Microsoft RH-77 CDMA 800 Cellular Phone User Manual Nokia 2118 FCC Draft

Microsoft Mobile Oy CDMA 800 Cellular Phone Nokia 2118 FCC Draft

UserManual.wiki >

Microsoft >

RH 77 User Manual

Manual

4FCC DRAFTPart No. 9237873, Issue No. 1Copyright © 2005 Nokia. All rights reserved.Nokia, Nokia 2118, Xpress-on, Pop-Port, Nokia Connecting People, and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other company and product names mentioned herein may be trademarks or trade names of their respective owners.US Patent No 5818437 and other pending patents. T9 text input softwareCopyright ©1999-2005. Tegic Communications, Inc. All rights reserved.Includes RSA BSAFE cryptographic or security protocol software from RSA Security.The information contained in this user guide was written for the Nokia 2118 product. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes to any of the products described in this document without prior notice.UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.EXPORT CONTROLSThis device may contain commodities, technology, or software subject to export laws and regulations from the U.S. and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Contents5FCC DRAFTContentsContents .......................................................................................................... 5For your safety............................................................................................... 6Welcome.......................................................................................................... 91. Nokia 2118 phone at a glance........................................................... 112. Set up your phone.................................................................................. 153. Text entry ................................................................................................. 224. Contacts list ........................................................................................... 255. Messages .................................................................................................. 346. Call log...................................................................................................... 447. Profiles ...................................................................................................... 488. Settings..................................................................................................... 499. Voice .......................................................................................................... 6210.Organizer ................................................................................................. 6611.Games....................................................................................................... 7412.Minibrowser ........................................................................................... 7513.PC connectivity...................................................................................... 7714.Enhancements ....................................................................................... 7815.Reference information ........................................................................ 80Care and maintenance .............................................................................. 81Additional safety information................................................................. 83Nokia One-Year Limited Warranty ..................................................... 102Index............................................................................................................ 107

For your safety6FCC DRAFTFor your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. Switch on safelyDo not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger.Road safety comes firstObey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.InterferenceDo not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.Switch off in hospitalsFollow any restrictions. Switch the phone off near medical equipment.Switch off in aircraftFollow any restrictions. Wireless devices can cause interference in aircraft.Switch off when refuelingDon't use the phone at a refueling point. Don't use near fuel or chemicals.Switch off near blastingFollow any restrictions. Do not use the phone where blasting is in progress.Use sensiblyUse only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.Qualified serviceOnly qualified personnel may install or repair this product.

For your safety7FCC DRAFTEnhancements and batteriesUse only approved enhancements and batteries. Do not connect incompatible products.Water-resistanceYour phone is not water-resistant. Keep it dry.Backup copiesRemember to make backup copies or keep a written record of all important information stored in your phone.Connecting to other devicesWhen connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.Emergency callsEnsure the phone is switched on and in service. Press the end key as many times as needed to clear the display and return to the main screen. Key in the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.About your phoneThe wireless phone described in this guide is approved for use on the CDMA 800 network. Contact your service provider for more information about networks.When using the features in this device, obey all laws and respect privacy and legitimate rights of others.Warning: To use any features in this device, other than the alarm clock, the phone must be switched on. Do not switch the device on when wireless phone use may cause interference or danger.Network ServicesTo use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These Network Services may not be available on all networks or you may have to make specific arrangements with your service provider before you can utilize Network Services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use Network Services. For instance, some networks may not support all language-dependent characters and services.

For your safety8FCC DRAFTYour service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Contact your service provider for more information.Shared memoryThe following features in this device may share memory: contacts, text messages, ring tones, calendar, and games. Use of one or more of these features may reduce the memory available for the remaining features sharing memory. Your phone may display a message that the memory is full when you try to use a shared memory feature. In this case, delete some of the information or entries stored in the shared memory features before continuing. Some of the features, such as messages and ring tones may have a certain amount of memory specially allotted to them in addition to the memory shared with other features.

Welcome9FCC DRAFTWelcomeCongratulations on your purchase of the Nokia 2118 mobile phone. Your phone provides many functions which are practical for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar, and more. To personalize your phone, you can set your favorite ring tones and select an Xpress-onTM color cover. ■Register your phoneMake sure to register your phone at www.warranty.nokiausa.com or call 1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if you should call a customer center or to have your phone repaired.■Get helpFind your phone labelIf you need help, Nokia Customer Care is available for assistance. Before calling, we recommend that you write down the electronic serial number (ESN) and have it available.The ESN is found on the type label, which is located beneath the battery on the back of the phone.Contact NokiaPlease have your product with you when contacting either of the following numbers:Nokia Customer Care Center, USANokia Inc.7725 Woodland Center Boulevard, Suite #150Tampa, Florida 33614Tel: 1-888-NOKIA-2U (1-888-665-4228)Fax: 1-813-249-9619TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)Customer Care Center, MexicoNokia Mexico, S.A. de C.V.Paseo de los Tamarindos 400-A Piso 16Col. Bosques de las Lomas

Welcome10FCC DRAFTC.P. 05120Mexico D.F., MexicoTel: (55) 261-7200Fax: (55)261-7299Customer Care Center, ArgentinaAzopardo 1071C1107ADQ Buenos AiresArgentinaTel: (11) 4307-1427Fax: (11) 4362-8795Customer Care Center, CanadaNokia Products Ltd.601 Westney Road SouthAjax, Ontario L1S 4N7Tel: 1-888-22-NOKIA (1-888-226-6542)Fax: 1-905-619-4360UpdatesFrom time to time, Nokia updates this guide to reflect changes. The latest version may be available at www.nokia.com. An interactive tutorial for this product may be available at the web site www.nokiahowto.com.Accessibility solutionsNokia is committed to making mobile phones easy to use for all individuals, including those with disabilities. For more information visit the web site at www.nokiaaccessibility.com.

Nokia 2118 phone at a glance11FCC DRAFT1. Nokia 2118 phone at a glancePower key (1) Microphone (7)Earpiece (2) Charger port (8)Right selection key (3) Scroll up and down key (9)End key (4) Call key (10)Keypad (5) Left selection key (11)Connection port (6) Screen (12)

Set up your phone15FCC DRAFT2. Set up your phone■AntennaYour device has an internal antenna located towards the top of the phone. Hold the phone as you would any other telephone with the antenna area pointed up and over your shoulder. Note: As with any other radio transmitting device, do not touch the antenna unnecessarily when the device is switched on. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed. Avoid contact with the antenna area when operating the phone to optimize antenna performance and battery life.■BatteryAlways switch the device off and disconnect the charger before removing the battery.Remove the back cover1. With the back of the phone facing you, push down on the button on the back of the phone. 2. Slide the back cover toward the bottom of the phone and remove.Remove the batteryAfter you have removed the back cover, insert your finger into the finger grip and lift the battery from its compartment.

Set up your phone16FCC DRAFTReplace the battery1. Position the battery so the gold-colored contacts match up with those on the phone.The battery label should face away from the phone.2. Insert the battery, gold-colored contact end first, into the battery slot.3. Push down on the other end of the battery to snap the battery into place.Replace the back coverSlide the back cover toward the top of the phone until you hear a click and see the back cover release button.Charge the battery1. Plug the charger transformer into a standard ac outlet.2. Insert the charger output plug into the round jack at the bottom end of the phone.After a few seconds, the battery indicator in the display starts to scroll from bottom to top. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or any calls can be made.

Set up your phone17FCC DRAFT■Turn your phone on or offTo turn your phone on or off, press and hold the power key on top of the phone for at least 3 seconds.■Connect the headsetA compatible headset may be purchased with your phone or separately as an enhancement. (See "Enhancements," page 78.)1. Plug the headset connector into the Pop-Port™ connector at the bottom end of your phone.2. Position the headset on your ear.With the headset connected, you can make, answer, and end calls as usual.• Use the keypad to enter numbers.• Press the call key to place a call.• Press the end key to end a call.■Change the Xpress-on™ covers Note: Before removing the cover, always switch off the power and disconnect the charger and any other device. Avoid touching electronic components while changing the covers. Always store and use the device with the covers attached.Remove the back coverSee "Remove the back cover," page 15 for instructions on removing the back cover.

Set up your phone18FCC DRAFTRemove the front coverGently pull the bottom of the front cover away from the rest of the phone and remove.Install the key mat and front cover1. Remove the key mat from the old front cover and place it into the new front cover as shown.2. Press the front cover and key mat against the phone, and snap the front cover into place.Replace back coverSee "Replace the back cover," page 16.

Set up your phone19FCC DRAFTInsert a photo in the back coverYou can insert one of your favourite photos in the back cover to personalise your phone. The size of the photo should not be larger than 45 mm x 25 mm. Trim the sides and corners at the bottom of the photo. Please note, if the photo is smaller than the window size, it may not stay in its position. The photo should be inserted with its image side facing the transparent window of the cover.■Make a callUse the keypad1. Enter the phone number (including the area code), and press the call key.(To delete a character to the left of the cursor, select Clear.)2. Press the end key to end the call or to cancel the call attempt.Use the save contact option1. In the standby mode, enter the phone number (including the area code) and select Options > Save, enter a name for the the contact, and select OK.2. Press the call key to make the call, or select Done to return to standby mode.Use the contacts list1. In the standby mode, scroll down to display the contents of your contacts list.2. Press the call key to make the call, or select Details to view details of the entry.Use the last dialed number1. In the standby mode, press the call key to display the last 20 numbers dialed. 2. Scroll to the number (or name) you wish to redial, and press the call key.

Set up your phone20FCC DRAFTA conference callConference calling is a network service that allows you to take part in a conference call with two other participants.1. Make a call to the first participant.2. With the first participant on the line, select Options > New call.3. Enter the phone number of the second participant, or select Search to retrieve a number from the contacts list. 4. Select Flash. The first participant is put on hold.5. When the second participant picks up, press the call key to connect the calls.6. To end the conference call, select Options > End all calls, or press the end key.■Answer callsAnswer a call with the keypad lockedTo answer a call with the keypad locked, press the call key. During the call, all features function as normal. When you end or reject the call, the keypad automatically relocks. See "Keyguard," page 21.When the phone is locked, calls still may be possible to the official emergency number programmed into your phone. Adjust the volume during a callTo increase or decrease the volume during a call, scroll up or down during the call. When adjusting the volume, a bar chart appears in the display indicating the volume level.LoudspeakerYou can use your phone as a loudspeaker during a call. Do not hold the phone to your ear during the loudspeaker operation.Warning: Do not hold the device near your ear when the loudspeaker is in use because the volume may be extremely loud.• To activate the loudspeaker while in a call, select Loudsp.• To deactivate the loudspeaker during a call, select Handset.

Text entry22FCC DRAFT3. Text entryYou can use two methods for entering text and numbers:• Standard mode is the only way to enter text into the contacts list, and to rename caller groups.• Predictive input is a quick and easy method for writing messages and creating a calendar note.■Standard modeText (Abc)• Press a key once to insert the first letter on the key, twice for the second letter, etc. If you pause briefly, the last letter in the display is accepted and your phone awaits the next entry.• Press 0 to enter a space thereby accepting a completed word.• Press 1 to enter a period (.).• Press * to display special characters. See more about special characters on the following pages.Numbers (123)To switch to 123 mode from Abc mode, press and hold # at any message entry screen until the icon in the upper left corner of the display switches from Abc to 123 (or vice versa).To enter a single number in Abc mode, press and hold the specific number key until the number appears.Punctuation and special charactersWhile at any text entry screen, press * to display special characters (press and hold * if predictive text is on). Scroll to navigate through the list of special characters. Once a character is highlighted, select Insert to insert the character into your message.

Text entry23FCC DRAFTDelete textTo delete text, you can use either option.• Select Clear to backspace the cursor and delete a character.• Select and hold Clear to backspace continuously and delete characters.■Predictive text inputPredictive text input allows you to write messages quickly using your keypad and the built-in dictionary. It is much faster than the standard mode method, because for each letter, you only press the corresponding key on your keypad once.Activate and deactivate1. At any text entry screen, select Options > Predictive text.2. Select the language of your choice.The language setting affects the time and date formats of the clock, alarm clock, and calendar.Enter textThe illustration below simulates your display each time a key is pressed. For example, to write Nokia with predictive text on and with the English dictionary selected, press each of the following keys once:• Press 0 to enter a space and begin writing the next word.• If a displayed word is not correct, press * to see other matches. To return to the previous word in the list of matches, select Previous.• If ? appears after a word, select Spell to add the word to the dictionary.• Press 1 to insert a period into your message.• Press and hold * to display special characters. Press * again to cycle through all available characters.• Press and hold the specific number key to enter a number.66 542

Text entry24FCC DRAFT• Press # to switch predictive text on or off and to use predictive text in various modes. As you press #, the following icons (not the descriptions) appear in the upper left of the display screen: Uppercase text: standard mode is on. Lowercase text: standard mode is on Sentence case text: standard mode is on. Sentence case text: predictive text is on. Lowercase text: predictive text is on.Delete textTo delete text, you can use either option.•Select Clear to backspace the cursor and delete a character.•Select and hold Clear to backspace continuously and delete characters.

Contacts list25FCC DRAFT4. Contacts list The contacts list can hold up to 250 contacts with multiple numbers and text notes for each contact. The amount of numbers and text entries that you can save may vary, depending on length and the total number of entries in the contacts list.■Search1. In the standby mode, select Contacts > Search.2. Enter the first character of the contact name and highlight the contact you wish to view.3. Select Details > Options and the action you want to apply to the contact.■Add new contactsSave a name and number1. In the standby mode, enter the phone number you wish to save.2. Select Options > Save.3. Enter the name, and select OK > Done.Save a number (only)1. In the standby mode, enter the phone number you wish to save.2. Select and hold Options. Save an entry1. In the standby mode, select Contacts > Add new.2. Enter the name, and select OK.3. Enter the phone number, and select OK > Done.

Contacts list26FCC DRAFTSave voice mail dialing codeYou can insert special characters called dialing codes into phone numbers such as voice mail, and save the number to a speed dial location. Dialing codes instruct the receiving system to pause, wait, bypass, or accept the numbers that follow them in the dialing string.Voice mail services vary by service provider. The following instructions are examples of common operations. Please check with your service provider for specific instructions for using your voice mail service.Write down number and process1. Write down your voice mailbox number.2. Call and check your voice mail as you normally would.3. Write down your interaction with the recorded prompts step-by-step. Note that each voice mail service may vary. Your steps may resemble the following:Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, and press *.Be precise; you will need this information in "Set up voice mail with dialing codes," page 26.Insert dialing codesPress * repeatedly to cycle through dialing codes. When the desired code appears in the display, pause briefly and the code is inserted into the dialing string.The following dialing codes are available:Set up voice mail with dialing codes1. In the standby mode, select Contacts > 1-touch dialing.2. Scroll to an empty 1-touch dialing slot, and select Assign.Dialing code Indicates...* Bypasses a set of instructions.+ Causes the international access code to be replaced by +.p Pauses for 2.5 seconds before sending any numbers that follow.w Waits for you to press the call key before sending the numbers or codes that follow.

Contacts list27FCC DRAFT3. Enter your voice mailbox number, including the area code.4. Refer to dialing codes, and enter any codes as necessary using the information that you saved from "Write down number and process," page 26.For example, if you pause for 5 seconds after connecting to voice mail, enter p twice after the voice mailbox number, for example, 2145551212pp.5. Enter any remaining pauses or other information that allows you to listen to your messages, and select OK.6. Enter a name (such as voice mail), and select OK.To dial and listen to your voice mail, press and hold the assigned 1-touch dialing key in the standby mode.Save addresses and notesTo save an address or note, add it to an existing entry (contact). 1. In the standby mode, scroll down to display a list of entries in your contacts list.2. Scroll to a name to which you want to add information.3. Select Details > Options > Add detail > E-mail, Web address, Street addr., or Note.4. Enter the text for the note or address, and select OK.Save multiple numbersYou can save different types of phone numbers and short text items per name to the contacts list. The first number you save for any entry is automatically set as the default, but the default number can always be changed.1. In the standby mode, scroll down to display a list of entries. Highlight the entry you wish to add a phone number or text item.2. Select Details > Options > Add number or Add detail.3. Select General, Mobile, Home, Work, Fax, or E-mail, Web address, Street addr., or Note.4. Enter the number or text for the type you have selected, and select OK.5. To change the type, select Change type in the options list.To change the default number for the contact entry.

Contacts list29FCC DRAFTAssign a key to 1-touch dialing1. In the standby mode, select Contacts > 1-touch dialing.2. Scroll to any empty slot, and select Assign.3. Enter the number (including the area code), and select OK; or select Search to retrieve a number from the contacts list.4. Enter the contact name for the number, and select OK. If 1-touch dialing is off, the phone displays a prompt asking if you want to turn 1-touch dialing on.5. Select Yes to activate 1-touch dialing. Change 1-touch dialing numbers1. In the standby mode, select Contacts > 1-touch dialing.2. Scroll to the 1-touch dialing entry you wish to change and select Options > Change.3. Enter the new number; or select Search to retrieve a number from the contacts list, and select OK.4. Enter a name for the entry, and select OK. Delete 1-touch dialing numbers1. In the standby mode, select Contacts > 1-touch dialing.2. Scroll to the 1-touch dialing location you wish to delete.3. Select Options > Delete > OK to delete the key assignment.■Edit contacts list entries1. In the standby mode, scroll down to display the contents of your contacts list.2. Scroll to the entry you would like to edit, and select Details.Edit phone number1. Highlight the phone number you would like to edit and select Options.2. Select one of the following options, then OK.Add voice tag—Add a voice tag to the contact.Edit number—Edit an existing phone number of the contact.

Contacts list30FCC DRAFTDelete number—Delete a phone number from the contact.Use number—Display the phone number on the start screen, ready to be called.View—View the details of the contact.Change type >General, Mobile, Home, Work, or Fax—Change the number type.As primary no.—Change the default number of the contact.Add number—Add a number to the contact.Add detail >E-mail, Web address, Street addr., or Note—Add to the contact.Caller groups—Add the contact to an existing caller group.Custom tone—Add a custom ring tone to the contact.Send bus. card—Send the contact as a business card to another phone.Send message—Create and send a message to the contact.1-touch dialing—Add the contact to your speed dial list.Edit name—Edit the name of the contact.View name—View the name of the contact.Delete—Delete the entire contact entry from your contacts list.E-mail address entry1. Highlight the e-mail address entry you want to update and select Options.2. Select one of the following options, then OK.Send e-mail—Send an e-mail.Edit detail—Edit existing details of e-mail.Delete detail—Delete existing e-mail.View—View the details of the e-mail contact.Change type >General, Mobile, Home, Work, or Fax—Change the number type.Add detail >E-mail, Web address, Street addr., or Note—Add to the contact.Add number—Add a number to the entry.Caller groups—Add the e-mail to an existing caller group.

Contacts list31FCC DRAFTCustom tone—Add a custom ring tone to the contact.Send bus. card—Send the contact a business card.Edit name—Edit the name of the contact.View name—View the name of the contact.Delete—Delete the entire e-mail entry from your contacts list.Edit web address1. Highlight the web address entry you want to edit and select Options.2. Select the option you wish to perform, then OK.■Delete contacts list entries1. In the standby mode, select Contacts > Delete.2. To delete individual entries, scroll to One by one. 3. Scroll to the entry you wish to delete, and select Delete > OK to confirm.4. To delete the entire contents of your contacts list, select Delete all > OK.5. Enter the security code, and select OK. See "Security settings," page 56 for more information.■Add number list entriesAdd number allows you to tag each phone number entry with a phone type.1. In the standby mode, select Contacts > Add number.2. Highlight a contact from the list, and select Add.3. Select the tag as General, Mobile, Home, Work, or Fax, and enter the number.■SettingsSettings allows you to determine how your phone numbers are viewed and how much memory remains in the contacts list.1. In the standby mode, select Contacts > Settings.2. Select Scrolling view to select how names and numbers are viewed in Contacts list.

Contacts list33FCC DRAFT3. Enter the number for your recipient or select Search to retrieve a number from your contacts list.4. Select OK. The business card is sent.

Messages35FCC DRAFTWrite and send1. In the standby mode, select Menu > Messages > Text messages > Create message > Add number or Add e-mail.2. Enter the recipient’s phone number; or e-mail address, or select Search to retrieve a number from your contacts list, and select OK.3. Repeat steps 1 and 2 to add more recipients, and select OK.4. Select Options > Edit message.5. Compose a message using the keypad, and select Options > Send.TemplatesTemplates are short, prewritten messages which can be recalled and inserted into new text messages when you are short on time.1. In the standby mode, select Menu > Messages > Text messages > Create message > Edit message >Options > Use template.2. Highlight and select one of the available templates.3. Enter the template into your new message.4. Complete the message using the keypad.5. Select Options > Send.6. If you do not have any recipients you must add them with the Add number option.Create a distribution list1. In the standby mode, select Menu > Messages > Text messages > Distribution lists > Options > Add list.2. Enter a name for the list, and select OK.3. To add a contact to this list, select Options > Add contact, and add the contacts one by one.Send a message to a distribution list1. In the standby mode, select Menu > Messages > Text messages > Create message > Add list.

Messages36FCC DRAFT2. Scroll to a distribution list and select OK Options > Send.Your message is then sent to each of the recipients in the list.Read and replyWhen you receive a message, a notification message displays and the unopened letter icon ( ) appears in the display.1. Select Show to read the message or Exit to dismiss the notification message.When unopened messages are in your inbox, is shown in the upper left corner during standby mode as a reminder.Use the scroll keys to view the whole message, if necessary. 2. Select Options > Reply.3. Compose your reply using the keypad, and select Options > Send.Choose a message optionCreate message optionsWhen you create or reply to a text message, depending on the mode of text input you are using and the features supported by your wireless service provider, some or all of the following options are available:Preview—If a message contains a picture, previews the inserted picture before sending. Select Back to return to the list of options.Send—Send the message to one recipient.List recipients—Send the message to more than one recipient.Settings—Set the priority of the message.Save message—Select Sent items to save the message in the sent items folder; select Templates to save the message as one of your predefined templates; select Archive to save the message in your archive.Clear text—Erase the text clipboard.Exit editor—Save the message to your sent items folder automatically, and leave the message editor.Insert contact—Insert a name from your contacts list into your message.Insert number—Insert a phone number or find a phone number in the contacts list.Use template—Insert a predefined template into your message.

Messages37FCC DRAFTInsert picture—Insert a picture into your message.Change picture—Takes you back to the picture list. Scroll to highlight a new picture, select View > Insert to replace the previous picture in your message.Delete picture—Select OK to delete the picture from your message, or select Back to return to the list of options.Insert smiley—Insert the smiley face of your choice into your message.Insert word or Edit word—Enter or edit the text of a new word that might not appear in the predictive text dictionary. This displays only when the Predictive text option is on.Insert symbol—Insert a special character into your message. This displays only when the Predictive text option is on.Predictive text—Select a predictive text language or select Prediction off to turn this option off.Matches—View matches found in the dictionary for the word you want to use.Read message optionsWhen you read a text message, the following options are available:Delete—Discard the message.Reply—Reply to the message. Create the message and select Options > Send. The sender’s phone number or e-mail is used as the defaultUse number—Select Save, Add to contact, Send message, or Call.Save—Save the message to a folder.Forward—Forward the message to another phone number.Rename—Edit the title of the message.Change sending optionsIn the standby mode, select Menu > Messages > Text messages > Message settings > Sending options and the setting you wish to change:Priority—Select the priority of the note as Normal or Urgent.Delivery note—A note is sent to you confirming delivery of the message. Select On or Off.Send callback number—A callback number is sent to the recipient. Select Off or the default phone number for On.

Messages39FCC DRAFT• Dial the number using the keypad.• Press and hold 1.• Select Listen if there is a notification message in the display.• In the standby mode, select Menu > Messages > Voice messages > Listen to voice messages. When you connect and the prerecorded greeting begins, follow the automated instructions to listen to your voice messages.Automate voice mailYou can can automate voice mail with dialing codes. For more information, see "Save voice mail dialing code," page 26■Picture messagesPicture messaging is a network service. If your wireless service provider supports this feature, your phone comes with five preloaded pictures. Pictures can be attached to a message and sent using text messaging to compatible phones or PCs. Picture messages behave the same as text messages, but pictures take up more space than text. Pictures are stored in the Templates folder at Menu > Messages > Text messages > Templates.Note: Picture message function can be used only if it is supported by your network operator or service provider. Only compatible devices that offer picture message features can receive and display picture messages.Copyright protections may prevent some images, music (including ringing tones) and other content from being copied, modified, transferred, or forwarded.Write and sendWhen a picture is added to a text message, the message converts to picture message. The message counter in the upper right of your display shows the characters available for you to type in.1. In the standby mode, select Menu > Messages > Text messages > Create message > Edit message.2. Write a message using the keypad (or enter nothing if you choose to just send a picture), and select Options.3. Select Insert picture.

Messages40FCC DRAFT4. Scroll down through the pictures, and select View.5. Select Insert to insert the picture into your message; otherwise select Back, scroll to another picture, and select View again.6. To send the picture message, select Options > Send.7. Select Add number.8. Enter the phone number for your recipient, or select Search to retrieve a number from the contacts list, and select OK.9. Select Options > Send.Picture images are not saved in Sent items and can only be received Via text msg.View a picture messageWhen you receive a picture message, the message icon ( ) appears in the display.1. Select Show to view the picture message or select Exit to dismiss the notification message.2. If you have more than one picture message, select the message of your choice.When you have unopened picture messages in your inbox, is shown in the upper left corner during standby mode as a reminder.3. Scroll to view the whole picture if necessary. 4. Once you are finished, select Back to view the notification in the Inbox or Options for other choices such as Reply or Forward.If you would like to save the picture to your Templates folder for later use, select Options > Save picture. You can enter a title for the picture, and select OK.If your templates folder is full of pictures, select the picture you would like to replace.■Minibrowser messagesMinibrowser messaging is a network service. See "Network Services," page 7 for more information.If your wireless service provider supports this feature, you can check for e-mail messages using the minibrowser. In the standby mode, select Menu > Messages > Minibrowser messages > Connect.

Messages41FCC DRAFTSee "Minibrowser," page 75 for more information on using the Minibrowser in your phone to access web pages.■Message foldersSave messages to foldersYou can save drafts of messages or received messages to an existing folder or to a folder that you have created.1. Open the received message or create a new message, and select Options.2. Select Save message > Sent items, Templates, Archive, or a folder you have created on your own.Save the message to another folderWhile viewing a message, select Options > Save message and the destination folder.View saved messages1. In the standby mode, select Menu > Messages > Text messages.2. Select and open the folder containing the message you wish to view.3. Select the message you wish to view.Inbox folderMessages are automatically stored in the inbox after they have been read or if you select Back when a notification appears in standby mode.Sent items folderMessages that you have sent and messages that you have created but have not sent are automatically stored in the sent items folder.When sending messages, set Save to Sent items as sending to Always save or Always prompt to ensure that your messages are saved. If Save to Sent items as sending is set to Off, sent messages are not stored in the sent items folder.To change the settings, select Menu > Messages > Text messages > Message settings > Other settings.

Messages42FCC DRAFTArchive folderStore messages that have been read in the Archive folder.Templates folderPictures and prewritten templates are stored in the Templates folder. Preloaded templates can be edited and customized.My foldersKeep your messages organized by creating custom folders and saving some of your messages there.Add a folder1. In the standby mode, select Menu > Messages > Text messages > My folders > Options > Add folder.2. Enter a name for the new folder, and select OK.Rename a folder1. In the standby mode, select Menu > Messages > Text messages > My folders.2. Any folders that you have created appear in the display. Scroll to the folder you wish to rename, and select Options > Rename folder.3. Select and hold Clear to delete the existing entry, then enter the new name for the folder, and select OK to confirm or Back to exit.Delete a folderOnly folders created in My folders can be deleted. The Inbox, Sent items, Archive, and Templates folders are protected. When you delete a folder, all messages in the folder are also deleted.1. In the standby mode, select Menu > Messages > Text messages > My folders.2. Scroll to the folder you wish to remove, and select Options > Delete folder. 3. Select OK to delete or Back to exit.■Delete messagesIf your message memory is full and you have more messages waiting at the network, blinks during in standby mode. You can do the following:• Read some of the unread messages, and delete them.

Messages43FCC DRAFT• Delete messages from some of your folders.Delete a single messageTo delete a single message, you need to open it first.1. In the standby mode, select Menu > Messages > Text messages.2. Select the folder containing the message you wish to delete.3. Select a the message you wish to delete, and select Options > Delete. 4. Select OK to delete the message or Back to exit.Delete all messages in a folder1. In the standby mode, select Menu > Messages > Text messages > Delete messages.2. Select the folder containing the messages you wish to delete and one of the following:All—Deletes all messages in all of the folders.All read—Deletes any messages which have been read in all of the folders.All unread—Deletes any messages which have not been read in all of the folders.Inbox—Deletes all messages from the Inbox folder.Sent items—Deletes all messages from the Sent items folder.Archive—Deletes all messages from the Archive folder.User defined folders—All user defined folders that the user has added under My folders are displayed at the end of the predefined folders.3. Select OK to delete the messages.

Call log44FCC DRAFT6. Call logCall log stores information about the last 20 missed, 20 received, or 20 dialed calls. It also adds the total duration of all calls. When the number of calls exceed the maximum, the most recent call replaces the oldest.Whether viewing missed, received, or dialed calls, the menu options are the same:Call time—Display the date and time of the call.Send message—Send a message to the number.View number—Display the number.Use number—Edit the number and associate a name with the number.Save—Enter a name for the number and save it to your contacts list.Add to contact—Add the number to an existing entry in your contacts list, if the number is not associated with a name.Delete—Clear the number from memory.Call—Call the number.■View missed callsThe missed calls feature does not function when your phone is switched off. Missed calls are calls that were never answered.1. In the standby mode, select Menu > Call log > Missed calls.2. If a missed call notification appears, select List.3. Scroll to a name or number, and select Options.4. Select an option.■View received callsReceived calls are calls that have been answered.1. In the standby mode, select Menu > Call log > Received calls.2. Scroll to a name or number, and select Options.3. Select an option.

Call log45FCC DRAFT■View dialed numbersDialed calls are previous numbers you have dialed from your phone:1. In the standby mode, press the call key. ORIn the standby mode, select Menu > Call log > Dialed numbers.2. Scroll to a name or number, and select Options.3. Select an option.■Call timesYou can make or receive up to five calls to or from the same number and view the time each call occurred. Your clock must be set for this feature to work accurately.1. While viewing a missed, received, or dialed call, select Options > Call time.2. Scroll down to view the most recent call times from this number; select Back to return to the options list. ■Delete call logsYou can delete any missed, dialed, or received calls from phone memory.1. In the standby mode, select Menu > Call log > Delete recent call lists.2. Select the type of calls you want to clear: All, Missed, Received, or Dialed.■Duration of calls Note: The actual time invoiced for calls and services by your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.Last callIn the standby mode, select Menu > Call log > Call timers >Duration of last call for more information.

Call log46FCC DRAFTShow call time on displayIn the standby mode, select Menu > Call log > Call timers >Duration of last call > Details > Show call time on display > On or Off.Dialed callsIn the standby mode, select Menu > Call log > Call timers >Duration of dialed calls > Details for more information.Received callsIn the standby mode, select Menu > Call log > Call timers >Duration of received calls > Details for more information.All callsIn the standby mode, select Menu > Call log > Call timers >Duration of all calls for more information.Life timerIn the standby mode, select Menu > Call log > Call timers > Life timer.Clear timersIn the standby mode, select Menu > Call log > Call timers > Clear timers, enter your security code, and select OK.■Duration of data/fax callsData/fax calls are a network service. See "Network Services," page 7 for more information. If your wireless service provider supports this feature, you can view the size or duration of sent or received data and fax calls. Note: The actual time invoiced for calls and services by your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.In the standby mode, select Menu > Call log > Data/fax calls and one of the following options:Last sent data/fax—View the size (KB) of the last sent data/fax call.Last received data/fax—View the size (KB) of the last received data/fax call.

Call log47FCC DRAFTAll sent data/fax—View the size (KB) of all sent data and fax calls.All received data/fax—View the size (KB) of all received data and fax calls.Duration of last data/fax call—View the duration time of the last data or fax call.Duration of all data/fax calls—View the duration time of all calls.Clear all data/fax logs—Select OK > Yes to clear all data and fax logs.■Duration of minibrowserMinibrowser is a network service and a carrier-dependent feature. See "Network Services," page 7, for more information. If your wireless service provider supports this feature, you can view the size or duration of sent or received data from the minibrowser. Note: The actual time invoiced for calls and services by your service provider may vary, depending on network features, rounding off for billing, taxes, and so forth.In the standby mode, select Menu > Call log > Minibrowser calls and one of the following options:Last sent browser data—View the size (KB) of the last send browser data.Last received browser data—View the size (KB) of the last received data.All sent browser data—View the size (KB) of all sent browser data.All received browser data—View the size (KB) of all received browser data.Last browser session—View the duration time of the last browser session.All browser sessions—View the duration time of all browser sessions.Clear all browser logs—Select OK > Yes to clear all browser registers.

Settings49FCC DRAFT8. SettingsUse this menu to set or change the time and date settings, call settings, phone settings, tone settings, enhancement settings, security settings, network settings and to restore the factory settings.■Call settingsAnykey answerAnykey answer allows you to answer an incoming call by briefly pressing any key except the power, right selection, or end key.In the standby mode, select Menu > Settings > Call settings > Anykey answer > On or Off.Automatic redialOccasionally, your network may experience heavy traffic, resulting in a fast busy signal when you dial. With automatic redial activated, your phone redials the number, and notifies you once the network is available.In the standby mode, select Menu > Settings > Call settings > Automatic redial >On or Off.1-touch dialingYou can activate or deactivate 1-touch dialing. In the standby mode, select Menu > Settings > Call settings > 1-touch dialing >On or Off.Auto-update of serviceYour phone is capable of receiving updates to network services sent to your phone by your service provider. This feature is a network service.In the standby mode, select Menu > Settings > Call settings > Auto-update of service > On or Off.Minibrowser confirmationYou can specify whether or not you want your phone to display messages when you begin or end a browser session.

Settings50FCC DRAFTSelect Menu > Settings > Call settings >Minibrowser confirmation and one of the following options:None—No confirmation notes are displayed.On connection—Phone asks you to confirm your awareness to possible charges incurred for Internet access.On exit—Phone asks you to confirm your wish to end browsing.Both—Confirmation required before connecting to the Internet and before you terminate a browser session.Calling cardIf you use a calling card for long distance calls, you can save the calling card numbers in your phone. Your phone can store up to four calling cards.Save information1. In the standby mode, select Menu > Settings > Call settings > Calling card.2. Enter your security code, and select OK.3. Scroll to one of the four memory locations, and select Options > Edit > OK > Dialing sequence .4. Select one of the following sequence types:Access no. + phone no. + card no.—Dial 1-800 access number, phone number, then card number and PIN, if required.Access no. + card no. + phone no.—Dial 1-800 access number, card number and PIN, if required, then phone number.Prefix + phone no. + card no.—Dial the prefix (numbers that must precede the phone number) and phone number you want to dial, then card number and PIN, if required.5. Enter the required information (access number or prefix and card number), and select OK to confirm your entries.6. Select Card name.7. Enter the card name, and select OK.Contact your calling card company for more information.

Settings51FCC DRAFTMake callsAfter you have saved your calling card information in your phone, you can make a call using your calling card.1. In the standby mode, select Menu > Settings > Call settings > Calling card. 2. Enter your security code, and select OK. (See "Access codes," page 56.)3. Scroll to the calling card of your choice, and select Options > OK.4. Press the end key to return to standby mode; then enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions.5. Press and hold the call key for a few seconds until Card call is displayed.6. When you hear the tone or system message, select OK.Data or fax callsData or fax calls is a network service. See "Network Services," page 7 for more information.If your wireless service provider supports this feature, you can set up the phone to send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.For better performance during data calls, place the phone on a stationary surface. Do not move the phone by holding it in your hand during a data call.For more information on connectivity, refer to the PC/PDA Connectivity Guide. The PC/PDA Connectivity Guide can be downloaded from the Nokia website at www.nokia.com/us.1. In the standby mode, select Menu > Settings > Call settings > Data/fax calls > Incoming data/fax call and one of the following options:Normal—The phone receives incoming calls as usual.Data calls only—The phone receives only data calls.Fax calls only—The phone receives only fax calls.2. Select Data calls only or Fax calls only.3. When you are finished receiving the fax or data call, repeat steps 1 and 2, and select Normal.

Settings52FCC DRAFTData transferYou can view the transmission speed when sending or receiving data or fax calls.In the standby mode, select Menu > Settings > Call settings > Data/fax calls > Data rate display > Graphic or Off.Call summaryYour phone can display the time spent on a call when you hang up.In the standby mode, select Menu > Settings > Call settings > Call summary > On or Off.■Phone settingsPhone languageIn the standby mode, select Menu > Settings > Phone settings > Phone language and the language of your choice.The language setting affects the time and date formats of the clock, alarm clock, and calendar.Automatic keyguardYou can set the keypad of your phone to lock automatically after a preset time delay.1. In the standby mode, select Menu > Settings > Phone settings > Automatic keyguard > On or Off.2. If you select On, Set delay: appears. 3. Enter the delay (in hh:mm format), and select OK.When keyguard is on, it may be possible to dial the emergency number programmed into your phone.Touch tonesTouch tones are the tones that sound when you press the keys on your phone keypad. You can use touch tones for many automated dial-up services such as banking and airlines or for entering your voice mailbox number and password.

Settings54FCC DRAFTHelp text activationYour phone displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 10 seconds and wait for the help text to display. Scroll to page through the full help text, if necessary.The default setting for help text is on. However, you can turn help text on or off.In the standby mode, select Menu > Settings > Phone settings > Help text activation > On or Off.Display brightnessYou can change the brightness of your phone display.1. In the standby mode, select Menu > Settings > Phone settings > Display brightness.2. Scroll up or down to adjust the brightness level to your preference.3. Select OK to accept your settings.■Time and date settingsTimeShow or hide the clockIn the standby mode, select Menu > Settings > Time and date settings > Clock > Show clock or Hide clock.Set the time1. In the standby mode, select Menu > Settings > Time and date settings > Clock > Set the time.2. Enter the time (in hh:mm format), and select OK.3. Select am or pm (this option displays only when 12-hour format is in use).Change the formatIn the standby mode, select Menu > Settings > Time and date settings > Clock > Time format > 24-hour or 12-hour.

Settings56FCC DRAFT■Enhancement settingsThe enhancement settings menu is shown only if the phone is or has been connected to a compatible enhancement.In the standby mode, select Menu > Settings > Enhancement settings > Headset, Handsfree, TTY/TDD, or Charger and the desired accessory.■Security settingsRestrict callsCall restriction is a network service. See "Network Services," page 7 for more information.If your wireless service providers supports this feature, then you can restrict the calls your phone can make and receive. When calls are restricted, calls still may be possible to the official emergency number programmed into your phone.Contact your service provider for the restriction password.1. In the standby mode, select Menu > Settings > Security settings > Call restrictions.2. Enter the security code, and select OK.3. Select the type of calls you wish to restrict:Restrict outgoing calls—Calls cannot be made.Restrict incoming calls—Calls cannot be received.4. Scroll to an option: Select, Add restriction, Edit, or Delete.Access codesThe security and lock codes control access to features and is supplied with the phone. The preset security code is 12345. Once you change the security code, keep the new code secret and in a safe place separate from your phone.Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialing of the emergency number.If you enter the wrong security code five times in succession, you will not be able to enter a code for five minutes, even if you power off the phone between incorrect entries.

Settings57FCC DRAFTPhone lockThe phone lock feature protects your phone from unauthorized outgoing calls or unauthorized access to information stored in the phone. When phone lock is activated, Phone locked is displayed each time you turn your phone on.When the phone is locked, calls still may be possible to the official emergency number programmed into your phone.1. In the standby mode, select Menu > Settings > Security settings > Access codes > Phone lock.2. Enter the lock code and select OK.3. Select one of the following options:On turns the phone lock feature on immediately after the phone is turned off and then on.Off immediately turns off the phone lock feature.Call not allowed is displayed if you attempt to place a call while the phone is locked.To answer a call with phone lock on, select Answer or press the call key.Allowed phone number when phone lockedWhen phone lock is on, the only outgoing calls that can be made are to the emergency number programmed into your phone (for example, 911 or other official emergency number) and the number stored in the Allowed number when phone locked location.1. In the standby mode, select Menu > Settings > Security settings > Access codes > Allowed number when phone locked.2. Enter the lock code and select OK.3. Enter the phone number, or select Search, recall the number from the phone book, and select OK.Change the lock codeThe lock code allows you to access the phone when it is locked.1. In the standby mode, select Menu > Settings > Security settings > Access codes > Change lock code.2. Enter the current lock code (default is 1234), and select OK.3. Enter the new lock code (4 characters), and select OK.

Settings58FCC DRAFT4. Enter the new lock code again, and select OK.When you change your lock code, make sure you store it in a safe place, away from your phone. Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls.The security code can be used for the lock code.Change the security codeThe security code is needed for tasks such as deleting all contacts or restoring factory settings.1. In the standby mode, select Menu > Settings > Security settings > Access codes > Change security code.2. Enter the current security code (default is 12345), and select OK.3. Enter the new security code (5 characters), and select OK.4. Enter the new security code again, and select OK.When you change your security code, make sure you store it in a safe place, away from your phone. Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls.Voice privacyVoice privacy is a network service. See "Network Services," page 7. If your wireless service provider supports this feature, the voice privacy feature protects the privacy of your current phone conversation from other callers placing phone calls on your same network.In the standby mode, select Menu > Settings > Security settings > Voice privacy > On or Off.■NetworkThe Network menu allows you to customize the way your phone chooses a network in which to operate while you are within or outside of your primary or home system.In the standby mode, select Menu > Settings > Network > Home only or Automatic.Your phone is set to search for the most cost-effective network. If your phone does not find a preferred network, it selects a network automatically based on the option you choose in the Network.

Settings59FCC DRAFT■Network services featuresThe following features are network services. See also "Network Services," page 7.Store a feature code1. In the standby mode, select Menu > Settings > Network services > Network feature setting. 2. Enter the feature code from your service provider (for example, *900 for activating Forward if busy), and select OK. 3. Select Call forwarding.4. Scroll to the type of forwarding that matches the feature code you entered (for example, Forward if busy), select Activate.The activated feature code is now stored in your phone, and you are returned to the Feature code: prompt. Continue entering other feature codes (for example, *900 to cancel Forward if busy), or press the end key to return to standby mode.When you enter a network feature code successfully the feature becomes visible in the Network services menu.Call forwardingCall forwarding tells your network to redirect incoming calls to another number. Call forwarding is a network service and may not work the same in all networks, so contact your wireless provider for availability.ActivateThis is a network service. All options listed may not appear in the display. Contact your wireless provider for more information.1. In the standby mode, select Menu > Settings > Network services > Call forwarding and one of the following options:Forward all calls—Forwards all calls to the number you specify.Forward if busy—Forward incoming calls when you are in a call.Forward if not answered—Forward incoming calls to another number if you are unable to answer. You can set a delay before forwarding takes place.Forward if out of reach—Forward incoming calls when your phone is off.

Settings60FCC DRAFTCancel all call forwarding—Cancel any call forwarding options you have set.2. Select Activate.3. Enter the number to which your calls, data, or other information are forwarded, and select OK.CancelIn the standby mode, select Menu > Settings > Network services > Call forwarding > Cancel all call forwarding.Cancel all call forwarding may affect your ability to receive voice mail messages. Contact your wireless provider for specific details.Call waitingIf your wireless provider supports this feature, call waiting notifies you of an incoming call even while you are in a call. You can then accept, reject, or ignore the incoming call.1. During a call, select Answer or press the call key to answer the waiting call.The first call is put on hold. 2. Press the end key to end the active call.Send my caller IDIf your wireless service provider supports this feature, then you can prevent your number from appearing on the receiving party’s caller ID.In the standby mode, select Menu > Settings > Network services > Send my caller ID > Yes or No.Own number selectionIn the standby mode, select Menu > Settings > Network services > Own number selection. This feature is carrier dependent.■Restore factory settingsYou can reset some of the menu settings to their original values. Data that you have entered or downloaded is not deleted, for example, entries in your contacts list are not affected.1. In the standby mode, select Menu > Settings > Restore factory settings.

Settings61FCC DRAFT2. Enter the security code (the default security code is 12345), and select OK.

Voice62FCC DRAFT9. Voice■Voice dialingYou can dial up to 25 stored numbers using voice dialing.Before using voice tags, note the following:• Voice tags are not language dependent. They are dependent on the speaker’s voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags and use them in a quiet environment.• Very short names are not accepted. Use long names, and avoid similar names for different numbers.Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.Assign a voice tag to an entryBefore you can use voice dialing, you must first assign a voice tag to the number.1. In the standby mode, scroll down to enter the contacts list.2. Highlight the contact you want to assign a voice tag, select Details > Options > Add voice tag.3. Select Start, then speak clearly into the microphone.Do not select Quit unless you want to cancel the recording.The phone automatically stops recording, saves, and replays the voice tag. appears next to the phone numbers which have voice tags assigned.If recording is not successful, your phone displays Voice system error. Select Options > Add voice tag, and repeat step 3.Dial a number1. Select and hold Contacts.2. When you hear several beeps and Please speak now appears, release the key.

Voice63FCC DRAFT3. Pronounce the voice tag clearly into the microphone.When the phone finds the voice tag, Found: appears, and the phone automatically dials the number. If the phone does not locate a number or recognize the voice tag, No match found appears. Voice tagsAfter you have associated a voice tag to a contact, you can choose one of the following options:Play back1. Select Menu > Voice > Voice tags.2. Scroll to the name with the voice tag you want to hear.3. Select Options > Playback.Modify1. Select Menu > Voice > Voice tags.2. Scroll to the name with the voice tag you want to change.3. Select Options > Change.4. Select Start, then speak clearly into the microphone. The phone repeats your voice tag, and Voice tag saved appears.Delete1. Select Menu > Voice > Voice tags.2. Scroll to the name with the voice tag you want to erase.3. Select Options >Delete. Delete voice tag? appears.4. Select OK to erase the voice tag.■Voice commandsYou can set as many as five voice commands, which allow hands-free operation of certain phone features. Add a voice tagBefore using voice commands, you must first add a voice tag to the phone function.

Voice64FCC DRAFT1. In the standby mode, select Menu > Voice > Voice commands.2. Select the phone function you wish to tag: Profiles, Voice mailbox, Voice recorder or Call log.3. If necessary, scroll to an option associated with that function, and select Options > Add command.4. Select Start, and speak the voice tag clearly into the microphone.Do not select Quit unless you want to cancel the recording.The phone replays then saves the recorded tag. appears next to commands that have voice tags assigned.Activate a voice commandAfter you have associated a voice tag with a phone function, you can issue a command by speaking the voice tag.1. Select and hold Contacts.2. When Please speak now appears, pronounce the voice tag clearly into the microphone. When the phone finds the voice tag, Found: appears, and the phone plays the recognized voice tag through the earpiece. The function you requested is activated.Voice tag optionsAfter you have associated a voice tag to a command, select one of the following options:Playback—Listen to the voice command tag.Change—Change the voice command.Delete—Erase the voice command tag.■Voice recorderThis feature allows you to record speech or sound with your phone and listen to them later. The total available time is 60 seconds if no memos have been stored. The maximum length of a recording depends on how much memory remains available.

Voice65FCC DRAFTRecord speech or sound1. In the standby mode, select Menu > Voice > Voice recorder > Record.2. After the recorder start tone is heard, begin recording speech or sound.3. When you are finished recording, select Stop.4. Enter a name for the recording, and select OK. The recording is saved to the Recordings list.Voice recorder optionsAfter you have saved the recording to the Recordings list, highlight the recording, and choose one of the following options:Playback—Listen to the recording using the earpiece.Delete— Erase the recording.Edit title—Rename the recording.Add alarm—Add an alarm to the recording.

Organizer67FCC DRAFTdevice or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.Turn an alarm offIn the standby mode, select Menu > Organizer > Alarm clock > Off.■CalendarThe calendar keeps track of reminders, calls you need to make, meetings, memo, and birthdays. It can even sound an alarm for any of these events.Monthly view provides an overview of the selected month and weeks. It also allows you to jump to a specific date. Any days or dates that appear in bold font contain calendar notes such as a meeting or reminder.OpenIn the standby mode, select Menu > Organizer > Calendar.To move the cursor in some calendar views, use the scroll keys.Go to a date1. In the standby mode, select Menu > Organizer > Calendar > Options > Go to date.2. Enter the date (for example, 15/07/2005), and select OK.Note a specific dateYou can choose from five types of notes: Meeting, Call, Birthday, Memo, and Reminder. Your phone asks for further information depending on which note you select. You can also set an alarm for your note.1. Go to the date for which you want to set a reminder. (See "Go to a date," page 67.)2. From the monthly view (with the go to date highlighted), select Options > Make a note.3. Select one of the following note types:Meeting—Enter the subject and select Options > Save. Enter a location and select Options > Save. Enter a start and end time. Choose an alarm option.

Organizer68FCC DRAFTCall—Enter the phone number and select Options > Save. Enter a name and select Options > Save. Enter a time. Choose an alarm option.Birthday—Enter the person’s name and select Options > Save. Enter the year of birth. Choose an alarm option. Enter a time.Memo—Enter the subject and select Options > Save. Enter an end date. Choose an alarm option. Enter a time.Reminder—Enter the reminder and and select Options > Save. Choose an alarm option. Enter a time.View notes (day view)After you have created some calendar notes, you can view them as follows:1. In the standby mode, select Menu > Organizer > Calendar.2. Scroll to the date containing the note. Days with notes appear in bold type.3. Select Options > View day. 4. To view a highlighted note, select Options > View.Options while viewing a list of notesSelect Options while viewing the day’s notes and one of the following:View—View the full note.Make a note—Create a new note for the selected date.Delete—Delete the note.Edit—Edit the note.Move—Move the note to another date on your calendar.Repeat—Enable the note to recur on a regular basis (daily, weekly, bi-weekly, monthly, and yearly).Tip: Repeat is not available forBirthday note.Go to date—Jump to another date on your calendar.Send note—Send the note to another device using text message, or in calendar format.Copy—Copy the note. You can then paste the note to another date.Settings—Set the date and time, date and time format, the day each week starts and whether you want your notes to auto-delete after a specified time.

Organizer69FCC DRAFTSend a note1. In the standby mode, select Menu > Organizer > Calendar.2. Scroll to the date containing the note you wish to send. Days with notes appear in bold type.3. Select Options > View day.4. Scroll to the note you wish to send, and select Options > Send note > Via calendar or Via text msg. 5. If you select Via calendar, enter the number for the recipient; or select Search to retrieve a number from the contacts list, and select OK. The note is sent.6. If you select Via text msg., select Add number.7. Enter the number for the recipient; or select Search to retrieve a number from the contacts list, and select OK.8. Select Options > Send.Receive a note in calendar formatWhen you receive a calendar note, your phone displays Calendar note received. Save the note in your calendar and set an alarm for any date and time.View notes1. When your phone displays Calendar note received, select Show.2. Scroll to view the entire message, if necessary.Save notesAfter viewing the calendar note, select Options > Save.Discard notesAfter viewing the calendar note, select Options > Discard or select Exit.■CalculatorThe calculator in your phone adds, subtracts, multiplies, divides, calculates the square and the square root, changes the sign of the number entered, and converts currency values.Note: This calculator has a limited accuracy and is designed for simple calculations.

Organizer70FCC DRAFT1. In the standby mode, select Menu > Organizer > Calculator.2. Enter the first number in the calculation.Press # for a decimal point if necessary.Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/) characters. Pause briefly to select the displayed character.3. Enter the second number in your calculation.4. Select Options (equals is highlighted). To perform a square or square root calculation, select Options > Square or Square root. Select Options > Change sign or scroll to change the sign of your result.Currency converterYou can convert foreign currency to domestic, or vice versa.1. At the Calendar screen, enter a currency amount to convert.2. Select Options > To home or To foreign.To home—converts foreign currency to domestic currency.To foreign—converts domestic currency to foreign currency.If you have not done so already, you are prompted to enter the exchange rate.3. Enter the exchange rate (press # to insert a decimal), and select OK.You can also edit the exchange rate at any time.Note: When you change base currency, you must key in the new rates because all previously set exchange rates are set to zero.1. In the standby mode, select Menu > Organizer > Calculator > Options > Exchange rate > Foreign unit expressed in domestic units or Domestic unit expressed in foreign units.Foreign unit expressed in domestic units—The number of home units it takes to make one unit of foreign currency.Domestic unit expressed in foreign units—The number of foreign units it takes to make one unit of your home currency.2. Enter the exchange rate, and select OK.

$Organizer71FCC DRAFT■Countdown timerYou can enter a specified time (up to 99 hours and 59 minutes). When the time runs out, your phone sounds an alarm.The countdown timer only works when the phone is on. Once you turn off your phone, the timer is no longer active.Set the countdown timer1. In the standby mode, select Menu > Organizer > Countdown timer.2. Enter the time (in hh:mm format), and select OK.3. Enter a note for the timer, and select OK. appears in standby mode when the countdown timer is set.When the time runs out, your phone sounds an alarm, displays the timer note, and flashes its lights. • Press any key during the alarm to stop the timer. • After 30 seconds the timer alert expires automatically.Change the timeAfter you have set the timer, you can change the time. 1. In the standby mode, select Menu > Organizer > Countdown timer > Change time.2. Enter the new time, and select OK.3. Leave the note as it was, or enter a new note, and select OK. Stop the timer before the alarm soundsAfter you have set the timer, you can stop the timer.In the standby mode, select Menu > Organizer > Countdown timer > Stop timer.■StopwatchYour phone has a stopwatch that can be used to track time. The stopwatch displays time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:ss format.$

Microsoft RH-77 CDMA 800 Cellular Phone User Manual Nokia 2118 FCC Draft

Microsoft Mobile Oy CDMA 800 Cellular Phone Nokia 2118 FCC Draft

Manual

Navigation menu

Namespaces

Views

Navigation