Microsoft RH-51 GSM 900/1800/1900 Cellular Telephone w/Bluetooth User Manual 7610 FCCdraft2 04 08 2004 real

Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone w/Bluetooth 7610 FCCdraft2 04 08 2004 real

UserManual.wiki >

Microsoft >

RH 51 User Manual HTML Version

Manual

Nokia 7610 User Guide

PRELIMINARY DRAFT FOR FCC APPROVAL

APRIL 8, 2004

Phone information Numbers Where is the number?

My number Wireless service provider

Voice mail number Wireless service provider

Wireless provider’s number Wireless service provider

Provider’s customer care Wireless service provider

Model number Label on back of phone (under

battery)

Type number Label on back of phone (under

battery)

IMEI number Label on back of phone (under

battery)

FCC DRAFT

PRELIMINARY

FCC DRAFT

PRELIMINARY

LEGAL INFORMATION

DECLARATION OF CONFORMITY

We, NOKIA CORPORATION declare under our sole responsibility that the products RH-51 and RH52

are in conformity with the provisions of the following Council Directive: 1999/5/EC. A copy of the

Declaration of Conformity can be found at

http://www.nokia.com/phones/declaration_of_conformity

PART NO. 9230217, ISSUE NO. 1

Nokia, Nokia 7610, Nokia Connecting People, Pop-Port, and the Nokia Original Enhancements logos

are trademarks or registered trademarks of Nokia Corporation. Other company and product names

mentioned herein may be trademarks or trade names of their respective owners.

Printed in Canada, May 2004

Includes RSA BSAFE cryptographic or security protocol software from RSA Security.

Java is a trademark of Sun Microsystems, Inc.

(www.intuwave.com)

Bluetooth is a registered trademark of Bluetooth SIG, Inc.

USE OF THIS PRODUCT IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS

PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY

AND OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS

ENTERPRISE, AND (ii) FOR PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND

SEPARATELY LICENSED BY MPEG LA, L.L.C.

The information contained in this user guide was written for the Nokia 7610 product. Nokia operates

a policy of ongoing development. Nokia reserves the right to make changes to any of the products

described in this document without prior notice.

168

FCC DRAFT

PRELIMINARY

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME

OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER

CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY

APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS

DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY

TIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS

This device may contain commodities, technology or software subject to export laws and regulations

from the US and other countries. Diversion contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your device may cause TV or radio interference (for example, when using a telephone in close

proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your

telephone if such interference cannot be eliminated. If you require assistance, contact your local

service facility. This device complies with part 15 of the FCC rules. Operation is subject to the

condition that this device does not cause harmful interference.

Manufactured or sold under one or more of the following US patents:

4868846 4945633 5001372 5101175 5151946 5173927 5212834 5230091

5241583 5311151 5317283 5331638 5335362 5353328 5371481 5378935

5384782 5396657 5400949 5416435 5442521 5446364 5479476 5526366

5553125 5557639 5565821 5570369 5581244 5600708 5625274 5677620

5692032 5729541 5760568 5794142 5802465 5809413 5827082 5839101

5844884 5845219 5870683 5884103 5889770 5907823 5912570 5914690

5914796 5917868 5920826 5956332 5956625 5956633 5966378 5977887

5987137 5991857 6006114 6011853 6014551 6014573 6026161 6035189

6038238 6043760 6047196 6049796 6050415 6055439 6060193 6069923

6072787 6081732 6084920 6084962 6094587 6097964 6105784 6112099

6115617 6119180 6121846 6128509 6138091 6140966 6144243 6144676

6148209 6151485 6151507 6163609 6164547 6167248 6185295 6188909

6249584 6259312 6266330 6272361 6282436 6292668 6295286 6311054

6314166 6324389 6324412 6347218 6363259 6370362 6370389 6377820

6381468 6392660 6400958 6453179 6463278 6470470 6487397 6522670

6198928 4969192 5266782 5390223 5444816 5487084 5640395 5664053

5699482 5701392 5722074 5754976 5805301 5835889 5857151 5859843

5862178 5898925 5930233 5946651 5960354 5960389 5963901 6005857

6011971 6031827 6118775 6128322 6137789 6167248 6170073 6178535

6195338 6199035 6240076 6266321 6285888 6356759 6377803 6430163

6438370 6456237 RE32580 5818437 5953541 6011554 4558302

FCC DRAFT

PRELIMINARY

Nokia 7610 phone at a glance

Send key End key

Power key (on top)

Charger connector, Pop-Port connector,

and microphone (on bottom)

Five-way scroll key

Left selection key

Menu key

Edit key

Clear key

Right selection key

Display

Earpiece

Camera lens

Note: The internet symbol

appear on all phones.

on the 0 key does not

Speaker (on side)

FCC DRAFT

PRELIMINARY

Quick guide

Make a call Enter a phone number, and press the Send key.

Answer a call Press the Send key.

Answer call during call Select Options > Answer.

End a call Press the End key.

Decline a call Press the End key.

Mute a call Select Options > Mute during a call.

Redial Press the Send key twice.

Adjust call volume Scroll left or right with the scroll key during a call.

Use the in-call menu Select Options during a call.

Save a name and number Enter a number, select Options > Add to contacts >

Create new, choose a category, enter a name, and select

Done. See "Write text," p. 47.

Look up a name Select Menu > Contacts, and in the search field at the

bottom of the screen, key in the first letters of the name

you want to find.

Use 1-touch dialing Press and hold a key (2–9). You must assign a key to a

number in Contacts. See "Assign 1-touch dialing keys,"

p. 27.

Check voice mail Press and hold the 1key (contact your service provider

for details).

Write and send text

messages Select Menu > Messages > New message > Text

message. Enter the recipient in the To field. Enter the text

message, and select Options > Send.

Send a picture Capture a picture, allow the picture time to save, and

then select Options > Send > Via multimedia. Enter the

recipient in the To field. Enter the text message, and

select Options > Send.

Read a new message If a new message arrives, select Show to display the

message.

Press Press a key briefly and release it.

Press and hold Press and hold a key for 2 to 3 seconds and release it.

[ vii ]

FCC DRAFT

PRELIMINARY

Nokia 7610 phone at a glance . . . . . . . . . . . . . . . . . v

Quick guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi

1 FOR YOUR SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . 1

About your phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Network services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Shared memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 General information . . . . . . . . . . . . . . . . . . . . . . . . . 4

E-newsletters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Follow graphic clues. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Find the phone label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Contact Nokia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Accessibility solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Remove the back cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Insert the SIM card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Insert the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Insert the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Charge the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Switch the phone on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Attach the wrist strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Tips on efficient operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

If the phone requests a PIN code . . . . . . . . . . . . . . . . . . . . . . . . 10

If the phone requests a lock code . . . . . . . . . . . . . . . . . . . . . . . . 11

Set the time and date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

[ viii ]

FCC DRAFT

PRELIMINARY

Make a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Standby mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Options lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Common actions for all applications . . . . . . . . . . . . . . . . . . . . . 15

Search for items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Loudspeaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Keyguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

4 Your phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Make a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Answer a call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Call log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5 Personal information . . . . . . . . . . . . . . . . . . . . . . . 25

Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Presence (network service) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Positioning (network service) . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

To-do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Copy content from compatible Nokia phones . . . . . . . . . . . . . . 35

6 Multimedia. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

View images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

RealPlayer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Movie director. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

[ ix ]

FCC DRAFT

PRELIMINARY

Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

7 Messaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Write text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Write and send messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Create a multimedia presentation. . . . . . . . . . . . . . . . . . . . . . . . 52

Inbox—receive messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

My folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Remote mailbox (network service) . . . . . . . . . . . . . . . . . . . . . . . 55

Outbox. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

View messages on a SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Cell broadcast (network service) . . . . . . . . . . . . . . . . . . . . . . . . . 57

Service command editor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Messaging settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

8 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Call. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Call restriction (network service). . . . . . . . . . . . . . . . . . . . . . . . . 72

Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Enhancement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

9 Tools and applications. . . . . . . . . . . . . . . . . . . . . . . 74

Application manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

File manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Voice commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

[ x ]

FCC DRAFT

PRELIMINARY

Device manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

10 Personalization. . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Themes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Go to . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

11 Extras. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Converter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Voice recorder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Memory card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Wallet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

12 Instant messaging (IM) (network service) . . . . . . . . 94

IM service provider icons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Before using IM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

IM settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

IM conversations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

IM contacts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Group chat sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Log off service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

13 Web (mobile browser) . . . . . . . . . . . . . . . . . . . . . 104

[ xi ]

FCC DRAFT

PRELIMINARY

Basic steps for web access. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Browser service set-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Make a connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

Bookmarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

Browse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

End a connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Clear the cache. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Browser settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

14 Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Bluetooth connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

USB connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

Connection manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Connect your phone to a computer . . . . . . . . . . . . . . . . . . . . .116

Use the CD-ROM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

15 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . 119

SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

Memory low . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Different ways to store data . . . . . . . . . . . . . . . . . . . . . . . . . . .120

Phone display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

Bluetooth connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

Multimedia messaging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

Browser services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

[ xii ]

FCC DRAFT

PRELIMINARY

PC connectivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

Application not responding . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

16 Reference information . . . . . . . . . . . . . . . . . . . . . 123

Battery information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Enhancements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Enhancements, batteries, and chargers . . . . . . . . . . . . . . . . . . 124

Care and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

Additional safety information . . . . . . . . . . . . . . . . . . . . . . . . . . 126

Emergency calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

Certification information (SAR). . . . . . . . . . . . . . . . . . . . . . . . . 129

Nokia 7610 technical information . . . . . . . . . . . . . . . . . . . . . . 131

Message from the CTIA . . . . . . . . . . . . . . . . . . . . 137

Message from the FDA. . . . . . . . . . . . . . . . . . . . . 141

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

FOR YOUR SAFETY

FCC DRAFT

PRELIMINARY

1 FOR YOUR SAFETY

Read these simple guidelines. Not following them may be dangerous or illegal.

Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle

while driving. Your first consideration while driving should be road

safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could

affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in

aircraft.

SWITCH OFF WHEN REFUELING

Don't use the phone at a refueling point. Don't use near fuel or

chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don't use the phone where blasting is in

progress.

USE SENSIBLY

Use only in the normal position as explained in the product

documentation. Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

FCC DRAFT

PRELIMINARY

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect

incompatible products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all

important information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed

safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the End key as

many times as needed to clear the display and return to the main

screen. Enter the emergency number, then press the Send key. Give your

location. Do not end the call until given permission to do so.

•ABOUT YOUR PHONE

The Nokia 7610 phone comes in two model types—the Nokia 7610 phone, which is

approved for use in 900, 1800, and 1900 MHz GSM networks, and the Nokia 7610 b

phone, which is approved for use in 850, 1800, and 1900 MHz GSM networks.

To view your model type, refer to the information label under the battery. For more

information about where this label is located, see “Find the phone label” on page 5.

When using the features in this device, obey all laws and respect privacy and

legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock,

the phone must be switched on. Do not switch the device on when wireless

phone use may cause interference or danger.

•NETWORK SERVICES

To use the phone you must have service from a wireless service provider. Many of

the features in this device depend on features in the wireless network to function.

These Network Services may not be available on all networks, or you may have to

make specific arrangements with your service provider before you can utilize

FOR YOUR SAFETY

FCC DRAFT

PRELIMINARY

Network Services. Your service provider may need to give you additional

instructions for their use and explain what charges will apply. Some networks may

have limitations that affect how you can use Network Services. For instance, some

networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, they will not appear on your device menu. Contact

your service provider for more information.

When using the features in this device, obey all laws and respect privacy and

legitimate rights of others.

•SHARED MEMORY

The following features in this device may share memory: contacts, text messages,

e-mail messages, multimedia messages, instant messages, images and ringing

tones, video recorder, RealPlayer, calendar and to-do notes, themes, and

downloaded applications. The use of one or more of these features may reduce the

memory available for the remaining features sharing memory. For example, saving

many images may use all of the available memory. Your phone may display a

message that the memory is full when you try to use a shared memory feature. In

this case, delete some of the information or entries stored in the shared memory

features before continuing. Some of the features may have a certain amount of

memory specially allotted to them in addition to the amount of memory shared

with other features.

FCC DRAFT

PRELIMINARY

2 General information

Congratulations on your purchase of a Nokia mobile phone. Your phone provides

many functions that are practical for daily use, such as a digital camera, a video

recorder, messaging, e-mail, a clock, an alarm clock, a calculator, and a calendar.

Your phone can connect to a PC, laptop, or other device using a data cable, or

Bluetooth technology. For more information on connectivity, refer to the User Guide

for Nokia PC Suite on the CD-ROM supplied with your phone. The User Guide for

Nokia PC Suite, Nokia PC Suite, and all related software can be downloaded from

the U.S. Mobile Phone products section of www.nokia.com.

•REGISTER YOUR PHONE

Make sure to register your phone at www.warranty.nokiausa.com or

1-888-NOKIA-2U (1-888-665-4228) if you need to call the center or have your

phone repaired.

•E-NEWSLETTERS

When you register your phone, you may sign up for Nokia's e-newsletter Nokia

Connections. You will receive tips and tricks on using your phone, accessory

information, and special offers.

•FOLLOW GRAPHIC CLUES

This guide uses certain icons to alert you to important information.

Note: Explains a feature or points out an important concept.

Important: Indicates critical information on using a feature.

Warning: Helps you avoid personal injury, damage to the phone, or

property damage.

General information

FCC DRAFT

PRELIMINARY

•FIND THE PHONE LABEL

If you ever need to call the Nokia

Customer Care Center or your service

provider, you will need to provide

specific information about your

phone. This information is located on

the phone labels, which are found on

the back of the phone beneath the

battery.

The inside cover of this guide has a

chart in which you can enter the

information from your phone label so

that you can refer to it easily.

•CONTACT NOKIA

To help Nokia promptly answer your questions, please have the following

information available before contacting the Nokia Customer Care Center (see “Find

the phone label” on page 5 to locate this information):

•Your phone model number (such as Nokia 7610 or Nokia 7610 b)

•Type number (such as RH-51)

•IMEI number

•Your local zip code

•The phone or enhancement in question

Nokia Customer Care Center, USA Customer Care, Canada

Nokia Mobile Phones

7725 Woodland Center Blvd.

Suite #150

Tampa, Florida 33614

Tel:1-888-NOKIA-2U

(1-888-665-4228)

Fax:1-813-249-9619

For TTY/TDD users: 1-800-24-NOKIA

(1-800-246-6542)

Nokia Products Ltd.

601 Westney Road South

Ajax, Ontario L1S 4N7

Tel:1-888-22-NOKIA

(1-888-226-6542)

Website: www.nokia.ca

Information label under battery

FCC DRAFT

PRELIMINARY

•ACCESSIBILITY SOLUTIONS

Nokia is committed to making mobile phones easy to use for all users including

those with disabilities. For more information, visit www.nokiaaccessibility.com.

For more information on accessibility enhancements, see also “Phone adapter

HDA-10 accessibility enhancement” on page 125.

Getting started

FCC DRAFT

PRELIMINARY

3 Getting started

To begin using your Nokia 7610 phone, a SIM card must be inserted into the phone.

You may also use a memory card with the phone. Before you attempt to insert or

remove a SIM card or memory card, review the following procedures to become

familiar with the inside of your phone.

“Nokia 7610 phone at a glance” on page v identifies other features on your phone.

•REMOVE THE BACK COVER

Note: Before removing the phone cover,

always switch off the power and

disconnect the phone from the charger

or any other device. Always store and use

the phone with the cover attached.

1To open the cover, with the back of the phone

facing you, press the locking catch in the

direction of the arrow (1).

2While pressing the locking catch, slide the back cover off of the phone (2).

3Remove the battery from the phone if necessary.

•INSERT THE SIM CARD

Keep all SIM cards out of the reach of small children. For availability and

information on using SIM card services, contact your SIM card vendor. This may be

the service provider, network operator, or other vendor. For a better understanding

of your SIM card, see “SIM card” on page 119.

1Locate the SIM card slot.

2Open the SIM card holder by doing the

following:

•Slide the holder in the open direction

(1).

•Lift the holder up (2).

3Position the bottom of the SIM card in the

top of the holder, and carefully slide the

SIM card down into the holder, until the

bottom of the card fits in the base of the

slot.

SIM card holde

SIM card slot

FCC DRAFT

PRELIMINARY

Make sure that the bevelled corner

on the SIM card is at the top of the

holder and that the gold-colored

contact area on the card is facing the

inside of the phone.

4Secure the SIM card by doing the

following:

•Fold the SIM card holder back

down into the phone (1).

•Slide the holder into the closed position (2) until it firmly snaps into place.

•INSERT THE MEMORY CARD

The Nokia 7610 phone uses a reduced size multimedia card (RS-MMC). Only use

RS-MMCs with this device. For more information on the memory card adapter, see

“Attach and remove the memory card adapter” on page 88.

Other memory cards, such as secure digital (SD) cards, do not fit in the memory

card slot and are not compatible with this device. Attempts to use a noncompatible

memory card may damage the memory card as well as the phone, and data stored

on the noncompatible card may be corrupted. See “Memory card” on page 87 for

further information.

Keep all memory cards out of the reach of small children.

See “Remove the back cover” on page 7 for details on removing the phone cover.

1Locate the memory card slot.

2Insert the top of the memory card under

the hood at the right side of the slot and

carefully slide the memory card to the

right until it fits in the slot.

Make sure that the bevelled corner on

the memory card is facing toward the

bottom right side of the phone and that

the gold-colored contact area on the

card is facing downward.

3Press the memory card into place.

bevelled corner

Memory card slot

bevelled corner

Getting started

FCC DRAFT

PRELIMINARY

•INSERT THE BATTERY

Warning: Use only batteries

approved by Nokia for use with this

particular model. The use of any other

types may invalidate any approval or

warranty, and may be dangerous.

1Align the gold-colored contacts of the

battery with the corresponding

connectors on the phone, and push the

opposite end of the battery until it snaps into place.

2Slide the cover back onto the phone. You will hear it click into place.

•CHARGE THE BATTERY

Warning: Use only chargers approved by Nokia for use with this particular

model. The use of any other types may invalidate any approval or warranty,

and may be dangerous.

Check the model number of any charger before

use with this device. This device is intended for

use when supplied with power from ACP-12.

1Connect the charger to an ac wall outlet.

2Connect the power cord from the charger to

the base of the phone. (You will hear it click

into place.)

The battery indicator bar starts scrolling.

Note that you can use the phone while

charging. When the battery is fully charged, the bar stops scrolling.

3Disconnect the charger from the ac outlet and from the phone.

See "Battery information" on page 123. See also “Other compatible Nokia

enhancements” on page 124 for a list of other compatible chargers.

FCC DRAFT

PRELIMINARY

•SWITCH THE PHONE ON OR OFF

Press and hold the Power key.

After it is switched on, the phone goes through

various start-up stages while it is loading software.

It may be more than thirty seconds before the

phone is ready for use.

•ATTACH THE WRIST STRAP

You can attach the wrist strap at the top left corner or

bottom right corner of the phone. Thread the strap

through the holder and tighten it.

•TIPS ON EFFICIENT OPERATION

Your phone has an internal antenna on the back of the

phone above the camera lens.

•IF THE PHONE REQUESTS A PIN CODE

The PIN code is usually supplied with the SIM card.

Note: Only connect the strap to one fixture

at a time. Use only Nokia approved

enhancements.

Note: As with any other radio transmitting

device, do not touch the antenna

unnecessarily when the device is switched

on. Contact with the antenna affects call

quality and may cause the phone to operate

at a higher power level than otherwise

needed. Avoiding contact with the antenna

area when operating the phone optimizes

the antenna performance and the battery

life.

Getting started

FCC DRAFT

PRELIMINARY

Key in the code (displayed as ****), and press OK. For more information on PIN

codes, see “Security” on page 69.

•IF THE PHONE REQUESTS A LOCK CODE

Key in the lock code (displayed as *****), and press OK. The factory setting for the

lock code is 12345. For more information on security codes, see “Security” on

page 69.

•SET THE TIME AND DATE

If you are prompted to enter the time and date when you turn your phone on, use

the number keys 0–9 to key in the current time and then the date. Press OK to

accept the settings. See also “Date and time” on page 69.

•MAKE A CALL

1In the standby mode, key in the phone number, including the area code.

2If you make a mistake, press the Clear key to clear numbers.

3Press the Send key and wait for the answer.

4Press the End key to finish the call or to cancel the call attempt.

•STANDBY MODE

Indicators are shown when the phone

is ready for use, with no characters

keyed in. In this state, the phone is in

the standby mode.

The graduated bar (A) shows the

signal strength of the cellular network

at your current location. The higher

the bar, the stronger the signal. The

antenna symbol is replaced with

the GPRS symbol when the GPRS

connection has been set to When

available and a connection is available

in the network or in the current cell.

See "GPRS" on page 68.

FCC DRAFT

PRELIMINARY

The area to the right of the signal bar (B) shows an analog or a digital clock. See

"Date and time" on page 69.

The area above the date (C) indicates in which cellular network the phone is

currently being used.

The graduated bar (D) shows the battery charge level. The higher the bar, the more

power left in the battery.

The navigation bar (E) shows the currently active profile. If the selected profile is

Normal, the current date is displayed instead of the profile name.

Current shortcuts (F) are assigned to the Left and Right selection keys.

The background image (G) may be any image you select in the standby mode. See

"Themes" on page 81.

Your phone has a screen saver. If there are no actions for five minutes, the display

is cleared and a screen saver becomes visible. To deactivate the screen saver, press

any key. You can also modify the screen saver display and the amount of time that

elapses before the screen saver starts. See “Themes” on page 81 and “Standby

mode” on page 64.

•ICONS

Several icons may be displayed while the phone is in the standby mode. The icons

are related to activity, data connections, enhancements, or voice volume.

Activity indicators

One or more of the following icons may be shown when the phone is in the standby

mode:

You have received new messages to Inbox in Messaging. If the indicator

is blinking, the phone memory is low, and you must delete some data.

See "Memory low" on page 119.

You have received one or more voice messages. See "Call voice mail" on

page 18.

There are messages waiting to be sent in Outbox. See "Outbox" on

page 57.

The ringing type has been set to Silent,message alert tone toOff, and

IM alert tone to Off in the currently active profile. See "Profiles" on

page 80.

The phone keypad is locked. To unlock, press the Left selection key and

then the * key.

Getting started

FCC DRAFT

PRELIMINARY

Data connection indicators

When an application is establishing a data connection, one of the indicators below

blinks in the standby mode. When an indicator is shown continuously, the

connection is active.

Enhancement indicators

Voice volume indicators

You have an active alarm. See "Clock" on page 86. See "Calendar" on

page 33.

A Bluetooth connection is active.

All call forwarding is turned on.

Indicates that all calls to the phone are forwarded to voice mail.

See "Call forwarding (network service)" on page 21. If you have two

phone lines, the forward indicator for the first line is and for the

second line . See “Line in use (network service)” on page 65.

You can make calls using phone line 2 only (network service). See "Line

in use (network service)" on page 65.

Data call

GPRS connection. The GPRS symbol is shown instead of the antenna

symbol when there is an active GPRS connection, when there are

multiple GPRS connections, and for when the GPRS connection is

put on hold during voice calls.

Bluetooth connection

USB connection

A headset is connected

A loopset is connected

Earpiece mode

Loudspeaker mode

FCC DRAFT

PRELIMINARY

•MENU

Press the Menu key to display the main menu. In the menu, you can

access all the applications in your phone.

Menu options are Open,List view or Grid view,Move,Move to folder,New folder,

Rename, App. downloads,Memory details,Help, and Exit.

Move in the menu

Use the scroll key as follows to navigate the

menu:

•Scroll up by pressing the scroll key up (1).

•Scroll down by pressing the scroll key

down (2).

•Scroll left by pressing the scroll key left

(3).

•Scroll right by pressing the scroll key right

(4).

•Press the center of the scroll key to open a selected application or folder (5).

Close applications

Backstep by pressing Back or Exit as many times as needed to return to the standby

mode, or select Options > Exit.

If you press the End key, the phone returns to the standby mode and the

application is left open in the background. Pressing the End key will always end a

call, even if another application is active and displayed.

When you switch the phone off correctly, using the Power key, the phone will

attempt to save any unsaved data and close any applications that are still open.

Hence the process may take a short time.

Rearrange the menu

You can rearrange the menu icons as required. You can place more rarely used

applications in folders and move applications that you use more often from a folder

to the main menu. You can also create new folders.

1Scroll to the item you want to move, and select Options > Move.

A check mark is placed beside the application.

2Scroll to where you want the application, and select OK.

To move an item to a folder or from a folder to the menu, see “Common actions for

all applications” on page 15.

Getting started

FCC DRAFT

PRELIMINARY

Switch between applications

If you have several applications open and want to

switch from one application to another, press and

hold the Menu key. The application switching

window opens showing a list of applications that

are currently open. Scroll to an application and

press the middle of the scroll key to go to it.

If memory is getting low, the phone may close some

applications. The phone saves any unsaved data

before an application is closed.

•OPTIONS LISTS

Options lists tell you which commands are available in different views and

situations. The available commands change depending on the view you are in. In

some situations, when you press the middle of the scroll key, a shorter options list

appears listing the main commands available in the view.

•COMMON ACTIONS FOR ALL APPLICATIONS

Open items for viewing—When you are viewing a list of files or folders and want

to open an item, scroll to the item and press the middle of the scroll key, or select

Options > Open.

Edit items—To change the contents of an item, open it for viewing and select

Options > Edit. Use the scroll key to scroll through all fields of the item.

Rename items—To give an item a new name, scroll to the file or folder and select

Options > Rename.

Remove, delete items—Scroll to the item and select Options > Delete, or press the

Clear key. To delete many items at a time, you need to mark them.

Mark an item—There are several ways to select items in a list.

•To select one item at a time, scroll to it, and select Options > Mark/Unmark >

Mark; or press the Edit key and the scroll key at the same time. A check mark

is placed next to the item.

•To select all items in the list, select Options > Mark/Unmark > Mark all.

Mark multiple items—Press and hold the Edit key; then press the scroll key down

or up. As the selection moves, a check mark is placed next to the items. To end the

selection, stop scrolling with the scroll key, and release the Edit key.

•After you have selected all the items you want, move or delete them by

FCC DRAFT

PRELIMINARY

selecting Options > Move to folder or Delete.

•To unmark an item, scroll to it, and select Options >Mark/Unmark > Unmark;

or press the Edit key and the scroll key at the same time.

Create folders—To create a new folder, select Options >New folder. You are asked

to give a name to the folder (up to 35 letters).

Move items to a folder—To move items to a folder or between folders, select

Options > Move to folder (not shown if there are no folders available). When you

select Move to folder, a list of available folders opens and you can also see the root

level of the application (for moving an item out of a folder). Select the location to

which you want to move the item, and select OK.

Send items—To send items to compatible devices, scroll to the item that you want

to send, and select Options > Send > Via multimedia or Via Bluetooth.

•If you select to send the item in a multimedia message, an editor opens. Press

the middle of the scroll key to select the recipients from the contacts directory

or write the phone number or e-mail address of the recipient in the To field.

Add text or sound and select Options > Send. See "Write and send messages"

on page 50.

•If you select Via Bluetooth, see “Send data by Bluetooth connection” on

page 112.

•SEARCH FOR ITEMS

You can search for a name, file, folder, or shortcut by using the search

field. In some situations the search field is not visible automatically, but

you can activate it by selecting Options > Find or just by starting to key in letters.

1To search for an item, start to key in text in the search field.

The phone immediately starts to search for matches and moves the selection

to the best match.

2To make the search more accurate, key in more letters and the selection moves

to the item that best matches the letters.

3When the correct item is found, press the middle of the scroll key to open it.

•VOLUME CONTROL

When you have an active call or are listening to a sound, scroll right or left to

increase or decrease the volume level, respectively. See also “Voice volume

indicators” on page 13.

Getting started

FCC DRAFT

PRELIMINARY

•LOUDSPEAKER

The loudspeaker allows you to speak and listen to the phone from a short distance

without having to hold the phone to your ear. The loudspeaker can be used during

a call, with sound and video applications, and when viewing multimedia messages.

Sound and video applications use the loudspeaker by default. Using the

loudspeaker makes it easier to use other applications while in a call.

To activate the loudspeaker during an active call, press

Loudsp. or select Options > Activate loudsp. A tone is played,

is shown in the navigation bar, and the volume indicator

changes.

The loudspeaker cannot be activated when a headset is connected to the phone.

To turn off the loudspeaker during an active call, press Handset or select Options >

Activate handset.

Important:Do not hold the phone near your ear when the loudspeaker is

in use because the volume may be extremely loud.

•KEYGUARD

Use the keyguard (keypad lock) feature to help prevent accidental key presses.

In the standby mode, press the Left selection key; then quickly press the *key.

When the keys are locked, appears on the display. Press the Left

selection key; then quickly press the *key to unlock the keys.

When keyguard is on, press the Send key to answer a call. During a call, the phone

can be operated in the normal way.

When the keyguard is on, calls still may be possible to the official emergency

number programmed into your phone. Enter the emergency number (for example,

911) and press the Send key.

FCC DRAFT

PRELIMINARY

4 Your phone

•MAKE A CALL

1In the standby mode, key in the phone number, including the area code.

Scroll right or left to move the cursor. Press the

Clear key to remove a number.

For international calls, press the * key twice for

the international prefix (the + character

replaces the international access code), and key

in the country code, the area code without 0,

and the phone number.

Calls described here as international may be

made between regions of the same nation.

2Press the Send key to call the number.

3Press the End key to end the call (or to cancel

the call attempt).

Pressing the End key will always end a call, even if another application is active

and displayed.

You can make a call using your voice so that you do not need to key in the number.

See "Voice dialing" on page 26.

Use Contacts to make a call

1To open the contacts directory, select Menu > Contacts, or press the middle

of the scroll key in the standby mode.

2To find a contact, scroll to the desired name, or key in the first letters of the

name. The search field opens automatically and matching contacts are listed.

3Press the Send key to start the call.

If the contact has more than one phone number, scroll to the number and

press the Send key to start the call.

Call voice mail

Voice mail (network service) is an answering service where callers can leave voice

messages.

•To call voice mail, press the 1key and the Send key in the standby mode, or

press and hold the 1key.

•If the phone asks for the voice mail number, key it in and press OK. Obtain this

Your phone

FCC DRAFT

PRELIMINARY

number from your service provider.

To forward calls to your voice mail, see “Call forwarding (network service)” on

page 21.

Each phone line may have its own voice mail number. See "Line in use (network

service)" on page 65.

CHANGE THE VOICE MAIL NUMBER

To change the phone number of your voice mail, select Menu > Tools >

Voice mail > Options > Change number. Key in the number (obtained from your

service provider), and press OK.

1-touch dialing

To view the 1-touch dialing grid, select Menu > Tools > 1-touch.

To assign a phone number to one of the 1-touch dialing keys (2–9), select

Options > Assign. See also “Assign 1-touch dialing keys” on page 27. To call the

number in the standby mode, press the corresponding 1-touch dialing key and the

Send key.

To turn the 1-touch dialing function on, select Menu > Settings > Call >

1-touch dialing > On. If the 1-touch dialing function is set to On, press and hold

the corresponding 1-touch dialing key until the call is started.

Make a conference call (network service)

Conference calling is a network service that allows

you to make a conference call with up to six

participants, depending on network limitations.

1Make a call to the first participant.

2To make a call to a new participant, select

Options > New call.

3Key in or search the memory for the phone

number of the participant and press OK.

The first call is automatically put on hold.

4When the new call has been answered, select

Options > Conference to join the first

participant in the conference call.

5To end the active conference call, press the End key.

To add a new person to the call, repeat step 2.

FCC DRAFT

PRELIMINARY

To have a private conversation with one of the participants, select Options >

Conference > Private. Scroll to the desired participant and press Private. The

conference call is put on hold in your phone, and the other participants can still

continue talking with each other while you have a private discussion with one

participant only. Once you have finished the private conversation, select Options >

Conference to return to the conference call.

To drop one participant from the conference call, select Options > Conference >

Drop participant; then scroll to the participant and press Drop.

The quickest way to make a new call is to dial the number, and press the Send key

to start the call. The existing call is automatically put on hold.

•ANSWER A CALL

To answer an incoming call, press the Send key.

To end the call, press the End key.

If you do not want to answer a call, press the

End key.

When a call comes in, press Silence to quickly mute

the ringing tone.

Options during a call

Press Options during a call for some of the following

options: Answer,Decline,Swap,Activate loudsp. or

Activate handset, End active call,End all calls,Hold

or Unhold,Mute or Unmute,Conference,Transfer,Send touch tones, and Help.

You might not have all of these options. Contact your service provider for more

details.

Loudspeaker and Handset may be displayed as options for the Right selection key

and can be used as shortcuts for Activate handsfree and Deactivate handsfree,

respectively.

Swap is used to switch between the active call and the call on hold.

Transfer is used to connect an incoming call or a call on hold with an active call

and to disconnect yourself from both calls.

Send touch tones is used to send DTMF tone sequences, for example, passwords or

bank account numbers:

1Key in the digits with the 0–9 keys.

Each keystroke generates a DTMF tone, which is transmitted while the call is

active. Press the *key repeatedly to produce *,p (inserts a pause of

Your phone

FCC DRAFT

PRELIMINARY

approximately two seconds before, or between DTMF characters), and w (if you

use this character, the remaining sequence is not sent until you press the

Send key again during the call). Press the #key to produce #.

2To send the tone, press OK.

Call waiting (network service)

If you have activated the call waiting service, the network will notify you of a new

incoming call while you have a call in progress.

1During a call, press the Send key to answer the waiting call.

The first call is put on hold.

2To switch between the two calls, press Swap.

3To end the active call, press the End key, or to end both calls at the same time,

select Options > End all calls.

Call forwarding (network service)

When this network service is activated, you can direct your incoming calls to

another number, for example, to your voice mail number. For details, contact your

service provider.

Select Menu > Settings > Call forwarding.

•Select one of the forwarding options, for example, select If busy to forward

voice calls when your number is busy or when you reject incoming calls.

•Select Options > Activate to turn the forwarding setting on, Cancel to turn

the forwarding setting off, or Check status to check whether the forwarding

is activated or not.

•To cancel all active forwarding, select Options > Cancel all forwarding.

See also “Activity indicators” on page 12.

Call restriction and call forwarding cannot be active at the same time. See "Call

restriction (network service)" on page 72.

•CALL LOG

Select Menu > Log.

You can use the log to monitor phone calls, text messages, data calls, and packet

data connections registered by the phone. Filter the log to view just one type of

event and create new contact cards based on the log information.

FCC DRAFT

PRELIMINARY

Connections to your remote mailbox, multimedia messaging center, or browser

pages are shown as data calls or packet data connections in the general

communications log.

Recent calls log

Select Menu > Log > Recent calls.

The phone registers the phone numbers of missed, received, and dialed calls, and

the date and time of your calls. The phone registers missed and received calls only

if the network supports these functions and if the phone is switched on and is

within the network service area.

Options in the Missed,Received, and Dialed views are Call, Create message,Use

number,Delete,Clear list,Add to Contacts,Help, and Exit.

MISSED CALLS AND RECEIVED CALLS

To view a list of the last 20 phone numbers received but not answered (network

service), select Log > Recent calls > Missed calls.

If you receive indication of missed calls while in the standby mode, press Show to

access the list of numbers. To call back, scroll to the number or name you want to

call and press the Send key.

To view a list of the 20 numbers for calls most

recently accepted (network service), select Log >

Recent calls > Received calls.

DIALED NUMBERS

To view the 20 phone numbers for the most recently

called or attempted, select Log > Recent calls >

Dialed numbers.

ERASE RECENT CALL LISTS

To clear all recent call lists, select Options > Clear

recent calls in the Recent calls main view.

To clear one of the call logs, open the log you want

to erase and select Options > Clear list.

To clear an individual event, open a log, scroll to the event, and press the Clear key.

Confirm by pressing Yes.

Call timers

Select Menu > Log > Call timers to view the duration of your incoming and

outgoing calls.

Note: The actual time invoiced for calls by your service provider may vary,

depending upon network features, rounding-off for billing, and so forth.

Your phone

FCC DRAFT

PRELIMINARY

To erase call duration timers, select Options > Clear timers. For this you need the

lock code. See "Security" on page 69.

Note:Some timers may be reset during service or software upgrades.

GPRS data counter

Select Menu > Log > GPRS counter.

The GPRS data counter allows you to check the amount of data sent and received

during packet data (GPRS) connections. This may be helpful if your service provider

charges for GPRS connections based on the amount of data sent and received. The

actual amount invoiced by your service provider may vary depending on rounding,

taxes, or other factors.

View the general log

Select Menu > Log and scroll right.

In the general log, the sender or recipient name,

phone number, name of the service provider, or

access point is displayed for each communication

event.

Events such as a text message sent in more than one

part and packet data connections, are logged as one

communication event.

FILTER THE GENERAL LOG

1Select Options > Filter. A list of filters opens.

2Scroll to a filter and press Select.

ERASE THE CONTENTS OF THE GENERAL LOG

To erase all the log contents, recent calls log, and messaging delivery reports

permanently, select Options > Clear log. Confirm by pressing Yes.

PACKET DATA COUNTER AND CONNECTION TIMER

To view how much data, measured in kilobytes, has been transferred and how long

a certain GPRS connection has lasted, scroll to an incoming or outgoing event

labeled GPRS and select Options > View details.

Log settings

Select Menu > Log > Options > Settings to open the list of settings.

Log duration—The log events remain in the phone memory for a set number of days

after which they are automatically erased to free memory.

FCC DRAFT

PRELIMINARY

If you select No log, all the log contents, recent calls log, and messaging delivery

reports are permanently deleted.

Show call duration—Set to Yes or No. See "Call timers" on page 22.

Personal information

FCC DRAFT

PRELIMINARY

5 Personal information

•CONTACTS

To open Contacts, press the middle of the scroll key in the standby

mode, or select Menu > Contacts.

In Contacts, you can store and manage contact information, such as names, phone

numbers, and addresses.

You can also add a personal ringing tone, voice tag, or a thumbnail image to a

contact card. You can create contact groups, which allow you to send text

messages or e-mail to many recipients with compatible devices at the same time.

Options in Contacts are Open,Call,Create message,New contact,Open

conversation,Edit,Delete,Duplicate,Add to group,Belongs to groups,Mark/

Unmark,Copy to SIM direct.,Go to web address,Send,Contacts info,SIM directory,

Service numbers,Settings,Help, and Exit.

Create and edit contact cards

1Open Contacts and select Options > New contact. An empty contact card

opens.

2Fill in the fields you want and press Done.

The contact card is saved in the phone memory and closed, after which you

can see it in the contacts directory.

To edit contact cards, see “Common actions for all applications” on page 15.

Options when editing a contact card are Add thumbnail or Remove thumbnail,Add

detail,Delete detail,Edit label,Help, and Exit.

To delete contact cards, in the contacts directory, scroll to the contact card and

select Options > Delete.

To attach a small thumbnail image to a contact card, open a contact card, and

select Options > Edit > Options > Add thumbnail. The thumbnail image is also

shown when the contact is calling you. After you attach a thumbnail image to a

contact card, select Add thumbnail to replace the image with a different

thumbnail or Remove thumbnail to remove the thumbnail from the contact card.

To assign default numbers and addresses to a contact card, open the contact card,

and select Options > Defaults. A pop-up window opens, listing the different

options.

FCC DRAFT

PRELIMINARY

Copy between SIM card and phone memory

To copy names and numbers from a SIM card to your phone, open Contacts, select

Options > SIM directory, scroll to the names you want to copy, and select

Options > Copy to Contacts.

If you want to copy a phone, fax, or pager number from Contacts to your SIM card,

select Contacts, open a contact card, scroll to the number, and select Options >

Copy to SIM direct.

Add a ringing tone for a contact card or group

You can set a ringing tone for each contact card and group. When that contact or

group member calls you, the phone plays the chosen ringing tone (if the caller’s

telephone number is sent with the call and your phone recognizes it).

1Press the middle of the scroll key to open a contact card; or scroll right to go

to groups, and select a contact group.

2Select Options > Ringing tone.

A list of ringing tones opens.

3Use the scroll key to select the ringing tone you wish to use for the contact or

group, and press Select.

4To remove the ringing tone, select Default tone from the list of ringing tones.

For an individual contact, the phone will always use the ringing tone that was

assigned last. If you first change a group ringing tone and then the ringing tone of

a single contact that belongs to that group, the ringing tone of the single contact

is used.

Voice dialing

You can make a phone call by saying a voice tag that has been added to a contact

card. Any spoken words can be a voice tag.

When recording, hold the phone at a short distance away from your mouth. After

the starting tone, say clearly the word, or words, you want to record as a voice tag.

REQUIREMENTS FOR VOICE TAGS

Before using voice dialing, note the following:

•Voice tags are not language-dependent. They are dependent on the speaker's

voice.

•You must say the name exactly as you said it when you recorded it.

•Voice tags are sensitive to background noise. Record voice tags, and use them

in a quiet environment.

•Very short names are not accepted. Use long names, and avoid similar names

Personal information

FCC DRAFT

PRELIMINARY

for different numbers.

Note: Using voice tags may be difficult in a noisy environment or during

an emergency, so you should not rely solely upon voice dialing in all

circumstances.

ADD A VOICE TAG TO A PHONE NUMBER

Voice tags can only be added to phone numbers stored in phone memory. See "Copy

between SIM card and phone memory" on page 26.

1In Contacts, scroll to the contact to which you want to add a voice tag, and

press the middle of the scroll key to open the contact card.

2Scroll to the number to which you want to add the voice tag, and select

Options > Add voice tag.

3Press Start to record a voice tag.

4After the starting tone, clearly say the words you want to use as a voice tag.

After recording, the phone plays the recorded tag and Playing voice tag is

displayed.

When the voice tag has been successfully saved, Voice tag saved is displayed

and a beep sounds. A symbol can be seen next to the number in the contact

card.

To replay, erase, or change a voice tag, scroll to the item that has a voice tag

(indicated by ), and select Options > Voice tag > Playback,Delete, or Change.

MAKE A CALL USING A VOICE TAG

1In the standby mode, press and hold the Right selection key.

A short tone is played and Speak now is displayed.

2When you make a call by using a voice tag, hold the phone at a short distance

from your mouth, and say the voice tag clearly.

The phone plays the original voice tag, displays the name and number, and

dials the number of the recognized voice tag.

If the phone plays the wrong voice tag or if you want to retry voice dialing, press

Retry.

Voice dialing should not be used when a data call or a GPRS connection is active

because the voice call will interrupt the connection.

Assign 1-touch dialing keys

1-touch dialing is a quick way to call frequently used numbers. You can assign

1-touch dialing keys to eight phone numbers. Number 1 is reserved for voice mail.

FCC DRAFT

PRELIMINARY

1Open the contact card for which you want a 1-touch dialing key, and scroll to

the phone number you want to add to 1-touch dialing.

2Select Options > Assign 1-touch no.

The 1-touch dialing grid opens, showing you the numbers from 2–9.

3Scroll to a number and press Assign. When you return to the contact

information view, the 1-touch dialing icon is displayed next to the number.

4To call the contact by 1-touch dialing, go to the standby mode, and press the

1-touch dialing key and Send key, or press and hold the 1-touch dialing key.

View subscribed contacts

Select Menu > Contacts, and scroll to the second tab to open the subscribed

contacts list. This list allows you to view presence data, including availability and

IM status, for all subscribed contacts. See also “Presence (network service)” on

page 29 and “Instant messaging (IM) (network service)” on page 94.

Options in the subscribed contacts view are Open,Call,Create message,Switch

tracking on,Open conversation,Unsubscribe,Subscribe new,Mark/Unmark,My

presence,Help, and Exit. If you are not logged in to the presence service, you will

see only a few of these options.

Manage contact groups

Select Menu > Contacts, and scroll to the third tab to open the contact groups list.

Options in the groups list view are Open,New group,Delete,Rename,Ringing tone,

Contacts info,Settings,Help, and Exit.

CREATE CONTACT GROUPS

1In the contacts directory, scroll to the groups tab.

2Select Options > New group.

3Write a name for the group, or use the default name Group 1, and press OK.

ADD MEMBERS TO A GROUP

1In the contacts directory, scroll to the contact you want to add to a group, and

select Options > Add to group.

A list of available groups opens.

2Select a group, and press the middle of the scroll key to add the contact.

Personal information

FCC DRAFT

PRELIMINARY

•PRESENCE (NETWORK SERVICE)

Select Menu > Presence.

Options in Presence are Open,My availability,Viewers,Update presence,Login or

Logout,Settings,Help, and Exit.

Use the presence service to inform others when, where, and how you want to be

contacted. Presence allows you to view and create a dynamic profile and share

information or control services. Presence information is visible to other users of the

service and can include your availability, whether you prefer for people to call or

send messages, where you are, and what you are doing.

Before you can use the presence service, you must choose a service provider and

save the settings of that service. You may receive the settings in a special text

message, called a smart message, from the service provider that offers the presence

service. See "Smart messages" on page 54. For more information, contact your

service provider.

Select Options > Login or Logout to log in and out of the presence service.

The presence application on your phone allows you to change your own published

information and manage who is authorized to see your presence. To view the

presence information of others, you must use the Contacts application. See "View

subscribed contacts" on page 28.

Change your availability

Select Options > My availability and one of the

following:

Available—You are available for people to call or

send you messages, for example, your phone is set to

Normal profile. See "Profiles" on page 80.

Busy—You may be available for people to call or

send you messages, for example, your phone is in

Meeting profile.

Not available—You are not available for people to

call or send you messages, for example, your phone

is in Silent profile.

Change your presence information

You can set up public, private, and blocked presence information and define who

can view your information.

FCC DRAFT

PRELIMINARY

PUBLIC PRESENCE

Select Menu > Presence > Public pres. to change your public presence

information. This information is available to anyone you have not blocked. Select

Options and one of the following:

My availability—Select Available,Busy, or Not available.

Viewers—Open the Current viewers list to see the names, phone numbers, or user

IDs of the viewers whom you do not allow to view your private presence messages,

but who are currently viewing your public presence. You can scroll to a viewer,

press Options, and select from the following options:

•Add to private list—Allow the viewer to also see your private presence.

•Block—Prevent the viewer from seeing your presence information.

•Add to contacts—Add the viewer to your contacts directory.

•Refresh lists—Update the viewer lists. This option is only available when you

are not logged in to the presence service.

Update presence—Update your presence information to the presence service.

Settings—Manage the publishing of your presence information.

PRIVATE PRESENCE

Select Menu > Presence > Private pres. to change your private presence

information. This information is only available to those whom you have authorized

to view your private information. Select Options and one of the following:

My availability—Select Available,Busy, or Not available.

My presence msg.—Write a text message of up to 40 characters to describe your

current availability.

My presence logo—Add a logo to your availability information. Logo files are

stored in Gallery. See "Gallery" on page 42.

Viewers—Open your private presence viewers list to see the names, phone numbers,

or user IDs of the viewers whom you allow to view your private presence messages.

You can scroll to a viewer, press Options, and select from the following options:

•Add new—Add a new viewer manually or from your contacts directory. You

can only select a contact who has a user ID in the contact card.

•Block—Prevent the viewer from seeing your presence information.

•Add to contacts—Add the viewer to your contacts directory.

•Remove from list—Remove the viewer from the private list. This option is

available also when you mark several viewers in the list. If the list is empty, the

option is not available. You can also scroll to a viewer and press the Clear key

Personal information

FCC DRAFT

PRELIMINARY

to prevent that viewer from seeing your private presence messages.

•View details—Show the user ID information of the viewer.

•Refresh lists—Update the viewer lists. This option is only available when you

are not logged in to the presence service.

Update presence—Update your presence information to the presence service.

Settings—Manage the publishing of your presence.

BLOCKED PRESENCE

Select Menu > Presence > Blocked pres. to change your blocked presence

information. Blocked viewers will see a screen containing no personal details.

Select Options and one of the following:

Viewers—Open your blocked viewers list to see the names, phone numbers, or user

IDs of the viewers whom you have blocked from seeing your public or private

presence information. You can scroll to a viewer, press Options, and select from the

following options:

•Unblock—Remove the viewer from the blocked list. You can also unblock a

viewer by scrolling to the viewer and pressing the Clear key.

•Add to private list—Allow the viewer to also see your private presence.

•Add new—Add a new blocked viewer manually or from your contacts directory.

You can only select a contact who has a user ID in the contact card.

•Add to contacts—Add the viewer to your contacts directory.

•View details—Show the user ID information of the viewer.

•Refresh lists—Connect to the presence service to update the viewer lists. This

option is only available when you are not logged in to the presence service.

Update presence—Update your presence information to the presence service.

Settings—Manage the publishing of your presence.

Update your information

Select Menu > Presence > Options > Update presence.

This option is only available when you are logged in to the presence service and

have changed your information in the Private Presence or Public Presence view

and have not updated that presence information yet.

FCC DRAFT

PRELIMINARY

Presence settings

Select Options > Settings from the Presence main menu, and select from the

following:

Show presence to—Select from the following:

•Private & public—Both public and private presence is published.

•Private viewers—Only private viewers can see your presence information.

•Public viewers—Both public and private viewers see your public presence

information.

•No one—Your presence information is not published.

Sync. with Profiles—Defines whether your published presence information is

linked to your phone profile settings. When you choose an option other than Off,

be sure to define your profile presence information as well (see “Create and

customize profiles” on page 80). Select from the following:

•Off—Your presence information is not changed, even if you change your phone

profile setting.

•Presen. msg. only—Both Availability and Private message are changed when

you change your phone profile setting.

•Availability only—Private message is not changed when you change your

profile.

•Private msg. only—Availability is not changed when you change your profile

setting.

Server settings—Opens the Server settings menu in the IM feature. Select

Presence login type from this menu to designate when you want to log in to the

presence service. See “IM settings” on page 95 for further information on the login

types.

•POSITIONING (NETWORK SERVICE)

Select Menu > Positioning.

Positioning allows the network to detect the position of your phone. By enabling

or disabling Positioning, you choose when your position information is provided to

the network.

To enable positioning in your phone, select Settings > Positioning > On.

Personal information

FCC DRAFT

PRELIMINARY

When you receive a position request, a message is

displayed showing the service that is making the

request. Press Accept to allow your position

information to be sent, or press Reject to deny the

request.

Position request messages are logged in the Recv.

requests list. To view them, select Menu >

Positioning > Recv. requests. The icon beside each

request indicates whether the request is new,

rejected, or accepted. If you want to see details of a

request, scroll to the request and press the middle of

the scroll key. If you want to clear the Recv. requests

list, select Options > Clear list.

•CALENDAR

In Calendar, you can keep track of your appointments, meetings,

birthdays, anniversaries, and other events. You can also set a

calendar alarm to remind you of upcoming events.

Create entries

1Select Menu > Calendar.

2Select Options > New entry and select from the following options:

Meeting—Creates an appointment that has a specific date and time.

Memo—Creates a general entry for a day.

Anniversary—Creates a reminder for birthdays or special dates. Anniversary

entries are repeated every year.

3Fill in the fields. Use the scroll key to move between fields.

Subject or Occasion—Write a description of the event.

Location—Indicates the place of a meeting (optional).

Start time,End time,Start date, and End date.

Alarm—Select On to display the Alarm time and Alarm date fields.

Repeat—Press the middle of the scroll key to change the entry to be repeating.

Shown with in the day view.

Repeat until—Set an ending date for the repeated entry, for example, the

ending date of a weekly course you are taking. This option is shown only if you

have selected to repeat the event.

Synchronization:

FCC DRAFT

PRELIMINARY

•Private—After synchronization the calendar entry can be seen only by you

and it will not be shown to others, even if they have online access to view

the calendar.

•Public—The calendar entry is shown to others who have access to view

your calendar online.

•None—The calendar entry will not be copied when you synchronize your

calendar.

4To save the entry, press Done.

When editing or deleting a repeated entry, choose how you want the changes to

take effect: All occurrences—all repeated entries are changed, or This entry only—

only the current entry will be changed.

Calendar views

Press the #key in the month, week, or day views to automatically highlight today’s

date.

To key in a calendar entry, press any number key (1–0) in any calendar view. A

meeting entry is opened and the characters you keyed in are added to the Subject

field.

To go to a certain date, select Options > Go to date. Write the date, and press OK.

Icons in the day view are —Memo and —Anniversary.

Synchronization icons in the week and month views are red for private

synchronization, blue for public synchronization, pink for no synchronization, and

black for more than one synchronization entry in a day.

Calendar settings

Select Options > Settings and select one of the following options:

Calendar alarm tone—Select a personalized alarm tone, or no tone at all.

Default view—Select the view that is shown first when you open Calendar.

Week starts on—Change the starting day of the week. If you change the settings

so that the week starts on a day other than Sunday, the week numbers will not be

shown.

Week view title—Change the title of the week view to be the week number or the

week dates.

Clear calendar memory

To remove more than one event at a time, go to the month view, and select

Options > Delete entry and one of the following:

Personal information

FCC DRAFT

PRELIMINARY

Before date—Delete all calendar entries that take place before a certain date. Enter

the date before which all calendar entries will be deleted.

All entries—Delete all calendar entries.

•TO-DO

In the To-do list you can keep a list of tasks that you need to do. The

to-do list uses shared memory. See "Shared memory" on page 3.

1Select Menu > To-do.

2To start entering a to-do note, press any number key (1–0).

The editor opens and the cursor blinks after the letters you have entered in the

Subject field.

3Finish entering the task in the Subject field.

4Scroll to the Due date field, and key in a date.

5To set a priority for the task, scroll to the Priority field, and select High,

Normal, or Low.

6To save the to-do note, press Done.

If you remove all characters from the Subject field and press Done, the note

will be deleted, even if you are editing a previously saved note.

To open a to-do note, scroll to it and press the middle of the scroll key.

To delete a to-do note, scroll to it and select Options > Delete; or press the

Clear key, and select Yes to confirm.

To mark a to-do note as completed, scroll to it and select Options > Mark as done.

To restore a to-do note, select Options > Mark as not done.

•COPY CONTENT FROM COMPATIBLE NOKIA

PHONES

You can move calendar, contacts, and to-do data from compatible Nokia phones to

your Nokia 7610 phone using your PC and the PC Suite Nokia Content Copier

application. Instructions for using the application can be found in the help function

of PC Suite on the CD-ROM.

FCC DRAFT

PRELIMINARY

6 Multimedia

•CAMERA

You can use the camera to take pictures and record videos while on

the move. The images are automatically saved in Gallery, where you can rename

them and organize them in folders. You can also send images and video recordings

in a multimedia message, as an e-mail attachment, or by Bluetooth connection.

The camera produces JPEG images, and video clips are recorded in the 3GPP file

format with the .3gp file extension.

Take pictures

1Press Camera in the standby mode, or select Menu > Camera, and scroll left

to make sure you are on the Image tab.

The camera opens, and you can see the viewfinder and the cropping lines,

which show you the image area to be captured. You can also see the image

counter, which shows you how many images, depending on the selected

picture quality, fit in the memory of your phone or memory card, if you use

one.

Options before taking a picture are Capture,New,Activate night mode or

Deact. night mode,Self-timer,Go to Gallery,Settings,Help, and Exit.

2Scroll up to zoom in on your subject before taking the picture; scroll down to

zoom out again.

The zoom indicator to the right of the display shows the zoom level.

3To take a picture, press the middle of the scroll key.

Do not move the phone before the camera application starts to save the

image. The image is saved automatically in Gallery. See "Gallery" on page 42.

The resolution of a zoomed picture is lower than that of a non-zoomed picture, but

the image remains the same size. You may notice the difference in image quality if

viewed on a PC, for example. If camera images look smudgy, check that the camera

lens protection window is clean. See "Care and maintenance" on page 125.

The camera goes into battery saving mode if there have been no key presses within

a minute. To continue taking pictures, press the middle of the scroll key.

OPTIONS AFTER CAPTURING AN IMAGE

Options after a picture has been taken are New,Delete,Send,Set as wallpaper,

Rename image,Go to Gallery,Settings,Help, and Exit.

If you do not want to save the image, select Options > Delete.

Multimedia

FCC DRAFT

PRELIMINARY

To return to the viewfinder to take a new picture, press the middle of the scroll key.

You can insert an image into a contact card. See "Create and edit contact cards"

on page 25.

SELF-TIMER

To include yourself in the picture, use the self-timer to delay the taking of a picture.

1Select Options > Self-timer.

2Select the delay 10 seconds,20 seconds, or 30 seconds.

3Press Activate.

The camera takes the picture after the selected delay has elapsed.

IMAGES AND MEMORY CONSUMPTION

Your phone has approximately 8 MB of free memory for images, contact

information, calendar, messages, and so on. See "Shared memory" on page 3.

Images taken using the high-quality setting and those taken in night mode take up

the most memory.

By using a memory card with your phone you can increase the number of images

you can store. To see how much memory is available on your phone and memory

card, see “View memory consumption” on page 76.

The following table shows approximately how many images would fit in 1 MB of

memory, depending on image type and quality:

Record videos

1Press Camera in the standby mode, or select Menu > Camera, and scroll right

to move to the Video tab.

Options before recording a video are Record,New,Activate night mode or

Deact. night mode,Mute,Go to Gallery,Settings,Help, and Exit.

2Press the middle of the scroll key to start recording.

•To pause recording at any time, press Pause. Press Continue to resume

recording.

Image quality

Image type Basic Normal High

Standard 55 22 15

Night 502518

FCC DRAFT

PRELIMINARY

•Scroll up to zoom in on your subject before or during recording;

scroll down to zoom out again.

3Press Stop to stop recording.

The video clip is saved to either phone memory or the memory card, depending on

the Memory in use setting. See "Camera and video settings" on page 38.

To immediately play the video clip you just recorded, select Options > Play.

To play previously saved video clips, go to Gallery. See "Gallery" on page 42.

Options after you have recorded a video are New,Play,Delete,Send,Rename,Go

to Gallery,Settings,Help, and Exit.

Camera and video settings

Select Menu > Camera > Options > Settings to adjust the settings for still image

captures and video recording. Select the following options:

Image—Adjust the settings for still images:

•Image quality—High,Normal, and Basic. The better the image quality, the

more memory the image consumes. See "Images and memory consumption"

on page 37.

•Default image name—By default, Camera names images in the Image.jpg

format. Default image name allows you to set a name for the images stored.

•Memory in use—Select whether you want to save your images in phone

memory or on the memory card, if you use one.

Video—Adjust the settings for recording videos:

•Length—Available recording time is displayed above the top right corner of the

viewfinder. Select one of the following video length options:

•Maximum—Recorded video length is restricted by available memory.

Recordings can last up to 10 minutes, depending on available memory.

•Short—Restricts video length to optimize it for MMS sending.

•Video resolution—Select 128x96 or 176x144.

•Default video name—Define a default name. For example, if you set Holiday

as the default video clip name, the video recorder will name all video clips

Holiday(001),Holiday(002), and so on, until you change the setting again.

•Memory in use—Select whether you want to save your videos in phone

memory or on the memory card, if you use one.

Multimedia

FCC DRAFT

PRELIMINARY

•VIEW IMAGES

Pictures taken with the camera are stored as images in Gallery. See "Gallery" on

page 42.

Select Menu > Gallery > Images, and select an image. Press the middle of the

scroll key to start the image viewer and display the image.

In the images thumbnail view:

1Scroll right or left to move between the phone and memory card.

2To browse the list of images, scroll up and down.

3Press the middle of the scroll key to open an image. When the image is open,

you can see the name of the image.

When viewing an image, scroll right or left to go to the next or previous image in

the current folder.

Options when viewing an image are Send,Set as wallpaper,Rotate,Zoom in,Zoom

out,Full screen,Delete,Rename,View details,Add to ’Go to’,Help, and Exit.

You can view animated GIF files in the same way as other images.

Zoom on a saved image

1Select Options > Zoom in or Zoom out.

You can see the zooming ratio at the top of the display. See "Keyboard

shortcuts" on page 39.

2Press Back to return to the initial view.

The zooming ratio is not stored permanently.

If you zoom in on GIF animations while they are playing, the animation will freeze

until normal zoom is resumed, when play will continue.

FULL SCREEN

When you select Options > Full screen, the panes around the image are removed

so that you can see more of the image. Press the Right selection key to return to

the initial view.

MOVE THE FOCUS

When you are zooming an image, use the scroll key to move the focus to the left,

right, up, or down, so that you can take a closer look at one part of the image, for

example, its upper right corner.

Keyboard shortcuts

1key—Rotate image 90 degrees counterclockwise.

FCC DRAFT

PRELIMINARY

3key—Rotate image 90 degrees clockwise.

5 key—Zoom in.

0 key—Zoom out.

* key—Change between full screen and normal view.

Scroll key—Scroll up, down, left, right.

When you rotate an image, the rotation status is not stored permanently.

•REALPLAYER

Select Menu > RealPlayer.

With RealPlayer, you can play local media files stored in the phone memory or

memory card, or stream media files over the air from a streaming link. The

streaming link can be activated during a browsing session or stored in the phone

memory or memory card.

Media files are video, music, or audio clips. Files with the extensions .3gp, .amr,

.mp4, .rm, and .ram are supported by RealPlayer.

RealPlayer does not support all file formats or all the variations of a file format. For

example, RealPlayer will attempt to open all .mp4 files. However, some .mp4 files

may include content that is not compliant with 3GPP standards and, therefore, is

not supported by this phone. In this case, the operation might fail and result in

partial playback or in an error message.

Play media files

Options in RealPlayer when a clip is playing are Play,Pause,Continue,Stop,Mute,

Unmute,Clip details,Settings,Help, and Exit.

To play a media file, select Menu > RealPlayer >

Options > Open and one of the following:

Most recent clips—Play one of the last 6 files played

in RealPlayer.

Saved clip—Scroll to a file in phone memory or on

memory card, and press the middle of the scroll key

to play the file.

Mem. card sound clips—Create a track list from all

sound files on the memory card. When you create a

track list this way, the first song in the list

automatically begins playing.

Multimedia

FCC DRAFT

PRELIMINARY

STREAM CONTENT OVER THE AIR

•Select a streaming link saved in Gallery. Before your live content begins

streaming, your phone will connect to the site and load the file.

•Open the link to a file in the browser.

To stream live content, you must first configure your default access point. See

"Access points" on page 66. For the default access point, some service providers

will require you to use an access point defined in your phone. Other service

providers allow you to use a WAP access point. Contact your service provider for

more information.

In RealPlayer, you can only open an rtsp:// URL address. You cannot open an

http:// URL address. However, RealPlayer will recognize an http link to a .ram file

since a .ram file is a text file containing an rtsp link.

SHORTCUTS DURING PLAY

When a media file is playing, use the scroll key to seek (move quickly through the

media file), and to mute the sound, as follows:

Scroll up and hold to seek forward, or scroll down and hold to seek backward

through the media file.

Scroll left and hold until the indicator is displayed to mute the sound.

Scroll right and hold until you see the indicator to turn on the sound.

Change settings

Select Options > Settings > Video, Audio, or Connection.

Scroll right or left to move between the different setting tabs for Video,Audio,

and Connection, and select the settings you would like to modify.

•MOVIE DIRECTOR

Select Menu > Movie director.

Use Movie director to create edited video clips that may contain video, sound, and

text. Editing is carried out automatically according to the style that you select. The

style determines the transitions and visual effects that are used in the video clip.

Open Movie director and scroll right or left to move between the tab and the

tab.

In the tab, you can select the following options:

Quick muvee—Create video clips suitable to be sent by multimedia message. You

can select several video clips and the style you want to apply to them. The duration

of the Quick muvee video clip is typically less than 10 seconds.

FCC DRAFT

PRELIMINARY

Custom muvee—Select video clips and apply a style, music, and message; set the

duration; and preview the video clip before saving. When you scroll through the

list, the options become available:

•Select video—Select the source file or files you want to use. Select Mark/

Unmark,Play, or Capture.

•Select style—Select a style from the list. Styles determine the effects and

message caption. Each style is associated with default music and message

text.

•Select music—Select a music clip from the list.

•Select message—Add a caption to the beginning and end of the video clip. You

can enter a message or select one from the template. You can edit the default

message text.

•Create muvee—Set the duration for the video clip. Select Multimedia message

to create a video size suitable to be sent by MMS, Same as music to create a

video of the same duration as the selected music clip, or User defined to enter

the video duration manually.

After the video preview is prepared the Preview muvee view opens, where you can

Play,Recreate (to make a new variation of the video clip), and Save the new video

clip.

Style downloads—Download and install new styles.

Settings—Select the setting you want to change:

•Memory in use—Select Phone memory or Memory card.

•Resolution—Select High,Low or Automatic.

•Default muvee name—Enter a default name for your video clips.

The tab contains a list of video clips that you can Play,Send,Rename, and

Delete.

•GALLERY

Select Menu > Gallery.

Options in Gallery are Open (folder or item), Send,Delete,Create new,Move to

folder,Copy to folder,New folder,Mark/Unmark,Edit,Rename,Gallery downloads,

Image uploader,View details,Add to ’Go to’,Settings,Help, and Exit.

Use Gallery to store and organize your images, sound clips, video clips, and

streaming links.

Open Gallery to see a list of the folders in the phone memory. Scroll right to see

the folders on the memory card, if you use one.

Multimedia

FCC DRAFT

PRELIMINARY

Scroll to Images,Sound clips,Video clips, or another folder that you have created,

and press the middle of the scroll key to open it.

In the open folder you can see:

•An icon depicting the type of each file in the folder, or in the case of an image,

a small thumbnail picture giving a preview of the image

•The name of the file

•The date and time a file was saved, or the size of the file

•Subfolders, if present

You can browse, open, and create folders, and you can mark, copy, and move items

to folders. See "Common actions for all applications" on page 15.

Open files

Select any file and press the middle of the scroll key to open it. Each file will open

in its corresponding application as follows:

•Images files open in the image viewer. See "View images" on page 39.

•Sound clips open and play in the music player.

•Video clips and streaming links open and play in RealPlayer. See "RealPlayer"

on page 40.

•Subfolders open to display contents.

Default images folders

Select Gallery > Images. The Images folder is the default location where your

phone saves images taken with the camera. Within the Images folder, there are

additional default folders called Picture msgs.,Presence logos, and Wallapers.

PICTURE MESSAGES FOLDER

Select Gallery > Images > Picture msgs.

Use this folder to store pictures sent to you in picture messages. To save a picture

that you have received in a picture message, select Messaging > Inbox, open the

message, and select Options > Save picture.

Options in the picture messages folder are Open,Send,Delete,Mark/Unmark,

Rename,View details,Help, and Exit.

PRESENCE LOGOS FOLDER

Select Gallery > Images > Presence logos.

Use this folder to store logos for Presence. See "Presence (network service)" on

page 29.

FCC DRAFT

PRELIMINARY

WALLPAPERS FOLDER

Select Gallery > Images > Wallpapers.

Use this folder to store pictures that you want to use as background images.

Download files

To download files into Gallery using the browser, select Options > Gallery

downloads > Graphic downloads,Video downloads, or Tone downloads. The

browser opens and you can choose a bookmark for the site from which to

download. See "Bookmarks" on page 105.

To download files, you must configure your default access point. See "Access

points" on page 66.

Once items have been downloaded, the browser closes and the phone returns to

Gallery.

Upload images to an image server (network service)

You can send your pictures to an image server to allow others to share your pictures

online. Before you can upload images, you must set up the image server; you can

get the specific settings from your service provider:

1Select Settings > Image servers, and press the Left selection key.

2Fill in the details for each field. (See “Access points” on page 66.)

3Press the Right selection key.

To upload images:

1Select Options > Image uploader.

2To begin an upload, mark the images that you want to upload, and select

Upload.

3Enter a name for the folder on the image server in which the images will be

stored, and press the Left selection key.

Track lists for audio files

You can create a track list to play audio files on your phone. Select Menu >

Gallery > Create new > Track list, and follow the screen prompts to select sound

clips for the track list. To add multiple tracks at one time, press the Edit key and

the scroll key simultaneously to place a checkmark beside each track you want to

add, and select Options > Select marked items.

To play a track list, select Menu > Gallery and locate the track list in phone

memory or on the memory card. Scroll to the track list and press the middle of the

scroll key to begin playing it.

Multimedia

FCC DRAFT

PRELIMINARY

To modify a track list, locate the track list in Gallery, and select Options > Edit

track list > Options > Add sound clip.

To delete clips, open the track list, scroll to a clip, and select Options > Delete.

Options in the track list are Pause,Edit track list,Clip details,Settings,Help, and

Exit.

FCC DRAFT

PRELIMINARY

7 Messaging

Note: This function can only be used if it is supported by

your network operator or service provider. Only devices that offer

compatible picture message, multimedia message, or e-mail features can

receive and display these messages. Devices that do not have multimedia

features may receive details of a link to a web page.

Select Menu > Messaging.

In Messaging you can create, send, receive, view, edit, and organize:

•Text messages

•Multimedia messages (MMS)

•E-mail messages

Options in the Messaging main view are Create message,Connect (shown if you

have defined settings for the mailbox) or Disconnect (shown if there is an active

connection to the mailbox), SIM messages,Cell broadcast,Service command,

Settings,Help, and Exit.

When you open Messaging, you can see the New message selection and a list of

default folders:

Inbox—Contains received messages except e-mail and cell broadcast

messages. E-mail messages are stored in Mailbox. You can read cell

broadcast messages by selecting Options > Cell broadcast.

My folders—For organizing your messages into folders.

Mailbox—When you open this folder, you can either connect to your

remote mailbox to retrieve your new e-mail messages, or you can view

your previously retrieved e-mail messages without logging in to the

e-mail server. After you have defined settings for a new mailbox, the

name given to that mailbox will replace Mailbox in the main view. See

"E-mail" on page 60.

Drafts—Stores drafts of messages that have not been sent.

Sent—Stores the last 15 messages that have been sent. To change the

number of messages to be saved, see “Other settings” on page 62.

Messages or data that have been sent by a Bluetooth connection are

not saved in the Draft or Sent folders.

Outbox—Temporary storage place for messages waiting to be sent.

Messaging

FCC DRAFT

PRELIMINARY

•WRITE TEXT

You can key in text in two different ways, using the method traditionally used in

mobile phones or another method called predictive text input.

Traditional text input

The indicator is shown on the top right of the display when you are writing

text using traditional text input.

Press a number key (1–9), repeatedly until the desired character appears. Note that

there are more characters available for a number key than are printed on the key.

Icons: and indicate the selected case. means that the first

letter of the next word is written in upper case, and all other letters will

automatically be written in lower case. indicates number mode.

To insert a number, press and hold the corresponding number key.

To switch between letter and number mode, press and hold the #key.

If the next letter is located on the same key as the present one, wait until the cursor

appears (or scroll right to end the time-out period), and then key in the letter.

If you make a mistake, press the Clear key to remove a character. Press and hold

the Clear key to clear more than one character.

Reports (network service)—You can request that the network send you

a delivery report of the text messages, smart messages, and multimedia

messages you have sent. To turn on delivery report reception, go to the

Messaging main menu, select Options > Settings > Text messageor

Multimedia message, and select Receive report > Yes.

It might not be possible to receive a delivery report of a multimedia

message that has been sent to an e-mail address.

Note:When sending messages, your device may display the

words Message Sent. This is an indication that the message

has been sent by your device to the message center number

programmed into your device. This is not an indication that the

message has been received at the intended destination. For

more details about messaging services, check with your service

provider.

Before you create a multimedia message, write an e-mail, or connect to

your remote mailbox, you must have the correct connection settings in

place. See "Write and send messages" on page 50. See "Settings needed

for multimedia messaging" on page 51.

FCC DRAFT

PRELIMINARY

The most common punctuation marks are available under the 1key. Press the 1key

repeatedly to reach the desired punctuation mark. You can also press the *key to

open a list of special characters. Use the scroll key to move through the list and

press Select to select a character.

To insert a space, press the 0key. To move the cursor to the next line, press the

0key three times.

To switch between upper and lower case, press the #key.

Predictive text input

To activate predictive text input, press the Edit key and select Predictive text on,

or press the #key twice quickly when writing text. This will activate predictive text

input for all editors in the phone. The indicator is shown at the top of the

display.

1Write the desired word by pressing the keys 2–9. Press each key only once for

one letter. The word changes after every key press.

For example, to write Nokia when the English

dictionary is selected, press the following keys:

6 key for N

6 key for o

5 key for k

4 key for i

2 key for a

The word suggestion changes after each key

press.

2When you have finished the word, check that it is correct.

If the word is correct, you can confirm it by scrolling right or by pressing the

0key to insert a space. The underlining disappears and you can begin to write

a new word.

If the word is not correct, you have the following options:

•Press the *key repeatedly to view the matching words the dictionary has

found one by one.

•Press the Edit key, and select Predictive text > Matches to view a list of

matching words. Scroll to the word you want to use and press the middle

of the scroll key to select it.

If the ? character is shown after the word, the word you intended to write is

not in the dictionary. To add a word to the dictionary, press Spell, key in the

word (up to 32 letters) using traditional text input, and press OK. The word is

added to the dictionary. When the dictionary becomes full, a new word

Messaging

FCC DRAFT

PRELIMINARY

replaces the oldest added word.

To remove the ? and clear characters one by one from the word, press the

Clear key.

TIPS ON PREDICTIVE TEXT INPUT

Erase a character—Press the Clear key. Press and hold the Clear key to clear more

than one character.

Change between the different character cases—Press the #key to change

between the character cases Abc (), abc (), and ABC (). Note

that if you press the #key twice quickly the predictive text input is turned off.

Insert a number in letter mode—Press and hold the desired number key, or press

the Edit key and select number mode, key in the numbers you want, and press OK.

Insert symbols and punctuation marks:

•The most common symbols and punctuation marks are available under the

1key. Press the 1key repeatedly to find the desired entry.

•Press and hold the *key to open a list of special characters. Use the scroll key

to scroll through the list, and press Select to select a character; or press the

Edit key, and select Insert symbol.

The predictive text input will try to guess which commonly used punctuation mark

(.,?!‘) is needed. The order and availability of the punctuation marks depend on the

language of the dictionary.

Choose from multiple entries—Press the *key repeatedly to view the matching

words the dictionary has found one by one.

Choose predictive text options—When a word has been entered with predictive

text on, you can press the Edit key, select Predictive text, and select one of the

following:

•Matches—View a list of words that correspond to your key presses. Scroll to

the desired word and press the middle of the scroll key.

•Insert word—Add a word (up to 32 letters) to the dictionary by using

traditional text input. When the dictionary becomes full, a new word replaces

the oldest added word.

•Edit word—Open a view where you can edit the word. This option is available

only if the word is active (underlined).

•Off—Turn off predictive text input for all editors in the phone.

WRITE COMPOUND WORDS

Write the first half of a compound word and confirm it by scrolling right. Write the

last part of the compound word and complete the compound word by pressing the

0key to add a space.

FCC DRAFT

PRELIMINARY

Copy and paste text

If you want to copy text to the clipboard, the following is the easiest method:

1To select letters and words, press and hold the Edit key.

At the same time, scroll right or left. As the selection moves, text is

highlighted.

To select lines of text, press and hold the Edit key. At the same time

scroll down or up.

2To end the selection, release the scroll key while holding the Edit key.

3To copy the text to the clipboard, while still holding the Edit key, press Copy,

or release the Edit key, and press it once to open a list of editing commands,

for example, Copy or Cut.

If you want to remove the selected text from the document, press the

Clear key.

4To paste the text into a document, press and hold the Edit key, and press Paste;

or press the Edit key once, and select Paste.

•WRITE AND SEND MESSAGES

Before you can create a multimedia message, write an e-mail message, or connect

to your remote mailbox, you must have the correct connection settings in place.

See “Write and send messages” on page 50 and “Settings needed for multimedia

messaging” on page 51.

Options in the text message editor are Send,Add recipient,Insert,Delete,Check

names,Message details,Sending options,Help, and Exit.

1Select New message, and select one of the following options:

Text message—Create and send a text message.

To send a picture message, select Options > Insert > Picture. Each picture

message is made up of several text messages. Therefore, sending one picture

message may cost more than sending one text message.

Multimedia message—Create and send a multimedia message (MMS).

Each picture message is made up o fseveral text messages. Therefore, sending

one picture message may cost more than sending one text message.

from being copied, modified, transferred, or forwarded.

E-mail—Create and send an e-mail. If you have not set up your e-mail

account, you will be prompted to do so.

Messaging

FCC DRAFT

PRELIMINARY

2Press the middle of the scroll key to select recipients from the contacts

directory, or write the phone number or e-mail address of the recipient in the

To field if you are sending an MMS or e-mail to the recipient. Press the #key

to add a semicolon (;) to separate each recipient.

3Scroll down to move to the message field.

4Write the message.

To add an existing media object to a multimedia message, select Options >

Insert object > Image,Sound clip, or Video clip; then select an item.

To insert a new media object into a multimedia message, select Options >

Insert new > Image,Sound clip,Video clip, or Slide; then create the new

item.

When sound has been added, the icon is shown in the navigation bar. If

you select Insert new > Sound clip, the voice recorder opens and you can

record a new sound. The sound is automatically saved and a copy is inserted

in the message.

5To send the message, select Options > Send, or press the Send key.

SETTINGS NEEDED FOR MULTIMEDIA MESSAGING

You may receive the settings as a smart message from your network operator or

service provider. See "Smart messages" on page 54.

For availability of and subscription to data services, contact your network operator

or service provider.

SelectMessaging > Options > Settings > Multimedia message > Access point in

use and select the access point you created. See "Multimedia messages" on

page 59.

SETTINGS NEEDED FOR E-MAIL

Before you can send, receive, retrieve, reply to, and forward e-mail to a separate

e-mail account, you must:

•Configure an Internet access point (IAP). See "Connection" on page 65.

•Define your e-mail settings. See "E-mail" on page 60.

Follow the instructions given by your remote mailbox and Internet service provider.

FCC DRAFT

PRELIMINARY

•CREATE A MULTIMEDIA PRESENTATION

When you create a multimedia message, you can

insert a presentation on one or more slides. The

presentation displays the items in the multimedia

message with transitions (wipes) between each

slide.

1Select Menu > Messaging > New message >

Multimedia message > Options > Create

presentation.

Options in a presentation are Send,Full screen,

Insert,Edit text,Preview message,Remove,

Backgrnd. settings,Effect settings,Help, and

Exit.

2Scroll to the template on which you want to base your presentation, and press

Select.

You are not restricted to the number of slides/format in the template, it is just

a framework to get started.

3Insert text, video clips, images, and sound clips onto the slides as with a

multimedia message.

4Use the scroll key to navigate around the elements of a slide and to move from

one slide to another.

5When you finish creating the presentation and composing the multimedia

message, select Options > Send to send the message.

Background settings

Each of the following settings, when applied, affect the whole presentation:

Set colour—Choose a color for the background.

Add image—Select an image from the Gallery. See "Gallery" on page 42.

Remove image—Removes a previously added image, and returns to the template

default.

Remove sound clip—Removes a previously added sound clip.

Effects settings

The effects settings allow a transition to be applied to an image or to a slide. For

example, a slide wipe will give the appearance of the image, or slide, moving into

the display. The effects settings, when applied, affect the whole presentation.

Messaging

FCC DRAFT

PRELIMINARY

View a presentation

When you receive a multimedia message that includes a presentation, select Play

presentation. The presentation will open and start.

A multimedia message containing presentation content can still be viewed as a

standard multimedia message.

Objects within the presentation may not start automatically. If, for example, a

video does not play when the presentation starts, move to the video clip object and

press the middle of the scroll key. All objects can be selected individually and

opened.

•INBOX—RECEIVE MESSAGES

Options in Inbox are Open,Create message,Reply,Delete,Message

details,Move to folder,Mark/Unmark,Help, and Exit.

When there are unread messages in Inbox, the icon changes to .

In Inbox, the message icons tell you what kind of a message it is. Here are some of

the icons that may appear:

View multimedia objects

Options in Objects are Open,Save,Send,Call, and Exit.

To see the available media objects in the multimedia message, open the message

and select Options > Objects. In Objects you can view files that have been

included in the multimedia message. You can choose to save the file in your phone

or to send it, for example, by Bluetooth connection to another compatible device.

Important: Multimedia message objects may contain viruses or be

harmful to your device or PC. Do not open any attachment if you are not

sure of the trustworthiness of the sender.

An unread text message

An unread smart message

An unread multimedia message

An unread service message

Data received by Bluetooth connection

An unknown message type

FCC DRAFT

PRELIMINARY

See "Certif. management" on page 71.

Smart messages

Your phone can receive many kinds of smart messages, text messages that contain

data (also called over-the-air (OTA) messages). To open a received smart message,

open Inbox, scroll to the smart message ( ), and press the middle of the scroll

key.

Picture message—Saves the picture in the Picture messages folder in Gallery for

later use, select Options > Save picture. If you receive a business card file that has

a picture attached, the picture will be saved to Contacts as well.

Business card—Saves the contact information, select Options > Save business

card. If certificates or sound files are attached to business cards, they will not be

saved.

Ringing tone—Saves the ringing tone to Gallery, select Options > Save.

Operator logo—Saves the logo, select Options > Save. The operator logo can now

be seen in the standby mode instead of the network operator’s own identification.

Calendar entry—Saves the entry to Calendar, select Options > Save to Calendar.

Web message—Saves the bookmark, select Options > Save to bookmarks. The

bookmark is added to the Bookmarks list in browser services.

If a message contains both browser access point settings and bookmarks, to save

the data select Options > Save all, or select Options > View details to view the

bookmark and access point information separately. If you do not want to save all

data, select a setting or bookmark, open the details, and select Options > Save to

Settings or Save to bookmarks, depending on what you are viewing.

E-mail notification—Tells you how many new e-mails you have in your remote

mailbox. An extended notification may list more detailed information such as

subject, sender, attachments, and so on.

Wallet—You can receive payment cards, loyalty cards, access cards, address cards,

RFIDs, and tickets.

In addition, you can receive a text message service number; voice mail number;

profile settings for remote synchronization; access point settings for the browser,

multimedia messaging, or e-mail; presence and IM settings; access point login

script settings; or e-mail settings. To save the settings, select Options > Save to

SMS sett.,Save to Voice mail,Save to Settings, or Save to e-mail sett.

Service messages (network service)

Service messages can be, for example, notifications of news headlines, and they

may contain a text message or address of a browser service. For availability and

subscription, contact your service provider.

Messaging

FCC DRAFT

PRELIMINARY

•MY FOLDERS

In My folders you can organize your messages into folders, create new

folders, and rename and delete folders.

You can use Templates to create text templates for messages that you send often.

To create a new template, select Options > New template.

•REMOTE MAILBOX (NETWORK

SERVICE)

When you open this folder, you can connect to your remote mailbox to do the

following:

•Retrieve new e-mail headings or messages.

•View your previously retrieved e-mail headings or messages without logging

in to the e-mail server.

If you select New message > E-mail in Messaging, and you have not set up your

e-mail account, you will be prompted to do so. See "Write and send messages" on

page 50.

When you create a new mailbox, the name you give to the mailbox automatically

replaces Mailbox in Messaging. You can have up to six mailboxes.

Open the mailbox

When you open the mailbox, you can choose whether you want to view the

previously retrieved e-mail messages and e-mail headings with or without

connecting to the e-mail server.

When you scroll to your mailbox and press the middle of the scroll key, Connect to

mailbox? appears. Select Yes to connect to your mailbox or No to view previously

retrieved e-mail messages while not logged in to the e-mail server.

Another way to start a connection is to select Options > Connect.

Retrieve e-mail messages

If you are not logged in to the e-mail server, select Options > Connect to start a

connection to a remote mailbox.

1When you have an open connection to a remote mailbox, select Options >

Retrieve e-mail and one of the following:

•New—Retrieve all new e-mail messages to your phone.

•Selected—Retrieve only the e-mail messages that have been marked. Use

the Mark/Unmark > Mark or Unmark commands to select messages one

FCC DRAFT

PRELIMINARY

by one. See "Common actions for all applications" on page 15.

•All—Retrieve all messages from the mailbox.

To cancel retrieving, press Cancel. After you have retrieved the e-mail

messages, you can continue viewing them online.

2Select Options > Disconnect to close the connection and view the messages

offline from the e-mail server.

3To open an e-mail message, scroll to the e-mail you want to view and press

the middle of the scroll key.

If the e-mail message has not been retrieved (arrow in the icon is pointing

outwards) and you are offline from the e-mail server and select Open, you will

be asked if you want to retrieve this message from the mailbox.

To view e-mail attachments, open a message that has the attachment

indicator and select Options > Attachments. In Attachments, you can

retrieve, open, or save attachments, in supported formats. You can also send

attachments by Bluetooth connection.

Important: E-mail attachments may contain viruses or otherwise be

harmful to your device or PC. Do not open any attachment if you are not

sure of the trustworthiness of the sender.

If your mailbox uses the IMAP4 protocol, you can decide whether to retrieve e-mail

headings only, messages only, or messages and attachments. With the POP3

protocol, the options are e-mail headings only or messages and attachments. See

"E-mail" on page 60.

Delete e-mail messages

To delete an e-mail from the phone while still retaining it in the remote mailbox,

select Options > Delete > Phone only.

The phone mirrors the e-mail headings in the remote mailbox. If you delete the

message content, the e-mail heading stays in your phone. If you want to remove

the heading, delete the e-mail message from your remote mailbox first; then make

a connection from your phone to the remote mailbox again to update the status.

To delete an e-mail from both the phone and the remote mailbox, select Options >

Delete > Phone and server.

If you are not logged in to the e-mail server, the e-mail will be deleted from your

phone. During the next connection to the remote mailbox, it will be automatically

deleted from the remote mailbox. If you are using the POP3 protocol, messages

marked to be deleted are removed only after you have closed the connection to the

remote mailbox.

Messaging

FCC DRAFT

PRELIMINARY

UNDELETE MESSAGES WHEN OFFLINE FROM THE E-MAIL SERVER

To undelete an e-mail from both the phone and server, scroll to an e-mail that has

been marked to be deleted during the next connection ( ), and select Options >

Undelete.

Disconnect

When you are online, select Options > Disconnect to end the data call or GPRS

connection to the remote mailbox.

•OUTBOX

Outbox is a temporary storage place for messages that are waiting to

be sent. Status of the messages in Outbox are as follows:

Sending—A connection is being made and the message is being sent.

Waiting or Queued—When there are two similar types of messages in Outbox, one

of them is waiting until the first one is sent.

Resend at (time)—Sending has failed. The phone will try to send the message again

after a time-out period. Press Send if you want to restart the sending immediately.

Deferred—You can set documents to be on hold while they are in Outbox. Scroll to

a message that is being sent, and select Options > Defer sending.

Failed—The maximum number of sending attempts has been reached. If you were

trying to send a text message, open the message and check that the sending

settings are correct.

•VIEW MESSAGES ON A SIM CARD

Select Messaging > Options > SIM messages.

•CELL BROADCAST (NETWORK

SERVICE)

Select Messaging > Options > Cell broadcast.

You may be able to receive messages on various topics, such as weather or traffic

conditions, from your service provider. For available topics and relevant topic

numbers, contact your service provider. In the main view you can see:

•The status of the topic: for new, subscribed messages and for new,

unsubscribed messages.

FCC DRAFT

PRELIMINARY

•The topic number, topic name, and whether it has been flagged ( ) for

follow-up. You will be notified when messages belonging to a flagged topic

have arrived.

Options in Cell broadcast are Open,Subscribe or Unsubscribe,Hotmark or Remove

hotmark,Topic,Settings,Help, and Exit.

Note: A packet data (GPRS) connection may prevent cell broadcast

reception. Contact your network operator for the correct GPRS settings.

See "GPRS" on page 68.

•SERVICE COMMAND EDITOR

Select Messaging > Options > Service command. Key in and send

service requests (also known as USSD commands) for network services

to your service provider (for example, a request for activation commands).

•MESSAGING SETTINGS

Messaging settings have been divided into groups according to the different

message types. Scroll to the settings you want to edit and press the middle of the

scroll key.

Text messages

Select Messaging > Options > Settings > Text message to open the following list

of settings:

Message centers—Lists all the message centers that have been defined.

Msg. center in use (message center in use)—Defines which message center is used

for delivering text messages and smart messages such as picture messages.

Options when editing message center settings are Edit,New msg. center,Delete,

Help, and Exit.

Receive report (delivery report)—When this network service is set to Yes, the status

of the sent message (Pending,Failed, or Delivered) is shown in the reports

(network service).

Message validity—If the recipient of a message cannot be reached within the

validity period, the message is removed from the message service center. Note that

the network must support this feature. Maximum time is the maximum amount of

time allowed by the network.

Message sent as—The options are Text,Fax,Paging, and E-mail. For further

information, contact your network operator. Change this option only if you are sure

that your message center is able to convert text messages into these other formats.

Messaging

FCC DRAFT

PRELIMINARY

Preferred connection—You can send text messages over the normal GSM network

or by GPRS, if supported by the network.

Reply via same ctr. (network service)—By setting this option to Yes, if the recipient

replies to your message, the return message is sent using the same message service

center number. Note that this may not work between all operators.

Multimedia messages

Select Messaging > Options > Settings > Multimedia message to open the

following list of settings:

Access point in use—Select which access point is used as the preferred connection

for the multimedia message center. See "Settings needed for multimedia

messaging" on page 51.

If you receive multimedia message settings in a smart message and save them, the

received settings are automatically used for the access point. See "Smart

messages" on page 54.

Multimedia reception—Select from the following:

•Only in home net.—Receive multimedia messages only when you are in your

home network. When you are outside your home network, multimedia

message reception is turned off.

•Always on—Allow your phone to receive multimedia messages.

•Off—Do not receive multimedia messages or advertisements at all.

If Only in home net. or Always on is selected, your phone can make an active data

call or GPRS connection without your knowledge.

On receiving msg.—Select from the following:

•Retr. immediately—The phone will try to retrieve multimedia messages

instantly. If there are messages with Deferred status, they will be retrieved as

well.

•Defer retrieval—The multimedia messaging center will save the message to be

retrieved later. When you want to retrieve the message, set On receiving msg.

to Retr. immediately.

•Reject message—Reject multimedia messages. The multimedia message

center will delete the messages.

Allow anon. messages—Select No, if you want to reject messages coming from an

anonymous sender.

Receive ads—Define whether you want to allow reception of multimedia message

advertisements or not.

FCC DRAFT

PRELIMINARY

Receive report—Set to Yes if you want the status of the sent message (Pending,

Failed, or Delivered) to be shown in the reports. Receiving a delivery report of a

multimedia message that has been sent to an e-mail address might not be possible.

Deny report sending—Choose Yes if you do not want your phone to send delivery

reports of received multimedia messages.

Message validity (network service)—If the recipient of a message cannot be

reached within the validity period, the message is removed from the multimedia

message center. Maximum time is the maximum amount of time allowed by the

network.

Image size—Define the size of the image in a multimedia message. The options are

Small (up to 160x120 pixels) and Large (up to 640x480 pixels).

E-mail

SelectMessaging > Options > Settings > E-mail. Select Mailbox in use to choose

which mailbox you want to use.

Select Mailboxes to open a list of mailboxes that have been defined.

Options when editing Mailbox settings are Editing options,New mailbox,Delete,

Help, and Exit.

If no mailboxes have been defined, you will be prompted to do so. The following list

of settings is shown (this information is available from your e-mail service

provider):

Mailbox name—Write a descriptive name for the mailbox.

Access point in use (must be defined)—The Internet Access Point (IAP) used for the

mailbox. Choose an IAP from the list. See "Connection" on page 65.

My e-mail address (must be defined)—Write the e-mail address given to you by

your service provider. The address must contain the @ character. Replies to your

messages are sent to this address.

Outgoing mail server (must be defined)—Write the IP address or host name of the

computer that sends your e-mail.

Send message (network service)—Define how e-mail is sent from your phone:

•Immediately—A connection to the mailbox is started immediately after you

have selected Send.

•During next conn.—E-mail is sent when you connect to your remote mailbox

the next time.

Send copy to self—Select Yes to save a copy of the e-mail to your remote mailbox

and to the address defined in My e-mail address.

Messaging

FCC DRAFT

PRELIMINARY

Include signature—Select Yes if you want to attach a signature to your e-mail

messages and to start to write or edit your signature text.

User name—Write your user name, given to you by your service provider.

Password—Write your password. If you leave this field blank, you will be prompted

for the password when you try to connect to your remote mailbox.

Incoming mail server (must be defined)—Write the IP address or host name of the

computer that receives your e-mail.

Mailbox type—Defines the e-mail protocol your remote mailbox service provider

recommends. The options are POP3 and IMAP4. This setting can be selected only

once and cannot be changed if you have saved or exited from the mailbox settings.

Security—Used with the POP3, IMAP4, and SMTP protocols to secure the

connection to the remote mailbox.

APOP secure login—Used with the POP3 protocol to encrypt the sending of

passwords to the remote e-mail server. This option is only shown if POP3 is selected

for Mailbox type.

Retrieve attachment—Retrieve e-mail with or without attachments. This option is

only shown if the Mailbox type is set to IMAP4.

Retrieve headers—Limit the number of e-mail headers you want to retrieve to your

phone. The options are All and User defined. Used with the IMAP4 protocol only.

Service messages

When you select Messaging > Options > Settings > Service message, the

following list of settings opens:

Service messages—Choose whether or not you want to allow reception of service

messages.

Download messages—Choose if you want to receive service messages only from

authorized sources.

Cell broadcast (network service)

Check with your service provider about whether Cell broadcast is available and

what the available topics and related topic numbers are. Select Messaging >

Options > Settings > Cell broadcast to change the settings:

Reception—On or Off.

Language—All allows you to receive cell broadcast messages in every possible

language. Selected allows you to choose in which languages you wish to receive

cell broadcast messages. If the language you prefer is not in the list, select Other.

FCC DRAFT

PRELIMINARY

Topic detection—If you receive a message that does not belong to any of the

existing topics, select On to save the topic number automatically. The topic number

is saved to the topic list and shown without a name. Select Off if you do not want

to save new topic numbers automatically.

Other settings

Select Messaging > Options > Settings > Other to open the following list of

settings:

Save sent messages—Choose if you want to save a copy of every text message,

multimedia message, or e-mail that you have sent to the Sent folder.

No. of saved msgs.—Define how many sent messages will be saved to the Sent

folder at a time. The default limit is 20 messages. When the limit is reached, the

oldest message is deleted.

Memory in use—Define the memory store. Choices are phone memory or memory

card, if one is used.

Settings

FCC DRAFT

PRELIMINARY

8 Settings

Select Menu > Settings.

1Scroll to a setting group and press the middle of

the scroll key to open it.

2Scroll to a setting you want to change and press

the middle of the scroll key to do the following:

•Switch between options if there are only

two (On/Off).

•Open a list of options or an editor.

•Open a slider view (scroll right or left to

increase or decrease the value,

respectively).

You may be able to receive some settings from your

service provider in a smart message, or some

settings may already be preprogramed into the phone. See "Smart messages" on

page 54.

•PHONE

Select Menu > Settings > Phone > General,Standby mode, or Display.

General

Phone language—You can change the language for the display texts in your phone.

This change may also affect the format used for date and time and the separators

used, for example, in calculations. If you select Automatic, the phone selects the

language according to the information on your SIM card. After you have changed

the display text language, you must restart the phone.

Note: Changing the settings for Phone language or Writing language

affects every application in your phone and the change remains effective

until you change these settings again.

Writing language—You can change the writing language of your phone. Changing

the language affects the following features:

•The characters available when you press any key (1–9)

•The predictive text dictionary used

•The special characters that are available when you press the *and 1keys

FCC DRAFT

PRELIMINARY

Predictive text—Set predictive text input On or Off for all editors in the phone.

Select a language for entering predictive text from the list available. You can also

change this setting when you are in an editor. Press the Edit key, and select

Predictive text > On or Off.

Welcome note or logo— The welcome note or logo is displayed briefly each time

you switch on the phone. Select Default if you want to use the default image or

animation. Select Text to write a welcome note (up to 50 letters). Select Image to

choose a photo or picture from Gallery.

Orig. phone settings—You can reset some of the settings to their original values.

To do this, you need the lock code. See "Security" on page 69. After resetting the

settings, the phone may take a longer time to power on. All documents and files

that you have created are left as they are.

Standby mode

Left selection key and Right selection key—You can change the shortcuts that

appear over the Left selection key and Right selection key in the standby mode. In

addition to the applications, you can have the shortcut point to a function, for

example, New message.

You can only have shortcuts to pre-installed applications and functions.

Display

Brightness—Adjust the slide bar between Dark and Bright.

Screen saver timeout—The screen saver is activated when the screen saver

time-out period is over. When the screen saver is active, the display is cleared and

you can see the screen saver bar.

To deactivate the screen saver press any key.

•CALL

Select Menu > Settings > Call > Send my caller ID,Call waiting,

Automatic redial,Summary after call,1-touch dialing,Anykey answer, or Line

in use.

Send my caller ID (network service)

This service allows you to set your phone number to be displayed (Yes) or hidden

(No) from the person to whom you are calling. This option may also be set by your

network operator or service provider when you make a subscription.

Settings

FCC DRAFT

PRELIMINARY

Call waiting (network service)

The network will notify you of a new incoming call while you have a call in

progress. Select Activate to request the network to activate call waiting, Cancel to

request the network to deactivate call waiting, or Check status to check if the

function is active or not.

Automatic redial

When this setting is activated, your phone will make a maximum of ten attempts

to connect the call after an unsuccessful call attempt. Press the End key to stop

automatic redialing.

Summary after call

Activate this setting if you want the phone to briefly display the approximate

duration of the last call.

1-touch dialing

Select On, and the numbers assigned to the 1-touch dialing keys (2–9) can be

dialed by pressing and holding the key. See "Assign 1-touch dialing keys" on

page 27.

Anykey answer

Select On, and you can answer an incoming call by briefly pressing any key, except

the Right selection key, the Power key, and the End key.

Line in use (network service)

This setting is shown only if the SIM card supports two subscriber numbers, that is,

two phone lines. Select which phone line (Line 1 or Line 2) you want to use for

making calls and sending short messages. Calls on both lines can be answered

regardless of the selected line.

You will not be able to make calls if you select Line 2 and have not subscribed to

this network service.

To prevent line selection, select Line change > Disable if supported by your SIM

card. To change this setting, you need the PIN2 code.

•CONNECTION

Select Menu > Settings > Connection > Access points,GPRS,

Data call, or Configurations.

FCC DRAFT

PRELIMINARY

Access points

An access point is the point where your phone connects to the mobile Internet by

way of a data call or packet data connection. An access point can be provided, for

example, by a commercial Internet service provider (ISP), service provider, or

network operator.

Many service providers will require you to use an Internet access point (IAP) for

your default access point. Other service providers allow you to use a browser access

point. Contact your service provider for more information.

To define access point settings, select Menu > Settings > Connection > Access

points. If you have not yet used your phone to make a WAP connection, you may

need to contact your service provider for assistance with the first-time connection,

or visit www.nokia.com/phonesettings.

Start to fill in the following settings from the top because depending on what data

connection you select in the Data bearer option only certain setting fields are

available:

Connection name—Give a descriptive name for the connection.

Data bearer—The options are GPRS and Data call. Depending on which data

connection you select, only certain setting fields are available. Fill in all fields

marked with Must be defined, or with an asterisk. Other fields can be left empty,

unless you have been instructed otherwise by your service provider.

To be able to use a data connection, the network operator or service provider must

support this feature, and if necessary, activate it for your SIM card.

Access point name (for packet data only)—The access point name is needed to

establish a connection to the GPRS network. You obtain the access point name

from your network operator or service provider.

Dial-up number (for Data call only)—The modem telephone number of the access

point.

User name—Write a user name if required by the service provider. The user name

may be needed to make a data connection and is usually provided by the service

provider. The user name is often case-sensitive.

Prompt password—If you must key in a new password every time you log on to a

server or if you do not want to save your password to the phone, choose Yes.

Password—A password may be needed to make a data connection and is usually

provided by the service provider. The password is often case-sensitive. When you

are writing the password, the characters you enter are shown briefly and then

changed to asterisks (*). The easiest way to enter numbers is to press and hold the

digit you want to enter and then continue entering letters.

Authentication—Normal or Secure.

Settings

FCC DRAFT

PRELIMINARY

Homepage—Depending on what you are setting up, write either:

•The service address.

•The address of the multimedia messaging center.

Data call type (for data call only)—Analog,ISDN v.110, or ISDN v.120 defines

whether the phone uses an analog or digital connection. This setting depends on

both your GSM network operator and Internet service provider (ISP) because some

GSM networks do not support certain types of ISDN connections. For details,

contact your ISP. If ISDN connections are available, they establish connections

more quickly than analog methods.

Maximum data speed (for data call only)—The options are Automatic,9600, or

14400, depending on what you have chosen in Data call type. This option allows

you to limit the maximum connection speed when GSM data is used. Higher data

rates may cost more, depending on the service provider.

The speeds above represent the maximum speed at which your connection will

operate. During the connection, the operating speed may be less, depending on

network conditions.

ADVANCED ACCESS POINT SETTINGS

If you need to enter advanced settings, contact your Internet service provider. To

access advanced access point settings, select Menu > Settings > Connection >

Access points, select the access point you want to modify, and select Options >

Advanced settings. You can then define the following settings:

Phone IP address—The IP address of your phone

Primary name server—The IP address of the primary DNS server

Second. name server—The IP address of the secondary DNS server

Proxy serv. address—The IP address of the proxy server

Proxy port number—The port number of the proxy server

The following advanced settings options are shown if you have selected Data call

as the Data bearer type in the general access point settings:

Use callback—This option allows a server to call you back once you have made the

initial call. Contact your service provider to subscribe to this service.

The phone expects the callback call to use the same data call settings that were

used in the callback-requesting call. The network must support that type of call in

both directions, to and from the phone.

Callback type—The options are Use server no. or Use other no. Ask your service

provider for the correct setting to use; it will depend on the service provider’s

configuration.

FCC DRAFT

PRELIMINARY

Callback number—Key in the phone data phone number that the dial back server

uses. Usually, this number is the data call phone number of your phone.

Use PPP compression—When set to Yes, this option speeds up the data transfer, if

supported by the remote PPP server. If you have problems with establishing a

connection, try setting this to No. Contact your service provider for guidance.

Use login script—The options are Yes or No.

Modem initialization (modem initialization string)—Controls your phone using

modem AT commands. If required, enter characters specified by your service

provider or Internet service provider.

GPRS

GPRS (general packet radio service) is a network service that allows mobile phones

to be used for sending and receiving data over an IP-based network. GPRS is a data

bearer that enables wireless access to data networks, such as the mobile Internet.

The applications that may use GPRS are multimedia, IM and text messaging,

presence, streaming, browsing sessions, e-mail, data sync, Java™ application

downloading, and the PC dial-up (such as Internet and e-mail).

To use GPRS technology, you must first do the following:

• Contact your service provider for availability and subscription to the GPRS

service.

• Save the GPRS settings for each of the applications used over GPRS.

For information on pricing, contact your service provider.

To define GPRS connection settings, select Menu > Settings > Connection >

GPRS, and the following:

GPRS connection—If you select When available and you are in a network that

supports packet data, the phone registers to the GPRS network. Also, starting an

active packet data connection, for example, to send and receive e-mail, is quicker.

If you select When needed, the phone will use a packet data connection only if you

start an application or action that needs it. The GPRS connection can be closed

after it is not used by any application.

If there is no GPRS coverage and you have chosen When available, the phone will

periodically try to establish a packet data connection.

Access point—The access point name is needed when you want to use your phone

as a packet data modem to your computer.

Settings

FCC DRAFT

PRELIMINARY

Data call

Online time—This setting affects all access points using a GSM data call. If there

are no actions, the data call is dropped automatically after a time-out period.

Select User defined (in which case you enter a time) or Unlimited.

Configurations

When you open a message that contains configuration settings for your phone, the

message is displayed in this viewer. If you do not have any configuration settings

messages, this screen will be empty. To delete a message from this screen, press the

Clear key.

Options in the configurations viewer are Save,Message details, and Move to folder.

•DATE AND TIME

Select Menu > Settings > Date and time.

The Date and time settings allow you to define the date and time used in your

phone, as well as change the date and time format and separators. You can also

change the following settings:

Clock type—Select Analog or Digital to change how the clock is displayed in the

standby mode. See "Clock" on page 86.

Clock alarm tone—Changes the tone played when the clock reaches an alarm time.

Auto time update—Allows the network to update time, date, and time zone

information to your phone (network service). For the auto time update setting to

take effect, the phone needs to be restarted. Check any alarms because they may

be affected by the auto time update.

GMT offset—Changes the time zone for the clock time.

Daylight-saving—Sets daylight saving time on or off.

•SECURITY

Select Menu > Settings > Security > Phone and SIM or

Certif. management.

Phone and SIM

If your phone requests a security code, refer to the following explanations to

determine what you should enter. If you forget or lose a PIN or PUK code or if you

have not received such a code, contact your service provider.

FCC DRAFT

PRELIMINARY

You can change the following codes: lock code, PIN code, and PIN2 code. These

codes can only include the numbers from 0 to 9.

The PUK (personal unblocking key) code is required to change a blocked PIN code.

The PUK2 code is required to change a blocked PIN2 code. If the codes are not

supplied with the SIM card, contact your service provider for the codes. The PUK

and PUK2 codes are 8 digits long.

Avoid using security codes similar to emergency numbers, such as 911, to prevent

accidental dialing of the emergency number.

PIN code request—When the PIN code request is active, the code is requested each

time the phone is switched on. Note that deactivating the PIN code request may

not be allowed by some SIM cards.

PIN code (4 to 8 digits)—The PIN code protects your SIM card against unauthorized

use. The PIN code is usually supplied with the SIM card.

After three consecutive incorrect PIN code entries, the PIN code is blocked. If the

PIN code is blocked, you need to unblock the PIN code before you can use the SIM

card again. See also the information below about the PUK code.

PIN2 code (4 to 8 digits)—The PIN2 code is supplied with some SIM cards and is

required to access some functions, such as fixed dialing numbers (FDN).

Autolock period—You can set an autolock period, a time-out after which the

phone is automatically locked and can be used only if the correct lock code is

entered. Key in a number for the time-out in minutes, or select None to turn off

the autolock period.

To unlock the phone, key in the lock code.

When the phone is locked, calls may still be possible to the official emergency

number programmed into your phone.

Lock code (5 digits)—The lock code can be used to lock the phone and keypad to

avoid unauthorized use. The factory setting for the lock code is 12345. To prevent

unauthorized use of your phone, change the lock code. Keep the new code secret

and in a safe place separate from your phone. If you forget or lose the lock code,

contact your service provider.

Lock if SIM changed—Select Yes if you want the phone to prompt for the lock code

when an unknown, new SIM card is inserted into your phone. The phone maintains

a list of SIM cards that are recognized as the owner’s cards.

Fixed dialing—You can restrict your outgoing calls to selected phone numbers, if

supported by your SIM card. You need the PIN2 code for this function. When this

function is active, you can only call those phone numbers that are included in the

fixed dialing list or which begin with the same digits as a phone number on the list.

Settings

FCC DRAFT

PRELIMINARY

Press the middle of the scroll key to set fixed dialing on. When fixed dialing is

activated, calls still may be possible to the official emergency number programmed

into your phone. To add new numbers to the fixed dialing list, select Options >

New contact or Add from Contacts.

Options in fixed dialing are Open,Call,Activ. fixed dialing or Deact. fixed dialing,

New contact,Edit,Delete,Add to Contacts,Add from Contacts,Find,Mark/Unmark,

Help, and Exit.

Closed user group (network service)—You can specify a group of people whom you

can call and who can call you. For more information, contact your network operator

or service provider. Select one of the following:

•Default—Activate the default group agreed on with the network operator.

•On—Use another group (you need to know the group index number).

•Off—Do not use closed user groups.

When calls are limited to closed user groups, calls still may be possible to the

official emergency number programmed into your phone.

Confirm SIM services (network service)—Sets the phone to display confirmation

messages when you are using a SIM card service.

Restore server—Reset your connection settings allowing you to receive new

settings from your service provider.

Certif. management

Options in Certif. management are Certificate details,Delete,Trust settings,Mark/

Unmark,Help, and Exit.

In the certificate management main view, you can see a list of authority

certificates that have been stored in your phone. Scroll right to see a list of

personal certificates, if available.

Authority certificates are used by some browser services, such as banking services,

for checking signatures or server certificates or other authority certificates.

Server certificates are used to improve security in the connection between the

phone and the gateway. The phone receives the server certificate from the service

provider before the connection is established, and its validity is checked using the

authority certificates saved in the phone. Server certificates are not saved.

Server certificates may be needed, for example, when you want to do the following:

•Connect to an online bank or another site or remote server for actions that

involve transferring confidential information.

•Decrease the risk of viruses or other malicious software and be sure of the

authenticity of software when downloading and installing software.

FCC DRAFT

PRELIMINARY

Important:Note that even if the use of certificates makes the risks

involved in remote connections and software installation considerably

smaller, they must be used correctly in order to benefit from increased

security. The existence of a certificate does not offer any protection by

itself; the certificate manager must contain correct, authentic, or trusted

certificates for increased security to be available. Certificates have a

restricted lifetime. If Expired certificate or Certificate not valid yet is

shown even if the certificate should be valid, check that the current date

and time in your device are correct.

Before changing any certificate settings, you must make sure that you

really trust the owner of the certificate and that the certificate really

belongs to the listed owner.

CHANGE THE TRUST SETTINGS OF AN AUTHORITY CERTIFICATE

Scroll to an authority certificate, and select Options > Trust settings. Depending

on the certificate, a list of the applications that can use the selected certificate is

shown. For example:

•Internet—The certificate is able to certify e-mail and imaging servers.

•App. installation—The certificate is able to certify the origin of new software.

•CALL RESTRICTION (NETWORK

SERVICE)

Select Menu > Settings > Call restriction.

Call restriction allows you to restrict outgoing and incoming calls with your phone.

For this function, you need the restriction password, which you can obtain from

your service provider.

Select Options, and choose one of the following:

Activate—Request the network to set call restriction on.

Cancel—Set the selected call restriction off.

Check status—Check if the calls are blocked or not.

Edit restr. passw.—Change the restriction password.

Cancel all restrict.—Cancel all active call restrictions.

You cannot restrict incoming calls while call forwarding or fixed dialing is active.

See "Call forwarding (network service)" on page 21. See also “Security” on page 69.

When calls are restricted, calls still may be possible to certain official emergency

numbers.

Settings

FCC DRAFT

PRELIMINARY

•NETWORK

Select Menu > Settings > Network > Operator selection or Cell info

display.

Operator selection

Automatic—Set the phone to automatically search for and select one of the

cellular networks available in your area.

Manual—Select the desired network manually from a list of networks. If the

connection to the manually selected network is lost, the phone will sound an error

tone and ask you to select a network again. The selected network must have a

roaming agreement with your home network, that is, the operator whose SIM card

is in your phone.

Cell info display

On or Off—Set the phone to indicate when it is used in a cellular network based on

microcellular network (MCN) technology and to activate cell info reception

(network service).

•ENHANCEMENT

Select Menu > Settings > Enhancement and one of the following:

Enhancement in use—If you are using an enhancement such as a loopset, headset,

or TTY adapter, you must activate it by selecting Headset, Loopset, or TTY. If you

have activated a loopset, the headset will use the same settings as the loopset.

Headset,Loopset,TTY, and Handsfree—For each of these items, define the

following settings:

•Default profile—Select the profile you want to be activated each time you

connect a certain enhancement to your phone. See "Change the profile" on

page 80.

•Automatic answer—Set the phone to answer an incoming call automatically

after 5 seconds time when you connect a certain enhancement to your phone.

If the incoming call alert is set to Beep once or Silent, automatic answer

cannot be used, and you must answer the phone manually. This option is not

available for TTY.

See also “Enhancement indicators” on page 13.

FCC DRAFT

PRELIMINARY

9 Tools and applications

Select Menu > Tools to access common tools and applications. For instructions on

voice mail and 1-touch dialing, see “Call voice mail” on page 18 and “1-touch

dialing” on page 19.

•APPLICATION MANAGER

Select Menu > Tools > Manager.

In App. manager you can install new compatible Symbian operating system

applications (SIS files) and Java applications (Java MIDlets and MIDlet suites). You

can also update and uninstall applications from the phone and monitor the

installation history.

Applications in App. manager use shared memory. See "Shared memory" on page 3.

Options in App. manager are Install,View details,View certificate,Update,Go to

web address,Remove,View log,Send log,Settings,App. downloads,Help, and Exit.

When you open App. manager, you can see a list of:

•Applications saved in App. manager

•Partially installed applications (indicated by

)

•Fully installed applications that you can remove

(indicated by )

You can only use Symbian operating system

applications with a .SIS extension.

Your phone supports J2ME™Java applications. Do

not download PersonalJava™ applications to your

phone; they cannot be installed.

Install applications

You can install applications that are specifically intended for this phone and

suitable for the Symbian operating system.

If you install an application that is not intended specifically for this phone, it may

function and look different from what was originally intended.

Applications may be downloaded to your phone during browsing, received as

attachments in multimedia messages or e-mails, or received by Bluetooth

connection from another device, for example, a phone or a compatible PC.

Tools and applications

FCC DRAFT

PRELIMINARY

Important: Only install applications from sources that offer adequate

protection against harmful software.

To increase protection, the application installation system uses digital signatures

and certificates for applications. Do not install the application if App. manager

gives a security warning during installation.

If you install an application that contains an update or repair to an existing

application, you can only restore the original application if you have the original

application or a full backup copy of the removed application. To restore the original

application, first remove the updated or repaired application and then install again

from the original application or the backup copy.

During installation, the phone checks the integrity of the application to be

installed. The phone shows information about the checks being carried out, and you

are given options on whether to continue or cancel the installation. Once the

phone has checked the integrity of the application, it is installed on your phone.

INSTALL APPLICATIONS

Open App. manager, scroll to the application, and select Options > Install to start

the installation.

You can also search the phone memory or the memory card, select the application,

and press the middle of the scroll key to start the installation.

Some applications may give the option of partial installation, allowing you to

select the particular components of an application that you want to install. If you

are installing an application without a digital signature or a certificate, the phone

warns you of the risks. Continue installation only if you are absolutely sure of the

origin and contents of the application.

INSTALL JAVA™ APPLICATIONS

The .JAR file is required for installation. If it is missing, the phone may ask you to

download it. If there is no access point defined for App. manager, you will be asked

to select one. When you are downloading the .JAR file, you may need to enter a

user name and password to access the server. You obtain these from the supplier

or manufacturer of the application.

•To start a data connection and to view extra information about the

application, scroll to it and select Options > Go to web address.

•To start a data connection and check if there is an update available for the

application, scroll to it and select Options > Update.

JAVA SETTINGS

To change the default access point that a Java application uses for downloading

extra data, select Options > Settings > Access point. See "Access points" on

page 66.

FCC DRAFT

PRELIMINARY

To change the security settings that determine the actions that a Java application

is permitted to do, select Options > Settings. Not all Java applications permit you

to change the security settings.

Remove an application

1Scroll to the application and select Options > Remove.

2Press Yes to confirm the removal.

If you remove an application, you can only re-install it if you have the original

application or a full backup of the removed application. If you remove an

application, you may no longer be able to open documents created with that

application. If another application depends on the application that you removed,

the other application may stop working. Refer to the documentation of the

installed application for details.

•FILE MANAGER

Select Menu > Tools > File mngr.

Options in File manager are Open,Send,Delete,Move to folder,Copy

to folder,New folder,Mark/Unmark,Rename,Find,View details,Memory details,

Help, and Exit.

In File manager, you can browse, open, and manage files and folders in the phone

memory or on the memory card, if you use one.

Open File manager to see a list of the folders in the phone memory. Scroll right to

see the folders on the memory card, if you use one.

You can browse, open, and create folders, mark, copy and move items to folders.

See "Common actions for all applications" on page 15.

Not all folders are visible in File manager (for example, system folders are not

visible).

View memory consumption

If you have a memory card installed on your phone, you will have a choice of two

memory views, one for the phone memory and one for the memory card.

Scroll right or left to move from one memory tab to another.

To check memory consumption of the current memory, select Options > Memory

details.

The phone calculates the approximate amount of free memory for storing data and

installing new applications.

Tools and applications

FCC DRAFT

PRELIMINARY

In the memory views, you can view the memory consumption of the different data

groups: Calendar,Contacts,Documents,Messages,Images,Sound files,Video

clips,Applications,Mem. in use, and Free memory.

•VOICE COMMANDS

Select Menu > Tools > Voice com.

Options in Voice commands are Add voice command,Open,New application,

Playback,Change,Delete,Delete all,Help, and Exit.

You can use voice commands to start applications and profiles, and to dial numbers

from Contacts, without having to look at the phone display. You record a word, or

words, (voice command) and then say this voice command to open an application,

activate a profile, or dial a number.

You can have only one voice command per item. Any spoken words can be a voice

command.

When recording, hold the phone at a short distance away from your mouth. After

the starting tone, say clearly the word, or words, you want to record as a voice

command.

Voice commands have the same requirements as voice tags. Before recording a

voice command, see “Requirements for voice tags” on page 26.

Note: You must say the voice command exactly as you said it when you

recorded it. This may be difficult in, for example, a noisy environment or

during an emergency, so you should not rely solely upon voice commands

in all circumstances.

Add a voice command to an application

1InVoice commands, scroll to the application to which you want to add a voice

command, and select Options > Add voice command. To add a voice

command to a profile, the Profiles folder must be opened and a specific profile

selected.

Press ’Start’, then speak after tone is displayed.

2Press Start to record a voice command.

The phone sounds a starting tone, and the note Speak now is displayed.

3Say the voice command.

The phone will stop recording after approximately 5 seconds. After recording,

the phone plays the recorded command. Voice command saved is displayed,

and a beep sounds. A symbol can be seen next to the application.

If you do not want to save the recording, press Quit before the recording stops.

FCC DRAFT

PRELIMINARY

Add an application to the list

You can assign voice commands to other applications that are not listed in the

Voice commands main view.

1In the Voice commands main view, select Options > New application.

Available applications are displayed.

2Scroll to the application that you want to add, and press Select.

3Add a voice command to the new application. See "Add a voice command to

an application" on page 77.

Use a voice command to start an application

1In the standby mode, press and hold the Right selection key.

A short tone is played, and Speak now is displayed.

2When you start an application by saying a voice command, hold the phone a

short distance from your mouth, and say the voice command clearly.

The phone plays the original voice command and starts the application.

3If the phone plays the wrong voice command, press Retry.

Replay, erase, or change a voice command

To replay, erase, or change a voice command, scroll to the item that has a voice

command (indicated by ), and select Options and one of the following:

Playback—Listen to the voice command again.

Delete—Erase the voice command.

Change—Record a new voice command. Press Start to record.

•DEVICE MANAGER

This feature is operator dependent and may not be available on all

phones. Contact your service provider for information and availability.

Select Menu > Tools > Dev. mgr.

Options in Device manager are Connect,New profile,Edit profile,Delete profile,

Enable or Disable configurations,View log,Help, and Exit.

When you need help with difficult phone configurations, Device manager allows a

third party, such as your service provider, to assist you directly with phone settings.

To allow device management, your phone must establish a connection and

Tools and applications

FCC DRAFT

PRELIMINARY

synchronize with the third party’s server. You can start the synchronization session

from your phone, and you can accept or reject server-initiated synchronization

attempts.

A device manager profile must be defined before you can connect to a server. The

third party who is assisting you can help define the profile settings:

Server name—Display name of the server.

Server ID—Remote device manager server ID.

Server password—Password used in server alerts. Enter the password that must be

provided by the device manager server when synchronizing with your phone.

Access point—Internet access point your phone uses to establish the server

connection. Choose from the list of access points defined in your phone. See

"Access points" on page 66.

Host address—Device management server URL.

Port—Device management server port.

User name—Your user name for this profile.

Password—Your password for this profile.

Allow configuration—Device management allowed on this server. Select Yes or No.

Auto-accept all reqs.—Automatic or approved device management on this server.

Select Yes to allow synchronization without your verification, or select No to verify

each synchronization attempt.

FCC DRAFT

PRELIMINARY

10 Personalization

•PROFILES

Select Menu > Profiles.

Use Profiles to adjust and customize sound tones for different events,

environments, or caller groups.

The currently selected profile is defined at the top of the display in the standby

mode. If the Normal profile is in use, only the current date is shown.

Options in Profiles are Activate,Customize,Create new,Delete profile,Help, and

Exit.

Change the profile

1Select Menu > Profiles.

A list of profiles opens.

2Scroll to a profile, and select Options > Activate.

Shortcut: To change the profile in the standby mode, press the Power key briefly,

scroll to the profile you want to activate, and press OK.

Create and customize profiles

To create a new profile, select Options > Create new. To modify a profile, select

Options > Customize.

Scroll to the setting you want to change and press the middle of the scroll key to

open the choices:

Ringing tone—Set the ringing tone for voice calls. Choose a ringing tone from the

list. Press any key to stop the sound. If a memory card is used, tones stored on it

have the icon next to the tone name. Ringing tones use shared memory. See

"Shared memory" on page 3. You can also change ringing tones in Contacts. See

"Add a ringing tone for a contact card or group" on page 26.

Ringing type—When Ascending is selected, the ringing tone volume starts from

level one and increases level by level to the set volume level.

Ringing volume—Set the volume level for the ringing and message alert tones.

Message alert tone—Set the tone for messages.

IM alert tone—Set the tone for instant messages.

Vibrating alert—Set the phone to vibrate at incoming voice calls and messages.

Keypad tones—Set the volume level for keypad tones.

Personalization

FCC DRAFT

PRELIMINARY

Warning tones—Instruct the phone to sound a warning tone, for example, when

the battery is running low on power.

Alert for—Set the phone to ring only with calls from phone numbers that belong

to a selected contact group. Phone calls coming from people outside the selected

group will have a silent alert. You can select All calls, or you can select items from

a list of contact groups, if you have created them. See "Create contact groups" on

page 28.

Availability—Choose Available,Busy, or Not available to be displayed as your

presence information for the selected profile. This option is displayed only if you

activate the proper Sync. with Profiles setting in the Presence application. See

"Presence settings" on page 32.

User availab. alerts—Enter a customized message (up to 40 characters) to display

your current presence status for the selected profile. This option is displayed only

if you activate the proper Sync. with Profiles setting in the Presence application.

See "Presence settings" on page 32.

Profile name—If you are creating a new profile, use this setting to give it a name.

You can rename a profile and give it any name you want. The Normal profile cannot

be renamed.

•THEMES

Select Menu > Themes.

You can change the look of your phone display by

activating a theme. A theme can include the idle

screen wallpaper, color palette, screen saver, and

icons and background image in Go to. Edit a theme

for more detailed personalization.

When you open Themes you will see a list of the

available themes. The currently active theme is

indicated by a check mark. Scroll right to see the

themes on the memory card, if you use one.

To preview a theme, scroll to the theme, and select

Options > Preview. Press Select to activate the

theme. You can activate the theme without

previewing it by selecting Options > Apply from the main view.

Options in Themes are Preview,Apply,Edit,Copy to mem. card,Copy to phone mem.,

Theme downloads,Delete,Help, and Exit.

FCC DRAFT

PRELIMINARY

Edit themes

To personalize themes further, you can group together elements from other themes

or images from Gallery:

1Scroll to a theme, and select Options > Edit to change the following options:

Wallpaper—Choose an image to use as a background image in the standby

mode. Select an image from one of the available themes or from Gallery,

where your own images are saved.

Color palette—Change the color used on the display.

Screen saver—Select what is shown on the screen saver bar. Choose to display

the time and date or write the text you want displayed. The location and

background color of the screen saver bar changes in one minute intervals.

Also, the screen saver changes to indicate the number of new messages and

missed calls. You can set the time that elapses before the screen saver is

activated. See "Standby mode" on page 64.

Image in ‘Go to’—Choose an image to use as a background image in Go to.

You can select an image from one of the available themes or from Gallery,

where your own images are saved.

2Select Back to accept the changes.

3Select Options > Set to select the current theme. You can preview the

updated theme by selecting Options > Preview. Note that you cannot preview

all elements.

Restore themes

To restore the currently selected theme to its original settings, select Options >

Restore orig. theme when editing a theme.

•GO TO

Press Go to (Right selection key) in the standby mode, or select Menu >

Go to.

Use Go to to store shortcuts, links to your favorite photos, video clips, notes,

recorder sound files, browser bookmarks, and saved browser pages.

Options in Go to are Open,Edit shortcut name,Shortcut icon,Delete shortcut,

Move,List view or Grid view,Help, and Exit.

Default shortcuts in Go to: —opens Calendar to the current date, —opens the

Messaging inbox, and —opens the Notes editor.

Personalization

FCC DRAFT

PRELIMINARY

Shortcuts can be added only from pre-installed

applications and functions. Not all applications

have this functionality.

1Open the application and scroll to the item that

you want to add as a shortcut.

2Select Options > Add to ’Go to’, and press OK.

A shortcut in Go to is automatically updated if you

move the item to which it is pointing, for example,

from one folder to another.

Hints on using shortcuts:

•To open a shortcut, scroll to the icon and press

the middle of the scroll key. The file is opened in the corresponding application.

•To delete a shortcut, scroll to the shortcut you want to remove, and select

Options > Delete shortcut. Removing a shortcut does not affect the file to

which it refers.

•To change the shortcut name, select Options > Edit shortcut name. Write the

new name. This change affects only the shortcut, not the file or item to which

the shortcut refers.

FCC DRAFT

PRELIMINARY

11 Extras

•NOTES

Select Menu > Extras > Notes.

You can link notes to Go to and send them to other devices. Plain text files (TXT

format) you receive can be saved to Notes.

Press any key from 1 to 0 to start to write. Press the Clear key to clear letters. Press

Done to save.

•CALCULATOR

Select Menu > Extras > Calculator.

Options in the calculator are Last result,Memory,Clear screen,Help, and Exit.

1Enter the first number of your calculation.

To add a decimal, press the #key.

If you make a mistake, press the Clear key to erase it.

2Scroll to an arithmetic function and press the middle of the scroll key to select

it.

3Enter the second number.

4To execute the calculation, scroll to and press the middle of the scroll key.

Press and hold the Clear key to clear the result of the previous calculation.

Use and to view previous calculations and move in the sheet.

Note: This calculator has limited accuracy and is designed for simple

calculations. Rounding errors may occur, especially in long division.

•CONVERTER

Select Menu > Extras > Converter.

In Converter, you can convert measures from one unit to another; for example, you

can convert length from yards to meters. Converter has limited accuracy and

rounding errors may occur.

Extras

FCC DRAFT

PRELIMINARY

Convert units

Options in Converter are Conversion type,Currency rates (not applicable to other

units), Help, and Exit.

To make currency conversions, you must first set the exchange rate. See "Set a base

currency and exchange rates" on page 85.

1Scroll to Type, and press the middle of the scroll key to open a list of measures.

2Scroll to the measure you want to use, and press OK.

3Scroll to the first Unit field, and press the middle of the scroll key to open a

list of available units.

4Select the unit from which you want to convert, and press OK.

5Scroll to the next Unit field, and select the unit to which you want to convert.

6Scroll to the first Amount field, and key in the value you want to convert.

Press the #key to add a decimal, and press the *key to insert the +,- (for

temperature), and E (exponent) symbols.

The second Amount field changes automatically to show the converted value.

The conversion order changes if you write a value in the second Amount field.

The result is shown in the first Amount field.

Set a base currency and exchange rates

Before you can make currency conversions, you must choose a base currency

(usually your domestic currency) and add exchange rates. The rate of the base

currency is always 1. The base currency determines the conversion rates of the

other currencies.

1Select Currency as the measure type, and select Options > Currency rates.

A list of currencies opens with the current base currency at the top.

2To change the base currency, scroll to the currency (usually your domestic

currency), and select Options > Set as base curr.

When you change base currency, all previously set exchange rates are reset to

zero, and you must enter new rates.

3Add exchange rates, scroll to the currency, and key in a new rate, that is, how

many units of the currency equal one unit of the base currency you have

selected.

4After you have inserted all the required exchange rates, make the currency

conversions. See "Convert units" on page 85.

FCC DRAFT

PRELIMINARY

•VOICE RECORDER

Select Menu > Extras > Recorder.

Options in Voice recorder are Record sound clip,Delete,Rename sound clip,Send,

Go to Gallery,Settings,Add to ’Go to’,Help, and Exit.

The voice recorder allows you to record telephone conversations and voice memos.

If you are recording a telephone conversation, both parties will hear a tone every

5 seconds during recording. Voice recorder cannot be used when a data call or

GPRS connection is active.

Recorded files are stored in Gallery. See "Gallery" on page 42.

Select Options > Record sound clip, scroll to a function, and press the middle of

the scroll key to select it:

•CLOCK

Select Menu > Extras > Clock.

Options in Clock are Set alarm,Reset alarm,Remove alarm,Settings,Help, and Exit.

Change settings

To change the time or date, select Options > Settings. See also “Date and time” on

page 69.

Set an alarm

1To set a new alarm, select Options > Set alarm.

2Enter the alarm time, and press OK.

When the alarm is active, the indicator is shown.

To cancel an alarm, select Clock > Options > Remove alarm.

Record

Pause

Stop

Fast forward

Fast rewind

Play an opened sound file

Extras

FCC DRAFT

PRELIMINARY

Stop an alarm

Press Stop to turn off the alarm.

Press any key or select Snooze to stop the alarm for 5 minutes, after which it will

resume. You can do this a maximum of 5 times.

If the alarm time is reached while the phone is switched off, the phone switches

on and starts sounding the alarm tone. If you press Stop, you receive a message

asking whether you want to activate the phone for calls. Press No to switch off the

phone or Yes to make and receive calls.

Do not press Yes when wireless phone use is prohibited or when it may cause

interference or danger.

Personalize the alarm tone

1To personalize the alarm tone, select Options > Settings > Clock alarm tone.

When you scroll through the list of tones, you can stop on a tone to listen to

it before you make your selection.

2Press Select to select the current tone.

•MEMORY CARD

Select Menu > Extras > Memory.

Options in Memory card are Backup phone mem.,Restore from card,Format mem.

card,Memory card name,Set password,Change password,Remove password,

Memory details,Help, and Exit.

Keep all memory cards out of the reach of small children.

For details on inserting a memory card into the phone, see “Insert the memory card”

on page 8. You can use the memory card to back up information from phone

memory and to store your multimedia files such as video clips, sound files, photos,

messaging data, etc.

Your phone may come with a RS-MMC containing applications from other

companies that are designed for use on your phone. Nokia does not provide any

warranty or support for these applications. Contact the content provider for any

assistance needed.

BY USING THE APPLICATIONS PROVIDED ON THE RS-MMC, YOU ACKNOWLEDGE

THE SOFTWARE AND/OR APPLICATIONS (COLLECTIVELY, THE "SOFTWARE") ARE

PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED AND

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW NEITHER NOKIA NOR

ITS AFFILIATES MAKE ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR

FCC DRAFT

PRELIMINARY

IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE,

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR THAT THE

SOFTWARE WILL NOT INFRINGE ANY THIRD PARTY PATENTS, COPYRIGHTS,

TRADEMARKS OR OTHER RIGHTS.

THERE IS NO WARRANTY BY NOKIA OR BY ITS AFFILIATES THAT ANY ASPECT OF THE

SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE

SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. YOU ASSUME ALL

RESPONSIBILITY AND RISK FOR THE SELECTION OF THE SOFTWARE TO ACHIEVE

YOUR INTENDED RESULTS AND FOR THE INSTALLATION, USE AND RESULTS

OBTAINED FROM IT. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

IN NO EVENT SHALL NOKIA, ITS EMPLOYEES OR AFFILIATES BE LIABLE FOR ANY

LOST PROFITS, REVENUE, SALES, DATA, INFORMATION OR COSTS OF

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, PROPERTY DAMAGE,

PERSONAL INJURY, INTERRUPTION OF BUSINESS, OR FOR ANY DIRECT, INDIRECT,

INCIDENTAL, ECONOMIC, COVER, PUNITIVE, SPECIAL OR CONSEQUENTIAL

DAMAGES, HOWEVER CAUSED AND WHETHER ARISING UNDER CONTRACT, TORT,

NEGLIGENCE, OR OTHER THEORY OF LIABILITY ARISING OUT OF THE INSTALLATION

OR USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF NOKIA OR ITS AFFILIATES

ARE ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME

COUNTRIES/STATES/JURISDICTIONS DO NOT ALLOW THE ABOVE EXCLUSION OR

LIMITATION OF LIABILITY, BUT MAY ALLOW LIABILITY TO BE LIMITED, IN SUCH

CASES, NOKIA, ITS EMPLOYEES’ OR AFFILIATES' LIABILITY SHALL BE LIMITED TO

U.S.$50. Nothing contained in this disclaimer shall prejudice the statutory rights

of any party dealing as a consumer.

Attach and remove the memory card adapter

The RS-MMC comes with an adapter attachment that allows you to use the card

in regular sized MMC slots (for instance, in other Nokia phones or in a card reader).

Be sure to remove the adapter when you use

the RS-MMC in your Nokia 7610 phone.

To remove the adapter, press the arrow labeled

Push to release the catch (1), and gently pull

the RS-MMC away from the adapter (2).

To reattach the adapter, locate the long side of

the RS-MMC opposite from the side with the

bevelled corner, and slide the notched corners

into the metal slots of the adapter.

Make sure the RS-MMC is attached securely

to the adapter before you attempt to use the

card in another Nokia phone or in a card

reader.

Extras

FCC DRAFT

PRELIMINARY

Format memory card

When a memory card is formatted, all data on the card is permanently lost.

Some memory cards are supplied preformatted and others require formatting. The

memory card supplied with your Nokia 7610 phone is preformatted. Consult your

retailer to find out if you must format other memory cards before you can use

them.

You can use File manager to check for data on a memory card before formatting

it. See "File manager" on page 76.

To format a memory card, select Options > Format mem. card, and select Yes to

confirm. When formatting is complete, key in a name for the memory card (up to

11 letters or numbers).

Back up and restore information

You can back up the phone memory and restore it to your phone. To back up

information from phone memory to the memory card, select Options > Backup

phone mem.

To restore information from the memory card to phone memory, select Options >

Restore from card.

Lock the memory card

You can set a password to lock your memory card against unauthorized use. Select

Options > Set password. You will be asked to enter and confirm your password.

The password can be up to eight characters long.

The password is stored in your phone and you do not have to enter it again while

you are using the memory card on the same phone. If you want to use the memory

card on another phone, you will be asked for the password again to unlock the card.

Unlock a memory card

If you insert another password-protected memory card in your phone, you will be

prompted upon startup to enter the password of the card. Enter the password, and

press OK to unlock the card, or press Cancel to leave the card locked. To unlock the

card later, select Menu > Extras > Memory > Options > Unlock memory card.

Enter the password, and press OK.

Remove memory card password

To remove a memory card password entirely, select Options > Remove password.

Once the password is removed, the memory card is unlocked and can be used on

your phone or another phone without a password.

FCC DRAFT

PRELIMINARY

Check memory consumption

You can check the memory consumption of different data groups and the available

memory for installing new applications or software on your memory card. Select

Options > Memory details.

•WALLET

Select Menu > Extras > Wallet.

Wallet provides you with a storage area for your personal information, such as

credit and debit card numbers, addresses, and other useful data (for example, user

names and passwords).

The information stored in the wallet can be easily

retrieved while browsing to automatically fill in

online forms on browser pages, for example, when

the service asks for credit card details. Data in the

wallet is encrypted and protected with a wallet code

that you define.

You can group wallet data into profiles that can be

accessed, for example, for making purchases online.

Because of the nature of the wallet, it will

automatically close after 5 minutes. Enter the wallet

code to regain access to the contents. You can

change this automatic time-out period, if required.

See "Wallet settings" on page 93.

Options in Wallet are Open,Settings,Help, and Exit.

Enter the wallet code

Each time you open the wallet you will be prompted for a wallet code.

When you open the wallet for the first time, you must create your own security

code:

1Enter a code of your choice (4–10 alphanumeric characters), and press OK.

You will be prompted to verify the code.

2Enter the same code, and press OK.

Do not give your wallet code to anyone else.

If you enter the wallet code incorrectly on three consecutive attempts, the

wallet application is blocked for 5 minutes. The blocked time increases if

further incorrect wallet codes are entered.

Extras

FCC DRAFT

PRELIMINARY

If you forget your wallet code, you will have to reset the code, and you will lose all

information stored in the wallet. See "Reset the wallet and wallet code" on

page 93.

Store personal card details

Options when viewing or editing card details are Delete,Help, and Exit.

1Select Cards from the main wallet menu.

2Select a type of card:

Payment cards—Credit and debit cards

Loyalty cards—Membership and store cards

Online acc. cards—Personal user names and passwords to online services

Address cards—Basic contact details for home/office

User info cards—Customized personal preferences for online services

3Select Options > Create new.

An empty form opens.

4Fill in the fields, and press Done.

You can also receive card information directly to the phone from a card issuer or

service provider (if they offer this service). You are notified as to which category

the card belongs. Save or discard the card. You can view and rename a saved card,

but you cannot edit it.

You can open, edit, or delete the fields in the card. Any changes will be saved upon

exiting.

Create personal notes

Personal notes are a means of storing sensitive information, for example, a bank

account number. You can access the data in a personal note from the browser or

send a note as a message.

1Select Personal notes from the main wallet menu.

2Select Options > Create new.

An empty note opens.

3Press any key from 1 to 0 to start writing, and press the Clear key to clear

characters if necessary.

4Press Done to save.

FCC DRAFT

PRELIMINARY

Create a wallet profile

Once you have stored your personal details, you can combine them into a wallet

profile. Use a wallet profile to retrieve wallet data from different cards and

categories to the browser.

1Select Wallet profiles from the main wallet menu.

2Select Options > Create new.

A new wallet profile form opens.

3Enter a name for the profile in the Profile name field.

4Scroll to each of the following fields, and press the middle of the scroll key to

open a list of selections:

Payment card—Select a card from the list.

Loyalty card—Select a card from the list.

Online access card—Select a card from the list.

Shipping address—Select an address from the list.

Billing address—By default this is Use shipping ad. If you require a billing

address that is different from the shipping address, select one from the billing

address list.

User info card—Select a card from the list.

Receive e-receipt—Select a destination from the list.

Deliver e-receipt—Select To phone,To e-mail, or To pho. & e-mail.

RFID sending—Set to On or Off. Defines whether or not your unique phone

identification is sent with the wallet profile (for future development

dependent on RFID-based ticketing).

5Press Done to save the new profile.

Retrieve information from wallet to your browser

When using online mobile services supporting the wallet functionality, you can

upload the data stored in your wallet to automatically enter your details into an

online form. For example, by uploading your payment card details, you do not need

to key in the card number and expiration date each time you need them (depending

on the content being browsed). Also, you can retrieve your user name and password

stored as an access card when connecting to a mobile service that requires

authentication. See "Purchase an item" on page 108.

Extras

FCC DRAFT

PRELIMINARY

View ticket details

You can receive notifications of electronic tickets purchased online with the

browser. Received ticket notifications are stored in the wallet. To view the

notifications:

1Select Tickets from the main Wallet menu.

2Select Options > View.

The ticket details are displayed in a form. None of the fields in the ticket

notification form can be edited.

Options in Tickets are View,Delete,Rename,Mark/Unmark,Help, and Exit.

Wallet settings

Select Options > Settings from the main wallet menu to modify the following

items:

Wallet code—Change your wallet code. You will be prompted to enter the current

code, create a new code, and verify the new code.

RFID—Set the phone ID code, type, and sending options (for future development

dependent on RFID-based ticketing).

Automatic close—Change the automatic time-out period (1–60 minutes). After the

time-out period has elapsed, the wallet code must be re-entered to gain access to

the contents.

Reset the wallet and wallet code

To reset both the contents of the wallet and the wallet code:

1Key in *#7370925538# in the standby mode.

2Enter the phone lock code, and press OK. See "Security" on page 69.

3To confirm that the data is erased, press OK.

When opening the wallet again, you must enter a new wallet code. See "Enter the

wallet code" on page 90.

•GAMES

Select Menu > Games.

To start a game, scroll to the game icon, and press the scroll key. For instructions

on how to play the game, select Options > Help.

FCC DRAFT

PRELIMINARY

12 Instant messaging (IM)

(network service)

Select Menu > IM.

Options in Instant Messaging are Open,Login or

Logout,Settings,Help, and Exit.

Take text messaging to the next level by experiencing

instant messaging in a wireless environment. Engage

in instant messaging with friends and family as long

as you all use the same IM service. Check with your

wireless service provider for availability.

Before you can start using IM on your phone, you

must make sure that your phone can establish a GPRS

connection. You must also register with the IM

service you want to use. See “IM service provider icons” on page 94 for more

information.

Note: Due to variations in IM and wireless service providers, you may not

have access to all of the features described in this guide.

•IM SERVICE PROVIDER ICONS

Since each IM service has its own display text and icons associated with it, the

display text and icons on your phone may appear differently for each IM service

provider. If you have any questions about the differences in the various IM service

providers’ display text and icons, contact your wireless service provider for more

information. Examples of IM icons and their descriptions are as follows:

Contact online

Contact not logged in to IM

Contact blocked

Tracking set for contact

New unread message

Instant messaging (IM) (network service)

FCC DRAFT

PRELIMINARY

•REGISTER WITH AN IM SERVICE

Before you can use IM, you must register with an IM service to obtain an IM user

name and password. You can obtain an IM user name and password by registering

over the Internet (using your computer) with the IM service provider you have

selected to use. During the registration process, you will have the opportunity to

create the user name and password of your choice. For more information about

signing up for IM services, contact your wireless service provider.

•BEFORE USING IM

Before you can use the IM feature, your phone must have at least one access point

defined. See "Access points" on page 66. An IM server must also be defined in your

phone:

1Select Menu > IM > Options > Settings > Server settings > Servers.

2Select a server from the list, or select Options > New server to define a new

server.

If you need help defining a new server, contact your wireless service provider

or IM service provider.

You must also obtain a user name and password (see “Register with an IM service”

on page 95). For more information about signing up for instant messaging services,

contact your wireless service provider.

•LOG IN

Select Menu > IM > Options > Login, enter your user name and password, and

press OK. After you have logged into IM initially, you have the option of a manual

•IM SETTINGS

You can customize your IM settings, depending upon the IM service you have selected.

SelectOptions > Settings > IM settings from the main IM menu screen, and select

the following:

Use screen name—Select Yes to key in a nickname (up to 10 characters).

IM presence—Select one of the following options:

•Active for all—All other users see your status as online and you receive

availability information and messages from all other users.

FCC DRAFT

PRELIMINARY

•Active for cntcts.—Even though only the contacts in IM contacts see your

status as online, you receive availability information and messages from all

other users.

•Not active—Your status to other users appears to be offline from the IM

service, but you receive availability information and messages from all other

users.

Allow messages from and Allow invitations from—These settings define whether

you receive instant messages or group invitations from All,IM contacts only, or

None.

Message speed—Select the speed at which new messages are displayed.

Auto-reload availab.—Choose how to update information when your IM contacts

Reload user availab.—Use this setting to define which IM contacts are included in

a manual or automatic status update. Select For all contacts to refresh the status

information of all your IM contacts, or choose specific IM contacts.

Automatic login

You can log in automatically when you start the IM application. First you must

ensure that your IM user ID and password are entered for your IM server. To check

this, go to the IM main menu, and select Options > Settings > Server settings >

Servers and the IM server you are using. Scroll to the User ID and Password fields

to enter your information.

To turn automatic login on, scroll to the IM login type field in the Server settings

screen, and select On app. start-up. If you want to turn automatic login off, select

Manual.

Set up presence status updates

Presence allows you and other users to know who is online and available to chat.

You can set your phone to automatically update a contact’s presence status every

time it is changed. From the IM main menu, select Options > Settings >

IM settings > Reload user availab.

You can also designate whether your own presence information is updated when

you log in to IM. From the IM main menu, select Options > Settings > Server

settings > Presence login type > Automatic,Aut. in home net. (automatic in

home network), On app. start-up, or Manual.

For more information on the presence feature, see “Presence (network service)” on

page 29.

Instant messaging (IM) (network service)

FCC DRAFT

PRELIMINARY

•IM CONVERSATIONS

Select Menu > IM > Conversations.

Options in Conversations are Open,Delete,Add to IM

contacts,New conversation,Set auto reply on,Blocking

options,Close conversation,Settings,Help, and Exit.

You can send instant messages to anyone who uses

the same IM service as you do, as long as you have

that person’s user name. You can also add that person

to IM contacts during an IM conversation. See “IM

contacts” on page 98 for more information. More

than one IM conversation can be active at the same time.

Conversations lists all active conversations by IM contact name. Select one of the

names to open the conversation with that person. The contact’s name is displayed

at the top of the screen, and as the conversation progresses, the most recent

message appears at the bottom of the screen, causing the last message to move up

one level.

Start a conversation

You must be able to select a contact who is online before you can begin a

conversation.

1From the IM main menu, select Conversations.

2Select Options > New conversation > Select recipient or Enter User ID.

If you choose Select recipient, a list of your IM contacts who are currently

online is displayed. If you select Enter User ID, you must enter the exact user

ID of the contact.

After you select a recipient, a conversation view is opened with the recipient’s

name displayed at the top of the screen. The conversation is still active, even if you

leave the conversation view. You can return to it when you want by selecting

Conversations from the IM main menu.

Write and send to contact

1Start a new conversation or open an active one from Conversations.

2Enter your message in the field at the bottom of the screen. See "Write text"

on page 47.

3To send the message, press the middle of the scroll key, or select Options >

Send.

The message is displayed in the conversation view for that contact.

FCC DRAFT

PRELIMINARY

Receive message and reply

When you receive an instant message, your phone beeps (if the phone is not set to

the Silent profile) and the sender’s reply appears beneath the most recent message

in the conversation.

Select Conversations from the IM main menu and open the conversation with the

new message indicated by the icon. You can also select IM contacts from the

IM main menu, and the new message icon is displayed by the contact who sent you

the message. Select the name to open the conversation.

Save

To save your conversation or group chat, perform the following steps before you

end the conversation:

1From the conversation view or group conversation view, select Options >

Record convers.

2In the Conversation name screen, enter a name for the conversation, and

select OK.

The conversation is saved as a note under the Extras phone menu.

3To stop recording the conversation, select Options > Stop recording.

To view saved conversations, select Menu > Extras > Notes, and open the

conversation you want to view.

To delete a saved conversation, highlight it in the list of Notes documents, and

select Options > Delete.

End a conversation

Select Conversations from the IM main menu, open the conversation you want to

end, and select Options > End conversation.

•IM CONTACTS

Add to IM contacts the names of your friends and family with whom you want to

interact frequently through IM.

Options in IM contacts are Open conversation,Contact details,Switch tracking on or

off,New IM contact,Edit,Delete,Blocking options,My server contacts,Search,Settings,

Help, and Exit.

Add manually or from phone Contacts list

From the IM main menu, select IM contacts > Options > New IM contact and one

of the following:

Instant messaging (IM) (network service)

FCC DRAFT

PRELIMINARY

Enter manually—This option opens a new contact card. At a minimum, you must

enter an exact IM user ID in the User ID field. You may also enter a first name, last

name, and other contact numbers on this contact card. If you want to modify the

contact card later, see “Contacts” on page 25.

Add from Contacts—This option displays a list of entries from your contact

directory. To select a contact to add to your IM contacts list, scroll to the contact,

and press the middle of the scroll key to select it (this places an X in the box beside

the contact name). When you have chosen all the contacts you want to add, press

OK.

To search for a person or group that is currently online, from the IM contacts

screen, select Options > Search and one of the following:

Groups—Select this option to search for an IM group by Group name,Topic, or

Group members. If you search by group member, you must enter the member’s

exact IM user ID.

Users—Select this option to search for an IM user by User’s name,User ID,Phone

number, or E-mail address. The search criteria does not have to be an exact match

for the item for which you are searching.

Add contact to IM contacts during IM session

1Select Conversations from the IM main menu.

2Scroll to the contact you want to add, and select Options > Add to IM

contacts. You can also open the conversation, and select Options > Add to IM

contacts.

A contact card is opened for the new contact, and the contact’s IM user ID is

automatically entered in the User ID field. You may also specify a first name,

last name, and other contact phone numbers on this contact card.

3Select Options > OK.

Remove

From the IM main menu, select IM contacts, the contact you want to remove, and

Delete > Yes.

Block and unblock

To block a contact, select the contact name in IM contacts or in Conversations,

and select Options > Blocking options > Add to blocked list.

FCC DRAFT

PRELIMINARY

To unblock one or more contacts from the IM contacts list or from an open

conversation, select Options > Blocking options > Unblock, and scroll to the

contact and press the middle of the scroll key to select it (this places an X in the

box beside the contact name). When you have chosen all the contacts you want to

unblock, press OK.

View blocked list

From the IM contacts list or from an open conversation, select Options > Blocking

options > View blocked list.

Set or remove alert

To set an alert for a contact to notify you when the contact’s availability changes., go

to the IM contacts screen and select the contact for whom you want to set an alert;

then select Options > Switch tracking on.

To remove the alert, select Options > Switch tracking off.

•GROUP CHAT SESSIONS

Select IM groups from the IM main menu.

The group chat feature allows you to converse with

multiple participants simultaneously. You can create

your own private group chats or be invited to join a

live group chat in progress. During a group chat, all

messages are displayed in one group conversation

view screen. You can also save a group chat history.

See “Save” on page 98.

In IM groups, a list of IM groups that you have saved

or are currently joined to is shown. The icon next to a group indicates whether it is:

•A group that you have saved and are currently joined to ( or )

•A group that you have saved but are not currently joined to ( or )

•A group that you are currently joined to but have not saved ( )

Options in the IM groups view are Open,Join group,Create new group,Leave IM group,

IM group,Search,Settings,Help, and Exit.

Options when you have an IM group conversation open are Send, Send private msg.,

Reply,Forward,Send invitation,Leave IM group,Add to banned list,IM group,Record

convers. or Stop recording,Help, and Exit.

Create chat group

1From the IM main menu, select IM groups > Options > Create new group.

Instant messaging (IM) (network service)

FCC DRAFT

PRELIMINARY

2Select each of the following options and follow the prompts to enter the

appropriate information:

Group name—Enter a name for the new group, and select OK.

Group topic—Enter a conversation topic for the group, and select OK. The

default topic is General.

Welcome note—Enter a welcome note of up to 100 characters, and select OK.

The welcome note is displayed to any group member who logs in to the group.

Group size—Enter the maximum group size, and select OK. The default size is

100 members.

Allow search—Determine whether search engines are allowed to show the

chat group as a search result. Select either Yes or No.

Editing rights—Determine which group members should have rights to edit

group properties. To give a member editing rights, scroll to that member name

and press the middle of the scroll key to mark the name. When you are

finished, select OK. The Group creator always has editing rights and cannot

be unmarked.

Group members—Determine whether to restrict the chat group to a list of

members or to allow anyone to participate. Select either Selected only (chat

group is restricted to a list of members) or All (anyone can join the chat group).

See “Add and remove group members” on page 102 for more information.

Banned list—Select contacts that cannot join the group or send messages to

the group.

Allow private msgs.—Determine whether participants in the chat group are

allowed to send private messages during a group chat. Select either Yes or No.

3Select Back.

4Enter your screen name and select OK.

You are connected to the new group conversation in the group conversation

view.

Join or leave a chat group

From the IM main menu, select IM groups, and select the group you want to join.

Enter your screen name, and select OK. You are connected to the group

conversation in the group conversation view, and the name of the chat group is

displayed at the top of the screen.

To leave the group, select Options > Leave IM group.

FCC DRAFT

PRELIMINARY

Add and remove group members

You can restrict a chat group to selected members by adding and removing

contacts from the group members list.

1In the group conversation view, select Options > IM group > IM group

settings > Group members.

2Scroll to Selected only, and select OK.

The Group members screen is displayed.

3To add a member, at the Group members screen, select Options > Add

member, and one of the following:

•IM contact to select from your list of IM contacts.

•Enter user ID to enter the exact IM user ID.

4To remove a member, at the Group members screen, scroll to the contact’s

name, and select Options > Remove.

5To remove all group members, at the Group members screen, select Options >

Remove all.

6When you are finished designating group members, select Back and then Done

to return to the group conversation view.

Send an invitation for a group chat

Members must be online before you can invite them to a group chat.

1From the group conversation view, select Options > Send invitation.

2Scroll to the contacts whom you want to invite to the group chat, press the

middle of the scroll key to insert an X into the box beside the contact name,

and select OK.

3Enter an invitation message, and select Done.

The invitation is sent.

4To invite other members to the group, repeat steps 2–3.

When a member accepts an invitation, a message is displayed in the group

conversation view announcing that the member has joined.

Accept or reject invitations to group chat

When you receive an invitation to a group chat, select Accept, enter your screen

name, and select OK to accept the invitation.

To reject the invitation, select Reject.

Instant messaging (IM) (network service)

FCC DRAFT

PRELIMINARY

Chat with group members

All group chat messages are displayed in the group conversation view. The sender

name is displayed in front of each message.

Enter a message in the text entry area at the bottom of the screen; then select

Options > Send, or press the middle of the scroll key.

Your message is displayed in the group conversation view under the last message

received.

If you close the group conversation view while the group chat is still active, you

can return to it. In the IM main menu, select IM groups; then select the name of

the chat group.

Send a private message

While you are in a group chat, you can send a private message to one or more

members of the group. The message cannot be seen by other group members who

are not included in the private message.

1From the group conversation view, select Options > Send private msg.

2Select the contact to whom you want to send the private message.

3Enter the message; then select Options > Send, or press the middle of the

scroll key.

•LOG OFF SERVICE

To close the IM application and log out of the IM service at the same time, press

Exit from the IM main menu. Ongoing conversations are automatically closed

when you exit IM.

To log out of the IM service but leave the IM application open, go to the IM main

menu and select Options > Logout.

You can also exit the IM application but still stay connected to the IM service. Press

and hold the phone Menu key to bring up a list of open applications, and select

Telephone to return to the standby mode.

This enables you to receive instant messages from your contacts, when using your

phone for other purposes, for example, if you want to send a text message. If you

are connected to your IM service, but you have not used the IM application for

some time, you may be automatically disconnected from the IM service. The next

time you open the IM application, you must log in again. If you make a phone call,

you will be disconnected from the IM service.

To return to the IM application, you can either select Menu > IM, or you can press

and hold the Menu key again, and select IM from the list of open applications.

FCC DRAFT

PRELIMINARY

13 Web (mobile browser)

Select Menu > Web, or press and hold the 0key in the standby mode.

Various service providers maintain pages specifically designed for

mobile phones, offering services such as news, weather reports, banking, travel

information, entertainment, and games. With the mobile browser you can view

these services as WML, XHTML, or HTML pages.

If you have not yet used your phone to make a WAP connection, you may need to

contact your service provider for assistance with the first-time connection, or visit

www.nokia.com/phonesettings.

Check the availability of services, pricing, and tariffs with your network operator

and/or service provider. Service providers will also give you instructions on how to

use their services.

•BASIC STEPS FOR WEB ACCESS

1Save the settings that are needed to access the browser service that you want

to use. See "Browser service set-up" on page 104.

2Make a connection to the service. See "Make a connection" on page 105.

3Start browsing the web pages. See "Browse" on page 106.

4End the connection to the service. See "End a connection" on page 108.

•BROWSER SERVICE SET-UP

Receive settings in a smart message

You may receive service settings in a special text message called a smart message

from the network operator or service provider that offers the service. See "Smart

messages" on page 54. For more information, contact your network operator or

service provider.

Enter settings manually

Follow the instructions given to you by your service provider.

1Select Menu > Settings > Connection > Access points and define the

settings for an access point. See "Connection" on page 65.

2Select Menu > Web > Options > Bookmark manager > Add bookmark.

3Write a name for the bookmark and the address of the browser page defined

for the current access point.

Web (mobile browser)

FCC DRAFT

PRELIMINARY

•MAKE A CONNECTION

Once you have stored all the required connection settings, you can access browser

pages.

There are three different ways to access browser pages:

•Select the homepage ( ) of your service provider.

•Select a bookmark from the Bookmarks view.

•Press the keys 2–9 to start to write the address of a browser service. The Go to

field at the bottom of the display is immediately activated, and you can

continue to write the address there.

After you have selected a page or written the address, press the middle of the scroll

key to start downloading the page.

•BOOKMARKS

Your device may have some pre-installed bookmarks for sites not affiliated with

Nokia. Nokia does not warrant or endorse these sites. If you choose to access them,

you should take the same precautions for security or content as you would with

any site.

In the Bookmarks view, you can see bookmarks pointing to different kinds of

browser pages. When you scroll through bookmarks, you can see the address of the

highlighted bookmark in the Go to field at the bottom of the display.

Bookmarks are indicated by the following icons:

Options in Bookmarks (when a bookmark or folder is selected) are Open,Download,

Back to page,Bookmark manager,Mark/Unmark,Navigation options,Advanced

options,Send,Find bookmark,Details,Settings,Help, and Exit.

The starting page defined for the browser access point. If you use

another browser access point for browsing, the starting page is

changed accordingly.

The last visited page. When the phone is disconnected from the service,

the address of the last visited page is kept in memory until a new page

is visited during the next connection.

A bookmark showing the title.

An automatic bookmark. See "Bookmarks added automatically" on

page 106.

FCC DRAFT

PRELIMINARY

Add bookmarks manually

1In Bookmarks, select Options > Bookmark manager > Add bookmark.

2Start to fill in the fields.

Only the address must be defined. The default access point is assigned to the

bookmark if no other one is selected. Press the *key to enter special characters

such as /,.,:, and @. Press the Clear key to clear characters.

3Select Options > Save to save the bookmark.

Bookmarks added automatically

When you visit a web page, your browser automatically saves a bookmark in the

automatic bookmarks folder ( ), which is located in the list of bookmarks when

you open the Web application. Automatic bookmarks can be renamed and deleted,

but they cannot be moved. To modify automatic bookmarks settings, select

Options > Settings > Automatic bookmarks > On,Hide Folder, or Off.

•BROWSE

On a browser page, new links appear underlined in blue and previously visited links

in purple. Images that act as links have a blue border around them.

Options when browsing are Open,Open Wallet,Service options,Bookmarks,Save

as bookmark,Navigation options,Advanced options,Send bookmark,Find,Details,

Settings,Help, and Exit.

Keys and commands used in browsing

•To open a link, press the middle of the scroll key.

•To scroll the view, use the scroll key.

•To enter letters and numbers in a field, press the 0–9 keys. Press the *key to

enter special characters such as /,.,:, and @. Press the Clear key to clear

characters.

•To go to the previous page while browsing, press Back. If Back is not available,

select Options > Navigation options > History to view a chronological list of

the pages you have visited during a browsing session. The history list is cleared

each time a session is closed.

•To check boxes and make selections, press the middle of the scroll key.

•To retrieve the latest content from the server, select Options > Navigation

options > Reload.

•To open a sublist of commands or actions for the currently open browser page,

Web (mobile browser)

FCC DRAFT

PRELIMINARY

select Options > Service options.

•To disconnect from a browser service and to quit browsing, select Options >

Advanced options > Disconnect.

Save bookmarks

•To save a bookmark while browsing, select Options > Save as bookmark.

•To save a bookmark received in a smart message, select Menu > Messaging >

Inbox, open the message, and select Options > Save to bookmarks. See

"Smart messages" on page 54.

View saved pages

Options in Saved pages are Open,Back to page,Reload,Saved pages mngr.,Mark/

Unmark,Navigation options,Advanced options,Details,Settings,Help, and Exit.

If you regularly browse pages containing

information that does not change very often, you

can save and then browse them when not logged in.

To save a page, while browsing select Options >

Advanced options > Save page.

To open saved pages, scroll right in the Bookmarks

view. In the Saved pages view, press the middle of

the scroll key to open a saved page.

Saved pages are indicated by the icon. In the

Saved pages view you can also create folders to

store your saved browser pages. Folders containing

saved browser pages are indicated by the icon.

To start a connection to the browser service and to retrieve the page again, select

Options > Navigation options > Reload. The phone stays online after you reload

the page.

•DOWNLOAD

You can download items such as ringing tones, images, operator logos, software,

and video clips through the mobile browser. These items may be provided free, or

you can purchase them. To clear the cache after downloads, see “Clear the cache”

on page 109.

Once downloaded, items are handled by the respective applications on your phone

(for example, a downloaded photo will be saved in Gallery).

Important: Only install applications from sources that offer adequate

protection against harmful software.

FCC DRAFT

PRELIMINARY

Purchase an item

To download an item:

1Scroll to the link and select Options > Open.

2Choose the appropriate option to purchase the item, for example, Buy.

Carefully read all the information provided.

If the online content is compatible, you can use your wallet information to make

the purchase:

1Select Open wallet.

2Enter your wallet code. See "Enter the wallet code" on page 90.

3Select the appropriate card category from your wallet.

4Select Fill in.

This uploads the selected wallet information.

If the wallet does not contain all information necessary for the purchase, you will

be requested to enter the remaining details manually.

The information or services you have accessed is stored in the cache. To empty the

cache, see “Clear the cache” on page 109.

from being copied, modified, transferred, or forwarded.

Check an item before

downloading

You can see details about an item before you

download it. Details about an item may include the

price, a brief description, and size.

1Scroll to the link and select Options > Open.

Details about the item are displayed on your

phone.

2If you want to continue with the downloading,

press Accept, or if you want to cancel the

download, press Cancel.

•END A CONNECTION

Select Options > Advanced options > Disconnect, or press and hold the End key

to quit browsing and return to the standby mode.

Web (mobile browser)

FCC DRAFT

PRELIMINARY

•CLEAR THE CACHE

The information or services you have accessed are stored in the cache memory of

the phone. A cache is a memory location that is used to store data temporarily. If

you have tried to access or have accessed confidential information requiring

passwords, empty the cache after each use. The information or services you have

accessed are stored in the cache. To empty the cache, select Options > Navigation

options > Clear cache.

•BROWSER SETTINGS

From the Bookmarks screen, select Options > Settings and one of the following:

Default access point—To change the default access point, press the middle of the

scroll key to open a list of available access points. The current default access point

is highlighted. See "Connection" on page 65.

Show images—Choose if you want to view pictures when you are browsing. If you

choose No, you can later load images during browsing by selecting Options >

Show images.

Font size—You can choose 5 text sizes in the browser: Largest,Large,Normal,

Small, and Smallest.

Default encoding—Choose a language setting to make sure your browser pages

display text characters correctly.

Automatic bookmarks—Select On,Hide Folder, or Off. When you select Hide

Folder, bookmarks are still automatically added to the Automatic bookmarks

folder. See "Bookmarks added automatically" on page 106.

Screen size—Select Normal screen, Select. keys only, or Full screen to change how

the browser window is displayed in your phone screen.

Rendering—Select By quality or By speed to determine how web pages are loaded.

Cookies—Select Allow or Reject. You can enable or disable the receiving and

sending of cookies (a means of content providers to identify users and their

preferences for frequently used content).

Security warnings—Choose to Hide or Show security warnings.

Confirm touch tones—Select Always or First sending only. Choose whether you

want to confirm before the phone sends DTMF tones during a voice call. For

example, you can make a voice call while you are viewing a browser page, send

DTMF tones while a voice call is in progress, and save a name and phone number

in Contacts from a browser page. See "Options during a call" on page 20.

FCC DRAFT

PRELIMINARY

Wallet—Choose On if you want the wallet to open automatically when a

compatible browser page is opened.

Connectivity

FCC DRAFT

PRELIMINARY

14 Connectivity

•BLUETOOTH CONNECTION

Select Menu > Connect. > Bluetooth.

There may be restrictions on using Bluetooth devices in some locations. Check with

your local authorities or service provider.

Bluetooth technology enables wireless connections

between electronic devices within a maximum range

of 30 feet (10 meters). A Bluetooth connection can be

used to send images, videos, texts, business cards, and

calendar notes, or it can be used to connect wirelessly

to compatible devices supporting the same Bluetooth

protocols, such as computers.

Since devices using Bluetooth technology

communicate using radio waves, your phone and the

other devices do not need to be in direct line-of-sight.

The two devices only need to be within a maximum of

30 feet (10 meters) of each other, although the

connection can be subject to interference from

obstructions such as walls or from other electronic

devices. Features using Bluetooth technology, or allowing such features to run in

the background while using other features, increase the demand on battery power

and reduces the battery life.

When you activate a Bluetooth connection for the first time, you are asked to give

a name to your phone.

Bluetooth device compatibility

This phone is designed to be compliant with and to adopt Bluetooth

Specification 1.1. However, interoperability between the phone and other products

with Bluetooth wireless technology depends also on the profiles and protocols

used. To ensure interoperability between other devices supporting Bluetooth

technology, use Nokia approved enhancements for this phone. Check with the

manufacturers of other devices to determine their compatibility with this device.

The Nokia 7610 phone supports the following profiles:

•Dial-up networking profile (DUN) as a gateway

•Fax profile (FAX) as a gateway

•Object push profile (OPP) as a client and server

FCC DRAFT

PRELIMINARY

•File transfer profile (FTP) as a server

•Hands-free profile (HFP) as an audio gateway

•Generic object exchange profile (GOEP)

•Generic access profile (GAP)

•Serial port profile (SPP) with the PC connectivity software

For more information on the compatibility between Bluetooth devices, consult

their manufacturers.

Bluetooth connection settings

•Bluetooth—Select On if you want to use a Bluetooth connection. If you select

Off, all active Bluetooth connections are ended, and Bluetooth connection

cannot be used for sending or receiving data.

•My phone's visibility—If you select Shown to all, your phone can be found by

other devices during device search. If you select Hidden, your phone cannot

be found by other devices.

•My phone’s name—Define a name for your phone.

After you have set your Bluetooth connection as active and changed My phone's

visibility to All, your phone and this name can be seen by other devices.

Send data by Bluetooth connection

Your phone can only have one active Bluetooth connection at a time.

1Open an application where the item you wish to send is stored.

For example, to send a photo to another device,

open the Gallery application.

2Scroll to the item you want to send, and select

Options > Send > Via Bluetooth.

The phone starts to search for devices within

range. Devices using Bluetooth technology that

are within range start to appear on the display

one by one. You can see a device icon, the

device name, the device type, or a short name.

Paired devices are shown with . A paired

device is one where a Bluetooth connection

already exists between your phone and the

other device.

To interrupt the search, press Stop. The device list freezes and you can start to

form a connection to one of the devices already found.

Connectivity

FCC DRAFT

PRELIMINARY

When searching for devices, some devices may show only the unique device

addresses. To find out the unique address of your phone, enter the code

*#2820# in the standby mode.

If you have searched for devices earlier, a list of the devices that were found

previously is shown first. To start a new search, select More devices. If you

switch off the phone, the list of devices is cleared and the device search needs

to be started again before sending data.

3Scroll to the device with which you want to connect and press Select.

The item you are sending is copied to Outbox and the note Connecting is

shown.

4Pairing (if not required by the other device, go to step 5.)

•If the other device requires pairing before data can be transmitted, a tone

sounds and you are asked to enter a passcode.

•Create your own passcode (1–16 characters long, numeric) and agree

with the owner of the other device to use the same code. This passcode is

used only once and you do not have to memorize it. Devices that do not

have a user interface have a preset passcode. See "Paired devices view"

on page 114.

•After pairing, the device is saved to the Paired devices view.

5When the connection has been successfully established, Sending data is

shown.

from being copied, modified, transferred, or forwarded.

Data received by Bluetooth connection can be found in the Inbox folder in

Messaging. See "Inbox—receive messages" on page 53.

Icons for different devices are —Computer, —Phone, —Audio/video, and

—Bluetooth device

If sending fails, the message or data will be deleted. The Drafts folder in Messaging

does not store messages sent by Bluetooth connection.

Check Bluetooth connection status

When is shown in the standby mode, Bluetooth connection is active.

When is blinking, your phone is trying to connect to the other device.

When is shown continuously, the Bluetooth connection is active.

FCC DRAFT

PRELIMINARY

Paired devices view

Pairing with a device makes device searches easier and quicker. Paired devices are

easier to recognize; they are indicated by in the search result list. In the

Bluetooth connection main view, scroll right to open a list of paired

devices ( ).

•To pair with a device, select Options > New paired device. The phone starts a

device search. Scroll to the device with which you want to pair and press

Select. After you exchange passcodes, the device is added to the paired

devices list.

•To cancel pairing, scroll to the device whose pairing you want to cancel and

press the Clear key or select Options > Delete. If you want to cancel all

pairings, select Options > Delete all.

Note: If you are currently connected to a device and you delete the pairing

with that device, the pairing is removed and the device connection is

terminated, but the Bluetooth connection remains active on your phone.

•To set a device to be authorized or unauthorized, scroll to the device, select

Options, and then select one of the following:

Set as authorized—Connections between your phone and this device can be

made without your knowledge. No separate acceptance or authorization is

needed. Use this status for your own devices, for example, your PC, or devices

that belong to someone you trust. The icon is added next to authorized

devices in the Paired devices view.

Set as unauthorized—Connection requests from this device need to be

accepted separately every time.

Receive data by Bluetooth connection

When you receive data by Bluetooth connection, a tone is played, and you are

asked if you want to accept the message. If you accept, the item is placed in the

Inbox folder in Messaging. Messages received by Bluetooth connection are

indicated by . See "Inbox—receive messages" on page 53.

Close the Bluetooth connection

A Bluetooth connection is disconnected automatically after sending or receiving

data.

Connectivity

FCC DRAFT

PRELIMINARY

•USB CONNECTION

You can use the Connectivity Cable DKU-2 to connect your Nokia 7610 phone to

the USB port on your computer. Before using the connectivity cable, you must

install the cable driver prior to PC Suite installation. Carefully follow the

installation instructions given in the User Guide for Nokia PC Suite 6.1 and the User

Guide for Installing DKU-2 (USB) Drivers on the CD-ROM supplied with the phone.

Making or answering phone calls during a computer connection is not

recommended because it might disrupt the operation.

•CONNECTION MANAGER

Select Menu > Connect. > Conn. mgr.

In Connection manager you can identify the status

of multiple data connections, view details on the

amount of data sent and received, and end unused

connections.

You can view details of data connections only. Voice

calls are not listed.

When you open Connection manager, you can see

the following:

•Open data connections:

Data call

GPRS

•The status of each connection

•Amount of data uploaded and downloaded for each connection (GPRS

connections only)

•The duration of each connection (data call connections only)

Note: The actual time invoiced by your service provider may vary,

depending on network features, rounding off for billing, and so forth.

Options in Connection manager when there are one or more connections are

Details,Disconnect,Disconnect all,Help, and Exit.

View connection details

To view the details of a connection, scroll to a connection and select Options >

Details. The following information is displayed:

Name—The name of the Internet access point (IAP) in use

FCC DRAFT

PRELIMINARY

Bearer—The type of data connection: Data call or GPRS

Status—The current status of the connection

Received—The amount of data, in bytes, received to the phone

Sent—The amount of data, in bytes, sent from the phone

Duration—The length of time that the connection has been open

Speed—The current speed of both sending and receiving data in kB/s

Dial-up (GSM) or Name (GPRS)—The GSM dial-up number used or the name of the

GPRS access point used

Shared—The number of applications using the same connection. This option is not

displayed if the connection is not shared.

End connections

Scroll to a connection and select Options > Disconnect to end that connection

only, or select Options > Disconnect all to close all currently open connections.

•CONNECT YOUR PHONE TO A COMPUTER

For further information on how to make a connection to a compatible computer by

USB or Bluetooth connection, and how to install PC Suite, see the User Guide for

Nokia PC Suite in the CD-ROM Install Software section. For further information on

how to use Nokia PC Suite, see the help function on PC Suite or visit the support

pages at www.nokia.com.

•USE THE CD-ROM

The CD-ROM should launch itself after you have inserted it into the CD-ROM drive

of your compatible PC. If not, proceed as follows:

1Click the Windows Start button and select Programs > Windows Explorer.

2On the CD-ROM drive, locate a file called Nokia7610.exe and double-click it.

The CD-ROM interface opens.

3Locate PC Suite in the Install Software section.

4Double-click the Nokia PC Suite file. The installation wizard will guide you

through the installation process.

•SYNCHRONIZATION

Select Menu > Connect. > Sync.

Connectivity

FCC DRAFT

PRELIMINARY

TheSync application enables you to synchronize your calendar, contacts, and notes

with various calendar, address book, and notes applications on a compatible

computer or on the Internet.

Remote synchronization takes place over a Web or Bluetooth connection that you

can initiate from your phone. Local synchronization takes place by a data cable

connection to your PC.

The synchronization application uses SyncML technology for synchronization. For

information on SyncML compatibility, contact the supplier of the calendar, address

book, or notes application with which you want to synchronize your phone data.

Create a new synchronization profile

Options in the Sync main view are Synchronize,New sync profile,Edit sync profile,

Delete,Help, and Exit.

1Select Options > New sync profile.

2Choose whether you want to use the default setting values or copy the values

from an existing profile to be used as the basis for the new profile.

3Define the following:

Sync profile name—Write a descriptive name for the profile.

Data bearer—Select Web or Bluetooth as your synchronization method.

Access point—Select the access point you want to use for the data

connection. This option is only available if you choose Web in the Data bearer

setting.

Host address—Contact your service provider or system administrator for the

correct values.

Port—Contact your service provider or system administrator for the correct

values. This option is only available if you choose Web in the Data bearer

setting.

User name—Your user ID for the synchronization server. Contact your service

provider or system administrator for your correct ID.

Password—Write your password. Contact your service provider or system

administrator for the correct value.

4Scroll right and select which applications you would like to synchronize:

Contacts—Select Yes if you want to synchronize your contacts.

Calendar—Select Yes if you want to synchronize your calendar.

Notes—Select Yes if you want to synchronize your notes.

When you select Yes to synchronize each of these applications, you must also

specify:

FCC DRAFT

PRELIMINARY

•Remote database—Enter the correct path to the server for the remote

address book (to sync with Contacts), the remote calendar (to sync with

Calendar), or the remote notes application (to sync with Notes).

•Synchronization type—Select Normal,To server only, or To phone only.

5Press Done to save the settings.

Synchronize data

In the Sync main view, you can see the different profiles, and what kind of data will

be synchronized: Calendar,Contacts,Notes, or all three.

1In the main view, scroll to a profile and select Options > Synchronize. The

status of the synchronization is shown at the bottom of the screen.

To cancel synchronization before it is finished, press Cancel.

You are notified when the synchronization has been completed.

2After synchronization is complete, press View log, or select Options > View

log to open a log file showing the synchronization status (Complete or

Incomplete) and how many calendar, contact, and notes entries have been

added, updated, deleted, or discarded (not synchronized) in the phone or on

the server.

Troubleshooting

FCC DRAFT

PRELIMINARY

15 Troubleshooting

•SIM CARD

A SIM (subscriber identity module) card is required for your Nokia GSM phone to

operate. The SIM card is supplied by your service provider and has your mobile

phone number and all subscriber account information programmed on it.

You can save contact information from your contacts list on the SIM card so that

when you use the SIM card in another GSM phone or terminal, your phone number

and contacts will be available to you on the SIM card rather than stored in phone

memory. Note that you can only save names and phone numbers on the SIM card.

The SIM card in the Nokia 7610 phone is located under the battery in the top left

corner. The SIM card must be inserted under the hood and the gold-colored

contacts on the card must make direct contact with the gold-colored contacts in

the card slot. See “Insert the SIM card” on page 7.

•MEMORY LOW

When one of the following notes is shown, the phone memory is low and you must

delete some data:

•Not enough memory to perform operation.

•Delete some data first.

•Memory low. Delete some data.

To view what kind of data you have and how much memory the different data

groups consume, select Menu > Tools > File mngr. > Options > Memory details.

You may want to delete the following items regularly to avoid memory getting low:

•Messages from the Inbox,Drafts, and Sent folders in Messaging.

•Retrieved e-mail messages from the phone memory.

•Saved browser pages.

•Images, video clips, and sound clips in Gallery.

If you want to delete contact information, calendar notes, call timers, call cost

timers, game scores, or any other data, go to the respective application to remove

the data.

If you are deleting multiple items and one of the low memory notes is shown again,

try deleting items one by one (starting from the smallest item).

FCC DRAFT

PRELIMINARY

•DIFFERENT WAYS TO STORE DATA

•Use Nokia PC Suite 6.1 to make a backup copy of all data to your computer.

See "Connect your phone to a computer" on page 116.

•Send images to your e-mail address and then save the images to your

computer.

•Send data by Bluetooth connection to a compatible device.

•Store data on a compatible memory card.

•PHONE DISPLAY

If missing, discolored, or bright dots appear on the screen when you turn on your

phone, this is a characteristic of this type of display. Some displays may contain

pixels or dots that remain on or off. This is normal, not a fault.

•BLUETOOTH CONNECTION

If you cannot end a Bluetooth connection, check to see if another device is pairing

with (connected to) your phone but not sending data. If so, you can disconnect it

by deactivating the Bluetooth link altogether. Select Menu > Connect. >

Bluetooth, and select Bluetooth > Off.

If you cannot find a device using Bluetooth technology, check the following:

•Both devices have activated their Bluetooth connections.

•The distance between the two devices is not over 30 feet (10 meters) or that

there are no walls or other obstructions between the devices.

•The other device is not in Hidden mode.

•Both devices are compatible.

•MULTIMEDIA MESSAGING

If the phone cannot receive a multimedia message because memory is full, check

the amount of memory in use (see “Memory low” on page 119).

If the notes Retrieving message or Trying to retrieve message again are shown

briefly, your phone is trying to retrieve a multimedia message from the multimedia

messaging center. To stop the notes from displaying, you need to end the data

connection because the phone is attempting to start the connection again and

again. Also, try the following solutions:

Troubleshooting

FCC DRAFT

PRELIMINARY

Check that the settings for multimedia messaging have been defined correctly and

that there are no mistakes in phone numbers or addresses. Select Menu >

Messaging > Options > Settings > Multimedia message.

To stop the phone from making a data connection, you have the following options.

Select Menu > Messaging > Options > Settings > Multimedia message, and

then:

•Select On receiving msg. > Defer retrieval if you want the multimedia

messaging center to save the message to be retrieved later, for example, after

you have checked the settings. After this change, the phone still needs to send

information notes to the network. When you want to retrieve the message,

select Retr. immediately.

•Select On receiving msg. > Reject message if you want to reject all incoming

multimedia messages. After this change, the phone needs to send information

notes to the network and the multimedia messaging center will delete all

multimedia messages that are waiting to be sent to you.

•Select Multimedia reception > Off if you want to ignore all incoming

multimedia messages. After this change the phone will not make any network

connections related to multimedia messaging.

•MESSAGING

If you are composing a message and you cannot select a contact from the contacts

directory, the contact card does not have a phone number or an e-mail address.

Add the missing information to the contact card in Contacts.

•BROWSER SERVICES

If you receive the message No valid access point defined. Define one in Web

settings, you need to insert the proper browser settings. Contact your service

provider for instructions.

•LOG

If the log appear empty, you may have activated a filter, and no communication

events fitting that filter have been logged. To see all events in Logs, select

Options > Filter > All communication.

FCC DRAFT

PRELIMINARY

•PC CONNECTIVITY

If you have problems connecting the phone to a PC, make sure that Nokia PC

Suite 6.1 is installed and running on the PC. See the Quick Guide for Nokia PC Suite

6.1, which is located in the ‘Install Software’ section on the CD-ROM provided with

the phone. For further information on how to use PC Suite, see the help function

of PC Suite, or visit the support pages at www.nokia.com.

•APPLICATION NOT RESPONDING

If you need to close an application that is not responding, open the application

switching window by pressing and holding the Menu key. Then scroll to the

application, and press the Clear key to close the application.

Reference information

FCC DRAFT

PRELIMINARY

16 Reference information

•BATTERY INFORMATION

Your device is powered by a rechargeable battery. The full performance of a new

battery is achieved only after two or three complete charge and discharge cycles.

The battery can be charged and discharged hundreds of times but it will eventually

wear out. When the talk and standby times are noticeably shorter than normal, buy

a new battery. Use only Nokia approved batteries, and recharge your battery only

with Nokia approved chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not

leave the battery connected to a charger. Overcharging may shorten its lifetime. If

left unused, a fully charged battery will lose its charge over time. Temperature

extremes can affect the ability of your battery to charge.

Use the battery only for its intended purpose. Never use any charger or battery that

is damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a

metallic object such as a coin, clip, or pen causes direct connection of the positive

(+) and negative (-) terminals of the battery. (These look like metal strips on the

battery.) This might happen, for example, when you carry a spare battery in your

pocket or purse. Short-circuiting the terminals may damage the battery or the

connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or

winter conditions, will reduce the capacity and lifetime of the battery. Always try

to keep the battery between 59°F and 77°F (15°C and 25°C). A device with a hot or

cold battery may not work temporarily, even when the battery is fully charged.

Battery performance is particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire! Dispose of batteries according to local

regulations. Please recycle when possible. Do not dispose as household waste.

•ENHANCEMENTS

A few practical rules about accessories and enhancements:

•Keep all accessories and enhancements out of the reach of small children.

•When you disconnect the power cord of any accessory or enhancement, grasp

and pull the plug, not the cord.

•Check regularly that enhancements installed in a vehicle are mounted and are

operating properly.

FCC DRAFT

PRELIMINARY

•Installation of any complex car enhancements must be made by qualified

personnel only.

•ENHANCEMENTS, BATTERIES,

AND CHARGERS

For availability of approved enhancements, check with

your dealer.

Battery

The 900 mAh, Li-Ion based BL-5C battery provides power

in a thin and light package. Variation in operation times

will occur depending on the charger used, the SIM card,

network and usage settings, usage style, and

environments. See "Nokia 7610 technical information" on

page 131.

This device is intended for use when supplied with power

from ACP-12.

See also “Insert the battery” on page 9 and “Charge the battery” on page 9.

Other compatible Nokia enhancements

Headset audio

•Wireless headsets (HDW-2 and

HS-3W)

•Wireless boom headset (HS-4W)

•Boom headset (HDB-4)

•Standard headset (HS-5)

•Retractable headset (HS-10)

•Phone adapter (HDA-10) (See “Phone

adapter HDA-10 accessibility

enhancement” on page 125.)

Power

•Charger (ACP-12)

•Retractable charger (AC-1)

Data

•Connectivity cable (DKU-2)

•RS-MMC (64 MB and 128 MB)

Car

•Wireless car kit (CK-1W)

•Advanced car kit (CK-7W)

•Mobile charger (LCH-12)

Imaging

•Nokia observation camera

•Image viewer (SU-5)

•Image album (PD-1)

•Camera flash (PD-2)

Messaging

•Digital pen (SU-1B)

Cover/carrying

•Xpress-on covers and style packs

•Wrist strap

Reference information

FCC DRAFT

PRELIMINARY

Phone adapter HDA-10 accessibility enhancement

The HDA-10 phone adapter is a

Nokia enhancement that

allows you to connect your

mobile phone to a

Telecommunications Device for

the Deaf (TTY/TDD) to make a

call in digital mode.

If you are using a phone

adapter, you must activate it

on your mobile phone by

selecting Menu > Settings >

Enhancement >

Enhancement in use > TTY.

In addition to the Nokia 7610 phone, you will need the following for TTY/TDD

communication:

•A TTY/TDD device that is cellular ready or cellular compatible

•A cable for connecting the TTY/TDD to your phone, usually supplied by the

manufacturer of the TTY/TDD device

•The phone adapter (HDA-10), which can be purchased separately as an

enhancement at www.nokia.com

For more information, see “Accessibility solutions” on page 6.

•CARE AND MAINTENANCE

Your device is a product of superior design and craftsmanship and should be

treated with care. The suggestions below will help you protect your warranty

coverage and enjoy your device for many years.

•Keep the device dry. Precipitation, humidity, and all types of liquids or moisture

can contain minerals that will corrode electronic circuits. If your device does

get wet, remove the battery and allow the device to dry completely before

replacing it.

•Do not use or store the device in dusty, dirty areas. Its moving parts and

electronic components can be damaged.

•Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

•Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic

18 in.

FCC DRAFT

PRELIMINARY

circuit boards.

•Do not attempt to open the device other than as instructed in this guide.

•Do not drop, knock, or shake the device. Rough handling can break internal

circuit boards and fine mechanics.

•Do not use harsh chemicals, cleaning solvents, or strong detergents to clean

the device.

•Do not paint the device. Paint can clog the moving parts and prevent proper

operation.

•Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity

sensor, and light sensor lenses).

•Use only the supplied or an approved replacement antenna. Unauthorized

antennas, modifications, or attachments could damage the device and may

violate regulations governing radio devices.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest

authorized service facility for service.

•ADDITIONAL SAFETY INFORMATION

Operating environment

Remember to follow any special regulations in force in any area and always switch

off your device when its use is prohibited or when it may cause interference or

danger. Use the device only in its normal operating positions. To maintain

compliance with radio frequency exposure guidelines only use accessories

approved by Nokia for use with this device. When the device is on and being worn

on the body, always use an approved carrying case.

Parts of the device are magnetic. Metallic materials may be attracted to the device,

and persons with a hearing aid should not hold the device to the ear with the

hearing aid. Always secure the device in its holder, because metallic materials may

be attracted by the earpiece. Do not place credit cards or other magnetic storage

media near the device, because information stored on them may be erased.

Medical devices

Operation of any radio transmitting equipment, including wireless phones, may

interfere with the functionality of inadequately protected medical devices. Consult

a physician or the manufacturer of the medical device to determine if they are

adequately shielded from external RF energy or if you have any questions. Switch

Reference information

FCC DRAFT

PRELIMINARY

off your phone in health care facilities when any regulations posted in these areas

instruct you to do so. Hospitals or health care facilities may be using equipment

that could be sensitive to external RF energy.

PACEMAKERS

Pacemaker manufacturers recommend that a minimum separation of 6 inches

(15.3 cm) be maintained between a wireless phone and a pacemaker to avoid

potential interference with the pacemaker. These recommendations are consistent

with the independent research by and recommendations of Wireless Technology

Research. To minimize the potential for interference, persons with pacemakers

should

•Always keep the device more than 6 inches (15.3 cm) from their pacemaker

when the device is switched on

•Not carry the device in a breast pocket

•Hold the device to the ear opposite the pacemaker

If you have any reason to suspect that interference is taking place, switch off your

device immediately.

HEARING AID

Some digital wireless devices may interfere with some hearing aids. If interference

occurs, consult your service provider.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic

systems in motor vehicles such as electronic fuel injection systems, electronic

antiskid (antilock) braking systems, electronic speed control systems, air bag

systems. For more information, check with the manufacturer or its representative

of your vehicle or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle.

Faulty installation or service may be dangerous and may invalidate any warranty

that may apply to the device. Check regularly that all wireless device equipment in

your vehicle is mounted and operating properly. Do not store or carry flammable

liquids, gases, or explosive materials in the same compartment as the device, its

parts, or enhancements. For vehicles equipped with an air bag, remember that an

air bags inflate with great force. Do not place objects, including installed or

portable wireless equipment in the area over the air bag or in the air bag

deployment area. If in-vehicle wireless equipment is improperly installed and the

air bag inflates, serious injury could result.

FCC DRAFT

PRELIMINARY

Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere

and obey all signs and instructions. Potentially explosive atmospheres include areas

where you would normally be advised to turn off your vehicle engine. Sparks in

such areas could cause an explosion or fire resulting in bodily injury or even death.

Switch off the device at refuelling points such as near gas pumps at service

stations. Observe restrictions on the use of radio equipment in fuel depots, storage,

and distribution areas, chemical plants or where blasting operations are in

progress. Areas with a potentially explosive atmosphere are often but not always

clearly marked. They include below deck on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas (such as propane or butane), and

areas where the air contains chemicals or particles such as grain, dust or metal

powders.

FCC regulations prohibit using your wireless device while in the air. The use of

wireless telephones in an aircraft may be dangerous to the operation of the

aircraft, disrupt the wireless telephone network, and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone

services to the offender, legal action, or both.

•EMERGENCY CALLS

Important:Wireless phones, including this phone, operate using radio

signals, wireless networks, landline networks, and user-programmed

functions. Because of this, connections in all conditions cannot be

guaranteed. You should never rely solely on any wireless phone for

essential communications like medical emergencies.

To make an emergency call:

1If the phone is not on, switch it on. Check for adequate signal strength. Some

networks may require that a valid SIM card is properly inserted in the phone.

2Press the End key as many times as needed to clear the display and ready the

phone for calls.

3Key in the official emergency number for your present location. Emergency

numbers vary by location.

4Press the Send key.

If certain features are in use, you may first need to turn those features off before

you can make an emergency call. Consult this guide or your service provider. When

making an emergency call, give all the necessary information as accurately as

possible. Your wireless phone may be the only means of communication at the

scene of an accident. Do not end the call until given permission to do so.

Reference information

FCC DRAFT

PRELIMINARY

•CERTIFICATION INFORMATION (SAR)

THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE

TO RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and

manufactured not to exceed the emission limits for exposure to radio frequency

(RF) energy set by the Federal Communications Commission of the U.S.

Government. These limits are part of comprehensive guidelines and establish

permitted levels of RF energy for the general population. The guidelines are based

on standards that were developed by independent scientific organizations through

periodic and thorough evaluation of scientific studies. The standards include a

substantial safety margin designed to assure the safety of all persons, regardless of

age and health.

The exposure standard for wireless mobile phones employs a unit of measurement

known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is

1.6W/kg.* Tests for SAR are conducted using standard operating positions accepted

by the FCC with the phone transmitting at its highest certified power level in all

tested frequency bands. Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while operating can be well below

the maximum value. This is because the phone is designed to operate at multiple

power levels so as to use only the power required to reach the network. In general,

the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and

certified to the FCC that it does not exceed the limit established by the

government-adopted requirement for safe exposure. The tests are performed in

positions and locations (for example, at the ear and worn on the body) as required

by the FCC for each model.

The highest SAR value for the Nokia 7610 model phone as reported to the FCC

when tested for use at the ear is 0.55 W/kg, and when worn on the body, as

described in this user guide, is 0.70 W/kg. The highest SAR value for the

Nokia 7610 b model phone as reported to the FCC when tested for use at the ear

is 0.90 W/kg, and when worn on the body, as described in this user guide, is

0.88 W/kg. (Body-worn measurements differ among phone models, depending

upon available enhancements and FCC requirements).

While there may be differences between the SAR levels of various phones and at

various positions, they all meet the government requirement. The FCC has granted

an Equipment Authorization for this model phone with all reported SAR levels

evaluated as in compliance with the FCC RF exposure guidelines. SAR information

on this model phone is on file with the FCC and can be found under the Display

FCC DRAFT

PRELIMINARY

Grant section of http://www.fcc.gov/oet/fccid after searching on

FCC ID QVVRH-51 for the Nokia 7610 phone or FCC ID QVVRH-52 for the Nokia

7610 b phone.

For body worn operation, this phone has been tested and meets the FCC RF

exposure guidelines for use with a carry case, belt clip, or holder that contains no

metal and that positions the handset a minimum of 7/8-inch (2.2 cm) from the

body. Use of other carry cases, belt clips, or holders may not ensure compliance

with FCC RF exposure guidelines. If you do not use a body-worn accessory and are

not holding the phone at the ear, position the handset a minimum of 7/8-inch

(2.2 cm) from your body when the phone is switched on.

*In the United States and Canada, the SAR limit for mobile phones used by the

public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard

incorporates a substantial margin of safety to give additional protection for the

public and to account for any variations in measurements. SAR values may vary

depending on national reporting requirements and the network band. For SAR

information in other regions please look under product information at

www.nokia.com.

Reference information

FCC DRAFT

PRELIMINARY

•NOKIA 7610 TECHNICAL INFORMATION

Weight 4.16 oz (118 g) with 900–mAh Li-Ion battery

Size Volume: 5.7 cubic inches (93.5 cc)

Length: 4.27 in (108.6 mm)

Width: 2.1 in (53.0 mm)

Thickness: 0.7 in (18.7 mm)

Frequency range 7610

GSM900 880–915 MHz (TX)

925–960 MHz (RX)

GSM1800 1710–1785 MHz (TX)

1805–1880 MHz (RX)

GSM1900 1850–1910 MHz (TX)

1930–1990 MHz (RX)

7610 b

GSM850 824–849 MHz (TX)

869–894 MHz (RX)

GSM1800 1710–1785 MHz (TX)

1805–1880 MHz (RX)

GSM1900 1850–1910 MHz (TX)

1930–1990 MHz (RX)

Transmitter

output power Up to 2 W

Battery voltage 3.7 V

Operating

temperature 14°F to + 131°F

(-10°C to +55°C)

aTalk time,

standby time

a. Battery talk and standby times are estimates only and depend on signal strength, network

conditions, features used, battery age and condition (including the effect of charging

habits), temperatures to which battery is exposed, use in digital mode, and many other

factors. Please note that the amount of time a phone is used for calls will affect its standby

time. Likewise, the amount of time that the phone is turned on and in the standby mode

will affect its talk time.

Talk time: up to 3 hours

Stand-by time: up to 10 days

Charging time with 900–mAh Li-Ion battery and the ACP-12 charger:

approximately 1.5 hours

FCC DRAFT

PRELIMINARY

FCC DRAFT

PRELIMINARY

• Nokia ONE-YEAR LIMITED WARRANTY

Nokia Inc. (“Nokia”) warrants that this cellular phone (“Product”) is free from

defects in material and workmanship that result in Product failure during normal

usage, according to the following terms and conditions:

1The limited warranty for the Product extends for ONE (1) year beginning on the

date of the purchase of the Product. This one year period is extended by each

whole day that the Product is out of your possession for repair under this

warranty.

2The limited warranty extends only to the original purchaser (“Consumer”) of the

Product and is not assignable or transferable to any subsequent purchaser/

end-user.

3The limited warranty extends only to Consumers who purchase the Product in

the United States of America.

4During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole

option, any defective parts, or any parts that will not properly operate for their

intended use with new or refurbished replacement items if such repair or

replacement is needed because

of product malfunction or failure during normal usage. No charge

will be made to the Consumer for any such parts. Nokia will also

pay for the labor charges incurred by Nokia in repairing or replacing the

defective parts. The limited warranty does not cover defects in appearance,

cosmetic, decorative or structural items, including framing, and any non-

operative parts. Nokia’s limit of liability under the limited warranty shall be

the actual cash value of the Product at the time the Consumer returns the

Product for repair, determined by the price paid by the Consumer for the

Product less a reasonable amount for usage. Nokia shall not be liable for any

other losses or damages. These remedies are the Consumer’s exclusive

remedies for breach of warranty.

5Upon request from Nokia, the Consumer must prove the date of the original

purchase of the Product by a dated bill of sale or dated itemized receipt.

6The Consumer shall bear the cost of shipping the Product to Nokia in

Melbourne, Florida. Nokia shall bear the cost of shipping the Product back to

the Consumer after the completion of service under this limited warranty.

7The Consumer shall have no coverage or benefits under this limited warranty

if any of the following conditions are applicable:

a) The Product has been subjected to abnormal use, abnormal conditions,

improper storage, exposure to moisture or dampness, unauthorized

modifications, unauthorized connections, unauthorized repair, misuse,

neglect, abuse, accident, alteration, improper installation, or other acts

which are not the fault of Nokia, including damage caused by shipping.

b) The Product has been damaged from external causes such as collision

FCC DRAFT

PRELIMINARY

with an object, or from fire, flooding, sand, dirt, windstorm, lightning,

earthquake or damage from exposure to weather conditions, an Act of

God, or battery leakage, theft, blown fuse, or improper use of any

electrical source, damage caused by computer or internet viruses, bugs,

worms, Trojan Horses, cancelbots or damage caused by the connection to

other products not recommended for interconnection by Nokia.

c) Nokia was not advised in writing by the Consumer of the alleged defect

or malfunction of the Product within fourteen (14) days after the

expiration of the applicable limited warranty period.

d) The Product serial number plate or the enhancement data code has been

removed, defaced or altered.

e) The defect or damage was caused by the defective function of the cellular

system or by inadequate signal reception by the external antenna, or

viruses or other software problems introduced into the Product.

8Nokia does not warrant uninterrupted or error-free operation of the Product.

If a problem develops during the limited warranty period, the Consumer shall

take the following step-by-step procedure:

a) The Consumer shall return the Product to the place of purchase for repair

or replacement processing.

b) If “a” is not convenient because of distance (more than 50 miles) or for

other good cause, the Consumer shall ship the Product prepaid and

insured to:

Nokia Inc., Attn: Repair Department

795 West Nasa Blvd.

Melbourne, FL 32901

c) The Consumer shall include a return address, daytime phone number and/

or fax number, complete description of the problem, proof of purchase

and service agreement (if applicable). Expenses related to removing the

Product from an installation are not covered under this limited warranty.

d) The Consumer will be billed for any parts or labor charges not covered by

this limited warranty. The Consumer will be responsible for any expenses

related to reinstallation of the Product.

e) Nokia will repair the Product under the limited warranty within 30 days

after receipt of the Product. If Nokia cannot perform repairs covered

under this limited warranty within 30 days, or after a reasonable number

of attempts to repair the same defect, Nokia at its option, will provide a

replacement Product or refund the purchase price of the Product less a

reasonable amount for usage. In some states the Consumer may have the

right to a loaner if the repair of the Product takes more than ten (10) days.

Please contact the Customer Service Center at Nokia at the telephone

FCC DRAFT

PRELIMINARY

number listed at the end of this warranty if you need a loaner and the

repair of the Product has taken or is estimated to take more than ten (10)

days.

f) If the Product is returned during the limited warranty period, but the

problem with the Product is not covered under the terms and conditions

of this limited warranty, the Consumer will be notified and given an

estimate of the charges the Consumer must pay to have the Product

repaired, with all shipping charges billed to the Consumer. If the estimate

is refused, the Product will be returned freight collect. If the Product is

returned after the expiration of the limited warranty period, Nokia’s

normal service policies shall apply and the Consumer will be responsible for

all shipping charges.

9You (the Consumer) understand that the product may consist of refurbished

equipment that contains used components, some of which have been

reprocessed. The used components comply with Product performance and

reliability specifications.

10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A

PARTICULAR PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE

FOREGOING LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING

LIMITED WARRANTY IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND

IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL

NOT BE LIABLE FOR SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL

DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS

OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE

DAMAGES, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT,

COST OF CAPITAL, COST OF ANY SUBSTITUTE EQUIPMENT OR FACILITIES,

DOWNTIME, THE CLAIMS OF ANY THIRD PARTIES, INCLUDING CUSTOMERS,

AND INJURY TO PROPERTY, RESULTING FROM THE PURCHASE OR USE OF THE

PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF

CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY OTHER LEGAL OR EQUITABLE

THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD OF SUCH DAMAGES.

NOKIA SHALL NOT BE LIABLE FOR DELAY IN RENDERING SERVICE UNDER THE

LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD THAT THE

PRODUCT IS BEING REPAIRED.

FCC DRAFT

PRELIMINARY

11 Some states do not allow limitation of how long an implied warranty lasts, so

the one year warranty limitation may not apply to you (the Consumer). Some

states do not allow the exclusion or limitation of incidental and consequential

damages, so certain of the above limitations or exclusions may not apply to

you (the Consumer). This limited warranty gives the Consumer specific legal

rights and the Consumer may also have other rights which vary from state to

state.

12 Nokia neither assumes nor authorizes any authorized service center or any

other person or entity to assume for it any other obligation or liability beyond

that which is expressly provided for in this limited warranty including the

provider or seller of any extended warranty or service agreement.

13 This is the entire warranty between Nokia and the Consumer, and supersedes

all prior and contemporaneous agreements or understandings, oral or written,

relating to the Product, and no representation, promise or condition not

contained herein shall modify these terms.

14 This limited warranty allocates the risk of failure of the Product between the

Consumer and Nokia. The allocation is recognized by

the Consumer and is reflected in the purchase price.

15 Any action or lawsuit for breach of warranty must be commenced within

eighteen (18) months following purchase of the Product.

16 Questions concerning this limited warranty may be directed to:

Nokia Inc.

Attn: Customer Service

7725 Woodland Center Blvd., Ste. 150

Tampa, FL 33614

Telephone: 1-888-NOKIA-2U (1-888-665-4228)

Facsimile: (813) 287-6612

TTY/TDD Users Only: 1-800-24-NOKIA (1-800-246-6542)

[ 137 ]

Appendix A

Message from the CTIA

(Cellular Telecommunications

& Internet Association)

to all users of mobile phones.

Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC 20036.

Phone: (202) 785-0081

[ 138 ]

Safety is the most important call you will ever make.

A Guide to Safe and Responsible Wireless Phone Use

Tens of millions of people in the U.S. today take advantage of the unique

combination of convenience, safety and value delivered by the wireless telephone.

Quite simply, the wireless phone gives people the powerful ability to communicate

by voice--almost anywhere, anytime--with the boss, with a client, with the kids,

with emergency personnel or even with the police. Each year, Americans make

billions of calls from their wireless phones, and the numbers are rapidly growing.

But an important responsibility accompanies those benefits, one that every wireless

phone user must uphold. When driving a car, driving is your first responsibility. A

wireless phone can be an invaluable tool, but good judgment must be exercised at

all times while driving a motor vehicle--whether on the phone or not.

The basic lessons are ones we all learned as teenagers. Driving requires alertness,

caution and courtesy. It requires a heavy dose of basic common sense---keep your

head up, keep your eyes on the road, check your mirrors frequently and watch out

for other drivers. It requires obeying all traffic signs and signals and staying within

the speed limit. It means using seatbelts and requiring other passengers to do the

same.

But with wireless phone use, driving safely means a little more. This brochure is a

call to wireless phone users everywhere to make safety their first priority when

behind the wheel of a car. Wireless telecommunications is keeping us in touch,

simplifying our lives, protecting us in emergencies and providing opportunities to

help others in need.

When it comes to the use of wireless phones, safety is your most important call.

Wireless Phone "Safety Tips"

Below are safety tips to follow while driving and using a wireless phone which

should be easy to remember.

1 Get to know your wireless phone and its features such as speed dial and redial.

Carefully read your instruction manual and learn to take advantage of valuable

features most phones offer, including automatic redial and memory. Also, work

to memorize the phone keypad so you can use the speed dial function without

taking your attention off the road.

2 When available, use a hands free device. A number of hands free wireless phone

accessories are readily available today. Whether you choose an installed mounted

device for your wireless phone or a speaker phone accessory, take advantage of

these devices if available to you.

3 Position your wireless phone within easy reach. Make sure you place your

wireless phone within easy reach and where you can grab it without removing

your eyes from the road. If you get an incoming call at an inconvenient time, if

possible, let your voice mail answer it for you.

4 Suspend conversations during hazardous driving conditions or situations. Let

the person you are speaking with know you are driving; if necessary, suspend the

call in heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice

[ 139 ]

can be hazardous, but so is heavy traffic. As a driver, your first responsibility is

to pay attention to the road.

5 Do not take notes or look up phone numbers while driving. If you are reading an

address book or business card, or writing a "to do" list while driving a car, you

are not watching where you are going. It’s common sense. Don’t get caught in a

dangerous situation because you are reading or writing and not paying attention

to the road or nearby vehicles.

6 Dial sensibly and assess the traffic; if possible, place calls when you are not

moving or before pulling into traffic. Try to plan your calls before you begin your

trip or attempt to coincide your calls with times you may be stopped at a stop

sign, red light or otherwise stationary. But if you need to dial while driving,

follow this simple tip--dial only a few numbers, check the road and your mirrors,

then continue.

7 Do not engage in stressful or emotional conversations that may be distracting.

Stressful or emotional conversations and driving do not mix--they are

distracting and even dangerous when you are behind the wheel of a car. Make

people you are talking with aware you are driving and if necessary, suspend

conversations which have the potential to divert your attention from the road.

8 Use your wireless phone to call for help. Your wireless phone is one of the

greatest tools you can own to protect yourself and your family in dangerous

situations--with your phone at your side, help is only three numbers away. Dial

9-1-1 or other local emergency number in the case of fire, traffic accident, road

hazard or medical emergency. Remember, it is a free call on your wireless phone!

9 Use your wireless phone to help others in emergencies. Your wireless phone

provides you a perfect opportunity to be a "Good Samaritan" in your

community. If you see an auto accident, crime in progress or other serious

emergency where lives are in danger, call 9-1-1 or other local emergency number,

as you would want others to do for you.

10 Call roadside assistance or a special wireless non-emergency assistance number

when necessary. Certain situations you encounter while driving may require

attention, but are not urgent enough to merit a call for emergency services. But

you still can use your wireless phone to lend a hand. If you see a broken-down

vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident

where no one appears injured or a vehicle you know to be stolen, call roadside

assistance or other special non-emergency wireless number.

Careless, distracted individuals and people driving irresponsibly represent a hazard

to everyone on the road. Since 1984, the Cellular Telecommunications Industry

Association and the wireless industry have conducted educational outreach to

inform wireless phone users of their responsibilities as safe drivers and good

citizens. As we approach a new century, more and more of us will take advantage of

the benefits of wireless telephones. And, as we take to the roads, we all have a

responsibility to drive safely.

The wireless industry reminds you to use your phone safely when driving.

For more information, please call 1-888-901-SAFE.

For updates: http://www.wow-com.com/consumer/issues/driving/

articles.cfm?ID=85

[ 140 ]

FCC DRAFT

PRELIMINARY

Appendix B

Message from the FDA

(U.S. Food and Drug

Administration) to all users of

mobile phones.

July 18, 2001........For updates: http://www.fda.gov/cdrh/phones

FCC DRAFT

PRELIMINARY

Consumer Update on Wireless Phones U.S. Food and Drug Administration

1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are

associated with using wireless phones. There is no proof, however, that wireless

phones are absolutely safe. Wireless phones emit low levels of radiofrequency

energy (RF) in the microwave range while being used. They also emit very low levels

of RF when in the stand-by mode. Whereas high levels of RF can produce health

effects (by heating tissue), exposure to low level RF that does not produce heating

effects causes no known adverse health effects. Many studies of low level RF

exposures have not found any biological effects. Some studies have suggested that

some biological effects may occur, but such findings have not been confirmed by

additional research. In some cases, other researchers have had difficulty in

reproducing those studies, or in determining the reasons for inconsistent results.

2. What is FDA's role concerning the safety of wireless phones?

Under the law, FDA does not review the safety of radiation-emitting consumer

products such as wireless phones before they can be sold, as it does with new drugs

or medical devices. However, the agency has authority to take action if wireless

phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to

the user. In such a case, FDA could require the manufacturers of wireless phones to

notify users of the health hazard and to repair, replace or recall the phones so that

the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions, FDA has

urged the wireless phone industry to take a number of steps, including the

following:

•Support needed research into possible biological effects of RF of the type

emitted by wireless phones;

•Design wireless phones in a way that minimizes any RF exposure to the user

that is not necessary for device function; and

•Cooperate in providing users of wireless phones with the best possible

information on possible effects of wireless phone use on human health.

FDA belongs to an interagency working group of the federal agencies that have

responsibility for different aspects of RF safety to ensure coordinated efforts at the

federal level. The following agencies belong to this working group:

•National Institute for Occupational Safety and Health

•Environmental Protection Agency

•Federal Communications Commission

•Occupational Safety and Health Administration

•National Telecommunications and Information Administration

The National Institutes of Health participates in some interagency working group

activities, as well.

FDA shares regulatory responsibilities for wireless phones with the Federal

Communications Commission (FCC). All phones that are sold in the United States

must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA

FCC DRAFT

PRELIMINARY

and other health agencies for safety questions about wireless phones. FCC also

regulates the base stations that the wireless phone networks rely upon. While these

base stations operate at higher power than do the wireless phones themselves, the

RF exposures that people get from these base stations are typically thousands of

times lower than those they can get from wireless phones. Base stations are thus not

the subject of the safety questions discussed in this document.

3. What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held wireless phones with built-in

antennas, often called cell mobile or PCS phones. These types of wireless phones

can expose the user to measurable radiofrequency energy (RF) because of the short

distance between the phone and the user’s head. These RF exposures are limited by

Federal Communications Commission safety guidelines that were developed with

the advice of FDA and other federal health and safety agencies. When the phone is

located at greater distances from the user, the exposure to RF is drastically lower

because a person's RF exposure decreases rapidly with increasing distance from the

source. The so-called cordless phones; which have a base unit connected to the

telephone wiring in a house, typically operate at far lower power levels, and thus

produce RF exposures far below the FCC safety limits.

4. What are the results of the research done already?

The research done thus far has produced conflicting results, and many studies have

suffered from flaws in their research methods. Animal experiments investigating the

effects of radiofrequency energy (RF) exposures characteristic of wireless phones

have yielded conflicting results that often cannot be repeated in other laboratories.

A few animal studies, however, have suggested that low levels of RF could accelerate

the development of cancer in laboratory animals. However, many of the studies that

showed increased tumor development used animals that had been genetically

engineered or treated with cancer-causing chemicals so as to be pre-disposed to

develop cancer in the absence of RF exposure. Other studies exposed the animals to

RF for up to 22 hours per day. These conditions are not similar to the conditions

under which people use wireless phones, so we don’t know with certainty what the

results of such studies mean for human health.

Three large epidemiology studies have been published since December 2000.

Between them, the studies investigated any possible association between the use of

wireless phones and primary brain cancer, glioma, meningioma, or acoustic

neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None

of the studies demonstrated the existence of any harmful health effects from

wireless phone RF exposures. However, none of the studies can answer questions

about long-term exposures, since the average period of phone use in these studies

was around three years.

5. What research is needed to decide whether RF exposure from wireless phones

poses a health risk?

A combination of laboratory studies and epidemiological studies of people actually

using wireless phones would provide some of the data that are needed. Lifetime

animal exposure studies could be completed in a few years. However, very large

numbers of animals would be needed to provide reliable proof of a cancer

promoting effect if one exists. Epidemiological studies can provide data that is

directly applicable to human populations, but 10 or more years follow-up may be

FCC DRAFT

PRELIMINARY

needed to provide answers about some health effects, such as cancer. This is because

the interval between the time of exposure to a cancer-causing agent and the time

tumors develop - if they do - may be many, many years. The interpretation of

epidemiological studies is hampered by difficulties in measuring actual RF exposure

during day-to-day use of wireless phones. Many factors affect this measurement,

such as the angle at which the phone is held, or which model of phone is used.

6.What is FDA doing to find out more about the possible health effects of wireless

phone RF?

FDA is working with the U.S. National Toxicology Program and with groups of

investigators around the world to ensure that high priority animal studies are

conducted to address important questions about the effects of exposure to

radiofrequency energy (RF).

FDA has been a leading participant in the World Health Organization International

Electromagnetic Fields (EMF) Project since its inception in 1996. An influential

result of this work has been the development of a detailed agenda of research needs

that has driven the establishment of new research programs around the world. The

Project has also helped develop a series of public information documents on EMF

issues.

FDA and the Cellular Telecommunications & Internet Association (CTIA) have a

formal Cooperative Research and Development Agreement (CRADA) to do

research on wireless phone safety. FDA provides the scientific oversight, obtaining

input from experts in government, industry, and academic organizations. CTIA-

funded research is conducted through contracts to independent investigators. The

initial research will include both laboratory studies and studies of wireless phone

users. The CRADA will also include a broad assessment of additional research

needs in the context of the latest research developments around the world.

7. How can I find out how much radiofrequency energy exposure I can get by using

my wireless phone?

All phones sold in the United States must comply with Federal Communications

Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures.

FCC established these guidelines in consultation with FDA and the other federal

health and safety agencies. The FCC limit for RF exposure from wireless telephones

is set at a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The

FCC limit is consistent with the safety standards developed by the Institute of

Electrical and Electronic Engineering (IEEE) and the National Council on

Radiation Protection and Measurement. The exposure limit takes into

consideration the body’s ability to remove heat from the tissues that absorb energy

from the wireless phone and is set well below levels known to have effects.

Manufacturers of wireless phones must report the RF exposure level for each model

of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives

directions for locating the FCC identification number on your phone so you can find

your phone’s RF exposure level in the online listing.

8. What has FDA done to measure the radiofrequency energy coming from

wireless phones?

The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical

standard for measuring the radiofrequency energy (RF) exposure from wireless

FCC DRAFT

PRELIMINARY

phones and other wireless handsets with the participation and leadership of FDA

scientists and engineers. The standard, Recommended Practice for Determining the

Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless

Communications Devices: Experimental Techniques, sets forth the first consistent

test methodology for measuring the rate at which RF is deposited in the heads of

wireless phone users. The test method uses a tissue-simulating model of the human

head. Standardized SAR test methodology is expected to greatly improve the

consistency of measurements made at different laboratories on the same phone.

SAR is the measurement of the amount of energy absorbed in tissue, either by the

whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g)

of matter. This measurement is used to determine whether a wireless phone

complies with safety guidelines.

9. What steps can I take to reduce my exposure to radiofrequency energy from my

wireless phone?

If there is a risk from these products--and at this point we do not know that there

is--it is probably very small. But if you are concerned about avoiding even potential

risks, you can take a few simple steps to minimize your exposure to radiofrequency

energy (RF). Since time is a key factor in how much exposure a person receives,

reducing the amount of time spent using a wireless phone will reduce RF exposure.

If you must conduct extended conversations by wireless phone every day, you

could place more distance between your body and the source of the RF, since the

exposure level drops off dramatically with distance. For example, you could use a

headset and carry the wireless phone away from your body or use a wireless phone

connected to a remote antenna.

Again, the scientific data do not demonstrate that wireless phones are harmful. But

if you are concerned about the RF exposure from these products, you can use

measures like those described above to reduce your RF exposure from wireless

phone use.

10. What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones,

including children and teenagers. If you want to take steps to lower exposure to

radiofrequency energy (RF), the measures described above would apply to children

and teenagers using wireless phones. Reducing the time of wireless phone use and

increasing the distance between the user and the RF source will reduce RF

exposure.Some groups sponsored by other national governments have advised that

children be discouraged from using wireless phones at all. For example, the

government in the United Kingdom distributed leaflets containing such a

recommendation in December 2000. They noted that no evidence exists that using

a wireless phone causes brain tumors or other ill effects. Their recommendation to

limit wireless phone use by children was strictly precautionary; it was not based on

scientific evidence that any health hazard exists.

11. What about wireless phone interference with medical equipment?

Radiofrequency energy (RF) from wireless phones can interact with some electronic

devices. For this reason, FDA helped develop a detailed test method to measure

electromagnetic interference (EMI) of implanted cardiac pacemakers and

defibrillators from wireless telephones. This test method is now part of a standard

sponsored by the Association for the Advancement of Medical instrumentation

FCC DRAFT

PRELIMINARY

(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and

many other groups, was completed in late 2000. This standard will allow

manufacturers to ensure that cardiac pacemakers and defibrillators are safe from

wireless phone EMI. FDA has tested hearing aids for interference from handheld

wireless phones and helped develop a voluntary standard sponsored by the Institute

of Electrical and Electronic Engineers (IEEE). This standard specifies test methods

and performance requirements for hearing aids and wireless phones so that no

interference occurs when a person uses a compatible phone and a accompanied

hearing aid at the same time. This standard was approved by the IEEE in 2000.

FDA continues to monitor the use of wireless phones for possible interactions with

other medical devices. Should harmful interference be found to occur, FDA will

conduct testing to assess the interference and work to resolve the problem.

12. Where can I find additional information?

For additional information, please refer to the following resources:

•FDA web page on wireless phones

http://www.fda.gov/cdrh/phones/index.html

•Federal Communications Commission (FCC) RF Safety Program

http://www.fcc.gov/oet/rfsafety

•International Commission on Non-Ionizing Radiation Protection

http://www.icnirp.de

•World Health Organization (WHO) International EMF Project

http://www.who.int/emf

•National Radiological Protection Board (UK)

http://www.nrpb.org.uk/

July 18, 2001For updates: http://www.fda.gov/cdrh/phones

FCC DRAFT

PRELIMINARY

Index

Numerics

1-touch dialing

Assign numbers 27

Make calls 19

Access points 65

Accessibility solutions 6

Accessories, See Enhancements

Alarm

Clock 86

Tone 87

Turn off or snooze 87

Answer a call 20

Antenna 10

Application manager 74

Applications

Add voice commands to 77

Install applications 75

Java application settings 75

Remove files 76

Audio files, See Media files

Background image, See Themes

Battery

Charge 9

Insert 9

Talk time and standby time 124

Bluetooth connection 111

Close connection 114

Connection requests 113

Icons 113

Pairing 113

Receive data 114

Send data 112

Settings 112

Browser

Access points 66

Bookmarks 105

Browse 106

Connect 105

End connections 108

Icons 105

Service message settings 61

Service messages 54

WAP and XHTML pages 104

Cache, clear 109

Calculator 84

Calendar 33

Alarm tone 34

Delete many entries simultaneously

Settings 34

Call lists, See Log

Call register, See Log

Call restriction 72

Call timers 22

Calls

1-touch dialing 19

Answer 20

Conference calls 19

Dialed 22

Duration timers 22

Forwarding 20

International 18

FCC DRAFT

PRELIMINARY

Make a call 18

Missed 22

Options during a call 20

Recent 22

Reject 20

Settings 64

Settings for forwarding 21

Transfer 20

Use the Contacts directory 18

Camera 36

Memory consumption 37

Record videos 37

Self-timer 37

Settings 38

Take pictures 36

CD-ROM 116

Cell broadcast messages 57

Cell info display 73

Certificates (Certif.)

Management 71

Trust settings 72

Chargers 124

Clear memory

Calendar entries 34

Clock 86

Code

PIN, See PIN code

Security, See Security

Computer connections 116

Conference calls 19

Connection

Bluetooth 111

End 116

Indicators, See Icons

Manager 115

Settings 65

USB 115

View details 115

Contact cards

Assign 1-touch dialing 27

Assign default numbers and addresses

Create 25

Data import 35

Insert images 25

Remote synchronization 117

Ringing tones 26

Voice tags 26,27

Contact groups 28

Converter 84

Add exchange rates 85

Convert currencies 85

Convert units 85

Copy

SIM card to phone memory 26

Text 50

Customer care 5

Data import 35

Date, settings 69

Delivery reports 47

Dialed numbers 22

Display settings 64

Microsoft RH-51 GSM 900/1800/1900 Cellular Telephone w/Bluetooth User Manual 7610 FCCdraft2 04 08 2004 real

Microsoft Mobile Oy GSM 900/1800/1900 Cellular Telephone w/Bluetooth 7610 FCCdraft2 04 08 2004 real

Manual

Navigation menu

Namespaces

Views

Navigation