Microsoft RM-132 GSM 850/900/1800/1900MHz Cellphone w/BT User Manual R1108 en 9250265

Microsoft Mobile Oy GSM 850/900/1800/1900MHz Cellphone w/BT R1108 en 9250265

Manual

FCC DRAFTNokia N73 User Guide9250265ISSUE 1 EN
FCC DRAFTDECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION declares that this RM-132 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-of-life. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste.Copyright © 2006 Nokia. All rights reserved.Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.Nokia, Nokia Connecting People, Pop-Port, and Visual Radio are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners.Nokia tune is a sound mark of Nokia Corporation.This product includes software licensed from Symbian Software Ltd © 1998-2006. Symbian and Symbian OS are trademarks of Symbian Ltd.Java™ and all Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. Stac ®, LZS ®, ©1996, Stac, Inc., ©1994-1996 Microsoft Corporation. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Hi/fn ®, LZS ®,©1988-98, Hi/fn. Includes one or more U.S. Patents: No. 4701745, 5016009, 5126739, 5146221, and 5414425. Other patents pending.Part of the software in this product is © Copyright ANT Ltd. 1998. All rights reserved.US Patent No 5818437 and other pending patents. T9 text input software Copyright © 1997-2006. Tegic Communications, Inc. All rights reserved.This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial use in connection with information which has been encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any other use. Additional information, including that related to promotional, internal, and commercial uses, may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice.Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.The contents of this document are provided ‘as is’. Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia reserves the right to revise this document or withdraw it at any time without prior notice.The availability of particular products may vary by region. Please check with the Nokia dealer nearest to you.This device may contain commodities, technology, or software subject to export laws and regulations from the US and other countries. Diversion contrary to law is prohibited.FCC/INDUSTRY CANADA NOTICEYour device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's authority to operate this equipment.Issue 1 EN, 92502650434
FCC DRAFTContentsGet connected............................................6For your safety...........................................7Your Nokia N73...................................... 10Charge the battery..............................................................10Settings ..................................................................................10Transfer content from another device...........................10Essential indicators.............................................................11Volume and loudspeaker control ....................................12Multimedia key ....................................................................12Headset...................................................................................13Memory card tool................................................................13File manager .........................................................................14Download! .............................................................................15Games .....................................................................................15Support .................................................... 16Nokia support and contact information .......................16Help .........................................................................................16Tutorial ...................................................................................16Camera..................................................... 17Take pictures.........................................................................17Take pictures in a sequence .............................................22You in the picture—self-timer.........................................22Record videos .......................................................................23Gallery.......................................................26View and browse files........................................................26Albums ...................................................................................28Edit images ...........................................................................29Edit video clips.....................................................................30Slide show.............................................................................31Presentations........................................................................32Image print ...........................................................................32PrintOnline............................................................................33Online sharing......................................................................34Media applications ..................................37Music player .........................................................................37Flash Player...........................................................................38Visual Radio..........................................................................39RealPlayer..............................................................................41Movie director......................................................................43
Time management ...................................45Clock ....................................................................................... 45Calendar................................................................................. 46Messaging.................................................48Write text.............................................................................. 49Write and send messages.................................................50Inbox—receive messages................................................... 52Mailbox.................................................................................. 54View messages on a SIM card.........................................56Messaging settings............................................................. 56Contacts (Phonebook).............................61Save and edit names and numbers................................ 61Copy contacts ......................................................................62Add ringing tones for contacts....................................... 63Create contact groups....................................................... 63Make calls ................................................64Calls ........................................................................................ 64Answer or decline a call.................................................... 66Log........................................................................................... 67Web browsers...........................................70..................................................................................Services70Web......................................................................................... 73Connections..............................................76Bluetooth connectivity...................................................... 76Infrared connection............................................................79Data cable .............................................................................80PC connections ....................................................................80Connection manager..........................................................81Synchronization................................................................... 81Device manager...................................................................82Office........................................................83Calculator.............................................................................. 83Converter............................................................................... 83Notes ...................................................................................... 83Recorder................................................................................. 84Quickoffice............................................................................ 84Adobe Reader ....................................................................... 85Personalize your device...........................88Profiles—set tones...............................................................883-D tones...............................................................................89Change the look of your device ...................................... 90Active standby mode.......................................................... 91Tools..........................................................92Settings.................................................................................. 92Voice commands ...............................................................100
Application manager ....................................................... 101Digital Rights Management .......................................... 103Troubleshooting: Q&A.......................... 104Product safety....................................... 107Battery information......................................................... 107Nokia battery authentication guidelines....................108Care and maintenance.....................................................109Additional safety information .......................................110Technical Information......................................................114Additional safety information116
Get connected6FCC DRAFTGet connectedUse your device on the 2G network. See ‘About your device’, 8.Use Bluetooth technology, for example, to transfer files and connect to compatible enhancements. See ‘Bluetooth connectivity’, p. 76.Use infrared to transfer and synchronize data between compatible devices, for example. See ‘Infrared connection’, p. 79.Use Nokia Connectivity Cable CA-53 (provided in the standard sales package) to connect to compatible devices, such as printers and PCs. See ‘Data cable’, 80.Use Nokia miniSD card to transfer data or back up information, for example. See ‘Memory card tool’, 13.
7FCC DRAFTFor your safetyRead these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information.SWITCH ON SAFELY Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger.ROAD SAFETY COMES FIRST Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.INTERFERENCE All wireless devices may be susceptible to interference, which could affect performance.SWITCH OFF IN HOSPITALS Follow any restrictions. Switch the device off near medical equipment.SWITCH OFF IN AIRCRAFT Follow any restrictions. Wireless devices can cause interference in aircraft.SWITCH OFF WHEN REFUELING Do not use the device at a refueling point. Do not use near fuel or chemicals.SWITCH OFF NEAR BLASTING Follow any restrictions. Do not use the device where blasting is in progress. USE SENSIBLY Use only in the normal position as explained in the product documentation. Do not touch the antenna unnecessarily.QUALIFIED SERVICE Only qualified personnel may install or repair this product.ENHANCEMENTS AND BATTERIES Use only approved enhancements and batteries. Do not connect incompatible products.WATER-RESISTANCE Your device is not water-resistant. Keep it dry.BACK-UP COPIES Remember to make back-up copies or keep a written record of all important information.
8CONNECTING TO OTHER DEVICES When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.EMERGENCY CALLS Ensure the phone function of the device is switched on and in service. Press the end key as many times as needed to clear the display and return to the start screen. Enter the emergency number, then press the call key. Give your location. Do not end the call until given permission to do so.About your deviceThe wireless device described in this guide is approved for use on the EGSM 850/900/1800/1900 networks. Contact your service provider for more information about networks.Your device supports Internet connections and other methods of connectivity. Like computers, your device may be exposed to viruses, malicious messages and applications, and other harmful content. Exercise caution and open messages, accept connectivity requests, download content, and accept installations only from trustworthy sources. To increase the security of your device, consider installing an anti-virus software with a regular update service and use a firewall application.When using the features in this device, obey all laws, and respect privacy and legitimate rights of others. When taking and using images or video clips, obey all laws, and respect local customs as well as privacy and legitimate rights of others, including copyright.Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger.The Quickoffice applications in your device support common features of Microsoft Word, PowerPoint, and Excel (Microsoft Office 2000, XP, and 2003). Not all file formats can be viewed or modified.Network servicesTo use the phone you must have service from a wireless service provider. Many of the features in this device depend on features in the wireless network to function. These network services may not be available on all networks or you may have to make specific arrangements
9FCC DRAFTwith your service provider before you can utilize network services. Your service provider may need to give you additional instructions for their use and explain what charges will apply. Some networks may have limitations that affect how you can use network services. For instance, some networks may not support all language-dependent characters and services.Your service provider may have requested that certain features be disabled or not activated in your device. If so, they will not appear on your device menu. Your device may also have been specially configured. This configuration may include changes in menu names, menu order, and icons. Contact your service provider for more information.This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some features of this device, such as MMS, browsing, e-mail, and content downloading using the browser or over MMS, require network support for these technologies.For availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.Enhancements, batteries, and chargersAlways switch the device off, and disconnect the charger before removing the battery.Check the model number of any charger before use with this device. This device is intended for use when supplied with power from a DC-4, AC-3, or AC-4 charger and from an AC-1, ACP-7, ACP-8, ACP-9, ACP-12, LCH-9, or LCH-12 charger when used with the CA-44 charger adapter.The battery intended for use with this device is BP-6M. Warning: Use only batteries, chargers, and enhancements approved by Nokia for use with this particular model. The use of any other types may invalidate any approval or warranty and may be dangerous.For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
Your Nokia N7310FCC DRAFTYour Nokia N73Model number: Nokia N73-5Hereinafter referred to as Nokia N73.Charge the battery1Connect a compatible charger to a wall outlet.2Connect the power cord to the device. If the battery is completely discharged, it may take a while before the charging indicator starts scrolling.3When the battery is fully charged, disconnect the charger from the device, then from the wall outlet.SettingsYour Nokia N73 normally has MMS, GPRS, streaming, and mobile Internet settings automatically configured in the device, based upon your service provider or network operator information. You may have settings from your service providers already installed in your device, or you may receive the settings from the service providers as a special text message.Transfer content from another deviceYou can transfer content, such as contacts, free of charge from a compatible Nokia device to your Nokia N73 using Bluetooth connectivity or infrared. The type of content that can be transferred depends on the phone model. If the other device supports synchronization, you can also synchronize data between the other device and your Nokia N73.Copyright protections may prevent some images, music (including ringing tones), and other content from being copied, modified, transferred or forwarded.You can insert your SIM card in the other device. When Nokia N73 is switched on without a SIM card, the offline profile is automatically activated.Transfer content1To use the application for the first time, press  , and select Tools > Transfer. If you have used the application before and want to start a new transfer, select Transfer data.In the information view, select Continue.
Your Nokia N73112Select whether you want to use Bluetooth connectivity or infrared to transfer the data. Both devices must support the selected connection type.3If you select Bluetooth connectivity:To have Nokia N73 search for devices with Bluetooth connectivity, select Continue. Select your other device from the list. You are asked to enter a code on your Nokia N73. Enter a code (1-16 digits), and select OK. Enter the same code on the other device, and select OK. The devices are now paired. See ‘Pair devices’, p. 78.For some phone models, the Transfer application is sent to the other device as a message. To install Transfer on the other device, open the message, and follow the instructions on the display.If you select infrared, connect the two devices. See ‘Infrared connection’, p. 79.4From your Nokia N73, select the content you want to transfer from the other device.Content is transferred from the memory of the other device to the corresponding location in your Nokia N73. Transferring time depends on the amount of data to be transferred. You can cancel transferring and continue later.If the other device supports synchronization, you can keep the data up-to-date in both devices. To start a synchronization with a compatible Nokia device, select Phones, scroll to the device, and select Options > Synchronize. Follow the instructions on the display.To view the log of a previous transfer, select Transfer log.Essential indicators The device is being used in a GSM network. You have one or more unread messages in the Inbox folder in Messag.. You have received new e-mail in the remote mailbox. There are messages waiting to be sent in the Outbox folder. You have missed calls. Shown if Ringing type is set to Silent and Message alert tone, IM alert tone, and E-mail alert tone are set to Off. The device keypad is locked. A clock alarm is active. The second phone line is being used (network service). All calls to the device are forwarded to another number. If you have two phone lines (network service), the indicator for the first line is   and for the second .
Your Nokia N7312FCC DRAFT A compatible headset is connected to the device. The connection to a compatible headset with Bluetooth connectivity has been lost. A compatible loopset is connected to the device. A compatible TTY is connected to the device. A data call is active.  A GPRS or EDGE packet data connection is available. A GPRS or EDGE packet data connection is active.  A GPRS or EDGE packet data connection is on hold. Bluetooth connectivity is on. Data is being transmitted using Bluetooth connectivity. A USB connection is active. An infrared connection is active. If the indicator is blinking, the device is trying to connect to the other device or the connection has been lost.Volume and loudspeaker controlTo increase or decrease the volume level when you have an active call or are listening to a sound, press the volume key.The built-in loudspeaker allows you to speak and listen from a short distance without having to hold the device to your ear. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. To use the loudspeaker during a call, select Options > Activate loudsp..To turn off the loudspeaker, select Options > Activate handset.Multimedia keyWith the Multimedia key, you have a quick access to multimedia content and predefined applications.To open the shortcut assigned to the multimedia key, press and hold  . To open a list of multimedia applications, press  . To open the desired application, use the scroll key. To exit the list without selecting an application, press .To change the shortcuts, press  , and  . To change the applications that are shown when you press  , select Top, Left, Middle, and Right and the application.Some shortcuts may be fixed, and you are not able to change them.
Your Nokia N7313HeadsetConnect a compatible headset to the Pop-PortTM connector of your device. Warning: When you use the headset, your ability to hear outside sounds may be affected. Do not use the headset where it can endanger your safety. Memory card toolUse only miniSD cards approved by Nokia for use with this device. Nokia utilizes the approved industry standards for memory cards but not all other brands may function correctly or be fully compatible with this device.Use only compatible miniSD cards with this device. Other memory cards, such as Reduced Size MultiMediaCards, do not fit in the memory card slot and are not compatible with this device. Using an incompatible memory card may damage the memory card as well as the device, and data stored on the incompatible card may be corrupted.Press , and select Tools > Memory. You can use a compatible miniSD card as extra storage space and for backing up the information in the device memory.To back up information from the device memory to a compatible memory card, select Options > Backup phone mem.To restore information from the compatible memory card to the device memory, select Options > Restore from card.To eject the memory card, press  , and select Remove mem. card. Important: Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the card may be corrupted.Set a passwordTo set a password to protect your memory card, select Options >Set password. You can use up to 8 characters in the password.To change the password, select Options > Change password. To remove the password, select Options > Remove password.
Your Nokia N7314FCC DRAFTFormat a memory cardWhen a memory card is reformatted, all data on the card is permanently lost.Some memory cards are supplied preformatted and others require formatting. Consult your retailer to find out if you must format the memory card before you can use it.To format a memory card, select Options > Format mem. card. Select Yes to confirm.File managerMany features of the device, such as contacts, messages, images, videos, ringing tones, calendar notes, documents, and downloaded applications, use memory to store data. The free memory available depends on how much data is already saved in the device memory.You can use a compatible memory card as extra storage space. Memory cards are rewritable, so you can delete old information and save new data on a memory card.To browse files and folders in the device memory or on a memory card (if inserted), press  , and select Tools > File mgr.. The device memory view ( ) opens. Press   to open the memory card view ( ), if available.To move or copy files to a folder, press   and   at the same time to mark a file, and select Options > Move to folder or Copy to folder.To find a file, select Options > Find and the memory from which to search, and enter a search text that matches the file name.View memory consumption To view what types of data you have in the device and how much memory the different data types consume, select Options > Memory details. The amount of available free memory is shown in Free memory.Memory low—free memoryThe device notifies you if the device or the memory card memory is low.To free device memory, transfer data to a compatible memory card, if you have one. Mark files to be moved, and select Move to folder > Memory card, and a folder. Tip! You can use Nokia Phone Browser available in Nokia PC Suite to view the different memories in your device and transfer data.To remove data to free memory, use File mgr., or go to the respective application. For example, you can remove the following:
Your Nokia N7315• Messages from Inbox, Drafts, and Sent folders in Messag.• Retrieved e-mail messages from the device memory• Saved Web pages• Saved images, videos, or sound files• Contact information•Calendar notes• Downloaded applications. See also ‘Application manager’, p. 101.• Any other data that you no longer needDownload!Download! (network service) is a mobile content shop available on your device. You can browse, download, and install items, such as applications and media files, to your device from the Internet. The items are categorized under catalogs and folders provided by different service providers. Some items may be chargeable, but you can usually preview them free of charge.Press , and select Download!For details, see the Additional applications leaflet.GamesPress  , and select Games and a game. For instructions on how to play the game, select Options > Help.
Support16FCC DRAFTSupportNokia support and contact informationCheck www.nokiausa.com/support or your local Nokia Web site for the latest version of this guide, additional information, downloads, and services related to your Nokia product.On the Web site, you can get information on the use of Nokia products and services. If you need to contact customer service, check the list of local Nokia contact centers at www.nokiausa.com/support.For maintenance services, check your nearest Nokia service center at www.nokiausa.com/support.HelpYour device has context-sensitive help. When an application is open, select Options > Help to access help for the current view.When you are reading the instructions, to switch between help and the application that is open in the background, press and hold  .To open help from the main menu, select Applications > Help. Select the desired application to view its help topics.TutorialThe tutorial gives you information about some of the features of your device. To access the tutorial in the menu, press  , and select Applications > Tutorial and the section you want to view.
Camera17FCC DRAFTCameraYour Nokia N73 has a high resolution camera on the back of the device. You can use the camera to take still pictures and record videos. The camera is landscape mode. The Nokia N73 device supports an image capture resolution of 2048x1536 pixels. The image resolution may appear different.The images and video clips are automatically saved in the Imgs. & video folder in Gallery. The camera produces .jpeg images. Video clips are recorded in the .mp4 file format, or in the 3GPP file format with the .3gp file extension (Sharing quality). See ‘Video settings’, p. 24.You can send images and video clips in a multimedia message, as an e-mail attachment, or by using Bluetooth connectivity. You can also upload them to your online album. See ‘Online sharing’, p. 34.Take picturesWhen taking a picture, note the following:• Use both hands to keep the camera still.• The quality of a digitally zoomed picture is lower than that of a nonzoomed picture.• The camera goes into the battery saving mode if there are no keypresses for a moment. To continue taking pictures, press  .To take a picture, do the following:1To activate the camera, open the slide. If the camera is in Video mode, select Image mode from the active toolbar.2To lock the focus on an object, press the capture key halfway down. The green locked focus indicator appears on the display. If the focus was not locked, the red focus indicator appears. Release the capture key, and press it halfway down again. You can, however, take the picture without locking the focus.3To take a picture, press the capture key. Do not move the device before the image is saved. To zoom in or out, use the zoom key on the side of your device.You can make lighting and color adjustments before taking a picture by using the scroll key to scroll through
Camera18the active toolbar. See ‘Setup settings—Adjust color and lighting’, p. 21.Saving the captured image may take longer if you change the zoom, lighting, or color settings.To free memory before taking a picture, select Options > Go to free memory (only available if you have backed up images or video clips). See ‘Free memory’, p. 28.To activate the camera, select Options > Use secondary camera.To close the camera, close the slide.Still image camera indicatorsThe still image camera viewfinder displays the following:• The current capture mode indicator (1).• The active toolbar (2), which you can scroll through before capturing the image to activate the self-timer or sequence mode, or select the capturing mode, scene, flash mode, white balance, exposure compensation, color tone, and light sensitivity (the active toolbar is not displayed during focus and image capture). See ‘Active toolbar’, p. 19.•The image resolution indicator (3) indicates whether the quality of the image is Print 3M - Large (2048x1536 resolution), Print 2M - Medium (1600x1200 resolution), Print/e-mail 0.8M - Small (1280x960 resolution), or Multimedia message 0.3M (640x480 resolution).• The image counter (4) displays the estimated number of images you can capture using the current image quality setting and memory in use (the counter is not displayed during focus and image capture).• The device memory ( ) and memory card ( ) indicators (5) show where images are saved.To display all viewfinder indicators, select Options > Show icons. To display only the camera status indicators, select Hide icons.
Camera19FCC DRAFTActive toolbarIn the camera, you can use active toolbar as a shortcut to select items and adjust different settings before and after taking a picture or recording a video. In the active toolbar, scroll to different items, and select them by pressing the scroll key. The available options vary depending on the capture mode and state you are in. You can also define whether the active toolbar is always visible on the display or activated by a key press.If you want the active toolbar to be visible on the display before and after taking a picture or recording a video, select Options > Show icons.If you want the active toolbar to be visible only a while when you need it, select Options > Hide icons. You can activate the active toolbar by pressing the scroll key.Before taking a picture or recording a video, in the active toolbar, select from the following: to switch between the video and image modes to select the scene to select the flash mode to activate the self-timer (images only). See ‘You in the picture—self-timer’, p. 22. to activate the sequence mode (images only). See ‘Take pictures in a sequence’, p. 22. to adjust the exposure compensation (images only) to adjust white balance to select a color effect to adjust light sensitivityThe icons change to reflect the current status of the setting.The available options may vary depending on the view you are in.See also active toolbar options in ‘After taking a picture’, p. 19, ‘After recording a video’, p. 24, and ‘Active toolbar’, p. 27 in Gallery.After taking a pictureAfter you take the picture, select the following from the active toolbar (available only if Show captured image is set to Yes in Still image camera settings):• If you do not want to keep the image, select Delete.
Camera20• To send the image using multimedia, e-mail, Bluetooth connectivity, or infrared, or upload it to your online album, press the call key, or select Send. For more information, see ‘Messaging’, p. 48, ‘Bluetooth connectivity’, p. 76, and ‘Online sharing’, p. 34. This option is not available during an active call. • To tag images to the Print Basket for later printing, select Add to Print Basket.• To print the picture, select Print. See ‘Image print’, p. 32.• To capture a new image, select New image.To rename the image, select Options > Rename image.To use the picture as wallpaper in the active standby, select Options > Set as wallpaper.To set the image as a call image for a contact, select Set as contact call img..Still image camera settingsThere are two kinds of settings for the still image camera: Image setup and main settings. To adjust Image setup, see ‘Setup settings—Adjust color and lighting’, p. 21. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following:Image quality—Print 3M - Large-Large (2048x1536 resolution), Print 2M - Medium (1600x1200 resolution), Print/e-mail 0.8M - Small (1280x960 resolution), or Multimedia message 0.3M (640x480 resolution). The better the image quality, the more memory the image consumes. If you want to print the image, select Print 3M - Large, Print 2M - Medium, or Print/e-mail 0.8M - Small. If you want to send it through e-mail, select Print/e-mail 0.8M - Small. To send the image through MMS, select Multimedia message 0.3M.Add to album—Select whether you want to save the image to a certain album in the gallery. If you select Yes, a list of available albums opens.Show captured image—Select Yes if you want to see the captured image after it is taken, or No if you want to continue taking pictures immediately.Default image name—Define the default name for the captured images.Extended digital zoom—Select On to allow the zoom increments to be smooth and continuous between digital and extended digital zoom. If you want to limit the zoom to where the selected image quality is maintained, select Off.Capture tone—Select the tone you want to hear when you take a picture.Memory in use—Select where to store your images.
Camera21FCC DRAFTRestore camera settings—Select OK to return the default values to the camera settings.FlashThe flash is available only in the main camera.Keep a safe distance when using the flash. Do not use the flash on people or animals at close range. Do not cover the flash while taking a picture.The camera has an LED flash for low light conditions. The following flash modes are available for the still image camera: Automatic (), Red eye reduct. (), On (), and Off ( ); and for the video recorder: Video light on ().To change the flash mode, in the active toolbar, select the desired flash mode.Setup settings—Adjust color and lightingTo enable the camera to reproduce colors and lighting more accurately, or to add effects to your pictures or videos, use the scroll key to scroll through the active toolbar, and select from the following options:White balance—Select the current lighting condition from the list. This allows the camera to reproduce colors more accurately.Exposure compensation (images only)—Adjust the exposure time of the camera.Color tone—Select a color effect from the list.Light sensitivity (images only)—Select the light sensitivity of the camera. The darker the environment, the higher the light sensitivity should be.The screen display changes to match any settings you make, so that you see how the change affects the pictures or videos.The setup settings transfer between the image and video modes. The setup settings return to the default settings when you close the camera.If you select a new scene, the color and lighting settings are replaced by the selected scene. See ‘Scenes’, p. 21. You can change the setup settings after selecting a scene if needed.ScenesA scene helps you to find the right color and lighting settings for the current environment. Select a proper scene for taking pictures or recording video clips from the
Camera22scene list. The settings of each scene have been set according to a certain style or environment. Use the scroll key to scroll through the active toolbar, and select from the following options:Video scenesAutomatic ( )(default) and Night ()Image scenesAuto () (default), User defined (), Close-up mode(), Portrait (), Landscape (), Sports (), Night (), and Night portrait ().When you take pictures, the default scene is Auto. You can select the User defined scene as the default scene.To make your own scene suitable for a certain environment, scroll to User defined, and select Options > Change. In the user defined scene you can adjust different lighting and color settings. To copy the settings of another scene, select Based on scene mode and the desired scene.Take pictures in a sequenceTo set the camera to take six pictures or more in a sequence (if enough memory available), in the active toolbar, select Switch to sequence mode. To take six pictures, press the capture key. To take more than six pictures, press and hold the capture key. To stop taking pictures, release the capture key. You can capture up to 100 images, depending on the available memory.After you take the pictures, they are shown in a grid on the display. To view a picture, press   to open it.You can also use the sequence mode with the self-timer. When using the self-timer, the maximum amount of pictures is six pictures.To return to the sequence mode viewfinder, press the capture key.You in the picture—self-timerUse the self-timer to delay the capture so that you can include yourself in the picture. To set the self-timer delay, in the active toolbar, select Self timer > 2 seconds, 10 seconds, or 20 seconds. To activate the self-timer, select Activate. The self-timer indicator ( ) blinks and the device beeps when the timer is running. The camera takes the picture after the selected delay elapses. To switch off Self timer, in the active toolbar, select Self timer > Off.You can also use the self-timer in the sequence mode. Tip! In the active toolbar, select Self timer > 2 seconds to keep your hand steady when taking a picture.
Camera23FCC DRAFTRecord videos1To activate the camera, open the slide. If the camera is in the Image mode, select Video mode from the active toolbar. 2Press the capture key to start recording. In the portrait mode, use the scroll key for recording. The red record icon   is shown and a tone sounds, indicating that recording has started. 3Select Stop to stop recording. The video clip is automatically saved to the Imgs. & video folder of Gallery. See ‘Gallery’, p. 26. The maximum length of the video is 60 minutes (if enough memory available).To pause recording at any time, press Pause. The pause icon ( ) blinks on the display. Video recording automatically stops if recording is set to pause and there are no keypresses within a minute. Press the capture key again to resume recording.To zoom in or out of the subject, press the zoom key on the side of the device.To make lighting and color adjustments before recording a video, use the scroll key to scroll through the active toolbar. See ‘Setup settings—Adjust color and lighting’, p. 21 and ‘Scenes’, p. 21.To free memory before recording a video, select Options > Go to free memory (only available if you have backed up images or video clips). See ‘Free memory’, p. 28.Video capture indicatorsThe video viewfinder displays the following:• The current capture mode indicator (1).• The audio mute on indicator (2).• The active toolbar (3), which you can scroll through before recording to select the scene, white balance, and color tone (the toolbar is not displayed during recording).• The total available video recording time (4). When you are recording, the current video length indicator also shows the elapsed time and time remaining.•The device memory ( ) and memory card () indicators (5) show where videos are saved.• The video quality indicator (6) indicates whether the quality of the video is High, Normal, or Sharing.• The video clip file type (7).
Camera24To display all viewfinder indicators, select Options > Show icons. Select Hide icons to display only the video status indicators, and during the recording, the available record time, zoom bar when zooming, and the selection keys.After recording a videoAfter you record a video clip, select the following from the active toolbar (available only if Show captured video is set to Yes in Video settings):• To immediately play the video clip you just recorded, select Play.• If you do not want to keep the video, select Delete.• To send the video clip using multimedia, e-mail, Bluetooth connectivity, or infrared, or upload it to your online album, press the call key, or select Send. For more information, see ‘Messaging’, p. 48, ‘Bluetooth connectivity’, p. 76, and ‘Online sharing’, p. 34. This option is not available during an active call. You cannot send video clips saved in the .mp4 file format in a multimedia message. • To record a new video clip, select New video.To rename the video, select Options > Rename video.Video settingsThere are two kinds of settings for the video recorder: Video setup and main settings. To adjust Video setup settings, see ‘Setup settings—Adjust color and lighting’, p. 21. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To change the main settings, select Options > Settings and from the following:Video quality—Set the quality of the video clip to High (best quality for long term usage and playback on a compatible TV or PC and handset), Normal (standard quality for playback through your handset), or Sharing (limited video clip size to send using multimedia message). If you want to view the video on a compatible TV or PC, select High, which has CIF resolution (640x480) and the .mp4 file format. You cannot send video clips saved in the .mp4 file format in a multimedia message. To send the video clip through MMS, select Sharing (QCIF resolution, .3gp file format). The size of the video clip recorded with Sharing is limited to 300 KB (about 20 seconds in duration) so that it can be conveniently sent as a multimedia message to a compatible device.Video stabilization—Select On to reduce camera shake when recording the video.
Camera25FCC DRAFTAudio recording—Select On if you want to record both image and sound.Add to album—Select whether you want to add the recorded video clip to a certain album in Gallery. Select Yes to open a list of available albums.Show captured video—Select whether you want the first frame of the recorded video clip to be shown on the display after the recording stops. Select Play from the active toolbar (main camera) or Options > Play (secondary camera) to view the video clip.Default video name—Define the default name for the captured video clips.Memory in use—Define the default memory store: device memory or memory card (if inserted).Restore camera settings—Select OK to return the default values to the camera settings.
Gallery26FCC DRAFTGalleryTo store and organize your images, video clips, sound clips, playlists, and streaming links, press  , and select Gallery. Tip! If you are in another application, to view the last stored picture in Gallery, press the review key  on the side of your device. To enter the Images & video folder main view, press the review key again.View and browse filesSelect Images & video  , Tracks  , Sound clips  , Streaming links  , Presentations , or All files  , and press   to open it.You can browse and open folders; and mark, copy, and move items to folders. You can also create albums; and mark, copy, and add items to albums. See ‘Albums’, p. 28.Files stored on your compatible memory card (if inserted) are indicated with  .To open a file, press  . Video clips, .ram files, and streaming links are opened and played in RealPlayer, and music and sound clips in Music player. See ‘RealPlayer’, p. 41, and ‘Music player’, p. 37.To copy or move files to the memory card (if inserted) or to device memory, select a file and Options > Move and copy > Copy to memory card or Move to memory card, or Copy to phone mem. or Move to phone mem.. To download tracks or sound clips into Gallery using the browser, in the Tracks or Sound clips folders, select Track downl., or Sound downl.. To download images or videos, in the Images & video folder, select the download icon. The browser opens, and you can select a bookmark from which the site can download.Images and video clipsPictures taken and video clips recorded with the camera are stored in the Images & video folder in Gallery. Images and video clips can also be sent to you in a multimedia message, as an e-mail attachment, through Bluetooth connectivity, or by using infrared. To be able to view a
Gallery27received image or video clip in Gallery or in the media player, you must save it in the device memory or on a memory card (if inserted).Open the Images & video folder in Gallery. The images and video clip files are in a loop, and ordered by date. The number of files is displayed. To browse the files one by one, scroll left or right. To browse files in groups, scroll up or down.When the image is opened, to zoom in an image, press the zoom key on the side of your device. The zooming ratio is shown on the lower left part of the display. The zooming ratio is not stored permanently.To rotate the selected image left or right, select Options > Rotate.To edit a video clip or a photo, select Options > Edit. An image editor or a video editor opens. See ‘Edit video clips’, p. 30. See ‘Edit images’, p. 29. To create custom video clips, select a video clip or several clips in the gallery, and select Options > Edit. See ‘Edit video clips’, p. 30.To print your images on a compatible printer, or to store them on your memory card (if inserted) for printing, select Options > Print. See ‘Image print’, p. 32. You can also tag images for later printing to the Print Basket in Gallery. See ‘Print Basket’, p. 28.To add an image or a video clip to an album in the gallery, select Options > Albums > Add to album. See ‘Albums’, p. 28.To use the picture as a background image, select the picture and Options >Use image > Set as wallpaper.To delete an image or video clip, press  . Active toolbarIn the Images & video folder, you can use active toolbar as a shortcut to select different tasks. The active toolbar is available only when you have selected an image or a video clip. In the active toolbar, scroll up or down to different items, and select them by pressing the scroll key. The available options vary depending on the state you are in and on whether you have selected an image or a video clip. You can also define whether the active toolbar is always visible on the display or activated by a key press.If you want the active toolbar to be visible on the display, select Options > Show icons.If you want the active toolbar to be visible only a while when you need it, select Options > Hide icons. To activate the active toolbar, press the scroll key.Select from the following:
Gallery28FCC DRAFT to play the selected video clip to send the selected image or video clip /   to add or remove an image from the Print Basket. See ‘Print Basket’, p. 28.  to view the images in the Print basket to start a slide show of the images in the selected album to delete the selected image or video clip to print the viewed image to reduce the resolution of the selected image to free memory for new images. See ‘Free memory’, p. 28.The available options may vary depending on the view you are in.Free memoryTo reduce the resolution and file size of images saved in Gallery and free memory for new pictures, select Options > Shrink. To back up the images first, copy them to a compatible PC or other location. Selecting Shrink reduces the resolution of an image to 640x480.To increase free memory space after you have copied items to other locations or devices, select Options > Free memory. You can browse a list of files you have copied. To remove a copied file from Gallery, select Options > Delete.Print BasketYou can tag images to the Print Basket, and print them later with a compatible printer or in a compatible printing kiosk, if available. See ‘Image print’, p. 32. The tagged images are indicated with   in the Images & video folder and albums.To tag an image for later printing, select an image, and Add to Print Basket from the active toolbar.To view the images in the Print Basket, select View Print Basket from the active toolbar, or select the Print Basket icon   from the Images & video folder (available only when you have added pictures to the Print Basket).To remove an image from the Print Basket, select an image in the Images & video folder or in an album, and Remove from print from the active toolbar.AlbumsWith albums you can conveniently manage your images and video clips. To view the albums list, in the Images & video folder, select Options > Albums > View albums. To add a picture or a video clip to an album in the gallery, scroll to a picture or video clip, and select Options >
Gallery29Albums > Add to album. A list of albums opens. Select the album to which you want to add the picture or video clip, and press  .To remove a file from an album, press  . The file is not deleted from the Images & video folder in Gallery.To create a new album, in the albums list view, select Options > New album.Edit imagesTo edit the pictures after taking them, or the ones already saved in Gallery, select Options > Edit. Select Options > Apply effect to open a grid where you can select different edit options indicated by small icons. You can crop and rotate the image; adjust the brightness, color, contrast, and resolution; and add effects, text, clip art, or a frame to the picture.Crop imageTo crop an image, select Options > Apply effect > Crop. To crop the image size manually, select Manual or select a predefined aspect ratio from the list. If you select Manual, a cross appears in the upper left corner of the image. Move the scroll key to select the area to crop, and select Set. Another cross appears in the lower right corner. Again select the area to be cropped. To adjust the first selected area, select Back. The selected areas form a rectangle, which forms the cropped image.If you selected a predefined aspect ratio, select the upper left corner of the area to be cropped. To resize the highlighted area, use the scroll key. To freeze the selected area, press  . To move the area within the picture, use the scroll key. To select the area to be cropped, press  .Reduce rednessTo reduce redness of the eyes in an image, select Options > Apply effect > Red eye reduction. Move the cross onto the eye, and press  . A loop appears on the display. To resize the loop to fit the size of the eye, move the scroll key. To reduce the redness, press  .Useful shortcutsShortcuts in the image editor:• To view an image in the full screen, press  . To return to the normal view, press   again.• To rotate an image clockwise or counterclockwise, press  or  .• To zoom in or out, press   or  .• To move on a zoomed image, scroll up, down, left, or right.
Gallery30FCC DRAFTEdit video clipsTo edit video clips in Gallery and create custom video clips, scroll to a video clip, and select Options > Edit > Merge, Add sound, Add text, or Cut. See ‘Gallery’, p. 26. Tip! You can use Movie director to create custom video clips. Select the video clips and images you want to create a muvee with and select Options > Edit > Create muvee. See ‘Movie director’, p. 43.The video editor supports video file formats 3gp and .mp4, and sound file formats .aac, .amr, .mp3 and .wav.The custom video clips are automatically saved in the Images & video in Gallery. The clips are saved on the memory card. If the memory card is not available, the device memory is used.Add images, video, sound, and textYou can add images, video clips, and text to a video clip selected in Gallery to create custom video clips.To combine an image or a video clip with the selected video clip, in the Images & video folder, select Options> Edit > Merge > Image or Video clip. Select the desired file, and press Select.To add a new sound clip and replace the original sound clip in the video clip, select Options> Edit > Add sound and a sound clip. To add text to the beginning or the end of the video clip, select Options > Edit > Add text to:, enter the text you want to add, and press OK. Then select where you want to add the text: Beginning or End.Cut video clipYou can trim the video clip, and add start and end marks to exclude parts from the video clip. In the Images & video folder, select Options > Edit > Cut.To play the selected video clip from the start, select Options > Play.Tip! To take a snapshot of a video clip, press the edit key.To select which parts of the video clip are included in the custom video clip, and define the start and end points for them, scroll to the desired point on the video, and select Options > Start mark or End mark. To edit the start or end point of the selected part, scroll to the desired mark, and press the scroll key. You can then move the selected mark forwards or backwards on the timeline.To remove all the marks, select Options > Remove > All marks.
Gallery31To preview the video clip, select Options > Play marked section. To move on the timeline, scroll left or right.To stop playing the video clip, press Pause. To continue playing the clip, select Options > Play. To return back to the cut video view, press Back.To save the changes, and return to Gallery, press Done.Send videosTo send the video, select Options > Send > Via multimedia, Via e-mail, Via Bluetooth, Via infrared, or Upload. Contact your network operator or service provider for details of the maximum multimedia message size that you can send. If your video is too large to send in a multimedia message,   appears. Tip! If you want to send a video clip that is over the maximum multimedia message size allowed by your service provider, you can send the clip using Bluetooth wireless technology. See ‘Send data using Bluetooth connectivity’, p. 78. You can also transfer your videos to a compatible PC using Bluetooth connectivity, a USB data cable, or by using a compatible memory card reader enhancement (sold separately).Slide showIn the active toolbar, select Slide show to view a slide show of images in full screen. The slide show starts from the selected file. Select from the following:•Pause—to pause the slide show•Continue—to resume the slide show, if paused•End—to close the slide showTo browse the images, press   (previous) or   (next) (available only when Zoom and pan is off).To adjust the tempo of the slide show, before starting the slide show, select Options > Slide show > Settings > Delay between slides.To make the slide show move smoothly from one slide to another, and let the gallery randomly zoom in and out in the images, select Zoom and pan.To add sound to the slide show, select Options > Slide show > Settings and from the following:•Music—Select On or Off.•Track—Select a music file from the list.To decrease or increase the volume, use the volume key on the side of your device.
Gallery32FCC DRAFTPresentationsWith presentations, you can view SVG (scalable vector graphics) files, such as cartoons and maps. SVG images maintain their appearance when printed or viewed with different screen sizes and resolutions. To view SVG files, select the Presentations folder, scroll to an image, and select Options > Play. To zoom in, press  . To zoom out, press  .To switch between full screen and normal screen, press .Image printTo print images with Image print, select the image you want to print, and the print option in the gallery, camera, image editor, or image viewer.Use Image print to print your images using the USB data cable supplied with your device, Bluetooth connectivity, or a compatible memory card (if available).You can only print images that are in .jpeg format. The pictures taken with the camera are automatically saved in .jpeg format.To print to a printer compatible with PictBridge, connect the data cable before you select the print option.Printer selectionWhen you use Image print for the first time, a list of available compatible printers is displayed after you select the image. Select a printer. The printer is set as the default printer.If you have connected a printer compatible with PictBridge using Nokia Connectivity Cable CA-53, the printer is automatically displayed.If the default printer is not available, a list of available printing devices is displayed.To change the default printer, select Options > Settings > Default printer.Print previewThe print preview view opens only when you start printing an image in the gallery.The selected images are displayed using predefined layouts. To change the layout, scroll left and right through the available layouts for the selected printer. If the images do not fit on a single page, scroll up or down to display the additional pages.
Gallery33Print settingsThe available options vary, depending on the capabilities of the printing device you selected.To set a default printer, select Options > Default printer.To select the paper size, select Paper size, the size of paper from the list, and OK. Select Cancel to return to the previous view.PrintOnline Note: The availability of this service may vary according to your country or sales area, and the service may only be available in a limited number of languages.With the PrintOnline application you can order prints of your images online directly to your home, or to a store where you can pick them up. You can also order different products with the selected image, such as mugs or mouse pads. The available products depend on the service provider.In order to use PrintOnline, you must have at least one printing service configuration file installed. The files can be obtained from printing service providers that support PrintOnline.You will be charged data costs for sending your images to the service. The costs may increase when you are sending images for uploading while you are roaming outside your home operator network. See ‘Network’, p. 99 for roaming.Order printsYou can only print images that are in .jpeg format.Press , and select Gallery > Images & video.1Select an image or images in Gallery, and Options > Print > Order prints.2Select a service provider from the list.3Select Options and from the following:Open to start the connection to the service provider.Info to view information about the service provider, for example, the address of a store, contact details, and Web links to more information on the service provider.Remove to remove the service provider from the list.Log to view the details of the previous orders.4If the service provided is a single shop service, you are connected to the service provider, and the images preview view displays the images you selected in Gallery. Select Options and from the following:Preview to view the image before ordering a print. Scroll up or down to view the images.Order now to submit your order.Change product order to adjust the product details and number of copies for the selected image. In the product order view, you can select which product and
Gallery34FCC DRAFTof what type you want to order. The available options and products vary depending on the service provider.Scroll left or right to view and change the image details of the other images.Change customer info to change the customer and order information.Add image to add more images to the order.Remove image to remove images from the order.5If the service offered is a retailer group service, you are connected to the service provider, and need to select a store from where you want to collect your prints. The images preview view displays the images you selected in Gallery. Depending on the service provider, you may have options for browsing and searching stores with different search criteria.You can check details, such as opening hours of the selected store, by selecting Options > Info (if provided by the service provider).Scroll to the desired retail pick up point, and press the scroll key. You can preview the images before ordering, change image details or customer information, or add or remove images from the order. To order the prints, select Options > Order now.Online sharing Note: The availability of this service may vary according to your country or sales area, and the service may only be available in a limited number of languages.With the Online sharing application, you can share your images and videos in online albums, weblogs, or in other online sharing services on the Web. You can upload content, save unfinished posts as drafts and continue later, and view the content of the albums. The supported content types may vary depending on the service provider.Get startedTo use Online sharing, you must subscribe to the service with an online image sharing service provider. You can usually subscribe to the service on the Web page of the service provider. Contact your service provider for details on subscribing to the service. For more information on compatible service providers, see www.nokiausa.com/support.When you open the service for the first time in the Online sharing application, you are prompted to create a new account and define the user name and password for it. You can access the account settings later through Options > Settings in the Online sharing application. See ‘Online sharing settings’, p. 35.
Gallery35Upload filesPress , and select Gallery > Images & video, the files you want to upload, and Options > Send > Web upload. You can access the Online sharing application also from the camera.The Select service view opens. To create a new account for a service, select Options > Add new account or the service icon with the text Create account in the services list. If you have created a new account offline, or modified an account or service settings through a Web browser on a compatible PC, to update the services list in your device, select Options > Retrieve services. To select a service, press the scroll key.When you select the service, the selected images and videos are shown in the edit state. You can open and view the files, reorganize them, add text to them, or add new files.To cancel the Web upload process, and save the created post as a draft, select Back > Save as draft. If the uploading has already started, select Cancel > Save as draft.To connect to the service and upload the files to the Web, select Options > Upload, or press  .Open online serviceTo view uploaded images and videos in the online service, and draft and sent entries in your device, in the Images & video folder, select Options > Open online service. If you have created a new account offline, or modified an account or service settings through a Web browser on a compatible PC, to update the services list in your device, select Options > Retrieve services. Select a service from the list.After you open a service, select from the following:•Open in Web browser—to connect to the selected service and view the uploaded and draft albums in the Web browser. The view may vary depending on the service provider.•Drafts—to view and edit the draft entries, and upload them to the Web•Sent—to view the 20 latest entries created through your device•New post—to create a new entryThe available options may vary depending on the service provider.Online sharing settingsTo edit the Online sharing settings, in the Online sharing application, select Options > Settings.
Gallery36FCC DRAFTMy accountsIn My accounts, you can create new accounts or edit existing accounts. To create a new account, select Options> Add new account. To edit an existing account, select an account and Options > Edit. Select from the following:Account name—to enter the desired name for the accountService provider—to select the service provider you want to use. You cannot change the service provider for an existing account, you must create a new account for the new service provider. If you delete an account in My accounts, the services related to the account are also deleted from you device, including the sent items for the service.User name and Password—to enter the user name and password you created for your account when you registered to the online serviceUpload image size—to select the size in which the images are uploaded to the serviceApplication settingsDisplay image size—to select the size in which the image is shown on the display of your device. This setting does not affect the upload image size.Display text size—to select the font size used to display text in draft and sent entries, or when you add or edit text to a new entryAdvancedService providers—to view or edit service provider settings, add a new service provider, or view details of a service provider. If you change the service provider, all the My accounts information for the previous service provider is lost. You cannot change the settings of predefined service providers.Default access point—to change the access point used to connect to the online service, select the access point you want.
Media applications37FCC DRAFTMedia applicationsMusic playerPress  , and select Music player. With the music player, you can play music files and create and listen to playlists. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.Add musicWhen you open the music player for the first time, the player searches the device memory for music files to create a music library.After you add or remove music files in the device, update your music library. Select Options > Music library > Options > Update Music library. Tip! You can transfer music files from your device to a compatible memory card (if inserted) with Nokia Audio Manager available in Nokia PC Suite.Play musicWhen you open the music player, the previously played track or playlist is displayed. To view the music library, select  or Options > Music library and the desired song list. To start playing the songs in the view, select Options > Play.When a song is playing, to change between play and pause, press   or  .To stop a song, press  . To fast forward or rewind, press and hold   or  . To start playing the next or previous song, press  or .To view the currently played song list, select   or Options > Open 'Now playing'. To save the song list as a playlist, select Options > Add to track list, and create a new playlist, or select a saved playlist.To adjust the volume, use the volume key on the side of your device.
Media applications38To select between random play and normal play mode, select Options > Random play. To select whether playing stops at the end of the playlist or restarts from its beginning, select Options > Loop. Tip! To leave the application open and music playing in the background, press   twice to return to the standby mode. To return to the application, press  , and select Music player.To open your Web bookmarks for downloading music, select Options > Track downloads.To return to the standby mode and leave the music playing in the background, select Options > Play in background.Music libraryTo view the music library, select Options > Music library. All tracks lists all music. To view sorted songs, select Albums, Artists, Genres, or Composers. The album, artist, genre, and composer information is collected from the ID3 or M4A tags of the song files, if available.To add songs, albums, artists, genres or composers to a playlist, select the items and Options > Add to track list. You can create a new playlist or add to an existing one.To view playlists, select Track lists. To create a new playlist, select Options > New track list. When viewing a playlist you have created yourself, to add more songs, select Options > Add tracks.To delete a playlist, press  . Deleting a playlist only deletes the playlist, not the music files.Flash PlayerWith Flash Player, you can view, play, and interact with compatible flash files made for mobile devices.Organize flash filesPress  , and select Applications > Flash Player. Scroll right.To open a folder or play a flash file, scroll to it, and press the scroll key.To send a flash file to a compatible device, scroll to it, and press the call key.To copy a flash file to another folder, select Options > Organize > Copy to folder.To move a flash file to another folder, select Options > Organize > Move to folder.To create a folder to organize your flash files, select Options >Organize > New folder.The available options may vary.
Media applications39FCC DRAFTTo delete a flash file, scroll to it, and press  .Play flash filesPress  , and select Applications > Flash Player. Scroll to a flash file, and press the scroll key.To increase or decrease the volume, use the volume key on the side of your device.If available, select Options and from the following:Pause—to pause the playbackStop—to stop the playbackQuality—to select the playback quality. If the playback appears uneven and slow, select Normal or Low.Full screen—to play the file using the entire display. To return to the normal screen, select Normal screen.Even though they are not visible in full screen, the key functions may still be available when you press either selection key.Fit to screen—to play the file in its original size after zooming itPan mode on—to be able to move around the display with the scroll key when you have zoomed inVisual RadioPress , and select Applications > Radio. You can use the application as a traditional FM radio with automatic tuning and saved stations, or with parallel visual information related to the radio program on the display, if you tune to stations that offer Visual Radio service. The Visual Radio service uses packet data (network service). You can listen to the FM radio while using other applications.If you do not have access to the Visual Radio service, the operators and radio stations in your area may not support Visual Radio. The Visual Radio service may not be available in all areas and countries.You can normally make a call or answer an incoming call while listening to the radio. The radio is muted when there is an active call.The radio selects the used frequency band based on the country information received from the network. If this information is not available, you may be asked to select the region you are located in, or you can select the region in the Visual Radio settings. See ‘Settings’, p. 41.
Media applications40Listen to the radioNote that the quality of the radio broadcast depends on the coverage of the radio station in that particular area.The FM radio depends on an antenna other than the wireless device antenna. A compatible headset or enhancement needs to be attached to the device for the FM radio to function properly.Press  , and select Applications > Radio. To start a station search, select   or  . To change the frequency manually, select Options > Manual tuning.If you have previously saved radio stations, select   or  to go to the next or previous saved station, or press the corresponding number key to select the memory location of a station.To adjust the volume, press the volume keys. To listen to the radio using the loudspeaker, select Options > Activate loudspeaker. Warning: Listen to music at a moderate level. Continuous exposure to high volume may damage your hearing. Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud.To view available stations based on location, select Options > Station directory (network service).To save the current tuned station to your station list, select Options > Save station. To open the list of your saved stations, select Options > Stations.To return to the standby mode and leave the FM radio playing in the background, select Options > Play in background.View visual contentTo check availability and costs, and to subscribe to the service, contact your network operator or service provider. To view available visual content for a tuned station, select  or Options > Start visual service. If the visual service ID has not been saved for the station, enter it, or select Retrieve to search for it in the station directory (network service).When the connection to the visual service is established, the display shows the current visual content.To adjust display settings for the visual content view, select Options > Display settings.Saved stationsYou can save up to 20 radio stations in the radio. To open your station list, select Options > Stations.To listen to a saved station, select Options > Station > Listen. To view available visual content for a station with
Media applications41FCC DRAFTVisual Radio service, select Options > Station > Start visual service.To change station details, select Options > Station > Edit.SettingsSelect Options > Settings and from the following:Start-up tone—Select whether a tone is played when the application is started.Auto-start service—Select Yes to have the Visual Radio service start automatically when you select a saved station that offers Visual Radio service.Access point—Select the access point used for the data connection. You do not need an access point to use the application as an ordinary FM radio.Current region—Select the region you are currently located in. This setting is displayed only if there was no network coverage when the application was started.RealPlayerPress , and select Applications > RealPlayer. With RealPlayer, you can play video clips, or stream media files over the air. You can activate a streaming link when you browse Web pages, or store it in the device memory or a compatible memory card (if inserted).RealPlayer supports files with extensions such as .3gp, .mp4 or .rm. However, RealPlayer does not necessarily support all file formats or all the variations of file formats. For example, RealPlayer attempts to open all .mp4 files, but some .mp4 files may include content that is not compliant with 3GPP standards and, therefore, is not supported by this device. Play video clips1To play a media file stored in device memory, or on the memory card (if inserted), select Options > Open and from the following:Most recent clips—to play one of the last six files played in RealPlayerSaved clip—to play a file saved in Gallery.See ‘Gallery’, p. 26.2Scroll to a file, and press   to play the file.Shortcuts during play:• To fast forward, press and hold  .• To rewind through the media file, press and hold  .• To mute the sound, press and hold the volume key on the side of your device down until   is displayed. To turn on the sound, press and hold the volume key up until you see  .
Media applications42Stream content over the airMany service providers require you to use an Internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point.The access points may be configured when you first start your device.Contact your service provider for more information. In RealPlayer, you can only open an rtsp:// URL address. However, RealPlayer recognizes an http link to a .ram file.To stream content over the air, select a streaming link saved in Gallery, on a Web page, or received in a text message or multimedia message. Before live content begins streaming, your device connects to the site and starts loading the content. The content is not saved in your device.Receive RealPlayer settingsYou may receive RealPlayer settings in a special text message from the network operator or service provider. See ‘Data and settings’, p. 53. For more information, contact your network operator or service provider.Change the RealPlayer settingsSelect Options > Settings and from the following:Video—to adjust the contrast of the video, or to have RealPlayer automatically repeat video clips after they finish playing.Connection—to select whether to use a proxy server, change the default access point, and set the port range used when connecting. Contact your service provider for the correct settings.Proxy settingsUse proxy—To use a proxy server, select Yes.Proxy serv. address—Enter the IP address of the proxy server.Proxy port number—Enter the port number of the proxy server.Glossary: Proxy servers are intermediate servers between media servers and their users. Some service providers use them to provide additional security or speed up access to browser pages that contain sound or video clips. Network settings3Default access point—Scroll to the access point you want to use to connect to the Internet, and press  .4Online time—Set the time for RealPlayer to disconnect from the network when you pause a media clip playing through a network link. Select User defined, and press . Enter the time, and select OK.
Media applications43FCC DRAFTLowest UDP port—Enter the lowest port number of the server’s port range. The minimum value is 1024.Highest UDP port—Enter the highest port number of the server’s port range. The maximum value is 65535.Select Options > Advanced settings to edit the bandwidth values for different networks.Movie directorTo create muvees, press  , and select Gallery, images and videos, and Options > Edit > Create muvee.muvees are short, edited video clips that can contain video, images, music, and text. Quick muvee is created automatically by Movie director after you select the style for the muvee. Movie director uses the default music and text associated with the chosen style. In a custom muvee you can select your own video and music clips, images and style, and add an opening and closing message. You can send muvees with MMS.The muvees can be saved in the Images & video folder in Gallery in .3gp file format.Create a quick muvee1In Gallery, select images and videos for the muvee, and Options > Edit > Create muvee. The style selection view opens.2Select a style for the muvee from the style list. 3Select Options > Create muvee.Create a custom muvee1In Gallery, select images and videos for the muvee, and Options > Edit > Create muvee. The style selection view opens.2Scroll to the desired style, and select Options > Customize.3Select the clips you want to include in your muvee in Videos & images or Music.In Videos & images, you can define the order in which the files are played in the muvee. To select the file you want to move, press  . Then scroll to the file below which you want to place the marked file, and press  . To add or remove images and videos from the muvee, select Options > Add/Remove.To cut the video clips, In Videos & images, select Options > Select contents. See ‘Select content’, p. 44.In Message you can add an opening and closing text to a muvee.
Media applications44In Length, you can define the length of the muvee. Select from the following:User defined—to define the length of the muveeMultimedia message—to optimize the length of the muvee for MMS sendingSame as music—to set the muvee duration to be the same as the chosen music clipAuto-select—to include all the selected images and video clips in the muvee4Select Options > Create muvee. The preview view opens.5To preview the custom muvee before saving it, select Options > Play.6To save the muvee, select Options > Save.To create a new custom muvee by using the same style settings, select Options > Recreate.Select contentTo edit the selected video clips, in the Videos & images folder, select Options > Select contents. You can select which parts of the video clip you want to include or exclude in the muvee. In the slide, green is for included, red is for excluded, and grey is for neutral parts.To include a part of the video clip in the muvee, scroll to the part, and select Options > Include. To exclude a part, select Options > Exclude. To exclude a shot, select Options > Exclude shot.To let Movie director randomly include or exclude a part of the video clip, scroll to the part, and select Options > Mark as neutral.To let Movie director randomly include or exclude parts of video clip, select Options > Mark all as neutral.SettingsIn the style selection view, select Options > Customize > Settings to edit the following options:Memory in use—Select where to store your muvees.Resolution—Select the resolution of your muvees. Select Automatic to use the optimal resolution based on the number and length of the video clips you have selected.Default muvee name—Set a default name for the muvees.
Time management45FCC DRAFTTime managementClockPress , and select Applications > Clock. To set a new alarm, select Options > Set alarm. When an alarm is active,  is shown.To turn off the alarm, select Stop, or to stop the alarm for 5 minutes, select Snooze.If the alarm time is reached while the device is switched off, the device switches itself on and starts sounding the alarm tone. If you select Stop, the device asks whether you want to activate the device for calls. Select No to switch off the device or Yes to make and receive calls. Do not select Yes when wireless phone use may cause interference or danger.To cancel an alarm, select Applications > Clock > Options > Remove alarm.Clock settingsTo change the clock settings, select Applications > Clock > Options > Settings.To change the time or date, select Time or Date.To change the clock shown in the standby mode, select Clock type > Analog or Digital.To allow the mobile phone network to update the time, date, and time zone information to your device (network service), select Network operator time > Auto-update.To change the alarm tone, select Clock alarm tone.World clockTo open the world clock view, open Clock, and press  . In the world clock view, you can view the time in different cities.To add cities to the list, select Options > Add city. You can add a maximum of 15 cities to the list.To set your current city, scroll to a city, and select Options > My current city. The city is displayed in the clock main view, and the time in your device is changed according to the city selected. Check that the time is correct and matches your time zone.
Time management46CalendarUse Calendar to remind you of meetings and anniversaries, and to keep track of your tasks and other notes.Create calendar entries Shortcut: In the day, week, or month calendar view, press any key ( — ). An appointment entry opens, and the characters you enter are added to the Subject field. In the to-do view, a to-do note entry opens.1Press  , and select Calendar > Options > New entry and one of the following:Meeting—to remind you of an appointment that has a specific date and timeMeeting request—to create and send a new meeting request. You need to have a mailbox set up for sending requests. See ‘Mailbox’, p. 54.Memo—to write a general entry for a dayAnniversary—to remind you of birthdays or special dates (entries are repeated every year)To-do—to remind you of a task that needs doing by a specific date2Fill in the fields. To set an alarm, select Alarm > On, and enter the Alarm time and Alarm date.To add a description for an appointment, select Options > Add description.3To save the entry, select Done.When the calendar alarms for a note, select Silence to turn off the calendar alarm tone. The reminder text stays on the screen. To end the calendar alarm, select Stop. To set the alarm to snooze, select Snooze. Tip! You can synchronize your calendar with a compatible PC using Nokia PC Suite. When creating a calendar entry, set the desired Synchronization option.Calendar views Tip! Select Options > Settings to change the starting day of the week or the view that is shown when you open the calendar.In the month view, dates that have calendar entries are marked with a small triangle in the right bottom corner. In the week view, memos and anniversaries are placed before
Time management47FCC DRAFT8 a.m. To switch between the month view, week view, day view, and to-do view, press  .To go to a certain date, select Options > Go to date. To jump to today, press  .To send a calendar note to a compatible device, select Options > Send.To print calendar entries on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.Manage your calendar entriesDeleting past entries in Calendar saves space in your device memory.To delete more than one event at a time, go to the month view, and select Options > Delete entry > Before date or All entries.To mark a task as completed, scroll to it in the to-do view, and select Options > Mark as done.Calendar settingsTo modify the Calendar alarm tone, Default view, Week starts on, and Week view title, select Options > Settings.
Messaging48FCC DRAFTMessagingPress  , and select Messag. (network service). In Messag., you can create, send, receive, view, edit, and organize text messages, multimedia messages, e-mail messages, and special text messages containing data. You can also receive Web service messages, cell broadcast messages, and send service commands. Messages and data received using Bluetooth connectivity or infrared are received in the Inbox folder in Messag..To create a new message, select New message.Only devices that have compatible features can receive and display multimedia messages. The appearance of a message may vary depending on the receiving device.Messag. contains the following folders: Inbox—Received messages, except e-mail and cell broadcast messages, are stored here. E-mail messages are stored in the Mailbox. My folders—Organize your messages into folders. Tip! To avoid rewriting messages that you send often, use texts in the templates folder. Mailbox—Connect to your remote mailbox to retrieve your new e-mail messages or view your previously retrieved e-mail messages offline. See ‘E-mail’, p. 58. Drafts—Draft messages that have not been sent are stored here. Sent—The last 20 messages that have been sent, excluding messages sent using Bluetooth connectivity or infrared, are stored here. To change the number of messages to be saved, see ‘Other settings’, p. 60. Outbox—Messages waiting to be sent are temporarily stored here. Example: Messages are placed in the outbox, for example, when your device is outside network coverage. You can also schedule e-mail messages to be sent the next time you connect to your remote mailbox. Reports—You can request the network to send you a delivery report of the text messages and multimedia messages you have sent (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible. Tip! When you have opened any of the default folders, to switch between the folders, press   or  .To enter and send service requests (also known as USSD commands), such as activation commands for network
Messaging49services, to your service provider, select Options > Service command in the main view of Messag..Cell broadcast (network service) allows you to receive messages on various topics, such as weather or traffic conditions, from your service provider. For available topics and relevant topic numbers, contact your service provider. In the main view of Messaging, select Options > Cell broadcast. In the main view, you can see the status of a topic, a topic number, name, and whether it has been flagged ( ) for follow-up.Write textABC, abc, and Abc indicate the selected character mode. 123 indicates the number mode.Traditional text input is displayed when you write text using traditional text input.• Press a number key ( — ) repeatedly until the desired character appears. There are more characters available for a number key than are printed on the key.• If the next letter is located on the same key as the present one, wait until the cursor appears (or press   to end the time-out period), and enter the letter.• To insert a space, press  . To move the cursor to the next line, press   three times.Predictive text inputYou can enter any letter with a single keypress. Predictive text input is based on a built-in dictionary to which you can add new words.   is displayed when you write text using predictive text input.1To activate predictive text input, press  , and select Predictive text on. This activates predictive text input for all editors in the device.2To write the desired word, press the keys  — . Press each key only once for one letter. For example, to write "Nokia" when the English dictionary is selected, press   for N,   for o,  for k,   for i, and  for a.The word suggestion changes after each keypress.3When you finish writing the word correctly, press   to confirm it, or press   to add a space.If the word is not correct, press   repeatedly to view the matching words the dictionary has found one
Messaging50FCC DRAFTby one, or press  , and select Predictive text > Matches.If the ? character is shown after the word, the word is not in the dictionary. To add a word to the dictionary, select Spell, enter the word using traditional text input, and select OK. The word is added to the dictionary. When the dictionary is full, a new word replaces the oldest added word.4Start writing the next word.Write compound wordsWrite the first half of a compound word; to confirm it, press  . Write the last part of the compound word. To complete the compound word, press   to add a space.Turn predictive text input offTo turn predictive text input off for all editors in the device, press  , and select Predictive text > Off. Tip! To turn predictive text input on or off, quickly press  twice.Tips on text inputTo insert a number in the letter mode, press and hold the desired number key.To switch between the letter and number mode, press and hold .To switch between the different character modes, press .To delete a character, press  . To delete more than one character, press and hold  .The most common punctuation marks are available under .To open a list of special characters, press and hold  . Tip! To insert several special characters at the same time, press   when you select each character.Write and send messagesBefore you can create a multimedia message or write an e-mail, you must have the correct connection settings in place. See ‘Receive MMS and e-mail settings’, p. 52 and ‘E-mail’, p. 58.The wireless network may limit the size of MMS messages. If the inserted picture exceeds this limit, the device may make it smaller so that it can be sent by MMS.1Select New message and from the following:Text msg.—to send a text messageMultimedia message—to send a multimedia message (MMS)E-mail—to send an e-mail
Messaging51If you have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start.2In the To field, press   to select recipients or groups from contacts, or enter the recipient’s phone number or e-mail address. To add a semicolon (;) that separates the recipients, press  . You can also copy and paste the number or address from the clipboard.3In the Subject field, enter the subject of a multimedia message or e-mail. To change the fields that are visible, select Options > Address fields.4In the message field, write the message. To insert a template, select Options > Insert or Insert object > Template.5To add a media object to a multimedia message, select Options > Insert object > Image, Sound clip, or Video clip. When sound is added,   is shown.You cannot send video clips that are saved in the .mp4 format in a multimedia message. To change the format in which recorded videos are saved, see ‘Video settings’, p. 24.6To take a new picture or record sound or video for a multimedia message, select Insert new > Image, Sound clip, or Video clip. To insert a new slide to the message, select Slide.To see what the multimedia message looks like, select Options > Preview.7To add an attachment to an e-mail, select Options > Insert > Image, Sound clip, Video clip, or Note. E-mail attachments are indicated by  . Tip! To send other file types as attachments, open the appropriate application, and select Send > Via e-mail, if available.8To send the message, select Options > Send, or press . Note: Your device may indicate that your message was sent to the message center number programmed into your device. Your device may not indicate whether the message is received at the intended destination. For more details about messaging services, contact your service provider.Your device supports the sending of text messages beyond the character limit for a single message. Longer messages are sent as a series of two or more messages. Your service provider may charge accordingly. Characters that use accents or other marks, and characters from some
Messaging52FCC DRAFTlanguage options like Chinese, take up more space limiting the number of characters that can be sent in a single message. In the navigation bar, you can see the message length indicator counting backwards. For example, 10 (2) means that you can still add 10 characters for the text to be sent as two messages.E-mail messages are automatically placed in Outbox before sending. If sending does not succeed, the e-mail is left in the Outbox first with the Queued status, and then if the sending has failed several times, with the Failed status.Tip! You can combine images, video, sound, and text to a presentation and send it in a multimedia message. Start to create a multimedia message, and select Options > Create presentation. The option is shown only if MMS creation mode is set to Guided or Free. See ‘Multimedia messages’, p. 57.Receive MMS and e-mail settingsYou may receive the settings in a message from your network operator or service provider. See ‘Data and settings’, p. 53.Enter the MMS settings manually1Press  , and select Tools > Settings > Connection > Access points, and define the settings for a multimedia messaging access point. See ‘Connection’, p. 94.2Press  , and select Messaging > Options > Settings > Multim. msg. > Access point in use and the access point you created as the preferred connection. See also ‘Multimedia messages’, p. 57.Before you can send, receive, retrieve, reply to, and forward e-mail, you must do the following:• Configure an Internet access point (IAP) correctly. See ‘Connection’, p. 94.• Define your e-mail settings correctly. If you select Mailbox in the Messag. main view and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also ‘E-mail’, p. 58.You must have a separate e-mail account. Follow the instructions given by your remote mailbox and Internet service provider (ISP).Inbox—receive messagesIn the Inbox folder,   indicates an unread text message,  an unread multimedia message,   data received through infrared, and   data received through Bluetooth connectivity.
Messaging53When you receive a message,   and 1 new message are shown in the standby mode. To open the message, select Show. To open a message in Inbox, scroll to it, and press .To reply to a received message, select Options > ReplyTo print a text or a multimedia message on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.Multimedia messages Important: Exercise caution when opening messages. Multimedia message objects may contain malicious software or otherwise be harmful to your device or PC.You may receive a notification that a multimedia message is waiting in the multimedia message center. To start a packet data connection to retrieve the message to your device, select Options > Retrieve.When you open a multimedia message ( ), you may see an image and a message.   is shown if sound is included, or   if video is included. To play the sound or the video, select the indicator.To see the media objects that have been included in the multimedia message, select Options > Objects.If the message includes a multimedia presentation,   is displayed. To play the presentation, select the indicator.Data and settingsYour device can receive many kinds of messages that contain data ( ):Configuration message—You may receive settings from your network operator, service provider, or company information management department in a configuration message. To save the settings, select Options > Save all.Business card—To save the information to Contacts, select Options > Save business card. Certificates or sound files attached to the business card are not saved.Ringing tone—To save the ringing tone, select Options > Save.Operat. logo—To have the logo shown in the standby mode instead of the network operator’s own identification, select Options > Save.Calen. entry—To save the invitation, select Options > Save to Calendar.Web message—To save the bookmark to the bookmarks list in the Web browser, select Options > Add to bookmarks. If the message contains both access point settings and bookmarks, to save the data, select Options > Save all.
Messaging54FCC DRAFTE-mail notif.—The note tells you how many new e-mails you have in your remote mailbox. An extended notification may list more detailed information.Web service messagesWeb service messages ( ) are notifications (for example, news headlines) and may contain a text message or a link. For availability and subscription, contact your service provider.MailboxIf you select Mailbox and have not set up your e-mail account, you are prompted to do so. To start creating the e-mail settings with the mailbox guide, select Start. See also ‘E-mail’, p. 58.When you create a new mailbox, the name you give to the mailbox replaces Mailbox in the Messaging main view. You can have up to six mailboxes.Open the mailboxWhen you open the mailbox, the device asks if you want to connect to the mailbox (Connect to mailbox?).To connect to your mailbox and retrieve new e-mail headings or messages, select Yes. When you view messages online, you are continuously connected to a remote mailbox using a data connection. See also ‘Connection’, p. 94.To view previously retrieved e-mail messages offline, select No. When you view e-mail messages offline, your device is not connected to the remote mailbox.Retrieve e-mail messagesIf you are offline, select Options > Connect to start a connection to the remote mailbox.  Important: Exercise caution when opening messages. E-mail messages may contain malicious software or otherwise be harmful to your device or PC.1When you have an open connection to a remote mailbox, select Options > Retrieve e-mail and one of the following:New—to retrieve all new e-mail messagesSelected—to retrieve only the e-mail messages that have been markedAll—to retrieve all messages from the mailboxTo stop retrieving messages, select Cancel.2After you retrieve the e-mail messages, you can continue viewing them online, or select Options >
Messaging55Disconnect to close the connection and view the e-mail messages offline.E-mail status indicators: The new e-mail (offline or online mode) has not been retrieved to your device. The new e-mail has been retrieved to your device. The e-mail message has been read, and it has not been retrieved to your device. The e-mail message has been read. The e-mail heading has been read and the message content has been deleted from the device.3To open an e-mail message, press . If the e-mail message has not been retrieved and you are offline, you are asked if you want to retrieve this message from the mailbox.To view e-mail attachments, open a message that has the attachment indicator  , and select Options > Attachments. If the attachment has a dimmed indicator, it has not been retrieved to the device; select Options > Retrieve.To print an e-mail message on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.Retrieve e-mail messages automaticallyTo retrieve messages automatically, select Options > E-mail settings > Automatic retrieval > Header retrieval > Always enabled or Only in home net., and define when and how often the messages are retrieved.Retrieving e-mail messages automatically may increase your call costs due to the data traffic.Delete e-mail messagesTo delete the contents of an e-mail message from the device while still retaining it in the remote mailbox, select Options > Delete. In Delete msg. from:, select Phone only.The device mirrors the e-mail headings in the remote mailbox. Although you delete the message content, the e-mail heading stays in your device. If you want to remove the heading as well, you must first delete the e-mail message from your remote mailbox, and then make a connection from your device to the remote mailbox again to update the status.To delete an e-mail from the device and the remote mailbox, select Options > Delete. In Delete msg. from:, select Phone and server.If you are offline, the e-mail is deleted first from your device. During the next connection to the remote mailbox,
Messaging56FCC DRAFTit is automatically deleted from the remote mailbox. If you are using the POP3 protocol, messages marked to be deleted are removed only after you have closed the connection to the remote mailbox.To cancel deleting an e-mail from the device and server, scroll to an e-mail that has been marked to be deleted during the next connection ( ), and select Options > Restore.Disconnect from the mailboxWhen you are online, to end the data connection to the remote mailbox, select Options > Disconnect.View messages on a SIM cardBefore you can view SIM messages, you must copy them to a folder in your device.1In the Messag. main view, select Options > SIM messages.2Select Options > Mark/Unmark > Mark or Mark all to mark messages.3Select Options > Copy. A list of folders opens.4To start copying, select a folder and OK. To view the messages, open the folder.Messaging settingsFill in all fields marked with Must be defined or with a red asterisk. Follow the instructions given by your service provider. You may also obtain settings from your service provider in a configuration message.Some or all message centers or access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.Text messagesPress  , and select Messag. > Options > Settings > Text msg. and from the following:Message centers—View a list of all text message centers that have been defined.Character encoding— To use character conversion to another encoding system when available, select Reduced support.Msg. center in use—Select which message center is used to deliver text messages.Receive report—Select whether the network sends delivery reports on your messages (network service).Message validity—Select how long the message center resends your message if the first attempt fails (network
Messaging57service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.Message sent as—Change this option only if you are sure that your message center is able to convert text messages into these other formats. Contact your network operator.Preferred conn.—Select the connection used for sending text messages: GSM network or packet data, if supported by the network. See ‘Connection’, p. 94.Reply via same ctr.—Select whether you want the reply message to be sent using the same text message center number (network service).Multimedia messagesPress , and select Messag. > Options > Settings > Multimedia message and from the following:Image size—Define the size of the image in a multimedia message: Original (shown only when the MMS creation mode is set to Guided or Free), Small, or Large.MMS creation mode —If you select Guided, the device informs you if you try to send a message that may not be supported by the recipient. Select Restricted; the device prevents you from sending messages that may not be supported.Access point in use—Select which access point is used as the preferred connection for the multimedia message center.Multimedia retrieval—Select how you want to receive multimedia messages. To receive multimedia messages automatically in your home network (the operator whose SIM card is in your device), select Auto. in home network. Outside your home network, you receive a notification that there is multimedia message that you can retrieve in the multimedia message center.When you are outside your home network, sending and receiving multimedia messages may cost you more.If you select Multimedia retrieval > Always automatic, your device automatically makes an active packet data connection to retrieve the message both in and outside your home network.Allow anon. msgs.—Select whether you want to decline messages from an anonymous sender.Receive ads—Define whether you want to receive multimedia message advertisements.Receive report—Select whether you want the status of the sent message to be shown in the log (network service). Receiving a delivery report of a multimedia message that has been sent to an e-mail address may not be possible.
Messaging58FCC DRAFTDeny report sending—Select whether you want to deny your device sending delivery reports of received multimedia messages.Message validity—Select how long the message center resends your message if the first attempt fails (network service). If the recipient cannot be reached within the validity period, the message is deleted from the message center.E-mailPress  , and select Messag. > Options > Settings > E-mail and from the following:Mailboxes—Select a mailbox to change the following settings: Connection settings, User settings, Retrieval settings, and Automatic retrieval.Mailbox in use— Select which mailbox you want to use for sending e-mail.To create a new mailbox, select Options > New mailbox in the mailbox main view.Connection settingsTo edit the settings for the e-mail you receive, select Incoming e-mail and from the following:User name—Enter your user name, given to you by your service provider.Password—Enter your password. If you leave this field blank, you are prompted for the password when you try to connect to your remote mailbox.Incoming mail serv.—Enter the IP address or host name of the mail server that receives your e-mail.Access point in use—Select an Internet access point (IAP). See ‘Connection’, p. 94.Mailbox name—Enter a name for the mailbox.Mailbox type—Defines the e-mail protocol that your remote mailbox service provider recommends. The options are POP3 and IMAP4. This setting can be selected only once and cannot be changed if you have saved or exited from the mailbox settings. If you use the POP3 protocol, e-mail messages are not updated automatically when you are online. To see the latest e-mail messages, you must disconnect and make a new connection to your mailbox.Security (ports)—Select the security option used to secure the connection to the remote mailbox.Port—Define a port for the connection.APOP secure login (for POP3 only)—Use with the POP3 protocol to encrypt the sending of passwords to the remote e-mail server while connecting to the mailbox.To edit the settings for the e-mail you send, select Outgoing e-mail and from the following:
Messaging59My e-mail address—Enter the e-mail address given to you by your service provider. Replies to your messages are sent to this address.Outgoing mail serv.—Enter the IP address or host name of the mail server that sends your e-mail. You may only be able to use the outgoing server of your network operator. Contact your service provider for more information.Access point in use—Select an Internet access point (IAP). See ‘Connection’, p. 94.The settings for User name, Password, Security (ports), and Port are similar to the ones in Incoming e-mail.User settingsMy name—Enter your own name. Your name replaces your e-mail address in the recipient’s device when the recipient’s device supports this function.Send message—Define how e-mail is sent from your device. Select Immediately for the device to connect to the mailbox when you select Send message. If you select During next conn., e-mail is sent when the connection to the remote mailbox is available.Send copy to self—Select whether you want to save a copy of the e-mail to your remote mailbox and to the address defined in My e-mail address.Include signature—Select whether you want to attach a signature to your e-mail messages.New e-mail alerts—Select whether you want to receive the new e-mail indications, a tone and a note, when new mail is received to the mailbox.Retrieval settingsE-mail to retrieve—Define which parts of the e-mail are retrieved: Headers only, Partially (kB), Messages (for IMAP4 only), or Msgs. & attachs..Retrieval amount—Define how many new e-mail messages are retrieved to the mailbox.IMAP4 folder path (for IMAP4 only)—Define the folder path for folders to be subscribed.Folder subscriptions (for IMAP4 only)—Subscribe to other folders in the remote mailbox and retrieve content from those folders.Automatic retrievalHeader retrieval—Select whether you want the device to retrieve new e-mail automatically. You can define when, and how often, the messages are retrieved.Retrieving e-mail messages automatically may increase your call costs due to the data traffic.Web service messagesPress , and select Messaging > Options > Settings > Service message. Select whether you want to receive
Messaging60FCC DRAFTservice messages. If you want to set the device to automatically activate the browser and start a network connection to retrieve content when you receive a service message, select Download messages > Automatically.Cell broadcastCheck the available topics and related topic numbers with your service provider. Press  , and select Messaging > Options > Settings > Cell broadcast and from the following:Reception—Select whether you want to receive cell broadcast messages.Language—Select the languages in which you want to receive messages: All, Selected, or Other.Topic detection—Select whether the device automatically searches for new topic numbers, and saves the new numbers without a name to the topic list.Other settingsPress  , and select Messaging > Options > Settings > Other and from the following:Save sent messages—Select whether you want to save a copy of the text messages, multimedia messages, or e-mail that you send to the Sent folder.No. of saved msgs.—Define how many sent messages are saved to the Sent folder at a time. The default limit is 20 messages. When the limit is reached, the oldest message is deleted.Memory in use—If a compatible memory card is inserted in the device, select the memory where you want to save your messages: Phone memory or Memory card.
Contacts (Phonebook)61FCC DRAFTContacts (Phonebook)Press , and select Contacts. In Contacts you can save and update contact information, such as phone numbers, home addresses, or e-mail addresses, of your contacts. You can add a personal ringing tone or a thumbnail image to a contact card. You can also create contact groups, which allow you to send text messages or e-mail to many recipients at the same time. You can add received contact information (business cards) to contacts. See ‘Data and settings’, p. 53. Contact information can only be sent to or received from compatible devices.To view the amount of contacts, groups, and the available memory in Contacts, select Options > Contacts info.Save and edit names and numbers1Select Options > New contact.2Fill in the fields that you want, and select Done.To edit contact cards in Contacts, scroll to the contact card you want to edit, and select Options > Edit. You can also search for the desired contact by entering the first letters of the name to the search field. A list of the contacts starting with the letters appear on the display. Tip! To add and edit contact cards, you can also use Nokia Contacts Editor available in Nokia PC Suite. To attach a small thumbnail image to a contact card, open the contact card, and select Options > Edit > Options > Add thumbnail. The thumbnail image is shown when the contact calls.To listen to the voice tag assigned to the contact, scroll to a contact card, and press the scroll key. Then select Options > Play voice tag. See ‘Voice dialing’, p. 65.To send contact information, select the card you want to send. Select Options > Send > Via text message, Via multimedia, Via Bluetooth, or Via infrared. See ‘Messaging’, p. 48 and ‘Send data using Bluetooth connectivity’, p. 78. Tip! To print contact cards on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.To add a contact to a group, select Options > Add to group: (shown only if you have created a group). See ‘Create contact groups’, p. 63.
Contacts (Phonebook)62 Tip! To check to which groups a contact belongs, scroll to the contact, and select Options > Belongs to groups.To delete a contact card in Contacts, select a card, and press  . To delete several contact cards at the same time, press   and   to mark the contacts, and press   to delete.Default numbers and addressesYou can assign default numbers or addresses to a contact card. In this way if a contact has several numbers or addresses, you can easily call or send a message to the contact to a certain number or address. The default number is also used in voice dialing.1In the address book, select a contact, and press  .2Select Options > Defaults.3Select a default to which you want to add a number or an address, and select Assign.4Select a number or an address you want to set as a default.The default number or address is underlined in the contact card.Copy contactsTo copy names and numbers from a SIM card to your device, press  , and select Contacts > Options > SIM contacts > SIM directory. Select the names you want to copy and Options > Copy to Contacts.To copy contacts to your SIM card, press  , and select Contacts. Select the names you want to copy and Options > Copy to SIM direct., or Options > Copy > To SIM directory. Only the contact card fields supported by your SIM card are copied. Tip! You can synchronize your contacts to a compatible PC with Nokia PC Suite. SIM directory and other SIM servicesFor availability and information on using SIM card services, contact your SIM card vendor. This may be the service provider, network operator, or other vendor.Press  , and select Contacts > Options > SIM contacts > SIM directory to see the names and numbers stored on the SIM card. In the SIM directory you can add, edit, or copy numbers to contacts, and you can make calls.To view the list of fixed dialing numbers, select Options > SIM contacts > Fixed dialing contacts. This setting is only shown if supported by your SIM card.
Contacts (Phonebook)63FCC DRAFTTo restrict calls from your device to selected phone numbers, select Options > Activ. fixed dialing. You need your PIN2 code to activate and deactivate fixed dialing or edit your fixed dialing contacts. Contact your service provider if you do not have the code. To add new numbers to the fixed dialing list, select Options > New SIM contact. You need the PIN2 code for these functions.When you use Fixed dialing, packet data connections are not possible, except when sending text messages over a packet data connection. In this case, the message center number and the recipient’s phone number must be included on the fixed dialing list.When fixed dialing is activated, calls may be possible to the official emergency number programmed into your device.Add ringing tones for contactsWhen a contact or group member calls you, the device plays the chosen ringing tone (if the caller’s telephone number is sent with the call and your device recognizes it).1Press   to open a contact card or go to the groups list, and select a contact group.2Select Options > Ringing tone. A list of ringing tones opens.3Select the ringing tone you want to use for the individual contact or the selected group.You can also use a video clip as a ringing tone.To remove the ringing tone, select Default tone from the list of ringing tones.Create contact groups1In Contacts, press   to open the groups list.2Select Options > New group. 3Write a name for the group or use the default name Group N, and select OK. 4Open the group, and select Options > Add members.5Scroll to a contact, and press   to mark it. To add multiple members at a time, repeat this action on all the contacts you want to add.6Select OK to add the contacts to the group.To rename a group, select Options > Rename, enter the new name, and select OK.Remove members from a group1In the groups list, open the group you want to modify.2Scroll to the contact, and select Options > Remove from group.3Select Yes to remove the contact from the group.
Make calls64FCC DRAFTMake callsCalls Tip! To increase or decrease the volume during a call, use the volume key on the side of your device. If you have set the volume to Mute, select Unmute first, and then press the volume key up or down.1In the standby mode, enter the phone number, including the area code. To remove a number, press  . For international calls, press   twice for the + character (replaces the international access code), and enter the country code, area code (omit the leading zero if necessary), and phone number.2Press   to call the number.3Press   to end the call (or to cancel the call attempt).Pressing   always ends a call, even if another application is active.  To make a call from Contacts, press  , and select Contacts. Scroll to the desired name, or enter the first letters of the name to the search field. Matching contacts are listed. To call, press  . Select the call type Voice call. You must copy the contacts from your SIM card to Contacts before you can make a call this way. See ‘Copy contacts’, p. 62.To call your voice mailbox (network service), press and hold  in the standby mode. See also ‘Call forwarding’, p. 99. Tip! To change the phone number of your voice mailbox, press  , and select Tools > Voice mail > Options > Change number. Enter the number (obtained from your service provider), and select OK.To call a recently dialed number in the standby mode, press . Scroll to the number, and press  .Make a conference call1Make a call to the first participant.2To make a call to another participant, select Options > New call. The first call is automatically put on hold.3When the new call is answered, to join the first participant in the conference call, select Options > Conference.To add a new person to the call, repeat step 2, and select Options > Conference > Add to conference. Your device supports conference calls between a maximum of six participants, including yourself.
Make calls65To have a private conversation with one of the participants, select Options > Conference > Private. Select a participant, and select Private. The conference call is put on hold on your device. The other participants can still continue the conference call. After you finish the private conversation, select Options > Add to conference to return to the conference call.To drop a participant, select Options > Conference > Drop participant, scroll to the participant, and select Drop. 4To end the active conference call, press  .1-touch dial a phone numberTo activate1-touch dialing, press  , and select Tools > Settings > Call > 1-touch dialing> On.To assign a phone number to one of the 1-touch dialing keys ( — ), press  , and select Tools > Spd. dial. Scroll to the key to which you want to assign the phone number, and select Options > Assign.   is reserved for the voice mailbox. To call in the standby mode, press the 1-touch dial key and .Voice dialingYour device supports enhanced voice commands. Enhanced voice commands are not dependent on the speaker’s voice, so the user does not record voice tags in advance. Instead, the device creates a voice tag for the entries in contacts, and compares the spoken voice tag to it. The voice recognition in the device adapts to the main user’s voice to recognize the voice commands better.The voice tag for a contact is the name or nickname that is saved on the contact card. To listen to the synthesized voice tag, open a contact card, and select Options > Play voice tag.Make a call with a voice tagNote: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely upon voice dialing in all circumstances.When you use voice dialing, the loudspeaker is in use. Hold the device at a short distance away when you say the voice tag.1To start voice dialing, in the standby mode, press and hold the right selection key. If you are using a compatible headset with the headset key, press and hold the headset key to start voice dialing.
Make calls66FCC DRAFT2A short tone is played, and Speak now is displayed. Say clearly the name or nickname that is saved on the contact card.3The device plays a synthesized voice tag for the recognized contact in the selected device language, and displays the name and number. After a timeout of 2.5 seconds, the device dials the number.If the recognized contact was not correct, select Next to view a list of other matches, or Quit to cancel voice dialing.If several numbers are saved under the name, the device selects the default number, if it has been set. Otherwise the device selects the first available number of the following: Mobile, Mobile (home), Mobile (work), Telephone, Tel. (home), and Tel. (work).Answer or decline a callTo answer the call, press  .To mute the ringing tone when a call comes in, select Silence. Tip! To change the device tones for different environments and events, for example, when you want your device to be silent, see ‘Profiles—set tones’, p. 88.If you do not want to answer a call, press  . If you have activated the Call forward > If busy function to forward calls, declining an incoming call also forwards the call. See ‘Call forwarding’, p. 99.When you decline an incoming call, you can send a text message to the caller informing why you cannot answer the call. Select Options > Send text message. You can edit the text before sending it. To set up this option and write a standard text message, see ‘Call settings’, p. 93.Call waiting (network service)You can answer a call while you have another call in progress if you have activated Call waiting in Tools > Settings > Call > Call waiting.To answer the waiting call, press  . The first call is put on hold.To switch between the two calls, select Swap. To connect an incoming call or a call on hold with an active call and to disconnect yourself from the calls, select Options > Transfer. To end the active call, press  . To end both calls, select Options > End all calls.Options during a callMany of the options that you can use during a voice call are network services. Select Options during a call for some of the following options: Mute or Unmute, Answer, Decline, Swap, Hold or Unhold, Activate handset,
Make calls67Activate loudsp., or Activate handsfree (if a compatible headset with Bluetooth connectivity is attached), End active call or End all calls, New call, Conference, Transfer, and Open active standby. Select from the following: Replace—to end an active call and replace it by answering the waiting call.Send touch tones—to send touch tone strings, for example, a password. Enter the touch tone string or search for it in Contacts. To enter a wait character (w) or a pause character (p), press   repeatedly. Select OK to send the tone.  Tip! You can add touch tones to the Phone number or Touch tones fields in a contact card. LogTo monitor the phone numbers of missed, received, and dialed voice calls, press  , and select Applications > Log >Recent calls. The device registers missed and received calls only if the network supports these functions, the device is switched on, and within the network service area.To clear all recent call lists, select Options > Clear recent calls in the recent calls main view. To clear one of the call registers, open the register you want to erase, and select Options > Clear list. To clear an individual event, open a register, scroll to the event, and press  .Call timers To monitor the approximate duration of your incoming and outgoing calls, press  , and select Applications > Log>Call timers.To set the display of the call timers while a call is active, select Tools > Log > Options > Settings > Show call duration > Yes or No. Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.To clear call duration timers, select Options > Clear timers. For this you need the lock code. See ‘Phone and SIM’, p. 96.Packet dataTo check the amount of data sent and received during packet data connections, press  , and select Tools > Log > Packet data. For example, you may be charged for your packet data connections by the amount of data sent and received.
Make calls68FCC DRAFTMonitor all communication eventsIcons in Log: Incoming Outgoing  Missed communication eventsTo monitor all voice calls, text messages, or data connections registered by the device, press  , select Tools > Log, and scroll right to open the general log. For each communication event, you can see the sender or recipient name, phone number, name of the service provider, or access point. You can filter the general log to view just one type of event, and create new contact cards based on the log information. Tip! To view a list of sent messages, press  , and select Messaging > Sent.Subevents, such as a text message sent in more than one part and packet data connections, are logged as one communication event. Connections to your mailbox, multimedia messaging center, or Web pages are shown as packet data connections.To add an unknown phone number from Log to your contacts, select Options > Add to contacts.To filter the log, select Options > Filter and a filter.To erase the contents of the log, recent calls register, and messaging delivery reports permanently, select Options > Clear log. Select Yes to confirm. To remove a single event from the log, press  .To set the Log duration, select Options > Settings > Log duration. The log events remain in the device memory for a set number of days after which they are automatically erased to free memory. If you select No log, all the log contents, recent calls register, and messaging delivery reports are permanently deleted.To view the details of a communication event, in the general log view scroll to an event, and press  . Tip! In the details view you can copy a phone number to the clipboard, and paste it to a text message, for example. Select Options > Copy Number.Packet data counter and connection timer: To view how much data, measured in kilobytes, is transferred and how long a certain packet data connection lasts, scroll to an incoming or outgoing event indicated by Pack., and select Options > View details.
Make calls69
Web browsers70FCC DRAFTWeb browsersServicesPress  , and select Services (network service).Various service providers maintain pages specifically designed for mobile devices that you can view with the Services browser. These pages use the wireless markup language (WML), extensible hypertext markup language (XHTML), or hypertext markup language (HTML).Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services. Shortcut: To start a connection, press and hold   in the standby mode.Access pointTo access pages, you need service settings for the page that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the page. See ‘Data and settings’, p. 53. For more information, contact your network operator or service provider. Tip! Settings may be available on the Web site of a network operator or service provider.Enter settings manually1Press , select Tools > Settings > Connection > Access points, and define the settings for an access point. Follow the instructions given to you by your service provider. See ‘Connection’, p. 94.2Press  , and select Services > Options > Bookmark manager > Add bookmark. Write a name for the bookmark and the address of the page defined for the current access point.3To set the created access point as the default access point, select Options > Settings > Access point.Bookmarks viewThe bookmarks view opens when you open Services.Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does not warrant or endorse these sites. If you choose to access them, you should take the same precautions, for security or content, as you would with any Internet site.
Web browsers71 indicates the starting page defined for the default access point.Connection securityIf the security indicator   is displayed during a connection, the data transmission between the device and the Internet gateway or server is encrypted.The security icon does not indicate that the data transmission between the gateway and the content server (or place where the requested resource is stored) is secure. The service provider secures the data transmission between the gateway and the content server.Select Options > Details > Security to view details about the connection, encryption status, and information about server and user authentication.Security certificates may be required for some services, such as banking services. For more information, contact your service provider. See also ‘Certificate management’, p. 97.Browse Important: Use only services that you trust and that offer adequate security and protection against harmful software.To download a page, select a bookmark, or enter the address in the field ( ).On a browser page, new links appear underlined in blue and previously visited links in purple. Images that act as links have a blue border around them.To open links and make selections, press  . Shortcut: Use   to jump to the end of a page and  to the beginning of a page.To go to the previous page while browsing, select Back. If Back is not available, select Options > Navigation options > History to view a chronological list of the pages you visited during a browsing session.To retrieve the latest content from the server, select Options > Navigation options > Reload.To save a bookmark, select Options > Save as bookmark. Tip! To access the bookmarks view while browsing, press and hold  . To return to the browser view, select Options > Back to page.To save a page while browsing, select Options > Advanced options > Save page. You can save pages to the device memory or compatible memory card (if inserted), and browse them when offline. To access the pages later, press   in the bookmarks view to open the Saved pages view.
Web browsers72FCC DRAFTTo enter a new URL address, select Options > Navigation options > Go to web address.To open a sublist of commands or actions for the currently open page, select Options > Service options.You can download files that cannot be shown on the browser page, such as ringing tones, images, operator logos, themes, and video clips. To download an item, scroll to the link, and press  .When you start a download, a list of ongoing, paused, and completed downloads from the current browsing session is displayed. You can also view the list by selecting Options > Downloads. In the list, scroll to an item, and select Options to pause, resume, or cancel ongoing downloads, or open, save, or delete completed downloads. Download and purchase itemsYou can download items such as ringing tones, images, operator logos, themes, and video clips. These items can be provided free, or you can purchase them. Downloaded items are handled by the respective applications in your device, for example, a downloaded photo can be saved in Gallery. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.1To download the item, scroll to the link, and press  .2Select the appropriate option to purchase the item, for example, “Buy”.3Carefully read all the information provided.To continue the download, select Accept. To cancel the download, select Cancel.End a connectionTo end the connection and view the browser page offline, select Options > Advanced options > Disconnect, or to end the connection and close the browser, select Options > Exit.Empty the cacheThe information or services you have accessed are stored in the cache memory of the device.A cache is a memory location that is used to store data temporarily. If you have tried to access or have accessed confidential information requiring passwords, empty the cache after each use. The information or services you have accessed are stored in the cache. To empty the cache, select Options > Advanced options > Clear cache.SettingsSelect Options > Settings and from the following:
Web browsers73Access point—Change the default access point. See ‘Connection’, p. 94. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.Homepage—Define the home page.Load imgs. & sounds—Select whether you want to load images while browsing. If you select No, to load images later during browsing, select Options > Show images.Font size—Select the text size.Auto. bookmarks—Enable or disable automatic bookmark collecting. If you want to continue collecting automatic bookmarks but hide the folder from the bookmarks view, select Hide folder.Screen size—Select what is shown when you are browsing: Select. keys only or Full screen.Search page—Define a Web page that is downloaded when you select Navigation options > Open search page in the bookmarks view, or when browsing.Volume—If you want the browser to play sounds embedded on Web pages, select a volume level.Rendering—If you want the page layout shown as accurately as possible when in Small screen mode, select By quality. If you do not want external cascading style sheets to be downloaded, select By speed.Cookies—Enable or disable the receiving and sending of cookies.Confirm touch tones—Select whether you want to confirm before the device sends touch tones during a voice call. See also ‘Options during a call’, p. 66.Java/ECMA script—Enable or disable the use of scripts.Security warnings—Hide or show security notifications.Default encoding—If text characters are not shown correctly, you can select another encoding according to language.WebPress , and select Applications > Web (network service).With this browser, you are able to view normal Web pages that use extensible hypertext markup language (XHTML) or hypertext markup language (HTML). You can zoom in and out on a page and read Web feeds and blogs.Check the availability of services, pricing, and fees with your network operator or service provider. Service providers will also give you instructions on how to use their services.
Web browsers74FCC DRAFTTo access pages, you need service settings for the page that you want to use. You may receive the settings in a special text message from the network operator or service provider that offers the page. See ‘Data and settings’, p. 53. For more information, contact your network operator or service provider.Web feeds and blogs Important: Use only services that you trust and that offer adequate security and protection against harmful software.Web feeds are xml files in Web pages that are widely used by the weblog community to share the latest entries' headlines or their full text, for example, recent news. It is common to find Web feeds on Web, Blog and Wiki pages. To subscribe to a Web feed on Web pages, select Options > Subscribe. To view the Web feeds you have subscribed to, in the Web bookmarks view, select Web feeds.Blogs or Weblogs are Web diaries. To download a Web feed or blog on the Web, scroll to it, and press the scroll key.Browse Important: Use only services that you trust and that offer adequate security and protection against harmful software.To download a page, select a bookmark, and press the scroll key. You can also enter the address in the field ( ).Keyboard shortcuts• Press   to close the current window if two or more windows are open.• Press   to open your bookmarks.• Press   to search for text in the current page.• Press   to return to the previous page.• Press   to list all open windows. • Press   to show the page overview. Press   again to zoom in and view the desired information.• Press   to go to a different Web page.• Press   to go to the start page.To zoom the page in or out, press   or  .To allow or prevent the automatic opening of multiple windows, select Options > Settings > Block pop-ups > Yes.To view the Web pages you have visited during the current browsing session, select Options > Navigation options > History. To have the list of the previous pages automatically shown when you return to the previous page, select Options > Settings > History list > On.Search informationYou can use Mini Map to view and search for information on Web pages that contain large amount of information.
Web browsers75When Mini Map is on, Web automatically zooms out and shows an overview of the Web page you browse. To move on the page, scroll right, left, up, or down. When you find the desired information, stop scrolling, and Mini Map takes you to the desired spot. To set Mini Map on, select Options > Settings > Mini Map > On.End connectionTo end the connection to the Web, select Options > Advanced options > Disconnect.To delete the information the network server collects about your visits to various Web pages, select Options > Advanced options > Delete cookies.To empty the temporary memory that stores information about your visits to different Web sites, select Options > Advanced options > Clear cache.
Connections76FCC DRAFTConnectionsBluetooth connectivityYou can connect wirelessly to other compatible devices with wireless Bluetooth technology. Compatible devices may include mobile phones, computers, and enhancements such as headsets and car kits. You can use Bluetooth connectivity to send images, video clips, music and sound clips, and notes; connect wirelessly to your compatible PC (for example, to transfer files); connect to a compatible printer to print images with Image print. See ‘Image print’, p. 32.Since devices with Bluetooth wireless technology communicate using radio waves, your device and the other device do not need to be in direct line-of-sight. The two devices only need to be within 10 meters (33 feet) of each other, but the connection may be subject to interference from obstructions such as walls or from other electronic devices.This device is compliant with Bluetooth Specification 2.0 supporting the following profiles: Basic Printing Profile, Dial-up Networking Profile, Headset Profile, Handsfree Profile, Object Push Profile, File Transfer Profile, Basic Imaging Profile, SIM Access profile, Synchronization Profile, and Human Interface Device Profile. To ensure interoperability between other devices supporting Bluetooth technology, use Nokia approved enhancements for this model. Check with the manufacturers of other devices to determine their compatibility with this device. Glossary: A profile corresponds to a service or a function, and defines how different devices connect. For example, the Handsfree Profile is used between the handsfree device and the mobile device. For devices to be compatible, they must support the same profiles.There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.Features using Bluetooth technology, or allowing such features to run in the background while using other features, increase the demand on battery power and reduce the battery life.When the device is locked, you cannot use Bluetooth connectivity. See ‘Security’, p. 96 for more information on locking the device.
Connections77SettingsPress , and select Tools > Bluetooth. When you open the application for the first time, you are asked to define a name for your device. After you set Bluetooth connectivity on and change My phone's visibility to Shown to all, your device and this name can be seen by other users with devices using Bluetooth wireless technology.Select from the following:Bluetooth—Select On or Off. To connect wirelessly to another compatible device, first set Bluetooth connectivity On, then establish a connection.My phone's visibility—To allow your device to be found by other devices with Bluetooth wireless technology, select Shown to all. To hide it from other devices, select Hidden.My phone's name—Edit the name of your device.Remote SIM mode—To enable another device, such as a compatible car kit enhancement, to use the SIM card in your device to connect to the network, select On.Remote SIM modeTo use the remote SIM mode with a compatible car kit enhancement, set Bluetooth connectivity on, and enable the use of the remote SIM mode with your device. Before the mode can be activated, the two devices must be paired and the pairing initiated from the other device. When pairing, use a 16-digit passcode, and set the other device as authorized. See ‘Pair devices’, p. 78. Activate the remote SIM mode from the other device.When remote SIM mode is on in your Nokia N73, Remote SIM is displayed in the standby mode. The connection to the wireless network is turned off, as indicated by   in the signal strength indicator area, and you cannot use SIM card services or features requiring cellular network coverage.When the wireless device is in the remote SIM mode, you can only use a compatible connected enhancement, such as a car kit, to make or receive calls. Your wireless device will not make any calls, except to the emergency numbers programmed into your device, while in this mode. To make calls from your device, you must first leave the remote SIM mode. If the device has been locked, enter the code to unlock it first.To leave the remote SIM mode, press the power key, and select Exit rem. SIM mode.Security tipsWhen you are not using Bluetooth connectivity, select Bluetooth > Off or My phone's visibility > Hidden. In this way, you can better control who can find your device with Bluetooth wireless technology, and connect to it.
Connections78FCC DRAFTDo not pair with an unknown device. In this way, you can better protect your device from harmful content.Send data using Bluetooth connectivitySeveral Bluetooth connections can be active at a time. For example, if you are connected to a compatible headset, you can also transfer files to another compatible device at the same time.Bluetooth connectivity indicators• When   is shown in the standby mode, Bluetooth connectivity is on.• When   is blinking, your device is trying to connect with another device.• When   is shown continuously, data is being transmitted using Bluetooth connectivity. Tip! To send text using Bluetooth connectivity, open Notes, write the text, and select Options > Send > Via Bluetooth.1Open the application where the item you want to send is stored. For example, to send an image to another compatible device, open Gallery.2Select the item and Options > Send > Via Bluetooth. Devices with Bluetooth wireless technology within range start to appear on the display.Device icons:   computer,   phone,   audio or video device, and   other device.To interrupt the search, select Stop.3Select the device with which you want to connect.4If the other device requires pairing before data can be transmitted, a tone sounds, and you are asked to enter a passcode. See ‘Pair devices’, p. 78.5When the connection has been established, Sending data is shown.The Sent folder in Messag. does not store messages sent using Bluetooth connectivity. Tip! When searching for devices, some devices may show only the unique address (device address). To find the unique address of your device, enter the code *#2820# in the standby mode.Pair devicesTo open the paired devices view ( ), in the Bluetooth application main view, press  .Before pairing, create your own passcode (1—16 digits), and agree with the owner of the other device to use the same code. Devices that do not have a user interface have a factory-set passcode. The passcode is used only once.To pair with a device, select Options > New paired device. Devices with Bluetooth wireless technology within range start to appear on the display. Select the device, and enter
Connections79the passcode. The same passcode must be entered on the other device as well. After pairing, the device is saved to the paired devices view.Paired devices are indicated by   in the device search. To set a device as authorized or unauthorized, scroll to a device, and select from the following options:Set as authorized—Connections between your device and this device can be made without your knowledge. No separate acceptance or authorization is needed. Use this status for your own devices, such as your compatible headset or PC, or devices that belong to someone you trust.  indicates authorized devices in the paired devices view.Set as unauthorized—Connection requests from this device must be accepted separately every time.To cancel a pairing, scroll to the device, and select Options > Delete. If you want to cancel all pairings, select Options > Delete all.Tip! If you are currently connected to a device and delete the pairing with that device, pairing is removed immediately, and the connection to the device is switched off.Receive data using Bluetooth connectivityWhen you receive data through Bluetooth connectivity, a tone sounds, and you are asked if you want to accept the message. If you accept,   is shown, and the item is placed in the Inbox folder in Messag.. Messages received through Bluetooth connectivity are indicated by  . See ‘Inbox—receive messages’, p. 52.Switch off Bluetooth connectivityTo switch off Bluetooth connectivity, select Bluetooth > Off.Infrared connectionWith infrared, you can transfer data such as business cards, calendar notes, and media files with a compatible device.Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser product.
Connections80FCC DRAFTSend and receive data using infrared1Make sure that the infrared ports of the sending and receiving devices are pointing at each other, and that there are no obstructions between the devices. The preferable distance between the two devices is up to 1 meter (3 feet).2The user of the receiving device activates the infrared port.To activate the infrared port of your device to receive data through infrared, press  , and select Tools > Infrared.3The user of the sending device selects the desired infrared function to start the data transfer.To send data through infrared, locate the desired file in an application or the file manager, and select Options > Send > Via infrared.If data transfer is not started within 1 minute after the activation of the infrared port, the connection is cancelled and must be started again.All items received through infrared are placed in the Inbox folder in Messaging. New infrared messages are indicated by .When   blinks, your device is trying to connect to the other device or a connection has been lost.When   is shown continuously, the infrared connection is active, and your device is ready to send and receive data using its infrared port.Data cablePress  , and select Tools > Data cbl.. In Data cable mode, select what the USB data cable connection is used for: PC Suite, Data transfer, or Image print. To have the device ask the purpose of the connection each time the cable is connected, select Ask on connection.PC connectionsYou can use your device with a variety of compatible PC connectivity and data communications applications. With Nokia PC Suite you can, for example, transfer images between your device and a compatible PC.Always create the connection from the PC to synchronize with your device.Your device as a modemYou can use your device as a modem to send and receive e-mail, or to connect to the Internet with a compatible PC by using Bluetooth connectivity, infrared, or a USB data
Connections81cable (network service). Detailed installation instructions can be found in the user guide for Nokia PC Suite.Tip! When using Nokia PC Suite for the first time, to connect your device to a compatible PC and to use Nokia PC Suite, use the Get Connected wizard available in Nokia PC Suite.Connection managerPress , and select Tools > Conn. mgr.. Data connectionsIn the active connections view, you can see the open data connections: data calls ( ), and packet data connections (). Note: The actual time invoiced for calls by your service provider may vary, depending on network features, rounding off for billing, and so forth.To end a connection, select Options > Disconnect. To close all open connections, select Options > Disconnect all.To view the details of a connection, select Options > Details. The details shown depend on the connection type.SynchronizationPress , and select Tools > Sync. Sync enables you to synchronize your notes, calendar, or contacts with various compatible calendar and contacts applications on a compatible computer or on the Internet. You can also create or edit synchronization settings.The synchronization application uses SyncML technology for synchronization. For information on SyncML compatibility, contact the supplier of the application with which you want to synchronize your device data.You may receive synchronization settings in a special text message. See ‘Data and settings’, p. 53.Synchronize dataIn the Sync main view, you can see the different synchronization profiles. A synchronization profile contains the necessary settings, for example which applications are synchronized, to synchronize data in your device with a remote database on a server or compatible device.1Select a synchronization profile and Options > Synchronize. The status of the synchronization is shown on the display.
Connections82FCC DRAFTTo cancel synchronization before it finishes, select Cancel.2You are notified when the synchronization is complete. Select Yes to view the log file showing the synchronization status and how many entries have been added, updated, deleted, or discarded (not synchronized) in your device or on the server.Device managerPress  , and select Tools > Dev. mgr.. You may receive server profiles and different configuration settings from your network operator, service provider, or company information management department. These configuration settings may include access point settings for data connections and other settings used by different applications in your device.To connect to a server and receive configuration settings for your device, scroll to a profile, and select Options > Start configuration.Server profile settingsContact your service provider for the correct settings. Server name—Enter a name for the configuration server.Server ID—Enter the unique ID to identify the configuration server.Server password—Enter a password to identify your device to the server.Access point—Select an access point to be used when connecting to the server.Host address—Enter the URL address of the server.Port—Enter the port number of the server.User name and Password—Enter your user name and password.Allow configuration—To receive configuration settings from the server, select Yes.Auto-accept all reqs.—If you want your device to ask for confirmation before accepting a configuration from the server, select No.Network authentic.—Select if network authentication is used.
Office83FCC DRAFTOfficeCalculatorTo add, substract, multiply, divide, and calculate square roots and percentages, press  , and select Office > Calculator. Note: This calculator has limited accuracy and is designed for simple calculations.ConverterTo convert measures from one unit to another, press  , and select Office > Converter.Converter has limited accuracy, and rounding errors may occur.1In the Type field, select the measure you want to use.2In first Unit field, select the unit from which you want to convert. In the next Unit field, select the unit to which you want to convert.3In the first Amount field, enter the value you want to convert. The other Amount field changes automatically to show the converted value.Set base currency and exchange ratesSelect Type > Currency > Options > Currency rates. Before you can make currency conversions, you must select a base currency and add exchange rates. The rate of the base currency is always 1. Note: When you change base currency, you must enter new exchange rates because all previously set exchange rates are cleared.NotesTo write notes, press  , and select Office > Notes. You can send notes to compatible devices, and save plain text files (.txt format) that you receive to Notes.To print a note on a compatible Basic Print Profile (BPP) equipped printer with Bluetooth connectivity (such as HP Deskjet 450 Mobile Printer or HP Photosmart 8150), select Options > Print.
Office84RecorderTo record voice memos, press  , and select Office > Recorder. To record a telephone conversation, open Recorder during a voice call. Both parties hear a tone every 5 seconds during recording.QuickofficeTo use the Quickoffice applications, press  , and select Office > Quickoffice. A list of files in the .doc, .xls, and .ppt file formats saved on your device in the C:\Data\Documents and the E:\Documents folder and subfolders on the memory card opens.To open a file in its respective application, press  . To sort files, select Options > Sort files.To open Quickword, Quicksheet, or Quickpoint, press  to reach the desired view.QuickwordWith Quickword, you can view native Microsoft Word documents on the display of your device. Quickword supports colors, bold, italics, and underline.Quickword supports the viewing of documents saved in .doc format from Microsoft Word 97 or later. Not all variations or features of the mentioned file formats are supported.See also ‘More information’, p. 85.View Word documentsTo move in the document, use the scroll key.To search the document for text, select Options > Search.You can also select Options and from the following:Go to—to move to the start, end, or selected position within the documentZoom—to zoom in or outStart Autoscroll—to start automatic scrolling through the document. To stop scrolling, press  .QuicksheetWith Quicksheet, you can read Microsoft Excel files on the display of your device.Quicksheet supports the viewing of spreadsheet files saved in .xls format from Microsoft Excel 97 or later. Not all variations or features of the mentioned file formats are supported.See also ‘More information’, p. 85.
Office85FCC DRAFTView spreadsheetsTo move around in the spreadsheet, use the scroll key.To switch between worksheets, select Options > Pan.To search the speadsheet for a text within a value or formula, select Options > Find.To change how the spreadsheet is displayed, select Options and from the following:Navigate—to navigate within the current worksheet by blocks. A block contains columns and rows displayed by a screen. To display the columns and rows, use the scroll key to select a block and OK.Zoom—to zoom in or outFreeze panes—to keep the highlighted row, column, or both visible while you move in the spreadsheetResize—to adjust the size of columns or rowsQuickpointWith Quickpoint, you can view Microsoft PowerPoint presentations on the display of your device.Quickpoint supports the viewing of presentations created in .ppt format from Microsoft PowerPoint 2000 or later. Not all variations or features of the mentioned file formats are supported.See also ‘More information’, p. 85.View presentationsTo move between the slide, outline, and the notes view, press  or .To move to the next or previous slide in the presentation, press  or .To view the presentation in full screen, select Options > Full screen.To expand items in the presentation outline in the outline view, select Options > Expand entry.More informationIf you experience problems with Quickword, Quicksheet, or Quickpoint, visit www.quickoffice.com for more information. Support is also available by sending an e-mail to supportS60@quickoffice.com.Adobe ReaderWith Adobe Reader you can read PDF documents on the display of your device.
Office86This application has been optimized for PDF document content on handsets and other mobile devices, and provides only a limited set of features compared with PC versions. Note: This application is only available in a limited number of languages.To access and open documents:•Press  , and select Office > Adobe PDF. Select Options > Browse for file to browse and open documents stored in the device memory and on a compatible memory card.• Open an e-mail attachment from received e-mail messages (network service).• Send a document using Bluetooth connectivity to your Inbox in Messag..•Use File mgr. to browse and open documents stored in the device memory and on the memory card.• Browse Web pages. Ensure your device is set up with an Internet access point before browsing. See ‘Access points’, p. 94.Manage PDF filesTo browse and manage PDF files, press  , and select Office > Adobe PDF. Your recent files are listed in the file view. To open a document, scroll to it, and press  .You can also select Options and from the following:Browse for file—to browse for PDF files in the device memory or on a compatible memory card.Settings—to modify default zoom level and viewing mode of PDF documents.View PDF filesWhen a PDF file is open, select Options and one of the following:Zoom—to zoom in, out, or to a selected percentage. You can also resize the document to the screen width, or fit the whole PDF page to the screen.Find—to search the document for a text.View—to view the document in full screen. You can also rotate the PDF document by 90 degrees in either direction.Go to—to move to a selected page, next page, previous page, first page, or last page. Save—to save the file to device memory or a compatible memory card.Settings—to modify default zoom level and default viewing mode.Details—to display the properties of the PDF document.
Office87FCC DRAFTMore informationFor more information, visit www.adobe.com.To share questions, suggestions, and information about the application, visit the Adobe Reader for Symbian OS user forum at http://adobe.com/support/forums.
Personalize your device88FCC DRAFTPersonalize your device• To use the standby display for fast access to your most frequently used applications, see ‘Active standby mode’, p. 91.• To change the standby mode background image or what is shown in the screen saver, see ‘Change the look of your device’, p. 90.• To customize the ringing tones, see ‘Profiles—set tones’, p. 88 and ‘Add ringing tones for contacts’, p. 63.• To change the shortcuts assigned for the different presses of the scroll key and left and right selection keys in the standby mode, see ‘Standby mode’, p. 92. • To change the clock shown in the standby mode, press , and selectApplications > Clock > Options > Settings > Clock type > Analog or Digital.• To change the welcome note to an image or animation, press  , and select Tools > Settings > Phone > General > Welcome note / logo.• To change the main menu view, in the main menu, select Options > Change view > Grid or List.• To rearrange the main menu, in the main menu, select Options > Move, Move to folder, or New folder. You can move less used applications into folders, and place applications that you use more often into the main menu.Profiles—set tonesTo set and customize the ringing tones, message alert tones, and other tones for different events, environments, or caller groups, press  , and select Tools > Profiles.To change the profile, press   in the standby mode. Scroll to the profile you want to activate, and select OK.To modify a profile, press  , and select Tools > Profiles. Scroll to the profile, and select Options > Customize. Scroll to the setting you want to change, and press   to open the choices. Tones stored on the memory card are indicated with  . You can scroll through the tone list and listen to each one before you make your selection. To stop the sound, press any key.
Personalize your device89When you choose a tone, Tone downloads (network service) opens a list of bookmarks. You can select a bookmark and start connection to a Web page to download tones.If you want the caller’s name to be said when your device rings, select Options > Customize, and set Say caller's name to On. The caller’s name must be saved in Contacts.To create a new profile, select Options > Create new.Offline profileThe Offline profile lets you use the device without connecting to the wireless network. When you activate the Offline profile, the connection to the wireless network is turned off, as indicated by   in the signal strength indicator area. All wireless RF signals to and from the device are prevented. If you try to send messages, they are placed in the outbox to be sent later. Warning: In the offline profile you cannot make (or receive) any calls, except make calls to certain emergency numbers, or use other features that require network coverage. To make calls, you must first activate the phone function by changing profiles. If the device has been locked, enter the lock code.To leave the Offline profile, press the power key, and select another profile. The device re-enables wireless transmissions (providing there is sufficient signal strength). If Bluetooth connectivity is activated before entering the Offline profile, it will be deactivated. Bluetooth connectivity is automatically reactivated after leaving the Offline profile. See ‘Settings’, p. 77.3-D tonesPress , and select Applications > 3-D tones. With 3-D tones you can enable three-dimensional sound effects for ringing tones. Not all ringing tones support 3-D effects.To enable the 3-D effects, select 3-D ringing tone effects > On. To change the ringing tone, scroll to the ringing tone that is displayed, press  , and select the desired ringing tone.To change the 3–D effect that is applied to the ringing tone, select Sound trajectory and the desired effect. To modify the effect, select from the following settings:Trajectory speed—Select the speed at which sound moves from one direction to another. This setting is not available for all ringing tones.Reverberation—To adjust the amount of echo, select the desired effect in the list.
Personalize your device90FCC DRAFTDoppler effect—Select On to have the ringing tone sound higher when you are closer to your device, and lower when you are farther away. When you get closer to the device, the ringing tone appears to become higher, and lower when you move away from it. This setting is not available for all ringing tones.To listen to the ringing tone with the 3–D effect, select Options > Play toneIf you enable the 3-D tones but do not select any 3-D effect, stereo widening is applied to the ringing tone.To adjust the ringing tone volume, select Tools > Profiles > Options > Customize > Ringing volume.Change the look of your deviceTo change the look of the display, such as the wallpaper and icons, press  , and select Tools > Themes. The active theme is indicated by  . In Themes you can group together elements from other themes or select images from the Gallery to personalize themes further. The themes on the memory card (if inserted) are indicated by . The themes on the memory card are not available if the memory card is not inserted in the device. If you want to use the themes saved in the memory card without the memory card, save the themes in the device memory first.To open a browser connection and download more themes, select Theme downloads (network service). Important: Use only services that you trust and that offer adequate security and protection against harmful software.To activate a theme, scroll to it, and select Options > Apply. To preview a theme before activating it, select Options > Preview.To edit themes, scroll to a theme, and select Options > Edit to change the Wallpaper and Power saver settings.To restore the selected theme to its original settings, select Options > Restore orig. theme when you edit a theme.
Personalize your device91Active standby modeUse your standby display for fast access to your most frequently used applications. By default, the active standby mode is on.Press , select Tools > Settings > Phone > Standby mode > Active standby, and press   to switch the active standby on or off.The active standby display is shown with default applications across the top of the screen, and calendar, to-do, and player events listed below.Scroll to an application or event, and press  .The standard scroll key shortcuts available in the standby mode cannot be used when the active standby mode is on.To change the default applications’ shortcuts, press  , select Tools > Settings > Phone > Standby mode > Active standby apps., and press  .Some shortcuts may be fixed, and you are not able to change them.
Tools92FCC DRAFTToolsSettingsTo change settings, press  , and select Tools > Settings. To open a settings group, press  . Scroll to a setting you want to change, and press  .Some settings may be preset for the device by your network operator or service provider, and you may not be able to change them.PhoneGeneralPhone language—Changing the language of the display texts in your device also affects the format used for date and time and the separators used, for example, in calculations. Automatic selects the language according to the information on your SIM card. After you change the display text language, the device restarts.Changing the settings for Phone language or Writing language affects every application in your device, and the change remains effective until you change these settings again.Writing language—Changing the language affects the characters and special characters available when writing text and the predictive text dictionary used.Predictive text—Set the predictive text input On or Off for all editors in the device. The predictive text dictionary is not available for all languages.Welcome note / logo—The welcome note or logo is displayed briefly each time you switch on the device. Select Default to use the default image, Text to write a welcome note, or Image to select an image from Gallery.Orig. phone settings—You can reset some of the settings to their original values. To do this, you need the lock code. See ‘Security’, ‘Phone and SIM’, p. 97. After resetting, the device may take a longer time to power on. Documents and files are unaffected.Standby modeActive standby—Use shortcuts to applications in the standby mode. See ‘Active standby mode’, p. 91.Left selection key—Assign a shortcut to the left selection key ( ) in the standby mode.
Tools93Right selection key—Assign a shortcut to the right selection key ( ) in the standby mode.Active standby apps.—Select the application shortcuts you want to appear in the active standby. This setting is only available if Active standby is on.You can also assign keypad shortcuts for the different presses of the scroll key. The scroll key shortcuts are not available if the active standby is on.Operator logo—This setting is only available if you have received and saved an operator logo. Select Off if you do not want the logo to be shown.DisplayLight sensor—Press   or   to change the light sensor mode, and to brighten or darken the display.Power saver time-out—Select the time-out period after which the power saver is activated.Light time-out—Select a time-out after which the backlight of the display is switched off.Call settingsSend my caller ID—You can set your phone number to be displayed to (Yes) or hidden from (No) the person to whom you are calling, or the value may be set by your network operator or service provider when you make a subscription (Set by network) (network service).Call waiting—If you have activated call waiting (network service), the network notifies you of a new incoming call while you have a call in progress. Set the function on (Activate) or off (Cancel), or check whether the function is activated (Check status).Reject call with SMS—Select Yes to send a text message to a caller informing why you could not answer the call. See ‘Answer or decline a call’, p. 66.Message text—Write a text to be sent in a text message when you decline a call.Automatic redial—Select On, and your device makes a maximum of 10 attempts to connect the call after an unsuccessful call attempt. To stop automatic redialing, press .Summary after call—Activate this setting if you want the device to briefly display the approximate duration of the last call.1-touch dialing—Select On, and the numbers assigned to the 1-touch dialing keys (  -  ) can be dialed by pressing and holding the key. See also ‘1-touch dial a phone number’, p. 65.
Tools94FCC DRAFTAnykey answer—Select On, and you can answer an incoming call by briefly pressing any keypad key, except , , , and .Line in use—This setting (network service) is shown only if the SIM card supports two subscriber numbers, that is, two phone lines. Select which phone line you want to use for making calls and sending text messages. Calls on both lines can be answered irrespective of the selected line. If you select Line 2 and have not subscribed to this network service, you will not be able to make calls. When line 2 is selected,   is shown in the standby mode. Tip! To switch between the phone lines, press and hold   in the standby mode.Line change—To prevent line selection (network service), select Disable if supported by your SIM card. To change this setting, you need the PIN2 code.ConnectionData connections and access pointsYour device supports packet data connections (network service), such as GPRS in the GSM network. When you use your device in GSM network, multiple data connections can be active at the same time, and access points can share a data connection.To establish a data connection, an access point is required. You can define different kinds of access points, such as:• MMS access point to send and receive multimedia messages• Access point for the Web application to view WML or XHTML pages• Internet access point (IAP) to send and receive e-mail and connect to the InternetCheck the type of access point you need with your service provider for the service you want to access. For availability and subscription to packet data connection services, contact your network operator or service provider.Access pointsYou may receive access point settings in a message from a service provider. See ‘Data and settings’, p. 53. Some or all access points may be preset for your device by your service provider or network operator, and you may not be able to change, create, edit, or remove them.   indicates a protected access point, and   indicates a packet data access point.To create a new access point, select Options > New access point. Select Use default settings to use the default access point settings, or Use existing settings to select an existing access point as the basis for the new access point.To edit the settings of an access point, select Options > Edit. Follow the instructions from your service provider.
Tools95Connection name—Enter a descriptive name for the connection.Data bearer—Select the data connection type.Depending on the data connection you select, only certain setting fields are available. Fill in all fields marked with Must be defined or with a red asterisk. Other fields can be left empty, unless you have been instructed otherwise by your service provider.To be able to use a data connection, the network service provider must support this feature, and if necessary, activate it for your SIM card.Packet dataFollow the instructions from your service provider.Access point name—You obtain the access point name from your network operator or service provider.User name—The user name may be needed to make a data connection, and is usually provided by the service provider.Prompt password—If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes.Password—A password may be needed to make a data connection, and is usually provided by the service provider.Authentication—Select Normal or Secure.Homepage—Depending on the access point you are setting up, enter the Web address or the address of the multimedia messaging center.Select Options > Advanced settings to change the following settings:Network type—Select the Internet protocol type to use: IPv4 settings or IPv6 settings. The other settings depend on the selected network type.Phone IP address (for IPv4 only)—Enter the IP address of your device. DNS address—In Primary name serv.:, enter the IP address of the primary DNS server. In Second. name server:, enter the IP address of the secondary DNS server. Contact your Internet service provider to obtain these addresses.Proxy serv. address—Define the address for the proxy server.Proxy port number—Enter the proxy port number.Packet dataThe packet data settings affect all access points using a packet data connection.Packet data conn.—If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active
Tools96FCC DRAFTpacket data connection (for example, to send and receive e-mail) is quicker. If there is no packet data coverage, the device periodically tries to establish a packet data connection. If you select When needed, the device uses a packet data connection only if you start an application or action that needs it.Access point—The access point name is needed to use your device as a packet data modem to your computer.ConfigurationsYou may receive trusted server settings from your network operator or service provider in a configuration message, or the settings may be stored on your (U)SIM card. You can save these settings to your device, view, or delete them in Configs..SIP settingsSIP (Session Initiation Protocol) settings are needed for certain network services using SIP. You may receive the settings in a special text message from your network operator or service provider. You can view, delete, or create these setting profiles in SIP settings.Date and timeSee ‘Clock settings’, p.  45, and language settings in ‘General’, p. 92.SecurityPhone and SIMPIN code request—When active, the code is requested each time the device is switched on. Deactivating the personal identification number (PIN) code request may not be allowed by some SIM cards. See ‘Glossary of PIN and lock codes’, p. 97.PIN code, PIN2 code, and Lock code—You can change the lock code, PIN code, and PIN2 code. These codes can only include the numbers from 0 to 9. If you forget any of these codes, contact your service provider. See ‘Glossary of PIN and lock codes’, p. 97.Avoid using access codes similar to the emergency numbers to prevent accidental dialing of the emergency number.Autolock period—You can set an autolock period, a time-out after which the device automatically locks. To turn off the autolock period, select None.To unlock the device, enter the lock code.When the device is locked, calls still may be possible to the official emergency number programmed into your device. Tip! To lock the device manually, press  . A list of commands opens. Select Lock phone.
Tools97Lock if SIM changed—You can set the device to ask for the lock code when an unknown SIM card is inserted into your device. The device maintains a list of SIM cards that are recognized as the owner’s cards.Closed user group—You can specify a group of people to whom you can call and who can call you (network service).When calls are limited to closed user groups, calls may be possible to the official emergency number programmed into your device.Confirm SIM services—You can set the device to display confirmation messages when you are using a SIM card service (network service).Glossary of PIN and lock codesIf you forget any of these codes, contact your service provider.Personal identification number (PIN) code—This code protects your SIM card against unauthorized use. The PIN code (4 to 8 digits) is usually supplied with the SIM card. After three consecutive incorrect PIN code entries, the code is blocked, and you need the PUK code to unblock it.UPIN code—This code may be supplied with the USIM card. The USIM card is an enhanced version of the SIM card.PIN2 code—This code (4 to 8 digits) is supplied with some SIM cards, and is required to access some functions in your device.Lock code (also known as security code)—This code (5 digits) can be used to lock the device to avoid unauthorized use. The factory setting for the lock code is 12345. To avoid unauthorized use of your device, change the lock code. Keep the new code secret and in a safe place separate from your device. If you forget the code, contact your service provider.Personal unblocking key (PUK) code and PUK2 code—These codes (8 digits) are required to change a blocked PIN code or PIN2 code, respectively. If the codes are not supplied with the SIM card, contact the operator whose SIM card is in your device.UPUK code—This code (8 digits) is required to change a blocked UPIN code. If the code is not supplied with the USIM card, contact the operator whose USIM card is in your device.Certificate managementDigital certificates do not guarantee safety; they are used to verify the origin of software.In the certificate management main view, you can see a list of authority certificates that are stored in your device. Press   to see a list of personal certificates, if available.Digital certificates should be used if you want to connect to an online bank or another site or remote server for actions that involve transferring confidential information.
Tools98FCC DRAFTThey should also be used if you want to reduce the risk of viruses or other malicious software and be sure of the authenticity of software when downloading and installing software. Important: Even if the use of certificates makes the risks involved in remote connections and software installation considerably smaller, they must be used correctly in order to benefit from increased security. The existence of a certificate does not offer any protection by itself; the certificate manager must contain correct, authentic, or trusted certificates for increased security to be available. Certificates have a restricted lifetime. If Expired certificate or Certificate not valid yet is shown even if the certificate should be valid, check that the current date and time in your device are correct.View certificate details—check authenticityYou can only be sure of the correct identity of a server when the signature and the period of validity of a server certificate have been checked.You are notified if the identity of the server is not authentic or if you do not have the correct security certificate in your device.To check certificate details, scroll to a certificate, and select Options > Certificate details. When you open certificate details, the validity of the certificate is checked, and one of the following notes may be displayed:•Certificate not trusted—You have not set any application to use the certificate. See ‘Change the trust settings’, p. 98.•Expired certificate—The period of validity has ended for the selected certificate.•Certificate not valid yet—The period of validity has not yet begun for the selected certificate.•Certificate corrupted—The certificate cannot be used. Contact the certificate issuer.Change the trust settingsBefore changing any certificate settings, you must make sure that you really trust the owner of the certificate and that the certificate really belongs to the listed owner.Scroll to an authority certificate, and select Options > Trust settings. Depending on the certificate, a list of the applications that can use the selected certificate is shown. For example:•Symbian installation: Yes—The certificate is able to certify the origin of a new Symbian operating system application.•Internet: Yes—The certificate is able to certify servers.•App. installation: Yes—The certificate is able to certify the origin of a new JavaTM application.Select Options > Edit trust setting to change the value.
Tools99Track protected objectSome copyright-protected music files may include a transaction identifier. Select whether you allow the identifier to be sent with the music file if you send or forward the file. The provider of the music file can use the identifier to track the distribution of the files.Security moduleTo view or edit a security module (if available) in Secur. mod., scroll to it, and press the scroll key. To view detailed information about a security module, scroll to it, and select Options > Security details.Call forwardingCall forwarding allows you to forward your incoming calls to your voice mailbox or another phone number. For details, contact your service provider.Select which calls you want to forward and the desired forwarding option. To forward voice calls when your number is busy or when you decline incoming calls, select If busy. Set the option on (Activate) or off (Cancel), or check whether the option is activated (Check status).Several forwarding options can be active at the same time. When all calls are forwarded,   is shown in the standby mode.Call restricting and call forwarding cannot be active at the same time.Call restriction Call restriction (network service) allows you to restrict the calls that you make or receive with the device. To change the settings, you need the restriction password from your service provider.Select the desired restricting option, and set it on (Activate) or off (Cancel), or check whether the option is active (Check status). Call restriction affects all calls, including data calls.Call restrictng and call forwarding cannot be active at the same time.When calls are restricted, calls may be possible to the official emergency number programmed into your device.NetworkOperator selection—Select Automatic to set the device to search for and select one of the available networks, or Manual to manually select the network from a list of networks. If the connection to the manually selected network is lost, the device sounds an error tone and asks
Tools100FCC DRAFTyou to reselect a network. The selected network must have a roaming agreement with your home network, that is, the operator whose SIM card is in your device. Glossary: A roaming agreement is an agreement between two or more network service providers to enable the users of one service provider to use the services of other service providers.Cell info display—Select On to set the device to indicate when it is used in a cellular network based on microcellular network (MCN) technology and to activate cell info reception.EnhancementIn the standby mode,   indicates a compatible headset is connected, and   that the headset is unavailable, or a Bluetooth connection to a headset is lost.   indicates a compatible loopset is connected and   that a compatible TTY is connected.Select Headset, Loopset, TTY, Bluetooth handsfree, or Car kit and from the following:Default profile—Set the profile that you want activated each time you connect a certain compatible enhancement to your device. See ‘Profiles—set tones’, p. 88. Automatic answer—Set if you want the device to answer an incoming call automatically after 5 seconds. If the ringing type is set to Beep once or Silent, automatic answer is disabled. Automatic answer is not available for TTY.Lights—Set whether lights remain on, or are switched off after the time-out. This setting is not available for all enhancements.If you are using a TTY, you must activate it on your device. Press  , and select Tools > Settings > Enhancement > TTY > Use TTY > Yes.Voice commandsYou can use voice commands to control your device. For more information about the enhanced voice commands supported by your device, see ‘Voice dialing’, p. 65.To activate enhanced voice commands for starting applications and profiles, you must open the Voice cm. application and its Profiles folder. Press  , and select Tools > Voice cm. > Profiles; the device creates voice tags for the applications and profiles. To use enhanced voice commands, press and hold   in the standby mode, and say a voice command. The voice command is the name of the application or profile displayed in the list.
Tools101To add more applications to the list, select Options > New application. To add a second voice command that can be used to start the application, select Options > Change command, and enter the new voice command as text. Avoid very short names, abbreviations, and acronyms.To listen to the synthesized voice tag, select Options > Playback.To change voice command settings, select Options > Settings. To switch off the synthesizer that plays recognized voice tags and commands in the selected device language, select Synthesizer > Off. To reset voice recognition learning, for example, when the main user of the device has changed, select Reset voice adapts..Application managerPress , and select Tools > App. mgr.. You can install two types of applications and software to your device:• J2ME applications based on Java technology with the extension .jad or .jar ( ). • Other applications and software suitable for the Symbian operating system ( ). The installation files have the .sis extension. Only install software specifically designed for your Nokia N73. Software providers will often refer to the official model number of this product: the Nokia N73-5.Installation files may be transferred to your device from a compatible computer, downloaded during browsing, or sent to you in a multimedia message, as an e-mail attachment, or using Bluetooth connectivity or infrared. You can use Nokia Application Installer in Nokia PC Suite to install an application to your device. If you use Microsoft Windows Explorer to transfer a file, save the file to a compatible memory card (local disk).Install applications and software   indicates a .sis application,   a Java application,  that the application is not fully installed,and   that the application is installed on the memory card. Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.Before installation, note the following:• To view the application type, version number, and the supplier or manufacturer of the application, select Options > View details.• To display the security certificate details of the application, select Options > View certificate. See ‘Certificate management’, p. 97.
Tools102FCC DRAFT• If you install a file that contains an update or repair to an existing application, you can only restore the original application if you have the original installation file or a full back-up copy of the removed software package. To restore the original application, remove the application, and install the application again from the original installation file or the back-up copy.• The .jar file is required for installing Java applications. If it is missing, the device may ask you to download it. If there is no access point defined for the application, you are asked to select one. When you are downloading the .jar file, you may need to enter a user name and password to access the server. You obtain these from the supplier or manufacturer of the application.1To locate an installation file, press  , and select Tools > App. mgr.. Alternatively, search the device memory or a compatible memory card (if inserted) in File mgr., or open a message in Messag. > Inbox that contains an installation file.2In App. mgr., select Options > Install. In other applications, scroll to the installation file, and press    to start the installation.During installation, the device shows information about the progress of the installation. If you are installing an application without a digital signature or certification, the device displays a warning. Continue installation only if you are sure of the origin and contents of the application.To start an installed application, locate it in the menu, and press .To start a network connection and to view extra information about the application, select Options > Go to web address, if available.To see what software packages are installed or removed and when, select Options > View log. Important: Your device can only support one antivirus application. Having more than one application with antivirus functionality could affect performance and operation or cause the device to stop functioning.Remove applications and softwareScroll to a software package, and select Options > Remove. Select Yes to confirm.If you remove software, you can only reinstall it if you have the original software package or a full backup of the removed software package. If you remove a software package, you may no longer be able to open documents created with that software.If another software package depends on the software package that you removed, the other software package
Tools103may stop working. Refer to the documentation of the installed software package for details.SettingsSelect Options > Settings and from the following:Online certif. check—Select to check the online certificates before installing an application.Default web address—Set the default address used when checking online certificates.Some Java applications may require a phone call, a message to be sent, or a network connection to a specific access point for downloading extra data or components. In the App. mgr. main view, scroll to an application, and select Options > Suite settings to change settings related to that specific application.Digital Rights ManagementContent owners may use different types of digital rights management technologies (DRM) to protect their intellectual property, including copyrights. This device uses various types of DRM software to access DRM-protected content. With this device you can access content protected with OMA DRM 2.0 and OMA DRM 1.0. If certain DRM software fails to protect the content, content owners may ask that such DRM software's ability to access new DRM-protected content be revoked. Revocation may also prevent renewal of such DRM-protected content already in your device. Revocation of such DRM software does not affect the use of content protected with other types of DRM or the use of non-DRM-protected content.To view the digital rights activation keys stored in your device, press  , and select Tools > Actv. keys and from the following:Valid keys—View keys that are connected to one or more media files and keys whose validity period has not started yet.Invalid keys—View keys that are not valid; the time period for using the media file is exceeded or there is a protected media file in the device but no connected activation key.Not in use—View keys that have no media files connected to them in the device.To buy more usage time or extend the usage period for a media file, select an invalid activation key and Options > Get activation key. Activation keys cannot be updated if Web service message reception is disabled. See ‘Web service messages’, p. 54.To view detailed information, such as the validity status and ability to send the file, scroll to an activation key, and press .
Troubleshooting: Q&A104FCC DRAFTTroubleshooting: Q&AAccess codesQ: What is my password for the lock, PIN, or PUK codes?A: The default lock code is 12345. If you forget or lose the lock code, contact your device dealer.If you forget or lose a PIN or PUK code, or if you have not received such a code, contact your network operator.For information about passwords, contact your access point provider, for example, a commercial Internet service provider (ISP), service provider, or network operator.Application not respondingQ: How do I close an application that is not responding?A: To open the application switching window, press and hold . Scroll to the application, and press   to close the application.Bluetooth connectivityQ: Why can’t I find my friend’s device?A: Check that both devices have activated Bluetooth connectivity.Check that the distance between the two devices is not over 10 meters (33 feet) and that there are no walls or other obstructions between the devices.Check that the other device is not in hidden mode.Check that both devices are compatible.Q: Why can’t I end a Bluetooth connection?A: If another device is connected to your device, you can either end the connection using the other device or by deactivating Bluetooth connectivity. Select Tools > Bluetooth > Off.Browser servicesQ: What do I do if the following message is displayed: No valid access point defined. Define one in Services settings.? A: Insert the correct browser settings. Contact your service provider for instructions. CameraQ: Why do images look smudgy?A: Remove the protective plastic films covering the display and camera. Ensure that the camera lens protection window is clean.Q: Why do I get an error message “Application already in use” when I try to activate the camera ?A: The camera application may be active in the background. To check whether the camera is active or not, press and hold . The application switching window opens. If the camera is active, to return to the camera, scroll to it on the list, and press the scroll key. To close the camera application, press  .
Troubleshooting: Q&A105DisplayQ: Why do missing, discolored, or bright dots appear on the screen every time I turn on my device?A: This is a characteristic of this type of display. Some displays may contain pixels or dots that remain on or off. This is normal, not a fault.LogQ: Why does the log appear empty?A: You may have activated a filter, and no communication events fitting that filter have been logged. To see all events, select Applications > Log > Options > Filter > All communication. Also if you change the (U)SIM card, the log information is cleared.Memory lowQ: What can I do if my device memory is low?A: You can delete the following items regularly to avoid memory getting low:• Messages from Inbox, Drafts, and Sent folders in Messag.• Retrieved e-mail messages from the device memory• Saved browser pages• Images and videos in GalleryTo delete contact information, calendar notes, call timers, call cost timers, game scores, or any other data, go to the respective application to remove the data. If you are deleting multiple items and one of the following notes are shown: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data., try deleting items one by one (starting from the smallest item).Installation files (.sis) of applications that are stored in the device memory remain in the memory after the application has been installed to a compatible miniSD card. Remove such installation files from the device memory. To do this, first backup the installation file to a compatible PC using Nokia PC Suite, then remove the installation file from the device memory using File mgr. (see ‘File manager’ , p. 14).Q: How can I save my data before deleting it?A: Save your data using one of the following methods:• Use Nokia PC Suite to make a backup copy of all data to a compatible computer.• Send images to your e-mail address, then save the images to your computer.• Send data using Bluetooth connectivity to a compatible device.• Store data on a compatible memory card.MessagingQ: Why can’t I select a contact?A: The contact card does not have a phone number or an e-mail address. Add the missing information to the contact card in Contacts.Multimedia messagingQ: What should I do when the device cannot receive a multimedia message because memory is full?
Troubleshooting: Q&A106FCC DRAFTA: The amount of memory needed is indicated in the error message: Not enough memory to retrieve message. Delete some data first. To view what kind of data you have and how much memory the different data groups consume, select File manager > Options > Memory details.Q: The note Retrieving message is shown briefly. What is happening? A: The device is trying to retrieve a multimedia message from the multimedia messaging center.Check that the settings for multimedia messaging are defined correctly and that there are no mistakes in phone numbers or addresses. Select Messaging > Options > Settings > Multim. msg..Q: How can I end the data connection when the device starts a data connection again and again? A: To stop the device from making a data connection, select Messaging and one of the following:On receiving msg. > Defer retrieval—To have the multimedia messaging center save the message to be retrieved later, for example, after you have checked the settings. After this change, the device still needs to send information notes to the network. To retrieve the message now, select Retr. immediately.On receiving msg. > Reject message—To reject all incoming multimedia messages. After this change, the device needs to send information notes to the network, and the multimedia messaging center deletes multimedia messages that are waiting to be sent to you.Multimedia recept. > Off—To ignore all incoming multimedia messages. After this change, the device does not make any network connections related to multimedia messaging. PC connectivityQ: Why do I have problems in connecting the device to my PC?A: Make sure that Nokia PC Suite is installed and running on your PC. See the user guide for Nokia PC Suite on the CD-ROM. For further information on how to use Nokia PC Suite, see the help function on Nokia PC Suite or visit the support pages at www.nokiausa.com.Q: Can I use my device as a fax modem with a compatible PC?A: You cannot use your device as a fax modem. However, with call forwarding (network service), you can forward incoming fax calls to another phone number.
Product safety107FCC DRAFTProduct safetyBattery informationCharging and dischargingYour device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times but it will eventually wear out. When the talk and standby times are noticeably shorter than normal, replace the battery. Use only Nokia approved batteries, and recharge your battery only with Nokia approved chargers designated for this device.If a replacement battery is being used for the first time or if the battery has not been used for a prolonged period, it may be necessary to connect the charger then disconnect and reconnect it to begin charging the battery.Unplug the charger from the electrical plug and the device when not in use. Do not leave a fully charged battery connected to a charger, since overcharging may shorten its lifetime. If left unused, a fully charged battery will lose its charge over time.If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.Use the battery only for its intended purpose. Never use any charger or battery that is damaged.Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes direct connection of the positive (+) and negative (-) terminals of the battery. (These look like metal strips on the battery.) This might happen, for example, when you carry a spare battery in your pocket or purse. Short-circuiting the terminals may damage the battery or the connecting object.Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing.Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of
Product safety108batteries according to local regulations. Please recycle when possible. Do not dispose as household waste.Do not dismantle, open or shred cells or batteries. In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. In the event of leak or a hazard seek medical help immediately.Operation timesThe BP-6M battery provides up to 4.1 hours of talk time and up to 350 hours of standby time.Operation times are estimates and may vary depending on the SIM card, network conditions, charging, and device use. Nokia battery authentication guidelinesAlways use original Nokia batteries for your safety. To check that you are getting an original Nokia battery, purchase it from an authorized Nokia dealer, look for the Nokia Original Enhancements logo on the packaging, and inspect the hologram label using the following steps:Successful completion of the four steps is not a total assurance of the authenticity of the battery. If you have any reason to believe that your battery is not an authentic original Nokia battery, you should refrain from using it and take it to the nearest authorized Nokia service point or dealer for assistance. Your authorized Nokia service point or dealer will inspect the battery for authenticity. If authenticity cannot be verified, return the battery to the place of purchase.Authenticate hologram1 When looking at the hologram on the label, you should see the Nokia connecting hands symbol from one angle and the Nokia Original Enhancements logo when looking from another angle.2 When you angle the hologram left, right, down, and up, you should see 1, 2, 3, and 4 dots on each side respectively.
Product safety109FCC DRAFT3 Scratch the side of the label to reveal a 20-digit code, for example, 12345678919876543210. Turn the battery so that the numbers are facing upwards. The 20-digit code reads starting from the number at the top row followed by the bottom row.4 Confirm that the 20-digit code is valid by following the instructions at www.nokia.com/batterycheck.What if your battery is not authentic?If you cannot confirm that your Nokia battery with the hologram on the label is an authentic Nokia battery, please do not use the battery. Take it to the nearest authorized Nokia service point or dealer for assistance. The use of a battery that is not approved by the manufacturer may be dangerous and may result in poor performance and damage to your device and its enhancements. It may also invalidate any approval or warranty applying to the device.To find out more about original Nokia batteries, visit www.nokia.com/battery. Care and maintenanceYour device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, remove the battery, and allow the device to dry completely before replacing it.• Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged.• Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.• Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards.• Do not attempt to open the device other than as instructed in this guide.• Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
Product safety110• Do not paint the device. Paint can clog the moving parts and prevent proper operation.• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor, and light sensor lenses).• Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices.• Use chargers indoors.• Always create a backup of data you want to keep (such as contacts and calendar notes) before sending your device to a service facility.• To allow the device to reset, power the device off, and remove the battery from time to time for optimum performance. Make back-up copies of all important data.All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service.Additional safety informationYour device and its enhancements may contain small parts. Keep them out of the reach of small children.Operating environmentRemember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used either in the normal use position against the ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body. When a carry case, belt clip, or holder is used for body-worn operation, it should not contain metal and should position the device the above-stated distance from your body.In order to transmit data files or messages, this device requires a good quality connection to the network. In some cases, transmission of data files or messages may be delayed until such a connection is available. Ensure the above separation distance instructions are followed until the transmission is completed.Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.Medical devicesOperation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of
Product safety111FCC DRAFTinadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.PacemakersPacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should:• Always keep the device more than 15.3 centimeters (6 inches) from their pacemaker• Not carry the device in a breast pocket• Hold the device to the ear opposite the pacemaker to minimize the potential for interference.If you suspect interference, switch off your device, and move the device away.Hearing aidsSome digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer or its representative of your vehicle or any equipment that has been added.Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is
Product safety112improperly installed and the air bag inflates, serious injury could result.Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless teledevices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere, and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas, chemical plants or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders.Emergency calls Important: Wireless phones, including this device, operate using radio signals, wireless networks, landline networks, and user-programmed functions. Because of this, connections in all conditions cannot be guaranteed. You should never rely solely on any wireless device for essential communications like medical emergencies.To make an emergency call:1If the device is not on, switch it on. Check for adequate signal strength. Some networks may require that a valid SIM card is properly inserted in the device.2Press the end key as many times as needed to clear the display and ready the device for calls. 3Enter the official emergency number for your present location. Emergency numbers vary by location.4Press the call key.If certain features are in use, you may first need to turn those features off before you can make an emergency call. Consult this guide or your service provider for more information.When making an emergency call, give all the necessary information as accurately as possible. Your wireless device may be the only means of communication at the scene of an accident. Do not end the call until given permission to do so.
Product safety113FCC DRAFTCertification information (SAR)THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health.The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands. The actual SAR level of an operating device can be below the maximum value because the device is designed to use only the power required to reach the network. That amount changes depending on a number of factors such as how close you are to a network base station. The highest SAR value under the ICNIRP guidelines for use of the device at the ear is 0.87 W/kg. Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Additional SAR information may be provided under product information at www.nokia.com. Your mobile device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA) and Industry Canada. These requirements set a SAR limit of 1.6 W/kg averaged over 1 gram of tissue. The highest SAR value reported under this standard during product certification for use at the ear is 1.06 W/kg and when properly worn on the body is 0.59 W/kg. Information about this device model can be found at http://www.fcc.gov/oet/fccid by searching the equipment authorization system using FCC ID: QFXRM-132.
Product safety114Technical InformationFeature SpecificationWeight 115 g (4.1 oz)SizeVolume: 89.1 cm3 (5.4 in3)Length: 110 mm (4.3 in)Width: 49 mm (1.9 in)Thickness: 19 mm (0.75 in)Frequency rangeRM-132 GSM 850824–849 MHz (TX)869–894 MHz (RX)GSM 900880–915 MHz (TX)925–960 MHz (RX)GSM 18001710–1785 MHz (TX)1805–1865 MHz (RX)GSM 19001850–1910 MHz (TX)1930–1990 MHz (RX)Transmitter output power Up to 2 WBattery voltage BP-6M, 1100 mAh, 3.7 V Operating temperature15°C to + 25°C(59°F to + 77°F)Feature Specification
115FCC DRAFTIndexNumerics1-touch dialing 65Aaccess points 94accessoriesSee enhancementsactivation keysSee digital rights managementactive standby mode 91alarm clock 45application manager 101applicationsinstalling 101Java 101removing 102Bbatteriescharging 10intended for use 9Bluetooth 76device address 78headset 100pairing 78security 77sending data 78switching off 79bookmarks 70browse Internet 71Ccache, clearing 72calculator 83calendarcreating entries 46deleting entries 47settings 47synchronizing Nokia PC Suite 46call logSee logcallsanswering 66declining 66duration 67forwarding 99international 64making 64missed 67options 66received 67restricting 99settings 93transferring 66waiting 66cameraactive toolbar 18adjusting lighting and color 21editing videos 30flash 21image setup settings 21saving video clips 23self-timer 22sequence mode 22still image camera settings 20video recorder settings 24cell broadcast 60certificates 97chargers 9clock 45codes 96, 97security code 97computer connections 80conference call 64connection settings 94contact cards 61
116inserting pictures 61sending 61storing touch tones 67contact information 16converter 83copyingcontacts between the SIM card and device memory 62copyright protectionSee digital rights managementDdata cable 80data connectionsdetails 81ending 81establishing 94indicators 11network 8, 99settingsdate 45delivery reportsdenying 58erasing 68receiving 58device manager 82dictionary 49digital certificatesSee certificatesdigital rights management 103Download! 15DRMSee digital rights managementEedit images 29editing videos 30e-mailautomatic retrieving 55creating 48deleting messages 55opening 55remote mailbox 54retrieving from mailbox 54saving 60sending 50settings 58viewing attachments 55writing 50emergency calls 8enhancements 100Ffile formats.jad 101.jar 101, 102.sis 101RealPlayer 41file manager 14fixed dialing 63FM radio 39Ggallery 26active toolbar 27edit images 29free memory 28ordering files in albums 28, 34presentations 32print basket 28print images 32slide show 31games 15GPRSSee data connectionsHhands-free operationSee loudspeakerheadsetconnecting 13settings 100help application 16Iidle sceenSee standby modeindicators 11
117infrared, connection 79installing applications 101InternetSee WebInternet access points (IAP)See access pointsJJavaSee applicationsLlanguage settings 92lock code 97logerasing contents 68filtering 68log duration 68loopset settings 100loudspeaker 12Mmailbox 54media filesfile formats 41memoryclearing memory 14, 67viewing memory consumption 14memory card tool 13menu, rearranging 88messagingcell broadcast 60e-mail 50inbox 52mailbox 54multimedia messages 50settings 56text messages 50miniSD cards 13missed calls 67MMSSee multimedia messagesmovies, muveescustom muvees 43quick muvees 43multimedia key 12multimedia messagescreating 48receiving 52retrieving 53saving 60sending 50settings 57music player 37Nnetwork services 8Nokia PC Suitecalendar data 46synchronization 80transferring music files to your memory card 37viewing device memory data 14notes 83Ooffice applications 84Ppacket data connectionssettings 95PC connections 80PC Suitesee Nokia PC Suitepersonalization 90phonebookSee contact cardsPIN codes 97predictive text input 49print images 32printingcalendar entries 47contact cards 61e-mails 55multimedia messages 53notes 83text messages 53profiles 88
118protocolsIMAP4 58IPv4 and IPv6 95POP3 58TCP/IP 9WAP 9PUK codes 97QQuickoffice 84Rradio 39RealPlayer 41recent calls 67recorder 84remote mailbox 54remote SIM mode 77reportsSee delivery reportsringing tones3-D 89personal ringing tone 63receiving in a text message 53See also profilesSsafetyemergency calls 8guidelines 7scenesimage scenes 22video scenes 22security codeSee lock codesendingcontact cards, business cards 61video clips 31service commands 49ServicesSee Websettingsaccess codes 96access points 94Bluetooth connectivity 77calendar 47call forwarding 99call restricting 99certificates 97clock 45data connections 94date and time 96display 93e-mail 58language 92lock code 97messaging 56MMS and e-mail 52multimedia messages 57original settings 92personalizing the phone 88PIN code 97screen saver 93SIP 96text messages 56UPIN code 97UPUK code 97SIM cardcopying names and numbers to your device 62messages 56names and numbers 62sis file 101SMSsee text messagessnooze 45softwareinstalling applications 101removing applications 102transferring a file to your device 101sound clips 26soundsadjusting volume 12muting a ringing tone 66recording sounds 84
119speaker phoneSee loudspeakerstandby mode 88support information 16svg files 32synchronization 81Ttext input 49text messagescharacter limit 51creating 48inbox 48receiving 52saving 60sending 50, 51settings 56writing 49, 51themes 90time 45tonesSee ringing tonestraditional text input 49transferring content from another device 10troubleshooting 104tutorial 16UUPIN code 97UPUK code 97USSD commands 49Vvideo clips 26video playerSee RealPlayerVisual Radio 39voice commands 100voice dialing 65voice mailbox 64changing the phone number 64forwarding calls to voice mailbox 99voice messages 64voice tags 100making calls 65volume controladjusting volume 12during a call 64loudspeaker 12Wwallpaperschanging 90using pictures 20, 27Webaccess points, See access pointsadditional browser 73blogs 74browser 70feeds 74service messages 54

Navigation menu