Microsoft RH-58 Single-Band PCS Phone User Manual 6011i FCCDraft

Microsoft Mobile Oy Single-Band PCS Phone 6011i FCCDraft

UserManual.wiki >

Microsoft >

RH 58 User Manual HTML Version

Manual

Nokia 6011i User Guide

931169X26

Issue 1

Part No. XXXXXXX, Issue No. 1

Nokia, Nokia Connecting People, Nokia 6011i, Xpress-on, Pop-Port, and the Nokia Original

Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company

and product names mentioned herein may be trademarks or trade names of their respective owners.

Printed in Canada 7/2004

Includes RSA BSAFE cryptographic or security protocol software from

RSA Security.

Java is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 6011i products. Nokia

operates a policy of ongoing development. Nokia reserves the right to make changes to any of the

products described in this document without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME

OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER

CAUSED.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE

LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,

ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT.

NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT

PRIOR NOTICE.

Export Controls

This device may contain commodities, technology or software subject to export laws and regulations

from the US and other countries. Diversion contrary to law is prohibited.

FCC/Industry Canada Notice

Your phone may cause TV or radio interference (for example, when using a telephone in close

proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your

telephone if such interference cannot be eliminated. If you require assistance, contact your local

service facility. This device complies with part 15 of the FCC rules. Operation is subject to the

condition that this device does not cause harmful interference.

Contents

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal. Read the

complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while

driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELING

Don’t use the phone at a refuelling point. Don’t use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don’t use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation.

Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect

incompatible products.

For your safety

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACKUP COPIES

Remember to make back-up copies or keep a written record of all important

information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety

instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the End key as many

times as needed to clear the display and return to the main screen. Enter the

emergency number, then press the Talk key. Give your location. Do not end

the call until given permission to do so.

Welcome

Congratulations on your purchase of the Nokia 6011i mobile phone. Your phone

provides many functions which are practical for daily use, such as a hands-free

loudspeaker, alarm clock, calculator, calendar, and more. Your phone can also connect

to a PC, laptop, or other device using a data cable. To personalize your phone, you can

set your favorite ring tones or select an Xpress-onTM color cover.

■About your device

The Nokia 6011i wireless phone described in this guide is approved for use on the CDMA

1900 network.

Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and legitimate

rights of others.

Warning: To use any features in this device, other than the alarm clock, the

phone must be switched on. Do not switch the device on when wireless phone

use may cause interference or danger.

■Network services

To use the phone you must have service from a wireless service provider. Many of the

features in this device depend on features in the wireless network to function. These

network services may not be available on all networks or you may have to make specific

arrangements with your service provider before you can utilize network services. Your

service provider may need to give you additional instructions for their use and explain

what charges will apply. Some networks may have limitations that affect how you can

use network services. For instance, some networks may not support all

language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, they will not appear in your device menu. Contact your

service provider for more information.

Welcome

■Shared memory

The following features in this device may share memory: contacts, text messages,

photos, images, and tones in gallery, calendar notes, games, and applications. Use of

one or more of these features may reduce the memory available for the remaining

features sharing memory. For example, saving many calendar notes, may use all of the

available memory. Your phone may display a message that the memory is full when you

try to use a shared memory feature. In this case, delete some of the information or

entries stored in the shared memory features before continuing. Some of the features,

such as photos, images, tones in gallery, text messages, and applications may have a

certain memory specially allotted to them in addition to the memory shared with other

features.

■Register your phone

Make sure to register your phone at www.warranty.nokiausa.com or call

1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you

should need to call a customer center or to have your phone repaired.

■Get help

Find your phone label

If you need help, Nokia Customer Care is available

for assistance. Before calling, we recommend that

you write down the following information and

have it available:

• Electronic serial number (ESN)

• Your zip code

The ESN is found on the type label, which is

located beneath the battery on the back of the phone. See Remove the back cover, 14

and Remove the battery, 14 for more information.

Contact Nokia

Please have your product with you when contacting either of the numbers below:

Nokia Customer Care Center, USA

Nokia Inc.

7725 Woodland Center Boulevard, Suite #150

Tampa, Florida 33614

Tel: 1-888-NOKIA-2U (1-888-665-4228)

Fax: 1-813-249-9619

TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)

Customer Care Center, Canada

Nokia Products Ltd.

601 Westney Road South

Ajax, Ontario L1S 4N7

Tel: 1-888-22-NOKIA (1-888-226-6542)

Fax: 1-905-427-1070

Updates

From time to time, Nokia updates this guide to reflect changes. The latest version may

be available at www.nokia.com. An interactive tutorial for this product may be

available at the web site www.nokiahowto.com.

Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals, including

those with disabilities. For more information visit the web site at

www.nokiaaccessibility.com.

Phone at a glance

1. Phone at a glance

■The start screen

The start screen is home base and indicates that your phone is in idle mode.

Signal strength (1)—A higher bar indicates a stronger network signal.

Battery level (2)—A higher bar indicates more charge in the battery.

Menu (3)—Press the Left selection key to select this option.

Contacts (4)—Press the Right selection key to select this option.

■Quick keys

At the start screen, the Four-way scroll key takes you to frequently accessed menus:

Scroll up key—Go to the contacts list.

Scroll right key—View the calendar.This key can be set to perform different functions

depending on your network service.

Scroll down key—Go to the contacts list.

Scroll left key—Quickly create a text message.

■Indicators and icons

Depending on your wireless service provider and the model number of your phone, some

or all of the following indicators and icons may appear on the start screen:

Icon Indicates...

You have new text or picture messages. See Text

messages, 30.

You have new voice messages. See Voice messages,

33.

Your phone keypad is locked. See Keyguard, 20.

Your phone is set to the silent profile. See Profiles

(Menu 3), 44.

Your phone is on vibrate mode. See Customize a

profile, 44.

The alarm clock is set to on. See Alarm clock, 73.

The countdown timer is running. See Countdown

timer, 78.

The stopwatch timer is running in the background.

See Stopwatch, 79.

Integrated hands-free is active. See Using the loud-

speaker, 19.

The timed profile is selected. See Profiles (Menu 3),

44.

or An enhancement is connected to the phone. See En-

hancement settings, 54.

or Voice privacy encryption is active (or is not active)

in the network. See Voice privacy, 59

or Location info sharing is set to Emergency or On. See

Location info sharing, 46.

Phone at a glance

■Get the most out of this guide

The following sections illustrate the various components of your phone. Familiarize

yourself with these sections to help you understand the instructions that follow.

This guide uses certain terms for the steps that you are asked to perform.

• Press means to press and release a key quickly. For example, press 7 means press the

key on the keypad that is labeled with the number 7 and the letters “pqrs”.

•Press and hold means to press and hold a key for 2–3 seconds; then release the key.

• Selection keys are used to select a menu option. To select an option, press the

selection key below the menu item on the phone screen.

• Scroll keys are used to move up, down, left, or right in the menus.

•Talk and End keys: Press the Talk key to place a call or to answer an incoming call.

Press the End key to end a call or press and hold to return to the idle screen.

■Phone menus

Phone features are grouped according to function and are accessed through the main

menus. Each main menu contains submenus and lists from which you can select or view

items and customize your phone features. You can access these menus and submenus

by using the scroll method or by using a shortcut.

Note: Some features may not be available, depending on your network. For

more information, contact your wireless provider.

You are in a digital network. See Network services,

You are in an analog network. See Network servic-

es, 6.

You are in a 1XRTT network. See Network services,

You are roaming outside your home network. See

Roaming options, 60.

Icon Indicates...

The scroll method

1. At the start screen, select Menu, and scroll up and down through the

main menus using the Four-way scroll key.

As you scroll through the menus, the menu number appears in the

upper right corner of the display. Below the number is a scroll bar

with a tab that moves up or down on the right side of the display screen as you scroll

through the menus, providing a visual representation of your current position in the

menu structure.

2. When you arrive at a menu, press Select (the Left selection key) to enter submenus.

• Press Back (the Right selection key) to return to the previous menu.

• Press the End key to return to the start screen from any menu or submenu.

Shortcuts

You can go directly to almost any menu or submenu, as well as activate most features

by using a shortcut.

At the start screen, select Menu; then within 3 seconds, press the key or keys associated

with the menu function you would like to view or activate.

For example, to select the Meeting profile, select Menu 3-3-1 from the start screen

(Menu > 3Profiles > 3Meeting > 1Select). After a brief pause, the Meeting profile is

activated.

In-phone help

Many features have brief descriptions (help text) which can be viewed on the display. To

view these descriptions, scroll to a feature, and wait for about 10 seconds. Press More to

view all of the description, or press Back to exit.

In order to view the descriptions, you must first activate help text.

At the start screen, select Menu > Settings > Phone settings > Help text activation > On

or Off.

Set up your phone

2. Set up your phone

■Antenna

Your phone has two antennas:

• The retractable antenna is active when fully

extended (1).

• The internal antenna is always active (2).

Your device has an internal antenna located

towards the top of the phone. Hold the phone as you would any other

telephone with the antenna area pointed up and over your shoulder.

Note: As with any other radio transmitting device, do

not touch the antenna unnecessarily when the device is

switched on. Contact with the antenna affects call

quality and may cause the phone to operate at a higher

power level than otherwise needed. Avoiding contact

with the antenna area when operating the phone

optimizes the antenna performance and the battery life.

■Battery

Always switch the device off, and disconnect the charger before removing the battery.

Remove the back cover

1. With the back of the phone facing you,

push down on the back cover release

button.

2. Slide the back cover toward the bottom of

the phone and remove.

Remove the battery

After you have removed the back cover, insert your

finger into the finger grip, and lift the battery from

its compartment.

Replace the battery

1. Position the battery so the positive and

negative indicators on the battery match up

with the positive and negative indicators on

the phone.

The battery label should be facing away from

the phone.

2. Insert the battery, gold-colored contact end first, into the battery slot.

3. Push down on the other end of the battery to snap the battery into place.

Replace the back cover

Slide the back cover toward the top of the

phone until the back cover is securely in place.

Charge the battery

1. Plug the charger into a standard ac outlet.

Set up your phone

2. Insert the charger output plug into the

round jack at the bottom end of the phone.

After a few seconds, the battery indicator in

the display starts to scroll from bottom to

top. If the battery is completely discharged,

it may take a few minutes before the

charging indicator appears on the display or

before any calls can be made.

■Turn your phone on or off

1. To turn your phone on or off, press and hold the

Power key on top of the phone for at least 3 seconds.

2. Enter the security code, or PIN code, if necessary, and

press OK.

■Connect the headset

A compatible headset, such as HS-5, may be purchased

with your phone or separately as an enhancement. (See

Enhancements, 84 for information.)

1. Plug the headset connector into the

Pop-Port™ connector at the bottom end

of your phone. The icon appears on

the start screen.

2. Position the headset on your ear.

With the headset connected, you can

make, answer, and end calls as usual.

• Use the keypad to enter numbers.

• Press the Talk key to place a call.

• Press the End key to end a call.

You can also plug a compatible headset, such as the HS-9 Universal Headset, into the

2.5mm headset jack on the side of your phone to allow hands-free operation. (See

Enhancements, 84 for information.)

■Change the Xpress-on™ covers

Note: Before removing the cover, always switch off the power, and disconnect

the charger and any other device. Avoid touching electronic components while

changing the covers. Always store and use the device with the covers attached.

Remove the back cover

With the back of the phone facing you, push

down on the back cover release button, and slide

the back cover toward the bottom of the phone.

Remove the battery

After you have removed the back cover, insert

your finger into the finger grip, and lift the

battery from its compartment.

Remove the front cover

Gently pull the bottom of the front cover away from

the rest of the phone.

Install the keymat and front cover

1. Remove the keymat from the old front cover.

Set up your phone

2. Place the keymat into the new front cover.

3. Press the front cover and keymat against the

phone, and snap the front cover into place.

Warning: Always replace the front cover

before replacing the battery and the back cover. Replacing the back cover first

may cause damage to your phone.

Replace the battery

1. Position the battery so the positive and

negative indicators on the battery match up

with the positive and negative indicators on

the phone.

The battery label should be facing away from

the phone.

2. Insert the battery, gold-colored contact end first, into the battery slot.

3. Push down on the other end of the battery to snap the battery into place.

Replace the back cover

1. Verify that the front cover and battery have

already been replaced.

2. Slide the back cover toward the top of the

phone until the back cover is securely in

place.

■Make a call

Note: Before making or receiving a call, fully extend the retractable antenna.

Using the keypad

1. Enter the phone number (including the area code), and press the Talk key. (To delete

a character to the left of the cursor, press Clear.)

2. Press the End key to end the call, or End call to cancel the call attempt.

Using the contacts list

1. At the start screen, scroll up or down to the entry you wish to view.

2. Press the Talk key to make the call, or press Details to view details of the entry.

Using the last dialed number

1. At the start screen, press the Talk key to display the last 20 numbers dialed.

2. Scroll to the number (or name) you wish to redial, and press the Talk key.

Conference calling

Conference calling is a network service that allows you to take part in a conference call

with two other participants.

1. Make a call to the first participant.

2. With the first participant on the line, select Options > New call.

3. Enter the phone number of the second participant, or press Search to retrieve a

number from the contacts list.

4. Press Flash.

The first participant is put on hold.

5. When the second participant picks up, press the Talk key to connect the calls.

6. To end the conference call, press Options > End all calls, or press the End key.

Set up your phone

■Answer calls

Answer or silence an incoming call

1. Press the Talk key or Answer to answer the call.

2. Press the End key or Silence to mute the ringing tone; then press Answer to answer

the call, or do nothing, and the call is eventually diverted to voicemail.

Answer a call with the keypad locked

To answer a call with the keypad locked, simply press the Talk key. During the call, all

features function as normal. When you end or reject the call, the keypad automatically

relocks. See Keyguard, 20 for details.

When the keypad is locked, calls still may be possible to the official emergency number

programmed into your phone.

Adjust the earpiece volume

While in a call, scroll right or left to adjust the volume of the earpiece.

When adjusting the volume, a bar chart appears in the display indicating the volume

level.

Using the loudspeaker

You can use your phone as a loudspeaker during a call. Do not hold the phone to your

ear during the loudspeaker operation. While in a call:

• To activate the loudspeaker, press Loudsp.

• To deactivate the loudspeaker during a call, press Handset.

The loudspeaker is deactivated automatically when a call (or a call attempt) ends or

when certain enhancements are connected.

Options during a call

Many of the options that you can use during a call, are network services. Check with

your wireless service provider for more information.

1. Press Options during a call to display the following options:

Mute/Unmute—Silence your end of the call.

Loudspeaker/Handset—Activate or deactivate the loudspeaker while in a call.

New call—Initiate a conference call. See Conference calling, 18 for information.

Save—Save the number you dialed to your contacts list.

Add to name—Save the number you dialed to a contact already in the contacts list.

End all calls—Disconnect from all active calls.

Touch tones—Enter the numbers, and press Tones to send the numbers as tones.

Contacts—View the contacts list.

Menu—View the phone menu.

2. Scroll to an option, and press Select to activate the option or enter its submenu.

■Keyguard

With keyguard, you can lock the keypad to prevent keys from being pressed accidentally.

Remember to lock your phone keypad to prevent accidental calls. If the keypad is locked,

it unlocks when you receive a call. After the call, the lock automatically reactivates.

When the keyguard is on, calls still may be possible to the official emergency number

programmed into your phone. Key in the emergency number, and press the Talk key.

Lock the keypad

Select Menu; then press * within 2 seconds.

Unlock the keypad

Select Unlock; then press * within two seconds.

Text entry

3. Text entry

You can use two methods for entering text and numbers:

• Standard mode is the only way to enter text into the contacts list and to rename

caller groups.

• Predictive text input is a quick and easy method for writing messages or creating a

calendar note.

■Standard mode

Text (Abc)

•Press Clear to backspace the cursor and delete a character.

• Press and hold Clear to backspace continuously and delete characters.

• Press a key once to insert the first letter on the key, twice for the second letter, etc. If

you pause briefly, the last letter in the display is accepted, and your phone awaits

the next entry.

•Press 0 to enter a space, thereby accepting a completed word.

•Press 1 as many times as necessary to scroll through a list of commonly used

characters.

•Press * to display a complete list of special characters.

•Press # to switch predictive text on or off and to use predictive text in various

modes. As you press #, the following icons (not the descriptions) appear in the upper

left of the display screen:

Uppercase text: standard mode is on.

Lowercase text: standard mode is on.

Sentence case text: standard mode is on.

Numbers (123)

To switch to 123 mode from Abc mode, press and hold # at any message entry screen

until the icon in the upper left corner of the display switches from Abc to 123 (or vice

versa).

Punctuation and special characters

While at any text entry screen, press * to display special characters (press and hold * if

predictive text is on). Press * again to cycle through all available characters. You can

navigate through the list of special characters by using the Four-way scroll key. Once a

character is highlighted, press Insert to insert the character into your message.

■Predictive text input

Predictive text input allows you to write messages quickly using your keypad and the

built-in dictionary. It is much faster than the standard mode method, because for each

letter, you only press the corresponding key on your keypad once.

Activate/deactivate

At any text entry screen, press and hold Options. Predictive text is turned on and off,

depending on its previous mode.

1. At any text entry screen, select Options > Predictive text.

2. Scroll to the language of your choice, and press Select.

Text entry

The illustration below simulates your display each time a key is pressed. For example, to

write Nokia with predictive text on and with the English dictionary selected, press each

of the following keys once:

6 6 5 4 2

•Press 0 to enter a space, and begin writing the next word.

Text entry

• If a displayed word is not correct, press * to see other matches. To return to the

previous word in the list of matches, press Previous.

•If ? appears after a word, press Spell to add the word to the dictionary.

•Press 1 to insert a period into your message.

• Press and hold * to display special characters. Press * again to cycle through all

available characters.

•Press # to switch predictive text on or off and to use predictive text in various

modes. As you press # , the following icons (not the descriptions) appear in the

upper left of the display screen:

Sentence case text: predictive text is on.

Lowercase text: predictive text is on.

Uppercase text: predictive text is on.

4. Contacts list

The contacts list can hold up to 250 contacts with multiple numbers and text notes for

each contact. The amount of numbers and text entries that you can save may vary,

depending on length and the total number of entries in the contacts list.

■Add new contacts

Save a name and number

1. At the start screen, use the keypad to enter the phone number you wish to save.

2. Select Options > Save.

3. Enter the name, and press OK.

Save (only) a number

1. At the start screen, use the keypad to enter the phone number you wish to save.

2. Press and hold Options.

Save an entry

1. At the start screen, select Contacts > Add new.

2. Enter the name, and press OK.

3. Enter the phone number, and press OK > Done.

Save multiple numbers and text items

You can save different types of phone numbers and short text items per name to the

contacts list. The first number you save for any entry is automatically set as the default,

or primary number, but the primary number can always be changed.

1. At the start screen, scroll up or down to the entry to which you wish to add a phone

number or text item.

2. Select Details > Options > Add number or Add detail.

If you selected Add number, select General, Mobile, Home, Work, or Fax.

Contacts list

If you selected Add detail, select E-mail, Web address, Street addr., or Note.

3. Enter the number or text for the type you have selected, and press OK.

4. To change a number type (General, Mobile, Home, Work, or Fax), select Change type

in the options list.

You can also change which phone number is the default (primary) number for the

contact entry.

1. At the start screen, scroll down to select the number you wish to change, and press

Details.

2. Scroll to the number you wish to set as default, and select Options > As primary no.

Set up voice tags

For more information on setting up voice tags and other voice features, see Voice (Menu

7), 66.

Caller groups

You can add contacts list entries to any of five caller groups, and assign a unique ringing

tone or graphic to that group. This enables you to identify callers from the group by their

unique ringing tone or graphic.

Setup a group

1. At the start screen, scroll down to display a list of entries in your contacts list.

2. Scroll to a name you would like to add to a caller group, and press Details.

3. Select Options > Caller groups.

4. Scroll to the caller group to which you would like to add the name, and press Select.

Options

1. At the start screen, select Contacts > Caller groups.

Family, VIP, Friends, Business, and Other are the available caller groups.

2. Scroll to highlight a group, and press Select to display the following caller group

options:

Rename group—Rename the group to your preference.

Group ringing tone—Set the ringing tone for the group.

Group logo—Turn the graphic for the caller group on or off or view the graphic.

Group members—Add or remove members from the caller group.

Set up 1-touch dialing

You can associate any entry in the contacts list with a key from 2–9; then dial those

entries by pressing and holding the assigned key. See 1-touch dialing, 47 to activate or

deactivate 1-touch dialing.

Assign a key to 1-touch dialing

1. At the start screen, select Contacts > 1-touch dialing.

2. Scroll to an (empty) 1-touch dialing slot, and press Assign.

3. Enter the number (including the area code), and press OK, or press Search to retrieve

a number from the contacts list.

4. Enter a name for the number, and press OK.

If 1-touch dialing is off, the phone displays a prompt asking if you would like to turn

1-touch dialing on.

5. Press Yes to activate 1-touch dialing.

Change 1-touch dialing numbers

1. At the start screen, select Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing entry you wish to change, and select Options > Change.

3. Enter the new number; or press Search to retrieve a number from the contacts list,

and press OK.

4. Enter a name for the entry, and press OK.

Delete 1-touch dialing numbers

1. At the start screen, select Contacts > 1-touch dialing.

2. Scroll to the 1-touch dialing location you wish to delete, and press Options.

3. Select Delete > OK.

■Edit contacts list entries

1. Scroll to highlight the entry you would like to edit, and press Details.

Contacts list

2. Scroll to the phone number or detail you wish to edit, and press Options.

3. Select one of the following options:

Add voice tag—Add a voice tag to the contact.

Edit number—Edit an existing phone number of the contact.

Delete number—Delete a phone number from the contact.

Use number—Edit the number and associate a name with the number.

View—View the details of the contact.

Change type—Change the number type to General, Mobile, Home, Work, or Fax or

the detail type to E-mail, Web address, Street addr., or Note

As primary no.—Change the default number of the contact.

Add number—Add a number to the contact.

Add detail—Add an address or note to the contact.

Caller groups—Add the contact to an existing caller group.

Custom tone—Add a custom ring tone to the contact.

Send bus. card—Send the contact as a business card to another phone.

Send message—Create and send the contact a message.

1-touch dialing—Add the contact to your 1-touch dialing list.

Edit name—Edit the name of the contact.

View name—View the name of the contact.

Delete—Delete the entire contact entry from your contacts list.

4. Edit the option to your preference, and press OK.

■Delete contacts list entries

1. At the start screen, select Contacts > Delete.

2. To delete individual entries, select One by one.

3. Scroll to the entry you wish to delete, and select Delete > OK to confirm.

4. To delete the entire contents of your contacts list, select Delete all > OK.

5. Enter the security code, and press OK. See Security code, 59 for more information.

■View the contacts list

1. At the start screen, select Contacts. The following options are displayed:

Search—Find a name or select from a list.

Add new—Add a contact to your contacts list.

Edit name—Edit an existing name.

Delete—Delete a name and its associated numbers.

Add number—Add a number to an existing name.

Settings—Change the contacts list view or check the memory status of your phone.

1-touch dialing—View or modify the list of 1-touch dialing numbers.

Voice tags—Attach, listen to, or modify a voice tag to a contact in the

contacts list.

My number—View your own phone number.

Caller groups—View and edit the properties for any of the caller groups, including

Family, VIP, Friends, Business, or Other.

2. Scroll to an item, and press Select to activate the feature or enter its submenu.

Search for a name

1. At the start screen, scroll down to display the contents of your contacts list.

2. Press the key which corresponds to the first letter of the name for which you are

performing a search.

3. Scroll up and down to select a contact, and press Details to view the details.

Configure settings

You can select how the contacts appear in your contacts list and view the amount of

memory used or available in your phone.

1. At the start screen, select Contacts > Settings.

2. Select one of the following options:

Scrolling view—Select Name list, or Name and no. view.

Contacts list

Memory status—View the amount of phone memory used as well as the amount of

phone memory available

Note: For more information on used and available memory, see Shared memory,

■Send and receive contacts (business cards)

You can send and receive an entry in your contacts list using text messaging, if

supported by your wireless provider.

Send a business card

You can send a business card as a text message to a compatible phone or other

handheld device.

1. Highlight the entry from the contacts list that you wish to send, and select Details >

Options > Send bus. card > Via text msg. > Primary no. or All details.

Note: The Primary no. or All details options appear only if you have more

than one number or detail saved to the contact entry.

2. Enter the number for your recipient, or press Search to retrieve a number from your

contacts list.

3. Press OK and the business card is sent.

5. Messages (Menu 1)

If you have subscribed to a messaging service through your wireless provider, you can

send and receive text messages to compatible phones that also subscribe to a

compatible message service. You may also be able to attach and send predefined images

from the Templates folder.

Composed messages can be up to 160 characters in length. Using special (Unicode)

characters take up more space. If there are special characters in your message, the

indicator may not show the message length correctly. Before the message is sent, the

phone tells you if the message exceeds the maximum length allowed for one message.

To cancel sending, press Cancel, or save the message in the inbox.

Note: When sending messages, your device may display Message sent. This is an

indication that the message has been sent by your device to the message center

number programmed into your device. This is not an indication that the

message has been received at the intended destination. For more details, about

messaging services, check with your service provider.

■Text messages

Write and send

1. At the start screen, select Menu > Messages > Text messages > Create message >

Add number or Add e-mail.

To go quickly to the Create message display, scroll left from the start screen.

2. Enter the recipient’s phone number; or e-mail address, or press Search to retrieve a

number from your contacts list, and press OK.

3. Repeat step 2 to add more recipients, and press OK.

4. Select Options > Edit message.

5. Compose a message using the keypad, and select Options > Send.

Options

When you create a text message, depending on the mode of text input you are using

and the features supported by your wireless service provider, some or all of the

following options are available:

Messages (Menu 1)

Send—Send the message to one recipient.

List recipients—View the list of recipients for the message.

Settings—Set the priority of the message.

Save message—Select Archive to save the message in the Archive folder; select

Templates to save the message as one of your predefined templates in the Templates

folder.

Clear text—Erase the text from the message editor.

Exit editor—Exits the message editor.

Insert contact—Insert a name from your contacts list into your message.

Insert number—Insert a phone number or find a phone number in the contacts list.

Use template—Insert a predefined template into your message.

Insert picture—Insert a picture from a folder in the Gallery menu.

Edit word/Insert word—Enter or edit the text of a new word that might not appear in the

predictive text dictionary.

Insert symbol—Insert a special character into your message.

Predictive text—Choose a predictive text language and turn predictive text on or off.

Matches—View matches found in the dictionary for the word you want to use.

Templates

Templates are short, prewritten messages that can be recalled and inserted into new

text messages when you are short on time.

1. At the start screen, select Menu > Messages > Text messages > Create message >

Add number or Add e-mail.

2. Enter the recipient’s phone number; or e-mail address, or press Search to retrieve a

number from your contacts list, and press OK.

3. Repeat step 2 to add more recipients, and press OK.

4. Select Options > Edit message > Options > Use template.

5. Scroll to one of the available templates, and press Select.

6. Enter the text into your new message, and select Options > Send.

Read and reply

When you receive a message, a notification message and the unopened letter icon ( )

appear in the display.

1. Press Show to read the message, or Exit to move it to your inbox.

When you have unopened messages in your inbox, is shown in the upper left

corner of the start screen as a reminder.

Scroll up and down to view the whole message if necessary.

2. Select Options > Reply.

3. Select a Start reply with option, then compose your reply using the keypad.

4. Select Options > Send.

Options

When you read or reply to a text message, some or all of the following options are

available:

Delete—Discard the message.

Save message—Save the message to a folder.

Reply—Reply to the message. Create the message, and select Options > Send. The

sender’s phone number or e-mail is used as the default.

Use number—Choose Save, Add to contact, Send message, or Call.

Resend—Send the message again.

Save—Save the message to a folder.

Forward—Forward the message to another phone number.

Rename—Edit the title of the message.

Change sending options

1. At the start screen, select Menu > Messages > Text messages > Message settings >

Sending options.

2. Select the setting you wish to change:

Priority—Set the priority of the note as Normal or Urgent.

Delivery note—A note is sent to you confirming delivery of the message. Select On or

Off.

Messages (Menu 1)

Send callback number—A callback number is sent to the recipient. Select Off or your

phone number.

Change message settings

When the message memory is full, your phone cannot send or receive any new

messages. However, you can set your phone to automatically replace old messages in

the Inbox and Outbox folders when new ones arrive.

1. At the start screen, select Menu > Messages > Text messages > Message settings >

Other settings.

2. Select the setting you wish to change:

Message font size—Select Small font or Large font.

Message overwriting—Select Sent items only, Inbox only, S. items & inbox, or Off.

Save to sent items as sending—Select Always save, Always prompt, or Off.

Enhanced messages

Enhanced messaging is a Network Service. If your wireless service provider supports this

feature, enhanced messaging functions in the same manner as text messaging, but it

offers additional options for the style and content of the message.

When creating an enhanced message, the following options are available:

Add-ins—Select Sound, Animation, or Picture to add to the message.

Styles—Select the Font type, Font size, or Text alignment of the message.

Note: If you try to send an enhanced message to a phone that does not support

enhanced messaging, the enhanced messaging content will be stripped from

the message, leaving only the text you have entered.

While viewing a received enhanced message, the following options are available:

Sound—Select Play sound or Save sound.

Animation—Select Save animation.

Picture—Select Save picture.

■Voice messages

If you subscribe to voice mail, your wireless provider will furnish you with a voice

mailbox number. You need to save this number to your phone to use voice mail. When

you receive a voice message, your phone lets you know by beeping, displaying a

message, or both. If you receive more than one message, your phone shows the number

of messages received.

Save voice mailbox number

Your wireless provider may have already saved your voice mailbox number to your

phone. If so, the number will appear in the display in step 1. Press OK to leave the

number unchanged.

1. At the start screen, select Menu > Messages > Voice messages > Voice mailbox

number.

The Voice mailbox number screen appears in the display.

2. If the box is empty, enter the voice mailbox area code and number.

3. Press OK.

Call and setup your voice mail

1. Once you have saved the voice mailbox number, press and hold 1 .

2. When you connect to voice mail and the prerecorded greeting begins, follow the

service’s automated instructions to setup your voice mail.

Listen to your voice messages

Once you have setup voice mail, you can dial the voice mailbox number in one of four

ways:

• Dial the number using the keypad.

• Press and hold 1 .

•Press Listen if there is a notification message in the display.

• At the start screen, select Menu > Messages > Voice messages > Listen to voice

messages.

Once you connect and the prerecorded greeting begins, follow the automated

instructions to listen to your voice messages.

Messages (Menu 1)

Automate voice mail

You can insert special characters called dialing codes into phone numbers such as voice

mail, and save the number to a 1-touch dialing location. Dialing codes instruct the

receiving system to pause, wait, bypass, or accept the numbers that follow them in the

dialing string.

Note: Voice mail services vary by service provider. The following instructions

are examples of common operations. Please check with your service provider for

specific instructions for using your voice mail service.

Write down voice mailbox number and process

1. Write down your voice mailbox number.

2. Call and check your voice mail as you normally would.

3. Write down your interaction with the recorded prompts step-by-step. Keep in mind

that each voice mail service may vary. However, it should look something like this:

Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press #.

Be precise; you will need this information in Setup voice mail with dialing codes, 35.

Insert dialing codes

Press * repeatedly to cycle through dialing codes. Once the desired code appears in the

display, pause briefly and the code is inserted into the dialing string.

The following dialing codes are available:

*—Bypasses a set of instructions.

p—Pauses for 2.5 seconds before sending any numbers that follow.

w—Waits for you to press the Talk key before sending the numbers or codes that follow.

Setup voice mail with dialing codes

1. At the start screen, select Contacts > 1-touch dialing.

2. Scroll to an (empty) 1-touch dialing slot and press Assign.

3. Enter your voice mailbox number, including the area code.

4. Refer to dialing codes and enter any codes as necessary using the information that

you wrote down from Setup voice mail with dialing codes, 35.

For example, if you pause for 5 seconds after connecting to voice mail, enter p twice

after the voice mailbox number, for example, 2145551212pp.

5. Enter any remaining pauses or other information that allows you to listen to your

messages, and press OK.

6. Enter a name (such as Voice Mail), and press OK.

To dial and listen to your voice mail, press and hold the assigned 1-touch dialing key at

the start screen.

■Minibrowser messages

Minibrowser messaging is a network service. See Network services, 6 for more

information.

If your wireless service provider supports this feature, you can use the Minibrowser to

check for e-mail messages. At the start screen, select Menu > Messages > Minibrowser

messages > Connect.

See Minibrowser (Menu 8), 70 for more information on using the Minibrowser in your

phone to access web pages.

■Message folders

Save messages to folders

You can save drafts of messages or received messages to an existing folder or to a folder

that you have created.

1. Open the received message or create a new message, and press Options.

2. Select Save message > Sent items, Templates, Archive, or a folder you have created

on your own.

View saved messages

1. At the start screen, select Menu > Messages > Text messages.

2. Select the folder containing the message you wish to view:

Inbox—Messages are automatically stored in this folder after they have been read or

if you press Back when the message notification appears on the start screen.

Sent items—Messages that have been sent are automatically stored in this folder.

Archive—Store messages that have been read and that you want to keep in this

folder.

Messages (Menu 1)

Templates—Pictures and prewritten templates are stored in this folder. Preloaded

templates can be edited and customized.

My folders—Keep your messages organized by creating custom folders and saving

some of your messages here. Select Options > Add folder to add a custom folder. You

can also select Options > Rename folder or Options > Delete folder to rename or

delete a folder you have created.

3. Once the folder opens, scroll to the message you wish to view, and press Select.

■Delete messages

If your message memory is full and you have more messages waiting at the network, No

space for new messages appears on the start screen. You can do the following:

• Read some of the unread messages, and delete them individually.

• Delete messages from some of your folders.

A single message

To delete a single message, you need to open it first.

1. At the start screen, select Menu > Messages > Text messages.

2. Scroll to the folder containing the message you wish to delete, and press Select.

3. Scroll to the message you wish to delete, and press Select.

4. Select Options > Delete.

5. Press OK to delete the message or Back to exit.

All messages in a folder

1. At the start screen, select Menu > Messages > Text messages > Delete messages.

2. Scroll to the folder containing the messages you wish to delete, and press Select:

All—Deletes all messages in all of the folders.

All read—Deletes any messages which have been read in all of the folders.

All unread—Deletes any messages which have not been read in all of the folders.

Inbox—Deletes all messages from the Inbox folder.

Sent items—Deletes all messages from the Sent items folder.

Archive—Deletes all messages from the Archive folder.

3. Press OK to empty the folder.

Note: Only folders created in My folders can be deleted. The Inbox, Sent

items, Archive, and Templates folders are protected. When you delete a

folder, all messages in the folder are also deleted.

Call log (Menu 2)

6. Call log (Menu 2)

Call log stores information about the last 20 missed, 20 received, and 20 dialed calls. It

also adds the total duration of all calls. When the number of calls exceed the maximum,

the most recent call replaces the oldest.

Whether viewing missed, received, or dialed calls, the menu options are the same:

Call time—Display the date and time of the call.

Send message—Send a message to the number.

View number—Display the number.

Use number—Edit the number and associate a name with the number.

Save—Enter a name for the number and save it to your contacts list.

Add to contact—Add the number to an existing entry in your contacts list, if the number

is not associated with a name.

Delete—Clear the number from memory.

Call—Call the number.

■View missed calls

Note: The missed calls feature does not function when your phone is switched

off.

Missed calls are calls that were never answered.

1. If the message notification display appears in the display, press List.

2. When the phone number appears in the display, press Options.

3. Scroll to an option, and press Select to activate the option.

1. At the start screen, select Menu > Call log > Missed calls.

2. Scroll to a name or number, and press Options.

3. Scroll to an option, and press Select to view or activate the option.

■View received calls

Received calls are calls that have been answered.

1. At the start screen, select Menu > Call log > Received calls.

2. Scroll to a name or number, and press Options.

3. Scroll to an option, and press Select to view or activate the option.

■View dialed numbers

Dialed calls are previous numbers you have dialed from your phone:

1. At the start screen, press the Talk key.

At the start screen, select Menu > Call log > Dialed numbers.

2. Scroll to a name or number, and press Options.

3. Scroll to an option, and press Select to view or activate the option.

Call times

You can make or receive up to five calls to or from the same number and view the time

each call occurred. Your phone clock must be set for this feature to work accurately.

1. While viewing a missed or received call, select Options > Call time.

2. Scroll to view the most recent call times from this number; press Back to return to

the options list.

■Delete call logs

You can delete any missed, dialed, or received calls from phone memory.

1. At the start screen, select Menu > Call log > Delete recent call lists.

2. Select the call type you would like to clear (All, Missed, Received or Dialed).

■View duration of calls

Note: The actual time invoiced for calls and services by your service provider

may vary, depending on network features, rounding off for billing, taxes, and so

forth.

Call log (Menu 2)

Last call

1. To view the duration of the last call, at the start screen, select Menu > Call log > Call

timers > Duration of last call.

2. To activate the call timer on the start screen while in a call, select Details > Show

call time on display > On or Off.

Dialed calls

1. To view the duration of all dialed calls, at the start screen, select Menu > Call log >

Call timers > Duration of dialed calls.

2. To view the duration of dialed calls placed while in the home network or while

roaming, select Details > Home or Roaming.

Received calls

1. To view the duration of all received calls, at the start screen, select Menu > Call log

> Call timers > Duration of received calls for more information.

2. To view the duration of received calls placed while in the home network or while

roaming, select Details > Home or Roaming.

All calls

At the start screen, select Menu > Call log > Call timers > Duration of all calls.

Life timer

At the start screen, select Menu > Call log > Call timers > Life timer.

Note: Some timers, including the life timer, may be reset during service or

software upgrades.

Clear timers

1. At the start screen, select Menu > Call log > Call timers > Clear timers > OK.

2. Enter your security code, and press OK. See Security code, 59 for more information.

Note: All call timers, except the life timer, are reset to zero when Clear timers is

selected.

■View duration of data/fax calls

Data/fax calls are a network service. See Network services, 6 for more information. If

your wireless service provider supports this feature, you can view the size or duration of

sent or received data and fax calls.

Note: The actual time invoiced for calls and services by your service provider

may vary, depending on network features, rounding off for billing, taxes, and so

forth.

1. At the start screen, select Menu > Call log > Data/fax calls.

2. Scroll to one of the following options:

Last sent data/fax—View the size (KB) of the last send data/fax call.

Last received data/fax—View the size (KBKB) of the last received data/fax call.

All sent data/fax—View the size (KB) of all sent data and fax calls.

All received data/fax—View the size (KB) of all received data and fax calls.

Duration of last data/fax call—View the duration time of the last data or

fax call.

Duration of all data/fax calls—View the duration time of all calls.

Clear all data/fax logs—Press OK > Yes to clear all data/fax logs.

■View duration of minibrowser

Minibrowser is a network service. See Network services, 6 for more information. If your

wireless service provider supports this feature, you can view the size or duration of sent

or received data from the minibrowser.

Note: The actual time invoiced for calls and services by your service provider

may vary, depending on network features, rounding off for billing, taxes, and so

forth.

1. At the start screen, select Menu > Call log > Minibrowser calls.

2. Scroll to one of the following options:

Last sent browser data—View the size (KB) of the last send browser data.

Last received browser data—View the size (KB) of the last received data.

All sent browser data—View the size (KB) of all sent browser data.

Call log (Menu 2)

All received browser data—View the size (KB) of all received browser data.

Last browser session—View the duration time of the last browser session.

All browser sessions—View the duration time of all browser sessions.

Clear all browser logs—Press OK > Yes to clear all browser logs.

7. Profiles (Menu 3)

Profiles define how your phone reacts when you receive a call or message, how your

keypad sounds when you press a key, and more. Ringing options, keypad tones, and

other settings for each of the available profiles can be left at their default setting, or

customized to suit your needs. The following profiles are available: Normal, Silent,

Meeting, Outdoor, and Pager.

Profiles are also available for enhancements such as a headset and car kit. See

Enhancement settings, 54 for more information about enhancement profiles.

■Activate

1. At the start screen, select Menu > Profiles.

2. Scroll to the profile of your choice, and press Select.

3. Select Activate.

■Customize a profile

You can customize any of the profiles a variety of ways.

1. At the start screen, select Menu > Profiles.

2. Select the profile you wish to customize.

3. Select Customize.

4. Select the option you want to customize (Incoming call alert, Ringing tone, Ringing

volume, Vibrating alert, Message alert tone, Keypad tones, Warning tones, Alert for,

or Profile name).

Note: You cannot rename the Normal profile.

■Set a timed profile

Timed profiles can be used to prevent missed calls. For example, suppose you attend an

event that requires your phone be set to Silent before the event starts, but you forget to

return it to Normal until long after the event. A timed profile can prevent missed calls by

returning your phone to the default profile at a time you specify.

Profiles (Menu 3)

Note: Timed profiles can be set up to 24 hours in advance.

1. At the start screen, select Menu > Profiles.

2. Select the profile you wish to activate and set for timed expiration.

3. Select Timed.

4. Enter the time for the profile to expire, and press OK.

8. Settings (Menu 4)

Use this menu to change the time and date settings, call settings, phone settings,

display settings, tone settings, enhancement settings, security settings, system settings,

network services, and to restore the factory settings.

■Call settings

Anykey answer

Anykey answer allows you to answer an incoming call by briefly pressing any key except

the Power key, Right selection key, or End key.

At the start screen, select Menu > Settings > Call settings > Anykey answer > On or Off.

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a fast busy signal

when you dial. With automatic redial activated, your phone redials the number (number

of times is specified by the network), and notifies you once the network is available.

At the start screen, select Menu > Settings > Call settings > Automatic redial >

On or Off.

International prefix

You can store an international dialing prefix into your phone. When you enter "+" at the

beginning of a phone number, your phone automatically inserts the international

dialing prefix that you have stored.

1. At the start screen, select Menu > Settings > Call settings > International dialing

prefix.

2. Enter the international dialing prefix (for example, 0011) and press OK.

3. At the start screen, use + to enter the phone number you wish to call. (For example,

+3546789.)

The phone dials the international dialing prefix you have stored in your phone and

the phone number you have entered. (For example, the phone dials 0011354789.)

Settings (Menu 4)

1-touch dialing

You can activate or deactivate 1-touch dialing. At the start screen, select Menu >

Settings > Call settings > 1-touch dialing > On or Off. For more information on entering

1-touch dialing numbers, see Set up 1-touch dialing, 26.

Automatic update of service

Your phone is capable of receiving updates to wireless services sent to your phone by

your service provider.

At the start screen, select Menu > Settings > Call settings > Auto-update of service > On

or Off.

Minibrowser confirmation

You can give confirmation when you connect or disconnect from the minibrowser.

1. At the start screen, select Menu > Settings > Call settings > Minibrowser

confirmation.

2. Scroll to one of the following options, and press Select:

None—The phone will not ask for confirmation before connecting or disconnecting

from the minibrowser.

On connection—Your phone asks for confirmation before connecting to the

minibrowser.

On exit—Your phone asks for confirmation before disconnecting from the

minibrowser.

Both—Your phone asks for confirmation before connecting or disconnecting from

the minibrowser.

Calling cards

If you use a calling card for long distance calls, you can save the calling card numbers in

your phone. Your phone can store up to four calling cards.

Note: Contact your calling card company for more information.

Save information

1. At the start screen, select Menu > Settings > Call settings > Calling card.

2. Enter your security code, and press OK. See Security code, 59 for more information.

3. Scroll to one of the four card memory locations, and select Options > Edit > OK >

Dialing sequence.

4. Select one of the following sequence types:

Access no.+ phone no.+ card no.—Dial 1-800 access number, phone number, then

card number (+ PIN if required)

Access no.+ card no.+ phone no.—Dial 1-800 access number, card number (+ PIN if

required), then phone number

Prefix+ phone no.+ card no.—Dial the prefix (numbers that must precede the phone

number) and phone number you want to dial, then card number (+ PIN if required)

5. Enter the required information (access number or prefix and card number), and press

OK to confirm your entries.

6. Select Card name.

7. Enter the card name, and press OK.

Make calls

After you have saved your calling card information in your phone, you can make a call

using your calling card.

1. At the start screen, select Menu > Settings > Call settings > Calling card.

2. Enter your security code, and press OK. See Security code, 59 for more information.

3. Scroll to the calling card of your choice, select Options > Select > OK.

4. Press the End key to return to the start screen; then enter the phone number,

including any prefix (such as 0 or 1) that your calling card may require when you

make a calling card call.

See your calling card for instructions.

5. Press and hold the Talk key for a few seconds until Card call is displayed.

6. When you hear the tone or system message, press OK.

Settings (Menu 4)

Receive data or fax calls

Data or fax calls is a network service. See Network services, 6 for more information.

If your wireless service provider supports this feature, you can set up the phone to send

or receive data or fax calls when a terminal, such as a PDA or PC, is connected.

For better performance during data calls, place the phone on a stationary surface with

the keypad facing downward. Do not move the phone by holding it in your hand during a

data call.

Note: For more information on connectivity, refer to the PC/PDA Connectivity

Guide. The PC/PDA Connectivity Guide can be downloaded from the Nokia

website at http://www.nokia.com/us.

1. At the start screen, select Menu > Settings > Call settings > Data/fax calls >

Incoming data/fax call.

2. Select one of the following options:

Normal—The phone receives incoming calls as usual.

Data calls only—The phone receives only data calls.

Fax calls only—The phone receives only fax calls.

3. When you are finished receiving the fax or data call, repeat Steps 1 and 2 and select

Normal.

Data transfer

You can view the transmission speed when sending or receiving data or fax calls.

At the start screen, select Menu > Settings > Call settings > Data/fax calls > Data rate

display > Graphic or Off.

Call summary

Your phone can display the time spent on a call when you hang up.

At the start screen, select Menu > Settings > Call settings > Call summary > On or Off.

■Phone settings

Phone language

1. At the start screen, select Menu > Settings > Phone settings > Phone language.

2. Scroll to the language of your choice, and press Select.

The phone language affects the time and date formats of the clock, alarm clock, and

calendar.

Automatic keyguard

You can set the keypad of your phone to lock automatically after a preset time delay

(from 10 seconds to 60 minutes).

1. At the start screen, select Menu > Settings > Phone settings > Automatic keyguard

> On or Off.

2. If you selected On, Set delay appears in the display.

3. Enter the delay (in minutes and seconds), and press OK.

When keyguard is on, it may be possible to dial the emergency number

programmed into your phone. Key in the emergency number, and press the Talk

key. The number is displayed only after you have keyed in its last digit.

Touch tones

Touch tones or DTMF tones, are the tones that sound when you press the keys on your

phone keypad. You can use touch tones for many automated dial-up services such as

banking and airlines, or for entering your voice mailbox number and password.

Touch tones are sent during an active call. You can send them manually from your

phone keypad, or send them automatically by saving them in your phone.

Set type

1. At the start screen, select Menu > Settings > Phone settings > Touch tones >

Manual touch tones.

2. Select one of the following options:

Continuous—The tone sounds for as long as you press and hold a key.

Fixed—Used to send tones of the duration you specify in the Touch tone length

option.

Off—Used to turn off tones. No tones are sent when you press a key.

Set length

You can also specify touch tone length when using the Fixed option.

Settings (Menu 4)

At the start screen, select Menu > Settings > Phone settings > Touch tones > Touch tone

length > Short (0.1 seconds) or Long (0.5 seconds).

Welcome note

You can write a welcome note which briefly appears on the display screen whenever you

switch your phone on.

Note: Predictive text input is not available for entering welcome note text.

1. At the start screen, select Menu > Settings > Phone settings > Welcome note.

2. Enter a note (up to 44 characters).

Press * to display and select from available special characters.

3. When you are finished, select Options > Save.

Select Delete if you want to delete the previous text and begin creating another

welcome note.

Confirm UIM (CDMA SIM) service actions

This option allows you to request notification when your service provider makes

changes to UIM (CDMA SIM)-related services.

For availability, rates, and information on using UIM (CDMA SIM) services, contact your

UIM (CDMA SIM) card vendor, for example, network operator, service provider, or other

vendor.

Select Menu > Settings > Phone settings > Confirm UIM service actions > Yes or No.

Help text

Your phone displays brief descriptions for most menu items. When you arrive at a

feature or menu, pause for about 10 seconds and wait for the help text to display. Use

the scroll keys to page through the full help text, if necessary.

The default setting for help text is on. However, you can turn help text on or off.

At the start screen, select Menu > Settings > Phone settings > Help text activation > On

or Off.

■Time settings

Time

Show/hide the clock

At the start screen, select Menu > Settings > Time settings > Clock > Show clock or Hide

clock.

Set the time

1. At the start screen, select Menu > Settings > Time settings > Clock > Set the time.

2. Enter the time (in hh:mm format), and press OK.

3. Select am or pm (if 12-hour format is selected).

Change the format

At the start screen, select Menu > Settings > Time settings > Clock > Time format >

24-hour or 12-hour.

Date

Show/hide the date

At the start screen, select Menu > Settings > Time settings > Date > Show date or Hide

date.

Set the date

1. At the start screen, select Menu > Settings > Time settings > Date > Set the date.

2. Enter the date, and press OK.

Change the date format

1. At the start screen, select Menu > Settings > Time settings > Date.

2. Scroll to the Date separator, and press Select.

3. Select the separator of your choice.

4. Scroll to Date format, and press Select.

5. Select the format of your choice.

Settings (Menu 4)

Set the auto-update of date and time

Auto-update is a network service. See Network services, 6 for more information.

If your wireless service provider supports this feature, you can allow the digital network

to set the clock, which is useful when you are out of your home area, for example, when

you have traveled to another network or time zone.

At the start screen, select Menu > Settings > Time settings > Auto-update of date &

time > On, Confirm first, or Off.

If you use the Auto-update of date & time option while outside your digital network, you

may be prompted to enter the time manually. Network time will replace the time and

date when you re-enter your digital network.

If your battery has been removed or has drained outside the digital network, you may be

prompted to enter the time manually (once the battery is replaced or recharged, and you

are still outside of the digital network).

■Display settings

Wallpaper

You can set your phone to display a background picture (wallpaper) on the start screen.

1. At the start screen, select Menu > Settings > Display settings > Wallpaper >

Select wallpap.

2. Highlight the Graphics folder, and press Open.

3. Browse the folder.

4. When you arrive at the image of your choice, select Options > Set as wallpap.

To activate or deactivate wallpaper, at the start screen, select Menu > Settings >

Display settings > Wallpaper > On or Off.

Color scheme

You can change the color of some display components in your phone, such as indicators

and signal bars.

1. At the start screen, select Menu > Settings > Display settings > Color schemes.

2. Scroll to the color scheme of your choice, and press Select.

Banner

Banner is a network service. See Network services, 6 for more information.

If your wireless service provider supports this feature, you can choose whether the

display shows the operator logo when the phone is in the idle state.

At the start screen, select Menu > Settings > Display settings > Banner > Default or

Customize.

Screen saver timeout

If you have turned the screen saver on, the screen saver is activated when no function of

the phone is used after a preset period of time. Press any key to deactivate the screen

saver. You can set your phone to display a screen saver after a preset time or after a

custom time (up to 60 minutes) of your choosing.

1. At the start screen, select Menu > Settings > Display settings > Screen saver

timeout.

2. Scroll to the option of your choice and press Select.

3. If you want to set a custom time (up to 60 minutes), select Other, enter the custom

time, and press OK.

Display brightness

You can change the brightness of your phone display.

1. At the start screen, select Menu > Settings > Display settings > Display brightness.

2. Scroll left or right to adjust the contrast level to your preference.

3. Press OK to accept your settings.

■Tone settings

From this menu, you can adjust the ringing volume, keypad tones, and other tone

settings for the currently active profile. See Customize a profile, 44 for more

information on profile settings.

■Enhancement settings

The enhancement settings menu is shown only if the phone is or has been connected to

a compatible enhancement.

Settings (Menu 4)

At the start screen, select Menu > Settings > Enhancement settings > Headset,

Handsfree, Loopset, TTY/TDD, or Charger.

Headset

Scroll to the option of your choice, and press Select to enter the submenu and modify its

settings.

Default profile—Choose the profile you wish to be automatically activated when a

headset is connected

Automatic answer—Calls are answered automatically after one ring when a headset is

connected. Select On or Off.

Handsfree

Scroll to the option of your choice, and press Select to enter the submenu and modify its

settings.

Default profile—Choose the profile you wish to be automatically activated when your

phone is connected to a car kit.

Automatic answer—Calls are answered automatically after one ring when a car kit is

connected. Select On or Off.

Lights—Choose to keep the phone lights always on, or to shut off automatically after

several seconds. Select On or Automatic.

Loopset

The LPS-4 Loopset (for use with T-coil equipped hearing aids) is recommended for use

with your phone. Scroll to the option of your choice, and press Select to enter the

submenu and modify its settings.

Default profile—Choose the profile you wish to be automatically activated when a

loopset is connected

Automatic answer—Calls are answered automatically after one ring when a loopset is

connected. Select On or Off.

TTY/TDD

In addition to the Nokia phone, you will need the following for TTY/TDD communication:

• A TTY/TDD device that is cellular ready or cellular compatible.

• A cable for connecting the TTY/TDD to your Nokia phone, usually supplied by the

manufacturer of the TTY/TDD device.

Set up the TTY/TDD profile

You can connect your phone directly to the TTY/TDD device. In order for your phone to

recognize the TTY/TDD, you will need to set up the TTY/TDD profile.

Important: Some manufacturers of TTY/TDD devices suggest that the phone be

at least 18 inches from the TTY/TDD device. When connecting to any other

device, read its user guide or contact its manufacturer for detailed instructions

and safety information.

1. Connect one end of the cable to the TTY/TDD device.

2. Insert the other end of the cable into the 2.5-mm headset jack on the side of your

phone.

3. At the start screen, select Menu > Settings > Enhancement settings > TTY/TDD > Use

TTY > Yes.

TTY/TDD calls

• Check with the manufacturer of the TTY/TDD device for a connecting cable that is

compatible with the Nokia phone.

• TTY/TDD communications depend on network availability. Check with your service

provider for availability and description of services.

Make a call

1. At the start screen, enter the number, and press the Talk key.

2. When the receiving party answers, begin typing your conversation on the TTY/TDD.

3. Press the End key to end the call.

Receive a call

1. Make sure the TTY/TDD device is connected to your phone.

2. Press the Talk key to answer the call, and type your responses on the TTY/TDD.

3. Press the End key to end the call.

Settings (Menu 4)

Charger

Scroll to the option of your choice, and press Select to enter the submenu and modify its

settings.

Default profile—Choose the profile you wish to be automatically activated when your

phone is connected to the charger.

Lights—Choose to keep the phone lights always on, or to shut off automatically after

several seconds. Select On or Automatic.

■Security settings

Restrict calls

Call restriction is a network service. See Network services, 6 for more information.

If your wireless service providers supports this feature, you can restrict the calls your

phone can make and receive. When calls are restricted, calls still may be possible to the

official emergency number programmed into your phone.

Note: Contact your service provider for the restriction password.

1. At the start screen, select Menu > Settings > Security settings > Call restrictions.

2. Enter the security code, and press OK. See Security code, 59 for more information.

3. Select the types of calls you wish to restrict:

Restrict outgoing calls—Calls cannot be made.

Restrict incoming calls—Calls cannot be received.

4. Select an option (Select, Add restriction, Edit, or Delete).

Activate or deactivate phone lock

The phone lock feature protects your phone from unauthorized outgoing calls or

unauthorized access to information stored in the phone. When phone lock is activated,

Phone locked is displayed each time you turn your phone on or off.

When the phone is locked, calls still may be possible to the official emergency number

programmed into your phone.

1. At the start screen, select Menu > Settings > Security settings > Access codes >

Phone lock.

2. Enter the lock code, and press OK. See Lock code, 58 for more information.

3. Select one of the following options:

On—Immediately turns on the phone lock feature.

Off—Immediately turns off the phone lock feature.

If you selected On, you must enter your lock code before the phone will function

normally. Once the lock code has been accepted, your phone functions normally.

Note: Call not allowed is displayed if you attempt to place a call while phone is

locked.

To answer a call with phone lock on, press Answer or the Talk key.

Allow numbers when phone locked

When phone lock is on, the only outgoing calls that can be made are to the following

numbers:

• The emergency number programmed into your phone (for example, 911).

• The number stored in the Allowed number when phone locked location.

1. At the start screen, select Menu > Settings > Security settings > Access codes >

Allowed number when phone locked.

2. Enter the lock code, and press OK. See Lock code, 58 for more information.

3. Enter the phone number; or press Search, recall the number from the phone book,

and press OK.

Call the allowed phone number

1. At the start screen, press the Scroll up or Scroll down key.

2. Press the Talk key to place the call.

Lock code

Note: Avoid using codes similar to emergency numbers such as 911 to prevent

accidental dialing of the emergency number.

The preset lock code is 1234 or the last four digits of your phone number. If you enter an

incorrect lock code five times in a row, your phone will prompt you for the security code.

Settings (Menu 4)

Note: If you enter the wrong lock code 5 times in succession, you will not be

able to enter a code for 5 minutes, even if you power off the phone between

incorrect entries.

1. At the start screen, select Menu > Settings > Security settings > Access codes >

Change lock code.

2. Enter the current (or default) lock code, and press OK.

3. Enter the new lock code (must be 4 characters in length), and press OK.

4. Reenter the new lock code for verification, and press OK.

Note: When you change your lock code, make sure you store it in a safe place,

away from your phone. Avoid entering access codes similar to emergency

numbers to prevent accidental emergency calls.

Security code

Note: Avoid using codes similar to emergency numbers such as 911 to prevent

accidental dialing of the emergency number.

The security code controls access to features such as the security level and is supplied

with the phone. The preset security code is 12345. Once you change the security code,

keep the new code secret and in a safe place separate from your phone.

Note: If you enter the wrong security code 5 times in succession, you will not be

able to enter a code for 5 minutes, even if you power off the phone between

incorrect entries.

1. At the start screen, select Menu > Settings > Security settings > Access codes >

Change security code.

2. Enter the current security code (default is 12345), and press OK.

3. Enter the new security code (must be 5 characters in length), and press OK.

4. Enter the new security code again, and press OK.

Voice privacy

Voice privacy is a network service. See Network services, 6 for more information. If your

wireless service provider supports this feature, the voice privacy feature protects the

privacy of your current phone conversation from other callers placing phone calls on

your same network.

At the start screen, select Menu > Settings > Security settings > Voice privacy > On or

Off.

■Network

The menu options you see in your phone are based on your service provider’s network.

The network determines which options actually appear in the phone menu. Check with

your service provider for more information.

The Network menu allows you to customize the way your phone chooses a network in

which to operate while you are within or outside of your primary or home system. Your

phone is set to search for the most cost-effective network. If your phone cannot find a

preferred network, it selects a network automatically based on the option you choose in

the Network menu.

Roaming options

You can set your phone to roam or search for another network when you are not in your

home area.

1. At the start screen, select Menu > Settings > Network > Roaming options.

2. Select one of the following options:

Home only—You can make and receive calls in your home area only.

Automatic—The phone automatically searches for service in another digital

network. If one is not found, the phone uses analog service. The roaming rate applies

when not in the home service area.

3. Press OK, if necessary, to confirm the activation.

Mode

You can choose whether your phone uses digital or analog service.

1. At the start screen, select Menu > Settings > Network > Mode.

2. Select one of the following service options:

Digital pref.—The phone works in digital mode, but will also work in analog mode

when digital mode is unavailable.

Digital only—The phone only works in digital mode.

Analog only—The phone only works in analog mode.

Settings (Menu 4)

■Network services

The following features are network services. See Network services, 6 for more

information.

Store a feature code

1. At the start screen, select Menu > Settings > Network services > Network feature

setting.

2. Enter the feature code from your service provider (for example, *633), and press OK.

3. Select the type of forwarding that matches the feature code you entered (for

example, Call forwarding).

The activated feature code is now stored in your phone, and you are returned to the

Feature code field. Continue entering other feature codes (for example, *633), or

press the End key to return to the start screen.

Note: Once you enter a network feature code successfully the feature becomes

visible in the Network services menu.

Call forwarding

Call forwarding tells your network to redirect incoming calls to another number. Call

forwarding is a network service and may not work the same in all networks, so contact

your wireless provider for availability.

Activate

Note: This is a network service. All options listed may not appear in the display.

Contact your wireless provider for more information.

1. At the start screen, select Menu > Settings > Network services > Call forwarding.

2. Select one of the following options:

Forward all calls—Forward all calls to the number you specify.

Forward if busy—Forward incoming calls when you are in a call.

Forward if not answered—Forward incoming calls to another number if you are

unable to answer. You can set a delay before forwarding takes place.

Forward if out of reach—Forward incoming calls when your phone is off.

Cancel all call forwarding—Cancel any call forwarding options you have set.

3. Select Activate.

4. Scroll to the destination to which your calls will be forwarded, and press Select.

5. Enter the number to which your calls, data, or other information will be forwarded,

and press OK.

Cancel

At the start screen, select Menu > Settings > Network services > Call forwarding >

Cancel all call forwarding.

Note: Cancel all call forwarding may affect your ability to receive voice mail

messages. Contact your wireless provider for specific details.

Call waiting

If your wireless provider supports this feature, call waiting notifies you of an incoming

call even while you are in a call. You can then accept, reject, or ignore the incoming call.

1. At the start screen, select Menu > Settings > Network services > Call waiting >

Activate or Cancel.

2. During a call, press Answer or the Talk key to answer the waiting call.

The first call is put on hold.

3. Press the End key to end the active call.

Send own caller ID when calling

If your wireless service provider supports this feature, you can prevent your number

from appearing on the receiving party’s caller ID.

At the start screen, select Menu > Settings > Network services > Send my caller ID >

Yes or No.

View your own phone number

At the start screen, select Menu > Settings > Network services > Own number selection.

Settings (Menu 4)

■Restore factory settings

You can reset some of the menu settings to their original values. Data that you have

entered or downloaded is not deleted, for example, entries in your contacts list are not

affected.

1. At the start screen, select Menu > Settings > Restore factory settings.

2. Enter the security code, and press OK. See Security code, 59 for more information.

9. Gallery (Menu 5)

You can save photos and ringing tones to folders in the gallery, or create folders of your

own and save them there. You can download images and tones using web sites or Nokia

PC Suite.

■Open the gallery

At the start screen, select Menu > Gallery. The following submenus are displayed:

View folders—Explore the folders in the gallery menu. See View folders in the following

section for more info.

Add folder—Add a folder of your own.

Delete folder—Delete a folder you have created.

Rename folder—Rename a folder you have created.

■View folders

1. At the start screen, select Menu > Gallery > View folders > Images, Graphics, or

Tones > Open.

2. Scroll through the list of graphics or tones, press Options > Select to activate the

option (Open, Delete, Move, Rename, Set as wallpap./Set as ring tone, Details or

Sort) or to enter its submenu.

Games (Menu 6)

10. Games (Menu 6)

Challenge yourself or a friend to one of the fun games in your phone.

Note: Some menus listed are network services. Contact your wireless provider

for more information.

■Play a game

1. At the start screen, select Menu > Games > Select game.

2. Scroll to a game, and press Open or the Talk key.

3. Select one of the following options (if supported by the particular game):

New game—Launches a new game.

High scores—View the high scores for this game (if previously played).

Instructions—View instructions for playing the game. Scroll down to read more.

■Game settings

1. At the start screen, select Menu > Games.

2. Scroll to one of the following game submenus:

Select game—Select a game or enter a game option list. See Game options, 65 for

more information.

Memory—Check the available memory for games and game-related applications.

Settings—Turn Game sounds, Game lights, and Shakes on or off.

3. Press Select to enter the submenu, and choose other settings.

■Game options

1. While viewing the games list, press Options.

2. Scroll to an option (Open, Delete, or Details), and press Select to activate the option

or enter a submenu.

11. Voice (Menu 7)

■Voice dialing

You can dial up to 10 stored numbers using voice dialing.

Before using voice tags, note that:

• Voice tags are not language dependent. They are dependent on the speaker’s voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags and use them in a

quiet environment.

• Very short names are not accepted. Use long names and avoid similar names for

different numbers.

Note: Using voice tags may be difficult in a noisy environment or during an

emergency, so you should not rely solely upon voice dialing in all circumstances.

Assign a voice tag to an entry

Before you can use voice dialing, you must first assign a voice tag to the number.

1. At the start screen, scroll down to enter the contacts list.

2. Highlight the contact you want to assign a voice tag, press Details > Options > Add

voice tag > Start.

3. Speak clearly into the microphone.

Note: Do not press Quit unless you want to cancel the recording.

The phone automatically stops recording and saves and replays the voice tag. The

icon appears next to commands which have voice tags assigned.

If recording is not successful, your phone displays Voice system error. Press Options >

Add voice tag, and repeat Step 3.

Dial a number

1. Press and hold Contacts.

2. When you hear several beeps and Please speak now appears, release the key.

Voice (Menu 7)

3. Pronounce the voice tag clearly into the microphone.

When the phone finds the voice tag, Found: appears, and the phone automatically

dials the number. If the phone does not locate a number or recognize the voice tag,

No match found appears.

Voice tags

After you have associated a voice tag to a contact, you can choose one of the following

options:

Play back

1. Select Menu > Voice > Voice tags.

2. Press Select, and scroll to the name with the voice tag you want to hear.

3. Select Options > Playback.

Change

1. Select Menu > Voice > Voice tags.

2. Press Select, and scroll to the name with the voice tag you want to change.

3. Select Options > Change.

4. Press Start. The phone repeats your voice tag, and Voice tag saved appears.

Delete

1. Select Menu > Voice > Voice tags.

2. Press Select, then scroll to the name with the voice tag you want to erase.

3. Select Options > Delete > OK.

■Voice commands

You can set as many as five voice commands, which allow hands-free operation of

certain phone features.

Assign a voice tag to a command

Before using voice commands, you must first add a voice tag to the phone function.

1. At the start screen, select Menu > Voice > Voice commands.

2. Select the phone function you wish to tag (Profiles, Voice mailbox, Recorder or Call

log).

3. If necessary, scroll to an option associated with that function, and press Select.

4. Select Options > Add command.

5. Press Start, and speak the voice tag clearly into the microphone.

Note: Do not press Quit unless you want to cancel the recording.

The phone replays and saves the recorded tag. The icon appears next to commands

which have voice tags assigned.

Activate a voice command

After you have associated a voice tag with a phone function, you can issue a command

by speaking the voice tag.

1. Press and hold Contacts.

2. When Please speak now appears, pronounce the voice tag clearly into the

microphone.

When the phone finds the voice tag, Found appears, and the phone plays the recognized

voice tag through the earpiece. The function you requested is activated.

Options

After you have associated a voice tag to a command, you can choose one of the

following options:

• Select Playback to listen to the voice command tag.

• Select Change to change the voice command.

• Select Delete to erase the voice command tag.

■Voice recorder

This feature allows you to record pieces of speech or sound with your phone and listen

to them later. The total available time is 30 seconds if no memos have been stored. The

maximum length of a recording depends on how much memory remains available.The

voice recorder cannot be used when a data call connection is active.

Voice (Menu 7)

Record speech or sound

1. At the start screen, select Menu > Voice > Voice recorder > Record.

2. After the recorder start tone is heard, begin recording speech or sound.

3. When you are finished recording, press Stop.

4. Enter the title you wish to assign to the recording, and press OK.

Options

After you have saved the recording to the Recordings list, highlight the recording, and

choose one of the following options:

• Select Playback to listen to the recording using the earpiece.

• Select Delete to erase the recording.

• Select Edit title to rename the recording.

• Select Add alarm to add an alarm to the recording.

12. Minibrowser (Menu 8)

Minibrowser is a network service. See Network services, 6 for more information.

Your phone has a built-in browser you can use to connect to selected services on the

mobile internet. If your wireless service provider supports this feature, then you can

view weather reports, check news or flight times, view financial information, and much

more. The web browser on your phone can display WAP-based content.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia

does not warrant or endorse these sites. If you choose to access them, you should take

the same precautions, for security and content, as you would with any Internet site.

■Mobile internet access

Because mobile internet content is designed to be viewed from your phone, your

wireless provider is now your mobile internet service provider as well.

It is likely that your wireless provider has created a home page and set up your browser

to go to this page when you log on to the mobile internet. Once at your service

provider’s home page, you may find links to a number of other sites.

It should not be necessary to manually configure the browser on your phone. Normally

this is done by your wireless provider once you have subscribed to the feature. Contact

your wireless provider if you have problems using the browser.

The security icon does not indicate that the data transmission between the gateway and

the content server (or place where the requested resouce is stored) is secure. The service

provider secures the data transmission between the gateway and the content server.

■Sign on to the mobile internet

At the start screen, select Menu > Minibrowser > Connect.

After a brief pause, your phone attempts to connect to your wireless provider’s home

page. If you receive an error message, your phone may not be set up for browsing.

Contact your wireless provider to make sure that your phone is configured properly.

Minibrowser (Menu 8)

■Navigate the mobile internet

Since your phone screen is much smaller than a computer screen, mobile Internet

content is displayed differently than you may be accustomed to seeing. This section

contains guidelines for using phone keys to navigate a WAP site.

Phone keys

• To display the Minibrowser home screen, press the Power key.

• To browse the WAP site, scroll up or down.

• To select a highlighted item, press Select.

• To enter letters and numbers, press a key from 0–9.

• To enter special characters, press *.

Receive a call while online

Depending on your wireless service provider, you may still be able to receive a voice call

while using the WAP browser.

• To answer the incoming call, press the Talk key.

• To reject the incoming call, press the End key.

After you end your voice call, the mobile internet connection automatically resumes.

Note: If your wireless service provider does not support incoming calls while

browsing, the incoming calls are automatically diverted to voice mail.

Make an emergency call while online

You can end your data connection and make an emergency call.

1. To close your mobile internet connection, press the End key.

2. Press the End key as many times as needed to clear the display and ready the phone

for calls.

3. Enter the emergency number for your present location (for example, 911).

Emergency numbers vary by location.

4. Press the Talk key.

Clear the cache and disconnect

A cache is a memory location that is used to store data temporarily. If you have tried to

access or have accessed confidential information requiring passwords, empty the cache

after each use. The information or services you accessed is stored in the cache. To empty

the cache while in the browser menu, select Navigate > Advanced > Clear > Cache

from the home page. You can also clear the cache by pressing and holding the Power

key to power off your phone.

To close your mobile internet connection while browsing, press and hold the End key.

Organizer (Menu 9)

13. Organizer (Menu 9)

Your phone contains features to help organize your everyday life, including an alarm

clock, calendar, calculator, countdown timer, and stopwatch.

■Alarm clock

Set an alarm

The alarm clock is based on the phone clock. It sounds an alert any time you specify and

even works if the phone is turned off.

1. At the start screen, select Menu > Organizer > Alarm clock > Alarm time.

2. Enter the time for the alarm (in hh:mm) format, and press OK.

3. Select am or pm (if 12-hour format is selected).

Alarm on appears briefly in the display and appears on the start screen.

Change the time

1. At the start screen, select Menu > Organizer > Alarm clock > Alarm time > On.

2. Enter the time for the alarm (in hh:mm) format, and press OK.

3. Select am or pm (if 12-hour format is selected).

Alarm on appears briefly in the display and appears on the start screen.

Set the alarm tone

You can set which tone is played when the alarm sounds.

1. At the start screen, select Menu > Organizer > Alarm clock > Alarm tone.

2. Highlight Standard, Ringing tone, or Open Gallery to choose the tone of your choice,

and press Select.

Alarm conditions

When the alarm sounds, your phone beeps, vibrates, and the display lights up.

With the phone on, press OK to shut the alarm off, or press Snooze. The alarm stops for

10 minutes and Snooze on appears in the display.

Note: If you do not press a key, the alarm stops (snoozes) for 5 minutes, then

sounds again.

If the alarm time is reached while the phone is switched off, the phone switches itself

on and starts sounding the alarm tone. If you press Stop, the device asks whether you

want to activate the phone for calls. Press No to switch off the device or Yes to make

and receive calls. Do not press Yes when wireless phone use may cause interference or

danger.

Turn an alarm off

At the start screen, select Menu > Organizer > Alarm clock > Alarm time > Off.

■Calendar

The calendar keeps track of reminders, calls you need to make, meetings, and birthdays.

It can even sound an alarm for any of these events.

Monthly view provides an overview of the selected month and weeks. It also allows you

to jump to a specific date. Any days or dates that appear in bold font contain calendar

notes such as a meeting or reminder.

Open

At the start screen, select Menu > Organizer > Calendar.

Note: To open the calendar quickly, scroll right from the start screen. The right

scroll key can perform different functions depending on your network service.

You can move the cursor in some calendar views by using the Four-way scroll key.

Go to a date

1. At the start screen, select Menu > Organizer > Calendar > Options > Go to date.

2. Enter the date (for example, 07/15/2004), and press OK.

Organizer (Menu 9)

Note a specific date

You can choose from five types of notes: Meeting, Call, Birthday, Memo, and Reminder.

Your phone asks for further information depending on which note you choose. You also

have the option to set an alarm for any note that you select.

1. Go to the date for which you want to set a reminder. (See Go to a date, 74 in the

previous section if you need more information.)

2. From the monthly view (with the go to date highlighted), select Options > Make a

note.

3. Select one of the following note types:

Meeting—You are prompted to enter a subject, location, and a start/end time. You

are then given the option to set an alarm.

Call—You are prompted to enter a phone number, a name, and the time. You are

then given the option to set an alarm.

Birthday—You are prompted to enter the person’s name, and year of birth. You are

then given the option to set an alarm.

Memo—You are prompted to enter a subject and an end date and given the option to

set an alarm.

Reminder—You are prompted to enter the subject you wish to be reminded about

and given the option to set an alarm.

4. Enter your note, and select Options > Save.

View notes (day view)

After you have created some calendar notes, you can view them as follows:

1. At the start screen, select Menu > Organizer > Calendar.

2. Scroll to the date containing the note. (Any days containing notes will be in bold

font.)

3. Select Options > View day.

4. To view a highlighted note, select Options > View.

Options while viewing a list of notes

1. Press Options while viewing a day’s notes to display options that are available with

the options listed below while viewing the body of a note or viewing the header of a

note:

View—View the full note.

Make a note—Create a new note for the selected date.

Delete—Delete the note.

Edit—Edit the note.

Move—Move the note to another date on your calendar.

Repeat—Enable the note to recur on a regular basis (daily, weekly, biweekly,

monthly, and yearly).

Go to date—Jump to another date on your calendar.

Send note—Send the note to another device as a text message or in calendar-to-

calendar (vCal) format.

Copy—Copy the note, and paste it to another date.

Settings—Set the date and time, date and time format, the day each week starts and

whether you want your notes to auto-delete after a specified time.

2. Scroll to an option, and press Select to activate it or enter its submenu.

Send a note

1. At the start screen, select Menu > Organizer > Calendar.

2. Scroll to the date containing the note you wish to send. (Any days containing notes

will be in bold font.)

3. Select Options > View day.

4. Scroll to the note you wish to send, and select Options > Send note > Via calendar or

Via text msg.

5. If you selected Via calendar, enter the number for the recipient, or press Search to

retrieve a number from the contacts list, and press OK. The note is sent.

6. If you selected Via text message, the note appears as a text message in the display.

7. Select Add number.

Organizer (Menu 9)

8. Enter the number for the recipient, or press Search to retrieve a number from the

contacts list, and press OK.

9. Select Options > Send.

Receive notes

When you receive a calendar note in calendar-to-calendar (vCal) format, your phone

displays Calendar note received. When you receive a calendar note as a text message, a

message notification appears on the start screen. You can then save the note in your

calendar and set an alarm for any date and time.

View notes

1. When your phone displays Calendar note received, press Show.

2. Scroll to view the entire message, if necessary.

Save notes

After viewing the calendar note, select Options > Save.

Discard notes

After viewing the calendar note, select Options > Discard.

■Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the square

and the square root and converts currency values.

Note: This calculator has a limited accuracy and is designed for simple

calculations.

1. At the start screen, select Menu > Organizer > Calculator.

2. Enter the first number in the calculation. (Press # for a decimal point if necessary.)

To perform a square or square root calculation, select Options > Square or Square

root.

3. Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/)

characters. Pause briefly to select the displayed character.

4. Enter the second number in your calculation.

5. Press Options (equals is highlighted) and Select.

Currency converter

You can convert foreign currency to domestic, or vice versa, directly from the start

screen or from the Calculator menu.

1. At the start screen, enter a currency amount to convert, or select Menu > Organizer

> Calculator and enter a currency amount to convert.

2. Select Options > To home or To foreign.

To home—converts foreign currency to domestic currency.

To foreign—converts domestic currency to foreign currency.

If you have not done so already, you are prompted to enter the exchange rate.

3. Enter the exchange rate (press # to insert a decimal), and press OK.

You can also edit the exchange rate at any time.

Note: When you change base currency, you must key in the new rates because

all previously set exchange rates are set to zero.

1. At the start screen, select Menu > Organizer > Calculator > Options > Exchange rate

> Foreign unit expressed in domestic units or Domestic unit expressed in foreign

units.

Foreign unit expressed in domestic units—the number of home units it takes to make

one unit of foreign currency.

Domestic unit expressed in foreign units—the number of foreign units it takes to

make one unit of your home currency.

2. Enter the exchange rate, and press OK.

■Countdown timer

You can enter a specified time (up to 99 hours and 59 minutes). When the time runs out,

your phone sounds an alarm.

Note: The countdown timer only works when the phone is on. Once you turn off

your phone, the timer is no longer active.

Set the countdown timer

1. At the start screen, select Menu > Organizer > Countdown timer.

2. Enter the time (in hh:mm format), and press OK.

Organizer (Menu 9)

3. Enter a note for the timer, and press OK.

The icon appears on the start screen when the countdown timer is set.

When the time runs out, your phone sounds an alarm, displays the timer note, and

flashes its lights.

• Press any key during the alarm to stop the timer.

• After 30 seconds the timer alert expires automatically.

Change the time

After you have set the timer, you can change the time.

1. At the start screen, select Menu > Organizer > Countdown timer > Change time.

2. Enter the new time, and press OK.

3. Leave the note as it was, or enter a new note, and press OK.

Stop the timer before the alarm sounds

After you have set the timer, you can stop the timer.

At the start screen, select Menu > Organizer > Countdown timer > Stop timer.

■Stopwatch

Your phone has a stopwatch that can be used to track time. The stopwatch displays time

in hours, minutes, seconds and fractions of a second in hh:mm:ss:s format.

Using the stopwatch or allowing it to run in the background when using other features

increases the demand on the battery and reduces the battery life.

Measure time

1. At the start screen, select Menu > Organizer > Stopwatch > Split timing.

2. Press Start to begin split timing. The running time is displayed on the screen.

3. Press Stop to end the timing. The total time is displayed on the screen.

Measure split time

You can use the split time function for such things as a long distance race when you

need to pace yourself.

1. At the start screen, select Menu > Organizer > Stopwatch > Split timing > Start.

2. Press Split to note the lapsed time.

The timer continues to run. The split time appears below the running time. If you

split the time more than once, the new measured time appears at the beginning of

the list. You can scroll to see previous measured times.

3. Press Stop to end the split timing.

Measure lap time

You can use the lap time function when you want to track how long it takes to complete

each cycle or lap.

1. At the start screen, select Menu > Organizer > Stopwatch > Lap timing > Start.

2. Press Lap to note the lap time.

The clock stops, then starts immediately from zero. The lap time appears below the

running time. If you take more than one lap time, the new measured time appears at

the beginning of the list. You can scroll to see previous measured times. When you

press Stop, the total time appears at the top.

Save the lap time

1. While the clock is running, select Stop > Options > Save.

2. Enter a name for the measurement, and press OK.

If you do not enter a name, the total time is used as the default title for the lap time.

Operation note

If you press the End key and return to the start screen, the clock continues to run in the

background and the icon appears in the upper left corner of the screen.

To return to the stopwatch screens:

1. At the start screen, select Menu > Organizer > Stopwatch >Continue.

2. To stop the clock, press Stop.

Options

You can choose the following options when using the stopwatch:

Organizer (Menu 9)

Continue—Shows up when the stopwatch is working in the background.

Show last time—Allows you to view the last measured time.

View times—Allows you to browse the saved times.

Delete times—Allows you to delete any saved times. You can delete the saved times one

by one or all at once.

14. Applications (Menu 10)

Applications is a network service. See Network services, 6 for more information.

If your wireless service provider supports this feature, you will find useful applications

pre-installed on your phone. Also, you can manage and download new applications that

may be offered by your wireless provider.

■Launch

1. At the start screen, select Menu > Applications > Select app.

2. Scroll to an application, and press Options, highlight Open, and press Select or the

Talk key.

Note: An application may require a few seconds to load. When you open an

application, wait for the launch screen to disappear. At that point, the

application is ready.

■Download

You can download new applications in different ways.

Note: Only install applications from sources that offer adequate protection

against harmful software.

Note: When you download a game or an application, it may be saved in the

Games menu instead of the Applications menu.

being copied, modified, transferred or forwarded.

Browser downloads

Browser downloads is a network service. See Network services, 6 for more information.

1. At the start screen, select Menu > Applications > App. downloads.

2. Press Select to access the list of web browser bookmarks.

3. Scroll to the appropriate bookmark that contains the application you wish to

download, and press Select to connect to the web page.

Applications (Menu 10)

If the connection fails, you may enter the Applications menu and activate another

set of service settings.

PC Suite

Nokia PC Suite is a collection of powerful tools that you can use to manage your phone

features and data. Each component is a separate program that includes online helps.

Nokia PC Suite software, installation instructions, and other documentation is provided

free of charge and and can be downloaded from the software downloads of the Nokia

web site: www.nokia.com/us.

Note: Some of the features in your phone require network support. Contact

your service provider for availability and configuration instructions.

■Memory status

You can view the size of memory available for game and application installations. At the

start screen, select Menu > Applications > Memory.

15. Enhancements

Check the model number of any charger before use with this

device. This device is intended for use when supplied with

power from ACP-7 or ACP-12.

Warning: Use only batteries, chargers, and enhancements approved by Nokia

for use with this particular model. The use of any other types may invalidate

any approval or warranty, and may be dangerous. For availability of approved

enhancements, please check with your dealer.

Your device and its enhancements may contain small parts. Keep them out of reach of

small children.

A few practical rules about accessories and enhancements:

• Keep all accessories and enhancements out of the reach of small children.

• When you disconnect the power cord of any accessory or enhancement, grasp and

pull the plug, not the cord.

• Check regularly that enhancements installed in a vehicle are mounted and are

operating properly.

• Installation of any complex car enhancements must be made by qualified personnel

only.

(updated enhancement list from Jeremy)

Power

• Standard 1070 mAh Li-Ion Battery (BL-6C)

• Standard Travel Charger (ACP-7)

• Travel Charger (ACP-12)

• Mobile Charger (LCH-12)

• Retractable Charger (AC-1)

Audio

• Headset (HS-5)

•2.5mm Headset (HS-9)

• Boom Headset (HDB-4)

Enhancements

• Loopset (LPS-4)

• FM Radio Headset (HS-2R)

• Retractable Headset (HS-10)

Data

• Data Cable (DKU-5)

• Desk Stand with Sync (DCV-15)

Car

• Full Car Kit (CK-6)

• Car Installation Kit (CARK-126)

• Mobile Holder (MBC-17)

• Mobile Lighter Charger (LCH-12)

• Headrest Handsfree (BHF-1)

16. Reference information

This section provides information about your phone’s batteries, enhancements,

chargers, safety guidelines and technical information. Be aware that the information in

this section is subject to change as batteries, chargers, and enhancements change.

■Batteries and chargers

Your device is powered by a rechargeable battery. The full performance of a new battery

is achieved only after two or three complete charge and discharge cycles. The battery

can be charged and discharged hundreds of times but it will eventually wear out. When

the talk and standby times are noticeably shorter than normal, buy a new battery. Use

only Nokia approved batteries, and recharge your battery only with Nokia approved

chargers designated for this device.

Unplug the charger from the electrical plug and the device when not in use. Do not

leave the battery connected to a charger after the battery has finished charging.

Overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its

charge over time. Temperature extremes can affect the ability of your battery to charge.

Use the battery only for its intended purpose. Never use any charger or battery that is

damaged.

Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic

object such as a coin, clip, or pen causes direct connection of the positive (+) and

negative (-) terminals of the battery. (These look like metal strips on the battery.) This

might happen, for example, when you carry a spare battery in your pocket or purse.

Short-circuiting the terminals may damage the battery or the connecting object.

Leaving the battery in hot or cold places, such as in a closed car in summer or winter

conditions, will reduce the capacity and lifetime of the battery. Always try to keep the

battery between 59°F and 77°F (15°C and 25°C). A device with a hot or cold battery may

not work temporarily, even when the battery is fully charged. Battery performance is

particularly limited in temperatures well below freezing.

Do not dispose of batteries in a fire! Dispose of batteries according to local regulations.

Please recycle when possible. Do not dispose as household waste.

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated

with care. The suggestions below will help you protect your warranty coverage and

enjoy your device for many years.

• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can

contain minerals that will corrode electronic circuits. If your device does get wet,

remove the battery and allow the device to dry completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic

components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic circuit

boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal circuit

boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the

device.

• Do not paint the device. Paint can clog the moving parts and prevent proper

operation.

• Use only the supplied or an approved replacement antenna. Unauthorized antennas,

modifications, or attachments could damage the device and may violate regulations

governing radio devices.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest authorized

service facility for service.

Additional safety information

■Operating environment

Remember to follow any special regulations in force in any area and always switch off

your device when its use is prohibited or when it may cause interference or danger. Use

the device only in its normal operating positions.

To maintain compliance with radio frequency exposure guidelines only use

enhancements approved by Nokia for use with this device. When the device is on and

being worn on the body, always use an approved carrying case.

■Medical devices

Operation of any radio transmitting equipment, including wireless phones, may

interfere with the functionality of inadequately protected medical devices. Consult a

physician or the manufacturer of the medical device to determine if they are adequately

shielded from external RF energy or if you have any questions. Switch off your phone in

health care facilities when any regulations posted in these areas instruct you to do so.

Hospitals or health care facilities may be using equipment that could be sensitive to

external RF energy.

PACEMAKERS

Pacemaker manufacturers recommend that a minimum separation of 6 inches

(15.3 cm) be maintained between a wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are consistent with the

independent research by and recommendations of Wireless Technology Research. To

minimize the potential for interference, persons with pacemakers should

• Always keep the device more than 6 inches (15.3 cm) from their pacemaker when

the device is switched on

• Not carry the device in a breast pocket

• Hold the device to the ear opposite the pacemaker

If you have any reason to suspect that interference is taking place, switch off your

device immediately.

HEARING AIDs

Some digital wireless devices may interfere with some hearing aids. If interference

occurs, consult your service provider.

Additional safety information

■Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems

in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock)

braking systems, electronic speed control systems, air bag systems. For more

information, check with the manufacturer or its representative of your vehicle or any

equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle.

Faulty installation or service may be dangerous and may invalidate any warranty that

may apply to the device. Check regularly that all wireless device equipment in your

vehicle is mounted and operating properly. Do not store or carry flammable liquids,

gases, or explosive materials in the same compartment as the device, its parts, or

enhancements. For vehicles equipped with an air bag, remember that an air bags inflate

with great force. Do not place objects, including installed or portable wireless

equipment in the area over the air bag or in the air bag deployment area. If in-vehicle

wireless equipment is improperly installed and the air bag inflates, serious injury could

result.

■Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere and

obey all signs and instructions. Potentially explosive atmospheres include areas where

you would normally be advised to turn off your vehicle engine. Sparks in such areas

could cause an explosion or fire resulting in bodily injury or even death. Switch off the

device at refuelling points such as near gas pumps at service stations. Observe

restrictions on the use of radio equipment in fuel depots, storage, and distribution areas,

chemical plants or where blasting operations are in progress. Areas with a potentially

explosive atmosphere are often but not always clearly marked. They include below deck

on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas

(such as propane or butane), and areas where the air contains chemicals or particles

such as grain, dust or metal powders.

FCC regulations prohibit using your wireless device while in the air. The use of wireless

telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the

wireless telephone network, and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone

services to the offender, legal action, or both.

■Emergency calls

Important: Wireless phones, including this phone, operate using radio signals,

wireless networks, landline networks, and user-programmed functions.

Because of this, connections in all conditions cannot be guaranteed. You

should never rely solely on any wireless phone for essential communications

like medical emergencies.

To make an emergency call:

1. If the phone is not on, switch it on. Check for adequate signal strength.

2. Press the End key as many times as needed to clear the display and ready the phone

for calls.

3. Key in the official emergency number for your present location. Emergency numbers

vary by location.

4. Press the Talk key.

If certain features are in use, you may first need to turn those features off before you

can make an emergency call. Consult this guide or your service provider. When making

an emergency call, give all the necessary information as accurately as possible. Your

wireless phone may be the only means of communication at the scene of an accident.

Do not end the call until given permission to do so.

■Certification Information (SAR)

THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO

RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured

not to exceed the emission limits for exposure to radio frequency (RF) energy set by the

Federal Communications Commission of the U.S. Government. These limits are part of

comprehensive guidelines and establish permitted levels of RF energy for the general

population. The guidelines are based on standards that were developed by independent

scientific organizations through periodic and thorough evaluation of scientific studies.

The standards include a substantial safety margin designed to assure the safety of all

persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement

known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.*

Tests for SAR are conducted using standard operating positions accepted by the FCC

with the phone transmitting at its highest certified power level in all tested frequency

bands. Although the SAR is determined at the highest certified power level, the actual

SAR level of the phone while operating can be well below the maximum value. This is

Additional safety information

because the phone is designed to operate at multiple power levels so as to use only the

power required to reach the network. In general, the closer you are to a wireless base

station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certified

to the FCC that it does not exceed the limit established by the government-adopted

requirement for safe exposure. The tests are performed in positions and locations (for

example, at the ear and worn on the body) as required by the FCC for each model. The

following values are the highest SAR values for this model phone as reported to the FCC:

When tested for use at the ear:

Nokia 6011i: 1.25 W/kg

When worn on the body, as described in this user guide:

Nokia 6011i: 0.57 W/kg

(Body-worn measurements differ among phone models, depending upon available

enhancements and FCC requirements).

While there may be differences between the SAR levels of various phones and at various

positions, they all meet the government requirement.

The FCC has granted an Equipment Authorization for this model phone with all reported

SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR

information on this model phone is on file with the FCC and can be found under the

Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID:

QMNRH-58 for the Nokia 6011i

For body worn operation, this phone has been tested and meets the FCC RF exposure

guidelines for use with a carry case, belt clip, or holder that contains no metal and that

positions the handset a minimum of 7/8 inch (2.2 cm) from the body. Use of other carry

cases, belt clips, or holders may not ensure compliance with FCC RF exposure guidelines.

If you do not use a body-worn enhancement and are not holding the phone at the ear,

position the handset a minimum of 7/8 inch (2.2 cm) from your body when the phone is

switched on.

*In the United States and Canada, the SAR limit for mobile phones used by the public is

1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The standard incorporates

a substantial margin of safety to give additional protection for the public and to

account for any variations in measurements. SAR values may vary depending on

national reporting requirements and the network band. For SAR information in other

regions please look under product information at www.nokia.com/us.

■Technical information

Dimensions—Width 1.96 in (49.9 mm); length 4.26 in (108.3 mm); depth 0.91 in

(23.2 mm)

Weight —3.87 oz (109.6 g) with BL-6C Li-Ion Battery

Volume—5.95 cu in (97.5 cu cm)

Frequency range (Tx)—PCS 1851.25–1908.75 MHz

Frequency range (Rx)—PCS 1931.25–1988.75 MHz

■Battery information

This section provides information about battery charging times with the Travel Charger

(ACP-12) and the Standard Travel Charger (ACP-7), talk-times, and standby times. Be

aware that the information in this section is subject to change. For more information,

contact your service provider.

Charging times

The following charging times are approximate with the BL-6C 1070 mAh Li-Ion battery:

Travel Charger (ACP-12): up to 1 hour 45 minutes

Standard Travel Charger (ACP-7): up to 3 hours 45 minutes

Talk and standby times

Operation times are estimates only and depend on signal strength, phone use, network

conditions, features used, battery age and condition (including charging habits),

temperatures to which the battery is exposed, and many other factors.

Talk time: up to 3.7 hours

Standby time: up to 15 days

■Patent information

Manufactured or sold under one or more of the following US patents:

D405445 5491718 5758278 5887250 6025802 6088342 6377813

D406583 5596571 5790957 5887252 6029065 6148209 6414640

D414189 5642377 5793744 5889770 6047071 6154455 6434186

D405784 5699482 5796757 5929813 6055264 6167038 6459689

Additional safety information

Others

D423515 5701392 5802465 5990740 6072787 6205325 6463031

4969192 5708656 5821891 5991627 6076181 6253075 6466173

5440597 5737323 5854978 6005889 6078570 6292474 6480700

5444816 5754976 5859843 6009129 6084471 6332083 6480155

6486835 6496150 6570909 6580771 6587685

4558302 4901307 5056109 5101501 5109390 5265119 RE32580

Appendix A Message from the

CTIA

(Cellular Telecommunications

& Internet Association)

to all users of mobile phones

Reserved.1250 Connecticut Avenue, NW Suite 800, Washington, DC

20036. Phone: (202) 785-0081

Additional safety information

Safety is the most important call you will ever make.

A Guide to Safe and Responsible Wireless Phone Use

Tens of millions of people in the U.S. today take advantage of the unique combination of

convenience, safety and value delivered by the wireless telephone. Quite simply, the

wireless phone gives people the powerful ability to communicate by voice—almost

anywhere, anytime—with the boss, with a client, with the kids, with emergency

personnel or even with the police. Each year, Americans make billions of calls from their

wireless phones, and the numbers are rapidly growing.But an important responsibility

accompanies those benefits, one that every wireless phone user must uphold. When

driving a car, driving is your first responsibility. A wireless phone can be an invaluable

tool, but good judgment must be exercised at all times while driving a motor vehicle—

whether on the phone or not.The basic lessons are ones we all learned as teenagers.

Driving requires alertness, caution and courtesy. It requires a heavy dose of basic

common sense—keep your head up, keep your eyes on the road, check your mirrors

frequently and watch out for other drivers. It requires obeying all traffic signs and

signals and staying within the speed limit. It means using seatbelts and requiring other

passengers to do the same. But with wireless phone use, driving safely means a little

more. This brochure is a call to wireless phone users everywhere to make safety their

first priority when behind the wheel of a car. Wireless telecommunications is keeping us

in touch, simplifying our lives, protecting us in emergencies and providing opportunities

to help others in need. When it comes to the use of wireless phones, safety is your most

important call.

Wireless Phone "Safety Tips"

Below are safety tips to follow while driving and using a wireless phone which should be

easy to remember.

1. Get to know your wireless phone and its features such as speed dial and redial.

Carefully read your instruction manual and learn to take advantage of valuable

features most phones offer, including automatic redial and memory. Also, work to

memorize the phone keypad so you can use the speed dial function without taking

your attention off the road.

2. When available, use a hands-free device. A number of hands-free wireless phone

accessories are readily available today. Whether you choose an installed mounted

device for your wireless phone or a speaker phone accessory, take advantage of

these devices if available to you.

3. Position your wireless phone within easy reach. Make sure you place your wireless

phone within easy reach and where you can grab it without removing your eyes

from the road. If you get an incoming call at an inconvenient time, if possible, let

your voice mail answer it for you.

4. Suspend conversations during hazardous driving conditions or situations. Let the

person you are speaking with know you are driving; if necessary, suspend the call in

heavy traffic or hazardous weather conditions. Rain, sleet, snow and ice can be

hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay

attention to the road.

5. Do not take notes or look up phone numbers while driving. If you are reading an

address book or business card, or writing a "to do" list while driving a car, you are

not watching where you are going. It’s common sense. Don’t get caught in a

dangerous situation because you are reading or writing and not paying attention to

the road or nearby vehicles.

6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving

or before pulling into traffic. Try to plan your calls before you begin your trip or

attempt to coincide your calls with times you may be stopped at a stop sign, red

light or otherwise stationary. But if you need to dial while driving, follow this simple

tip—dial only a few numbers, check the road and your mirrors, then continue.

7. Do not engage in stressful or emotional conversations that may be distracting.

Stressful or emotional conversations and driving do not mix—they are distracting

and even dangerous when you are behind the wheel of a car. Make people you are

talking with aware you are driving and if necessary, suspend conversations which

have the potential to divert your attention from the road.

8. Use your wireless phone to call for help. Your wireless phone is one of the greatest

tools you can own to protect yourself and your family in dangerous situations—with

your phone at your side, help is only three numbers away. Dial 9-1-1 or other local

emergency number in the case of fire, traffic accident, road hazard or medical

emergency. Remember, it is a free call on your wireless phone!

9. Use your wireless phone to help others in emergencies. Your wireless phone provides

you a perfect opportunity to be a "Good Samaritan" in your community. If you see an

auto accident, crime in progress or other serious emergency where lives are in

danger, call 9-1-1 or other local emergency number, as you would want others to do

for you.

10. Call roadside assistance or a special wireless nonemergency assistance number

when necessary. Certain situations you encounter while driving may require

attention, but are not urgent enough to merit a call for emergency services. But you

Additional safety information

still can use your wireless phone to lend a hand. If you see a broken-down vehicle

posing no serious hazard, a broken traffic signal, a minor traffic accident where no

one appears injured or a vehicle you know to be stolen, call roadside assistance or

other special non-emergency wireless number.

Careless, distracted individuals and people driving irresponsibly represent a hazard to

everyone on the road. Since 1984, the Cellular Telecommunications Industry

Association and the wireless industry have conducted educational outreach to inform

wireless phone users of their responsibilities as safe drivers and good citizens. As we

approach a new century, more and more of us will take advantage of the benefits of

wireless telephones. And, as we take to the roads, we all have a responsibility to drive

safely.The wireless industry reminds you to use your phone safely when driving.For more

information, please call 1-888-901-SAFE.

For updates: http://www.wow-com.com/consumer/issues/driving/articles.cfm?ID=85

Appendix B

Message from the FDA

(U.S. Food and Drug

Administration)

to all users of mobile phones.

Additional safety information

Consumer Update on Wireless Phones

U.S. Food and Drug Administration

1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are

associated with using wireless phones. There is no proof, however, that wireless

phones are absolutely safe. Wireless phones emit low levels of radiofrequency

energy (RF) in the microwave range while being used. They also emit very low levels

of RF when in the stand-by mode. Whereas high levels of RF can produce health

effects (by heating tissue), exposure to low level RF that does not produce heating

effects causes no known adverse health effects. Many studies of low level RF

exposures have not found any biological effects. Some studies have suggested that

some biological effects may occur, but such findings have not been confirmed by

additional research. In some cases, other researchers have had difficulty in

reproducing those studies, or in determining the reasons for inconsistent results.

2. What is FDA’s role concerning the safety of wireless phones?

Under the law, FDA does not review the safety of radiation-emitting consumer

products such as wireless phones before they can be sold, as it does with new drugs

or medical devices. However, the agency has authority to take action if wireless

phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to

the user. In such a case, FDA could require the manufacturers of wireless phones to

notify users of the health hazard and to repair, replace or recall the phones so that

the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions, FDA has

urged the wireless phone industry to take a number of steps, including the

following:

• Support needed research into possible biological effects of RF of the type

emitted by wireless phones;

• Design wireless phones in a way that minimizes any RF exposure to the user that

is not necessary for device function; and

• Cooperate in providing users of wireless phones with the best possible

information on possible effects of wireless phone use on human health.

FDA belongs to an interagency working group of the federal agencies that have

responsibility for different aspects of RF safety to ensure coordinated efforts at the

federal level. The following agencies belong to this working group:

• National Institute for Occupational Safety and Health

• Environmental Protection Agency

• Federal Communications Commission

• Occupational Safety and Health Administration

• National Telecommunications and Information Administration

The National Institutes of Health participates in some interagency working group

activities, as well.

FDA shares regulatory responsibilities for wireless phones with the Federal

Communications Commission (FCC). All phones that are sold in the United States

must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA

and other health agencies for safety questions about wireless phones. FCC also

regulates the base stations that the wireless phone networks rely upon. While these

base stations operate at higher power than do the wireless phones themselves, the

RF exposures that people get from these base stations are typically thousands of

times lower than those they can get from wireless phones. Base stations are thus

not the subject of the safety questions discussed in this document.

3. What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held wireless phones with built-in

antennas, often called cell mobile or PCS phones. These types of wireless phones can

expose the user to measurable radiofrequency energy (RF) because of the short

distance between the phone and the user’s head. These RF exposures are limited by

Federal Communications Commission safety guidelines that were developed with

the advice of FDA and other federal health and safety agencies. When the phone is

located at greater distances from the user, the exposure to RF is drastically lower

because a person's RF exposure decreases rapidly with increasing distance from the

source. The so-called cordless phones; which have a base unit connected to the

telephone wiring in a house, typically operate at far lower power levels, and thus

produce RF exposures far below the FCC safety limits.

4. What are the results of the research done already?

The research done thus far has produced conflicting results, and many studies have

suffered from flaws in their research methods. Animal experiments investigating the

Additional safety information

effects of radiofrequency energy (RF) exposures characteristic of wireless phones

have yielded conflicting results that often cannot be repeated in other laboratories.

A few animal studies, however, have suggested that low levels of RF could

accelerate the development of cancer in laboratory animals. However, many of the

studies that showed increased tumor development used animals that had been

genetically engineered or treated with cancer-causing chemicals so as to be

pre-disposed to develop cancer in the absence of RF exposure. Other studies

exposed the animals to RF for up to 22 hours per day. These conditions are not

similar to the conditions under which people use wireless phones, so we don’t know

with certainty what the results of such studies mean for human health.

Three large epidemiology studies have been published since December 2000.

Between them, the studies investigated any possible association between the use of

wireless phones and primary brain cancer, glioma, meningioma, or acoustic

neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of

the studies demonstrated the existence of any harmful health effects from wireless

phone RF exposures. However, none of the studies can answer questions about

long-term exposures, since the average period of phone use in these studies was

around three years.

5. What research is needed to decide whether RF exposure from

wireless phones poses a health risk?

A combination of laboratory studies and epidemiological studies of people actually

using wireless phones would provide some of the data that are needed. Lifetime

animal exposure studies could be completed in a few years. However, very large

numbers of animals would be needed to provide reliable proof of a cancer promoting

effect if one exists. Epidemiological studies can provide data that is directly

applicable to human populations, but 10 or more years follow-up may be needed to

provide answers about some health effects, such as cancer. This is because the

interval between the time of exposure to a cancer-causing agent and the time

tumors develop - if they do - may be many, many years. The interpretation of

epidemiological studies is hampered by difficulties in measuring actual RF exposure

during day-to-day use of wireless phones. Many factors affect this measurement,

such as the angle at which the phone is held, or which model of phone is used.

6. What is FDA doing to find out more about the possible health

effects of wireless phone RF?

FDA is working with the U.S. National Toxicology Program and with groups of

investigators around the world to ensure that high priority animal studies are

conducted to address important questions about the effects of exposure to

radiofrequency energy (RF).

FDA has been a leading participant in the World Health Organization International

Electromagnetic Fields (EMF) Project since its inception in 1996. An influential

result of this work has been the development of a detailed agenda of research needs

that has driven the establishment of new research programs around the world. The

Project has also helped develop a series of public information documents on EMF

issues.

FDA and the Cellular Telecommunications & Internet Association (CTIA) have a

formal Cooperative Research and Development Agreement (CRADA) to do research

on wireless phone safety. FDA provides the scientific oversight, obtaining input from

experts in government, industry, and academic organizations. CTIA-funded research

is conducted through contracts to independent investigators. The initial research

will include both laboratory studies and studies of wireless phone users. The CRADA

will also include a broad assessment of additional research needs in the context of

the latest research developments around the world.

7. How can I find out how much radiofrequency energy exposure I

can get by using my wireless phone?

All phones sold in the United States must comply with Federal Communications

Commission (FCC) guidelines that limit radiofrequency energy (RF) exposures. FCC

established these guidelines in consultation with FDA and the other federal health

and safety agencies. The FCC limit for RF exposure from wireless telephones is set at

a Specific Absorption Rate (SAR) of 1.6 watts per kilogram (1.6 W/kg). The FCC limit

is consistent with the safety standards developed by the Institute of Electrical and

Electronic Engineering (IEEE) and the National Council on Radiation Protection and

Measurement. The exposure limit takes into consideration the body’s ability to

remove heat from the tissues that absorb energy from the wireless phone and is set

well below levels known to have effects.

Manufacturers of wireless phones must report the RF exposure level for each model

of phone to the FCC. The FCC website (http://www.fcc.gov/oet/rfsafety) gives

Additional safety information

directions for locating the FCC identification number on your phone so you can find

your phone’s RF exposure level in the online listing.

8. What has FDA done to measure the radiofrequency energy

coming from wireless phones?

The Institute of Electrical and Electronic Engineers (IEEE) is developing a technical

standard for measuring the radiofrequency energy (RF) exposure from wireless

phones and other wireless handsets with the participation and leadership of FDA

scientists and engineers. The standard, Recommended Practice for Determining the

Spatial-Peak Specific Absorption Rate (SAR) in the Human Body Due to Wireless

Communications Devices: Experimental Techniques, sets forth the first consistent

test methodology for measuring the rate at which RF is deposited in the heads of

wireless phone users. The test method uses a tissue-simulating model of the human

head. Standardized SAR test methodology is expected to greatly improve the

consistency of measurements made at different laboratories on the same phone.

SAR is the measurement of the amount of energy absorbed in tissue, either by the

whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of

matter. This measurement is used to determine whether a wireless phone complies

with safety guidelines.

9. What steps can I take to reduce my exposure to radiofrequency

energy from my wireless phone?

If there is a risk from these products—and at this point we do not know that there

is—it is probably very small. But if you are concerned about avoiding even potential

risks, you can take a few simple steps to minimize your exposure to radiofrequency

energy (RF). Since time is a key factor in how much exposure a person receives,

reducing the amount of time spent using a wireless phone will reduce RF exposure.

If you must conduct extended conversations by wireless phone every day, you could

place more distance between your body and the source of the RF, since the exposure

level drops off dramatically with distance. For example, you could use a headset and

carry the wireless phone away from your body or use a wireless phone connected to

a remote antenna.

Again, the scientific data do not demonstrate that wireless phones are harmful. But

if you are concerned about the RF exposure from these products, you can use

measures like those described above to reduce your RF exposure from wireless

phone use.

10.What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones,

including children and teenagers. If you want to take steps to lower exposure to

radiofrequency energy (RF), the measures described above would apply to children

and teenagers using wireless phones. Reducing the time of wireless phone use and

increasing the distance between the user and the RF source will reduce RF

exposure.Some groups sponsored by other national governments have advised that

children be discouraged from using wireless phones at all. For example, the

government in the United Kingdom distributed leaflets containing such a

recommendation in December 2000. They noted that no evidence exists that using a

wireless phone causes brain tumors or other ill effects. Their recommendation to

limit wireless phone use by children was strictly precautionary; it was not based on

scientific evidence that any health hazard exists.

11.What about wireless phone interference with medical

equipment?

Radiofrequency energy (RF) from wireless phones can interact with some electronic

devices. For this reason, FDA helped develop a detailed test method to measure

electromagnetic interference (EMI) of implanted cardiac pacemakers and

defibrillators from wireless telephones. This test method is now part of a standard

sponsored by the Association for the Advancement of Medical instrumentation

(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and

many other groups, was completed in late 2000. This standard will allow

manufacturers to ensure that cardiac pacemakers and defibrillators are safe from

wireless phone EMI. FDA has tested hearing aids for interference from handheld

wireless phones and helped develop a voluntary standard sponsored by the Institute

of Electrical and Electronic Engineers (IEEE). This standard specifies test methods

and performance requirements for hearing aids and wireless phones so that no

interference occurs when a person uses a compatible phone and a accompanied

hearing aid at the same time. This standard was approved by the IEEE in 2000.FDA

continues to monitor the use of wireless phones for possible interactions with other

medical devices. Should harmful interference be found to occur, FDA will conduct

testing to assess the interference and work to resolve the problem.

12.Where can I find additional information?

For additional information, please refer to the following resources:

Additional safety information

• FDA web page on wireless phones

http://www.fda.gov/cdrh/phones/index.html

• Federal Communications Commission (FCC) RF Safety Program

http://www.fcc.gov/oet/rfsafety

• International Commission on Non-Ionizing Radiation Protection

http://www.icnirp.de

• World Health Organization (WHO) International EMF Project

http://www.who.int/emf

• National Radiological Protection Board (UK)

http://www.nrpb.org.uk/

July 18, 2001For updates: http://www.fda.gov/cdrh/phones

Microsoft RH-58 Single-Band PCS Phone User Manual 6011i FCCDraft

Microsoft Mobile Oy Single-Band PCS Phone 6011i FCCDraft

Manual

Navigation menu

Namespaces

Views

Navigation