Microsoft RM-1154 GSM/WCDMA/LTE cellular device w/BT, BLE, WLAN and NFC User Manual User Guide

Microsoft Mobile Oy GSM/WCDMA/LTE cellular device w/BT, BLE, WLAN and NFC User Guide

User Guide

Quick GuideLumia 650 Dual SIM[ERROR: book part number not defined] Issue1 EN  RM-1154
Keys and parts1Main camera2 Audio connector3Earpiece4 Front camera5 Volume keys6 Power/Lock key7Microphone8 Charger connector9Loudspeaker10 Flash
Insert the SIM and memory cards Note: Your SIM card has an effect on importantsettings. Insert the SIM card before switching thephone on.1. Put your finger in the recess at the bottom edgeof the back cover.2. Press the middle of the back cover, bend the coveropen, and remove it.3. If the battery is in, put your fingernail in the recesson its top edge, and lift it out.4. Push the nano-SIM card into the SIM slot with themetal contact area down, until you hear a click. Tip: To remove the SIM, push the card in until it'sreleased, then pull it out.Use only original nano-SIM cards. Use ofincompatible SIM cards may damage the card or thedevice, and may corrupt data stored on the card.5. For Lumia 650 Dual SIM: If you have a second SIMcard, push it into the SIM2 slot, until it locks intoplace.
6. If you have a memory card, slide the card into thememory card slot.
Replace the battery and back cover1. Line up the battery contacts, and put the batteryin.2. Press the top edge of the back cover against thetop edge of your phone, and snap the cover intoplace, locking all the hooks around the edges of thecover.
Switch your phone on and chargethe battery Note: Your SIM card has an effect on importantsettings. Insert the SIM card before switching thephone on.1. To switch your phone on, press and hold thepower key until the phone vibrates. It takes a whilefor the phone to walk you through the setup andget all the apps installed. Your phone’s screen mayeven be black at times, so wait patiently.2. When asked, make sure you select your languageand region correctly. You may not be able tochange some of the settings later on.To charge your phone, plug a compatible chargerinto a wall outlet, and connect the cable to yourphone. You can also charge your phone from acomputer with a USB cable, but it may take a longertime.If the battery is completely discharged, it may takeup to 20 minutes before the charging indicator isdisplayed.
Set up your Microsoft accountWhen you connect your Microsoft account to yourphone, you can get all the cool apps and gamesfrom Windows Store and keep your stuff safe withautomatic backups to the cloud with OneDrive.During the setup, you can create a new account. Ifyou sign in to any Microsoft service, such asOutlook.com (or Hotmail), Office, OneDrive, orXbox, you already have a Microsoft account. Sign inwith the same username and password.When asked, fill in your account details, and selecthow you want to get your one-time verificationcode. Type in your mail address or the last 4 digitsof your phone number. Make sure you rememberyour credentials for the account. You may needthem later. Tip: If your screen switches off, press the powerkey, and drag the lock screen up.
Navigate by touchGo back to the start screenIn any view, tap the start key  .Switch between open appsTap and hold the back key  , and choose the appyou want.To close an app, tap  .Check the available optionsDepending on the app, tap   at the bottom rightcorner or   at the top left corner.Discover all your appsOn the start screen, swipe left to see the apps menu.To go back, swipe right.View notifications and access settingsTo quickly view missed calls and unread mails andmessages, and to access settings, open the actioncentre. Place a finger at the top of the screen, andslide it down.
Zoom in or outPlace 2 fingers on an item, such as a photo or a webpage, and slide your fingers apart or together.
Personalise the start screenAdd a background photoOn the start screen, swipe down from the top of thescreen, and tap   All settings > Personalisation >Start. Switch Background to Tile picture or Fullscreen picture, and tap Browse. Tap a photo, cropit as you like, and tap  .Change theme colourOn the start screen, swipe down from the top of thescreen, and tap   All settings > Personalisation >Colours, and tap a colour.Resize a tileTap and hold the tile, and tap  .The tiles can be either small, medium, or wide. Thebigger the tile is, the more info it can show.Add an app tileSwipe left to go to the apps menu, tap and hold theapp, and tap Pin to Start.
Move a tileTap and hold the tile, drag and drop it to the newlocation, and tap the screen.
Move your stuff to your new LumiaTo transfer your contacts, text messages, pictures,and videos, use the Transfer my Data app.On the start screen, swipe left, and tap   Transfermy Data.Your old phone must support Bluetooth. Not allphones or content may be compatible with thetransfer.To transfer other content, such as music, see thesection for new Lumia users in the   Lumia Help+Tips app.If your old phone is a Lumia phone and you'vebacked up the content and settings to yourMicrosoft account, sign in to your Microsoft accounton your new phone to restore the backup.
Learn moreThere's a user guide in your phone – it's always withyou, available when needed, even without networkconnectivity. On the start screen, swipe left, and tap Lumia Help+Tips.For a printable user guide, online user guide, andtroubleshooting help, go to www.microsoft.com/mobile/support.If you’re new to Lumia, remember to also check outthe Get started app.If your phone doesn’t respondTo reset the phone without losing your data andsettings, press and hold the power key for about 10seconds. The phone vibrates and restarts.You're all set to start your Lumia journey!
Product and safety info Important: For important info on the safe use of your device andbattery, read the Product and safety info booklet before you take yourdevice into use.Some of the accessories mentioned in this user guide, such as charger,headset, or data cable, may be sold separately.You can only use your device on the LTE TDD 1880-1920 (39), 2300-2400(40), 2570-2620 (38); LTE FDD 700 (28), 800 (20), 850 (5), 900 (8),1700/2100 (4), 1800 (3), 1900 (2), 2100 (1), 2600 (7); WCDMA 850, 900,1700/2100, 1900, 2100; and GSM 850, 900, 1800, 1900 MHz networks. Youneed a subscription with a service provider. Important: 4G/LTE might not be supported by your network serviceprovider or by the service provider you are using when traveling. In thesecases, you may not be able to make or receive calls, send or receivemessages or use mobile data connections. To make sure your deviceworks seamlessly when full 4G/LTE service is not available, it isrecommended that you change the highest connection speed from 4Gto 3G. To do this, swipe left on the start screen, and tap   Settings >Network & wireless > Mobile & SIM. Select the SIM, and tapProperties. Switch Highest connection speed to 3G.For more info, contact your network service provider.Use your device only with an original BV-T3G rechargeable battery.Charge your device with AC-18 charger. Charger plug type may vary.Microsoft Mobile may make additional battery or charger modelsavailable for this device.Third-party chargers that comply with the applicable USB requirements,and that can connect to your device USB connector, may also becompatible.The surface of this device is nickel-free.HearingThis device has been tested and rated for use with hearing aids for someof the wireless technologies used in this device. However, there may besome newer wireless technologies used in this device that have not yetbeen tested for use with hearing aids. It is important to try the differentfeatures of this device thoroughly and in different locations, using yourhearing aid or cochlear implant, to determine if you hear anyinterference. Consult your service provider about its return and exchangepolicies and for information on hearing aid compatibility.Your device complies with FCC rules on hearing aid compatibility. Theserules require an M3 rating or higher. The M value of your device is markedon the device sales package. To determine the M-rating of your hearingaid and compatibility with this device, consult your hearing healthprofessional. For more info about accessibility, go towww.microsoft.com/en/mobile/accessibility/hearing-aid-compatibility.
To use a telecoil-equipped hearing aid with this device, activate thehearing aid (T switch) and the device telecoil. The sound quality dependson the type of your hearing aid.Certification information (SAR)This mobile device meets international guidelines for exposure toradio waves.Your mobile device is a radio transmitter and receiver. It is designed notto exceed the limits for exposure to radio waves (radio frequencyelectromagnetic fields), recommended by international guidelines fromthe independent scientific organization ICNIRP. These guidelinesincorporate substantial safety margins that are intended to assure theprotection of all persons regardless of age and health.The exposure guidelines are based on the Specific Absorption Rate (SAR),which is an expression of the amount of radio frequency (RF) powerdeposited in the head or body when the device is transmitting. TheICNIRP SAR limit for mobile devices is 2.0 W/kg averaged over 10 gramsof tissue.SAR tests are carried out with the device in standard operating positions,transmitting at its highest certified power level, in all its frequency bands.The maximum recorded SAR values for this device are:Maximum SAR value Frequency bandsused when MaximumSAR value wasrecordedWhen held againstthe head0.60 W/kg over 10g LTE2600 +WLAN2450When operated at aseparation distanceof 1.5 centimetres(5/8 inch) from thebody0.51 W/kg over 10g LTE1800 +WLAN2450Your mobile device is also designed to meet the United States FederalCommunications Commission (FCC) and Industry Canada SAR (IC)guidelines. FCC ratings for your device and more information on SAR canbe found at transition.fcc.gov/oet/rfsafety/sar.html. Information on ICSAR can be found at www.ic.gc.ca.This device meets RF exposure guidelines when used against the heador when positioned at least 1.5 centimetres (5/8 inch) away from thebody. When a carry case, belt clip or other form of device holder is used
for body-worn operation, it should not contain metal and should provideat least the above stated separation distance from the body.To send data or messages, a good connection to the network is needed.Sending may be delayed until such a connection is available. Follow theseparation distance instructions until the sending is finished.During general use, the SAR values are usually well below the valuesstated above. This is because, for purposes of system efficiency and tominimise interference on the network, the operating power of yourmobile is automatically decreased when full power is not needed for thecall. The lower the power output, the lower the SAR value.Device models may have different versions and more than one value.Component and design changes may occur over time and some changescould affect SAR values. The latest available SAR information for this andother Microsoft Mobile device models can be found atsar.microsoft.com.The World Health Organization (WHO) has stated that current scientificinformation does not indicate the need for any special precautions whenusing mobile devices. If you are interested in reducing your exposure,they recommend you limit your usage or use a hands-free kit to keepthe device away from your head and body. For more information andexplanations and discussions on RF exposure, go to the WHO website atwww.who.int/peh-emf/en.Copyrights and other noticesDeclaration of ConformityHereby, Microsoft Mobile Oy declares that this RM-1154 product is incompliance with the essential requirements and other relevantprovisions of Directive 1999/5/EC. A copy of the Declaration ofConformity can be found at www.microsoft.com/mobile/declaration-of-conformity.FCC/Industry Canada noticeThis device complies with part 15 of the FCC rules and Industry Canadalicence-exempt RSS standard(s). Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, includinginterference that may cause undesired operation. For more info, go totransition.fcc.gov/oet/rfsafety/rf-faqs.html. Any changes ormodifications not expressly approved by Microsoft Mobile could voidthe user's authority to operate this equipment.Note: This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipmentgenerates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one ormore of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.For the electronic labelling information, swipe down from the top of thescreen, and tap All settings > Extras > Advanced info. Labelling containsinformation such as the FCC ID, IC number, and device model.

Navigation menu