Microsoft RH-30 GSM 900/1800/1900 Cellular Telephone User Manual ug cover

Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone ug cover

UserManual.wiki >

Microsoft >

RH 30 User Manual HTML Version

Manual

26 Aug 2003

User Guide FCC ID: LJPRH-30

IC: 661E-RH30

USER GUIDE

Following is a preliminary draft copy of the US English User Guide for FCC ID: LJPRH-30,

IC: 661E-RH30

Nokia 3200 User Guide

What information is

needed? Numbers Where is the number?

My number Wireless service provider

Voice mail number Wireless service provider

Wireless provider’s number Wireless service provider

Provider’s customer care Wireless service provider

Model number 3200 Label on back of phone

(under battery)

Phone type Label on back of phone

(under battery)

Electronic serial number

(ESN)

Label on back of phone

(under battery). See “Find

information about your

phone” on page 9.

LEGAL INFORMATION

Part No. 9310067, Issue No. 1

Nokia, Nokia Connecting People, Nokia 3200, and the Nokia Original

Enhancements logos are trademarks or registered trademarks of Nokia Corporation.

Other company and product names mentioned herein may be trademarks or trade

names of their respective owners.

Printed in Canada 09/2003

rights reserved.

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 3200

product. Nokia operates a policy of ongoing development. Nokia reserves the right

to make changes to any of the products described in this document without prior

notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF

DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR

INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT

ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY APPLICABLE LAW, NO

WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND

RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO

REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS

This device contains commodities, technology, or software exported from the

United States in accordance with the Export Administration regulations. Diversion

contrary to U.S. or Canadian law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a

telephone in close proximity to receiving equipment). The FCC or Industry Canada

can require you to stop using your telephone if such interference cannot be

eliminated. If you require assistance, contact your local service facility. This device

complies with part 15 of the FCC rules. Operation is subject to the condition that

this device does not cause harmful interference.

Manufactured or sold under one or more following US Patents.

Asterisk (*) indicates design patents pending.

RE 32,580 4558302 4868846 4945633 4969192 5001372

5101175 5151946 5173927 5212834 5230091 5241583

5311151 5317283 5331638 5335362 5353328 5371481

5378935 5384782 5396657 5400949 5416435 5442521

5446364 5479476 5526366 5553125 5557639 5565821

5570369 5581244 5600708 5625274 5677620 5692032

5729541 5760568 5794142 5802465 5809413 5818437

5827082 5839101 5844884 5845219 5870683 5884103

5889770 5907823 5912570 5914690 5914796 5917868

5920826 5953541 5956332 5956625 5956633 5966378

5977887 5987137 5991857 6006114 6011554 6011853

6014551 6014573 6026161 6035189 6038238 6043760

6047196 6049796 6050415 6055439 6060193 6069923

6072787 6081732 6084920 6084962 6094587 6097964

6105784 6112099 6115617 6119180 6121846 6128509

6138091 6140966 6144243 6144676 6148209 6151485

6151507 6163609 6164547 6167248 6185295 6188909

6249584 6259312 6266330 6272361 6282436 6292668

6295286 6311054 6314166 6324389 6324412 6347218

6363259 6370362 6370389 6377820 6381468 6392660

6400958 6453179 6463278 6470470 6487397 6522670

6198928 4969192 5266782 5390223 5444816 5487084

5640395 5664053 5699482 5701392 5722074 5754976

5805301 5835889 5857151 5859843 5862178 5898925

5930233 5946651 5960354 5960389 5963901 6005857

6011971 6031827 6118775 6128322 6137789 6167248

6170073 6178535 6195338 6199035 6240076 6266321

6285888 6356759 6377803 6430163 6438370 6456237

Nokia 3200 phone at a glance

Power key

Earpiece

Display screen

End key

Scroll up key

Right

selection key

Scroll down key

Number keys

Talk key

Left

selection key

Pound key

Star key

Microphone

•QUICK GUIDE

Action Description

Make a call Enter a phone number, and press the Talk key.

Answer a call Press the Talk key, or select Answer.

Answer call during call Press the Talk key

End a call Press the End key.

Decline a call Press the End key to send the call to voice mail.

Mute a call Select Mute during a call.

Redial Press the Talk key twice.

Adjust call volume Press the Volume key during a call.

Use in-call menu Select Options during a call.

Save name and number Enter a number, press Save, enter a name, and press OK.

Use 1-touch dialing Press and hold a key (2–8). You must assign a key to a number in the

phone book.

Look up a name Select Names > Search.

Check voice mail Press and hold the 1 key (contact your service provider for details).

Write text messages Press Menu > Messages > Text Messages > Write new. Enter the

number and press OK. Press Options > Edit message. Write the

message.

Send text messages Press Options > Send > Select. Note: Message service is dependent

on the service provider

Read new message If New Message appears on the display, select Read, highlight the

message, then select Read again.

Reply to a message Select Options > Reply. Write a reply, and select Options > Send.

Press Press a key briefly and release it.

Press and hold Press a key, hold it for two to three seconds, and release it.

[ vii ]

Contents

Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

1 For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

About your device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Network services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Shared memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

2 Overview of functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

FM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Flashlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Multimedia messaging service (MMS). . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Speakerphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

GPRS and EGPRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

MIDP Java™ applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Polyphonic sound (MIDI). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Advanced multimedia player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Special user interface features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

3 About your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Find information about your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Get help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Start screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Accessibility solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Nokia PC Suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Phone menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

4 Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Install the SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Switch the phone on or off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Set the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

[ viii ]

Make and answer calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Adjust the earpiece volume. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Use the loudspeaker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Call and set up your voice mail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Listen to your voice messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Options during a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5 Text entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Standard mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Predictive text input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Enter punctuation and special characters . . . . . . . . . . . . . . . . . . . . . . . 25

6 Phone security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Keyguard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

PIN code request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Call restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Fixed dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Closed user groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Security levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Access codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

7 Advanced multimedia player . . . . . . . . . . . . . . . . . . . . . . . 33

8 Menu functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Messages (Menu 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Linked messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Before you can send and receive messages. . . . . . . . . . . . . . . . . . . . . . 35

Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Default message type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Font size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Save your message center number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Organize messages with folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Delete messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Message settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Write and send a text message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

[ ix ]

Read messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Reply to a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Forward a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Picture messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Multimedia messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Info message service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Service commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Call log (Menu 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

While viewing calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

View missed calls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

View received calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

View dialed numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

View call times. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Delete call lists. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

View duration of calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Contacts (Menu 3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Contacts menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Types of contact information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Save contact information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Change the default (primary) number . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Search for an entry in contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Make a call from contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Add an image to a name or number . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Edit a contact entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Delete names and numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Copy contact entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Business cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

1-touch dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

View info, service, and own numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Caller groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Select contacts view and memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

[ x ]

Settings (Menu 4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Over the Air (OTA) settings service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Tone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Time and date settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Personal shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Phone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Enhancement settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Security settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Restore factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Gallery (Menu 5). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Folders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Folder items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Edit an image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Media (Menu 6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Voice recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Organizer (Menu 7). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Alarm clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Applications (Menu 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Services (Menu 9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Set up for browsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Sign on to the mobile Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Navigate the mobile Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

[ xi ]

Examples of mobile Internet sites . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Bookmarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Service inbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103

File upload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Disconnect from the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Set up an automatic connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Receive a call while online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Make a call while online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

Make an emergency call while online . . . . . . . . . . . . . . . . . . . . . . . . . .105

Options while online . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Allow or reject cookies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

Create a digital signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

Appearance settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Instant messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Network selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Obtain user name and password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Log into service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Set your availability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Instant messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Chat Sessions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

Private groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

Instant messaging settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Log off service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

Go to (Menu 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

SIM services (Menu 11) . . . . . . . . . . . . . . . . . . . . . . . . . . 119

9 Hardware and enhancements . . . . . . . . . . . . . . . . . . . . . .120

Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

10 Reference information . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

Battery information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

[ xii ]

Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

Enhancements, Batteries, and Chargers. . . . . . . . . . . . . . . . . . . . . . . . 125

CARE AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

ADDITIONAL SAFETY INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . 126

11 Technical information . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

12 Nokia one-year limited warranty . . . . . . . . . . . . . . . . . . . 132

Appendix A Message from the CTIA. . . . . . . . . . . . . . . . . 137

Appendix B Message from the FDA . . . . . . . . . . . . . . . . . 141

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

For your safety

1 For your safety

Read these simple guidelines. Not following them may be dangerous or illegal.

Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle

while driving. Your first consideration while driving should be road

safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could

affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in

aircraft.

SWITCH OFF WHEN REFUELING

Don't use the phone at a refueling point. Don't use near fuel or

chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don't use the phone where blasting is in

progress.

USE SENSIBLY

Use only in the normal position as explained in the product

documentation. Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect

incompatible products.

ENHANCEMENTS

Use only approved enhancements. Do not connect incompatible

products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all

important information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed

safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press End as many times

as needed to clear the display and return to the main screen. Enter the

emergency number, then press Send. Give your location. Do not end the

call until given permission to do so.

• ABOUT YOUR DEVICE

The wireless device described in this guide is approved for use on the GSM 850,

900, 1800, and 1900 networks. Contact your service provider for more information

about networks.

When using the features in this device, obey all laws and respect privacy and

legitimate rights of others.

Warning:To use any features in this device, other than the alarm clock, the

phone must be switched on. Do not switch the device on when wireless

phone use may cause interference or danger.

• NETWORK SERVICES

To use the phone you must have service from a wireless service provider. Many of

the features in this device depend on features in the wireless network to function.

These Network Services may not be available on all networks or you may have to

make specific arrangements with your service provider before you can utilize

Network Services. Your service provider may need to give you additional

For your safety

instructions for their use and explain what charges will apply. Some networks may

have limitations that affect how you can use Network Services. For instance, some

networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, they will not appear on your device menu. Contact

your service provider for more information.

• SHARED MEMORY

The following features in this device may share memory: contacts, text and

multimedia messages, images and ringing tones in gallery, calendar, to-do notes,

and Java games and applications. Use of one or more of these features may reduce

the memory available for the remaining features sharing memory. For example,

saving many images may use all of the available memory. Your phone may display

a message that the memory is full when you try to use a shared memory feature.

In this case, delete some of the information or entries stored in the shared memory

features before continuing. Some of the features may have a certain amount of

memory specially allotted to them in addition to the amount of memory shared

with other features.

2 Overview of functions

Note:Certain features use shared memory. See “Shared memory” on page 3

for more information.

•CAMERA

Your phone has a built-in camera. You can use the full-color screen as a camera

viewfinder and the self-timer for a 10-second delay. After you have taken a picture,

you can attach it to a multimedia message and send it with MMS, save it as

wallpaper in standby mode, use it as a thumbnail picture in contacts, save it in a

compatible PC using Nokia PC Suite software, and upload it to a web address with

the content image uploader. When you attach a picture to an entry in your list of

contacts, the picture is displayed when your contact calls you.

See “Camera” on page 84 for more information.

•FM RADIO

Your phone has an FM radio that also functions as a clock radio alarm. You can

listen to the radio through a headset or the handsfree speaker (with the headset

attached).

See “Radio” on page 86 for more information.

• FLASHLIGHT

Your phone has a built-in flashlight that you can activate when the phone is in

standby mode or when there is a call in progress. To activate the flashlight:

Press and hold the Scroll up key. The light stays on until you release the Scroll up

key.

Press the Scroll up key twice in quick succession. The light stays on until you press

the Scroll up key again.

You can also use the flashlight to alert you to an incoming call. See “Customize a

profile” on page 64 for more information.

Overview of functions

• MULTIMEDIA MESSAGING SERVICE (MMS)

Your phone is able to send and receive multimedia messages made up of text and

pictures and to receive messages containing text, a picture, and sound such as

polyphonic ringing tones. You can save pictures and ringing tones to personalize

your phone. In addition, you can easily send text messages and multimedia

messages to multiple recipients.

See “Multimedia messages” on page 47 and “Options” on page 36 for more

information.

• SPEAKERPHONE

You can use your phone as a speakerphone.

See “Use the loudspeaker” on page 20 for more information.

• GPRS AND EGPRS

General packet radio service (GPRS) technology allows mobile phones to send and

receive data over a mobile network. Applications such as browsers, MMS, text

messaging, and JavaTM use GPRS. Your phone supports up to three simultaneous

GPRS connections.

For more information, see “GPRS, EGPRS, HSCSD, CSD” on page 71.

Also, consult the PC Connectivity Guide. The PC Connectivity Guide, Nokia PC Suite,

and all related software can be downloaded from the U.S. Mobile Phone products

section of www.nokia.com.

• MIDP JAVA™ APPLICATIONS

Your phone supports Java 2 Micro Edition, J2METM, and includes some Java

applications and games that have been specially designed for mobile phones.

You may be able to download new applications and games to your phone from a PC

with Java installer software or from some mobile Internet services.

See “Applications (Menu 8)” on page 96 for more information.

• POLYPHONIC SOUND (MIDI)

Polyphonic sounds can be used in ringing tones, gaming sounds, and message alert

tones. They consist of several sound components played at the same time, like an

actual melody through a speaker. Your phone has sound components from over 40

instruments that can be used for polyphonic sounds and the phone can play four

instruments simultaneously. The phone supports scalable polyphonic MIDI

(SP-MIDI) format.

You can receive polyphonic ringing tones using a multimedia service (see “Read and

reply to a multimedia message” on page 49) or download them using the gallery

menu [see “Gallery (Menu 5)” on page 81].

• ADVANCED MULTIMEDIA PLAYER

The built-in multimedia player allows you to view images and play audio and image

animations. The multimedia player is activated by other features, such as the Gallery,

when there are multimedia files to be displayed.

See “Advanced multimedia player” on page 33 for more information.

• BROWSER

The built-in browser can interpret both WAP-based and xHTML-based content.

See “Services (Menu 9)” on page 100 for more information.

• SPECIAL USER INTERFACE FEATURES

You can choose from two types of menu interface: List and Grid.

See “Select menu view” on page 67 for more information.

In the List interface, full color images introduce every

menu. Use the Scroll up and Scroll down keys to

navigate through the menus.

Overview of functions

In the Grid interface, multiple menu icons appear on a

single display. Use all four scroll keys to navigate through

the icons.

With the Go to menu feature, you can create a convenient shortcut menu available

through the Right selection key that lists the functions that you use most often. For

more information about the Go to menu, see “Personal shortcuts” on page 69.

Quick keys from the start screen take you instantly to functions accessed

frequently. See “Quick keys” on page 11 for more information.

3 About your phone

Congratulations on your purchase of the Nokia 3200 mobile phone. Your phone

provides many functions which are practical for daily use, such as a camera, radio,

alarm clock, calculator, calendar, and more. Your phone can also connect to a PC,

laptop, or other device using the data cable or built-in IR port. To personalize your

phone, you can set your favorite ringing tones, program a Go to Menu, and create

custom cut-out covers. For more information on connectivity, refer to the PC

Connectivity Guide. The PC Connectivity Guide, Nokia PC Suite, and all related

software can be downloaded from the U.S. Mobile Phone products section of

www.nokia.com.

• REGISTER YOUR PHONE

Be sure to register your phone at www.warranty.nokiausa.com or call

1-888-NOKIA-2U (1-888-665-4228) so that we can serve you better if you need

to call a customer center or to have your phone repaired.

•TERMS

This guide uses certain terms for the parts of the phone and the steps that you are

asked to perform.

•Highlighted options on the screen are enclosed within a dark bar. The

selection keys are used to act on the highlighted option.

•Scroll keys are used to move up and down in the menus. With some features,

such as the calendar monthly view, text messages, and special characters, you

can move the screen cursor left and right as well as up and down. For example,

if instructed to scroll to another contacts entry, this means press the Scroll up

key or the Scroll down key. In some submenus, not all options are visible at once,

and you may need to scroll up or down to view the full range of options.

•Select means to press the Left selection key or the Right selection key. To

select an option, press the selection key below the menu item on the phone

screen. In the illustration, press the Left selection key to select Inbox, or press

the Right selection key to go back to the previous menu. Some functions

require you to go through several submenus. For example, if this guide says

Select Settings > Tone settings > Ringing tone you would scroll to the

Settings menu and press the Left selection key, then scroll to the Tone

settings option and press the Left selection key, then scroll to the Ringing

tone option and press the Left selection key.

About your phone

• FIND INFORMATION

ABOUT YOUR PHONE

The label on the back of your phone,

underneath the battery, contains the

following information:

• Model number

• Phone type and FCC ID

• Electronic serial number (ESN)

• International Mobile Equipment Identifier (IMEI)

•GET HELP

If you need help, Nokia Customer Care is available for assistance. We recommend

that you write down the following information and have it available if you call.

• The IMEI printed on the back of the phone, beneath the battery

• Your zip code

Contact Nokia

Please have your phone or enhancement with you when contacting any of the

numbers below.

Nokia Customer Care Center, USA Customer Care, Canada

Nokia, Inc.

7725 Woodland Center Boulevard

Suite 150

Tampa, Florida 33614

Tel: 1-888-NOKIA-2U

(1-888-665-4228)

Fax: 1-813-249-9619

TTY: 1-800-24-NOKIA

(1-800-246-6542)

(hearing impaired only)

Nokia Products Ltd.

601 Westney Road South

Ajax, Ontario L1S 4N7

Tel: 1-888-22-NOKIA

(1-888-226-6542)

Fax: 1-905-427-1070

Information

Contact your service provider

To use the network services available in your phone, you will need to sign up with

a service provider. In many cases, the service provider will make available

descriptions of their services and instructions for using features such as:

• Voice mail and voice privacy

• Call waiting, call forwarding, and caller ID

•Messaging

• News and information services

• Selected Internet services

Service providers may differ in their support of features. Before you sign up, make

sure a service provider supports the features that you need.

Guide updates

From time to time, Nokia updates this guide to reflect changes. The latest version

may be available at www.nokia.com.

Online tutorials

An interactive tutorial for this product may be available at the web site

www.nokiahowto.com.

In-phone help

Many features have brief descriptions (help text) which can be viewed on the

display. To view these descriptions, scroll to a feature and wait for about 15

seconds. Select More to view all of the description (if necessary), or select Back to

exit.

To activate or deactivate help text:

1From the menus, select Settings > Phone settings > Help text activation.

2Select On or Off.

A confirmation message appears in the display indicating your selection.

About your phone

• START SCREEN

The start screen is “home base” and indicates that the phone is in standby mode.

HOME—The name of your service provider may appear here.

Signal strength—A higher bar indicates a stronger network signal.

Battery level—A higher bar indicates more power in the battery.

Menu—The Left selection key in standby mode accesses the menu functions.

Contacts—The Right selection key in standby mode accesses either the Contacts

menu, the Go to menu, or a service provider’s home page.

After you set functions for the Right selection key, the word Contacts changes to

Go to in the start screen. To set the functions, see “Personal shortcuts” on page 69.

To activate a function in the Go to menu, select Go to in the start screen, scroll to

the desired function, and select Select.

Quick keys

From the start screen, each scroll key takes you directly to a function:

Scroll up—Activate the flashlight.

Scroll left—Create a message.

Scroll down—Go to your list of contacts.

Scroll right—View the calendar.

Screen saver

The phone automatically activates a digital clock screen saver to save power in

standby mode. Press any key to deactivate the screen saver. For more information,

see “Set screen saver timeout” on page 66.

Battery level

Contacts

Signal strength

Wallpaper

You can set the phone to display a background picture (wallpaper) when it is in

standby mode. See “Wallpaper” on page 65.

Indicators and icons

Icon Indicates...

You have one or more text or picture messages. See “Receive a

message or e-mail” on page 46.

You have one or more multimedia messages. See “Read and reply to a

multimedia message” on page 49.

You have one or more voice messages. See “Voice messages” on

page 50.

Your phone keypad is locked. See “Lock the keypad” on page 26.

Your phone is set to the Silent profile. See “Profiles” on page 64.

The alarm clock is set to On. See “Alarm clock” on page 89.

A GPRS dial-up connection is established. See “GPRS dial-up

connection” on page 71.

You have an incoming or outgoing call during a GPRS dial-up

connection. GPRS is suspended.

IR connection indicator. See “Infrared” on page 70.

Forward all voice calls. All calls are forwarded to another number. If

you have two phone lines, the indicator for line 1 is and for line

2 .

If you have two phone lines, this indicates that you are on the second

phone line. See “Phone settings” on page 76.

Integrated handsfree is active. See “Speakerphone” on page 5.

Calls are limited to a closed user group. See “Closed user groups” on

page 29.

The timed profile is selected. See “Profiles” on page 64.

, or A headset, handsfree, or loopset enhancement is connected to the

phone.

or Voice privacy encryption is active (or is not active) in the network.

About your phone

• COPYRIGHT PROTECTION

from being copied, modified, transferred or forwarded.

• ACCESSIBILITY SOLUTIONS

Nokia is committed to making mobile phones easy to use for all individuals. For more

information about phone features, enhancements, alternate format user guides,

and other Nokia products designed with your needs in mind, visit the web site

www.nokiaaccessibility.com or call 1-888-665-4228.

• NOKIA PC SUITE

Nokia PC Suite 5 is a collection of powerful tools that you can use to manage phone

features and data. For example, with PC Suite you can manage the photos from the

phone camera, create new ringing tones and wallpapers, and create new cut-out

covers from your photos.

PC Suite consists of the following components:

Nokia Content Copier allows you to copy data between two Nokia phones, to back

up phone data to your PC (then restore the data back to your phone), and erase

data from your phone.

Nokia Connection Manager allows you to monitor the serial connection between

your phone and PC and switch to a different type of connection (cable, IR, or

Bluetooth) when copying data from one phone to another.

Nokia Sound Converter allows you to convert General MIDI files for use with MMS

messages and as ringing tones for your phone.

Nokia PC Sync allows you to synchronize contacts, calendar, and to-do list items

between your phone and PIM applications such as Microsoft Outlook and Lotus

Organizer.

Nokia Image Converter allows you to convert and optimize graphics for use in

MMS messages or for creating desktop wallpaper for your phone.

Nokia Phone Editor allows you to edit contacts and settings from your PC.

Nokia Application Installer allows you to install Java applications from your PC to

your phone.

Nokia Phone Browser allows you to browse the contents of your phone using

Windows Explorer or My Computer.

Refer to the Nokia PC Suite Connectivity Guide for installation and setup instructions.

PC Suite software and documentation for the Nokia 3200 can be downloaded from

the U.S. Mobile Phone products section of www.nokia.com.

•PHONE MENUS

Phone features are grouped according to function and are accessed through the

main menus of your phone. Each main menu contains submenus and lists from

which you can select or view items and customize phone features. You can access

these menus and submenus

by using the scroll method or by using a shortcut.

Note:Some features may not be available, depending on your network. For

more information, contact your service provider.

Scroll method

1At the start screen, select Menu.

2In the List view, scroll through the main menus one at a time using the Scroll

up key and the Scroll down key.

In the Grid view, use all four scroll keys to navigate through the main menu

icons.

As you scroll through the menus, the menu number

appears in the upper right corner of the display.

Below the menu number is a scroll bar with a tab.

The tab moves up or down as you scroll through the

menus, providing a visual representation of your current position in the menu

structure.

In addition, in the Grid view, the icon for the

selected menu is outlined, and the name of the

menu appears at the top of the display.

3When the desired menu is highlighted, press the

Left selection key.

4If the menu contains submenus, use the scroll keys to highlight the desired

menu, then press the Left selection key.

• Select Back (press the Right selection key) to return to the previous menu or

submenu.

•Press the End key to return to the start screen from any main menu.

Shortcuts

You can go directly to almost any menu or submenu, as well as activate most

features by using a shortcut.

Select Menu, then within 3 seconds, press the key or keys associated with the

menu function you would like to view or activate.

About your phone

For example, to select the Meeting profile, select Menu 4-3-1 (Menu > Profiles >

Meeting > Select) from the start screen. After a brief pause, the Meeting profile

is activated.

4 Basic operations

• INSTALL THE SIM CARD

The SIM card and its contacts can easily be damaged by scratches or bending, so

be careful when handling, inserting, or removing the card.

Keep all SIM cards out of the reach of small children. For availability and

information on using SIM card services, contact your SIM card vendor. This may be

the service provider, network operator, or other vendor.

Always switch the device off and disconnect the charger before removing the

battery.

REMOVE THE BACK COVER

1With the back of the phone facing you,

push the back cover release button

toward the top of the phone.

2Lift the cover from the phone.

REMOVE THE BATTERY

3Remove the battery by lifting it from the

finger grip.

INSERT THE SIM CARD

4Slide the SIM card holder backwards to

release it.

5Swing the SIM card holder open.

Basic operations

6Insert the SIM card into the SIM card holder

with the beveled corner to the top left and the

gold contact area facing down.

7Close the SIM card holder.

8Slide the SIM card holder toward the top end of

the phone until it locks into place.

REPLACE THE BATTERY

The SIM card must be installed before installing the battery.

9Position the battery so the gold contacts

match up with those on the phone.

The battery label should be facing up.

10 Insert the battery, contact end first into the

battery slot.

11 Snap the other end of the battery into place.

REPLACE THE BACK COVER

12 Slide the back cover just below its locked

position on the back of the phone.

13 Slide the back cover forward to lock the

cover into place.

• SWITCH THE PHONE ON OR OFF

Warning:Do not switch the phone on when

wireless phone use is prohibited or when it may

cause interference or danger.

1To turn your phone on or off, press and hold the power

key on top of the phone for at least 3 seconds.

If the phone displays Insert SIM card even though the

SIM card is properly inserted, or SIM card not

supported, contact your service provider.

2If the phone asks for a PIN code, enter the PIN code

(displayed as ****) and select OK.

See “PIN code request” on page 26 for more information.

3If the phone asks for a security code, enter the security code and select OK.

See “Security code” on page 30 for more information.

Note:If the language that appears in your display is not correct, see “Set

the display language” on page 76 for information on changing the display

language.

Antenna

Your device has an internal antenna.

Note:As with any other radio

transmitting device, do not touch the

antenna unnecessarily when the

device is switched on. Contact with

the antenna affects call quality and

may cause the phone to operate at a

higher power level than otherwise needed.

Avoiding contact with the antenna area when

operating the phone optimizes the antenna

performance and the battery life.

• SET THE CLOCK

Before many functions such as call timers will operate properly, you need to set the

clock.

1From the menus, select Settings > Time and date settings > Clock > Set the

time.

2Enter the time in hh:mm format, and select OK.

Basic operations

3Select am or pm.

The time is set.

• MAKE AND ANSWER CALLS

Use the keypad

1Enter the phone number (including the area code), and press the Talk key.

To delete a character to the left of the cursor, select Clear.

2To end the call or to cancel the call attempt, press the End key.

Use contacts

1At the start screen, press the Scroll down key and scroll to the entry you wish

to view.

To search the list of entries quickly, press any key in which the letters match

the first letter of the name for which you are searching.

2Press the Talk key to make the call or select Details to view details of the entry.

Redial a number

1At the start screen, press the Talk key to display the last 20 numbers you have

dialed.

2Press the Talk key to redial the last number, or scroll to the number (or name)

you wish to redial and press the Talk key.

Make an international call

1Press the Star key twice for the international prefix.

A plus (+) sign replaces the international access code.

2Enter the country code, the area code without a leading zero (if necessary),

and the phone number.

Make a conference call

Conference calling is a network service that allows up to six persons to take part

in a conference call.

1Make a call to the first participant.

2To call a new participant, select Options > New call.

3Enter the phone number of the new participant (or select Find to retrieve a

number from contacts) and select Call.

The first call is put on hold.

4When the new call picks up, select Options > Conference to connect the calls.

5To add a new participant to the call, repeat steps 2–4.

6To have a private conversation with one participant, select Options > Private,

and select the desired participant. Rejoin the conference call as described in

step 4.

7To end the conference call, press the End key.

Answer or reject an incoming call

•Press the Talk key to answer the call.

•Press the End key to reject the call.

•If Forward if busy is activated to your voice mailbox, the call is diverted to

your voice mail. If not, the call is rejected.

• If you select Silence, only the ringing tone is muted. You can then either

answer or reject the incoming call.

• If the HDB-4 or HDS-3 headset is connected, you can answer or end a call by

pressing the key on the headset.

Answer a call with the keypad locked

To answer a call with Keyguard on, simply press the Talk key. During the call, all

features function as normal. When you end or reject the call, the keypad

automatically relocks.

When Keyguard is on, calls still may be possible to the official emergency number

programmed into your phone. Enter the emergency number and press the Talk key.

• ADJUST THE EARPIECE VOLUME

• To increase the volume of a call, press the Right scroll key.

• To decrease the volume of a call, press the Left scroll key.

• When adjusting the volume, a bar chart appears in the display indicating the

volume level.

You can also set the phone to adjust the earpiece volume automatically. See

“Automatic volume control” on page 73 for more information.

• USE THE LOUDSPEAKER

You can use your phone as a loudspeaker during a call. Do not hold the phone to

your ear during the loudspeaker operation as the volume may be very high.

• To activate the loudspeaker, select Options > Loudspeaker.

• To deactivate the loudspeaker during a call, select Options > Handset.

• The loudspeaker is deactivated automatically when a call (or a call attempt)

ends or when certain enhancements are connected.

Note:When you select the New call option from the in-call menu, the

loudspeaker does not automatically deactivate.

Basic operations

• CALL AND SET UP YOUR VOICE MAIL

1After you save your voice mailbox number (see “Save your voice mailbox

number” on page 50), press and hold the 1 key.

2When you connect and the prerecorded greeting begins, follow the automated

instructions to set up your voice mail.

• LISTEN TO YOUR VOICE MESSAGES

1After you have set up voice mail, you can dial the number one of three ways:

• Dial the number using the keypad.

• Press and hold the 1 key.

• Select Listen if there is a notification message in the display.

2When you connect and the prerecorded greeting begins, follow the automated

instructions to listen to your voice messages.

• OPTIONS DURING A CALL

Many of the options that you can use during a call are network services. During a

call, select Options, then select one of the following:

Mute—Mute your voice; you can hear the other party but they cannot hear you.

Unmute—Return to normal from mute status.

End call—End the call.

End all calls—End all calls within a conference call.

Contacts—Open the contacts menu.

Menu—Display the main menus.

Hold—Place the current call on hold.

Unhold—Remove the current call from hold status.

Lock keypad—Lock the keypad to prevent an accidental key press.

New call—Place a new call; the first call is put on hold.

Conference—Call another party and invite them into the call.

Private—Have a private conversation with one participant in a conference call.

Answer—Answer another incoming call.

Reject—Reject a call; the calling party receives a busy signal.

Loudspeaker—Enable the handsfree feature in your phone.

Handset—Disable handsfree and return to normal use (earpiece).

Touch tones—Send touch tones generated by your phone keypad.

Swap—Switch between the active call and the call on hold.

Transfer—Connect a call on hold to an active call, and disconnect yourself from the

calls.

Headset or Handsfree—Switch the active call to a compatible accessory when the

accessory is connected to the phone.

Record—Make an audio recording of the call. (See “Voice recorder” on page 87 for

more information.)

Auto volume on or Auto volume off—Set the automatic volume control on or off

(See “Automatic volume control” on page 73 for more information.)

Text entry

5 Text entry

You can use two methods for entering text and numbers.

•Standard mode is the only way to enter names into contacts and to rename

caller groups.

•Predictive text input is a quick and easy method for writing messages.

Press the Pound key to switch predictive text on or off and to use predictive text in

various modes. Press and hold the Pound key to switch between text and numeric

entry. As you press the Pound key, the following icons (not the descriptions) appear

in the upper left of the display:

• STANDARD MODE

Enter text (Abc)

• Press a key once to insert the first letter on the key, twice for the second letter,

etc. If you pause briefly, the last letter in the display is accepted and your

phone awaits the next entry.

• Select Clear to backspace the cursor and delete a character.

• Select and hold Clear to backspace continuously and delete characters.

•Press the 0 key to enter a space and accept a completed word.

•Press the 1 key to enter a period (.).

• Press the Star key to display special characters. See “Enter punctuation and

special characters” on page 25.

Enter numbers (123)

To switch to 123 mode from Abc mode, press and hold the Pound key at any

message entry screen until the icon in the upper left corner of the display switches

from Abc to 123 (or vice versa).

Icon Indicates...

Uppercase text. Predictive text is Off.

Lowercase text. Predictive text is Off.

Sentence case text. Predictive text is Off.

Sentence case text. Predictive text is On.

Lowercase text. Predictive text is On.

•PREDICTIVE TEXT INPUT

Predictive text input allows you to write messages quickly using your keypad and

the built-in phone dictionary. It is much faster than using the standard mode

“multi-tap” method. You can use predictive text to write a message, or create a

calendar note.

Note:When predictive text is on, the icon appears in the upper left

corner of the display. When predictive text is off, the icon appears in

the upper left corner of the display.

Activate predictive text

1At any text entry screen, select and hold Options.

At a text entry screen, select Options > Predictive text.

2Select the language of your choice.

A confirmation message shows that predictive text is turned on.

Enter text

• For each letter of the word that you want to spell, press the corresponding key

on your keypad only once, even if the letter you want is not the first letter on

the key. The phone predicts the word you are trying to spell.

• If a displayed word is not correct, press the Star key to see other matches. To

move forward through a list of matches, keep pressing the Star key. To return

to the previous word in the list of matches, select Previous.

•Press the 0 key to accept the word, enter a space, and begin writing the next

word.

•If ? appears after a word, select Spell to add the word to the dictionary. See

“Add new words to the dictionary” on page 24.

•Press the 1 key to insert a period into your message.

• Press and hold the Star key to display special characters. See “Enter

punctuation and special characters” on page 25.

Compound words

Enter the first part of the word and confirm it by pressing the Scroll right key. Enter

the last part of the word and confirm it by pressing the 0 key.

Add new words to the dictionary

If you encounter a word that predictive text does not recognize, a question mark

(?) follows the word and Spell appears in the lower left of the display.

Text entry

Select Spell, enter your new word using the keypad, and select Save. The word is

added to the dictionary and to the message that you are writing.

Keep these factors in mind when adding words:

• New words that you accept by selecting Save, the 0 key, or deleting the space

between two words are saved to the dictionary.

• Depending on the language and the length of the words, you may be able to

add hundreds of words to the dictionary.

• When the dictionary is full, the most recent addition replaces the first.

Predictive text example

To write Nokia with predictive text on and with the English dictionary selected,

press each of the following keys once:

the 6 key the 6 key the 5 key the 4 key the 2 key

The illustration above simulates your display each time a key is pressed.

• ENTER PUNCTUATION AND SPECIAL

CHARACTERS

While at any text entry screen, press the Star key to display special characters

(press and hold the Star key if predictive text is on).

Navigate through the list of special characters by using the four-way scroll keys

like a joystick. Once a character is highlighted, select Insert to insert the character

into your message.

6 Phone security

An array of security features prevents accidental calls, allows you to restrict the

calls your phone can make and receive, and keeps your stored information safe.

• KEYGUARD

With Keyguard, you can lock the keypad to prevent keys from being pressed

accidentally.

If the keypad is locked, it unlocks when you receive a call. After the call, the lock

automatically reactivates.

Lock the keypad

1Select Menu with the Left selection key.

2Press the Star key.

Unlock the keypad

1Select Unlock with the Left selection key.

2Press the Star key.

When the Keyguard is on, calls still may be possible to the official emergency

number programmed into your phone. Enter the emergency number and press the

Talk key.

• PIN CODE REQUEST

The PIN code protects the SIM card from unauthorized access. The PIN code can be

4–8 digits in length. After three successive incorrect entries the PIN code is blocked

and you will be asked to enter the personal unblocking key (PUK) code.

Note:The PIN code must be obtained from your service provider. The PIN

code is typically provided with your SIM card.

Enable your phone to request the PIN code upon power-up. This provides extra

security in case your phone is lost or stolen.

1From the menus, select Settings > Security settings > PIN code request.

After a brief pause, you are prompted to enter the current PIN code.

2Enter the PIN code and select OK.

3Scroll to On and select OK.

A message appears in the display confirming your selection.

Phone security

• CALL RESTRICTIONS

This network service lets you restrict the calls your phone can make and receive.

Check with your service provider for details.

When calls are restricted, calls still may be possible to the official emergency number

programmed into your phone.

Turn on call restrictions

1From the menus select Settings > Security settings > Call restrictions.

2Select the type of calls you want to restrict. The options are:

Outgoing calls—Calls cannot be made.

International calls—Calls cannot be made to foreign countries.

International except to home country—When abroad, calls can be made only

within the current country and to your home country (that is, the country

where your home network operator is located).

Incoming calls—Calls cannot be received.

Incoming calls if roaming—Calls cannot be received outside your home area.

Cancel all call restrictions—Turns off all call restrictions. Calls can be made

and received in the usual way.

Note:If you selected Cancel all call restrictions, the following steps are

not available. Also, you can cancel call restrictions on each option,

allowing restrictions on other options to stay in force.

3Scroll to one of the following options:

Activate—Enter the restriction password and select OK.

Cancel—Enter the restriction password and select OK.

Check status—The phone lists the call types with call restriction active.

4Select OK.

Change your restriction password

Contact your service provider for your original restriction password.

1From the menus, select Settings > Security settings > Access codes >

Change restriction password.

2Enter your new password, then select OK.

• FIXED DIALING

Once you set up and activate a fixed dialing list, your phone can make calls only to

those numbers that you have defined in the fixed dialing list. Fixed dialing is a

Network Service and must be supported by your service provider.

When fixed dialing is activated, calls still may be possible to the official emergency

number programmed into your phone.

Set up and activate a fixed dialing list

1From the menus, select Settings > Security Settings > Fixed dialing.

After a brief pause, the following options appear in the display.

On—Activate fixed dialing.

Off—Deactivate fixed dialing.

Number list—View the numbers in your fixed dialing list.

Note:If you activate fixed dialing and the number list is empty, all

outgoing calls, except for emergency numbers such as 911, require entry of

the PIN2 code.

2Select Number list.

Fixed dialing not active and then Fixed dialing list empty appear in the

display.

You are prompted to enter the PIN2 code.

3Enter the PIN2 code and select OK.

4Enter the fixed dialing number, or select Find to retrieve a number from

contacts and select OK.

5Enter a name for the number and select OK.

A confirmation note appears in the display and you are returned to the fixed

dialing number list.

6Select Back > On to activate fixed dialing.

View or edit the fixed dialing list

1From the menus, select Settings > Security Settings > Fixed dialing >

Number list.

You are prompted to enter the PIN2 code.

2Enter the PIN2 code and select OK.

Any numbers which you have assigned to fixed dialing appear in the display.

3Scroll to a number and select Options.

The following options appear in the display.

View number—View the number for an entry.

Phone security

Add—Add a number to your fixed dialing list.

Edit—Edit the highlighted entry.

Delete—Delete the highlighted entry.

Delete all—Delete all entries in your fixed dialing list.

4Select the desired option.

Notes about fixed dialing

• If a SIM card with fixed dialing that is activated is inserted into a phone that

does not support fixed dialing, the SIM card is rejected.

• If you try to add a name without a number to the fixed dialing list, you will

receive an error message.

• If you try to browse the fixed dialing list but have not stored any numbers,

Fixed dialing list empty appears in the display.

• You cannot access SIM memory manually (view or copy numbers on the SIM

card) while fixed dialing is active.

• CLOSED USER GROUPS

This network service specifies the group of people whom you can call and who can

call you. Default resets the phone to use a user group that the SIM card owner has

agreed upon with the service provider.

When calls are limited to closed user groups, calls still may be possible to the

official emergency number programmed into your phone.

Turn on closed user groups

1From the menus, select Settings > Security settings > Closed user group >

On.

2Enter the group number, then select OK.

Turn off closed user groups

From the menus, select Settings > Security settings > Closed user group > Off.

• SECURITY LEVELS

The security level determines your access to features when a nonowner SIM card is

used. A nonowner SIM card is one (other than the original) that is inserted after you

power off the phone. There are three security levels:

Off—Owner and Nonowner cards are treated the same.

Memory—Nonowner cards can access SIM memory. Any changes to the memory

setting requires the security code.

The owner card has access to all features, but the security code is required to

change a memory setting.

Phone—The security code is required upon power-up.

Use this procedure to set your security level.

1From the menus, select Settings > Security settings > Security level.

After a brief pause, you are prompted to enter the security code.

The default code is 12345.

2Enter the security code and select OK.

3Select Off, Memory, or Phone.

A message appears in the display confirming your selection

• ACCESS CODES

With the following access codes, you can keep your information safe:

• Security code (4–8 digits)

• PIN code and PIN2 code (4–8 digits)

• PUK code and PUK2 code (8 digits)

• Call barring password (4 digits)

Note:Avoid using codes similar to emergency numbers such as 911 to

prevent accidental dialing of the emergency number.

Security code

The security code controls access to features such as the security level and is

supplied with the phone. The preset code is 12345.

Note:If you enter the wrong security code five times in succession, you will

not be able to enter a code for five minutes, even if you power off the

phone between incorrect entries.

Once you change the security code from its preset of 12345, keep the new code

secret and in a safe place separate from your phone. Use this procedure to change

your security code.

1From the menus, select Settings > Security settings > Access codes > Change

security code.

After a brief pause, you are prompted to enter the current security code

(default is 12345).

2Enter the current security code and select OK.

You are prompted to enter the new security code.

Phone security

3Enter the new security code (up to 10 characters) and select OK.

You are prompted to reenter the new security code for verification.

4Enter the new security code again and select OK.

A message appears in the display confirming your security code has been

changed.

PIN code

Before you can change your PIN code, you need to enable PIN code request. See

“PIN code request” on page 26.

1From the menus, select Settings > Security settings > Access codes >

Change PIN code.

After a brief pause, you are prompted to enter the current PIN code.

2Enter the PIN code and select OK.

You are prompted to enter the new PIN code.

3Enter the new PIN code and select OK.

You are prompted to reenter the new PIN code for verification.

4Enter the new PIN code and select OK.

A message appears in the display confirming your PIN code has

been changed.

PIN2 Code

The PIN2 code is required for features such as Fixed dialing. If you enter an

incorrect PIN2 code three times in succession, the PIN2 code is blocked and you

will have to enter the PUK2 code.

Note:The original PIN2 code must be obtained from your service provider.

Use this procedure to change your PIN2 code.

1From the menus, select Settings > Security settings > Access codes >

Change PIN2 code.

You are prompted to enter the current PIN2 code.

2Enter the current PIN2 code and select OK.

You are prompted to enter the new PIN2 code.

3Enter the new PIN2 code and select OK.

You are asked to verify the new PIN2 code by entering it again.

4Enter the new PIN2 code and select OK.

A message appears in the display confirming you have changed the PIN2 code.

Personal unblocking key (PUK) codes

PUK and PUK2 codes are used to restore blocked PIN and PIN2 codes. Both PUK and

PUK2 codes are eight characters in length and cannot be changed. PUK and PUK2

codes must be obtained from your service provider.

If you enter an incorrect PUK or PUK2 code 10 times in succession, SIM rejected

appears in the display and the SIM card can no longer be used. You must contact

your service provider for a new SIM card.

Advanced multimedia player

7 Advanced multimedia player

The advanced multimedia player gives you a wide array of options for handling

image, audio, and image animation files. There is no menu item for the multimedia

player. It is activated automatically whenever

you use a function, such as the gallery or the camera, that handles multimedia files.

The multimedia player lets you:

• Send, receive, and save many types of multimedia files (see “Multimedia

messages” on page 47).

• Play, pause, mute, and unmute audio files [see “Gallery (Menu 5)” on page 81].

• Set an audio file as your ringing tone [see “Gallery (Menu 5)” on page 81].

• View image files such as photos and clip art [see “Gallery (Menu 5)” on

page 81].

• Zoom in on an image file [see “Gallery (Menu 5)” on page 81].

• Sequentially view all image files in a folder as a slide show [see “Gallery (Menu

5)” on page 81].

• Sequentially play all tone files in a folder [see “Gallery (Menu 5)” on page 81].

• Set an image file as your wallpaper (see “Wallpaper” on page 65).

• Adjust contrast in an image file [see “Gallery (Menu 5)” on page 81].

• Edit image files by adding frames, text, and clip art (see “Edit an image” on

page 82).

• Play, pause, and restart image animation files [see “Gallery (Menu 5)” on

page 81].

8 Menu functions

This section describes the following menus on your phone:

• Messages (Menu 1)

• Call log (Menu 2)

• Contacts (Menu 3)

• Settings (Menu 4)

• Gallery (Menu 5)

• Media (Menu 6)

• Organizer (Menu 7)

• Applications (Menu 8)

• Services (Menu 9)

•IM

• Go to (Menu 10)

• SIM services (Menu 11)

Menu functions

Messages (Menu 1)

If you have subscribed to a message service, you can send and

receive messages to compatible phones that are also subscribed to a message

service. You can also send and receive picture messages, multimedia messages, and

e-mail if supported by your network. Standard text messages can be up to 160

characters in length. See “Text entry” on page 23 for more information.

Note:When your phone is dedicated to a call in progress, a Java application

(such as a game), or an active browser connection, then the phone cannot

receive multimedia messages.

• LINKED MESSAGES

Your device supports the sending of text messages beyond the normal

160-character limit. If your message exceeds 160 characters, it will be sent as a

series of two or more messages. In the navigation bar, you can see the message

length indicator counting backwards from 160. For example, 10 (2) means that you

can still add 10 characters for the text to be sent as two messages.

Using special (Unicode) characters, such as ë, â, á, ì, takes up more space. If there

are special characters in your message, the indicator may not show the message

length correctly. Before the message is sent, the device tells you if the message

exceeds the maximum length allowed for one message. You can cancel sending by

pressing Cancel or you can save the message in the inbox.

While receiving linked messages, you can start reading the first part before the

phone has received the entire message. While viewing a linked message, you can

start reading the first part before the phone has received the entire message. While

viewing the message, you may see *some text missing* on the display. This is

normal, and the message content will be updated as soon as the missing sequence

arrives.

If the memory is full, you may have to delete a message from your inbox or outbox

before your phone can update the missing text. See “Delete messages” on page 39

for more information.

• BEFORE YOU CAN SEND AND RECEIVE

MESSAGES

You will need the following to send and receive messages:

• A messaging service through your service provider

• A message center number, which must be saved to your phone (if your service

provider has not done so already). See “Save your message center number” on

page 38.

•ICONS

Icons that precede the title of a message indicate the following:

•OPTIONS

When you create or receive a text or multimedia message, the following options

are available:

Send—Send the message to one recipient.

Sending options—Select Send to many to send the message to one of your fixed

calling groups. Select Sending profile to send the message to one of your

predefined profiles.

Clear text—Erase the text clipboard.

Save message—Select Archive to save the message in your archive. Select

Templates to save the message as one of your predefined templates.

Insert contact—Insert a name from contacts into your message.

Insert number—Insert a number from contacts into your message.

Use template—Insert a predefined template into your message.

Insert picture—Insert a picture from the gallery into your message.

Exit editor—Save the message to your archive automatically and leave the

message editor.

The message has not been read.

The message has been read.

The message which you have composed has not been sent.

The message which you have composed has been sent.

iThe message is a delivery report.

The message is a MMS (multimedia message).

Menu functions

Insert word—Enter a word and insert it into your message.

Insert symbol—Insert a special character into your message.

Predictive text—Start the predictive text utility.

When you view a text, picture, or multimedia message, or e-mail, some or all of the

following options are available:

Delete—Delete the message you are viewing.

Reply—Reply to the message; you have the option to include the original text in

the reply, a template, or empty screen.

Use detail—Extract numbers, e-mail addresses and website addresses from the

current message.

Forward—Forward the message to another recipient.

Edit—Edit the message.

Move—Move the message to a folder you specify.

Rename—Rename the message before it is saved to a folder.

Copy to Calendar—Copy text from the beginning of the message to your phone’s

calendar as a memo for the current day.

Message details—View the sender’s name and phone number, the message center

used, reception date and time.

• DEFAULT MESSAGE TYPE

You can choose the type of message sent by your phone. Types include Text,

E-mail, Page, and Fax. The default message type is Text.

Note:This feature must be supported by your service provider.

1From the menus, select Messages > Message settings > Text messages >

Sending profile > Default profile > Messages sent as.

2Select the message type of your choice.

A message appears in the display confirming your selection.

• FONT SIZE

1From the menus, select Messages > Message settings > Other settings >

Font size.

2Select either Small font or Large font.

A message appears in the display confirming your selection.

• SAVE YOUR MESSAGE CENTER NUMBER

Messages sent by your phone are routed through your service provider’s message

center. Normally, this number is saved to your phone by your service provider. To

save the number manually, do the following:

1From the menus, select Messages > Message settings > Text messages >

Sending profile > Default profile > Message center number.

2If the box in the display is empty or contains an incorrect number, enter the

number given by your service provider and select OK.

If the box in the display contains the correct number, select OK.

A message appears in the display confirming your number is saved.

• ORGANIZE MESSAGES WITH FOLDERS

Folders

Inbox—Messages are automatically stored in the inbox after they have been read

or if you select Exit when Message received appears on the start screen.

Sent items—Messages that you send are automatically stored in this folder.

Outbox—Messages that you have created but have not sent are automatically

stored in the outbox.

Archive—Store messages that have been read in the Archive folder.

Templates—Pictures and prewritten templates are stored in the Templates folder.

Preloaded templates can be edited and customized.

My folders—You can create new folders for storing messages.

Save messages to folders

You can save messages to an existing folder or to a folder that you created.

1From the menus, select Messages > Text message > Create message.

2Write your message and select Options > Save message.

3Select either Archive, Templates, or the name of a folder which you created.

The message is saved.

View saved messages

1From the menus, select Messages > Text messages > Inbox.

2Select the folder containing the message you wish to view.

3Once the folder opens, select the message you wish to view.

Menu functions

Move a message to a folder

1While viewing the message, select Options > Move.

2Select the destination folder.

My folders

Keep your messages organized by creating custom folders and saving some of your

messages there.

ADD A FOLDER OF YOUR OWN

1From the menus, select Messages > Text messages > My folders > Options >

Add folder.

2Enter a name for the new folder and select OK.

The folder is added.

REMOVE A FOLDER

Only folders created in My folders can be deleted. The Inbox, Outbox, Archive, and

Template folders are protected. When you delete a folder, all messages in the folder

are also deleted.

1From the menus, select Messages > Text messages > My folders.

Any folders that you have created appear in the display.

2Scroll to the folder you wish to remove and select Options > Delete folder.

You are asked to confirm the deletion.

3Select OK to delete or Back to exit.

• DELETE MESSAGES

If your message memory is full and you have more messages waiting at the

network, blinks in on the start screen. You can do the following to create more

space:

• Read some of the unread messages and then delete them.

• Delete messages from some of your folders.

A single message

To delete a single message, you need to open it first.

1From the menus, select Messages > Text messages.

2Select the folder containing the message you want to delete.

A list of messages, if you have any, appears in the display.

3Select the message you want to delete.

The message opens.

4Select Options > Delete.

You are asked to confirm the erasure.

5Select OK to delete the message or Back to exit.

All messages in a folder

1From the menus, select Messages > Text messages > Delete messages.

2Select the folder containing the messages you want to delete.

You are asked to confirm your erasure.

Warning:If you select All messages, it deletes any messages which have

been read in all of the folders.

3Select OK to empty the folder.

• MESSAGE SETTINGS

Text, picture, and e-mail message settings

Note:Service providers may customize the text message settings interface.

For more details about text message services, contact your service provider.

1From the menus, select Messages > Message Settings > Text messages >

Sending profile.

2If more than one message profile set is supported by your SIM card, select the

set you want to change.

3Select one of the following:

Message center number—Save the phone number of the message center,

which is necessary for sending text messages; obtain this number is from your

service provider.

Messages sent via—Select the message type Text, E-mail, Page, or Fax.

Message validity—Define how long the network attempts to send your

messages before it gives up.

Default recipient number—Save a phone number where messages are sent by

default when this sending profile is used. This option appears when the

Messages sent via setting is Text.

E-mail server—Save the phone number of the e-mail server where messages

are sent by default when this sending profile is used. This option appears when

the Messages sent via setting is E-mail.

Delivery reports—Request the network to send delivery reports on your

messages.

Use GPRS—Set GPRS as the preferred method of sending text messages.

Menu functions

Reply via same center—Allow the recipient of your message to send you a

reply message using your message center (network service).

Rename sending profile—Change the name of the sending profile. (The name

of the default profile cannot be changed.)

4Follow the prompts to change the selected setting.

Overwrite messages

When the message memory is full, your phone cannot send or receive any new

messages. However, you can set your phone to automatically replace old messages

in the Inbox and Sent items folders when new ones arrive.

1From the menus, select Messages > Message settings > Text messages.

2Select either Overwriting in sent items or Overwriting in inbox.

3Select Allowed to replace the old messages with new ones in the Sent items

or Inbox folder, respectively.

Multimedia message settings

1From the menus, select Messages > Message settings > Multimedia msgs.,

then select one of the following:

Save sent messages—Save sent multimedia messages to the Sent items

folder.

Delivery reports—Request the network to send delivery reports on your

messages.

Default slide timing—Set the length of time that each image is displayed

during a slide show.

Allow multimedia reception—Choose Yes, No, or In home network for your

multimedia service. In home network cannot receive multimedia messages

outside the home network.

Incoming multimedia messages—Select Retrieve to receive multimedia

messages, or Reject if you do not wish to receive multimedia messages.

Connection settings—Define connection parameters for multimedia data

transfer.

Allow advertisements—Enable or disable reception of automatic multimedia

advertisements. This setting is not shown if Allow multimedia reception is set

to No.

2Follow the prompts to change the selected setting.

Multimedia connection settings

Contact your service provider for the settings.

From the menus, select Messages > Message settings > Multimedia msgs. >

Connection settings > Edit active multimedia settings, then select each of the

following in turn and enter the settings provided by the service provider.

Settings’ name—Rename the setting to your preference.

Homepage—Enter the homepage where your browser retrieves multimedia

messages and select OK.

Session mode—Select session mode Temporary or Permanent.

Data bearer—Select the data bearer (always GPRS).

Bearer settings—Set each of the following settings for the data bearer:

•GPRS access point—Enter the access point name and select OK.

•IP address—Enter or change the IP address and select OK.

•Authentication type—Select either Normal or Secure.

•User name—Edit or enter your user name and select OK.

•Password—Edit or enter a password and select OK.

Note:You may be able to receive multimedia connection settings as a text

message from your service provider. For more information, contact your

service provider.

Receive multimedia connection settings

You may be able to receive multimedia connection settings as a text message from

your service provider. For more information, contact your service provider.

• WRITE AND SEND A TEXT MESSAGE

Note:This feature uses shared memory. See “Shared memory” on page 3 for

more information.

1From the menus, select Messages > Text messages > Create message.

Press the Scroll left key at the start screen.

2Compose a message using the keypad and select Options > Send.

3Enter the recipient’s phone number, or select Find to retrieve a number from

contacts, and select OK.

Your message is sent.

Menu functions

Note:When sending messages, your device may display the words Message

Sent. This is an indication that the message has been sent by your device

to the message center number programmed into your device. This is not an

indication that the message has been received at the intended destination.

For more details about messaging services, check with your service

provider.

• READ MESSAGES

When you receive a message, your phone beeps and Message received appears in

the display as well as the unopened letter icon ( ).

1Select Show to read the message or Exit to move it to your inbox.

Note:When you have unopened messages in your inbox, is shown in

the upper left corner of the start screen as a reminder.

2Use the scroll keys (the Scroll up key or the Scroll down key) to view the

whole message if necessary.

3Keep scrolling to view other information, such as the sender number and time

the message was sent.

4Select Back to move the message to the Inbox, or select Options for other

choices, such as Reply or Forward.

• REPLY TO A MESSAGE

1While viewing a message, select Options > Reply.

2Select a Start reply with option:

• Empty screen

•Original text

•Template

•Yes

•No

•OK

• Thank you

• Congratulations

• Happy birthday

• I love you too

• Hugs and kisses

•Sorry

• Sorry, I’m late

3Compose your reply using the keypad, then select Options > Send.

The reply is sent.

• FORWARD A MESSAGE

1While viewing a message, select Options > Forward.

2Enter the recipient’s phone number, or select Find to retrieve a number from

contacts.

3Select OK.

The message is forwarded.

• PICTURE MESSAGES

Your phone comes with 10 preloaded pictures. You can, however, overwrite any of the

10 pictures that come with your phone. Pictures can be attached to a message and

sent using a text message to compatible phones. Picture messages behave the

same as text messages, but pictures take up more space than text. Pictures are

stored in the Templates folder under Messages > Text messages > Templates.

Note:You cannot send a picture message using e-mail.

Download pictures

Your phone can download pictures, or receive them from compatible phones using

text messaging to use in messages. You can also create pictures and send them to

your phone or other compatible phones using Nokia PC Suite.

Note:This function can be used only if it is supported by your service

provider. Only phones that offer picture message features can receive and

display picture messages. Contact your service provider for details.

Receive a picture message

When you receive a picture message, your phone beeps and Message received

appears in the display as well the message icon ( ).

VIEW A PICTURE MESSAGE

1Select Show to view the picture message, or select Exit to move it to your

inbox.

2If you have more than one picture message, scroll and select the message that

you want to view.

Note:When you have unopened picture messages in your inbox, is

shown in the upper left corner of the start screen as a reminder.

3Use the scroll keys to view the whole picture if necessary.

4Keep scrolling to view other information, such as the sender number and time

Menu functions

the message was sent.

5Once you are finished, select Back to move the picture message to the inbox,

or select Options for other choices, such as Reply or Forward.

SAVE A PICTURE FROM A PICTURE MESSAGE

1Select Options > Save picture.

2Enter a title for the picture and select OK.

Note:If your templates folder is full of pictures, scroll to the picture you

would like to replace and select Select.

Compose and send a picture message

One picture message is equivalent in size to three text messages. When you insert

a picture into a message, you will have enough remaining space for about 121

characters in the message. If you try and insert a picture into a message that is

almost full of text, a beep sounds and you are prompted to delete some text before

proceeding.

1From the menus, select Messages > Text messages > Create message.

2Write a message using the keypad (or enter nothing if you choose to just send

a picture), and select Options.

Note:Insert pictures before adding text. You can then check remaining

space for text in the upper right corner of the display.

3Select Insert picture.

A list of pictures appears in the display.

4Scroll to a picture and select View.

5To insert the picture into your message, select Insert.

To view another picture, select Back, scroll to another picture, and select View.

6To send the picture message, select Options > Send.

7Enter the phone number for your recipient, or select Find to retrieve a number

from contacts, and select OK.

The message is sent.

Note:When sending messages, your device may display the words

“Message Sent.” This is an indication that the message has been sent by

your device to the message center number programmed into your device.

This is not an indication that the message has been received at the

intended destination. For more details about messaging services, check

with your service provider.

Preview, change, or delete a picture message

1After a picture has been inserted into your message, select Options at the

message edit screen.

2Select one of the following options:

Preview—Preview the inserted message before sending. Select Back to return

to the list of options.

Change picture—Go back to the picture list. Scroll to highlight a new picture,

select View and then select Insert to replace the previous picture in your

message.

Delete picture—Select OK to delete the picture from your message, or select

Back to return to the list of options.

•E-MAIL

You can send e-mail up to 160 characters in length (including the e-mail address)

to anyone with an e-mail address. First, you will need to set up an e-mail profile

and modify a few other settings. It takes just a few minutes, and you only need to

do this once. See “Text, picture, and e-mail message settings” on page 40.

Note:You cannot insert pictures into e-mail.

Write and send e-mail

1From the menus, select Messages > Text messages > Create e-mail.

2Enter the e-mail address, or select Find to retrieve an e-mail address from

contacts, and select OK.

3Enter a subject for the e-mail and select OK.

4Compose your e-mail using the keypad and select Options.

Note:Be sure and leave enough space in the total character count (160)

for the e-mail address.

5Select Send e-mail.

Your e-mail is sent.

Note:When sending messages, your device may display the words Message

Sent. This is an indication that the message has been sent by your device

to the message center number programmed into your device. This is not an

indication that the message has been received at the intended destination.

For more details about messaging services, check with your service

provider.

Receive a message or e-mail

When you receive a text message or e-mail,

Message(s) received appears

in the display, where

is the number of new messages.

Menu functions

The blinking indicates that the message memory is full. Before you can receive

new messages, delete some of your old messages. See “Delete messages” on

page 39 for more information.

Select Show to view the message now, or Exit to view it later.

Read the message later

1From the menus, select Messages > Text messages > Inbox.

2If more than one message is received, scroll and select the message you want

to read.

An unread text message is indicated by in front of the message and an

unviewed picture message by .

• MULTIMEDIA MESSAGES

This is a Network Service.

Note:This feature uses shared memory. See “Shared memory” on page 3 for

more information.

Note:Only devices that offer compatible multimedia message or e-mail

features can receive and display multimedia messages. Multimedia

message objects may contain viruses or otherwise be harmful to your

device or PC. Do not open any attachment if you are not sure of the

trustworthiness of the sender.

A multimedia message can contain text, one image, and one sound clip. Your phone

can send and receive multimedia messages that are up to 100 KB. If the maximum

size is exceeded, the phone may not be able to receive the message. Depending

upon your network, you may receive a message that includes an Internet address

where you can go to view the multimedia message. Pictures are scaled to fit the

display area of the phone. Your phone has a multimedia message viewer for playing

messages and a multimedia inbox for storing saved messages. Once you save the

multimedia message, you can use the image as a screen saver or the sound as a

ringing tone.

Multimedia messages cannot be received during a call, while using a game or other

Java application, or when you are in an active browsing session using the GSM data

bearer.

Because delivery of multimedia messages can fail for a variety of reasons, do not

rely solely on them for essential communication.

The default setting of the multimedia message service is on.

The appearance of a multimedia message may vary depending on the receiving

device.

Note:If a received message contains unsupported elements, they may be

replaced with the text Object format not supported.

Before you can use the multimedia message feature, you must define the

multimedia message settings. See “Multimedia message settings” on page 41 for

more information.

Write and send a multimedia message

For availability and subscription to the MMS, contact your service provider.

1From the menus, select Messages > Multimedia msgs. > Create message.

2Enter the text of your message and select Options.

3To insert a picture or a sound clip, select Insert image or Insert sound clip,

respectively.

The list of available folders in the Gallery is shown.

4Open the desired folder, scroll to the picture or sound clip, and select

Options > Insert.

The indicator in the header of the message indicates that a picture or sound

clip has been attached.

content from being copied, modified, transferred, or forwarded.

5To insert a name from contacts, select Options > More options > Insert

contact. Scroll to the desired name and select More options > Insert contact.

6To insert a number, select Options > More options > Insert number. Enter

the number or search for it in contacts, then select OK.

7To add a subject to the message, select Options >More options > Edit

subject. Enter a subject and select OK.

8To view the message before sending it, select Options > Preview.

9To save the message to the Saved items folder, select Options > Save

message.

10 To send the message, select Options, then select Send to number, Send to

e-mail, or Send to many.

Note:If you have attached a picture to the message, you cannot send the

message using e-mail.

11 Enter the recipient’s number or e-mail address, or search for it in contacts,

then select OK.

The message is moved to the Outbox folder for sending.

Menu functions

Note:It takes more time to send a multimedia message than to send a text

message. While the multimedia message is being sent, the animated

indicator is displayed and you can use other functions on the phone.

If there is an interruption while the message is being sent, the phone tries

to resend it a few times. If this fails, the message remains in the Outbox

folder and you can try to resend it later. Check your Outbox folder for

unsent messages.

Note:When sending messages, your device may display the words

“Message Sent.” This is an indication that the message has been sent by

your device to the message center number programmed into your device.

This is not an indication that the message has been received at the

intended destination. For more details about messaging services, check

with your service provider.

Read and reply to a multimedia message

When a multimedia message is being received, the animated indicator appears

in the display. Once the message has been fully downloaded, and Multimedia

message received appear in the display.

If the indicator blinks, the memory for multimedia messages is full. You must

delete old messages before you can receive new ones. See “Delete messages” on

page 39.

1To view the message immediately, select Show. To view the message later,

select Exit.

2While viewing the message, select Options, then select one of the following:

Delete message—Delete a saved message.

Reply or Reply to all—Reply to the message. Select Options and then Send.

The sender’s phone number or e-mail is used as the default.

Forward to number—Forward the message to another number.

Forward to e-mail—Forward the message to an e-mail address.

Forward to many—Forward the message to multiple recipients.

Edit—Edit the message. You can only edit messages that you have written.

Message details—View the message subject, size, and class.

Details—View the details of the attached image or sound.

Play—Listen to a sound clip in the message, if one is included.

Mute audio or Unmute audio—Turn audio on or off when listening to a sound

clip.

Zoom—View an image in a larger size.

Save sound clip—Save a ringing tone, if included, to the gallery.

Save image—Save a picture, if included, to the gallery.

from being copied, modified, transferred, or forwarded.

• VOICE MESSAGES

If you subscribe to voice mail, your service provider will furnish you with a voice

mailbox number. You need to save this number to your phone to use voice mail.

When you receive a voice message, your phone lets you know by beeping,

displaying a message, or both. If you receive more than one message, your phone

shows the number of messages received.

Save your voice mailbox number

Your service provider may have already saved your voice mailbox number to your

phone. If so, the number will appear in the display in step 2. Select OK to leave the

number unchanged.

1From the menus, select Messages > Voice messages > Voice mailbox number.

After a brief pause, the Voice mailbox number screen appears.

2If the box is empty, enter the voice mailbox area code and number and select

OK.

The phone confirms that the number has been saved.

Save yourself the trouble of entering the mailbox codes each time you dial voice

mail. See “Automate voice mail” on page 51.

Call and set up your voice mail

1Once you have saved the voice mailbox number, press and hold the 1 key.

2When you connect to voice mail and the prerecorded greeting begins, follow

the service’s automated instructions to setup your voice mail.

Listen to your voice messages

Once you have set up voice mail, you can dial the number in one of

four ways:

• Dial the number using the keypad.

• Press and hold the 1 key.

• Select Listen if there is a notification message in the display.

• From the menus, select Messages > Voice messages > Listen to voice

messages.

Once you connect and the prerecorded greeting begins, follow the automated

instructions to listen to your voice messages.

Menu functions

Automate voice mail

You can insert special characters called dialing codes into phone numbers such as

voice mail and then save the number to a 1-touch dialing location. Dialing codes

instruct the receiving system to pause, wait, bypass, or accept the numbers that

follow them in the dialing string.

Note:Each voice mail service can vary. The examples and steps that follow

are for clarification. Check with your service provider if you have specific

questions about your voice mail service.

WRITE DOWN SOME INFORMATION

You will need this information in “Set up voice mail with dialing codes” on page 51.

Be sure to record all of the information correctly.

1Write down your voice mailbox number.

2Call and check your voice mail as you normally would.

3Write down your interaction with the recorded prompts step-by-step. Keep in

mind that each voice mail service may vary. However, it should look something

like this:

Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press pound key.

INSERT DIALING CODES

Press the Star key repeatedly to cycle through dialing codes. Once the desired code

appears in the display, pause briefly and the code is inserted into the dialing string.

For example, press the Star key four times to display w (wait character). Pause

briefly and the wait character is inserted into the dialing string. Available dialing

codes are as follows:

SET UP VOICE MAIL WITH DIALING CODES

1At the start screen, select Contacts > 1-touch dialing.

2Scroll to an empty 1-touch dialing slot and select Assign.

3Enter your voice mailbox number, including the area code.

4Enter any dialing codes as necessary.

For example, if you pause for 5 seconds after connecting to voice mail, enter

*Bypasses a set of instructions.

+Precedes an international telephone number.

pPauses for 2.5 seconds before sending any numbers that follow.

wWait. Your phone waits for you to press the Talk key before it sends any numbers or

codes that follow.

p twice after the voice mailbox number, such as 2145551212pp.

5Enter any remaining pauses, PIN codes, and other information that allows you

to listen to your messages, then select OK.

6Enter a name (such as Voice Mail) and select OK.

A message appears in the display confirming your 1-touch dialing location has

been saved.

7To dial and listen to your voice mail, select and hold the assigned 1-touch

dialing key at the start screen.

No other keypresses should be necessary to connect and listen to

your messages.

• INFO MESSAGE SERVICE

With the info message network service, you can receive short text messages from

your service provider on various topics, such as weather and traffic conditions.

Contact your service provider for more information.

From the menus, select Messages > Info messages, then select one of the

following:

Info service—Select On or Off to activate or deactivate the service.

Topics—Add, select, edit, and delete info topics.

Language—Select the language in which info messages are received. The language

you select does not affect the language you select under the Phone settings menu.

Info topics saved on SIM card—Select one or more info topics to save to your SIM

card.

Read—Read messages received from your service provider. This option only appears

if info messages have been received.

• SERVICE COMMANDS

Use the Service commands editor to enter and send service requests (also known

as USSD commands) to your service provider. Contact your service provider for

information about specific service commands.

1From the menus, select Messages > Service commands.

2Enter a service request, such as an activation command for a specific network

service, and select Send.

Menu functions

Call log (Menu 2)

Call log stores information about up to the last 10 missed, 10

received, or 10 dialed calls. It also adds the total duration of all calls. When the

number of calls exceed the maximum, the most recent call replaces the oldest.

For Call log to work properly:

• Your service provider must support caller ID, and it must be enabled.

• Your calls cannot be blocked.

• Your phone must be on and within the service area.

Note:Some timers, including the life timer, may be reset during service or

software upgrades.

•OPTIONS

The following options are available from the call log menu:

Missed calls—Show the phone numbers of unanswered incoming calls.

Received calls—Show the phone numbers of the most recently answered incoming

calls.

Dialed numbers—Show the most recently dialed numbers.

Delete recent call lists—Clear phone numbers from recent call lists.

Call timers—View the duration of recent calls and clear the call timers.

Call costs—View and limit the cost of calls, and reset the cost counter.

GPRS data counter—Show the amount of sent and received GPRS and EGPRS data

and reset the counters.

GPRS connection timer—Show the duration of GPRS and EGPRS data connections

and reset the timers.

• WHILE VIEWING CALLS

Whether you are viewing missed, received, or dialed calls, the menu options are the

following:

Call time—Display the date and time of the call.

Send message—Send a message to the number.

View number—Display the number.

Edit number—Edit the number and associate a name with the number.

Save—Enter a name for the number and save it to contacts.

Add to contact—Add the number to an existing entry in contacts, if the number is

not associated with a name.

Delete—Clear the number from memory.

Call—Call the number.

• VIEW MISSED CALLS

Missed calls are calls that were never answered. You can check for missed calls in

two ways:

Note:The missed calls feature does not function while your phone is off or

outside of the service area.

1If # missed call appears in the display, select List.

The phone number appears in the display.

2Select Options, then select the desired option from the list.

See “While viewing calls” on page 53.

1From the menus, select Call log > Missed calls.

2Scroll to a name or number and select Options, then select the desired option

from the list.

See “While viewing calls” on page 53.

• VIEW RECEIVED CALLS

Received calls are calls that have been answered.

1From the menus, select Call log > Received calls.

2Scroll to a name or number and select Options, then select the desired option

from the list.

See “While viewing calls” on page 53.

• VIEW DIALED NUMBERS

You can view dialed numbers in one of two ways:

1At the start screen, press the Talk key.

From the menus, select Call log > Dialed numbers.

2Scroll to a name or number and select Options, then select the desired option

from the list.

Menu functions

See “While viewing calls” on page 53.

• VIEW CALL TIMES

You can receive up to five calls from the same number and view the time each call

occurred. Your clock must be set for this feature to work accurately. See “Set the

clock” on page 18 for instructions on setting your clock.

1While viewing dialed numbers or a missed or received call, select Options >

Call time.

The time that the last call occurred appears in the display.

2Press the Scroll down key to view other call times from this number.

3Select Back to return to the options list.

• DELETE CALL LISTS

To clear any missed, dialed, or received calls from phone memory:

1From the menus, select Call log > Delete recent call lists.

2Select the call type you want to clear— either All, Missed, Received, or Dialed.

• VIEW DURATION OF CALLS

1From the menus, select Call log > Call timers.

2Select one of the following options:

Duration of last call—Show the duration of the last call received.

Duration of received calls—Show the duration of all received calls.

Duration of dialed calls—Show the duration of all dialed calls.

Duration of all calls—Show the duration of all calls (missed, dialed, and

received).

Clear timers—Reset all call timers to zero.

Contacts (Menu 3)

You can save names and phone numbers in the phone memory and

in the SIM card memory. The number of contacts that can be saved depends on

their length, and the number and length of related phone numbers and text items.

The phone supports SIM cards that can save up to 250 names and phone numbers.

Contacts saved in the phone memory use shared memory.

•CONTACTS MENU

From the menus, select Contacts, then select one of the following:

Find—Find a name or select from a list.

Add contact—Add a name to contacts.

Delete—Delete a name and its associated numbers.

Copy—Copy entries from phone memory to SIM and vice versa.

Settings—Set memory in use (phone or SIM), change contacts view, and check the

memory status of your phone and SIM card.

1-touch dialing—Display the list of 1-touch dialing numbers saved to memory.

Info numbers—Display a list of information numbers related to your service

provider (if available).

Service numbers—Display a list of service numbers related to your service provider

(if available).

Own numbers—View the numbers (line 1, line 2, data) in use by your SIM card.

Caller groups—View and edit the properties (such as the ringing tone) for any of

the caller groups.

• TYPES OF CONTACT INFORMATION

Each contact entry can contain one or more of the following types

of information:

General phone number

Mobile phone number

Home phone number

Menu functions

• SAVE CONTACT INFORMATION

You can save names and numbers to phone memory or to SIM memory.

Quickly save a name and number

1At the start screen, enter the phone number you wish to save.

2Select Options > Save.

3Enter a name for the number and select OK.

A confirmation message appears in the display indicating your entry has been

saved.

Quickly save (only) a number

You can save a phone number as a stand-alone entry in contacts.

1At the start screen, enter the number you wish to save.

2Select and hold Options.

A message appears in the display confirming your number is saved.

Save an entry using the contacts menu

1At the start screen, select Contacts > Add contact.

2Enter a name and select OK.

3Enter a number and select OK.

4Select Done to return to the start screen.

Save multiple numbers and text items per entry

For each entry in phone memory, you can save different types of phone numbers

and short text items. (SIM card memory can have only one name and number per

entry.) The first number you save for any entry is automatically set as the default,

or primary number. It is indicated with a frame around the number type indicator.

1Make sure that the memory in use is either Phone or Phone and SIM.

Work phone number

Fax number

E-mail address

Web address

Street address

Note

See “Select contacts view and memory” on page 63.

2At the start screen, press the Scroll down key and scroll to the entry to which

you wish to add a number or text item.

3Select Details > Options.

4Select Add number or Add detail, then select the desired number or text type.

See “Types of contact information” on page 56.

5Enter a number, address, or note, and select OK.

6To change the number or text type, with a contact entry highlighted, select

Options > Change type, then select the desired type.

7Press the End key to return to standby mode.

Save addresses and notes

To save an e-mail address, you will need to add it to an existing entry (name).

1Find the entry (name) in contacts to which you would like to add an address

or note.

2With the entry highlighted, select Details > Options > Add detail.

3Select E-mail address, Web address, Street address, or Note.

4Enter the text for the note or address and select OK.

• CHANGE THE DEFAULT (PRIMARY) NUMBER

1At the start screen, press the Scroll down key, scroll to the entry you want to

change, and select Details.

2Scroll to the number you wish to set as default and select Options > As

primary number.

• SEARCH FOR AN ENTRY IN CONTACTS

1At the start screen, press the Scroll down key to display the contents of

contacts.

2Press the key which corresponds to the first letter of the name for which you

are performing a search.

The icon appears at the bottom of the display to indicate you are

performing a search

3Press the Scroll up key or the Scroll down key to scroll up and down through

names and numbers in the list.

4Select Details to view the details of the selected entry.

5Use the Scroll up and Scroll down keys to scroll through the details of the

entry, if necessary.

Menu functions

• MAKE A CALL FROM CONTACTS

At the start screen, press the Scroll down key, scroll to the entry for the person you

want to call, and press the Talk key.

The phone dials the primary number for the contact.

• ADD AN IMAGE TO A NAME OR NUMBER

You can add an image to a name or number saved in phone memory. The image is

displayed when you receive a call from that phone number.

1At the start screen, press the Scroll down key.

2Scroll to the name or number to which you want to add an image, and select

Details > Options > Add image.

The display shows the list of folders in the Gallery.

3Scroll to a folder that contains images and select Open.

4Scroll to the desired image and select Options > Save to contacts.

A copy of the image is added to the contact.

Note:You can use the phone to take a photo and attach it to the contact.

See “Take a photo” on page 84 for more information.

• EDIT A CONTACT ENTRY

1At the start screen, press the Scroll down key.

2Scroll to the entry that you want to edit and select Details.

3Scroll to the item you want to edit, and select Options.

The list of available options varies according to the type of item selected.

4Select an option and follow the prompts to edit the item.

• DELETE NAMES AND NUMBERS

1At the start screen, select Contacts > Delete.

2To delete individual names and numbers, select One by one.

3Scroll to the entry you wish to delete, select Delete, and select OK to confirm

the deletion.

4To delete the entire contents of contacts, select Delete all, then select either

Phone or SIM card.

5Select Delete, then select OK to confirm.

You are asked to enter the security code.

6Enter the security code and select OK.

• COPY CONTACT ENTRIES

1At the start screen, select Contacts > Copy.

2Select either From phone to SIM card or From SIM card to phone.

The following options appear in the display:

One by one—Selects and copies entries one by one.

All—Copies all entries from the SIM card or phone.

Primary numbers—Copies only primary numbers. This appears only if you

selected From phone to SIM card.

3Select the copy method of your choice.

• If you selected One by one, go to step 4.

• If you selected All or Primary numbers, go to step 6.

4Scroll to the entry you wish to copy and select Copy.

5Select either Keep original or Move original.

Warning:Select Keep original if you are unsure of which copy method to

use. This ensures original entries are merely copied to the new location.

Move original deletes files after copying.

The entry is copied and you are returned to the list of contacts entries.

6If you selected All or Primary numbers in step 3, select Keep original or Move

original.

7Select OK to confirm your choice.

All entries are copied to the selected destination.

8Select Back to return to the list of contacts entries, or press the End key to

return to the start screen.

• BUSINESS CARDS

You can send and receive an entry in contacts using IR or text message, if

supported by your service provider.

Receive a business card using IR

1From the menus, select Connectivity > Infrared to ensure IR is activated.

When you receive the business card, your phone beeps and a message appears

in the display.

2Select Save to save the business card in phone memory, or select Exit and then

OK to discard the business card.

Menu functions

Send a business card

You can send a business card using IR or as a text message to a compatible phone

or other handheld device.

1Highlight an entry from contacts that you wish to send and select Details >

Options > Send bus. card.

2To send the business card using IR, make sure the receiving device is set up to

receive data using its IR port and select Via infrared.

To send the business card as a message, select Via text message.

3Select Primary number or All details.

If you are sending the business card using IR, the phone makes the

IR connection and sends the business card. If you are sending the business card

as a text message, continue to the next step.

4Enter the number for your recipient or select Find to retrieve a number from

contacts.

5Select OK.

The business card is sent.

•1-TOUCH DIALING

You can associate any entry in contacts with a key from 2–9, then dial those entries

by pressing and holding the assigned key.

Assign a key

1At the start screen, select Contacts > 1-touch dialing.

2Scroll to any empty slot and select Assign.

3Enter the number (including the area code) and select OK, or select Find to

retrieve a number from contacts.

4Enter a name for the number and select OK.

If 1-touch dialing is off, the phone displays a prompt asking if you would like

to turn 1-touch dialing on.

5Select Yes to activate 1-touch dialing.

The entry appears in the slot you have assigned.

Make a call

Press and hold the key to which an entry has been assigned. Your phone dials the

entry assigned to the key.

Change numbers

1At the start screen, select Contacts > 1-touch dialing.

2Scroll to the 1-touch dialing entry you wish to change and select Options >

Change.

3Enter the new number, or select Find to retrieve a number from contacts, and

select OK.

4Enter a name for the entry and select OK.

Delete numbers

1At the start screen, select Contacts > 1-touch dialing.

2Scroll to the 1-touch dialing location you wish to delete and select Options >

Delete.

You are asked to confirm the deletion.

3Select OK to delete the key assignment.

• VIEW INFO, SERVICE, AND OWN NUMBERS

Your service provider may have saved the operating number of your phone, as well

as various information and service numbers to your SIM card.

Note:This feature may not be supported by your SIM card. Contact your

service provider for more information.

1At the start screen, select Contacts, then select one of the following number

types:

Info numbers—Contact your service provider to obtain information.

Service numbers—Contact your service provider to obtain service.

Own numbers—Display the operating number, or numbers which have been

assigned to your phone by your service provider.

2To view details of any of the number types in the previous table, select Details

when the number type appears in the display.

• CALLER GROUPS

You can add contacts entries to any of five caller groups, and then assign a unique

ringing tone or graphic to that group. This enables you to identify callers from the

group by their unique ringing tone or graphic. A caller group can be as small as one

person or as large as the contacts list. You can rename caller groups to suit your

preference.

Set caller group options

1At the start screen, select Contacts > Caller groups.

The caller groups available are Family, VIP, Friends, Business, and Other.

Menu functions

2Select a caller group to display the following caller group options:

Rename group—Rename the group to your preference.

Group ringing tone—Set the ringing tone for the group.

Group logo—Turn the graphic for the caller group on or off.

Group members—Add or remove members from the caller group.

3Select a caller group option and follow the prompts to set the option

according to your preference.

Set up a caller group

1Recall a name you want to add to a caller group and select Details > Options >

Caller groups.

2Select the caller group to which you want to add the name.

A confirmation message appears in the display.

• SELECT CONTACTS VIEW AND MEMORY

At the start screen, select Contacts > Settings, then select one of the following

options:

Memory in use—Select the memory you wish to use. Options are Phone, SIM card,

or Phone and SIM combined. With Phone and SIM selected, names and numbers

are saved to phone memory but entries saved to both memories appear in the

display.

Contacts view—Select the Name list, Name and number, or Name

only view.

Memory status—View the amount of phone or SIM memory used

and available.

Settings (Menu 4)

Use this menu to set or change your personal shortcuts, time and

date settings, call settings, phone settings, display settings, tone settings,

enhancement settings, security settings, and to restore factory settings.

• OVER THE AIR (OTA) SETTINGS SERVICE

To use browsers, MMS, GPRS, and other wireless services, you must have the proper

settings on your phone. If you receive the settings directly as an OTA message, then

you need only to save the settings on your phone. For more information about the

availability of the settings, contact your service provider or nearest authorized

Nokia dealer.

•PROFILES

Profiles define how your phone reacts when you receive a call or a message, how

your keypad sounds when you press a key, and more. Ringing options, keypad tones,

and other settings for each of the five available profiles can be left at their default

setting, or customized to suit your needs. Select and customize the most suitable

profile for your situation, such as when you are in a meeting or outdoors. The

profiles available are Normal, Silent, Meeting, Outdoor, and Pager.

Note:Profiles are also available for enhancements such as a headset and

car kit. See “Enhancement settings” on page 78 for more information

about enhancement profiles.

Select a profile

1At the start screen, briefly press the Power key.

2Select a profile from the list.

Customize a profile

You can customize any of the profiles a variety of ways.

1At the start screen, select the Profiles menu.

2Select the profile you want to customize, select Customize, then select one of

the following:

Ringing options—Select the ringing tone style.

Ringing tone—Select the ringing tone for incoming calls.

Ringing volume—Set the volume of your ringing tone.

Vibrating alert—Turn the vibrating alert on or off.

Menu functions

Message alert tone—Select the tone for received messages.

Instant message alert tone—Select the tone for incoming instant messages.

Keypad tones—Set the volume of your keypad tones (or turn them off).

Warning tones—Turn warning and confirmation tones on or off.

Alert for—Define which caller groups the selected profile will accept or

decline. See “Caller groups” on page 62 for more information.

Profile name—Rename the profile (up to 16 characters). You cannot rename

the Normal profile.

Set a timed profile

Timed profiles can be used to prevent missed calls. For example, suppose you attend

an event that requires your phone be set to Silent before the event starts, but you

forget to return it to Normal until long after the event. During this time, you have

missed several calls because the ringing tone was silent. A timed profile can prevent

this by automatically returning your phone to the default profile at a time you

specify.

Note:Timed profiles can be set up to 24 hours in advance.

1At the start screen, select the Profiles menu.

2Select a profile, then select Timed.

3Enter the time for the profile to expire and select OK.

The profile you have set for expiration is now active and appears in the start

screen along with a small clock icon.

• TONE SETTINGS

You can adjust the ringing volume, keypad tones, and more for the active profile.

See “Customize a profile” on page 64.

• DISPLAY SETTINGS

Wallpaper

You can set your phone to display a background picture (wallpaper) on the start

screen. Some pictures are presaved in the Gallery menu. You can also take pictures

with the built-in camera, receive pictures using multimedia messaging, download

them from browser pages or transfer them with PC Suite from your PC and then

save them in the Gallery. Your phone supports JPEG, GIF, BMP, PNG, and WBMP

formats.

SELECT

1From the menus, select Settings > Display settings > Wallpaper > Select

image.

2Scroll to a folder that contains images and select Open.

3Scroll to the image of your choice and select Options > Set as wallpaper.

4If Replace current wallpaper? appears in the display, select OK.

A message appears in the display confirming your selection.

ACTIVATE OR DEACTIVATE

1From the menus, select Settings > Display settings > Wallpaper.

2Select On to activate or Off to deactivate.

Select color scheme

You can change the color of some display components in your phone, such as

indicators and signal bars.

1From the menus, select Settings > Display settings > Color Schemes.

2Select the color scheme of your choice.

A message appears in the display confirming your selection.

Show or hide operator logo

Note:This feature is network-dependent. Contact your service provider for

more information.

You can choose whether the display shows the operator logo when the phone is in

standby mode.

1From the menus, select Settings > Display settings > Operator logo.

2Select On to show the logo, or Off to hide the logo.

A message appears in the display confirming your selection.

Set screen saver timeout

The screen saver is activated when no function of the phone is used after a preset

period of time. Press any key to deactivate the screen saver. The screen saver is also

deactivated when the phone is out of the network coverage area.

You can set your phone to display a screen saver after a preset time or after a

custom time (up to 60 minutes) of your choosing.

1From the menus, select Settings > Display settings > Screen saver timeout.

2Select 2 minutes or 5 minutes.

If you want to set a custom time (up to 60 minutes), select Other, then enter

the custom time and select OK.

Menu functions

A message appears in the display confirming your selection.

Change display brightness

You can change the brightness of the display.

1From the menus, select Settings > Display settings > Display brightness.

After a brief pause, a bar chart appears in the display indicating the current

brightness level.

2Use the Scroll left and Scroll right keys or the side volume keys to adjust the

contrast level to your preference.

3Select OK to accept your settings.

Select menu view

You can select either the List interface or the Grid interface.

1From the menus, select Settings > Display settings > Menu view.

2Select either List or Grid.

• TIME AND DATE SETTINGS

Show or hide the clock

You can display or not display the clock on the start screen.

1From the menus, select Settings > Time and date settings > Clock.

2Select Hide clock or Show clock.

If the clock was previously hidden (not shown on the display), it will now

appear in the upper right corner of the start screen.

If the clock was previously shown in the display, it will now be hidden from

view.

Set the clock

1From the menus, select Settings > Time and date settings > Clock > Set the

time.

2Enter the time in hh:mm format, and select OK.

3Select am or pm.

Change the time format

You can set the time format for am/pm or 24-hour format (military time).

1From the menus, select Settings > Time and date settings > Clock > Time

format.

2Select 24-hour or am/pm.

A message appears in the display confirming your selection.

Show or hide the date

You can display or not display the date on the start screen.

1From the menus, select Settings > Time and date settings > Date.

2Select Hide date or Show date.

If the date was previously hidden (not shown on the display), it will now

appear in the center of the start screen.

If the date was previously shown in the display, it will now be hidden from

view.

Set the date

1From the menus, select Settings > Time and date settings > Date > Set the

date.

2Enter the date and select OK.

The date is set.

Set or change the date format

1From the menus, select Settings > Time and date settings > Date > Date

separator.

2Select the separator of your choice (period, slash, or hyphen).

A message appears in the display confirming your selection.

3Select Date > Date format.

4Select the format of your choice.

A message appears in the display confirming your selection.

Automatic update of date and time

You can set the phone to update the date and time from the network when you

turn the phone on. If the clock in your phone is 30 seconds or more off the network

time, the phone will automatically update to reflect the network time.

This is a Network Service.

1From the menus, select Settings > Time and date settings > Auto-update of

date & time.

2Select one of the following options:

On—Update the time automatically

Confirm first—Request confirmation before updating the time. You can accept

or decline the update.

Off—Do not automatically update the time.

Menu functions

• PERSONAL SHORTCUTS

You can change the function of the Right selection key so that your most

frequently used functions can be quickly accessed from the start screen. This list of

functions is called the Go to menu. You can also select an operator-specific name

for the Right selection key to be displayed in the start screen.

Choose functions

1From the menus, select Settings >Personal shortcuts > Select Go to

options > Select options.

The list of functions is displayed. The list includes phone functions and

bookmarks for Internet sites that you entered into the bookmark list. See

“Bookmarks” on page 102.

2Scroll to the desired function from the list, then select Mark.

A mark appears in the box next to the selected function indicating that you

have selected the function. Select Unmark to remove a function from the list.

3Repeat the previous step to select or remove as many functions as you wish.

4Select Done when you have added all desired functions.

5When Save changes? appears in the display, select Yes.

Organize functions

1From the menus, select Settings > Personal shortcuts > Select Go to

options > Organize.

The list of functions is displayed.

2Scroll to the function you wish to rearrange; then select Move.

3Select Move up, Move down, Move to top, or Move to bottom from the list

of choices.

The list of right selection key functions is displayed in the new order.

4Select Done.

A confirmation message appears.

5Select Yes.

The changes are saved.

Choose a name

1From the menus, select Settings > Personal shortcuts > Right selection key.

2Select either an operator-specific name (if available), Go to, or Contacts.

The selected name will appear over the Right selection key in the start screen.

If you selected Contacts, the Right selection key takes you directly to

contacts. If you selected Go to, the Right selection key takes you to the list of

functions you selected for the Go to menu. If you selected an operator-specific

name, the Right selection key takes you to a list of items specified by your

operator.

•CONNECTIVITY

In this menu you can connect the phone to a compatible device using an IR

connection. You can also define when the phone connects to the (E)GPRS network.

You can make a serial connection between your phone and a PC using the DKU-5

data cable, which is available for purchase as an enhancement. Once you establish

this connection, you can access phone information from your PC, or use your phone

as a wireless modem. It may also be possible to make this same serial connection

between your phone and an IR-equipped laptop or IR-equipped desktop PC using the

IR port.

For more information, see the PC/PDA connectivity guide. This document can be

downloaded from the Nokia website at http://www.nokia.com.

Infrared

You can set up the phone to receive data through its IR port. To use an IR

connection, transmission and reception must be to or from an infrared compatible

phone or device. You can send or receive data such as business cards and calendar

notes to or from a compatible phone or data device (such as a computer) using the

IR port of your phone.

Do not point the IR beam at anyone's eye or allow it to interfere with other IR

devices. This device is a Class 1 laser product.

SEND AND RECEIVE DATA

1Ensure that the IR ports of the sending and receiving devices are pointing at

each other and that there are no obstructions between the devices.

The preferable distance between the two devices in an IR connection is from

3 inches to 3 feet.

2Activate IR in your phone by selecting Settings > Connectivity > Infrared

from the menus.

3The user of the other device should activate IR as well.

If data transfer is not started within two minutes after the activation of the IR port,

the connection is cancelled and must be restarted.

CONNECTION INDICATOR

• When is shown continuously, the IR connection is activated and your

phone is ready to send or receive data using its IR port.

• When blinks, your phone is trying to connect to the other device or a

Menu functions

connection has been lost.

GPRS, EGPRS, HSCSD, CSD

With your phone you can use general packet radio service (GPRS), high-speed

circuit switched data (HSCSD), and circuit switched data (CSD).

With GPRS, you can stay connected to the Internet and allow for faster downloads

without completing a dial-up connection. Applications using GPRS include the

browser, text messaging and dial-up connections for making digital data calls.

Enhanced GPRS (EGPRS), also known as EDGE (enhanced data rates for GSM

evolution) is similar to GPRS but the connection up to 3 times as fast.

To use the EGPRS service, subscribe to it from your service provider and save the

GPRS settings for the functions that you want to use over the EGPRS network. For

information on pricing, availability, and data transfer speed, contact your service

provider.

When you have selected GPRS as a data bearer, the phone uses EGPRS instead of

GPRS if this is available in the network. You cannot choose between EGPRS and

GPRS, but for some applications, such as browsing WAP or xHTML pages, you may

be able to select either GPRS or CSD.

DEFINE GPRS CONNECTION

You can define when the phone connects to the GPRS or EGPRS network.

1From the menus, select Settings > Connectivity > GPRS > GPRS Connection.

2Select one of the following options:

When needed—The phone registers and connects to the GPRS or EGPRS

network only if you use a function that needs the GPRS service. Establishing a

connection may take longer than when Always online is selected.

Always online—The phone automatically registers to a GPRS or EGPRS

network when you switch the phone on, if the network is available in your

location.

GPRS DIAL-UP CONNECTION

When you use your Nokia phone as a wireless modem, you have the option of

enabling GPRS connectivity from your PC or laptop computer. The GPRS dial-up

connection is a Network Service.

Before you can use GPRS technology, you must save the GPRS settings for each of

the applications used over GPRS. Some service providers may have already set up

information for your GPRS dial-up connection.

Use this procedure to save GPRS modem settings.

1From the menus, select Settings > Connectivity > GPRS > GPRS modem

settings.

2Select one of the following options:

Active access point—Select the access point to be used in GPRS modem

connections.

Edit active access point—Edit the currently selected GPRS access point and

create an alias for it. Contact your service provider for details.

GPRS ICONS

The following icons appear in the upper left corner of the screen to show you the

status of your GPRS connection.

Data communication applications

For information on using a data communication application, refer to the

documentation provided with the application.

If you use an IR connection, activate the IR connection in your phone by selecting

Settings > Connectivity > Infrared from the menus. Also, make sure that the

connection is active in your PC.

If you use the DKU-5 data cable:

1Connect the cable to the USB port on your computer and to the connector on

your phone.

2Start using the data communications application on the computer.

Note:Making or answering phone calls during a computer connection is

not recommended as it might disrupt the operation.

For better performance during data calls, place the phone on a stationary surface

with the keypad facing downward. Do not move the phone during a data call.

Indicates that the GPRS connection mode is Always online and the

GPRS service is available.

Indicates that the GPRS connection has been interrupted by a voice

call or text message. The phone tries to reestablish the connection

after the call.

Indicates an active GPRS connection, for example, when you are using

the browser.

Menu functions

• CALL SETTINGS

Automatic volume control

Automatic volume control automatically adjusts the phone earpiece volume

according to the noise level in your environment and the volume of the speaker on

the other end of the call. For example, if you are in a noisy environment, the volume

is increased. If the person you are speaking with is shouting loudly, the volume is

decreased.

Automatic volume control is not available if you are using a headset or other

accessory.

ACTIVATE AUTOMATIC VOLUME CONTROL VIA THE MENU

1From the menus, select Settings > Call settings > Automatic volume control.

2Select On to activate, or Off to deactivate. The default setting is Off.

ACTIVATE AUTOMATIC VOLUME CONTROL DURING A CALL

Note:Setting automatic volume control during an active call affects only

the current call.

1During a call, select Options.

2Select Auto volume on to activate, or Auto volume off to deactivate.

If you increase the volume during an active call by pressing the volume key, the

phone volume level increases regardless of whether or not automatic volume

control is activated.

When you end the call, the volume returns to the level set before automatic volume

control was activated.

Call forwarding

Call forwarding tells your network to redirect incoming calls to another number.

Note:Call forwarding is network-dependent and may not work the same in

all networks. Contact your service provider for availability.

ACTIVATE CALL FORWARDING

Note:This is a network-dependent feature. Some options listed in the

following table may not appear in the display. Contact your service

provider for more information.

1From the menus, select Settings > Call settings > Call forwarding, then

select one of the following:

Forward all voice calls—Forward all calls to the number you specify.

Forward if busy—Forward incoming calls when you are in a call.

Forward if not answered—Forward incoming calls to another number if you

are unable to answer. You can also set a delay before forwarding takes place.

Forward if out of reach—Forward incoming calls when your phone is off.

Forward when not able to take calls—Forward calls that are not picked up.

You can also set a delay before forwarding takes place.

Forward all fax calls—Forward all fax calls to a fax mailbox.

Forward all data calls—Forward all data calls to a data mailbox.

Cancel all call forwarding—Cancel any call forwarding options you may have

set.

2Select Activate.

3Select the destination to which your calls will be forwarded.

4Enter the number to which your calls, data, or other information will be

forwarded and select OK.

Your phone calls the network to activate the feature you have requested. The

network sends a confirmation note when the feature has been activated

successfully.

CANCEL CALL FORWARDING

From the menus, select Settings > Call settings > Call forwarding > Cancel all

call forwarding.

Note:Cancel all call forwarding may affect your ability to receive voice mail

messages. Contact your service provider for specific details.

Anykey answer

Anykey answer allows you to answer an incoming call by briefly pressing any key

except the power key, the selection keys, and the End key.

1From the menus, select Settings > Call settings > Anykey answer.

2Select On to activate or Off to deactivate.

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a “fast” busy

signal when you dial. With automatic redial activated, your phone redials the

number up to 10 times, and notifies you once the network is available.

1From the menus, select Settings > Call settings > Automatic redial.

2Select On to activate or Off to deactivate.

1-touch dialing

You can turn the 1-touch dialing feature on and off. For more information, see

“1-touch dialing” on page 61.

Menu functions

1From the menus, select Settings > Call settings > 1-touch dialing.

2Select On to activate or Off to deactivate.

Call waiting

If supported by your service provider, call waiting notifies you of an incoming call

even while you are in a call. You can then accept, reject, or ignore the incoming call.

ACTIVATE OR DEACTIVATE CALL WAITING

1From the menus, select Settings > Call settings > Call waiting.

2Select Activate or Cancel.

USE CALL WAITING

1During a call, press the Talk key to answer the waiting call.

The first call is put on hold.

2Press the End key to end the active call.

Summary after call

You can display the time spent on a call when you hang up.

1From the menus, select Settings > Call settings > Summary after call.

2Select On to activate or Off to deactivate.

Send my caller identity

You can prevent your number from being displayed on the receiving party’s caller

ID. This feature is network-dependent and works on a call-by-call basis. Contact

your service provider for more information.

1From the menus, select Settings > Call settings > Send my caller identity.

2Select Default, Yes, or No.

A message appears in the display confirming your selection.

Select a line for outgoing calls

Note:This is a network-dependent feature. Check with your service provider

for availability and a description of the feature.

1From the menus, select Settings > Call settings > Line for outgoing calls.

Note:If you select Line 2 but have not subscribed to this network service,

you will not be able to place calls. However, calls on both lines can be

answered regardless of the selected line.

2Select either Line 1 or Line 2.

A message appears in the display confirming your selection.

Note:If supported by your SIM card, you can prevent the line selection by

using the Lock option.

• PHONE SETTINGS

Set the display language

1From the menus, select Settings > Phone settings > Language.

2Select the language of your choice.

View the phone memory

1From the menus, select Settings > Phone settings > Memory status.

After a brief pause, Free memory, Used memory, Contacts, Text messages,

Multimedia msgs., Gallery, Organizer, and Applications appear in the display.

2Scroll through the list to view the memory associated with each item.

Note:For more information, see “Shared memory” on page 3.

Activate or deactivate automatic Keyguard

When the Keyguard is on, calls still may be possible to the official emergency

number programmed into your phone. Enter the emergency number and press the

Send key.

You can set the keypad of your phone to lock automatically after a preset time

delay (from 10 seconds to 60 minutes). When the preset delay expires, the keypad

locks automatically.

1From the menus, select Settings > Phone settings > Automatic keyguard.

2Select On to activate or Off to deactivate.

3If you selected On, Set delay appears in the display.

4Enter the delay (in mm:ss format) and select OK.

Activate or deactivate cell info display

Note:Cell info display is network-dependent and may not work the same in

all networks. Contact your service provider for availability.

When this function is selected, your phone will indicate when it is used in a system

cell based on Micro Cellular Network technology. MCN technology increases the

capacity of wireless networks in urban areas. The setting will remain in effect even if

the SIM card is changed or the phone is switched off.

1From the menus, select Settings > Phone settings > Cell info display.

2Select On to activate or Off to deactivate.

A message appears in the display confirming your selection.

Note:If the GPRS connection is set to Always online, info messages may

not be received. In that case, set the GPRS connection to When needed,

see “GPRS, EGPRS, HSCSD, CSD” on page 71 for more information.

Menu functions

Write a welcome note

You can write a welcome note which shows up briefly on your display whenever

you power up your phone.

Predictive text input cannot be used for entering welcome note text.

1From the menus, select Settings > Phone settings > Welcome note.

2Enter a note (up to 44 characters).

Press the Star key to display and select from available special characters. For

more information on special characters, see “Enter punctuation and special

characters” on page 25.

3When you are finished, select Options > Save.

Set up network selection

You may be able to manually search for another network which has a roaming

agreement with your home service provider.

1From the menus, select Settings > Phone settings > Network selection.

2Select one of the following options.

Automatic—Your phone defaults to those settings which have been preset by

your service provider.

Manual—Your phone searches for a network which has a roaming agreement

with your service provider.

Note:If No system access appears in the display, you will need to switch

to Automatic mode, or insert another SIM card into the phone.

Confirm SIM service actions

This option allows you to request notification when your service provider makes

changes to SIM-related services (such as activating GPRS service).

1From the menus, select Settings > Phone settings > Confirm SIM service

actions.

2Select Yes to request notification, or No to prevent notification.

A message appears in the display confirming your selection.

Activate or deactivate help text

Your phone displays brief descriptions for most menu items. When you arrive at a

feature or menu, pause for about 15 seconds. Use the scroll keys to page through

the full help text, if necessary.

The default setting for Help text is On. However, you can turn help text on or off

by doing the following from the start screen.

1From the menus, select Settings > Phone settings > Help text activation.

2Select On to activate or Off to deactivate.

A message appears in the display confirming your selection.

Activate or deactivate start-up tone

You can set your phone to play (or not to play) a start-up tone when the phone is

switched on.

1From the menus, select Settings > Phone settings > Start-up tone.

2Select On to activate or Off to deactivate.

A message appears in the display confirming your selection.

• ENHANCEMENT SETTINGS

The Enhancement settings menu is shown only if the phone is or has been

connected to one of the compatible enhancements such as the headset or music

stand.

Each compatible enhancement appears in the Enhancement settings menu only

after it has been connected to the phone. Once an enhancement has been

connected, it always appears in the menu even if it is not currently connected.

1From the menus, select Settings > Enhancement settings.

2Select either Headset, Handsfree, Loopset, TTY, Music stand, or Charger.

A list of options appears in the display.

3Select the option of your choice and follow the prompts.

Headset options

Default profile—Choose the profile you wish to be automatically activated when a

headset is connected.

Automatic answer—Calls are answered automatically after one ring when a

headset is connected. Select On or Off.

Handsfree options

Handsfree options are available when the phone is connected to a car kit.

Default profile—Choose the profile you wish to use when your phone is connected

to a car kit.

Automatic answer—Calls are answered automatically after one ring when a car kit

is connected.Select On or Off.

Lights—Choose to keep the phone lights always on, or to shut off automatically

after several seconds. Select On or Automatic.

Menu functions

Ignition sense—When the phone is connected to the full car kit, prevents the phone

from draining the car battery when the car ignition is off. Select Ignition on to

automatically switch off the phone approximately 20 seconds after the car ignition

is turned off. Select Ignition off to leave the phone on when the car ignition is

turned off.

Loopset options

Use loopset—Enable use of the LPS-4 mobile inductive loopset. Select Yes or No.

Default profile—Choose the profile you wish to be automatically activated when a

loopset is connected.

Automatic answer—Calls are answered automatically after one ring when a

loopset is connected. Select On or Off.

TTY options

Use TTY—Activates the TTY feature. Select Yes to activate TTY or No to deactivate.

Music stand options

Default profile—Choose the profile you wish to be automatically activated when

your phone is connected to the music stand.

Automatic answer—Calls are answered automatically after one ring when the

phone is connected. Select On or Off.

Lights—Choose to keep the phone lights always on, or to shut off automatically

after several seconds. Select On or Automatic.

Charger options

Default profile—Choose the profile you wish to be automatically activated when

your phone is connected to the charger.

Lights—Choose to keep the phone lights always on, or to shut off automatically

after several seconds. Select On or Automatic.

• SECURITY SETTINGS

For information about security features, see “Phone security” on page 26.

• RESTORE FACTORY SETTINGS

You can reset some of the menu settings to their original values.

1From the menus, select Settings > Restore factory settings.

2Enter the security code (the default is 12345) and select OK.

A message appears in the display confirming that original settings have been

restored.

Note:Data that you have entered or downloaded is not deleted. For

example, names and numbers in contacts are not affected.

Menu functions

Gallery (Menu 5)

You can save pictures and ringing tones to folders in the gallery,

or create folders of your own and save them there. You can download images and

tones using MMS, web sites, or Nokia PC Suite.

Your phone supports usage rights to protect content that you have acquired. A

piece of content, such as a ringing tone, can be protected and associated with

certain usage rules, for example the number of usage times. The rules are defined

in the content’s usage rights that can be delivered with the content or separately,

depending on the service provider. You may be able to update these rights. Always

check the delivery terms of any content and usage rights before acquiring them, as

they may be subject to a fee.

• FOLDERS

1At the start screen, select Menu 8 (Gallery).

2Select one of the following options.

View folders—Display the folders in the gallery menu.

Add folder—Create a new folder.

Delete folder—Delete a folder you have created.

Rename folder—Rename a folder you have created.

Usage rights list—View the available usage rights and manage the usage

rights list.

Gallery downloads—Download more images and tones. Select Image

downloads or Tone downloads, then select a site. Selecting More bookmarks

displays the list of bookmarks in the Services menu.

When you select Gallery downloads, the phone tries to connect to the Internet

using your browser and the currently active set of gallery downloads. If the

connection fails, you may need to activate another set or change the current

settings. See “Set up for browsing” on page 100 for more information.

• FOLDER ITEMS

1From the menus, select Gallery > View folders.

A list of folders appears in the display.

2Scroll to a folder and select Open.

A list of images or tones appears in the display.

3Scroll to an image or tone, then select Options.

Depending on the type of file, some of the following options appear:

Play—Play a multimedia file.

Pause—Pause a multimedia file that is playing.

Open—Open the selected file.

Delete—Delete the selected file.

Send—Send the selected file.

Note:The Send option may not be available if the selected file (either

image or sound) is copyrighted.

Edit image—Start the image editor.

Move—Move the file to another folder.

Rename—Rename the selected file.

Mute audio—Mute a sound file.

Unmute audio—Unmute a muted sound file.

Set contrast—Adjust the contrast in the image.

Set as wallpaper—Set the image as wallpaper.

Set as ring tone—Use the tone as the ringing tone in the current profile.

Details—View details of the file, such as the name, time and date the file was

created.

Sort—Sort the files according to date, type, name, or size.

View in sequence—View all of the images in the folder sequentially as a slide

show, or listen to each of the tones in sequence.

Update rights—Update the usage rights of the selected file if it has valid usage

rights. This option is only shown if the file supports rights updating.

from being copied, modified, transferred, or forwarded.

• EDIT AN IMAGE

1From the menus, select Gallery > View folders.

2Select a folder that contains images and select Open.

3Scroll to an image and select Options > Edit image > Options.

Options include Save, Insert text, Insert frame, and Insert clip-art.

4To insert text in the center of the image:

a) Select Insert text.

b) Enter text in the text editor and select OK.

Menu functions

c) Use the scroll keys to move the text within the image; then select OK.

5To put a frame around the image:

a) Select Insert frame.

b) Scroll to one of the frame images in the Graphics folder and select

Options > Insert.

c) When the image is displayed with the frame added, select OK.

6To insert clip art in the center of the image:

a) Select Insert Clip-art.

b) Scroll to one of the clip art images in the Graphics folder and select

Options > Insert.

c) When the image is displayed with the clip art added, select OK.

7To save the edited image, select Options > Save.

Media (Menu 6)

In this menu you can use the built-in camera, FM radio, and voice

recorder.

• CAMERA

You can take photos with the built-in camera and adjust its settings. The camera

lens is on the back of the phone, and the color display of the phone works as a

viewfinder. The camera produces JPEG images. The camera self-timer has a

10-second delay. After you have taken a picture, you can attach it to a multimedia

message and send it with MMS, save it as wallpaper in the standby mode, save it in

a compatible PC using Nokia PC Suite software, and upload it to a web address with

the content image uploader. When you attach a picture to an entry in your list of

contacts, the picture is displayed when your contact calls you.

Note:This feature uses shared memory. See “Shared memory” on page 3 for

more information.

If there is not enough memory to take a new photo, you need to free some by

deleting old photos or other files in the gallery.

When using the features in this device, obey all laws and respect privacy and

legitimate rights of others.

Take a photo

1From the menus, select Media > Camera, then select one of the following

options:

Standard photo—Lets you take a photo in landscape orientation under normal

lighting conditions.

Portrait photo—Lets you take a photo in portrait orientation that can be added

to a name/phone number saved in contacts.

Night mode—Lets you take a photo in landscape orientation in dim lighting.

2The live image appears on the display, and you can use the display as a

viewfinder.

3To take a photo, select Capture.

When taking a photo, a shutter sound is heard. The phone saves the photo in

the Photos folder of the Gallery menu. The saved photo is shown on the

display.

4Select Back to take another photo.

Menu functions

Select Options and select one of the following:

Zoom—Display a zoomed-in version of the photo.

Delete—Delete the selected photo.

Send—Send the selected photo.

Rename—Rename the selected photo.

Change mode—Select either Standard photo, Portrait photo, or Night mode.

Open Gallery—Display the Photos folder in the Gallery.

Set contrast—Increase or decrease contrast of the selected photo using the

Scroll right and Scroll left keys.

Set as wallpaper—Set the photo as wallpaper.

Details—View details of the photo, such as the name, time and date the photo

was taken.

Note:When a photo is zoomed, the photo is not stored permanently in the

zoomed size. You cannot edit or send a zoomed photo. Select Back to

display the image in normal size.

Self-timer

1From the menus, select Media > Camera > Self-timer.

2Select either Standard photo, Portrait photo, or Night mode.

3Select Start.

After the timeout, the camera takes the photo and saves it in the Gallery

menu.

While the self-timer is running, a beeping sound is heard.

Settings

You can select the level of image quality, turn camera sounds on and off, and define

a default title to be used when you save a photo.

From the menus, select Media > Camera > Settings, then select one of the

following:

Default mode—Select either Standard photo, Portrait photo, or Night mode as

the default.

Image quality—Define file compression when saving the image. Select High,

Normal, or Basic. High has the least file compression and provides the best image

quality, but takes more memory.

Camera sounds—Set the shutter sound and the self timer tone to On or Off.

Default title—Define the title that will be used when saving a photo. If you select

Automatic, the default title will be used, or if you select My title, you can enter or

edit a new title.

•RADIO

Your phone has an FM radio that also functions as an alarm clock radio. You can

listen to the FM radio on your phone through the handsfree speaker or with a

HDB-4 boom headset. For FM stereo, connect a DT-1 music stand or HDS-3 stereo

headset to the connector on the bottom of the phone.

The FM radio uses the wire of the headset as an antenna. A compatible headset

needs to be attached to the device for the FM radio to function properly.

The quality of a radio broadcast depends on coverage of the radio station in that

particular area.

Note:Listen to music at a moderate level. Continuous exposure to high

volume may damage your hearing.

Turn the radio on and off

1Attach an audio enhancement to the phone.

2From the menus, select Media > Radio.

3To turn off the radio, press and hold the End key.

Use the radio

Note:When you place or receive a call, the radio automatically mutes.

Once the call is ended, the radio switches back on.

With the radio on, select Options, then select one of the following:

Turn off—Turn off the radio.

Save channel—Save the current station to one of 20 locations.

Automatic tuning—Briefly press a scroll key to start the channel search up or

down. Select OK when a channel is found.

Manual tuning—Press the Scroll up key or the Scroll down key to search in

increments of 0.1 MHz.

Set frequency—Manually enter the frequency of a known radio station.

Delete channel—Delete a saved channel.

Rename—Enter a new name for the saved channel and select OK.

Loudspeaker—Listen to the radio through the speakerphone.

Headset—Listen to the radio through the headset.

Menu functions

Mono output/Stereo output—Listen to the radio in monaural mode (default) or in

stereo. Stereo output is available through a stereo enhancement.

To set the radio frequency, press the Star key. To tune the radio manually, press the

Pound key.

To adjust the volume, press the Scroll right key (louder) and the Scroll left key

(softer).

Note:When an application using a GPRS connection is sending or receiving

data, it may interfere with the radio.

Save a radio channel

You can save a preset station to any one of 20 locations in memory, and then tune

to that station by pressing the Scroll up key or the Scroll down key with the radio

on.

1With the radio on, press and hold the Scroll up key or the Scroll down key to

start the channel search.

Searching stops when a channel is found.

2To save the channel, select Options > Save channel.

3Enter a name for the channel and select OK.

4Select an (empty) location to save the channel.

To save an FM station quickly to 1–9 memory locations, press and hold the

corresponding number key while the radio is playing. Then, enter the name of the

channel and select OK.

• VOICE RECORDER

You can make a short (up to one minute) recording and save it to the Recordings

folder in the Gallery. You can also record your phone calls.

Note:Obey all laws governing recording of calls. Do not use this feature

illegally.

Make a recording

1From the menus, select Media > Voice recorder.

2To start the recording, select Record.

3Hold the phone in the normal position near your ear and record your message.

4To stop the recording, select Stop.

The recording is saved in the Recordings folder of the Gallery.

Record a phone call

During a call, select Options > Record. To stop recording, select Stop.

The recording is saved in the Recordings folder of the Gallery.

Manage recordings

1From the menus, select Media > Voice recorder > Recordings list.

2Scroll to the Recordings folder and select Open.

3Scroll to the desired recording and select Options; then select one of the

following options:

Open—Listen to the recording.

Delete—Delete the recording.

Rename—Enter a new name for the recording.

Set as ring tone—Use the recording as the phone ringing tone.

Details—View the name, size, date, time, length, format, and copyright status

of the recording.

Sort—Sort the recordings in the folder by name, date, format, or size.

Menu functions

Organizer (Menu 7)

Your phone has many useful features for organizing your

everyday life, including an alarm clock, a calendar, and a calculator.

• ALARM CLOCK

The alarm clock is based on the internal clock of your phone. It sounds an alert or

turns on the built-in FM radio at the time you specify. The alarm works even if the

phone is off if there is enough power in the battery. When the alarm is triggered,

the clock radio alarm stays on until the radio is turned off.

Select an alarm tone

From the menus, select Organizer > Alarm clock > Alarm tone, then select one of

the following:

Standard—Select the default alarm tone.

Radio—Use the radio as an alarm. If you select this option, connect the headset to

the phone. The phone uses the last channel you listened to as an alarm tone. If the

headset is not connected, the default alarm tone is used.

Ringing tone—Select an alarm tone from the ringing tone list.

Open Gallery—Select a sound clip from a Gallery folder to use as an alarm. Open a

folder that contains tones, scroll to the tone you want, and select Options >

Select.

Set an alarm

NOT ALREADY SET

1From the menus, select Organizer > Alarm clock > Alarm time.

2Enter the time for the alarm in hh:mm format, and select OK.

3Select am or pm.

Alarm on appears briefly in the display and appears on the start screen.

ALREADY SET

1From the menus, select Organizer > Alarm clock > Alarm time > On.

2Enter the time for the alarm in hh:mm format, and select OK.

3Select am or pm.

Alarm on appears briefly in the display and appears on the start screen.

Turn off an alarm setting

From the menus, select Organizer > Alarm clock > Alarm time > Off.

Alarm off appears briefly in the display.

When the alarm sounds

Your phone beeps, vibrates, and the display lights up. Stop and Snooze appear in

the bottom of the display.

WITH THE PHONE ON

Select Stop to shut the alarm off.

Select Snooze. The alarm stops for 10 minutes and Snoozing appears in the display.

If you do not press a key, the alarms stops (snoozes) for 10 minutes, and then

sounds again.

WITH THE PHONE OFF

If the alarm time is reached while the device is switched off, the device switches

itself on and starts sounding the alarm tone. If you select Stop, the device asks

whether you want to activate the device for calls. Select No to switch off the

device or Yes to make and receive calls. Do not select Yes when wireless phone use

may cause interference or danger.

•CALENDAR

The calendar keeps track of reminders, calls you need to make, meetings, and

birthdays. It can even sound an alarm for any of these events.

Open the Calendar

From the menus, select Organizer > Calendar.

Press the Right selection key at the start screen.

After a brief pause, the month view of the calendar appears in the display with the

current date highlighted. You can move to another date by using the four-way

scroll keys like a joystick.

Menu functions

Month view

The month view provides an overview of the selected

month and weeks. It also allows you to jump to a specific

date. Any days or dates that appear in bold font contain

calendar notes such as a meeting or reminder.

Week view

The Week view displays one week at a time, with each day

divided into one-hour blocks.

In the month view, select Options > Week view.

To return to the month view, select Back.

Calendar options

In either calendar view, select Options to display the following options:

Day notes—View calendar notes for the selected day

Week view—Go to the week view (available only in month view).

Make a note—Enter a note for the selected day or time.

Go to date—Jump to another date.

Settings—Set the date and time, date and time format, the day each week starts, and

whether you want your notes to autodelete after a specified time.

Go to a date

1In either calendar view, select Options > Go to date.

2Enter the date (for example, 12/15/2003) and select OK.

The calendar appears in the display with the jump date highlighted.

Make a calendar note

You can choose from five types of notes: Meeting, Call, Birthday, Memo, and

Reminder. Your phone asks for further information depending on which note you

choose. You also have the option to set an alarm for any note that you select.

1Go to the date for which you want to set a reminder.

See “Go to a date” on page 91 for more information.

2From the monthly view with the go to date highlighted, select Options >

Month view

Week view

Make a note, then select one of the following:

3Enter the note and select Options > Save.

4Enter the information requested by the prompts.

View calendar notes

After you have created some calendar notes, you can view them as follows:

1From the menus, select Organizer > Calendar.

After a brief pause, the monthly view appears in the display with the current

date highlighted. Any dates that contain calendar notes are in bold.

2Use four-way scrolling to go to the date containing the note.

3Select Options > Day notes.

Any notes you have for the day appear in a list format.

4Scroll to the desired note and select Options > View.

The body of the note appears in the display.

Options while viewing calendar notes

Select Options while viewing a day’s notes to display and the following options

appear:

View—View the full note (available only in header view).

Make a note—Make another note for the selected date (available only in header

view).

Delete—Delete the note.

Edit—Edit the note.

Move—Move the note to another date on your calendar.

Meeting prompts you to enter a subject, location, and then a start/end time.

You are then given the option to set an alarm.

Call prompts you to enter a phone number, a name, and the time. You are then

given the option to set an alarm.

Birthday prompts you to enter the person’s name, and year of birth. You are

then given the option to set an alarm.

Memo prompts you to enter a subject and then an end date. You are then

given the option to set an alarm.

Reminder prompts you to enter the subject you wish to be reminded about. You

are then given the option to set an alarm.

Menu functions

Repeat—Make the note recur on a regular basis (daily, weekly, biweekly, monthly,

and yearly).

Go to date—Jump to another date on your calendar (available only in header view).

Send note—Send the note to another device using Infrared or as a text message or

in vCal format.

Copy—Copy the note. You can then paste the note to another date.

Settings—Set the date and time, date and time format, the day each week starts, and

whether you want your notes to autodelete after a specified time.

Send a calendar note to another device

1From the menus, select Organizer > Calendar.

After a brief pause, the monthly view appears in the display. Days containing

notes are in bold font.

2Jump or scroll to the date containing the note you wish to send.

3Select Options > View day.

4Scroll to the note you wish to send and select Options > Send note.

5Select either Via Infrared, Via calendar, or Via text message.

6If you selected Via Infrared, align the infrared ports of both devices and select

Select.

Ensure the other device is set to receive data using IR. For more information

on enabling IR in the receiving device, refer to the user guide for the receiving

device.

The note is sent.

7If you selected Via calendar, enter the number for the recipient (or select Find

to retrieve a number from contacts) and select OK.

The note is sent.

8If you selected Via text message, the note appears in the display.

9Select Options > Send.

10 Enter the number for the recipient (or select Find to retrieve a number from

contacts), and select OK.

The note is sent.

Receive Calendar notes from another device

When you receive a calendar note, your phone displays Calendar note received.

You can then save the note in your calendar and set an alarm for any date and time.

VIEW RECEIVED CALENDAR NOTES

1When your phone displays Calendar note received, select Show.

The text of your note appears in the display.

2Press the scroll keys to view the entire message, if necessary.

SAVE RECEIVED CALENDAR NOTES

After viewing the Calendar note, select Options > Save.

DISCARD VIEWED CALENDAR NOTES

After viewing the Calendar note, select Options > Discard.

• CALCULATOR

Basic calculations

The calculator in your phone adds, subtracts, multiplies, divides, counts the square

and the square root, and converts currency values.

Note:This calculator has limited accuracy and is designed for simple

calculations.

1From the menus, select Extras > Calculator.

2In the calculator screen, enter the first number in the calculation.

Press the Pound key for a decimal point if necessary.

3To perform an arithmetic calculation, press the Star key to cycle through the

add (+), subtract (-), multiply (*), and divide (/) characters, and pause briefly

to select the displayed character.

To perform a square or square root calculation, select Options, then select

Square or Square root.

4For an arithmetic calculation, enter the second number in your calculation,

then select Options > Equals.

The sum of your calculation appears in the display.

Currency conversion

You can convert foreign currency to domestic, or vice versa directly from the start

screen.

1At the start screen, enter a currency amount to convert.

2Select Options, then select one of the following options:

To home—Converts foreign currency to domestic currency.

To foreign—Converts domestic currency to foreign currency.

If you have not done so already, you are prompted to enter the

exchange rate.

Menu functions

3Enter the exchange rate, using the Pound key to insert a decimal if needed,

and select OK.

The converted amount appears in the display.

Edit the exchange rate

1From the menus, select Extras > Calculator > Options > Exchange rate.

2Select one of the following options:

Foreign units in home units—Enter the number of home units it takes to make

one unit of foreign currency.

Home units in foreign units—Enter the number of foreign units it takes to

make one unit of your home currency.

3Enter the exchange rate and select OK.

The exchange rate is saved.

Applications (Menu 8)

Your phone supports J2ME Java applications. You will find Java

applications and games pre-installed on your phone. Also, you can manage and

download new applications and games from your service provider.

Running some applications and games may consume the battery faster and you

may need to connect the phone to the charger.

•GAMES

Challenge yourself or a friend to one of the fun games in your phone!

1From the menus, select Applications > Games.

2Select one of the following options.

Select game—Select a game or enter a game option list. See “Game options”

on page 97 for more info on game options.

Game downloads—Connect to game downloads on the Internet using your

browser.

Memory—Check the available memory for games and game related

applications.

Settings—Turn game sounds, lights, and shakes on or off.

Game downloads menu

1From the menus, select Applications > Games > Game downloads.

2Select one of the options displayed.

After a brief pause, the phone connects to the web pages using the currently

active set of browser settings.

If the connection fails, you may enter the Services menu and activate another set

of service settings. See “Options while online” on page 105 for more info on

browser settings.

When downloading a game, it may be saved in the Applications menu instead of

the Games menu.

Launch a game

1From the menus, select Applications > Games > Select game.

2Scroll to a game and press the Talk key.

If the selection is a single game it will launch. Otherwise, a list of games within

the selected game set appears in the display.

3To launch a single game, scroll to the desired game and press the Talk key.

Menu functions

If a game uses the whole display area, selection keys such as Options or Back will

not appear in the display. Press the Left selection key or the Right selection key to

show the options keys Select or Back (returns to the game).

Game options

While viewing the games list, select Options to display the following options. Scroll

to an option and select Select to activate the option or enter its submenu.

Open—Play the game.

Delete—Delete the game.

Web access—Choose an option for restricting network access. Options are Ask

first, Allowed, and Not allowed.

Update version—Check if a new version of the game is available for download.

Web page—Get more information or additional data from an Internet page. This

feature is shown only if it is supported by the network and an internet address has

been provided by the game.

Service settings—Some games need specific service settings. Your phone is set to

use as default the service settings for the browser.

Details—Display details of the game.

Game settings

You can turn game sounds, lights, and vibration on or off.

From the menus, select Applications > Games > Settings.

Select either Games sounds, Game lights, or Shakes.

Select either On or Off.

• COLLECTION

Launch an application

1From the menus, select Applications > Collection > Select application.

2Scroll to an application or an application set.

3To launch the application, press the Talk key.

Select Options > Open.

An application may require a few seconds to load. When you open an

application, wait for the launch screen to disappear. At that point, the

application is ready.

Application options

Open—Open the selected application or application set.

Delete—Delete the application or application set from your phone. If you delete a

pre-installed application, you will not be able to recover it.

Web access—Choose an option for restricting network access: Ask first (ask for net

access), Allowed (allow net access), Not allowed (do not allow net access).

Update version—Check if a new version of the application is available for

download.

Web page—Get further information or additional data for the application from an

Internet page. This feature must be supported by a service provider. It is only shown

if an Internet address has been provided with the application.

Connect via—Some applications need specific service settings. Your phone is set to

use as default the service settings for the browser.

Details—Shows additional information about the application.

Download applications

Note:This feature is network-dependent. Contact your service provider for

more information.

You can download new Java applications in different ways.

APPLICATION DOWNLOADS

1From the menus, select Applications > Collection > App. downloads.

After a brief pause, the list of available browser bookmarks appears in the

display.

2Select More bookmarks to access the list of browser bookmarks in your

Services menu.

3Select the bookmark that contains the application you wish to download.

After a brief pause, you are connected to the web page.

See “Navigate the mobile Internet” on page 101 for information on browsing

web pages.

If the connection fails, you may enter the Services menu and activate another

set of service settings. See “Options while online” on page 105 for more info on

browser settings.

DOWNLOAD LINKS

1From the menus, select Services > Download links.

2Select an application from the list.

Menu functions

Note:Only install sources that offer adequate protection against harmful

software.

PC SUITE

Use the Java Application installer from PC Suite to download the applications in

your phone.

Note:Only install sources that offer adequate protection against harmful

software.

View memory status for applications

You can view the size of memory available for game and application installations.

From the menus, select Applications > Collection > Memory.

Services (Menu 9)

Your phone has a built-in browser you can use to connect to

selected services on the mobile Internet. You can view weather reports, check news

or flight times, view financial information, and much more. The multi-mode

browser on your phone can display content that uses Wireless Mark-up Language

(WML) or extensible Hypertext Mark-up Language (xHTML).

Note:This feature is network dependent. Contact your service provider for

more information.

Because mobile Internet content is designed to be viewed from your phone, your

service provider is now your mobile Internet service provider as well.

It is likely that your service provider has created a home page and set up your

browser to go to this page when you log on to the Internet. Once at your service

provider’s home page, you may find links to a number of other sites.

• SET UP FOR BROWSING

It may not be necessary to manually configure the browser on your phone.

Normally this is done by your service provider once you have subscribed to the

feature. You may also receive the service settings as an over the air message from

your service provider, or you may need to enter the service settings manually.

Contact your service provider if you have problems using the browser.

Save OTA service settings

To save the received settings, select Options >save.

To discard the settings, select Options > discard.

Enter service settings manually

1From the menus, select Services > Settings > Connection settings > Active

service settings.

2Scroll to the desired connection set and select Activate.

3Select Edit active service settings.

4Select each setting and enter the required information. Contact your service

provider for details.

Menu functions

• SIGN ON TO THE MOBILE INTERNET

Activate service settings for the desired service

1From the menus, select Services > Settings > Connections settings > Active

service settings.

2Scroll to the desired service and select Activate.

Connect to the service

Your service provider may have programmed the Right selection key to connect

you directly to a web site, for example, the provider’s customer site. You can change

this setting by reprogramming the Right selection key. See “Personal shortcuts” on

page 69.

You can also program the Right selection key to connect you directly to a web site

of your choice. See “Personal shortcuts” on page 69.

There are several ways to connect to a service:

• To open the service’s start page, from the menus, select Services > Home.

At the start screen, press and hold the 0 key.

• To select a bookmark, select Services > Bookmarks and select a bookmark

from the list.

If the bookmark does not work with the current active service settings,

activate another set of service settings and try again.

• To enter the address of the service, select Services > Go to address. Enter the

address of the service and select OK.

After a brief pause, the phone attempts to connect to your service provider’s home

page.

If you see Check service settings, the phone may not be set up for browsing.

Contact your service provider to make sure that your phone is configured properly.

• NAVIGATE THE MOBILE INTERNET

Since your phone screen is much smaller than a computer screen, Internet content is

displayed differently from content displayed on a computer. This section contains

guidelines for using phone keys to navigate a WAP site.

• To browse the WAP site, press the Scroll up key or the Scroll down key.

• To select a highlighted item, press the Talk key.

• To enter letters and numbers, press a key from 0–9.

• To enter special characters, press the Star key.

• EXAMPLES OF MOBILE INTERNET SITES

The following illustrations show most of the elements you may find on a mobile

Internet site. These are examples only.

1)Header line. Shows the current Internet site.

2)Active link. Appears as a highlighted word.

3)Inactive link. Appears as an underlined word.

Scroll through the list of links using the Scroll up key

and the Scroll down key.

4)Selection list. Brackets [ ] appear when you have

the option to enter information.

5)Options. Select Options to go to the site menu

and/or browser page.

6)Back. Select Back to return to the previous page.

7)Data entry field. Brackets [ ] that enclose dots

indicate when you need to enter information. In this

example, you can enter your zip code to receive the

local weather forecast.

• BOOKMARKS

Your device may have some bookmarks loaded for sites not affiliated with Nokia.

Nokia does not warrant or endorse these sites. If you choose to access them, you

should take the same precautions for security or content as you would with any

Internet site.

You can save addresses for your favorite sites as bookmarks. You can add up to 50

bookmarks to your browser. Once you have saved a bookmark, you can program the

Go to menu to take you directly to that site. See “Personal shortcuts” on page 69.

Enter bookmarks manually

1From the menu, select Services > Bookmarks.

After a brief pause, a list of bookmarks (if any) appear in the display.

5) 6)

Menu functions

2Select Options > New bookmark.

3Enter an address for the bookmark and select OK.

4Enter a title for the bookmark and select OK.

A message appears in the display confirming your bookmark is saved.

Set bookmarks while online

While you are connected to the site that you want to bookmark, select Options >

Add bookmark.

A message appears in the display confirming your bookmark is saved.

Receive a bookmark

1When you receive a bookmark as an OTA message, select Options.

2Select View to view the bookmark, Save to add it to the bookmark list, or

Discard to discard it.

• SERVICE INBOX

You can receive service messages (“pushed messages”) from your service provider.

Receive service messages

To set the phone to receive service messages

From the menus, select Services > Settings > Service inbox settings > Service

messages > On.

To set the phone to automatically fetch the content indicated in the service

message:

From the menus, select Services > Settings > Service inbox settings > Automatic

connection > On.

View a service message

When you receive a service message, a note appears in the display.

At the start screen, select Show to view the message immediately, or Exit to save

it for later viewing.

While browsing, select Options > Other options > Service inbox.

To view a saved service message:

1From the menus, select Services > Service inbox.

2Scroll to the desired message and select Options; then select one of the

following:

Retrieve—Fetch the content indicated in the message.

Details—View the details of the message.

Delete—Delete the message.

•FILE UPLOAD

Depending on your service, you may be able to upload images and sound files from

your phone to a web page. You must be connected to an xHTML page that contains

embedded image upload tags. Follow the instructions on the display to upload files.

For more information, contact your service provider.

• DISCONNECT FROM THE INTERNET

To close your connection, press the End key twice.

• SET UP AN AUTOMATIC CONNECTION

Some service providers may have customized the options on the Services menu.

Contact your service provider for more information if the options shown here are

not available.

You can choose one of the following options for your GPRS connection.

1From the menus, select Connectivity > GPRS > GPRS connection.

2Select one of the following options.

Always online—The phone is automatically registered to a GPRS network when

you turn your phone on. When you use the WAP browser, the connection between

your phone and the network is created and data transfer is possible. When you

exit the WAP browser, the GPRS connection ends but the registration to the

GPRS network remains.

When needed—The GPRS connection is established when you use the WAP

browser and is closed when you exit the WAP browser.

• RECEIVE A CALL WHILE ONLINE

If you are using the WAP browser over GPRS, you can still receive a voice call. Your

data call is put on hold and you can choose to answer the call.

• To answer the incoming call, press the Talk key.

• To reject the incoming call, press the End key.

Menu functions

Note:After you end your voice call, the GPRS connection automatically

resumes.

• MAKE A CALL WHILE ONLINE

When you are browsing a WAP card and want to make a call, select Options >

Other options > Use detail > Phone number. Your phone then searches the

information on the WAP card for a string of numbers. You can then choose from

the number or numbers displayed to place the call.

An alternate way is to press the End key to disconnect from the Internet, then place

your call by searching contacts for a name and number or by keying in the phone

number.

• MAKE AN EMERGENCY CALL WHILE

ONLINE

If you are using GPRS to connect to the Internet, you can end your data connection

and then make an emergency call.

1To close your Internet connection, press the End key.

2Enter the emergency number for your present location (for example, 911).

3Press the Talk key.

• OPTIONS WHILE ONLINE

While you are connected to the Internet, select Options to access the following

options. Some service providers may have customized these options. Contact your

service provider for more information if any of the following options are not

available.

Home—Start the browser and go to your service provider’s home page.

Shortcuts—Open a new list of options that can be, for example, specific to the

current page.

Add bookmark—Save the current page as a bookmark.

Bookmarks—Display all saved bookmarks. Bookmarks help you find a WAP site

quickly.

Download links—View the list of bookmarks for downloading content.

Other options—View a list of other available options, including.

•Go to address—Go to another site on the mobile Internet.

•Service inbox—Receive service messages (“pushed” messages) from your

service provider.

•Appear. settings—Set settings for text wrapping and image viewing.

•Cookie settings—Set the phone to allow or prevent receiving cookies.

•Use detail—Copy information, such as a phone number, from the page.

•Clear the cache—Empty information or services you have accessed from your

phone memory.

•Security—Show security information about the current connection and the

server.

Reload—Reload and update the current page.

Quit—Disconnect from a service.

• SECURITY

Cache memory

A cache is a memory location that is used to store data temporarily. If you have

tried to access or have accessed confidential information requiring passwords,

empty the cache after each use. The information or services you have accessed are

stored in the cache.

To clear the cache from the menu, select Services > Clear the cache.

To clear the cache while browsing, select Options > Other options > Clear the

cache.

Certificates

To use some WAP services, such as banking services, you need an authority

certificate. Using the certificate can help you to improve the security of

connections between your phone and a WAP server.

You can download the certificate from a WAP page if the WAP service supports the

use of authority certificates. After the download, you can view the certificate, then

save or delete it. If you save the certificate, it is added to the list of certificates in

the phone.

Your phone alerts you if the identity of the WAP server or WAP gateway cannot be

verified or is not authentic.

To view the list of authority certificates, from the menus, select Services >

Settings > Security settings > Authority certificates > Certificate list.

Menu functions

Security module

The security module improves security services and allows you to use a digital

signature. It can contain certificates and public and private keys. Your service

provider saves the certificates in the security module.

From the menus, select Services > Settings > Security settings > Security

module settings, then select one of the following options:

Security module details—View the security module title, status, manufacturer, and

serial number.

Module PIN request—Select On to set the phone to ask for the module PIN when

using services provided by the security module.

Change module PIN—Change the module PIN, if allowed by the security module.

Change signing PIN—Change the signing PIN.

• ALLOW OR REJECT COOKIES

A cookie is data that a web site saves in your phone browser cache memory. The

data can be, for example, your user information or your browsing preferences.

Cookies will be saved until you clear the cache memory.

1From the menus, select Services > Settings > Security settings > Cookies.

While browsing, select Options > Other options > Security settings > Cookies.

2Select Allow to accept cookies or Decline to reject cookies.

• CREATE A DIGITAL SIGNATURE

You can make digital signatures with your phone. The signature can be traced back

to you through the private key on the security module and the user certificate that

was used to perform the signature. Using the digital signature can be the same as

signing your name to a paper bill, contract or other document.

1While browsing, select a link on a page, such as the title of the book you want

to buy and its price.

The text to sign (possibly including amount, date, etc.) will be shown.

2Check that the header text is Read and that the digital signature icon is shown.

If the digital signature icon does not appear, there is a security breach, and you

should not enter any personal data such as your signing PIN.

3Read all of the text before signing, scrolling through the text if necessary.

4To sign the text, select Sign.

5Select the user certificate you want to use, enter the signing PIN (provided

with the SIM card if the SIM card has a security module), and select OK.

The digital signature icon disappears, and the service may display a

confirmation of your purchase.

• APPEARANCE SETTINGS

You can determine how pages appear on the phone display.

1From the menus, select Services > Settings > Appearance settings.

While browsing, select Options > Other options > Appear.settings.

2Select one of the following options:

Text wrapping—Text on the web page continues on the next line if it cannot

be shown on only one line. Select On to allow text wrapping, or Off to prevent

text wrapping.

Show images—Select Yes to display pictures from the page, or No to hide

pictures. When pictures are displayed, pages load more slowly.

Menu functions

Instant messaging

You can now take text messaging to the next level by experiencing instant

messaging in a wireless environment. You can engage in instant messaging with

friends and family, regardless of the mobile system or platform (like the Internet)

they are using. It is different from using SMS or e-mail addresses to send messages

because you can have a true, two-way conversation. The contact list feature shows

you when your friends, family members, and colleagues are online and available to

exchange instant messages. Simply select the name, write the message, and send

it. Your message stays on the screen and when your friend/family/colleague replies,

the reply appears on the screen, above your original message, so you can track the

conversation.

Before you can start using instant messaging, you must first subscribe to the text

messaging service. Contact your service provider for details about pricing for

sending and receiving messages. You must also obtain a user name and password

before you can use instant messaging. See “Obtain user name and password” on

page 110 for more information.

Note: If instant messaging is not available from your wireless service

provider, the IM screen may not appear. Contact your service provider for

more information.

• NETWORK SELECTION

With IM, you have the choice of selecting the instant messaging service (network)

you want to use. Since each instant messaging service has its own display text and

icons associated with it, the display text and icons on your phone may appear

differently than what is displayed in this user guide update. If you have any

questions about the differences in the various networks’ display text and icons,

contact your service provider for more information.

The following table shows the instant messaging icons and their descriptions. The

icons and display text may appear differently, depending on which instant

messaging service you use.

Available

Do not disturb/Discreet

Appear offline

Available with an alert set

• OBTAIN USER NAME AND PASSWORD

Before you can begin to use instant messaging, you must obtain a user name and

password. You can do this by registering over the Internet (via your computer) with

the IM service provider you have selected to use. During the registration process

you will have the opportunity to create the user name and password of your choice.

For more information about signing up for instant messaging services, contact your

wireless service provider.

• LOG INTO SERVICE

The first time you use instant messaging, you will need to enter your user name and

password and select the network you want to use, in order to log into the service.

After the first login, you will not have to select the network again, unless you want

to change it. See “Instant messaging settings” on page 116 for more information.

Every time you log in, you will receive screen prompts for your user name and

password. You do not have to manually enter your user name (the user name you

entered previously appears on the User ID: screen); however, you must manually

enter your password every time you log in. To log in for the first time, perform the

following steps:

1From the menus, select IM > Login; then select the network to which you

want to connect.

A confirmation note appears, then the User ID: screen appears.

2Enter your user name, and select Options > OK.

The Password: screen appears.

3Enter your password, and select Options > OK.

Logging in appears, then Logged in appears, followed by the IM online menu

appearing.

After you have logged into instant messaging initially, you have the option of

Offline with an alert set

Blocked contact

Unread message/New

message

Read message

Group invitation

Menu functions

a manual login or an automatic login. See “Set up automatic login” on

page 117 for information on setting up automatic login.

• SET YOUR AVAILABILITY

You can determine if other users can tell whether you are available or not.

1From the IM online menu, select Availability.

2Select one of the following options:

Available—Others see your status as online and you receive availability

information and messages from others.

Do not disturb—Although others see your status as online, you do not receive

availability information and messages from others.

Appear offline—Although others see your status as offline, you receive

availability information and messages from others.

• INSTANT MESSAGES

You can send instant messages to anyone if you have the person’s user name. You

can also add that person to your contact list during an instant messaging session.

See “Add a new contact from the inbox” on page 113 for instructions.

Write and send instant messages

1From the IM online menu, select My contacts > Write message.

The User ID: screen appears.

2Enter the user name of the person to whom you want to send an instant

message.

3Select Options > OK.

The Conversation view appears with the contact’s name at the top.

4Select Options > Write message and enter a message.

Note: Predictive text input is automatically enabled for writing messages.

See “Predictive text input” on page 24 for information on using predictive

text.

5Select Options > Send.

Receive and reply to instant messages

When you receive an instant message, a screen appears, showing you have a new

instant message with the name of the sender.

1Select Open > Options > Write message and enter a message.

2Select Options > Send.

• CHAT SESSIONS

If you want to chat with a person, you must first add that person to the contact

list. See “Add a new contact to the contact list” on page 113 for instructions.

Chat session from the contact list view

1From the IM online menu, select My contacts.

2Select the contact with whom you want to chat; then select Chat.

The Conversation view appears with the contact’s name at the top.

3Select Options > Write message and enter a message.

4Select Options > Send.

The Conversation view appears with your user name and message displaying.

5After your contact replies, repeat steps 3-4 to continue your chat session.

Chat session from the inbox view

You can only initiate a chat session from this view, if an active chat is open or has

been saved. See “Save chat history” on page 112 for information on saving chat

sessions.

1From the IM online menu, select Inbox.

2Scroll to the contact with whom you want to chat.

3Select Options > Open.

4Select Options > Write message and enter a message.

5Select Options > Send.

The Conversation view appears with your user name and most recent message

displaying.

6After your contact replies, repeat steps 4-5 to continue your chat session.

Quit chat session

From the Conversation view, select Back > Options > End convers..

Conversation ended appears.

Save chat history

1From the Conversation view, select Options > Save.

The Conversation name: screen appears.

2Enter the name you want to use for the conversation and select Options >

Save.

Conversation saved appears.

Menu functions

View chat history

From the IM offline menu, select Saved convers.; then select the chat history you

want to view.

Rename chat history

1From the IM offline menu, select Saved convers.; then select the chat history

you want to rename.

2Select Options > Rename.

3Select Clear as many times as necessary to delete the current chat history

name; then enter the new chat history name.

4Select Options > OK.

Conversation renamed appears.

Delete chat history

1From the IM offline menu, select Saved convers.; then select the chat history

you want to delete.

2Select Options > Delete.

Conversation deleted appears.

•CONTACTS

You can add the names of your friends and family with whom you will be

interacting frequently via instant messaging to your contact list.

Add a new contact to the contact list

1From the IM online menu, select My contacts > Add contact.

The User ID: screen appears.

2Enter the contact’s user name, and select Options > OK.

The Nickname: screen appears.

3Enter the contact’s nickname, and select Options > OK.

Updating information appears, then Added to IM contacts appears.

Add a new contact from the inbox

You can add a new contact from the Inbox, if you have saved an instant messaging

session with that contact.

1From the IM online menu, select Inbox.

2Scroll to the contact name that you want to add, and select Options >Add.

The User ID: screen appears, with the contact’s user name displaying.

3Select Options > OK.

The Nickname: screen appears, with the contact’s nickname displaying.

4If you want to change the nickname, select Clear as many times as necessary

to delete the nickname, and enter the new nickname.

5Select Options > OK.

Updating information appears, then Added to IM contacts appears.

Search for a contact

1From the IM online menu, select My contacts > Search.

2Select one of the following options:

Screen name—Enter the first few characters of the contact’s screen name, and

select Options > Search.

User ID—Enter the first few characters of the contact’s user name, and select

Options > Search.

Phone number—Enter the first few numbers of contact’s phone number, and

select Options > Search.

E-mail—Enter the first few characters of the contact’s e-mail address, and

select Options > Search.

Remove a contact from the contact list

1From the IM online menu, select My contacts.

2Select the contact name you want to remove; then select Remove contact.

A message appears, asking if you want to remove the contact.

3Select OK.

Updating information appears, followed by a confirmation note.

Block messages from a contact

1From the IM online menu, select My contacts.

2Select the contact from whom you want to block messages; then select Block

contact.

A message appears, asking if you want to block messages from the contact.

3Select OK.

Updating information appears, followed by a confirmation note.

Unblock messages from a contact

1From the IM online menu, select My contacts.

2Select the contact from whom you want to unblock messages; then select

Unblock.

A message appears, asking if you want to unblock messages from the contact.

3Select OK.

Menu functions

Updating information appears, followed by a confirmation note.

Set an alert for a contact

You can set an alert for a contact to notify you when the contact’s availability

changes.

1From the IM online menu, select My contacts.

2Select the contact for whom you want to set an alert; then select Set alert.

Alert set appears.

Release an alert for a contact

1From the IM online menu, select My contacts.

2Select the contact for whom you want to release an alert; then select Release

user status alert.

User status alert released appears.

• PRIVATE GROUPS

You can create your own private chat groups. The participants must be entered in

your contact list. See “Contacts” on page 113 for more information.

Create private chat group

1From the IM online menu, select Group convers..

The Group name: screen appears.

2Enter the group name and select Options > OK.

Your screen name appears.

Note: You can enter up to ten characters for the group name.

3Select Options > OK.

Updating information appears, then a confirmation note appears, followed by

the Conversation view appearing with the group name at the top.

Add members to private group chat

1From the group’s Conversation view, select Options > Group members > Send

invitation.

2Select the contact whom you want to invite to the group chat.

The Invitation: screen appears.

3Enter the invitation text, and select Options > Send.

A confirmation note appears, then the group list displays.

4To add other members to the group, repeat steps 1–3.

Remove private group members

1In the group list, scroll to the member you want to remove.

2Select Options > Remove memb..

A message appears, asking you if you want to remove the member.

3Select OK.

Updating information appears, followed by a confirmation note.

Save a private group Chat

1From the group’s Conversation view, select Options > Save.

The Conversation name: screen appears.

2Enter the name you want to use for the group and select Options > Save.

Conversation saved appears.

Invitations to group chat

When you receive an invitation to a group chat, the New invitation received screen

appears, with the user name of the invitation sender displaying.

ACCEPT INVITATIONS TO GROUP CHAT

1Select Accept.

The Screen name: screen appears, with your screen name displaying.

2Select Options > OK.

Updating information appears, followed by a confirmation note.

REJECT INVITATIONS TO GROUP CHAT

Select Reject.

Invitation rejected appears.

• INSTANT MESSAGING SETTINGS

You can customize your instant messaging settings, depending upon the instant

messaging service you have selected. After you open instant messaging, select

Settings. The following options appear in the display:

Settings—Change your User ID, Password, GPRS address, SMS number, Bearer,

and Service name.

Screen name—Change your screen name.

Auto login—Set your login to the automatic state.

Contact ordering—Display your contacts by either Alphabetic or By status order.

Menu functions

Availability—Update your contacts’ online availability (presence) by using the

Updates option, or display how your presence is seen by other users by using the

Authorization option.

Set up screen name

You can set up or revise a screen name that is 1–20 characters in length.

Note: You must enter at least one character for your screen name. A blank

screen name is not allowed. You must have a screen name to be able to join

a group chat.

1From the IM menu, select Settings > Screen name.

The Screen name: screen appears.

2Enter your screen name and select Options > OK.

Screen name saved appears.

Set up automatic login

You can use automatic login after you have logged in with the user name and

password provided by your service provider.

From the IM menu, select Settings > Auto login > On IM start-up.

Set up contacts order

1From the IM menu, select Settings > Contact ordering.

2Select either Alphabetic or By status.

Set up presence status and authorization

Presence allows you and other users to know who is online and available to chat.

You can set your phone to automatically update a contact’s presence status every

time it is changed.

SET STATUS

From the IM menu, select Settings > Availability > Updates > On.

A confirmation note appears.

SET AUTHORIZATION

1From the IM menu, select Settings > Availability > Authorization.

2Select either My contacts or All.

A confirmation note appears.

Note: If you select My contacts, only the contacts in your contact list can

view your presence information. If you select All, anybody can view your

presence information.

• LOG OFF SERVICE

From the IM online menu, you can exit the IM application but still stay connected

to the IM service. This enables you to receive instant messages and chat invitations

from your contacts while using your phone for other purposes, such as playing a

game.

If you are connected to your IM service, but you have not used your IM application

for some time, you may be automatically disconnected from the IM service. The

next time you open the IM application, you will receive a message, Not connected

and you will be taken to the offline menu where you have to log in again.

To disconnect from the IM service, you must log out from the online menu. You will

then be taken to the offline menu, where you can log in again or exit the IM

application.

Exit instant messaging

1Select Back until Closing application appears, then the IM main menu screen

appears.

2Select Exit.

If you open IM again, you do not need to log in again.

Log out of instant messaging

1From the IM menu, select Logout.

Logout and end all chat sessions? appears.

2Select OK

3Logging out appears, followed by a confirmation note.

4If you want to exit IM, follow steps 1-2 under “Exit instant messaging” on

page 118.

Menu functions

Go to (Menu 10)

The Go to menu lets you access specific functions quickly. You

can personalize the menu so that it lists the functions you use most frequently. See

“Personal shortcuts” on page 69 for instructions on setting up the Go to menu.

SIM services (Menu 11)

In addition to the functions available on the phone, your SIM

card may provide additional services that you can access in this menu. This menu

is shown only if it is supported by your SIM card. The name and contents of the

menu depend entirely on the service available. For availability, rates, and

information on using SIM services, contact your service provider.

To see the messages sent between the phone and the network when you are using

the SIM services, select Settings > Phone settings > Confirm SIM service

actions > Yes.

Accessing these services may involve sending a text message or making a phone

call for which you may be charged.

9 Hardware and enhancements

• HARDWARE

Connection ports and other tools

• Charger connector (1)

• Flashlight (2)

• Pop-PortTM connector for headsets and data cables (3)

• IR (infrared) port (4)

• Camera lens on the back cover of the phone (5)

Recharge the battery

Your phone is powered by a rechargeable battery. To charge the battery:

1Plug the charger transformer in to a standard ac outlet.

2Insert the charger output plug into

the round connector at the bottom

end of the phone.

After a few seconds, the battery

indicator in the display starts to

scroll from bottom to top. If the

battery is completely flat, it may

take a few minutes before the

charging indicator appears on the

display or any calls can be made.

You can use the phone while the charger is connected.

Cut-out covers

You can use cut-out covers to quickly change the look of your phone.

Hardware and enhancements

CREATE A CUT-OUT COVER

The phone is supplied with a cutter that you can use to create your own cut-out

covers.

For cut-out covers, use only standard printer paper (weight 60-135g/m2, thickness

0.3 mm or less). Colors or ink used in the paper must not contain metal particles.

1Remove the carry strap around the cutter. There are separate cutters for the

front and back cut-out covers.

2Make sure that the two parts of the cutter are hooked together.

3Place a paper sheet between the cutter blades.

4Carefully press the blades together and remove the cut pieces from the

cut-out cover.

CHANGE CUT-OUT COVERS

The phone is supplied with some ready-to-use cut-out covers.

Warning:Before changing covers, ensure the phone is powered off and

disconnected from the charger or any other device. Avoid touching

electronic components while changing the covers. Always store and use

the phone with the covers attached.

1Remove the back cover as described in “Remove the back cover” on page 16.

2To remove the front cover, gently pull the top of

the front cover from the phone and lift the

cover.

3Remove the old cut-out cover from the back covers and the old cut-out cover

and keymat from the front cover.

4Place the new front cut-out cover on the front

cover

5Place the keymat on the template. Make sure

that the keymat is properly in place.

6To replace the front cover, align the top of

the phone with the top of the cover and

press the bottom of the phone towards the

cover until it locks into place.

7Place the new back cut-out

cover into the back cover by

sliding the cut-out cover

under the two guides in the

middle and at the bottom of

the back cover.

8Replace the back cover as described in “Replace the back cover” on page 17.

Hardware and enhancements

• ENHANCEMENTS

Power

• 720-mAh Li-Ion Battery (BLD-3)

• Standard Travel Charger (ACP-7)

• Rapid Travel Charger (ACP-8)

• Travel Charger (ACP-12)

• Mobile Charger (LCH-12)

• Spare Battery Charger (DDC-1) is

compatible with:

Standard Travel Charger (ACP-7)

Rapid Travel Charger (ACP-8)

Data

• Data cable (DKU-5)

• Desktop Stand (DCV-14) is

compatible with:

Data cable (DKU-5)

Carrying

• Wrist strap (CP-6)

Audio

• Music stand (DT-1)

• Headset (HS-5)

•Boom headset (HDB-4)

• Stereo headset (HDS-3)

• Retractable headset (HS-10)

• Loopset (LPS-4)

Accessibility

• TTY/TDD adapter (HDA-9)

Car

• Car installation kit (CARK-126)

• Full car kit (CARK-143)

• Antenna coupler (AXF-15S)

• Mobile holder (MBC-15S)

• Privacy handset (HSU-3)

• Headrest handsfree (BHF-1)

10 Reference information

• BATTERY INFORMATION

Charging and discharging

Your device is powered by a rechargeable battery. The full performance of a new

battery is achieved only after two or three complete charge and discharge cycles.

The battery can be charged and discharged hundreds of times but it will eventually

wear out. When the talk and standby times are noticeably shorter than normal, buy

a new battery. Use only Nokia approved batteries, and recharge your battery only

with Nokia approved chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not

leave the battery connected to a charger. Overcharging may shorten its lifetime. If

left unused, a fully charged battery will lose its charge over time. Temperature

extremes can affect the ability of your battery to charge.

Use the battery only for its intended purpose. Never use any charger or battery that

is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a

metallic object such as a coin, clip, or pen causes direct connection of the positive

(+) and negative (-) terminals of the battery. (These look like metal strips on the

battery.) This might happen, for example, when you carry a spare battery in your

pocket or purse. Short-circuiting the terminals may damage the battery or the

connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or

winter conditions, will reduce the capacity and lifetime of the battery. Always try

to keep the battery between 59°F and 77°F (15°C and 25°C). A device with a hot or

cold battery may not work temporarily, even when the battery is fully charged.

Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire! Dispose of batteries according to local

regulations. Please recycle when possible. Do not dispose as household waste.

• ENHANCEMENTS

A few practical rules about accessories and enhancements:

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp

and pull the plug, not the cord.

Reference information

• Check regularly that enhancements installed in a vehicle are mounted and are

operating properly.

• Installation of any complex car enhancements must be made by qualified

personnel only.

• ENHANCEMENTS, BATTERIES, AND

CHARGERS

Check the model number of any charger before use with this device. This device is

intended for use when supplied with power from ACP-7, ACP-8, ACP-12, and

LCH-12.

Warning:Use only batteries, chargers, and enhancements approved by

Nokia for use with this particular model. The use of any other types may

invalidate any approval or warranty, and may be dangerous.

For availability of approved enhancements, please check with your dealer. When

you disconnect the power cord of any enhancement, grasp and pull the plug, not

the cord.

Your device and its enhancements may contain small parts. Keep them out of reach

of small children.

• CARE AND MAINTENANCE

Your device is a product of superior design and craftsmanship and should be

treated with care. The suggestions below will help you protect your warranty

coverage and enjoy your device for many years.

• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture

can contain minerals that will corrode electronic circuits. If your device does

get wet, remove the battery and allow the device to dry completely before

replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and

electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic

circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal

circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean

the device.

• Do not paint the device. Paint can clog the moving parts and prevent proper

operation.

• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity

sensor, and light sensor lenses).

• Use only the supplied or an approved replacement antenna. Unauthorized

antennas, modifications, or attachments could damage the device and may

violate regulations governing radio devices.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest

authorized service facility for service.

• ADDITIONAL SAFETY INFORMATION

Operating environment

Remember to follow any special regulations in force in any area and always switch

off your device when its use is prohibited or when it may cause interference or

danger. Use the device only in its normal operating positions. To maintain

compliance with radio frequency exposure guidelines only use accessories

approved by Nokia for use with this device. When the device is on and being worn

on the body, always use an approved carrying case.

Medical devices

Operation of any radio transmitting equipment, including wireless phones, may

interfere with the functionality of inadequately protected medical devices. Consult

a physician or the manufacturer of the medical device to determine if they are

adequately shielded from external RF energy or if you have any questions. Switch

off your phone in health care facilities when any regulations posted in these areas

instruct you to do so. Hospitals or health care facilities may be using equipment

that could be sensitive to external RF energy.

PACEMAKERS

Pacemaker manufacturers recommend that a minimum separation of 6 in

(15.3 cm) be maintained between a wireless phone and a pacemaker to avoid

potential interference with the pacemaker. These recommendations are consistent

with the independent research by and recommendations of Wireless Technology

Research. To minimize the potential for interference, persons with pacemakers

should

• always keep the device more than 6 in (15.3 cm) from their pacemaker when

Reference information

the device is switched on

• not carry the device in a breast pocket

• hold the device to the ear opposite the pacemaker

If you have any reason to suspect that interference is taking place, switch off your

device immediately.

HEARING AID

Some digital wireless devices may interfere with some hearing aids. If interference

occurs, consult your service provider.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic

systems in motor vehicles such as electronic fuel injection systems, electronic

antiskid (antilock) braking systems, electronic speed control systems, air bag

systems. For more information, check with the manufacturer or its representative

of your vehicle or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle.

Faulty installation or service may be dangerous and may invalidate any warranty

that may apply to the device. Check regularly that all wireless device equipment in

your vehicle is mounted and operating properly. Do not store or carry flammable

liquids, gases, or explosive materials in the same compartment as the device, its

parts, or enhancements. For vehicles equipped with an air bag, remember that an

air bags inflate with great force. Do not place objects, including installed or

portable wireless equipment in the area over the air bag or in the air bag

deployment area. If in-vehicle wireless equipment is improperly installed and the

air bag inflates, serious injury could result.

Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere

and obey all signs and instructions. Potentially explosive atmospheres include areas

where you would normally be advised to turn off your vehicle engine. Sparks in

such areas could cause an explosion or fire resulting in bodily injury or even death.

Switch off the device at refuelling points such as near gas pumps at service

stations. Observe restrictions on the use of radio equipment in fuel depots, storage,

and distribution areas, chemical plants or where blasting operations are in

progress. Areas with a potentially explosive atmosphere are often but not always

clearly marked. They include below deck on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas (such as propane or butane), and

areas where the air contains chemicals or particles such as grain, dust or metal

powders.

FCC regulations prohibit using your wireless device while in the air. The use of

wireless telephones in an aircraft may be dangerous to the operation of the

aircraft, disrupt the wireless telephone network, and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone

services to the offender, legal action, or both.

EMERGENCY CALLS

Important: Wireless phones, including this phone, operate using radio

signals, wireless networks, landline networks, and user-programmed

functions. Because of this, connections in all conditions cannot be

guaranteed. You should never rely solely on any wireless phone for

essential communications like medical emergencies.

To make an emergency call:

1If the phone is not on, switch it on. Check for adequate signal strength. Some

networks may require that a valid SIM card is properly inserted in the phone.

2Press End key as many times as needed to clear the display and ready the

phone for calls.

3Key in the official emergency number for your present location. Emergency

numbers vary by location.

4Press the Send key.

If certain features are in use, you may first need to turn those features off before

you can make an emergency call. Consult this guide or your service provider. When

making an emergency call, give all the necessary information as accurately as

possible. Your wireless phone may be the only means of communication at the

scene of an accident. Do not end the call until given permission to do so.

Reference information

CERTIFICATION INFORMATION (SAR)

THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE

TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and

manufactured not to exceed the emission limits for exposure to radio frequency

(RF) energy set by the Federal Communications Commission of the U.S.

Government. These limits are part of comprehensive guidelines and establish

permitted levels of RF energy for the general population. The guidelines are based

on standards that were developed by independent scientific organizations through

periodic and thorough evaluation of scientific studies. The standards include a

substantial safety margin designed to assure the safety of all persons, regardless of

age and health.

The exposure standard for wireless mobile phones employs a unit of measurement

known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is

1.6W/kg.* Tests for SAR are conducted using standard operating positions accepted

by the FCC with the phone transmitting at its highest certified power level in all

tested frequency bands. Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while operating can be well below

the maximum value. This is because the phone is designed to operate at multiple

power levels so as to use only the power required to reach the network. In general,

the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and

certified to the FCC that it does not exceed the limit established by the

government-adopted requirement for safe exposure. The tests are performed in

positions and locations (for example, at the ear and worn on the body) as required

by the FCC for each model.

The following values are the highest SAR values for this model phone as reported

to the FCC.

When tested for use at the ear:

FCCID # LJPRH-30 is 0.46 W/kg

FCCID # LJPRH-31 is 0.97 W/Kg

When worn on the body as described in this user guide:

FCCID #LJPRH-30 is 0.95 W/kg

FCCID # LJPRH-31 is 0.97 W/kg

(Body-worn measurements differ among phone models, depending upon available

enhancements and FCC requirements).

While there may be differences between the SAR levels of various phones and at

various positions, they all meet the government requirement. The FCC has granted

an Equipment Authorization for this model phone with all reported SAR levels

evaluated as in compliance with the FCC RF exposure guidelines. SAR information

on this model phone is on file with the FCC and can be found under the Display

Grant section of http://www.fcc.gov/oet/fccid after searching on

FCC ID LJPRH-30 and FCC ID LJPRH-31.

For body worn operation, this phone has been tested and meets the FCC RF

exposure guidelines for use with a carry case, belt clip, or holder that contains no

metal and that positions the handset a minimum of 7/8-inch (2.2 cm) from the

body. Use of other carry cases, belt clips, or holders may not ensure compliance

with FCC RF exposure guidelines. If you do not use a body-worn accessory and are

not holding the phone at the ear, position the handset a minimum of 7/8-inch (2.2

cm) from your body when the phone is switched on.

*In the United States and Canada, the SAR limit for mobile phones used by the

public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard

incorporates a substantial margin of safety to give additional protection for the

public and to account for any variations in measurements. SAR values may vary

depending on national reporting requirements and the network band. For SAR

information in other regions please look under product information at

www.nokia.com.

Technical information

11 Technical information

Feature Specification

Dimensions Width 45.1 mm

Height 107.5 mm

Depth 20.8 mm

Weight 90 gm with BLD-3 Li-Ion Battery

Wireless networks GSM 850, 900, 1800, and 1900 networks

Size (volume) 81 cu cm

Frequency range (Tx) GSM 850: 824–849 MHz (for RH-31)

GSM 900: 880–915 MHz (for RH-30)

GSM 1800: 1710–1785 MHz (for RH-30 and RH-31)

GSM 1900: 1850–1910 MHz (for RH-30 and RH-31)

Frequency range (Rx) GSM 850: 869–894 MHz (for RH-31)

GSM 900: 925–960 MHz (for RH-30)

GSM 1800: 1805–1865 MHz (for RH-30 and RH-31)

GSM 1900: 1930–1990 MHz (for RH-30 and RH-31)

Tx output power 2 W (max)

Battery voltage 3.7 Vdc

Number of channels 299

Memory capacity 8 MB flash memory

1.5 MB RAM

Operating temperature Between 59°F and 77°F (15°C and 25°C).

Number of entries in

contacts

Up to 250

12 Nokia one-year limited

warranty

Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from

defects in material and workmanship that result in Product failure during normal

usage, according to the following terms and conditions:

1The limited warranty for the Product extends for ONE (1) year beginning on the

date of the purchase of the Product. This one year period is extended by each

whole day that the Product is out of your possession for repair under this

warranty.

2The limited warranty extends only to the original purchaser (“Consumer”) of the

Product and is not assignable or transferable to any subsequent purchaser/

end-user.

3The limited warranty extends only to Consumers who purchase the Product in

the United States of America.

4During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole

option, any defective parts, or any parts that will not properly operate for their

intended use with new or refurbished replacement items if such repair or

replacement is needed because

of product malfunction or failure during normal usage. No charge

will be made to the Consumer for any such parts. Nokia will also

pay for the labor charges incurred by Nokia in repairing or replacing the

defective parts. The limited warranty does not cover defects in appearance,

cosmetic, decorative or structural items, including framing, and any

non-operative parts. Nokia’s limit of liability under the limited warranty shall

be the actual cash value of the Product at the time the Consumer returns the

Product for repair, determined by the price paid by the Consumer for the

Product less a reasonable amount for usage. Nokia shall not be liable for any

other losses or damages. These remedies are the Consumer’s exclusive

remedies for breach of warranty.

5Upon request from Nokia, the Consumer must prove the date of the original

purchase of the Product by a dated bill of sale or dated itemized receipt.

6The Consumer shall bear the cost of shipping the Product to Nokia in

Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to

the Consumer after the completion of service under this limited warranty.

7The Consumer shall have no coverage or benefits under this limited warranty

if any of the following conditions are applicable:

a) The Product has been subjected to abnormal use, abnormal conditions,

improper storage, exposure to moisture or dampness, unauthorized

modifications, unauthorized connections, unauthorized repair, misuse,

neglect, abuse, accident, alteration, improper installation, or other acts

Nokia one-year limited warranty

which are not the fault of Nokia, including damage caused by shipping.

b) The Product has been damaged from external causes such as collision

with an object, or from fire, flooding, sand, dirt, windstorm, lightning,

earthquake or damage from exposure to weather conditions, an Act of

God, or battery leakage, theft, blown fuse, or improper use of any

electrical source, damage caused by computer or Internet viruses, bugs,

worms, Trojan Horses, cancelbots or damage caused by the connection to

other products not recommended for interconnection by Nokia.

c) Nokia was not advised in writing by the Consumer of the alleged defect

or malfunction of the Product within fourteen (14) days after the

expiration of the applicable limited warranty period.

d) The Product serial number plate or the enhancement data code has been

removed, defaced or altered.

e) The defect or damage was caused by the defective function of the cellular

system or by inadequate signal reception by the external antenna, or

viruses or other software problems introduced into the Product.

8Nokia does not warrant uninterrupted or error-free operation of the Product.

If a problem develops during the limited warranty period, the Consumer shall

take the following step-by-step procedure:

a) The Consumer shall return the Product to the place of purchase for repair

or replacement processing.

b) If “a” is not convenient because of distance (more than 50 miles) or for

other good cause, the Consumer shall ship the Product prepaid and

insured to:

Nokia Inc., Attn.: Repair Department

795 West Nasa Blvd.

Melbourne, FL 32901

c) The Consumer shall include a return address, daytime phone number and/

or fax number, complete description of the problem, proof of purchase

and service agreement (if applicable). Expenses related to removing the

Product from an installation are not covered under this limited warranty.

d) The Consumer will be billed for any parts or labor charges not covered by

this limited warranty. The Consumer will be responsible for any expenses

related to reinstallation of the Product.

e) Nokia will repair the Product under the limited warranty within 30 days

after receipt of the Product. If Nokia cannot perform repairs covered

under this limited warranty within 30 days, or after a reasonable number

of attempts to repair the same defect, Nokia at its option, will provide a

replacement Product or refund the purchase price of the Product less a

reasonable amount for usage. In some states the Consumer may have the

right to a loaner if the repair of the Product takes more than ten (10) days.

Please contact the Customer Service Center at Nokia at the telephone

number listed at the end of this warranty if you need a loaner and the

repair of the Product has taken or is estimated to take more than ten (10)

days.

f) If the Product is returned during the limited warranty period, but the

problem with the Product is not covered under the terms and conditions

of this limited warranty, the Consumer will be notified and given an

estimate of the charges the Consumer must pay to have the Product

repaired, with all shipping charges billed to the Consumer. If the estimate

is refused, the Product will be returned freight collect. If the Product is

returned after the expiration of the limited warranty period, Nokia’s

normal service policies shall apply and the Consumer will be responsible for

all shipping charges.

9YOU (THE CONSUMER) UNDERSTAND THAT THE PRODUCT MAY CONSIST OF

REFURBISHED EQUIPMENT THAT CONTAINS USED COMPONENTS, SOME OF

WHICH HAVE BEEN REPROCESSED. The used components comply with Product

performance and reliability specifications.

10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A

PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE

FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING

LIMITED WARRANTY IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND

IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL

NOT BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL

DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS

OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE

DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT,

COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES,

DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS,

AND INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE

PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF

CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE

THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES.

NOKIA SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE

LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE

PRODUCT IS BEING REPAIRED.

11 Some states do not allow limitation of how long an implied warranty lasts, so

the one year warranty limitation may not apply to you (the Consumer). Some

states do not allow the exclusion or limitation of incidental and consequential

damages, so certain of the above limitations or exclusions may not apply to

you (the Consumer). This limited warranty gives the Consumer specific legal

rights and the Consumer may also have other rights which vary from state to

state.

12 Nokia neither assumes nor authorizes any authorized service center or any

other person or entity to assume for it any other obligation or liability beyond

that which is expressly provided for in this limited warranty including the

Nokia one-year limited warranty

provider or seller of any extended warranty or service agreement.

13 This is the entire warranty between the Nokia and the Consumer, and

supersedes all prior and contemporaneous agreements or understandings, oral or

written, relating to the Product, and no representation, promise or condition not

contained herein shall modify these terms.

14 This limited warranty allocates the risk of failure of the Product between the

Consumer and Nokia. The allocation is recognized by

the Consumer and is reflected in the purchase price.

15 Any action or lawsuit for breach of warranty must be commenced within

eighteen (18) months following purchase of the Product.

16 Questions concerning this limited warranty may be directed to:

Nokia Inc.

Attn.: Customer Service

7725 Woodland Center Blvd., Suite. 150

Tampa, FL 33614

Telephone: 1-888-NOKIA-2U (1-888-665-4228)

Facsimile: (813) 287-6612

TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)

17 The limited warranty period for Nokia supplied attachments and

enhancements is specifically defined within their own warranty cards and

packaging.

[ 137 ]

Appendix A Message from the CTIA

Appendix A

Message from the CTIA

(Cellular Telecommunications

& Internet Association)

to all users of mobile phones.

Washington, DC 20036. Phone: (202) 785-0081

[ 138 ]

Safety is the most important call you will ever make.

A Guide to Safe and Responsible Wireless Phone Use

Tens of millions of people in the U.S. today take advantage of the unique combination

of convenience, safety and value delivered by the wireless telephone. Quite simply,

the wireless phone gives people the powerful ability to communicate by voice--almost

anywhere, anytime--with the boss, with a client, with the kids, with emergency

personnel or even with the police. Each year, Americans make billions of calls from

their wireless phones, and the numbers are rapidly growing.

But an important responsibility accompanies those benefits, one that every wireless

phone user must uphold. When driving a car, driving is your first responsibility. A

wireless phone can be an invaluable tool, but good judgment must be exercised at

all times while driving a motor vehicle--whether on the phone or not.

The basic lessons are ones we all learned as teenagers. Driving requires alertness,

caution and courtesy. It requires a heavy dose of basic common sense---keep your

head up, keep your eyes on the road, check your mirrors frequently and watch out

for other drivers. It requires obeying all traffic signs and signals and staying within

the speed limit. It means using seatbelts and requiring other passengers to do the same.

But with wireless phone use, driving safely means a little more. This brochure is a

call to wireless phone users everywhere to make safety their first priority when

behind the wheel of a car. Wireless telecommunications is keeping us in touch,

simplifying our lives, protecting us in emergencies and providing opportunities to

help others in need.

When it comes to the use of wireless phones, safety is your most important call.

Wireless Phone "Safety Tips"

Below are safety tips to follow while driving and using a wireless phone which

should be easy to remember.

1 Get to know your wireless phone and its features such as speed dial and redial.

Carefully read your instruction manual and learn to take advantage of valuable

features most phones offer, including automatic redial and memory. Also, work

to memorize the phone keypad so you can use the speed dial function without

taking your attention off the road.

2 When available, use a hands free device. A number of hands free wireless phone

accessories are readily available today. Whether you choose an installed mounted

device for your wireless phone or a speaker phone accessory, take advantage of

these devices if available to you.

3 Position your wireless phone within easy reach. Make sure you place your

wireless phone within easy reach and where you can grab it without removing

your eyes from the road. If you get an incoming call at an inconvenient time, if

possible, let your voice mail answer it for you.

[ 139 ]

Appendix A Message from the CTIA

4 Suspend conversations during hazardous driving conditions or situations. Let

the person you are speaking with know you are driving; if necessary, suspend the

call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice

can be hazardous, but so is heavy traffic. As a driver, your first responsibility is

to pay attention to the road.

5 Do not take notes or look up phone numbers while driving. If you are reading an

address book or business card, or writing a "to do" list while driving a car, you

are not watching where you are going. It’s common sense. Don’t get caught in a

dangerous situation because you are reading or writing and not paying attention

to the road or nearby vehicles.

6 Dial sensibly and assess the traffic; if possible, place calls when you are not

moving or before pulling into traffic. Try to plan your calls before you begin your

trip or attempt to coincide your calls with times you may be stopped at a stop

sign, red light or otherwise stationary. But if you need to dial while driving,

follow this simple tip--dial only a few numbers, check the road and your mirrors,

then continue.

7 Do not engage in stressful or emotional conversations that may be distracting.

Stressful or emotional conversations and driving do not mix--they are

distracting and even dangerous when you are behind the wheel of a car. Make

people you are talking with aware you are driving and if necessary, suspend

conversations which have the potential to divert your attention from the road.

8 Use your wireless phone to call for help. Your wireless phone is one of the

greatest tools you can own to protect yourself and your family in dangerous

situations--with your phone at your side, help is only three numbers away. Dial

9-1-1 or other local emergency number in the case of fire, traffic accident, road

hazard or medical emergency. Remember, it is a free call on your wireless phone!

9 Use your wireless phone to help others in emergencies. Your wireless phone

provides you a perfect opportunity to be a "Good Samaritan" in your community.

If you see an auto accident, crime in progress or other serious emergency where

lives are in danger, call 9-1-1 or other local emergency number, as you would

want others to do for you.

10 Call roadside assistance or a special wireless non-emergency assistance number

when necessary. Certain situations you encounter while driving may require

attention, but are not urgent enough to merit a call for emergency services. But

you still can use your wireless phone to lend a hand. If you see a broken-down

vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident

where no one appears injured or a vehicle you know to be stolen, call roadside

assistance or other special non-emergency wireless number.

Careless, distracted individuals and people driving irresponsibly represent a hazard

to everyone on the road. Since 1984, the Cellular Telecommunications Industry

Association and the wireless industry have conducted educational outreach to

inform wireless phone users of their responsibilities as safe drivers and good

citizens. As we approach a new century, more and more of us will take advantage of

the benefits of wireless telephones. And, as we take to the roads, we all have a

responsibility to drive safely.

The wireless industry reminds you to use your phone safely when driving.

[ 140 ]

For more information, please call 1-888-901-SAFE.

For updates: http://www.wow-com.com/consumer/issues/driving/

articles.cfm?ID=85

1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.

Phone: (202) 785-0081

[ 141 ]

Appendix B Message from the FDA

Appendix B

Message from the FDA (U.S.

Food and Drug Administration)

to all users of mobile phones.

July 18, 2001 ..... For updates: http://www.fda.gov/cdrh/phones

[ 142 ]

Consumer Update on Wireless Phones

U.S. Food and Drug Administration

1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are

associated with using wireless phones. There is no proof, however, that wireless

phones are absolutely safe. Wireless phones emit low levels of radiofrequency

energy (RF) in the microwave range while being used. They also emit very low levels

of RF when in the stand-by mode. Whereas high levels of RF can produce health

effects (by heating tissue), exposure to low level RF that does not produce heating

effects causes no known adverse health effects. Many studies of low level RF

exposures have not found any biological effects. Some studies have suggested that

some biological effects may occur, but such findings have not been confirmed by

additional research. In some cases, other researchers have had difficulty in

reproducing those studies, or in determining the reasons for inconsistent results.

2. What is FDA's role concerning the safety of wireless phones?

Under the law, FDA does not review the safety of radiation-emitting consumer

products such as wireless phones before they can be sold, as it does with new drugs

or medical devices. However, the agency has authority to take action if wireless

phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to

the user. In such a case, FDA could require the manufacturers of wireless phones to

notify users of the health hazard and to repair, replace or recall the phones so that

the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions, FDA has

urged the wireless phone industry to take a number of steps, including the

following:

• Support needed research into possible biological effects of RF of the type

emitted by wireless phones;

• Design wireless phones in a way that minimizes any RF exposure to the user

that is not necessary for device function; and

• Cooperate in providing users of wireless phones with the best possible

information on possible effects of wireless phone use on human health.

FDA belongs to an interagency working group of the federal agencies that have

responsibility for different aspects of RF safety to ensure coordinated efforts at the

federal level. The following agencies belong to this working group:

• National Institute for Occupational Safety and Health

• Environmental Protection Agency

• Federal Communications Commission

• Occupational Safety and Health Administration

• National Telecommunications and Information Administration

The National Institutes of Health participates in some interagency working group

activities, as well.

[ 143 ]

Appendix B Message from the FDA

FDA shares regulatory responsibilities for wireless phones with the Federal

Communications Commission (FCC). All phones that are sold in the United States

must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA

and other health agencies for safety questions about wireless phones. FCC also

regulates the base stations that the wireless phone networks rely upon. While these

base stations operate at higher power than do the wireless phones themselves, the

RF exposures that people get from these base stations are typically thousands of

times lower than those they can get from wireless phones. Base stations are thus not

the subject of the safety questions discussed in this document.

3. What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held wireless phones with built-in

antennas, often called cell mobile or PCS phones. These types of wireless phones

can expose the user to measurable radiofrequency energy (RF) because of the short

distance between the phone and the user’s head. These RF exposures are limited by

Federal Communications Commission safety guidelines that were developed with

the advice of FDA and other federal health and safety agencies. When the phone is

located at greater distances from the user, the exposure to RF is drastically lower

because a person's RF exposure decreases rapidly with increasing distance from the

source. The so-called cordless phones; which have a base unit connected to the

telephone wiring in a house, typically operate at far lower power levels, and thus

produce RF exposures far below the FCC safety limits.

4. What are the results of the research done already?

The research done thus far has produced conflicting results, and many studies have

suffered from flaws in their research methods. Animal experiments investigating the

effects of radiofrequency energy (RF) exposures characteristic of wireless phones

have yielded conflicting results that often cannot be repeated in other laboratories.

A few animal studies, however, have suggested that low levels of RF could accelerate

the development of cancer in laboratory animals. However, many of the studies that

showed increased tumor development used animals that had been genetically

engineered or treated with cancer-causing chemicals so as to be pre-disposed to

develop cancer in the absence of RF exposure. Other studies exposed the animals to

RF for up to 22 hours per day. These conditions are not similar to the conditions

under which people use wireless phones, so we don’t know with certainty what the

results of such studies mean for human health.

Three large epidemiology studies have been published since December 2000.

Between them, the studies investigated any possible association between the use of

wireless phones and primary brain cancer, glioma, meningioma, or acoustic

neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None

of the studies demonstrated the existence of any harmful health effects from

wireless phone RF exposures. However, none of the studies can answer questions

about long-term exposures, since the average period of phone use in these studies

was around three years.

[ 144 ]

5.What research is needed to decide whether RF exposure from wireless

phones poses a health risk?

A combination of laboratory studies and epidemiological studies of people actually

using wireless phones would provide some of the data that are needed. Lifetime

animal exposure studies could be completed in a few years. However, very large

numbers of animals would be needed to provide reliable proof of a cancer

promoting effect if one exists. Epidemiological studies can provide data that is

directly applicable to human populations, but 10 or more years follow-up may be

needed to provide answers about some health effects, such as cancer. This is because

the interval between the time of exposure to a cancer-causing agent and the time

tumors develop - if they do - may be many, many years. The interpretation of

epidemiological studies is hampered by difficulties in measuring actual RF exposure

during day-to-day use of wireless phones. Many factors affect this measurement,

such as the angle at which the phone is held, or which model of phone is used.

6. What is FDA doing to find out more about the possible health effects

of wireless phone RF?

FDA is working with the U.S. National Toxicology Program and with groups of

investigators around the world to ensure that high priority animal studies are

conducted to address important questions about the effects of exposure to

radiofrequency energy (RF).

FDA has been a leading participant in the World Health Organization International

Electromagnetic Fields (EMF) Project since its inception in 1996. An influential

result of this work has been the development of a detailed agenda of research needs

that has driven the establishment of new research programs around the world. The

Project has also helped develop a series of public information documents on EMF

issues.

FDA and the Cellular Telecommunications & Internet Association (CTIA) have a

formal Cooperative Research and Development Agreement (CRADA) to do

research on wireless phone safety. FDA provides the scientific oversight, obtaining

input from experts in government, industry, and academic organizations. CTIA-

funded research is conducted through contracts to independent investigators. The

initial research will include both laboratory studies and studies of wireless phone

users. The CRADA will also include a broad assessment of additional research

needs in the context of the latest research developments around the world.

7. How can I find out how much radiofrequency energy exposure I can

get by using my wireless phone?

All phones sold in the United States must comply with Federal Communications

Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures.

FCC established these guidelines in consultation with FDA and the other federal

health and safety agencies. The FCC limit for RF exposure from wireless telephones

is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg).

The FCC limit is consistent with the safety standards developed by the Institute of

Electrical and Electronic Engineering (IEEE) and the National Council on Radiation

Protection and Measurement. The exposure limit takes into consideration the

body’s ability to remove heat from the tissues that absorb energy from the wireless

phone and is set well below levels known to have effects.

[ 145 ]

Appendix B Message from the FDA

Manufacturers of wireless phones must report the RF exposure level for each model

of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives

directions for locating the FCC identification number on your phone so you can find

your phone’s RF exposure level in the online listing.

8. What has FDA done to measure the radiofrequency energy coming

from wireless phones?

The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical

standard for measuring the radiofrequency energy (RF) exposure from wireless

phones and other wireless handsets with the participation and leadership of FDA

scientists and engineers. The standard, Recommended Practice for Determining the

Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless

Communications Devices: Experimental Techniques, sets forth the first consistent

test methodology for measuring the rate at which RF is deposited in the heads of

wireless phone users. The test method uses a tissue-simulating model of the human

head. Standardized SAR test methodology is expected to greatly improve the

consistency of measurements made at different laboratories on the same phone.

SAR is the measurement of the amount of energy absorbed in tissue, either by the

whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g)

of matter. This measurement is used to determine whether a wireless phone

complies with safety guidelines.

9. What steps can I take to reduce my exposure to radiofrequency

energy from my wireless phone?

If there is a risk from these products--and at this point we do not know that there

is--it is probably very small. But if you are concerned about avoiding even potential

risks, you can take a few simple steps to minimize your exposure to radiofrequency

energy (RF). Since time is a key factor in how much exposure a person receives,

reducing the amount of time spent using a wireless phone will reduce RF exposure.

If you must conduct extended conversations by wireless phone every day, you

could place more distance between your body and the source of the RF, since the

exposure level drops off dramatically with distance. For example, you could use a

headset and carry the wireless phone away from your body or use a wireless phone

connected to a remote antenna.

Again, the scientific data do not demonstrate that wireless phones are harmful. But

if you are concerned about the RF exposure from these products, you can use

measures like those described above to reduce your RF exposure from wireless

phone use.

10. What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones, including

children and teenagers. If you want to take steps to lower exposure to radiofrequency

energy (RF), the measures described above would apply to children and teenagers

using wireless phones. Reducing the time of wireless phone use and increasing the

distance between the user and the RF source will reduce RF exposure.Some groups

sponsored by other national governments have advised that children be discouraged

from using wireless phones at all. For example, the government in the United Kingdom

[ 146 ]

distributed leaflets containing such a recommendation in December 2000. They

noted that no evidence exists that using a wireless phone causes brain tumors or

other ill effects. Their recommendation to limit wireless phone use by children

was strictly precautionary; it was not based on scientific evidence that any health

hazard exists.

11. What about wireless phone interference with medical equipment?

Radiofrequency energy (RF) from wireless phones can interact with some electronic

devices. For this reason, FDA helped develop a detailed test method to measure

electromagnetic interference (EMI) of implanted cardiac pacemakers and

defibrillators from wireless telephones. This test method is now part of a standard

sponsored by the Association for the Advancement of Medical instrumentation

(AAMI). The final draft, a joint effort by FDA, medical device manufacturers,

and many other groups, was completed in late 2000. This standard will allow

manufacturers to ensure that cardiac pacemakers and defibrillators are safe from

wireless phone EMI. FDA has tested hearing aids for interference from handheld

wireless phones and helped develop a voluntary standard sponsored by the Institute

of Electrical and Electronic Engineers (IEEE). This standard specifies test methods

and performance requirements for hearing aids and wireless phones so that no

interference occurs when a person uses a compatible phone and a accompanied

hearing aid at the same time. This standard was approved by the IEEE in 2000.

FDA continues to monitor the use of wireless phones for possible interactions with

other medical devices. Should harmful interference be found to occur, FDA will

conduct testing to assess the interference and work to resolve the problem.

12. Where can I find additional information?

For additional information, please refer to the following resources:

• FDA web page on wireless phones

http://www.fda.gov/cdrh/phones/index.html

• Federal Communications Commission (FCC) RF Safety Program

http://www.fcc.gov/oet/rfsafety

• International Commission on Non-Ionizing Radiation Protection

http://www.icnirp.de

• World Health Organization (WHO) International EMF Project

http://www.who.int/emf

• National Radiological Protection Board (UK)

http://www.nrpb.org.uk/

July 18, 2001 For updates: http://www.fda.gov/cdrh/phones

[ 147 ]

Index

Numerics

1-touch dialing . . . . . . . . . . 61, 74

access codes

PIN . . . . . . . . . . . . . . . . . . . . . . 26

PIN2 . . . . . . . . . . . . . . . . . . . . . 31

PUK . . . . . . . . . . . . . . . . . . . . . . 32

security . . . . . . . . . . . . . . . . . . . 30

access the Internet . . . . . . . . . 101

activate call forwarding . . . . . 73

adjust

earpiece volume . . . . . . . . . . . 20

ringing volume . . . . . . . . . . . . 64

advanced multimedia player . 33

alarm clock . . . . . . . . . . . . . . . . . 89

answer a call . . . . . . . . . . . . . . . 20

antenna . . . . . . . . . . . . . . . . . . . . 18

anykey answer . . . . . . . . . . . . . . 74

applications . . . . . . . . . . . . . . 96–99

automatic redial . . . . . . . . . . . . 74

automatic volume control . . . 73

battery

about . . . . . . . . . . . . . . . . . . . 123

recharge . . . . . . . . . . . . . . . . . 120

bookmarks . . . . . . . . . . . . . . . . . 102

brightness . . . . . . . . . . . . . . . . . . 67

business cards . . . . . . . . . . . . . . 60

calculator . . . . . . . . . . . . . . . . . . . 94

calendar . . . . . . . . . . . . . . . . . 90–94

call

duration . . . . . . . . . . . . . . . . . . 55

forwarding . . . . . . . . . . . . . . . . 73

lists, delete . . . . . . . . . . . . . . . . 55

log . . . . . . . . . . . . . . . . . . . .53–55

restriction . . . . . . . . . . . . . . . . . 27

times . . . . . . . . . . . . . . . . . . . . . 55

waiting . . . . . . . . . . . . . . . . . . . 75

caller

groups . . . . . . . . . . . . . . . . . . . . 62

ID . . . . . . . . . . . . . . . . . . . . . . . . 75

calls

answer . . . . . . . . . . . . . . . . . . . . 20

emergency . . . . . . . . . . . . . . . 105

make . . . . . . . . . . . . . . . . . . . . . 19

reject . . . . . . . . . . . . . . . . . . . . . 20

camera . . . . . . . . . . . . . . . . . . . . . . 84

cancel call forwarding . . . . . . . 74

cell info display . . . . . . . . . . . . . 76

chat . . . . . . . . . . . . . . . . . . . .112–113

clock radio . . . . . . . . . . . . . . . . . . 89

clock, set . . . . . . . . . . . . . . . . . . . . 18

closed user groups . . . . . . . . . . . 29

color scheme . . . . . . . . . . . . . . . . 66

conference calls . . . . . . . . . . . . . 19

connection ports . . . . . . . . . . . 120

connectivity . . . . . . . . . . . . . .70–72

contacts . . . . . . . . . . . . . . . . .56–63

1-touch dialing . . . . . . . . . . . . 61

add image . . . . . . . . . . . . . . . . . 59

business cards . . . . . . . . . . . . . 60

call from . . . . . . . . . . . . . . . . . . 59

caller groups . . . . . . . . . . . . . . . 62

[ 148 ]

copy . . . . . . . . . . . . . . . . . . . . . . 60

delete . . . . . . . . . . . . . . . . . . . . 59

find entry . . . . . . . . . . . . . . . . . 58

info numbers . . . . . . . . . . . . . . 62

memory . . . . . . . . . . . . . . . . . . . 63

menu options . . . . . . . . . . . . . . 56

own numbers . . . . . . . . . . . . . . 62

save . . . . . . . . . . . . . . . . . . . . . . 57

search . . . . . . . . . . . . . . . . . . . . 58

select view . . . . . . . . . . . . . . . . 63

service numbers . . . . . . . . . . . . 62

currency conversion . . . . . . . . . 94

customer care . . . . . . . . . . . . . . . . 9

customize profile . . . . . . . . . . . . 64

date settings . . . . . . . . . . . . . . . . 68

delete

1-touch dialing entry . . . . . . . 62

call lists . . . . . . . . . . . . . . . . . . . 55

contact entry . . . . . . . . . . . . . . 59

fixed dialing entry . . . . . . . . . . 28

messages . . . . . . . . . . . . . . . . . . 39

dialed numbers, view . . . . . . . . 54

dictionary . . . . . . . . . . . . . . . . . . . 24

display

brightness . . . . . . . . . . . . . . . . . 67

language . . . . . . . . . . . . . . . . . . 76

settings . . . . . . . . . . . . . . . . . . . 65

download

applications . . . . . . . . . . . . . . . 98

games . . . . . . . . . . . . . . . . . . . . 96

duration of calls . . . . . . . . . . . . 55

e-mail . . . . . . . . . . . . . . . . . . . . . . 46

emergency calls

while online . . . . . . . . . . . . . . .105

extras

currency conversion . . . . . . . . .94

fixed dialing . . . . . . . . . . . . . 28–29

flashlight . . . . . . . . . . . . . . . . . . . . . 4

folders

gallery . . . . . . . . . . . . . . . . . . . .81

message . . . . . . . . . . . . . . . . . . .38

forward messages . . . . . . . . . . . .44

gallery . . . . . . . . . . . . . . . . . . . . . . .81

games . . . . . . . . . . . . . . . . . . . 96–97

GPRS connectivity . . . . . . . . . . .71

help text . . . . . . . . . . . . . . . . . . . .77

images

add to contacts . . . . . . . . . . . . .59

edit in gallery . . . . . . . . . . . . . .82

info

message service . . . . . . . . . . . .52

numbers . . . . . . . . . . . . . . . . . . .62

infrared connectivity . . . . . . . .70

install SIM card . . . . . . . . . 16–17

instant messaging . . . . . 109–118

international calls . . . . . . . . . . .19

Internet

access . . . . . . . . . . . . . . . . . . . .101

bookmarks . . . . . . . . . . . . . . . .102

options . . . . . . . . . . . . . . . . . . .105

security . . . . . . . . . . . . . . . . . .106

[ 149 ]

Internet service . . . . . . . . 100–108

keyguard . . . . . . . . . . . . . . . . . . . 26

language . . . . . . . . . . . . . . . . . . . . 76

lock the keypad . . . . . . . . . . . . . 26

make a call . . . . . . . . . . . . . . . . . 19

menus . . . . . . . . . . . . . . . . . . . . . . 14

message

alert tone . . . . . . . . . . . . . . . . . 64

messages

default type . . . . . . . . . . . . . . . 37

delete . . . . . . . . . . . . . . . . . . . . 39

e-mail . . . . . . . . . . . . . . . . . . . . 46

folders . . . . . . . . . . . . . . . . . . . . 38

forward . . . . . . . . . . . . . . . . . . . 44

icons . . . . . . . . . . . . . . . . . . . . . 36

info message service . . . . . . . . 52

linked . . . . . . . . . . . . . . . . . . . . 35

multimedia . . . . . . . . . . . . . 47–50

options . . . . . . . . . . . . . . . . . . . 36

picture . . . . . . . . . . . . . . . . 44–46

read . . . . . . . . . . . . . . . . . . . . . . 43

reply . . . . . . . . . . . . . . . . . . . . . 43

send . . . . . . . . . . . .42, 45, 46, 48

service commands . . . . . . . . . . 52

settings . . . . . . . . . . . . . . . . 40–42

text . . . . . . . . . . . . . . . . . . . . . . 42

voice . . . . . . . . . . . . . . . . . . 50–52

missed calls, view . . . . . . . . . . . 54

multimedia

messages . . . . . . . . . . . . . . 47–50

player . . . . . . . . . . . . . . . . . . . . 33

music stand . . . . . . . . . . . . . . . . . 79

Nokia PC Suite . . . . . . . . . . . . . . 13

notes, calendar . . . . . . . . . . .91–94

operator logo . . . . . . . . . . . . . . . 66

organizer . . . . . . . . . . . . . . . . .89–95

alarm clock . . . . . . . . . . . . . . . . 89

calculator . . . . . . . . . . . . . . . . . 94

calendar . . . . . . . . . . . . . . . . . . 90

OTA settings . . . . . . . . . . . . . . . . 64

over the air settings . . . . . . . . . 64

own numbers . . . . . . . . . . . . . . . . 62

PC Suite . . . . . . . . . . . . . . . . . . . . 13

personal shortcuts . . . . . . . . . . . 69

phone

memory . . . . . . . . . . . . . . . . . . . 76

security . . . . . . . . . . . . . . . .26–32

picture messages . . . . . . . . .44–46

predictive text . . . . . . . . . . .24–25

profiles . . . . . . . . . . . . . . . . . .64–65

customize . . . . . . . . . . . . . . . . . 64

select . . . . . . . . . . . . . . . . . . . . . 64

timed . . . . . . . . . . . . . . . . . . . . . 65

punctuation . . . . . . . . . . . . . . . . . 25

quick keys . . . . . . . . . . . . . . . . . . . 11

radio . . . . . . . . . . . . . . . . . . . . . . . . 86

read messages . . . . . . . . . . . . . . . 43

receive e-mail . . . . . . . . . . . . . . . 46

received calls, view . . . . . . . . . . 54

[ 150 ]

recharge the battery . . . . . . . 120

redial a number . . . . . . . . . . . . . 19

registration . . . . . . . . . . . . . . . . . . 8

reject a call . . . . . . . . . . . . . . . . . 20

reply to messages . . . . . . . . . . . 43

restore factory settings . . . . . . 79

ringing tone . . . . . . . . . . . . . . . . . 64

safety . . . . . . . . . . . . . . . . . . . . . . . . 1

screen saver . . . . . . . . . . . . . . . . . 66

security

Internet . . . . . . . . . . . . . . . . . . 106

phone . . . . . . . . . . . . . . . . .26–32

select profile . . . . . . . . . . . . . . . . 64

self-timer . . . . . . . . . . . . . . . . . . . 85

send

business card . . . . . . . . . . . . . . 61

caller ID . . . . . . . . . . . . . . . . . . . 75

e-mail . . . . . . . . . . . . . . . . . . . . 46

multimedia messages . . . . . . . 48

picture messages . . . . . . . . . . . 45

text messages . . . . . . . . . . . . . . 42

service

commands . . . . . . . . . . . . . . . . 52

numbers . . . . . . . . . . . . . . . . . . 62

set

alarm clock . . . . . . . . . . . . . . . . 89

clock . . . . . . . . . . . . . . . . . . . . . 18

date . . . . . . . . . . . . . . . . . . . . . . 68

radio channel . . . . . . . . . . . . . . 86

settings . . . . . . . . . . . . . . . . . .64–80

anykey answer . . . . . . . . . . . . . 74

automatic redial . . . . . . . . . . . 74

call forwarding . . . . . . . . . . . . . 73

call waiting . . . . . . . . . . . . . . . . 75

camera . . . . . . . . . . . . . . . . . . . .85

cell info display . . . . . . . . . . . . .76

color scheme . . . . . . . . . . . . . . .66

display . . . . . . . . . . . . . . . . 65–67

display brightness . . . . . . . . . . .67

display language . . . . . . . . . . . .76

enhancements . . . . . . . . . . . . . .78

help text . . . . . . . . . . . . . . . . . .77

language . . . . . . . . . . . . . . . . . .76

line for outgoing calls . . . . . . .75

OTA . . . . . . . . . . . . . . . . . . . . . . .64

personal shortcuts . . . . . . . . . .69

phone . . . . . . . . . . . . . . . . . 76–78

phone memory . . . . . . . . . . . . .76

profiles . . . . . . . . . . . . . . . . 64–65

restore factory settings . . . . . .79

screen saver . . . . . . . . . . . . . . . .66

security . . . . . . . . . . . . . . . . . . .79

send caller ID . . . . . . . . . . . . . .75

start-up tone . . . . . . . . . . . . . . .78

summary after call . . . . . . . . . .75

time and date . . . . . . . . . . . . . .67

tone . . . . . . . . . . . . . . . . . . . . . .65

wallpaper . . . . . . . . . . . . . . . . . .65

welcome note . . . . . . . . . . . . . .77

shared memory . . . . . . . . . . . . . . .3

shortcuts

personal . . . . . . . . . . . . . . . . . . .69

SIM card, install . . . . . . . . . 16–17

special characters . . . . . . . . . . .25

start screen . . . . . . . . . . . . . . . . .11

start-up tone . . . . . . . . . . . . . . . .78

summary after call . . . . . . . . . .75

take a photo . . . . . . . . . . . . . . . . .84

[ 151 ]

text

entry . . . . . . . . . . . . . . . . . . 23–25

messages . . . . . . . . . . . . . . . . . 42

predictive . . . . . . . . . . . . . . 24–25

time settings . . . . . . . . . . . . . . . . 67

timed profile . . . . . . . . . . . . . . . . 65

tones . . . . . . . . . . . . . . . . . . . . . . . 64

turn off alarm clock . . . . . . . . 90

unlock the keypad . . . . . . . . . . 26

vibrating alert . . . . . . . . . . . . . . 64

view

call duration . . . . . . . . . . . . . . 55

call times . . . . . . . . . . . . . . . . . 55

dialed numbers . . . . . . . . . . . . 54

missed calls . . . . . . . . . . . . . . . 54

received calls . . . . . . . . . . . . . . 54

voice mail

listen to messages . . . . . . . . . . 21

set up . . . . . . . . . . . . . . . . . . . . 21

voice messages . . . . . . . . . . . 50–52

volume

earpiece . . . . . . . . . . . . . . . . . . 20

ringing tone . . . . . . . . . . . . . . . 64

wallpaper . . . . . . . . . . . . . . . . . . . 65

warranty . . . . . . . . . . . . . . . . . . . 132

welcome note . . . . . . . . . . . . . . . 77

[ 152 ]

05/03

NOTES

Para obtener un manual del usuario en español favor de

llamar o enviar un fax al teléfono 1-888-NOKIA-2U,

fax 813-249-9619.

Microsoft RH-30 GSM 900/1800/1900 Cellular Telephone User Manual ug cover

Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone ug cover

Manual

Navigation menu

Namespaces

Views

Navigation