevent the SIM card from sliding back into the slot while you perform the next step.3Pull the SIM card from the open end of the slot with your fingers.Warning: Keep all SIM cards out of reach of small children.

[ 15 ]The Nokia 6340i at a glance4 • SWITCH ON THE PHONE• Press and hold the power key on top of the phone for at least 2 seconds.Warning: Don’t power-up the phone where wireless phone use is prohibited or where the use of the phone could cause interference or danger. • SWITCH OFF THE PHONE• Press and hold the power key on top of the phone for at least 2 seconds. • SET THE TIME AND DATEWhen you power-up your phone for the first time, or when you remove and replace the battery, you’ll be prompted to set the time and date.Note: If “PIN code request” is set to “On,” you’ll need to enter the 4-digit PIN code and press OK. See “PIN code request” on page 74 for more information.1Enter the correct time and press OK.2Enter the correct date and press OK. After a brief pause, the Start screen appears in your display.Power keyInfraredport

4[ 16 ] • THE START SCREENThe Start screen is the “home base” for your phone and indicates it is in idle mode.What’s on the Start screenHOME Your wireless provider’s name may appear here.Signal strength - Left side of the Start screen. A higher bar indicates a stronger signal.Battery charge level - Right side of the Start screen. A higher bar indicates more power in the battery.Menu Press the left selection key ( ) under Menu to enter the menu list.Names Press the right selection key ( ) under Names to enter the Phone book.Press either one of the scroll keys at the Start screen to display any entries in your Phone book.

4[ 18 ]Return to the Start screen from any activity•Press • USE THE SELECTION AND SCROLL KEYSThe left and right selection keys ( ) are beneath each corner of the display. The scroll keys ( ), are centered below the selection keys. A selection key’s function is always defined by the text that appears above it in the display.Press the left selection key ( ) when Menu appears above it to display the Messages menu. Page through the other main menus using the scroll keys ( ).Press the right selection key ( ) when Names appears above it to enter the Phone book.Tip: Press either scroll key ( ) from the Start screen to view any entries in your Phone book.Right selection keyUp scroll keyDown scroll keyLeft selection key

[ 19 ]The Nokia 6340i at a glance4 • THE VOLUME KEYWith the phone facing you, the volume key is located on the left side of the phone.Adjust earpiece volumeWhen you press the volume key, a bar chart appears in the display indicating the present volume level.• Press the top portion of the volume key to increase your call volume. • Press the bottom portion of the volume key to decrease your call volume. • MAKE AND ANSWER CALLSUse the following table as a quick guide for basic functions.Switch the phone onPress and hold the power key on top of the phone for 2 seconds.Warning: Do not power-up the phone when wireless use is prohibited or when the phone may cause interference or danger.Make a call1Enter the area code and phone number.2Press .3Hold the phone with the earpiece over your ear and microphone near your mouth, or connect and use the headset before entering the number.Answer a call When your phone rings or vibrates, press .End a call Press .Volumekey Frontof phone

4[ 20 ] •HELP TEXTThe Nokia 6340i displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 10 seconds. Use the scroll keys to page through the full help text, if necessary. • NAVIGATE YOUR PHONE’S MENUSYou can navigate the menus and submenus in your phone using the scroll method or a shortcut.Use the scroll method1At the Start screen, press Menu. The Messages menu appears in the display. 2Page through the remaining menus using the scroll keys ( ).THE MENU NUMBER AND SCROLL BARAs you page through menus, the menu numberappears in the upper right corner of the display. Ascroll bar with a tab appears below the menu number. This tab moves up or down as you page through the menus, and indicates your position within the menu structure.• When the menu you want appears in the display, press Select.Turn Keyguard on Press Menu . Keyguard prevents accidental calls.Turn Keyguard off Press Unlock .Silence a callORDecline a callYou can mute the ringing tone of an incoming call without terminating the call. Press Silence and the ringing tone is muted. After pressing Silence, you then have the option to Decline the call. When you decline a call, the calling party hears a busy signal.

4[ 22 ]LPS-1 Mobile Inductive LoopsetThe LPS-1 loopset gives hearing-impaired users access to digital telephony. People using a T-coil equipped hearing aid can make and receive calls without noise interference.HOW THE LOOPSET WORKSThe LPS-1 transmits sound to any hearing aid equipped with a T-coil. The sound from the phone is amplified and background noise is eliminated.Wear it around your neck, connect it to your phone, and speak directly toward the microphone on the loopset.For more details, refer to the booklet that comes with the LPS-1.Note: The Loopset can be purchased separately as an accessory.Other accessibility featuresBesides an intuitive interface and TTY/TDD capabilities, other accessibility features of the Nokia 6340i include:• A nib, or raised dot on top of the five key for keypad reference• Tactile feedback whenever you press a key• The ability to send and receive short messages• 1-touch dialing• The ability to amplify higher frequencies using the equalizer function• Caller groups to aid in caller identificationNote: For instructions on setting up accessory profiles, and connecting and using a TTY/TDD device, see “Accessibility options” on page 63.

4[ 24 ]Warning tones. . . . . 3-1-2-7On. . . . . . . . . . . 3-1-2-7-1Off. . . . . . . . . . . 3-1-2-7-2Alert for . . . . . . . . . . 3-1-2-8All calls. . . . . . . 3-1-2-8-1Family. . . . . . . . 3-1-2-8-2VIP . . . . . . . . . . 3-1-2-8-3Friends . . . . . . . 3-1-2-8-4Business . . . . . . 3-1-2-8-5Other . . . . . . . . 3-1-2-8-6Timed. . . . . . . . . . . . . . . . 3-1-3Silent . . . . . . . . . . . . . . . . . . . . 3-2Meeting. . . . . . . . . . . . . . . . . . 3-3Outdoor . . . . . . . . . . . . . . . . . . 3-4Pager . . . . . . . . . . . . . . . . . . . . 3-54 SETTINGS Alarm clock . . . . . . . . . . . . . . . 4-1On. . . . . . . . . . . . . . . . . . . 4-1-1Off . . . . . . . . . . . . . . . . . . 4-1-2Time settings. . . . . . . . . . . . . . 4-2Clock . . . . . . . . . . . . . . . . 4-2-1Show/Hide clock . . . 4-2-1-1Set the time. . . . . . . 4-2-1-2Time format. . . . . . . 4-2-1-324 hour. . . . . . . 4-2-1-3-1am/pm . . . . . . . 4-2-1-3-2Auto update date/time. . 4-2-2On. . . . . . . . . . . . . . . 4-2-2-1Confirm first . . . . . . 4-2-2-2Off . . . . . . . . . . . . . . 4-2-2-3Call settings. . . . . . . . . . . . . . . 4-3Call forwarding. . . . . . . . 4-3-1Fwd all voice calls. . 4-3-1-1Activate . . . . . . 4-3-1-1-1Cancel. . . . . . . . 4-3-1-1-2Check status . . 4-3-1-1-3Fwd if busy . . . . . . . 4-3-1-2Activate . . . . . . .4-3-1-2-1Cancel . . . . . . . .4-3-1-2-2Check status . . .4-3-1-2-3Fwd if not answered 4-3-1-3Activate . . . . . . .4-3-1-3-1Cancel . . . . . . . .4-3-1-3-2Check status . . .4-3-1-3-3Fwd if out of reach. 4-3-1-4Activate . . . . . . .4-3-1-4-1Cancel . . . . . . . .4-3-1-4-2Check status . . .4-3-1-4-3Fwd when not able to take calls . . 4-3-1-5Activate . . . . . . .4-3-1-5-1Cancel . . . . . . . .4-3-1-5-2Set delay . . . . . .4-3-1-5-310 sec. . . . . .4-3-1-5-3-115 sec. . . . . .4-3-1-5-3-220 sec. . . . . .4-3-1-5-3-325 sec. . . . . .4-3-1-5-3-430 sec. . . . . .4-3-1-5-3-5Fwd all fax calls . . . 4-3-1-6Activate . . . . . . .4-3-1-6-1Cancel . . . . . . . .4-3-1-6-2Check status . . .4-3-1-6-3Fwd all data calls . . 4-3-1-7Activate . . . . . . .4-3-1-7-1Cancel . . . . . . . .4-3-1-7-2Check status . . .4-3-1-7-3Cancel all callforwarding. . . . . . . . 4-3-1-8Equalizer. . . . . . . . . . . . . 4-3-2Normal. . . . . . . . . . . 4-3-2-1Bright. . . . . . . . . . . . 4-3-2-2Dark . . . . . . . . . . . . . 4-3-2-3Loudness . . . . . . . . . 4-3-2-4

[ 27 ]Your phone’s keypad55 Your phone’s keypad • ENTER CHARACTERS AND NUMBERSNote: The following focuses on entering text into messages, but applies to any screen that accepts keypad entry, such as web addresses or names in the Phone book.1At the Start screen, press Menu 01-1(Messages - Write message). The message entry screen opens in text entry mode. 2To enter numbers, press and hold until the Abc icon in the upper left corner of the display changes from Abc to 123.Note: There are three types of text entry modes:•ABC - Any text you enter is capital letters•Abc - The first letter of each sentence is capitalized•abc - Any text you enter is lower caseEnter text• Press any key once to insert the first letter on the key, twice for the second letter, and so on. When you pause, the letter appearing in the display is accepted and your phone awaits the next entry.• Press to accept a word and enter a space• Press to enter a period (.)• Press to display special characters. More about special characters on the following pages•Press Clear to backspace and erase a character•Press and hold Clear to backspace continuously, and erase• Use predictive text to write messages faster. See “Use predictive text” on page 78 for more information

$5[ 28 ]Use special charactersWhile entering text, press (or press and hold, if predictive text is on) to display special characters. Press again to cycle through all available characters.Use four-way scrollingNavigate special characters using the 2, 4, 6, and 8 keys much as you would a joystick. Once a character is highlighted press to insert the character into your message.SWITCH BETWEEN ABC AND 123 MODESPress and hold until the icon in the upper left corner of the display switches from Abc to 123 (or from 123 to Abc).SWITCH BETWEEN UPPERCASE AND LOWERCASE TEXTPress to alternate between upper case (ABC), lower case (abc), and sentence case (Abc) while in text mode.Available special characters.,‘?!“-()@/:_ ; +&%*=<>£$¥¤[]{}\~^¡¿§# lScroll upScroll rightScroll leftScroll downInsert character$

[ 29 ]The Phone book66 The Phone bookOne of the most useful features in the Nokia 6340i is its powerful Phone book. You can store up to 500 names and their associated web, e-mail, and street addresses within the Phone book. Each name, or entry as it is called, has room for multiple numbers and text entries.Note: This feature utilizes dynamic memory. See “Dynamic memory use” on page 8 for more information. • OPEN THE PHONE BOOK1At the Start screen, press Names. The submenus in the following table appear in the display. 2Use the scroll keys ( ) to highlight an option. Press Select ( ) to activate an option or enter its submenu.Phone book menuFind Search for a name in your Phone book or list the names and select from the listAdd entry Add a new entry (name and number) to your Phone bookEdit name Edit an existing name in your Phone bookAdd number Add a number to an existing entry in your Phone bookErase Erase names and numbers in your Phone book one by one or all at onceCopy Copy entries from SIM card to Phone or vice versa. You have the option to copy entries one by one or all at onceSettings Change how you view the Phone book, check your memory status, and select which memory to use

6[ 30 ]Add an entry to the Phone book1At the Start screen press Names, scroll to Add entry,and press Select.2Enter a name for the entry and press OK.3Enter the area code and number for the entry and press OK.The name and number are saved to the memory in use.OR1At the Start screen, enter the area code and number you wish to save and press Options.Tip: Always save numbers with a + in front to simplify international dialing. See “International dialing” on page 59 for more information.2Ensure Save is highlighted and press Select.3Enter a name for the number and press OK. The name and number are saved to the memory in use.1-touch dialing Show a list of 1-touch dialing numbers, if you’ve assigned any to keys 2-9Voice tags Show a list of voice dialing numbers, if you’ve assigned voice tags to any Phone book entriesService nos. List the fax, data, and voice numbers saved to your SIM card by your wireless providerOwnnumbers Display the phone number assigned to your phone, if the number is saved to the SIM card by your wireless providerCaller groups Setup a caller group. You can define ringing tones and graphics for up to five groups in your Phone book. See “Caller groups” on page 36 to setup a caller groupPhone book menu

[ 31 ]The Phone book6Number typesPhone numbers are sub-entries of an entry, or a name. Each entry can hold multiple numbers, and you can assign a different “type” to each. Once assigned, a number type is easily identified by the icon to the left of the number. The following number types are available:Important: If you plan on using Nokia PC Sync to synchronize your Phone book and your PC’s PIM (Personal Information Manager) application, make sure all phone numbers are assigned the correct number type. PC Sync uses this information to synchronize contacts correctly between phone and PC.ASSIGN OR CHANGE A NUMBER TYPENote: This function is not available for numbers stored only on your SIM card.1At the Start screen, press one of the scroll keys ( ) to display your Phone book entries.2Scroll to the entry containing the numbers you wish to change and press Details.3Use the scroll keys to highlight the number you wish to change and press Options.4Scroll to Change type and press Select.5Scroll to the number type of your preference and press Select.A confirmation message appears in the display.Add an address or note to a Phone book entryNote: This function is not available for numbers stored only on your SIM card.1With an entry in your Phone book highlighted, press Details. General Mobile Home Work Fax

6[ 32 ]2Press Options, scroll to Add info, and press Select.3Scroll to E-mail,Web address,Street addr., or Note and press Select.4Enter text with the keypad and press OK.•Press Clear to backspace and delete text• Press and hold Clear to backspace continuously and delete text• Press to switch between letter case (ABC,Abc, or abc)• Press and hold to switch between text and numbers• Press to display special characters (such as @, #, and more)Save a number (only)1At the Start screen, enter the area code and number you’d like to save.2Press and hold Options. The number is saved to your Phone book as a stand-alone entry.Display Phone book entries quicklyDisplay any entries in your Phone book with the press of a key. Just press one of the scroll keys ( ) at the Start screen.Tip: Any entries which display the SIM card icon ( ) in the upper right corner of the display) indicate that entry is saved to the SIM card.Note: Any entries which appear twice in the display (as in this illustration), indicate the entry is saved to both phone memory and SIM memory.Search the Phone book quickly1At the Start screen, press one of the scroll keys ( ) to display any entries in your Phone book.2Press the key which contains the first letter of the entry you’re

[ 33 ]The Phone book6searching (example; press twice to search for “Evelyn”).Any entries that begin with “E” appear in the display, as well as a search box with the magnifying glass icon ( ).3Continue entering letters to locate the entry, or move through and highlight other entries using the scroll keys.4Once you’ve highlighted the desired entry, press to dial the number. Or, press Details, then press Options to display the options listed in the following table.5Scroll to an option. Press Select to activate an option or to enter its submenu.Options while displaying a Phone book entryAdd voice tag Add a voice tag to the highlighted entryEdit number Edit the highlighted numberErase number Erase the highlighted numberView View the highlighted number*Change type Change the number to one of the 5 available types: General,Mobile,Home,Work, or Fax *Only works with numbers stored in phone memory*As primary no. Assign the number as your primary number. See “Assign a primary number” on page 35 for more information.*Only works with numbers stored in phone memoryAdd number Add another number to the selected entryAdd info Add an e-mail address, web address, street address, or note to the selected entryCaller groups Add the selected entry to one of the 5 available caller groups, or select No group.Send bus. card Send a business card containing the selected entry’s information to a compatible phone via IR or SMSSend message Send a message to the entry via SMS or e-mail

6[ 34 ]Edit names1At the Start screen, press Names and scroll to Edit name.2Press Select and scroll to the name you wish to change.3Press Edit, modify the name as desired, and press OK once you’ve finished.•Press Clear to backspace and delete text• Press and hold Clear to backspace continuously (and delete)Erase names and numbersYou can erase single entries in your Phone book or all entries at once.ERASE A SINGLE ENTRY1At the Start screen, press Names, scroll to Erase, and press Select.2Ensure One by one is highlighted and press Select.3Scroll to the entry you wish to erase and press Erase.4Press OK again to confirm the erasure, or Back to select another.ERASE ALL NAMES AND NUMBERS1At the Start screen, press Names, scroll to Erase and press Select.2Ensure Erase all is highlighted and press Select.3Scroll to Phone or SIM card and press Erase.4Press OK to confirm or Back to select from Phone or SIM card again.1-touch dialing Assign the number to a 1-touch dialing locationEdit name Edit the name of the entryView name View the name of the entryCopy Copy the entry to another memory locationErase Erase the entry and all information it containsOptions while displaying a Phone book entry

[ 35 ]The Phone book6If you pressed OK, you’re prompted to enter the security code (default is 12345).5Enter the security code and press OK to erase or Back to select from Phone or SIM card again.Important: If you enter the wrong security code 3 times in a row, the phone is blocked and won’t accept a code for 5 minutes.Assign a primary numberFor names containing more than one number, assign the most-dialed number as the primary number. The primary number is the number dialed when you select a name for dialing that contains multiple numbers.1At the Start screen, press or to display a list of Phone book entries.2Scroll to a name containing multiple numbers and press Details.3Scroll to the number you’d like to assign as the primary number (or change to the primary number) and press Options.4Scroll to As primary no. and press Select. The primary number is set. • CUSTOMIZE THE PHONE BOOKChange the Phone book viewYou can view the contents of your Phone book as a list or view each entry as a full display (larger text).1At the Start screen, press Names, scroll to Settings, and press Select.2Scroll until Phone book view appears in the display and press Select.3Scroll to Name list or Name+number and press Select.

[ 37 ]The Phone book6 • YOUR PHONE’S MEMORYYour phone has three options for the use of its memory; Phone,SIM, and Phone and SIM combined. Only names and numbers saved to the memory in use will appear in the display.Note: With Phone and SIM memory selected, entries saved to both memories appear in the display. Therefore, you may see the same entry twice when you view the contents of your Phone book.Memory specific informationNote: This feature utilizes dynamic memory. See “Dynamic memory use” on page 8 for more information.Feature Phone SIM Phone and SIM*Name capacity Up to 500 names Up to 250 names (varies with SIM card)Up to 750 names (both SIM and phone entries are displayed)*Number capacity Multiple numbers per nameOne per name Multiple numbers per name (stored in phone memory)Can use Voice dialing? Yes Yes YesCan transfer names/numbers to another phone?Via IR or PC Suite Via IR, PC Suite, and SIMVia IR, PC Suite, and SIM*Can store text in-formation such as street address, e-mail address, note?Multiple text entries per nameNo Multiple text entries per name (stored in phone memory)

6[ 38 ]View memory in useYou can view the memory available in your Phone or SIM card by doing the following:1At the Start screen, press Names and scroll to Settings.2Press Select and scroll until Memory status appears in the display.3Press Select, scroll to Phone or SIM card, and press Select again.Depending on which memory you’ve selected, either a graphic or numeric representation of memory usage appears in the display.Select a memory1At the Start screen, press Names, scroll to Settings, and press Select.2Scroll until Memory in use appears in the display and press Select.The following options are available:3Scroll to the memory option of your choice and press Select.Tip: If you wish to save multiple numbers to a name, or information such as an e-mail or street address, choose Phone or Phone and SIM. • COPY PHONE BOOK ENTRIES1At the Start screen, press Names, scroll to Copy, and press Select.2Scroll to From phone to SIM card or From SIM card to phone and Phone and SIM Data is saved to Phone memory, but SIM and Phone entries appear in the display. Phone Data is saved to Phone memory. Only entries saved to Phone memory appear in the display.SIM card Data is saved to the SIM card. Only entries saved to the SIM card appear in the display.

[ 39 ]The Phone book6press Select. The following options appear in the display:3Scroll to the copy method of your choice and press Select.a) If you selected One by one, go to step 4.b) If you selected All or Primary nos., go to step 6.4Scroll to the entry you wish to copy and press Copy.5Scroll to Keep original or Move original and press Select. The entry is copied and you’re returned to the list of Phone book entries.6If you selected All or Primary nos. in step 3, scroll to Keep original or Move original and press Select.7Press OK to confirm your choice. All entries are copied to the selected destination. Press Back to return to the list of Phone book entries, or press to exit and return to the Start screen.Caution: Select Keep original if you’re unsure of which copy method to use. This ensures original entries are merely copied to the new location. Move original deletes files after copying. • VIEW SERVICE NUMBERSYour wireless provider may have saved service numbers to your SIM card. To view these numbers:1At the Start screen, press Names, Scroll to Service nos. and press Select. A list of numbers, if available, appear in the display.2To view details of a number, scroll to the number and press Details.Note: This feature may not be supported by your SIM card. If so, contact your wireless provider if you wish to have it enabled.One by one Select and copy entries one by oneAll Copies all entries from the SIM card or Phone*Primary nos. Copies only primary numbers. This appears only if you select From phone to SIM.

7[ 40 ]7 Call logCall log stores information about the last 20 missed, received, or dialed calls. It also adds the total duration of all calls. When the number of calls exceed 20, the most recent call replaces the oldest. For Call log to work properly:• Your wireless provider must support caller ID, and it must be enabled• Your calls can’t be blocked• Your phone must be on and within the service area • CALL LOG OPTIONSWhether you are viewing missed, received, or dialed calls, each of the menu options will be the same. Please refer to the following table regarding menu options for these features.Missed, received, and dialed call optionsCall time Display the date and time of the callSend message Send a message to the numberView number Display the numberEdit number Edit the number and associate a name with the numberSave Enter a name for the number and save it to your Phone bookAdd to name Add the number to an existing entry in your Phone book, if the number is not associated with a nameErase Clear the number from memoryCall Call the number

[ 41 ]Call log7View missed callsMissed calls are calls that were never answered. You can check for missed calls two ways:1If # missed call appears in the display, press List. The phone number appears in the display.2Press Options to display the options listed in the table on page 40.3Scroll to an option, press Select to activate the option or to enter its submenu.OR1At the Start screen, press Menu 2-1 (Call log - Missed calls).After a brief pause, a list of missed calls appear in the display (if any exist).2Scroll to a number and press Options to display the options listed in the table on page 40.3Scroll to an option, press Select to activate the option or to enter its submenu.View received callsReceived calls are calls that have been answered.1At the Start screen, press Menu 2-2 (Call log - Received calls).After a brief pause, a list of received calls appears in the display (if any exist).2Scroll to a number and press Options to display the options listed in the table on page 40.3Scroll to an option, press Select to activate the option or enter its submenu.

7[ 42 ]View dialed numbersYou can view dialed numbers one of two ways:1At the Start screen, press . Your most recently dialed numbers appear in the display.OR2At the Start screen, press Menu 2-3 (Call log - Dialed numbers). After a brief pause, your most recently dialed numbers appear in the display.3Scroll to a number and press Options to display the options listed in the table on page 40.4Scroll to an option, press Select to activate the option or enter its submenu.Call timesYou can receive up to five calls from the same number, and view the time each call occurred. Your clock must be set for this feature to work accurately. See “Set the time and date” on page 103 for instructions on setting your clock.1While viewing a missed or received call, press Options, scroll to Call time, and press Select.2The time that the last call occurred appears in the display. 3Press to view other call times from this number. Press Back to return to the options list. Clear call listsTo clear any missed, dialed, or received calls from your phone’s memory:1At the Start screen, press Menu 2-4 (Call log - Clear call lists).After a brief pause, All,Missed,Received and Dialed appear in the display.2Scroll to the call type you’d like to clear and press Select.

[ 43 ]Call log7View call duration1Duration of last call. At the Start screen, press Menu 2-5-1 (Call log - Call timers - Duration of last call). The duration of your last call appears in the display.2Duration of dialed calls. At the Start screen, press Menu 2-5-2 (Call log - Call timers - Duration of dialed calls). The duration of all dialed calls appears in the display.3Duration of received calls. At the Start screen, press Menu 2-5-3 (Call log - Call timers - Duration of received calls). The duration of all received calls appears in the display.4Duration of all calls. At the Start screen, press Menu 2-5-4 (Call log - Call timers - Duration of all calls). The duration of all calls (missed, dialed, and received) appears in the display.Activate/deactivate summary after callTo show (or not show) the duration of each call after you hang up:1At the Start screen, press Menu 4-3-5 (Settings - Call settings - Summary after call). After a brief pause, On and Off appear in the display. 2Scroll to On or Off and press Select.Clear call timers1At the Start screen, press Menu 2-5-5 (Call log - Call timers - Clear timers). After a brief pause, you’re prompted to enter the security code. The default is 12345.2Enter the security code and press OK. A note confirming the timers have been cleared appears in the display.Important: Clear timers resets the duration timers for all call types and is irreversible.

[ 45 ]Use voicemail8•Press Listen if there’s a notification message in the display•Press Menu 01-9-1 (Messages - Voice messages - Listen to voice messages). After a brief pause, your phone dials the voicemail number.Once you connect and the pre-recorded greeting begins, follow the automated instructions to listen to your voice messages. • AUTOMATE VOICEMAILYou can insert special characters called “dialing codes” into phone numbers such as voicemail and then save the number to a 1-touch dialing location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string.Note: Each voicemail service can vary. The examples and steps that follow are for clarification. Check with your wireless provider if you have specific questions about your voicemail service.Write down some information1Write down your voice mailbox number.2Call and check your voicemail as you normally would.3Write down your interaction with the recorded prompts step-by-step. Keep in mind that each voicemail service may vary. However, it should look something like this:Dial 2145551212, pause 5 seconds, press , pause 2 seconds, enter 1234, press .Important: Be precise, you’ll need this information in “Setup voicemail with dialing codes” on page 46.LEARN HOW TO INSERT DIALING CODESPress repeatedly to cycle through dialing codes. Once the desired code appears, pause briefly to insert the code into your dialing string.

8[ 46 ]For example, press four times to display “w” (wait character). Pause briefly to insert the wait character into your dialing string. Available dialing codes are as follows:Setup voicemail with dialing codes1At the Start screen, press Names, scroll to 1-touch dialing, and press Select.2Scroll to an empty 1-touch dialing slot and press Assign.3Enter your voice mailbox number, including the area code.4Refer to the table entitled “dialing codes,” and enter any codes as necessary using the information that you wrote down earlier.For example, if you pause for 5 seconds after connecting to voicemail, enter p twice after the voice mailbox number, such as 2145551212pp.5Enter any remaining pauses, PIN codes, and other information that allows you to listen to your messages, then press OK.6Enter a name (such as Voicemail) and press OK. A message appears in the display confirming your 1-touch dialing location has been saved.Now, to dial and listen to your voicemail, just press and hold the assigned 1-touch dialing key at the Start screen. No other keypresses should be necessary.Dialing codes*Bypasses a set of instructions+Precedes an international telephone numberpPauses for 2.5 seconds before sending any numbers that followwWait. Your phone waits for you to press before it sends any numbers or codes that follow.

[ 47 ]Advanced features99 Advanced features • IN-CALL OPTIONSYou have numerous options while in a call. The options listed on the following pages are those available in the most common situations, such as when you are in a call or when a call is on hold.Note: Some options are network dependent. Check with your wireless provider if you have questions regarding availability.1Press Options while performing any of the following in-call activities.2Use your scroll keys to highlight an option.3Press Select to activate an option or enter the option’s submenu.With one call activeRecord Record the current phone conversationEqualizer Select an equalizer set or create a custom set of your ownEnd call Terminate the callNew call Place a new callTouch tones Enter touch tones manually or recall a string from your Phone bookPhone book Display the Phone book menuMenu Return to the main menusMute Mute the current call. You can hear the other person but they can’t hear youHold Place the current call on hold

9[ 48 ]With a call on hold *(See Note regarding in-call options)Record Record the current phone conversationEqualizer Select an equalizer set or create a custom set of your ownEnd call Terminate the callNew call Place a new callPhone book Display the Phone book menuMenu Return to the main menusMute Mute the current call. You can hear the other person but they can’t hear youUnhold Activates the held callWith one call active and another on hold *(See Note regarding in-call options)Record Record the active phone conversationEqualizer Select an equalizer set or create a custom set of your ownEnd call Terminate the active callEnd all calls End all callsConference Connect all parties in a conversationTouch tones Enter touch tones manually or recall a string from your Phone bookPhone book Display the Phone book menuMenu Return to the main menus

[ 49 ]Advanced features9 • CALL WAITINGIf supported by your wireless provider, call waiting notifies you of an incoming call while you’re in a call. You can then accept, reject, or ignore the incoming call.When you receive an incoming call1At first, the name or number appears in the display. After a few seconds, Call 2appears below Call 1 in the display. 2Press Answer or to pick up the call.The first caller is put on hold and Swappedappears in the display.3If you don’t pick up the call within 30 seconds, the call is dropped.Switch between calls•Press Swap or End the active call•Press End both calls•Press Options, scroll to End all calls, and press OKMute Mute the current call. You can hear the other person but they can’t hear youSwap Switch form the active call to the one on hold.Transfer calls Transfer your calls (on hold or otherwise) to another numberWith one call active and another on hold *(See Note regarding in-call options)

9[ 50 ]Reject a waiting call•Press Options, scroll to Decline call and press SelectPlace a new call with one on hold• While in a call, enter the number for the second call and press . The first caller is put on hold.• Switch between the two calls by pressing Swap or • End the active call by pressing • To end both calls, press Options, scroll to End all calls, and press Select • SEND OWN CALLER ID WITH NEXT CALLYou can prevent your number from being displayed on the receiving party’s caller ID. This feature is network dependent and works on a call-by-call basis. Contact your wireless provider for more information. • CALL FORWARDINGCall forwarding tells your network to redirect incoming calls to another number.Important: Call forwarding is network-dependent and may not work the same in all networks. Contact your wireless provider for availability.Activate call forwarding1At the Start screen, press Menu 4-3-1 (Settings - Call settings - Call forwarding).

[ 51 ]Advanced features92After a brief pause, the forwarding options listed in the following table appear in the display.3Scroll to the option of your choice and press Select.4Scroll to Activate and press Select.5Scroll to the destination to which your calls will be forwarded (such as To other no.) and press Select.6Enter the number to which your calls, data, or other information will be forwarded and press OK.Your phone calls the network to activate the feature you’ve requested. The network sends a confirmation note when the feature has been activated successfully.Forward all voice calls Forward all calls to the number you specifyForward if busy Forward incoming calls when you’re in a callForward if not answered Forward incoming calls to another number if you’re unable to answer. You can also set a delay before forwarding takes placeForward if out of reach Forward incoming calls when your phone is offForward when not able to take calls Forward calls that aren’t picked up. You can also set a delay before forwarding takes placeForward all fax calls Forward all fax calls to a fax mailboxForward all data calls Forward all data calls to a data mailboxCancel all call forwarding Cancel any call forwarding options you may have set

9[ 52 ]Cancel call forwarding• At the Start screen, press Menu 4-3-1-8 (Settings - Call settings - Call forwarding - Cancel all call forwarding).Note: Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your wireless provider for specific details.Automatic redialOccasionally, your network may experience heavy traffic, resulting in a “fast” busy signal when you dial. With automatic redial activated, your phone redials the number up to 10 times, and notifies you once the network becomes available.ACTIVATE OR DEACTIVATE AUTOMATIC REDIAL1At the Start screen, press Menu 4-3-4 (Settings - Call settings - Automatic redial).2After a brief pause, On and Off appear in the display. Scroll to your choice and press Select. •VOICE DIALYou can select up to 10 entries in your Phone book to dial by voice. Before you can do this, you’ll need to assign each entry a “voice tag.”Notes about voice tags• Voice tags can be no longer than 1.5 seconds• You cannot use voice dial while in a call•Press Quit to abort recording the voice tag• Choose a quiet location for recording voice tags• Unique tags are best. For example, “John Smith, work”• Avoid pauses or silence as you record the voice tag• If memory is full, Erase an existing voice tag? appears in the display. Press OK, scroll to locate a tag to erase, and then press EraseImportant: Do not use voice tags to dial in emergencies. Stress can cause changes in your voice and prevent the phone from recognizing your commands!

[ 53 ]Advanced features9Assign a voice tag1At the Start screen, press either scroll key ( ) to display the entries in your Phone book.2Scroll to the entry you’d like to assign a voice tag, and press Details.3If the entry has multiple numbers, scroll to the number you wish to tag and press Options.4Scroll to Add voice tag, press Select, and then press Start.5After the phone beeps, pronounce the voice tag clearly into the microphone. • If the recording is successful, the voice tag is replayed through the earpiece and a confirmation note appears in the display.• If the recording fails, the phone asks if you want to try again. Press OK to try again or Back to exit.Voice dial a number1At the Start screen, press and hold Names. The phone beeps and Please speak now appears in the display.2Within 3 seconds, pronounce the tag into the microphone.Once the voice tag is recognized, the tagged entry appears in the display, replays through the earpiece, and the number is dialed.VOICE DIAL WITH THE HEADSETAfter you’ve assigned voice tags to those entries you wish to dial, you can also voice dial a number using the optional HDC-9P headset.1At the Start screen, press and hold the remote button on the headset. Your phone beeps and Please speak now appears in the display.2Pronounce the voice tag into the microphone.Once the voice tag is recognized, the tagged entry appears in the display, replays through the earpiece, and the number is dialed.

[ 55 ]Advanced features92Scroll to the command you wish to tag and press Select.3Press Options.Add command is highlighted, press Select.4Press Start, and when the phone beeps, pronounce the voice tag into the microphone. The phone replays and saves the tag.Note: Don’t press Quit unless you want to cancel the recording.Execute a voice commandAfter you’ve associated a voice tag with a command, execute the command as follows:1Press and hold Names.Please speak now appears in the display.2Pronounce the tag for one of the 5 available commands. Found: <command> appears in the display and the command is executed.EXECUTE VOICE COMMANDS WITH THE HEADSETAfter you’ve associated a voice tag with a command, you can also execute voice commands using the optional HDC-9P headset.1At the Start screen, press and hold the remote button on the headset. The phone beeps and Please speak now appears in the display.2Pronounce the tag for one of the 5 available commands. Found: <command> appears in the display and the command is performed.Tip: You can also execute voice commands by pressing and holding the down volume key on the side of the phone.Change or erase an existing voice commands tag1At the Start screen, press Menu 5-2 (Voice - Voice commands).2After a brief pause, the list of voice commands appear in the display.3Scroll to the voice command you wish to modify and press Select.4When the command you wish to modify appears in the display, press Options.

9[ 56 ]5Scroll to Change or Erase and press Select.• If you selected Change, press Start, then record the new tag.• If you selected Erase, press OK and the tag for the selected command is erased. • VOICE RECORDERThe Nokia 6340i can record both voice memos and phone conversations. The total of all recordings stored in your phone can’t exceed 3 minutes. If you’re running out of memory and try to record, you’re asked to erase a recording before proceeding.Record a memo1At the Start screen, press Menu 5 -1-1 (Voice - Voice recorder - record).2After a brief pause, your phone begins recording and a progress bar appears in the display to indicate recorded time versus time left.3After you’re finished recording, press Stop, enter a title for the recording, and press OK.View recorded memos• At the Start screen, press Menu 5 -1-2 (Voice - Voice recorder - Recordings list).After a brief pause, your oldest recorded memo appears in the display.Playback a memo1At the Start screen, press Menu 5 -1-2 (Voice - Voice recorder -Recordings list).2After a brief pause, your oldest recorded memo appears in the display.3Scroll until the memo you wish to play appears in the display and press Options.4Scroll to Playback and press Select.

[ 57 ]Advanced features9The memo begins playing, and a progress bar appears in the display indicating the amount of play time left. If necessary, adjust the volume using the side volume key.PLAYBACK A MEMO WHILE IN A CALLYou can playback a memo while in a call. All participants in the call can then hear the memo as it’s played back.1While in a call, press Options, scroll to Menu, and press Select.2Scroll until Voice (menu) appears in the display and press Select.Voice recorder appears in the display.3Press Select, scroll to Recordings list and press Select again.4Scroll until the memo you wish to playback appears in the display and press Options.5Scroll to Playback and press Select to play the memo.Erase a memo1At the Start screen, press Menu 5 -1-2 (Voice - Voice recorder - Recordings list).2After a brief pause, your oldest recorded memo appears in the display.3Scroll until the memo you’d like to erase appears in the display and press Options.4Scroll to Erase and press Select. You’re asked to confirm the erasure.5Press OK and the memo is erased.Record a phone conversation1While in a call, press Options, scroll to Record, and press Select.2Your phone begins recording the conversation. A progress bar and timer appear in the display, indicating the amount of time left. Also, a beep sounds every 5 seconds to notify both parties the conversation is being recorded.3Press Stop to abort the recording. The recording is saved as the time and date.

9[ 58 ]Note: It may be illegal in some jurisdictions to record a phone conversation without the permission of all participants. • 1-TOUCH DIALINGYou can associate any entry in your Phone book with keys 2 through 9, and then dial those entries by pressing and holding the assigned key.Assign a key to 1-touch dialing1At the Start screen, press Names, scroll to 1-touch dialing and press Select.2Scroll to any empty slot and press Assign.3Enter the number (including the area code) and press OK, or press Find to retrieve a number from your Phone book.4Enter a name for the number and press OK.Make a call with 1-touch dialing• Press and hold the key to which an entry has been assigned, or press the key to which an entry is assigned and press . Your phone dials the entry assigned to the key.CHANGE 1-TOUCH DIALING NUMBERS1At the Start screen, press Names, scroll to 1-touch dialing and press Select.2Scroll to the 1-touch dialing location you wish to change and press Options.3Scroll to Change and press Select.4Enter the new number, or press Find to retrieve a number from your Phone book, and press OK.5Enter a name for the entry and press OK.

[ 59 ]Advanced features9ERASE 1-TOUCH DIALING NUMBERS1At the Start screen, press Names, scroll to 1-touch dialing and press Select.2Scroll to the 1-touch dialing location you wish to erase and press Options.3Scroll to Erase and press Select. You’re asked to confirm the erasure.4Press OK to erase the key assignment. •INTERNATIONAL DIALINGInternational numbers require a prefix specific to the country from which you’re calling. Ensure your phone always has the correct home prefix by doing both of the following.Save international numbers with a + in frontSave all international numbers with a + in front. For example, a number to Finland from the U.S. would look as follows: (+358 123456789).Set the international prefix1Press Menu 4-3-3 (Settings - Call settings - International prefix). After a brief pause, an entry box appears in the display.2Enter the prefix specific to the country from which you are calling and press OK. For example, in the United States, enter 011.

10[ 60 ]10 Customize your phoneThe Nokia 6340i can be easily customized to fit your life-style. The display language, ringing tones, audio, and accessory settings (among others) can all be modified to suit your needs. Now, it’s even possible to use a TTY or TDD device with your phone in all modes of operation (analog or digital). • SET THE DISPLAY LANGUAGE1At the Start screen, press Menu 4-4-1 (Settings - Phone settings - Language).After a brief pause, Automatic,English,Français,Español, and Português appear in the display.2Scroll to the language of your choice and press Select.Note: The Language setting affects the time and date formats of the Clock, Alarm clock, and Calendar. • USE A SCREEN SAVERChoose a digital or analog clock format as a screen saver for your display. When you activate screen saver, a picture appears on the display after your phone has been inactive for a time that you set. You can choose a timeout duration only 5 seconds or as long as 59 minutes. Then, the picture stays visible until you press any key.Choose a screen saver1Press Menu 4-3-3 (Settings - Phone settings - Screen saver).2Scroll to Clocks and press Select.3Scroll to the clock format you want and press Select. The screen saver menu appears again.4Scroll to On and press Select. A message appears in the display confirming your selection.

10[ 66 ]Make a call with TTYNote: You must have a an accessory attached to your phone prior to selecting the accessory settings menu.1At the Start screen, press Menu 4-6-4-1-1 (Settings - Accessory settings - TTY/TDD - Use TTY - Yes). After a brief pause, a confirmation message appears in the display.Note: After selecting Yes, this becomes the default and you won’t have to do it again unless you turn TTY/TDD off.2Press to return to the Start screen.3Enter the number you wish to call (on the phone) and press .4When the receiving party answers, begin typing your conversation on the TTY.End a TTY call• Press on the phoneReceive a TTY call1Make sure the TTY and phone are connected.2When the phone vibrates (if vibrate is on), press to answer the call, and then type your response on the TTY.3To hang up, press on the phone. • OPTIONAL HEADSETSThe HDC-9P and HDE-1 headsets can be purchased separately as accessories.Connect the headset1Plug the headset jack into the accessory connection on the bottom end of your phone.2Place the round headset ear plug in your ear.

[ 67 ]Customize your phone10With the headset connected, you can make, answer, and end calls as usual.• Use the keypad to enter numbers• Press to place a call• Press to end a callWhen in use, the headset microphone hangs at the side of your head. Although it may seem far from your mouth, you can speak at normal volume.VOICE DIAL A NUMBER WITH THE HDC-9P HEADSETOnce you’ve voice tagged entries in your Phone book, you can make a call with the HDC-9P headset by simply pressing and holding the remote button on the microphone. See “Assign a voice tag” on page 53 for information on setting up voice tags if you haven’t already.1At the Start screen, press and hold the remote button on the headset. Your phone beeps and Please speak now appears in the display.2Within 3 seconds, pronounce the voice tag into the microphone.Once the voice tag is recognized, the tagged entry appears in the display, replays through the earpiece, and the number is dialed. • AUDIO SETTINGSMuch like a stereo, your phone’s audio can be customized to your preference. You can choose from a list of 4 equalizer presets or create up to 2 custom sets of your own. Choose an equalizer set1At the Start screen, press Menu 4-3-2 (Settings - Call settings - Equalizer). After a brief pause, the following equalizer sets appear in the display.Normal Switches the Equalizer offBright Amplifies higher frequenciesDark Amplifies lower frequencies

10[ 68 ]2Scroll to the equalizer set of your choice and press Select. A graphic of the equalizer set you have chosen appears in the display. 3Press OK to activate the set or Back to return to the list of sets.Create a Custom equalizer set1At the Start screen, press Menu 4-3-2 (Settings - Call settings - Equalizer). After a brief pause, a list of equalizer sets appears in the display. 2Scroll to Set 1 (or Set 2) and press Select.3Scroll to Edit and press Select.Set 1appears in the display with the first bar highlighted.4Press Adjust, then use the scroll keys to adjust the setting. When you’re finished, press OK.5Press to select the next bar. Press Adjust, and use the scroll keys to adjust the setting. When you’re finished, press OK.6Press to select additional bars. Press Adjust and use the scroll keys to modify each bar’s setting. Press OK to accept any settings before continuing to the next bar.7Once you’re finished, press Back, where you can Activate the setting, return to Edit, or Rename the setting.CHOOSE AN EQUALIZER SET WHILE IN CALL1While in a call, press Options, scroll to Equalizer, and press Select.2Scroll to one of the 6 equalizer settings and press Activate.Loudness Amplifies both higher and lower frequenciesSet 1 Customizable equalizer settingSet 2 Customizable equalizer setting

[ 69 ]Customize your phone10 • DOWNLOAD A RINGING TONEIn addition to 30 ringing tones that come with your phone, you can download up to 10 more over the Internet, or have them sent to your phone via SMS. You can also create ringing tones of your own and send them to your phone or other compatible phones using Nokia PC Suite. For more information on PC Suite, see the PC Connectivity Guide.Note: This function can be used only if it is supported by your network operator or wireless provider. Only phones that offer download features can receive ringing tones. Contact your wireless provider for details.When you receive a ringing toneRinging tone received appears in the display.LISTEN TO THE TONE1Press Options, scroll to Playback, and press Select.2To stop playing the tone, press Quit or .DISCARD THE TONE •Press Options, scroll to Discard, and press Select.SAVE THE TONE 1Press Options, scroll to Save, and press Select.2Scroll to an available slot and press Replace.

11[ 70 ]11 Manage phone securityYou can lock your keypad, restrict selective calls, and use security codes to secure your phone against accidental or unauthorized use.Important: When Keyguard is on, calls may be possible to dial emergency numbers (for example, 911 or other official emergency numbers). Key in the emergency number and press . The number is displayed only after you have keyed in its last digit. • LOCK AND UNLOCK THE KEYPAD (KEYGUARD)Remember to lock your phone’s keypad to prevent accidental calls. If the keypad is locked, it unlocks when you receive a call. After the call the lock automatically reactivates.LOCK THE KEYPAD (KEYGUARD)• At the Start screen, press Menu . Keys locked appears in the display.UNLOCK THE KEYPAD• At the Start screen, press Unlock . Keys unlocked appears in the display. • SECURITY LEVELSThe security level determines your access to features when a “non-owner” SIM card is used. A “non-owner” SIM card is one (other than the original) that is inserted after you power off the phone. There are 3 security levels:Security levelsOff Owner and Non-owner cards are treated the sameMemoryNon-owner cards can access SIM memory. Any changes to the memory setting requires the security code.The owner card has access to all features, but the security code is required to change a memory settingPhone The security code is required upon power-up

[ 71 ]Manage phone security11Set your security level1At the Start screen, press Menu 4-7-3 (Settings - Security settings - Security level). 2After a brief pause, you’re prompted to enter the security code. The default code is 12345. Enter the security code and press OK.3Scroll to Off,Memory, or Phone and press Select. • FIXED DIALINGOnce you setup and activate a fixed dialing list, your phone can make calls only to those numbers that you’ve defined in the fixed dialing list. Fixed dialing is a network feature and must be supported by your wireless provider.Set up and activate a fixed dialing list1At the Start screen, press Menu 4 -7-2 (Settings - Security Settings - Fixed dialing).The options in the following table appear in the display:Note: If you activate fixed dialing and the number list is empty, all outgoing calls, except for emergency numbers such as 911, require entry of the PIN2 code.2Scroll to Number list and press Select.Fixed dialing not active and then Fixed dialing list empty appear in the display.3You’re prompted to enter the PIN2 code. Enter the PIN2 code and press OK.Fixed dialing optionsOn Activate fixed dialing (see note above)Off Deactivate fixed dialingNumber list View the numbers in your fixed dialing list

11[ 72 ]4Enter the fixed dialing number, or press Find to retrieve a number from your Phone book, and press OK.5Enter a name for the number and press OK. A confirmation note appears in the display and you’re returned to the fixed dialing number list.6Press Back, scroll to On and press Select to activate fixed dialing.View or edit the fixed dialing list1At the Start screen, press Menu 4 -7-2 (Settings - Security Settings - Fixed dialing).2Scroll to Number list and press Select.3You’re prompted to enter the PIN2 code. Enter the PIN2 code and press OK.4Any numbers which you’ve assigned to fixed dialing appear in the display.5Scroll to a number and press Options.6The options in the following table appear in the display.• Use the scroll keys to highlight an option•Press Select to activate or enter an option’s submenuFixed dialing number optionsView number View the number for an entryAdd Add a number to your fixed dialing listEdit Edit the highlighted entryErase Erase the highlighted entryErase all Erase all entries in your fixed dialing list

[ 73 ]Manage phone security11Notes about fixed dialing• If a SIM card with fixed dialing that is activated is inserted into a phone that doesn’t support fixed dialing, the SIM card is rejected• If you try to add a name (without a number) to the fixed dialing list, you’ll receive an error message• If you try to browse the fixed dialing list, but haven’t stored any numbers, Fixed dialing list empty appears in the display• You cannot access SIM memory manually (view or copy numbers on the SIM card) while fixed dialing is active • ACCESS CODESUse access codes to change your security code, PIN code, and PIN2 code.Note: Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.The security codeThe security code controls access to features such as the security level and is supplied with the phone. The preset code is 12345.Note: If you enter the wrong security code five times in succession, you won’t be able to enter a code for five minutes, even if you power off the phone between incorrect entries.CHANGE YOUR SECURITY CODEOnce you change the security code from its preset of 12345, keep the new code secret, and in a safe place separate from your phone.1Press Menu 4 -7-4-1 (Settings - Security settings - Access codes - Change security code).After a brief pause, you’re prompted to enter the current security code (default is 12345).2Enter the current security code and press OK. You’re prompted to enter the new security code.3Enter the new security code (up to 10 characters) and press OK.You’re asked to re-enter the new security code for verification.

11[ 74 ]4Enter the new security code again and press OK. A message appears in the display confirming your security code has been changed.The PIN codeThe PIN code protects the SIM card from unauthorized access. The PIN code can be 4- 8 digits in length. After three successive incorrect entries the PIN code is blocked and you’ll be asked to enter the personal unblocking key (PUK) code.Note: The PIN code must be obtained from your wireless provider. The PIN code is typically provided with your SIM card.PIN CODE REQUESTEnable your phone to request the PIN code upon power-up. This provides extra security in case your phone is lost or stolen.1Press Menu 4-7-1 (Settings - Security settings - PIN code request).2After a brief pause, you’re prompted to enter the current PIN code. Enter the PIN code and press OK.3Scroll to On and press OK. A message appears in the display confirming your selection.CHANGE YOUR PIN CODEBefore you can change your PIN code, you’ll need to enable PIN code request. See “PIN code request” immediately preceding this section.1Press Menu 4-7-4-2 (Settings - Security settings - Access codes - Change PIN code).2After a brief pause, you’re prompted to enter the current PIN code. Enter the PIN code and press OK.3You’re prompted to enter the new PIN code. Enter the new PIN code and press OK.4You’re prompted to re-enter the new PIN code for verification. Enter the new PIN code again and press OK.A message appears in the display confirming your PIN code has

[ 75 ]Manage phone security11been changed.The PIN2 CodeThe PIN2 code is required for features such as Fixed dialing. If you enter an incorrect PIN2 code three times in succession, the PIN2 code is blocked and you’ll have to enter the PUK2 code.Note: The original PIN2 code must be obtained from your wireless provider.CHANGE YOUR PIN2 CODE1Press Menu 4-7-4-3 (Settings - Security settings - Access codes - Change PIN2 code). You’re prompted to enter the current PIN2 code.2Enter the current PIN2 code and press OK. You’re prompted to enter the new PIN2 code.3Enter the new PIN2 code and press OK. You’re asked to verify the new PIN2 code by entering it again.4Enter the new PIN2 code again and press OK. A message appears in the display confirming you’ve changed the PIN2 code.Personal unblocking key (PUK) codesPUK and PUK2 codes are used to restore blocked PIN and PIN2 codes. Both PUK and PUK2 codes are eight characters in length and cannot be changed. PUK and PUK2 codes must be obtained from your wireless provider.Important: If you enter an incorrect PUK or PUK2 code 10 times in succession, the message SIM rejected appears in the display and the SIM card can no longer be used. You must contact your wireless provider for a new SIM card.

12[ 76 ]12 MessagesIf you’re subscribed to a message service, you can send and receive messages to compatible phones that also have a message service. You can also send and receive picture messages and e-mail if supported by your network. Composed messages can be up to 160 characters in length.Note: This feature utilizes dynamic memory. See “Dynamic memory use” on page 8 for more information.Message iconsIcons that precede the title of a message indicate the following:Before you can send and receive messagesYou’ll need the following to send and receive messages:• A messaging service through your wireless provider• A message center number, which must be saved to your phone (if your wireless provider hasn’t done so already)The message has not been readThe message has been readA message (which you’ve composed) has not been sentiThe message is a delivery report

12[ 78 ]Note: The Language setting affects the time and date formats of the Clock, Alarm clock, and Calendar.Use predictive textFor example, to write Nokia, with the English dictionary selected, press each of the following keys once: (with predictive text on): (for N) (for O) (for K) (for I) (for A) The illustration above simulates your display each time a key is pressed.• Press to enter a space and begin writing the next word.• If a displayed word is not correct, press to see other matches. To return to the previous word in the list of matches, press Previous.•If ? appears after a word, press Spell to add the word to the dictionary.• Press to insert a period into your message.• Press and hold to display special characters. Press again to cycle through all available characters. See “Use special characters” in the following section for more information on special characters.Note: Press to switch predictive text on or off and to use predictive text in various modes. As you press , the following icons (not the descriptions) appear in the upper left of the display:Add new words to the dictionaryIf you encounter a word that predictive text doesn’t recognize, a question mark (?) follows the word and Spell appears in the lower left of the display. Uppercase textPredictive text is Off Sentence case textPredictive text is On Lowercase textPredictive text is Off Lowercase textPredictive text is On

$[ 79 ]Messages12•Press Spell, enter your new word using the keypad, and press Save.The word is added to the dictionary as well as the message you’re writing.NOTES ABOUT ADDING WORDS• New words that you accept by pressing Select, , or deleting the space between two words are saved to the dictionary.• Depending on the language and the length of the words, you may be able to add hundreds of words to the dictionary.• When the dictionary is full, the most recent addition replaces the first.Use special charactersWhile entering text, press and hold to display the following special characters. Press again to cycle through all available characters:Use four-way scrollingNavigate special characters using the 2, 4, 6, and 8 keys much as you would a joystick. Once a character is highlighted press to insert the character into your message..,‘?!“-()@/:_ ; +&%*=<>£$¥¤[]{}\~^¡¿§# lScroll upScroll rightScroll leftScroll downInsert character$