Microsoft RH-26 GSM 850/1800/1900 Cellular Telephone Bluetooth User Manual 6820 ENv1 9310322

Microsoft Mobile Oy GSM 850/1800/1900 Cellular Telephone Bluetooth 6820 ENv1 9310322

UserManual.wiki >

Microsoft >

RH-26 User Manual >

Users manual HTML Version

1. Users manual
2. Manual

Users manual

Nokia 6820 User Guide

What information is needed? Numbers Where is the number?

My number Wireless service provider

Voice mail number Wireless service provider

Wireless provider’s number Wireless service provider

Provider’s customer care Wireless service provider

Model number 6820 Title page and phone label

(under battery)

Phone type Phone label

IMEI number Phone label

LEGAL INFORMATION

PART NO. 9311367, ISSUE NO. 1

Nokia, Nokia Connecting People, Nokia 6820, Pop-Port, Nokia Tune, and the Nokia Original

Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other

company and product names mentioned herein may be trademarks or trade names of their

respective owners.

Printed in Canada 1/2004.

Nokia tune is a sound mark of Nokia Corporation.

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

US Patent No 5818437, 5953541, 6011554, and other pending patents. T9 text input software

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 6820 product. Nokia

operates a policy of ongoing development. Nokia reserves the right to make changes to any of

the products described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR

INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES

HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS

REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND

RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS

DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS

This device contains commodities, technology, or software exported from the United States in

accordance with the Export Administration regulations. Diversion contrary to U.S. or Canadian

law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close

proximity to receiving equipment). The FCC or Industry Canada can require you to stop using

your telephone if such interference cannot be eliminated. If you require assistance, contact

your local service facility. This device complies with part 15 of the FCC rules. Operation is

subject to the condition that this device does not cause harmful interference.

For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Quick Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

1 Welcome to Nokia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

About your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Overview of phone functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Shared Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

E-Newsletters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Accessibility solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

2 Phone setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Install SIM card and battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Charge the battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Switch the phone on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

How to hold your phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

How to get help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

3 Phone basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Open the keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Key functions (keyboard closed). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Key functions (keyboard open). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

About the five-way joystick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

The standby mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Customize the Go to menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Switch the keyboard lights on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Keypad lock (keyguard). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Over-the-air settings service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

4 Call functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Make a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Answer or reject an incoming call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Options during a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

5 Text entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Write text with the keyboard open . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Write text with the keyboard closed . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6 The menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Scroll to a menu function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Menu shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

7 Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Text messages (SMS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Archive folder and custom folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Text and picture templates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Manage distribution lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Text message counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Multimedia messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Delete messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

E-mail messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Info messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Message settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

E-mail settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Font size setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Service commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

8 Call log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Recent call lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Timers and counters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

9 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Contacts settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Add contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Search for a contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Delete contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Edit or delete details in contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

My presence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Copy contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

iii

Send and receive business cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Voice dialing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Save numbers on the SIM card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Caller groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

10 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

IM and my presence settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Tone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Time and date settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Personal shortcuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Connectivity and related settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

EGPRS modem settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Call settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Phone settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Enhancement settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Restore factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

11 Gallery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

12 Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Camera settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Take a photo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Record a video clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

13 Organizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Alarm clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Calendar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

To-do list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Wallet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Synchronization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

14 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Games. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

15 Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Phone setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Browse the pages of a service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Use the phone keys while browsing. . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Options while browsing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Downloads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Service inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Cache memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Browser security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

16 SIM services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

17 PC connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

PC Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Data communications applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

18 Enhancements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Enhancements for your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

19 Reference Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Battery information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Enhancements, Batteries, and Chargers. . . . . . . . . . . . . . . . . . . . . . . . . 96

Care and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Additional safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Nokia one-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Appendix A Message from the CTIA. . . . . . . . . . . . . . . . . 109

Appendix B Message from the FDA . . . . . . . . . . . . . . . . . 113

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the

complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it may

cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while

driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Don't use the phone at a refueling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don't use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Don't

touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important

information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety

instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Select End as many times as

needed to clear the display and return to the main screen. Enter the emergency

number; then select the Talk key. Give your location. Do not end the call until

given permission to do so.

Nokia 6820 phone at a glance

Display screen

Talk key End k

Charger port

Keyp

Earpiece

Pop-Port™

connector

Micropho

Five-way

joystick

Loudspeaker

Power key

Right selection k

Left

selection key

Infrared (IR) po

Camera le

Display screen

Talk key End k

Charger port

Keyp

Earpiece

Micropho

Loudspeaker

Power key

Right selection k

Left

selection key

Infrared (IR) po

Camera le

Quick Guide

Make a call Enter a phone number, and press the Talk key.

Answer a call Press the Talk key, or select Answer.

Answer call during call Press the Talk key.

End a call Press the End key.

Decline a call Press the End key (sends the call to voice mail, if

available).

Mute a call Select Mute during a call.

Redial Press the Talk key twice.

Adjust call volume Press the joystick to the left or the right.

Use the in-call menu Select Options during a call.

Save a name and number Enter a number, select Save, enter a name, and select

OK.

Use 1-touch dialing Press and hold a key (2–8). You must first assign a key

to a number in the phone book.

Look up a name Select Names > Find.

Check voice mail Press and hold the 1 key. (Contact your service provider

for details.)

Write and Send a text

message Select Menu > Messages > Text Messages > Create

Message. Write the message, select Send, enter the

phone number, and select OK.

Send a picture, video, or

audio file Select Menu > Gallery. Select a folder and locate the

item you wish to send. Select Options > Send. Enter

the phone number and select OK.

Read a new message If New Message appears, select Read, highlight the

message, and select Read again.

Reply to a message After viewing a message, select Reply. Write your reply

and select Send.

Press Press a key briefly and release it.

Press and hold Press a key, hold it for two to three seconds, and release

it.

Welcome to Nokia

1Welcome to Nokia

Congratulations on your purchase of the Nokia 6820 mobile phone.

•ABOUT YOUR PHONE

The Nokia 6820 phone comes in two model types—the Nokia 6820a phone, which is

approved for use in 900, 1800, and 1900 MHz GSM networks, and the Nokia 6820b phone

which is approved for use in 850, 1800, and 1900 MHz GSM networks.

To view your model type, refer to the information label under the battery. For more

information about where this label is located, see “Find the information label” on page 12.

When using the features in this device, obey all laws and respect privacy and legitimate

rights of others.

Warning:To use any features in this device, other than the alarm clock, the phone

must be switched on. Do not switch the device on when wireless phone use may

cause interference or danger.

•OVERVIEW OF PHONE FUNCTIONS

Your Nokia 6820 phone provides many useful features:

Messaging keyboard—provides a complete keyboard designed for easy text writing. You can

use all of the phone functions with the keyboard either closed or open. When you open the

keyboard you have the extra benefit of a full messaging keyboard.

Speakerphone—allows you to have hands-free conversations. You can activate the loudspeaker

at any time during a call. To activate the speakerphone, select Loudsp. To deactivate the

speakerphone during a call, select Handset.

EDGE (enhanced data rates for GSM evolution)—allows you to use EDGE packet

transmission networks for connections that are faster than GPRS.

XHTML browser—allows you to retrieve and view colorful and rich graphical content from

Web servers.

Instant messaging—lets you send short text messages that are delivered to online users.

Presence-enhanced messaging—lets your colleagues, family, and friends know when you

are available.

E-mail—lets you write, send, and retrieve e-mail from your compatible e-mail account.

MMS (multimedia messaging service)—lets you send and receive multimedia messages

containing text, pictures, sound or video clips to and from compatible devices. You can save

the pictures and ringing tones on your phone.

GPRS (general packet radio service)—allows your phone to send and receive data over a

mobile network. Applications such as WAP, MMS and SMS messaging, and Java™ may use

GPRS.

Polyphonic sound—consists of several sound components that are played at the same time.

The phone has sound components from over 40 instruments and can play up to 16

instruments at the same time. The phone supports scalable polyphonic MIDI (SP-MIDI)

format.

J2METM (Java 2 Micro Edition) support—lets you play the included Java applications and

games and supports many applications and games that you can download.

OTA (over-the-air) settings service—allows you to receive WAP, MMS, GPRS and other

wireless service settings directly as an OTA message. You only need to save the settings on

your phone. For more information on the availability of the settings, contact your service

provider or the nearest authorized Nokia dealer.

•NETWORK SERVICES

To use the phone you must have service from a wireless service provider. Many of the

features in this device depend on features in the wireless network to function. These

Network Services may not be available on all networks or you may have to make specific

arrangements with your service provider before you can utilize Network Services. Your

service provider may need to give you additional instructions for their use and explain what

charges will apply. Some networks may have limitations that affect how you can use

Network Services. For instance, some networks may not support all language-dependent

characters and services.

Your service provider may have requested that certain features be disabled or not activated

in your device. If so, they will not appear on your device menu. Contact your service provider

for more information.

•SHARED MEMORY

The following features in this device may share memory: contacts, text, IM and multimedia

messages, e-mail, voice tags and SMS distribution lists, images, ringing tones, video and

sound clips in the gallery, camera, calendar, to-do notes, Java games, applications, and the

notes feature. Use of one or more of these features may reduce the memory available for

the remaining features sharing memory. For example, saving many images may use all of

the available memory. Your phone may display a message that the memory is full when you

try to use a shared memory feature. In this case, delete some of the information or entries

stored in the shared memory features before continuing. Some of the features, such as

calendar notes, may have a certain amount of memory specially allotted to them in addition

to the amount of memory shared with other features.

Welcome to Nokia

•REGISTER YOUR PHONE

Make sure to register your phone at www.warranty.nokiausa.com or 1-888-NOKIA-2U

(1-888-665-4228) so that we can serve your needs better if you should need to call the

center or have your phone repaired.

•E-NEWSLETTERS

When you register your phone, you can sign up for Nokia's e-newsletter Nokia Connections

if you would like. You will receive tips and tricks on using your phone, accessory information,

and special offers.

•ACCESSIBILITY SOLUTIONS

Nokia is committed to making mobile phones easy to use for all individuals. Nokia maintains

an Internet site that is dedicated to accessibility solutions. For more information about phone

features, enhancements, alternate format user guides, and other Nokia products designed

with your needs in mind, visit the Web site at www.nokiaaccessibility.com or call

1-888-665-4228.

2 Phone setup

•CONNECTORS

1Connector for battery charger

2Connector for headsets, data cable and

other accessories.

3Connector for microphone

•INSTALL SIM CARD AND BATTERY

Keep all SIM cards out of the reach of small children. For availability and information on

using SIM card services, contact your SIM card vendor. This may be the service provider or

another vendor.

The SIM card and its contacts can be easily damaged by scratches or bending, so be careful

when handling, inserting, or removing the card.

Before installing the SIM card, always make sure that the phone is switched off and

disconnected from the charger or any enhancement; then remove the battery.

• With the back of the phone facing

you, push the back cover release

button (1) and, at the same time,

lift the back cover off the phone

(2).

• Slide the battery into the back

cover (3) until you hear it click

into place.

Phone setup

Important: Insert the battery exactly as shown in the diagram. The contacts on

the battery must be aligned with the contacts on the phone for the phone to

operate.

•To release the SIM card

holder, slide the card holder

backwards (4), and open it by

lifting it up (5).

• Insert the SIM card into the

SIM card holder (6).

Make sure that the SIM card

is properly inserted and that

the golden contact area on

the card is facing downwards.

• Close the SIM card holder (7) and slide it back into place (8).

• Direct the back cover towards the locking catches on the front cover (9), and slide the

back cover until it locks into place (10).

•CHARGE THE BATTERY

1Connect the charger to a wall socket.

2Connect the lead from the charger to the

socket on the bottom of your phone.

Charging appears briefly if the phone is

switched on. If the battery is completely

discharged, it may take a few moments

before the charging indicator appears on

the display or before any calls can be

made.

You can use the phone while the charger is

connected.

Charging time depends on the charger and the battery used. For example, charging a BL-5C

battery with the ACP-12 travel charger takes about 1and a half hours while the phone is in

the standby mode.

Phone setup

•SWITCH THE PHONE ON AND OFF

To switch on the phone, select and hold the Power key.

• If the phone prompts you for a PIN code or a security code,

key in the code and select OK. (For more information, see

“Access codes” on page 64.)

• If the phone displays Insert SIM card, even though the SIM

card is properly inserted, or SIM card not supported, contact

your provider. Your phone does not support 5-V SIM cards.

•HOW TO HOLD YOUR PHONE

Hold the phone as shown with the antenna area pointing up.

TIPS ON EFFICIENT OPERATION: Your phone

has a built-in antenna. As with any other radio

transmitting device, do not touch the antenna

unnecessarily when the phone is switched on.

Contact with the antenna affects call quality and

may cause the phone to operate at a higher

power level than otherwise needed. Not touching

the antenna area during a phone call optimizes

the antenna performance and the talk time of

your phone.

•HOW TO GET HELP

If you need help, Nokia Customer Care is available for assistance.

Find the information label

We recommend that you obtain the label

information so it can be available if you call.

This information is on the back of the phone,

beneath the battery.

• The international mobile equipment

identity (IMEI) number

• The phone model number

Contact Nokia

Please have your phone or enhancement with you when you place the call.

Nokia Customer Care Center, USA Customer Care Center, Canada

Nokia Inc.

7725 Woodland Center Boulevard

Suite 150

Tampa, Florida 33614

Tel:1-888-NOKIA-2U

(1-888-665-4228)

Fax: 1-813-249-9619

TTY: 1-800-24-NOKIA (hearing

impaired only) (1-800-246-6542)

Nokia Products Ltd.

601 Westney Road South

Ajax, Ontario L1S 4N7

Tel: 1-888-22-NOKIA

(1-888-226-6542)

Fax: 1-905-427-1070

Information label

Phone basics

3 Phone basics

Your phone can be used with the keyboard open or closed.

•OPEN THE KEYBOARD

1Hold the phone with both hands, and open the keyboard as shown.

2Extend the keyboard until you hear it click into place.

3Turn the phone to a horizontal position and hold is as shown.

Phone basics

•KEY FUNCTIONS (KEYBOARD CLOSED)

1Power key ( )—switches the phone on

and off. When the keypad is locked, it

turns the phone display lights on for

about 15 seconds.

2Left selection key—Keyboard open

()—becomes Left selection key when

the keyboard is open. This key has no

function when the keyboard is closed.

3Left selection key ( ) and right

selection key ( )—provides a variety of

functions that are indicated in guiding

text on the display above the keys.

4Five-way joystick ( )—moves in four

directions and selects the active menu

option when pressed. For details, see

“About the five-way joystick” on

page 17.

5Talk key ( )—dials a phone number

and answers a call. In the standby mode

it accesses the list of most recently

called numbers.

6End key ( )—ends an active call or

exits from the current function.

7Typing keys—enters numbers and

characters.

Note: Some phones may not

display the mobile Internet symbol on the (0) key.

•KEY FUNCTIONS (KEYBOARD OPEN)

When the keyboard is opened, the display graphics rotate 90 degrees and the Left, Middle,

and Right selection keys change positions. The guiding text near the Left and Right

selection keys does not change.

1Keyboard light key ( )—switches the keyboard light on or off.

2Power key ( )—switches the phone on and off.

3Five-way joystick ( )—moves in four directions and

selects the displayed menu option. (See illustration.)

4Backspace key ( )—deletes characters.

5Character key ( )—opens a set of characters and

symbols during text writing.

6Shift keys ( and )—enters upper case

letters and symbols. You can either press the Shift key

first and then the desired key or press both keys at the same time.

7Space bar keys ( and )—enters a space.

8Talk key ( )—dials a phone number and answers a call. In the standby mode it

accesses the list of most recently called numbers.

9Left selection key ( ) and Right selection key ( )—selects the menu option shown

in the guiding text displayed above the key.

10 End key ( )—ends an active call or exits from a function.

11 Enter key ( )—starts a new line when writing text.

Phone basics

•ABOUT THE FIVE-WAY JOYSTICK

The five-way joystick provides a variety of functions:

• Allows you to scroll through lists.

• Moves the cursor up and down, right and left when writing text, using the calendar,

and in some game applications.

• Selects the active menu item when pressed briefly (or confirms a selection).

• Adjusts the volume when moved to the left (to decrease volume) or to the right (to

increase volume) during a call.

• Activates the camera when moved up in the standby mode.

• Opens the text editing screen to write a text message when moved to the left in the

standby mode.

• Opens the calendar when moved to the right in the standby mode.

• Opens the contacts list when moved down in the standby mode.

•THE STANDBY MODE

When the phone is ready for use (the keyboard can be either closed or open), and you have

not keyed in any characters, the phone is in the standby mode. The following list describes

the sections of the screen while in the standby mode. (For detailed descriptions of the

screen icons, see “Icons in the standby mode” on page 19.)

1Network—shows the name of the network or the

operator logo, to indicate in which cellular network

the phone is currently being used.

2Signal strength—shows the signal strength of the

cellular network at the current location. The higher the

bar, the stronger the signal.

3Battery charge—shows the battery charge level. The

higher the bar, the more power in the battery.

4Left selection key menu option—shows the menu

option, which is Go to in standby mode.

5Menu—shows the joystick menu option.

6Right selection key menu option—shows the Right selection key menu option that

can be customized to display your preferred shortcut. The default setting is Contact,

which accesses the Contacts menu. To choose your own menu option for this key, see

“Personal shortcuts” on page 57.

•CUSTOMIZE THE GO TO MENU

Use these steps to customize the Go to menu.

1Select Go to to view the list of shortcuts in your personal shortcut list.

2To add items to the Go to menu, or remove items from the menu, choose Options >

Select Options.

Scroll to the desired function and select Mark to add it to the shortcut list. To remove

a function from the list, select Unmark.

3To rearrange items in the Go to menu, choose Options > Organize.

Select the desired function and select Move; then select the location where you want

to move the function.

•SWITCH THE KEYBOARD LIGHTS ON OR OFF

When you open the keyboard, the main display is lit, but the keyboard lights do not

automatically illuminate. To turn on the keyboard lights, press the Keyboard light key ,

located on the top left corner of the keyboard. The keyboard lights are switched off after a

certain time, but they are turned on again as soon as you press any key. To switch the

keyboard lights off, press the Keyboard light key or close the keyboard.

Screensaver

With the keyboard closed, the phone automatically activates a screensaver while in the

standby mode. This occurs after a certain length of time when none of the phone functions

have been used. For more information on the display, see “Display settings” on page 55.

Wallpaper

You can set your phone to display a background picture as wallpaper when the phone is in

the standby mode. For information on customizing your wallpaper, see “Display settings” on

page 55.

Phone basics

Icons in the standby mode

Icon Indicates...

You have one or more new text or picture messages.

You have one or more new multimedia messages.

Your phone is connected to the IM service and the availability status is online or offline,

respectively.

You have one or more IM messages and you are connected to the IM service.

The phone keypad is locked.

The phone will not ring for an incoming call or a text message because Incoming call

alert and Message alert tone are set to Off.

The alarm clock is set to On.

The countdown timer is running.

The stopwatch is running in the background.

The EGPRS connection mode is set to Always online and EGPRS service is available.

An EGPRS connection is active.

The EGPRS connection is suspended (on hold).

There is an active IR connection.

Your calls are forwarded to another number. If you have two phone lines, the icon for the

first line is and for the second line is .

The selected phone line (only appears if you have two phone lines).

The loudspeaker is activated.

•KEYPAD LOCK (KEYGUARD)

The keyguard feature locks the keypad to prevent the keys from being accidentally pressed.

You can lock the keypad only when the keyboard is closed.

Security keyguard is an additional feature that allows you to set up a code to unlock your

phone before use. For information on security keyguard, see “Phone settings” on page 62.

Note: When keyguard is on, calls may be possible to the emergency number

programmed into your phone. Key in the emergency number and press the Talk key

. The number is displayed only after you have keyed in its last digit.

LOCK THE KEYPAD

• In the standby mode, select Menu; then press the * key within 1.5 seconds.

• To lock the keypad during a call, select Options > Lock Keypad.

• To answer a call when keyguard is on, press the Talk key. During the call, the phone can

be operated normally. When you end or reject the call, the keypad automatically locks.

UNLOCK THE KEYPAD

Select Unlock; then press the * key within 1.5 seconds, or open the keyboard. The keyguard

does not automatically reactivate when you close the keyboard.

Calls are limited to a closed user group. See “Security settings” on page 64.

The timed profile is selected.

A headset enhancement is connected to the phone.

A hands-free enhancement is connected to the phone.

A loopset enhancement is connected to the phone.

A music stand enhancement is connected to the phone.

Icon Indicates...

Phone basics

•OVER-THE-AIR SETTINGS SERVICE

To use wireless services such as MMS and EGPRS, you need to have proper connection

settings on your phone. These settings may have already been set up by your service

provider. If not, you may obtain the settings directly as an OTA message, and save them on

your phone. For more information, contact your service provider.

You may be able to receive the connection settings for EGPRS, multimedia messages,

synchronization, IM and presence, e-mail, and multimode browser.

When you have received the connection settings as an OTA message, Connection settings

received is displayed.

• To save the settings, select Options > Save. If the phone prompts you to enter the PIN

code for the settings, key in the PIN code and select OK. To obtain the PIN code, contact

the service provider that supplies the settings. If no settings have been saved yet, the

settings are saved under the first free connection set.

• To view the received settings first, select Options > View. To save the settings, select

Save.

• To discard the received settings, select Options > Discard.

To activate the settings, see “Connect to a service” on page 85.

4 Call functions

•MAKE A CALL

You can make a call with the keyboard open or closed. If you open the keyboard, the

loudspeaker automatically activates.

Enter the phone number

1Key in the phone number, including the area code.

If you key in an incorrect character, select Clear to delete it. To make a call when the

keyboard is open, key in the phone number using the number keys.

For international calls, press the * key twice for the international prefix or, if the

keyboard is open, press +. (The + character replaces the international access code.)

Then key in the country code, the area code (without the leading 0), if necessary, and

the phone number.

2Press the Talk key to call the number.

3Press the End key to end the call or to cancel the call attempt.

Note: To adjust the volume during a call, move the joystick to the right to

increase the volume or to the left to decrease the volume.

For more information, see “Options during a call” on page 24.

Use the contact list

1Select Names > Find and select a name from the list.

2Choose a phone number for the contact and press the Talk key.

3Press the End key to end the call or to cancel the call attempt.

To search for a name/phone number that you have saved in Contacts, see “Search for a

contact” on page 46.

Last number redial

In the standby mode, press the Talk key once to access the list of the last 20 numbers you

called or attempted to call. Scroll to the number or name that you want, and press the

Send key to call the number.

Call your voice mailbox

In the standby mode when the keyboard is closed, press and hold the 1 key, or press the

1 key, then the Talk key. When the keyboard is open, press and hold the corresponding

number key on the keyboard.

Call functions

If you are prompted to supply a voice mailbox number, key it in and select OK. Contact your

service provider to obtain your voice mailbox number. For more information, see “Voice

messages” on page 38.

Speed dial a phone number

Before you can use 1-touch dialing you need to assign speed dial numbers. For more

information, see “Speed dialing” on page 50.

If 1-touch dialing is set to off, press the speed dialing number and then press the Talk key.

If 1-touch dialing is set to on, press and hold a speed dialing key until the call is started.

Note: To activate 1-touch dialing, select Menu > Settings > More Settings > Call

settings > 1-touch dialing > On.

•ANSWER OR REJECT AN INCOMING CALL

Press the Send key to answer an incoming call, and press the End key to end the call.

Press the End key to reject an incoming call.

If you select Silence, only the ringing tone is muted. Then, either answer or reject the call.

If you are using a headset with a headset key, you can also answer and end a call by pressing

the headset key.

If the Call forwarding function has been activated to forward calls, rejecting an incoming

call will also forward the call. See “Call settings” on page 61.

Caller ID

When there is an incoming call, the phone shows the caller’s name, phone number, or the

text Private number or Call.

If more than one name is found in Contacts with the same seven last digits of the phone

number as the caller’s number, only the phone number will be displayed (if it is available).

If the caller’s number has not been saved in Contacts, but there is another name saved with

the same seven last digits in the phone number as in the phone number of the caller, the

phone may display an incorrect name.

Call waiting

During a call, press the Send key to answer the waiting call. The first call is put on hold.

Press the End key to end the active call.

To activate call waiting, see “Call settings” on page 61.

•OPTIONS DURING A CALL

Many of the options during a call are dependent on network services. For availability,

contact your service provider.

When you select Options during a call, you can select one of the following basic options:

Lock keypad, Record, End call, New call, End all calls, Contacts, Menu, Mute or Unmute,

Hold or Unhold, Private, Answer and Reject.

The following options are also available:

Conference—allows you to make a conference call that allows up to five people to take part

in a conference call. During a call, make a call to a new participant (New call). The first call

is put on hold. When you have answered the new call, select Conference to include the first

participant in the call. To have a private conversation with one of the participants, select

Private and select the participant. To rejoin the conference call after a private conversation,

select Conference.

Send DTMF—sends DTMF (dual tone multifrequency) tone strings, such as passwords or

bank account numbers. The DTMF system is used by all touch-tone telephones. Key in the

DTMF string, or search for it in contacts. You can key in the wait character (w) and the pause

character (p) by repeatedly pressing the * key.

Swap—switches between the active call and the call on hold, Transfer to connect a call on

hold to an active call and to disconnect yourself from the calls.

Loudspeaker—activates the loudspeaker during a call. Do not hold the phone to your ear

during loudspeaker operation. To activate the loudspeaker, open the keyboard or, if the

keyboard is closed, select Options > Loudspeaker or select Loudsp., if available.

During a call with the keyboard open, you can select Handset to deactivate the loudspeaker

or close the keyboard. When the keyboard is closed, select Options > Handset or select

Handset, if available to deactivate the loudspeaker.

The loudspeaker is deactivated automatically when you end a call (or a call attempt), when

you connect a compatible hands-free unit or a headset to the phone, or when you close the

keyboard.

If you have connected a compatible hands-free unit or a headset to the phone, the Handset

option is replaced with Handsfree or Headset and the selection key Handset is replaced

with Handsfr. or Headset respectively.

Text entry

5 Text entry

Your phone is specifically designed for easy and comfortable text writing. The easiest way

to write is using your thumbs to type on the messaging keyboard. You can start writing a

message using the keyboard, close the keyboard and continue writing with either traditional

or predictive text input. Predictive text input is not available when the keyboard is open.

•WRITE TEXT WITH THE KEYBOARD OPEN

When the keyboard is open, you can start to write a message in several ways.

• Select Menu > Messages > Text messages > Create message.

• Move the joystick to the left in the standby mode.

• Press any of the letter keys in the standby mode (except the pause character p or the

waiting character w) to open Notes.

AVAILABLE FUNCTIONS

The following functions are available when writing text with the keyboard open:

• To insert a number, press a number key. (If you pressing a number key in the standby

mode, it initiates a normal call procedure.)

• To switch between the lower and upper case, indicated by , or on

the top left of the display, or to key in symbols, press the Shift keys on the keyboard.

You can either press a Shift key and the desired character consecutively, or press and

hold a Shift key and the desired letter key at the same time.

• To write in upper case only, press one of the Shift keys twice.

• To delete characters from the display, press the Backspace key or select Clear. Press the

Backspace key briefly to clear one character at a time. Use a longer keypress to delete

characters more quickly.

• To add a space, press one of the Space keys at the bottom of the keyboard.

• To create a line break, press the Enter key.

TYPING ACCENTED CHARACTERS

The characters available depend on the language selected in the Phone language menu. To

type accented characters or symbols that are not printed on the keyboard, do one of the

following:

• To access a set of punctuation marks, accented characters, and symbols, press the

Character key. Scroll through the character set by moving the joystick, and select Insert

to enter the selected character.

• To type an accented character that is not included in the list of special characters under

the Character key, such as á, press and hold the Character key and simultaneously

press “a” repeatedly until the desired accented variant of “a” appears on the display.

•WRITE TEXT WITH THE KEYBOARD CLOSED

When the keyboard is closed, you can enter text using the traditional keypad method. You

can also use predictive text to

Set predictive text on or off

Predictive text anticipates the words you are typing to make text entry more efficient. This

feature is available when the keyboard is closed.

To use the dictionary, select Options > Dictionary when writing or editing text. Then, select

a language from the dictionary options list. Predictive text input is only available for the

languages on the list.

To revert to traditional text input, select Dictionary off.

To quickly set the predictive text input on or off when writing text, press the # key twice,

or press and hold Options.

Predictive text

You can key in any letter with a single keypress. Predictive text is based on a built-in

dictionary to which you can also add new words. For more instructions for writing text, see

“Tips for writing text” on page 27.

1Start writing a word using the 2–9 keys.

Press each key once for one letter. The word may change after each keystroke. For

example, to write Nokia with the English dictionary selected, press the 6 key once for

N, the 6 key once for o, the 5 key once for k, the 4 key once for i, and the 2 key once

for a. To insert a number while in letter mode, press and hold the desired number key.

2When you have finished writing the word and it is correct, confirm it by pressing the 0

key to add a space or by moving the joystick to the right.

3If the word is not the one you are looking for, press the * key repeatedly or select

Options > Matches.

4When the word you want appears, confirm it.

If the ? character appears after the word, the word that you intended to write is not in

the dictionary.

5To add a word to the dictionary, select Spell, key in the word (traditional text input is

used) and select Save.

When the dictionary becomes full, the new word replaces the oldest one that was

added.

6Start writing the next word.

Text entry

COMPOUND WORDS

Key in the first part of the word and confirm it by moving the joystick to the right. Write

the last part of the word and confirm it by moving the joystick to the right.

Traditional text input

Press a number key 1–9, repeatedly until the desired character appears. The characters

available depend on the language selected in the Phone language menu.

To insert a number while in letter mode, press and hold the desired number key.

• If the next letter you want is located on the same key as the present one, wait until the

cursor appears, or move the joystick to the right and key in the letter.

• To access the most common punctuation marks and special characters, use the 1 key.

Tips for writing text

The following functions may also be available for writing text in predictive or traditional

input:

• To insert a space, press the 0 key.

• To move the cursor to the right, left, up or down, move the joystick respectively.

• To delete a character from the display, select Clear. Press and hold Clear to delete the

characters more quickly.

To delete all the characters simultaneously when writing a message, select Options >

Clear text.

• To insert a word that is not in the dictionary when using predictive text input, select

Options > Insert word. Write the word using traditional text input and select Save. The

word is also added to the dictionary.

• To insert a special character when using traditional text input, press the * key. When

using predictive text input, press and hold the * key, or select Options > Insert symbol.

Move the cursor with the joystick to a character, and select Use to select it.

• You can also scroll to a character by pressing the 2, 4, 6, and 8 keys, and select it by

pressing the 5 key.

The following options are available when writing text messages:

• To insert a phone number while in letter mode, select Options > Insert number. Key in

the number or select Find to search for it in Contacts. When done, select OK.

• To insert a name from Contacts, select Options > Insert contact. To insert a phone

number or a text item attached to the contact name, select Options > View details.

6 The menu

Your phone offers you an extensive range of functions that are grouped into menus. Most

of the menu functions include Help text. To view the Help text, scroll to the menu function

you want and wait 15 seconds. To exit the help text, select Back.

You can view the main menu as a grid of icons or in list view. To change the menu view, see

“Display settings” on page 55

•SCROLL TO A MENU FUNCTION

1To access the menu, select Menu.

2Scroll through the menu by moving the joystick up or down (or right and left if the grid

menu is selected), and press the joystick to select a highlighted menu item. .

3If the menu contains submenus, select the one you want.

4If the selected submenu contains further submenus, repeat step 3.

5Select the setting of your choice.

6Select Back to return to the previous menu level, and Exit to exit the menu.

•MENU SHORTCUTS

Each menu, submenu, and settings option is numbered for quick access. The shortcut

numbers appear the upper corner of the display. If you frequently use a specific menu, you

can key in the shortcut numbers to go directly to that location without scrolling.

To use shortcuts, select Menu and, within 2 seconds, press the sequence of number keys

associated with the menu function you want to view or activate. To access menu functions

in menu 1, press Menu > 1 and then key in the rest of the desired shortcut number. Select

Back to return to the previous menu level and Exit to exit the menu.

Messages

7 Messages

You can read, write, send, and save text, multimedia, and e-mail

messages. All messages are organized in folders.

Before you can send text, picture or text (SMS) e-mail messages, you need to save your

message center number. See “Message settings” on page 39. The default setting of the

multimedia message service is generally on.

Note: When sending messages using the SMS network service, your phone may

display “Message sent”. This is an indication that the message has been sent by

your phone to the message center number programmed into your phone. This is not

an indication that the message has been received at the intended destination. For

more details about SMS services, check with your service provider.

The appearance of a multimedia message may vary depending on the receiving device.

•TEXT MESSAGES (SMS)

You can use SMS (short message service) to send and receive multipart messages that

consist of several ordinary text messages. This feature requires network services. See your

service provider for more information about service availability and pricing.

Your phone allows you to send text messages beyond the normal 160-character limit. If your

message exceeds 160 characters, it is sent as a series of two or more messages. In the

navigation bar, you can see the message length indicator counting backwards from 160. For

example, 10 (2) means that you can still add 10 characters for the text to be sent as two

messages.

Using special (Unicode) characters, such as ë, â, á, ì, takes up more space. If there are special

characters in your message, the indicator may not show the message length correctly.

Before the message is sent, the device tells you if the message exceeds the maximum length

allowed for one message. You can cancel sending by pressing Cancel or you can save the

message in the inbox.

You can also send and receive text messages that contain pictures. This feature must be

supported by your network services or service provider. Only phones that offer picture

message features can receive and display picture messages. The text messages function uses

shared memory.

Write and send a message

In the standby mode, you can move the joystick to the left to start writing a message

quickly.

The number of available characters /the current part number of a multipart message are

shown on the top right of the display (such as 120/2).

1Select Menu > Messages > Text messages > Create message.

2Key in your message.

3To send the message, press the Send key.

4Enter the recipient’s phone number or search for it in Contacts, and select OK.

Options when sending a message

After you have written a message, select Options > Sending options to choose from the

following options:

Send to many—to send a message to several recipients. When you have sent the message

to all the intended recipients, select Done.

Send to list—to send a message using a distribution list.

Sending profile—to send a message using a message profile.

Write and send SMS e-mail

Before you can send an e-mail using SMS, you need to save the settings for sending e-mail.

For availability and subscription to the e-mail service, contact your service provider.

1Select Menu > Messages > Text messages > Create SMS e-mail.

2Key in the recipient’s e-mail address or search for it in Contacts, and select OK.

3If you wish, you can key in a subject for the e-mail and select OK.

4Key in the e-mail message.

The total number of characters that you can key in is shown on the top right of the

display. The e-mail address and subject are included in the total number of characters.

Also see “Text and picture templates” on page 32. Pictures cannot be inserted.

5To send the e-mail, press the Send key.

If you have not saved the settings for sending e-mail, the phone prompts you to enter

the number of the e-mail server. Key in the information and select OK to send the

e-mail. Note: When sending e-mails using the SMS network service, your phone may

display the words Message sent. This is an indication that the e-mail has been

sent by your phone to the e-mail server. This is not an indication that the

e-mail has been received at the intended destination. For more details about

e-mail services, check with your service provider.

Read and reply to SMS messages or SMS e-mail

When you receive a message or an e-mail, the new message icon and the number of

new messages followed by message(s) received is shown.

Messages

The blinking icon indicates that the message memory is full. Before you can receive

new messages, delete some of your old messages from the Inbox folder.

1Select Show to view the new message. You can also select Exit to view it later. Later,

you can view the message by selecting Menu > Messages > Text messages > Inbox.

2If more than one message has been received, select the one that you want to read.

An unread text message is indicated by in front of it.

3While reading or viewing the message, you can select from a series of basic options,

such as Delete, Forward, Edit (as a text message or an e-mail), Rename, or Move. You

can also select one of the following options:

Copy to calendar—to copy text from the beginning of the message to your calendar as

a memo for the current day.

Message details—to view, if available, the sender’s name and phone number, the

message center used, and the date and time of receipt.

Use detail—to extract numbers, e-mail and Web site addresses from the current

message.

Save picture—(when viewing a picture message), to save the picture in the Templates

folder.

4Select Reply to reply to a message.

5Select Original text to include the original message in the reply, or select a standard

answer to be included in the reply, or select Empty screen.

When replying to an e-mail message, confirm or edit the e-mail address and subject

first. Then write your reply message.

6Press the Send key to send the message to the displayed number.

Inbox and sent items folders

The phone saves incoming text messages in the Inbox folder and sent messages in the Sent

items folder of the Text messages submenu.

Text messages that you wish to send later can be saved in the Archive, My folders, or

Templates folder.

•ARCHIVE FOLDER AND CUSTOM FOLDERS

To organize your messages, move them to the Archive folder or add new folders for your

messages.

While reading a message, select Options > Move and select the folder to which you want

to move the message.

To add or delete a folder, select Menu > Messages > Text messages > My folders.

• To add a folder, select Options > Add folder. If you have not saved any folders, select

Add to create one.

• To delete a folder, locate the folder that you want to delete and select Options > Delete

folder.

•TEXT AND PICTURE TEMPLATES

Your phone includes text templates, indicated by , and picture templates, indicated by

To access the template list, select Menu > Messages > Text messages > Templates.

• To insert a text template into a message or an e-mail, select Options > Use template

and select the template you want to insert.

• To insert a picture into a text message, select Options > Insert picture and select a

picture to view it. Select Insert to insert the picture into your message. The icon

in the header of the message indicates that a picture has been attached. The number

of characters allowed in the message depends on the size of the picture.

• To view the text and the picture together before sending the message, select Options >

Preview.

•MANAGE DISTRIBUTION LISTS

If you send messages frequently to a fixed group of people, you can define and save

distribution lists. The phone sends the message separately to each recipient on the list, so

sending a message using a distribution list may cost more than sending a message to one

recipient.

Make sure that each contact you want to add to the distribution lists is already set up in

your phone. Use these steps to set up and name distribution lists.

1In the standby mode, select Menu > Messages > Text messages > Distribution lists.

If you have created distribution lists, the current list appears. If you have not yet

created a list, Add appears.

2To create a distribution list, select Add if it’s the first list, or select Options > Add for

a new list.

3Key in a name for the list and select OK.

4To add names to the list, select the list; then select View > Add to open Contacts list.

Select the desired contact.

Use these steps to manage and edit lists.

1To work with a list, select the list name and select Options; then choose from the

following options:

Messages

•Add List—to create a new list.

• Rename List—to change the name of a list.

•Clear List—to empty the list of names.

• Delete List—to delete the list entirely.

2To access the names on a list, locate the desired list and select View. Then choose from

the following options:

•To view the contact information for a recipient, locate the desired name, select

Options > View details.

•To delete a recipient from the list, locate the desired name, select Options >

Delete contact.

•TEXT MESSAGE COUNTER

The text message counter shows the number of sent and received text and picture messages.

Picture messages may consist of more than one message. You can view the recipient or

sender of the message, or view the details of the message.

•MULTIMEDIA MESSAGES

A multimedia message can contain text and one image, sound clip, video clip or a slide. This

function can be used only if it is supported by your service provider. Only phones that offer

compatible multimedia message features can receive and display multimedia messages.

The phone supports multimedia messages that are up to 100 kB in size. If the message

contains an image, the phone scales it down to fit the display area. If the maximum size is

exceeded, the phone may not be able to receive the message. Some service providers send

a text message with a link or Internet address where you can view the multimedia message.

Note: If Allow multimedia reception is set to Yes or In home network, your

operator or service provider may charge you for each message you receive.

Multimedia messaging works with the following formats:

• Picture: JPEG, GIF, WBMP, BMP, PNG, and OTA-BMP

• Sound: scalable polyphonic MIDI (SP-MIDI), AMR audio and monophonic ringing tones

• Video clips in H.263 format with SubQCIF image size and AMR audio

The phone does not necessarily support all variations of the listed file formats. If a received

message contains any unsupported elements, they may be replaced with the file name and

the text Object format not supported.

You cannot receive any multimedia messages if you have a call in progress, a game or

another Java application running, or if you have an active browsing session over GSM data.

Because delivery of multimedia messages can fail for a variety of reasons, do not rely solely

upon them for essential communications.

Your phone allows you to send and receive multimedia messages that contain several pages,

or slides. To insert a slide into a message, select Options > Insert > Slide. Each slide can

contain text, one image and one sound clip. To move the text part to the top or bottom of

the message, select Options > Text on top or Options > Text on bottom.

copied, modified, transferred or forwarded.

Write and send a multimedia message

To define the settings for multimedia messaging, see “Settings for multimedia messages” on

page 40. For information about subscribing to multimedia messaging services, contact your

service provider.

copied, modified, transferred or forwarded.

1Select Menu > Messages > Multimedia msgs. > Create message.

2Key in a message.

•To add a file to the message, select Options > Insert.

•Select Image, Sound clip, Video clip, or Slide.

•Open the folder that contains the item you want to add to the message, locate the

desired file, and select Options > Insert.

An attached file is indicated by the file name in the message.

3To insert a name from Contacts, select Options > More options > Insert contact, and

select the desired name.

4To insert a number, select Options > More options > Insert number. Key in the number

or search for it in Contacts, and select OK.

5To view the message before sending it, select Options > Preview.

6Press the Talk key to send the message, or select Options > Send to e-mail or Send to

many.

7Enter the recipient’s phone number (or e-mail address) or search for it in Contacts.

8Select OK.

It takes more time to send a multimedia message than a text message. While the

multimedia message is being sent, the animated icon is displayed and you can use

other functions on the phone. If there is an interruption while the message is being

sent, the phone makes a few more attempts to send it. If this fails, the message remains

Messages

in the Outbox folder and you can try to send it later.

Sent messages are saved in the Sent items folder if the setting Save sent messages is

set to Yes. (See “Settings for multimedia messages” on page 40.) This is not, however,

a confirmation that the message has been received at the intended destination.

Read and reply to a multimedia message

When your phone is receiving a multimedia message, the animated icon is displayed.

When the message has been received, the icon and the text Multimedia message

received are shown.

The blinking icon indicates that the memory for multimedia messages is full, see

“Multimedia messages memory full” on page 36.

1Select Show to view the message, or select Exit to view it later.

(To read the message later, select Menu > Messages > Multimedia msgs. > Inbox.)

The function of the middle selection key changes according to the displayed object.

2Choose from the following:

•To reply to the message, select Reply.

•To delete an object contained in the message, select Delete. Otherwise, select

Options > Delete message.

•To listen to a sound clip or view a video clip contained in the message, select Play.

•To zoom in on an attached image, select Zoom.

If you select Options, some of the following options are available:

Delete message—deletes a saved message.

Reply or Reply to all—lets you reply to the message.

Use detail—extracts phone numbers, e-mail addresses, or Web addresses from the

message.

Forward to no., Forward to e-mail or Send to many—forwards the message.

Edit—edits a message that you have written.

Message details—displays the subject, size and class of the message.

Details—displays the details of the attached image or sound.

Play presentation—displays the presentation attached in the message.

Save image, Save sound clip or Save video clip—saves the file in the Gallery.

Inbox, Outbox, Saved and Sent items folders

The phone saves multimedia messages that have been received in the Inbox folder of the

Multimedia msgs. submenu.

Multimedia messages that are waiting to be sent are stored in the Outbox folder of the

Multimedia msgs. submenu.

Multimedia messages that you wish to save and send later can be saved in the Saved items

folder of the Multimedia msgs. submenu.

Multimedia messages that have been sent are saved in the Sent items folder of the

Multimedia msgs. submenu, if the setting Save sent messages is set to Yes. (For more

information see “Settings for multimedia messages” on page 40.)

MULTIMEDIA MESSAGES MEMORY FULL

When you have a new multimedia message waiting and the memory for the messages is

full, the icon blinks and Multimedia memory full, view waiting msg. is shown. To view

the waiting message, select Show. To save the message, select Save and delete old messages

by first selecting the folder and then the message to be deleted.

To discard the waiting message, select Exit > Yes. If you select No, you can view the

message.

•DELETE MESSAGES

To delete text messages, select Menu > Messages > Text messages > Delete messages.

Then choose from the following options:

All messages—to delete all messages from all folders. If there are unread messages, the

phone prompts you to confirm you want to delete these also.

Inbox—to delete all messages in the Inbox.

Sent items—to delete all messages in the Sent folder.

Archive—to delete all messages in the Archive folder.

•E-MAIL MESSAGES

The e-mail features allow you to access your e-mail account using your phone. The

compatible e-mail application that you use in the office or at home must use POP3 and

IMAP4 e-mail servers.

Note: When sending e-mail, your phone may display the words Message sent. This

is an indication that the e-mail has been sent by your phone to the e-mail server.

This is not an indication that the e-mail has been received at the intended

destination. For more details about e-mail services, check with your service

provider.

Messages

Before you can send and retrieve e-mail, you may need to do the following:

• Obtain a compatible e-mail account. For details on compatibility, contact an e-mail

service provider.

• For the settings required for e-mail, contact your service provider. For receiving the e-

mail settings over the air, see “Over-the-air settings service” on page 21.

• Activate the e-mail service settings that you have obtained from the e-mail service

provider. To activate the settings, select Menu > Messages > Settings > E-mail

settings.

• To set the e-mail settings on your phone, select Menu > Messages > E-mail > Other

options > Settings. See “E-mail settings” on page 41.

Write and send e-mail

You can write your e-mail message before connecting to the e-mail service, or connect to

the service first, and then write and send your e-mail.

1Select Menu > Messages > E-mail > Create e-mail.

2Key in the recipient’s e-mail address and select Options > OK.

3To search for the e-mail address in contacts, select Options > Find > OK.

4Key in a subject for the e-mail, and then select Options > OK.

5Key in the e-mail message.

The number of characters that you can key in is shown on the top right of the display.

6To send the e-mail message, select Options > Send e-mail, and select one of these

options:

Send now—sends the e-mail immediately. If you are connected to the e-mail account,

your phone establishes the connection and then sends the e-mail.

Send later—saves your e-mail in the Outbox folder to send later. To edit or continue

writing your e-mail later, you can save it in Drafts by selecting Save draft msg. When

you are ready to send the e-mail, select Menu > Messages > E-mail > Send now or

Send and retrieve.

Other options in the options list allow you to edit the e-mail or subject, add a copy

recipient or a hidden copy recipient, exit the editor or use the dictionary.

Download e-mail from your e-mail account

If message memory is full, delete some of your older messages before you start to download

new messages.

1Do one of the following:

•To download new messages, select Menu > Messages > E-mail > Retrieve.

∞To send messages that are in your Outbox folder at the same time you download

new messages, select Menu > Messages > E-mail > Send and retrieve.

2Select any messages you want to view in the Inbox, or press Back to view it later.

Unread text messages are indicated by .

Read and reply to an e-mail message

1Select Menu > Messages > E-mail > Inbox.

2Display the desired message and select Options.

3Select Reply to reply to an e-mail. Select Original text to include the original message

in the reply or select Empty screen.

When replying to an e-mail, first confirm or edit the e-mail address and subject; then

write your reply.

4Select Options > Send e-mail > Send now to send the message.

`E-mail menu folders

Your phone has the following folders in the E-mail menu:

Inbox—for saving e-mail messages that you have downloaded from your e-mail account.

Outbox—for saving e-mail messages that have not been sent if you have selected Send later

(see “Write and send e-mail” on page 37).

Deleted items—for e-mail messages that have been deleted.

Sent items—for saving e-mail messages that have been sent.

Drafts—for saving unfinished e-mail messages.

Archive—for organizing and saving your e-mail messages.

Options for an e-mail application

Select Menu > Messages > E-mail, and select one of the following options:

•Connect via—activates the network connection settings for your e-mail function.

Select Application to activate the settings that are used for the e-mail application or

select Default to confirm that your e-mail function uses the same settings as your

browser. See “Key in the service settings” on page 84. Contact your e-mail service

provider for more information.

•Details—displays additional information about the application.

•VOICE MESSAGES

The voice mailbox is a network service. For more information, contact your service provider.

Select Menu > Messages > Voice messages, and select one of the following options:

Note: You can also press and hold the 1 key to call your mailbox. This shortcut is

available with the keyboard open or closed.

Messages

•Listen to voice messages to call your voice mailbox at the phone number that you have

saved in the Voice mailbox number menu. If you have two phone lines available

through your network service, each phone line may have its own voice mailbox number.

For more information, see “Call settings” on page 61.

•Voice mailbox number to key in, search for or edit your voice mailbox number and

select OK to save it.

If supported by the network, the icon indicates there are new voice messages. Select

Listen to call your voice mailbox number.

•INFO MESSAGES

Info messages is a network service that provides informational messages from your service

provider on various topics. For availability, topics and the relevant topic numbers, contact

your service provider.

•MESSAGE SETTINGS

The message settings affect the sending, receiving and viewing of messages.

Settings for SMS text and e-mail messages

1Select Menu > Messages > Message settings > Text messages > Sending profile.

2If more than one message profile set is supported by your SIM card, select the set that

you want to change.

Message center number—to save the phone number of the message center that is

required for sending text messages. You will receive this number from your service

provider.

Messages sent via—to select the message type: Text, E-mail, Paging or Fax.

Message validity—to select the length of time for which the network should attempt

to deliver your message.

Default recipient number (for message type Text)—to save a default number for

sending messages for this message profile.

E-mail server (for message type E-mail)—to save the e-mail server number.

Delivery reports—to ask the network to send delivery reports about your messages

(network service).

Use GPRS > Yes—to set GPRS as the preferred SMS bearer. Also set the GPRS

connection setting to Always online. (See “EGPRS” on page 60.)

Reply via same center—to allow the message recipient to send you a reply by way of

your message center (network service).

Rename sending profile—to change the name of the selected message profile. The

message profile sets are only displayed if your SIM card supports more than one set.

Overwrite settings

When the text message memory is full, the phone cannot receive or send any new messages.

However, you can set the phone to automatically replace old text messages in the Inbox and

Sent items folders with new ones.

Select Menu > Messages > Message settings > Text messages, and select either

Overwriting in inbox or Overwriting in sent items and Allowed.

Settings for multimedia messages

You may receive the multimedia connection settings as an over-the-air message from the

service provider. To receive the settings over the air, see “Over-the-air settings service” on

page 21.

To key in the settings manually, select Menu > Messages > Message settings > Multimedia

msgs., and set up the following items:

Save sent messages > Yes—to set the phone to save sent multimedia messages in the Sent

items folder. If you select No, the sent messages are not saved.

Delivery reports—to ask the network to send delivery reports about your messages (network

service).

Scale image down—to define the image size when you insert the image to the multimedia

message.

Default slide timing—to set the timing for slides in multimedia messages.

Allow multimedia reception > No, Yes, or In home network—to use the multimedia service.

If you select In home network, you cannot receive multimedia messages outside your home

network.

Incoming multimedia messages > Retrieve—to set the phone to automatically fetch newly

received multimedia messages. Select Reject if you do not wish to receive multimedia

messages.

Connection settings—to define connection settings for retrieving multimedia messages.

First select Active multimedia settings, and activate the set in which you want to save the

settings. Select Edit active multimedia settings and edit the active settings.

Select each of the settings one by one and key in all the required settings. Contact your

service provider for the settings.

Allow adverts—to receive or reject advertisements. The setting is not shown if Allow

multimedia reception is set to No.

Messages

•E-MAIL SETTINGS

You may receive the e-mail connection settings as an over-the-air message from the service

provider. For receiving the settings over the air, see “Over-the-air settings service” on

page 21. For keying in the settings manually, select Menu > Messages >

Message settings > E-mail messages > Active e-mail settings.

You must first activate a mailbox. Select Mailbox in use and activate the mailbox for which

you want to save the settings. Select Activate > Edit active e-mail settings and edit the

settings.

Select each of the settings one by one and key in all that are required. Contact your or

e-mail service provider for the settings.

Mailbox name—key in the name that you want to use for the mailbox.

E-mail address—key in your e-mail address.

My name—key in your name or nickname if you want the recipient to see it.

Outgoing (SMTP) server—key in the address of the e-mail server.

Outgoing (SMTP) port—key in the number of the e-mail server port for outgoing e-mail.

The most common default value is 25.

Use SMTP authorization—if your e-mail service provider requires authentication for

sending e-mails, set the setting to on. You must also define your SMTP user name and

SMTP password.

SMTP user name—key in the user name for outgoing mails that you have obtained from

your e-mail service provider.

SMTP password—key in the password that you want to use for outgoing mails. If you have

not defined a password, you may be asked to define one when your phone connects to your

e-mail account.

Include signature—confirm your selection if you want to add a predefined signature to your

e-mail.

Incoming (POP3/IMAP) server—key in the e-mail server address for incoming e-mail (either

POP3 or IMAP4)

Incoming (POP3/IMAP) port—key in the port number that you have obtained from your e-

mail service provider.

POP3/IMAP user name—key in the user name to access the mailbox. If you have not defined

your SMTP user name, the e-mail server uses this user name instead.

POP3/IMAP password—key in the password to access the mailbox. If you have not defined

your SMTP password, the e-mail server uses POP3/IMAP password instead.

Reply-to address—key in the e-mail address to which you want the replies to be sent, if it

differs from your e-mail address.

Incoming server type > POP3 or IMAP4—if both types are supported, select IMAP4.

Changing the server type also changes the incoming port number.

Secure login APOP > On—if your connection requires an encrypted login, otherwise leave

it to Off. Contact your service provider if in doubt. This option is only shown, if you have

selected POP3 as your mailbox type. Using encrypted login enables increased security for

user names and passwords. It does not increase security for the connection itself

Retrieve mails—key in the number of e-mails that you want to retrieve at a time.

•FONT SIZE SETTING

To select the font size for reading and writing messages, select Menu > Messages >

Message settings > Other settings > Font size.

•SERVICE COMMANDS

Select Menu > Messages > Service commands. Key in and send service requests (also

known as USSD commands), such as activation commands for network services, to your

service provider.

Call log

8 Call log

The phone records the phone numbers for missed, received and dialed

calls, and the approximate length of the calls.

The phone records missed and received calls only if the network supports these functions.

The phone must also be switched on and within the network service area.

When you select Options in the Missed calls, Received calls, and Dialed numbers menu,

you can view the date and the time of the call, edit or delete the phone number from the

list, save the number in Contacts, or send a message to the number.

•RECENT CALL LISTS

Select Menu > Call log, and one of the following options:

Missed calls—to view the list of the last 20 phone numbers from which somebody has tried

to call you (network service). The number in front of the name or phone number indicates

the number of call attempts from that caller.

When a note about missed calls is displayed, select List to access the list of phone numbers.

Scroll to the number you would like to call back and press the Send key.

Received calls—to view the list of the last 20 phone numbers from which you have most

recently accepted calls (network service).

Dialed numbers—to view the list of the last 20 phone numbers that you have most recently

called or attempted to call. See also “Last number redial” on page 22.

Delete recent call lists—to delete the recent calls lists. Select whether you want to delete

all the phone numbers in the recent calls lists, or only the numbers in the missed calls,

received calls or dialed numbers lists. You cannot undo the operation.

•TIMERS AND COUNTERS

Timers and counters maintain useful information about phone activity.

Note: The actual invoice for calls and services from your service provider may vary,

depending upon network features, rounding-off for billing, taxes and so forth.

Select Menu > Call log > Timers and counters, and one of the following options:

•Call timers—scroll to view the approximate duration of your incoming and outgoing

calls in hours, minutes, and seconds. The security code is required to clear the timers.

If you have two phone lines available (network service), each phone line has its own

call duration timers. The timers of the selected line are displayed.

•GPRS data counter.—scroll to check the size of data that was sent or received in bytes,

sent and received data in total, and to clear the counters. The security code is required

to clear the counters.

•GPRS connection timer.—scroll to check the duration of the last GPRS connection or

the total GPRS connection time. You can also clear the timers. The security code is

required to clear the timers.

Note: Timers and counters may be reset if you have your phone repaired.

Contacts

9 Contacts

You can save names and phone numbers (contacts) in both the phone

memory and in the SIM card memory.

You may save up to 500 names with numbers and text notes for each name in the phone

memory. You can also save an image for a certain number of names. The number of names

that can be saved depends on both the length of the names, and the number and length of

the phone numbers and text items.

The phone supports SIM cards that can save up to 250 names and phone numbers. Names

and numbers that are saved in the SIM card memory, are indicated by .

Using presence you can publish your current availability status to communicate to anyone

who has access to this service and who is requesting this information. You can view the

availability status of any of the contacts that you have subscribed to in the Subscribed

names menu and in the detailed view of a name in Contacts.

•CONTACTS SETTINGS

Select Menu > Contacts > Settings, and one of the following options:

Memory in use—to select the memory, either SIM card or phone, that you want to use for

your contacts. To recall names and numbers from both memories for contacts, select Phone

and SIM. In this case, the names and numbers will be saved in the phone memory.

Contacts view—to select how the names, numbers and images in contacts are displayed.

Memory status—to view how much free memory is available for both memories for

contacts.

•ADD CONTACTS

Names and numbers will be saved in the memory in use.

1Select Menu > Contacts > Add contact.

2Key in the name and select OK.

3Key in the phone number, and select OK.

4When the name and number have been saved, select Done.

Note: To quick save in the standby mode, key in the phone number and select

Save. Key in the name, select OK > Done.

Save multiple numbers and text items per contact

You can save different types of phone numbers and short text items for each name in the

phone memory that is allocated for contacts.

The first number saved is automatically set as the default number and it is indicated by a

frame around the number type icon, for example . When you select a name from

contacts the default number is used unless you select another number.

1Make sure that the memory in use is either Phone or Phone and SIM.

2To access the list of names and phone numbers, move the joystick down in the standby

mode.

3Select the desired name and select Details > Options > Add number or Add detail.

4To add a number or detail, select one of the number types or text types, respectively.

•For the User ID—select Search to search for an ID by a mobile phone number or an

e-mail address in the server of the operator or service provider if you have

connected to the presence service. If only one ID is found, it is automatically saved.

Otherwise, to save an ID, select Options > Save.

•To key in the ID, select Enter ID manually. Key in the ID and select OK to save it.

•To change the number or text type, select Change type in the options list. (You

cannot change the type of an ID when it is on the IM contacts or in the Subscribed

names list.)

•To set the selected number as the default number, select Set as default.

5Key in the number or text item and select OK to save it.

6Select Back > Exit to return to the standby mode.

Add an image to a name or number

You can add an image to a name or number saved in the phone memory. The image must

be one of the supported formats (JPEG, GIF, WBMP, BMP, PNG, and OTA-BMP).

Move the joystick down in the standby mode, scroll to the name (and number), and select

Details. > Options > Add image. The phone opens the list of folders in the Gallery. Scroll

to the desired image, and select Options > Save to contacts.

•SEARCH FOR A CONTACT

1Select Menu > Contacts > Find, or move the joystick down in the standby mode.

2Key in the first characters of the name that you are searching for in the pop-up window.

Move the joystick up or down to scroll through the names in the list, and right or left

to move the cursor in the pop-up window

Contacts

3Scroll to the desired contact, and select Details.

4Scroll to view the details of the selected contact.

Depending on the Contacts view setting in “Contacts settings” on page 45, the

subscribed contacts are shown differently. Either only the availability icon or the

availability icon, personal logo and the status message are shown.

5Select Details to view all dynamic information.

To view the status message in full, select Details and press and hold the * key at the dynamic

contact while scrolling through the contact names.

•DELETE CONTACTS

Select Menu > Contacts > Delete to delete a contact and the details attached to it.

If the contact has an ID on the IM contacts or in the Subscribed names list, the note

Presence information will be deleted is shown before the contact is deleted.

• To delete names and numbers one by one, select One by one and scroll to the name

(and number) that you want to delete. Select Delete > Yes.

• To delete contacts all at once, select Delete all, scroll to one of the memory locations

(Phone or SIM card), and select Delete. Select Yes. Confirm the deletion using the

security code.

•EDIT OR DELETE DETAILS IN CONTACTS

Move the joystick down in the standby mode, scroll to the contact that you want to edit or

delete and select Details. Scroll to the name, number, text item or image that you want to

edit or delete, and select Options.

• To edit a name, number or text item or to change an image, select Edit name, Edit

number, Edit detail, or Change image. (You cannot edit or delete an ID when it is on

the IM contacts or in the Subscribed names list.)

• To delete a number or text item, select Delete number or Delete detail.

• To delete an image which is attached to the contact, select Delete image. Deleting an

image from contacts does not delete it from Gallery.

•MY PRESENCE

My presence is a network service that provides enhanced communication services that you

can share with others, such as your family, friends and colleagues. You can share your

current presence status with those who have access to the service and request it. The

requested information is shown in Subscribed names in the viewers Contacts menu. You

can control and personalize the information that you want to share with others, and control

the list of persons who can view your presence status.

For the availability of the presence service, contact your service provider. You need to access

the presence service before you can share your presence status with others. Other viewers

need access to the presence service and a compatible phone to share your presence status.

Select Menu > Contacts > My presence, and one of the following options:

Connect to My presence service (or Disconnect)—to connect to or disconnect from the

service.

My current presence—to change your presence status. Choose from the following options:

•View current presence and select Private presence or Public presence to view your

current private or public status.

•My availability to set your availability status to Available indicated by , Busy

indicated by , or Not available indicated by .

•My presence message and key in the text to be shown to other persons or select

Options > Previous msgs. and select an old message as the status message.

•My presence logo to select the default logo of the availability status or personalize one

from the Graphics folder in the Gallery.

•Show to to select the groups with whom you want to share or not to share your

presence status. Select Private and public, Private viewers or No one.

Current viewers and select:

•Current viewers to view all the persons who have subscribed to your presence

information.

•Private list to view the list of the persons who are allowed to view your personalized

presence information.

•Blocked list to view all the persons you have blocked from viewing your presence

information.

Settings and select:

•Show current presence in idle to show the current status icon in the standby mode.

•Synchronize with profiles to select whether you want to link My presence message

and My availability manually or automatically to the currently active profile. (You

cannot link a personalized status logo to a Profile.)

•Connection type to set the phone to automatically connect to the service when the

phone is switched on.

•Network settings. (See “IM and my presence settings” on page 54.)

Contacts

Subscribed contacts

You can create a list of contacts whose presence status you want to monitor. You can view

the information (if the contacts allow you to view it) and if it is not prevented by the

network. You can view subscribed contacts either by scrolling through the contacts or by

viewing the Subscribed names menu.

Make sure that the memory in use is either Phone or Phone and SIM. See “Contacts

settings” on page 45.

To connect to the Presence service, select Menu > Contacts > My presence > Connect to

My presence service. You can also view the subscribed contacts when you are not

connected to the presence service, but you cannot see the presence status of the contact.

Add contacts to the subscribed contacts

1Select Menu > Contacts > Subscribed names. If you have not connected to the

Presence service, the phone asks if you want to connect now.

2If you have no contacts on your list, select Add. Otherwise, select Options > Subscribe

new. The list of contacts is shown.

3Select a contact from the list and if the contact has an ID saved, the contact is added

to the subscribed contacts list. If there are more than one ID, select one of them. After

subscription to the contact, Subscription activated is shown.

To subscribe to a contact from Contacts list, move the joystick down in the standby mode

and scroll to the contact that you want to subscribe to. Select Details > Options. To

subscribe, select Request presence > As subscription.

If you only want to view the presence information without subscribing to a contact, select

Request presence and One time only.

View subscribed contacts

See also “Search for a contact” on page 46 to view the presence information.

1Select Menu > Contacts > Subscribed names.

The status information of the first contact on the dynamic contacts list is shown and

it may include text and some of the following icons:

, or indicate that the person is available, busy, or not available.

indicates that the person’s presence information is not available.

2Scroll to the desired contact and select Details to view the details of the selected

contact. If you select Options, you can select from the following:

• Subscribe new to add a new contact to the list of subscribed contacts.

•IM to start a chat conversation.

•Send message to send a text message to the selected contact.

•Send e-mail to send an e-mail to the selected contact.

•Send bus. card to send a business card.

• Unsubscribe to remove the selected contact from the list of subscribed contacts.

Unsubscribe a contact

To unsubscribe a contact from the Contacts list, move the joystick down in the standby

mode and scroll to the contact that you want to unsubscribe. Select Details, select the ID,

and select Options. To unsubscribe, select Unsubscribe and select OK to confirm.

To unsubscribe using the Subscribed names menu, see “View subscribed contacts” on

page 49.

•COPY CONTACTS

You can copy names and phone numbers from the phone memory to your SIM card memory

and vice versa. Any text items saved in the phone memory, such as e-mail addresses, will

not be copied to the SIM card.

1Select Menu > Contacts > Copy.

2Select the method, From phone to SIM card or From SIM card to phone.

3Select One by one, All or Primary numbers.

Primary numbers is shown if you copy from the phone to the SIM card. Only the

primary numbers will be copied.

4To keep or delete the original names and numbers, select Keep original or Move

original.

•SEND AND RECEIVE BUSINESS CARDS

You can send and receive a person’s contact information from a compatible device as a

business card.

When you have received a business card, select Show > Save to save the business card in

the phone memory. To discard the business card, select Exit > OK.

To send a business card, search for the name and phone number you want to send from

contacts, select Details > Options > Send bus. card. Select Via infrared, Via text message

(network service), or Via Bluetooth.

•SPEED DIALING

To assign a number to a speed dialing key, use the following steps:

Contacts

1Select Menu > Contacts > 1-touch dialing and scroll to the desired speed dialing key

number.

2Select Assign.

If a number has already been assigned to the key, select Options > Change.

3Select Find, and select first the name and then the number you want to assign.

If the 1-touch dialing function is off, the phone gives you the option to activate it.

To make a call using the speed dialing keys, see “Speed dial a phone number” on page 23.

•VOICE DIALING

You can make a phone call by saying a voice tag that has been added to a phone number.

Any spoken word or words, such as a person’s name, can be a voice tag. You can add up to

10 voice tags.

Note: Using voice tags may be difficult in a noisy environment or during an

emergency, so you should not rely solely upon voice dialing in all circumstances

Before using voice dialing, review the following information:

• Voice tags are not language dependent. They are dependent on the speaker's voice.

• Voice tags are sensitive to background noise. Record them and make calls in a quiet

environment.

• When recording a voice tag or making a call by saying a voice tag, hold the phone in

the normal position near to your ear.

• Very short names are not accepted. Use long names and avoid similar names for

different numbers.

Note: You must say the name exactly as you said it when you recorded it. This may

be difficult in, for example, a noisy environment or during an emergency, so you

should not rely solely upon voice dialing in all circumstances.

Add and manage voice tags

Before you begin, make sure you have the contact names you intend to save with voice tags

set up in the phone memory. You can also add voice tags to the names in the SIM card, but

if you replace your SIM card with a new one, you first need to delete the old voice tags

before you can add new ones. Voice tags use shared memory. For more information, see

“Shared Memory” on page 6.

1In the standby mode, select Menu > Contacts, scroll to the desired contact, and select

Details.

2Select Options > Add voice tag.

3Select Start, and say clearly the words you want to record as a voice tag.

After recording, the phone plays the recorded tag.

4When the voice tag has been successfully saved, Voice tag saved is displayed, a beep

sounds and a symbol appears after the phone number with a voice tag.

To check the voice tags, select Menu > Contacts > Voice tags. Scroll to the contact, select

Options, and select the function you want.

Make a call using a voice tag

If the phone has an application using the GPRS connection that is sending or receiving data,

first end the application to make a call by using voice dialing.

1In the standby mode, press the Right selection key or press and hold Names.

A short tone is heard and Speak now is displayed.

2Say the voice tag clearly.

The phone plays the recognized voice tag and dials the phone number of the voice tag

after 1.5 seconds.

If you are using a compatible headset, press and hold the headset key to start the voice

dialing.

Info numbers and service numbers

Your service provider may have included information numbers or service on your SIM card.

Select Menu > Contacts > Info numbers or Service numbers. Scroll through a category to

an information number, or to a service number and press the Send key to call the number.

•SAVE NUMBERS ON THE SIM CARD

The phone numbers assigned to your SIM card are saved in My numbers if this is allowed

by the card. To view the numbers select Menu > Contacts > My numbers. Scroll to the

desired name or number, and select View.

•CALLER GROUPS

You can arrange the names and phone numbers saved in Contacts into caller groups. For

each caller group, you can select a ringing tone and a logo that is shown on the display

when you receive a call from a phone number in the group. To set the phone to ring only

upon calls from phone numbers belonging to a selected caller group, see Alert for in “Tone

settings” on page 55.

Select Menu > Contacts > Caller groups and select the desired caller group. You can select

from the following functions: Group name, Group ringing tone, Group logo, and Group

members.

Contacts

If you select Group members, select Add, to add a name to the group, if there are no names

in the group. Otherwise, select Options > Add contact.

To remove a name from a caller group, scroll to the desired name, and select Remove.

10 Settings

•PROFILES

Your phone has a group of profiles that allow you to personalize the tone settings of your

phone and to activate a profile for different events and environments. Available profiles are

General, Silent, Meeting, Outdoor, My style 1 and My style 2.

Select Menu > Settings > Profiles and select a profile. Choose from the following options:

• To activate the selected profile, select Activate.

• To activate the profile for a certain amount of time up to 24 hours, select Timed and

set the end time. When the timed profile expires, the previous profile that was not

timed, becomes active.

• To personalize the profile, select Customize. Select the setting that you want to change

and make the changes. The settings can also be changed in the Tone settings menu,

see “Tone settings” on page 55.

• To rename a profile, select Customize > Profile Name. The Normal profile cannot be

renamed.

• To change your presence status, select My presence. The menu is available if you have

set Synchronize with profiles to On, see “My presence” on page 47. Select My

availability to change your availability status and My presence message to edit your

status message.

• To quickly change the profile in the standby mode, press the Power key, scroll to the

profile that you want to activate and press Select.

•IM AND MY PRESENCE SETTINGS

For the settings required for IM, contact your service provider. To receive the IM and

presence settings over the air, see “Over-the-air settings service” on page 21.

KEYING IN THE SETTINGS MANUALLY

1Select Menu > Settings > IM and my presence settings > Active IM and presence

settings.

2Scroll to the set you would like to activate and select Activate.

You must activate the connection set where you want to save the settings. A

connection set is a collection of settings required to make a connection to the IM and

presence services.

3Select Edit active IM and presence sett.

Settings

Select each of the settings one by one and key in all the required information that you

have received from your service provider.

Note: The connection settings are in the Connection settings menu.

•TONE SETTINGS

You can find the same settings in the Profiles menu. The settings you choose also update

the active profile.

Select Menu > Settings > Tone settings, and select from the following options:

Ringing options—to select how the phone notifies you of an incoming voice call.

Ringing tone—to select a tone for incoming voice calls. To select ringing tones that have

been saved in the Gallery, select Open gallery from the ringing tone list.

Ringing volume—to set the tone level for incoming voice calls and incoming messages.

Note: If you download a ringing tone or receive one using OTA, you can save it in

the Gallery.

Vibrating alert—to set the phone to vibrate for incoming voice calls and incoming

messages. The vibrating alert does not work when the phone is connected to a charger, a

desktop stand, or a car kit.

Message alert tone—to set the alert tone for incoming messages.

IM alert tone—to select the alert tone for IM messages.

Keypad tones—to adjust the tone level of keypad.

Warning tones—to set the phone to sound tones, for example when the battery is running

out of power.

Alert for—to set the phone to ring only on calls from phone numbers that belong to a

selected caller group. Scroll to the caller group that you want or All calls and select Mark.

•DISPLAY SETTINGS

Select Menu > Settings > Display settings, and choose from the following options:

Wallpaper—to set the phone to display a background image, known as wallpaper, when the

phone is in the standby mode. Some images are provided in the Gallery menu. You can also

receive images, for example through a multimedia message, or use PC Suite to transfer them

from your PC and then save them in Gallery. Your phone supports JPEG, GIF, WBMP, BMP,

PNG, and OTA-BMP formats, but not necessarily all variations of these formats.

•Select image to open an image folder. Scroll to the desired image you want to set as

wallpaper, select Options > Set as wallpaper.

•On or Off to activate/deactivate the wallpaper. (The wallpaper is not displayed when

the phone activates the screen saver.)

Color schemes—to change the color of some display components, such as icons and signal

bars.

Menu view—to select how the main menu items are displayed on the phone. Select List or

Grid.

Operator logo—to set the phone to show or hide the operator logo. If you have not saved

any operator logos, the Operator logo menu is dimmed. The operator logo is not displayed

when the phone activates the screen saver.

Screen saver timeout—to select the timeout after which the screen saver will be activated.

The length of the timeout can vary from 5 seconds to 60 minutes.

The digital clock screen saver is used for power saving in the standby mode. It activates

when the phone has not been used for a certain length of time while the keyboard is closed.

To deactivate the screen saver, press any key or open the keyboard. The screen saver is also

deactivated when the phone is out of the network coverage area. The screen saver overrides

graphics and text information shown on the display when the phone is in the standby mode.

Display contrast—to change the brightness level of the phone display. Move the joystick to

the left to decrease and to the right to increase the brightness level, and select OK to accept

it.

•TIME AND DATE SETTINGS

Select Menu > Settings > Time and date settings, and select one of the following options:

Clock > Show clock or Hide clock—to show or hide the time on the top right of the display

in the standby mode. Select Set the time to adjust the clock to the correct time, and Time

format to select 12-hour or 24-hour time format.

The clock is also used for the functions Messages, Call log, Alarm clock, timed Profiles,

Calendar, Notes, and screen saver for example.

Note: If the battery is removed from the phone for an extended time, you may need

to reset the time.

Date > Show date or Hide date—to show or hide the date on the display in the standby

mode. Select Set the date to adjust the date. You can also select the date format.

Auto-update of date & time (network service)—to set the phone to automatically update

the time and date according to the current time zone, select On. To set the phone to ask for

confirmation before the update, select Confirm first.

The automatic update of date and time does not change the time you have set for the alarm

clock, calendar or the alarm notes. They are in local time. Updating may cause some alarms

that you have set to expire.

Settings

•PERSONAL SHORTCUTS

You can select the function for the Right selection key displayed in the standby mode.

You have also a list of phone functions which can be activated by saying a voice tag. Up to

five voice tags for the voice commands can be added.

Select Menu > Settings > Personal shortcuts, and select from the following options:

Right selection key—to view the list of available functions for the Right selection key.

Scroll to the function that you want and select it.

Voice commands—to add a command. Select the command folder you want, scroll to the

command to which you want to add a voice tag. Select Options > Add command. If the

command already has a voice tag, the icon is shown. For adding and activating a voice

command, see “Voice dialing” on page 51.

During a call or when an application using the EGPRS connection is sending or receiving

data, you cannot activate or add a voice command.

•CONNECTIVITY AND RELATED SETTINGS

You can connect the phone to a compatible device using an IR or Bluetooth connection. You

can also define the settings for EGPRS dial-up connections. Bluetooth connections and IR

connections cannot be active at the same time.

Bluetooth technology

The phone supports Bluetooth wireless technology which allows you to connect the phone

to a compatible Bluetooth device within approximately 32 feet (10 meters). The Bluetooth

connection can be subject to interference from obstructions such as walls or other

electronic devices.

Note: There may be restrictions on using Bluetooth devices in some locations.

The Nokia 6820 phone is designed to be compliant with and adapt to Bluetooth

Specification 1.1. Compatibility between the phone and other products with Bluetooth

wireless technology depends also on the profiles and protocols used by the devices. The

current profiles supported by the Nokia 6820 phone are:

• SAP (SIM access profile)

• OPP (object push profile) as a client and server

• FTP (file transfer profile) as a server

• DUN (dial-up networking profile) as a gateway

• HSP (headset profile)

• HFP (hands-free profile) as an audio gateway

• SDP (service discovery profile)

• GAP (generic access profile)

• SPP (serial port profile) with the PC connectivity software

• GOEP (generic access exchange profile)

When a profile is active, the profile is shown on the phone display, such as Remote SIM, to

indicate that the phone is disconnected from the GSM network, thereby deactivating all

phone functions.

For compatibility between your phone and another Bluetooth device, consult the

manufacturer of the device. In some locations, there may be restrictions on using Bluetooth

devices. Check with your local authorities.

Note: Using Bluetooth features, or allowing them to run in the background while

using other features, increases the demand on battery power and reduces the

battery life.

Set up a Bluetooth connection

When you activate the Bluetooth application for the first time, you are asked to provide a

Bluetooth name for your phone. This is the name that will be seen by other Bluetooth users.

Use the following steps to activate your Bluetooth connection.

1Select Menu > Settings > Connectivity > Bluetooth.

2Select Bluetooth > On.

The active Bluetooth connection is indicated by at the top of the display.

Note: If you do not plan to use the Bluetooth feature for an extended time

period, deactivate it to save power.

3Select Search for audio enhancements to search for compatible Bluetooth devices.

4Select the device that you want to connect to the phone.

5Enter the Bluetooth passcode of the device to associate (or pair) and connect the

device. (You only need to give this passcode when you connect to the device for the

first time.)

Set up Bluetooth name and visibility

Select Menu > Settings > Connectivity > Bluetooth > Bluetooth settings to define how

your phone appears to other Bluetooth devices. Select from the following options:

My phone's visibility and Shown to all—to show the phone to all other Bluetooth devices.

Hidden—to show the phone only to the paired devices.

My phone's name—to change the Bluetooth device name for your phone.

Settings

Start a Bluetooth connection

Select Menu > Settings > Connectivity > Bluetooth, and select from the following

options:

View active device—to check which Bluetooth connection is currently active. To close the

connection to the selected device, select Disconnect.

View paired devices—to view a list of Bluetooth devices that are currently paired with the

phone. Scroll to the desired device. To delete the pairing to the device, select Delete.

Select Options—to access some of the following functions. (This list may change depending

on the status of the device and the Bluetooth connection.)

Connect—to connect to the selected device.

Assign short name—to give a nickname (visible to you only) to the selected device.

Request conn. authorization—to set up authorization. Select No to allow the phone to

connect automatically. Select Yes if you want the phone to prompt you first.

Infrared

The phone has an IR (infrared) port that you can use for connecting your phone to another

IrDA compliant device. You can send or receive data such as business cards and calendar

notes to or from a compatible phone or data device, such as a computer.

Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR

devices. This device is a Class 1 Laser product.

Send and receive data using IR

• Ensure that the IR ports of the sending and receiving devices are pointing at each other

and that there are no obstructions between the devices.

• To activate the IR port of your phone, select Menu > Settings > Connectivity >

Infrared.

• The user of the sending phone selects the desired IR function to start data transfer.

If the data transfer is not started within two minutes after the activation of the IR port, the

connection is cancelled and has to be started again.

IR connection icon

• When appears continuously, the IR connection has been activated and your

phone is ready to send or receive data using its IR port.

• When blinks, your phone is trying to connect to the other device or a connection

has been lost.

The IR connection deactivates automatically.

EGPRS

GPRS (general packet radio service) is a network service that allows mobile phones to be

used for sending and receiving data over an IP-based network. GPRS is a data bearer that

enables wireless access to data networks, such as the Internet.

EGPRS (enhanced GPRS), also known as EDGE (enhanced data rates for global evolution) is

similar to GPRS but the connection is faster. For more information on availability of EGPRS

and data transfer speed, contact your service provider.

Note: The Nokia 6820 phone is 3GPP GSM Release 99 terminal supporting EGPRS

service. It is also designed to support Release 97 GPRS networks. However, proper

functionality in all Release 97 GPRS networks cannot be guaranteed. For more

information, contact your service provider.

The applications that may use EGPRS are multimedia, IM and text messaging, browsing

sessions, e-mail, remote SyncML, Java application downloading and the PC dial-up (such as

Internet and e-mail).

To use EGPRS technology, you must first do the following:

• Contact your service provider for availability and subscription to the EGPRS service.

• Save the EGPRS settings for each of the applications used over EGPRS.

For information on pricing, contact your service provider.

Note: When you select GPRS as a data bearer, the phone uses EGPRS instead of

GPRS, if this is available in the network. You cannot select between EGPRS and

GPRS but for some applications you may be able to select either GPRS or GSM data

(CSD).

EGPRS CONNECTION

Your phone supports three simultaneous EGPRS connections. You can browse XHTML pages,

receive multimedia messages and maintain a PC dial-up connection, all at the same time.

Select Menu > Settings > Connectivity > GPRS > GPRS connection.

Select Always online to set the phone to automatically register to an EGPRS network when

you switch the phone on. When the GPRS connection is established, the icon appears

on the top left of the display.

When you start an application using EGPRS, the connection between the phone and the

network is established, and data transfer is possible. When you end the application, the

EGPRS connection is ended but the registration with the EGPRS network remains.

If you receive a call or a text message, or make a call during a GPRS connection, the icon

appears on the top right of the display to indicate that the EGPRS connection has been

suspended (on hold).

The GPRS and EGPRS connections are indicated by the same icons.

Settings

If you select When needed, the EGPRS registration and connection are established when

required by an application using GPRS and closed when you end the application.

•EGPRS MODEM SETTINGS

You can connect the phone to a compatible PC using IR, Bluetooth or a data cable

connection and use the phone as a modem to enable EGPRS connectivity from the PC.

Select Menu > Settings > Connectivity > GPRS > GPRS modem settings. Select Active

access point to activate the desired access point. Select Edit active access point to change

the access point settings.

• Select Alias for access point. Key in the name that you would like for the activated

access point and select OK.

• Select GPRS access point. Key in the access point name (APN) to establish a connection

to an EGPRS network. Contact your service provider for the APN.

You can also set the EGPRS dial-up service settings (APN) on your PC using the Nokia

Modem Options software. See “PC Suite” on page 92. If you have set the settings on both

your PC and on your phone, the settings for the PC are used.

•CALL SETTINGS

Select Menu > Settings > More settings > Call settings, and select from the following

options:

Call forwarding (network service)—to direct your incoming calls to an alternate location,

such as your voice mailbox number. Forwarding options that are not supported by your SIM

card or your service provider may not be shown. Contact your service provider for details.

For example, select Call forwarding to forward your voice calls when your number is busy

or when you reject an incoming call.

To turn on call forwarding, select Call forwarding, select a menu option, and choose

Activate. To turn call forwarding off, select Cancel. To check whether call forwarding is

activated or not, select Check status.

To see the call forwarding icons in the standby mode, see “Icons in the standby mode” on

page 19.

Anykey answer > On—to answer an incoming call by briefly pressing any key, except the

Power key, Left selection key, Right selection key, and End key.

Automatic redial > On—to set up your phone to make a maximum of ten attempts to

connect a call after an unsuccessful call attempt.

1-touch dialing > On—to turn on speed dialing.

Call waiting > Activate—to set up the phone to notify you of an incoming call while you

have a call in progress. See “Call waiting” on page 23. This feature requires supporting

network services.

Summary after call > On—to set the phone up to briefly display the duration and cost of

the call when it terminates. This feature requires supporting network services.

Send my caller identity > Yes—to set your phone up to display your phone number to the

person you are calling. Select Set by network and the setting agreed upon with your service

provider is used. This feature requires supporting network services.

Line for outgoing calls—to select the phone line 1 or 2 for making calls. For example, you

can use line 1 for personal calls and line 2 for business calls. For more information on

availability, contact your service provider.

If you select Line 2 and have not subscribed to this network service, you will not be able to

make calls. However, calls on both lines can be answered regardless of the selected line.

If supported by your SIM card, you can prevent the line selection by selecting the Lock

option. Note: In the standby mode, you can switch from one line to the other by pressing

and holding the * key.

•PHONE SETTINGS

Select Menu > Settings > More settings > Phone settings, and select from the following

options:

Phone language—to set the language for the display text. If Automatic is selected, the

phone selects the language according to the information on the SIM card.

Memory status—to view the amount of free, used, and total amount of memory for each

function. You may also find memory information in the menus of some functions, for

example in the Applications menu.

Security keyguard—to lock the keypad of the phone with a security code. For more

information, see “Security code” on page 65.

• Key in the security code and select OK.

• To set the security keyguard, select On. The keypad lock remains active if you open the

keyboard.

• To activate the security keyguard, select Menu and the * key within 1.5 seconds (when

the keyboard is closed). To deactivate the keyguard when the keyboard is open, select

Unlock > OK; then key in the security code. If the keyboard is closed, select Unlock and

press the * key within 1.5 seconds. Then key in the security code.

• When the keypad is locked, appears on top of the display. If you have activated

the security keyguard, it does not protect your phone data from PC Suite access.

Settings

Cell info display > On—to set the phone to indicate when it is used in a cellular network

that is based on micro cellular network (MCN) technology.

Welcome note—to customize the welcome note. Key in the note that you would like to be

shown briefly when the phone is switched on and select Save.

Operator selection > Automatic—to set up the phone to automatically select one of the

cellular networks available in your area.

If you select Manual, you can select a network that has a roaming agreement with your

service provider. If No network access is displayed, you must select another network. The

phone stays in manual mode until the automatic mode is selected or another SIM card is

inserted into the phone.

Confirm SIM service actions—to receive confirmation messages when SIM services are

being used. For more information, see “SIM services” on page 91.

Help text activation—to set the phone to show the help topics.

Start-up tone—to set the phone to play a start-up tone when it is switched on.

•ENHANCEMENT SETTINGS

The enhancement settings menu is only shown if the phone is or has been connected to

some mobile enhancements (accessories), such as a charger or hands-free unit.

Select Menu > Settings > More Settings > Enhancement settings. Then select an

appropriate enhancement from a list, if the corresponding enhancement is or has been

connected to the phone. You can select the following options:

Default profile—to automatically activate the desired profile when you connect to the

selected enhancement. You can select another profile while the enhancement is connected.

Automatic answer—to set the phone to automatically answer an incoming call after five

seconds. If the Incoming call alert is set to Beep once or Off, automatic answer will not be

used.

Lights—to set the lights permanently to On. Select Automatic to set the lights on for 15

seconds after a keypress. The Lights option is available only when Handsfree is selected.

When the phone is connected to the full car kit, select Ignition detector and On to

automatically switch off the phone approximately 20 seconds after you have switched off

the ignition.

For the Loopset, select Use Loopset.

For Text phone, select Use text phone and select Yes to use the text phone settings instead

of headset or loopset settings.

•SECURITY SETTINGS

To work with security settings, select Menu > Settings > More settings > Security

settings, and select the setting you would like to modify.

Note: When security features that restrict calls are in use (call restricting, closed

user group, and fixed dialing), calls may be possible to certain emergency numbers

in some networks.

PIN code request

Select PIN code request to set the phone to ask for your PIN code every time the phone is

switched on. Some SIM cards do not allow the PIN code request to be turned off.

Call restricting

Select Call restrictions to restrict incoming calls to, and outgoing calls from, your phone.

Network service and a password are required.

Fixed dialing

Select Fixed dialing to restrict your outgoing calls and text messages to selected phone

numbers if this function is supported by your SIM card. The PIN2 code is required.

When the fixed dialing is on, GPRS connections are not possible except while sending text

messages over a GPRS connection. In this case, the recipient’s phone number and the

message center number must be included in the fixed dialing list.

Closed user group

Closed user group is a network service that specifies the group of people whom you can

call and who can call you. For more information, contact your service provider.

Security level

Security level instructs the phone to ask for the security code whenever a new SIM card is

inserted into the phone.

Memory

Select Memory to set the phone to request the security code when the SIM card memory is

selected.

Access codes

Select Access codes to change the security code, PIN code, PIN2 code or restriction

password. Codes can only include numbers from 0 to 9. Refer to the following items when

changing access codes.

Settings

SECURITY CODE

The security code is 5 to 10 digits and protects your phone against unauthorized use. The

preset code is 12345. When you have changed the code, keep the new code secret and in a

safe place separate from your phone. To change the code, and to set the phone to request

it, see “Security settings” on page 64.

If you key in an incorrect security code five times in succession, the phone may display Code

error. Wait for five minutes and key in the code again.

PIN AND PIN2 CODES

The PIN (personal identification number) code is 4 to 8 digits and protects your SIM card

against unauthorized use. The PIN code is usually supplied with the SIM card. To set the

phone to request the PIN code each time the phone is switched on, see “Security settings”

on page 64.

The PIN2 code may be supplied with the SIM card and is required to access some functions.

MODULE PIN

The module PIN code is 4 to 8 digits and is required to access the information in the security

module. See “Security module” on page 89. The module PIN is supplied with the SIM card if

the SIM card has a security module in it.

SIGNING PIN

The signing PIN is 4 to 8 digits and is required for the digital signature. See “Digital

signature” on page 90. The signing PIN is supplied with the SIM card if the SIM card has a

security module in it.

PUK AND PUK2 CODES (8 DIGITS)

The PUK (personal unblocking key) code is required to change a blocked PIN code. The PUK2

code is required to change a blocked PIN2 code.

If the codes are not supplied with the SIM card, contact your service provider.

If you key in an incorrect PIN code three times in succession, the phone may display PIN

blocked or PIN code blocked and ask you to key in the PUK code.

RESTRICTION PASSWORD (4 DIGITS)

The restriction password is required when using the Call restriction service. You can obtain

the password from your service provider.

WALLET CODE (4 TO 10 DIGITS)

The wallet code is required to access the wallet services. If you key in an incorrect wallet

code several times, the wallet application is blocked for five minutes. For further

information, see “Wallet” on page 74.

•RESTORE FACTORY SETTINGS

To reset the menu settings to their original values, select Menu > Settings > More

settings > Restore factory settings. Key in the security code and select OK.

Note: The data you have keyed in or downloaded, for example the names and

phone numbers saved in contacts, are not deleted.

Gallery

11 Gallery

In the Gallery menu you can manage images, photos, recordings, tones

and video clips.

Your phone supports usage rights system to protect acquired content. A piece of content,

for example ringing tone, can be protected and associated with certain usage rules, for

example number of usage times and a certain usage period. The rules are defined in the

usage rights for the content which can be delivered either together with the content or

independently depending on the service provider. You may be able to update these rights.

Always check the delivery terms of any content and usage rights before acquiring them, as

they may be subject to a fee.

The Gallery uses shared memory. For more information, see “Shared Memory” on page 6.

1Select Menu > Gallery.

A list of folders is shown. Graphics, Images, Video clips, Recordings and Tones, are the

original folders on the phone. You cannot delete, rename or move the original folders

on the phone.

2Scroll to the desired folder and select Open to view a list of files in the folder. You can

select Options to access Add folder, Delete folder, Move, Rename folder, Details, Type

of view, Sort and Gallery downloads. Other available options include the following:

Type of view—to select how the folders are displayed.

Gallery downloads—to download more images and tones. Select Image downloads or

Tone downloads. The list of available browser bookmarks is shown. Select More

bookmarks to access the list of bookmarks in the Services menu.

Select the appropriate bookmark to connect to the desired site. If the connection fails,

you may not be able to access the page from the service whose connection settings are

currently active. In this case, enter the Services menu and activate another set of

service settings. Try again to connect to the site.

For availability of different services, pricing and tariffs, contact your service provider.

Download content only from the sources you trust.

3If you opened a folder in step 2, select the file you want to view and select Open.

Or, select Options to access Delete, Send, Move, Rename Set as wallpaper, Set as ring

tone, Edit image, Details, Type of view, Sort, Delete all, View in sequence, Play, Zoom,

Mute audio (Unmute audio), Set contrast. Choose from the following options:

Send—to send the selected file using MMS, a Bluetooth connection, or an IR

connection.

Delete all—to delete all the files in the selected folder.

Edit image—to insert text, a frame or clip-art into the selected picture.

View in sequence—to view the files in the folder one by one.

Play—to listen to or to view a sound or image file that is contained in the message.

Zoom—to increase the size of the image that is contained in the message.

Mute audio (Unmute audio)—to mute (unmute) the sound file.

Set contrast—to adjust the contrast level of the image.

Update rights—to update the usage rights of the selected file. The option is only shown

if the rights update is supported by the file.

being copied, modified, transferred or forwarded.

Camera

12 Camera

You can take photos and record video clips with the built-in camera. The

camera lens is on the back of the phone, and the display of the phone

works as a viewfinder. The camera produces pictures in JPEG format and the video clips in

H.263 (SubQCIF) format. You cannot use the camera, if the keyboard is open.

The camera includes a self-timer if you want to be included in the photo. The timer allows

you 10 seconds before the camera takes the photo.

If there is not enough memory to take a new photo or record a video clip, you need to free

some by deleting old photos or other files from Gallery. The camera uses shared memory.

For more information, see “Shared Memory” on page 6.

Note: Obey all local laws governing the taking of pictures.

•CAMERA SETTINGS

Use this procedure to choose your camera settings.

Select Menu > Camera > Settings. Choose settings for the following:

Image quality—to define how much the photo file will be compressed when saving the

image. Select High, Normal or Basic. The High setting provides the best image quality but

takes more memory.

Video clip length—to select the length for video clips recorded with the camera. Select

Default if you intend to send the file as a multimedia message.

Camera sounds—to set the shutter sound and the self-timer tone to On or Off.

Default title—to define the prefix the camera should use to name the photo files.

If you select Automatic, the camera uses the prefix Image with an incremental number

(such as Image001, Image 002).

If you select My title, you can key in a prefix for a series of photos and the camera

numbers the photo files for you. For example (PoolParty001, PoolParty002).

•TAKE A PHOTO

1Select Menu > Camera and choose from the following:

• Standard photo—to take a basic photo using landscape orientation.

• Portrait photo—to take a photo using portrait orientation.

•Night mode—to take a photo when the lightning is dim.

Note: To quickly access the camera in the standby mode (with standard photo

view), move the joystick up.

The image appears on the display, and you can use the display as a viewfinder.

2Select Capture.

The phone saves the photo in the Photos folder of the Gallery menu. The saved photo

appears on the display.

3Select Back to take another photo, or select Options and select from the following:

• Zoom—to enlarge the view. Use the joystick to reposition the picture in the

viewfinder window.

•Send—to send the photo using MMS, IR or Bluetooth technology.

•Rename—to change the name of the photo.

•Open Gallery—to view the folders in the Gallery menu.

•Set contrast—to adjust the contrast for the photo.

•Set as wallpaper—to save the photo as background wallpaper on your phone.

•Details—to see the name, size, resolution, date created, format, and copyright

information.

4To use the viewfinder options, select Options and select from the following:

• View Previous—to view the previous photo.

•Open Gallery—to view the folders in the Gallery menu.

•Change mode—to change the type of photo or video.

• Self-timer—to take a photo using a delay.

To use the self-timer, select Start and, after the timeout period (approximately 10

seconds) the camera takes the photo and saves it in the Gallery menu. While the

self-timer is running, a beeping sound is heard.

•RECORD A VIDEO CLIP

Select Menu > Camera > Video > Record. The recording icon and the remaining

recording time are shown at the top of the display.

To stop the recording, select Stop and the video clip is saved in the Video clips folder of the

Gallery menu.

To pause the recording, select Pause. To resume the recording, select Continue.

Select Options to select, for example, an option to set the desired operation mode, mute or

unmute the microphone, or access the Gallery.

Organizer

13 Organizer

•ALARM CLOCK

The alarm clock uses the time format that has been set for the clock. The alarm clock works

even when the phone is switched off.

Select Menu > Organizer > Alarm clock.

• Select Alarm time, key in the alarm time and select OK.

To change the alarm time, select On.

• Select Alarm tone, and you can select a default alarm tone, personalize your alarm

tone by selecting one from the ringing tone list or from the Gallery.

When the alarm time expires, the phone sounds an alert tone, and flashes Alarm! along with

the current time on the display. Select Stop to stop the alarm. If you let the alarm continue

for a minute or if you select Snooze, the alarm stops for about ten minutes and then

resumes.

If the alarm time is reached while the phone is switched off, the phone switches itself on

and starts sounding the alarm tone. If you select Stop, the phone prompts you to activate

the phone for calls by displaying Switch the phone on?. Select No to switch off the phone

or Yes to make and receive calls.

Note: Do not select Yes when wireless phone use is prohibited or when it may

cause interference or danger.

•CALENDAR

The calendar helps you to keep track of reminders, calls that you need to make, meetings,

and birthdays.

The calendar uses shared memory. For more information, see “Shared Memory” on page 6.

1Select Menu > Organizer > Calendar.

Note: To quickly view the current Calendar month, move the joystick to the

right in the standby mode.

2Scroll to the day that you want and select View.

The current day is indicated by a frame around the day. If there are any notes set for

the day, the day is shown in bold type.

3To view a single note, scroll to the desired note, and select View.

You can scroll to view the entire note.

4To perform other tasks, select Options and choose from the following:

Make a note—to create a note.

Delete, Edit, or Move options—to erase, change, or move a note.

Go to date—to go directly to a new date.

Send note—to send the note to a compatible phone calendar using IR, calendar, text

message, MMS, or Bluetooth technology.

Copy—to copy the note to another day.

Settings—to set the date, time, date or time format, or the first day of the week. In the

Auto-delete option you can set the phone to automatically delete old notes after a

specified time. However, the repeated notes, for example birthday notes, will not be

deleted.

Go to to-do list—to take a shortcut to the to-do list.

Add a calendar note

For information on keying in letters and numbers, see “Tips for writing text” on page 27.

About the Alarm Feature

When you add a calendar note, you have the option to use an alarm. If you set the alarm,

the phone will beeps and display the note at the alarm time. When a call note icon is

shown on the display, you can call the displayed number by pressing the Talk key. To stop

the alarm and view the note, select View. Select Snooze to phone returns to the standby

mode. To stop the alarm without viewing the note, select Exit.

Select Menu > Organizer > Calendar or move the joystick to the right in the standby mode

to go to the monthly view. Scroll to the date that you want, and select View. Select Add

Note if there are no notes for the day, or select Options > Make a note and select from the

following:

Calendar—Key in the note and select Save (or select Options and search for the name

in contacts and select OK). Key in the location of the meeting, select Save. Key in the start

time for the meeting and select OK, and then key in the end time and select OK. To set the

alarm for the note, select With tone or Silent (no alarm tone) and then set the alarm time.

Call—Key in the phone number, and select Save. Key in the name, select Save. (Instead

of keying in the phone number, search for the name and number in contacts). Key in the

time for the call and select OK. To set the alarm for the note, select With tone or Silent (no

alarm tone) and then set the alarm time.

Birthday—Key in the name (or select Options and search for it in contacts) and select

Save. Then key in the year of birth and select OK. To set the alarm for the note, select With

tone or Silent (no alarm tone) and then set the alarm time.

Note—Key in the note, and select Save. Key in the end day for the note and select OK.

To set the alarm for the note, select With tone or Silent (no alarm tone) and set the alarm

time.

Organizer

Reminder—Key in the subject for the reminder, and select Save. To set the alarm for the

note, select Alarm on and set the alarm time.

When you have set the alarm, the icon is displayed when you view the notes.

•TO-DO LIST

In the to-do list, you can save notes for tasks that you have to do and manage the tasks in

different ways.

The to-do list uses shared memory. For more information, see “Shared Memory” on page 6.

Select Menu > Organizer > To-do list.

• To add a new note when the task list is empty, select Add note, or select Options and

select Add if you have saved tasks. Select Save and select the priority for the note High,

Medium, or Low. The phone automatically sets the deadline without an alarm for the

note. To change the deadline, view the note and select the option for deadline.

• In the task list, you can select Options, and select an option for, example to sort the

tasks by priority or by deadline, send them to another phone, save them as a calendar

note, or access the calendar.

• To view a task, scroll to the desired task on the list and select View. To edit the displayed

task, select Edit.

•NOTES

You can use Notes for writing and sending notes using IR, SMS, or MMS. Notes uses shared

memory. For more information, see “Shared Memory” on page 6.

1Select Menu > Organizer > Notes, or type a character when the messaging keyboard

is open.

The phone will ask you to set the date and time, if they have not already been set when

you start to write a note.

2To add a new note, select Add note (if the list of notes is empty) or select Options >

Make a note.

3To view a note, scroll to the desired note on the list and select View.

4To edit the displayed note, select Edit.

5Key in the note and select Save.

If you select Options, you can select Insert time & date to add the current time and

date to the note. If there is not enough space for time and date, the phone will ask you

to delete the appropriate number of characters from your note.

You can also send the note using IR, Bluetooth connection, MMS, or as a text message

(SMS) to another compatible phone. If the note is too long to be sent as a text message,

the phone prompts you to delete the appropriate number of characters from your note.

•WALLET

You can use the wallet to pay for your purchases made from the browser. You can save your

personal information, such as credit card numbers and addresses in the wallet, and then use

the data that are saved in the wallet during browsing. You can also save access codes to

mobile services that request a user name and password.

The data in the wallet is protected with a wallet code that you can define when you access

the wallet for the first time. At Create wallet code, key in the code and select OK to confirm

it and at Verify wallet code, key in the code again and select OK.

To delete all the contents of the wallet and the wallet code, key in *#7370925538# (*#res

wallet# in letters) in the standby mode. You also need the security code for the phone. See

“Access codes” on page 64.

Access the wallet

Select Menu > Organizer > Wallet. Key in your wallet code, select OK. You then can choose

from the following options:

Wallet profiles—to create card combinations, for example, for different services. A wallet

profile is helpful if the service asks you to fill in many data items. You can select the

appropriate wallet profile instead of selecting different cards separately.

Cards—to save personal card information. You can save payment card, loyalty card and

access card information, including information such as user name and password

combinations for different services.

Tickets—to save notifications of e-tickets that you have bought using your mobile service.

To view the tickets, scroll to the desired ticket and select View.

Receipts—to save receipts for mobile purchases.

Personal notes—to save all kinds of personal information that you want to protect by the

wallet PIN code.

Settings—to manage your wallet settings. For more information, see “Wallet settings” on

page 76.

Save card details

1Select Menu > Organizer > Wallet > Cards.

2Select one of the following card types to save the details:

Payment card—for credit and debit cards.

Loyalty card—for membership cards.

Access card—for personal user names and passwords to online services.

Organizer

Address card—for basic contact information for home or office.

User info card—for customized personal preferences for online services.

3If there are no cards in the folder, select Add to create a new card.

4To view saved details of the card, scroll to the desired card and select View.

5Fill in the fields for the details and select Done.

You can also receive card information to your phone over the air from a card issuer or service

provider. You will be notified as to which category the card belongs to. Save or discard the

received card. You can view, but not edit the saved card. For availability of receiving card

information over the air, contact the card issuer or service provider.

Add personal notes

You can save personal notes, for example, account numbers, passwords, codes, or notations.

Access the wallet and select Personal notes. To create a new personal note, select Add new.

To view a note, scroll to the desired note on the list and select View. To edit the displayed

note, select Edit.

When viewing a note, you can select the following options Send via text msg, Copy to

calendar, or Use detail.

Create a wallet profile

When you have saved your personal card details, you can combine them together to create

a wallet profile. You can use the wallet profile to retrieve wallet data from different cards

while browsing.

1Select Menu > Organizer > Wallet > Wallet profiles.

2To create a new wallet profile, select Add new.

3Fill in the following fields and select Done.

Some of the fields contain data that are selected from the wallet. You must save the

data before you can create a wallet profile.

Wallet profile name—enter a name for the profile.

Select payment card next—select a card from the payment card list.

Select loyalty card next—select a card from the loyalty card list.

Select access card next—select a card from the access card list.

Select user info card next—select a card from the user data card list.

Select billing address next—select an address from the address card list.

Select shipping address next—select an address from the address card list.

Select receipt delivery address next—select an address from the address card list.

Select receipt delivery method next—select the way to deliver the receipt; Receipt to

phone number or Receipt to e-mail address.

Wallet settings

1Select Menu > Organizer > Wallet > Settings

2Select Change code to change the wallet code.

3Select Phone ID to set the RFID code.

Guidelines for wallet purchases

To do your shopping, access the desired service site that supports the wallet. The service

needs to support the Electronic Commerce Modeling Language specification. See “Connect

to a service” on page 85.

Choose the product that you want to buy and read carefully all provided information before

your purchase.

Note: The text may not fit within a single screen. Therefore, make sure that you

scroll through and read all of the text before your purchase.

• To pay for the items, the phone asks whether you want to use the wallet or not. The

phone also asks for your wallet PIN code.

• Select the card you want to pay with from the Payment cards list. Provided that the

data form you receive from the service provider supports the Electronic Commerce

Modeling Language specification, the phone automatically fills in the credit card

information or the wallet profile from the wallet.

• When you approve the purchase, and the information is forwarded.

• You may receive an acknowledgement or a digital receipt of the purchase.

• To close the wallet, select Close wallet. If you do not use the wallet for 5 minutes, it

will be automatically closed.

Note: If you have tried to access or have accessed confidential information

requiring passwords (for example, your bank account), empty the cache of your

phone after each use.

•SYNCHRONIZATION

Synchronization allows you to save your calendar and contacts data on a remote Internet

server or on a compatible PC. If you have saved data on the remote Internet server, you can

synchronize your phone by starting the synchronization from the phone. Synchronizing to

the remote server is a network service. You can also synchronize your contact and calendar

data to correspond with the data on your compatible PC by starting the synchronization

from your PC. The contact data in your SIM card will not be synchronized.

Note: Answering an incoming call during synchronization will end the

synchronization process and you will need to restart it.

Organizer

Synchronize from your phone

Before synchronizing from your phone, you may need to do the following:

• Subscribe to a synchronization service. For more information on availability and the

synchronization service settings, contact your service provider.

• Retrieve the synchronization settings from your service provider.

• Set the connection settings you need for synchronization. See “Phone setup” on

page 84.

To start the synchronization from your phone, use the following steps:

1Activate the connection settings that you need for synchronization. See “Phone setup”

on page 84.

2Select Menu > Organizer > Synchronization > Settings > Active Internet sync.

settings.

3Scroll to the set you wish to activate and select Activate.

4Mark the data to be synchronized.

5Select Menu > Organizer > Synchronization > Synchronize.

The marked data in the active set will be synchronized after confirmation.

Note: Synchronizing for the first time or after an interrupted synchronization may

take up to 30 minutes to complete, if contacts or calendar are full.

Obtain synchronization settings

You may receive the synchronization settings as an OTA message from your service provider.

To receive the settings over the air, see “Over-the-air settings service” on page 21.

To key in the settings manually, use the following steps:

1Select Menu > Organizer > Synchronization > Settings > Active Internet sync.

settings.

2Scroll to the set you wish to activate, and select Activate.

You must activate the set where you want to save the synchronization settings. A set

is a collection of settings required to make a connection to a service.

3Select Edit active Internet sync. settings. Select each setting one by one and key in all

the required settings.

• Settings' name—to key in the name for the set.

• Data to be synchronized—to mark the data you want to synchronize. Select

Contacts and/or Calendar, and select Done.

• Database addresses—to select Contacts database and/or Calendar database.

•User name—to key in the user name.

•Password—to key in the password.

• Synchronization server—to key in the name of the server.

• Connection settings—to define connection settings required for synchronization.

Select each of the settings one by one and key in all the required settings. Contact

your service provider for the settings.

4Select PC sync. settings to key in the settings for server alerted synchronization.

5Select and key in User name and Password.

Synchronize from your PC

To synchronize contacts and the calendar from your PC, use an IR or Bluetooth connection,

or a data cable. You also need the PC Suite software of your phone installed on your PC.

Start the synchronization from your PC using PC suite.

Applications

14 Applications

•GAMES

The games use shared memory. For more information, see “Shared Memory” on page 6.

About photosensitive seizures

A very small percentage of people may experience a seizure when exposed to certain visual

images, including flashing lights or patterns that may appear in video games. Even people

who have no history of seizures or epilepsy may have an undiagnosed condition that can

cause photosensitive epileptic seizures while watching video games. These seizures may

have a variety of symptoms, including lightheadedness, altered vision, eye or face twitching,

jerking or shaking of arms or legs, disorientation, confusion, or momentary loss of

awareness. Seizures may also cause loss of consciousness or convulsions that can lead to

injury from falling down or striking nearby objects.

Immediately stop playing and consult a doctor if you experience any of these symptoms.

Adults who allow teenagers (or children) to play the games should watch for or ask their

children about these symptoms as they are more likely than adults to experience these

seizures. The risk of photosensitive epileptic seizures may be reduced by playing in a well-lit

room and by not playing when you are drowsy or fatigued. If you or any of your relatives

have a history of seizures or epilepsy, consult a doctor before playing.

Play safely. Take a break from playing games at least every half hour. Stop playing

immediately if you begin to feel tired of if you experience an unpleasant sensation or pain

in your hands or arms. If the condition persists, consult a doctor.

How to play games

Select Menu > Applications > Games and select from the following options:

Select game—to launch a game. Scroll to a game or a game set (the name depends on the

game) and select Open. For functions that you can access by selecting Options in the game

list, see “Other options for an application or application set” on page 80.

Game downloads—to download a game to the phone.

Memory—to view the amount of memory that is available for game and application

installations.

Settings—to set sounds, lights and shakes for the game.

Note: Running some games may consume the battery faster (and you may need

to connect the phone to the charger).

•COLLECTION

Collection menu allows you to manage and use applications downloaded to the phone.

Collection uses shared memory. For more information, see “Shared Memory” on page 6.

Select Menu > Applications > Collection and select from the following options:

Select application—to launch an application. Scroll to an application or application set (the

name depends on the application) and select Open. For functions that you can access by

selecting Options in the applications list, see “Other options for an application or

application set” on page 80.

App. downloads—to download an application to the phone.

Memory—to view the amount of memory that is available for game and application

installations.

Note: Running some applications may consume the battery faster and you may

need to connect the phone to the charger.

Other options for an application or application set

Delete—to delete the application or application set from your phone.

If you delete a pre-installed application or an application set from your phone, you may

download it again to your phone from the Nokia Software Market,

www.softwaremarket.nokia.com.

Web access—to restrict the application from accessing the network. Select Ask first and the

phone will ask you for net access, Allowed to allow the net access, or Not allowed not to

allow the net access.

Update version—to check if a new version of the application is available for download from

the services (network service).

Web page—to provide further information or additional data for the application from an

Internet page. This is a network service and the menu is shown only if an Internet address

has been provided with the application.

Details—to give additional information about the application.

Download a game or an application

Your phone supports J2METM Java games and applications. Make sure that the application

or a game is compatible with your phone before downloading it. You can download new

Java applications in different ways:

• Select Menu > Applications > Applications > App. downloads or select Menu >

Applications > Games > Game downloads.

The list of available browser bookmarks appears. Select More bookmarks to access the

list of bookmarks in the Services menu.

Applications

Select the appropriate bookmark to connect to the desired site. If the connection fails,

you may not be able to access the page from the service whose connection settings are

currently active. In this case, enter the Services menu and activate another set of

service settings. (See “Connect to a service” on page 85.) Try again to connect to the

site.

For the availability of different services, pricing and tariffs, contact your service

provider.

• Select Menu > Services > Download links to download an appropriate application or

game.

• Use the Nokia Application installer from PC Suite to download the applications to your

phone.

When downloading a game or an application, you have the option to save it to the Games

menu instead of the Applications menu.

Note: Nokia does not warrant applications from other sites. If you choose to

download Java applications from them, you should take the same precautions, for

security or content, as you would with any site.

•EXTRAS

Voice recorder

The voice recorder allows you to record sounds and speech. You might find this useful for

recording information you intend to write down later, such as a name and a phone number.

The recorder cannot be used when a data call or connection is active.

Note: Obey all local laws governing recording of calls.

MAKE A RECORDING

1Select Menu > Applications > Extras > Voice recorder.

2To start the recording, select Record. To start the recording during a call, select

Options > Record. While recording a call, all parties to the call will hear a faint beeping

sound.

When recording, hold the phone in the normal position near to your ear.

3To end the recording, select Stop.

The recording is saved in the Recordings folder of the Gallery menu.

4To listen to the last recording, select Replay last. To send the recording as a multimedia

message, select Send.

LIST OF RECORDINGS

Select Menu > Applications > Extras > Voice recorder > Recordings list. The list of

folders in the Gallery appears. Scroll to Recordings, select Open and you can select some of

the options for files in the Gallery.

Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the square and

the square root, and converts currency values.

1Select Menu > Applications > Extras > Calculator.

2When “0” appears on the screen, key in the first number of the calculation, press the

# key for a decimal point or the corresponding symbol on the keyboard, if the keyboard

is open.

3Select Options > Add, Subtract, Multiply, Divide, Square, Square root or Change sign.

If the keyboard is open, you can also use the corresponding calculation symbols of the

keyboard, if available.

Note: If you are using the calculator with the keyboard closed, press the * key

once to add, twice to subtract, three times to multiply, or four times to divide.

4Key in the second number.

5For the total, select Equals.

6To start a new calculation, press and hold Clear.

Note: This calculator has a limited accuracy and is designed for simple

calculations.

Currency conversion

1Select Menu > Applications > Extras > Calculator.

2To save the exchange rate, select Options > Exchange rate.

3Select either of the displayed options.

4Key in the exchange rate, press the # key for a decimal point, and select OK.

The exchange rate remains in the memory until you replace it with another one.

5To perform the currency conversion, key in the amount to be converted, select

Options > In domestic or In foreign.

You can also perform the currency conversion in the standby mode. Key in the amount to

be converted, select Options > In domestic or In foreign.

Note: When you change base currency, you must key in the new rates because all

previously set exchange rates are set to zero.

Applications

Countdown timer

Select Menu > Applications > Extras > Countdown timer. Key in the time in hours and

minutes and select OK. If you wish, write a note that will be displayed when the time

expires, and select OK to start the countdown timer.

To change the countdown time, select Change time, or to stop the timer, select Stop timer.

If the alarm time is reached when the phone is in the standby mode, the phone sounds a

tone and shows the note, if available or Countdown time up. Stop the alarm by pressing

any key. If no key is pressed, the alarm stops automatically within 30 seconds. To stop the

alarm and to delete the note, select OK.

Stopwatch

You can measure time and take split or lap times using the stopwatch. During timing, the

other functions of the phone can be used. To set the stopwatch to run in the background,

press the End key.

Note: Using the stopwatch or allowing it to run in the background when using

other features increases the demand on battery power and reduces the battery life.

TAKE SPLIT TIMES OR LAP TIMES

1Select Menu > Applications > Extras > Stopwatch > Split timing or Lap timing >

Start.

You can select Continue if you have set the stopwatch to run in the background.

2Select Split to take a split time, Lap to take a lap time, or Stop to stop the timing. You

can scroll through the split or lap times shown below the overall time.

3Select Save to save the lap or split times as a set of times.

4To reset the times or to continue timing, select Options > Reset or Start.

VIEW AND DELETE TIMES

Select Menu > Applications > Extras > Stopwatch.

If the stopwatch has not been reset, select Show last to view the most recent measured

time. Select View times and a list of names or the final times of the time sets is shown.

Select the time set that you want to view.

To delete the saved times, select Delete times. Select Delete all > OK, or select One by one,

scroll to the times that you want to delete, and select Delete > OK.

15 Services

You can access various services with the multimode browser, such as

weather reports, news, flight times, financial information and

entertainment.

Check the availability of these services, pricing, and tariffs with the service provider you

plan to use. Service providers will also give you instructions on how to use their services.

With the multimode browser you can view the services that use wireless mark-up language

(WML) or extensible hypertext markup language (XHTML). Since the phone display area and

the memory capacity are much smaller than in a computer, Internet content is displayed

differently on the phone. You may not be able to view all details of the Internet pages.

The main steps for using services are listed below:

1Save the service settings that are required to access the service that you want to use.

2Make a connection to the selected service.

3Start browsing the pages of the service.

4When finished browsing, end the connection to the service.

•PHONE SETUP

You may receive the service settings as an over-the-air message from your service provider

that offers the service that you want to use.´ You can also key in the settings manually or

add and edit the settings using PC Suite.

For more information and for the appropriate settings, contact the service provider that

offers the service that you want to use.

To receive the service settings over the air, see “Over-the-air settings service” on page 21.

Key in the service settings

1Select Menu > Services > Settings > Connection settings > Active service settings.

2Scroll to the connection set that you would like to activate and select Activate.

You need to activate the connection set where you want to save the service settings.

A connection set is a collection of settings that are required to connect to a service.

3Select Edit active service settings.

4Select each of the settings one by one and key in all the required settings according to

the information you have received from your service provider. Bearer-related settings

are in the Bearer settings menu.

Services

Connect to a service

Make sure that the service settings of the service that you want to use have been activated.

To activate the settings:

1Select Menu > Services > Settings > Connection settings > Active service settings.

2Scroll to the set you want to activate and select Activate.

3Connect to the service using one of the three following methods:

•Open the start page of the service, such as the home page of the service provider.

To use this method, select Menu > Services > Home, or in the standby mode, press

and hold the 0 key. If the keyboard is open, press the corresponding number key.

•Select the bookmark of the service. To use this method, select Menu > Services >

Bookmarks, and select a bookmark. If the bookmark does not work with the

current active service settings, activate another set of service settings and try

again.

•Key in the address of the service. To use this method, select Menu > Services >

Go to address. Key in the address of the service, and select OK. It is not necessary

to add the prefix http:// in front of the address.

•BROWSE THE PAGES OF A SERVICE

After you have made a connection to the service, you can start browsing its pages. The

function of the phone keys may vary in different services. Follow the text guides on the

phone display. For more information, contact your service provider.

If EGPRS is selected as the data bearer, the icon appears on the top left of the display

during browsing. If you receive a call or a text message, or make a call during an EGPRS

connection, the icon appears on the top right of the display to indicate that the EGPRS

connection has been suspended (on hold). After the call the phone tries to reconnect the

EGPRS connection.

•USE THE PHONE KEYS WHILE BROWSING

• Move the joystick up or down to browse through the page.

• To select a highlighted item, press the joystick briefly or press the Send key.

• To enter letters and numbers, press the keys 0–9. To enter special characters, press the

* key. When the keyboard is open, you can key in letters and numbers normally.

•OPTIONS WHILE BROWSING

Select Options to view a list of options. The service provider may also offer other options.

Choose from the following selections:

Home—to return to the home page.

Bookmarks—to view the list of bookmarks. (See “Bookmarks” on page 87.)

Download links—to show the list of bookmarks for downloading.

Add bookmark—to save the page as a bookmark.

Shortcuts—to open a new list of options that are, for example, specific to the page.

Other options—to show a list of other options, such as Wallet and some security options.

Reload—to reload and update the current page.

Quit—to disconnect. (See “Disconnect from a service” on page 86.)

Note: If you access confidential information requiring passwords, such as your

bank account, empty the cache of your phone after each use. (See “Cache memory”

on page 88.)

Direct calling

The multimode browser supports functions that you can access while browsing. You can

make a voice call, send DTMF tones while a voice call is in progress, and save a name and a

phone number from a page.

Disconnect from a service

To quit browsing and to end the connection, select Options > Quit. When Quit browsing?

is shown, select Yes.

Alternatively, press the End key twice. The phone ends the connection to the service.

Appearance settings of the multimode browser

While browsing, select Options > Other options > Appear. settings, or in the standby

mode, select Menu > Services, Settings > Appearance settings. Select from the following

settings:

Text wrapping > On—to make the text continue on the next line or select Off, if you want

it to be abbreviated when it is too long to be shown on one line.

Show images > No—to turn off the pictures while browsing. This can speed up the browsing

of pages that contain a lot of pictures.

Font size—to choose a font size. Select Small, Normal or Large.

Services

Alerts > Alert for unsecure connection > Yes—to set the phone to alert when a secure

connection changes to an unsecure one during browsing. Select Alert for unsecure items

and Yes to set the phone to alert when a secure page contains an unsecure item.

Encoding and select an option in Content encoding—to change the encoding for the Web

page content. The default value is Western. Select UTF-8 URLs > On, if you want the phone

to send a URL as a UTF-8 encoding.

A cookie is data that a site saves in the browser cache memory of your phone. The data can

be, for example, your user information or your browsing preferences. Cookies are saved until

you clear the cache memory. See “Cache memory” on page 88.

1While browsing, select Options > Other options > Security > Cookies, or in the

standby mode, select Menu > Services > Settings > Security settings > Cookies.

2Select Allow or Reject to allow or prevent the phone receiving cookies.

•BOOKMARKS

You can save addresses as bookmarks in the phone memory.

1While browsing, select Options > Bookmarks, or in the standby mode, select Menu >

Services > Bookmarks.

2Select the desired bookmark or press the joystick briefly to make a connection to the

page associated with the bookmark.

3To manage bookmarks, select Options > View, Edit, Delete, Send, or New bookmark.

Your phone may be set up with some bookmarks for sites that are not affiliated with Nokia.

Nokia does not guarantee or endorse these sites. If you choose to access them, you should

take the same precautions for security and content as you would with any Internet site.

When you receive a bookmark as an OTA message, select Save to add it to the bookmark list,

or select Options > View or Discard.

•DOWNLOADS

1To download more tones, images, games or applications to your phone, select Menu >

Services > Download links.

2Select Tone downloads, Image downloads, Game downloads or App. downloads to

download tones, images, games or applications, respectively.

Download content only from sources you trust.

•SERVICE INBOX

The phone is able to receive service messages (pushed messages) from your service provider.

To set the phone to receive service messages, select Menu > Services > Settings > Service

inbox settings > Service messages > On.

• To view a received service message, select View. If you select Exit, the message is

moved to the Service inbox. To view the service message later, select Menu >

Services > Service inbox.

• While browsing, select Options > Other options > Service inbox. Scroll to the

message that you want, and select Retrieve to download the marked content from the

Web page, or select Options > Details or Delete.

•CACHE MEMORY

The information or services you have accessed are stored in the cache of your phone. A

cache is a buffer memory, which is used to store data temporarily.

To empty the cache while browsing, select Options > Other options > Clear the cache.

To empty the cache in the standby mode, select Menu > Services > Clear the cache.

•BROWSER SECURITY

Security features may be required for some services, such as banking services or shopping

on a site. For such connections you need security certificates and possibly a security module,

which may be available on your SIM card. For more information, contact your service

provider.

CERTIFICATES

There are three kinds of certificates: server certificates, authority certificates, and user

certificates.

The phone uses a server certificate to improve security in connection between the phone

and the gateway. The phone receives the server certificate from the service provider before

the connection is established and its validity is checked using the authority certificates that

are saved on the phone. Server certificates are not saved.

The security icon is displayed during a connection if the data transmission between the

phone and the gateway (identified by the IP address in the Edit active service settings) is

encrypted.

Services

However, the security icon is not an indication that the data transmission between the

gateway and the content server (place where the requested resource is saved) is secure. It

is up to the service provider to secure the data transmission between the gateway and the

content server.

Authority certificates are used by some services, such as banking, for checking the validity

of other certificates. Authority certificates can be either saved in the security module by the

service provider, or they can be downloaded from the network, if the service supports the

use of authority certificates.

User certificates are issued to users by a Certifying Authority. User certificates are required,

for example, to create a digital signature and they associate the user with a specific private

key in a security module.

While the use of certificates makes the risks involved in remote connections and software

installation considerably smaller, they must be used correctly in order to benefit from

increased security. The existence of a certificate does not offer any protection by itself. The

certificate manager must contain correct, authentic, or trusted certificates for increased

security to be available.

Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is

shown (even if the certificate should be valid), check that the current date and time in your

phone are correct.

Before changing these settings, make sure that you really trust the owner of the certificate

and that the certificate really belongs to the listed owner.

SECURITY MODULE

The security module can contain certificates as well as private and public keys. The security

module may improve the security services for applications requiring browser connection,

and allows you to use a digital signature. The certificates are saved in the security module

by the service provider.

Select Menu > Services > Settings > Security settings > Security module settings. Select

from the following module settings:

Security module details—to show the security module title, status, manufacturer and serial

number.

Module PIN request—to set the phone to ask for the module PIN when using services that

are provided by the security module. Key in the code and select On. To disable the module

PIN request, select Off.

Change module PIN—to change the module PIN, if allowed by the security module. Key in

the current module PIN code; then key in the new code twice.

Change signing PIN—to change a signing PIN. Select the signing PIN that you want to

change. Key in the current PIN code; then key in the new code twice.

DIGITAL SIGNATURE

You can create digital signatures with your phone. The signature can be traced back to you

through the private key in the security module and the user certificate that was used to

create the signature. Using the digital signature may be considered to be equal to a normal

signature on any legal document.

To create a digital signature, select a link on a page, for example, the title of the book you

want to buy and its price. The text that needs to be signed (possibly including amount, date,

etc.) will be shown.

Check that the header text is Read and that the digital signature icon is shown.

Note: If the digital signature icon does not appear, there is a security breach and

you should not enter any personal data such as your signing PIN.

To add the digital signature to the text, read all of the text before you select Sign. The text

may not fit on a single screen. Therefore, make sure to scroll through and read all of the text

before signing.

Select the user certificate that you want to use. Key in the signing PIN and select OK. The

digital signature icon will disappear, and the service may display a confirmation of your

purchase.

SIM services

16 SIM services

In addition to the functions that are available on the phone, your SIM

card may provide additional services that you can access in Menu 10.

Menu 10 is only shown if it is supported by your SIM card. The name and contents of the

menu depend entirely on the service available.

Note: For availability, rates and information on using SIM services, contact your

SIM card vendor.

You can set the phone to show you the confirmation messages that are sent between your

phone and the network when you are using the SIM services by selecting the option Yes

Confirm SIM service actions in Phone settings.

Note: Accessing these services may involve sending a text message (SMS) or

making a phone call for which you may be charged.

17 PC connectivity

You can send and receive e-mail, and access the Internet when your phone is connected to

a compatible PC using an IR or Bluetooth connection, or a data cable. You can use your

phone with a variety of PC connectivity and data communications applications. With PC

Suite you can, for example, synchronize contacts, calendar, to-do notes, and notes between

your phone and the compatible PC.

You can find more information and downloadable files on the Nokia Web site:

www.nokia.com/support/phones/6820.

•PC SUITE

PC Suite contains the following applications:

• Nokia Application Installer to install Java applications from the compatible PC to the

phone.

• Nokia Image Converter to create images in supported formats for portrait images,

multimedia messages, or wallpapers, and to transfer them to your phone.

• Nokia Sound Converter to edit polyphonic ringing tones in supported formats to be

compatible with your phone and transfer them to your phone.

• Nokia Content Copier to copy data or back-up data from your phone to a compatible

PC or to another compatible Nokia phone.

• Nokia Settings Manager to edit and send your browser bookmarks or update the

connection sets to your phone.

• Nokia Phone Editor to send text messages (SMS) and edit the contacts in your phone.

• Nokia Phone Browser to view the contents of the Gallery folder of your phone on a

compatible PC. You can browse picture and audio files in the phone memory and to

transfer them between phone and PC.

• Nokia Multimedia Player to play multimedia (MMS) messages, and audio and video

files. You can also create playlists of your favorite multimedia files.

• Nokia PC Sync to synchronize contacts, calendar, to-do notes and notes between your

phone and your PC.

• Nokia 6820 data modem drivers to use your phone as a modem.

• Nokia Modem Options to obtain settings for HSCSD and GPRS connections.

• Nokia Connection Manager to select the connection type between the PC and the

phone.

being copied, modified, transferred or forwarded.

EGPRS, HSCSD and CSD

You can use EGPRS, GPRS, HSCSD, and CSD data services. For availability and subscription

to data services, contact your service provider.

PC connectivity

The use of HSCSD service consumes the battery more quickly than normal voice or data

calls. You may need to connect the phone to a charger for the duration of data transfer.

For more information, see “EGPRS modem settings” on page 61.

•DATA COMMUNICATIONS APPLICATIONS

For information on using a data communications application, refer to the documentation

provided with it.

Note: Making or answering phone calls during a computer connection is not

recommended as it might disrupt the operation.

For a better performance during data calls, place the phone on a stationary surface with the

keypad facing downward. Do not move the phone or hold it in your hand during a data call.

18 Enhancements

This section provides information about the batteries,

chargers, and accessories for your phone. Be aware that the

information in this section is subject to change as the

batteries, chargers, and accessories change.

Warning: Use only batteries, chargers and accessories approved by the phone

manufacturer for use with this particular phone model. The use of any other types

may invalidate any approval or warranty applying to the phone, and may be

dangerous. For availability of approved accessories, please check with your dealer.

•SAFETY

• Keep all enhancements out of the reach of small children.

• When you disconnect the power cord of any enhancement, grasp and pull the plug, not

the cord.

• Check regularly that any vehicle-installed enhancements are mounted and are

operating properly.

• Installation of any complex car enhancements must be made by qualified personnel

only.

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from ACP-7, ACP-8, ACP-9, ACP-12, LCH-8, LCH-9,

LCH-12, and AC-1.

•ENHANCEMENTS FOR YOUR PHONE

For detailed information on accessories and enhancements, contact your authorized Nokia

dealer or visit the Nokia Web site at www.nokia.com/us.

Audio

• Wireless Headset (HDW-2)

• Wireless Clip-on Headset (HS-3W)

• Wireless Boom Headset (HS-4W)

• Boom Headset (HDB-4)

• Headset (HS-5)

• Retractable Headset (HS-10)

• HDA Phone Adapter

• LPS-4 Inductive Loopset

Enhancements

Car

• Wireless Car Kit (CARK112)

• Wireless Car Kit (CK-1W)

• Car Installation Kit (CARK 126)

Imaging

• Nokia Observation Camera

• Image Frames (SU-4/7)

• Image Viewer (SU-2)

Messaging

•Digital Pen

Data

• Data Cable (DKU-5)

• Desktop Stand (DCV-14)

Power

• Battery, 850 mAh, Li-ion (BL-5C)

• Retractable Charger (AC-1)

• Travel Charger (ACP 12)

19 Reference Information

•BATTERY INFORMATION

Charging and discharging

Your device is powered by a rechargeable battery. The full performance of a new battery is

achieved only after two or three complete charge and discharge cycles. The battery can be

charged and discharged hundreds of times but it will eventually wear out. When the talk

and standby times are noticeably shorter than normal, buy a new battery. Use only Nokia

approved batteries, and recharge your battery only with Nokia approved chargers

designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not leave

the battery connected to a charger. Overcharging may shorten its lifetime. If left unused, a

fully charged battery will lose its charge over time. Temperature extremes can affect the

ability of your battery to charge.

Use the battery only for its intended purpose. Never use any charger or battery that is

damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic

object such as a coin, clip, or pen causes direct connection of the positive (+) and negative

(-) terminals of the battery. (These look like metal strips on the battery.) This might happen,

for example, when you carry a spare battery in your pocket or purse. Short-circuiting the

terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter

conditions, will reduce the capacity and lifetime of the battery. Always try to keep the

battery between 59°F and 77°F (15°C and 25°C). A device with a hot or cold battery may

not work temporarily, even when the battery is fully charged. Battery performance is

particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire! Dispose of batteries according to local regulations.

Please recycle when possible. Do not dispose as household waste.

•ENHANCEMENTS, BATTERIES, AND CHARGERS

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from ACP-12 travel charger.

Warning:Use only batteries, chargers, and enhancements approved by Nokia for

use with this particular model. The use of any other types may invalidate any

approval or warranty, and may be dangerous.

Reference Information

For availability of approved enhancements, please check with your dealer. When you

disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

Your device and its enhancements may contain small parts. Keep them out of reach of small

children.

•CARE AND MAINTENANCE

Your device is a product of superior design and craftsmanship and should be treated with

care. The suggestions below will help you protect your warranty coverage and enjoy your

device for many years.

• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can

contain minerals that will corrode electronic circuits. If your device does get wet,

remove the battery and allow the device to dry completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic

components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit

boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

• Do not paint the device. Paint can clog the moving parts and prevent proper operation.

• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and

light sensor lenses).

• Use only the supplied or an approved replacement antenna. Unauthorized antennas,

modifications, or attachments could damage the device and may violate regulations

governing radio devices.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest authorized service

facility for service.

•ADDITIONAL SAFETY INFORMATION

Operating environment

Remember to follow any special regulations in force in any area and always switch off your

device when its use is prohibited or when it may cause interference or danger. Use the

device only in its normal operating positions. To maintain compliance with radio frequency

exposure guidelines only use accessories approved by Nokia for use with this device. When

the device is on and being worn on the body, always use an approved carrying case.

Medical devices

Operation of any radio transmitting equipment, including wireless phones, may interfere

with the functionality of inadequately protected medical devices. Consult a physician or the

manufacturer of the medical device to determine if they are adequately shielded from

external RF energy or if you have any questions. Switch off your phone in health care

facilities when any regulations posted in these areas instruct you to do so. Hospitals or

health care facilities may be using equipment that could be sensitive to external RF energy.

PACEMAKERS

Pacemaker manufacturers recommend that a minimum separation of 6 in (15.3 cm) be

maintained between a wireless phone and a pacemaker to avoid potential interference with

the pacemaker. These recommendations are consistent with the independent research by

and recommendations of Wireless Technology Research. To minimize the potential for

interference, persons with pacemakers should

• Always keep the device more than 6 in (15.3 cm) from their pacemaker when the device

is switched on

• Not carry the device in a breast pocket

• Hold the device to the ear opposite the pacemaker

If you have any reason to suspect that interference is taking place, switch off your device

immediately.

HEARING AID

Some digital wireless devices may interfere with some hearing aids. If interference occurs,

consult your service provider.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in

motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)

braking systems, electronic speed control systems, air bag systems. For more information,

check with the manufacturer or its representative of your vehicle or any equipment that has

been added.

Reference Information

Only qualified personnel should service the device, or install the device in a vehicle. Faulty

installation or service may be dangerous and may invalidate any warranty that may apply

to the device. Check regularly that all wireless device equipment in your vehicle is mounted

and operating properly. Do not store or carry flammable liquids, gases, or explosive materials

in the same compartment as the device, its parts, or enhancements. For vehicles equipped

with an air bag, remember that an air bags inflate with great force. Do not place objects,

including installed or portable wireless equipment in the area over the air bag or in the air

bag deployment area. If in-vehicle wireless equipment is improperly installed and the air

bag inflates, serious injury could result.

Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere and obey

all signs and instructions. Potentially explosive atmospheres include areas where you would

normally be advised to turn off your vehicle engine. Sparks in such areas could cause an

explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling

points such as near gas pumps at service stations. Observe restrictions on the use of radio

equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting

operations are in progress. Areas with a potentially explosive atmosphere are often but not

always clearly marked. They include below deck on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas

where the air contains chemicals or particles such as grain, dust or metal powders.

FCC regulations prohibit using your wireless device while in the air. The use of wireless

telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the

wireless telephone network, and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone services

to the offender, legal action, or both.

EMERGENCY CALLS

Important:Wireless phones, including this phone, operate using radio signals,

wireless networks, landline networks, and user-programmed functions. Because of

this, connections in all conditions cannot be guaranteed. You should never rely

solely on any wireless phone for essential communications like medical

emergencies.

To make an emergency call:

1If the phone is not on, switch it on. Check for adequate signal strength. Some networks

may require that a valid SIM card is properly inserted in the phone.

2Press End key as many times as needed to clear the display and ready the phone for

calls.

3Key in the official emergency number for your present location. Emergency numbers

vary by location.

4Press the Talk key.

If certain features are in use, you may first need to turn those features off before you can

make an emergency call. Consult this guide or your service provider. When making an

emergency call, give all the necessary information as accurately as possible. Your wireless

phone may be the only means of communication at the scene of an accident. Do not end

the call until given permission to do so.

CERTIFICATION INFORMATION (SAR)

THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO

WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not

to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal

Communications Commission of the U.S. Government. These limits are part of

comprehensive guidelines and establish permitted levels of RF energy for the general

population. The guidelines are based on standards that were developed by independent

scientific organizations through periodic and thorough evaluation of scientific studies. The

standards include a substantial safety margin designed to assure the safety of all persons,

regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement known

as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for

SAR are conducted using standard operating positions accepted by the FCC with the phone

transmitting at its highest certified power level in all tested frequency bands. Although the

SAR is determined at the highest certified power level, the actual SAR level of the phone

while operating can be well below the maximum value. This is because the phone is

designed to operate at multiple power levels so as to use only the power required to reach

the network. In general, the closer you are to a wireless base station antenna, the lower the

power output.

Before a phone model is available for sale to the public, it must be tested and certified to

the FCC that it does not exceed the limit established by the government-adopted

requirement for safe exposure. The tests are performed in positions and locations (for

example, at the ear and worn on the body) as required by the FCC for each model.

The highest SAR value for the Nokia 6820a model phone as reported to the FCC when tested

for use at the ear is 0.66 W/kg, and when worn on the body, as described in this user guide,

is 1.20 W/kg. The highest SAR value for the Nokia 6820b model phone as reported to the

FCC when tested for use at the ear is 0.78 W/kg, and when worn on the body, as described

in this user guide, is 0.87 W/kg. (Body-worn measurements differ among phone models,

depending upon available enhancements and FCC requirements).

While there may be differences between the SAR levels of various phones and at various

positions, they all meet the government requirement. The FCC has granted an Equipment

Authorization for this model phone with all reported SAR levels evaluated as in compliance

Reference Information

with the FCC RF exposure guidelines. SAR information on this model phone is on file with

the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid

after searching on FCC ID PYANHL-9 for the Nokia 6280a model and FCC ID PYARH-26 for

the Nokia 6820b model.

For body worn operation, this phone has been tested and meets the FCC RF exposure

guidelines for use with a carry case, belt clip, or holder that contains no metal and that

positions the handset a minimum of 5/8-inch (1.5 cm) from the body. Use of other carry

cases, belt clips, or holders may not ensure compliance with FCC RF exposure guidelines. If

you do not use a body-worn accessory and are not holding the phone at the ear, position

the handset a minimum of 5/8-inch (1.5 cm) from your body when the phone is switched on.

*In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6

watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a

substantial margin of safety to give additional protection for the public and to account for

any variations in measurements. SAR values may vary depending on national reporting

requirements and the network band. For SAR information in other regions please look under

product information at www.nokia.com.

•TECHNICAL INFORMATION

Weight 3.5 oz (100 g) with BL-5C 850–mAh semi-fixed Li-Ion Battery

Size Volume: 4.8 cubic inches (79 cc)

Length: 4.2 in (106.1 mm closed)

Width: 1.8 in (46.1 mm) at hinges, 1.5 in (38 mm) at bottom

Thickness: .8 in (21.6 mm) at top, .7 in (17 mm at bottom)

Frequency range 6820a

GSM900 880.2–914.8 MHz (TX)

925.2–959.8 MHz (RX)

GSM1800 1710.2–1784.8 MHz (TX)

1805.2–1879.8 (RX)

GSM1900 1850.2–1909.8 MHz (TX)

1930.2–1989.8 (RX)

6820b

GSM850 824.2–848.8 MHz (TX)

869.2–893.8 MHz (RX)

GSM1800 1710.2–1784.8 MHz (TX)

1805.2–1879.8 (RX)

GSM1900 1850.2–1909.8 MHz (TX)

1930.2–1989.8 (RX)

Transmitter

output power Up to 2 W

Battery voltage 3.7 V

Operating

temperature 14°F to + 131°F (-10°C to +55°C)

aTalk time,

standby time

a. Battery talk and standby times are estimates only and depend on signal strength, network

conditions, features used, battery age and condition (including the effect of charging habits),

temperatures to which battery is exposed, use in digital mode, and many other factors. Please

note that the amount of time a phone is used for calls will affect its standby time. Likewise, the

amount of time that the phone is turned on and in the standby mode will affect its talk time.

Talk time: up to 7 hours

Stand-by time: up to 10 days

Reference Information

•NOKIA ONE-YEAR LIMITED WARRANTY

Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from defects in

material and workmanship that result in Product failure during normal usage, according to

the following terms and conditions:

1The limited warranty for the Product extends for ONE (1) year beginning on the date of

the purchase of the Product. This one year period is extended by each whole day that

the Product is out of your possession for repair under this warranty.

2The limited warranty extends only to the original purchaser (“Consumer”) of the Product

and is not assignable or transferable to any subsequent purchaser/end-user.

3The limited warranty extends only to Consumers who purchase the Product in the

United States of America.

4During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole option,

any defective parts, or any parts that will not properly operate for their intended use

with new or refurbished replacement items if such repair or replacement is needed

because of product malfunction or failure during normal usage. No charge will be made

to the Consumer for any such parts. Nokia will also pay for the labor charges incurred

by Nokia in repairing or replacing the defective parts. The limited warranty does not

cover defects in appearance, cosmetic, decorative or structural items, including

framing, and any non-operative parts. Nokia’s limit of liability under the limited

warranty shall be the actual cash value of the Product at the time the Consumer

returns the Product for repair, determined by the price paid by the Consumer for the

Product less a reasonable amount for usage. Nokia shall not be liable for any other

losses or damages. These remedies are the Consumer’s exclusive remedies for breach of

warranty.

5Upon request from Nokia, the Consumer must prove the date of the original purchase

of the Product by a dated bill of sale or dated itemized receipt.

6The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne,

Florida. Nokia shall bear the cost of shipping the Product back to the Consumer after

the completion of service under this limited warranty.

7The Consumer shall have no coverage or benefits under this limited warranty if any of

the following conditions are applicable:

a) The Product has been subjected to abnormal use, abnormal conditions, improper

storage, exposure to moisture or dampness, unauthorized modifications,

unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident,

alteration, improper installation, or other acts which are not the fault of Nokia,

including damage caused by shipping.

b) The Product has been damaged from external causes such as collision with an

object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or

damage from exposure to weather conditions, an Act of God, or battery leakage,

theft, blown fuse, or improper use of any electrical source, damage caused by

computer or Internet viruses, bugs, worms, Trojan Horses, cancelbots or damage

caused by the connection to other products not recommended for interconnection

by Nokia.

c) Nokia was not advised in writing by the Consumer of the alleged defect or

malfunction of the Product within fourteen (14) days after the expiration of the

applicable limited warranty period.

d) The Product serial number plate or the enhancement data code has been removed,

defaced or altered.

e) The defect or damage was caused by the defective function of the cellular system

or by inadequate signal reception by the external antenna, or viruses or other

software problems introduced into the Product.

8Nokia does not warrant uninterrupted or error-free operation of the Product. If a

problem develops during the limited warranty period, the Consumer shall take the

following step-by-step procedure:

a) The Consumer shall return the Product to the place of purchase for repair or

replacement processing.

b) If “a” is not convenient because of distance (more than 50 miles) or for other good

cause, the Consumer shall ship the Product prepaid and insured to:

Nokia Inc., Attn: Repair Department

795 West Nasa Blvd.

Melbourne, FL 32901

c) The Consumer shall include a return address, daytime phone number and/or fax

number, complete description of the problem, proof of purchase and service

agreement (if applicable). Expenses related to removing the Product from an

installation are not covered under this limited warranty.

d) The Consumer will be billed for any parts or labor charges not covered by this

limited warranty. The Consumer will be responsible for any expenses related to

reinstallation of the Product.

e) Nokia will repair the Product under the limited warranty within 30 days after

receipt of the Product. If Nokia cannot perform repairs covered under this limited

warranty within 30 days, or after a reasonable number of attempts to repair the

same defect, Nokia at its option, will provide a replacement Product or refund the

purchase price of the Product less a reasonable amount for usage. In some states

the Consumer may have the right to a loaner if the repair of the Product takes

more than ten (10) days. Please contact the Customer Service Center at Nokia at

the telephone number listed at the end of this warranty if you need a loaner and

the repair of the Product has taken or is estimated to take more than ten (10) days.

Reference Information

f) If the Product is returned during the limited warranty period, but the problem with

the Product is not covered under the terms and conditions of this limited warranty,

the Consumer will be notified and given an estimate of the charges the Consumer

must pay to have the Product repaired, with all shipping charges billed to the

Consumer. If the estimate is refused, the Product will be returned freight collect.

If the Product is returned after the expiration of the limited warranty period,

Nokia’s normal service policies shall apply and the Consumer will be responsible for

all shipping charges.

9You (the Consumer) understand that the product may consist of refurbished equipment

that contains used components, some of which have been reprocessed. The used

components comply with Product performance and reliability specifications.

10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR

PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING LIMITED

WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY IS THE

CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR SPECIAL,

INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED

TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS

OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED

EQUIPMENT, COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES,

DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS, AND

INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE PRODUCT OR

ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE,

STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF

THE LIKELIHOOD OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN

RENDERING SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE

PERIOD THAT THE PRODUCT IS BEING REPAIRED.

11 Some states do not allow limitation of how long an implied warranty lasts, so the one

year warranty limitation may not apply to you (the Consumer). Some states do not

allow the exclusion or limitation of incidental and consequential damages, so certain

of the above limitations or exclusions may not apply to you (the Consumer). This limited

warranty gives the Consumer specific legal rights and the Consumer may also have

other rights which vary from state to state.

12 Nokia neither assumes nor authorizes any authorized service center or any other person

or entity to assume for it any other obligation or liability beyond that which is expressly

provided for in this limited warranty including the provider or seller of any extended

warranty or service agreement.

13 This is the entire warranty between Nokia and the Consumer, and supersedes all prior

and contemporaneous agreements or understandings, oral or written, relating to the

Product, and no representation, promise or condition not contained herein shall modify

these terms.

14 This limited warranty allocates the risk of failure of the Product between the Consumer

and Nokia. The allocation is recognized by

the Consumer and is reflected in the purchase price.

15 Any action or lawsuit for breach of warranty must be commenced within eighteen (18)

months following purchase of the Product.

16 Questions concerning this limited warranty may be directed to:

Nokia Inc.

Attn: Customer Service

7725 Woodland Center Blvd., Ste. 150

Tampa, FL 33614

Telephone: 1-888-NOKIA-2U (1-888-665-4228)

Facsimile: (813) 287-6612

TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)

17 The limited warranty period for Nokia supplied attachments and accessories is

specifically defined within their own warranty cards and packaging.

Reference Information

Manufactured or sold under one or more of the following US Patents. Pending patent

numbers are shown with an asterisk (*).

162111 177166 4868846 4945633 5001372 5053928

5083240 5101175 5124672 5151946 5152004 5173927

5212834 5230091 5241583 5266782 5271056 5311151

5317283 5331638 5335362 5341149 5353328 5371481

5378935 5384782 5390223 5392460 5396657 5400949

5408504 5416435 5430740 5442521 5444816 5446364

5446422 5477422 5479476 5487084 5526366 5534878

5548616 5551067 5553125 5557639 5565821 5566201

5570369 5581244 5594797 5600708 5606548 5613235

5625274 5640395 5664053 5675611 5677620 5692032

5697074 5699482 5701392 5722074 5729541 5760568

5787341 5794142 5797102 5802465 5805301 5809413

5819165 5821891 5822366 5827082 5835858 5835889

5839101 5842141 5844884 5845219 5850607 5857151

5859843 5862178 5870683 5884103 5884190 5889770

5898775 5898925 5903832 5903839 5907823 5912570

5914690 5914796 5917868 5920826 5926147 5926769

5929813 5930233 5946651 5953665 5956332 5956625

5956633 5960354 5960389 5963901 5966378 5977887

5983081 5987137 5987639 5991857 6005857 6006114

6009328 6011853 6011971 6014113 6014551 6014573

6025802 6026161 6028567 6031827 6035189 6035194

6038238 6043760 6047196 6049796 6050415 6054954

6054966 6055439 6060193 6069923 6072787 6073001

6079993 6081732 6084471 6084855 6084920 6084962

6088746 6094587 6097964 6105784 6112099 6115617

6118775 6119002 6119180 6121846 6122498 6128322

6128509 6130650 6133884 6137789 6138091 6140966

6144243 6144676 6148209 6151485 6151507 6163609

6164547 6167038 6167248 6167273 6170073 6171127

6178535 6182101 6184592 6185295 6185302 6185422

6188909 6195338 6199035 6201712 6201876 6202109

6219560 6223037 6223059 6230020 6240076 6249584

6259312 6262735 6266321 6266330 6269126 6271794

6272361 6282436 6285888 6292668 6295286 6307512

6308084 6311054 6314166 6317083 6324389 6324412

6333716 6347218 6356759 6359865 6359904 6363259

6370362 6370389 6377803 6377820 6381468 6385254

6385451 6392605 6392660 6400958 6417817 6430163

6434133 6437711 6438370 6445932 6453179 6456237

6456826 6463278 6470470 6487397 6510148 6522670

6591116 6606508

109

Appendix A Message from the

CTIA

(Cellular Telecommunications

& Internet Association)

to all users of mobile phones.

Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.

Phone: (202) 785-0081

Safety is the most important call you will ever make.

A Guide to Safe and Responsible Wireless Phone Use

Tens of millions of people in the U.S. today take advantage of the unique

combination of convenience, safety and value delivered by the wireless telephone.

Quite simply, the wireless phone gives people the powerful ability to communicate

by voice--almost anywhere, anytime--with the boss, with a client, with the kids,

with emergency personnel or even with the police. Each year, Americans make

billions of calls from their wireless phones, and the numbers are rapidly growing.

But an important responsibility accompanies those benefits, one that every wireless

phone user must uphold. When driving a car, driving is your first responsibility. A

wireless phone can be an invaluable tool, but good judgment must be exercised at

all times while driving a motor vehicle--whether on the phone or not.

The basic lessons are ones we all learned as teenagers. Driving requires alertness,

caution and courtesy. It requires a heavy dose of basic common sense---keep your

head up, keep your eyes on the road, check your mirrors frequently and watch out

for other drivers. It requires obeying all traffic signs and signals and staying within

the speed limit. It means using seatbelts and requiring other passengers to do the

same.

But with wireless phone use, driving safely means a little more. This brochure is a

call to wireless phone users everywhere to make safety their first priority when

behind the wheel of a car. Wireless telecommunications is keeping us in touch,

simplifying our lives, protecting us in emergencies and providing opportunities to

help others in need.

When it comes to the use of wireless phones, safety is your most important call.

Wireless Phone "Safety Tips"

Below are safety tips to follow while driving and using a wireless phone which

should be easy to remember.

1 Get to know your wireless phone and its features such as speed dial and redial.

Carefully read your instruction manual and learn to take advantage of valuable

features most phones offer, including automatic redial and memory. Also, work

to memorize the phone keypad so you can use the speed dial function without

taking your attention off the road.

2 When available, use a hands free device. A number of hands free wireless phone

accessories are readily available today. Whether you choose an installed mounted

device for your wireless phone or a speaker phone accessory, take advantage of

these devices if available to you.

3 Position your wireless phone within easy reach. Make sure you place your

wireless phone within easy reach and where you can grab it without removing

your eyes from the road. If you get an incoming call at an inconvenient time, if

possible, let your voice mail answer it for you.

4 Suspend conversations during hazardous driving conditions or situations. Let

the person you are speaking with know you are driving; if necessary, suspend the

111

call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice

can be hazardous, but so is heavy traffic. As a driver, your first responsibility is

to pay attention to the road.

5 Do not take notes or look up phone numbers while driving. If you are reading an

address book or business card, or writing a "to do" list while driving a car, you

are not watching where you are going. It’s common sense. Don’t get caught in a

dangerous situation because you are reading or writing and not paying attention

to the road or nearby vehicles.

6 Dial sensibly and assess the traffic; if possible, place calls when you are not

moving or before pulling into traffic. Try to plan your calls before you begin your

trip or attempt to coincide your calls with times you may be stopped at a stop

sign, red light or otherwise stationary. But if you need to dial while driving,

follow this simple tip--dial only a few numbers, check the road and your mirrors,

then continue.

7 Do not engage in stressful or emotional conversations that may be distracting.

Stressful or emotional conversations and driving do not mix--they are

distracting and even dangerous when you are behind the wheel of a car. Make

people you are talking with aware you are driving and if necessary, suspend

conversations which have the potential to divert your attention from the road.

8 Use your wireless phone to call for help. Your wireless phone is one of the

greatest tools you can own to protect yourself and your family in dangerous

situations--with your phone at your side, help is only three numbers away. Dial

9-1-1 or other local emergency number in the case of fire, traffic accident, road

hazard or medical emergency. Remember, it is a free call on your wireless phone!

9 Use your wireless phone to help others in emergencies. Your wireless phone

provides you a perfect opportunity to be a "Good Samaritan" in your

community. If you see an auto accident, crime in progress or other serious

emergency where lives are in danger, call 9-1-1 or other local emergency number,

as you would want others to do for you.

10 Call roadside assistance or a special wireless non-emergency assistance number

when necessary. Certain situations you encounter while driving may require

attention, but are not urgent enough to merit a call for emergency services. But

you still can use your wireless phone to lend a hand. If you see a broken-down

vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident

where no one appears injured or a vehicle you know to be stolen, call roadside

assistance or other special non-emergency wireless number.

Careless, distracted individuals and people driving irresponsibly represent a hazard

to everyone on the road. Since 1984, the Cellular Telecommunications Industry

Association and the wireless industry have conducted educational outreach to

inform wireless phone users of their responsibilities as safe drivers and good

citizens. As we approach a new century, more and more of us will take advantage of

the benefits of wireless telephones. And, as we take to the roads, we all have a

responsibility to drive safely.

The wireless industry reminds you to use your phone safely when driving.

For more information, please call 1-888-901-SAFE.

For updates: http://www.wow-com.com/consumer/issues/driving/

articles.cfm?ID=85

Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036. Phone:

(202) 785-0081

113

Appendix B Message from the

FDA

(U.S. Food and Drug

Administration) to all users

of mobile phones.

114

Consumer Update on Wireless Phones

U.S. Food and Drug Administration

1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are

associated with using wireless phones. There is no proof, however, that wireless

phones are absolutely safe. Wireless phones emit low levels of radiofrequency

energy (RF) in the microwave range while being used. They also emit very low levels

of RF when in the stand-by mode. Whereas high levels of RF can produce health

effects (by heating tissue), exposure to low level RF that does not produce heating

effects causes no known adverse health effects. Many studies of low level RF

exposures have not found any biological effects. Some studies have suggested that

some biological effects may occur, but such findings have not been confirmed by

additional research. In some cases, other researchers have had difficulty in

reproducing those studies, or in determining the reasons for inconsistent results.

2. What is FDA's role concerning the safety of wireless phones?

Under the law, FDA does not review the safety of radiation-emitting consumer

products such as wireless phones before they can be sold, as it does with new drugs

or medical devices. However, the agency has authority to take action if wireless

phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to

the user. In such a case, FDA could require the manufacturers of wireless phones to

notify users of the health hazard and to repair, replace or recall the phones so that

the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions, FDA has

urged the wireless phone industry to take a number of steps, including the

following:

• Support needed research into possible biological effects of RF of the type

emitted by wireless phones;

• Design wireless phones in a way that minimizes any RF exposure to the user

that is not necessary for device function; and

• Cooperate in providing users of wireless phones with the best possible

information on possible effects of wireless phone use on human health.

FDA belongs to an interagency working group of the federal agencies that have

responsibility for different aspects of RF safety to ensure coordinated efforts at the

federal level. The following agencies belong to this working group:

• National Institute for Occupational Safety and Health

• Environmental Protection Agency

• Federal Communications Commission

• Occupational Safety and Health Administration

• National Telecommunications and Information Administration

The National Institutes of Health participates in some interagency working group

activities, as well.

115

FDA shares regulatory responsibilities for wireless phones with the Federal

Communications Commission (FCC). All phones that are sold in the United States

must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA

and other health agencies for safety questions about wireless phones. FCC also

regulates the base stations that the wireless phone networks rely upon. While these

base stations operate at higher power than do the wireless phones themselves, the

RF exposures that people get from these base stations are typically thousands of

times lower than those they can get from wireless phones. Base stations are thus not

the subject of the safety questions discussed in this document.

3. What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held wireless phones with built-in

antennas, often called cell mobile or PCS phones. These types of wireless phones

can expose the user to measurable radiofrequency energy (RF) because of the short

distance between the phone and the user’s head. These RF exposures are limited by

Federal Communications Commission safety guidelines that were developed with

the advice of FDA and other federal health and safety agencies. When the phone is

located at greater distances from the user, the exposure to RF is drastically lower

because a person's RF exposure decreases rapidly with increasing distance from the

source. The so-called cordless phones; which have a base unit connected to the

telephone wiring in a house, typically operate at far lower power levels, and thus

produce RF exposures far below the FCC safety limits.

4. What are the results of the research done already?

The research done thus far has produced conflicting results, and many studies have

suffered from flaws in their research methods. Animal experiments investigating the

effects of radiofrequency energy (RF) exposures characteristic of wireless phones

have yielded conflicting results that often cannot be repeated in other laboratories.

A few animal studies, however, have suggested that low levels of RF could accelerate

the development of cancer in laboratory animals. However, many of the studies that

showed increased tumor development used animals that had been genetically

engineered or treated with cancer-causing chemicals so as to be pre-disposed to

develop cancer in the absence of RF exposure. Other studies exposed the animals to

RF for up to 22 hours per day. These conditions are not similar to the conditions

under which people use wireless phones, so we don’t know with certainty what the

results of such studies mean for human health.

Three large epidemiology studies have been published since December 2000.

Between them, the studies investigated any possible association between the use of

wireless phones and primary brain cancer, glioma, meningioma, or acoustic

neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None

of the studies demonstrated the existence of any harmful health effects from

wireless phone RF exposures. However, none of the studies can answer questions

about long-term exposures, since the average period of phone use in these studies

was around three years.

5.What research is needed to decide whether RF exposure from wireless

phones poses a health risk?

116

A combination of laboratory studies and epidemiological studies of people actually

using wireless phones would provide some of the data that are needed. Lifetime

animal exposure studies could be completed in a few years. However, very large

numbers of animals would be needed to provide reliable proof of a cancer

promoting effect if one exists. Epidemiological studies can provide data that is

directly applicable to human populations, but 10 or more years follow-up may be

needed to provide answers about some health effects, such as cancer. This is because

the interval between the time of exposure to a cancer-causing agent and the time

tumors develop - if they do - may be many, many years. The interpretation of

epidemiological studies is hampered by difficulties in measuring actual RF exposure

during day-to-day use of wireless phones. Many factors affect this measurement,

such as the angle at which the phone is held, or which model of phone is used.

6. What is FDA doing to find out more about the possible health effects

of wireless phone RF?

FDA is working with the U.S. National Toxicology Program and with groups of

investigators around the world to ensure that high priority animal studies are

conducted to address important questions about the effects of exposure to

radiofrequency energy (RF).

FDA has been a leading participant in the World Health Organization International

Electromagnetic Fields (EMF) Project since its inception in 1996. An influential

result of this work has been the development of a detailed agenda of research needs

that has driven the establishment of new research programs around the world. The

Project has also helped develop a series of public information documents on EMF

issues.

FDA and the Cellular Telecommunications & Internet Association (CTIA) have a

formal Cooperative Research and Development Agreement (CRADA) to do

research on wireless phone safety. FDA provides the scientific oversight, obtaining

input from experts in government, industry, and academic organizations. CTIA-

funded research is conducted through contracts to independent investigators. The

initial research will include both laboratory studies and studies of wireless phone

users. The CRADA will also include a broad assessment of additional research

needs in the context of the latest research developments around the world.

7. How can I find out how much radiofrequency energy exposure I can

get by using my wireless phone?

All phones sold in the United States must comply with Federal Communications

Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures.

FCC established these guidelines in consultation with FDA and the other federal

health and safety agencies. The FCC limit for RF exposure from wireless telephones

is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The

FCC limit is consistent with the safety standards developed by the Institute of

Electrical and Electronic Engineering (IEEE) and the National Council on

Radiation Protection and Measurement. The exposure limit takes into

consideration the body’s ability to remove heat from the tissues that absorb energy

from the wireless phone and is set well below levels known to have effects.

117

Manufacturers of wireless phones must report the RF exposure level for each model

of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives

directions for locating the FCC identification number on your phone so you can find

your phone’s RF exposure level in the online listing.

8. What has FDA done to measure the radiofrequency energy coming

from wireless phones?

The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical

standard for measuring the radiofrequency energy (RF) exposure from wireless

phones and other wireless handsets with the participation and leadership of FDA

scientists and engineers. The standard, Recommended Practice for Determining the

Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless

Communications Devices: Experimental Techniques, sets forth the first consistent

test methodology for measuring the rate at which RF is deposited in the heads of

wireless phone users. The test method uses a tissue-simulating model of the human

head. Standardized SAR test methodology is expected to greatly improve the

consistency of measurements made at different laboratories on the same phone.

SAR is the measurement of the amount of energy absorbed in tissue, either by the

whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g)

of matter. This measurement is used to determine whether a wireless phone

complies with safety guidelines.

9. What steps can I take to reduce my exposure to radiofrequency

energy from my wireless phone?

If there is a risk from these products--and at this point we do not know that there

is--it is probably very small. But if you are concerned about avoiding even potential

risks, you can take a few simple steps to minimize your exposure to radiofrequency

energy (RF). Since time is a key factor in how much exposure a person receives,

reducing the amount of time spent using a wireless phone will reduce RF exposure.

If you must conduct extended conversations by wireless phone every day, you

could place more distance between your body and the source of the RF, since the

exposure level drops off dramatically with distance. For example, you could use a

headset and carry the wireless phone away from your body or use a wireless phone

connected to a remote antenna.

Again, the scientific data do not demonstrate that wireless phones are harmful. But

if you are concerned about the RF exposure from these products, you can use

measures like those described above to reduce your RF exposure from wireless

phone use.

10. What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones,

including children and teenagers. If you want to take steps to lower exposure to

radiofrequency energy (RF), the measures described above would apply to children

and teenagers using wireless phones. Reducing the time of wireless phone use and

increasing the distance between the user and the RF source will reduce RF

exposure.Some groups sponsored by other national governments have advised that

children be discouraged from using wireless phones at all. For example, the

118

government in the United Kingdom distributed leaflets containing such a

recommendation in December 2000. They noted that no evidence exists that using

a wireless phone causes brain tumors or other ill effects. Their recommendation to

limit wireless phone use by children was strictly precautionary; it was not based on

scientific evidence that any health hazard exists.

11. What about wireless phone interference with medical equipment?

Radiofrequency energy (RF) from wireless phones can interact with some electronic

devices. For this reason, FDA helped develop a detailed test method to measure

electromagnetic interference (EMI) of implanted cardiac pacemakers and

defibrillators from wireless telephones. This test method is now part of a standard

sponsored by the Association for the Advancement of Medical instrumentation

(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and

many other groups, was completed in late 2000. This standard will allow

manufacturers to ensure that cardiac pacemakers and defibrillators are safe from

wireless phone EMI. FDA has tested hearing aids for interference from handheld

wireless phones and helped develop a voluntary standard sponsored by the Institute

of Electrical and Electronic Engineers (IEEE). This standard specifies test methods

and performance requirements for hearing aids and wireless phones so that no

interference occurs when a person uses a compatible phone and a accompanied

hearing aid at the same time. This standard was approved by the IEEE in 2000.

FDA continues to monitor the use of wireless phones for possible interactions with

other medical devices. Should harmful interference be found to occur, FDA will

conduct testing to assess the interference and work to resolve the problem.

12. Where can I find additional information?

For additional information, please refer to the following resources:

• FDA web page on wireless phones

http://www.fda.gov/cdrh/phones/index.html

• Federal Communications Commission (FCC) RF Safety Program

http://www.fcc.gov/oet/rfsafety

• International Commission on Non-Ionizing Radiation Protection

http://www.icnirp.de

• World Health Organization (WHO) International EMF Project

http://www.who.int/emf

• National Radiological Protection Board (UK)

http://www.nrpb.org.uk/

July 18, 2001For updates: http://www.fda.gov/cdrh/phones

Index

Numerics

1-touch dial 50

accented characters 25

access codes 64

accessibility 7

alarm clock 71

allow multimedia reception setting 40

answer a call 23

anykey answer 61

applications 80

archive folder 31

battery

charger connector 8

how to charge 10

installation 8

birthday notes in calendar 72

Bluetooth connections 59

bookmarks 87

brightness setting for display 56

browser security 88

business cards 50

cache memory 88

calculator 82

calendar 31, 71

call forwarding 61

call restricting 64

call timers 43

call waiting 23, 62

caller groups 52

caller ID 23

camera 69

certificates 88

characters, typing 25

charge battery 10

clock 56

closed user group 64

codes 11

color schemes 56

conference calls 24

connectivity 57, 92

connectors 8

contacts

add images 46

caller groups 52

edit details 47

how to add 45

in my presence 49

searching 46

contrast setting for display 56

convert currency 82

cookies 87

countdown timer 83

counter

for GPRS data 44

for text messages 33

currency conversion 82

Customer Care Center 12

data cable connector 8

date setting 56

default slide timing setting 40

delete

distribution lists 33

text messages 36

dialed numbers 43

dictionary 26

digital signature 90

display contrast 56

distribution lists 32

downloaded applications 80

downloads 87

DTMF tone strings 24

EGPRS 60

e-mail

how to reply 38

required setup 36

send later option 37

settings 41

write and send 37

e-newsletters 7

enhancement settings 63

enhancements for phone 94

enter text

keyboard closed 26

keyboard open 25

environment profiles 54

factory settings 66

fixed dialing 64

folders

create 32

font size setting 42

formats for multimedia messages 33

free memory 45

frequencies 5

gallery menu 67

games 79

GPRS

connection timer 44

data counter 44

group lists, see distribution lists

hands-free option 24

headset connector 8

Help screens 63

IM alert tone 55

images

add to contacts 46

editing 67

in multimedia messages 33

IMEI number 12

information label 12

infrared 59

install SIM card and battery 8

international mobile equipment identity,

see IMEI

keyboard

functions when closed 15

how to enter text 25, 26

how to open 13

key functions when open 16

keypad

lock 62

tones 55

language selection 62

lap timer 83

last number redial 22

lock phone keypad 62

loudspeaker 24

memory

setting for phone or SIM 45

sharing 6

status 45, 62

menu shortcuts 28

message center number 39

message counter 33

messages

alert tone 55

font size setting 42

send business cards 50

tips for text messages 27

microphone connector 8

missed calls 43

MMS, see multimedia messages 33

model number 5

module PIN 65, 89

multimedia memory full message 36

multimedia messages 33

folders 35

how to create 34

how to reply 35

supported formats 33

my presence feature 47

newsletters 7

Nokia 12

Customer Care Center 12

newsletters 7

warranty Web site 7

PC Suite 92

phone

how to hold 11

how to register 7

illustration 3

location of antenna 11

model number 5

network frequencies 5

phone illustration 3

pictures

in multimedia messages 33

PIN code

message when phone is turned on 11

request 64

power key 15

predictive text 26

profiles

Bluetooth technology 57

environment 54

quick guide 4

received calls 43

record

sounds and speech 81

video clips 70

redial

automatically 61

number 22

reminders in calendar 73

restriction password 65

right selection key options 57

ringing options 55

save contact numbers 52

scale image down setting 40

screen saver timeout 56

search for a contact 46

security

code 65

keyguard 62

level 64

module 89

settings 64

send DTMF tone strings 24

service

commands 42

inbox 88

settings

Bluetooth connections 58

calls 61

camera 69

display contrast 56

EGPRS 61

for contacts 45

for display 55

for e-mail 41

for enhancements 63

for font size 42

for text and e-mail 39

IM and my presence 54

security 64

synchronization 77

time and date 56

wallet 76

shared memory 6

shortcuts 57

signing PIN 65

silence feature 23

SIM 52

SIM card

error messages 11

how to insert 9

installation 8

select as memory in use 45

service confirmation messages 63

SMS, see text messages

sound files 33

special characters 25

speed dial 50

split timer 83

standby times and talk times 102

start-up tone 63

stopwatch 83

subscribed contacts in my presence 49

swap option for calls on hold 24

synchronization 76

talk time 102

templates 32

text messages

add to calendar 31

counter 33

enter with keyboard closed 26

enter with keyboard open 25

how to reply 30

messages 29

send to a group 30

SMS messages 29

templates for 32

tips for writing 27

time setting 56

timers

countdown 83

for GPRS connection 44

for phone calls 43

lap times 83

split times 83

to-do list 73

tone setting profiles 54

troubleshooting 12

contact Nokia 12

multimedia memory full 36

SIM card messages 11

TTY information 12

unlock phone keypad 62

USSD commands 42

vibrating alert 55

video

add clips to messages 33

record a video clip 70

voice dial 51

voice mailbox 22

voice messages 38

voice recorder 81

wallet

code 65

purchases 74

wallpaper 55

warning tones 55

warranty registration 7

Web site for accessibility 7

welcome note on display 63

93550999876543

Para obtener un manual del usuario en español favor de llamar o enviar

un fax al teléfono 1-888-NOKIA-2U, fax 813-249-9619.

Microsoft RH-26 GSM 850/1800/1900 Cellular Telephone Bluetooth User Manual 6820 ENv1 9310322

Microsoft Mobile Oy GSM 850/1800/1900 Cellular Telephone Bluetooth 6820 ENv1 9310322

Contents

Users manual

Navigation menu

Namespaces

Views

Navigation