Microsoft RH-71 Tri-mode Dual Band Analog/PCS Phone User Manual Bravo R210 Verizon 060105

Microsoft Mobile Oy Tri-mode Dual Band Analog/PCS Phone Bravo R210 Verizon 060105

UserManual.wiki >

Microsoft >

RH-71 User Manual >

Manual 3

2LEGAL INFORMATIONPart No.9240270, Issue No. 1Copyright ©2005 Nokia. All rights reserved.Nokia, Nokia Connecting People, Nokia 2128i, Xpress-on, Pop-Port, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.Printed in Canada 2005US Patent No. 5818437 and other pending patents. T9 text input software Copyright ©1999-2005. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security. Java is a trademark of Sun Microsystems, Inc.The information contained in this user guide was written for the Nokia 2128i product. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLS This device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICE Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Table of Contents3Table of ContentsFor your safety 41.Phone at a glance 92.Set up your phone 133.Text entry 214.Contacts list 245.Messages 316.Call log 427.Profiles 468.Settings 479.Gallery 6510.Games 6611.Voice 6712.Minibrowser 7013.Organizer 7314.Applications 8115.PC Connectivity 8216.Enhancements 8417.Battery information 86Care and maintenance 89Additional safety information 91

For your safety4For your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELYDo not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRSTObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCEAll wireless phones may be susceptible to interference, which could affect performance. SWITCH OFF IN HOSPITALSFollow any restrictions. Switch the phone off near medical equipment.SWITCH OFF IN AIRCRAFTFollow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELINGDo not use the phone at a refueling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTINGFollow any restrictions. Do not use the phone where blasting is in progress.USE SENSIBLYUse only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.QUALIFIED SERVICEOnly qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIESUse only approved enhancements and batteries. Do not connect incompatible products.

For your safety5WATER-RESISTANCEYour phone is not water-resistant. Keep it dry.BACKUP COPIESRemember to make back-up copies or keep a written record of all important information stored in your phone.CONNECTING TO OTHER DEVICESWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products. EMERGENCY CALLSEnsure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.nAbout your deviceThe wireless phone described in this guide is approved for use on the CDMA 800 and CDMA 1900 networks. Contact your service provider for more information about networks.When using the features in this device, obey all laws and respect privacy and legitimate rights of others.Warning: To use any features in this device, other than the alarm clock, the phone must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.nNetwork servicesTo use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services. Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include

For your safety6changes in menu names, menu order and icons. Contact your service provider for more information.nShared memoryThe following features in this device may share memory: contacts, TXT messages, images, and tones in Gallery, calendar notes, games, and applications. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. Your phone may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as images, tones in Gallery, TXT messages, and applications may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

Welcome7WelcomeCongratulations on your purchase of the Nokia 2128i mobile phone. Your phone provides many functions that are practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar. Your phone can also connect to a PC, laptop, or other device using a data cable. To personalize your phone, you can set your favorite ring tones or select an Xpress-onTM color cover.nGet helpFind your phone labelIf you need help, Nokia Customer Care is available for assistance. Before calling, we recommend that you write down the following information and have it available:• Electronic serial number (ESN)• Your zip codeThe ESN is found on the type label, which is located beneath the battery on the back of the phone. See "Remove the back cover," p. 15 and "Remove the battery," p. 15.Contact NokiaPlease have your product with you when contacting either of the numbers below:Nokia Customer Care Center, USANokia Inc.4630 Woodland Corporate Boulevard, Suite #160Tampa, Florida 33614Tel: 1-888-NOKIA-2U (1-888-665-4228)Fax: 1-813-249-9619TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)Customer Care Center, CanadaNokia Products Ltd.601 Westney Road South

Welcome8Ajax, Ontario L1S 4N7Tel: 1-888-22-NOKIA (1-888-226-6542)Fax: 1-905-427-1070UpdatesFrom time to time, Nokia updates this guide to reflect changes. The latest version and an interactive tutorial for this product may be available at the web site www.nokiausa.com.Accessibility solutionsNokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit the web site at www.nokiaaccessibility.com.

Phone at a glance91. Phone at a glance•Power key and flashlight (1)•Earpiece (2)•Right selection key (3)•End key (4)•Keypad (5)•Connection port (6)•Microphone (7)•Charger port (8)•Scroll up and down key (9)•Call key (10)•Left selection key (11)•Display screen (12)nThe start screenDepending on your wireless service provider and the model number of your device, some or all of the following selection keys may appear on the start screen.

Phone at a glance132. Enter the lock code, and select OK. See "Security settings," p. 54.Note: Depending on your wireless service provider, your device may ask you for the security code (defaulted to 12345) instead of the lock code.

Set up your phone142. Set up your phonenAntennaYour phone has an internal antenna that is located toward the top of the phone.In the Nokia 2128i phone, the GPS antenna is internal and is activated when you place emergency calls or when Location on is selected from the Location info sharing menu. See "Location information sharing," p. 44. Hold the phone as you would any other telephone with the antenna area pointed up and over your shoulder.Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the device to operate at a higher power level than otherwise needed. Avoiding contact with the antenna while operating the device optimizes the antenna performance and the battery life.nChange the batteryAlways switch the device off, and disconnect the charger before removing the battery.Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty, and may be dangerous.

Set up your phone15Check the model number of any charger before use with this device. This device is intended for use when supplied with power from the AC-1, ACP-7 and ACP-12 chargers.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.Note: Always switch off the power and disconnect the charger and any other device before removing the cover. Avoid touching electronic components while changing the cover. Always store and use the device with the cover attached.Remove the back cover1. With the back of the phone facing you, push down on the back cover release button.2. Slide the back cover toward the bottom of the phone and remove.Remove the batteryAfter you have removed the back cover, insert your finger into the finger grip, and lift the battery from its compartment.

Set up your phone16Replace the battery1. Position the battery so the positive and negative indicators on the battery match up with the positive and negative indicators on the phone.The battery label should face away from the phone.2. Insert the battery, gold-colored contact end first, into the battery slot.3. Push down on the other end of the battery to snap it into place.Replace the back coverSlide the back cover toward the top of the phone until the back cover is securely in place.Charge the battery1. Plug the charger into a standard ac outlet.2. Insert the charger output plug into the round jack at the bottom end of the phone.After a few seconds, the battery indicator on the display starts to scroll from bottom to top. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

Set up your phone17nTurn your phone on or off1. To turn your phone on or off, press and hold the power key on top of the phone for at least 3 seconds.2. Enter the lock code. if necessary, and select OK. See "Security settings," p. 54.nConnect the headsetA compatible headset, such as HS-5, may be purchased with your phone or separately as an enhancement. See "Enhancements," p. 73.Important: The headset may affect your ability to hear sounds around you. Do not use this headset in situations that may endanger your safety.Warning: When using the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety.1. Plug the headset connector into the Pop-Port™ connector at the bottom end of your phone. appears in the standby mode.2. Position the headset on your ear.With the headset connected, make, answer, and end calls as usual.• Use the keypad to enter numbers.• Press the call key to place a call.• Press the end key to end a call.nChange the Xpress-on™ coversNote: Always switch off the power, and disconnect the charger and any other device, Before removing the cover. Do not touch electronic components while changing the covers. Always store and use the device with the covers attached.

Set up your phone18To change the Xpress-on covers, first remove the back cover and battery.Remove the front coverGently pull the bottom of the front cover away from the rest of the phone.Install the keymat and front cover1. Remove the keymat from the old front cover.2. Place the keymat into the new front cover.

Set up your phone193. Press the front cover and keymat against the phone, and snap the front cover into place.4. Replace the battery and back cover.nMake a callUse the keypad1. Enter the phone number (including the area code), and press the call key. To delete a character to the left of the cursor, select Clear.2. Press the end key to end the call, or select End call to cancel the call attempt.Use the contacts list1. In the standby mode, scroll down to the entry you wish to view.2. Press the call key to make the call, or select Details to view details of the entry.Use the last dialed number1. In the standby mode, press the call key to display the last 20 numbers dialed. 2. Scroll to the number (or name) you wish to redial, and press the call key.Conference callsConference calling is a network service that allows you to take part in a conference call with two other participants.1. Make a call to the first participant.2. With the first participant on the line, select Options > New call.3. Enter the phone number of the second participant, or select Search to retrieve a number from the contacts list. 4. Select Flash and the first participant is put on hold.

Set up your phone205. When the second participant answers, press the call key to connect the calls.6. To end the conference call, press the end key.nAnswer callsAnswer, silence, or decline an incoming callSilence and Decline are carrier dependent features.1. Press the call or Answer key to answer the call.2. To mute the ringing tone, select Silence. If you do not answer the call, the call is forwarded to voicemail.3. To dismiss and forward the call to voicemail (a carrier dependent feature), select Decline after you have muted the ringing tone, or press the end key at any time.Answer a call with the keypad lockedTo answer a call with the keypad locked, press the call key. During the call, all features function normally. When you end, silence or decline the call, the keypad automatically relocks. See "Keyguard," p. 21.When the keyguard is on, calls still may be possible to the official emergency number programed into your device. Adjust the earpiece volumeWhile in a call, scroll up or down to adjust the volume of the earpiece.When you adjust the volume, a bar chart appears in the display to indicate the volume level.Use the loudspeakerYou can use your phone as a loudspeaker during a call.• To activate the loudspeaker, select Loudspeaker.• To deactivate the loudspeaker during a call, select Handset.The loudspeaker is deactivated automatically when a call (or a call attempt) ends, or when certain enhancements are connected.

Set up your phone21Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Options during a callMany of the options that used during a call are network services. Check with your wireless service provider for more information.1. Select Options to display the following:Mute or Unmute—Silence your end of the call.Loudsp. or Handset—Activate or deactivate the loudspeaker while in a call.New call—Initiate a conference call. See "Conference calls," p. 19.Save—Save the number you entered during a call.Add to contact—Save the number you entered during a call to a contact that is already in the contacts list.End all calls—Disconnect from all active calls.Touch tones—Enter the numbers, and select Tones to send the numbers as tones.Contacts—View the contacts list.Menu—View the phone menu.2. Scroll to and select an option to activate the option or enter its submenu.nKeyguardUse keyguard, to lock the keypad and prevent keys from being pressed accidentally. Remember to lock your phone keypad to prevent accidental calls. If the keypad is locked, it unlocks when you receive a call. After the call, the lock automatically reactivates.When the keyguard is on, calls still may be possible to the official emergency number programed into your phone. Enter the emergency number and press the call key. See "Automatic keyguard," p. 47.Lock the keypadSelect Menu; then press * within 2 seconds.

Set up your phone22Unlock the keypadSelect Unlock; then press * within 2 seconds.

Text entry233. Text entryYou can use two methods for entering text and numbers: standard mode and predictive text mode.• Select Clear to backspace the cursor and delete a character.• Select and hold Clear to backspace continuously and delete characters.nStandard modeStandard mode is the only way to enter text into the contacts list and to rename caller groups.Text (Abc)Press a key once to insert the first letter on the key and twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your device awaits the next entry.•Press 0 to enter a space and accept a completed word.•Press 1 to insert a period into your message.•Press and hold * to display a complete list of special characters.•Press and hold # to switch between letters and numbers.Numbers (123)To switch from Abc mode to 123 mode, press and hold # at any message entry screen.Punctuation and special charactersWhile at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Press * again to cycle through all available characters. To navigate through the list of special characters, use the scroll keys. Once a character is highlighted, select Insert to insert the character into your message.

Text entry24nPredictive text modeTo write messages quickly, use predictive text mode with your keypad and the built-in dictionary. Predictive text mode is much faster than the standard mode method because you do not need to scroll through the letters on each key to spell a word. The dictionary determines which word to enter based on the keys selected.Activate or deactivateAt any text entry screen, select Options > Predictive text > English, Français, or Español to activate predictive text; or select Prediction off to deactivate predictive text.Text entryThe illustration below simulates your display each time a key is pressed. For example, to write ’Nokia’ with predictive text on and the English dictionary selected, press each of the following keys: 6 6 5 4 2 • Press 0 to enter a space, and begin writing the next word.• If a displayed word is not correct, press * to see other matches. To return to the previous word in the list of matches, select Previous.•If ? appears after a word, select Spell to enter the word with the standard mode, and add the word to the dictionary.• Press 1 to insert a period into your message.• Press and hold * to display special characters. Press * again to cycle through all available characters.nChange case and modePress # to switch between uppercase, lowercase, and sentence case text; and between standard and predictive text mode. Case and mode are indicated by the icons that appear in the upper left of the display screen, as follows: Uppercase text: standard mode is on.

Text entry25 Lowercase text: standard mode is on. Sentence case text: standard mode is on. This option is available onlyat the beginning of a sentence. Uppercase text: predictive text is on. Lowercase text: predictive text is on. Sentence case text: predictive text is on. This option is available only at the beginning of a sentence.

Contacts list264. Contacts list The contacts list can hold up to 500 contacts with multiple numbers and text notes for each contact. The amount of numbers and text entries that you can save may vary, depending on length and the total number of entries in the contacts list.nSearchIn the standby mode, select Contacts > Search; highlight the contact you wish to view, and select Details.nAdd new contactsSave a name and number1. In the standby mode, enter the phone number you wish to save.2. Select Options > Save.3. Enter the contact name, and select OK.Save (only) a numberIn the standby mode, enter the phone number you wish to save; select and hold Options.Save multiple numbers and text itemsThe first number you save for any entry is automatically set as the default. The default setting can be changed later. To save different types of phone numbers and short text items per name to the phone memory, do the following:1. In the standby mode, scroll down to display a list of entries. Scroll to the entry to which to add a phone number or text item.2. Select Details > Options > Add number or Add detail.3. Enter the number or text for the type you have selected, and select OK.4. To change the type (E-mail, Web address, Street addr.), select Change type in the options list.

Contacts list28Set up 1-touch dialingYou can associate any entry in the contacts list with a key from 2–9; then dial those entries by pressing and holding the assigned key. See "1-touch dialing," p. 45 to activate or deactivate 1-touch dialing.Assign a key to 1-touch dialing1. In the standby mode, select Contacts > 1-touch dialing.If 1-touch dialing is off, the phone displays a prompt asking if you would like to turn 1-touch dialing on. Select Yes to activate 1-touch dialing2. Scroll to an (empty) 1-touch dialing slot, and select Assign.3. Enter the number (including the area code) and a name for the contact, or select Search to retrieve a number from the contacts list. 4. Select OK. Change 1-touch dialing numbers1. In the standby mode, select Contacts > 1-touch dialing.2. Scroll to the 1-touch dialing entry you wish to change, and select Options > Change.3. Enter the new number; or search to retrieve a number from the contacts list, and select OK.4. Enter a name for the entry, and select OK. Delete 1-touch dialing numbers1. In the standby mode, select Contacts > 1-touch dialing.2. Scroll to the 1-touch dialing location you wish to delete, and select Options > Delete > OK.nEdit contacts list entries1. In the standby mode, scroll down to display your contacts list.2. Scroll to the entry to edit; select Details and one of the following options:Add voice tag or Voice tag—Add a new voice tag or Playback, Change, or Delete an existing voice tag.Edit number—Edit an existing contact number.Delete number—Delete a phone number from the contact.

Contacts list29Use number—Display the phone number in the standby mode, ready to be called.View—View the details of the contact.Change type—Change the number type to General, Mobile, Home, Work, or Fax or the detail type to E-mail, Web address, Street addr., or NoteAs primary no.—Change the default number of the contact.Add number—Add a number to the contact.Add detail—Add an address or note to the contact.Caller groups—Add the contact to an existing caller group.Custom tone—Add a custom ringing tone to the contact.Send bus. card—Send the contact as a business card to another phone.Send message—Create and send a message to the contact.1-touch dialing—Add the contact to your speed dial list.Edit name—Edit the name of the contact.View name—View the name of the contact.Delete—Delete the entire contact entry from your contacts list.Edit phone numberHighlight the phone number to edit, and select Options.E-mail address entryHighlight the e-mail address entry to send or update, and select Options and one of the following:Send e-mail—Send an e-mail.Edit detail—Edit e-mail details.Delete detail—Delete e-mail.View—View the details of the e-mail contact.Change type—Change the e-mail type to E-mail, Web address, Street addr., or Note.Add detail—Add an E-mail, Web address, Street addr., or Note to the entry.Add number—Add a number to the entry.

Contacts list30Caller groups—Add the e-mail to an existing caller group.Custom tone—Add a custom ringing tone to the contact.Send bus. card—Send the contact a business card.Edit name—Edit the name of the contact.View name—View the name of the contact.Delete—Delete the entire e-mail entry from your contacts list.Edit web address1. Highlight the web address entry to edit, and select Options.2. Select Web address, Street addr., or Note > OK.nDelete contacts list entriesIn the standby mode, select Contacts > Delete.• To delete individual entries, select One by one, and scroll to the entry you wish to delete. Select Delete > OK to confirm.• To delete the entire contents of your contacts list, select Delete all > OK. Select OK to confirm or Back to return to Contacts. If OK, enter the security code, and select OK. See "Security settings," p. 54.nView the contacts list1. In the standby mode, select Contacts and one of the following options:Search—Find a name or select from a list.Add new—Add a contact to your contacts list.Edit name—Edit an existing name.Delete—Delete a name and its associated numbers.Add number—Add a number to an existing name.Settings—Change the contacts list view, check the memory status of your phone.1-touch dialing—View or modify the list of 1-touch dialing numbers.Voice tags—Attach, listen to, or modify a contact voice tag.Own number—View your own phone number.

Contacts list31Caller groups—View and edit the properties for any of the caller groups: Family, VIP, Friends, Business, or Other.2. Scroll to and select an item to activate the feature or enter its submenu.Fast search for a name1. In the standby mode, scroll down to display the contents of your contacts list.2. Press the key that corresponds to the first letter of the name for which you are performing a search.3. Scroll up and down to highlight a contact, and select Details to view the details.Configure settingsYou can choose how the contacts appear in your contacts list and view the amount of memory used or available in your phone.For more information on used and available memory, see "Shared memory," p. 6.In the standby mode, select Contacts > Settings, and one of the following options:Scrolling view—Choose how names and numbers stored in the contacts list are viewed. Select Name list or Name and no.Memory status—View the amount of memory used in phone book.nSend and receive contactsTo send and receive an entry in your contacts list, use text messaging, if supported by your wireless provider.Send a business cardTo send a business card as a TXT message to a compatible phone or other handheld device, do the following:1. Highlight the entry from the contacts list and select Details > Options > Send bus. card > Via text msg., and one of the following:• Select Primary no. or All details, if the entry has more than one number or detail.• Enter the number for your recipient.

Contacts list32• Select Search to retrieve a number from your contacts list.2. Select OK , to send the business card.

Messages343. Repeat step 2 to add more recipients, and select OK.4. Select Options > Edit message.5. Compose a message and select Options > Send.Messaging optionsWhen you create or reply to a TXT message, depending on the mode of text input you use and the features supported by your wireless service provider, some or all of the following options are available:Send—Send the message to recipient.List recipients—Send the message to more than one recipient; or delete or edit the recipient list.Save message—Save the message to a folder. Select Sent items, Templates, and Archive.Clear text—Erase the text clipboard.Exit editor—Save the message to your Sent items folder automatically, and exit the message editor.Insert contact—Insert a name from your contacts list into your message.Insert number—Insert a phone number or find a phone number in the contacts list, to insert into your message.Use template—Insert a predefined template into your message.Insert smiley—Insert a smiley into your messageNote: If a picture is inserted, you will be given the additional options to Preview, Change picture, and Delete picture. A picture message cannot be sent to an e-mail address.Insert word or Edit word—Enter or edit the text of a new word that might not appear in the predictive text dictionary. This displays only when the Predictive text is on.Insert symbol—Insert a special character into your message. This displays only when the Predictive text is on.Predictive text—Choose a predictive text language, and turn the dictionary on or off.Matches—View matches found in the dictionary for the word you want to use.

Messages35Distribution listThe distribution list allows you to send messages to a group of contacts. In the standby mode, select Menu > Messages > Text messages > Distribution lists.To create a distribution list, select Options > Add list. To populate your list, select Add contact and a contact from your contacts list.To view, rename or modify a distribution list, highlight the distribution list, and select Options > View list, Rename list, Clear list, or Delete list.TemplatesTemplates are short, prewritten messages that can be recalled and inserted into new TXT messages.1. Open the blank message creation screen. See "Write and send," p. 33.2. Select Options > Use template.3. Scroll to and select one of the available templates.4. Enter the text into your new message, and select Options > Send.Read messagesImportant: Exercise caution when opening messages. Messages may contain malicious software or otherwise be harmful to your device or PC.When you receive a TXT message, a notification message and are displayed in the upper left corner in the standby mode. When you have unopened messages in your Inbox, is displayed.1. Select Show to read the message or Exit to remove the notification icon.Scroll to view the whole message, if necessary. 2. Select Options > Reply.3. Select Empty screen, and compose your reply.4. To send your reply, select Options > Send. OptionsWhen you read a TXT message, some or all of the following options are available, depending on the text input mode and the features supported by your wireless service provider:Delete—Discard the message.

Messages36Reply—Reply to the message. Create the message, and select Options >Send.Use number—Choose Save, Add to contact, Send message, or Call.Save—Save the message to a folder.Use web link—Activate web link (appears when message contains a URL).Save address—Save e-mail address (appears when the message contains an e-mail address).List objects—Display a selection list that includes sounds, pictures, animations, vCard, and vCalendar objects embedded in message.Forward—Forward the message to another phone number.Rename—Edit the title of the message.nMessage foldersSave messagesTo save drafts of messages or received messages to a folder, do the following:1. Open the message or create a new message, and select Options.2. Select Save or Save message > Sent items, Templates, Archive, or a folder you created.View saved messages1. In the standby mode, select Menu > Messages > Text messages.2. Select the folder containing the message you wish to view:Inbox—Stores read and unread messages.Sent items—Stores messages sent automatically from your phone.Archive—Stores messages you have saved.Templates—Stores pictures and prewritten templates.My folders—Provides a place to organize your messages in custom folders. Select Options > Add folder or Options > Rename folder or Delete folder to change a folder.3. Once the folder opens, scroll to and select the message to view.

Messages37nDelete messagesIf your message memory is full, Message overwriting is set to off and you have more messages waiting at the network, when No space for new messages appears in the standby mode:• Read some of the messages, and delete them.• Delete messages from your folders.Delete a single message1. In the standby mode, select Menu > Messages > Text messages.2. Scroll to and select the message to delete.3. Select Options > Delete > OK. Select Back to exitDelete all messages in a folder1. In the standby mode, select Menu > Messages > Text messages > Delete messages.2. Scroll to the folder containing the messages to delete, and Select one of the following options: All—Deletes all messages in all foldersAll read—Deletes any messages which have been read in all foldersAll unread—Deletes any messages which have not been read in all foldersInbox—Deletes all messages from the Inbox folderSent items—Deletes all messages from the Sent items folderArchive—Deletes all messages from the Archive folder and all user created foldersUser defined folders—Displays all user defined folders that the user added under My folders after the predefined folders.3. Select OK to empty the folder.

Messages38Delete foldersOnly folders created in My folders can be deleted. The Inbox, Sent items, Archive, and Templates folders are protected. When a folder is deleted, all messages in the folder are also deleted. nMessage settingsChange sending optionsNote: Some or all of the following Sending options may be available as determined by your carrier.In the standby mode, select Menu > Messages > Text messages > Message settings > Sending options, and select the setting you wish to change.•Priority—Sets the priority of the note to Normal or Urgent.•Delivery note—Receives a note confirming delivery of the message. Select On or Off.•Send callback number—Sends a callback number to the recipient. Select Off or enter your phone number.Change message settingsIn the standby mode, select Menu > Messages > Text messages > Message settings > Other settings, and one of the following options:Message font size—Select Small font or Large font.Message overwriting—Select Sent items only, Inbox only, S. items & inbox, or Off. Save to Sent i-tems as sending—Select Always save, Always prompt, or Off.When the message memory is full, your phone cannot send or receive any new messages. However, you can set your phone to automatically overwrite selected messages in the Inbox or Sent items folders when new messages arrive.nAutomate voice mailSpecial characters, called dialing codes, can be added to phone numbers. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string. See "Insert dialing codes," p. 39.

Messages39Voice mail services vary by service provider. The following instructions are examples of common operations. Please check with your service provider for specific instructions for using your voice mail service.Set up voice mail with dialing codes1. Write down your voice mailbox number.2. Call and check your voice mail as you normally would.3. Write down your interaction with the recorded prompts step-by-step. Keep in mind that each voice mail service may vary. However, it should be similar to the following:Dial *86, pause 5 seconds, enter password (such as, 1234), press #. 4. In the standby mode, select Contacts > 1-touch dialing.5. Scroll to an (empty) 1-touch dialing slot and select Assign.6. Enter your voice mailbox number, including the area code.7. Enter any dialing codes as necessary using the information that you wrote down from "Insert dialing codes," p. 39.If you pause for 5 seconds after connecting to voice mail, enter p twice after the voice mailbox number; for example, 2145551212pp.8. Enter any remaining pauses or other information that allows you to listen to your messages, and select OK.9. Enter a name (such as voice mail), and select OK.To dial and listen to your voice mail, in the standby mode, press and hold the assigned 1-touch dialing key.Insert dialing codesPress * repeatedly to cycle through the dialing codes. Once the desired code appears in the display, pause briefly. The code is inserted into the dialing string.The following dialing codes are available: * — Bypasses a set of instructions+— International prefixp— Pauses for 2.5 seconds before sending the numbers that follow

Messages40w— Waits for you to press the call key before sending the numbers or codes that follow

Call log416. Call logCall log stores information about the last 20 missed, 20 received, and 20 dialed calls. It also stores the duration of all calls. When the number of calls exceeds the maximum, the most recent call replaces the oldest.To view information for Missed calls, Received calls, or Dialed numbers, choose from the following options:Call time—Displays the date and time of the callSend message—Sends a message to the numberView number—Displays the numberUse number—Edits the number and associates a name with the numberSave—Enters a name for the number and saves it to your contacts listAdd to contact—Adds the number to an existing entry in your contacts list, if the number is not associated with a nameDelete—Clears the number from memoryCall—Calls the numbernView missed callsMissed calls were never answered. The missed calls feature does not function when your phone is switched off.If the message icon appears in the display, select List and highlight the missed call. Select Options.Or, from the standby mode, select Menu > Call log > Missed calls . Highlight a missed call and select Options.nView received callsReceived calls have been answered. In the standby mode, select Menu > Call log > Received calls. Highlight a received call and select Options.nView dialed numbersDialed numbers were dialed previously from your phone. In the standby mode, press the call key, or select Menu > Call log > Dialed numbers. Highlight a name or number and select Options.

Call log42Call timesTo view up to five calls with the time each call occurred, your phone clock must be set.1. Select Options > Call time.2. Scroll through the calls to view the recent call times.3. Select Back to return to the options list.nDelete call logsTo delete any missed, dialed, or received calls from phone memory, in the standby mode, select Menu > Call log > Delete recent call lists and select the call type to clear: All, Missed, Received or Dialed.nView duration of callsNote: The actual invoice for calls and services from your service provider may vary depending on network features, rounding off for billing, taxes, and so forth.To activate the call timer, in the standby mode and while in a call, select Details > Show call time on display > On or Off. Note: Some timers, including the life timer, may be reset during service or software upgrades.To determine the duration of your calls, select Menu > Call log > Call timers, and Duration of last call, Duration of dialed calls (Home or Roaming), Duration of received calls (Home or Roaming), Duration of all calls, Life timer, Clear timersClear timers sets all call timers, except the life timer, to zero. Enter your security code, and OK. See "Security settings," p. 54.

Settings45In the standby mode, select Menu > Settings > Call settings > Anykey answer > On or Off.Automatic redialOccasionally, your network may experience heavy traffic, which results in a fast busy signal when you dial. With automatic redial activated, your phone redials the number (number of times is specified by the network), and notifies you once the network is available.In the standby mode, select Menu > Settings > Call settings > Automatic redial > On or Off.1-touch dialingTo activate or deactivate 1-touch dialing. In the standby mode, select Menu > Settings > Call settings > 1-touch dialing > On or Off. See "Set up 1-touch dialing," p. 28.Automatic update of serviceYour phone can receive updates to wireless services sent to your phone by your service provider. This option is a network service.In the standby mode, select Menu > Settings > Call settings > Auto-update of service > On or Off.Calling cardsIf you use a calling card for long distance calls, save the calling card number in your phone. The phone can store up to four calling cards. Contact your calling card company for more information.Save information1. In the standby mode, select Menu > Settings > Call settings > Calling card.2. Enter your security code, and select OK. See "Security settings," p. 54.3. Scroll to one of the four card memory locations, and select Options > Edit > Dialing sequence.4. Select one of the following sequence types:Access no. + phone no. + card no.—Dial the 1-800 access number, phone number, then enter the card number (plus PIN if required).

Settings46Access no. + card no. + phone no.—Dial the 1-800 access number, card number (plus PIN if required), then enter the phone number.Prefix + phone no. + card no.—Dial the prefix (numbers that must precede the phone number) and phone number, then enter the card number (plus PIN if required).5. Enter the required information (access number or prefix and card number), and select OK to confirm your entries.6. Select Card name > enter the card name > OK.Make callsAfter you have saved your calling card information in your phone, make a call with your calling card.1. In the standby mode, select Menu > Settings > Call settings > Calling card. 2. Enter your security code, and select OK. See "Security settings," p. 54.3. Scroll to the calling card of your choice, select Options > Select > OK.4. Press the end key to return to the standby mode and enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.5. Press and hold the call key for a few seconds until Card call is displayed.6. When you hear the tone or system message, select OK.International prefixTo store an international dialing prefix into your phone, enter + at the beginning of a phone number. Your phone automatically inserts the international dialing prefix that you stored.1. In the standby mode, select Menu > Settings > Call settings > International prefix. 2. Enter the international dialing prefix (for example, 0011), and select OK.3. In the standby mode, enter + (press * key twice) and the phone number to call (for example, +3546789).The phone calls the international dialing prefix you have stored in your phone and the phone number you have entered (for example, the phone calls 0011354789).

Settings47Call summaryYour phone can display the time spent on a call when you hang up.In the standby mode, select Menu > Settings > Call settings > Call summary > On or Off.nPhone settingsPhone languageIn the standby mode, select Menu > Settings > Phone settings > Phone language, and select the language: English or Español.The phone language you choose affects the time and date formats of the clock, alarm clock, and calendar.Automatic keyguardTo set the keypad of your phone to lock automatically after a preset time delay (from 10 seconds to 60 minutes), do the following:1. In the standby mode, select Menu > Settings > Phone settings > Automatic keyguard > On or Off. 2. If you select On, Set delay: is displayed. 3. Enter the delay (in minutes and seconds), and select OK.Important: When keyguard is on, calls may be possible to the emergency number programed into your phone. Enter the emergency number, and press the call key. The number is displayed only after you enter the last digit.Touch tonesTouch tones sound when you press the keys on your phone keypad. You can use touch tones for many automated dial-up services such as banking and airlines, or for entering your voice mailbox number and password. Touch tones are sent during an active call and can be sent manually from your phone keypad, or sent automatically by saving them in your phone.Set type1. In the standby mode, select Menu > Settings > Phone settings > Touch tones > Manual touch tones.

Settings482. Select one of the following options:Continuous—Sets tone sounds for as long as you press and hold a keyFixed—Sends tones of the duration you specify in the Touch tone length optionOff—Turns off tones. No tones are sent when you press a key.Set length To specify touch tone length when using the Fixed option, in the standby mode, select Menu > Settings > Phone settings > Touch tones > Touch tone length > Short (0.1 seconds) or Long (0.5 seconds).Welcome noteYou can write a welcome note that briefly appears on the display screen whenever you switch your phone on. Predictive text input is not available for entering welcome note text1. In the standby mode, select Menu > Settings > Phone settings > Welcome note.2. Enter a note (up to 44 characters). Press * to display and select from the available special characters.3. When you are finished, select Options > Save to save the welcome note or Delete to delete the previous text and create another welcome note.Help textYour phone displays brief descriptions for most menu items. These descriptions are called help text.The default setting for help text is On. To turn help text on or off, in the standby mode, select Menu >Settings > Phone settings > Help text activation > On or Off.When Help text activation is turned On, select a feature or menu, pause for 10 to 15 seconds, and wait for the help text to display. Use the scroll keys in view the complete help text, if necessary.

Settings49nTime and date settingsTimeShow or hide the clockIn the standby mode, select Menu > Settings > Time settings > Clock > Show clock or Hide clock.Set the time1. In the standby mode, select Menu > Settings > Time settings > Clock > Set the time.2. Enter the time (in hh:mm format), and select OK.3. Select am or pm if your selected12-hour format.Change the formatIn the standby mode, select Menu > Settings > Time settings > Clock > Time format > 24-hour or 12-hour. DateShow or hide the dateIn the standby mode, select Menu > Settings > Time settings > Date > Show date or Hide date.Set the date1. In the standby mode, select Menu > Settings > Time settings > Date > Set the date.2. Enter the date, and select OK.Change the date format1. In the standby mode, select Menu > Settings > Time settings > Date.2. Scroll to Date format, and select a format. 3. Scroll to and select the Date separator.4. Select a separator. Set the auto-update of date and timeAuto-update is a network service. See "Network services," p. 5.

Settings50If your wireless service provider supports this feature, you can allow the digital network to set the clock, which is useful when you are out of your home area, or when you have traveled to another network or time zone.In the standby mode, select Menu > Settings > Time settings > Auto-update of date & time > On, Confirm first, or Off.If you use the Auto-update of date & time option while outside your digital network, you may be prompted to enter the time manually. Network time will replace the time and date when you re-enter your digital network.If your battery has been removed or has drained outside the digital network, you may be prompted to enter the time manually (once the battery is replaced or recharged, and you are still outside of the digital network). nDisplay settingsWallpaperYou can set your phone to display a background picture (wallpaper) in the standby mode. To activate or deactivate wallpaper, in the standby mode, select Menu > Settings > Display settings > Wallpaper > On or Off. To select the wallpaper you wish to display, do the following:1. In the standby mode, select Menu > Settings > Display settings > Wallpaper > Select wallpap.2. Highlight the Graphics folder, and select Open.3. Browse the folder. 4. When you find an image, select Options > Set as wallpap.Color schemeYou can change the color of some display components in your phone, such as indicators and signal bars.1. In the standby mode, select Menu > Settings > Display settings > Color schemes.2. Select the color scheme of your choice.BannerBanner is a network service. See "Network services," p. 5.

Settings55Activate or deactivate phone lockThe phone lock feature protects your phone from unauthorized outgoing calls or unauthorized access to information stored in the phone. When phone lock is activated, Phone locked is displayed each time you turn your phone on.When the device is locked, calls still may be possible to the official emergency number programed into your device.Call not allowed is displayed if you attempt to place a call while phone is locked. To answer a call with phone lock on, select Answer or the call key.1. In the standby mode, select Menu > Settings > Security settings > Phone lock.2. Enter the lock code, and select OK. See "Security settings," p. 54.3. Select one of the following options:•On—Turns on the phone lock feature after power on.•Off—Immediately turns off the phone lock feature.If you selected On, you must enter your lock code and the lock code must be accepted before the phone will function normally.Allow numbers when phone lockedWhen phone lock is on, the only outgoing calls that can be made are to the emergency number programed into your phone (for example, 911) and the numbers stored in the Allowed number when phone locked location.1. In the standby mode, select Menu > Settings > Security settings > Allowed number when phone locked.2. Enter the lock code and select OK. See "Security settings," p. 54.3. Enter the phone number; or select Search to recall the number from the phone book, and select OK.4. Press the call key to press the call.Change lock codeWhen you change your lock code, make sure you store it in a safe place, away from your phone. Avoid entering access codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.The preset lock code, by default, is the last four digits of your phone number. Depending on your wireless service provider, the preset lock code can be a four-

Settings56digit number such as 1234 or 0000. If these codes do not work, contact your wireless service provider for help.If you enter an incorrect lock code five times in a row, your phone will prompt you for the 5-digit, security code. By default, the security code is 12345, a five-digit number. Note: If the wrong lock code is entered five times in a row, your phone will not accept additional entries for 5 minutes, even if you power off the phone between incorrect entries.1. In the standby mode, select Menu > Settings > Security settings > Change lock code.2. Enter the current (or default) lock code, and select OK.3. Select Change lock code.4. Enter the new lock code (must be 4 characters in length), and select OK.5. Reenter the new lock code for verification, and select OK.When changing your lock code, make sure you store it in a safe place, away from your device. Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls.Voice privacyVoice privacy is a network service. See "Network services," p. 5. If your wireless service provider supports this feature, the voice privacy feature protects the privacy of your current phone conversation from other callers placing phone calls on your same network.In the standby mode, select Menu > Settings > Security settings > Voice privacy > On or Off.nNetworkThe menu options in your phone are based on your service provider’s network. The network determines which options actually appear in the phone menu. Check with your service provider for more information.The Network menu allows you to customize the way your phone chooses a network in which to operate while you are within or outside of your primary or home system. Your phone is set to search for the most cost-effective network. If your phone cannot find a preferred network, it selects a network automatically based on the option you choose in the Network menu.

Settings57Roaming optionsTo set your phone to roam or search for another network when you are not in your home area, do the following:1. In the standby mode, select Menu > Settings > Network > Roaming options.2. Select one of the following options:Home only—Make and receive calls in your home area only.Automatic—Phone automatically searches for service in another digital network. Automatic A scans the channels in the A carrier’s system. Automatic B scans the B system. The roaming rate applies when your are not in the home service area.3. Select OK, if necessary, to confirm the activation.ModeYou can choose whether your phone uses digital or analog service.In the standby mode, select Menu > Settings > Network > Mode, and one of the following service options:Digital pref.—The phone works in digital mode but will also work in analog mode when digital mode is unavailable.Digital only—The phone only works in digital mode.Analog only—The phone only works in analog mode.nNetwork servicesThe following features are network services. See "Network services," p. 5.Store a feature code1. In the standby mode, select Menu > Settings > Network services > Network feature setting. 2. Enter the feature code from your service provider (for example, *633 Forward if busy), and select OK. 3. Select the type of forwarding that matches the feature code you entered (for example, Call forwarding).

Settings58The activated feature code is now stored in your phone, and you are returned to the Feature code: field. Continue entering other feature codes (for example, *633), or press the end key to return to standby mode. Once you enter a network feature code successfully, the feature becomes visible in the Network services menu.Call forwardingCall forwarding tells your network to redirect incoming calls to another number. Call forwarding is a network service and may not work the same in all networks, so contact your wireless provider for availability.Activate1. In the standby mode, select Menu > Settings > Network services > Call forwarding and select one of the following options: Forward all calls, Forward if busy, Forward if not answered, Forward if out of reach, or Cancel all call forwarding.2. Select Activate.3. Scroll to and select the destination to which your calls will be forwarded.4. Enter the number to which your calls, data, or other information will be forwarded, and select OK.Call waitingIf your wireless provider supports this feature, call waiting notifies you of an incoming call even while you are in a call. You can then accept, decline, or ignore the incoming call.1. In the standby mode, select Menu > Settings > Network services > Call waiting > Activate or Cancel.2. During a call, select Answer or the call key to answer the waiting call.The first call is put on hold. 3. Press the end key to end the active call.Send own caller ID when callingIf your wireless service provider supports this feature, you can prevent your number from appearing on the receiving party caller ID.

Settings59In the standby mode, select Menu > Settings > Network services > Send my caller ID >Yes or No.Select your own phone numberIf your wireless service provider supports this feature, and you have more than one number, you can select the number to be used. In the standby mode, select Menu > Settings > Network services > Own number selectionnRestore factory settingsThis option resets some of the menu settings to their original values. It does not delete data that you have entered or downloaded, or affect entries in your contacts list.In the standby mode, select Menu > Settings > Restore factory settings. Enter the security code, and select OK. See "Security settings," p. 54.Note: Depending on your wireless provider, your device may sometimes ask you for the security code (defaulted to 12345) instead of the lock code.

Gallery609. GalleryPictures and ring tones can be saved to folders in the Gallery, or to folders created of your own. Images and tones can be downloaded using web sites.nOpen the galleryIn the standby mode, select Menu > Gallery.where you can View folders, Add folder, Delete folder, and Rename folder.nView folders1. In the standby mode, select Menu > Gallery > View folders > Images, Graphics, or Tones > Open.2. Scroll to and select an image, graphic or tones, and Options > Open, Delete, Move, Rename, Set as wallpap., Details or Sort.

Games6110. GamesChallenge yourself or a friend to one of the fun games in your phone: Air Glide, Bowling, and Sky Diver. Some menus listed are network services. Contact your wireless provider for more information.nPlay a game1. In the standby mode, select Menu > Games > Select game.2. Scroll to a game, and select Options > Open or the call key.3. Select one of the following options (if supported by the particular game):New game—Launch a new game.High scores—View the high scores for this game (if previously played).Instructions—View instructions for playing the game. Scroll down to read more.nGame settings1. In the standby mode, select Menu > Games.2. Scroll to and select one of the following game submenus: Select game—Select a game or enter a game option list. See "Game details," p. 61.Memory—Check the available memory for games and game-related applications.Settings—Turn Game sounds, Game lights, and Shakes on or off.nGame detailsTo display the name, version, and size of a selected game, select Options > Details.

Voice6211. VoicenVoice tag dialingYou can dial up to 25 stored numbers using voice tag dialing. Before using voice tags, note that:• Voice tags are not language-dependent. They are dependent on the speaker's voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment.• Very short names are not accepted. Use long names and avoid similar names for different numbers.Note: Voice tag use may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.Assign a voice tagBefore you use voice dialing, assign a voice tag to the number.1. In the standby mode, scroll down to enter the contacts list.2. Highlight the contact to assign a voice tag, select Details > Options > Add voice tag > Start.3. Speak clearly into the microphone. Do not select Quit unless you want to cancel the recording.The phone automatically stops recording, saves, and replays the voice tag. The icon is displayed next to commands that have voice tags assigned.If the recording is not successful, your phone displays Voice system error. Select Options > Add voice tag, and repeat Step 3.Dial a numberIn the standby mode, select and hold Contacts. When you hear several beeps, Speak now is displayed. Release Contacts. Pronounce the voice tag clearly into the microphone.

Voice63When the phone finds the voice tag, Found: is displayed, and the phone automatically dials the number. If the phone does not locate a number or recognize the voice tag, No match found is displayed. Voice tagsAfter you have associated a voice tag to a contact, in the standby mode, select Menu > Voice > Voice tags > Options > Playback, Change, or Delete.nVoice commandsSet as many as five voice commands, to allow hands-free operation of certain phone features. Assign a voice tag to a commandBefore using voice commands, you must first add a voice tag to the phone function. 1. In the standby mode, select Menu > Voice > Voice commands.2. Select the phone function you wish to tag: Profiles, Voice mailbox, Voice recorder or Call log.3. If necessary, scroll to an option associated with that function, select Options > Add command.4. Select Start, and speak the voice tag clearly into the microphone. Do not select Quit unless you want to cancel the recording.The phone replays and saves the recorded tag. appears next to commands that have voice tags assigned.Activate a voice commandAfter you have associated a voice tag with a phone function, you can issue a command by speaking the voice tag.1. Select and hold Contacts.2. When Speak now appears, pronounce the voice tag clearly into the microphone. When the phone finds the voice tag, Found: is displayed, and the phone plays the recognized voice tag through the earpiece. The function you requested is activated.

Voice64OptionsAfter you have associated a voice tag to a command, in the standby mode, select Menu > Voice > Voice commands > Options > Playback, Change, or Delete:nVoice recorderThis feature allows you to record speech or sound with your phone and listen to them later. The total available time is 30 seconds if no memos have been stored. The maximum length of a recording depends on how much memory remains available.The recorder cannot be used when a data call or GPRS connection is active.Record speech or sound1. In the standby mode, select Menu > Voice > Voice recorder > Record.2. After the recorder start tone is heard, begin recording speech or sound.3. When you are finished recording, select Stop.4. Enter the title for the recording, and select OK.OptionsAfter you have saved the recording to the Recordings list, highlight the recording, and select one of the following options: Playback, Delete, Edit title, and Alarm or Add alarm.

Organizer66With the phone on, select Stop to shut the alarm off, or select Snooze. The alarm stops for 10 minutes and Snooze on is displayed.If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.Turn an alarm offIn the standby mode, select Menu > Organizer > Alarm clock > Alarm time > Off.nCalendarThe calendar tracks reminders, calls to make, meetings, and birthdays. It can even sound an alarm for any of these events.Monthly view provides an overview of the selected month and weeks. It also allows you to jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder.OpenIn the standby mode, select Menu > Organizer > Calendar.Move the cursor in some calendar views with the up and down scroll keys.Go to a date1. In the standby mode, select Menu > Organizer > Calendar > Options > Go to date.2. Enter the date (for example, mm/dd/yyyy), and select OK.Note a specific dateYou can choose from five types of notes: Meeting, Call, Birthday, Memo, and Reminder. Your phone asks for further information depending on which note you choose. You also have the option to set an alarm for any note that you select.1. Go to the date for which you want to set a reminder. See "Go to a date," p. 66, in the previous section if you need more information.

Organizer672. From the monthly view (with the go to date highlighted), select Options > Make a note, and one of the following note types:Meeting—Enter a subject, a location, and a start and end time. You can then set an alarm.Call—Enter a phone number, a name, and the time. You can then set an alarm.Birthday—Enter the person’s name, and year of birth. You can then set an alarm.Memo—Enter a subject and an end date, and set an alarm.Reminder—Enter the subject, and set an alarm.3. Enter your note, and select Options > Save.View notes (day view)To view the created calendar notes, do the following:1. In the standby mode, select Menu > Organizer > Calendar.2. Scroll to the date that has a note. (Days with notes are in bold font.)3. Select Options > View day. 4. To view a highlighted note, select Options > View.Send a note1. In the standby mode, select Menu > Organizer > Calendar.2. Scroll to the date containing the note. Any days containing notes are in bold font.3. Select Options > View day.4. Scroll to the note, and select Options > Send note > Via calendar or Via text msg.5. If you selected Via calendar, enter the number for the recipient or select Search to retrieve a number from the contacts list, and select OK.6. If you selected Via text msg., the note appears as a text message. 7. Select Add number.8. Enter the number for the recipient, or select Search to retrieve a number from the contacts list, and select OK.

Organizer689. Select Options > Send.Receive notesWhen you receive a calendar note in calendar-to-calendar (vCal) format, Calendar note received is displayed. When you receive a calendar note as a text message, a message notification appears in the standby mode. You can then view, save, or discard the note, and set an alarm for any date and time.nCalculatorThe calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root, changes the sign of the number entered, and converts currency values.Note: This calculator has a limited accuracy and is designed for simple calculations.1. In the standby mode, select Menu > Organizer > Calculator.2. Enter the first number in the calculation.Press # for a decimal point if necessary.Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the displayed character.3. Enter the second number in your calculation.4. Select Options (equals is highlighted). To perform a square or square root calculation, select Options > Square or Square root.To change the sign, select Options > Change sign, or scroll to the key.Currency converterYou can convert foreign currency to domestic directly from the standby mode or from the Calculator menu.1. In the standby mode, enter a currency amount to convert. Select Menu > Organizer > Calculator and enter a currency amount to convert.2. Select Options > To home or To foreign.To home—converts foreign currency to domestic currencyTo foreign—converts domestic currency to foreign currency

Organizer693. Enter the exchange rate (press # to insert a decimal), and select OK.You can also edit the exchange rate at any time. When you change base currency, you must enter the new rates because all previously set exchange rates are set to zero1. In the standby mode, select Menu > Organizer > Calculator > Options > Exchange rate, and one of the following:Foreign unit expressed in domestic units—The number of home units it takes to make one unit of foreign currency.Domestic unit expressed in foreign units—The number of foreign units it takes to make one unit of your home currency.2. Enter the exchange rate, and select OK.nCountdown timerYou can enter a specified countdown time (up to 99 hours and 59 minutes). When the time runs out, your phone sounds an alarm. The countdown timer only works when the phone is on.Set the countdown timer1. In the standby mode, select Menu > Organizer > Countdown timer.2. Enter the time (in hh:mm format), and select OK.3. Enter a note for the timer, and select OK. The icon appears in the standby mode when the countdown timer is set.When the time runs out, your phone sounds an alarm, displays the timer note, and flashes its lights. • Press any key during the alarm to stop the timer. • After 30 seconds the timer alert expires automatically.Change the timeAfter you have set the timer, you can change the time. 1. In the standby mode, select Menu > Organizer > Countdown timer > Set timer:.2. Enter the new time, and select OK.

$Organizer703. Leave the note as it was, or enter a new note, and select OK. Stop the timerAfter you have set the timer, you can stop the timer at any time.In the standby mode, select Menu > Organizer > Countdown timer > Stop timer.nStopwatchYour phone has a stopwatch that displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:s format.Using the stopwatch or allowing it to run in the background when using other features increases the demand on battery power and reduces the battery life. Measure time1. In the standby mode, select Menu > Organizer > Stopwatch > Split timing or Lap timing > Start. The running time is displayed on the screen.2. Select Split to note the lapsed time. The timer continues to run. The split time appears below the running time. If you split the time more than once, the new measured time appears at the beginning of the list. Scroll to see previous measured times.3. Select Lap to note the lap time. The clock stops, then starts immediately from zero. The lap time appears below the running time. If you take more than one lap time, the new measured time appears at the beginning of the list. You can scroll to see previous measured times. When you select Stop, the total time appears at the top.4. Select Stop to end the timing. The total time is displayed on the screen.5. Select Options > Save to save the split or lap time.6. Enter a name for the measurement, and select OK. If you do not enter a name, the total time is used as the default title for the time.Operation noteIf you press the end key and return to standby mode, the clock continues to run in the background and appears in the upper left corner of the screen.$

Microsoft RH-71 Tri-mode Dual Band Analog/PCS Phone User Manual Bravo R210 Verizon 060105

Microsoft Mobile Oy Tri-mode Dual Band Analog/PCS Phone Bravo R210 Verizon 060105

Contents

Manual 3

Navigation menu

Namespaces

Views

Navigation